CISCO-MGX82XX-ENVMON-MIB

File: CISCO-MGX82XX-ENVMON-MIB.mib (8516 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF BASIS-MIB
CISCOWAN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
MODULE-COMPLIANCE OBJECT-GROUP basisAsm
ciscoWan

Defined Types

AsmAlarmEntry  
SEQUENCE    
  asmAlarmNum Integer32
  asmAlarmType INTEGER
  asmAlarmUnitNum Integer32
  asmAlarmThreshold Integer32
  asmAlarmSeverity INTEGER
  asmUnitMeasurable INTEGER
  asmUnitMeasuredValue Integer32
  asmPhysicalAlarmState Integer32
  asmClrButton INTEGER

Defined Values

ciscoMgx82xxEnvmonMIB 1.3.6.1.4.1.351.150.70
The MIB module to describe the status of the Environmental Monitoring devices in MGX82xx products.
MODULE-IDENTITY    

asmAlarmTable 1.3.6.1.4.1.351.110.1.2.1
The ASM Alarm table. The table size is given by the value of ASMNumOfValidEntries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AsmAlarmEntry

asmAlarmEntry 1.3.6.1.4.1.351.110.1.2.1.1
An entry in the Basis ASM Alarm Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AsmAlarmEntry  

asmAlarmNum 1.3.6.1.4.1.351.110.1.2.1.1.1
This object is the identifier of a ASM alarm entry. The Alarm is further identified by the objects ASMAlarmType & ASMAlarmUnitNum.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

asmAlarmType 1.3.6.1.4.1.351.110.1.2.1.1.2
The value for this object indicates the type of device for which alarm is applicable. The possible values are : alarmOther (1) : Other than specified below alarmTemperature(2) : Temperature sensor alarmPSU (3) : Power Supply Unit alarmDCLevel (4) : DC Level Sensor alarmFanUnit (5) : FAN speed sensor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER alarmOther(1), alarmTemperature(2), alarmPSU(3), alarmDCLevel(4), alarmFanUnit(5)  

asmAlarmUnitNum 1.3.6.1.4.1.351.110.1.2.1.1.3
This object identifies one unit among a number of identical units represented in this table having the same asmAlarmType.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

asmAlarmThreshold 1.3.6.1.4.1.351.110.1.2.1.1.4
This object specifies the threshold beyond which the alarmable unit is said to be in an abnormal state.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

asmAlarmSeverity 1.3.6.1.4.1.351.110.1.2.1.1.5
This variable specifies the severity of the alarm to be declared when the asmAlarmThreshold specified is exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER alarmMinor(1), alarmMajor(2)  

asmUnitMeasurable 1.3.6.1.4.1.351.110.1.2.1.1.6
This object indicates if the alarm unit is measurable by the switch/system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

asmUnitMeasuredValue 1.3.6.1.4.1.351.110.1.2.1.1.7
This object gives the measured value of the entity addressed by asmAlarmNum. The value in this object is valid only if asmUnitMeasurable is set to 'yes'. This object contains value zero for asmUnitMeasurable value of 'no'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

asmPhysicalAlarmState 1.3.6.1.4.1.351.110.1.2.1.1.8
This object indicates the status of the ASM alarm represented in this entry. It is a bitmap where a set bit indicates an abnormal condition. A reset bit signifies normal operation.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

asmClrButton 1.3.6.1.4.1.351.110.1.2.1.1.9
This object when set to asmAlarmClear(2),causes the alarm to be cleared.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER asmAlarmNoAction(1), asmAlarmClear(2)  

asmNumOfValidEntries 1.3.6.1.4.1.351.110.1.2.2
The number of valid asmAlarmTable entries (regardless of how many are actually configured) in the table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

asmShelfAlarmState 1.3.6.1.4.1.351.110.1.2.3
This object indicates whether any Shelf/Node Alarm has been declared in the system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER alarmOff(1), alarmOn(2)  

cmEnvmonMIBConformance 1.3.6.1.4.1.351.150.70.2
OBJECT IDENTIFIER    

cmEnvmonMIBGroups 1.3.6.1.4.1.351.150.70.2.1
OBJECT IDENTIFIER    

cmEnvmonMIBCompliances 1.3.6.1.4.1.351.150.70.2.2
OBJECT IDENTIFIER    

cmEnvmonCompliance 1.3.6.1.4.1.351.150.70.2.2.1
The compliance statement for objects related to MGX82xx Environmental monitoring MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

cmEnvmonInfoGroup 1.3.6.1.4.1.351.150.70.2.1.1
The collection of objects which are used for providing information on environmental monitoring devices.
Status: current Access: read-only
OBJECT-GROUP    

cmEnvmonGeneralGroup 1.3.6.1.4.1.351.150.70.2.1.2
The collection of objects which are used for providing information on shelf level objects related to environmental monitoring devices.
Status: current Access: read-only
OBJECT-GROUP