CISCOSB-COPY-MIB

File: CISCOSB-COPY-MIB.mib (36770 bytes)

Imported modules

CISCOSB-MIB	CISCOSB-DEVICEPARAMS-MIB	SNMPv2-SMI
SNMPv2-TC	INET-ADDRESS-MIB	CISCOSB-SECSD-MIB

Imported symbols

switch001	rndNotifications	rndErrorDesc
rndErrorSeverity	OBJECT-TYPE	IpAddress
Unsigned32	Counter32	TimeTicks
MODULE-IDENTITY	NOTIFICATION-TYPE	DisplayString
TEXTUAL-CONVENTION	TruthValue	RowStatus
InetAddressType	InetAddress	RlSecSdAccessType

Defined Types

RlCopyApplicationType
Specifies management application
TEXTUAL-CONVENTION
	INTEGER	mcli(1), cli(2), ewb(3), nms(4), initerm(5), serial(6)

RlCopyLocationType
Specifies file location
TEXTUAL-CONVENTION
	INTEGER	local(1), anotherUnit(2), tftp(3), xmodem(4), scp(5), serial(6), http(7), https(8), http-xml(9), https-xml(10)

RlCopyFileType
The File type
TEXTUAL-CONVENTION
	INTEGER	other(1), runningConfig(2), startupConfig(3), backupConfig(4), runningMibConfig(5), startupMibConfig(6), backupMibConfig(7), image(8), boot(9), null(10), logging(11), mirrorConfig(12), usb(13)

RlCopySecSdAccessType
Sec sd access type
TEXTUAL-CONVENTION
	INTEGER	exclude(1), include-encrypted(2), include-decrypted(3), default(4)

RlCopyEntry
SEQUENCE
	rlCopyIndex	INTEGER
	rlCopyApplicationId	RlCopyApplicationType
	rlCopySourceLocation	RlCopyLocationType
	rlCopySourceIpAddress	IpAddress
	rlCopySourceUnitNumber	INTEGER
	rlCopySourceFileName	DisplayString
	rlCopySourceFileType	RlCopyFileType
	rlCopyDestinationLocation	RlCopyLocationType
	rlCopyDestinationIpAddress	IpAddress
	rlCopyDestinationUnitNumber	INTEGER
	rlCopyDestinationFileName	DisplayString
	rlCopyDestinationFileType	RlCopyFileType
	rlCopyUpTime	TimeTicks
	rlCopyOperationState	INTEGER
	rlCopyBytesTransferred	INTEGER
	rlCopyInBackground	INTEGER
	rlCopyRowStatus	RowStatus
	rlCopyHistoryIndex	INTEGER

RlCopyHistoryEntry
SEQUENCE
	rlCopyHistoryHistoryIndex	INTEGER
	rlCopyHistoryApplicationId	RlCopyApplicationType
	rlCopyHistorySourceLocation	RlCopyLocationType
	rlCopyHistorySourceIpAddress	IpAddress
	rlCopyHistorySourceUnitNumber	INTEGER
	rlCopyHistorySourceFileName	DisplayString
	rlCopyHistorySourceFileType	RlCopyFileType
	rlCopyHistoryDestinationLocation	RlCopyLocationType
	rlCopyHistoryDestinationIpAddress	IpAddress
	rlCopyHistoryDestinationUnitNumber	INTEGER
	rlCopyHistoryDestinationFileName	DisplayString
	rlCopyHistoryDestinationFileType	RlCopyFileType
	rlCopyHistoryUpTime	TimeTicks
	rlCopyHistoryOperationState	INTEGER
	rlCopyHistoryBytesTransferred	INTEGER
	rlCopyHistoryInBackground	INTEGER
	rlCopyHistoryRowStatus	RowStatus
	rlCopyHistoryErrorMessage	DisplayString

RlCopyMessagesEntry
SEQUENCE
	rlCopyMessagesCopyIndex	INTEGER
	rlCopyMessagesMessageIndex	INTEGER
	rlCopyMessagesMessageText	DisplayString
	rlCopyMessagesStatus	RowStatus

RlCopyInetEntry
SEQUENCE
	rlCopyInetIndex	INTEGER
	rlCopyInetApplicationId	RlCopyApplicationType
	rlCopyInetSourceLocation	RlCopyLocationType
	rlCopyInetSourceIpAddressType	InetAddressType
	rlCopyInetSourceIpAddress	InetAddress
	rlCopyInetSourceUnitNumber	INTEGER
	rlCopyInetSourceFileName	DisplayString
	rlCopyInetSourceFileType	RlCopyFileType
	rlCopyInetDestinationLocation	RlCopyLocationType
	rlCopyInetDestinationIpAddressType	InetAddressType
	rlCopyInetDestinationIpAddress	InetAddress
	rlCopyInetDestinationUnitNumber	INTEGER
	rlCopyInetDestinationFileName	DisplayString
	rlCopyInetDestinationFileType	RlCopyFileType
	rlCopyInetUpTime	TimeTicks
	rlCopyInetOperationState	INTEGER
	rlCopyInetBytesTransferred	INTEGER
	rlCopyInetInBackground	INTEGER
	rlCopyInetRowStatus	RowStatus
	rlCopyInetHistoryIndex	INTEGER
	rlCopyInetDestinationUnitList	INTEGER
	rlCopyInetUnitStatusList	INTEGER
	rlCopyInetSpecificCopyInfo	DisplayString

RlCopyHistoryInetEntry
SEQUENCE
	rlCopyHistoryInetHistoryIndex	INTEGER
	rlCopyHistoryInetApplicationId	RlCopyApplicationType
	rlCopyHistoryInetSourceLocation	RlCopyLocationType
	rlCopyHistoryInetSourceIpAddressType	InetAddressType
	rlCopyHistoryInetSourceIpAddress	InetAddress
	rlCopyHistoryInetSourceUnitNumber	INTEGER
	rlCopyHistoryInetSourceFileName	DisplayString
	rlCopyHistoryInetSourceFileType	RlCopyFileType
	rlCopyHistoryInetDestinationLocation	RlCopyLocationType
	rlCopyHistoryInetDestinationIpAddressType	InetAddressType
	rlCopyHistoryInetDestinationIpAddress	InetAddress
	rlCopyHistoryInetDestinationUnitNumber	INTEGER
	rlCopyHistoryInetDestinationFileName	DisplayString
	rlCopyHistoryInetDestinationFileType	RlCopyFileType
	rlCopyHistoryInetUpTime	TimeTicks
	rlCopyHistoryInetOperationState	INTEGER
	rlCopyHistoryInetBytesTransferred	INTEGER
	rlCopyHistoryInetInBackground	INTEGER
	rlCopyHistoryInetRowStatus	RowStatus
	rlCopyHistoryInetErrorMessage	DisplayString
	rlCopyHistoryInetDestinationUnitList	INTEGER
	rlCopyHistoryInetUnitStatusList	INTEGER

RlCopyOptionsEntry
SEQUENCE
	rlCopyOptionsIndex	Unsigned32
	rlCopyOptionsRequestedSsdAccess	RlCopySecSdAccessType

Defined Values

rlCopy		1.3.6.1.4.1.9.6.1.101.87
Added field rlCopyInetSpecificCopyInfo
MODULE-IDENTITY

rlCopyMibVersion		1.3.6.1.4.1.9.6.1.101.87.1
Indicates the Copy support version. The current version is 1.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlCopyTable		1.3.6.1.4.1.9.6.1.101.87.2
The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlCopyEntry

rlCopyEntry		1.3.6.1.4.1.9.6.1.101.87.2.1
An entry (conceptual row) in the CopyTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlCopyEntry

rlCopyIndex		1.3.6.1.4.1.9.6.1.101.87.2.1.1
The row index in the table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlCopyApplicationId		1.3.6.1.4.1.9.6.1.101.87.2.1.2
The applicatione activated this comand
Status: current	Access: read-only
OBJECT-TYPE
	RlCopyApplicationType

rlCopySourceLocation		1.3.6.1.4.1.9.6.1.101.87.2.1.3
Source File Location
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyLocationType

rlCopySourceIpAddress		1.3.6.1.4.1.9.6.1.101.87.2.1.4
The Ip address of the source remote host
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

rlCopySourceUnitNumber		1.3.6.1.4.1.9.6.1.101.87.2.1.5
The unit number of the source unit
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopySourceFileName		1.3.6.1.4.1.9.6.1.101.87.2.1.6
The name of the source file.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

rlCopySourceFileType		1.3.6.1.4.1.9.6.1.101.87.2.1.7
The type of the source file.
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyFileType

rlCopyDestinationLocation		1.3.6.1.4.1.9.6.1.101.87.2.1.8
Destination File Location
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyLocationType

rlCopyDestinationIpAddress		1.3.6.1.4.1.9.6.1.101.87.2.1.9
The Ip address of the destination remote host
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

rlCopyDestinationUnitNumber		1.3.6.1.4.1.9.6.1.101.87.2.1.10
The unit number of the destination unit, value 257 means all units
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopyDestinationFileName		1.3.6.1.4.1.9.6.1.101.87.2.1.11
The name of the destination file.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

rlCopyDestinationFileType		1.3.6.1.4.1.9.6.1.101.87.2.1.12
The type of the destination file.
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyFileType

rlCopyUpTime		1.3.6.1.4.1.9.6.1.101.87.2.1.13
The time elapsed since this entry was created.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

rlCopyOperationState		1.3.6.1.4.1.9.6.1.101.87.2.1.14
The state of the copy operation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	uploadInProgress(1), downloadInProgress(2), copyFailed(3), copyTimedout(4), copyFinished(5)

rlCopyBytesTransferred		1.3.6.1.4.1.9.6.1.101.87.2.1.15
The number of bytes that were transferred by the copy operation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlCopyInBackground		1.3.6.1.4.1.9.6.1.101.87.2.1.16
When enabled the copy operation is done in the background.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rlCopyRowStatus		1.3.6.1.4.1.9.6.1.101.87.2.1.17
It is used to insert or delete an entry
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

rlCopyHistoryIndex		1.3.6.1.4.1.9.6.1.101.87.2.1.18
The index of the entry corresponding to this one in the rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex). A value of 0 indicates that no history entry should be kept for this copy operation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopyFreeHistoryIndex		1.3.6.1.4.1.9.6.1.101.87.3
Gives the next free index in the rlCopyHistoryTable (i.e., the next available value for rlCopyHistoryHistoryIndex)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlCopyHistoryTable		1.3.6.1.4.1.9.6.1.101.87.4
The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlCopyHistoryEntry

rlCopyHistoryEntry		1.3.6.1.4.1.9.6.1.101.87.4.1
An entry (conceptual row) in the rlCopyHistoryTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlCopyHistoryEntry

rlCopyHistoryHistoryIndex		1.3.6.1.4.1.9.6.1.101.87.4.1.1
The row index in the table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlCopyHistoryApplicationId		1.3.6.1.4.1.9.6.1.101.87.4.1.2
The application that activated this comand
Status: current	Access: read-only
OBJECT-TYPE
	RlCopyApplicationType

rlCopyHistorySourceLocation		1.3.6.1.4.1.9.6.1.101.87.4.1.3
Source File Location
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyLocationType

rlCopyHistorySourceIpAddress		1.3.6.1.4.1.9.6.1.101.87.4.1.4
The IP address of the source remote host
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

rlCopyHistorySourceUnitNumber		1.3.6.1.4.1.9.6.1.101.87.4.1.5
The unit number of the source unit
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopyHistorySourceFileName		1.3.6.1.4.1.9.6.1.101.87.4.1.6
The name of the source file.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

rlCopyHistorySourceFileType		1.3.6.1.4.1.9.6.1.101.87.4.1.7
The type of the source file.
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyFileType

rlCopyHistoryDestinationLocation		1.3.6.1.4.1.9.6.1.101.87.4.1.8
Destination File Location
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyLocationType

rlCopyHistoryDestinationIpAddress		1.3.6.1.4.1.9.6.1.101.87.4.1.9
The IP address of the destination remote host
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

rlCopyHistoryDestinationUnitNumber		1.3.6.1.4.1.9.6.1.101.87.4.1.10
The unit number of the destination unit
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopyHistoryDestinationFileName		1.3.6.1.4.1.9.6.1.101.87.4.1.11
The name of the destination file.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

rlCopyHistoryDestinationFileType		1.3.6.1.4.1.9.6.1.101.87.4.1.12
The type of the destination file.
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyFileType

rlCopyHistoryUpTime		1.3.6.1.4.1.9.6.1.101.87.4.1.13
The time elapsed since this entry was created.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

rlCopyHistoryOperationState		1.3.6.1.4.1.9.6.1.101.87.4.1.14
The state of the copy operation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	uploadInProgress(1), downloadInProgress(2), copyFailed(3), copyTimedout(4), copyFinished(5)

rlCopyHistoryBytesTransferred		1.3.6.1.4.1.9.6.1.101.87.4.1.15
The number of bytes that were transferred by the copy operation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlCopyHistoryInBackground		1.3.6.1.4.1.9.6.1.101.87.4.1.16
When enabled the copy operation is done in the background.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rlCopyHistoryRowStatus		1.3.6.1.4.1.9.6.1.101.87.4.1.17
It is used delete an entry. No other operations are permitted since the history table is populated and updated through the copy table only.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

rlCopyHistoryErrorMessage		1.3.6.1.4.1.9.6.1.101.87.4.1.18
Error message as a result of failed copy action.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

rlCopyAuditingEnable		1.3.6.1.4.1.9.6.1.101.87.5
Controls whether SysLog messages should be issued on file copy events
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rlCopyMessagesTable		1.3.6.1.4.1.9.6.1.101.87.6
The table listing the messages issued during a COPY operation.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlCopyMessagesEntry

rlCopyMessagesEntry		1.3.6.1.4.1.9.6.1.101.87.6.1
An entry (conceptual row) in the rlCopyMessagesTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlCopyMessagesEntry

rlCopyMessagesCopyIndex		1.3.6.1.4.1.9.6.1.101.87.6.1.1
The index of the copy operation whose messages are displayed.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..2147483647

rlCopyMessagesMessageIndex		1.3.6.1.4.1.9.6.1.101.87.6.1.2
The index of the displayed message.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..2147483647

rlCopyMessagesMessageText		1.3.6.1.4.1.9.6.1.101.87.6.1.3
The text of the message occurred in the copy operation.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

rlCopyMessagesStatus		1.3.6.1.4.1.9.6.1.101.87.6.1.4
Only destroy is supported.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

rlCopyMessagesTableRemoveEntries		1.3.6.1.4.1.9.6.1.101.87.7
Setting this object with value n will remove all entries associated with copy operation represented by the value n from the rlCopyMessagesTable, i.e. all the entries with rlCopyMessagesCopyIndex = n.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopyFinished		1.3.6.1.4.1.9.6.1.101.0.180
Informational trap indicating that the device has finished a copy operation successfully.
Status: current	Access: read-write
NOTIFICATION-TYPE

rlCopyFailed		1.3.6.1.4.1.9.6.1.101.0.181
Informational trap indicating that the copy operation has failed.
Status: current	Access: read-write
NOTIFICATION-TYPE

rlCopySWFinished		1.3.6.1.4.1.9.6.1.101.0.211
A trap indicating that the device has finished a copy operation of image successfully.
Status: current	Access: read-write
NOTIFICATION-TYPE

rlCopySWToUnits		1.3.6.1.4.1.9.6.1.101.0.212
A trap indicating to master unit that remote units have finished a copy operation of image successfully.
Status: current	Access: read-write
NOTIFICATION-TYPE

rlCopyMirrorFileIllegal		1.3.6.1.4.1.9.6.1.101.0.220
A trap indicating that the mirror configuration file is illegal due to failure of prevoius copy operation/s to mirror-config.
Status: current	Access: read-write
NOTIFICATION-TYPE

rlCopyInetTable		1.3.6.1.4.1.9.6.1.101.87.8
The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlCopyInetEntry

rlCopyInetEntry		1.3.6.1.4.1.9.6.1.101.87.8.1
An entry (conceptual row) in the CopyTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlCopyInetEntry

rlCopyInetIndex		1.3.6.1.4.1.9.6.1.101.87.8.1.1
The row index in the table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlCopyInetApplicationId		1.3.6.1.4.1.9.6.1.101.87.8.1.2
The applicatione activated this comand
Status: current	Access: read-only
OBJECT-TYPE
	RlCopyApplicationType

rlCopyInetSourceLocation		1.3.6.1.4.1.9.6.1.101.87.8.1.3
Source File Location
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyLocationType

rlCopyInetSourceIpAddressType		1.3.6.1.4.1.9.6.1.101.87.8.1.4
The Inet address type of the source remote host
Status: current	Access: read-write
OBJECT-TYPE
	InetAddressType

rlCopyInetSourceIpAddress		1.3.6.1.4.1.9.6.1.101.87.8.1.5
The Inet address of the source remote host
Status: current	Access: read-write
OBJECT-TYPE
	InetAddress

rlCopyInetSourceUnitNumber		1.3.6.1.4.1.9.6.1.101.87.8.1.6
The unit number of the source unit
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopyInetSourceFileName		1.3.6.1.4.1.9.6.1.101.87.8.1.7
The name of the source file.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

rlCopyInetSourceFileType		1.3.6.1.4.1.9.6.1.101.87.8.1.8
The type of the source file.
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyFileType

rlCopyInetDestinationLocation		1.3.6.1.4.1.9.6.1.101.87.8.1.9
Destination File Location
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyLocationType

rlCopyInetDestinationIpAddressType		1.3.6.1.4.1.9.6.1.101.87.8.1.10
The Inet address type of the destination remote host
Status: current	Access: read-write
OBJECT-TYPE
	InetAddressType

rlCopyInetDestinationIpAddress		1.3.6.1.4.1.9.6.1.101.87.8.1.11
The Inet address of the destination remote host
Status: current	Access: read-write
OBJECT-TYPE
	InetAddress

rlCopyInetDestinationUnitNumber		1.3.6.1.4.1.9.6.1.101.87.8.1.12
The unit number of the destination unit, value 257 means all units
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopyInetDestinationFileName		1.3.6.1.4.1.9.6.1.101.87.8.1.13
The name of the destination file.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

rlCopyInetDestinationFileType		1.3.6.1.4.1.9.6.1.101.87.8.1.14
The type of the destination file.
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyFileType

rlCopyInetUpTime		1.3.6.1.4.1.9.6.1.101.87.8.1.15
The time elapsed since this entry was created.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

rlCopyInetOperationState		1.3.6.1.4.1.9.6.1.101.87.8.1.16
The state of the copy operation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	uploadInProgress(1), downloadInProgress(2), copyFailed(3), copyTimedout(4), copyFinished(5)

rlCopyInetBytesTransferred		1.3.6.1.4.1.9.6.1.101.87.8.1.17
The number of bytes that were transferred by the copy operation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlCopyInetInBackground		1.3.6.1.4.1.9.6.1.101.87.8.1.18
When enabled the copy operation is done in the background.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rlCopyInetRowStatus		1.3.6.1.4.1.9.6.1.101.87.8.1.19
It is used to insert or delete an entry
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

rlCopyInetHistoryIndex		1.3.6.1.4.1.9.6.1.101.87.8.1.20
The index of the entry corresponding to this one in the rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex). A value of 0 indicates that no history entry should be kept for this copy operation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopyInetDestinationUnitList		1.3.6.1.4.1.9.6.1.101.87.8.1.21
A bitmap of destination units for copy operation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopyInetUnitStatusList		1.3.6.1.4.1.9.6.1.101.87.8.1.22
A bitmap of copy operation status for each unit.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlCopyInetSpecificCopyInfo		1.3.6.1.4.1.9.6.1.101.87.8.1.23
Copy application specific information. For example: for SCP copy this field can be used to pass username and password information.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

rlCopyHistoryInetTable		1.3.6.1.4.1.9.6.1.101.87.9
The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlCopyHistoryInetEntry

rlCopyHistoryInetEntry		1.3.6.1.4.1.9.6.1.101.87.9.1
An entry (conceptual row) in the rlCopyHistoryTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlCopyHistoryInetEntry

rlCopyHistoryInetHistoryIndex		1.3.6.1.4.1.9.6.1.101.87.9.1.1
The row index in the table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlCopyHistoryInetApplicationId		1.3.6.1.4.1.9.6.1.101.87.9.1.2
The application that activated this comand
Status: current	Access: read-only
OBJECT-TYPE
	RlCopyApplicationType

rlCopyHistoryInetSourceLocation		1.3.6.1.4.1.9.6.1.101.87.9.1.3
Source File Location
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyLocationType

rlCopyHistoryInetSourceIpAddressType		1.3.6.1.4.1.9.6.1.101.87.9.1.4
The Inet address type of the source remote host
Status: current	Access: read-write
OBJECT-TYPE
	InetAddressType

rlCopyHistoryInetSourceIpAddress		1.3.6.1.4.1.9.6.1.101.87.9.1.5
The Inet address of the source remote host
Status: current	Access: read-write
OBJECT-TYPE
	InetAddress

rlCopyHistoryInetSourceUnitNumber		1.3.6.1.4.1.9.6.1.101.87.9.1.6
The unit number of the source unit
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopyHistoryInetSourceFileName		1.3.6.1.4.1.9.6.1.101.87.9.1.7
The name of the source file.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

rlCopyHistoryInetSourceFileType		1.3.6.1.4.1.9.6.1.101.87.9.1.8
The type of the source file.
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyFileType

rlCopyHistoryInetDestinationLocation		1.3.6.1.4.1.9.6.1.101.87.9.1.9
Destination File Location
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyLocationType

rlCopyHistoryInetDestinationIpAddressType		1.3.6.1.4.1.9.6.1.101.87.9.1.10
The Inet address type of the destination remote host
Status: current	Access: read-write
OBJECT-TYPE
	InetAddressType

rlCopyHistoryInetDestinationIpAddress		1.3.6.1.4.1.9.6.1.101.87.9.1.11
The Inet address of the destination remote host
Status: current	Access: read-write
OBJECT-TYPE
	InetAddress

rlCopyHistoryInetDestinationUnitNumber		1.3.6.1.4.1.9.6.1.101.87.9.1.12
The unit number of the destination unit
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopyHistoryInetDestinationFileName		1.3.6.1.4.1.9.6.1.101.87.9.1.13
The name of the destination file.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

rlCopyHistoryInetDestinationFileType		1.3.6.1.4.1.9.6.1.101.87.9.1.14
The type of the destination file.
Status: current	Access: read-write
OBJECT-TYPE
	RlCopyFileType

rlCopyHistoryInetUpTime		1.3.6.1.4.1.9.6.1.101.87.9.1.15
The time elapsed since this entry was created.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

rlCopyHistoryInetOperationState		1.3.6.1.4.1.9.6.1.101.87.9.1.16
The state of the copy operation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	uploadInProgress(1), downloadInProgress(2), copyFailed(3), copyTimedout(4), copyFinished(5)

rlCopyHistoryInetBytesTransferred		1.3.6.1.4.1.9.6.1.101.87.9.1.17
The number of bytes that were transferred by the copy operation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlCopyHistoryInetInBackground		1.3.6.1.4.1.9.6.1.101.87.9.1.18
When enabled the copy operation is done in the background.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rlCopyHistoryInetRowStatus		1.3.6.1.4.1.9.6.1.101.87.9.1.19
It is used delete an entry. No other operations are permitted since the history table is populated and updated through the copy table only.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

rlCopyHistoryInetErrorMessage		1.3.6.1.4.1.9.6.1.101.87.9.1.20
Error message as a result of failed copy action.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

rlCopyHistoryInetDestinationUnitList		1.3.6.1.4.1.9.6.1.101.87.9.1.21
A bitmap of destination units for copy operation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopyHistoryInetUnitStatusList		1.3.6.1.4.1.9.6.1.101.87.9.1.22
A bitmap of copy operation status for each unit.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlCopyUnitsList		1.3.6.1.4.1.9.6.1.101.87.10
Potential list of units used by trap rlCopySWToUnits
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

rlCopyMirrorTimeout		1.3.6.1.4.1.9.6.1.101.87.11
This MIB should be used in order to change the time-interval of automatic copy of startup-config to mirror-config. The MIB is for debugging purposes only, and given value should be the number of minutes for time-interval of this copy.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlCopyOptionsTable		1.3.6.1.4.1.9.6.1.101.87.12
The table includes more field options for the copy operation.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlCopyOptionsEntry

rlCopyOptionsEntry		1.3.6.1.4.1.9.6.1.101.87.12.1
An entry (conceptual row) in the rlCopyOptionsTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlCopyOptionsEntry

rlCopyOptionsIndex		1.3.6.1.4.1.9.6.1.101.87.12.1.1
The index should be equal to the value of rlCopyInetIndex of the relevant rlCopyInetEntry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

rlCopyOptionsRequestedSsdAccess		1.3.6.1.4.1.9.6.1.101.87.12.1.2
The requested format for sensitive data in the copy. Relevant only for configuration file upload
Status: current	Access: read-create
OBJECT-TYPE
	RlCopySecSdAccessType

rlCopyMirror		1.3.6.1.4.1.9.6.1.101.87.13
OBJECT IDENTIFIER

rlCopyMirrorEnable		1.3.6.1.4.1.9.6.1.101.87.13.1
This MIB should be used in order to enable/disable automatic copy of startup-config to mirror-config.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

rlCopyStaticDowngradeStatus		1.3.6.1.4.1.9.6.1.101.87.14
Controls whether static downgrade in progress
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue