CL-PKTC-EUE-USER-MIB

File: CL-PKTC-EUE-USER-MIB.mib (28370 bytes)

Imported modules

CL-PKTC-EUE-TC-MIB SNMPv2-SMI SNMPv2-CONF
SNMP-FRAMEWORK-MIB SNMPv2-TC CLAB-DEF-MIB

Imported symbols

PktcEUETCIDType PktcEUETCID PktcEUETCCredsType
PktcEUETCCreds PktcEUETCUsrElementIndexType PktcEUETCUsrAppIndexType
PktcEUETCAppOrgIdentifier PktcEUETCAppIdentifier PktcEUETCActStatus
PktcEUETCActStatusInfo MODULE-IDENTITY OBJECT-TYPE
OBJECT-GROUP MODULE-COMPLIANCE SnmpAdminString
TruthValue RowStatus pktcEUEMibs

Defined Types

PktcEUEUsrIMPUEntry  
SEQUENCE    
  pktcEUEUsrIMPUIndex PktcEUETCUsrElementIndexType
  pktcEUEUsrIMPUIdType PktcEUETCIDType
  pktcEUEUsrIMPUId PktcEUETCID
  pktcEUEUsrIMPUIMPIIndexRef PktcEUETCUsrElementIndexType
  pktcEUEUsrIMPUDispInfo SnmpAdminString
  pktcEUEUsrIMPUOpIndexRefs SnmpAdminString
  pktcEUEUsrIMPUNWActStat PktcEUETCActStatus
  pktcEUEUsrIMPUNWActStatInfo SnmpAdminString
  pktcEUEUsrIMPUUEActStat PktcEUETCActStatus
  pktcEUEUsrIMPUUEActStatInfo SnmpAdminString
  pktcEUEUsrIMPUSigSecurity TruthValue
  pktcEUEUsrIMPUAdditionalInfo SnmpAdminString
  pktcEUEUsrIMPURowStatus RowStatus

PktcEUEUsrIMPIEntry  
SEQUENCE    
  pktcEUEUsrIMPIIndex PktcEUETCUsrElementIndexType
  pktcEUEUsrIMPIIdType PktcEUETCIDType
  pktcEUEUsrIMPIId PktcEUETCID
  pktcEUEUsrIMPICredsType PktcEUETCCredsType
  pktcEUEUsrIMPICredentials PktcEUETCCreds
  pktcEUEUsrIMPIRowStatus RowStatus

PktcEUEUsrAppMapEntry  
SEQUENCE    
  pktcEUEUsrAppMapAppIndex PktcEUETCUsrAppIndexType
  pktcEUEUsrAppMapAppOrgID PktcEUETCAppOrgIdentifier
  pktcEUEUsrAppMapAppIdentifier PktcEUETCAppIdentifier
  pktcEUEUsrAppMapAppIndexRef PktcEUETCUsrAppIndexType
  pktcEUEUsrAppMapAppNWActStat PktcEUETCActStatus
  pktcEUEUsrAppMapAppNWActStatInfo PktcEUETCActStatusInfo
  pktcEUEUsrAppMapAppUEActStat PktcEUETCActStatus
  pktcEUEUsrAppMapAppUEActStatInfo PktcEUETCActStatusInfo
  pktcEUEUsrAppMapRowStatus RowStatus

Defined Values

pktcEUEUserMIB 1.3.6.1.4.1.4491.2.2.10.3
This MIB module contains configuration MIB objects for the PacketCable Users as required by the PacketCable E-UE Provisioning Framework.
MODULE-IDENTITY    

pktcEUEUsrNotification 1.3.6.1.4.1.4491.2.2.10.3.0
OBJECT IDENTIFIER    

pktcEUEUsrObjects 1.3.6.1.4.1.4491.2.2.10.3.1
OBJECT IDENTIFIER    

pktcEUEUsrConformance 1.3.6.1.4.1.4491.2.2.10.3.2
OBJECT IDENTIFIER    

pktcEUEUsrCompliances 1.3.6.1.4.1.4491.2.2.10.3.2.1
OBJECT IDENTIFIER    

pktcEUEUsrGroups 1.3.6.1.4.1.4491.2.2.10.3.2.2
OBJECT IDENTIFIER    

pktcEUEUsrProfile 1.3.6.1.4.1.4491.2.2.10.3.1.1
OBJECT IDENTIFIER    

pktcEUEUsrProfileVersion 1.3.6.1.4.1.4491.2.2.10.3.1.1.1
This MIB Object represents the User Profile Version for this MIB module. The eUE MUST set this MIB Object to value of '1.0'.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..6)  

pktcEUEUsrIMPUTable 1.3.6.1.4.1.4491.2.2.10.3.1.1.2
This data table represents Users associated with the eUE. Specifically it provides information related to the IM Public Identity (IMPU) of the User.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PktcEUEUsrIMPUEntry

pktcEUEUsrIMPUEntry 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1
Each entry in this data table describes an association of a user IMPU with the eUE, indexed by a IMPU Identifier. The eUE uses the entries in this table to register the user in a PacketCable Network, provided they are enabled. The credentials for registration are obtained using the association with an IMPI in the MIB table pktcEUEUsrIMPITable, referenced via the MIB Object pktcEUEUsrIMPIIndexRef. The eUE MAY store pre-configured associations in NVRAM.
Status: current Access: not-accessible
OBJECT-TYPE    
  PktcEUEUsrIMPUEntry  

pktcEUEUsrIMPUIndex 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1.1
This MIB Object provides a user IMPU index. When the user IMPU is referenced elsewhere, such as to associate the device and a user IMPU, this MIB Object MUST be used as an index reference. A value of '0' MUST NOT be used.
Status: current Access: not-accessible
OBJECT-TYPE    
  PktcEUETCUsrElementIndexType  

pktcEUEUsrIMPUIdType 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1.2
This MIB Object MUST indicate the 'Identifier type' of the data value contained in 'pktcEUEUsrIMPUId'. Valid types include other(1), publicIdentity(2) and username(6).
Status: current Access: read-create
OBJECT-TYPE    
  PktcEUETCIDType  

pktcEUEUsrIMPUId 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1.3
This MIB Object MUST identify the User IMPU being associated with the eUE. The type of Identifier is indicated by the MIB Object 'pktcEUEUsrIMPUIdType'.
Status: current Access: read-create
OBJECT-TYPE    
  PktcEUETCID  

pktcEUEUsrIMPUIMPIIndexRef 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1.4
This MIB Object MUST provide an index reference to a IMPI associated with the corresponding IMPU specified in this table entry. The index reference points to an entry in the MIB table 'pktcEUEUsrIMPITable'. If this contains a value of '0', it indicates that the user IMPU is not yet associated with an IMPI and cannot be used in networks requiring authentication.
Status: current Access: read-create
OBJECT-TYPE    
  PktcEUETCUsrElementIndexType  

pktcEUEUsrIMPUDispInfo 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1.5
This optional MIB Object MAY contain human readable text describing User characteristics. Examples include User Display Name, Subscriber Identifier etc.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString  

pktcEUEUsrIMPUOpIndexRefs 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1.6
This optional MIB Object MAY contain a list of comma separated Operator domain entries where the user specified in this entry 'pktcEUEUsrIMPUId' can be used. The entries MUST be index references to the operator table associated with the eUE. The eUE MAY attempt to use the user entry in a domain or sub-domain specified by the operator table, corresponding to the entries listed here. The eUE MUST NOT attempt to use the user entry in a domain that is not specified by this entry. If unspecified, the eUE MUST use the domain identified by the IMPU.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString  

pktcEUEUsrIMPUNWActStat 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1.7
This MIB Object contains the eUE activation status as determined by the network. The eUE MUST allow access to the User identified in 'pktcEUEUsrIMPUId' if the value is set to true(1), unless determined otherwise and reported in pktcEUEUsrIMPUUEActStat. The eUE SHOULD attempt to register a User identified in 'pktcEUEUsrIMPUId' if the value is set to true(1). PacketCable Applications can specify additional requirements for registration. The eUE MUST disallow access to the User identified in 'pktcEUEUsrIMPUId' if the value is set to false(2)
Status: current Access: read-create
OBJECT-TYPE    
  PktcEUETCActStatus  

pktcEUEUsrIMPUNWActStatInfo 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1.8
This MIB Object MAY contain information that describes the activation status indicated in 'pktcEUEIMPUNWActStat'. For example 'User temporarily deactivated for maintenance'.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString  

pktcEUEUsrIMPUUEActStat 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1.9
This MIB Object contains the eUE activation status as determined by the UE. The eUE MUST allow access to the User identified in 'pktcEUEUsrIMPUId' if the value is set to true(1). The eUE SHOULD attempt to register a User identified in 'pktcEUEUsrIMPUId' if the value is set to true(1). PacketCable Applications can specify additional requirements for registration. The eUE MUST disallow access to the User identified in 'pktcEUEUsrIMPUId' if the value is set to false(2).
Status: current Access: read-only
OBJECT-TYPE    
  PktcEUETCActStatus  

pktcEUEUsrIMPUUEActStatInfo 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1.10
This MIB Object MAY contain information that describes the activation status indicated in 'pktcEUEUsrIMPUUEActStat'. For example 'User deactivated based on user interface input.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

pktcEUEUsrIMPUSigSecurity 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1.11
This element indicates the network requirement for SIP signaling with the P-CSCF. If set to 'true', the User SHOULD use secure SIP signaling with the P-CSCF. If set to 'false', the User MAY communicate without a secure SIP communication channel with the P-CSCF. If the actual status of the communication channel differs from the value of this element, the UE MUST report the discrepancy, on behalf of the User, using the Management Data Element error reporting mechanism'.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

pktcEUEUsrIMPUAdditionalInfo 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1.12
This MIB Object MAY contain information that describes additional information defined by PacketCable specifications, including those defining PacketCable features. PacketCable specifications are expected to use this data element to obtain additional information. To specify such additional info, the following rules apply: - Each specification planning to use this MIB Object MUST specify data in the following format: '#', # being the delimiter e.g. FEATURE-X#ABC FEATURE-Y# - This MIB Object MUST be a semi-colon separated concatenation of such '#' pairs. e.g. FEATURE-X#ABC;FEATURE-Z#DEF - Since the '#' and ';' characters are used as delimiters, they SHOULD not be specified in the keyword. If specified, any occurence of these characters in the value field MUST be preceded by the escape character '\' (e.g. FEATURE-X#A\#C). Occurences of '\' MUST be preceded by itself (e.g. . (e.g. FEATURE-X#A\C\#). The following rules apply on the eUE: - The eUE MUST first separate all the keyword value pairs, using a '#' that is not preceded by '\' as the delimiter - The eUE MUST, For all recognized keywords, decipher the value by interpreting the data after considering the use of '\' as defined in this definition - The eUE MUST ignore and report all unrecognized keywords using PacketCable Management
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString  

pktcEUEUsrIMPURowStatus 1.3.6.1.4.1.4491.2.2.10.3.1.1.2.1.13
This MIB Object defines the row status associated with this particular User in the pktcEUEUsrIMPUTable. An entry in this table is not qualified for activation until the object instances of all corresponding columns have been initialized, either by default values or via explicit SET operations. Until all object instances in this row are initialized, the status value for this realm must be 'notReady(3)'. In particular, two columnar objects must be SET: the 'pktcEUEUsrIMPUIMPUIdType' and the 'pktcEUEUsrIMPUIMPUId. Once these two objects have been set the row status may be SET to 'active(1)' The eUE MUST not allow these two objects to be changed while the row is 'active'. The value of this object has no effect on whether other columnar objects in this row can be modified.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pktcEUEUsrIMPITable 1.3.6.1.4.1.4491.2.2.10.3.1.1.3
This data table contains the user IMPI information associated with users provisioned on the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PktcEUEUsrIMPIEntry

pktcEUEUsrIMPIEntry 1.3.6.1.4.1.4491.2.2.10.3.1.1.3.1
Each entry in this data table contains an instance of a user IMPI and associated credentials. Each IMPU provisioned in the eUE SHOULD be associated with an entry in this table. The exception is in networks where certain users are unauthenticated for application access.
Status: current Access: not-accessible
OBJECT-TYPE    
  PktcEUEUsrIMPIEntry  

pktcEUEUsrIMPIIndex 1.3.6.1.4.1.4491.2.2.10.3.1.1.3.1.1
This MIB Object provides a user IMPI index. When the user IMPI is referenced elsewhere, such as to associate the IMPU and an IMPI, this MIB Object MUST be used as an index reference. A value of '0' MUST NOT be used.
Status: current Access: not-accessible
OBJECT-TYPE    
  PktcEUETCUsrElementIndexType  

pktcEUEUsrIMPIIdType 1.3.6.1.4.1.4491.2.2.10.3.1.1.3.1.2
This MIB Object MUST indicate the 'Identifier type' of the data value contained in 'pktcEUEUsrIMPIId'. Valid types include other(1), privateIdentity(2) and username(6).
Status: current Access: read-create
OBJECT-TYPE    
  PktcEUETCIDType  

pktcEUEUsrIMPIId 1.3.6.1.4.1.4491.2.2.10.3.1.1.3.1.3
This MIB Object MUST identify a User IMPI being specified in this table. The type of Identifier is indicated by the MIB Object 'pktcEUEUsrIMPIIdType'.
Status: current Access: read-create
OBJECT-TYPE    
  PktcEUETCID  

pktcEUEUsrIMPICredsType 1.3.6.1.4.1.4491.2.2.10.3.1.1.3.1.4
This MIB Object contains the type of credentials contained in the MIB Object 'pktcEUEUsrIMPICredentials'. Valid types include other(1), privateIdentity(2) and username(6).
Status: current Access: read-create
OBJECT-TYPE    
  PktcEUETCCredsType  

pktcEUEUsrIMPICredentials 1.3.6.1.4.1.4491.2.2.10.3.1.1.3.1.5
This MIB Object allows the Operator to configure credentials associated with an IMPI. This value is used with, and must be consistent with, the value of the associated 'pktcEUEUsrIMPIedsType' object. If read this MIB Object MUST always return an empty string value for privacy reasons. A Operator SHOULD provide this MIB Object only over a secured configuration interface to avoid security threats due to compromised credentials.
Status: current Access: read-create
OBJECT-TYPE    
  PktcEUETCCreds  

pktcEUEUsrIMPIRowStatus 1.3.6.1.4.1.4491.2.2.10.3.1.1.3.1.6
This MIB Object defines the row status associated with this entry. The value of the 'pktcEUEUsrIMPICredsType' object MUST NOT be modified while this object is 'active'. The value of 'pktcEUEUsrIMPICredentials' MAY be modified while this object is active if the value is consistent with the type specifed by the 'pktcEUEUsrIMPICredsType' object.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pktcEUEUsrAppMapTable 1.3.6.1.4.1.4491.2.2.10.3.1.1.4
This data table represents Apps associated with a User IMPU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PktcEUEUsrAppMapEntry

pktcEUEUsrAppMapEntry 1.3.6.1.4.1.4491.2.2.10.3.1.1.4.1
Each entry in this data table identifies an application associated with the user, the application profile index reference, the network status and UE status information
Status: current Access: not-accessible
OBJECT-TYPE    
  PktcEUEUsrAppMapEntry  

pktcEUEUsrAppMapAppIndex 1.3.6.1.4.1.4491.2.2.10.3.1.1.4.1.1
This MIB Object represents an index to map an Application instance associated with the User IMPU.
Status: current Access: not-accessible
OBJECT-TYPE    
  PktcEUETCUsrAppIndexType  

pktcEUEUsrAppMapAppOrgID 1.3.6.1.4.1.4491.2.2.10.3.1.1.4.1.2
This MIB Object identifies the Organization specifying the app identifier contained in the MIB Object 'pktcEUEUsrAppMapAppIdentifier'.
Status: current Access: read-create
OBJECT-TYPE    
  PktcEUETCAppOrgIdentifier  

pktcEUEUsrAppMapAppIdentifier 1.3.6.1.4.1.4491.2.2.10.3.1.1.4.1.3
This MIB Object represents the identifier for a Application associated with the User. The application identifier MUST represent an application specified by the organization specified in 'pktcEUEUsrAppMapAppOrgID'.
Status: current Access: read-create
OBJECT-TYPE    
  PktcEUETCAppIdentifier  

pktcEUEUsrAppMapAppIndexRef 1.3.6.1.4.1.4491.2.2.10.3.1.1.4.1.4
This MIB Object represents the index reference to an application profile for the application identified by the MIB Object 'pktcEUEUsrAppMapAppIDentifier'. If this value is set to a value of '0' then the following conditions apply: - If the application has no specific configuration data, the network activation status MUST be considered by the eUE - If the application has configuration data elements the eUE MUST deactivate the application and ignore the network activation status. The deactivation is accomplished using the MIB Object 'pktcEUEUsrAppMapAppUEActStat'.
Status: current Access: read-create
OBJECT-TYPE    
  PktcEUETCUsrAppIndexType  

pktcEUEUsrAppMapAppNWActStat 1.3.6.1.4.1.4491.2.2.10.3.1.1.4.1.5
This MIB Object represents the network activation status for the application specified in 'pktcEUEUsrAppMapAppOrgID'.
Status: current Access: read-create
OBJECT-TYPE    
  PktcEUETCActStatus  

pktcEUEUsrAppMapAppNWActStatInfo 1.3.6.1.4.1.4491.2.2.10.3.1.1.4.1.6
This MIB Object represents additional information for the status information represented by 'pktcEUEUsrAppMapAppNWActStat'.
Status: current Access: read-create
OBJECT-TYPE    
  PktcEUETCActStatusInfo  

pktcEUEUsrAppMapAppUEActStat 1.3.6.1.4.1.4491.2.2.10.3.1.1.4.1.7
This MIB Object represents the UE activation status for the application specified in 'pktcEUEUsrAppMapAppOrgID'.
Status: current Access: read-only
OBJECT-TYPE    
  PktcEUETCActStatus  

pktcEUEUsrAppMapAppUEActStatInfo 1.3.6.1.4.1.4491.2.2.10.3.1.1.4.1.8
This MIB Object represents additional information for the status information represented by 'pktcEUEUsrAppMapAppUEActStat'. For example 'UE does not support this application.'
Status: current Access: read-only
OBJECT-TYPE    
  PktcEUETCActStatusInfo  

pktcEUEUsrAppMapRowStatus 1.3.6.1.4.1.4491.2.2.10.3.1.1.4.1.9
This MIB Object defines the row status associated with this particular User in the pktcEUEUsrAppMapTable. An entry in this table is not qualified for activation until the object instances of all corresponding columns have been initialized, either by default values or via explicit SET operations. Until all object instances in this row are initialized, the status value for this realm must be 'notReady(3)'. In particular, two columnar objects must be SET: the 'pktcEUEUsrAppMapAppOrgID' and 'pktcEUEUsrAppMapAppIdentifier. Once these two objects have been set the row status may be SET to 'active(1)'. The eUE MUST not allow these two objects to be changed while the row is 'active'. The value of this object has no effect on whether other columnar objects in this row can be modified.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pktcEUEUsrMIBCompliances 1.3.6.1.4.1.4491.2.2.10.3.2.1
OBJECT IDENTIFIER    

pktcEUEUsrMIBGroups 1.3.6.1.4.1.4491.2.2.10.3.2.2
OBJECT IDENTIFIER    

pktcEUEUsrMIBCompliance 1.3.6.1.4.1.4491.2.2.10.3.2.1.1
The compliance statement for implementations of the User Mib
Status: current Access: read-create
MODULE-COMPLIANCE    

pktcEUEUsrProfileGroup 1.3.6.1.4.1.4491.2.2.10.3.2.2.1
The eUE Usr Profile Group.
Status: current Access: read-create
OBJECT-GROUP    

pktcEUEUsrIMPUGroup 1.3.6.1.4.1.4491.2.2.10.3.2.1.2
The user IMPU Group.
Status: current Access: read-create
OBJECT-GROUP    

pktcEUEUsrIMPIGroup 1.3.6.1.4.1.4491.2.2.10.3.2.1.3
The user IMPI Group.
Status: current Access: read-create
OBJECT-GROUP    

pktcEUEUsrAppMapGroup 1.3.6.1.4.1.4491.2.2.10.3.2.1.4
The User to Applications Mapping Group.
Status: current Access: read-create
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor