CISCO-VISM-RSRC-PART-MIB

File: CISCO-VISM-RSRC-PART-MIB.mib (7949 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF BASIS-MIB
CISCOWAN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
MODULE-COMPLIANCE OBJECT-GROUP vismPort
ciscoWan

Defined Types

VismPortResPartCnfGrpEntry  
SEQUENCE    
  vismResPartPortNum Integer32
  vismResPartCtrlrNum INTEGER
  vismResPartRowStatus INTEGER
  vismResPartNumOfLcnAvail Integer32
  vismResPartLcnLow Integer32
  vismResPartLcnHigh Integer32
  vismResPartIngrPctBW Integer32
  vismResPartEgrPctBW Integer32
  vismResPartCtrlrID Integer32

Defined Values

ciscoVismRsrcPartMIB 1.3.6.1.4.1.351.150.93
The MIB module containing Port Resource Partition information for VISM service module.
MODULE-IDENTITY    

vismPortResPartCnfGrp 1.3.6.1.4.1.351.110.5.5.2.2
OBJECT IDENTIFIER    

vismPortResPartCnfGrpTable 1.3.6.1.4.1.351.110.5.5.2.2.1
The vismPortResPartCnfGrpTable contains the configuration of port resource partition. Currently this table contains a single row.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VismPortResPartCnfGrpEntry

vismPortResPartCnfGrpEntry 1.3.6.1.4.1.351.110.5.5.2.2.1.1
An entry for port resource partition.
Status: current Access: not-accessible
OBJECT-TYPE    
  VismPortResPartCnfGrpEntry  

vismResPartPortNum 1.3.6.1.4.1.351.110.5.5.2.2.1.1.1
This is the index to vismPortResPartCnfGrpTable. If PXM1(Processor Switch Module) is used on the shelf this object should be set to 1. For PXM1E this object should be set to 255.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

vismResPartCtrlrNum 1.3.6.1.4.1.351.110.5.5.2.2.1.1.2
This is index to vismPortResPartCnfGrpTable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER par(1), pnni(2), tag(3)  

vismResPartRowStatus 1.3.6.1.4.1.351.110.5.5.2.2.1.1.3
This will 'add', 'delete' or 'modify' the partition. To delete an entry, this object has to be set to 'del'. The resource partition can be deleted only after deleting all the connections Logical Channel Numbers(LCNs).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER add(1), del(2), mod(3)  

vismResPartNumOfLcnAvail 1.3.6.1.4.1.351.110.5.5.2.2.1.1.4
This represents number of LCNs available for this controller and this port. The default value for this object is chosen based on the object vismMode (defined in CISCO-VISM-MODULE-MIB MIB) :
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..380  

vismResPartLcnLow 1.3.6.1.4.1.351.110.5.5.2.2.1.1.5
This represents low end of reserved LCN. The LCN identifies the local VCI(Virtual Channel Identifier) value on the VISM when adding a connection.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 131..510  

vismResPartLcnHigh 1.3.6.1.4.1.351.110.5.5.2.2.1.1.6
This represents high end of reserved LCN. The LCN identifies the local VCI value on the VISM when adding a connection.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 131..510  

vismResPartIngrPctBW 1.3.6.1.4.1.351.110.5.5.2.2.1.1.7
The percentage of total ingress bandwidth reserved. Since we have only one LCN for VoIP(Voice Over IP), the value is 100.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

vismResPartEgrPctBW 1.3.6.1.4.1.351.110.5.5.2.2.1.1.8
The percentage of total egress bandwidth reserved Since we have only one LCN for VoIP, the value is 100.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

vismResPartCtrlrID 1.3.6.1.4.1.351.110.5.5.2.2.1.1.9
This is the controller identifier of the PNNI (Private Network to Network Interface) controller.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

ciscoVismRsrcPartMIBConformance 1.3.6.1.4.1.351.150.93.2
OBJECT IDENTIFIER    

ciscoVismRsrcPartMIBGroups 1.3.6.1.4.1.351.150.93.2.1
OBJECT IDENTIFIER    

ciscoVismRsrcPartMIBCompliances 1.3.6.1.4.1.351.150.93.2.2
OBJECT IDENTIFIER    

ciscoVismRsrcPartCompliance 1.3.6.1.4.1.351.150.93.2.2.1
The compliance statement for objects related to VISM Port Resource Partition configuration.
Status: current Access: read-write
MODULE-COMPLIANCE    

ciscoVismRsrcPartGroup 1.3.6.1.4.1.351.150.93.2.1.1
The collection of objects which are used to represent VISM Port Resource Partition configuration.
Status: current Access: read-write
OBJECT-GROUP