CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB

File: CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB.mib (50429 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
INET-ADDRESS-MIB CISCO-TC CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIB
CISCO-LWAPP-DOT11-CLIENT-MIB CISCO-SMI

Imported symbols

Integer32 MODULE-IDENTITY OBJECT-TYPE
Unsigned32 MODULE-COMPLIANCE OBJECT-GROUP
MacAddress TruthValue RowStatus
TimeStamp TEXTUAL-CONVENTION InetAddressType
InetAddress CiscoMilliSeconds CiscoLwappDot11ClientAuthMethod
CLDot11ClientDiagAssocReason cldcClientMacAddress ciscoLwappDot11ClientCcxMIBObjects
ciscoMgmt

Defined Types

CiscoLwappCcxDiagResponseStatus  
This attribute represents the response status of the ccx diag tests.
TEXTUAL-CONVENTION    
  INTEGER successful(0), fail(1), refused(3), incapable(4), unknown(5)  

CiscoLwappCcxDiagTestStatus  
This attribute represents the last test status of the ccx diag tests.
TEXTUAL-CONVENTION    
  INTEGER successful(0), pending(1), timeout(3), stopped(4), mismatch(5)  

CiscoLwappDot11ClientDot1xCredential  
This attribute represents the dotx credential identifier.
TEXTUAL-CONVENTION    
  INTEGER pre-sharedkey(0), username-password(1), xdot(2), other-cert(3), one-time-password(4), secure-id-token(5), none(255)  

CiscoLwappDot11ClientAbortTestReason  
This attribute represents the reason for abortion of ccx diag test.
TEXTUAL-CONVENTION    
  INTEGER reserved(0), timeout(1), cancelled-by-operator(2)  

CiscoLwappDot11ClientInitiateTest  
This attribute says whether the test is to be started or aborted.
TEXTUAL-CONVENTION    
  INTEGER initiate-test(1), abort-test(2)  

CldccDiagDhcpTestReqEntry  
SEQUENCE    
  cldccDiagDhcpTestReqRowStatus RowStatus

CldccDiagDhcpTestRespEntry  
SEQUENCE    
  cldccDiagDhcpTestRespDhcpOffer OCTET STRING

CldccDiagPingTestReqEntry  
SEQUENCE    
  cldccDiagPingTestType INTEGER
  cldccDiagPingTestReqRowStatus RowStatus

CldccDiagPingTestRespEntry  
SEQUENCE    
  cldccDiagPingTestRespIPAddressType InetAddressType
  cldccDiagPingTestRespIPAddress InetAddress
  cldccDiagPingTestRespDestMacAddress MacAddress
  cldccDiagPingTestRespPingsSent Unsigned32
  cldccDiagPingTestRespPingsReceived Unsigned32
  cldccDiagPingTestRespMaxEchoTIme CiscoMilliSeconds
  cldccDiagPingTestRespMinEchoTIme CiscoMilliSeconds

CldccDiagDnsNameResolTestReqEntry  
SEQUENCE    
  cldccDiagDnsNameResolTestReqNetworkName OCTET STRING
  cldccDiagDnsNameResolTestReqRowStatus RowStatus

CldccDiagDnsNameResolTestRespEntry  
SEQUENCE    
  cldccDiagDnsNameResolTestRespIpAddressType InetAddressType
  cldccDiagDnsNameResolTestRespIpAddress InetAddress
  cldccDiagDnsNameResolTestRespServerName OCTET STRING

CldccDiagAssociationTestReqEntry  
SEQUENCE    
  cldccDiagAssocTestReqBssid MacAddress
  cldccDiagAssocTestReqSsid OCTET STRING
  cldccDiagAssocTestReqChannel INTEGER
  cldccDiagAssocTestReqBand INTEGER
  cldccDiagAssocTestReqPhyType INTEGER
  cldccDiagAssocTestReqRowStatus RowStatus

CldccDiagAssociationTestRespEntry  
SEQUENCE    
  cldccDiagAssociationTestRespIsAssocComplete TruthValue
  cldccDiagAssocTestRespReturnedStatus Unsigned32

CldccDiagAuthenticationTestReqEntry  
SEQUENCE    
  cldccDiagAuthenticationTestReqBssid MacAddress
  cldccDiagAuthenticationTestReqProfileId Unsigned32
  cldccDiagAuthenticationTestReqChannel INTEGER
  cldccDiagAuthenticationTestReqBand INTEGER
  cldccDiagAuthenticationTestReqPhyType INTEGER
  cldccDiagAuthenticationTestReqRowStatus RowStatus

CldccDiagAuthenticationTestRespEntry  
SEQUENCE    
  cldccDiagAuthenticationTestRespIsCompleted TruthValue
  cldccDiagAuthenticationTestRespReturnedStatus INTEGER
  cldccDiagAuthenticationTestRespEAPMethod OCTET STRING

CldccDiagMsgDisplayReqEntry  
SEQUENCE    
  cldccDiagMsgDisplayMsgType INTEGER
  cldccDiagMsgDisplayReqRowStatus RowStatus

CldccDiagProfileRedirectReqEntry  
SEQUENCE    
  cldccDiagProfileRedirectReqProfileId Unsigned32
  cldccDiagProfileRedirectReqRowStatus RowStatus

CldccDiagMsgDisplayRespEntry  
SEQUENCE    
  cldccDiagMsgDisplayRespString OCTET STRING

CldccDiagTestLoggedFrameEntry  
SEQUENCE    
  cldccDiagTestLoggedFrameIndex Unsigned32
  cldccDiagTestLoggedFrameDirection INTEGER
  cldccDiagTestLoggedFrameTimeStamp TimeStamp
  cldccDiagTestLoggedFrameData OCTET STRING

CldccDiagTestStatusEntry  
SEQUENCE    
  cldccDiagTestLastTestStatus CiscoLwappCcxDiagTestStatus
  cldccDiagTestLastResponseStatus CiscoLwappCcxDiagResponseStatus

Defined Values

ciscoLwappDot11CcxClientDiagMIB 1.3.6.1.4.1.9.9.599.3.2
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol (LWAPP) tunnel from Light-weight Access Points. Link Test is performed to learn the backhaul link quality between two mesh neighboring mesh nodes. The arrangement of the controller (referred to as CC in the diagram) and mesh nodes (RAP and MAP) LWAPP APs ,client(MN) and NMS appear as follows. +.......+ +.......+ + + + + + NMS + + NMS + + + + + +.......+ +.......+ . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + RAP + + RAP + + RAP + + RAP + + RAP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MAP + + MN + + MAP + + MAP + + MAP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . .. . . . . .. . . . . .. . . . . . . +......+ +......+ +......+ +......+. +......+ + + + + + + + + + + + MAP + + MAP + + MAP + + MAP + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. The controllers and the IDS systems exchange information through Cisco proprietary event exchange mechanisms. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity is also referred to as 'controller'. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node and client are used interchangeably. Network Management System ( NMS ) The station from which the administrator manages the wired and wireless networks. Mesh Node A mesh node is defined as a physical or logical entity in the mesh network participating in forming the mesh backhaul. There are two types of mesh nodes supported in Cisco mesh network:RAP and MAP. Root AP (RAP) The AP forming the bridge between a wired and a mesh network with an Ethernet interface to the wired network and a 802.11 radio interface to the mesh network Mesh AP (MAP). The AP extending wireless coverage similar to a repeater in a mesh network and consists of a 802.11 uplink and a 802.11 downlink. On a single-radio backhaul, both uplink and downlink exist on the same radio and are logical links only. On a multi-radio backhaul, they may exist on different radios.MAP APs associates directly with RAP APs or with another MAP AP. Each association of AP (MAP-MAP or RAP-MAP) with another AP forms parent-child relationship. Mesh Network Network starting with the wireless backhaul downlink of the RAP and all the entities below except any attached network to the Ethernet link of MAPs. A mesh network below a single RAP is also referred to as a 'Mesh Sector'.A mesh network consists of mesh nodes. A single mesh network is always augmented to a single wired network. Mesh Link A logical 802.11 link between two mesh nodes. A single link is point-to-point. All point-to-multipoint links are considered as multiple mesh links. Often referred to as mesh backhaul link. Mesh Backhaul A Mesh backhaul consists of mesh nodes and mesh links terminating at a RAP. This necessarily creates a one- to-one relationship between a 'mesh network', 'mesh sector' and a 'mesh backhaul' where these terms can be used interchangeably. SNR Signal to Noise ratio on the 802.11 radio. Bridged network The bridged network is defined as the network(s) attached to the Ethernet port of any MAP. There can be multiple such networks attached to a single mesh network. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol
MODULE-IDENTITY    

ciscoLwappDot11CcxClientDiagMIBObjects 1.3.6.1.4.1.9.9.599.3.2.0
OBJECT IDENTIFIER    

ciscoLwappDot11CcxClientDiagMIBNotifs 1.3.6.1.4.1.9.9.599.3.2.1
OBJECT IDENTIFIER    

ciscoLwappDot11CcxClientDiagMIBNotifObjs 1.3.6.1.4.1.9.9.599.3.2.2
OBJECT IDENTIFIER    

ciscoClientCcxDiagRequest 1.3.6.1.4.1.9.9.599.3.2.0.1
OBJECT IDENTIFIER    

ciscoClientCcxDiagResponse 1.3.6.1.4.1.9.9.599.3.2.0.2
OBJECT IDENTIFIER    

ciscoClientCcxDiagStatus 1.3.6.1.4.1.9.9.599.3.2.0.3
OBJECT IDENTIFIER    

cldccDiagDhcpTestReqTable 1.3.6.1.4.1.9.9.599.3.2.0.1.1
This table contains request params for dhcp test to be performed by the client.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagDhcpTestReqEntry

cldccDiagDhcpTestReqEntry 1.3.6.1.4.1.9.9.599.3.2.0.1.1.1
There is an entry in the table identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagDhcpTestReqEntry  

cldccDiagDhcpTestReqRowStatus 1.3.6.1.4.1.9.9.599.3.2.0.1.1.1.1
This field is used to add/remove entries from this table.To add a row in this table, createAndGo row status will be used.To remove a row, this field will be set to destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cldccDiagDhcpTestRespTable 1.3.6.1.4.1.9.9.599.3.2.0.2.1
This table contains response for dhcp test performed by the client.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagDhcpTestRespEntry

cldccDiagDhcpTestRespEntry 1.3.6.1.4.1.9.9.599.3.2.0.2.1.1
There is an entry in the table identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagDhcpTestRespEntry  

cldccDiagDhcpTestRespDhcpOffer 1.3.6.1.4.1.9.9.599.3.2.0.2.1.1.1
This field will have the complete set of DHCP options returned in the DHCP Offer.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

cldccDiagPingTestReqTable 1.3.6.1.4.1.9.9.599.3.2.0.1.2
This table contains the parameters for DNS ping test request.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagPingTestReqEntry

cldccDiagPingTestReqEntry 1.3.6.1.4.1.9.9.599.3.2.0.1.2.1
There is an entry in the table where each entry is identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagPingTestReqEntry  

cldccDiagPingTestType 1.3.6.1.4.1.9.9.599.3.2.0.1.2.1.1
This field is used to distinguish the type of test.It can be a ping to the dns server or the default gateway.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dns-server(1), default-gw(2)  

cldccDiagPingTestReqRowStatus 1.3.6.1.4.1.9.9.599.3.2.0.1.2.1.2
This field is used to add/remove entries from this table.To add a row in this table, createAndGo row status will be used.To remove a row, this field will be set to destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cldccDiagPingTestRespTable 1.3.6.1.4.1.9.9.599.3.2.0.2.2
This table contains response for Dns ping test request.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagPingTestRespEntry

cldccDiagPingTestRespEntry 1.3.6.1.4.1.9.9.599.3.2.0.2.2.2
There is an entry in the table where each entry is identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagPingTestRespEntry  

cldccDiagPingTestRespIPAddressType 1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.1
The value of this field shall be the IP address type of the destination of the ICMP echo request frames.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cldccDiagPingTestRespIPAddress 1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.2
The value of this field shall be the IP address of the destination of the ICMP Echo Request frames.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

cldccDiagPingTestRespDestMacAddress 1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.3
The value of this field shall be the MAC address of the destination of the ICMP Echo Request frames.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

cldccDiagPingTestRespPingsSent 1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.4
The value of this field shall be the number of ICMP Echo Request frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cldccDiagPingTestRespPingsReceived 1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.5
The value of this field shall be the number of ICMP Echo Response frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cldccDiagPingTestRespMinEchoTIme 1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.6
The value of this field shall be the shortest time,in milliseconds, between the transmission of an ICMP echo request frame and the receipt of the corresponding ICMP Echo Response frame.
Status: current Access: read-only
OBJECT-TYPE    
  CiscoMilliSeconds  

cldccDiagPingTestRespMaxEchoTIme 1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.7
The value of this field shall be the longest time in milliseconds,between the transmission of an ICMP echo Request between the transmission of an ICMP echo request frame and the receipt of the corresponding ICMP echo response frame. ICMP echo request frames for which no corresponding response is received shall be ignored in the determination of this value.
Status: current Access: read-only
OBJECT-TYPE    
  CiscoMilliSeconds  

cldccDiagDnsNameResolTestReqTable 1.3.6.1.4.1.9.9.599.3.2.0.1.3
This table contains Dns Name resolution request params to be used for sending out a Diagnostic request to a client for resolving a network name.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagDnsNameResolTestReqEntry

cldccDiagDnsNameResolTestReqEntry 1.3.6.1.4.1.9.9.599.3.2.0.1.3.1
There is an entry in the table where each entry is identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagDnsNameResolTestReqEntry  

cldccDiagDnsNameResolTestReqNetworkName 1.3.6.1.4.1.9.9.599.3.2.0.1.3.1.1
This is the name of the network which will be resolved by the client and the result reported to the controller.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

cldccDiagDnsNameResolTestReqRowStatus 1.3.6.1.4.1.9.9.599.3.2.0.1.3.1.2
This field is used to add/remove entries from this table.To add a row in this table, createAndGo row status will be used.To remove a row, this field will be set to destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cldccDiagDnsNameResolTestRespTable 1.3.6.1.4.1.9.9.599.3.2.0.2.3
This table contains Dns Name Resolution test results sent by the client to the controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagDnsNameResolTestRespEntry

cldccDiagDnsNameResolTestRespEntry 1.3.6.1.4.1.9.9.599.3.2.0.2.3.1
There is an entry in the table where each entry is identified by a client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagDnsNameResolTestRespEntry  

cldccDiagDnsNameResolTestRespIpAddressType 1.3.6.1.4.1.9.9.599.3.2.0.2.3.1.1
This is type of the ip address of the DNS server whose name was sent in the request.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cldccDiagDnsNameResolTestRespIpAddress 1.3.6.1.4.1.9.9.599.3.2.0.2.3.1.2
This is the ip address of the DNS server whose name was sent in the request.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

cldccDiagDnsNameResolTestRespServerName 1.3.6.1.4.1.9.9.599.3.2.0.2.3.1.3
This is the name of the server whose ip address was resolved.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

cldccDiagAssociationTestReqTable 1.3.6.1.4.1.9.9.599.3.2.0.1.4
This table contains association test request values for various clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagAssociationTestReqEntry

cldccDiagAssociationTestReqEntry 1.3.6.1.4.1.9.9.599.3.2.0.1.4.1
There is an entry in the table for each entry identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagAssociationTestReqEntry  

cldccDiagAssocTestReqBssid 1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.1
This is the bssid of the AP which the client has to try connecting to as a part of association test.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

cldccDiagAssocTestReqSsid 1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.2
This is the name of the SSID which the client has to try connecting to as a part of association test.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

cldccDiagAssocTestReqChannel 1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.3
This is channel number on which the client will try to connect to the AP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

cldccDiagAssocTestReqBand 1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.4
This is band on which the client will try to connect to the AP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

cldccDiagAssocTestReqPhyType 1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.5
This is phy type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

cldccDiagAssocTestReqRowStatus 1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.6
This field is used to add/remove entries from this table.To add a row in this table, createAndGo row status will be used.To remove a row, this field will be set to destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cldccDiagAssociationTestRespTable 1.3.6.1.4.1.9.9.599.3.2.0.2.4
This table contains association test response values for various clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagAssociationTestRespEntry

cldccDiagAssociationTestRespEntry 1.3.6.1.4.1.9.9.599.3.2.0.2.4.4
There is an entry in the table for each entry identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagAssociationTestRespEntry  

cldccDiagAssociationTestRespIsAssocComplete 1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.1
Value of this field shall be 1 if the 802.11 association concluded normally,0 otherwise.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cldccDiagAssocTestRespReturnedStatus 1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.2
Value of this field shall be the value returned in the final 802.11 association response frame during the test.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cldccDiagAuthenticationTestReqTable 1.3.6.1.4.1.9.9.599.3.2.0.1.5
This table contains association test request values for various clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagAuthenticationTestReqEntry

cldccDiagAuthenticationTestReqEntry 1.3.6.1.4.1.9.9.599.3.2.0.1.5.1
There is an entry in the table for each entry identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagAuthenticationTestReqEntry  

cldccDiagAuthenticationTestReqBssid 1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.1
This is the name of the AP which the client has to try connecting to as a part of authentication test.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

cldccDiagAuthenticationTestReqProfileId 1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.2
This is the name of the ProfileId which the client has to try connecting to as a part of authentication test.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

cldccDiagAuthenticationTestReqChannel 1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.3
This attribute represents the channel number.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

cldccDiagAuthenticationTestReqBand 1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.5
This attribute represents the band.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

cldccDiagAuthenticationTestReqPhyType 1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.6
This attribute represents the phy type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

cldccDiagAuthenticationTestReqRowStatus 1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.9
This field is used to add/remove entries from this table.To add a row in this table,createAndGo row status will be used.To remove a row, this field will be set to destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cldccDiagAuthenticationTestRespTable 1.3.6.1.4.1.9.9.599.3.2.0.2.5
This table contains authentication test response values for various clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagAuthenticationTestRespEntry

cldccDiagAuthenticationTestRespEntry 1.3.6.1.4.1.9.9.599.3.2.0.2.5.5
There is an entry in the table for each entry identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagAuthenticationTestRespEntry  

cldccDiagAuthenticationTestRespIsCompleted 1.3.6.1.4.1.9.9.599.3.2.0.2.5.5.1
Value of this field shall be 1 if the 802.11 association concluded normally,0 otherwise.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cldccDiagAuthenticationTestRespReturnedStatus 1.3.6.1.4.1.9.9.599.3.2.0.2.5.5.2
Value of this field shall be the value returned in the final 802.11 authentication response frame during the test
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

cldccDiagAuthenticationTestRespEAPMethod 1.3.6.1.4.1.9.9.599.3.2.0.2.5.5.3
Value of this field shall be the EAP method returned in the final 802.11 authentication response frame during the test.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

cldccDiagMsgDisplayReqTable 1.3.6.1.4.1.9.9.599.3.2.0.1.6
This table contains message display request values for various clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagMsgDisplayReqEntry

cldccDiagMsgDisplayReqEntry 1.3.6.1.4.1.9.9.599.3.2.0.1.6.1
There is an entry in the table for each entry identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagMsgDisplayReqEntry  

cldccDiagMsgDisplayMsgType 1.3.6.1.4.1.9.9.599.3.2.0.1.6.1.1
This attribute represents the type of message to be displayed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid-ssid(1), invalid-network-settings(2), wlan-capability-mismatch(3), bad-credentials(4), call-support(5), problem-resolved(6), resolution-incomplete(7), try-again-later(8), user-action-required(9), trouble-shooting-refused-by-network(10), retrieving-client-reports(11), retrieving-client-logs(12), retrieval-complete(13), begining-association-test(14), begining-dhcp-test(15), begining-network-connectivity-test(16), begining-dns-ping-test(17), begining-name-resolution-test(18), begining-dot1x-test(19), redirecting-client-to-a-profile(20), test-complete(21), test-passed(22), test-failed(23), cancel-diag-channel-operation(24), log-retrieval-refused(25), client-report-retrieval-refused(26), test-request-refused-by-client(27), invalid-network-address(28), known-problem-with-network(29), scheduled-maint-period(30), wlan-security-incorrect(31), waln-encryption-incorrect(32), wlan-auth-incorrect(33)  

cldccDiagMsgDisplayReqRowStatus 1.3.6.1.4.1.9.9.599.3.2.0.1.6.1.2
This field is used to add/remove entries from this table. To add a row in this table, createAndGo row status will be used.To remove a row, this field will be set to destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cldccDiagProfileRedirectReqTable 1.3.6.1.4.1.9.9.599.3.2.0.1.7
This table contains profile redirect request values for various clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagProfileRedirectReqEntry

cldccDiagProfileRedirectReqEntry 1.3.6.1.4.1.9.9.599.3.2.0.1.7.1
There is an entry in the table for each entry identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagProfileRedirectReqEntry  

cldccDiagProfileRedirectReqProfileId 1.3.6.1.4.1.9.9.599.3.2.0.1.7.1.1
This attribute represents the profile Id to which the client should be redirected.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

cldccDiagProfileRedirectReqRowStatus 1.3.6.1.4.1.9.9.599.3.2.0.1.7.1.2
This field is used to add/remove entries from this table. To add a row in this table, createAndGo row status will be used.To remove a row, this field will be set to destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cldccDiagMsgDisplayRespTable 1.3.6.1.4.1.9.9.599.3.2.0.2.6
This table contains message display request values for various clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagMsgDisplayRespEntry

cldccDiagMsgDisplayRespEntry 1.3.6.1.4.1.9.9.599.3.2.0.2.6.1
There is an entry in the table for each entry identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagMsgDisplayRespEntry  

cldccDiagMsgDisplayRespString 1.3.6.1.4.1.9.9.599.3.2.0.2.6.1.1
This is string which was sent to the client for display.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

cldccDiagTestLoggedFrameTable 1.3.6.1.4.1.9.9.599.3.2.0.2.8
This table contains logged frame data.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagTestLoggedFrameEntry

cldccDiagTestLoggedFrameEntry 1.3.6.1.4.1.9.9.599.3.2.0.2.8.1
There is an entry in the table where each entry is identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagTestLoggedFrameEntry  

cldccDiagTestLoggedFrameIndex 1.3.6.1.4.1.9.9.599.3.2.0.2.8.1.1
The value of this field shall be the ordinal value of the logged frame.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cldccDiagTestLoggedFrameDirection 1.3.6.1.4.1.9.9.599.3.2.0.2.8.1.2
The value of this field shall be zero, when the logged frame in the Frame Content field is sent from (transmitted by) the client. It shall be one, otherwise.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(0), down(1)  

cldccDiagTestLoggedFrameTimeStamp 1.3.6.1.4.1.9.9.599.3.2.0.2.8.1.3
The value of this field shall be the timestamp value of the logged frame.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cldccDiagTestLoggedFrameData 1.3.6.1.4.1.9.9.599.3.2.0.2.8.1.4
The value of this field shall be the actual frame that was transmitted or received.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..4096)  

cldccDiagTestStatusTable 1.3.6.1.4.1.9.9.599.3.2.0.3.1
This table contains the status params for all the tests performed on the client.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CldccDiagTestStatusEntry

cldccDiagTestStatusEntry 1.3.6.1.4.1.9.9.599.3.2.0.3.1.1
There is an entry in the table identified by the client mac address.
Status: current Access: not-accessible
OBJECT-TYPE    
  CldccDiagTestStatusEntry  

cldccDiagTestLastTestStatus 1.3.6.1.4.1.9.9.599.3.2.0.3.1.1.1
This field is used to represent the status of the last test performed.
Status: current Access: read-only
OBJECT-TYPE    
  CiscoLwappCcxDiagTestStatus  

cldccDiagTestLastResponseStatus 1.3.6.1.4.1.9.9.599.3.2.0.3.1.1.2
This field is used to represent the response of the last test performed.
Status: current Access: read-only
OBJECT-TYPE    
  CiscoLwappCcxDiagResponseStatus  

cldccDiagClientMacAddress 1.3.6.1.4.1.9.9.599.3.2.2.1
This object indicates the macaddress of the client associated to the diagnostic WLAN.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

cldccDiagAssocReasonCode 1.3.6.1.4.1.9.9.599.3.2.2.2
This object indicates the reason code for which the client has associated the diagnostic WLAN.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CLDot11ClientDiagAssocReason  

cldccDiagClientAssociatedToDiagWlan 1.3.6.1.4.1.9.9.599.3.2.1.1
This notification is generated when a client associates to a diagnostic WLAN.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor