CNTAU-MIB

File: CNTAU-MIB.mib (142531 bytes)

Imported modules

SNMPv2-TC RFC1065-SMI RFC-1212
RFC1213-MIB RFC-1215

Imported symbols

PhysAddress Gauge IpAddress
enterprises Counter OBJECT-TYPE
DisplayString TRAP-TYPE

Defined Types

CntMsgEntry  
SEQUENCE    
  cntMsgIndex INTEGER
  cntMsgSeverity INTEGER
  cntMsgTaskName DisplayString
  cntMsgNumber INTEGER
  cntMsgCpuNumber INTEGER
  cntMsgNodeNumber DisplayString
  cntMsgDateTime DisplayString
  cntMsgContent DisplayString
  cntMsgSeqNumber INTEGER

CntHwCpuEntry  
SEQUENCE    
  cntCpuNum INTEGER
  cntCpuType INTEGER
  cntCpuSemCount INTEGER
  cntCpuSemLost INTEGER
  cntCpuStatus INTEGER
  cntCpuMonStatus INTEGER
  cntCpuPollStatus INTEGER
  cntCpuPolls Counter
  cntCpuResetDelayTime INTEGER
  cntCpuMonBy INTEGER
  cntCpuPort INTEGER
  cntCpuUnclaims Counter
  cntCpuXtraInts Counter
  cntCpuLevel7s Counter
  cntCpuMsgRets Counter
  cntCpuMsgHolds Counter
  cntCpuResetFlag INTEGER
  cntCpuUtil INTEGER
  cntCpuLastFailDate DisplayString
  cntCpuLastChgDate DisplayString

CntFeatureEntry  
SEQUENCE    
  cntFeatureIndex INTEGER
  cntFeatureName DisplayString
  cntFeatureQuantity INTEGER
  cntFeatureDescr DisplayString

CntSlotEntry  
SEQUENCE    
  cntSlotIndex INTEGER
  cntSlotName DisplayString
  cntSlotPartNumber INTEGER
  cntSlotSerialNumber INTEGER
  cntSlotRevLevel DisplayString
  cntSlotInterface INTEGER
  cntSlotCpuNumber INTEGER
  cntSlotVMEbusGrant INTEGER

CntIOEntry  
SEQUENCE    
  cntIOIndex INTEGER
  cntIOName DisplayString
  cntIOPartNumber INTEGER
  cntIOSerialNumber INTEGER
  cntIORevLevel DisplayString
  cntIOInterface INTEGER
  cntIOCpuNumber INTEGER

CntPowerEntry  
SEQUENCE    
  cntPowerIndex INTEGER
  cntPowerName DisplayString
  cntPowerPartNumber INTEGER
  cntPowerSerialNumber INTEGER
  cntPowerRevLevel DisplayString

CntSCREntry  
SEQUENCE    
  cntSCRIndex INTEGER
  cntSCRNumber INTEGER

CntSysCpuEntry  
SEQUENCE    
  cntCpuIndex INTEGER
  cntCpuMemSpace INTEGER
  cntCpuMemFree INTEGER

CntCpuTaskEntry  
SEQUENCE    
  cntCpuTaskIndex INTEGER
  cntCpuTaskName DisplayString

CntifEntry  
SEQUENCE    
  cntifIndex INTEGER
  cntifType INTEGER
  cntifCpu INTEGER
  cntifSubIndex INTEGER

CntDot3Entry  
SEQUENCE    
  cntdot3Index INTEGER
  cntdot3SoftwareID IpAddress
  cntdot3BufsAllocated INTEGER
  cntdot3BufTooManys Counter
  cntdot3BufNotAvails Counter
  cntdot3BufPriority INTEGER
  cntdot3PICBusErrs Counter
  cntdot3PICDMAErrs Counter
  cntdot3PICMemSeqErrs Counter
  cntdot3PICMemParityErrs Counter
  cntdot3PICSpuriousInts Counter
  cntdot3LanceInts Counter
  cntdot3LanceParityErrs Counter
  cntdot3LanceMemErrs Counter
  cntdot3LanceMissedPkts Counter
  cntdot3LanceUnderFlows Counter
  cntdot3LanceOverFlows Counter
  cntdot3LanceTxWaitQ INTEGER
  cntdot3DMAChan1RxErr INTEGER
  cntdot3DMAChan3RxErr INTEGER
  cntdot3DMAChan0TxErr INTEGER
  cntdot3DMAChan2TxErr INTEGER
  cntdot3DMAChan1RxErrs Counter
  cntdot3DMAChan3RxErrs Counter
  cntdot3DMAChan0TxErrs Counter
  cntdot3DMAChan2TxErrs Counter
  cntdot3DMARxWaitQ INTEGER
  cntdot3DMATxWaitQ INTEGER
  cntdot3LPXParityErrs Counter
  cntdot3Chan1Misreads Counter

CntFddiSMTEntry  
SEQUENCE    
  cntFddiSMTIndex INTEGER
  cntFddiSMTManufacturerData OCTET STRING
  cntFddiSMTUserData OCTET STRING
  cntFddiSMTReportLimit INTEGER
  cntFddiSMTMsgTimeStamp OCTET STRING
  cntFddiSMTTransitionTimeStamp OCTET STRING
  cntFddiSMTSetCount OCTET STRING
  cntFddiSMTLastSetStationID OCTET STRING

CntFddiMACEntry  
SEQUENCE    
  cntFddiMACSMTIndex INTEGER
  cntFddiMACIndex INTEGER
  cntFddiMACBridgeFunction INTEGER
  cntFddiMACDownstreamNbr OCTET STRING
  cntFddiMACOldDownstreamNbr OCTET STRING
  cntFddiMACRootConcentratorMac INTEGER
  cntFddiMACLongAlias INTEGER
  cntFddiMACShortAlias INTEGER
  cntFddiMACLongGrpAddr INTEGER
  cntFddiMACShortGrpAddr INTEGER
  cntFddiMACTPri0 INTEGER
  cntFddiMACTPri1 INTEGER
  cntFddiMACTPri2 INTEGER
  cntFddiMACTPri3 INTEGER
  cntFddiMACTPri4 INTEGER
  cntFddiMACTPri5 INTEGER
  cntFddiMACTPri6 INTEGER
  cntFddiMACCopies Counter
  cntFddiMACTransmits Counter
  cntFddiMACTokens Counter
  cntFddiMACTvxExpires Counter
  cntFddiMACNotCopies Counter
  cntFddiMACLates Counter
  cntFddiMACRingOps Counter
  cntFddiMACBaseFrames Counter
  cntFddiMACBaseErrs Counter
  cntFddiMACBaseLosts Counter
  cntFddiMACBaseTimeFrameError OCTET STRING
  cntFddiMACBaseNotCopies Counter
  cntFddiMACBaseTimeNotCopied OCTET STRING
  cntFddiMACNotCopiedThreshold INTEGER
  cntFddiMACBaseCopies Counter
  cntFddiMACNotCopiedRatio INTEGER
  cntFddiMACNotCopiedCondition INTEGER
  cntFddiMACLLCServiceAvailable INTEGER
  cntFddiMACMasterSlaveLoopStatus INTEGER
  cntFddiMACRootMACDownStreamPORTType INTEGER
  cntFddiMACRootMACCurrentPath INTEGER

CntFddiPATHEntry  
SEQUENCE    
  cntFddiPATHSMTIndex INTEGER
  cntFddiPATHIndex INTEGER
  cntFddiPATHTraceMaxExpiration INTEGER
  cntFddiPATHTVXLowerBound INTEGER
  cntFddiPATHTMaxLowerBound INTEGER
  cntFddiPATHType INTEGER
  cntFddiPATHPORTOrder INTEGER
  cntFddiPATHRingLatency INTEGER
  cntFddiPATHTraceStatus INTEGER
  cntFddiPATHSba INTEGER
  cntFddiPATHSbaOverhead INTEGER
  cntFddiPATHStatus INTEGER
  cntFddiPATHTRmode INTEGER

CntFddiPORTEntry  
SEQUENCE    
  cntFddiPORTSMTIndex INTEGER
  cntFddiPORTIndex INTEGER
  cntFddiPORTFotxClass INTEGER
  cntFddiPORTMaintLineState INTEGER
  cntFddiPORTEBErrs Counter
  cntFddiPORTBaseLerEstimate INTEGER
  cntFddiPORTBaseLemRejects Counter
  cntFddiPORTBaseLems Counter
  cntFddiPORTBaseLerTimeStamp OCTET STRING

CntTrapEntry  
SEQUENCE    
  cnttrapIndex INTEGER
  cnttrapAddress IpAddress
  cntsnmpTrapFlags INTEGER
  cntTrapFlags INTEGER
  cnttrapIf IpAddress

CntProxyEntry  
SEQUENCE    
  cntproxyIndex INTEGER
  cntproxyAddress IpAddress
  cntproxyNode IpAddress

CntTraceEntry  
SEQUENCE    
  cnttraceIndex INTEGER
  cnttraceType INTEGER
  cnttraceCpu INTEGER
  cnttraceData OCTET STRING

CntMDMEntry  
SEQUENCE    
  cntmdmQIndex INTEGER
  cntmdmQName DisplayString
  cntmdmQProcessId INTEGER
  cntmdmQTaskId INTEGER

CntDLEntry  
SEQUENCE    
  cntdlIndex INTEGER
  cntdlDescr DisplayString
  cntdlType INTEGER
  cntdlTypeofService INTEGER
  cntdlMtu INTEGER
  cntdlPortAddrLen INTEGER
  cntdlMaxPort INTEGER
  cntdlActivePort INTEGER
  cntdlInOctets Counter
  cntdlInUcastPkts Counter
  cntdlInNUcastPkts Counter
  cntdlInDiscards Counter
  cntdlInErrors Counter
  cntdlInUnknownProtos Counter
  cntdlOutOctets Counter
  cntdlOutUcastPkts Counter
  cntdlOutNUcastPkts Counter
  cntdlOutDiscards Counter
  cntdlOutErrors Counter
  cntdlOutQLen Gauge

CntDLPortEntry  
SEQUENCE    
  cntdlPortIndex INTEGER
  cntdlState INTEGER
  cntdlSourcePort INTEGER
  cntdlDestPort INTEGER
  cntdlPortType INTEGER

CntLLC1ConfigEntry  
SEQUENCE    
  cntllc1ConfigIndex INTEGER
  cntllc1DriverType INTEGER
  cntllc1Addr OCTET STRING
  cntllc1InitFlag INTEGER
  cntllc1TraceFlag INTEGER
  cntllc1BufCnt INTEGER
  cntllc1BusId INTEGER
  cntllc1CpuNum INTEGER
  cntllc1BufPriority INTEGER
  cntllc1WaitTimeOut INTEGER

CntLLC1StatsEntry  
SEQUENCE    
  cntllc1StatIndex INTEGER
  cntllc1InXids Counter
  cntllc1InTests Counter
  cntllc1InUIs Counter
  cntllc1InNoDsaps Counter
  cntllc1InXidOks Counter
  cntllc1InTestOks Counter
  cntllc1InSnapIps Counter
  cntllc1InSnapArps Counter
  cntllc1InSnapNoProts Counter
  cntllc1InSnapNoTypes Counter
  cntllc1OutSnapIps Counter
  cntllc1OutSnapArps Counter
  cntllc1OutXids Counter
  cntllc1OutXidResps Counter
  cntllc1OutTests Counter
  cntllc1OutTestResps Counter
  cntllc1OutRetOks Counter
  cntllc1OutFragPkts Counter

CntLLC1ErrorEntry  
SEQUENCE    
  cntllc1ErrorIndex INTEGER
  cntllc1ArpMailErrs Counter
  cntllc1IpMailErrs Counter
  cntllc1OutXmitErrs Counter
  cntllc1OutMcastErrs Counter
  cntllc1XidErrs Counter
  cntllc1TestErrs Counter
  cntllc1InBadTypes Counter
  cntllc1OutMismIpSizes Counter
  cntllc1OutBadIpSizes Counter
  cntllc1InMismIpSizes Counter
  cntllc1InBadIpSizes Counter
  cntllc1InLateXids Counter
  cntllc1InLateTests Counter
  cntllc1OutTooBigs Counter
  cntllc1OutNoRooms Counter
  cntllc1OutRetBads Counter

CntLuaEntry  
SEQUENCE    
  cntluaIf INTEGER
  cntluaNumber INTEGER
  cntSubChanCount INTEGER

CntSubchanEntry  
SEQUENCE    
  cntsctIndex INTEGER
  cntsctNumber INTEGER
  cntsctTxStatus INTEGER
  cntsctRxStatus INTEGER
  cntsctSubChanStatus INTEGER
  cntsctState INTEGER
  cntsctRxCredit INTEGER
  cntsctRxMsgs Counter
  cntsctRxMsgBytes Counter
  cntsctRxDataBytes Counter
  cntsctTxMsgs Counter
  cntsctTxMsgBytes Counter
  cntsctTxDataBytes Counter
  cntsctTxErrMsgs Counter
  cntsctTotalBytes Counter
  cntsctDrecPid DisplayString
  cntsctDrecTask DisplayString

Defined Values

cnt 1.3.6.1.4.1.333
OBJECT IDENTIFIER    

cntau 1.3.6.1.4.1.333.1
OBJECT IDENTIFIER    

cntsystem 1.3.6.1.4.1.333.1.1
OBJECT IDENTIFIER    

cntSysNodeAddress 1.3.6.1.4.1.333.1.1.1
Node address of this CNT platform. This value contains the region (1 byte), the bus (1 byte), and the node (2 bytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cntSysTimeofDay 1.3.6.1.4.1.333.1.1.2
The date and time from Battery-Backed-up RAM (BBRAM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntSysMsgTable 1.3.6.1.4.1.333.1.1.3
List of entries in the global mail box. This mail box contains any message that have been entered by any software residing in the node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntMsgEntry

cntMsgEntry 1.3.6.1.4.1.333.1.1.3.1
A mail box entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntMsgEntry  

cntMsgIndex 1.3.6.1.4.1.333.1.1.3.1.1
The relative index of this mail box message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntMsgSeverity 1.3.6.1.4.1.333.1.1.3.1.2
The severity of this mail box message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER information-msg(1), possible-error(2), recoverable-error(3), fatal-error(4)  

cntMsgTaskName 1.3.6.1.4.1.333.1.1.3.1.3
The name of the module that sent this message to the mail box.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntMsgNumber 1.3.6.1.4.1.333.1.1.3.1.4
The number of this message. Each module numbers its message type as another way of describing it. This message can then be cross-referenced in the CNT system messages reference manual.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntMsgCpuNumber 1.3.6.1.4.1.333.1.1.3.1.5
The CPU of the module that sent this message to the mail box.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lcp-1(1), lcp-2(2), lcp-3(3), lcp-4(4), lcp-5(5), lcp-6(6), lcp-7(7)  

cntMsgNodeNumber 1.3.6.1.4.1.333.1.1.3.1.6
The node number of the module that sent this message to the mail box.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntMsgDateTime 1.3.6.1.4.1.333.1.1.3.1.7
The date and time that this message was sent to the mail box.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntMsgContent 1.3.6.1.4.1.333.1.1.3.1.8
The textual contents of the message sent to the mail box.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntMsgSeqNumber 1.3.6.1.4.1.333.1.1.3.1.9
The sequence number for this message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntSysHardware 1.3.6.1.4.1.333.1.1.4
OBJECT IDENTIFIER    

cntHwBBramType 1.3.6.1.4.1.333.1.1.4.1
The type of battery backed up memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bbram-6500(1), bbram-6704(2)  

cntHwBBramStatus 1.3.6.1.4.1.333.1.1.4.2
The status of the batteries used in the BBRAM. A failing status indicates that one or more of the batteries are failing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER good(1), failing(2)  

cntHwFailedCpu 1.3.6.1.4.1.333.1.1.4.3
The CPU number where a failure occurred. If this value is zero then there are no failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-failure(1), lcp-1(2), lcp-2(3), lcp-3(4), lcp-4(5), lcp-5(6), lcp-6(7), lcp-7(8)  

cntHwMonCpu 1.3.6.1.4.1.333.1.1.4.4
The CPU number of the monitor that noticed the CPU failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-failure(1), lcp-1(2), lcp-2(3), lcp-3(4), lcp-4(5), lcp-5(6), lcp-6(7), lcp-7(8)  

cntHwFailStatus 1.3.6.1.4.1.333.1.1.4.5
Status that the failing CPU recorded at the time of the failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-up(1), ok(2), abort-switch(3), abort-remote(4), parity-error(5), ac-failure(6), system-failure(7)  

cntHwMonFailStatus 1.3.6.1.4.1.333.1.1.4.6
Status that the monitoring CPU recorded at the time of the failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-up(1), ok(2), failed(3), mdm-error(4), poll-error(5)  

cntHwFailDate 1.3.6.1.4.1.333.1.1.4.7
Time and date when the processor failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntHwReset1Why 1.3.6.1.4.1.333.1.1.4.8
The reason for the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntHwReset1Date 1.3.6.1.4.1.333.1.1.4.9
The time and date of the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntHwReset2Why 1.3.6.1.4.1.333.1.1.4.10
The reason for the second-to-last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntHwReset2Date 1.3.6.1.4.1.333.1.1.4.11
The time and date of the second-to-last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntHwReset3Why 1.3.6.1.4.1.333.1.1.4.12
The reason for the third-to-last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntHwReset3Date 1.3.6.1.4.1.333.1.1.4.13
The time and date of the third-to-last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntHwPowerSupply 1.3.6.1.4.1.333.1.1.4.14
The status of the power supply or power supplies. This value will indicate good only if all power supplies in the node are working. If any fan or power supply is failing, this object will indicate a failure even if enough power is supplied to keep the node operating.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER good(1), bad(2)  

cntHwCpuTable 1.3.6.1.4.1.333.1.1.4.15
A list of CPU statistics entries. All possible CPUs for a box are accessible whether or not they even exist.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntHwCpuEntry

cntHwCpuEntry 1.3.6.1.4.1.333.1.1.4.15.1
A CPU statistics entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntHwCpuEntry  

cntCpuNum 1.3.6.1.4.1.333.1.1.4.15.1.1
The cpu index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lcp-1(1), lcp-2(2), lcp-3(3), lcp-4(4), lcp-5(5), lcp-6(6), lcp-7(7)  

cntCpuType 1.3.6.1.4.1.333.1.1.4.15.1.2
The type of the CPU requested.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-cpu(1), lcp-type1(2), lcp-type2(3), lcp-type3(4), lcp-type4(5)  

cntCpuSemCount 1.3.6.1.4.1.333.1.1.4.15.1.3
The number of semaphores for this CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntCpuSemLost 1.3.6.1.4.1.333.1.1.4.15.1.4
The number of semaphores lost for this CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntCpuStatus 1.3.6.1.4.1.333.1.1.4.15.1.5
The current known status of this CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-up(1), ok(2), abort-switch(3), abort-remote(4), parity-error(5), ac-failure(6), system-failure(7)  

cntCpuMonStatus 1.3.6.1.4.1.333.1.1.4.15.1.6
The current status of this CPU as known by the monitoring CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-up(1), ok(2), failed(3), mdm-error(4), poll-error(5)  

cntCpuPollStatus 1.3.6.1.4.1.333.1.1.4.15.1.7
The status of the current polling request for this CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), normal(2)  

cntCpuPolls 1.3.6.1.4.1.333.1.1.4.15.1.8
The number of polls sent for this CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntCpuResetDelayTime 1.3.6.1.4.1.333.1.1.4.15.1.9
The reset delay time, in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntCpuMonBy 1.3.6.1.4.1.333.1.1.4.15.1.10
The system number for the CPU monitoring this CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lcp-1(1), lcp-2(2), lcp-3(3), lcp-4(4), lcp-5(5), lcp-6(6), lcp-7(7)  

cntCpuPort 1.3.6.1.4.1.333.1.1.4.15.1.11
The port number for this CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntCpuUnclaims 1.3.6.1.4.1.333.1.1.4.15.1.12
The number of unclaimed grant interrupts on the system controller CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntCpuXtraInts 1.3.6.1.4.1.333.1.1.4.15.1.13
The number of spurious interrupts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntCpuLevel7s 1.3.6.1.4.1.333.1.1.4.15.1.14
The number of unidentified level seven interrupts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntCpuMsgRets 1.3.6.1.4.1.333.1.1.4.15.1.15
The number of undeliverable MDM interprocessor messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntCpuMsgHolds 1.3.6.1.4.1.333.1.1.4.15.1.16
The number of messages held which were being returned to the failed processor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntCpuResetFlag 1.3.6.1.4.1.333.1.1.4.15.1.17
The value of the reset flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cntCpuUtil 1.3.6.1.4.1.333.1.1.4.15.1.18
The CPU utilization, in percent utilized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntCpuLastFailDate 1.3.6.1.4.1.333.1.1.4.15.1.19
The date and time of the last failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntCpuLastChgDate 1.3.6.1.4.1.333.1.1.4.15.1.20
The date and time of the last change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntHwStatusLED 1.3.6.1.4.1.333.1.1.4.16
Two digit, LCD display. During system initialization it indicates the processor that is being initialized. Successful initialization is indicated by a display of '00'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntSysBuild 1.3.6.1.4.1.333.1.1.5
OBJECT IDENTIFIER    

cntRevDate 1.3.6.1.4.1.333.1.1.5.1
The BBRAM revision date of the system description (!RV2) file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cntCustomer 1.3.6.1.4.1.333.1.1.5.2
Customer name and other identifying information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntMachineType 1.3.6.1.4.1.333.1.1.5.3
The machine type of this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntSerialNumber 1.3.6.1.4.1.333.1.1.5.4
The machine serial number of this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntWorkOrderNumber 1.3.6.1.4.1.333.1.1.5.5
The original manufacturing build work order number of this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntChassisNumber 1.3.6.1.4.1.333.1.1.5.6
The machine chassis number of this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntModelNumber 1.3.6.1.4.1.333.1.1.5.7
The machine model number of this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntReleaseLevel 1.3.6.1.4.1.333.1.1.5.8
The original software release level installed in this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntRevEditDate 1.3.6.1.4.1.333.1.1.5.9
The date that this version of the system description (!RV2) file was edited dynamically.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cntRevEditTime 1.3.6.1.4.1.333.1.1.5.10
The time that this version of the system description (!RV2) file was edited dynamically.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cntFeatureTable 1.3.6.1.4.1.333.1.1.5.11
The list of manufacturing features originally installed in this node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntFeatureEntry

cntFeatureEntry 1.3.6.1.4.1.333.1.1.5.11.1
A node feature entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntFeatureEntry  

cntFeatureIndex 1.3.6.1.4.1.333.1.1.5.11.1.1
The feature index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFeatureName 1.3.6.1.4.1.333.1.1.5.11.1.2
The name of this feature.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntFeatureQuantity 1.3.6.1.4.1.333.1.1.5.11.1.3
The quantity of this feature.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFeatureDescr 1.3.6.1.4.1.333.1.1.5.11.1.4
A description of this feature.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntSlotTable 1.3.6.1.4.1.333.1.1.5.12
The list of VME slots in this node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntSlotEntry

cntSlotEntry 1.3.6.1.4.1.333.1.1.5.12.1
A node slot entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntSlotEntry  

cntSlotIndex 1.3.6.1.4.1.333.1.1.5.12.1.1
The slot index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntSlotName 1.3.6.1.4.1.333.1.1.5.12.1.2
The board name in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntSlotPartNumber 1.3.6.1.4.1.333.1.1.5.12.1.3
The part number for the board in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntSlotSerialNumber 1.3.6.1.4.1.333.1.1.5.12.1.4
The serial number for the board in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntSlotRevLevel 1.3.6.1.4.1.333.1.1.5.12.1.5
The revision number of the board in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntSlotInterface 1.3.6.1.4.1.333.1.1.5.12.1.6
The interface name of the board in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntSlotCpuNumber 1.3.6.1.4.1.333.1.1.5.12.1.7
The cpu number of the board in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lcp-1(1), lcp-2(2), lcp-3(3), lcp-4(4), lcp-5(5), lcp-6(6), lcp-7(7)  

cntSlotVMEbusGrant 1.3.6.1.4.1.333.1.1.5.12.1.8
The VME bus grant priority of the board in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntIOTable 1.3.6.1.4.1.333.1.1.5.13
The list of VME I/O boards in this node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntIOEntry

cntIOEntry 1.3.6.1.4.1.333.1.1.5.13.1
A node board entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntIOEntry  

cntIOIndex 1.3.6.1.4.1.333.1.1.5.13.1.1
The I/O board index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntIOName 1.3.6.1.4.1.333.1.1.5.13.1.2
The I/O board name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntIOPartNumber 1.3.6.1.4.1.333.1.1.5.13.1.3
The part number for this I/O board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntIOSerialNumber 1.3.6.1.4.1.333.1.1.5.13.1.4
The serial number for this I/O board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntIORevLevel 1.3.6.1.4.1.333.1.1.5.13.1.5
The revision number of this I/O board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntIOInterface 1.3.6.1.4.1.333.1.1.5.13.1.6
The interface name of this I/O board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntIOCpuNumber 1.3.6.1.4.1.333.1.1.5.13.1.7
The cpu number of this I/O board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lcp-1(1), lcp-2(2), lcp-3(3), lcp-4(4), lcp-5(5), lcp-6(6), lcp-7(7)  

cntPowerTable 1.3.6.1.4.1.333.1.1.5.14
The list of power supplies in this node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntPowerEntry

cntPowerEntry 1.3.6.1.4.1.333.1.1.5.14.1
A node power supply entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntPowerEntry  

cntPowerIndex 1.3.6.1.4.1.333.1.1.5.14.1.1
The power supply index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntPowerName 1.3.6.1.4.1.333.1.1.5.14.1.2
The power supply name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntPowerPartNumber 1.3.6.1.4.1.333.1.1.5.14.1.3
The part number for this power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntPowerSerialNumber 1.3.6.1.4.1.333.1.1.5.14.1.4
The serial number for this power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntPowerRevLevel 1.3.6.1.4.1.333.1.1.5.14.1.5
The revision number of this power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntSCRTable 1.3.6.1.4.1.333.1.1.5.15
The list of SCRs in this node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntSCREntry

cntSCREntry 1.3.6.1.4.1.333.1.1.5.15.1
A node SCR entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntSCREntry  

cntSCRIndex 1.3.6.1.4.1.333.1.1.5.15.1.1
The SCR index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntSCRNumber 1.3.6.1.4.1.333.1.1.5.15.1.2
A SCR number installed in this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntSerialAlfaNumber 1.3.6.1.4.1.333.1.1.5.16
The machine serial number of this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntSysMemory 1.3.6.1.4.1.333.1.1.6
OBJECT IDENTIFIER    

cntMemBBramAddress 1.3.6.1.4.1.333.1.1.6.1
The starting address of battery-backed-up RAM. BBRAM is used to store the software and configuration files.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntMemBBramSpace 1.3.6.1.4.1.333.1.1.6.2
The amount of BBRAM memory in bytes installed in this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntMemBBramFree 1.3.6.1.4.1.333.1.1.6.3
The amount of BBRAM memory in bytes available in this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntMemSramAddress 1.3.6.1.4.1.333.1.1.6.4
The starting address of static ram. SRAM is used as buffer space.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntMemSramSpace 1.3.6.1.4.1.333.1.1.6.5
The amount of SRAM memory in bytes installed in this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntMemSramFree 1.3.6.1.4.1.333.1.1.6.6
The amount of SRAM memory in bytes available in this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntSysCpuTable 1.3.6.1.4.1.333.1.1.7
List of cpu entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntSysCpuEntry

cntSysCpuEntry 1.3.6.1.4.1.333.1.1.7.1
A cpu entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntSysCpuEntry  

cntCpuIndex 1.3.6.1.4.1.333.1.1.7.1.1
The cpu index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lcp-1(1), lcp-2(2), lcp-3(3), lcp-4(4), lcp-5(5), lcp-6(6), lcp-7(7)  

cntCpuMemSpace 1.3.6.1.4.1.333.1.1.7.1.2
The amount of memory in bytes installed in this cpu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntCpuMemFree 1.3.6.1.4.1.333.1.1.7.1.3
The amount of memory in bytes available in this cpu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntCpuTaskTable 1.3.6.1.4.1.333.1.1.7.1.4
List of cpu task entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntCpuTaskEntry

cntCpuTaskEntry 1.3.6.1.4.1.333.1.1.7.1.4.1
A cpu task list entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntCpuTaskEntry  

cntCpuTaskIndex 1.3.6.1.4.1.333.1.1.7.1.4.1.1
The relative index of the task on this cpu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntCpuTaskName 1.3.6.1.4.1.333.1.1.7.1.4.1.2
The operating system name for a loaded and possibly executing task on this cpu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntinterfaces 1.3.6.1.4.1.333.1.2
OBJECT IDENTIFIER    

cntifTable 1.3.6.1.4.1.333.1.2.1
A list of CNT interface entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntifEntry

cntifEntry 1.3.6.1.4.1.333.1.2.1.1
An CNT interface entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntifEntry  

cntifIndex 1.3.6.1.4.1.333.1.2.1.1.1
An index value that uniquely identifies an interface on a CNT node. The interface identified by a particular value of this index is the same interface as identified by the same value of IfIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntifType 1.3.6.1.4.1.333.1.2.1.1.2
The type of interface. For standardized interface types in mib-2, this number is redundant. CNT specific interface types are appended to the end of the standardized list.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), regular1822(2), hdh1822(3), ddn-x25(4), rfc877-x25(5), ethernet(6), ethernet88023(7), tokenBus(8), tokenRing(9), smds(10), starLan(11), proteon-10MBit(12), proteon-80MBit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), t1(18), cept(19), basicIsdn(20), primaryIsdn(21), maintenance(22), ppp(23), sofwareLoopback(24), eon(25), ethernet-3Mbit(26), nsip(27), slip(28), ultra(29), ds3(30), sip(31), frame-relay(32), hssi-dte(33), fibre-trunk(34), hippi(35), crayfullduplex(36), pt-to-pt-fiber(37), channel-to-channel(38), peripheral-gateway(39), tape-pipelining(40), tape-dasd(41), hssi-dce(42), ibm-channel(43), dual-trunk(44), teradata(45), cray-hyperchannel(46), scsi-target(47), snmp-gateway(48), ppp-async(49), escon-host(50), escon-peripheral(51), tapecontrol-rs232(52), ultra-dte(53), ultra-dce(54), fddi-ss(55), hssi-ss(56), tunneling(57), stackstarter(58), ethernet-geni(59), tokenring-geni(60), atm(61), scsi-initiator(62), escon-srdf(63)  

cntifCpu 1.3.6.1.4.1.333.1.2.1.1.3
The cpu number where the device driver for this interface resides.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lcp-1(1), lcp-2(2), lcp-3(3), lcp-4(4), lcp-5(5), lcp-6(6), lcp-7(7)  

cntifSubIndex 1.3.6.1.4.1.333.1.2.1.1.4
A value that uniquely indexes an interface in a multiply-interfaced device driver.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntIfsState 1.3.6.1.4.1.333.1.2.2
A 32 bit-map of the interface states. The bits are ordered from 1 to 32 with the most significant bit on the left. if the bit is set, the corresponding interface is up. if the bit is clear, the interface is not up - down or in test mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnticmp 1.3.6.1.4.1.333.1.5
OBJECT IDENTIFIER    

cnticmpInDuNets 1.3.6.1.4.1.333.1.5.1
The number of times a destination unreachable message was received for an unreachable network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpInDuHosts 1.3.6.1.4.1.333.1.5.2
The number of times a destination unreachable message was received for an unreachable host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpInDuProtos 1.3.6.1.4.1.333.1.5.3
The number of times a destination unreachable message was received due to an unreachable protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpInDuPorts 1.3.6.1.4.1.333.1.5.4
The number of times a destination unreachable message was received due to an unreachable port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpInDuFrags 1.3.6.1.4.1.333.1.5.5
The number of times a destination unreachable message was received due to a fragmentation requirement but the Don't Fragment flag is set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpInDuSources 1.3.6.1.4.1.333.1.5.6
The number of times a destination unreachable message was received due to a source route that is not usable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpInTmXceeds 1.3.6.1.4.1.333.1.5.7
The number of times a time exceeded message was received for an expired datagram.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpInTmFrags 1.3.6.1.4.1.333.1.5.8
The number of times a time exceeded message was received for a datagram that could not be reassembled before its lifetime expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpInReNets 1.3.6.1.4.1.333.1.5.9
The number of times a redirect message was received due to a shorter path to a destination network having been found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpInReHosts 1.3.6.1.4.1.333.1.5.10
The number of times a redirect message was received due to a shorter path to a destination host having been found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpInReServnets 1.3.6.1.4.1.333.1.5.11
The number of times a redirect message was received due to a shorter path to a destination network with the requested type of service having been found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpInReServhosts 1.3.6.1.4.1.333.1.5.12
The number of times a redirect message was received due to a shorter path to a destination host with the requested type of service having been found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpOutDuNets 1.3.6.1.4.1.333.1.5.13
The number of times a destination unreachable message was sent to a requester when it attempted to send a datagram to an unreachable network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpOutDuHosts 1.3.6.1.4.1.333.1.5.14
The number of times a destination unreachable message was sent to a requester when it attempted to send a datagram to an unreachable host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpOutDuProtos 1.3.6.1.4.1.333.1.5.15
The number of times a destination unreachable message was sent to a requester when it attempted to send a datagram to an unreachable protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpOutDuPorts 1.3.6.1.4.1.333.1.5.16
The number of times a destination unreachable message was sent to a requester when it attempted to send a datagram to an unreachable port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpOutDuFrags 1.3.6.1.4.1.333.1.5.17
The number of times a destination unreachable message was sent to a requester when it attempted to send a datagram requiring fragmentation but the Don't Fragment flag is set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpOutDuSources 1.3.6.1.4.1.333.1.5.18
The number of times a destination unreachable message was sent due to a source route that is not usable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpOutTmXceeds 1.3.6.1.4.1.333.1.5.19
The number of times a time exceeded message was sent for an expired datagram.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpOutTmFrags 1.3.6.1.4.1.333.1.5.20
The number of times a time exceeded message was sent for a datagram that could not be reassembled before its lifetime expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpOutReNets 1.3.6.1.4.1.333.1.5.21
The number of times a redirect message was sent due to a shorter path to a destination network having been found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpOutReHosts 1.3.6.1.4.1.333.1.5.22
The number of times a redirect message was sent due to a shorter path to a destination host having been found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpOutReServnets 1.3.6.1.4.1.333.1.5.23
The number of times a redirect message was sent due to a shorter path to a destination network with the requested type of service having been found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnticmpOutReServhosts 1.3.6.1.4.1.333.1.5.24
The number of times a redirect message was sent due to a shorter path to a destination host with the requested type of service having been found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cnttransmission 1.3.6.1.4.1.333.1.10
OBJECT IDENTIFIER    

cntdot3 1.3.6.1.4.1.333.1.10.1
OBJECT IDENTIFIER    

cntdot3Table 1.3.6.1.4.1.333.1.10.1.1
Status information and control variables for a collection of ethernet software device drivers in a particular CNT system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntDot3Entry

cntdot3Entry 1.3.6.1.4.1.333.1.10.1.1.1
Status information and control variables for a particular CNT ethernet software device driver.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntDot3Entry  

cntdot3Index 1.3.6.1.4.1.333.1.10.1.1.1.1
An index value that uniquely identifies an interface to a CNT ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of IfIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdot3SoftwareID 1.3.6.1.4.1.333.1.10.1.1.1.2
The binary software revision number in the header of the ethernet driver.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cntdot3BufsAllocated 1.3.6.1.4.1.333.1.10.1.1.1.3
The number of CNT buffers allocated by the ethernet device driver at initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdot3BufTooManys 1.3.6.1.4.1.333.1.10.1.1.1.4
The number of buffers sent by a higher layer that were returned to that layer without transmission due to a full queue of waiting outbound buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3BufNotAvails 1.3.6.1.4.1.333.1.10.1.1.1.5
The number of requests made to the free pool of ethernet buffers that failed due to a lack buffers in that pool.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3BufPriority 1.3.6.1.4.1.333.1.10.1.1.1.6
The priority value assigned to inbound ethernet buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdot3PICBusErrs 1.3.6.1.4.1.333.1.10.1.1.1.7
The number of times a failure was detected when attempting to access the VME bus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3PICDMAErrs 1.3.6.1.4.1.333.1.10.1.1.1.8
The number of times ethernet local memory had a parity error during a DMA memory cycle. These errors would normally indicate a hardware problem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3PICMemSeqErrs 1.3.6.1.4.1.333.1.10.1.1.1.9
The number of times the hardware could not successfully arbitrate multiple requests to access ethernet local memory. These errors would normally indicate a hardware problem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3PICMemParityErrs 1.3.6.1.4.1.333.1.10.1.1.1.10
The number of ethernet local memory parity errors. These errors would normally indicate a hardware problem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3PICSpuriousInts 1.3.6.1.4.1.333.1.10.1.1.1.11
The number of interrupts generated by the PIC that were not mapped to any particular hardware event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3LanceInts 1.3.6.1.4.1.333.1.10.1.1.1.12
The number of LANCE hardware interrupts detected by the controlling CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3LanceParityErrs 1.3.6.1.4.1.333.1.10.1.1.1.13
The number of parity errors detected when the LANCE was accessing local memory. These errors would normally indicate a hardware problem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3LanceMemErrs 1.3.6.1.4.1.333.1.10.1.1.1.14
The number of times the LANCE detected a local memory access failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3LanceMissedPkts 1.3.6.1.4.1.333.1.10.1.1.1.15
The number of packets on the ethernet medium that were detected by the LANCE but failed to be captured in the inbound queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3LanceUnderFlows 1.3.6.1.4.1.333.1.10.1.1.1.16
The number of message truncated by the LANCE transmitter due to data late from memory. An underflow indication by the LANCE indicates that the silo was emptied before the end of the packet was reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3LanceOverFlows 1.3.6.1.4.1.333.1.10.1.1.1.17
The number of times the LANCE receiver lost all or part of the incoming packet due to an inability to store the packet in a memory buffer before the internal silo overflowed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3LanceTxWaitQ 1.3.6.1.4.1.333.1.10.1.1.1.18
The number of buffers in local memory and on the ethernet device driver's software queue awaiting transmission by the LANCE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdot3DMAChan1RxErr 1.3.6.1.4.1.333.1.10.1.1.1.19
The error code reported by the DMA controller channel 1. This channel is used to write inbound ethernet messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-error(0), config(1), operation-timing(2), address-mar(5), address-dar(6), address-bar(7), buserr-mar(9), buserr-dar(10), buserr-bar(11), count-mtc(13), count-btc(15), external-abort(16), external-software-abort(17)  

cntdot3DMAChan3RxErr 1.3.6.1.4.1.333.1.10.1.1.1.20
The error code reported by the DMA controller channel 3. This channel is used to write inbound ethernet messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-error(1), config(2), operation-timing(3), address-mar(6), address-dar(7), address-bar(8), buserr-mar(10), buserr-dar(11), buserr-bar(12), count-mtc(14), count-btc(16), external-abort(17), external-software-abort(18)  

cntdot3DMAChan0TxErr 1.3.6.1.4.1.333.1.10.1.1.1.21
The error code reported by the DMA controller channel 0. This channel is used to write outbound ethernet messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-error(1), config(2), operation-timing(3), address-mar(6), address-dar(7), address-bar(8), buserr-mar(10), buserr-dar(11), buserr-bar(12), count-mtc(14), count-btc(16), external-abort(17), external-software-abort(18)  

cntdot3DMAChan2TxErr 1.3.6.1.4.1.333.1.10.1.1.1.22
The error code reported by the DMA controller channel 2. This channel is used to write outbound ethernet messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-error(1), config(2), operation-timing(3), address-mar(6), address-dar(7), address-bar(8), buserr-mar(10), buserr-dar(11), buserr-bar(12), count-mtc(14), count-btc(16), external-abort(17), external-software-abort(18)  

cntdot3DMAChan1RxErrs 1.3.6.1.4.1.333.1.10.1.1.1.23
The number of errors reported by the DMA controller channel 1. This channel is used to write inbound ethernet messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3DMAChan3RxErrs 1.3.6.1.4.1.333.1.10.1.1.1.24
The number of errors reported by the DMA controller channel 1. This channel is used to write inbound ethernet messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3DMAChan0TxErrs 1.3.6.1.4.1.333.1.10.1.1.1.25
The number of errors reported by the DMA controller channel 1. This channel is used to write outbound ethernet messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3DMAChan2TxErrs 1.3.6.1.4.1.333.1.10.1.1.1.26
The number of errors reported by the DMA controller channel 1. This channel is used to write outbound ethernet messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3DMARxWaitQ 1.3.6.1.4.1.333.1.10.1.1.1.27
The number of successfully received ethernet messages awaiting transmission by the DMA to global memory buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdot3DMATxWaitQ 1.3.6.1.4.1.333.1.10.1.1.1.28
The number of buffers waiting in an outbound queue ready to transmitted to local memory from global memory. Buffers must be moved from global memory to local memory in order to be transmitted by the LANCE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdot3LPXParityErrs 1.3.6.1.4.1.333.1.10.1.1.1.29
The number of local memory parity errors during an LPX memory cycle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdot3Chan1Misreads 1.3.6.1.4.1.333.1.10.1.1.1.30
The number of times a mismatch was detected between the DMA channel 1 table and the DMA Memory Access Register.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntfddi 1.3.6.1.4.1.333.1.10.2
OBJECT IDENTIFIER    

cntFddiSMT 1.3.6.1.4.1.333.1.10.2.1
OBJECT IDENTIFIER    

cntFddiMAC 1.3.6.1.4.1.333.1.10.2.2
OBJECT IDENTIFIER    

cntFddiPATH 1.3.6.1.4.1.333.1.10.2.3
OBJECT IDENTIFIER    

cntFddiPORT 1.3.6.1.4.1.333.1.10.2.4
OBJECT IDENTIFIER    

cntFddiSMTNumber 1.3.6.1.4.1.333.1.10.2.1.1
The number of SMT implementations on this network management application entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

cntFddiSMTTable 1.3.6.1.4.1.333.1.10.2.1.2
A list of SMT entries. The number of entries is given by the value of snmpFddiSMTNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntFddiSMTEntry

cntFddiSMTEntry 1.3.6.1.4.1.333.1.10.2.1.2.1
An SMT entry containing information common to a given SMT.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntFddiSMTEntry  

cntFddiSMTIndex 1.3.6.1.4.1.333.1.10.2.1.2.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cntFddiSMTManufacturerData 1.3.6.1.4.1.333.1.10.2.1.2.1.2
32 octets of manufacturer data. The first component is the three octet Organizationally Unique Identifier (OUI) assigned by IEEE. The second component is the FDDI manufacturer's data (29 octets).
Status: optional Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cntFddiSMTUserData 1.3.6.1.4.1.333.1.10.2.1.2.1.3
32 octets of user defined information.
Status: optional Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cntFddiSMTReportLimit 1.3.6.1.4.1.333.1.10.2.1.2.1.4
Gives the limit on the number of Status Report Frames that shall be queued for transmission after supported Condition becomes inactive or after any supported Event has been detected.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiSMTMsgTimeStamp 1.3.6.1.4.1.333.1.10.2.1.2.1.5
This timestamp is used in some SMT frames as an indication of the time the message was created at the sending station. When read, the accessed value shall be greater than or equal to the value used in the station's last message. The timestamp may be reset whenever there is a discontinuity in the accumulation of a statistical counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cntFddiSMTTransitionTimeStamp 1.3.6.1.4.1.333.1.10.2.1.2.1.6
This timestamp holds the time of occurrence of the last condition or event in the station. It is used in the SMT Status Report Frame (SRF). It is set to a new value on each event to capture the time of the latest event occurrence. On power-up, the value of the attribute is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cntFddiSMTSetCount 1.3.6.1.4.1.333.1.10.2.1.2.1.7
This count is updated each time a parameter is changed on behalf of a request from either the local management interface or the remote interface via SMT Parameter Management Frames. It is used to provide consistency control for MIB updates.
Status: optional Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cntFddiSMTLastSetStationID 1.3.6.1.4.1.333.1.10.2.1.2.1.8
This object identifies the last station to set MIB information in the FDDI MIB.
Status: optional Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cntFddiMACNumber 1.3.6.1.4.1.333.1.10.2.2.1
The total number of MAC implementations across all SMTs on this network management application entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACTable 1.3.6.1.4.1.333.1.10.2.2.2
A list of MAC entries. The number of entries is given by the value of snmpFddiMACNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntFddiMACEntry

cntFddiMACEntry 1.3.6.1.4.1.333.1.10.2.2.2.1
A MAC entry containing information common to a given MAC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntFddiMACEntry  

cntFddiMACSMTIndex 1.3.6.1.4.1.333.1.10.2.2.2.1.1
The value of the SMT index associated with this MAC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cntFddiMACIndex 1.3.6.1.4.1.333.1.10.2.2.2.1.2
A unique value for each MAC on the managed entity. The MAC identified by a particular value of this index is that identified by the same value of an ifIndex object instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cntFddiMACBridgeFunction 1.3.6.1.4.1.333.1.10.2.2.2.1.3
Gives the bridge type for a MAC that has a bridge capability.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACDownstreamNbr 1.3.6.1.4.1.333.1.10.2.2.2.1.4
The MAC's downstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame Request/ Response protocol. It is optional an reported as zero in SMT frames if unknown or unsupported.
Status: optional Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cntFddiMACOldDownstreamNbr 1.3.6.1.4.1.333.1.10.2.2.2.1.5
This object identifies this MAC's previous downstream neighbor.
Status: optional Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cntFddiMACRootConcentratorMac 1.3.6.1.4.1.333.1.10.2.2.2.1.6
A MAC in a concentrator is a root concentrator MAC if its transmit path exits the concentrator via a Port in a peer node; or if the MAC exits via a Port in a tree node and there is no A, B, or S Ports that are active on that MAC's current Path.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACLongAlias 1.3.6.1.4.1.333.1.10.2.2.2.1.7
A possibly null set of 48 bit addresses (aliases) for this MAC.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACShortAlias 1.3.6.1.4.1.333.1.10.2.2.2.1.8
A possibly null set of 16 bit addresses (aliases) for this MAC.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACLongGrpAddr 1.3.6.1.4.1.333.1.10.2.2.2.1.9
A possibly null set of 48 bit group addresses (aliases) for this MAC.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACShortGrpAddr 1.3.6.1.4.1.333.1.10.2.2.2.1.10
A possibly null set of 16 bit group addresses (aliases) for this MAC.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACTPri0 1.3.6.1.4.1.333.1.10.2.2.2.1.11
Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACTPri1 1.3.6.1.4.1.333.1.10.2.2.2.1.12
Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACTPri2 1.3.6.1.4.1.333.1.10.2.2.2.1.13
Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACTPri3 1.3.6.1.4.1.333.1.10.2.2.2.1.14
Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACTPri4 1.3.6.1.4.1.333.1.10.2.2.2.1.15
Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACTPri5 1.3.6.1.4.1.333.1.10.2.2.2.1.16
Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACTPri6 1.3.6.1.4.1.333.1.10.2.2.2.1.17
Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2).
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACCopies 1.3.6.1.4.1.333.1.10.2.2.2.1.18
The count of frames successfully received into the station's receive buffers by this MAC. Note that this count does not include the frames that are not copied. This counter is optional.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiMACTransmits 1.3.6.1.4.1.333.1.10.2.2.2.1.19
The count of frames transmitted by the MAC.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiMACTokens 1.3.6.1.4.1.333.1.10.2.2.2.1.20
The total count of the number of times the station has received a token (total of non-restricted and restricted) on this MAC. This count is used for determination of network load.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiMACTvxExpires 1.3.6.1.4.1.333.1.10.2.2.2.1.21
A count of the times that TVX expired.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiMACNotCopies 1.3.6.1.4.1.333.1.10.2.2.2.1.22
The count of frames that should have been copied but were not. This might occur due to local buffer congestion. Because of implementation considerations, this count may be less than the actual number of frames not copied. It is not a requirement that this count be exact.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiMACLates 1.3.6.1.4.1.333.1.10.2.2.2.1.23
Reference: MAC 2.2.1, LateCt.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiMACRingOps 1.3.6.1.4.1.333.1.10.2.2.2.1.24
The count of the number of times the ring has entered the 'Ring Operational' state from 'Ring Not Operational' state. Because of implementation considerations, this count may not be exact.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiMACBaseFrames 1.3.6.1.4.1.333.1.10.2.2.2.1.25
The value of FddiMACFrameCt at the sample time prior to the sample time when the FrameErrorThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset when the associated condition becomes active.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiMACBaseErrs 1.3.6.1.4.1.333.1.10.2.2.2.1.26
The value of FddiMACErrorCt at the sample time prior to the sample time when the FrameErrorThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset to the current value of the corresponding 'real' counter when the associated condition becomes active.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiMACBaseLosts 1.3.6.1.4.1.333.1.10.2.2.2.1.27
The value of FddiMACLostCt at the sample time prior to the sample time when the FrameErrorThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset to the current value of the corresponding 'real' counter when the associated condition becomes active.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiMACBaseTimeFrameError 1.3.6.1.4.1.333.1.10.2.2.2.1.28
The value of the station timer at the sample time prior to the sample time when the FrameErrorThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset when the new condition becomes active.
Status: optional Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cntFddiMACBaseNotCopies 1.3.6.1.4.1.333.1.10.2.2.2.1.29
The value of FddiMACNotCopiedCt at the sample time prior to the sample time when the NotCopiedThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset when the new condition becomes active.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiMACBaseTimeNotCopied 1.3.6.1.4.1.333.1.10.2.2.2.1.30
The value of the station timer at the sample time prior to the sample time when the NotCopiedThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset when the new condition becomes active.
Status: optional Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cntFddiMACNotCopiedThreshold 1.3.6.1.4.1.333.1.10.2.2.2.1.31
A threshold for determining when a MAC Condition report should be generated. It is used to determine when a station has an unacceptable count of frames 'not-copied'. It could be used as an indication of buffer congestion on this MAC.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACBaseCopies 1.3.6.1.4.1.333.1.10.2.2.2.1.32
The value of FddiMACCopiedCt at the sample time prior to the sample time when the NotCopiedThreshold was reached. It is used in reporting the condition to give the manager the necessary data to reconstruct the condition at the station. Reset when the new condition becomes active.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiMACNotCopiedRatio 1.3.6.1.4.1.333.1.10.2.2.2.1.33
This attribute is the value of the ratio: FddiMACNotCopiedCt ----------------------------------- * (2 ** 16) FddiMACCopiedCt + FddiMACNotCopiedCt
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACNotCopiedCondition 1.3.6.1.4.1.333.1.10.2.2.2.1.34
Indicates the NotCopiedCondition is active when set. Cleared when the condition clears and on power up.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACLLCServiceAvailable 1.3.6.1.4.1.333.1.10.2.2.2.1.35
Indicates whether the LLC Service is enabled.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACMasterSlaveLoopStatus 1.3.6.1.4.1.333.1.10.2.2.2.1.36
Indicates this MAC's Master/Slave Loop Status. This status would be obtained with the Root MAC Information Protocol.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACRootMACDownStreamPORTType 1.3.6.1.4.1.333.1.10.2.2.2.1.37
Indicates the PC-Type of the first PORT that is downstream of the Root MAC associated with this MAC. The Root MAC information would be determined in the Root MAC Information Protocol.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiMACRootMACCurrentPath 1.3.6.1.4.1.333.1.10.2.2.2.1.38
Indicates the current path of the Root MAC on the same logical ring as this MAC. This Root MAC information would be determined in the Root MAC Information Protocol.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPATHNumber 1.3.6.1.4.1.333.1.10.2.3.1
The total number of PATH implementations across all SMTs on this network management application entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

cntFddiPATHTable 1.3.6.1.4.1.333.1.10.2.3.2
A list of PATH entries. The number of entries is given by the value of snmpFddiPATHNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntFddiPATHEntry

cntFddiPATHEntry 1.3.6.1.4.1.333.1.10.2.3.2.1
A PATH entry containing information common to a given PATH.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntFddiPATHEntry  

cntFddiPATHSMTIndex 1.3.6.1.4.1.333.1.10.2.3.2.1.1
The value of the SMT index associated with this PATH.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cntFddiPATHIndex 1.3.6.1.4.1.333.1.10.2.3.2.1.2
A unique value for each PATH within a given SMT. Its value ranges between 1 and the sum of the values of snmpFddiSMTNonMasterCt and snmpFddiSMTMasterCt on the given SMT.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cntFddiPATHTraceMaxExpiration 1.3.6.1.4.1.333.1.10.2.3.2.1.3
Reference: SMT 9.4.4.2.2 TraceMax.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPATHTVXLowerBound 1.3.6.1.4.1.333.1.10.2.3.2.1.4
The lower bound of TVX supported for this PATH.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPATHTMaxLowerBound 1.3.6.1.4.1.333.1.10.2.3.2.1.5
The lower bound of TMax supported for this PATH class.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPATHType 1.3.6.1.4.1.333.1.10.2.3.2.1.6
This object describes the type of PATH: 1 = Primary, 2 = Secondary, 3 = Local.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPATHPORTOrder 1.3.6.1.4.1.333.1.10.2.3.2.1.7
Tells whether the PORTs on this path are numbered in ascending of descending order.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPATHRingLatency 1.3.6.1.4.1.333.1.10.2.3.2.1.8
Gives the total accumulated latency of the ring associated with this PATH. May be measured directly by the station or may be calculated by a management station.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPATHTraceStatus 1.3.6.1.4.1.333.1.10.2.3.2.1.9
Gives the current trace status of the PATH.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPATHSba 1.3.6.1.4.1.333.1.10.2.3.2.1.10
The Synchronous Bandwidth Allocation for this PATH within the station in octet units. In stations that don't support synchronous service, this attribute is read only and has the value of 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPATHSbaOverhead 1.3.6.1.4.1.333.1.10.2.3.2.1.11
The Synchronous Bandwidth Allocation overhead for this PATH (bytes/frame). In stations that don't support synchronous service, this attribute is read only and has the value of 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPATHStatus 1.3.6.1.4.1.333.1.10.2.3.2.1.12
The current status of the PATH.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPATHTRmode 1.3.6.1.4.1.333.1.10.2.3.2.1.13
Used by RMT to limit the duration of restricted dialogs on a PATH.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPORTNumber 1.3.6.1.4.1.333.1.10.2.4.1
The total number of PORT implementations across all SMTs on this network management application entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

cntFddiPORTTable 1.3.6.1.4.1.333.1.10.2.4.2
A list of PORT entries. The number of entries is given by the value of snmpFddiPORTNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntFddiPORTEntry

cntFddiPORTEntry 1.3.6.1.4.1.333.1.10.2.4.2.1
A PORT entry containing information common to a given PORT.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntFddiPORTEntry  

cntFddiPORTSMTIndex 1.3.6.1.4.1.333.1.10.2.4.2.1.1
The value of the SMT index associated with this PORT.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cntFddiPORTIndex 1.3.6.1.4.1.333.1.10.2.4.2.1.2
A unique value for each PORT within a given SMT. Its value ranges between 1 and the sum of the values of snmpFddiSMTNonMasterCt and snmpFddiSMTMasterCt on the given SMT.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cntFddiPORTFotxClass 1.3.6.1.4.1.333.1.10.2.4.2.1.3
The Fiber Optic Transmitter Class.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPORTMaintLineState 1.3.6.1.4.1.333.1.10.2.4.2.1.4
The current maintenance line status of this PORT.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPORTEBErrs 1.3.6.1.4.1.333.1.10.2.4.2.1.5
The count of the times an Elasticity Buffer Error has occurred.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiPORTBaseLerEstimate 1.3.6.1.4.1.333.1.10.2.4.2.1.6
The value of FddiPORTLerEstimate at the sample time prior to when the sample time that the PORT LER Event was generated (the condition became active).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPORTBaseLemRejects 1.3.6.1.4.1.333.1.10.2.4.2.1.7
The value of FddiPORTLerRejectCt at the sample time prior to when the sample time that the PORT LER Event was generated (the condition became active).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiPORTBaseLems 1.3.6.1.4.1.333.1.10.2.4.2.1.8
The value of FddiPORTLerCt at the sample time prior to when the sample time that the PORT LER Event was generated (the condition became active).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiPORTBaseLerTimeStamp 1.3.6.1.4.1.333.1.10.2.4.2.1.9
The value of FddiSMTMsgTimestamp at the sample time prior to when the sample time that the PORT LER Event was generated (the condition became active).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cntsnmp 1.3.6.1.4.1.333.1.11
OBJECT IDENTIFIER    

cntsnmpconfig 1.3.6.1.4.1.333.1.11.1
OBJECT IDENTIFIER    

cntMibVersion 1.3.6.1.4.1.333.1.11.1.1
The version identifier of the mib file that the agent has loaded from BBRAM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cntMibObjectCount 1.3.6.1.4.1.333.1.11.1.2
Number of objects in the MIB description file, !MIB, in this CNT platform. This file contains objects from RFC 1213, RFC 1284, RFC 1285, and CNT's enterprise. Depending upon the configuration of this node, the node may or may not support all of these objects.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntConfigVersion 1.3.6.1.4.1.333.1.11.1.3
Version number of this SNMP agent from the configuration record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntProxyStatus 1.3.6.1.4.1.333.1.11.1.4
This flag indicates whether this SNMP agent is acting as a proxy, is being proxied, or is a normally behaving SNMP agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-proxy(1), proxy-agent(2), proxied-node(3)  

cntProxyCount 1.3.6.1.4.1.333.1.11.1.5
If this node is configured to operate as a proxy agent, this number reflects the number of proxied nodes that this node is configured to manage in !NDE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntSnmpBufferCount 1.3.6.1.4.1.333.1.11.1.6
Number of buffers reserved for this SNMP agent for outgoing message from the configuration record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntIfPollInterval 1.3.6.1.4.1.333.1.11.1.7
Number of seconds for the SNMP agent to wait between checks of the CNT platform's interfaces for operation status. These interface checks result in the link down and link up traps. This value is from the configuration record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntIfNextPoll 1.3.6.1.4.1.333.1.11.1.8
Number of seconds for the next internal SNMP agent interface poll. These interface checks result in the link down and link up traps. This value is from the configuration record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntDoDIPCount 1.3.6.1.4.1.333.1.11.1.9
The number of DoD IP addresses (internet records in !CFG) configured in this node that the agent detected upon startup. This will not equal the number of interfaces on this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntDot3Count 1.3.6.1.4.1.333.1.11.1.10
The number of ethernet interfaces that are manageable by this agent on this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiCount 1.3.6.1.4.1.333.1.11.1.11
The number of FDDI interfaces that are manageable by this agent on this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntFddiPortCount 1.3.6.1.4.1.333.1.11.1.12
The number of FDDI ports that are manageable by this agent on this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntDataLinkCount 1.3.6.1.4.1.333.1.11.1.13
The number of Data Link Layers Instances that are manageable by this agent on this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntLLC1Count 1.3.6.1.4.1.333.1.11.1.14
The number of Data Link Layers Instances of type Logical Link Control 1 (ISO 8802/2) that are manageable by this agent on this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntCofiVersion 1.3.6.1.4.1.333.1.11.1.15
The version of the the COmmon File Interface (COFI) module that is loaded into this node. COFI is required by the snmp agent for access to some CNT system objects. The version is in the format: version.day.month.year.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cntsnmpstat 1.3.6.1.4.1.333.1.11.2
OBJECT IDENTIFIER    

cntMib2Requests 1.3.6.1.4.1.333.1.11.2.1
The number of requests received by the agent for mib-2 objects.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntFddiRequests 1.3.6.1.4.1.333.1.11.2.2
The number of requests received by the agent for FDDI objects in the experimental or transmission subtree.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntDot3Requests 1.3.6.1.4.1.333.1.11.2.3
The number of requests received by the agent for 802.3 objects in the experimental or transmission subtree.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntCntRequests 1.3.6.1.4.1.333.1.11.2.4
The number of requests received by the agent for objects in the Computer Network Technology Corp. private enterprise subtree.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntRowAdditions 1.3.6.1.4.1.333.1.11.2.5
The number of table row additions that have been successful through SNMP requests from a network management station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntRowModifies 1.3.6.1.4.1.333.1.11.2.6
The number of table row modifications that have been successful through SNMP requests from a network management station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntRowDeletions 1.3.6.1.4.1.333.1.11.2.7
The number of table row deletions that have been successful through SNMP requests from a network management station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntRowErrors 1.3.6.1.4.1.333.1.11.2.8
The number of table row additions that were attempted through SNMP requests from a network management station, but were not complete in a single request. These requests were not successfully completed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntBadVersions 1.3.6.1.4.1.333.1.11.2.9
The number of table row additions that were attempted through SNMP requests from a network management station, but were not complete in a single request. These requests were not successfully completed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntNoBuffers 1.3.6.1.4.1.333.1.11.2.10
The number of times the agent needed a buffer and did not have one. The agent uses buffers when making requests to the MEs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntMailTimeouts 1.3.6.1.4.1.333.1.11.2.11
The number of timeouts received from the MEs when a mib request was given.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntCachedResponses 1.3.6.1.4.1.333.1.11.2.12
The number of requests to the MEs that were cached. Each cached message contains as many mib objects as the request to the ME.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntUsedCaches 1.3.6.1.4.1.333.1.11.2.13
The number of objects for which the cached mib objects were used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntsnmptrap 1.3.6.1.4.1.333.1.11.3
OBJECT IDENTIFIER    

cntTrapDestCount 1.3.6.1.4.1.333.1.11.3.1
The number of trap destinations that the agent will forward the configured traps to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntLastTrapMsg 1.3.6.1.4.1.333.1.11.3.2
Textual description of the last trap message sent from this SNMP agent. The object identifier for cntSysLastTrapMsg is sent along with each trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntTrapTable 1.3.6.1.4.1.333.1.11.3.3
A list of trap entries. There is a maximum of six trap entries. These values, except TrapIf, are set in the configuration record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntTrapEntry

cnttrapEntry 1.3.6.1.4.1.333.1.11.3.3.1
A trap entry containing the information needed to send out a trap.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntTrapEntry  

cnttrapIndex 1.3.6.1.4.1.333.1.11.3.3.1.1
Trap table index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnttrapAddress 1.3.6.1.4.1.333.1.11.3.3.1.2
Trap destination address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cntsnmpTrapFlags 1.3.6.1.4.1.333.1.11.3.3.1.3
Flag setting specifying which types of traps to send to this destination. This value is derived from 'or'ing the following values: cold start(0x01), link down(0x04), link up(0x08), and authentication failure(0x10).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntTrapFlags 1.3.6.1.4.1.333.1.11.3.3.1.4
Flag settings reserved for future enterprise specific trap enabling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnttrapIf 1.3.6.1.4.1.333.1.11.3.3.1.5
Trap source address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cntsnmpproxy 1.3.6.1.4.1.333.1.11.4
OBJECT IDENTIFIER    

cntProxyTable 1.3.6.1.4.1.333.1.11.4.1
A list of proxy entries. This table contains an entry for each proxied node from this proxy agent. If this node is not configured as a proxy agent then this table is empty.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntProxyEntry

cntproxyEntry 1.3.6.1.4.1.333.1.11.4.1.1
A proxy entry containing the information needed to carry an SNMP request to a proxied node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntProxyEntry  

cntproxyIndex 1.3.6.1.4.1.333.1.11.4.1.1.1
Proxy table index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntproxyAddress 1.3.6.1.4.1.333.1.11.4.1.1.2
Proxied node destination DoD IP address that is used by the NMS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cntproxyNode 1.3.6.1.4.1.333.1.11.4.1.1.3
Proxied node destination CNT node address that is used by the local CNT router to access the destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cntdiagnostics 1.3.6.1.4.1.333.1.12
OBJECT IDENTIFIER    

cntTraceTable 1.3.6.1.4.1.333.1.12.1
List of entries in the global trace area.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntTraceEntry

cnttraceEntry 1.3.6.1.4.1.333.1.12.1.1
A trace entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntTraceEntry  

cnttraceIndex 1.3.6.1.4.1.333.1.12.1.1.1
The index which uniquely identifies the trace row instance in a CNT node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnttraceType 1.3.6.1.4.1.333.1.12.1.1.2
The type of trace entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnttraceCpu 1.3.6.1.4.1.333.1.12.1.1.3
The CPU number of the module that entered this trace entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lcp-1(1), lcp-2(2), lcp-3(3), lcp-4(4), lcp-5(5), lcp-6(6), lcp-7(7)  

cnttraceData 1.3.6.1.4.1.333.1.12.1.1.4
The remaining 14 octets of trace information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cntMailQueue 1.3.6.1.4.1.333.1.12.2
OBJECT IDENTIFIER    

cntMDMTable 1.3.6.1.4.1.333.1.12.2.1
A list of Message Distribution Manager (MDM) interprocessor queue global table entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntMDMEntry

cntMDMEntry 1.3.6.1.4.1.333.1.12.2.1.1
A Message Distribution Manager (MDM) queue global table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntMDMEntry  

cntmdmQIndex 1.3.6.1.4.1.333.1.12.2.1.1.1
The relative index of the MDM entry in the system's global table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntmdmQName 1.3.6.1.4.1.333.1.12.2.1.1.2
The MDM queue name for this entry in the system global table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntmdmQProcessId 1.3.6.1.4.1.333.1.12.2.1.1.3
The MDM processor number for this entry in the system global table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntmdmQTaskId 1.3.6.1.4.1.333.1.12.2.1.1.4
The MDM task identifier for this entry in the system global table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntmdmQList 1.3.6.1.4.1.333.1.12.2.2
The MDM queue name list in one long string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  


cntdlNumber 1.3.6.1.4.1.333.1.13.1
The number of network data link layers present on this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdlTable 1.3.6.1.4.1.333.1.13.2
A list of data link layer entries. The number of entries is given by the value of cntdlNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntDLEntry

cntdlEntry 1.3.6.1.4.1.333.1.13.2.1
A data link layer entry containing objects for a particular data link layer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntDLEntry  

cntdlIndex 1.3.6.1.4.1.333.1.13.2.1.1
A unique value for each data link layer. It's value ranges between one and the value of dlNumber. The value for each data link layer must remain constant at least from one reinitialization of the entity's network management system to the next reinitialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdlDescr 1.3.6.1.4.1.333.1.13.2.1.2
A textual string containing information about the data link layer. This string should include the name of the manufacturer, the product name and the version of the data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntdlType 1.3.6.1.4.1.333.1.13.2.1.3
The type of this data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER llc1(1), llc2(2), llc3(3), snap(4), cnet(5), dnls(6), strp(7), ppp(8)  

cntdlTypeofService 1.3.6.1.4.1.333.1.13.2.1.4
The type of this data link layer service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unacked-connectionless(1), connection-oriented(2), acked-connectionless(3)  

cntdlMtu 1.3.6.1.4.1.333.1.13.2.1.5
The size of the largest datagram which can be sent/received on this data link layer, specified in octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdlPortAddrLen 1.3.6.1.4.1.333.1.13.2.1.6
The length of all port addresses used by this data link layer service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdlMaxPort 1.3.6.1.4.1.333.1.13.2.1.7
The maximum number of ports supported by this data link layer service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdlActivePort 1.3.6.1.4.1.333.1.13.2.1.8
The current number of active ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdlInOctets 1.3.6.1.4.1.333.1.13.2.1.9
The total number of octets received on this data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdlInUcastPkts 1.3.6.1.4.1.333.1.13.2.1.10
The number of unicast packets delivered to a higher layer protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdlInNUcastPkts 1.3.6.1.4.1.333.1.13.2.1.11
The number of non-unicast packets delivered to a higher layer protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdlInDiscards 1.3.6.1.4.1.333.1.13.2.1.12
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher layer protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdlInErrors 1.3.6.1.4.1.333.1.13.2.1.13
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdlInUnknownProtos 1.3.6.1.4.1.333.1.13.2.1.14
The number of packets received via the data link layer which were discareded because of an unknown or unsupported protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdlOutOctets 1.3.6.1.4.1.333.1.13.2.1.15
The total number of octets transmitted by this this data link layer service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdlOutUcastPkts 1.3.6.1.4.1.333.1.13.2.1.16
The total number of packets that higher-level protocols requested be transmitted to a unicast address, including those that were discarded or not sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdlOutNUcastPkts 1.3.6.1.4.1.333.1.13.2.1.17
The total number of packets that higher-level protocols requested be transmitted to a non-unicast address, including those that were discarded or not sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdlOutDiscards 1.3.6.1.4.1.333.1.13.2.1.18
The number of outbound packets which were chose to be discarded even though no errors had been detected to prevent their being transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdlOutErrors 1.3.6.1.4.1.333.1.13.2.1.19
The number of outbound packets that could not be transmitted because of errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntdlOutQLen 1.3.6.1.4.1.333.1.13.2.1.20
The length of the output packet queue, in packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cntdlPortTable 1.3.6.1.4.1.333.1.13.2.1.21
A list of data link layer entries. The number of entries is given by the value of dlActivePorts.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntDLPortEntry

cntdlPortEntry 1.3.6.1.4.1.333.1.13.2.1.21.1
A data link layer entry containing objects for a particular port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntDLPortEntry  

cntdlPortIndex 1.3.6.1.4.1.333.1.13.2.1.21.1.1
The port entry's index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdlState 1.3.6.1.4.1.333.1.13.2.1.21.1.2
The state of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), data-transfer(2), disconnected(3), waiting-for-ack(4), down(5), closed(6), listen(7), ack-sent(8)  

cntdlSourcePort 1.3.6.1.4.1.333.1.13.2.1.21.1.3
The source port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdlDestPort 1.3.6.1.4.1.333.1.13.2.1.21.1.4
The destination port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntdlPortType 1.3.6.1.4.1.333.1.13.2.1.21.1.5
The port type. This value is not redundant to dlType since a link layer service may support multiple port types. For example, LLC1 has both llc1 and snap ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dod-ip(1), arp(2), snmp(3)  

cntllc1 1.3.6.1.4.1.333.1.13.3
OBJECT IDENTIFIER    

cntllc1ConfigTable 1.3.6.1.4.1.333.1.13.3.1
A list of the LLC1 configuration entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntLLC1ConfigEntry

cntllc1ConfigEntry 1.3.6.1.4.1.333.1.13.3.1.1
A LLC1 configuration entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntLLC1ConfigEntry  

cntllc1ConfigIndex 1.3.6.1.4.1.333.1.13.3.1.1.1
The index that uniquely identifies an instance of a LLC1 process in a CNT node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntllc1DriverType 1.3.6.1.4.1.333.1.13.3.1.1.2
The physical layer device driver type that has identified to this llc1 service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER cnt-node(1), fddi(2), fibre-trunk(3), native(4), ethernet(5), hippi(6)  

cntllc1Addr 1.3.6.1.4.1.333.1.13.3.1.1.3
The MAC address for the physical layer over which this link layer is operating.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cntllc1InitFlag 1.3.6.1.4.1.333.1.13.3.1.1.4
The initialization flag indicating whether or not this module has finished initializing the data link layer stack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER uninitialized(1), initialized(2)  

cntllc1TraceFlag 1.3.6.1.4.1.333.1.13.3.1.1.5
The trace flags in bit-oriented form. The values are as follows: .... ...1 - phase 2 entry point .... ..1. - phase 3 entry point .... .1.. - messages in .... 1... - transmit completions ...1 .... - messages received ..1. .... - message to a ULP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntllc1BufCnt 1.3.6.1.4.1.333.1.13.3.1.1.6
The number of free buffers in the free pool.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntllc1BusId 1.3.6.1.4.1.333.1.13.3.1.1.7
The bus number for this network interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntllc1CpuNum 1.3.6.1.4.1.333.1.13.3.1.1.8
The CPU number where this data link layer is running, 1 through 8.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lcp-1(1), lcp-2(2), lcp-3(3), lcp-4(4), lcp-5(5), lcp-6(6), lcp-7(7)  

cntllc1BufPriority 1.3.6.1.4.1.333.1.13.3.1.1.9
The assigned buffer priority for messages received from the physical layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntllc1WaitTimeOut 1.3.6.1.4.1.333.1.13.3.1.1.10
The wait timeout in seconds for XID/TEST frames sent to a peer llc1 data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntllc1StatsTable 1.3.6.1.4.1.333.1.13.3.2
A list of LLC1 statistics entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntLLC1StatsEntry

cntllc1StatsEntry 1.3.6.1.4.1.333.1.13.3.2.1
A LLC1 statistics entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntLLC1StatsEntry  

cntllc1StatIndex 1.3.6.1.4.1.333.1.13.3.2.1.1
The index that uniquely identifies an instance of a LLC1 process in a CNT node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntllc1InXids 1.3.6.1.4.1.333.1.13.3.2.1.2
The number of LLC XID frames received from a peer data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InTests 1.3.6.1.4.1.333.1.13.3.2.1.3
The number of LLC TEST frames received from a peer data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InUIs 1.3.6.1.4.1.333.1.13.3.2.1.4
The number of LLC UI frames received from a peer data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InNoDsaps 1.3.6.1.4.1.333.1.13.3.2.1.5
The number of unknown DSAPs received from a peer data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InXidOks 1.3.6.1.4.1.333.1.13.3.2.1.6
The number of successful LLC XID frames from a peer data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InTestOks 1.3.6.1.4.1.333.1.13.3.2.1.7
The number of successful LLC TEST frames from a peer data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InSnapIps 1.3.6.1.4.1.333.1.13.3.2.1.8
The number of SNAP IP packets received from a peer SNAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InSnapArps 1.3.6.1.4.1.333.1.13.3.2.1.9
The number of SNAP ARP packets received from a peer SNAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InSnapNoProts 1.3.6.1.4.1.333.1.13.3.2.1.10
The number of unknown SNAP protocols received from a peer SNAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InSnapNoTypes 1.3.6.1.4.1.333.1.13.3.2.1.11
The number of unknown SNAP ethertypes received from a peer SNAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutSnapIps 1.3.6.1.4.1.333.1.13.3.2.1.12
The number of SNAP IP packets sent to a peer SNAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutSnapArps 1.3.6.1.4.1.333.1.13.3.2.1.13
The number of SNAP ARP packets sent to a peer SNAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutXids 1.3.6.1.4.1.333.1.13.3.2.1.14
The number of LLC XID requests sent to a peer data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutXidResps 1.3.6.1.4.1.333.1.13.3.2.1.15
The number of LLC XID responses received from a peer data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutTests 1.3.6.1.4.1.333.1.13.3.2.1.16
The number of LLC TEST requests sent to a peer data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutTestResps 1.3.6.1.4.1.333.1.13.3.2.1.17
The number of LLC TEST responses sent to a peer data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutRetOks 1.3.6.1.4.1.333.1.13.3.2.1.18
The number of packets passed successfully to the physical layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutFragPkts 1.3.6.1.4.1.333.1.13.3.2.1.19
The number of packet sent with fragments.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1ErrorTable 1.3.6.1.4.1.333.1.13.3.3
A list of LLC1 error entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntLLC1ErrorEntry

cntllc1ErrorEntry 1.3.6.1.4.1.333.1.13.3.3.1
A LLC1 error entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntLLC1ErrorEntry  

cntllc1ErrorIndex 1.3.6.1.4.1.333.1.13.3.3.1.1
The index that uniquely identifies an instance of a LLC1 process in a CNT node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntllc1ArpMailErrs 1.3.6.1.4.1.333.1.13.3.3.1.2
The number of errors encountered when mailing to ARP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1IpMailErrs 1.3.6.1.4.1.333.1.13.3.3.1.3
The number of errors encountered when mailing to IP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutXmitErrs 1.3.6.1.4.1.333.1.13.3.3.1.4
The number of times and error was received from the physical layer when a transmission was attempted by this data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutMcastErrs 1.3.6.1.4.1.333.1.13.3.3.1.5
The number of times and error was received from the physical layer when a multicast message was attempted by this data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1XidErrs 1.3.6.1.4.1.333.1.13.3.3.1.6
The number of times and error was received from the physical layer when an LLC XID message was attempted by this data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1TestErrs 1.3.6.1.4.1.333.1.13.3.3.1.7
The number of times and error was received from the physical layer when an LLC TEST message was attempted by this data link layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InBadTypes 1.3.6.1.4.1.333.1.13.3.3.1.8
The number of messages received from a peer data link layer with invalid or unsupported LLC type fields.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutMismIpSizes 1.3.6.1.4.1.333.1.13.3.3.1.9
The number of messages received from a ULP that has an included IP header that indicates the message size is smaller than the actual size of the message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutBadIpSizes 1.3.6.1.4.1.333.1.13.3.3.1.10
The number of messages received from a ULP that has an included IP header that indicates the message size is larger than the actual size of the message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InMismIpSizes 1.3.6.1.4.1.333.1.13.3.3.1.11
The number of messages received from a physical layer that has an included IP header that indicates the message size is smaller than the actual size of the message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InBadIpSizes 1.3.6.1.4.1.333.1.13.3.3.1.12
The number of messages received from a physical layer that has an included IP header that indicates the message size is larger than the actual size of the message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InLateXids 1.3.6.1.4.1.333.1.13.3.3.1.13
The number of times an LLC XID request was sent to a peer data link layer and the return reponse was late or invalid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1InLateTests 1.3.6.1.4.1.333.1.13.3.3.1.14
The number of times an LLC TEST request was sent to a peer data link layer and the return reponse was late or invalid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutTooBigs 1.3.6.1.4.1.333.1.13.3.3.1.15
The number of times this link layer service could not build the outgoing message due to a Maximum Transmission Unit (MTU) limitation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutNoRooms 1.3.6.1.4.1.333.1.13.3.3.1.16
The number of times this data link layer service could not build the outgoing message due to lack of space in the s_message area of the buffer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntllc1OutRetBads 1.3.6.1.4.1.333.1.13.3.3.1.17
The number of times the physical layer returned an error upon return of the message to this data link layer service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntlua 1.3.6.1.4.1.333.1.14
OBJECT IDENTIFIER    

cntLuaCount 1.3.6.1.4.1.333.1.14.1
The number of Logical Unit Adaptors (LUAs) present on this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntLuaTable 1.3.6.1.4.1.333.1.14.2
A list of entries describing an individual Logical Unit Adaptor (LUA). A specific lua object is terminated with the channel number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntLuaEntry

cntluaEntry 1.3.6.1.4.1.333.1.14.2.1
An individual LUA entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntLuaEntry  

cntluaIf 1.3.6.1.4.1.333.1.14.2.1.1
The corresponding SNMP interface index for this LUA.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntluaNumber 1.3.6.1.4.1.333.1.14.2.1.2
The LUA number (0-255).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntSubChanCount 1.3.6.1.4.1.333.1.14.2.1.3
The number of subchannels on the LUA (0-255).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntSubChanTable 1.3.6.1.4.1.333.1.14.2.1.4
A list of entries describing an individual subchannel. A specific subchannel object is referenced from the LUA table with instance object identifiers .lua.subchannel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CntSubchanEntry

cntsubchanEntry 1.3.6.1.4.1.333.1.14.2.1.4.1
An individual subchannel entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CntSubchanEntry  

cntsctIndex 1.3.6.1.4.1.333.1.14.2.1.4.1.1
The relative subchannel index for this lua.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntsctNumber 1.3.6.1.4.1.333.1.14.2.1.4.1.2
The sub-channel number (0-255).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntsctTxStatus 1.3.6.1.4.1.333.1.14.2.1.4.1.3
Bit value for the transmit status. Bit Definition 0 Transmit to be cancelled 4 Transmit in operation 8 Buffer available to subchannel 9 Subchannel ready to accept POST_XMITs
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntsctRxStatus 1.3.6.1.4.1.333.1.14.2.1.4.1.4
Bit value for the receive status. Bit Definition 0 Receive operation begun from host 1 Receive enabled/disabled 2 Cancel current receive message sequence 3 Pending associated data sequence 4 Request transport error notification
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntsctSubChanStatus 1.3.6.1.4.1.333.1.14.2.1.4.1.5
Bit value for the device subchannel status. Bit Definition 0 Subchannel is allocated 1 Subchannel is established 2 Subchannel is sharable 3 Subchannel has dedicated buffers 4 Subchannel has pending completion 5 Subchannel has xmit multiple from user 6 Subchannel has receive multiple from user 7 Subchannel has buffer not available condition 8 Subchannel reason for no buffer (0=no credit; 1=no buffers) 9 Subchannel has network level doing flow control 10 Subchannel has pending connect 11 Subchannel has transmitted disconnect 12 Subchannel ignores buffer not available condition 13 Subchannel support Bus0 if not set, Bus1 if set 14 Subchannel has possible error during data transfer 15 Subchannel is allocated
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntsctState 1.3.6.1.4.1.333.1.14.2.1.4.1.6
Bit value for the subchannel state. Bit Definition 0 Wait flag 1 Subchannel busy 2 Pending command retry 3 Pending completion status 4 Pending unsolicited status 6 Status stacked 7 Damage control active flag
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntsctRxCredit 1.3.6.1.4.1.333.1.14.2.1.4.1.7
Current receive buffer credit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cntsctRxMsgs 1.3.6.1.4.1.333.1.14.2.1.4.1.8
Receive message count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntsctRxMsgBytes 1.3.6.1.4.1.333.1.14.2.1.4.1.9
Receive message byte count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntsctRxDataBytes 1.3.6.1.4.1.333.1.14.2.1.4.1.10
Receive data byte count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntsctTxMsgs 1.3.6.1.4.1.333.1.14.2.1.4.1.11
Transmit message count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntsctTxMsgBytes 1.3.6.1.4.1.333.1.14.2.1.4.1.12
Transmit message byte count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntsctTxDataBytes 1.3.6.1.4.1.333.1.14.2.1.4.1.13
Transmit data byte count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntsctTxErrMsgs 1.3.6.1.4.1.333.1.14.2.1.4.1.14
Transmit error message count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntsctTotalBytes 1.3.6.1.4.1.333.1.14.2.1.4.1.15
Total number of bytes transmitted and received for this subchannel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cntsctDrecPid 1.3.6.1.4.1.333.1.14.2.1.4.1.16
Channel PID name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntsctDrecTask 1.3.6.1.4.1.333.1.14.2.1.4.1.17
Device specific driver task name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cntInformationalMsg 1
A cnt level one trap signifies that an event has occured that is informational in severity. The network will not be affected by this error.
TRAP-TYPE    

cntPossibleErrMsg 2
A cnt level two trap signifies that an event has occured that is possibly severe in nature. The scope of this failure is dependent on the network design.
TRAP-TYPE    

cntSevereErrMsg 3
A cnt level three trap signifies that an event has occured that is unrecoverable. Some aspect of the CNT network will not function as expected. Related aspects may also be affected.
TRAP-TYPE    

cntCriticalErrMsg 4
A cnt level four trap signifies that an event has occured that is critical and possibly fatal. Some aspect of the cnt network will not function or is seriously impaired. This failure will likely affect related functions as well.
TRAP-TYPE