CISCO-FC-TUNNEL-MIB

File: CISCO-FC-TUNNEL-MIB.mib (44271 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF IF-MIB
SNMPv2-TC CISCO-SMI INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Counter32 Counter64 MODULE-COMPLIANCE
OBJECT-GROUP InterfaceIndex RowStatus
TruthValue ciscoMgmt InetAddressType
InetAddress SnmpAdminString

Defined Types

CftTcpTunnelEntry  
SEQUENCE    
  cftFiberChannelIf InterfaceIndex
  cftTcpTunnelName SnmpAdminString
  cftTcpTunnelSrcIpType InetAddressType
  cftTcpTunnelSrcIp InetAddress
  cftTcpTunnelDestIpType InetAddressType
  cftTcpTunnelDestIp InetAddress
  cftTcpTunnelCmdSrcPort Unsigned32
  cftTcpTunnelCmdDestPort Unsigned32
  cftTcpTunnelDataSrcPort Unsigned32
  cftTcpTunnelDataDestPort Unsigned32
  cftTcpTunnelCmdMWS INTEGER
  cftTcpTunnelDataMWS INTEGER
  cftTcpTunnelCmdKeepAliveTime Unsigned32
  cftTcpTunnelDataKeepAliveTime Unsigned32
  cftTcpTunnelCmdSelectiveAck TruthValue
  cftTcpTunnelDataSelectiveAck TruthValue
  cftTcpTunnelCmdConnectStatus INTEGER
  cftTcpTunnelDataConnectStatus INTEGER
  cftTcpTunnelOperStatus INTEGER
  cftTcpTunnelStatus RowStatus

CftTcpTunnelStatsEntry  
SEQUENCE    
  cftTcpTunnelCmdRxSegmentOctets Counter64
  cftTcpTunnelDataRxSegmentOctets Counter64
  cftTcpTunnelCmdRxPrestufOctets Counter64
  cftTcpTunnelDataRxPrestufOctets Counter64
  cftTcpTunnelCmdRxPoststufOctets Counter64
  cftTcpTunnelDataRxPoststufOctets Counter64
  cftTcpTunnelCmdTxOctets Counter64
  cftTcpTunnelDataTxOctets Counter64
  cftTcpTunnelCmdTxPkts Counter32
  cftTcpTunnelDataTxPkts Counter32
  cftTcpTunnelCmdTxDrops Counter32
  cftTcpTunnelDataTxDrops Counter32

CftIfTcpEntry  
SEQUENCE    
  cftIfTcpIndex InterfaceIndex
  cftIfTcpConnInit Counter32
  cftIfTcpConnAccepted Counter32
  cftIfTcpConnEstablished Counter32
  cftIfTcpConnDrops Counter32
  cftIfTcpConnClosed Counter32
  cftIfTcpTxPkts Counter32
  cftIfTcpTxDataPkts Counter32
  cftIfTcpTxDataOctets Counter32
  cftIfTcpRetxDataPkts Counter32
  cftIfTcpRetxDataOctets Counter32
  cftIfTcpRxPkts Counter32
  cftIfTcpRxInSequencePkts Counter32
  cftIfTcpRxInSequenceOctets Counter32
  cftIfTcpRxCcksumErrPkts Counter32
  cftIfTcpRxBadOffsetPkts Counter32
  cftIfTcpRxOutOfOrderPkts Counter32
  cftIfTcpRxOutOfOrderOctets Counter32

CftIfTcpExtEntry  
SEQUENCE    
  cftIfTcpEmbryonicConnDrops Counter32
  cftIfTcpSegsTryToGetRTT Counter32
  cftIfTcpSegsSucceedToGetRTT Counter32
  cftIfTcpDelayedAcksSent Counter32
  cftIfTcpConnDroppedRxTimeout Counter32
  cftIfTcpRetransmitTimeout Counter32
  cftIfTcpPersistTimeout Counter32
  cftIfTcpKeepaliveTimeout Counter32
  cftIfTcpKeepaliveProbesSent Counter32
  cftIfTcpConnDroppedInKeepalive Counter32
  cftIfTcpConnDroppedInPersist Counter32
  cftIfTcpConnDrainedByNoMemory Counter32
  cftIfTcpAckOnlyPkts Counter32
  cftIfTcpTxWindowProbes Counter32
  cftIfTcpTxURGPkts Counter32
  cftIfTcpTxWindowUpdateOnlyPkts Counter32
  cftIfTcpTxControlPkts Counter32
  cftIfTcpRxDroppedByNoMemory Counter32
  cftIfTcpRxTooShort Counter32
  cftIfTcpRxDupOnlyPkts Counter32
  cftIfTcpRxDupOnlyOctets Counter32
  cftIfTcpRxDupDataPkts Counter32
  cftIfTcpRxDupOctetsInPartDupPkts Counter32
  cftIfTcpRxDataAfterWindowPkts Counter32
  cftIfTcpRxDataAfterWindowOctets Counter32
  cftIfTcpRxPktsAfterConnClose Counter32
  cftIfTcpRxWindowProbesPkts Counter32
  cftIfTcpRxDupAcks Counter32
  cftIfTcpRxAcksForUnsentData Counter32
  cftIfTcpRxAcksPkts Counter32
  cftIfTcpOctetAckedByRxAcks Counter32
  cftIfTcpRxWindowUpdatePkts Counter32
  cftIfTcpSegDropByPAWS Counter32
  cftIfTcpTxSackFackDataPkts Counter32
  cftIfTcpTxSackFackDataOctets Counter32
  cftIfTcpRetxSackFackDataPkts Counter32
  cftIfTcpRetxSackFackDataOctets Counter32
  cftIfTcpSackFackConnClosed Counter32
  cftIfTcpRetxSackFackTimeouts Counter32
  cftIfTcpHdrPredictOkForAcks Counter32
  cftIfTcpHdrPredictOkForDataPkts Counter32

Defined Values

ciscoFiberChannelTunnelMIB 1.3.6.1.4.1.9.9.9999
The CISCO-FC-TUNNEL-MIB is used to configure Fiber Channel (FC) tunneled by other protocols, i.e. TCP (Transmision Control Protocol) or UDP (User Datagram Protocol), and monitor the status of the tunnels. And Fiber Channel Command and Data messages can be tunneled by those protocols through the internet to extend the Fiber Channel network.
MODULE-IDENTITY    

ciscoFCTunnelMIBNotifi 1.3.6.1.4.1.9.9.9999.0
OBJECT IDENTIFIER    

ciscoFCTunnelMIBObjects 1.3.6.1.4.1.9.9.9999.1
OBJECT IDENTIFIER    

ciscoFCTunnelMIBConform 1.3.6.1.4.1.9.9.9999.2
OBJECT IDENTIFIER    

cftTcpTunnelObjects 1.3.6.1.4.1.9.9.9999.1.1
OBJECT IDENTIFIER    

cftMaxTcpTunnels 1.3.6.1.4.1.9.9.9999.1.1.1
Maximum number of Fiber Channel TCP tunnels that can be built per Fiber Channel interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cftTcpTunnelTable 1.3.6.1.4.1.9.9.9999.1.1.2
This table contains TCP tunnels' information for FC interfaces. FC can use these TCP tunnels to communicate with each other through the internet. The TCP tunnels will help to build up reliable connections between FC interfaces to exchange FC Command and Data information. This table is for configuring the TCP tunnels and monitoring the status of tunnels. And the number of entries in this table is decided by the MIB object cftMaxTcpTunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CftTcpTunnelEntry

cftTcpTunnelEntry 1.3.6.1.4.1.9.9.9999.1.1.2.1
An entry contains the configuration and status objects of a TCP tunnel. The configuration includes the TCP connection 4-tuples, source IP, destination IP, source port , destination port, and some other TCP connection's options. The status includes the TCP connections and Tunnel's administration and operation. For each TCP tunnel, there are 2 TCP connections that will be built up in the tunneling. One is for FC Command communication and the other is for FC Data communication.
Status: current Access: not-accessible
OBJECT-TYPE    
  CftTcpTunnelEntry  

cftFiberChannelIf 1.3.6.1.4.1.9.9.9999.1.1.2.1.1
The interface index of the FC interface with TCP tunneling capable.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

cftTcpTunnelName 1.3.6.1.4.1.9.9.9999.1.1.2.1.2
The name of the FC TCP tunnel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(1..20)  

cftTcpTunnelSrcIpType 1.3.6.1.4.1.9.9.9999.1.1.2.1.3
The source IP address type of the FC TCP tunnel.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

cftTcpTunnelSrcIp 1.3.6.1.4.1.9.9.9999.1.1.2.1.4
The source IP address of the FC TCP tunnel. The type of the IP address is determined by the object cftTcpTunnelSrcIpType in the same entry.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

cftTcpTunnelDestIpType 1.3.6.1.4.1.9.9.9999.1.1.2.1.5
The destination IP address type of the FC TCP tunnel.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

cftTcpTunnelDestIp 1.3.6.1.4.1.9.9.9999.1.1.2.1.6
The destination IP address of the FC TCP tunnel. The type of the IP address is determined by the object cftTcpTunnelDestIpType in the same entry.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

cftTcpTunnelCmdSrcPort 1.3.6.1.4.1.9.9.9999.1.1.2.1.7
The source port of the TCP connection for FC Command communication.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1025..65535  

cftTcpTunnelCmdDestPort 1.3.6.1.4.1.9.9.9999.1.1.2.1.8
The destination port of the TCP connection for FC Command communication.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1025..65535  

cftTcpTunnelDataSrcPort 1.3.6.1.4.1.9.9.9999.1.1.2.1.9
The source port of the TCP connection for FC Data communication.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1025..65535  

cftTcpTunnelDataDestPort 1.3.6.1.4.1.9.9.9999.1.1.2.1.10
The destination port of the TCP connection for FC Data communication.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1025..65535  

cftTcpTunnelCmdMWS 1.3.6.1.4.1.9.9.9999.1.1.2.1.11
The maximum window size of the TCP connection for FC Command communication. ws32kbytes : means the window size is 32 kilo-bytes. ws128kbytes : means the window size is 128 kilo-bytes. ws256kbytes : means the window size is 256 kilo-bytes. ws512kbytes : means the window size is 512 kilo-bytes.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ws32kbytes(1), ws128kbytes(2), ws256kbytes(3), ws512kbytes(4)  

cftTcpTunnelDataMWS 1.3.6.1.4.1.9.9.9999.1.1.2.1.12
The maximum window size of the TCP connection for FC Data communication. ws32kbytes : means the window size is 32 kilo-bytes. ws128kbytes : means the window size is 128 kilo-bytes. ws256kbytes : means the window size is 256 kilo-bytes. ws512kbytes : means the window size is 512 kilo-bytes.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ws32kbytes(1), ws128kbytes(2), ws256kbytes(3), ws512kbytes(4)  

cftTcpTunnelCmdKeepAliveTime 1.3.6.1.4.1.9.9.9999.1.1.2.1.13
The keep alive time of the TCP connection for FC Command communication.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 3600..10800  

cftTcpTunnelDataKeepAliveTime 1.3.6.1.4.1.9.9.9999.1.1.2.1.14
The keep alive time of the TCP connection for FC Data communication.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 3600..10800  

cftTcpTunnelCmdSelectiveAck 1.3.6.1.4.1.9.9.9999.1.1.2.1.15
The selective acknowledge option of the TCP connection for FC Command communication.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

cftTcpTunnelDataSelectiveAck 1.3.6.1.4.1.9.9.9999.1.1.2.1.16
The selective acknowledge option of the TCP connection for FC Data communication.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

cftTcpTunnelCmdConnectStatus 1.3.6.1.4.1.9.9.9999.1.1.2.1.17
The status of the TCP connection for FC Command communication. connected(1) means the TCP connection for FC Command has been connected for communication. notConnected(2) means the TCP connection for FC Command is not successful.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), notConnected(2)  

cftTcpTunnelDataConnectStatus 1.3.6.1.4.1.9.9.9999.1.1.2.1.18
The status of the TCP connection for FC Data communication. connected(1) means the TCP connection for FC Data has been connected for communication. notConnected(2) means the TCP connection for FC Data is not successful.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), notConnected(2)  

cftTcpTunnelOperStatus 1.3.6.1.4.1.9.9.9999.1.1.2.1.19
The operational status of this TCP tunnel. up(1) means this TCP tunnel is up and active. down(2) means this TCP tunnel is not active.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

cftTcpTunnelStatus 1.3.6.1.4.1.9.9.9999.1.1.2.1.20
The status of this TCP tunnel entry. If this object is active, the other objects in the same row cannot be modified by the management station.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cftTcpTunnelStatsTable 1.3.6.1.4.1.9.9.9999.1.1.3
The table of traffic statistics information for FC tunnels. The entries in this table are shown only if the cftTcpTunnelStatus object of the corresponding entries are active in the cftTcpTunnelTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CftTcpTunnelStatsEntry

cftTcpTunnelStatsEntry 1.3.6.1.4.1.9.9.9999.1.1.3.1
The entry is indexed by the same index in the cftTcpTunnelTable. And this entry contains statistics information of FC Command TCP connection and FC Data TCP connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  CftTcpTunnelStatsEntry  

cftTcpTunnelCmdRxSegmentOctets 1.3.6.1.4.1.9.9.9999.1.1.3.1.1
Number of TCP segment bytes received in the FC TCP Command connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cftTcpTunnelDataRxSegmentOctets 1.3.6.1.4.1.9.9.9999.1.1.3.1.2
Number of TCP segment bytes received in the FC TCP Data connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cftTcpTunnelCmdRxPrestufOctets 1.3.6.1.4.1.9.9.9999.1.1.3.1.3
Number of bytes received before stuffing the internal hardware bus header in the FC TCP Command connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cftTcpTunnelDataRxPrestufOctets 1.3.6.1.4.1.9.9.9999.1.1.3.1.4
Number of bytes received before stuffing the internal hardware bus header in the FC TCP Data connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cftTcpTunnelCmdRxPoststufOctets 1.3.6.1.4.1.9.9.9999.1.1.3.1.5
Number of bytes received after stuffing the internal hardward bus header in the FC TCP Command connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cftTcpTunnelDataRxPoststufOctets 1.3.6.1.4.1.9.9.9999.1.1.3.1.6
Number of bytes received after stuffing the internal hardward bus header in the FC TCP Data connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cftTcpTunnelCmdTxOctets 1.3.6.1.4.1.9.9.9999.1.1.3.1.7
Number of bytes sent in the FC TCP Command connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cftTcpTunnelDataTxOctets 1.3.6.1.4.1.9.9.9999.1.1.3.1.8
Number of bytes sent in the FC TCP Data connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cftTcpTunnelCmdTxPkts 1.3.6.1.4.1.9.9.9999.1.1.3.1.9
Number of packets sent in the FC TCP Command connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftTcpTunnelDataTxPkts 1.3.6.1.4.1.9.9.9999.1.1.3.1.10
Number of packets sent in the FC TCP Data connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftTcpTunnelCmdTxDrops 1.3.6.1.4.1.9.9.9999.1.1.3.1.11
Number of packets dropped in the FC TCP Command connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftTcpTunnelDataTxDrops 1.3.6.1.4.1.9.9.9999.1.1.3.1.12
Number of packets dropped in the FC TCP Data connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpTable 1.3.6.1.4.1.9.9.9999.1.1.4
This table contains the statistics information of the Fiber Channel interface with the ability of TCP tunneling.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CftIfTcpEntry

cftIfTcpEntry 1.3.6.1.4.1.9.9.9999.1.1.4.1
This entry contains TCP statistics information for a given FC interface with the ability of TCP tunneling.
Status: current Access: not-accessible
OBJECT-TYPE    
  CftIfTcpEntry  

cftIfTcpIndex 1.3.6.1.4.1.9.9.9999.1.1.4.1.1
The interface index of the FC interface capable of carrying TCP tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

cftIfTcpConnInit 1.3.6.1.4.1.9.9.9999.1.1.4.1.2
Number of TCP connections initiated.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpConnAccepted 1.3.6.1.4.1.9.9.9999.1.1.4.1.3
Number of TCP requested connections accepted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpConnEstablished 1.3.6.1.4.1.9.9.9999.1.1.4.1.4
Number of TCP connections established.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpConnDrops 1.3.6.1.4.1.9.9.9999.1.1.4.1.5
Number of TCP connections dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpConnClosed 1.3.6.1.4.1.9.9.9999.1.1.4.1.6
Number of TCP connections closed. This includes those connections dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpTxPkts 1.3.6.1.4.1.9.9.9999.1.1.4.1.7
Number of TCP transmitting packets. This includes TCP control and data packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpTxDataPkts 1.3.6.1.4.1.9.9.9999.1.1.4.1.8
Number of TCP transmitting data packets. This doesn't include those TCP control traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpTxDataOctets 1.3.6.1.4.1.9.9.9999.1.1.4.1.9
Number of TCP transmitting data octets. This doesn't include those TCP control traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRetxDataPkts 1.3.6.1.4.1.9.9.9999.1.1.4.1.10
Number of TCP re-transmitting data packets. This doesn't include those TCP control traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRetxDataOctets 1.3.6.1.4.1.9.9.9999.1.1.4.1.11
Number of TCP re-transmitting data octets. This doesn't include those TCP control traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxPkts 1.3.6.1.4.1.9.9.9999.1.1.4.1.12
Number of TCP packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxInSequencePkts 1.3.6.1.4.1.9.9.9999.1.1.4.1.13
Number of TCP packets received in sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxInSequenceOctets 1.3.6.1.4.1.9.9.9999.1.1.4.1.14
Number of TCP octets received in sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxCcksumErrPkts 1.3.6.1.4.1.9.9.9999.1.1.4.1.15
Number of TCP packets received with checksum error.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxBadOffsetPkts 1.3.6.1.4.1.9.9.9999.1.1.4.1.16
Number of TCP packets received with bad offset.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxOutOfOrderPkts 1.3.6.1.4.1.9.9.9999.1.1.4.1.17
Number of out-of-order TCP packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxOutOfOrderOctets 1.3.6.1.4.1.9.9.9999.1.1.4.1.18
Number of out-of-order TCP octets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpExtTable 1.3.6.1.4.1.9.9.9999.1.1.5
This table contains the statistics information of the Fiber Channel interface with the ability of TCP tunneling. This table is an extension of cftIfTcpTable and this table provides more specific counters that not all TCP protocol stack will support.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CftIfTcpExtEntry

cftIfTcpExtEntry 1.3.6.1.4.1.9.9.9999.1.1.5.1
This entry contains TCP statistics information for a given FC interface with the ability of TCP tunneling.
Status: current Access: not-accessible
OBJECT-TYPE    
  CftIfTcpExtEntry  

cftIfTcpEmbryonicConnDrops 1.3.6.1.4.1.9.9.9999.1.1.5.1.1
Number of TCP embryonic connections dropped. The embryonic drop counter tells the user how many times the connections did not go through because of not receiving a reply for the SYN packets - which gives a measure for the quality of the path between the two peers.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpSegsTryToGetRTT 1.3.6.1.4.1.9.9.9999.1.1.5.1.2
Number of TCP segments which try to get RTT (Round Trip Time).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpSegsSucceedToGetRTT 1.3.6.1.4.1.9.9.9999.1.1.5.1.3
Number of TCP segments which get RTT (Round Trip Time) successfully.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpDelayedAcksSent 1.3.6.1.4.1.9.9.9999.1.1.5.1.4
number of TCP delayed ACKs sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpConnDroppedRxTimeout 1.3.6.1.4.1.9.9.9999.1.1.5.1.5
Number of TCP connections dropped because of receiving timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRetransmitTimeout 1.3.6.1.4.1.9.9.9999.1.1.5.1.6
Number of TCP retransmitting timeouts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpPersistTimeout 1.3.6.1.4.1.9.9.9999.1.1.5.1.7
Number of TCP persisting timeouts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpKeepaliveTimeout 1.3.6.1.4.1.9.9.9999.1.1.5.1.8
Number of TCP keepalive timeouts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpKeepaliveProbesSent 1.3.6.1.4.1.9.9.9999.1.1.5.1.9
Number of TCP keep-alive probes sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpConnDroppedInKeepalive 1.3.6.1.4.1.9.9.9999.1.1.5.1.10
Number of TCP connections dropped in keepalive.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpConnDroppedInPersist 1.3.6.1.4.1.9.9.9999.1.1.5.1.11
Number of TCP connections dropped in persisting.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpConnDrainedByNoMemory 1.3.6.1.4.1.9.9.9999.1.1.5.1.12
Number of TCP connections drained dut to memory shortage.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpAckOnlyPkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.13
Number of TCP packets sent with only ACK flag on.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpTxWindowProbes 1.3.6.1.4.1.9.9.9999.1.1.5.1.14
Number of TCP window probing packets sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpTxURGPkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.15
Number of TCP packets sent with URG flag on.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpTxWindowUpdateOnlyPkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.16
Number of TCP packets sent only for only updating the window size.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpTxControlPkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.17
Number of TCP packets sent with SYN, FIN, or RST flags on.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxDroppedByNoMemory 1.3.6.1.4.1.9.9.9999.1.1.5.1.18
Number of receiving TCP packets dropped because of lacking of memory.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxTooShort 1.3.6.1.4.1.9.9.9999.1.1.5.1.19
Number of TCP packets received with too short length.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxDupOnlyPkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.20
Number of duplicated TCP packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxDupOnlyOctets 1.3.6.1.4.1.9.9.9999.1.1.5.1.21
Number of duplicated TCP octets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxDupDataPkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.22
Number of TCP packets received with duplicated data.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxDupOctetsInPartDupPkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.23
Number of duplicated TCP octets received in part of duplicated packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxDataAfterWindowPkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.24
Number of TCP packets with data received after window.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxDataAfterWindowOctets 1.3.6.1.4.1.9.9.9999.1.1.5.1.25
Number of TCP octets with data received after window.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxPktsAfterConnClose 1.3.6.1.4.1.9.9.9999.1.1.5.1.26
Number of TCP packets received after the connection close.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxWindowProbesPkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.27
Number of TCP window probing packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxDupAcks 1.3.6.1.4.1.9.9.9999.1.1.5.1.28
Number of duplicated TCP acknowledge packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxAcksForUnsentData 1.3.6.1.4.1.9.9.9999.1.1.5.1.29
Number of TCP acknowledge packets received for unsent data.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxAcksPkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.30
Number of TCP packets received with ACK flag on.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpOctetAckedByRxAcks 1.3.6.1.4.1.9.9.9999.1.1.5.1.31
Number of TCP octets received with ACK flag on.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRxWindowUpdatePkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.32
Number of TCP packets received for updating window size.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpSegDropByPAWS 1.3.6.1.4.1.9.9.9999.1.1.5.1.33
Number of TCP segments dropped due to Protection Against Wrapped Sequence Number (PAWS) algorithm.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpTxSackFackDataPkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.34
Number of TCP data packets sent with SACK option on.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpTxSackFackDataOctets 1.3.6.1.4.1.9.9.9999.1.1.5.1.35
Number of TCP data octets sent with SACK option on.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRetxSackFackDataPkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.36
Number of TCP data packets re-sent with SACK option on.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRetxSackFackDataOctets 1.3.6.1.4.1.9.9.9999.1.1.5.1.37
Number of TCP data octets re-sent with SACK option on.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpSackFackConnClosed 1.3.6.1.4.1.9.9.9999.1.1.5.1.38
Number of TCP connections closed with SACK option on.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpRetxSackFackTimeouts 1.3.6.1.4.1.9.9.9999.1.1.5.1.39
Number of TCP timeouts re-sent with SACK option on.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpHdrPredictOkForAcks 1.3.6.1.4.1.9.9.9999.1.1.5.1.40
Number of times the header predication code is hit by TCP packets with ACK option on.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftIfTcpHdrPredictOkForDataPkts 1.3.6.1.4.1.9.9.9999.1.1.5.1.41
Number of times the header predication code is hit by the packets of FC Data TCP connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cftTunnelMIBCompliances 1.3.6.1.4.1.9.9.9999.2.1
OBJECT IDENTIFIER    

cftTunnelMIBGroups 1.3.6.1.4.1.9.9.9999.2.2
OBJECT IDENTIFIER    

cftTunnelMIBComplianceV01 1.3.6.1.4.1.9.9.9999.2.1.1
A Fiber Channel tunneling implementation that lists the groups supporting configuration tunnels and statistics information of the tunnels.
Status: current Access: read-only
MODULE-COMPLIANCE    

cftTcpTunnelConfigGroup 1.3.6.1.4.1.9.9.9999.2.2.1
The collection of objects which are used to describe and configure Fiber Channal TCP tunneling.
Status: current Access: read-only
OBJECT-GROUP    

cftTcpTunnelStatGroup 1.3.6.1.4.1.9.9.9999.2.2.2
The collection of objects which are used to monitor the traffic of TCP tunnels.
Status: current Access: read-only
OBJECT-GROUP    

cftIfTcpGroup 1.3.6.1.4.1.9.9.9999.2.2.3
The collection of objects which are used to monitor the status and statistics information of the TCP stack for the tunneled Fiber Channel interface.
Status: current Access: read-only
OBJECT-GROUP    

cftIfTcpExtGroup 1.3.6.1.4.1.9.9.9999.2.2.4
The collection of objects which are used to monitor the status and statistics information of the TCP stack for the tunneled Fiber Channel interface. This extension group provides more detail and specific statistics information that not all the TCP stack will support.
Status: current Access: read-only
OBJECT-GROUP