CISCO-LWAPP-DOT11-CCX-CLIENT-MIB

File: CISCO-LWAPP-DOT11-CCX-CLIENT-MIB.mib (38608 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
CISCO-TC	CISCO-LWAPP-DOT11-CLIENT-MIB	CISCO-SMI

Imported symbols

Counter32	Integer32	MODULE-IDENTITY
OBJECT-TYPE	Unsigned32	MODULE-COMPLIANCE
OBJECT-GROUP	MacAddress	TruthValue
RowStatus	TimeStamp	TEXTUAL-CONVENTION
CiscoMilliSeconds	cldcClientMacAddress	ciscoLwappDot11ClientCcxMIBObjects
ciscoMgmt

Defined Types

CcxEventLogResponseStatus
This attribute represents the response of the ccx event log request.
TEXTUAL-CONVENTION
	INTEGER	ccx-event-log-successful(1), ccx-event-log-refused(2), ccx-event-log-incapable(3)

CcxEventLogDialogToken
This attribute represents the token generated for the request sent to a client.
TEXTUAL-CONVENTION
	Unsigned32

CldccEventLogsRequestEntry
SEQUENCE
	cldccEventLogsRequestLogType	BITS
	cldccEventLogsRequestRowStatus	RowStatus

CldccSysLogsEntry
SEQUENCE
	cldccSysLogsIndex	Unsigned32
	cldccSysLogsTimeStamp	TimeStamp
	cldccSysLogsBuffer	OCTET STRING

CldccRoamingLogsEntry
SEQUENCE
	cldccRoamingLogsIndex	Unsigned32
	cldccRoamingLogsTimeStamp	TimeStamp
	cldccRoamingLogsTargetSSID	MacAddress
	cldccRoamingLogsSourceSSID	MacAddress
	cldccRoamingLogsTransitionTime	CiscoMilliSeconds
	cldccRoamingLogsTransitionReason	INTEGER
	cldccRoamingLogsTransitionResult	INTEGER

CldccRsnaDataEntry
SEQUENCE
	cldccRsnaDataIndex	Unsigned32
	cldccRsnaDataTimeStamp	TimeStamp
	cldccRsnaDataVersion	Unsigned32
	cldccRsnaDataTargetSSID	MacAddress
	cldccRsnaDataAuthType	INTEGER
	cldccRsnaDataResult	INTEGER
	cldccRsnaDataElemMultiCastOuis	OCTET STRING
	cldccRsnaDataElemUnicastCastOuis	OCTET STRING
	cldccRsnaDataElemAuthOuis	OCTET STRING
	cldccRsnaDataElemCapabilities	Unsigned32

CldccStatsReqEntry
SEQUENCE
	cldccStatsReqStatus	INTEGER
	cldccStatsReqGroupId	INTEGER
	cldccStatsReqDuration	CiscoMilliSeconds
	cldccStatsReqRowStatus	RowStatus

CldccStatsDot11RespEntry
SEQUENCE
	cldccStatsRespTransmittedFragmentCount	Counter32
	cldccStatsRespMulticastTransmittedFrameCount	Counter32
	cldccStatsRespFailedCount	Counter32
	cldccStatsRespRetryCount	Counter32
	cldccStatsRespMultipleRetryCount	Counter32
	cldccStatsRespFrameDuplicateCount	Counter32
	cldccStatsRespRtsSuccessCount	Counter32
	cldccStatsRespRtsFailureCount	Counter32
	cldccStatsRespAckFailureCount	Counter32
	cldccStatsRespReceivedFragmentCount	Counter32
	cldccStatsRespMulticastReceivedFrameCount	Counter32
	cldccStatsRespFcsErrorCount	Counter32
	cldccStatsRespTransmittedFrameCount	Counter32

CldccStatsSecurityRespEntry
SEQUENCE
	cldccStatsRespSelectedPairwiseCipher	Counter32
	cldccStatsRespTkipIcvErrors	Counter32
	cldccStatsRespTkipLocalMicFailures	Counter32
	cldccStatsRespCcmpReplays	Counter32
	cldccStatsRespCcmpDecrypErrors	Counter32
	cldccStatsRespTkipReplays	Counter32
	cldccStatsRespMgmtStatsTkipIcvErrors	Counter32
	cldccStatsRespMgmtStatsTkipLocalMicFailures	Counter32
	cldccStatsRespMgmtStatsCcmpReplays	Counter32
	cldccStatsRespMgmtStatsCcmpDecryptErrors	Counter32
	cldccStatsRespMgmtStatsTkipReplays	Counter32
	cldccStatsRespMgmtStatsTkipMhdrErrors	Counter32
	cldccStatsRespMgmtStatsCcmpMhdrErrors	Counter32
	cldccStatsRespMgmtStatsBroadcastDisassociateCount	Counter32
	cldccStatsRespMgmtStatsBroadcastDeauthenticateCount	Counter32
	cldccStatsRespMgmtStatsBroadcastActionFrameCount	Counter32

CldccEventLogStatusEntry
SEQUENCE
	cldccRoamingLogsResponseStatus	CcxEventLogResponseStatus
	cldccRsnaLogsResponseStatus	CcxEventLogResponseStatus
	cldccSysLogsResponseStatus	CcxEventLogResponseStatus

Defined Values

ciscoLwappDot11CcxClientMIB		1.3.6.1.4.1.9.9.599.3.3
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol (LWAPP) tunnel from Light-weight Access Points. Link Test is performed to learn the backhaul link quality between two mesh neighboring mesh nodes. The arrangement of the controller (referred to as CC in the diagram) and mesh nodes (RAP and MAP) LWAPP APs ,client(MN) and NMS appear as follows. +.......+ +.......+ + + + + + NMS + + NMS + + + + + +.......+ +.......+ . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + RAP + + RAP + + RAP + + RAP + + RAP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MAP + + MN + + MAP + + MAP + + MAP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . .. . . . . .. . . . . .. . . . . . . +......+ +......+ +......+ +......+. +......+ + + + + + + + + + + + MAP + + MAP + + MAP + + MAP + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. The controllers and the IDS systems exchange information through Cisco proprietary event exchange mechanisms. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity is also referred to as 'controller'. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node and client are used interchangeably. Network Management System ( NMS ) The station from which the administrator manages the wired and wireless networks. Mesh Node A mesh node is defined as a physical or logical entity in the mesh network participating in forming the mesh backhaul. There are two types of mesh nodes supported in Cisco mesh network:RAP and MAP. Root AP (RAP) The AP forming the bridge between a wired and a mesh network with an Ethernet interface to the wired network and a 802.11 radio interface to the mesh network Mesh AP (MAP). The AP extending wireless coverage similar to a repeater in a mesh network and consists of a 802.11 uplink and a 802.11 downlink. On a single-radio backhaul, both uplink and downlink exist on the same radio and are logical links only. On a multi-radio backhaul, they may exist on different radios.MAP APs associates directly with RAP APs or with another MAP AP. Each association of AP (MAP-MAP or RAP-MAP) with another AP forms parent-child relationship. Mesh Network Network starting with the wireless backhaul downlink of the RAP and all the entities below except any attached network to the Ethernet link of MAPs. A mesh network below a single RAP is also referred to as a 'Mesh Sector'.A mesh network consists of mesh nodes. A single mesh network is always augmented to a single wired network. Mesh Link A logical 802.11 link between two mesh nodes. A single link is point-to-point. All point-to-multipoint links are considered as multiple mesh links. Often referred to as mesh backhaul link. Mesh Backhaul A Mesh backhaul consists of mesh nodes and mesh links terminating at a RAP. This necessarily creates a one- to-one relationship between a 'mesh network', 'mesh sector' and a 'mesh backhaul' where these terms can be used interchangeably. SNR Signal to Noise ratio on the 802.11 radio. Bridged network The bridged network is defined as the network(s) attached to the Ethernet port of any MAP. There can be multiple such networks attached to a single mesh network. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol
MODULE-IDENTITY

ciscoLwappDot11CcxClientMIBObjects		1.3.6.1.4.1.9.9.599.3.3.0
OBJECT IDENTIFIER

ciscoClientCcxEventLogRequest		1.3.6.1.4.1.9.9.599.3.3.0.1
OBJECT IDENTIFIER

ciscoClientCcxEventLogResponse		1.3.6.1.4.1.9.9.599.3.3.0.2
OBJECT IDENTIFIER

ciscoClientCcxEventLogStatus		1.3.6.1.4.1.9.9.599.3.3.0.3
OBJECT IDENTIFIER

ciscoClientCcxStatsRequest		1.3.6.1.4.1.9.9.599.3.3.0.4
OBJECT IDENTIFIER

ciscoClientCcxStatsResponse		1.3.6.1.4.1.9.9.599.3.3.0.5
OBJECT IDENTIFIER

cldccEventLogsRequestTable		1.3.6.1.4.1.9.9.599.3.3.0.1.1
This table contains list of clients to which the event log request has been sent for fetching the logs. The table has a column corresponding to the type of logs to be fetched for each client.The current logs supported are Roaming, RSNA and Syslog.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccEventLogsRequestEntry

cldccEventLogsRequestEntry		1.3.6.1.4.1.9.9.599.3.3.0.1.1.1
There is an entry in the table where entry is identified by the client Mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccEventLogsRequestEntry

cldccEventLogsRequestLogType		1.3.6.1.4.1.9.9.599.3.3.0.1.1.1.1
This is the type of the logs which is required from the client.This can be Roaming,RSNA or Syslogs.
Status: current	Access: read-write
OBJECT-TYPE
	BITS	roaming(0), rsna(1), syslog(2)

cldccEventLogsRequestRowStatus		1.3.6.1.4.1.9.9.599.3.3.0.1.1.1.2
This field is used to add/remove entries from this table.To add a row in this table, createAndGo row status will be used.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

cldccSysLogsTable		1.3.6.1.4.1.9.9.599.3.3.0.2.1
This table contains Sys logs of the various ccxv5 clients.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccSysLogsEntry

cldccSysLogsEntry		1.3.6.1.4.1.9.9.599.3.3.0.2.1.1
There is an entry in the table for each entry identified by the client mac address and dialog token.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccSysLogsEntry

cldccSysLogsIndex		1.3.6.1.4.1.9.9.599.3.3.0.2.1.1.1
This object stores the dialog token exchanged between client and controller for the give sys log request.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccSysLogsTimeStamp		1.3.6.1.4.1.9.9.599.3.3.0.2.1.1.3
This object stores the time stamp when the syslog messages were generated.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

cldccSysLogsBuffer		1.3.6.1.4.1.9.9.599.3.3.0.2.1.1.4
This stores the syslog messages generated on the client side.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(256)

cldccRoamingLogsTable		1.3.6.1.4.1.9.9.599.3.3.0.2.2
This table contains Roaming logs of the clients.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccRoamingLogsEntry

cldccRoamingLogsEntry		1.3.6.1.4.1.9.9.599.3.3.0.2.2.1
There is an entry in the table for where each entry is identified by the client mac address and dialog token.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccRoamingLogsEntry

cldccRoamingLogsIndex		1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.1
This is the index of the roaming logs.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cldccRoamingLogsTimeStamp		1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.2
This is the time stamp of the log.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

cldccRoamingLogsTargetSSID		1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.3
This is the BSSID of the AP that is target of the attempted transition.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

cldccRoamingLogsSourceSSID		1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.4
This is the BSSID of the associated AP prior to transition.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

cldccRoamingLogsTransitionTime		1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.5
This is the difference from last time a frame could have been transmitted on the source BSS to the time when a non-802.1x data frame can be attempted on the target BSS.
Status: current	Access: read-only
OBJECT-TYPE
	CiscoMilliSeconds

cldccRoamingLogsTransitionReason		1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.6
This field indicates the reason why a transition attempt occurred.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal-roam-poor-link(1), normal-roam-load-bal(2), insufficient-capacity(3), inf-directed-roam(4), first-association-to-wlan(5), roaming-from-cellular(6), roaming-to-cellular(7), normal-roam-better-ap(8), disassociated-or-deauthenticated(9), failed-8021x-eap-auth(10), failed-8021x-4way-handshake(11), many-replay-counters(12), many-data-mic-failures(13), many-mgt-mic-failures(14), max-retransmissions-excedded(15), excessive-interference(16), many-broadcast-disassociations(17), many-broadcast-deauth(18)

cldccRoamingLogsTransitionResult		1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.7
This field shows the results of the attempted transition.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..51

cldccRsnaDataTable		1.3.6.1.4.1.9.9.599.3.3.0.2.3
This table contains Rsna data logs of the clients.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccRsnaDataEntry

cldccRsnaDataEntry		1.3.6.1.4.1.9.9.599.3.3.0.2.3.1
There is an entry in the table for where each entry is identified by the client mac address and dialog token.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccRsnaDataEntry

cldccRsnaDataIndex		1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.1
This is the index of the Rsna Data.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccRsnaDataTimeStamp		1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.2
This object stores the time stamp when the rsna data were generated.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

cldccRsnaDataVersion		1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.3
This is the RSNA Data Version.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cldccRsnaDataTargetSSID		1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.4
This is the BSSID of the AP that is targeted.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

cldccRsnaDataAuthType		1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.5
This attribute represents the authentication type used.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ccx-dot1x-leap(0), ccx-dot1x-eap-fast(1), ccx-dot1x-eap-tls(2), ccx-dot1x-eap-ttls(3), ccx-dot1x-peap-v0(4), ccx-dot1x-peap-v1(5), ccx-dot1x-eap-md5(6), ccx-dot1x-eap-sim(7), ccx-dot1x-psk(8), ccx-dot1x-unknown(255)

cldccRsnaDataResult		1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.6
This attribute stores the result of the RSNA Data.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

cldccRsnaDataElemMultiCastOuis		1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.7
This attribute represents the multicast ouis of a RSNA element.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

cldccRsnaDataElemUnicastCastOuis		1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.8
This field represents the unicast ouis of a RSNA element.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

cldccRsnaDataElemAuthOuis		1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.9
This field represents the auth ouis of a RSNA element.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

cldccRsnaDataElemCapabilities		1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.10
This field represents the capabilities of the RSNA element .
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cldccStatsReqTable		1.3.6.1.4.1.9.9.599.3.3.0.4.1
This table contains the stats req for the ccx clients.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccStatsReqEntry

cldccStatsReqEntry		1.3.6.1.4.1.9.9.599.3.3.0.4.1.1
There is an entry in the table where entry is identified by the client Mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccStatsReqEntry

cldccStatsReqStatus		1.3.6.1.4.1.9.9.599.3.3.0.4.1.1.1
There is an entry in the table where entry is identified by the client Mac address.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	incapable(0), refused(1), invalid-state(2), failure(3), success(4), inprogress(5)

cldccStatsReqGroupId		1.3.6.1.4.1.9.9.599.3.3.0.4.1.1.2
There is an entry in the table where entry is identified by the client Mac address.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dot11-meas(0), security-meas(1)

cldccStatsReqDuration		1.3.6.1.4.1.9.9.599.3.3.0.4.1.1.3
This field represents the duration of the measurement.
Status: current	Access: read-write
OBJECT-TYPE
	CiscoMilliSeconds

cldccStatsReqRowStatus		1.3.6.1.4.1.9.9.599.3.3.0.4.1.1.4
This field is used to add/remove entries from this table.To add a row in this table, createAndGo row status will be used.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

cldccStatsDot11RespTable		1.3.6.1.4.1.9.9.599.3.3.0.5.1
This table contains the stats response for the ccx clients.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccStatsDot11RespEntry

cldccStatsDot11RespEntry		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1
There is an entry in the table where entry is identified by the client Mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccStatsDot11RespEntry

cldccStatsRespTransmittedFragmentCount		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.1
This field represents the transmitted fragment count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespMulticastTransmittedFrameCount		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.2
This field represents the multicast transmitted frame count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespFailedCount		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.3
This field represents the failed count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespRetryCount		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.4
This field represents the duplicate frame count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespMultipleRetryCount		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.5
This field represents the retry count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespFrameDuplicateCount		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.6
This field represents the duplicate frame count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespRtsSuccessCount		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.7
This field represents the RTS success count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespRtsFailureCount		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.8
This field represents the RTS failure count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespAckFailureCount		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.9
This field represents the ack failure count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespReceivedFragmentCount		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.10
This field represents the received fragment count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespMulticastReceivedFrameCount		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.11
This field represents the multicast received frame count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespFcsErrorCount		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.12
This field represents the fcs error count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespTransmittedFrameCount		1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.13
This field represents the transmitted frame count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsSecurityRespTable		1.3.6.1.4.1.9.9.599.3.3.0.5.2
This table contains the stats response for the ccx clients.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccStatsSecurityRespEntry

cldccStatsSecurityRespEntry		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1
There is an entry in the table where entry is identified by the client Mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccStatsSecurityRespEntry

cldccStatsRespSelectedPairwiseCipher		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.1
This field represents the pairwise cipher.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespTkipIcvErrors		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.2
This field represents the tkip icv error count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespTkipLocalMicFailures		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.3
This field represents the local tkip mic failure count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespCcmpReplays		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.4
This field represents the ccmp replay count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespCcmpDecrypErrors		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.5
This field represents the CCMP decrypt error count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespTkipReplays		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.6
This field represents the tkip replay count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespMgmtStatsTkipIcvErrors		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.7
This field represents the tkip icv error count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespMgmtStatsTkipLocalMicFailures		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.8
This field represents the tkip local mic failure count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespMgmtStatsCcmpReplays		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.9
This field represents the CCMP replay count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespMgmtStatsCcmpDecryptErrors		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.10
This field represents the Ccmp decrypt error count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespMgmtStatsTkipReplays		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.11
This field represents the tkip replay count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespMgmtStatsTkipMhdrErrors		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.12
This field represents the tkip mhdr error count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespMgmtStatsCcmpMhdrErrors		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.13
This field represents the Ccmp Mhdr error count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespMgmtStatsBroadcastDisassociateCount		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.14
This field represents the broadcast disassociate count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespMgmtStatsBroadcastDeauthenticateCount		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.15
This field represents the broadcast deauthenticate count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccStatsRespMgmtStatsBroadcastActionFrameCount		1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.16
This field represents the broadcast action frame count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cldccEventLogStatusTable		1.3.6.1.4.1.9.9.599.3.3.0.3.1
This table contains response status of the various event log requests sent from the controller.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccEventLogStatusEntry

cldccEventLogStatusEntry		1.3.6.1.4.1.9.9.599.3.3.0.3.1.1
There is an entry in the table for each entry identified by the client mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccEventLogStatusEntry

cldccRoamingLogsResponseStatus		1.3.6.1.4.1.9.9.599.3.3.0.3.1.1.1
This is the status of roaming log request.
Status: current	Access: read-only
OBJECT-TYPE
	CcxEventLogResponseStatus

cldccRsnaLogsResponseStatus		1.3.6.1.4.1.9.9.599.3.3.0.3.1.1.2
This is the status of rsna log request.
Status: current	Access: read-only
OBJECT-TYPE
	CcxEventLogResponseStatus

cldccSysLogsResponseStatus		1.3.6.1.4.1.9.9.599.3.3.0.3.1.1.3
This is the status of sys log request.
Status: current	Access: read-only
OBJECT-TYPE
	CcxEventLogResponseStatus

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor