COLUBRIS-802DOT11-MIB

File: COLUBRIS-802DOT11-MIB.mib (147763 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB COLUBRIS-VIRTUAL-AP-MIB COLUBRIS-SMI
COLUBRIS-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Unsigned32 Counter32
IpAddress TimeTicks TEXTUAL-CONVENTION
DisplayString MacAddress TruthValue
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
ifIndex ifDescr InterfaceIndex
coVirtualAccessPointConfigEntry coVirtualApSSID colubrisMgmtV2
ColubrisSSID ColubrisSSIDOrNone ColubrisNotificationEnable
ColubrisDataRate ColubrisRadioType

Defined Types

WEPKeytype  
Textual conventions from 802 definitions.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0|5|13)  

CoDot11AccessPointConfigEntry  
SEQUENCE    
  coDot11RelayBetweenStation TruthValue
  coDot11BeaconPeriod Integer32
  coDot11DTIMPeriod Integer32
  coDot11PrivacyOptionImplemented TruthValue
  coDot11RSNAOptionImplemented TruthValue
  coDot11NumberOfUsers Unsigned32
  coDot11AddToAssociationNotification TruthValue
  coDot11PhyTxPowerAdminLevel Integer32
  coDot11PhyTxPowerOperLevel Integer32
  coDot11CurrentSNRLevel Integer32
  coDot11BSSID MacAddress
  coDot11AdminMinimumDataRate ColubrisDataRate
  coDot11AdminMaximumDataRate ColubrisDataRate
  coDot11HighThroughputOptionImplemented TruthValue

CoDot11AuthenticationAlgorithmsEntry  
SEQUENCE    
  coDot11AuthenticationAlgorithmsIndex Integer32
  coDot11AuthenticationAlgorithm INTEGER
  coDot11AuthenticationAlgorithmsEnable TruthValue

CoDot11WEPDefaultKeysEntry  
SEQUENCE    
  coDot11WEPDefaultKey1Value WEPKeytype
  coDot11WEPDefaultKey2Value WEPKeytype
  coDot11WEPDefaultKey3Value WEPKeytype
  coDot11WEPDefaultKey4Value WEPKeytype

CoDot11PrivacyEntry  
SEQUENCE    
  coDot11PrivacyInvoked TruthValue
  coDot11WEPDefaultKeyID Integer32
  coDot11ExcludeUnencrypted TruthValue
  coDot11WEPICVErrorCount Counter32
  coDot11WEPExcludedCount Counter32
  coDot11RSNAEnabled TruthValue

CoDot11AssociationEntry  
SEQUENCE    
  coDot11AssociationIndex Integer32
  coDot11StationMACAddress MacAddress
  coDot11StationConnectTime Counter32
  coDot11SignalLevel Integer32
  coDot11NoiseLevel Integer32
  coDot11SNR Integer32
  coDot11PktsRate1 Counter32
  coDot11PktsRate2 Counter32
  coDot11PktsRate5dot5 Counter32
  coDot11PktsRate11 Counter32
  coDot11PktsRate6 Counter32
  coDot11PktsRate9 Counter32
  coDot11PktsRate12 Counter32
  coDot11PktsRate18 Counter32
  coDot11PktsRate24 Counter32
  coDot11PktsRate36 Counter32
  coDot11PktsRate48 Counter32
  coDot11PktsRate54 Counter32
  coDot11TransmitRate Unsigned32
  coDot11ReceiveRate Unsigned32
  coDot11InPkts Counter32
  coDot11OutPkts Counter32
  coDot11InOctets Counter32
  coDot11OutOctets Counter32
  coDot11StationSSID ColubrisSSIDOrNone
  coDot11StationName OCTET STRING
  coDot11StationIPAddress IpAddress
  coDot11StationVLAN Integer32
  coDot11StationLocalInterface InterfaceIndex
  coDot11StaHT TruthValue
  coDot11StaEncryptionType INTEGER
  coDot11PktsTxRate1 Counter32
  coDot11PktsTxRate2 Counter32
  coDot11PktsTxRate5dot5 Counter32
  coDot11PktsTxRate11 Counter32
  coDot11PktsTxRate6 Counter32
  coDot11PktsTxRate9 Counter32
  coDot11PktsTxRate12 Counter32
  coDot11PktsTxRate18 Counter32
  coDot11PktsTxRate24 Counter32
  coDot11PktsTxRate36 Counter32
  coDot11PktsTxRate48 Counter32
  coDot11PktsTxRate54 Counter32

CoDot11WDSPortEntry  
SEQUENCE    
  coDot11WDSPortIndex Integer32
  coDot11WDSPortMacAddress MacAddress
  coDot11WDSPortCurrentRate Unsigned32
  coDot11WDSPortSNRLevel Integer32
  coDot11WDSPortTxPackets Counter32
  coDot11WDSPortTxDropped Counter32
  coDot11WDSPortTxErrors Counter32
  coDot11WDSPortRxPackets Counter32
  coDot11WDSPortRxDropped Counter32
  coDot11WDSPortRxErrors Counter32

CoDot11ScanEntry  
SEQUENCE    
  coDot11ScanIndex Integer32
  coDot11ScanMacAddress MacAddress
  coDot11ScanChannel Integer32
  coDot11ScanSSID ColubrisSSIDOrNone
  coDot11ScanSignalLevel Integer32
  coDot11ScanNoiseLevel Integer32
  coDot11ScanSNR Integer32
  coDot11ScanStatus INTEGER
  coDot11ScanPHYType INTEGER
  coDot11ScanInactivityTime TimeTicks
  coDot11ScanNetworkType INTEGER
  coDot11ScanSecurity INTEGER

CoDot11StationHTEntry  
SEQUENCE    
  coDot11StaTransmitMCS Unsigned32
  coDot11StaReceiveMCS Unsigned32
  coDot11StaChannelWidth INTEGER
  coDot11StaShortGI TruthValue
  coDot11StaPktsTxMCS0 Counter32
  coDot11StaPktsTxMCS1 Counter32
  coDot11StaPktsTxMCS2 Counter32
  coDot11StaPktsTxMCS3 Counter32
  coDot11StaPktsTxMCS4 Counter32
  coDot11StaPktsTxMCS5 Counter32
  coDot11StaPktsTxMCS6 Counter32
  coDot11StaPktsTxMCS7 Counter32
  coDot11StaPktsTxMCS8 Counter32
  coDot11StaPktsTxMCS9 Counter32
  coDot11StaPktsTxMCS10 Counter32
  coDot11StaPktsTxMCS11 Counter32
  coDot11StaPktsTxMCS12 Counter32
  coDot11StaPktsTxMCS13 Counter32
  coDot11StaPktsTxMCS14 Counter32
  coDot11StaPktsTxMCS15 Counter32
  coDot11StaPktsRxMCS0 Counter32
  coDot11StaPktsRxMCS1 Counter32
  coDot11StaPktsRxMCS2 Counter32
  coDot11StaPktsRxMCS3 Counter32
  coDot11StaPktsRxMCS4 Counter32
  coDot11StaPktsRxMCS5 Counter32
  coDot11StaPktsRxMCS6 Counter32
  coDot11StaPktsRxMCS7 Counter32
  coDot11StaPktsRxMCS8 Counter32
  coDot11StaPktsRxMCS9 Counter32
  coDot11StaPktsRxMCS10 Counter32
  coDot11StaPktsRxMCS11 Counter32
  coDot11StaPktsRxMCS12 Counter32
  coDot11StaPktsRxMCS13 Counter32
  coDot11StaPktsRxMCS14 Counter32
  coDot11StaPktsRxMCS15 Counter32

CoDot11DetectedStationEntry  
SEQUENCE    
  coDot11DetStaIndex Integer32
  coDot11DetStaMacAddress MacAddress
  coDot11DetStaChannel Integer32
  coDot11DetStaSignalLevel Integer32
  coDot11DetStaNoiseLevel Integer32
  coDot11DetStaNbProbeReq Counter32
  coDot11DetStaRate Unsigned32
  coDot11DetStaSSID ColubrisSSID
  coDot11DetStaTimeDiscovered Counter32
  coDot11DetStaTimeLastSeen Unsigned32

CoDot11OperationEntry  
SEQUENCE    
  coDot11MACAddress MacAddress
  coDot11RTSThreshold Integer32
  coDot11ShortRetryLimit Integer32
  coDot11LongRetryLimit Integer32
  coDot11FragmentationThreshold Integer32
  coDot11MaxTransmitMSDULifetime Unsigned32
  coDot11MaxReceiveLifetime Unsigned32
  coDot11ManufacturerID DisplayString
  coDot11ProductID DisplayString
  coDot11RadioType ColubrisRadioType
  coDot11StationDetectionState TruthValue

CoDot11CountersEntry  
SEQUENCE    
  coDot11TransmittedFragmentCount Counter32
  coDot11MulticastTransmittedFrameCount Counter32
  coDot11FailedCount Counter32
  coDot11RetryCount Counter32
  coDot11MultipleRetryCount Counter32
  coDot11FrameDuplicateCount Counter32
  coDot11RTSSuccessCount Counter32
  coDot11RTSFailureCount Counter32
  coDot11ACKFailureCount Counter32
  coDot11ReceivedFragmentCount Counter32
  coDot11MulticastReceivedFrameCount Counter32
  coDot11FCSErrorCount Counter32
  coDot11TransmittedFrameCount Counter32
  coDot11WEPUndecryptableCount Counter32

CoDot11PhyOperationEntry  
SEQUENCE    
  coDot11PHYType INTEGER
  coDot11CurrentRegDomain Integer32
  coDot11TempType INTEGER
  coDot11CurrentOperFrequency Unsigned32
  coDot11CurrentOperPHYType INTEGER
  coDot11Sensitivity INTEGER
  coDot11RadioEnabled TruthValue
  coDot11OperatingMode INTEGER
  coDot11AutoChannelEnabled TruthValue
  coDot11AutoChannelInterval INTEGER
  coDot11AutoPowerEnabled TruthValue
  coDot11AutoPowerInterval INTEGER

CoDot11PhyAntennaEntry  
SEQUENCE    
  coDot11CurrentTxAntenna Integer32
  coDot11DiversitySupport INTEGER
  coDot11CurrentRxAntenna Integer32

CoDot11PhyConfigEntry  
SEQUENCE    
  coDot11PhyAdminStatus INTEGER
  coDot11PhyOperStatus INTEGER

CoDot11PhyDSSSEntry  
SEQUENCE    
  coDot11CurrentChannel Integer32
  coDot11CCAModeSupported Integer32
  coDot11CurrentCCAMode INTEGER

CoDot11RegDomainsSupportedEntry  
SEQUENCE    
  coDot11RegDomainsSupportIndex Integer32
  coDot11RegDomainsSupportValue INTEGER

CoDot11AntennasListEntry  
SEQUENCE    
  coDot11AntennaListIndex Integer32
  coDot11SupportedTxAntenna TruthValue
  coDot11SupportedRxAntenna TruthValue
  coDot11DiversitySelectionRx TruthValue

CoDot11SupportedDataRatesTxEntry  
SEQUENCE    
  coDot11SupportedDataRatesTxIndex Integer32
  coDot11SupportedDataRatesTxValue Integer32

CoDot11SupportedDataRatesRxEntry  
SEQUENCE    
  coDot11SupportedDataRatesRxIndex Integer32
  coDot11SupportedDataRatesRxValue Integer32

CoDot11PhyOFDMEntry  
SEQUENCE    
  coDot11CurrentFrequency Integer32
  coDot11TIThreshold Integer32
  coDot11FrequencyBandsSupported Integer32

CoDot11PhyHTEntry  
SEQUENCE    
  coDot11FortyMHzOperationImplemented TruthValue
  coDot11FortyMHzOperationEnabled TruthValue
  coDot11CurrentPrimaryChannel Integer32
  coDot11CurrentSecondaryChannel Integer32
  coDot11GreenfieldOptionImplemented TruthValue
  coDot11GreenfieldOptionEnabled TruthValue
  coDot11ShortGIOptionInTwentyImplemented TruthValue
  coDot11ShortGIOptionInTwentyEnabled TruthValue
  coDot11ShortGIOptionInFortyImplemented TruthValue
  coDot11ShortGIOptionInFortyEnabled TruthValue
  coDot11HighestSupportedDataRate Integer32

CoDot11RSNAStatsEntry  
SEQUENCE    
  coDot11RSNAStatsVersion Unsigned32
  coDot11RSNAStatsSelectedPairwiseCipher OCTET STRING
  coDot11RSNAStatsTKIPICVErrors Counter32
  coDot11RSNAStatsTKIPLocalMICFailures Counter32
  coDot11RSNAStatsTKIPRemoteMICFailures Counter32
  coDot11RSNAStatsTKIPCounterMeasuresInvoked Counter32
  coDot11RSNAStatsCCMPFormatErrors Counter32
  coDot11RSNAStatsCCMPReplays Counter32
  coDot11RSNAStatsCCMPDecryptErrors Counter32
  coDot11RSNAStatsTKIPReplays Counter32
  coDot11RSNAStats4WayHandshakeFailures Counter32

Defined Values

colubris802dot11 1.3.6.1.4.1.8744.5.4
The MIB module for IEEE 802.11 entities.
MODULE-IDENTITY    

coDot11ap 1.3.6.1.4.1.8744.5.4.1
OBJECT IDENTIFIER    

coDot11mac 1.3.6.1.4.1.8744.5.4.2
OBJECT IDENTIFIER    

coDot11phy 1.3.6.1.4.1.8744.5.4.3
OBJECT IDENTIFIER    

coDot11AccessPointConfigTable 1.3.6.1.4.1.8744.5.4.1.1
WLAN profile configuration attributes. In tabular form to allow for multiple instances on an agent. Not supported on the M111.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11AccessPointConfigEntry

coDot11AccessPointConfigEntry 1.3.6.1.4.1.8744.5.4.1.1.1
An entry in the coDot11AccessPointConfigTable. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coVirtualWlanProfileIndex - Uniquely access a profile for this particular 802.11 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11AccessPointConfigEntry  

coDot11RelayBetweenStation 1.3.6.1.4.1.8744.5.4.1.1.1.1
Specifies if wireless client stations can exchange data with one another.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

coDot11BeaconPeriod 1.3.6.1.4.1.8744.5.4.1.1.1.2
Indicates the number of TUs that a station uses for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

coDot11DTIMPeriod 1.3.6.1.4.1.8744.5.4.1.1.1.3
Specifies the number of beacon intervals that elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames. Client stations use the DTIM to wake up from low-power mode to receive multicast traffic.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

coDot11PrivacyOptionImplemented 1.3.6.1.4.1.8744.5.4.1.1.1.4
Indicates if the IEEE 802.11 WEP option is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11RSNAOptionImplemented 1.3.6.1.4.1.8744.5.4.1.1.1.5
Indicates if the profile is RSNA-capable.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11NumberOfUsers 1.3.6.1.4.1.8744.5.4.1.1.1.6
Indicates the number of users connected via this profile.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

coDot11AddToAssociationNotification 1.3.6.1.4.1.8744.5.4.1.1.1.7
Specifies if an association trap notification is sent each time a user connects to this profile.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

coDot11PhyTxPowerAdminLevel 1.3.6.1.4.1.8744.5.4.1.1.1.8
Specifies the transmission power of the radio.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..23  

coDot11PhyTxPowerOperLevel 1.3.6.1.4.1.8744.5.4.1.1.1.9
Indicates the transmission power of the radio.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..23  

coDot11CurrentSNRLevel 1.3.6.1.4.1.8744.5.4.1.1.1.10
Average SNR level for all the connected client stations.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..92  

coDot11BSSID 1.3.6.1.4.1.8744.5.4.1.1.1.11
MAC Address assigned to this device.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

coDot11AdminMinimumDataRate 1.3.6.1.4.1.8744.5.4.1.1.1.12
Specifies the minimum transmission rate that clients stations must meet in order to connect with this profile. Client stations that are below this setting will not be able to connect. The value of this object must always be less or equal than the value of coDot11MaximumDataRate. Allowed values will change according to the state of the radio's wireless mode (coDot11CurrentOperPHYType). ieee802dot11b: Lowest, 1, 2, 5.5, 11 Mbps ieee802dot11a: Lowest, 6, 9, 12, 18, 24, 36, 48, 54 Mbps ieee802dot11g: Lowest, 6, 9, 12, 18, 24, 36, 48, 54 Mbps 11bAndg: All rates permitted.
Status: deprecated Access: read-write
OBJECT-TYPE    
  ColubrisDataRate  

coDot11AdminMaximumDataRate 1.3.6.1.4.1.8744.5.4.1.1.1.13
Specifies the maximum transmission rate that clients stations must respect to connect with this profile. Clients stations that attempt to associate at a higher data rate will be refused. The value of this object must always be greater than the value of coDot11MinimumDataRate. Allowed values will change according to the state of the radio's wireless mode (coDot11CurrentOperPHYType). ieee802dot11b: 1, 2, 5.5, 11Mbs, highest ieee802dot11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps, highest ieee802dot11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps, highest 11bAndg: All rates permitted.
Status: deprecated Access: read-write
OBJECT-TYPE    
  ColubrisDataRate  

coDot11HighThroughputOptionImplemented 1.3.6.1.4.1.8744.5.4.1.1.1.14
Indicates if the profile is 802.11n capable.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11AuthenticationAlgorithmsTable 1.3.6.1.4.1.8744.5.4.1.2
This (conceptual) table of attributes is a set of all the authentication algorithms supported by the stations. The following are the default values and the associated algorithm: Value = 1: Open System Value = 2: Shared Key
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11AuthenticationAlgorithmsEntry

coDot11AuthenticationAlgorithmsEntry 1.3.6.1.4.1.8744.5.4.1.2.1
An Entry (conceptual row) in the Authentication Algorithms Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11AuthenticationAlgorithmsIndex - Uniquely identify an algorithm in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11AuthenticationAlgorithmsEntry  

coDot11AuthenticationAlgorithmsIndex 1.3.6.1.4.1.8744.5.4.1.2.1.1
The auxiliary variable used to identify instances of the columnar objects in the Authentication Algorithms Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

coDot11AuthenticationAlgorithm 1.3.6.1.4.1.8744.5.4.1.2.1.2
Identifies all the authentication algorithms supported by the STAs. The following are the default values and the their associated algorithms. Value = 1: Open System Value = 2: Shared Key
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER openSystem(1), sharedKey(2)  

coDot11AuthenticationAlgorithmsEnable 1.3.6.1.4.1.8744.5.4.1.2.1.3
This attribute, when true at a station, enables the acceptance of the authentication algorithm described in the corresponding table entry in authentication frames received by the station that have odd authentication sequence numbers. The default value of this attribute is 'true' for the Open System table entry and 'false' for all other table entries.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11WEPDefaultKeysTable 1.3.6.1.4.1.8744.5.4.1.3
Conceptual table for WEP default keys. This table contains the four WEP default secret key values corresponding to the four possible KeyID values. The WEP default secret keys are logically WRITE-ONLY. Attempts to read the entries in this table will return unsuccessful status and values of null or zero. The default value of each WEP default key is null. This table is not supported on the M111.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11WEPDefaultKeysEntry

coDot11WEPDefaultKeysEntry 1.3.6.1.4.1.8744.5.4.1.3.1
An Entry (conceptual row) in the WEP Default Keys Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coVirtualWlanProfileIndex - Uniquely access a profile for this particular 802.11 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11WEPDefaultKeysEntry  

coDot11WEPDefaultKey1Value 1.3.6.1.4.1.8744.5.4.1.3.1.1
A WEP default secret key1 value. Reading this attribute will always return a Zero-Length string.
Status: current Access: read-write
OBJECT-TYPE    
  WEPKeytype  

coDot11WEPDefaultKey2Value 1.3.6.1.4.1.8744.5.4.1.3.1.2
A WEP default secret key2 value. Reading this attribute will always return a Zero-Length string.
Status: current Access: read-write
OBJECT-TYPE    
  WEPKeytype  

coDot11WEPDefaultKey3Value 1.3.6.1.4.1.8744.5.4.1.3.1.3
A WEP default secret key3 value. Reading this attribute will always return a Zero-Length string.
Status: current Access: read-write
OBJECT-TYPE    
  WEPKeytype  

coDot11WEPDefaultKey4Value 1.3.6.1.4.1.8744.5.4.1.3.1.4
A WEP default secret key4 value. Reading this attribute will always return a Zero-Length string.
Status: current Access: read-write
OBJECT-TYPE    
  WEPKeytype  

coDot11PrivacyTable 1.3.6.1.4.1.8744.5.4.1.4
Group containing attributes related to IEEE 802.11 Privacy. In tabular form to allow multiple instances on an agent. This table is not supported on the M111.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11PrivacyEntry

coDot11PrivacyEntry 1.3.6.1.4.1.8744.5.4.1.4.1
An entry in the coDot11PrivacyTable Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coVirtualWlanProfileIndex - Uniquely access a profile for this particular 802.11 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11PrivacyEntry  

coDot11PrivacyInvoked 1.3.6.1.4.1.8744.5.4.1.4.1.1
When this attribute is TRUE, it indicates that some level of security is invoked for transmitting frames of type Data. For IEEE 802.11-1999 clients, the security mechanism used is WEP. For RSNA-capable clients, an additional variable coDot11RSNAEnabled indicates whether RSNA is enabled. If coDot11RSNAEnabled is FALSE or the MIB variable does not exist, the security mechanism invoked is WEP; if coDot11RSNAEnabled is TRUE, RSNA security mechanisms invoked are configured in the coDot11RSNAConfigTable. The default value of this attribute is FALSE.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11WEPDefaultKeyID 1.3.6.1.4.1.8744.5.4.1.4.1.2
This attribute indicates the use of the first, second, third, or fourth element of the WEPDefaultKeys array when set to values of zero, one, two, or three. The default value of this attribute is 0.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

coDot11ExcludeUnencrypted 1.3.6.1.4.1.8744.5.4.1.4.1.3
When this attribute is true, the STA does not indicate at the MAC service interface received MSDUs that have the WEP subfield of the Frame Control field equal to zero. When this attribute is false, the STA may accept MSDUs that have the WEP subfield of the Frame Control field equal to zero. The default value of this attribute is true.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11WEPICVErrorCount 1.3.6.1.4.1.8744.5.4.1.4.1.4
This counter increments when a frame is received with the WEP subfield of the Frame Control field set to one and the value of the ICV as received in the frame does not match the ICV value that is calculated for the contents of the received frame. ICV errors for TKIP are not counted in this variable but in coDot11RSNAStatsTKIPICVErrors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11WEPExcludedCount 1.3.6.1.4.1.8744.5.4.1.4.1.5
This counter increments when a frame is received with the WEP subfield of the Frame Control field set to zero and the value of coDot11ExcludeUnencrypted causes that frame to be discarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11RSNAEnabled 1.3.6.1.4.1.8744.5.4.1.4.1.6
Indicates if RSNA is enabled, which means that the RSN Information Element is advertised in Beacons and Probe Responses. This object requires that coDot11PrivacyInvoked also be set to TRUE.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11AssociationTable 1.3.6.1.4.1.8744.5.4.1.5
Group containing attributes related to associated stations. In tabular form to allow multiple instances on an agent. This table is not supported on the M111.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11AssociationEntry

coDot11AssociationEntry 1.3.6.1.4.1.8744.5.4.1.5.1
An entry in the coDot11Association Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11AssociationIndex - Uniquely identify a device inside the association table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11AssociationEntry  

coDot11AssociationIndex 1.3.6.1.4.1.8744.5.4.1.5.1.1
The auxiliary variable used to identify instances of the columnar objects in the Association Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

coDot11StationMACAddress 1.3.6.1.4.1.8744.5.4.1.5.1.2
Unique MAC Address assigned to the device.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

coDot11StationConnectTime 1.3.6.1.4.1.8744.5.4.1.5.1.3
Elapsed time in seconds since a station has associated to this device.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11SignalLevel 1.3.6.1.4.1.8744.5.4.1.5.1.4
Strength of the wireless signal.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coDot11NoiseLevel 1.3.6.1.4.1.8744.5.4.1.5.1.5
Level of local background noise.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coDot11SNR 1.3.6.1.4.1.8744.5.4.1.5.1.6
Relative strength of the signal level compared to the noise level.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coDot11PktsRate1 1.3.6.1.4.1.8744.5.4.1.5.1.7
Number of frames received at 1 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsRate2 1.3.6.1.4.1.8744.5.4.1.5.1.8
Number of frames received at 2 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsRate5dot5 1.3.6.1.4.1.8744.5.4.1.5.1.9
Number of frames received at 5.5 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsRate11 1.3.6.1.4.1.8744.5.4.1.5.1.10
Number of frames received at 11 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsRate6 1.3.6.1.4.1.8744.5.4.1.5.1.11
Number of frames received at 6 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsRate9 1.3.6.1.4.1.8744.5.4.1.5.1.12
Number of frames received at 9 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsRate12 1.3.6.1.4.1.8744.5.4.1.5.1.13
Number of frames received at 12 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsRate18 1.3.6.1.4.1.8744.5.4.1.5.1.14
Number of frames received at 18 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsRate24 1.3.6.1.4.1.8744.5.4.1.5.1.15
Number of frames received at 24 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsRate36 1.3.6.1.4.1.8744.5.4.1.5.1.16
Number of frames received at 36 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsRate48 1.3.6.1.4.1.8744.5.4.1.5.1.17
Number of frames received at 48 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsRate54 1.3.6.1.4.1.8744.5.4.1.5.1.18
Number of frames received at 54 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11TransmitRate 1.3.6.1.4.1.8744.5.4.1.5.1.19
Current transmit rate of a station.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

coDot11ReceiveRate 1.3.6.1.4.1.8744.5.4.1.5.1.20
Current receive rate of a station.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

coDot11InPkts 1.3.6.1.4.1.8744.5.4.1.5.1.21
Number of packets received from the station after the association.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11OutPkts 1.3.6.1.4.1.8744.5.4.1.5.1.22
Number of packets send to the station after the association.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11InOctets 1.3.6.1.4.1.8744.5.4.1.5.1.23
Number of octets received from the station after the association.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11OutOctets 1.3.6.1.4.1.8744.5.4.1.5.1.24
Number of octets send to the station after the association.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StationSSID 1.3.6.1.4.1.8744.5.4.1.5.1.25
SSID of the associated station.
Status: current Access: read-only
OBJECT-TYPE    
  ColubrisSSIDOrNone  

coDot11StationName 1.3.6.1.4.1.8744.5.4.1.5.1.26
Name of the associated station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

coDot11StationIPAddress 1.3.6.1.4.1.8744.5.4.1.5.1.27
IP address of the associated station.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

coDot11StationVLAN 1.3.6.1.4.1.8744.5.4.1.5.1.28
VLAN ID of the associated station. This object is always available on autonomous APs. However, on access-controller APs, this object is only available under certain conditions, when the client station is connected to a profile that is not access-controlled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4094  

coDot11StationLocalInterface 1.3.6.1.4.1.8744.5.4.1.5.1.29
Specifies the Local Interface where the associated station traffic will be forwarded to.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

coDot11StaHT 1.3.6.1.4.1.8744.5.4.1.5.1.30
Indicates that the associated station is HT.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11StaEncryptionType 1.3.6.1.4.1.8744.5.4.1.5.1.31
Indicates the encryption type used by the wireless station.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), wep(2), tkip(3), aes(4)  

coDot11PktsTxRate1 1.3.6.1.4.1.8744.5.4.1.5.1.32
Number of frames transmitted at 1 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsTxRate2 1.3.6.1.4.1.8744.5.4.1.5.1.33
Number of frames transmitted at 2 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsTxRate5dot5 1.3.6.1.4.1.8744.5.4.1.5.1.34
Number of frames transmitted at 5.5 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsTxRate11 1.3.6.1.4.1.8744.5.4.1.5.1.35
Number of frames transmitted at 11 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsTxRate6 1.3.6.1.4.1.8744.5.4.1.5.1.36
Number of frames transmitted at 6 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsTxRate9 1.3.6.1.4.1.8744.5.4.1.5.1.37
Number of frames transmitted at 9 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsTxRate12 1.3.6.1.4.1.8744.5.4.1.5.1.38
Number of frames transmitted at 12 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsTxRate18 1.3.6.1.4.1.8744.5.4.1.5.1.39
Number of frames transmitted at 18 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsTxRate24 1.3.6.1.4.1.8744.5.4.1.5.1.40
Number of frames transmitted at 24 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsTxRate36 1.3.6.1.4.1.8744.5.4.1.5.1.41
Number of frames transmitted at 36 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsTxRate48 1.3.6.1.4.1.8744.5.4.1.5.1.42
Number of frames transmitted at 48 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PktsTxRate54 1.3.6.1.4.1.8744.5.4.1.5.1.43
Number of frames transmitted at 54 Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11WDSPortTable 1.3.6.1.4.1.8744.5.4.1.6
Conceptual table for the local mesh links. This table contains the six local mesh MAC address. This table is not supported on the M111.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11WDSPortEntry

coDot11WDSPortEntry 1.3.6.1.4.1.8744.5.4.1.6.1
An Entry (conceptual row) in the WDS Port Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11WDSPortIndex - Uniquely identify a local mesh link inside the local mesh table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11WDSPortEntry  

coDot11WDSPortIndex 1.3.6.1.4.1.8744.5.4.1.6.1.1
The auxiliary variable used to identify instances of local mesh links.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..6  

coDot11WDSPortMacAddress 1.3.6.1.4.1.8744.5.4.1.6.1.2
MAC address of the remote device on the other side of the local mesh link.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

coDot11WDSPortCurrentRate 1.3.6.1.4.1.8744.5.4.1.6.1.3
Current rate of the local mesh link.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

coDot11WDSPortSNRLevel 1.3.6.1.4.1.8744.5.4.1.6.1.4
Relative strength of the signal level compared to the noise level.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coDot11WDSPortTxPackets 1.3.6.1.4.1.8744.5.4.1.6.1.5
Number of packets transmitted on this local mesh link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11WDSPortTxDropped 1.3.6.1.4.1.8744.5.4.1.6.1.6
Number of packets that could not be transmitted on this local mesh link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11WDSPortTxErrors 1.3.6.1.4.1.8744.5.4.1.6.1.7
Number of packets that could not be sent due to the following reasons: Rx retry limit exceeded or Tx discarded because of wrong SA.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11WDSPortRxPackets 1.3.6.1.4.1.8744.5.4.1.6.1.8
Number of packets received on this local mesh link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11WDSPortRxDropped 1.3.6.1.4.1.8744.5.4.1.6.1.9
Number of packets that were dropped on this local mesh link due to a lack of resources.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11WDSPortRxErrors 1.3.6.1.4.1.8744.5.4.1.6.1.10
Number of packets that could not be received due to the following reasons: Rx discards WEP excluded, Rx discards WEP ICV error, Rx MSG in bad MSG fragments, Rx MSG in MSG fragments Rx WEP undecryptable, Rx FCS errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11ScanTable 1.3.6.1.4.1.8744.5.4.1.7
Conceptual table for the AP scanning results. In tabular form to allow multiple instances on an agent. This table is not supported on the WCB-200.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11ScanEntry

coDot11ScanEntry 1.3.6.1.4.1.8744.5.4.1.7.1
An Entry (conceptual row) in the AP scan Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11ScanIndex - Uniquely identify an AP in the scan Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11ScanEntry  

coDot11ScanIndex 1.3.6.1.4.1.8744.5.4.1.7.1.1
The auxiliary variable used to identify instances of AP in the scan table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

coDot11ScanMacAddress 1.3.6.1.4.1.8744.5.4.1.7.1.2
The wireless MAC address of the remote device.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

coDot11ScanChannel 1.3.6.1.4.1.8744.5.4.1.7.1.3
The operating frequency channel of the remote device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

coDot11ScanSSID 1.3.6.1.4.1.8744.5.4.1.7.1.4
The Service Set ID broadcast by the remote device.
Status: current Access: read-only
OBJECT-TYPE    
  ColubrisSSIDOrNone  

coDot11ScanSignalLevel 1.3.6.1.4.1.8744.5.4.1.7.1.5
Strength of the wireless signal.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coDot11ScanNoiseLevel 1.3.6.1.4.1.8744.5.4.1.7.1.6
Level of local background noise.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coDot11ScanSNR 1.3.6.1.4.1.8744.5.4.1.7.1.7
Relative strength of the signal level compared to the noise level.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coDot11ScanStatus 1.3.6.1.4.1.8744.5.4.1.7.1.8
The status of the scanned device. 'unknown': The device could not determine the status of the scanned AP. 'authorized': The AP is part of the authorized list of APs. 'unauthorized': The AP is not part of the authorized list of APs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), authorized(1), unauthorized(2)  

coDot11ScanPHYType 1.3.6.1.4.1.8744.5.4.1.7.1.9
Radio type used by the device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ieee802dot11a(1), ieee802dot11b(2), ieee802dot11g(3), ieee802dot11na(4), ieee802dot11ng(5)  

coDot11ScanInactivityTime 1.3.6.1.4.1.8744.5.4.1.7.1.10
Elapsed time since the last beacon was seen for this device.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

coDot11ScanNetworkType 1.3.6.1.4.1.8744.5.4.1.7.1.11
Network type used by the device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ess(1), ibss(2)  

coDot11ScanSecurity 1.3.6.1.4.1.8744.5.4.1.7.1.12
Indicates the WPA/Encryption type used by the wireless station.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), wep(2), wpa(3), wpa2(4), wpaAndWpa2(5)  

coDot11ScanEnabled 1.3.6.1.4.1.8744.5.4.1.8
Specifies if periodic scan should be performed or not. Not supported on the WCB-200. 'enable': Enables periodic scans on this device. 'disable': Disable periodic scans on this device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

coDot11ScanPeriodicity 1.3.6.1.4.1.8744.5.4.1.9
Specifies the time between periodic scans. Each time a scan operation is performed, only one frequency is scanned. A fair amount of periodic scans are needed in order complete a full scan of all the supported frequencies. This parameter only applies when coDot11ScanEnabled is set to 'enable'. Not supported on the M111.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..3600  

coDot11ScanAuthorizedListURL 1.3.6.1.4.1.8744.5.4.1.10
Specifies the URL of the file that contains a list of all authorized access points. If no valid URL is present in this field, the AP will not be able to compute the rogue table. The format of this file is XML. Each entry in the file is composed of two items: MAC address and SSID. Each entry should appear on a new line. Not supported on the M111.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

coDot11UnauthorizedAPNotificationEnabled 1.3.6.1.4.1.8744.5.4.1.11
Specifies if periodic coDot11UnauthorizedAPNotification events are generated. Not supported on the M111.
Status: current Access: read-write
OBJECT-TYPE    
  ColubrisNotificationEnable  

coDot11UnauthorizedAPNotificationInterval 1.3.6.1.4.1.8744.5.4.1.12
Interval in minutes between unauthorized AP notifications. Not supported on the M111.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1000000  

coDot11AssociationNotificationEnabled 1.3.6.1.4.1.8744.5.4.1.13
Specifies if coDot11AssociationNotification events are generated. Not supported on the M111.
Status: current Access: read-write
OBJECT-TYPE    
  ColubrisNotificationEnable  

coDot11AssociationNotificationInterval 1.3.6.1.4.1.8744.5.4.1.14
Interval in minutes between association notifications. Setting this attribute to 0 will disable periodic sending of association notification. Not supported on the M111.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000000  

coDot11StationHTTable 1.3.6.1.4.1.8744.5.4.1.15
Group containing attributes related to HT stations. This table is not supported on the WCB-200.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11StationHTEntry

coDot11StationHTEntry 1.3.6.1.4.1.8744.5.4.1.15.1
An entry in the station HT Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11AssociationIndex - Uniquely identify a device inside the association table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11StationHTEntry  

coDot11StaTransmitMCS 1.3.6.1.4.1.8744.5.4.1.15.1.1
MCS used while trasnmitting the last frame to the HT station.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

coDot11StaReceiveMCS 1.3.6.1.4.1.8744.5.4.1.15.1.2
MCS used by the last frame received from the HT station.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

coDot11StaChannelWidth 1.3.6.1.4.1.8744.5.4.1.15.1.3
Channel width used by the wireless client.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cw20MHz(1), cw40MHz(2)  

coDot11StaShortGI 1.3.6.1.4.1.8744.5.4.1.15.1.4
Indicates if the wireless client is using short GI.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11StaPktsTxMCS0 1.3.6.1.4.1.8744.5.4.1.15.1.5
Number of transmitted frames while using MCS0.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS1 1.3.6.1.4.1.8744.5.4.1.15.1.6
Number of transmitted frames while using MCS1.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS2 1.3.6.1.4.1.8744.5.4.1.15.1.7
Number of transmitted frames while using MCS2.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS3 1.3.6.1.4.1.8744.5.4.1.15.1.8
Number of transmitted frames while using MCS3.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS4 1.3.6.1.4.1.8744.5.4.1.15.1.9
Number of transmitted frames while using MCS4.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS5 1.3.6.1.4.1.8744.5.4.1.15.1.10
Number of transmitted frames while using MCS5.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS6 1.3.6.1.4.1.8744.5.4.1.15.1.11
Number of transmitted frames while using MCS6.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS7 1.3.6.1.4.1.8744.5.4.1.15.1.12
Number of transmitted frames while using MCS7.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS8 1.3.6.1.4.1.8744.5.4.1.15.1.13
Number of transmitted frames while using MCS8.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS9 1.3.6.1.4.1.8744.5.4.1.15.1.14
Number of transmitted frames while using MCS9.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS10 1.3.6.1.4.1.8744.5.4.1.15.1.15
Number of transmitted frames while using MCS10.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS11 1.3.6.1.4.1.8744.5.4.1.15.1.16
Number of transmitted frames while using MCS11.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS12 1.3.6.1.4.1.8744.5.4.1.15.1.17
Number of transmitted frames while using MCS12.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS13 1.3.6.1.4.1.8744.5.4.1.15.1.18
Number of transmitted frames while using MCS13.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS14 1.3.6.1.4.1.8744.5.4.1.15.1.19
Number of transmitted frames while using MCS14.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsTxMCS15 1.3.6.1.4.1.8744.5.4.1.15.1.20
Number of transmitted frames while using MCS15.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS0 1.3.6.1.4.1.8744.5.4.1.15.1.21
Number of received frames while using MCS0.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS1 1.3.6.1.4.1.8744.5.4.1.15.1.22
Number of received frames while using MCS1.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS2 1.3.6.1.4.1.8744.5.4.1.15.1.23
Number of received frames while using MCS2.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS3 1.3.6.1.4.1.8744.5.4.1.15.1.24
Number of received frames while using MCS3.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS4 1.3.6.1.4.1.8744.5.4.1.15.1.25
Number of received frames while using MCS4.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS5 1.3.6.1.4.1.8744.5.4.1.15.1.26
Number of received frames while using MCS5.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS6 1.3.6.1.4.1.8744.5.4.1.15.1.27
Number of received frames while using MCS6.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS7 1.3.6.1.4.1.8744.5.4.1.15.1.28
Number of received frames while using MCS7.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS8 1.3.6.1.4.1.8744.5.4.1.15.1.29
Number of received frames while using MCS8.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS9 1.3.6.1.4.1.8744.5.4.1.15.1.30
Number of received frames while using MCS9.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS10 1.3.6.1.4.1.8744.5.4.1.15.1.31
Number of received frames while using MCS10.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS11 1.3.6.1.4.1.8744.5.4.1.15.1.32
Number of received frames while using MCS11.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS12 1.3.6.1.4.1.8744.5.4.1.15.1.33
Number of received frames while using MCS12.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS13 1.3.6.1.4.1.8744.5.4.1.15.1.34
Number of received frames while using MCS13.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS14 1.3.6.1.4.1.8744.5.4.1.15.1.35
Number of received frames while using MCS14.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11StaPktsRxMCS15 1.3.6.1.4.1.8744.5.4.1.15.1.36
Number of received frames while using MCS15.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11NbDetectedStation 1.3.6.1.4.1.8744.5.4.1.16
Number of stations in the detected station table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

coDot11DetectedStationTable 1.3.6.1.4.1.8744.5.4.1.17
Group containing attributes related to stations sending probe request. This table is not supported on the M111.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11DetectedStationEntry

coDot11DetectedStationEntry 1.3.6.1.4.1.8744.5.4.1.17.1
An entry in the detected station Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11DetStaIndex - Uniquely identify a device inside the detected station table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11DetectedStationEntry  

coDot11DetStaIndex 1.3.6.1.4.1.8744.5.4.1.17.1.1
The auxiliary variable used to identify instances of the columnar objects in the detected station table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

coDot11DetStaMacAddress 1.3.6.1.4.1.8744.5.4.1.17.1.2
MAC address of the wireless client.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

coDot11DetStaChannel 1.3.6.1.4.1.8744.5.4.1.17.1.3
The operating frequency channel when the last probe request was received.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

coDot11DetStaSignalLevel 1.3.6.1.4.1.8744.5.4.1.17.1.4
Strength of the wireless signal.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coDot11DetStaNoiseLevel 1.3.6.1.4.1.8744.5.4.1.17.1.5
Level of local background noise.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coDot11DetStaNbProbeReq 1.3.6.1.4.1.8744.5.4.1.17.1.6
Total number of probes request received from this client.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11DetStaRate 1.3.6.1.4.1.8744.5.4.1.17.1.7
Receive rate of the last probe request received from this client.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

coDot11DetStaSSID 1.3.6.1.4.1.8744.5.4.1.17.1.8
SSID contained in the last probe request received from this client.
Status: current Access: read-only
OBJECT-TYPE    
  ColubrisSSID  

coDot11DetStaTimeDiscovered 1.3.6.1.4.1.8744.5.4.1.17.1.9
Elapsed time in seconds since the first probe has been received from this client.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11DetStaTimeLastSeen 1.3.6.1.4.1.8744.5.4.1.17.1.10
Elapsed time in seconds since the last probe has been received from this client.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

coDot11OperationTable 1.3.6.1.4.1.8744.5.4.2.1
Group contains MAC attributes pertaining to the operation of the MAC. In tabular form to allow multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11OperationEntry

coDot11OperationEntry 1.3.6.1.4.1.8744.5.4.2.1.1
An entry in the coDot11OperationEntry Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11OperationEntry  

coDot11MACAddress 1.3.6.1.4.1.8744.5.4.2.1.1.1
Unique MAC Address assigned to the STA.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

coDot11RTSThreshold 1.3.6.1.4.1.8744.5.4.2.1.1.2
Specifies the number of octets in an MPDU, below which an RTS/CTS handshake is not performed. An RTS/CTS handshake is performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. (For additional details, refer to Table 21 in 9.7.) Setting this attribute to be larger than the maximum MSDU size has the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. The default value of this attribute is 2347.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 128..1540 | 2347  

coDot11ShortRetryLimit 1.3.6.1.4.1.8744.5.4.2.1.1.3
Indicates the maximum number of transmission attempts of a frame, the length of which is less than or equal to coDot11RTSThreshold, that are made before a failure condition is indicated. The default value of this attribute is 7.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

coDot11LongRetryLimit 1.3.6.1.4.1.8744.5.4.2.1.1.4
Indicates the maximum number of transmission attempts of a frame, the length of which is greater than coDot11RTSThreshold, that are made before a failure condition is indicated. The default value of this attribute is 4.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

coDot11FragmentationThreshold 1.3.6.1.4.1.8744.5.4.2.1.1.5
Indicates the current maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU is broken down into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. An MSDU or MMPDU is fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute is the lesser of 2346 or the aMPDUMaxLength of the attached PHY and will never exceed the lesser of 2346 or the aMPDUMaxLength of the attached PHY. The value of this attribute will never be less than 256.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 256..2346  

coDot11MaxTransmitMSDULifetime 1.3.6.1.4.1.8744.5.4.2.1.1.6
Elapsed time in TU after the initial transmission of an MSDU, after which further attempts to transmit the MSDU are terminated. The default value of this attribute is 512.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

coDot11MaxReceiveLifetime 1.3.6.1.4.1.8744.5.4.2.1.1.7
Elapsed time in TU, after the initial reception of a fragmented MMPDU or MSDU, after which further attempts to reassemble the MMPDU or MSDU is terminated. The default value is 512.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

coDot11ManufacturerID 1.3.6.1.4.1.8744.5.4.2.1.1.8
The name of the manufacturer. It may include additional information at the manufacturer's discretion. The default value of this attribute is null.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

coDot11ProductID 1.3.6.1.4.1.8744.5.4.2.1.1.9
An identifier that is unique to the manufacturer. It may include additional information at the manufacturer's discretion. The default value is null.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

coDot11RadioType 1.3.6.1.4.1.8744.5.4.2.1.1.10
Identify the wireless device inside the HP product.
Status: current Access: read-only
OBJECT-TYPE    
  ColubrisRadioType  

coDot11StationDetectionState 1.3.6.1.4.1.8744.5.4.2.1.1.11
The desired state of the station detection process. 'true': Analyze probe requests. 'false': Do not analyze probe requests.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

coDot11CountersTable 1.3.6.1.4.1.8744.5.4.2.2
Group containing attributes that are MAC counters. In tabular form to allow multiple instance on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11CountersEntry

coDot11CountersEntry 1.3.6.1.4.1.8744.5.4.2.2.1
An entry in the coDot11CountersEntry Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11CountersEntry  

coDot11TransmittedFragmentCount 1.3.6.1.4.1.8744.5.4.2.2.1.1
This counter is incremented for an acknowledged MPDU with an individual address in the address 1 field or an MPDU with a multicast address in the address 1 field of type Data or Management.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11MulticastTransmittedFrameCount 1.3.6.1.4.1.8744.5.4.2.2.1.2
This counter is incremented only when the multicast bit is set in the destination MAC address of a successfully transmitted MSDU. When operating as a STA in an ESS, where these frames are directed to the AP, this implies having received an acknowledgment to all associated MPDUs.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11FailedCount 1.3.6.1.4.1.8744.5.4.2.2.1.3
This counter is incremented when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the coDot11ShortRetryLimit or coDot11LongRetryLimit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11RetryCount 1.3.6.1.4.1.8744.5.4.2.2.1.4
This counter is incremented when an MSDU is successfully transmitted after one or more retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11MultipleRetryCount 1.3.6.1.4.1.8744.5.4.2.2.1.5
This counter is incremented when an MSDU is successfully transmitted after more than one retransmission.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11FrameDuplicateCount 1.3.6.1.4.1.8744.5.4.2.2.1.6
This counter is incremented when a frame is received that the Sequence Control field indicates is a duplicate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11RTSSuccessCount 1.3.6.1.4.1.8744.5.4.2.2.1.7
This counter is incremented when a CTS is received in response to an RTS.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11RTSFailureCount 1.3.6.1.4.1.8744.5.4.2.2.1.8
This counter is incremented when a CTS is not received in response to an RTS.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11ACKFailureCount 1.3.6.1.4.1.8744.5.4.2.2.1.9
This counter is incremented when an ACK is not received when expected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11ReceivedFragmentCount 1.3.6.1.4.1.8744.5.4.2.2.1.10
This counter is incremented for each successfully received MPDU of type Data or Management.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11MulticastReceivedFrameCount 1.3.6.1.4.1.8744.5.4.2.2.1.11
This counter is incremented when a MSDU is received with the multicast bit set in the destination MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11FCSErrorCount 1.3.6.1.4.1.8744.5.4.2.2.1.12
This counter is incremented when an FCS error is detected in a received MPDU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11TransmittedFrameCount 1.3.6.1.4.1.8744.5.4.2.2.1.13
This counter is incremented for each successfully transmitted MSDU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11WEPUndecryptableCount 1.3.6.1.4.1.8744.5.4.2.2.1.14
This counter is incremented when a frame is received with the WEP subfield of the Frame Control field set to one, and the WEPOn value for the key mapped to the TA's MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11PhyOperationTable 1.3.6.1.4.1.8744.5.4.3.1
PHY level attributes concerned with operation. In tabular form to allow multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11PhyOperationEntry

coDot11PhyOperationEntry 1.3.6.1.4.1.8744.5.4.3.1.1
An entry in the coDot11PhyOperation Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11PhyOperationEntry  

coDot11PHYType 1.3.6.1.4.1.8744.5.4.3.1.1.1
This is an 8-bit integer value that identifies the PHY type supported by the attached PLCP and PMD. Currently defined values and their corresponding PHY types are: FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03, OFDM 5 GHz = 04.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fhss(1), dsss(2), irbaseband(3), ofdm(4), ht(7)  

coDot11CurrentRegDomain 1.3.6.1.4.1.8744.5.4.3.1.1.2
The current regulatory domain this instance of the PMD is supporting. This object corresponds to one of the RegDomains listed in coDot11RegDomainsSupported.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coDot11TempType 1.3.6.1.4.1.8744.5.4.3.1.1.3
There are different operating temperature requirements dependent on the anticipated environmental conditions. This attribute describes the current PHY's operating temperature range capability. Currently defined values and their corresponding temperature ranges are: Type 1 = X'01'-Commercial range of 0 to 40 degrees C, Type 2 = X'02'-Industrial range of -30 to 70 degrees C.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tempType1(1), tempType2(2)  

coDot11CurrentOperFrequency 1.3.6.1.4.1.8744.5.4.3.1.1.4
The current operating frequency channel of the radio.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

coDot11CurrentOperPHYType 1.3.6.1.4.1.8744.5.4.3.1.1.5
The current operating PHY type of the radio.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ieee802dot11a(1), ieee802dot11b(2), ieee802dot11g(3), ieee802dot11bAndg(4), ieee802dot11aTurbo(5), ieee802dot11n(6)  

coDot11Sensitivity 1.3.6.1.4.1.8744.5.4.3.1.1.6
Receiver sensitivity of the radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER large(1), medium(2), small(3)  

coDot11RadioEnabled 1.3.6.1.4.1.8744.5.4.3.1.1.7
When True the radio is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

coDot11OperatingMode 1.3.6.1.4.1.8744.5.4.3.1.1.8
Operating mode of the radio. Available options are: Access point and Wireless links: Standard operating mode provides support for all wireless functions. Access point only: Only provides access point functionality, local mesh links cannot be created. Wireless links only: Only provides local mesh functionality. Wireless client stations cannot connect. Monitor: Disables access point and local mesh functions. Use this option for continuous scanning across all channels in all supported wireless modes. Sensor: Enables RF sensor functionality on this radio. Operation of this feature requires that the appropriate license is installed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER accessPointAndWirelessLinks(1), accessPointOnly(2), wirelessLinksOnly(3), monitor(4), sensor(5)  

coDot11AutoChannelEnabled 1.3.6.1.4.1.8744.5.4.3.1.1.9
When True the Auto Channel option is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

coDot11AutoChannelInterval 1.3.6.1.4.1.8744.5.4.3.1.1.10
Time interval, in minutes, between auto rescanning of the channels. Maximum is 1440 minutes (24 hours). A value of zero disables automatic rescanning of channels, the radio will automatically select a channel when the interface initializes and utilize that channel as long as the interface is operational.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), timeOfDay(1), oneHour(60), twoHours(120), fourHours(240), eightHours(480), twelveHours(720), tweentyFourHours(1440)  

coDot11AutoPowerEnabled 1.3.6.1.4.1.8744.5.4.3.1.1.11
When True the Auto Power option is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

coDot11AutoPowerInterval 1.3.6.1.4.1.8744.5.4.3.1.1.12
Time interval, in minutes, between auto rescanning of the channels. Maximum is 1440 minutes (24 hours).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER oneHour(60), twoHours(120), fourHours(240), eightHours(480), twelveHours(720), tweentyFourHours(1440)  

coDot11PhyAntennaTable 1.3.6.1.4.1.8744.5.4.3.2
Group of attributes for PhyAntenna. In tabular form to allow multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11PhyAntennaEntry

coDot11PhyAntennaEntry 1.3.6.1.4.1.8744.5.4.3.2.1
An entry in the coDot11PhyAntenna Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11PhyAntennaEntry  

coDot11CurrentTxAntenna 1.3.6.1.4.1.8744.5.4.3.2.1.1
The current antenna being used to transmit. This value is one of the values appearing in coDot11SupportedTxAntenna. This may be used by a management agent to control which antenna is used for transmission.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

coDot11DiversitySupport 1.3.6.1.4.1.8744.5.4.3.2.1.2
This implementation's support for diversity, encoded as: X'01': Diversity is available and is performed over the fixed list of antennas defined in coDot11DiversitySelectionRx. X'02': Diversity is not supported. X'03': Diversity is supported and control of diversity is also available, in which case the attribute coDot11DiversitySelectionRx can be dynamically modified by the LME.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fixedlist(1), notsupported(2), dynamic(3)  

coDot11CurrentRxAntenna 1.3.6.1.4.1.8744.5.4.3.2.1.3
The current antenna being used to receive, if the coDot11 DiversitySupport indicates that diversity is not supported. The selected antenna shall be one of the antennae marked for receive in the coDot11AntennasListTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

coDot11PhyConfigTable 1.3.6.1.4.1.8744.5.4.3.3
PHY configuration attributes. In tabular form to allow multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11PhyConfigEntry

coDot11PhyConfigEntry 1.3.6.1.4.1.8744.5.4.3.3.1
An entry in the coDot11PhyConfig Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11PhyConfigEntry  

coDot11PhyAdminStatus 1.3.6.1.4.1.8744.5.4.3.3.1.1
The desired state of the radio interface. 'up': Sets the radio interface to be ready to transmit and receive. 'down': Stops the transmission and reception of packets on the interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

coDot11PhyOperStatus 1.3.6.1.4.1.8744.5.4.3.3.1.2
The current state of the radio interface. 'up': The radio interface is ready to ready to transmit and receive. 'down': The radio is not able to transmit or receive on the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

coDot11PhyDSSSTable 1.3.6.1.4.1.8744.5.4.3.4
Entry of attributes for coDot11PhyDSSSEntry. In tabular form to allow multiple instances on an agent. This table only apply when in DSSS 2.4 GHz range
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11PhyDSSSEntry

coDot11PhyDSSSEntry 1.3.6.1.4.1.8744.5.4.3.4.1
An entry in the coDot11PhyDSSSEntry Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11PhyDSSSEntry  

coDot11CurrentChannel 1.3.6.1.4.1.8744.5.4.3.4.1.1
The desired operating frequency channel of the DSSS PHY. Valid channel numbers are as defined in 15.4.6.2.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..14  

coDot11CCAModeSupported 1.3.6.1.4.1.8744.5.4.3.4.1.2
coDot11CCAModeSupported is a bit-significant value, representing all of the CCA modes supported by the PHY. Valid values are: energy detect only (ED_ONLY) = 01 carrier sense only (CS_ONLY) = 02 carrier sense and energy detect (ED_and_CS)= 04 Or the logical sum of any of these values.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..7  

coDot11CurrentCCAMode 1.3.6.1.4.1.8744.5.4.3.4.1.3
The current CCA method in operation. Valid values are: energy detect only (edonly) = 01 carrier sense only (csonly) = 02 carrier sense and energy detect (edandcs)= 04
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER edonly(1), csonly(2), edandcs(4)  

coDot11RegDomainsSupportedTable 1.3.6.1.4.1.8744.5.4.3.5
There are different operational requirements dependent on the regulatory domain. This attribute list describes the regulatory domains the PLCP and PMD support in this implementation. Currently defined values and their corresponding Regulatory Domains are: FCC (USA) = X'10' DOC (Canada) = X'20' ETSI (most of Europe) = X'30' Spain = X'31' France = X'32' Japan = X'41'
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11RegDomainsSupportedEntry

coDot11RegDomainsSupportedEntry 1.3.6.1.4.1.8744.5.4.3.5.1
An entry in the coDot11RegDomainsSupported Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11RegDomainsSupportIndex - Uniquely specifies the regulatory domain in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11RegDomainsSupportedEntry  

coDot11RegDomainsSupportIndex 1.3.6.1.4.1.8744.5.4.3.5.1.1
The auxiliary variable used to identify instances of the columnar objects in the RegDomainsSupported Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

coDot11RegDomainsSupportValue 1.3.6.1.4.1.8744.5.4.3.5.1.2
There are different operational requirements dependent on the regulatory domain. This attribute list describes the regulatory domains the PLCP and PMD support in this implementation. Currently defined values and their corresponding Regulatory Domains are: FCC (USA) = X'10' DOC (Canada) = X'20' ETSI (most of Europe) = X'30' Spain = X'31' France = X'32' Japan = X'41'
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fcc(16), doc(32), etsi(48), spain(49), france(50), japan(65)  

coDot11AntennasListTable 1.3.6.1.4.1.8744.5.4.3.6
This table represents the list of antennae. An antenna can be marked to be capable of transmitting, receiving, and/or for participation in receive diversity. Each entry in this table represents a single antenna with its properties. The maximum number of antennae that can be contained in this table is 255.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11AntennasListEntry

coDot11AntennasListEntry 1.3.6.1.4.1.8744.5.4.3.6.1
An entry in the coDot11AntennasListTable, representing the properties of a single antenna. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11AntennaListIndex - Uniquely identifies the antenna connected to the 802.11 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11AntennasListEntry  

coDot11AntennaListIndex 1.3.6.1.4.1.8744.5.4.3.6.1.1
The unique index of an antenna which is used to identify the columnar objects in the coDot11AntennasList Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..255  

coDot11SupportedTxAntenna 1.3.6.1.4.1.8744.5.4.3.6.1.2
When true, this object indicates that the antenna represented by coDot11AntennaIndex can be used as a transmit antenna.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11SupportedRxAntenna 1.3.6.1.4.1.8744.5.4.3.6.1.3
When true, this object indicates that the antenna represented by the coDot11AntennaIndex can be used as a receive antenna.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11DiversitySelectionRx 1.3.6.1.4.1.8744.5.4.3.6.1.4
When true, this object indicates that the antenna represented by coDot11AntennaIndex can be used for receive diversity. This object may only be true if the antenna can be used as a receive antenna, as indicated by coDot11SupportedRxAntenna.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11SupportedDataRatesTxTable 1.3.6.1.4.1.8744.5.4.3.7
The Transmit bit rates supported by the PLCP and PMD, data rates are increments of 500Kb/s from 1 Mbps to 63.5 Mbps subject to limitations of each individual PHY.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11SupportedDataRatesTxEntry

coDot11SupportedDataRatesTxEntry 1.3.6.1.4.1.8744.5.4.3.7.1
An Entry (conceptual row) in the coDot11SupportedDataRatesTx Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11SupportedDataRatesTxIndex - Uniquely identifies a supported rate in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11SupportedDataRatesTxEntry  

coDot11SupportedDataRatesTxIndex 1.3.6.1.4.1.8744.5.4.3.7.1.1
Index object which identifies which data rate to access.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..12  

coDot11SupportedDataRatesTxValue 1.3.6.1.4.1.8744.5.4.3.7.1.2
The transmit bit rates supported by the PLCP and PMD. Data rates are increments of 500Kb/s from 1 Mbps to 63.5 Mbps subject to limitations of each individual PHY.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 2..127  

coDot11SupportedDataRatesRxTable 1.3.6.1.4.1.8744.5.4.3.8
The receive bit rates supported by the PLCP and PMD. Data rates are increments of 500Kb/s from 1 Mbps to 63.5 Mbps subject to limitations of each individual PHY.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11SupportedDataRatesRxEntry

coDot11SupportedDataRatesRxEntry 1.3.6.1.4.1.8744.5.4.3.8.1
An Entry (conceptual row) in the coDot11SupportedDataRatesRx Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. coDot11SupportedDataRatesTxIndex - Uniquely identifies a supported rate in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11SupportedDataRatesRxEntry  

coDot11SupportedDataRatesRxIndex 1.3.6.1.4.1.8744.5.4.3.8.1.1
Index object which identifies which data rate to access.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..12  

coDot11SupportedDataRatesRxValue 1.3.6.1.4.1.8744.5.4.3.8.1.2
The receive bit rates supported by the PLCP and PMD. Data rates are increments of 500Kb/s from 1 Mbps to 63.5 Mbps subject to limitations of each individual PHY.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 2..127  

coDot11PhyOFDMTable 1.3.6.1.4.1.8744.5.4.3.9
Entry of attributes for coDot11PhyOFDMEntry. In tabular form to allow multiple instances on an agent. This table only apply when in OFDM 5 GHz range.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11PhyOFDMEntry

coDot11PhyOFDMEntry 1.3.6.1.4.1.8744.5.4.3.9.1
An entry in the coDot11PhyOFDMEntry Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11PhyOFDMEntry  

coDot11CurrentFrequency 1.3.6.1.4.1.8744.5.4.3.9.1.1
The desired operating frequency channel of the OFDM PHY.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..200  

coDot11TIThreshold 1.3.6.1.4.1.8744.5.4.3.9.1.2
The threshold being used to detect a busy medium (frequency). CCA reports a busy medium upon detecting the RSSI above this threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

coDot11FrequencyBandsSupported 1.3.6.1.4.1.8744.5.4.3.9.1.3
The capability of the OFDM PHY implementation to operate in the three U-NII bands. Coded as an integer value of a three 1 bit fields as follow: bit 0 - Capable of operating in the lower (5.15-5.25 GHz) U-NII band. bit 1 - Capable of operating in the middle (5.25-5.35 GHz) U-NII band. bit 2 - Capable of operating in the middle (5.725-5.825 GHz) U-NII band. For example, for an implementation capable of operating in the lower and middle bands, this object would take the value 3.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..7  

coDot11MinimumSNRLevel 1.3.6.1.4.1.8744.5.4.3.10
An SNR level notification is generated when the average SNR level is below this attribute. Not supported on the M111.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..92  

coDot11SNRLevelNotificationEnabled 1.3.6.1.4.1.8744.5.4.3.11
This attribute, when true, enables the generation of SNR level notifications. Not supported on the M111.
Status: current Access: read-write
OBJECT-TYPE    
  ColubrisNotificationEnable  

coDot11SNRLevelNotificationInterval 1.3.6.1.4.1.8744.5.4.3.12
Interval in minutes between SNR Level notifications. Not supported on the M111.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1000000  

coDot11CountryCode 1.3.6.1.4.1.8744.5.4.3.13
The radios are running accordingly to the regulations of this country.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER world(1), albania(8), algeria(12), azerbaijan(31), argentina(32), australia(36), austria(40), bahrain(48), armenia(51), belgium(56), bolivia(68), brazil(76), belize(84), bruneiDarussalam(96), bulgaria(100), belarus(112), canada(124), chile(152), china(156), taiwan(158), colombia(170), costaRica(188), croatia(191), cyprus(196), czechRepublic(203), denmark(208), dominicanRepublic(214), ecuador(218), elSalvador(222), estonia(233), finland(246), france(250), georgia(268), germany(276), greece(300), guatemala(320), honduras(340), hongkong(344), hungary(348), iceland(352), india(356), indonesia(360), iran(364), ireland(372), israel(376), italy(380), japanW52W53(392), japanW52W53J52(393), japanJ52(395), japanJ5280211j(396), japanClient(397), kazakhstan(398), jordan(400), kenya(404), northKorea(408), southKorea(410), kuwait(414), lebanon(422), latvia(428), liechtenstein(438), lithuania(440), luxembourg(442), macau(446), malaysia(458), mexico(484), monaco(492), morocco(504), oman(512), netherlands(528), newZealand(554), norway(578), pakistan(586), panama(591), peru(604), philippines(608), poland(616), portugal(620), puertoRico(630), qatar(634), romania(642), russianFederation(643), saudiArabia(682), singapore(702), slovakia(703), vietNam(704), slovenia(705), southAfrica(710), zimbabwe(716), spain(724), sweden(752), switzerland(756), syria(760), thailand(764), trinidadAndTobago(780), unitedArabEmirates(784), tunisia(788), turkey(792), ukraine(804), macedonia(807), egypt(818), unitedKingdom(826), unitedKingdom58GHz(827), unitedStates(840), uruguay(858), uzbekistan(860), venezuela(862), yemen(887)  

coDot11PhyHTTable 1.3.6.1.4.1.8744.5.4.3.14
Entry of attributes for coDot11PhyHTEntry. This table only apply when the PHY type is HT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11PhyHTEntry

coDot11PhyHTEntry 1.3.6.1.4.1.8744.5.4.3.14.1
An entry in the coDot11PhyHTEntry Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11PhyHTEntry  

coDot11FortyMHzOperationImplemented 1.3.6.1.4.1.8744.5.4.3.14.1.1
This attribute, when TRUE, indicates that 40 MHz Operation is implemented.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11FortyMHzOperationEnabled 1.3.6.1.4.1.8744.5.4.3.14.1.2
This attribute, when TRUE, indicates that 40 MHz Operation is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11CurrentPrimaryChannel 1.3.6.1.4.1.8744.5.4.3.14.1.3
This attribute indicates the operating channel. If 20/40 MHz Mode is currently in use then this attribute indicates the primary channel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coDot11CurrentSecondaryChannel 1.3.6.1.4.1.8744.5.4.3.14.1.4
This attribute indicates the channel number of the secondary channel. If 20/40 MHz mode is not currently in use, this attribute value is 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coDot11GreenfieldOptionImplemented 1.3.6.1.4.1.8744.5.4.3.14.1.5
This attribute, when TRUE, indicates that the HT Greenfield option is implemented.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11GreenfieldOptionEnabled 1.3.6.1.4.1.8744.5.4.3.14.1.6
This attribute, when TRUE, indicates that the HT Greenfield option is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11ShortGIOptionInTwentyImplemented 1.3.6.1.4.1.8744.5.4.3.14.1.7
This attribute, when TRUE, indicates that the Short Guard option is implemented for 20 MHz operation.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11ShortGIOptionInTwentyEnabled 1.3.6.1.4.1.8744.5.4.3.14.1.8
This attribute, when TRUE, indicates that the Short Guard option is enabled for 20 MHz operation.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11ShortGIOptionInFortyImplemented 1.3.6.1.4.1.8744.5.4.3.14.1.9
This attribute, when TRUE, indicates that the Short Guard option is implemented for 40 MHz operation.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11ShortGIOptionInFortyEnabled 1.3.6.1.4.1.8744.5.4.3.14.1.10
This attribute, when TRUE, indicates that the Short Guard option is enabled for 40 MHz operation.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coDot11HighestSupportedDataRate 1.3.6.1.4.1.8744.5.4.3.14.1.11
This attribute shall specify the Highest Data Rate in Mbps at which the station may receive data.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..600  

coDot11RSNAStatsTable 1.3.6.1.4.1.8744.5.4.4
This table maintains statistics for SN. It is not supported on the WCB-200.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoDot11RSNAStatsEntry

coDot11RSNAStatsEntry 1.3.6.1.4.1.8744.5.4.4.1
An entry in the coDot11RSNAStatsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoDot11RSNAStatsEntry  

coDot11RSNAStatsVersion 1.3.6.1.4.1.8744.5.4.4.1.2
The RSNA version which the AP associated with.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

coDot11RSNAStatsSelectedPairwiseCipher 1.3.6.1.4.1.8744.5.4.4.1.3
The AKM Suite the AP selected during association. The value consists of a three octet OUI followed by a one octet type as follows: OUI Value, Cipher, Type XX-XX-XX, 0, Reserved XX-XX-XX, 1, WEP-40 XX-XX-XX, 2, TKIP XX-XX-XX, 3, Reserved XX-XX-XX, 4, CCMP XX-XX-XX, 5, WEP-104 XX-XX-XX, 6-255, Reserved Vendor, any, Vendor Specific other, any, Reserved
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

coDot11RSNAStatsTKIPICVErrors 1.3.6.1.4.1.8744.5.4.4.1.4
Counts the number of TKIP ICV errors encountered when decrypting packets for the AP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11RSNAStatsTKIPLocalMICFailures 1.3.6.1.4.1.8744.5.4.4.1.5
Counts the number of Michael MIC failures encountered when checking the integrity of packets received from the AP at this entity.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11RSNAStatsTKIPRemoteMICFailures 1.3.6.1.4.1.8744.5.4.4.1.6
Counts the number of Michael MIC failures encountered by the remote device and reported back to this entity.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11RSNAStatsTKIPCounterMeasuresInvoked 1.3.6.1.4.1.8744.5.4.4.1.7
Counts the number of times a MIC failure occurred two times within 60 seconds and countermeasures were invoked. This variable counts this for both local and remote. It increments every time countermeasures are invoked.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11RSNAStatsCCMPFormatErrors 1.3.6.1.4.1.8744.5.4.4.1.8
The number of MSDUs received with an invalid CCMP format.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11RSNAStatsCCMPReplays 1.3.6.1.4.1.8744.5.4.4.1.9
The number of received unicast fragments discarded by the replay mechanism.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11RSNAStatsCCMPDecryptErrors 1.3.6.1.4.1.8744.5.4.4.1.10
The number of received fragments discarded by the CCMP decryption algorithm.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11RSNAStatsTKIPReplays 1.3.6.1.4.1.8744.5.4.4.1.11
Counts the number of TKIP replay errors detected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11RSNAStats4WayHandshakeFailures 1.3.6.1.4.1.8744.5.4.4.1.12
Counts the number of 4-Way Handshake failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

coDot11ManagementMIBNotificationPrefix 1.3.6.1.4.1.8744.5.4.5
OBJECT IDENTIFIER    

coDot11ManagementMIBNotifications 1.3.6.1.4.1.8744.5.4.5.0
OBJECT IDENTIFIER    

coDot11SNRLevelNotification 1.3.6.1.4.1.8744.5.4.5.0.1
The average SNR level for all the stations using this VSC during the last three intervals is low.
Status: current Access: read-only
NOTIFICATION-TYPE    

coDot11AssociationNotification 1.3.6.1.4.1.8744.5.4.5.0.2
Sent when a new association is made or sent periodically using interval specified by coDot11AssociationNotificationInterval object.
Status: current Access: read-only
NOTIFICATION-TYPE    

coDot11UnauthorizedAPNotification 1.3.6.1.4.1.8744.5.4.5.0.3
Sent when a new unauthorized AP is detected.
Status: current Access: read-only
NOTIFICATION-TYPE    

coDot11Conformance 1.3.6.1.4.1.8744.5.4.6
OBJECT IDENTIFIER    

coDot11Groups 1.3.6.1.4.1.8744.5.4.6.1
OBJECT IDENTIFIER    

coDot11Compliances 1.3.6.1.4.1.8744.5.4.6.2
OBJECT IDENTIFIER    

coDot11Compliance 1.3.6.1.4.1.8744.5.4.6.2.1
The compliance statement for SNMPv2 entities that implement the IEEE 802.11 MIB.
Status: deprecated Access: read-only
MODULE-COMPLIANCE    

coDot11RSNCompliance 1.3.6.1.4.1.8744.5.4.6.2.2
The compliance statement for SNMPv2 entities that implement the IEEE 802.11 RSN MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

coDot11ComplianceExt 1.3.6.1.4.1.8744.5.4.6.2.3
The compliance statement for SNMPv2 entities that implement the IEEE 802.11 MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

coDot11APBaseGroup 1.3.6.1.4.1.8744.5.4.6.1.1
The AP object class provides the necessary support at the Access Point to manage the processes in the STA such that the STA may work cooperatively as a part of an IEEE 802.11 network. coDot11AdminMinimumDataRate and coDot11AdminMaximumDataRate are deprecated.
Status: deprecated Access: read-only
OBJECT-GROUP    

coDot11APPrivacyGroup 1.3.6.1.4.1.8744.5.4.6.1.2
The APPrivacy package is a set of attributes that are present if WEP is implemented on the Access Point.
Status: current Access: read-only
OBJECT-GROUP    

coDot11MACBaseGroup 1.3.6.1.4.1.8744.5.4.6.1.3
The MAC object class provides the necessary support for access control, generation, and verification of frame check sequences, and proper delivery of valid data to upper layers.
Status: current Access: read-only
OBJECT-GROUP    

coDot11MACStatisticsGroup 1.3.6.1.4.1.8744.5.4.6.1.4
The MACStatistics package provides extended statistical information on the operation of the MAC. This package is completely optional.
Status: current Access: read-only
OBJECT-GROUP    

coDot11SmtAuthenticationAlgorithmsGroup 1.3.6.1.4.1.8744.5.4.6.1.5
Authentication Algorithm Table.
Status: current Access: read-only
OBJECT-GROUP    

coDot11PhyConfigComplianceGroup 1.3.6.1.4.1.8744.5.4.6.1.6
PHY layer operations attributes.
Status: current Access: read-only
OBJECT-GROUP    

coDot11PhyConfigGroup 1.3.6.1.4.1.8744.5.4.6.1.7
PHY notification configuration attributes.
Status: current Access: read-only
OBJECT-GROUP    

coDot11PhyAntennaComplianceGroup 1.3.6.1.4.1.8744.5.4.6.1.8
Phy antenna attributes.
Status: current Access: read-only
OBJECT-GROUP    

coDot11PhyDSSSComplianceGroup 1.3.6.1.4.1.8744.5.4.6.1.9
Attributes that configure the DSSS for IEEE 802.11.
Status: current Access: read-only
OBJECT-GROUP    

coDot11PhyRegDomainsSupportGroup 1.3.6.1.4.1.8744.5.4.6.1.10
Attributes that specify the supported Regulation Domains.
Status: current Access: read-only
OBJECT-GROUP    

coDot11PhyAntennasListGroup 1.3.6.1.4.1.8744.5.4.6.1.11
Antennas list attributes.
Status: current Access: read-only
OBJECT-GROUP    

coDot11PhyRateGroup 1.3.6.1.4.1.8744.5.4.6.1.12
Attributes for Data Rates for IEEE 802.11.
Status: current Access: read-only
OBJECT-GROUP    

coDot11CountersGroup 1.3.6.1.4.1.8744.5.4.6.1.13
Attributes from the coDot11CountersGroup that are not described in the coDot11MACStatistics group. These objects are mandatory.
Status: current Access: read-only
OBJECT-GROUP    

coDot11AssociationGroup 1.3.6.1.4.1.8744.5.4.6.1.14
The AP object class provides the necessary support at the Access Point to manage the association table.
Status: current Access: read-only
OBJECT-GROUP    

coDot11AssociationConfigGroup 1.3.6.1.4.1.8744.5.4.6.1.15
The AP object class provides the necessary support at the Access Point to manage the association table. Not supported on the M111.
Status: current Access: read-only
OBJECT-GROUP    

coDot11ScanGroup 1.3.6.1.4.1.8744.5.4.6.1.16
The AP object class provides the necessary support at the Access Point to manage the scan table.
Status: current Access: read-only
OBJECT-GROUP    

coDot11ScanConfigGroup 1.3.6.1.4.1.8744.5.4.6.1.17
The AP object class provides the necessary support at the Access Point to manage the scan table. Not supported on the M111.
Status: current Access: read-only
OBJECT-GROUP    

coDot11WDSComplianceGroup 1.3.6.1.4.1.8744.5.4.6.1.18
Attributes that configure the WDS table.
Status: current Access: read-only
OBJECT-GROUP    

coDot11NotificationGroup 1.3.6.1.4.1.8744.5.4.6.1.19
A collection of supported notifications.
Status: current Access: read-only
NOTIFICATION-GROUP    

coDot11RSNBase 1.3.6.1.4.1.8744.5.4.6.1.20
The coDot11RSNBase object class provides the necessary support for managing RSNA functionality in the STA
Status: current Access: read-only
OBJECT-GROUP    

coDot11PhyOFDMComplianceGroup 1.3.6.1.4.1.8744.5.4.6.1.21
Attributes that configure the OFDM for IEEE 802.11.
Status: current Access: read-only
OBJECT-GROUP    

coDot11StationHTGroup 1.3.6.1.4.1.8744.5.4.6.1.22
The AP object class provides the necessary support at the Access Point to manage the station HT table.
Status: current Access: read-only
OBJECT-GROUP    

coDot11PhyHTComplianceGroup 1.3.6.1.4.1.8744.5.4.6.1.23
Attributes that configure the HT for IEEE 802.11.
Status: current Access: read-only
OBJECT-GROUP    

coDot11APBaseGroupExt 1.3.6.1.4.1.8744.5.4.6.1.24
The AP object class provides the necessary support at the Access Point to manage the processes in the STA such that the STA may work cooperatively as a part of an IEEE 802.11 network.
Status: current Access: read-only
OBJECT-GROUP    

coDot11StationDetectionGroup 1.3.6.1.4.1.8744.5.4.6.1.25
The AP object class provides the necessary support at the Access Point to manage the station detection information.
Status: current Access: read-only
OBJECT-GROUP