CISCOSB-TUNNEL-MIB

File: CISCOSB-TUNNEL-MIB.mib (11332 bytes)

Imported modules

CISCOSB-MIB SNMPv2-SMI SNMPv2-TC
IANAifType-MIB DNS-SERVER-MIB TUNNEL-MIB
IF-MIB

Imported symbols

switch001 OBJECT-TYPE Unsigned32
IpAddress MODULE-IDENTITY RowStatus
IANAtunnelType DnsName tunnelIfEntry
ifIndex

Defined Types

RlTunnelIfEntry  
SEQUENCE    
  rlTunnelIfEncapsMethod IANAtunnelType
  rlTunnelIfLocalAddressSource INTEGER
  rlTunnelIfLocalAddressInterfaceId Unsigned32
  rlTunnelIfLocalIPv4Address IpAddress
  rlTunnelIfStatus RowStatus

RlTunnelIsatapConfEntry  
SEQUENCE    
  rlTunnelIsatapConfDnsName OCTET STRING
  rlTunnelIsatapConfRowStatus RowStatus

RlTunnelIsatapPrlEntry  
SEQUENCE    
  rlTunnelIsatapPrlIfIndex Unsigned32
  rlTunnelIsatapPrlPriority Unsigned32
  rlTunnelIsatapPrlAddress IpAddress
  rlTunnelIsatapPrlIsActive INTEGER

Defined Values

rlTunnel 1.3.6.1.4.1.9.6.1.101.122
The private MIB module definition for Tunneling.
MODULE-IDENTITY    

rlTunnelIsatapStatus 1.3.6.1.4.1.9.6.1.101.122.1
The ISATAP status.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rlTunnelIsatapRobustness 1.3.6.1.4.1.9.6.1.101.122.2
specifies how many DNS Querys and Router Solicitations should be sent to get the corresponding reply.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Unsigned32 1..20  

rlTunnelIsatapDnsHostName 1.3.6.1.4.1.9.6.1.101.122.3
The domain name for ISATAP.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DnsName  

rlTunnelIsatapQueryInterval 1.3.6.1.4.1.9.6.1.101.122.4
specifies the time interval between sending of DNS Queries before receiving the first reply from the DNS Server.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Unsigned32 10..3600  

rlTunnelIsatapRSInterval 1.3.6.1.4.1.9.6.1.101.122.5
specifies the time interval between sending of Router Solicitations before receiving the first reply from the ISATAP Router.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Unsigned32 10..3600  

rlTunnelIsatapMinQueryInterval 1.3.6.1.4.1.9.6.1.101.122.6
specifies the minimum time interval between between successive queries of same advertising ISATAP interface.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32 0..3600  

rlTunnelIsatapMinRSInterval 1.3.6.1.4.1.9.6.1.101.122.7
specifies the minimum time between successive solicitations of the same advertising ISATAP interface.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32 0..3600  

rlTunnelIsatapRouterAddress 1.3.6.1.4.1.9.6.1.101.122.8
specifies the IPv4 address of ISATAP Router.
Status: deprecated Access: read-only
OBJECT-TYPE    
  IpAddress  

rlTunnelIsatapLocalIPv4Address 1.3.6.1.4.1.9.6.1.101.122.9
specifies the IPv4 address currently used as IPv4 source address for ISATAP Tunnel.
Status: deprecated Access: read-only
OBJECT-TYPE    
  IpAddress  

rlTunnelGeneral 1.3.6.1.4.1.9.6.1.101.122.11
OBJECT IDENTIFIER    

rlTunnelIfTable 1.3.6.1.4.1.9.6.1.101.122.11.1
This table is parallel to tunnelIfTable, and is used to add/delete tunnel entries to/from that table. In addition it contains private objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlTunnelIfEntry

rlTunnelIfEntry 1.3.6.1.4.1.9.6.1.101.122.11.1.1
Additional configuration parameters for a tunnel interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlTunnelIfEntry  

rlTunnelIfEncapsMethod 1.3.6.1.4.1.9.6.1.101.122.11.1.1.1
The encapsulation method used by the tunnel. This field added since it is read-only in standard MIB.
Status: current Access: read-write
OBJECT-TYPE    
  IANAtunnelType  

rlTunnelIfLocalAddressSource 1.3.6.1.4.1.9.6.1.101.122.11.1.1.2
Defines the method of obtaining Local address for the tunnel interface. Configured - configured by user. Automatic - minimum IP address of the device. Interface - minimum IP address on user specified interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER configured(1), auto(2), interface(3)  

rlTunnelIfLocalAddressInterfaceId 1.3.6.1.4.1.9.6.1.101.122.11.1.1.3
Interface ID, used to determine Local address for tunnel interface if rlTunnelIfLocalAddressSource set to interface.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

rlTunnelIfLocalIPv4Address 1.3.6.1.4.1.9.6.1.101.122.11.1.1.4
Specifies the IPv4 address currently used as IPv4 Local address for IPv6 over IPv4 Tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlTunnelIfStatus 1.3.6.1.4.1.9.6.1.101.122.11.1.1.5
The status of this row, by which new entries may be created, or old entries deleted from this table.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rlTunnelTypeSpecific 1.3.6.1.4.1.9.6.1.101.122.12
OBJECT IDENTIFIER    

rlTunnelIsatap 1.3.6.1.4.1.9.6.1.101.122.12.1
OBJECT IDENTIFIER    

rlTunnelIsatapConfTable 1.3.6.1.4.1.9.6.1.101.122.12.1.1
This table contains ISATAP-specific configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlTunnelIsatapConfEntry

rlTunnelIsatapConfEntry 1.3.6.1.4.1.9.6.1.101.122.12.1.1.1
Additional configuration parameters for a tunnel interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlTunnelIsatapConfEntry  

rlTunnelIsatapConfDnsName 1.3.6.1.4.1.9.6.1.101.122.12.1.1.1.1
DNS name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

rlTunnelIsatapConfRowStatus 1.3.6.1.4.1.9.6.1.101.122.12.1.1.1.2
The status of this row, by which new entries may be created, or old entries deleted from this table.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

rlTunnelIsatapPrlTable 1.3.6.1.4.1.9.6.1.101.122.12.1.2
This table contains ISATAP-specific configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlTunnelIsatapPrlEntry

rlTunnelIsatapPrlEntry 1.3.6.1.4.1.9.6.1.101.122.12.1.2.1
Additional configuration parameters for a tunnel interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  RlTunnelIsatapPrlEntry  

rlTunnelIsatapPrlIfIndex 1.3.6.1.4.1.9.6.1.101.122.12.1.2.1.1
The index of the interface to which this PRL entry belongs.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rlTunnelIsatapPrlPriority 1.3.6.1.4.1.9.6.1.101.122.12.1.2.1.2
The priority of the entry. Lower value - higher priority.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rlTunnelIsatapPrlAddress 1.3.6.1.4.1.9.6.1.101.122.12.1.2.1.3
IPv4 address of the potential router.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rlTunnelIsatapPrlIsActive 1.3.6.1.4.1.9.6.1.101.122.12.1.2.1.4
Whether the PRL entry is active (meaning it has an up to date RA).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

rlTunnelIsatapConfRSInterval 1.3.6.1.4.1.9.6.1.101.122.12.1.11
Specifies the time interval between Router Solicitations prior to receiving the first reply from the ISATAP router.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..3600  

rlTunnelIsatapConfRobustness 1.3.6.1.4.1.9.6.1.101.122.12.1.12
After a Router Advertisement was received, Router Solicitation messages are sent every Lifetime / (1 + Robustness) seconds, where Lifetime is the Lifetime advertised in the RA.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..20  

rlTunnelIPv6EndConfig 1.3.6.1.4.1.9.6.1.101.122.12.2
Used to indicate end of snmp configuration for IPv6. Can be removed, if mechanism for indicating end config per mib is added to SNMP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor