The optional features in the sytem.
ivr(1) - Inter VSAN Routing
fcip(2) - Fibre Channel over IP Protocol
fcsp(3) - Fibre Channel Security Protocol
ficon(4) - Fibre Connectivity interface
iscsi(5) - iSCSI (Internet Small Computer
System Interface) protocol
tacacs(6) - Tacacs+ AAA protocol
qosManager(7) - Quality Of Service
portSecurity(8) - Port Security
fabricBinding(9) - Fabric Binding
iscsiInterfaceVsanMembership(10) - iSCSI-Interface-VSAN
membership
ike(11) - Internet Key Exchange feature. This
is used to negotiate cryptographic
keys for IPsec traffic
isns(12) - iSNS (Internet Storage Name Service)
server. This provides name service,
access control and state change
notifications for iSCSI devices
ipsec(13) - IPSec security services on the device
portTracker(14) - Port Tracker. This allows ports to be
brought down and up based on changes
in the port states of certain
configured (tracked) ports
scheduler(15) - Scheduler feature provides jobs to be
scheduled at a specified time. A Job is
a collection of configuration commands
in the device.
npiv(16) - Nx_Port ID Virtualization. This is a
mechanism by which a N_Port can get more
than one Nx_Port_Id from the fibre
channel (FC) fabric
sanExtTuner(17) - SAN Extension Tuner. This is a tool
used to generate and analyze SCSI
workloads across the FCIP tunnels.
This can be used to tune the FCIP
tunnels for desired throughput.
dpvm(18) - Dynamic Port Vsan Membership. This
manages allocation of VSAN to a port
based on the device WWN at the time of
device FLOGI
extenedCredit(19) - Extended Credit feature. This provides
a way to increase the receive buffer
to buffer credits on physical FC Ports
cloudDiscovery(20)- This feature provides grouping
functionality of all the IP networks
connected to the various gigabit
ethernet interfaces in a 'Fabric'
isis(21) - IS-IS Unicast Routing Protocol
ospf(22) - Open Shortest Path First Unicast Routing
Protocol
ospfV3(23) - Open Shortest Path First Version 3 Unicast
Routing Protocol
rip(24) - Routing Information Protocol
bgp(25) - Border Gateway Protocol
pim(26) - Protocol Independent Multicast
igmp(27) - Internet Group Management Protocol
msdp(28) - Multicast Source Discovery Protocol
pim6(29) - Protocol Independent Multicast (PIM) for
IPv6
eigrp(30) - Enhanced Interior Gateway Routing Protocol
sdv(31) - SAN Device-Virtualization Manager
cluster(32) - This feature provides a common
infrastructure for distributed applications
running on multiple switches. It provides
consistency and replication of application
metadata. It also handles membership and
quorum service.
sme(33) - SME Daemon
lacp(34) - Link Aggregation Control Protocol
amt(35) - Auto-Multicast Tunneling
dot1x(36) - DOT1X Daemon
npv(37) - FC N_port Multiplexer allows multiple
end-devices on a switch which does not
require a domain_ID to login to a
NPIV-capable switch and thereby
communicate with other devices in the
fabric.
l2nac(38) - L2NAC Daemon
glbp(39) - Gateway Load Balancing Protocol. This
protocol provides support for gateway
redundancy and in load balancing traffic.
dhcpSnooping(40) - Handles dhcp snooping, IP source guard
and Dynamic ARP Inspection (DAI)
functionality.
hsrp(41) - The Hot Standby Router Protocol, HSRP,
provides a mechanism which is designed
to support non-disruptive failover of
IP traffic in certain circumstances.
In particular, the protocol protects
against the failure of the first hop
router when the source host cannot
learn the IP address of the first hop
router dynamically.
svi(42) - Switch Virtual Interface Manager
vmm(43) - Virtual Module Manager
pvlan(44) - Private Vlan Manager
tunnelManager(45) - Tunnel manager manages tunnel interfaces
which includes creation, configuration
and deletion of a tunnel interface.
ethPortSec(46) - Ethernet Port Security provides a MAC
based security feature for L2 ports.
lisp(47) - Locator ID Separation Protocol
trustSec(48) - Cisco TrustSec. Provides authentication,
authorization, encryption and SGACLs
(Security Group Access Control Lists).
copp(49) - Control Plane Policing.
udld(50) - Unidirectional link-detection to ensure
ethernet link is working properly
mcecm(51) - Multi-Chassis Ether-Channel Manager
pbr(52) - PBR uses route-maps to provide policy
based routing functionality.
nfm(53) - NetFlow provides a key set of services for
IP applications, including network traffic
accounting, usage-based network billing,
network planning, security, Denial of
Service monitoring capabilities, and
network monitoring. NetFlow provides
valuable information about network users
and applications, peak usage times, and
traffic routing.
isapi(54) - This service is a conditional service and
enables the various storage applications
running on the ISAPI (Intelligent Switch
API).
vrrp(55) - The Virtual Router Redundancy Protocol,
VRRP, provides a mechanism to eliminate
the single point of failure as present
in default static routed environments.
Redundancy is provided in using any of the
virtual router's IP addresses as the
default first hop router by hosts
in the LAN.
netSift(56) - Enable Netsift features of DPI (Deep Packet
Inspection) and measurements.
isisL2(57) - This feature implements the control
plane for DCE (Data Center Ethernet). It
provides both unicast and multicast routes
to the RIBs (Routing Information Bases) for
forwarding DCE frames.
cimServer(58) - CISCO's Web Based Enterprise Management
(WBEM) Services daemon process.
otv(59) - This feature is provides control plane
functionality for OTV (Overlay Transport
Virtualization).
sanTap(60) - SanTap is a fibre channel switch based
capability that provides a reliable copy
of the data flowing between a set of one
or more initiators and a set of one or
more targets connected to the fabric.
nasb(61) - The TPC (Third-party Copy) or NASB (Network
Accelerated Serverless Backup) feature
exposes a disk target with Logical Unit
Number(LUN) 0 that is capable of processing
the SCSI Extended Copy Command (XCOPY) to
transfer data from a specified source to a
specified destination.
dmm(62) - DMM (Data Migration Manager) facilitates
migration of data from one storage
subsystem to another.
u2rib(63) - Layer 2 unicast Routing Information Base
component.
isisOtv(64) - IS-IS protocol for OTV (Overlay Transport
Virtualization)
orib(65) - OTV (Overlay Transport Virtualization)
Routing Information Base
fcoe(66) - Fiber Channel over Ethernet.
siaServiceBroker(67) - Nexus Service Insertion Architecture.
evfp(68) - Trunking F_Ports and F_Port-Channels.
vtp(69) - Vlan Trunking Protocol
splitter(70) - FCoE (Fiber Channel over Ethernet) traffic
splitter
sfm(71) - SCSI (Small Computer serial interface) flow
manager used for enabling Fibre Channel
Write Acceleration on SSM (Storage Services
Module) cards
ioa(72) - This feature allows more flexible I/O
acceleration services such as write
acceleration or tape acceleration
telnetServer(73) - Telnet Server
sshServer(74) - SSH Server
httpServer(75) - HTTP Server
wccp(76) - Web Cache Communication Protocol for
Nexus7k
siaSve(77) - SIA Services Virtualization Endpoint
xcvrFreq (78) - X2 Transceiver Frequency configuration
assocMgr(79) - The feature enables VLAN <--> VSAN
translation and acts as a bridge between
LAN and SAN world. It manages the mappings
of VLANs with associated VSANs and
vice versa
lldp(80) - Link Layer Discovery Protocol
rsvp(81) - Implements the RSVP protocol that is
used to make resource reservations for
an application for example MPLS/TE
ldp(82) - MPLS Label Distribution Protocol
te(83) - MPLS Traffic Engineering
mplsOam(84) - MPLS Operations and Management
l2vpn(85) - Layer2 VPN
drap(86) - DRAP
bfd(87) - BFD
bfdApp(88) - BFD_APP
fex(89) - FEX
pong(90) - Layer 2 connectivity and latency
measurement tool based on 1588
constructs
rtp(91) - Real-time Transport Protocol
ldap(92) - Lightweight Directory Access Protocol
privilege(93) - Enable IOS like privilege support
for authorization
oim(94) - The interface manager for advanced
features like OTV, TE, mVPN etc
mplsMgr(95) - Manages general MPLS related functionality
ulib(96) - Unified label information base
responsible for the storage of
MPLS label forwarding information
scp(97) - scp protocal
sftp(98) - sftp protocal
l3vpn(99) - Layer 3 Virtual Private Networks
mvpn(101) - Provides multicast service if customer
sites are partitioned
ipPool(102) - Creates and manages the IP Address
uufb(103) - Unknown Unicast Flood Blocking
umfb(104) - Unknown Multicast Flood Blocking
ethernetNpv(105) - An enhanced form of FIP snooping over
an ethernet bridge connecting FCoE
hosts to FCoE FCF
wccpClient(106) - Web Cache Communication Protocol Client
Side
scadaGw(107) - scada protocol translations
poe(108) - Power over Ethernet
flexlink(109) - Manager process for switchport
backup feature
niv(110) - Network Interface Virtualization
vem(111) - Virtual Ethernet Module
ewise(112) - Energywise for N7K
onep(113) - Allows third parties to create
network applications
slaS(114) - SLA sender
slaR(115) - SLA receiver
rise(116) - rise feature enables tighter
integration with the Nexus 7000
for attached Cisco appliances that
support Remote Integrated Service
Extenders (RISE) functionality
pppManager(117) - Point-to-point protocol manager
creates and manages of Point-to-Point
protocol instances
itronMcastAgent(118) - This is a process listens for multicast
traffic and implement the itron specify
reliability protocol over smart grid RF
networks
vsmAggregation(119) - VSM aggregation feature on Cisco
Nexus 1000v enables multiple N1K
control planes to be combined to
manage a single DVS (distributed
virtual switch)
segmentation(120) - Vxlan feature on Cisco Nexus
1000v enables scalable cloud
architecture with replicated
server pods in different subnets.
It provides a means to stretch
a layer 2 network by using a
layer 2 overlay scheme over
a layer 3 network
vrrpv3(121) - The Virtual Router Redundancy
Protocol version 3, dynamically
assign responsibility for routing
to one of a group of routers
participating in the protocol.
VRRPv3 supports both IPv4 and IPv6
vTracker(122) - vTracker feature allows network-admin to view
and monitor the virtualized environment in a data-center network.
It also enables the network-admin to get the attributes
of servers and virtual machines from the hypervisor
management framework such as Vcenter for VMware.
fdmi(123) - FDMI feature allows network-admin to view and monitor
Fabric devices like Host Bus Adaptors in a data center network.
cmm(124) - Cable Management Manager feature on allows auto detection
of cabling errors in clos and non-clos network designs.
ntp(125) - Network Time Protocol feature allows clock
synchronization of router to other servers and
clients.
fabricAccess(126) - Single point of Access feature for the Fabric Network.
nat(127) - IP Network Address Translation Manager
vlanVnSeg(128) - Vlan based vn-segment is a simplified multi-tenancy
solution in Vinci. This allows Vinci to support more
than 4k tenants for the whole network but with limit(<4k)
for each leaf node.
bulkStat(129) - Bulk Stats Collection and Export feature
is a solution to collect bulk/stats and export
to NMS. This feature uses CM services to collect
data and transfers raw and processed date to NMS.
bbu(130) - BBU is a Battery Backup Unit support feature on Smart
Grid platforms.
vnSegment(131) - Multi-Tenancy and Virtual Network Segment(VN-Segment)
allows the creation of virtual network segments to
facilitate the creation and operation of virtual data
centers.
evb(132) - Edge Virtual Bridge feature is based on 802.1Qbg and
defines the interaction between virtual switching environments
in a hypervisor and the first-layer in a switching environment.
ngMvpn(134) - Next Generation MVPN features.
hmm(135) - Host Mobility Manager maintains local and 'remote interest'
host database, detects and tracks host/VM movement.
vxlan(136) - Virtual Extensible LAN feature is an encapsulation protocol for
running an overlay network on existing Layer 3 infrastructure.
mvrp(137) - MVRP feature is an industry standard vlan-pruning
protocol. It helps in filtering unrequited traffic
downstream.
evmed(138) - EVMED feature allows network-admin
to use EEM to monitor Application, Interface
Statistics and TImer based events and schedule
actions on occurance of those events
nSegMgr(139) - Manage bridge domains as objects,
exposing them by providing APIs to external virtualization
servers such as VMware vCloud Director, Virtual Machine Manager
Openstack Quantum and Horizon.
vff(140) - Dynamic Forwarding Automation
sol(141) - Serial over LAN provides a mechanism which enables the serial controller
of a managed system to be redirected over an IPMI session using LAN packets.
nxapi(143) - nxapi feature exposes CLIs that traditionally run on the switch to the outside
of the switch through HTTP/HTTPs.
itd(144) - With Intelligent Traffic Director(ITD), customer can deploy service appliances from any vendors
with no Network/Topology change.
vmTracker(145) - vmTracker tracks all the virtual machines in a given system.
xosFeatureTest(146) - To test single instance feature.
xosMIFeatureTest(147) - To test multi instance feature.
nxschema(148) - Provide schema documentation for any XMLised command.
mplsStatic(149) - Static LSP support for IPv4 and IPv6 next hops.
imp(150) - IMP feature is used in OSPFv3 for IPSEC security.
evc(151) - Ethernet Virtual Connection.
ptp(152) - Precision Time protocol.
bashShell(153) - Access Bourne-Again Shell.
nxdb(154) - Native XML Database.
ngoam(155) - Next generation OAM functionality.
mld(156) - Multicast listener discovery protocol.
evpn(157) - For the evpn feature. That box is evpn capable.
smartChannel(158) - smartChannel is a layer 2 traffic redirection.
openFlow(159) - OpenFlow is a SDN protocol that enables the SDN Controller to interact with the forwarding plane.
mplsSegmentRouting(160) - This feature enables segment-routing over mpls.
analytics(161) - Feature to support analytics module that facilitates Tetration analytics.
ipp(162) - Interconnect Policy Provisioning feature to automate configuration of DCI switch via policy modeling objects notification.
licenseSmart(163) - Smart Licensing is a way of licensing that simplifies the licensing experience across the enterprise and adds flexibility.
pmn(164) - On the leaf, this feature manages the uplink bandwidth to spine for multiple multicast traffic streams so that no link is over-subscribed while sending traffic to or receiving traffic from the spine.
dpt(165) - Programmatic way to configure packet tracing for a particular flow on a given switch.
ngmvpn(166) - Next generation MVPN.
dciTunnelInterop(167) - This feature enables interop between various tunnels.
fabricTelemetry(168) - Feature for collecting analytics for TCP/CPU/IO.
plb(169) - This feature provides the capability to do server and appliance load-balancing across a Programmable Fabric built with the Nexus Switches.
vmis(170) - This would facilitate the identification of the virtual machines running on the host, which can be used for VM statistics collection, VM monitoring, Slow drain.
ldbmgr(171) - To keep track of adjacency found in CDP, LLDP etc for higher level consumption.
icam(172) - ICAM is a TCAM Analytics Feature, which gets all the information about the TCAM.
catena(173) - Catena is a feature which aids in chaining of network appliances so that packets are redirected through multiple set of devices.
licensePlr(174) - Permanent License Reservation is a set of capabilities that have been designed for highly secure environments where communications with outside environments is difficult to impossible.
poap(200) - Power-On Auto Provisioning.
sflow(264) - Feature SFLOW.
elo(9875) - Feature ELO.
. |
|
INTEGER |
ivr(1), fcip(2), fcsp(3), ficon(4), iscsi(5), tacacs(6), qosManager(7), portSecurity(8), fabricBinding(9), iscsiInterfaceVsanMembership(10), ike(11), isns(12), ipSec(13), portTracker(14), scheduler(15), npiv(16), sanExtTuner(17), dpvm(18), extenedCredit(19), cloudDiscovery(20), isis(21), ospf(22), ospfV3(23), rip(24), bgp(25), pim(26), igmp(27), msdp(28), pim6(29), eigrp(30), sdv(31), cluster(32), sme(33), lacp(34), amt(35), dot1x(36), npv(37), l2nac(38), glbp(39), dhcpSnooping(40), hsrp(41), svi(42), vmm(43), pvlan(44), tunnelManager(45), ethPortSec(46), lisp(47), trustSec(48), copp(49), udld(50), mcecm(51), pbr(52), nfm(53), isapi(54), vrrp(55), netSift(56), isisL2(57), cimServer(58), otv(59), sanTap(60), nasb(61), dmm(62), u2rib(63), isisOtv(64), orib(65), fcoe(66), siaServiceBroker(67), evfp(68), vtp(69), splitter(70), sfm(71), ioa(72), telnetServer(73), sshServer(74), httpServer(75), wccp(76), siaSve(77), xcvrFreq(78), assocMgr(79), lldp(80), rsvp(81), ldp(82), te(83), mplsOam(84), l2vpn(85), drap(86), bfd(87), bfdApp(88), fex(89), pong(90), rtp(91), ldap(92), privilege(93), oim(94), mplsMgr(95), ulib(96), scp(97), sftp(98), l3vpn(99), mvpn(101), ipPool(102), uufb(103), umfb(104), ethernetNpv(105), wccpClient(106), scadaGw(107), poe(108), flexlink(109), niv(110), vem(111), ewise(112), onep(113), slaS(114), slaR(115), rise(116), pppManager(117), itronMcastAgent(118), vsmAggregation(119), segmentation(120), vrrpv3(121), vTracker(122), fdmi(123), cmm(124), ntp(125), fabricAccess(126), nat(127), vlanVnSeg(128), bulkStat(129), bbu(130), vnSegment(131), evb(132), ngMvpn(134), hmm(135), vxlan(136), mvrp(137), evmed(138), nSegMgr(139), vff(140), sol(141), nxapi(143), itd(144), vmTracker(145), xosFeatureTest(146), xosMIFeatureTest(147), nxschema(148), mplsStatic(149), imp(150), evc(151), ptp(152), bashShell(153), nxdb(154), ngoam(155), mld(156), evpn(157), smartChannel(158), openFlow(159), mplsSegmentRouting(160), analytics(161), ipp(162), licenseSmart(163), pmn(164), dpt(165), ngmvpn(166), dciTunnelInterop(167), fabricTelemetry(168), plb(169), vmis(170), ldbmgr(171), icam(172), catena(173), licensePlr(174), poap(200), sflow(264), elo(9875) |
|