CISCO-WAN-3G-MIB

File: CISCO-WAN-3G-MIB.mib (209535 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMP-FRAMEWORK-MIB
ENTITY-MIB IF-MIB INET-ADDRESS-MIB
SNMPv2-TC CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Unsigned32 Counter64
Counter32 Gauge32 MODULE-COMPLIANCE
NOTIFICATION-GROUP OBJECT-GROUP SnmpAdminString
entPhysicalName entPhysicalIndex ifIndex
InetAddress InetAddressType RowStatus
DisplayString TEXTUAL-CONVENTION TruthValue
ciscoMgmt

Defined Types

C3gServiceCapability  
3G service capability: oneXRtt(0) - 1xRTT evDoRel0(1) - EVDO Revision 0 evDoRelA(2) - EVDO Revision A evDoRelB(3) - EVDO Revision B gprs(4) - GPRS edge(5) - EDGE umtsWcdma(6) - UMTS/WCDMA hsdpa(7) - HSDPA hsupa(8) - HSUPA hspa(9) - HSPA hspaPlus(10) - HSPA Plus lteTdd(11) - LTE TDD lteFdd (12) - LTE FDD
TEXTUAL-CONVENTION    
  BITS oneXRtt(0), evDoRel0(1), evDoRelA(2), evDoRelB(3), gprs(4), edge(5), umtsWcdma(6), hsdpa(7), hsupa(8), hspa(9), hspaPlus(10), lteTdd(11), lteFdd(12)  

C3gRssi  
Generic RSSI range.
TEXTUAL-CONVENTION    
  Integer32 -150..0  

C3gEcIo  
Generic EcIo range.
TEXTUAL-CONVENTION    
  Integer32 -150..0  

C3gTemperature  
Generic temperature range.
TEXTUAL-CONVENTION    
  Integer32 -50..100  

C3gPdpType  
Generic PDP type.
TEXTUAL-CONVENTION    
  INTEGER unknown(1), ipV4(2), ppp(3), ipV6(4), ipV4V6(5)  

C3gUmtsQosTrafficClass  
UMTS QoS traffic classes: subscription(1) - based on user's subscription conversational(2) - conversational streaming(3) - streaming interactive(4) - interactive background(5) - background
TEXTUAL-CONVENTION    
  INTEGER subscription(1), conversational(2), streaming(3), interactive(4), background(5)  

C3gUmtsQosLinkBitRate  
UMTS QoS link bit rate: subscription(1) - based on user's subscription rate16kbps(2) - 16 Kbps rate32kbps(3) - 32 Kbps rate64kbps(4) - 64 Kbps rate128kbps(5) - 128 Kbps rate256kbps(6) - 256 Kbps rate384kbps(7) - 384 Kbps rate1dot8mbps(8) - 1.8 Mbps rate3dot6mbps(9) - 3.6 Mbps rate7dot2mbps(10) - 7.2 Mbps rate14dot4mbps(11) - 14.4 Mbps rate56kbps(12) - 56 Kbps rate1dot15mbps(13) - 1.15 Mbps rate1dot6mbps(14) - 1.6 Mbps rate2dot1mbps(15) - 2.1 Mbps rate2dot8mbps(16) - 2.8 Mbps rate4dot2mbps(17) - 4.2 Mbps rate8dot4mbps(18) - 8.4 Mbps
TEXTUAL-CONVENTION    
  INTEGER subscription(1), rate16kbps(2), rate32kbps(3), rate64kbps(4), rate128kbps(5), rate256kbps(6), rate384kbps(7), rate1dot8mbps(8), rate3dot6mbps(9), rate7dot2mbps(10), rate14dot4mbps(11), rate56kbps(12), rate1dot15mbps(13), rate1dot6mbps(14), rate2dot1mbps(15), rate2dot8mbps(16), rate4dot2mbps(17), rate8dot4mbps(18)  

C3gUmtsQosOrder  
UMTS QoS delivery order: subscription(1) - based on user's subscription withDeliverOrder(2) - with delivery order withoutDeliverOrder(3) - without delivery order
TEXTUAL-CONVENTION    
  INTEGER subscription(1), withDeliverOrder(2), withoutDeliverOrder(3)  

C3gUmtsQosErroneousSdu  
UMTS QoS Delivery of Erroneous Service Data Unit(SDU): subscription(1) - based on user's subscription noDetect(2) - no detect errSduDeliver(3) - erroneous SDUs are delivered errSduNotDeliver(4) - erroneous SDUs are not delivered
TEXTUAL-CONVENTION    
  INTEGER subscription(1), noDetect(2), errSduDeliver(3), errSduNotDeliver(4)  

C3gUmtsQosSer  
UMTS QoS SDU error ratio: subscription(1) - based on user's subscription oneExpMinus2(2) - 1E-2 sevenExpMinus3(3) - 7E-3 oneExpMinus3(4) - 1E-3 oneExpMinus4(5) - 1E-4 oneExpMinus5(6) - 1E-5 oneExpMinus6(7) - 1E-6 oneExpMinus1(8) - 1E-1
TEXTUAL-CONVENTION    
  INTEGER subscription(1), oneExpMinus2(2), sevenExpMinus3(3), oneExpMinus3(4), oneExpMinus4(5), oneExpMinus5(6), oneExpMinus6(7), oneExpMinus1(8)  

C3gUmtsQosBer  
UMTS QoS residual bit error ratio (BER): subscription(1) - based on user's subscription fiveExpMinus2(2) - 5E-2 oneExpMinus2(3) - 1E-2 fiveExpMinus3(4) - 5E-3 fourExpMinus3(5) - 4E-3 oneExpMinus3(6) - 1E-3 oneExpMinus4(7) - 1E-4 oneExpMinus5(8) - 1E-5 oneExpMinus6(9) - 1E-6 sixExpMinus8(10) - 6E-8
TEXTUAL-CONVENTION    
  INTEGER subscription(1), fiveExpMinus2(2), oneExpMinus2(3), fiveExpMinus3(4), fourExpMinus3(5), oneExpMinus3(6), oneExpMinus4(7), oneExpMinus5(8), oneExpMinus6(9), sixExpMinus8(10)  

C3gUmtsQosPriority  
UMTS QoS traffic handling priority: subscription(1) - based on user's subscription level1(2) - priority level 1 level2(3) - priority level 2 level3(4) - priority level 3
TEXTUAL-CONVENTION    
  INTEGER subscription(1), level1(2), level2(3), level3(4)  

C3gUmtsQosSrcStatDescriptor  
UMTS QoS source statistics descriptor: unknown(1) - unknown speech(2) - speech
TEXTUAL-CONVENTION    
  INTEGER unknown(1), speech(2)  

C3gUmtsQosSignalIndication  
UMTS QoS signalling indication: notOptimized(1) - not optimized for signalling traffic optimized(2) - optimized for signalling traffic
TEXTUAL-CONVENTION    
  INTEGER notOptimized(1), optimized(2)  

C3gGprsQosPrecedence  
GPRS QoS precedence: subscription(1) - based on user's subscription highPriority(2) - high priority normalPriority(3) - normal priority lowPriority(4) - low priority
TEXTUAL-CONVENTION    
  INTEGER subscription(1), highPriority(2), normalPriority(3), lowPriority(4)  

C3gGprsQosDelay  
GPRS QoS delay classes: subscription(1) - based on user's subscription delayClass1(2) - delay class 1 delayClass2(3) - delay class 2 delayClass3(4) - delay class 3 delayClass4(5) - delay class 4
TEXTUAL-CONVENTION    
  INTEGER subscription(1), delayClass1(2), delayClass2(3), delayClass3(4), delayClass4(5)  

C3gGprsQosReliability  
GPRS QoS reliability: subscription(1) - based on user's subscription ackGtpLlcRlcProtData(2) - acknowledged GTP, LLC, and RLC; protected data unAckGtpAckLlcRlcProtData(3) - unacknowledged GTP, acknowledged LLC and RLC; protected data unAckGtpLlcAckRlcProtData(4) - unacknowledged GTP and LLC, acknowledged RLC; protected data unAckGtpLlcRlcProtData(5) - unacknowledged GTP, LLC, and RLC; protected data unAckGtpLlcRlcUnProtData(6) - unacknowledged GTP, LLC, and RLC; unprotected data
TEXTUAL-CONVENTION    
  INTEGER subscription(1), ackGtpLlcRlcProtData(2), unAckGtpAckLlcRlcProtData(3), unAckGtpLlcAckRlcProtData(4), unAckGtpLlcRlcProtData(5), unAckGtpLlcRlcUnProtData(6)  

C3gGprsQosPeakRate  
GPRS QoS peak rate: subscription(1) - based on user's subscription upTo1kops(2) - up to 1000 octet/second upTo2kops(3) - up to 2000 octet/second upTo4kops(4) - up to 4000 octet/second upTo8kops(5) - up to 8000 octet/second upTo16kops(6) - up to 16000 octet/second upTo32kops(7) - up to 32000 octet/second upTo64kops(8) - up to 64000 octet/second upTo128kops(9) - up to 128000 octet/second upTo256kops(10) - up to 256000 octet/second
TEXTUAL-CONVENTION    
  INTEGER subscription(1), upTo1kops(2), upTo2kops(3), upTo4kops(4), upTo8kops(5), upTo16kops(6), upTo32kops(7), upTo64kops(8), upTo128kops(9), upTo256kops(10)  

C3gGprsQosMeanRate  
GPRS QoS mean rate: subscription(1) - based on user's subscription rate100(2) - 100 octet/hour rate200(3) - 200 octet/hour rate500(4) - 500 octet/hour rate1k(5) - 1000 octet/hour rate2k(6) - 2000 octet/hour rate5k(7) - 5000 octet/hour rate10k(8) - 10000 octet/hour rate20k(9) - 20000 octet/hour rate50k(10) - 50000 octet/hour rate100k(11) - 100000 octet/hour rate200k(12) - 200000 octet/hour rate500k(13) - 500000 octet/hour rate1m(14) - 1000000 octet/hour rate2m(15) - 2000000 octet/hour rate5m(16) - 5000000 octet/hour rate10m(17) - 10000000 octet/hour rate20m(18) - 20000000 octet/hour rate50m(19) - 50000000 octet/hour resv1(20) - reserved 1 (for future use) resv2(21) - reserved 2 (for future use) resv3(22) - reserved 3 (for future use) resv4(23) - reserved 4 (for future use) resv5(24) - reserved 5 (for future use) resv6(25) - reserved 6 (for future use) resv7(26) - reserved 7 (for future use) resv8(27) - reserved 8 (for future use) resv9(28) - reserved 9 (for future use) resv10(29) - reserved 10 (for future use) resv11(30) - reserved 11 (for future use) resv12(31) - reserved 12 (for future use) bestEffort(32) - best effort
TEXTUAL-CONVENTION    
  INTEGER subscription(1), rate100(2), rate200(3), rate500(4), rate1k(5), rate2k(6), rate5k(7), rate10k(8), rate20k(9), rate50k(10), rate100k(11), rate200k(12), rate500k(13), rate1m(14), rate2m(15), rate5m(16), rate10m(17), rate20m(18), rate50m(19), resv1(20), resv2(21), resv3(22), resv4(23), resv5(24), resv6(25), resv7(26), resv8(27), resv9(28), resv10(29), resv11(30), resv12(31), bestEffort(32)  

C3gWanCommonEntry  
SEQUENCE    
  c3gStandard INTEGER
  c3gCapability C3gServiceCapability
  c3gModemState INTEGER
  c3gPreviousServiceType C3gServiceCapability
  c3gCurrentServiceType C3gServiceCapability
  c3gRoamingStatus INTEGER
  c3gCurrentSystemTime DisplayString
  c3gConnectionStatus INTEGER
  c3gNotifRadioService C3gServiceCapability
  c3gNotifRssi C3gRssi
  c3gNotifEcIo C3gEcIo
  c3gModemTemperature C3gTemperature
  c3gRssiOnsetNotifThreshold C3gRssi
  c3gRssiAbateNotifThreshold C3gRssi
  c3gEcIoOnsetNotifThreshold C3gEcIo
  c3gEcIoAbateNotifThreshold C3gEcIo
  c3gModemTemperOnsetNotifThreshold C3gTemperature
  c3gModemTemperAbateNotifThreshold C3gTemperature
  c3gModemReset INTEGER
  c3gModemUpNotifEnabled TruthValue
  c3gModemDownNotifEnabled TruthValue
  c3gServiceChangedNotifEnabled TruthValue
  c3gNetworkChangedNotifEnabled TruthValue
  c3gConnectionStatusChangedNotifFlag BITS
  c3gRssiOnsetNotifFlag C3gServiceCapability
  c3gRssiAbateNotifFlag C3gServiceCapability
  c3gEcIoOnsetNotifFlag C3gServiceCapability
  c3gEcIoAbateNotifFlag C3gServiceCapability
  c3gModemTemperOnsetNotifEnabled TruthValue
  c3gModemTemperAbateNotifEnabled TruthValue
  c3gGpsState TruthValue

C3gCdmaSessionEntry  
SEQUENCE    
  c3gCdmaTotalCallDuration Counter64
  c3gCdmaTotalTransmitted Counter64
  c3gCdmaTotalReceived Counter64
  c3gHdrDdtmPreference INTEGER

C3gCdmaConnectionEntry  
SEQUENCE    
  c3gOutgoingCallNumber DisplayString
  c3gHdrAtState INTEGER
  c3gHdrSessionState INTEGER
  c3gUati DisplayString
  c3gColorCode Unsigned32
  c3gRati Unsigned32
  c3gHdrSessionDuration Unsigned32
  c3gHdrSessionStart Unsigned32
  c3gHdrSessionEnd Unsigned32
  c3gAuthStatus INTEGER
  c3gHdrDrc Unsigned32
  c3gHdrDrcCover Unsigned32
  c3gHdrRri INTEGER
  c3gMobileIpErrorCode Integer32
  c3gCdmaCurrentTransmitted Counter64
  c3gCdmaCurrentReceived Counter64
  c3gCdmaCurrentCallStatus INTEGER
  c3gCdmaCurrentCallDuration Unsigned32
  c3gCdmaCurrentCallType INTEGER
  c3gCdmaLastCallDisconnReason INTEGER
  c3gCdmaLastConnError INTEGER

C3gCdmaIdentityEntry  
SEQUENCE    
  c3gEsn DisplayString
  c3gModemActivationStatus INTEGER
  c3gAccountActivationDate DisplayString
  c3gCdmaRoamingPreference INTEGER
  c3gPrlVersion Unsigned32
  c3gMdn DisplayString
  c3gMsid DisplayString
  c3gMsl DisplayString

C3gCdmaNetworkEntry  
SEQUENCE    
  c3gCdmaCurrentServiceStatus DisplayString
  c3gCdmaHybridModePreference INTEGER
  c3gCdmaCurrentRoamingStatus INTEGER
  c3gCurrentIdleDigitalMode INTEGER
  c3gCurrentSid Integer32
  c3gCurrentNid Integer32
  c3gCurrentCallSetupMode INTEGER
  c3gSipUsername DisplayString
  c3gSipPassword DisplayString
  c3gServingBaseStationLongitude DisplayString
  c3gServingBaseStationLatitude DisplayString

C3gCdmaProfileCommonEntry  
SEQUENCE    
  c3gNumberOfDataProfileConfigurable Unsigned32
  c3gCurrentActiveDataProfile Unsigned32

C3gCdmaProfileEntry  
SEQUENCE    
  c3gCdmaProfileIndex Integer32
  c3gNai DisplayString
  c3gAaaPassword DisplayString
  c3gMnHaSs INTEGER
  c3gMnHaSpi Unsigned32
  c3gMnAaaSs INTEGER
  c3gMnAaaSpi Unsigned32
  c3gReverseTunnelPreference INTEGER
  c3gHomeAddrType InetAddressType
  c3gHomeAddr InetAddress
  c3gPriHaAddrType InetAddressType
  c3gPriHaAddr InetAddress
  c3gSecHaAddrType InetAddressType
  c3gSecHaAddr InetAddress

C3gCdma1xRttRadioEntry  
SEQUENCE    
  c3gCurrent1xRttRssi C3gRssi
  c3gCurrent1xRttEcIo C3gEcIo
  c3gCurrent1xRttChannelNumber Integer32
  c3gCurrent1xRttChannelState INTEGER

C3gCdma1xRttBandClassEntry  
SEQUENCE    
  c3gBandClassIndex Integer32
  c3g1xRttBandClass Unsigned32

C3gCdmaEvDoRadioEntry  
SEQUENCE    
  c3gCurrentEvDoRssi C3gRssi
  c3gCurrentEvDoEcIo C3gEcIo
  c3gCurrentEvDoChannelNumber Integer32
  c3gSectorId DisplayString
  c3gSubnetMask Unsigned32
  c3gHdrColorCode Unsigned32
  c3gPnOffset Unsigned32
  c3gRxMainGainControl Integer32
  c3gRxDiversityGainControl Integer32
  c3gTxTotalPower Integer32
  c3gTxGainAdjust Integer32
  c3gCarrierToInterferenceRatio Unsigned32

C3gCdmaEvDoBandClassEntry  
SEQUENCE    
  c3gEvDoBandClass Unsigned32

C3gCdmaHistoryEntry  
SEQUENCE    
  c3gCdmaHistory1xRttRssiPerSecond OCTET STRING
  c3gCdmaHistory1xRttRssiPerMinute OCTET STRING
  c3gCdmaHistory1xRttRssiPerHour OCTET STRING
  c3gCdmaHistoryEvDoRssiPerSecond OCTET STRING
  c3gCdmaHistoryEvDoRssiPerMinute OCTET STRING
  c3gCdmaHistoryEvDoRssiPerHour OCTET STRING

C3gCdmaSecurityEntry  
SEQUENCE    
  c3gCdmaPinSecurityStatus INTEGER
  c3gCdmaPowerUpLockStatus INTEGER

C3gGsmIdentityEntry  
SEQUENCE    
  c3gImsi DisplayString
  c3gImei DisplayString
  c3gIccId DisplayString
  c3gMsisdn DisplayString
  c3gFsn DisplayString
  c3gModemStatus INTEGER
  c3gGsmRoamingPreference INTEGER

C3gGsmNetworkEntry  
SEQUENCE    
  c3gGsmLac Unsigned32
  c3gGsmCurrentServiceStatus INTEGER
  c3gGsmCurrentServiceError INTEGER
  c3gGsmCurrentService INTEGER
  c3gGsmPacketService INTEGER
  c3gGsmCurrentRoamingStatus INTEGER
  c3gGsmNetworkSelectionMode INTEGER
  c3gGsmCountry DisplayString
  c3gGsmNetwork DisplayString
  c3gGsmMcc Integer32
  c3gGsmMnc Integer32
  c3gGsmRac Unsigned32
  c3gGsmCurrentCellId Unsigned32
  c3gGsmCurrentPrimaryScramblingCode Unsigned32
  c3gGsmPlmnSelection INTEGER
  c3gGsmRegPlmn DisplayString
  c3gGsmPlmnAbbr DisplayString
  c3gGsmServiceProvider DisplayString
  c3gGsmTotalByteTransmitted Counter64
  c3gGsmTotalByteReceived Counter64

C3gGsmPdpProfileEntry  
SEQUENCE    
  c3gGsmPdpProfileIndex Integer32
  c3gGsmPdpProfileType C3gPdpType
  c3gGsmPdpProfileAddr DisplayString
  c3gGsmPdpProfileApn DisplayString
  c3gGsmPdpProfileAuthenType INTEGER
  c3gGsmPdpProfileUsername DisplayString
  c3gGsmPdpProfilePassword DisplayString
  c3gGsmPdpProfileRowStatus RowStatus

C3gGsmPacketSessionEntry  
SEQUENCE    
  c3gGsmPacketSessionStatus INTEGER
  c3gGsmPdpType C3gPdpType
  c3gGsmPdpAddress DisplayString

C3gGsmReqUmtsQosEntry  
SEQUENCE    
  c3gGsmReqUmtsQosTrafficClass C3gUmtsQosTrafficClass
  c3gGsmReqUmtsQosMaxUpLinkBitRate C3gUmtsQosLinkBitRate
  c3gGsmReqUmtsQosMaxDownLinkBitRate C3gUmtsQosLinkBitRate
  c3gGsmReqUmtsQosGuaUpLinkBitRate C3gUmtsQosLinkBitRate
  c3gGsmReqUmtsQosGuaDownLinkBitRate C3gUmtsQosLinkBitRate
  c3gGsmReqUmtsQosOrder C3gUmtsQosOrder
  c3gGsmReqUmtsQosErroneousSdu C3gUmtsQosErroneousSdu
  c3gGsmReqUmtsQosMaxSduSize Unsigned32
  c3gGsmReqUmtsQosSer C3gUmtsQosSer
  c3gGsmReqUmtsQosBer C3gUmtsQosBer
  c3gGsmReqUmtsQosDelay Unsigned32
  c3gGsmReqUmtsQosPriority C3gUmtsQosPriority
  c3gGsmReqUmtsQosSrcStatDescriptor C3gUmtsQosSrcStatDescriptor
  c3gGsmReqUmtsQosSignalIndication C3gUmtsQosSignalIndication
  c3gGsmReqUmtsQosRowStatus RowStatus

C3gGsmMinUmtsQosEntry  
SEQUENCE    
  c3gGsmMinUmtsQosTrafficClass C3gUmtsQosTrafficClass
  c3gGsmMinUmtsQosMaxUpLinkBitRate C3gUmtsQosLinkBitRate
  c3gGsmMinUmtsQosMaxDownLinkBitRate C3gUmtsQosLinkBitRate
  c3gGsmMinUmtsQosGuaUpLinkBitRate C3gUmtsQosLinkBitRate
  c3gGsmMinUmtsQosGuaDownLinkBitRate C3gUmtsQosLinkBitRate
  c3gGsmMinUmtsQosOrder C3gUmtsQosOrder
  c3gGsmMinUmtsQosErroneousSdu C3gUmtsQosErroneousSdu
  c3gGsmMinUmtsQosMaxSduSize Unsigned32
  c3gGsmMinUmtsQosSer C3gUmtsQosSer
  c3gGsmMinUmtsQosBer C3gUmtsQosBer
  c3gGsmMinUmtsQosDelay Unsigned32
  c3gGsmMinUmtsQosPriority C3gUmtsQosPriority
  c3gGsmMinUmtsQosSrcStatDescriptor C3gUmtsQosSrcStatDescriptor
  c3gGsmMinUmtsQosSignalIndication C3gUmtsQosSignalIndication
  c3gGsmMinUmtsQosRowStatus RowStatus

C3gGsmNegoUmtsQosEntry  
SEQUENCE    
  c3gGsmNegoUmtsQosTrafficClass C3gUmtsQosTrafficClass
  c3gGsmNegoUmtsQosMaxUpLinkBitRate C3gUmtsQosLinkBitRate
  c3gGsmNegoUmtsQosMaxDownLinkBitRate C3gUmtsQosLinkBitRate
  c3gGsmNegoUmtsQosGuaUpLinkBitRate C3gUmtsQosLinkBitRate
  c3gGsmNegoUmtsQosGuaDownLinkBitRate C3gUmtsQosLinkBitRate
  c3gGsmNegoUmtsQosOrder C3gUmtsQosOrder
  c3gGsmNegoUmtsQosErroneousSdu C3gUmtsQosErroneousSdu
  c3gGsmNegoUmtsQosMaxSduSize Unsigned32
  c3gGsmNegoUmtsQosSer C3gUmtsQosSer
  c3gGsmNegoUmtsQosBer C3gUmtsQosBer
  c3gGsmNegoUmtsQosDelay Unsigned32
  c3gGsmNegoUmtsQosPriority C3gUmtsQosPriority
  c3gGsmNegoUmtsQosSrcStatDescriptor C3gUmtsQosSrcStatDescriptor
  c3gGsmNegoUmtsQosSignalIndication C3gUmtsQosSignalIndication

C3gGsmReqGprsQosEntry  
SEQUENCE    
  c3gGsmReqGprsQosPrecedence C3gGprsQosPrecedence
  c3gGsmReqGprsQosDelay C3gGprsQosDelay
  c3gGsmReqGprsQosReliability C3gGprsQosReliability
  c3gGsmReqGprsQosPeakRate C3gGprsQosPeakRate
  c3gGsmReqGprsQosMeanRate C3gGprsQosMeanRate
  c3gGsmReqGprsQosRowStatus RowStatus

C3gGsmMinGprsQosEntry  
SEQUENCE    
  c3gGsmMinGprsQosPrecedence C3gGprsQosPrecedence
  c3gGsmMinGprsQosDelay C3gGprsQosDelay
  c3gGsmMinGprsQosReliability C3gGprsQosReliability
  c3gGsmMinGprsQosPeakRate C3gGprsQosPeakRate
  c3gGsmMinGprsQosMeanRate C3gGprsQosMeanRate
  c3gGsmMinGprsQosRowStatus RowStatus

C3gGsmNegoGprsQosEntry  
SEQUENCE    
  c3gGsmNegoGprsQosPrecedence C3gGprsQosPrecedence
  c3gGsmNegoGprsQosDelay C3gGprsQosDelay
  c3gGsmNegoGprsQosReliability C3gGprsQosReliability
  c3gGsmNegoGprsQosPeakRate C3gGprsQosPeakRate
  c3gGsmNegoGprsQosMeanRate C3gGprsQosMeanRate

C3gGsmRadioEntry  
SEQUENCE    
  c3gCurrentGsmRssi C3gRssi
  c3gCurrentGsmEcIo C3gEcIo
  c3gGsmCurrentBand INTEGER
  c3gGsmChannelNumber Unsigned32
  c3gGsmNumberOfNearbyCell Unsigned32

C3gGsmNearbyCellEntry  
SEQUENCE    
  c3gGsmNearbyCellIndex Integer32
  c3gGsmNearbyCellPrimaryScramblingCode Unsigned32
  c3gGsmNearbyCellRscp Integer32
  c3gGsmNearbyCellEcIoMeasurement C3gEcIo

C3gGsmHistoryEntry  
SEQUENCE    
  c3gGsmHistoryRssiPerSecond OCTET STRING
  c3gGsmHistoryRssiPerMinute OCTET STRING
  c3gGsmHistoryRssiPerHour OCTET STRING

C3gGsmSecurityEntry  
SEQUENCE    
  c3gGsmChv1 INTEGER
  c3gGsmSimStatus INTEGER
  c3gGsmSimUserOperationRequired INTEGER
  c3gGsmNumberOfRetriesRemaining Unsigned32

C3gWanLbsCommonEntry  
SEQUENCE    
  c3gLbsModeSelected INTEGER
  c3gLbsState INTEGER
  c3gLbsLocFixError INTEGER
  c3gLbsLatitude SnmpAdminString
  c3gLbsLongitude SnmpAdminString
  c3gLbsTimeStamp SnmpAdminString
  c3gLbsLocUncertaintyAngle Unsigned32
  c3gLbsLocUncertaintyA Unsigned32
  c3gLbsLocUncertaintyPos Unsigned32
  c3gLbsFixtype INTEGER
  c3gLbsHeightValid TruthValue
  c3gLbsHeight Integer32
  c3gLbsLocUncertaintyVertical Unsigned32
  c3gLbsVelocityValid TruthValue
  c3gLbsHeading Unsigned32
  c3gLbsVelocityHorizontal Unsigned32
  c3gLbsVelocityVertical Unsigned32
  c3gLbsHepe Unsigned32
  c3gLbsNumSatellites Gauge32

C3gWanLbsSatelliteInfoEntry  
SEQUENCE    
  c3gWanLbsSatelliteInfoIndex Integer32
  c3gWanLbsSatelliteNumber Integer32
  c3gWanLbsSatelliteElevation Integer32
  c3gWanLbsSatelliteAzimuth Integer32
  c3gWanLbsSatelliteInfoSignalNoiseRatio Integer32
  c3gWanLbsSatelliteUsed TruthValue
  c3gWanLbsSatelliteInfoRowStatus RowStatus

C3gSmsCommonEntry  
SEQUENCE    
  c3gSmsServiceAvailable TruthValue
  c3gSmsOutSmsCount Counter32
  c3gSmsOutSmsErrorCount Counter32
  c3gSmsInSmsStorageUsed Gauge32
  c3gSmsInSmsStorageUnused Gauge32
  c3gSmsInSmsArchiveCount Gauge32
  c3gSmsInSmsArchiveErrorCount Gauge32
  c3gSmsArchiveUrl SnmpAdminString
  c3gSmsOutSmsStatus INTEGER
  c3gSmsInSmsCount Counter32
  c3gSmsInSmsDeleted Counter32
  c3gSmsInSmsStorageMax Counter64
  c3gSmsInSmsCallBack Counter32
  c3gSmsOutSmsPendingCount Gauge32
  c3gSmsOutSmsArchiveCount Gauge32
  c3gSmsOutSmsArchiveErrorCount Gauge32
  c3gSmsInSmsArchived Gauge32

Defined Values

ciscoWan3gMIB 1.3.6.1.4.1.9.9.661
This MIB module provides network management support for Cisco cellular 3G and 4G LTE WAN products. *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS *** 1xRTT - 1 times Radio Transmission Technology. 3G - Third generation of mobile phones standards and technologies. 4G - Fourth generation of mobile phones standards and technologies Azimuth - Angle of rotation of a satellite Dish. BER - Bit Error Ratio. BS - Base Station. CDMA - Code Division Multiple Access. dB - decibel. dBm - power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). CnS - Control and Status proprietary protocol for managing the control and status of the modem. Ec/Io - ratio of received pilot energy, Ec, to total received energy or the total power spectral density, Io. EDGE - Enhanced Data rate for GSM Evolution. EPS - Evolved Packet System EVDO - EVolution Data Optimized. FDD - Frequency Division Duplexing GPRS - General Packet Radio Service. GSM - Global System for Mobile communications. GPS - Global Positioning System. HSDPA - High Speed Downlink Packet Access. HSPA - High Speed Packet Access. HSUPA - High Speed Uplink Packet Access. LBS - Location Based Service. LTE - Long Term Evolution MT - Mobile Termination. PDP - Packet Data Protocol. PLMN - Public Land Mobile Network. QoS - Quality of Service. RSSI - Received Signal Strength Indication. SDU - Service Data Unit. SER - SDU Error Ratio. SIM - Subscriber Identity Module. SMS - Short Messaging Service. SNR - Signal to Noise Ratio. TDD - Time Division Duplexing UMTS - Universal Mobile Telecommunication System. WCDMA - Wideband Code Division Multiple Access.
MODULE-IDENTITY    

ciscoWan3gMIBNotifs 1.3.6.1.4.1.9.9.661.0
OBJECT IDENTIFIER    

ciscoWan3gMIBObjects 1.3.6.1.4.1.9.9.661.1
OBJECT IDENTIFIER    

ciscoWan3gMIBConform 1.3.6.1.4.1.9.9.661.2
OBJECT IDENTIFIER    

c3gWanCommonTable 1.3.6.1.4.1.9.9.661.1.1
Cellular common objects table which is technology independent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gWanCommonEntry

c3gWanCommonEntry 1.3.6.1.4.1.9.9.661.1.1.1
An entry (conceptual row) in the c3gWanCommonTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gWanCommonEntry  

c3gStandard 1.3.6.1.4.1.9.9.661.1.1.1.1
Cellular Standard: GSM (Global System for Mobile communications, 3GPP), CDMA (Code Division Multiple Access, 3GPP-2). GSM standard also include 4G-LTE technology mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cdma(1), gsm(2)  

c3gCapability 1.3.6.1.4.1.9.9.661.1.1.1.2
Cellular service capability. It currently includes the 2G, 3G and 4G-LTE standard.
Status: current Access: read-only
OBJECT-TYPE    
  C3gServiceCapability  

c3gModemState 1.3.6.1.4.1.9.9.661.1.1.1.3
Cellular modem state, up(2) indicates modem can be detected and down(3) indicates modem can not be detected.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

c3gPreviousServiceType 1.3.6.1.4.1.9.9.661.1.1.1.4
This object indicates the previous service type when service type changes.
Status: current Access: read-only
OBJECT-TYPE    
  C3gServiceCapability  

c3gCurrentServiceType 1.3.6.1.4.1.9.9.661.1.1.1.5
This object indicates the current service type when service type changes.
Status: current Access: read-only
OBJECT-TYPE    
  C3gServiceCapability  

c3gRoamingStatus 1.3.6.1.4.1.9.9.661.1.1.1.6
Cellular current roaming status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), roaming(2), home(3)  

c3gCurrentSystemTime 1.3.6.1.4.1.9.9.661.1.1.1.7
Cellular current system time received from base station.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gConnectionStatus 1.3.6.1.4.1.9.9.661.1.1.1.8
Indicates the current connection status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), error(2), connecting(3), dormant(4), connected(5), disconnected(6), idle(7), active(8), inactive(9)  

c3gNotifRadioService 1.3.6.1.4.1.9.9.661.1.1.1.9
This object is used as one of the var-bind object when notification for RSSI or Ec/Io is generated. This object indicates which service generates the notification.
Status: current Access: read-only
OBJECT-TYPE    
  C3gServiceCapability  

c3gNotifRssi 1.3.6.1.4.1.9.9.661.1.1.1.10
This object is used as one of the var-bind object when notification for RSSI is generated. The relevant RSSI will be copied into c3gNotifRssi which corresponds to the service indicated in c3gNotifRadioService object. This object will reflect the value of one of the following objects: c3gCurrent1xRttRssi, c3gCurrentEvDoRssi and c3gCurrentGsmRssi. User should not use this object to get the current RSSI value as this object is used to indicate the RSSI value that triggers c3gRssiOnsetNotif or c3gRssiAbateNotif notification.
Status: current Access: read-only
OBJECT-TYPE    
  C3gRssi  

c3gNotifEcIo 1.3.6.1.4.1.9.9.661.1.1.1.11
This object is used as one of the var-bind object when notification for Ec/Io is generated. The relevant Ec/Io will be copied into c3gNotifEcIo which corresponds to the service indicated in c3gNotifRadioService object. This object will reflect the value of one of the following objects: c3gCurrent1xRttEcIo, c3gCurrentEvDoEcIo and c3gCurrentGsmEcIo. User should not use this object to get the current Ec/Io value as this object is used to indicate the Ec/Io value that triggers c3gEcIoOnsetNotif or c3gEcIoAbateNotif notification.
Status: current Access: read-only
OBJECT-TYPE    
  C3gEcIo  

c3gModemTemperature 1.3.6.1.4.1.9.9.661.1.1.1.12
The modem temperature.
Status: current Access: read-only
OBJECT-TYPE    
  C3gTemperature  

c3gRssiOnsetNotifThreshold 1.3.6.1.4.1.9.9.661.1.1.1.13
The RSSI onset threshold value. If RSSI goes below the threshold and the service bit in c3gRssiOnsetNotifFlag is set, the c3gRssiOnsetNotif notification for that service will be sent. The absolute value of c3gRssiAbateNotifThreshold should be less than or equal to the absolute value of c3gRssiOnsetNotifThreshold (|c3gRssiAbateNotifThreshold| <= |c3gRssiOnsetNotifThreshold|). e.g. setting c3gRssiAbateNotifThreshold to -115 dBm and then setting c3gRssiOnsetNotifThreshold to -110 dBm is not allowed and will be rejected.
Status: current Access: read-write
OBJECT-TYPE    
  C3gRssi  

c3gRssiAbateNotifThreshold 1.3.6.1.4.1.9.9.661.1.1.1.14
The RSSI abate threshold value. If RSSI goes above the threshold and the service bit in c3gRssiAbateNotifFlag is set, the c3gRssiAbateNotif notification for that service will be sent. The absolute value of c3gRssiAbateNotifThreshold should be less than or equal to the absolute value of c3gRssiOnsetNotifThreshold (|c3gRssiAbateNotifThreshold| <= |c3gRssiOnsetNotifThreshold|). e.g. setting c3gRssiAbateNotifThreshold to -115 dBm and then setting c3gRssiOnsetNotifThreshold to -110 dBm is not allowed and will be rejected.
Status: current Access: read-write
OBJECT-TYPE    
  C3gRssi  

c3gEcIoOnsetNotifThreshold 1.3.6.1.4.1.9.9.661.1.1.1.15
The EcIo onset threshold value. If EcIo goes below the threshold and the service bit in c3gEcIoOnsetNotifFlag is set, the c3gEcIoOnsetNotif notification for that service will be sent. The absolute value of c3gEcIoAbateNotifThreshold should be less than or equal to the absolute value of c3gEcIoOnsetNotifThreshold (|c3gEcIoAbateNotifThreshold| <= |c3gEcIoOnsetNotifThreshold|). e.g. setting c3gEcIoAbateNotifThreshold to -15 dB and then setting c3gEcIoOnsetNotifThreshold to -10 dB is not allowed and will be rejected.
Status: current Access: read-write
OBJECT-TYPE    
  C3gEcIo  

c3gEcIoAbateNotifThreshold 1.3.6.1.4.1.9.9.661.1.1.1.16
The threshold value that if EcIo goes above the threshold and the service bit in c3gEcIoAbateNotifFlag is set, the c3gEcIoAbateNotif notification for that service will be sent. The absolute value of c3gEcIoAbateNotifThreshold should be less than or equal to the absolute value of c3gEcIoOnsetNotifThreshold (|c3gEcIoAbateNotifThreshold| <= |c3gEcIoOnsetNotifThreshold|). e.g. setting c3gEcIoOnsetNotifThreshold to -15 dB and then setting c3gEcIoAbateNotifThreshold to -10 dB is not allowed and will be rejected.
Status: current Access: read-write
OBJECT-TYPE    
  C3gEcIo  

c3gModemTemperOnsetNotifThreshold 1.3.6.1.4.1.9.9.661.1.1.1.17
The modem temperature onset threshold value. If modem temperature goes above the threshold and the value of c3gModemTemperOnsetNotifEnabled is 'true', the c3gModemTemperOnsetNotif notification will be sent. The value of c3gModemTemperAbateNotifThreshold should be less than or equal to the value of c3gModemTemperOnsetNotifThreshold. e.g. setting c3gModemTemperAbateNotifThreshold to 50 degree Celsius and then setting c3gModemTemperOnsetNotifThreshold to 40 degree Celsius is not allowed and will be rejected.
Status: current Access: read-write
OBJECT-TYPE    
  C3gTemperature  

c3gModemTemperAbateNotifThreshold 1.3.6.1.4.1.9.9.661.1.1.1.18
The modem temperature abate threshold value. If modem temperature goes below the threshold and the value of c3gModemTemperAbateNotifEnabled is 'true', the c3gModemTemperAbateNotif notification will be sent. The value of c3gModemTemperAbateNotifThreshold should be less than or equal to the value of c3gModemTemperOnsetNotifThreshold. e.g. setting c3gModemTemperAbateNotifThreshold to 50 degree Celsius and then setting c3gModemTemperOnsetNotifThreshold to 40 degree Celsius is not allowed and will be rejected.
Status: current Access: read-write
OBJECT-TYPE    
  C3gTemperature  

c3gModemReset 1.3.6.1.4.1.9.9.661.1.1.1.19
This object is used to reset or power-cycle the modem.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1), powerCycle(2)  

c3gModemUpNotifEnabled 1.3.6.1.4.1.9.9.661.1.1.1.20
This object is used to enable/disable the generation of modem up notification c3gModemUpNotif.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

c3gModemDownNotifEnabled 1.3.6.1.4.1.9.9.661.1.1.1.21
This object is used to enable/disable the generation of modem down notification c3gModemDownNotif.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

c3gServiceChangedNotifEnabled 1.3.6.1.4.1.9.9.661.1.1.1.22
This object is used to enable/disable the generation of service changed notification c3gServiceChangedNotif.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

c3gNetworkChangedNotifEnabled 1.3.6.1.4.1.9.9.661.1.1.1.23
This object is used to enable/disable the generation of network changed notification c3gNetworkChangedNotif.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

c3gConnectionStatusChangedNotifFlag 1.3.6.1.4.1.9.9.661.1.1.1.24
This object is the flag bitmap to control the generation of notification c3gConnectionStatusChangedNotif. e.g. setting bit 0 (error(0)) to 1 and bit 4 (disconnected(4)) to 1 will cause the notification c3gConnectionStatusChangedNotif to be generated when object c3gConnetionStatus changes the status to error or disconnected. The default value of this object is '00'H.
Status: current Access: read-write
OBJECT-TYPE    
  BITS unknown(0), error(1), connecting(2), dormant(3), connected(4), disconnected(5), idle(6), active(7), inactive(8)  

c3gRssiOnsetNotifFlag 1.3.6.1.4.1.9.9.661.1.1.1.25
This object is the flag bitmap to control the generation of notification c3gRssiOnsetNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification c3gRssiOnsetNotif for that service. The default value of this object is all bits are 0.
Status: current Access: read-write
OBJECT-TYPE    
  C3gServiceCapability  

c3gRssiAbateNotifFlag 1.3.6.1.4.1.9.9.661.1.1.1.26
This object is the flag bitmap to control the generation of notification c3gRssiAbateNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification c3gRssiAbateNotif for that service. The default value of this object is all bits are 0.
Status: current Access: read-write
OBJECT-TYPE    
  C3gServiceCapability  

c3gEcIoOnsetNotifFlag 1.3.6.1.4.1.9.9.661.1.1.1.27
This object is the flag bitmap to control the generation of notification c3gEcIoOnsetNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification c3gEcIoOnsetNotif for that service. The default value of this object is all bits are 0.
Status: current Access: read-write
OBJECT-TYPE    
  C3gServiceCapability  

c3gEcIoAbateNotifFlag 1.3.6.1.4.1.9.9.661.1.1.1.28
This object is the flag bitmap to control the generation of notification c3gEcIoAbateNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification c3gEcIoAbateNotif for that service. The default value of this object is all bits are 0.
Status: current Access: read-write
OBJECT-TYPE    
  C3gServiceCapability  

c3gModemTemperOnsetNotifEnabled 1.3.6.1.4.1.9.9.661.1.1.1.29
This object is used to enable/disable the generation of c3gModemTemperOnsetNotif notification.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

c3gModemTemperAbateNotifEnabled 1.3.6.1.4.1.9.9.661.1.1.1.30
This object is used to enable/disable the generation of c3gModemTemperAbateNotif notification.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

c3gGpsState 1.3.6.1.4.1.9.9.661.1.1.1.31
This object is used to determine or enable/disable the GPS state.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

c3gWanCdma 1.3.6.1.4.1.9.9.661.1.2
OBJECT IDENTIFIER    

c3gWanGsm 1.3.6.1.4.1.9.9.661.1.3
OBJECT IDENTIFIER    

c3gWanLbs 1.3.6.1.4.1.9.9.661.1.4
OBJECT IDENTIFIER    

c3gWanSmsCommon 1.3.6.1.4.1.9.9.661.1.5
OBJECT IDENTIFIER    

c3gCdmaSessionTable 1.3.6.1.4.1.9.9.661.1.2.1
This table describes wireless session (link) created when a modem connects to a particular cellular network. One or more logical calls can be placed over wireless session(link). These logical calls are represented in the c3gCdmaConnectionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gCdmaSessionEntry

c3gCdmaSessionEntry 1.3.6.1.4.1.9.9.661.1.2.1.1
An entry (conceptual row) in the c3gCdmaSessionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gCdmaSessionEntry  

c3gCdmaTotalCallDuration 1.3.6.1.4.1.9.9.661.1.2.1.1.1
Total duration of all calls.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c3gCdmaTotalTransmitted 1.3.6.1.4.1.9.9.661.1.2.1.1.2
Total data transmitted for all calls. It is the total amount of data transmitted by modem, not to be confused with the number of bytes transmitted through the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c3gCdmaTotalReceived 1.3.6.1.4.1.9.9.661.1.2.1.1.3
Total data received for all calls. It is the total amount of data received by modem, not to be confused with the number of bytes received from the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c3gHdrDdtmPreference 1.3.6.1.4.1.9.9.661.1.2.1.1.4
HDR Data Dedicated Transmission Mode (DDTM) preference: unknown(1) - DDTM preference is unknown off(2) - DDTM preference set to OFF on(3) - DDTM preference set to ON noChange(4) - DDTM preference is no change
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), off(2), on(3), noChange(4)  

c3gCdmaConnectionTable 1.3.6.1.4.1.9.9.661.1.2.2
Cellular 3G CDMA connection table. This table describes logical connections/calls over wireless link, the wireless link is described in c3gCdmaSessionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gCdmaConnectionEntry

c3gCdmaConnectionEntry 1.3.6.1.4.1.9.9.661.1.2.2.1
An entry (conceptual row) in the c3gCdmaConnectionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gCdmaConnectionEntry  

c3gOutgoingCallNumber 1.3.6.1.4.1.9.9.661.1.2.2.1.1
Phone number of outgoing call.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gHdrAtState 1.3.6.1.4.1.9.9.661.1.2.2.1.2
High Data Rate (HDR) Access Terminal (AT) state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), inactive(2), acquisition(3), sync(4), idle(5), access(6), connected(7)  

c3gHdrSessionState 1.3.6.1.4.1.9.9.661.1.2.2.1.3
High Data Rate (HDR) session state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), open(2), close(3), addressManagementProtocolSetup(4), atInitiated(5), anInitiated(6)  

c3gUati 1.3.6.1.4.1.9.9.661.1.2.2.1.4
Unicast Access Terminal Identifier (UATI), AT seeking access to the 1 times EV-DO system receives a UATI allocated from the system after setting up a radio traffic channel with a base station.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gColorCode 1.3.6.1.4.1.9.9.661.1.2.2.1.5
Color code. A sync channel may be used by the base station to communicate administrative information to a mobile station. For example, a base station may transmit a base station ID to a user, a color code and administrative information identifying system status.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gRati 1.3.6.1.4.1.9.9.661.1.2.2.1.6
Random Access Terminal Identifier (RATI). AT transmits a UATI request message to the ANC using the RATI to make a UATI allocation request.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gHdrSessionDuration 1.3.6.1.4.1.9.9.661.1.2.2.1.7
HDR connection session duration. It is the duration between c3gHdrSessionStart and c3gHdrSessionEnd.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gHdrSessionStart 1.3.6.1.4.1.9.9.661.1.2.2.1.8
HDR connection session starting time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gHdrSessionEnd 1.3.6.1.4.1.9.9.661.1.2.2.1.9
HDR connection session ending time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gAuthStatus 1.3.6.1.4.1.9.9.661.1.2.2.1.10
Connection authentication status: unknown(1) - authentication status is unknown notAuthenticated(2) - not yet authenticated. authenticated(3) - authenticated. failed(4) - authentication failed. authenticationDisabled(5) - authentication disabled
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), notAuthenticated(2), authenticated(3), failed(4), authenticationDisabled(5)  

c3gHdrDrc 1.3.6.1.4.1.9.9.661.1.2.2.1.11
High Data Rate (HDR) Data Rate Control (DRC). AT provides requests for data transmissions by sending a Data Rate Control, DRC, message via a specific channel referred to as the DRC channel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gHdrDrcCover 1.3.6.1.4.1.9.9.661.1.2.2.1.12
HDR DRC cover. The DRC cover is a coding applied to identify the sector from which the data is to be transmitted. In one embodiment, the DRC cover is a Walsh code applied to the DRC value, wherein a unique code corresponds to each sector in the Active Set of the AT.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gHdrRri 1.3.6.1.4.1.9.9.661.1.2.2.1.13
HDR Rate Request Indicator (RRI). RRI provides the structure of a frame currently being transmitted when frames are transmitted at different rates. Services at different rates are reliably provided by the RRI: unknown(1) - RRI unknown pilotOnly(2) - pilot channel only rri9dot6kbps(3) - RRI is 9.6 Kbit/s rri19dot2kbps(4) - RRI is 19.2 Kbit/s rri38dot4kbps(5) - RRI is 38.4 Kbit/s rri76dot8kbps(6) - RRI is 76.8 Kbit/s rri153dot6kbps(7) - RRI is 153.6 Kbit/s
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), pilotOnly(2), rri9dot6kbps(3), rri19dot2kbps(4), rri38dot4kbps(5), rri76dot8kbps(6), rri153dot6kbps(7)  

c3gMobileIpErrorCode 1.3.6.1.4.1.9.9.661.1.2.2.1.14
Mobile IP error code (please refer to RFC 2002).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

c3gCdmaCurrentTransmitted 1.3.6.1.4.1.9.9.661.1.2.2.1.15
Current number of bytes transmitted by modem for current connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c3gCdmaCurrentReceived 1.3.6.1.4.1.9.9.661.1.2.2.1.16
Current number of bytes received by modem for current connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c3gCdmaCurrentCallStatus 1.3.6.1.4.1.9.9.661.1.2.2.1.17
Current call status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), error(2), connecting(3), dormant(4), connected(5), disconnected(6)  

c3gCdmaCurrentCallDuration 1.3.6.1.4.1.9.9.661.1.2.2.1.18
Current call duration.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gCdmaCurrentCallType 1.3.6.1.4.1.9.9.661.1.2.2.1.19
Current call type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), asyncData(2), voiceCall(3), packet1xRttCall(4), atAsyncDataCall(5), atVoiceCall(6), atPacketCall(7), faxCall(8), smsCall(9), otaCall(10), testCall(11), callWaiting(12), positionDetermination(13), dormant(14), e911Call(15)  

c3gCdmaLastCallDisconnReason 1.3.6.1.4.1.9.9.661.1.2.2.1.20
Last call disconnect reason: unknown(1) - Unknown modemOffline(2) - Modem offline modemCdmaLocTilPowCyc(3) - Modem CDMA locked till power cycle noService(4) - No service abnormalCallEnd(5) - Abnormal call end baseStatIntercept(6) - Base station intercept baseStatRelease(7) - Base station release baseStatReleaseNoReas(8) - Base station release (No reason) baseStatReleaseSoRej(9) - Base station release (SO reject) incomingCall(10) - Incoming call baseStatAlertStop(11) - Base station alert stop clientEndedCall(12) - Client ended call activationEndedOtasp(13) - Activation ended OTASP (Over- The-Air Service Provisioning) ndssFailure(14) - NDSS (Network and Distributed System Security) failure maxAccesProbTransmit(15) - Max access probes transmitted persistTestFailure(16) - Persistence test failure ruimNotPresent(17) - RUIM (Removable User Identity Module) not present accessAttemptInProg(18) - Access attempt in progress reasonUnspecified(19) - Reason unspecified recdRetryOrder(20) - Recd retry order modemLocked(21) - Modem Locked gpsCallEnded(22) - GPS call ended smsCallEnded(23) - SMS (Short Message Service) call ended noConcurrentService(24) - No concurrent service noResponseFromBs(25) - No response from BS (Base station) rejectedByBs(26) - Rejected by BS notCompatConcurServ(27) - Not compatible concurrent service accessBlockedByBs(28) - Access blocked by BS alreadyOnTraffChann(29) - Already on Traffic channel emergencyCall(30) - Emergency call dataCallEnded(31) - Data call ended busyHdr(32) - Busy (HDR) billingOrAuthErrHdr(33) - Billing or Auth error (HDR) sysChangeDueToPrlHdr(34) - System change due to PRL (HDR) hdrExitDueToPrl(35) - HDR exit due to PRL (HDR) noSessionHdr(36) - No Session (HDR) callEndedHdr(37) - Call ended (HDR)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), modemOffline(2), modemCdmaLocTilPowCyc(3), noService(4), abnormalCallEnd(5), baseStatIntercept(6), baseStatRelease(7), baseStatReleaseNoReas(8), baseStatReleaseSoRej(9), incomingCall(10), baseStatAlertStop(11), clientEndedCall(12), activationEndedOtasp(13), ndssFailure(14), maxAccesProbTransmit(15), persistTestFailure(16), ruimNotPresent(17), accessAttemptInProg(18), reasonUnspecified(19), recdRetryOrder(20), modemLocked(21), gpsCallEnded(22), smsCallEnded(23), noConcurrentService(24), noResponseFromBs(25), rejectedByBs(26), notCompatConcurServ(27), accessBlockedByBs(28), alreadyOnTraffChann(29), emergencyCall(30), dataCallEnded(31), busyHdr(32), billingOrAuthErrHdr(33), sysChangeDueToPrlHdr(34), hdrExitDueToPrl(35), noSessionHdr(36), callEndedHdr(37)  

c3gCdmaLastConnError 1.3.6.1.4.1.9.9.661.1.2.2.1.21
Last connect error: none(1) - None invalidClientId(2) - Invalid client ID badCallType(3) - Bad call type badServiceType(4) - Bad service type expectingNumber(5) - Expecting number nullNumberBuffer(6) - Null number buffer invalidDigits(7) - Invalid digits outOfRangeNumber(8) - Out of range number nullAalphaBuffer(9) - Null alpha buffer outOfRangeAlphaNumber(10) - Out of range alpha number invalidOtaspActivatCode(11) - Invalid OTASP activation code modemOffline(12) - Modem offline modemLocked(13) - Modem locked unsupportedFlash(14) - Unsupported flash dialedNumberProhibited(15) - Dialed number prohibited onlyE911Calls(16) - Only E911 calls modemInUse(17) - Modem in use unsupportedServiceType(18) - Unsupported service type wrongCallType(19) - Wrong call type invalidCommandCallState(20) - Invalid command (call state) invalidCommandModemState(21) - Invalid command (modem state) noValidService(22) - No valid service cannotAnswerIncomingCall(23) - Cannot answer incoming call badPrivacySetting(24) - Bad privacy setting noCommandBuffers(25) - No command buffers communicationProblem(26) - Communication problem unspecifiedError(27) - Unspecified error invalidLastActiveNetwork(28) - Invalid last active network noCollocatedHdr(29) - No collocated HDR uimNotPresent(30) - UIM (User Identity Module) not present
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), invalidClientId(2), badCallType(3), badServiceType(4), expectingNumber(5), nullNumberBuffer(6), invalidDigits(7), outOfRangeNumber(8), nullAalphaBuffer(9), outOfRangeAlphaNumber(10), invalidOtaspActivatCode(11), modemOffline(12), modemLocked(13), unsupportedFlash(14), dialedNumberProhibited(15), onlyE911Calls(16), modemInUse(17), unsupportedServiceType(18), wrongCallType(19), invalidCommandCallState(20), invalidCommandModemState(21), noValidService(22), cannotAnswerIncomingCall(23), badPrivacySetting(24), noCommandBuffers(25), communicationProblem(26), unspecifiedError(27), invalidLastActiveNetwork(28), noCollocatedHdr(29), uimNotPresent(30)  

c3gCdmaIdentityTable 1.3.6.1.4.1.9.9.661.1.2.3
Cellular 3G CDMA identity table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gCdmaIdentityEntry

c3gCdmaIdentityEntry 1.3.6.1.4.1.9.9.661.1.2.3.1
An entry (conceptual row) in the c3gCdmaIdentityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gCdmaIdentityEntry  

c3gEsn 1.3.6.1.4.1.9.9.661.1.2.3.1.1
This object indicates Electronic Serial Number (ESN).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

c3gModemActivationStatus 1.3.6.1.4.1.9.9.661.1.2.3.1.2
Modem activation status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), activated(2), notActivated(3)  

c3gAccountActivationDate 1.3.6.1.4.1.9.9.661.1.2.3.1.3
Modem account activation date.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

c3gCdmaRoamingPreference 1.3.6.1.4.1.9.9.661.1.2.3.1.4
This object indicates the roaming preference: unknown(1) - preference unknown home(2) - home networks only affiliated(3) - roaming on affiliated networks any(4) - roaming on any network
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), home(2), affiliated(3), any(4)  

c3gPrlVersion 1.3.6.1.4.1.9.9.661.1.2.3.1.5
Preferred Roaming List (PRL) version.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gMdn 1.3.6.1.4.1.9.9.661.1.2.3.1.6
Mobile Directory Number (MDN), a dialable number assigned to a wireless phone.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gMsid 1.3.6.1.4.1.9.9.661.1.2.3.1.7
Mobile Station Identifier (MSID), MSID is utilized to distinguish the mobile station being programmed from other mobile stations during messaging and paging processes, including the downloading of programming information to the mobile station.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gMsl 1.3.6.1.4.1.9.9.661.1.2.3.1.8
Mobile Subscriber Lock (MSL).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gCdmaNetworkTable 1.3.6.1.4.1.9.9.661.1.2.4
Cellular 3G CDMA network table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gCdmaNetworkEntry

c3gCdmaNetworkEntry 1.3.6.1.4.1.9.9.661.1.2.4.1
An entry (conceptual row) in the c3gCdmaNetworkTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gCdmaNetworkEntry  

c3gCdmaCurrentServiceStatus 1.3.6.1.4.1.9.9.661.1.2.4.1.1
Current service status.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gCdmaHybridModePreference 1.3.6.1.4.1.9.9.661.1.2.4.1.2
This object indicates the hybrid mode preference: unknown(1) - preference unknown hybrid(2) - connect to EV-DO/1xRTT services evDoOnly(3) - connect to only EV-DO service oneXRttOnly(4) - connect to only 1xRTT service
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), hybrid(2), evDoOnly(3), oneXRttOnly(4)  

c3gCdmaCurrentRoamingStatus 1.3.6.1.4.1.9.9.661.1.2.4.1.3
Current 1xRTT roaming status, roaming is a general term in wireless telecommunications that refers to the extending of connectivity service in a location that is different from the home location where the service was registered: unknown(1) - roaming status is unknown. home(2) - connectivity service in home location. roamingWithSid(3) - roaming with SID. roamingWithoutSid(4) - roaming without SID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), home(2), roamingWithSid(3), roamingWithoutSid(4)  

c3gCurrentIdleDigitalMode 1.3.6.1.4.1.9.9.661.1.2.4.1.4
Current idle digital mode: unknown(1) - service is unknown noService(2) - no service amps(3) - Advanced Mobile Phone Service (AMPS) cdma(4) - Code Division Multiple Access (CDMA) gsm(5) - Global System for Mobile communications (GSM) hdr(6) - High Data Rate (HDR) wcdma(7) - Wideband Code-Division Multiple-Access (WCDMA) gps(8) - Global Positioning System (GPS) lte(9) - Long Term Evolution (LTE)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), noService(2), amps(3), cdma(4), gsm(5), hdr(6), wcdma(7), gps(8), lte(9)  

c3gCurrentSid 1.3.6.1.4.1.9.9.661.1.2.4.1.5
Current System Identifier (SID), SID is a 15-bit numeric identifiers used by cellular systems to identify the home system of a cellular telephone and by the cellular telephone to determine its roaming status. Value of '-1' indicates SID is 'Not Applicable'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..32767  

c3gCurrentNid 1.3.6.1.4.1.9.9.661.1.2.4.1.6
Current Network Identification (NID), NID is a 16-bit numeric identifiers used by cellular systems. Value of '-1' indicates NID is 'Not Applicable'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..65535  

c3gCurrentCallSetupMode 1.3.6.1.4.1.9.9.661.1.2.4.1.7
Current call setup mode. The 1xEV-DO system supports packet data connections to a public or private data network using either mobile IP or simple IP protocol. For simple IP protocol, moving from the coverage area of one PDSN to another PDSN constitutes a change in packet data session. For mobile IP protocol, a packet data session can span several PDSNs as long as the user continuously maintains mobility bindings at the Home Agent (the IP address is persistent). The modes are: unknown(1) - mode is unknown simpleIpOnly(2) - simple IP only mobileIpPreferWithSipFallback(3) - prefer mobile IP with simple IP as fallback mode mobileIpOnly(4) - mobile IP only
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), simpleIpOnly(2), mobileIpPreferWithSipFallback(3), mobileIpOnly(4)  

c3gSipUsername 1.3.6.1.4.1.9.9.661.1.2.4.1.8
Simple IP (SIP) user name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gSipPassword 1.3.6.1.4.1.9.9.661.1.2.4.1.9
Simple IP (SIP) password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gServingBaseStationLongitude 1.3.6.1.4.1.9.9.661.1.2.4.1.10
Longitude of the serving base station.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gServingBaseStationLatitude 1.3.6.1.4.1.9.9.661.1.2.4.1.11
Latitude of the serving base station.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gCdmaProfile 1.3.6.1.4.1.9.9.661.1.2.5
OBJECT IDENTIFIER    

c3gCdmaProfileCommonTable 1.3.6.1.4.1.9.9.661.1.2.5.1
Cellular 3G CDMA profile common table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gCdmaProfileCommonEntry

c3gCdmaProfileCommonEntry 1.3.6.1.4.1.9.9.661.1.2.5.1.1
An entry (conceptual row) in the c3gCdmaProfileCommonTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gCdmaProfileCommonEntry  

c3gNumberOfDataProfileConfigurable 1.3.6.1.4.1.9.9.661.1.2.5.1.1.1
The number of data profiles configurable.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c3gCurrentActiveDataProfile 1.3.6.1.4.1.9.9.661.1.2.5.1.1.2
The current active data profile.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c3gCdmaProfileTable 1.3.6.1.4.1.9.9.661.1.2.5.2
Cellular 3G CDMA profile table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gCdmaProfileEntry

c3gCdmaProfileEntry 1.3.6.1.4.1.9.9.661.1.2.5.2.1
An entry (conceptual row) in the c3gCdmaProfileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gCdmaProfileEntry  

c3gCdmaProfileIndex 1.3.6.1.4.1.9.9.661.1.2.5.2.1.1
Profile index, combined with entPhysicalIndex to access the profile table c3gCdmaProfileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

c3gNai 1.3.6.1.4.1.9.9.661.1.2.5.2.1.2
Network Access Identifier (NAI). NAI is required to identify the mobile user and the network the mobile user intended to access. The NAI is provided by the mobile node to the dialed ISP during PPP authentication.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gAaaPassword 1.3.6.1.4.1.9.9.661.1.2.5.2.1.3
This object indicates the password for AAA.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gMnHaSs 1.3.6.1.4.1.9.9.661.1.2.5.2.1.4
Mobile Node (MN) Home Agent (HA) Shared Secret (SS) setting: set(1) - shared secret is set notSet(2) - shared secret is not set
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER set(1), notSet(2)  

c3gMnHaSpi 1.3.6.1.4.1.9.9.661.1.2.5.2.1.5
Mobile Node (MN) Home Agent (HA) Security Parameter Index (SPI).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c3gMnAaaSs 1.3.6.1.4.1.9.9.661.1.2.5.2.1.6
Mobile Node (MN) Authentication Authorization Accounting (AAA) Shared Secret (SS) setting: set(1) - shared secret is set notSet(2) - shared secret is not set
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER set(1), notSet(2)  

c3gMnAaaSpi 1.3.6.1.4.1.9.9.661.1.2.5.2.1.7
Mobile Node (MN) Authentication Authorization Accounting (AAA) Security Parameter Index (SPI).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c3gReverseTunnelPreference 1.3.6.1.4.1.9.9.661.1.2.5.2.1.8
Reverse tunnel preference.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER set(1), notSet(2)  

c3gHomeAddrType 1.3.6.1.4.1.9.9.661.1.2.5.2.1.9
A value that represents the type of the IP Address stored in the object c3gHomeAddr.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

c3gHomeAddr 1.3.6.1.4.1.9.9.661.1.2.5.2.1.10
A unicast routable address assigned to a Mobile Node, used as the permanent address of the Mobile Node.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

c3gPriHaAddrType 1.3.6.1.4.1.9.9.661.1.2.5.2.1.11
A value that represents the type of the IP Address stored in the object c3gPriHaAddr.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

c3gPriHaAddr 1.3.6.1.4.1.9.9.661.1.2.5.2.1.12
The primary home agent address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

c3gSecHaAddrType 1.3.6.1.4.1.9.9.661.1.2.5.2.1.13
A value that represents the type of the IP Address stored in the object c3gSecHaAddr.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

c3gSecHaAddr 1.3.6.1.4.1.9.9.661.1.2.5.2.1.14
The secondary home agent address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

c3gCdmaRadio 1.3.6.1.4.1.9.9.661.1.2.6
OBJECT IDENTIFIER    

c3gCdma1xRttRadioTable 1.3.6.1.4.1.9.9.661.1.2.6.1
Cellular 3G CDMA 1xRTT radio table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gCdma1xRttRadioEntry

c3gCdma1xRttRadioEntry 1.3.6.1.4.1.9.9.661.1.2.6.1.1
An entry (conceptual row) in the c3gCdma1xRttRadioTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gCdma1xRttRadioEntry  

c3gCurrent1xRttRssi 1.3.6.1.4.1.9.9.661.1.2.6.1.1.1
Current 1xRTT RSSI value.
Status: current Access: read-only
OBJECT-TYPE    
  C3gRssi  

c3gCurrent1xRttEcIo 1.3.6.1.4.1.9.9.661.1.2.6.1.1.2
Current 1xRTT Ec/Io value.
Status: current Access: read-only
OBJECT-TYPE    
  C3gEcIo  

c3gCurrent1xRttChannelNumber 1.3.6.1.4.1.9.9.661.1.2.6.1.1.3
Current 1xRTT channel number. Current channel number to which the modem is attached to the base station. Value of '-1' indicates 'No Service'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

c3gCurrent1xRttChannelState 1.3.6.1.4.1.9.9.661.1.2.6.1.1.4
Current 1xRTT channel state. Indicates whether the modem is scanning or has acquired the channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), notAcquired(2), acquired(3), scanning(4)  

c3gCdma1xRttBandClassTable 1.3.6.1.4.1.9.9.661.1.2.6.2
Cellular 3G CDMA 1xRTT band class table. This table contains band class information for each available band.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gCdma1xRttBandClassEntry

c3gCdma1xRttBandClassEntry 1.3.6.1.4.1.9.9.661.1.2.6.2.1
An entry (conceptual row) in the c3gCdma1xRttBandClassTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gCdma1xRttBandClassEntry  

c3gBandClassIndex 1.3.6.1.4.1.9.9.661.1.2.6.2.1.1
Band class index, combined with entPhysicalIndex to access the band class table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..32  

c3g1xRttBandClass 1.3.6.1.4.1.9.9.661.1.2.6.2.1.2
This object contains 1xRTT band class.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gCdmaEvDoRadioTable 1.3.6.1.4.1.9.9.661.1.2.6.3
Cellular 3G CDMA EV-DO radio table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gCdmaEvDoRadioEntry

c3gCdmaEvDoRadioEntry 1.3.6.1.4.1.9.9.661.1.2.6.3.1
An entry (conceptual row) in the c3gCdmaEvDoRadioTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gCdmaEvDoRadioEntry  

c3gCurrentEvDoRssi 1.3.6.1.4.1.9.9.661.1.2.6.3.1.1
Current EV-DO RSSI value.
Status: current Access: read-only
OBJECT-TYPE    
  C3gRssi  

c3gCurrentEvDoEcIo 1.3.6.1.4.1.9.9.661.1.2.6.3.1.2
Current EV-DO Ec/Io value.
Status: current Access: read-only
OBJECT-TYPE    
  C3gEcIo  

c3gCurrentEvDoChannelNumber 1.3.6.1.4.1.9.9.661.1.2.6.3.1.3
Current EV-DO channel number. Current channel number to which the modem is attached to the base station. Value of '-1' indicates 'No Service'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

c3gSectorId 1.3.6.1.4.1.9.9.661.1.2.6.3.1.4
Sector ID of the base station to which the modem is attached.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gSubnetMask 1.3.6.1.4.1.9.9.661.1.2.6.3.1.5
Subnet mask of the sector, not to be confused with the IP subnet mask.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gHdrColorCode 1.3.6.1.4.1.9.9.661.1.2.6.3.1.6
Color code of the sector.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gPnOffset 1.3.6.1.4.1.9.9.661.1.2.6.3.1.7
PN offset. PN offset is a time offset from the beginning of the well-known pseudo-random noise sequence that is used to spread the signal from the base station.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gRxMainGainControl 1.3.6.1.4.1.9.9.661.1.2.6.3.1.8
Received main gain control for the modem. value of '-1' indicates the received main gain control is unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

c3gRxDiversityGainControl 1.3.6.1.4.1.9.9.661.1.2.6.3.1.9
Received diversity for the modem. value of '-1' indicates the received diversity is unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

c3gTxTotalPower 1.3.6.1.4.1.9.9.661.1.2.6.3.1.10
Transmit total power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

c3gTxGainAdjust 1.3.6.1.4.1.9.9.661.1.2.6.3.1.11
Transmit gain adjust.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

c3gCarrierToInterferenceRatio 1.3.6.1.4.1.9.9.661.1.2.6.3.1.12
Carrier to interference ratio. Carrier-to-Interference ratio (C/I) is the ratio of power in an RF carrier to the interference power in the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gCdmaEvDoBandClassTable 1.3.6.1.4.1.9.9.661.1.2.6.4
Cellular 3G CDMA EV-DO band class table. This table contains band class information for each available band.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gCdmaEvDoBandClassEntry

c3gCdmaEvDoBandClassEntry 1.3.6.1.4.1.9.9.661.1.2.6.4.1
An entry (conceptual row) in the c3gCdmaEvDoBandClassTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gCdmaEvDoBandClassEntry  

c3gEvDoBandClass 1.3.6.1.4.1.9.9.661.1.2.6.4.1.1
This object contains EV-DO band class.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gCdmaHistoryTable 1.3.6.1.4.1.9.9.661.1.2.6.5
Cellular 3G CDMA history table. The history of RSSI are carried in an octet of string. Each octet in the octet string has a value from 0 to 150 and the 255 value is reserved to indicate an uninitialized (Invalid) value. The format of the octet string with n octets is as following: [ octet 0 is latest, octet 1 is latest-1, . . octet n-2 is oldest-1, octet n-1 is oldest ] To convert the provided value into dBm the following formula should be used: dBm = (-1)*value;
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gCdmaHistoryEntry

c3gCdmaHistoryEntry 1.3.6.1.4.1.9.9.661.1.2.6.5.1
An entry (conceptual row) in the c3gCdmaHistoryTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gCdmaHistoryEntry  

c3gCdmaHistory1xRttRssiPerSecond 1.3.6.1.4.1.9.9.661.1.2.6.5.1.1
Per-second 1xRTT RSSI history. This object contains a per-second history of 1xRTT RSSI values for the last 60 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(60)  

c3gCdmaHistory1xRttRssiPerMinute 1.3.6.1.4.1.9.9.661.1.2.6.5.1.2
Per-minute 1xRTT weakest RSSI value history. This object contains a per-minute history of 1xRTT weakest RSSI values for the last 60 minutes. The octet in the string is the weakest RSSI value measured in a minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(60)  

c3gCdmaHistory1xRttRssiPerHour 1.3.6.1.4.1.9.9.661.1.2.6.5.1.3
Per-hour 1xRTT weakest RSSI value history. This object contains a per-hour history of 1xRTT weakest RSSI values for the last 72 hours. The octet in the string is the weakest RSSI value measured in an hour interval.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(72)  

c3gCdmaHistoryEvDoRssiPerSecond 1.3.6.1.4.1.9.9.661.1.2.6.5.1.4
Per-second EV-DO RSSI history. This object contains a per-second history of EV-DO RSSI values for the last 60 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(60)  

c3gCdmaHistoryEvDoRssiPerMinute 1.3.6.1.4.1.9.9.661.1.2.6.5.1.5
Per-minute EV-DO weakest RSSI value history. This object contains a per-minute history of EV-DO weakest RSSI values for the last 60 minutes. The octet in the string is the weakest RSSI value measured in a minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(60)  

c3gCdmaHistoryEvDoRssiPerHour 1.3.6.1.4.1.9.9.661.1.2.6.5.1.6
Per-hour EV-DO weakest RSSI value history. This object contains a per-hour history of EV-DO weakest RSSI values for the last 72 hours. The octet in the string is the weakest RSSI value measured in an hour interval.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(72)  

c3gCdmaSecurity 1.3.6.1.4.1.9.9.661.1.2.7
OBJECT IDENTIFIER    

c3gCdmaSecurityTable 1.3.6.1.4.1.9.9.661.1.2.7.1
Cellular 3G CDMA security table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gCdmaSecurityEntry

c3gCdmaSecurityEntry 1.3.6.1.4.1.9.9.661.1.2.7.1.1
An entry (conceptual row) in the c3gCdmaSecurityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gCdmaSecurityEntry  

c3gCdmaPinSecurityStatus 1.3.6.1.4.1.9.9.661.1.2.7.1.1.1
CDMA Personal Identification Number (PIN) security: unknown(1) - PIN security unknown locked(2) - PIN security is locked unlocked(3) - PIN security is unlocked
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), locked(2), unlocked(3)  

c3gCdmaPowerUpLockStatus 1.3.6.1.4.1.9.9.661.1.2.7.1.1.2
CDMA power up lock: unknown(1) - power up lock unknown enabled(2) - power up lock enabled disabled(3) - power up lock disabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), enabled(2), disabled(3)  

c3gGsmIdentityTable 1.3.6.1.4.1.9.9.661.1.3.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmIdentityEntry

c3gGsmIdentityEntry 1.3.6.1.4.1.9.9.661.1.3.1.1
An entry (conceptual row) in the c3gGsmIdentityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmIdentityEntry  

c3gImsi 1.3.6.1.4.1.9.9.661.1.3.1.1.1
International Mobile Subscriber Identifier (IMSI), a unique 15-digit code used to identify an individual user on a GSM/LTE network.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gImei 1.3.6.1.4.1.9.9.661.1.3.1.1.2
International Mobile Equipment Identifier (IMEI), a unique 15 or 17 digit code used to identify an individual mobile station to a GSM, UMTS or LTE network.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gIccId 1.3.6.1.4.1.9.9.661.1.3.1.1.3
This object indicates the Integrated Circuit Card ID (ICCID). The ICCID is defined by the ITU-T recommendation E.118. ICCIDs are stored in the SIM cards and are also engraved or printed on the SIM card body during a process called personalization.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gMsisdn 1.3.6.1.4.1.9.9.661.1.3.1.1.4
This object indicates the Mobile Subscriber Integrated Services Digital Network Number (MSISDN). It is a number uniquely identifying a subscription in a GSM, UMTS or LTE mobile network. It represents the telephone number to the SIM card in a mobile/cellular phone.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gFsn 1.3.6.1.4.1.9.9.661.1.3.1.1.5
Forward Sequence Number (FSN), a message acknowledgement method using sequence number in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gModemStatus 1.3.6.1.4.1.9.9.661.1.3.1.1.6
Modem status: unknown(1) - modem status is unknown offLine(2) - modem is off line onLine(3) - modem is on line lowPowerMode(4) - modem is in the low power mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), offLine(2), onLine(3), lowPowerMode(4)  

c3gGsmRoamingPreference 1.3.6.1.4.1.9.9.661.1.3.1.1.7
This object indicates the roaming preference.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), home(2), roaming(3)  

c3gGsmNetworkTable 1.3.6.1.4.1.9.9.661.1.3.2
Cellular GSM Network table. This table is applicable in both 3G and 4G-LTE technology mode
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmNetworkEntry

c3gGsmNetworkEntry 1.3.6.1.4.1.9.9.661.1.3.2.1
An entry (conceptual row) in the c3gGsmNetworkTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmNetworkEntry  

c3gGsmLac 1.3.6.1.4.1.9.9.661.1.3.2.1.1
Location Area Code (LAC), also called as Tracking Area Code (TAC) in LTE standard. LAC/TAC is given by the base station.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gGsmCurrentServiceStatus 1.3.6.1.4.1.9.9.661.1.3.2.1.2
Current Service Status: unknown(1) - current service status is unknown noService(2) - no service normal(3) - service status is normal emergencyOnly(4) - emergency service only
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), noService(2), normal(3), emergencyOnly(4)  

c3gGsmCurrentServiceError 1.3.6.1.4.1.9.9.661.1.3.2.1.3
Current service error: unknown(1) - Unknown none(2) - None imsiUnknownInHlr(3) - IMSI unknown in HLR (Home Location Register) illegalMs(4) - Illegal MS (Mobile Station) imsiUnknownInVlr(5) - IMSI unknown in VLR (Visitor Location Register) imeiNotAccepted(6) - IMEI not accepted illegalMe(7) - Illegal ME (Mobile Entity) gprsServNotAllowed(8) - GPRS services not allowed gprsNonGprsServNotAllow(9) - GPRS and non-GPRS services not allowed msIdentUnknown(10) - MS identity unknown implicitlyDetached(11) - Implicitly detached plmnNotAllowed(12) - PLMN not allowed lacNotAllowed(13) - LAC not allowed roamingNotAllowed(14) - Roaming not allowed gprsServNotAllowInPlmn(15) - GPRS services not allowed in this PLMN noSuitableCellInLa(16) - No suitable cells in LA (Location Area) mscTempNotReachable(17) - MSC (Mobile Switching Center) temporarily not reachable networkFailure(18) - Network failure macFailure(19) - MAC failure synchFailure(20) - Synch failure congestion(21) - Congestion gsmAuthenNotAccept(22) - GSM/LTE Authentication not accepted servOptionNotSupport(23) - Service option not supported reqServOptionNotSub(24) - Requested service option not subscribed servOptionOutOfOrder(25) - Service option out of order callCannotIdentified(26) - Call cannot be identified noPdpContextActivated(27) - No PDP context activated invalidMandatInfo(28) - Invalid mandatory info unpsecProtErr(29) - Unspecified protocol error
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), none(2), imsiUnknownInHlr(3), illegalMs(4), imsiUnknownInVlr(5), imeiNotAccepted(6), illegalMe(7), gprsServNotAllowed(8), gprsNonGprsServNotAllow(9), msIdentUnknown(10), implicitlyDetached(11), plmnNotAllowed(12), lacNotAllowed(13), roamingNotAllowed(14), gprsServNotAllowInPlmn(15), noSuitableCellInLa(16), mscTempNotReachable(17), networkFailure(18), macFailure(19), synchFailure(20), congestion(21), gsmAuthenNotAccept(22), servOptionNotSupport(23), reqServOptionNotSub(24), servOptionOutOfOrder(25), callCannotIdentified(26), noPdpContextActivated(27), invalidMandatInfo(28), unpsecProtErr(29)  

c3gGsmCurrentService 1.3.6.1.4.1.9.9.661.1.3.2.1.4
Current service type: unknown(1) - service type is unknown invalid(2) - no service circuitSwitched(3) - circuit switched service packetSwitched(4) - packet switched service combined(5) - combination of circuit and packet switched service
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), invalid(2), circuitSwitched(3), packetSwitched(4), combined(5)  

c3gGsmPacketService 1.3.6.1.4.1.9.9.661.1.3.2.1.5
Packet Service type: unknown(1) - service type is unknown. none(2) - no service. gprs(3) - General Packet Radio Service (GPRS). edge(4) - Enhanced Data rates for GSM Evolution (EDGE). umtsWcdma(5) - Universal Mobile Telecommunications System (UMTS) / Wideband Code-Division Multiple-Access (W-CDMA). hsdpa(6) - High-Speed Downlink Packet Access (HSDPA) hsdpa(7) - High-Speed Uplink Packet Access (HSUPA) hspa(8) - High-Speed Packet Access (HSPA) hspaPlus(9) - High-Speed Packet Access (HSPA) Plus lte(10) - Long Term Evolution
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), none(2), gprs(3), edge(4), umtsWcdma(5), hsdpa(6), hsupa(7), hspa(8), hspaPlus(9), lte(10)  

c3gGsmCurrentRoamingStatus 1.3.6.1.4.1.9.9.661.1.3.2.1.6
This object indicates whether the modem is in the home network or is roaming.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), roaming(2), home(3)  

c3gGsmNetworkSelectionMode 1.3.6.1.4.1.9.9.661.1.3.2.1.7
Network selection mode. Can be manual selection mode or automatic selection mode. Set to automatic by default.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), automatic(2), manual(3)  

c3gGsmCountry 1.3.6.1.4.1.9.9.661.1.3.2.1.8
Country code. Country code string is given by the base station.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gGsmNetwork 1.3.6.1.4.1.9.9.661.1.3.2.1.9
Network code. Network Code string is given by the base station.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gGsmMcc 1.3.6.1.4.1.9.9.661.1.3.2.1.10
Mobile Country Code (MCC). Value of '-1' indicates MCC is 'Not Applicable'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

c3gGsmMnc 1.3.6.1.4.1.9.9.661.1.3.2.1.11
Mobile Network Code (MNC). Value of '-1' indicates MNC is 'Not Applicable'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

c3gGsmRac 1.3.6.1.4.1.9.9.661.1.3.2.1.12
Routing Area Code (RAC). RAC is given by the base station.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gGsmCurrentCellId 1.3.6.1.4.1.9.9.661.1.3.2.1.13
Cell Identifier of current cell. Cell ID is given by the base station.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gGsmCurrentPrimaryScramblingCode 1.3.6.1.4.1.9.9.661.1.3.2.1.14
Primary scrambling code of current cell. The primary scrambling code is typically identified through symbol-by-symbol correlation over the CPICH (Common Pilot Channel) with all codes within the code group, after the primary scrambling code has been identified, the Primary CCPCH can be detected and the system and cell specific BCH information can be read.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gGsmPlmnSelection 1.3.6.1.4.1.9.9.661.1.3.2.1.15
Public Land Mobile Network (PLMN) selection. Can be manual selection mode or automatic selection mode. Set to automatic by default.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), manual(2), automatic(3)  

c3gGsmRegPlmn 1.3.6.1.4.1.9.9.661.1.3.2.1.16
Registered PLMN.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gGsmPlmnAbbr 1.3.6.1.4.1.9.9.661.1.3.2.1.17
PLMN abbreviated number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gGsmServiceProvider 1.3.6.1.4.1.9.9.661.1.3.2.1.18
Service provider.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gGsmTotalByteTransmitted 1.3.6.1.4.1.9.9.661.1.3.2.1.19
Total number of bytes transmitted for all calls. It is the total number of bytes transmitted by modem, not to be confused with the number of bytes transmitted through the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c3gGsmTotalByteReceived 1.3.6.1.4.1.9.9.661.1.3.2.1.20
Total number of bytes received for all calls. It is the total number of bytes received by modem, not to be confused with the number of bytes received from the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c3gGsmPdpProfile 1.3.6.1.4.1.9.9.661.1.3.3
OBJECT IDENTIFIER    

c3gGsmPdpProfileTable 1.3.6.1.4.1.9.9.661.1.3.3.1
Cellular GSM PDP profiles table. Cellular device contains multiple profile entries which can be used to establish cellular data connections (PDP contexts). Users can choose any of available PDP profiles to establish data connections. Data connections are described in c3gGsmPacketSessionTable. This table is applicable in only 3G technology mode. Refer CISCO-WAN-CELL-EXT-MIB when in 4G-LTE mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmPdpProfileEntry

c3gGsmPdpProfileEntry 1.3.6.1.4.1.9.9.661.1.3.3.1.1
An entry (conceptual row) in the c3gGsmPdpProfileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmPdpProfileEntry  

c3gGsmPdpProfileIndex 1.3.6.1.4.1.9.9.661.1.3.3.1.1.1
Profile index, combined with entPhysicalIndex to access profile table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1000  

c3gGsmPdpProfileType 1.3.6.1.4.1.9.9.661.1.3.3.1.1.2
This object indicates configured Packet Data Protocol (PDP) type.
Status: current Access: read-create
OBJECT-TYPE    
  C3gPdpType  

c3gGsmPdpProfileAddr 1.3.6.1.4.1.9.9.661.1.3.3.1.1.3
Configured PDP/EPS Bearer address. PDP type is defined in c3gGsmPdpProfileType.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gGsmPdpProfileApn 1.3.6.1.4.1.9.9.661.1.3.3.1.1.4
This object indicates profile Access Point Name (APN). This information is provided by the service provider.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gGsmPdpProfileAuthenType 1.3.6.1.4.1.9.9.661.1.3.3.1.1.5
This object indicates PDP authentication type supported. CHAP and PAP are supported in GSM. The type of authentication to be used is provided by the service provider.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(1), none(2), chap(3), pap(4)  

c3gGsmPdpProfileUsername 1.3.6.1.4.1.9.9.661.1.3.3.1.1.6
This object indicates the username to be used for PDP authentication. This information is provided by the service provider.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gGsmPdpProfilePassword 1.3.6.1.4.1.9.9.661.1.3.3.1.1.7
This object indicates the password to be used for PDP authentication. This information is provided by the service provider.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gGsmPdpProfileRowStatus 1.3.6.1.4.1.9.9.661.1.3.3.1.1.8
The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

c3gGsmPacketSessionTable 1.3.6.1.4.1.9.9.661.1.3.3.2
Cellular 3G GSM packet session table. This table is applicable in only 3G technology mode. Refer CISCO-WAN-CELL-EXT-MIB when in 4G-LTE mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmPacketSessionEntry

c3gGsmPacketSessionEntry 1.3.6.1.4.1.9.9.661.1.3.3.2.1
An entry (conceptual row) in the c3gGsmPacketSessionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmPacketSessionEntry  

c3gGsmPacketSessionStatus 1.3.6.1.4.1.9.9.661.1.3.3.2.1.1
This object indicates PDP session status of the profile. This is active when the call is established and PDP contextr has become active.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), active(2), inactive(3)  

c3gGsmPdpType 1.3.6.1.4.1.9.9.661.1.3.3.2.1.2
This object indicates current session PDP type.
Status: current Access: read-only
OBJECT-TYPE    
  C3gPdpType  

c3gGsmPdpAddress 1.3.6.1.4.1.9.9.661.1.3.3.2.1.3
Current session PDP context/EPS Bearer address. PDP type is obtained from c3gGsmPdpType.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

c3gGsmReqUmtsQosTable 1.3.6.1.4.1.9.9.661.1.3.3.3
Requested UMTS QoS parameters table. This table contains UMTS QoS parameters requested by modem to the cellular network via PDP Context Activation Request message. The requested UMTS QoS profile is optional. This table is applicable only in 3G technology mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmReqUmtsQosEntry

c3gGsmReqUmtsQosEntry 1.3.6.1.4.1.9.9.661.1.3.3.3.1
An entry (conceptual row) in the c3gGsmReqUmtsQosTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmReqUmtsQosEntry  

c3gGsmReqUmtsQosTrafficClass 1.3.6.1.4.1.9.9.661.1.3.3.3.1.2
Request UMTS QoS traffic classes.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosTrafficClass  

c3gGsmReqUmtsQosMaxUpLinkBitRate 1.3.6.1.4.1.9.9.661.1.3.3.3.1.3
Request UMTS QoS maximum uplink bit rate.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosLinkBitRate  

c3gGsmReqUmtsQosMaxDownLinkBitRate 1.3.6.1.4.1.9.9.661.1.3.3.3.1.4
Request UMTS QoS maximum downlink bit rate.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosLinkBitRate  

c3gGsmReqUmtsQosGuaUpLinkBitRate 1.3.6.1.4.1.9.9.661.1.3.3.3.1.5
Request UMTS QoS guaranteed uplink bit rate.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosLinkBitRate  

c3gGsmReqUmtsQosGuaDownLinkBitRate 1.3.6.1.4.1.9.9.661.1.3.3.3.1.6
Request UMTS QoS guaranteed downlink bit rate.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosLinkBitRate  

c3gGsmReqUmtsQosOrder 1.3.6.1.4.1.9.9.661.1.3.3.3.1.7
Request UMTS QoS deliver order.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosOrder  

c3gGsmReqUmtsQosErroneousSdu 1.3.6.1.4.1.9.9.661.1.3.3.3.1.8
Request UMTS QoS Delivery of Erroneous SDU.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosErroneousSdu  

c3gGsmReqUmtsQosMaxSduSize 1.3.6.1.4.1.9.9.661.1.3.3.3.1.9
Request UMTS QoS maximum SDU size, the valid range is between 1 and 1520 bytes. Value of '0' indicates the maximum SDU size is unspecified.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1520  

c3gGsmReqUmtsQosSer 1.3.6.1.4.1.9.9.661.1.3.3.3.1.10
Request UMTS QoS SDU error ratio.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosSer  

c3gGsmReqUmtsQosBer 1.3.6.1.4.1.9.9.661.1.3.3.3.1.11
Request UMTS QoS residual bit error ratio.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosBer  

c3gGsmReqUmtsQosDelay 1.3.6.1.4.1.9.9.661.1.3.3.3.1.12
Request UMTS QoS transfer delay in ms, the valid range is between 1 and 4000 ms. Value of '0' indicates the QoS delay is unspecified.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4000  

c3gGsmReqUmtsQosPriority 1.3.6.1.4.1.9.9.661.1.3.3.3.1.13
Request UMTS QoS traffic handling priority.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosPriority  

c3gGsmReqUmtsQosSrcStatDescriptor 1.3.6.1.4.1.9.9.661.1.3.3.3.1.14
Request UMTS QoS source statistics descriptor.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosSrcStatDescriptor  

c3gGsmReqUmtsQosSignalIndication 1.3.6.1.4.1.9.9.661.1.3.3.3.1.15
Request UMTS QoS signalling indication.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosSignalIndication  

c3gGsmReqUmtsQosRowStatus 1.3.6.1.4.1.9.9.661.1.3.3.3.1.16
The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

c3gGsmMinUmtsQosTable 1.3.6.1.4.1.9.9.661.1.3.3.4
Minimum acceptable UMTS QoS table. This table contains minimum acceptable UMTS QoS parameters which is checked by the MT (Mobile Termination) against the negotiated profile returned in the Activate PDP Context Accept message. The minimum acceptable UMTS QoS profile is optional. This table is applicable only in 3G technology mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmMinUmtsQosEntry

c3gGsmMinUmtsQosEntry 1.3.6.1.4.1.9.9.661.1.3.3.4.1
An entry (conceptual row) in the c3gGsmMinUmtsQosTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmMinUmtsQosEntry  

c3gGsmMinUmtsQosTrafficClass 1.3.6.1.4.1.9.9.661.1.3.3.4.1.1
Minimum UMTS QoS traffic classes.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosTrafficClass  

c3gGsmMinUmtsQosMaxUpLinkBitRate 1.3.6.1.4.1.9.9.661.1.3.3.4.1.2
Minimum UMTS QoS maximum uplink bit rate.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosLinkBitRate  

c3gGsmMinUmtsQosMaxDownLinkBitRate 1.3.6.1.4.1.9.9.661.1.3.3.4.1.3
Minimum UMTS QoS maximum downlink bit rate.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosLinkBitRate  

c3gGsmMinUmtsQosGuaUpLinkBitRate 1.3.6.1.4.1.9.9.661.1.3.3.4.1.4
Minimum UMTS QoS guaranteed uplink bit rate.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosLinkBitRate  

c3gGsmMinUmtsQosGuaDownLinkBitRate 1.3.6.1.4.1.9.9.661.1.3.3.4.1.5
Minimum UMTS QoS guaranteed downlink bit rate.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosLinkBitRate  

c3gGsmMinUmtsQosOrder 1.3.6.1.4.1.9.9.661.1.3.3.4.1.6
Minimum UMTS QoS deliver order.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosOrder  

c3gGsmMinUmtsQosErroneousSdu 1.3.6.1.4.1.9.9.661.1.3.3.4.1.7
Minimum UMTS QoS Delivery of Erroneous SDU.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosErroneousSdu  

c3gGsmMinUmtsQosMaxSduSize 1.3.6.1.4.1.9.9.661.1.3.3.4.1.8
Minimum UMTS maximum SDU size, the valid range is between 1 and 1520 bytes. Value of '0' indicates the maximum SDU size is unspecified.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1520  

c3gGsmMinUmtsQosSer 1.3.6.1.4.1.9.9.661.1.3.3.4.1.9
Minimum UMTS QoS SDU error ratio.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosSer  

c3gGsmMinUmtsQosBer 1.3.6.1.4.1.9.9.661.1.3.3.4.1.10
Minimum UMTS residual bit error ratio.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosBer  

c3gGsmMinUmtsQosDelay 1.3.6.1.4.1.9.9.661.1.3.3.4.1.11
Minimum UMTS transfer delay in ms, the valid range is between 1 and 4000 ms. Value of '0' indicates the QoS delay is unspecified.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4000  

c3gGsmMinUmtsQosPriority 1.3.6.1.4.1.9.9.661.1.3.3.4.1.12
Minimum UMTS QoS traffic handling priority.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosPriority  

c3gGsmMinUmtsQosSrcStatDescriptor 1.3.6.1.4.1.9.9.661.1.3.3.4.1.13
Minimum UMTS QoS source statistics descriptor.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosSrcStatDescriptor  

c3gGsmMinUmtsQosSignalIndication 1.3.6.1.4.1.9.9.661.1.3.3.4.1.14
Minimum UMTS QoS signalling indication.
Status: current Access: read-create
OBJECT-TYPE    
  C3gUmtsQosSignalIndication  

c3gGsmMinUmtsQosRowStatus 1.3.6.1.4.1.9.9.661.1.3.3.4.1.15
The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

c3gGsmNegoUmtsQosTable 1.3.6.1.4.1.9.9.661.1.3.3.5
Negotiated UMTS QoS table. This table contains negotiated UMTS QoS parameters returned in the Activate PDP Context Accept message. The objects in this table are valid only if the value of object c3gGsmPacketSessionStatus defined in c3gGsmPacketSessionTable is 'active'. This table is applicable only in 3G technology mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmNegoUmtsQosEntry

c3gGsmNegoUmtsQosEntry 1.3.6.1.4.1.9.9.661.1.3.3.5.1
An entry (conceptual row) in the c3gGsmNegoUmtsQosTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmNegoUmtsQosEntry  

c3gGsmNegoUmtsQosTrafficClass 1.3.6.1.4.1.9.9.661.1.3.3.5.1.1
Negotiated UMTS QoS traffic classes.
Status: current Access: read-only
OBJECT-TYPE    
  C3gUmtsQosTrafficClass  

c3gGsmNegoUmtsQosMaxUpLinkBitRate 1.3.6.1.4.1.9.9.661.1.3.3.5.1.2
Negotiated UMTS QoS maximum uplink bit rate.
Status: current Access: read-only
OBJECT-TYPE    
  C3gUmtsQosLinkBitRate  

c3gGsmNegoUmtsQosMaxDownLinkBitRate 1.3.6.1.4.1.9.9.661.1.3.3.5.1.3
Negotiated UMTS QoS maximum downlink bit rate.
Status: current Access: read-only
OBJECT-TYPE    
  C3gUmtsQosLinkBitRate  

c3gGsmNegoUmtsQosGuaUpLinkBitRate 1.3.6.1.4.1.9.9.661.1.3.3.5.1.4
Negotiated UMTS QoS guaranteed uplink bit rate.
Status: current Access: read-only
OBJECT-TYPE    
  C3gUmtsQosLinkBitRate  

c3gGsmNegoUmtsQosGuaDownLinkBitRate 1.3.6.1.4.1.9.9.661.1.3.3.5.1.5
Negotiated UMTS QoS guaranteed downlink bit rate.
Status: current Access: read-only
OBJECT-TYPE    
  C3gUmtsQosLinkBitRate  

c3gGsmNegoUmtsQosOrder 1.3.6.1.4.1.9.9.661.1.3.3.5.1.6
Negotiated UMTS QoS deliver order.
Status: current Access: read-only
OBJECT-TYPE    
  C3gUmtsQosOrder  

c3gGsmNegoUmtsQosErroneousSdu 1.3.6.1.4.1.9.9.661.1.3.3.5.1.7
Negotiated UMTS QoS Delivery of Erroneous SDU.
Status: current Access: read-only
OBJECT-TYPE    
  C3gUmtsQosErroneousSdu  

c3gGsmNegoUmtsQosMaxSduSize 1.3.6.1.4.1.9.9.661.1.3.3.5.1.8
Negotiated UMTS QoS maximum SDU size, the valid range is between 1 and 1520 bytes. Value of '0' indicates the maximum SDU size is subscribed.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1520  

c3gGsmNegoUmtsQosSer 1.3.6.1.4.1.9.9.661.1.3.3.5.1.9
Negotiated UMTS QoS SDU error ratio.
Status: current Access: read-only
OBJECT-TYPE    
  C3gUmtsQosSer  

c3gGsmNegoUmtsQosBer 1.3.6.1.4.1.9.9.661.1.3.3.5.1.10
Negotiated UMTS QoS residual bit error ratio.
Status: current Access: read-only
OBJECT-TYPE    
  C3gUmtsQosBer  

c3gGsmNegoUmtsQosDelay 1.3.6.1.4.1.9.9.661.1.3.3.5.1.11
Negotiated UMTS QoS transfer delay in ms, the valid range is between 1 and 4000 ms. Value of '0' indicates the QoS delay is subscribed.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4000  

c3gGsmNegoUmtsQosPriority 1.3.6.1.4.1.9.9.661.1.3.3.5.1.12
Negotiated UMTS QoS traffic handling priority.
Status: current Access: read-only
OBJECT-TYPE    
  C3gUmtsQosPriority  

c3gGsmNegoUmtsQosSrcStatDescriptor 1.3.6.1.4.1.9.9.661.1.3.3.5.1.13
Negotiated UMTS QoS source statistics descriptor.
Status: current Access: read-only
OBJECT-TYPE    
  C3gUmtsQosSrcStatDescriptor  

c3gGsmNegoUmtsQosSignalIndication 1.3.6.1.4.1.9.9.661.1.3.3.5.1.14
Negotiated UMTS QoS signalling indication.
Status: current Access: read-only
OBJECT-TYPE    
  C3gUmtsQosSignalIndication  

c3gGsmReqGprsQosTable 1.3.6.1.4.1.9.9.661.1.3.3.6
Requested GPRS QoS parameters table. This table contains GPRS QoS parameters requested by modem to the cellular network via PDP Context Request message. The requested GPRS QoS profile is optional. This table is applicable only in 3G technology mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmReqGprsQosEntry

c3gGsmReqGprsQosEntry 1.3.6.1.4.1.9.9.661.1.3.3.6.1
An entry (conceptual row) in the c3gGsmReqGprsQosTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmReqGprsQosEntry  

c3gGsmReqGprsQosPrecedence 1.3.6.1.4.1.9.9.661.1.3.3.6.1.1
Request GPRS QoS precedence.
Status: current Access: read-create
OBJECT-TYPE    
  C3gGprsQosPrecedence  

c3gGsmReqGprsQosDelay 1.3.6.1.4.1.9.9.661.1.3.3.6.1.2
Request GPRS QoS delay classes.
Status: current Access: read-create
OBJECT-TYPE    
  C3gGprsQosDelay  

c3gGsmReqGprsQosReliability 1.3.6.1.4.1.9.9.661.1.3.3.6.1.3
Request GPRS QoS reliability.
Status: current Access: read-create
OBJECT-TYPE    
  C3gGprsQosReliability  

c3gGsmReqGprsQosPeakRate 1.3.6.1.4.1.9.9.661.1.3.3.6.1.4
Request GPRS QoS peak rate.
Status: current Access: read-create
OBJECT-TYPE    
  C3gGprsQosPeakRate  

c3gGsmReqGprsQosMeanRate 1.3.6.1.4.1.9.9.661.1.3.3.6.1.5
Request GPRS QoS mean rate.
Status: current Access: read-create
OBJECT-TYPE    
  C3gGprsQosMeanRate  

c3gGsmReqGprsQosRowStatus 1.3.6.1.4.1.9.9.661.1.3.3.6.1.6
The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

c3gGsmMinGprsQosTable 1.3.6.1.4.1.9.9.661.1.3.3.7
Minimum acceptable GPRS QoS table. This table contains minimum acceptable GPRS QoS parameters which is checked by the MT (Mobile Termination) against the negotiated profile returned in the Activate PDP Context Accept message. The minimum acceptable GPRS QoS profile is optional. This table is applicable only in 3G technology mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmMinGprsQosEntry

c3gGsmMinGprsQosEntry 1.3.6.1.4.1.9.9.661.1.3.3.7.1
An entry (conceptual row) in the c3gGsmMinGprsQosTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmMinGprsQosEntry  

c3gGsmMinGprsQosPrecedence 1.3.6.1.4.1.9.9.661.1.3.3.7.1.1
Minimum GPRS QoS precedence.
Status: current Access: read-create
OBJECT-TYPE    
  C3gGprsQosPrecedence  

c3gGsmMinGprsQosDelay 1.3.6.1.4.1.9.9.661.1.3.3.7.1.2
Minimum GPRS QoS delay classes.
Status: current Access: read-create
OBJECT-TYPE    
  C3gGprsQosDelay  

c3gGsmMinGprsQosReliability 1.3.6.1.4.1.9.9.661.1.3.3.7.1.3
Minimum GPRS QoS reliability.
Status: current Access: read-create
OBJECT-TYPE    
  C3gGprsQosReliability  

c3gGsmMinGprsQosPeakRate 1.3.6.1.4.1.9.9.661.1.3.3.7.1.4
Minimum GPRS QoS peak rate.
Status: current Access: read-create
OBJECT-TYPE    
  C3gGprsQosPeakRate  

c3gGsmMinGprsQosMeanRate 1.3.6.1.4.1.9.9.661.1.3.3.7.1.5
Minimum GPRS QoS mean rate.
Status: current Access: read-create
OBJECT-TYPE    
  C3gGprsQosMeanRate  

c3gGsmMinGprsQosRowStatus 1.3.6.1.4.1.9.9.661.1.3.3.7.1.6
The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

c3gGsmNegoGprsQosTable 1.3.6.1.4.1.9.9.661.1.3.3.8
Negotiated GPRS QoS table. This table contains negotiated GPRS QoS parameters returned in the Activate PDP Context Accept message. The objects in this table are valid only if the value of object c3gGsmPacketSessionStatus defined in c3gGsmPacketSessionTable is 'active'. This table is applicable only in 3G technology mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmNegoGprsQosEntry

c3gGsmNegoGprsQosEntry 1.3.6.1.4.1.9.9.661.1.3.3.8.1
An entry (conceptual row) in the c3gGsmNegoGprsQosTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmNegoGprsQosEntry  

c3gGsmNegoGprsQosPrecedence 1.3.6.1.4.1.9.9.661.1.3.3.8.1.1
Negotiated GPRS QoS precedence.
Status: current Access: read-only
OBJECT-TYPE    
  C3gGprsQosPrecedence  

c3gGsmNegoGprsQosDelay 1.3.6.1.4.1.9.9.661.1.3.3.8.1.2
Negotiated GPRS QoS delay classes.
Status: current Access: read-only
OBJECT-TYPE    
  C3gGprsQosDelay  

c3gGsmNegoGprsQosReliability 1.3.6.1.4.1.9.9.661.1.3.3.8.1.3
Negotiated GPRS QoS reliability.
Status: current Access: read-only
OBJECT-TYPE    
  C3gGprsQosReliability  

c3gGsmNegoGprsQosPeakRate 1.3.6.1.4.1.9.9.661.1.3.3.8.1.4
Negotiated GPRS QoS peak rate.
Status: current Access: read-only
OBJECT-TYPE    
  C3gGprsQosPeakRate  

c3gGsmNegoGprsQosMeanRate 1.3.6.1.4.1.9.9.661.1.3.3.8.1.5
Negotiated GPRS QoS mean rate.
Status: current Access: read-only
OBJECT-TYPE    
  C3gGprsQosMeanRate  

c3gGsmRadio 1.3.6.1.4.1.9.9.661.1.3.4
OBJECT IDENTIFIER    

c3gGsmRadioTable 1.3.6.1.4.1.9.9.661.1.3.4.1
Cellular 3G GSM/4G-LTE radio table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmRadioEntry

c3gGsmRadioEntry 1.3.6.1.4.1.9.9.661.1.3.4.1.1
An entry (conceptual row) in the c3gGsmRadioTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmRadioEntry  

c3gCurrentGsmRssi 1.3.6.1.4.1.9.9.661.1.3.4.1.1.1
The GPRS/UMTS/LTE RSSI value.
Status: current Access: read-only
OBJECT-TYPE    
  C3gRssi  

c3gCurrentGsmEcIo 1.3.6.1.4.1.9.9.661.1.3.4.1.1.2
The GPRS, UMTS or LTE Ec/Io value.
Status: current Access: read-only
OBJECT-TYPE    
  C3gEcIo  

c3gGsmCurrentBand 1.3.6.1.4.1.9.9.661.1.3.4.1.1.3
GPRS/UMTS/LTE band to which the modem is attached. Refer CISCO-WAN-CELL-EXT-MIB for LTE band number when in LTE mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), invalid(2), none(3), gsm850(4), gsm900(5), gsm1800(6), gsm1900(7), wcdma800(8), wcdma850(9), wcdma1900(10), wcdma2100(11), lteBand(12)  

c3gGsmChannelNumber 1.3.6.1.4.1.9.9.661.1.3.4.1.1.4
Channel number to which the modem is attached. This is only applicable in 3G technology mode. Refer CISCO-WAN-CELL-EXT-MIB for the LTE uplink and downlink channel values
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gGsmNumberOfNearbyCell 1.3.6.1.4.1.9.9.661.1.3.4.1.1.5
This object indicates the current total number of nearby cell in the c3gGsmNearbyCellTable. User can poll this object to get the total number of nearby cell before polling c3gGsmNearbyCellTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gGsmNearbyCellTable 1.3.6.1.4.1.9.9.661.1.3.4.2
Cellular GSM/4G-LTE nearby cell table. Object c3gGsmNumberOfNearbyCell indicates the total number of nearby cell in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmNearbyCellEntry

c3gGsmNearbyCellEntry 1.3.6.1.4.1.9.9.661.1.3.4.2.1
An entry (conceptual row) in the c3gGsmNearbyCellTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmNearbyCellEntry  

c3gGsmNearbyCellIndex 1.3.6.1.4.1.9.9.661.1.3.4.2.1.1
Nearby cell index, combined with entPhysicalIndex to access the Nearby cell table c3gGsmNearbyCellTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..100  

c3gGsmNearbyCellPrimaryScramblingCode 1.3.6.1.4.1.9.9.661.1.3.4.2.1.2
Nearby cell primary scrambling code.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gGsmNearbyCellRscp 1.3.6.1.4.1.9.9.661.1.3.4.2.1.3
Nearby cell Received Signal Code Power (RSCP).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -150..0  

c3gGsmNearbyCellEcIoMeasurement 1.3.6.1.4.1.9.9.661.1.3.4.2.1.4
Nearby cell Ec/Io measurement.
Status: current Access: read-only
OBJECT-TYPE    
  C3gEcIo  

c3gGsmHistoryTable 1.3.6.1.4.1.9.9.661.1.3.4.3
Cellular 3G GSM/4G-LTE RSSI history table. The history of RSSI are carried in an octet of string. Each octet in the octet string has a value from 0 to 150 and the 255 value is reserved to indicate an uninitialized (Invalid) value. The format of the octet string with n octets is as following: [ octet 0 is latest, octet 1 is latest-1, . . octet n-2 is oldest-1, octet n-1 is oldest ] To convert the provided value into dBm the following formula should be used: dBm = (-1)*value;
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmHistoryEntry

c3gGsmHistoryEntry 1.3.6.1.4.1.9.9.661.1.3.4.3.1
An entry (conceptual row) in the c3gGsmHistoryTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmHistoryEntry  

c3gGsmHistoryRssiPerSecond 1.3.6.1.4.1.9.9.661.1.3.4.3.1.1
Per-second RSSI history. This object contains a per-second history of RSSI values for the last 60 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(60)  

c3gGsmHistoryRssiPerMinute 1.3.6.1.4.1.9.9.661.1.3.4.3.1.2
Per-minute weakest RSSI value history. This object contains a per-minute history of weakest RSSI values for the last 60 minutes. The octet in the string is the weakest RSSI value measured in a minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(60)  

c3gGsmHistoryRssiPerHour 1.3.6.1.4.1.9.9.661.1.3.4.3.1.3
Per-hour weakest RSSI value history. This object contains a per-hour history of weakest RSSI values for the last 72 hours. The octet in the string is the weakest RSSI value measured in an hour interval.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(72)  

c3gGsmSecurity 1.3.6.1.4.1.9.9.661.1.3.5
OBJECT IDENTIFIER    

c3gGsmSecurityTable 1.3.6.1.4.1.9.9.661.1.3.5.1
Cellular 3G GSM/4G-LTE security table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gGsmSecurityEntry

c3gGsmSecurityEntry 1.3.6.1.4.1.9.9.661.1.3.5.1.1
An entry (conceptual row) in the c3gGsmSecurityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gGsmSecurityEntry  

c3gGsmChv1 1.3.6.1.4.1.9.9.661.1.3.5.1.1.1
Card Holder Verification 1 (CHV1), if enabled, the PIN will be verified, if disabled, the PIN will not be verified.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), disabled(2), enabled(3)  

c3gGsmSimStatus 1.3.6.1.4.1.9.9.661.1.3.5.1.1.2
SIM status. Indicates whether the SIM is present or removed from the SIM socket, and its current status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), notInserted(3), removed(4), initFailure(5), generalFailure(6), locked(7), chv1Blocked(8), chv2Blocked(9), chv1Rejected(10), chv2Rejected(11), mepLocked(12), networkRejected(13)  

c3gGsmSimUserOperationRequired 1.3.6.1.4.1.9.9.661.1.3.5.1.1.3
If the SIM is protected (for example, because of CHV1 enabled), it will indicate the type of user operation required.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), none(2), enterChv1(3), enterChv2(4), enterUnblockChv1(5), enterUnblockChv2(6), enterMepCode(7)  

c3gGsmNumberOfRetriesRemaining 1.3.6.1.4.1.9.9.661.1.3.5.1.1.4
Indicates the number of attempts remaining in case the SIM is locked. If the number of retries becomes zero, the SIM is blocked and becomes unusable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gWanLbsCommon 1.3.6.1.4.1.9.9.661.1.4.1
OBJECT IDENTIFIER    

c3gWanLbsCommonTable 1.3.6.1.4.1.9.9.661.1.4.1.1
This table contains information about the Cellular Location Based service feature. This GPS data is provided by the wireless modem upon GPS configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gWanLbsCommonEntry

c3gWanLbsCommonEntry 1.3.6.1.4.1.9.9.661.1.4.1.1.1
This entry contains information about the Cellular Location Based service variables returned by the wireless modem.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gWanLbsCommonEntry  

c3gLbsModeSelected 1.3.6.1.4.1.9.9.661.1.4.1.1.1.1
Mode of Location base service selected. unKnown - mode selection unkown standAlone - Standalone mode msBased - MS-Based mode msAssist - MS-Assist mode reserved - reserved for future use
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unKnown(1), standAlone(2), msBased(3), msAssist(4), reserved(5)  

c3gLbsState 1.3.6.1.4.1.9.9.661.1.4.1.1.1.2
Location base service state. gpsDisabled - GPS is disabled gpsEnabled - GPS is enabled gpsLocError - GPS encounters error gpsAcquiring - GPS is acquiring fix
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER gpsDisabled(1), gpsAcquiring(2), gpsEnabled(3), gpsLocError(4)  

c3gLbsLocFixError 1.3.6.1.4.1.9.9.661.1.4.1.1.1.3
Location base service fix error code.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER offline(1), noService(2), noConnection(3), noData(4), sessionBusy(5), reserved(6), gpsDisabled(7), connectionFailed(8), errorState(9), clientEnded(10), uiEnded(11), networkEnded(12), timeout(13), privacyLevel(14), networkAccessError(15), fixError(16), pdeRejected(17), trafficChannelExited(18), e911(19), serverError(20), staleBSinformation(21), resourceContention(22), authenticationParameterFailed(23), authenticationFailedLocal(24), authenticationFailedNetwork(25), vxLcsAgentAuthFail(26), unknownSystemError(27), unsupportedService(28), subscriptionViolation(29), desiredFixMethodFailed(30), antennaSwitch(31), noTxConfirmationReceived(32), normalEndOfSession(33), noErrorFromNetwork(34), noResourcesLeftOnNetwork(35), positionServerNotAvailable(36), unsupportedProtocolVersion(37), ssmolrErrorSystemFailure(38), ssmolrErrorUnexpectedDataValue(39), ssmolrErrorDataMissing(40), ssmolrErrorFacilityNotSupported(41), ssmolrErrorSsSubscriptionViolation(42), ssmolrErrorPositionMethodFailure(43), ssmolrErrorUndefined(44), smlcTimeout(45), mtGguardTimeExpired(46), additionalAssistanceNeeded(47), noFixError(48)  

c3gLbsLatitude 1.3.6.1.4.1.9.9.661.1.4.1.1.1.4
Location base service Latitude.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

c3gLbsLongitude 1.3.6.1.4.1.9.9.661.1.4.1.1.1.5
Location base service longitude.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

c3gLbsTimeStamp 1.3.6.1.4.1.9.9.661.1.4.1.1.1.6
Location base service timestamp.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

c3gLbsLocUncertaintyAngle 1.3.6.1.4.1.9.9.661.1.4.1.1.1.7
GPS Uncertainty parameter Angle, in degrees for the Uncertainty info returned by the GPS device while doing a location fix.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gLbsLocUncertaintyA 1.3.6.1.4.1.9.9.661.1.4.1.1.1.8
GPS Uncertainty parameter A, value in meters for the Uncertainty info returned by the GPS device while doing a location fix.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gLbsLocUncertaintyPos 1.3.6.1.4.1.9.9.661.1.4.1.1.1.9
GPS Uncertainty parameter position, value in meters for the Uncertainty info returned by the GPS device while doing a location fix.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gLbsFixtype 1.3.6.1.4.1.9.9.661.1.4.1.1.1.10
The type of location fix in Location Base service. none - default case, while LBS is not enabled. twoDimension - 2D location fix. threeDimension - 3D location fix.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), twoDimension(2), threeDimension(3)  

c3gLbsHeightValid 1.3.6.1.4.1.9.9.661.1.4.1.1.1.11
This object indicates whether the height returned by the GPS device is valid during location fix.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

c3gLbsHeight 1.3.6.1.4.1.9.9.661.1.4.1.1.1.12
This object indicates the GPS height parameter returned by the GPS device while performing location fix.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -500..500  

c3gLbsLocUncertaintyVertical 1.3.6.1.4.1.9.9.661.1.4.1.1.1.13
GPS parameter vertical velocity parameter returned by the GPS device while performing location fix.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gLbsVelocityValid 1.3.6.1.4.1.9.9.661.1.4.1.1.1.14
This object indicates whether the Velocity value returned by the GPS device is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

c3gLbsHeading 1.3.6.1.4.1.9.9.661.1.4.1.1.1.15
The compass direction toward which the GPS receiver is (or should be) moving.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gLbsVelocityHorizontal 1.3.6.1.4.1.9.9.661.1.4.1.1.1.16
Horizontal Velocity in meters per second the GPS device is heading. This is the value returned by the GPS satellite relative to the last horizontal location of the GPS device. If at Time X satellite sees the location of GPS device is L1 and then at Time Y satellite sees the location is L2 then speed is (L2 - L1) / ( Y - X).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gLbsVelocityVertical 1.3.6.1.4.1.9.9.661.1.4.1.1.1.17
Vertical Velocity in meters per second the GPS device is heading. This is the value returned by the GPS satellite relative to the last vertical location of the GPS device. If at Time X satellite sees the location of GPS device is L1 and then at Time Y satellite sees the location is L2 then speed is (L2 - L1) / ( Y - X).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gLbsHepe 1.3.6.1.4.1.9.9.661.1.4.1.1.1.18
Horizontal Estimated Position Error returned by the GPS satellite for current position of the GPS device.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

c3gLbsNumSatellites 1.3.6.1.4.1.9.9.661.1.4.1.1.1.19
Number of GPS satellites in vision to the modem while GPS tracking is on.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

c3gWanLbsSatelliteInfo 1.3.6.1.4.1.9.9.661.1.4.2
OBJECT IDENTIFIER    

c3gWanLbsSatelliteInfoTable 1.3.6.1.4.1.9.9.661.1.4.2.1
This table provides information on each satellite that is visible to the modem during the location fix. These satellites guide the device to acquire a 2D or 3D location fix.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gWanLbsSatelliteInfoEntry

c3gWanLbsSatelliteInfoEntry 1.3.6.1.4.1.9.9.661.1.4.2.1.1
This table provides information about each satellite's elevation, azimuth, Signal to Noise ratio (SNR) and its reference number local to the router.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gWanLbsSatelliteInfoEntry  

c3gWanLbsSatelliteInfoIndex 1.3.6.1.4.1.9.9.661.1.4.2.1.1.1
An index that is assigned to each satellite under a modem and in combination with entPhysicalIndex uniquely identify it. This index is assigned arbitrarily by the engine and is not saved over reboots.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1000  

c3gWanLbsSatelliteNumber 1.3.6.1.4.1.9.9.661.1.4.2.1.1.2
Each Satellite is assigned a unique number within this device.This object can be used to locate a particular satellite under a modem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

c3gWanLbsSatelliteElevation 1.3.6.1.4.1.9.9.661.1.4.2.1.1.3
Angle of Elevation between the GPS antenna pointing direction, directly towards the satellite, and the local horizontal plane. It is the up-down angle
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

c3gWanLbsSatelliteAzimuth 1.3.6.1.4.1.9.9.661.1.4.2.1.1.4
Azimuth of the current satellite in context referenced by the Satellite InfoIndex. Azimuth is the degree of rotation of the satellites dish on its vertical plane.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

c3gWanLbsSatelliteInfoSignalNoiseRatio 1.3.6.1.4.1.9.9.661.1.4.2.1.1.5
Signal to Noise Ratio(SNR) of received GPS signal. SNR is refered to as the signal strength in GPS standards.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

c3gWanLbsSatelliteUsed 1.3.6.1.4.1.9.9.661.1.4.2.1.1.6
Is this satellite in line of sight to the modem used in calculating the GPS location?
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

c3gWanLbsSatelliteInfoRowStatus 1.3.6.1.4.1.9.9.661.1.4.2.1.1.7
The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

c3gWanSms 1.3.6.1.4.1.9.9.661.1.5.1
OBJECT IDENTIFIER    

c3gSmsCommonTable 1.3.6.1.4.1.9.9.661.1.5.1.1
This table contains Cellular SMS management MIB objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C3gSmsCommonEntry

c3gSmsCommonEntry 1.3.6.1.4.1.9.9.661.1.5.1.1.1
An entry contains counters for the SMS messages received, placed, errored and archived on CDMA, GSM or LTE based modems.
Status: current Access: not-accessible
OBJECT-TYPE    
  C3gSmsCommonEntry  

c3gSmsServiceAvailable 1.3.6.1.4.1.9.9.661.1.5.1.1.1.1
This object indicates the availability of SMS Service.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

c3gSmsOutSmsCount 1.3.6.1.4.1.9.9.661.1.5.1.1.1.2
Number of SMS messages which have been sent successfully.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c3gSmsOutSmsErrorCount 1.3.6.1.4.1.9.9.661.1.5.1.1.1.3
Number of SMS message that could not be sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c3gSmsInSmsStorageUsed 1.3.6.1.4.1.9.9.661.1.5.1.1.1.4
Number of SMS message records space used in the Incoming SMS message storage. One standard SMS message (cdma or gsm) occupies 1 unit of record storage space. A big SMS message can span 'n' sms record space but still be called as 1 SMS message. Storage used can be greater than or equal to total number of Incoming SMS received.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

c3gSmsInSmsStorageUnused 1.3.6.1.4.1.9.9.661.1.5.1.1.1.5
The number of SMS messages record space left unused in the Incoming SMS message storage. This is equal to c3gSmsInSmsStorageMax - c3gSmsInSmsStorageUsed.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

c3gSmsInSmsArchiveCount 1.3.6.1.4.1.9.9.661.1.5.1.1.1.6
Number of successful archive of Incoming SMS messages since router reload. Each SMS message occupies x bytes of space. So if the incoming message is huge, then it is archived as multiple of x bytes but still called as one SMS message. This is the difference between c3gSmsInSmsArchiveCount and c3gSmsInSmsArchived.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

c3gSmsInSmsArchiveErrorCount 1.3.6.1.4.1.9.9.661.1.5.1.1.1.7
The number of Incoming SMS messages that could not be archived since device was reloaded.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

c3gSmsArchiveUrl 1.3.6.1.4.1.9.9.661.1.5.1.1.1.8
URL of the sms archive directory on the ftp server. The url will be of this format ftp://x.y.z.k/user/dirname
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

c3gSmsOutSmsStatus 1.3.6.1.4.1.9.9.661.1.5.1.1.1.9
Status of the last send operation of outgoing SMS message to the network.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), success(2), copySmsHeader(3), copySmsBody(4), sent(5), receivedSentNotification(6), receivedOutMsgNumber(7), receivedOutMsgStatus(8)  

c3gSmsInSmsCount 1.3.6.1.4.1.9.9.661.1.5.1.1.1.10
Number of SMS messages which have been received successfully and stored in router. These SMS's are a mirror copy of SMS stored in Modem or SIM
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c3gSmsInSmsDeleted 1.3.6.1.4.1.9.9.661.1.5.1.1.1.11
Number of SMS messages which have been deleted since router boot up. This does not include SMS messages that are already archived.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c3gSmsInSmsStorageMax 1.3.6.1.4.1.9.9.661.1.5.1.1.1.12
Number of SMS message records space allocated in the router's DRAM to store Incoming SMS messages.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c3gSmsInSmsCallBack 1.3.6.1.4.1.9.9.661.1.5.1.1.1.13
Number of incoming SMS messages that triggered callback.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c3gSmsOutSmsPendingCount 1.3.6.1.4.1.9.9.661.1.5.1.1.1.14
Number of outgoing SMS messages that are in pending queue of the router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

c3gSmsOutSmsArchiveCount 1.3.6.1.4.1.9.9.661.1.5.1.1.1.15
Number of successfull archive of outgoing SMS messages since router reload.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

c3gSmsOutSmsArchiveErrorCount 1.3.6.1.4.1.9.9.661.1.5.1.1.1.16
Number of failed archive of outgoing SMS messages since router reload.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

c3gSmsInSmsArchived 1.3.6.1.4.1.9.9.661.1.5.1.1.1.17
Number of Incoming SMS messages that are successfully archived since router reload.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

c3gModemUpNotif 1.3.6.1.4.1.9.9.661.0.1
This is the notification that the modem has been detected by host interface. Users can enable or disable the generation of this notification by using object c3gModemUpNotifEnabled.
Status: current Access: read-only
NOTIFICATION-TYPE    

c3gModemDownNotif 1.3.6.1.4.1.9.9.661.0.2
This is the notification that the modem has not been detected by host interface, or has been disconnected from host interface. Users can enable or disable the generation of this notification by using object c3gModemDownNotifEnabled.
Status: current Access: read-only
NOTIFICATION-TYPE    

c3gServiceChangedNotif 1.3.6.1.4.1.9.9.661.0.3
Notification for service change event. Objects c3gPreviousServiceType and c3gCurrentServiceType will be included in the notification. Users can enable or disable the generation of this notification by using object c3gServiceChangedNotifEnabled.
Status: current Access: read-only
NOTIFICATION-TYPE    

c3gNetworkChangedNotif 1.3.6.1.4.1.9.9.661.0.4
Notification for network change event. Objects c3gCurrentSid, c3gCurrentNid, c3gGsmMcc, c3gGsmMnc and c3gRoamingStatus will be included in the notification. Users can enable or disable the generation of this notification by using object c3gNetworkChangedNotifEnabled.
Status: current Access: read-only
NOTIFICATION-TYPE    

c3gConnectionStatusChangedNotif 1.3.6.1.4.1.9.9.661.0.5
Notification for connection status change event. Objects c3gConnectionStatus and c3gCurrentServiceType will be included in the notification. Users can use object c3gConnectionStatusChangedNotifFlag to control what connection status changes will cause the generation of this notification.
Status: current Access: read-only
NOTIFICATION-TYPE    

c3gRssiOnsetNotif 1.3.6.1.4.1.9.9.661.0.6
If RSSI goes below c3gRssiOnsetNotifThreshold and the service bit in c3gRssiOnsetNotifFlag is set, this notification will be generated. Object c3gNotifRadioService will indicate which service generates this notification and the associated RSSI will be reported in c3gNotifRssi. Please note that c3gNotifRssi is used to indicate the RSSI value that triggers the notification, user should go to the corresponding radio table to get the current RSSI value.
Status: current Access: read-only
NOTIFICATION-TYPE    

c3gRssiAbateNotif 1.3.6.1.4.1.9.9.661.0.7
If RSSI goes above c3gRssiAbateNotifThreshold and the service bit in c3gRssiAbateNotifFlag is set, this notification will be generated. Object c3gNotifRadioService will indicate which service generates this notification and the associated RSSI will be reported in c3gNotifRssi. Please note that c3gNotifRssi is used to indicate the RSSI value that triggers the notification, user should go to the corresponding radio table to get the current RSSI value.
Status: current Access: read-only
NOTIFICATION-TYPE    

c3gEcIoOnsetNotif 1.3.6.1.4.1.9.9.661.0.8
If Ec/Io goes below c3gEcIoOnsetNotifThreshold and the service bit in c3gEcIoOnsetNotifFlag is set, this notification will be generated. Object c3gNotifRadioService will indicate which service generates this notification and the associated Ec/Io will be reported in c3gNotifEcIo. Please note that c3gNotifEcIo is used to indicate the Ec/Io value that triggers the notification, user should go to the corresponding radio table to get the current Ec/Io value.
Status: current Access: read-only
NOTIFICATION-TYPE    

c3gEcIoAbateNotif 1.3.6.1.4.1.9.9.661.0.9
If Ec/Io goes above c3gEcIoAbateNotifThreshold and the service bit in c3gEcIoAbateNotifFlag is set, this notification will be generated. Object c3gNotifRadioService will indicate which service generates this notification and the associated Ec/Io will be reported in c3gNotifEcIo. Please note that c3gNotifEcIo is used to indicate the Ec/Io value that triggers the notification, user should go to the corresponding radio table to get the current Ec/Io value.
Status: current Access: read-only
NOTIFICATION-TYPE    

c3gModemTemperOnsetNotif 1.3.6.1.4.1.9.9.661.0.10
If modem temperature goes above c3gModemTemperOnsetNotifThreshold and the value of c3gModemTemperOnsetNotifEnabled is 'true', this notification will be generated and the current value of c3gModemTemperature will be included in this notification.
Status: current Access: read-only
NOTIFICATION-TYPE    

c3gModemTemperAbateNotif 1.3.6.1.4.1.9.9.661.0.11
If modem temperature goes below c3gModemTemperAbateNotifThreshold and the value of c3gModemTemperAbateNotifEnabled is 'true', this notification will be generated and the current value of c3gModemTemperature will be included in this notification.
Status: current Access: read-only
NOTIFICATION-TYPE    

c3gModemTemperOnsetRecoveryNotif 1.3.6.1.4.1.9.9.661.0.12
This trap is generated as a recovery notification for c3gModemTemperOnsetNotif.This trap is generated when the current value of c3gModemTemperature goes below c3gModemTemperOnsetNotifThreshold once it has generated the c3gModemTemperOnsetNotif and the value of c3gModemTemperOnsetNotifEnabled is 'true'. c3gModemTemperature contains the current value of modem temperature.
Status: current Access: read-only
NOTIFICATION-TYPE    

c3gModemTemperAbateRecoveryNotif 1.3.6.1.4.1.9.9.661.0.13
This trap is generated as a recovery notification for c3gModemTemperAbateNotif.This trap is generated when the current value of c3gModemTemperature goes above c3gModemTemperAbateNotifThreshold once it has generated the c3gModemTemperAbateNotif and the value of c3gModemTemperAbateNotifEnabled is 'true' c3gModemTemperature contains the current value of modem temperature
Status: current Access: read-only
NOTIFICATION-TYPE    

ciscoWan3gMIBCompliances 1.3.6.1.4.1.9.9.661.2.1
OBJECT IDENTIFIER    

ciscoWan3gMIBGroups 1.3.6.1.4.1.9.9.661.2.2
OBJECT IDENTIFIER    

ciscoWan3gMIBCompliance 1.3.6.1.4.1.9.9.661.2.1.1
This is a default module-compliance containing default object groups.
Status: deprecated Access: read-only
MODULE-COMPLIANCE    

ciscoWan3gMIBCompliance1 1.3.6.1.4.1.9.9.661.2.1.2
The compliance statement for the CISCO-WAN-3G-MIB.
Status: deprecated Access: read-only
MODULE-COMPLIANCE    

ciscoWan3gMIBComplianceRev1 1.3.6.1.4.1.9.9.661.2.1.3
This is a default module-compliance containing default object groups.
Status: current Access: read-only
MODULE-COMPLIANCE    

ciscoWan3gMIBCompliance1Rev1 1.3.6.1.4.1.9.9.661.2.1.4
The compliance statement for the CISCO-WAN-3G-MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

ciscoWan3gMIBCommonObjectGroup 1.3.6.1.4.1.9.9.661.2.2.1
A collection of common objects for Cellular interface.
Status: current Access: read-only
OBJECT-GROUP    

ciscoWan3gMIBCdmaObjectGroup 1.3.6.1.4.1.9.9.661.2.2.2
A collection of objects for Cellular 3G CDMA.
Status: current Access: read-only
OBJECT-GROUP    

ciscoWan3gMIBGsmObjectGroup 1.3.6.1.4.1.9.9.661.2.2.3
A collection of objects for Cellular 3G GSM and LTE.
Status: current Access: read-only
OBJECT-GROUP    

ciscoWan3gMIBNotificationGroup 1.3.6.1.4.1.9.9.661.2.2.4
A collection of objects for Cellular WAN notifications. ciscoWan3gMIBNotificationGroup object is superseded by ciscoWan3gMIBNotificationGroupRev1.
Status: deprecated Access: read-only
NOTIFICATION-GROUP    

ciscoWan3gMIBLbsObjectGroup 1.3.6.1.4.1.9.9.661.2.2.5
A collection of common objects for Cellular Location Based Service.
Status: current Access: read-only
OBJECT-GROUP    

ciscoWan3gMIBSmsObjectGroup 1.3.6.1.4.1.9.9.661.2.2.6
A collection of common objects for Cellular Short Messaging Service.
Status: current Access: read-only
OBJECT-GROUP    

ciscoWan3gMIBNotificationGroupRev1 1.3.6.1.4.1.9.9.661.2.2.7
A collection of objects for Cellular WAN notifications.
Status: current Access: read-only
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor