CISCO-WAN-ATM-CUG-MIB
File:
CISCO-WAN-ATM-CUG-MIB.mib (15178 bytes)
Imported modules
Imported symbols
Defined Types
| CiscoAtmAddressType |
|
| The type of an ATM Address.
The value e164(3) indicates the address format
is that of ITU-T defined address format.
The value nsap(8) indicates the address format
is that of ATM private network address or ATM
end-point identifiers.
The CiscoAtmAddressType textual convention SHOULD
NOT be subtyped in object type definitions to support
future extensions. It MAY be subtyped in compliance
statements in order to require only a subset of
these address types for a compliant implementation.
Note that the enumerated values of this TC are
aligned with AddressFamilyNumbers from
IANA-ADDRESS-FAMILY-NUMBERS-MIB. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
e164(3), nsap(8) |
|
| CiscoAtmInterlockCode |
|
| A Closed User Group(CUG) Interlock Code. Each
'Interlock Code' uniquely identifies a Closed
User Group in the network. This is a
'PNNI Interlock Code', it contains a 20-octet
ATM End Station Address(AESA) and a 4-octet Suffix.
|
| TEXTUAL-CONVENTION |
|
|
|
| |
OCTET STRING |
Size(24) |
|
| CwaCugEntry |
|
| SEQUENCE |
|
|
|
| |
cwaAtmAddress |
AtmAddr |
|
| |
cwaAddressLength |
CiscoAtmAddressLength |
|
| |
cwaCugIndex |
Integer32 |
|
| |
cwaAddressPlan |
CiscoAtmAddressType |
|
| |
cwaInterlockCode |
CiscoAtmInterlockCode |
|
| |
cwaCallsBarred |
INTEGER |
|
| |
cwaCugRowStatus |
RowStatus |
|
| CwaAddressCugEntry |
|
| SEQUENCE |
|
|
|
| |
cwaCugAtmAddressPlan |
CiscoAtmAddressType |
|
| |
cwaIncomingAccess |
INTEGER |
|
| |
cwaOutgoingAccess |
INTEGER |
|
| |
cwaPreferentialCug |
Integer32 |
|
Defined Values
| ciscoWanAtmCugMIB |
1.3.6.1.4.1.9.9.99999 |
| This MIB module is intended for the management of
'Closed User Group(CUG)' in Cisco ATM switches.
This MIB definition is based upon 'Closed User Group'
recommended by International Telecommunication Union(ITU).
The CUG supplementary service enables users to form groups,
to and from which access is restricted. A specific user may
be member of one or more closed user groups. Members of a
specific closed user group can communicate among themselves
but not, in general, with users outside the group. Specific
CUG members can have additional capabilities that allow
them to originate calls to destinations outside the group,
and/or to receive calls from outside the group. Specific
CUG members can have additional restrictions that prevent
them from originating calls to other members of the CUG,
or from receiving calls from other members of the CUG.
ITU-T Q.2955.1 Stage 3 description for community of interest
supplementary services using B-ISDN Digital Subscriber
Signalling System No.2(DSS 2): Closed User Group(CUG). |
| MODULE-IDENTITY |
|
|
|
| cwaCug |
1.3.6.1.4.1.9.9.99999.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| cwaCugTable |
1.3.6.1.4.1.9.9.99999.1.1.1 |
| This table contains a sequence of CUGs for each
ATM address. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CwaCugEntry |
|
| cwaCugEntry |
1.3.6.1.4.1.9.9.99999.1.1.1.1 |
| The entry represents one CUG for an ATM address. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CwaCugEntry |
|
|
| cwaAtmAddress |
1.3.6.1.4.1.9.9.99999.1.1.1.1.1 |
| A provisioned ATM address on the managed system. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtmAddr |
|
|
| cwaCugIndex |
1.3.6.1.4.1.9.9.99999.1.1.1.1.3 |
| The CUG index is a parameter used by the calling
user to select a particular CUG when originating
a call. The index is also used by the network to
indicate to the called user the CUG from which
an incoming call has originated. This index has
only local significance.
Each 'cwaCugIndex' assigned to an ATM address must be
unique for this ATM address. For each 'cwaCugIndex'
must have one corresponding cwaInterLockCode
assigned. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..65535 |
|
| cwaAddressPlan |
1.3.6.1.4.1.9.9.99999.1.1.1.1.4 |
| This is the type of the ATM address associated
with this entry. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
CiscoAtmAddressType |
|
|
| cwaInterlockCode |
1.3.6.1.4.1.9.9.99999.1.1.1.1.5 |
| This is the 'Closed User Group(CUG) Interlock Code'
associated with this entry. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
CiscoAtmInterlockCode |
|
|
| cwaCallsBarred |
1.3.6.1.4.1.9.9.99999.1.1.1.1.6 |
| This variable indicates if this member can receive calls
from or make calls to other members of the same CUG.
When this variable is set to none(1), it means this
CUG member can receive calls from and make calls to
other members in the same CUG.
When this variable is set to incoming(2), it means this
member cannot receive incoming calls from other members
in the same CUG.
When this variable is set to outgoing(3), it means this
member cannot make calls to other members in the same CUG.
|
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), incoming(2), outgoing(3) |
|
| cwaCugRowStatus |
1.3.6.1.4.1.9.9.99999.1.1.1.1.7 |
| The row status of each entry in this table.
Once the 'cwaInterlockCode' is created, it cannot be
modified. If the management station wants to
assign a different Interlock Code to the same
'cwaCugIndex', the management station must remove
the current entry and then add a new entry with
the same 'cwaCugIndex' and a different 'cwaInterlockCode. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| cwaAddressCugTable |
1.3.6.1.4.1.9.9.99999.1.2.1 |
| A table of CUG parameters associated with
each provisioned ATM address. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CwaAddressCugEntry |
|
| cwaAddressCugEntry |
1.3.6.1.4.1.9.9.99999.1.2.1.1 |
| The managed system will automatically create
an entry in this table when the first CUG
is created for the same ATM address in
'cwaCugTable'.
A entry in this table is automatically
destroyed by the managed system when all
CUGs of the same ATM address are destroyed
in the 'cwaCugTable'. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CwaAddressCugEntry |
|
|
| cwaIncomingAccess |
1.3.6.1.4.1.9.9.99999.1.2.1.1.2 |
| This variable decides whether 'incoming access'
is allowed for a CUG user.
the 'incoming access' allows a CUG user to receive
calls from all other non-CUG users and also from those
other CUG user that allow 'outgoing access'.
When the value is set to notAllowed(1), the
'incoming access' is not allowed.
When the value is set to allowed(2), the 'incoming
access' is allowed.
When this entry is created, this variable has a
value of notAllowed(1). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notAllowed(1), allowed(2) |
|
| cwaOutgoingAccess |
1.3.6.1.4.1.9.9.99999.1.2.1.1.3 |
| This variable decides whether 'outgoing access'
is allowed for a CUG user.
The 'outgoing access' allows a member of a CUG to make
calls to other non-CUG members and also to those
other CUG members that allow 'incoming access'.
When the value is set to notAllowed(1), the 'outgoinging
access' is not allowed.
When the value is set to allowedPerCall(2), the
'outgoing access' is granted on a per call basis. This
means for each call, the 'outgoing access' request must
be part of the call SETUP message.
When the value is set to allowedPermanently(3),
the 'outgoing access' is allowed for all calls.
When this entry is created by the managed
system, this variable has a value of notAllowed(1). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notAllowed(1), allowedPerCall(2), allowedPermanently(3) |
|
| cwaPreferentialCug |
1.3.6.1.4.1.9.9.99999.1.2.1.1.4 |
| The CUG index of the 'preferential CUG' for this address.
There can be only one 'preferential CUG' for an address.
A CUG user subscribing to 'preferential CUG' nominates a
CUG index which the network uses as a default to identify
the required CUG in the absence of any CUG information
in the outgoing call request.
A value of zero means the address does not have a
preferential CUG. The value of this variable must
correspond to a 'cwaCugIndex' of an entry in the
'cwaCugTable'. When an entry is created by the managed
system, this variable has a value of 0.
When selecting a 'preferential' CUG in the address's CUGs,
the corresponding CUG must allow outgoing calls.
This means 'cwaCallsBarred'(Outgoing Calls Barred)
must not have a value of outgoing(2) for the corresponding
CUG. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..65535 |
|
| ciscoWanAtmCugMIBCompliance |
1.3.6.1.4.1.9.9.99999.3.1.1 |
| The compliance statement for SNMPv2 entities which
implement Closed User Groups(CUG). |
| Status: current |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoWanAtmCugGroup |
1.3.6.1.4.1.9.9.99999.3.2.1 |
| This group contains the CUGs for each ATM
address on the managed system. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoWanAtmAddressCugGroup |
1.3.6.1.4.1.9.9.99999.3.2.2 |
| This group contains objects for the CUG for each
ATM address on the managed system. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|