CNT251-MIB

File: CNT251-MIB.mib (18395 bytes)

Imported modules

RFC1065-SMI RFC-1212 RFC1213-MIB
CNT25-MIB

Imported symbols

Counter OBJECT-TYPE DisplayString
cnt2CfgSystemProbe

Defined Types

Cnt2SysPowerSupplyEntry  
SEQUENCE    
  cnt2SysPowerSupplyIndex INTEGER
  cnt2SysPowerSupplyPresent INTEGER

Cnt2SysFanEntry  
SEQUENCE    
  cnt2SysFanIndex INTEGER
  cnt2SysFanPresent INTEGER

Cnt2SysAdapterEntry  
SEQUENCE    
  cnt2SysAdapterIndex INTEGER
  cnt2SysAdapterType INTEGER
  cnt2SysAdapterName INTEGER
  cnt2SysAdapterPartNumber INTEGER
  cnt2SysAdapterSerialNumber DisplayString
  cnt2SysAdapterHostId DisplayString
  cnt2SysAdapterBoardRevision DisplayString
  cnt2SysAdapterFirmwareMajorRevision INTEGER
  cnt2SysAdapterFirmwareMinorRevision INTEGER
  cnt2SysAdapterHostName DisplayString
  cnt2SysAdapterOsName DisplayString
  cnt2SysAdapterOsMajorVersion INTEGER
  cnt2SysAdapterOsMinorVersion INTEGER
  cnt2SysAdapterServiceMonitorStatus INTEGER

Cnt2SysBusEntry  
SEQUENCE    
  cnt2SysBusAdapterIndex INTEGER
  cnt2SysBusIndex INTEGER
  cnt2SysBusType INTEGER

Cnt2SysCardEntry  
SEQUENCE    
  cnt2SysCardAdapterIndex INTEGER
  cnt2SysCardBusIndex INTEGER
  cnt2SysCardIndex INTEGER
  cnt2SysCardFunction INTEGER
  cnt2SysCardFirmwareMajorRevision INTEGER
  cnt2SysCardFirmwareMinorRevision INTEGER
  cnt2SysCardVendorOctetString DisplayString
  cnt2SysCardVendorDisplayString DisplayString

Cnt2SysIfEntry  
SEQUENCE    
  cnt2SysIfAdapterIndex INTEGER
  cnt2SysIfBusIndex INTEGER
  cnt2SysIfIndex INTEGER
  cnt2SysIfType INTEGER
  cnt2SysIfCardIndex INTEGER
  cnt2SysIfName DisplayString
  cnt2SysIfConnector INTEGER
  cnt2SysIfSnmpIndex INTEGER

Defined Values

cnt2SysChassisType 1.3.6.1.4.1.333.2.5.1.1
The chassis type for this network node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER slot-2(2), slot-6(6), slot-12(12), osg(13), usg(14), usd6(15), usd12(16), tm(17)  

cnt2SysZachCardType 1.3.6.1.4.1.333.2.5.1.2
TBD.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-present(1), rs232(2)  

cnt2SysHmbFirmwareRevision 1.3.6.1.4.1.333.2.5.1.3
The Hardware Monitor Board (HMB) firmware revision level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysScnrcVersion 1.3.6.1.4.1.333.2.5.1.4
The version of the Lattice chip set on the HMB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysDatPresent 1.3.6.1.4.1.333.2.5.1.5
Indicates whether this node contains a tape drive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

cnt2SysCdRomPresent 1.3.6.1.4.1.333.2.5.1.6
Indicates whether this node contains a CD-ROM drive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

cnt2SysProbeDateTime 1.3.6.1.4.1.333.2.5.1.7
The date and time the system probe file was built/modified. It is a string in the form mm/dd/yy hh:mm:ss local time. hh is expressed as 00-23.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cnt2SysSlotCount 1.3.6.1.4.1.333.2.5.1.8
The number of available slots on this network node of which application processors or i/o processors can occupy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysPowerSupplyTable 1.3.6.1.4.1.333.2.5.1.9
A list of entries ...
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cnt2SysPowerSupplyEntry

cnt2SysPowerSupplyEntry 1.3.6.1.4.1.333.2.5.1.9.1
An individual power supply entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cnt2SysPowerSupplyEntry  

cnt2SysPowerSupplyIndex 1.3.6.1.4.1.333.2.5.1.9.1.1
The relative index for this power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysPowerSupplyPresent 1.3.6.1.4.1.333.2.5.1.9.1.2
An indication if a power supply is in this network node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

cnt2SysFanTable 1.3.6.1.4.1.333.2.5.1.10
A list of entries ...
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cnt2SysFanEntry

cnt2SysFanEntry 1.3.6.1.4.1.333.2.5.1.10.1
An individual power supply fan entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cnt2SysFanEntry  

cnt2SysFanIndex 1.3.6.1.4.1.333.2.5.1.10.1.1
The relative index for this power supply fan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysFanPresent 1.3.6.1.4.1.333.2.5.1.10.1.2
An indication if a power supply fan is operational in this network node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

cnt2SysAdapterTable 1.3.6.1.4.1.333.2.5.1.11
A list of entries ...
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cnt2SysAdapterEntry

cnt2SysAdapterEntry 1.3.6.1.4.1.333.2.5.1.11.1
An individual adapter entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cnt2SysAdapterEntry  

cnt2SysAdapterIndex 1.3.6.1.4.1.333.2.5.1.11.1.1
The relative index for this adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysAdapterType 1.3.6.1.4.1.333.2.5.1.11.1.2
the type of adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), absent(2), sparc(3), escon(4), ppc(5)  

cnt2SysAdapterName 1.3.6.1.4.1.333.2.5.1.11.1.3
the name of the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER absent(1), unknown(2), zsp1(3), zen1(4), zap1(5), zsp2(6), zen2(7), zap2(8), zen3(9), usg1(10), usg2(11), zap3(12), zap4(13), zen4(14), o1x1(15)  

cnt2SysAdapterPartNumber 1.3.6.1.4.1.333.2.5.1.11.1.4
The part number of the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysAdapterSerialNumber 1.3.6.1.4.1.333.2.5.1.11.1.5
The serial number of the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cnt2SysAdapterHostId 1.3.6.1.4.1.333.2.5.1.11.1.6
Any host identifier assigned by the operating system vendor. For example, Solaris uses a host identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cnt2SysAdapterBoardRevision 1.3.6.1.4.1.333.2.5.1.11.1.7
The board revision of the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cnt2SysAdapterFirmwareMajorRevision 1.3.6.1.4.1.333.2.5.1.11.1.8
The major revision of the firmware on the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysAdapterFirmwareMinorRevision 1.3.6.1.4.1.333.2.5.1.11.1.9
The minor revision of the firmware on the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysAdapterHostName 1.3.6.1.4.1.333.2.5.1.11.1.10
The node name of the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cnt2SysAdapterOsName 1.3.6.1.4.1.333.2.5.1.11.1.11
The operating system name running on the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cnt2SysAdapterOsMajorVersion 1.3.6.1.4.1.333.2.5.1.11.1.12
The operating system major version running on the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysAdapterOsMinorVersion 1.3.6.1.4.1.333.2.5.1.11.1.13
The operating system minor version running on the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysAdapterServiceMonitorStatus 1.3.6.1.4.1.333.2.5.1.11.1.14
Indicates the status of the Service Monitor software for the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), primary(2), secondary(3)  

cnt2SysBusTable 1.3.6.1.4.1.333.2.5.1.12
A list of entries ...
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cnt2SysBusEntry

cnt2SysBusEntry 1.3.6.1.4.1.333.2.5.1.12.1
An individual bus entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cnt2SysBusEntry  

cnt2SysBusAdapterIndex 1.3.6.1.4.1.333.2.5.1.12.1.1
The same as cnt2SysAdapterIndex: the relative index for this adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysBusIndex 1.3.6.1.4.1.333.2.5.1.12.1.2
The relative index for a bus on the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysBusType 1.3.6.1.4.1.333.2.5.1.12.1.3
A type of bus on the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), sbus(2), pci(3), vme(4)  

cnt2SysCardTable 1.3.6.1.4.1.333.2.5.1.13
A list of entries ...
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cnt2SysCardEntry

cnt2SysCardEntry 1.3.6.1.4.1.333.2.5.1.13.1
An individual card entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cnt2SysCardEntry  

cnt2SysCardAdapterIndex 1.3.6.1.4.1.333.2.5.1.13.1.1
The same as cnt2SysAdapterIndex: the relative index for this adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysCardBusIndex 1.3.6.1.4.1.333.2.5.1.13.1.2
The same as cnt2SysBusIndex: the relative index for a bus on this adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysCardIndex 1.3.6.1.4.1.333.2.5.1.13.1.3
The relative index for this card on the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysCardFunction 1.3.6.1.4.1.333.2.5.1.13.1.4
The function of this card for the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), interface(2), compression(3)  

cnt2SysCardFirmwareMajorRevision 1.3.6.1.4.1.333.2.5.1.13.1.5
The major revision of the firmware on the card in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysCardFirmwareMinorRevision 1.3.6.1.4.1.333.2.5.1.13.1.6
The minor revision of the firmware on the card in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysCardVendorOctetString 1.3.6.1.4.1.333.2.5.1.13.1.7
Any octet string used for identification or other purposes that may be readable from the card in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cnt2SysCardVendorDisplayString 1.3.6.1.4.1.333.2.5.1.13.1.8
Any display string used for identification or other purposes that may be readable from the card in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cnt2SysIfTable 1.3.6.1.4.1.333.2.5.1.14
A list of entries ...
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cnt2SysIfEntry

cnt2SysIfEntry 1.3.6.1.4.1.333.2.5.1.14.1
An individual card entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cnt2SysIfEntry  

cnt2SysIfAdapterIndex 1.3.6.1.4.1.333.2.5.1.14.1.1
The same as cnt2SysAdapterIndex: the relative index for this adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysIfBusIndex 1.3.6.1.4.1.333.2.5.1.14.1.2
The same as cnt2SysBusIndex: the relative index for a bus on this adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysIfIndex 1.3.6.1.4.1.333.2.5.1.14.1.3
The relative index for this interface on the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysIfType 1.3.6.1.4.1.333.2.5.1.14.1.4
The type of interface on the adapter in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ethernetCsmacd(2), async(3), escon(4), atm(5), fibreChannel(6), scsi-2(7), scsi-3(8), ds3(9), fddi(10), fastEther(11), isdn(12), gigabitEthernet(13)  

cnt2SysIfCardIndex 1.3.6.1.4.1.333.2.5.1.14.1.5
The card index on which this interface resides. The card index is relative to the bus. If the interface is native to the adapter, this value is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysIfName 1.3.6.1.4.1.333.2.5.1.14.1.6
The adapter-unique name of this interface. It may be the name assigned by the operating system, the name of the device driver, or a description assigned by configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cnt2SysIfConnector 1.3.6.1.4.1.333.2.5.1.14.1.7
The connector type used for this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER absent(1), unknown(2), micro-d15(3), scsi-2(4), scsi-3(5), sc-duplex(6), rj45(7), bnc(8), hssdc(9), rsd-duplex(10)  

cnt2SysIfSnmpIndex 1.3.6.1.4.1.333.2.5.1.14.1.8
The SNMP MIB-2 interface index assigned to this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cnt2SysSerialNumber 1.3.6.1.4.1.333.2.5.1.15
The chassis serial number shown on the tag on the outside of this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cnt2SysOsVersion 1.3.6.1.4.1.333.2.5.1.16
The Software Nucleus OS version of this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString