CISCO-LWAPP-HA-MIB

File: CISCO-LWAPP-HA-MIB.mib (16686 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
INET-ADDRESS-MIB CISCO-TC SNMP-FRAMEWORK-MIB
RFC1213-MIB CISCO-SMI CISCO-RF-MIB

Imported symbols

MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
Unsigned32 IpAddress OBJECT-GROUP
NOTIFICATION-GROUP TruthValue TimeStamp
MacAddress RowStatus InetAddressType
InetAddress CiscoURLString SnmpAdminString
Counter32 sysName ciscoMgmt
cRFStatusPeerUnitState cRFStatusUnitState

Defined Types

CLHaNetworkRoutePeerConfigEntry  
SEQUENCE    
  cLHaNetworkRoutePeerIPAddressType InetAddressType
  cLHaNetworkRoutePeerIPAddress InetAddress
  cLHaNetworkRoutePeerIPNetmaskType InetAddressType
  cLHaNetworkRoutePeerIPNetmask InetAddress
  cLHaNetworkRoutePeerGatewayType InetAddressType
  cLHaNetworkRoutePeerGateway InetAddress
  cLHaNetworkRoutePeerTransferStatus INTEGER
  cLHaNetworkRoutePeerRowStatus RowStatus

Defined Values

ciscoLwappHaMIB 1.3.6.1.4.1.9.9.198888
This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. This MIB is used to show and configure High availability (HA) related statistics. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node, Mobile Station(Ms) and client are used interchangeably. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol
MODULE-IDENTITY    

ciscoLwappHaMIBObjects 1.3.6.1.4.1.9.9.198888.0
OBJECT IDENTIFIER    

ciscoLwappHaGlobalConfig 1.3.6.1.4.1.9.9.198888.0.1
OBJECT IDENTIFIER    

ciscoLwappHaNetworkConfig 1.3.6.1.4.1.9.9.198888.0.2
OBJECT IDENTIFIER    

ciscoLwappHaMIBNotifs 1.3.6.1.4.1.9.9.198888.0.3
OBJECT IDENTIFIER    

cLHaApSsoConfig 1.3.6.1.4.1.9.9.198888.0.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cLHaPeerIpAddressType 1.3.6.1.4.1.9.9.198888.0.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

cLHaPeerIpAddress 1.3.6.1.4.1.9.9.198888.0.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

cLHaServicePortPeerIpAddressType 1.3.6.1.4.1.9.9.198888.0.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

cLHaServicePortPeerIpAddress 1.3.6.1.4.1.9.9.198888.0.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

cLHaServicePortPeerIpNetMaskType 1.3.6.1.4.1.9.9.198888.0.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

cLHaServicePortPeerIpNetMask 1.3.6.1.4.1.9.9.198888.0.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

cLHaRedundancyIpAddressType 1.3.6.1.4.1.9.9.198888.0.1.8
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cLHaRedundancyIpAddress 1.3.6.1.4.1.9.9.198888.0.1.9
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

cLHaPeerMacAddress 1.3.6.1.4.1.9.9.198888.0.1.10
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

cLHaVirtualMacAddress 1.3.6.1.4.1.9.9.198888.0.1.11
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

cLHaPrimaryUnit 1.3.6.1.4.1.9.9.198888.0.1.12
Indicates whether this is the primary redundant unit or not. If this unit is the primary unit, this object is true. If this unit is the secondary unit, this object is false.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cLHaLinkEncryption 1.3.6.1.4.1.9.9.198888.0.1.13
Indicates whether link encryption is enabled or not.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cLHaNetworkFailOver 1.3.6.1.4.1.9.9.198888.0.1.14
Indicates whether network failover is enabled or not.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cLHaRFStatusUnitIp 1.3.6.1.4.1.9.9.198888.0.1.15
The description of the ip address of unit
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

cLHaNetworkRoutePeerConfigTable 1.3.6.1.4.1.9.9.198888.0.2.1
A table of the switch's Network Route Peer entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CLHaNetworkRoutePeerConfigEntry

cLHaNetworkRoutePeerConfigEntry 1.3.6.1.4.1.9.9.198888.0.2.1.1
Switch's Network Route Peer entry
Status: current Access: not-accessible
OBJECT-TYPE    
  CLHaNetworkRoutePeerConfigEntry  

cLHaNetworkRoutePeerIPAddressType 1.3.6.1.4.1.9.9.198888.0.2.1.1.1
Network Route IP Address type of the standby.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

cLHaNetworkRoutePeerIPAddress 1.3.6.1.4.1.9.9.198888.0.2.1.1.2
Network Route IP Address of the standby.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

cLHaNetworkRoutePeerIPNetmaskType 1.3.6.1.4.1.9.9.198888.0.2.1.1.3
Network Route IP Netmask type of the standby.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

cLHaNetworkRoutePeerIPNetmask 1.3.6.1.4.1.9.9.198888.0.2.1.1.4
Network Route IP Netmask of the standby.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

cLHaNetworkRoutePeerGatewayType 1.3.6.1.4.1.9.9.198888.0.2.1.1.5
Network Route IP Gateway type of the standby.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

cLHaNetworkRoutePeerGateway 1.3.6.1.4.1.9.9.198888.0.2.1.1.6
Network Route IP Gateway of the standby.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

cLHaNetworkRoutePeerTransferStatus 1.3.6.1.4.1.9.9.198888.0.2.1.1.7
Network Route transfer status from standby.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER initiate(1), inProgress(2), success(3), failure(4), timeout(5)  

cLHaNetworkRoutePeerRowStatus 1.3.6.1.4.1.9.9.198888.0.2.1.1.8
Network Route Peer Row Status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ciscoLwappHaNotificationVariable 1.3.6.1.4.1.9.9.198888.0.4
OBJECT IDENTIFIER    

cLHaSecondaryControllerUsageTrapType 1.3.6.1.4.1.9.9.198888.0.4.1
This object represents the usage of secondary controller. After the usuage of 90 days, one trap is generated per day for over usage. usageStart - start of secondary controller usage. usageComplete - completion of secondary controller usage period of 90 days. overUsage - Secondary controller overusage.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER usageStart(1), usageComplete(2), overUsage(3)  

cLHaSecondaryControllerUsageDayCounter 1.3.6.1.4.1.9.9.198888.0.4.2
This object represents the number of days the secondary controller is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cLHaSecondaryControllerUsageTrap 1.3.6.1.4.1.9.9.198888.0.3.1
This notification is sent on the event of a generic failure between the active and standby unit
Status: current Access: read-only
NOTIFICATION-TYPE    

cLHaRFSwapInfoTrap 1.3.6.1.4.1.9.9.198888.0.3.2
The notification is sent by the active redundant unit whenever its RF state changes or the RF state of the peer unit changes. To avoid a flurry of notifications for all state transitions, notifications will only be sent for transitions to the following RF states: disabled (for the peer state) standbyCold standbyHot active activeExtraload
Status: current Access: read-only
NOTIFICATION-TYPE