CISCO-LES-MIB

File: CISCO-LES-MIB.mib (31093 bytes)

Imported modules

CISCO-SMI SNMPv2-SMI LAN-EMULATION-CLIENT-MIB
CISCO-BUS-MIB SNMPv2-CONF SNMPv2-TC

Imported symbols

ciscoMgmt MODULE-IDENTITY OBJECT-TYPE
Counter32 Integer32 AtmLaneAddress
CiscoVpiInteger CiscoVciInteger MODULE-COMPLIANCE
OBJECT-GROUP RowStatus DisplayString
MacAddress TimeStamp

Defined Types

LesEntry  
SEQUENCE    
  lesElanName DisplayString
  lesIndex Integer32
  lesAtmAddrSpec AtmLaneAddress
  lesAtmAddrMask OCTET STRING
  lesAtmAddrActual AtmLaneAddress
  lesIfIndex Integer32
  lesSubIfNum Integer32
  lesColocBusAtmAddrSpec AtmLaneAddress
  lesColocBusAtmAddrMask OCTET STRING
  lesColocBusAtmAddrActl AtmLaneAddress
  lesUpTime TimeStamp
  lesLanType INTEGER
  lesMaxFrm INTEGER
  lesJoinTimeout INTEGER
  lesLecsAtmAddr AtmLaneAddress
  lesControlDistVpi CiscoVpiInteger
  lesControlDistVci CiscoVciInteger
  lesOperStatus INTEGER
  lesAdminStatus INTEGER
  lesStatus RowStatus
  lesSegmentID INTEGER

LesStatsEntry  
SEQUENCE    
  lesInErrors Counter32
  lesInErrorLastLec AtmLaneAddress
  lesInFlushReplies Counter32
  lesInJoinReqs Counter32
  lesOutJoinFails Counter32
  lesJoinLastFailCause Integer32
  lesJoinLastFailLec AtmLaneAddress
  lesOutConfigReqs Counter32
  lesInConfigResps Counter32
  lesInConfigFails Counter32
  lesInRegisReqs Counter32
  lesOutRegisFails Counter32
  lesRegisLastFailCause Integer32
  lesRegisLastFailLec AtmLaneAddress
  lesInUnregReqs Counter32
  lesInLearpUcasts Counter32
  lesInLearpBroadcasts Counter32
  lesOutLearpFwd Counter32
  lesInLearpResps Counter32
  lesInNarpReqs Counter32
  lesInTopolReqs Counter32

LesClientEntry  
SEQUENCE    
  lesClientLecid INTEGER
  lesClientAtmAddr AtmLaneAddress
  lesClientState INTEGER
  lesClientIfIndex Integer32
  lesClientControlVpi CiscoVpiInteger
  lesClientControlVci CiscoVciInteger
  lesClientStatus RowStatus

LesMacRegEntry  
SEQUENCE    
  lesMacRegMacAddress MacAddress
  lesMacRegAtmAddr AtmLaneAddress
  lesMacRegLecid INTEGER

LesRDRegEntry  
SEQUENCE    
  lesRDRegSegmentId INTEGER
  lesRDRegBridgeNum INTEGER
  lesRDRegAtmAddr AtmLaneAddress
  lesRDRegLecid INTEGER

Defined Values

ciscoLesMIB 1.3.6.1.4.1.9.9.39
The MIB module for the management of LANE Service in Cisco devices.
MODULE-IDENTITY    

ciscoLesMIBObjects 1.3.6.1.4.1.9.9.39.1
OBJECT IDENTIFIER    

les 1.3.6.1.4.1.9.9.39.1.1
OBJECT IDENTIFIER    

leClient 1.3.6.1.4.1.9.9.39.1.2
OBJECT IDENTIFIER    

register 1.3.6.1.4.1.9.9.39.1.3
OBJECT IDENTIFIER    

lesTable 1.3.6.1.4.1.9.9.39.1.1.1
A (conceptual) table containing all instances of LESs on this device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LesEntry

lesEntry 1.3.6.1.4.1.9.9.39.1.1.1.1
An entry (conceptual row) in the lesTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  LesEntry  

lesElanName 1.3.6.1.4.1.9.9.39.1.1.1.1.1
The name associated with the emulated LAN which this LES services.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..32)  

lesIndex 1.3.6.1.4.1.9.9.39.1.1.1.1.2
A unique identifier for this LES servicing this ELAN. This value must remain constant while the entry is in existence and during the operation of the agent (i.e. It is allowed to change after reboot). For implementations that do not allow more than one LES entity per ELAN per device, it is sufficient to always report 1 for this object and to only accept one for row creation.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

lesAtmAddrSpec 1.3.6.1.4.1.9.9.39.1.1.1.1.3
The ATM address of the designated LES. Note that setting this object will have the side effect of reinitializing the LES and consequently dropping all clients connected to it. If this object is not specified at row creation time then the LES will choose a value for itself and attempt to register with the switch with that value. If an address is specified which is not acceptable to the switch then the lesOperStatus will remain inactive until an acceptable address is set.
Status: current Access: read-create
OBJECT-TYPE    
  AtmLaneAddress  

lesAtmAddrMask 1.3.6.1.4.1.9.9.39.1.1.1.1.4
An address mask that when used with the lesAtmAddrSpec specifies the portion of the LES' ATM address that is desired to be configured. Note that setting this object will result in the reinitialization of the LES,consequently dropping all clients connected to it. Note that this object cannot be set at row creation time without also supplying a value for the lesAtmAddrSpec object. If the LES ATM address is omitted at creation time then this object defaults to the value of all zeros (none of the lesAtmAddrSpec value is relevant). If the LES ATM address is specified at creation time but this object omitted, then this object defaults to the value of all ones (all of the lesAtmAddrSpec is relevant).
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0|20)  

lesAtmAddrActual 1.3.6.1.4.1.9.9.39.1.1.1.1.5
The resultant ATM address in use by the LES. This object is a product of the specified ATM address, mask and interaction with the switch via the ILMI.
Status: current Access: read-only
OBJECT-TYPE    
  AtmLaneAddress  

lesIfIndex 1.3.6.1.4.1.9.9.39.1.1.1.1.6
The interface that a LES will receive control connections on. The value specified for this object must equate to a value of ifIndex in the ifTable. The interface will be for that particular ATM port (the physical interface, not a logical layer on top of it). This object can only be specified upon row creation and cannot be altered there after.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

lesSubIfNum 1.3.6.1.4.1.9.9.39.1.1.1.1.7
Specifies the sub-interface number that the LES will reside on. This sub-interface may be shared with a LEC or BUS of the same ELAN but is not required to do so. If no value is specified for this object at row creation time, then a sub-interface will be chosen by the agent. This object may only be specified at row creation time and cannot be altered thereafter.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

lesColocBusAtmAddrSpec 1.3.6.1.4.1.9.9.39.1.1.1.1.8
For those implementations who do not allow the separate creation/deletion of the LES and BUS this object allows the operator to specify the ATM address of the BUS at LES creation time. For implementations that allow separate process creation this object is optional. Otherwise this is the ATM address of the designated BUS. Note that setting this object will have the side effect of reinitializing the BUS and consequently dropping all clients connected to it. If this object is not specified at row creation time then the BUS will choose a value for itself and attempt to register with the switch with that value. If an address is specified which is not acceptable to the switch then the busOperStatus will remain inactive until an acceptable address is set.
Status: current Access: read-create
OBJECT-TYPE    
  AtmLaneAddress  

lesColocBusAtmAddrMask 1.3.6.1.4.1.9.9.39.1.1.1.1.9
An address mask that when used with the lesColocatedBusAtmAddr specifies the portion of the BUS' ATM address desired by management. Note that setting this object will have the side effect of reinitializing the BUS and consequently dropping all clients connected to it. Note that this object cannot be set at row creation time without also supplying a value for the lesColocBusAtmAddrSpec object. If the BUS ATM address is omitted at creation time then this object defaults to the value of all zeros (none of the lesColocBusAtmAddrSpec value is relevant). If the BUS ATM address is specified at creation time but this object omitted, then this object defaults to the value of all ones (all of the lesColocBusAtmAddrSpec is relevant).
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0|20)  

lesColocBusAtmAddrActl 1.3.6.1.4.1.9.9.39.1.1.1.1.10
The ATM address in use by the BUS. This object is a product of the specified ATM address, its mask and interaction with the switch through the ILMI.
Status: current Access: read-only
OBJECT-TYPE    
  AtmLaneAddress  

lesUpTime 1.3.6.1.4.1.9.9.39.1.1.1.1.11
The value of sysUpTime when this LES became activated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

lesLanType 1.3.6.1.4.1.9.9.39.1.1.1.1.12
The type of legacy LAN that this LES emulates.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dot3(1), dot5(2)  

lesMaxFrm 1.3.6.1.4.1.9.9.39.1.1.1.1.13
The maximum frame size that the specified LAN type can accept.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dot3(1516), tr4Mb(4544), rfc1626(9234), tr16Mb(18190)  

lesJoinTimeout 1.3.6.1.4.1.9.9.39.1.1.1.1.14
The number of seconds that must elapse before a Join request can be timed-out.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10..300  

lesLecsAtmAddr 1.3.6.1.4.1.9.9.39.1.1.1.1.15
The ATM address associated with the LECS used by this LES. If no LECS is in use by the LES then this object will have the value of all 0's (i.e 0x0000...). If it is desired that the LES get the address of the LECS through the ILMI then this object may be left unspecified at row activation. If the ILMI fails then the lesOperStatus will be inactive(2) and this column still not present.
Status: current Access: read-create
OBJECT-TYPE    
  AtmLaneAddress  

lesControlDistVpi 1.3.6.1.4.1.9.9.39.1.1.1.1.16
The virtual path identifier of the control distribute VCC to all clients, if it exits.
Status: current Access: read-only
OBJECT-TYPE    
  CiscoVpiInteger  

lesControlDistVci 1.3.6.1.4.1.9.9.39.1.1.1.1.17
The virtual channel identifier of the control distribute VCC to all clients, if it exists.
Status: current Access: read-only
OBJECT-TYPE    
  CiscoVciInteger  

lesOperStatus 1.3.6.1.4.1.9.9.39.1.1.1.1.18
This object reflects the actual state of the LES which may differ from that of the lesAdminStatus object. This can occur when the interface ifOperStatus is 'down' but the corresponding lesAdminStatus is 'active'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

lesAdminStatus 1.3.6.1.4.1.9.9.39.1.1.1.1.19
The desired state of the designated LES as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being reflected in the lesOperStatus.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

lesStatus 1.3.6.1.4.1.9.9.39.1.1.1.1.20
The status of this entry (conceptual row). This row cannot be set to active until an appropiate value of lesIfIndex has been specified.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

lesSegmentID 1.3.6.1.4.1.9.9.39.1.1.1.1.21
The segment ID of the emulated LAN this LES is servicing. This object is only valid if the lesLanType is dot5(2).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4095  

lesStatsTable 1.3.6.1.4.1.9.9.39.1.1.2
A (conceptual) table of statistics associated with LES instances on the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LesStatsEntry

lesStatsEntry 1.3.6.1.4.1.9.9.39.1.1.2.1
A (conceptual) row in the lesStatsTable which corresponds to the statistics kept by a particular instance of a LES.
Status: current Access: not-accessible
OBJECT-TYPE    
  LesStatsEntry  

lesInErrors 1.3.6.1.4.1.9.9.39.1.1.2.1.1
The number of frames received by the LES which were either malformed or did not follow standard protocol (i.e. receiving a LE-ARP request for a multicast address).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesInErrorLastLec 1.3.6.1.4.1.9.9.39.1.1.2.1.2
The ATM address of the LE client whose last frame to the LES resulted in an increment to the lesInErrors counter.
Status: current Access: read-only
OBJECT-TYPE    
  AtmLaneAddress  

lesInFlushReplies 1.3.6.1.4.1.9.9.39.1.1.2.1.3
The number of Flush replies that have been received by the LES and forwarded onto its clients.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesInJoinReqs 1.3.6.1.4.1.9.9.39.1.1.2.1.4
The number of LE_JOIN_REQUESTs received by this LES since activation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesOutJoinFails 1.3.6.1.4.1.9.9.39.1.1.2.1.5
The number of rejection LE_JOIN_RESPONSEs transmitted by this LES since activation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesJoinLastFailCause 1.3.6.1.4.1.9.9.39.1.1.2.1.6
The cause for the transmission of the last rejection LE_JOIN_RESPONSE. This is the value of the status field within the rejection response. If the server has never issued a rejection response then this object will have the value of 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lesJoinLastFailLec 1.3.6.1.4.1.9.9.39.1.1.2.1.7
The ATM address of the client whose last LE_JOIN_REQUEST resulted in a rejection by this server. If the server has never issued a rejection response then this object will have the value of all 0's (i.e. 0x000...).
Status: current Access: read-only
OBJECT-TYPE    
  AtmLaneAddress  

lesOutConfigReqs 1.3.6.1.4.1.9.9.39.1.1.2.1.8
The number of LE_CONFIGURE_REQUESTs sent by this LES since activation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesInConfigResps 1.3.6.1.4.1.9.9.39.1.1.2.1.9
The number of successful LE_CONFIGURE_RESPONSEs received by this LES since activation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesInConfigFails 1.3.6.1.4.1.9.9.39.1.1.2.1.10
The number of rejection LE_CONFIGURE_RESPONSEs received by this LES since activation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesInRegisReqs 1.3.6.1.4.1.9.9.39.1.1.2.1.11
The number of LE_REGISTER_REQUESTs received by this LES since activation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesOutRegisFails 1.3.6.1.4.1.9.9.39.1.1.2.1.12
The number of rejection LE_REGISTER_RESPONSEs transmitted by this LES since activation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesRegisLastFailCause 1.3.6.1.4.1.9.9.39.1.1.2.1.13
The cause for the transmission of the last rejection LE_REGISTER_RESPONSE. This variable has the value of the status field within the last failure register response. If the server has never issued a failed registration response then the value of this object shall be 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lesRegisLastFailLec 1.3.6.1.4.1.9.9.39.1.1.2.1.14
The ATM address of the client whose last LE_REGISTER_REQUEST to this LES resulted in failure. If the server has never issued a failed registration response then the value of this object shall be all 0's (i.e. x0000...).
Status: current Access: read-only
OBJECT-TYPE    
  AtmLaneAddress  

lesInUnregReqs 1.3.6.1.4.1.9.9.39.1.1.2.1.15
The number of valid LE_UNREGISTER_REQUESTs received by this LES since activation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesInLearpUcasts 1.3.6.1.4.1.9.9.39.1.1.2.1.16
The number of LE_ARP_REQUESTs received by this LES since activation and responded to directly. This applies to all LE_ARP requests for addresses registered by LE clients with the LES. Note that a LES is not required to answer LE_ARP requests directly and may forward the request on to the control distribute regardless. This counter does not apply to those requests the BUS (the broadcast address).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesInLearpBroadcasts 1.3.6.1.4.1.9.9.39.1.1.2.1.17
The number of LE_ARP_REQUEST received by the LES for the broadcast address. These requests are responded to with the BUS' ATM address.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesOutLearpFwd 1.3.6.1.4.1.9.9.39.1.1.2.1.18
The number of LE_ARP_REQUEST frames forwarded onto the control distribute VC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesInLearpResps 1.3.6.1.4.1.9.9.39.1.1.2.1.19
The number of LE_ARP_RESPONSEs received by this LES and forwarded onto the control distribute.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesInNarpReqs 1.3.6.1.4.1.9.9.39.1.1.2.1.20
The number of Negative LE_ARP requests received by this LES and forwarded on to the control distribute VC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesInTopolReqs 1.3.6.1.4.1.9.9.39.1.1.2.1.21
The number of LE_TOPOLOGY_REQUESTs received by this LES since activation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lesClientTable 1.3.6.1.4.1.9.9.39.1.2.1
A (conceptual) table listing the clients associated with a LES. Note that the local or network management will not create or destroy rows in this table but may only inspect what LECs are currently joined with the LES.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LesClientEntry

lesClientEntry 1.3.6.1.4.1.9.9.39.1.2.1.1
An entry (conceptual) row that denotes a client that is joined with the LES.
Status: current Access: not-accessible
OBJECT-TYPE    
  LesClientEntry  

lesClientLecid 1.3.6.1.4.1.9.9.39.1.2.1.1.1
The LECID selected for an LEC by the LES during the JOIN phase.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0001..65279  

lesClientAtmAddr 1.3.6.1.4.1.9.9.39.1.2.1.1.2
The primary ATM address associated with the designated LEC.
Status: current Access: read-only
OBJECT-TYPE    
  AtmLaneAddress  

lesClientState 1.3.6.1.4.1.9.9.39.1.2.1.1.3
The current state of the LEC. Note that busConnect is only a monitorable state if the BUS is colocated with the LES. In the event that it is not then the client state should proceed immediately to operational within this table (though it may not do so in actuality). Note that there is no relation between the client's internal state and the state reflected here. The state here is only the LES's observed state of the LEC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), joinRecv(2), verify(3), addLec(4), busConnect(5), operational(6), terminating(7)  

lesClientIfIndex 1.3.6.1.4.1.9.9.39.1.2.1.1.4
The interface of the bi-directional control direct connection between the LEC and LES.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lesClientControlVpi 1.3.6.1.4.1.9.9.39.1.2.1.1.5
The VPI of the bi-directional control direct connection between the LEC and LES.
Status: current Access: read-only
OBJECT-TYPE    
  CiscoVpiInteger  

lesClientControlVci 1.3.6.1.4.1.9.9.39.1.2.1.1.6
The VCI of the bi-directional control direct connection between the LEC and LES.
Status: current Access: read-only
OBJECT-TYPE    
  CiscoVciInteger  

lesClientStatus 1.3.6.1.4.1.9.9.39.1.2.1.1.7
The status of the (conceptual) row. Note that this object may only return the active(1) state. The only value which may be written to this object is the destroy(6) state which will cause the client to be dropped from the ELAN.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

lesMacRegTable 1.3.6.1.4.1.9.9.39.1.3.1
A (conceptual) table of MAC addresses registered with the LES by its clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LesMacRegEntry

lesMacRegEntry 1.3.6.1.4.1.9.9.39.1.3.1.1
An entry (conceptual row) that denotes a registered MAC address and the ATM address that corresponds to it.
Status: current Access: not-accessible
OBJECT-TYPE    
  LesMacRegEntry  

lesMacRegMacAddress 1.3.6.1.4.1.9.9.39.1.3.1.1.1
The MAC address of a registered client.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

lesMacRegAtmAddr 1.3.6.1.4.1.9.9.39.1.3.1.1.3
The ATM address of the LEC that corresponds to the registered MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  AtmLaneAddress  

lesMacRegLecid 1.3.6.1.4.1.9.9.39.1.3.1.1.4
The LECID of the client who registered the designated MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0001..65279  

lesRDRegTable 1.3.6.1.4.1.9.9.39.1.3.2
A (conceptual) table of Route Descriptors registered with the LES by its clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LesRDRegEntry

lesRDRegEntry 1.3.6.1.4.1.9.9.39.1.3.2.1
An entry (conceptual row) that denotes a registered Route Descriptor address and the ATM address that corresponds to it.
Status: current Access: not-accessible
OBJECT-TYPE    
  LesRDRegEntry  

lesRDRegSegmentId 1.3.6.1.4.1.9.9.39.1.3.2.1.1
The segment ID of a registered client.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..4095  

lesRDRegBridgeNum 1.3.6.1.4.1.9.9.39.1.3.2.1.2
The bridge number of a registered client going to the designated segment.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..15  

lesRDRegAtmAddr 1.3.6.1.4.1.9.9.39.1.3.2.1.3
The ATM address of the LEC that corresponds to the registered Route Descriptor.
Status: current Access: read-only
OBJECT-TYPE    
  AtmLaneAddress  

lesRDRegLecid 1.3.6.1.4.1.9.9.39.1.3.2.1.4
The LECID of the client who registered the designated Route Descriptor address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0001..65279  

ciscoLesMIBConformance 1.3.6.1.4.1.9.9.39.2
OBJECT IDENTIFIER    

ciscoLesMIBGroups 1.3.6.1.4.1.9.9.39.2.1
OBJECT IDENTIFIER    

ciscoLesMIBCompliances 1.3.6.1.4.1.9.9.39.2.2
OBJECT IDENTIFIER    

ciscoLesGroup 1.3.6.1.4.1.9.9.39.2.1.1
The core set of objects necessary to managing a LES.
Status: current Access: read-only
OBJECT-GROUP    

ciscoLesStatsGroup 1.3.6.1.4.1.9.9.39.2.1.2
The set of objects containing statistical information about a LES.
Status: current Access: read-only
OBJECT-GROUP    

ciscoLesColocatedGroup 1.3.6.1.4.1.9.9.39.2.1.3
The objects needed to supported collocated LANE service components.
Status: current Access: read-only
OBJECT-GROUP    

ciscoLesLecsGroup 1.3.6.1.4.1.9.9.39.2.1.4
The objects necessary for those LES implementations that use the LECS for LEC verification.
Status: current Access: read-only
OBJECT-GROUP    

ciscoLesCntrlDistGroup 1.3.6.1.4.1.9.9.39.2.1.5
The additional objects for LESs that support a point to multipoint control distribute VC.
Status: current Access: read-only
OBJECT-GROUP    

ciscoLesSubIfGroup 1.3.6.1.4.1.9.9.39.2.1.6
For those implementations that wish to tie their LE service components to an particular sub-interface.
Status: current Access: read-only
OBJECT-GROUP    

ciscoLesClientGroup 1.3.6.1.4.1.9.9.39.2.1.7
A collection of objects used for inspecting the clients requesting the attention/service of the LES.
Status: current Access: read-only
OBJECT-GROUP    

ciscoLesTokenRingGroup 1.3.6.1.4.1.9.9.39.2.1.8
A collection of objects used for managing LESs capable of emulated token rings.
Status: current Access: read-only
OBJECT-GROUP    

ciscoLesMIBCompliance 1.3.6.1.4.1.9.9.39.2.2.1
The compliance statement for SNMP entities that support Cisco's LES MIB.
Status: current Access: read-only
MODULE-COMPLIANCE