CIG-SERVERS-MIB

File: CIG-SERVERS-MIB.mib (46810 bytes)

Imported modules

SNMPv2-CONF	SNMPv2-SMI	SNMPv2-TC
RFC1155-SMI

Imported symbols

OBJECT-GROUP	NOTIFICATION-GROUP	MODULE-COMPLIANCE
Integer32	Unsigned32	enterprises
Gauge32	Counter32	OBJECT-TYPE
MODULE-IDENTITY	NOTIFICATION-TYPE	RowStatus
TEXTUAL-CONVENTION	TruthValue	DateAndTime
TimeInterval	DisplayString	IpAddress

Defined Types

CigDhcpServersPoolEntry
SEQUENCE
	cigDhcpServersPoolIndex	Integer32
	cigDhcpServersPoolStartIPAddr	IpAddress
	cigDhcpServersPoolEndIPAddr	IpAddress
	cigDhcpServersPoolMode	TruthValue
	cigDhcpServersPoolName	DisplayString
	cigDhcpServersPoolClientID	OCTET STRING
	cigDhcpServersPoolLeaseTime	Unsigned32
	cigDhcpServersPoolBootFile	DisplayString
	cigDhcpServersPoolNextServer	IpAddress
	cigDhcpServersPoolSubnetMask	IpAddress
	cigDhcpServersPoolDefaultGateway	DisplayString
	cigDhcpServersPoolDnsServer	DisplayString
	cigDhcpServersPoolDomainName	DisplayString
	cigDhcpServersPoolServerName	DisplayString
	cigDhcpServersPoolRowStatus	RowStatus

CigDhcpServersPoolGenOptionEntry
SEQUENCE
	cigDhcpServersOptionPoolIndex	Integer32
	cigDhcpServersOptionIndex	Integer32
	cigDhcpServersOptionName	DisplayString
	cigDhcpServersOptionType	INTEGER
	cigDhcpServersOptionValue	OCTET STRING
	cigDhcpServersOptionRowStatus	RowStatus

CigDhcpServersPoolVendorSpecificOptionEntry
SEQUENCE
	cigDhcpServersVendorSpecificOptionPoolIndex	Integer32
	cigDhcpServersVendorSpecificOptionIndex	Integer32
	cigDhcpServersVendorSpecificOptionName	DisplayString
	cigDhcpServersVendorSpecificClassIdentifier	DisplayString
	cigDhcpServersVendorSpecificOptionType	INTEGER
	cigDhcpServersVendorSpecificOptionValue	OCTET STRING
	cigDhcpServersVendorSpecificOptionRowStatus	RowStatus

Defined Values

cigServers		1.3.6.1.4.1.6889.2.1.16
This module defines an interface configure Servers as Tftp and Dhcp servers. Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification) embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisionsIt is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties a non-exclusive license to use this Specification in connection with the management of AVAYA products.This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY

avaya		1.3.6.1.4.1.6889
OBJECT IDENTIFIER

mibs		1.3.6.1.4.1.6889.2
OBJECT IDENTIFIER

lsg		1.3.6.1.4.1.6889.2.1
OBJECT IDENTIFIER

cigTftpServers		1.3.6.1.4.1.6889.2.1.16.1
OBJECT IDENTIFIER

cigDhcpServers		1.3.6.1.4.1.6889.2.1.16.2
OBJECT IDENTIFIER

cigTftpServersNotification		1.3.6.1.4.1.6889.2.1.16.1.0
OBJECT IDENTIFIER

cigTftpServersDownloadFailureTrap		1.3.6.1.4.1.6889.2.1.16.1.0.1
Trap based on TFTP client failure to download file from gateway TFTP server. The Error code message strings are according RFC 1350: 0 Not defined 1 File not found. 2 Access violation. 3 Disk full or allocation exceeded. 4 Illegal TFTP operation. 5 Unknown transfer ID. 6 File already exists. 7 No such user.
Status: current	Access: read-write
NOTIFICATION-TYPE

cigTftpServersUploadFailureTrap		1.3.6.1.4.1.6889.2.1.16.1.0.2
Trap based on TFTP client failure to upload file to gateway TFTP server. The Error code message strings are according RFC 1350: 0 Not defined 1 File not found. 2 Access violation. 3 Disk full or allocation exceeded. 4 Illegal TFTP operation. 5 Unknown transfer ID. 6 File already exists. 7 No such user. please note that the gateway TFTP server prevents uploading files to the device using TFTP client, pnly downloading files from the device. The upload files to the gateway TFTP server is by using LOAD-MIB.
Status: current	Access: read-write
NOTIFICATION-TYPE

cigTftpServersGenConfig		1.3.6.1.4.1.6889.2.1.16.1.1
OBJECT IDENTIFIER

cigTftpServersMode		1.3.6.1.4.1.6889.2.1.16.1.1.1
Enable Tftp Server in the device. Default = False (Disable).
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

cigTftpServersResetStatCounters		1.3.6.1.4.1.6889.2.1.16.1.1.2
reset (1) - Reset the TFTP Server Statistics. This object should be treated as write-only.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	reset(1)

cigTftpServersMemoryAllocation		1.3.6.1.4.1.6889.2.1.16.1.2
OBJECT IDENTIFIER

cigTftpServersTotalBytesUsedInNvram		1.3.6.1.4.1.6889.2.1.16.1.2.1
Number of bytes used in nvram. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersTotalBytesCapacityInNvram		1.3.6.1.4.1.6889.2.1.16.1.2.2
Number of bytes capacity in nvram. Default = 131072.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersTotalBytesUsedInRam		1.3.6.1.4.1.6889.2.1.16.1.2.3
Number of bytes used in ram. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersTotalBytesCapacityInRam		1.3.6.1.4.1.6889.2.1.16.1.2.4
Number of bytes capacity in ram. Default = 20971520.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersGenStats		1.3.6.1.4.1.6889.2.1.16.1.3
OBJECT IDENTIFIER

cigTftpServersSuccessfulDownloads		1.3.6.1.4.1.6889.2.1.16.1.3.1
Number of tftp successful downloads. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersNotDefinedErrors		1.3.6.1.4.1.6889.2.1.16.1.3.2
Number of tftp errors not defined - Error code==0. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersFileNotFoundErrors		1.3.6.1.4.1.6889.2.1.16.1.3.3
Number of tftp errors of file not found - Error code == 1. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersAccessViolationErrors		1.3.6.1.4.1.6889.2.1.16.1.3.4
Number of tftp errors of Access violation - Error code == 2. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersDiskFullErrors		1.3.6.1.4.1.6889.2.1.16.1.3.5
Number of tftp errors of disk full - Error code == 3. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersIllegalTFTPOperationErrors		1.3.6.1.4.1.6889.2.1.16.1.3.6
Number of tftp errors of illegal TFTP operation - Error code == 4. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersUnknownTransferIdErrors		1.3.6.1.4.1.6889.2.1.16.1.3.7
Number of tftp errors of unknown transfer Id - Error code == 5. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersFileAlreadyExistsErrors		1.3.6.1.4.1.6889.2.1.16.1.3.8
Number of tftp errors of file already exists - Error code == 6. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersNoSuchUserErrors		1.3.6.1.4.1.6889.2.1.16.1.3.9
Number of tftp errors of no such user - Error code == 7. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersDownloadTimeouts		1.3.6.1.4.1.6889.2.1.16.1.3.10
Number of tftp downloads timeouts. Timeouts occurs when ACK packets from client to Server did not reach the server.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigTftpServersNotificationPacket		1.3.6.1.4.1.6889.2.1.16.1.4
OBJECT IDENTIFIER

cigTftpServersNotificationClientIpAddr		1.3.6.1.4.1.6889.2.1.16.1.4.1
The TFTP client IP address. Default = 0.0.0.0
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

cigTftpServersNotificationFilename		1.3.6.1.4.1.6889.2.1.16.1.4.2
The filename that the TFTP client tried to upload/download. Default = ''
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString	Size(0..63)

cigTftpServersNotificationErrorString		1.3.6.1.4.1.6889.2.1.16.1.4.3
The error string relevant to the Error occured during the last upload/download operation. Default = ''
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString	Size(0..63)

cigDhcpServersNotification		1.3.6.1.4.1.6889.2.1.16.2.0
OBJECT IDENTIFIER

cigDhcpServersClientConflictDetectionTrap		1.3.6.1.4.1.6889.2.1.16.2.0.1
DHCP IP address conflict detection. This trap is based on: 1. DHCP server send Ping packets before allocating new IP address. 2. The Client Decline Packets after the client sent gratuitous Arp and get response.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

cigDhcpServersServerNacksTrap		1.3.6.1.4.1.6889.2.1.16.2.0.2
Server refusal to extend lease or for other clients requests.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

cigDhcpServersNoIpAddressLeft		1.3.6.1.4.1.6889.2.1.16.2.0.3
Notification for no IP address left for specific network.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

cigDhcpServersGenConfig		1.3.6.1.4.1.6889.2.1.16.2.1
OBJECT IDENTIFIER

cigDhcpServersMode		1.3.6.1.4.1.6889.2.1.16.2.1.1
Enable Dhcp Server in the device. Default = False (Disable).
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

cigDhcpServersResetStatCounters		1.3.6.1.4.1.6889.2.1.16.2.1.2
reset (1) - Reset the DHCP Server Statistics. This object should be treated as write-only.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	reset(1)

cigDhcpServersPingDetectionMode		1.3.6.1.4.1.6889.2.1.16.2.1.3
Enable Dhcp Server sending one ping packet in order to detect IP address conflict. Default = False (Disable).
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

cigDhcpServersPingDetectionTimeout		1.3.6.1.4.1.6889.2.1.16.2.1.4
The timeout in milliseconds of the ping packet send by the DHCP server to detect IP address conflict before allocating new IP address. The user can lower this timeout in case the hosts that recieved IP addresses are on the LAN. Otherwise if the hosts are on the WAN side then the timeout shall be higher the LAN. default 500 milliseconds
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

cigDhcpServersPool		1.3.6.1.4.1.6889.2.1.16.2.2
OBJECT IDENTIFIER

cigDhcpServersPoolTable		1.3.6.1.4.1.6889.2.1.16.2.2.1
Dhcp Pool General configuration table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CigDhcpServersPoolEntry

cigDhcpServersPoolEntry		1.3.6.1.4.1.6889.2.1.16.2.2.1.1
The pool general configuration table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CigDhcpServersPoolEntry

cigDhcpServersPoolIndex		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.1
The Pool Index. G250/G350 - Up to 20 Pools are allowed.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

cigDhcpServersPoolStartIPAddr		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.2
The Start IP Address of the pool. Default = 0.0.0.0. Stop IP address shall be large or equal to start IP address. The user shall be aware that for G350/G250 the number of IP addresses to be allocated in up to 256 IPs total in all the pools. Also if the user wants to completely change the start IP address/end IP address then the pool shall be Disabled and then by setting both these addresses (start/end) to default the user can set the new values. No need to erase the configuration of the pool for this case (I.e. in order not to loose all the DHCP options configuration). The user is not able to ocnfigure pools with overlapped IP addresses. StartIPaddress can be configured different than EndIPAddress only when Client identifier is not set.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

cigDhcpServersPoolEndIPAddr		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.3
The End IP Address of the pool. Default = 0.0.0.0. End IP address shall be large or equal to start IP address. The user shall be aware that for G350/G250 the number of IP addresses to be allocated in up to 256 IPs total in all the pools. Also if the user wants to complete change the start IP address/end IP address then the pool shall be Disabled and then by setting both these addresses (start/end) to default the user can set the new values. No need to erase the configuration of the pool for this case (I.e. in order not to loose all the DHCP options configuration). The user is not able to ocnfigure pools with overlapped IP addresses. EndIPaddress can be configured different than StartIPAddress only when Client identifier is not set.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

cigDhcpServersPoolMode		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.4
Enable Dhcp Pool in the device. Default = False (Disable,Inactive). It is recommended to enable/activate the pool only after the user configures all the DHCP pool parameters. The user can changes the parameters when the pool is Enable/active. However part of the clients will have different configuration. After enabling the user will Disable the pool only before deleting it or keeping its ocnfiguration for later use. In Disable mode the binding information is lost. The user can not activate pool with start-ip-addr or end-ip-addr == 0.0.0.0.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

cigDhcpServersPoolName		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.5
Name of this Pool. Pool Default Name: 'Dhcp Pool #Pool Number'
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

cigDhcpServersPoolClientID		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.6
Client identifier used for manual leased. The strcuture of the client identifier is as follows: combination of TYPE and Data. Where Type = 01 if for Ethernet MACs and Data for this case if Ethernet MAC address. Default: '' - Null String. In this case no client identifier is defined. ClientIdentifier can only configured when cigDhcpServersPoolStartIPAddr is equal to cigDhcpServersPoolEndIPAddr.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..255)

cigDhcpServersPoolLeaseTime		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.7
The Pool leased time in seconds. Infinite is defined as 0xffffffff. default 691200 seconds = 8 days.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

cigDhcpServersPoolBootFile		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.8
BootFile Field in the Dhcp packet. Default Null String.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

cigDhcpServersPoolNextServer		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.9
Next Server Field in the Dhcp Packet. Default = 0.0.0.0
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

cigDhcpServersPoolSubnetMask		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.10
Subnet Mask is Dhcp option 1. Default = 255.255.255.0 There is no ability to configure this option in the general option table.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

cigDhcpServersPoolDefaultGateway		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.11
Default Gateway is Dhcp option 3. Default = '' = Null String. The format of the string can be up to 8 IP addresses, for exapmle: '121.23.1.12 135.64.13.190 192.123.242.230' There is no ability to configure this option in the general option table.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..145)

cigDhcpServersPoolDnsServer		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.12
DNS Server is Dhcp option 6. Default = '' = Null String. The format of the string can be up to 8 IP addresses, for exapmle: '121.23.1.12 135.64.13.190 192.123.242.230' There is no ability to configure this option in the general option table.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..145)

cigDhcpServersPoolDomainName		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.13
DNS Server is Dhcp option 15. Default = Null String The format of the string can be: 'avaya' There is no ability to configure this option in the general option table.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

cigDhcpServersPoolServerName		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.14
Optional Server Name. Default Null String.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..64)

cigDhcpServersPoolRowStatus		1.3.6.1.4.1.6889.2.1.16.2.2.1.1.15
Used to create/delete a DHCP pool entry. The following values will be supported: - `active', which indicates that the conceptual row is available for use by the managed device; - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

cigDhcpServersPoolGenOptionTable		1.3.6.1.4.1.6889.2.1.16.2.2.2
Dhcp Pool General Option configuration table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CigDhcpServersPoolGenOptionEntry

cigDhcpServersPoolGenOptionEntry		1.3.6.1.4.1.6889.2.1.16.2.2.2.1
The pool general option configuration table entry. The following option numbers are not configurable: Specific Options defined in the pool table: Option 1 - Subnet Mask Option 3 - Default Gateway Option 6 - Dns Servers Option 15 - Dns Name General Options that are not configurable according RFC2131, 2132: Option 0 - Pad Option Option 50 - Requested IP Address Option 51 - IP address Lease Time Option 52 - Option Overload Option 53 - Message Type Option 54 - Server Identifier Option 55 - Parameter Request List Option 56 - Message Option 57 - Maximum DHCP Message Size Option 58 - Renewal (T1) Time Value Option 59 - Rebinding (T2) Time Value Option 60 - Vendor Class Identifier Option 61 - Client Identifier Option 255 - End Option
Status: current	Access: not-accessible
OBJECT-TYPE
	CigDhcpServersPoolGenOptionEntry

cigDhcpServersOptionPoolIndex		1.3.6.1.4.1.6889.2.1.16.2.2.2.1.1
The DHCP Pool Index
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

cigDhcpServersOptionIndex		1.3.6.1.4.1.6889.2.1.16.2.2.2.1.2
The DHCP Option Index.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

cigDhcpServersOptionName		1.3.6.1.4.1.6889.2.1.16.2.2.2.1.3
Name of this DHCP option. Option Default Name: 'Option #Option Number'
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..31)

cigDhcpServersOptionType		1.3.6.1.4.1.6889.2.1.16.2.2.2.1.4
The type of the DHCP option: ascii(1) is ASCII String as 'Avaya' hex(2) is HEX String as 'aa:bb:cc:dd:12:34:56' ipAddresses(3) can be array of up to 8 IP addresses with the structure as: '121.23.1.12 135.64.13.190 192.123.242.230' integer(4) - unsigned 32 bits integer word(5) - unsigned 16 bits integer The defaults of cigDhcpServersOptionValue shall be changed according setting the type. If setting Type == ascii(1) then the default is '' If setting Type == hex(2) then the default is '' If setting Type == ipAddresses(3) then the default is '0.0.0.0' If setting Type == integer(4) then the default is '00000000' If setting Type == word(5) then the default is '0000'
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ascii(1), hex(2), ipAddresses(3), integer(4), word(5)

cigDhcpServersOptionValue		1.3.6.1.4.1.6889.2.1.16.2.2.2.1.5
The Value of the DHCP option according the TYPE field. Maximum length is 255B in case of ascii or hex, 145B for ipaddresses, 4B for integer and 2B for word.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..255)

cigDhcpServersOptionRowStatus		1.3.6.1.4.1.6889.2.1.16.2.2.2.1.6
Used to create/delete a DHCP option entry. The following values will be supported: - `active', which indicates that the conceptual row is available for use by the managed device; - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

cigDhcpServersPoolVendorSpecificOptionTable		1.3.6.1.4.1.6889.2.1.16.2.2.3
Dhcp Pool Vendor Specific Option configuration table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CigDhcpServersPoolVendorSpecificOptionEntry

cigDhcpServersPoolVendorSpecificOptionEntry		1.3.6.1.4.1.6889.2.1.16.2.2.3.1
The pool Vendor Specific option configuration table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CigDhcpServersPoolVendorSpecificOptionEntry

cigDhcpServersVendorSpecificOptionPoolIndex		1.3.6.1.4.1.6889.2.1.16.2.2.3.1.1
The DHCP Pool Index
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

cigDhcpServersVendorSpecificOptionIndex		1.3.6.1.4.1.6889.2.1.16.2.2.3.1.2
The DHCP Vendor Specific Option Index. G250/G350 - Up to 10 Vendor Specific options are allowed.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

cigDhcpServersVendorSpecificOptionName		1.3.6.1.4.1.6889.2.1.16.2.2.3.1.3
Name of this DHCP Vednor specififc option. Vendor Specific Option Default Name: 'Vendor Specififc Option #Index Number'
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..31)

cigDhcpServersVendorSpecificClassIdentifier		1.3.6.1.4.1.6889.2.1.16.2.2.3.1.4
The vendor specific class identifier which transmit in option 60 by the client. Default is null string
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..255)

cigDhcpServersVendorSpecificOptionType		1.3.6.1.4.1.6889.2.1.16.2.2.3.1.5
The type of the DHCP vendor specififc option: ascii(1) is ASCII String as 'Avaya' hex(2) is HEX String as 'aa:bb:cc:dd:12:34:56' The defaults of cigDhcpServersVendorSpecificOptionValue shall be changed according setting the type. If setting Type == ascii(1) then the default is '' If setting Type == hex(2) then the default is ''
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ascii(1), hex(2)

cigDhcpServersVendorSpecificOptionValue		1.3.6.1.4.1.6889.2.1.16.2.2.3.1.6
The Value of the DHCP vendor specififc option according the Type field. Maximum length is 255B in case of ascii or hex.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..255)

cigDhcpServersVendorSpecificOptionRowStatus		1.3.6.1.4.1.6889.2.1.16.2.2.3.1.7
Used to create/delete a DHCP Vendor Specific option entry. The following values will be supported: - `active', which indicates that the conceptual row is available for use by the managed device; - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

cigDhcpServersGenStats		1.3.6.1.4.1.6889.2.1.16.2.3
OBJECT IDENTIFIER

cigDhcpServersBootRequests		1.3.6.1.4.1.6889.2.1.16.2.3.1
Number of Boot Requests packets. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpServersDhcpDiscovers		1.3.6.1.4.1.6889.2.1.16.2.3.2
Number of Dhcp Discovers packets. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpServersDhcpRequests		1.3.6.1.4.1.6889.2.1.16.2.3.3
Number of Dhcp Requests packets. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpServersDhcpDeclines		1.3.6.1.4.1.6889.2.1.16.2.3.4
Number of Dhcp Declines packets. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpServersDhcpReleases		1.3.6.1.4.1.6889.2.1.16.2.3.5
Number of Dhcp Releases packets. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpServersDhcpInforms		1.3.6.1.4.1.6889.2.1.16.2.3.6
Number of Dhcp Informs packets. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpServersBootReplies		1.3.6.1.4.1.6889.2.1.16.2.3.7
Number of Boot Replies packets. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpServersDhcpOffers		1.3.6.1.4.1.6889.2.1.16.2.3.8
Number of Dhcp Offers packets. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpServersDhcpAcks		1.3.6.1.4.1.6889.2.1.16.2.3.9
Number of Dhcp Acknowledges packets. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpServersDhcpNacks		1.3.6.1.4.1.6889.2.1.16.2.3.10
Number of Dhcp Nacks packets. Default = 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpServersNotificationPacket		1.3.6.1.4.1.6889.2.1.16.2.4
OBJECT IDENTIFIER

cigDhcpServersNotificationIpAddr		1.3.6.1.4.1.6889.2.1.16.2.4.1
The relevant allocated IP address in DHCP/Bootp packet. Default = 0.0.0.0
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

cigDhcpServersNotificationClientIdentifier		1.3.6.1.4.1.6889.2.1.16.2.4.2
The Client identifier used in the DHCP packet. The strcuture of the client identifier is as follows: combination of TYPE and Data. Where Type = 01 if for Ethernet MACs and Data for this case if Ethernet MAC address. Default: 01000000000000
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	OCTET STRING	Size(0..255)

cigDhcpServersNotificationClientHostName		1.3.6.1.4.1.6889.2.1.16.2.4.3
This mib item presents the Client Host name as send by client packet in option 12.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	OCTET STRING	Size(0..255)

cigDhcpServersNotificationConflictDetectionMethod		1.3.6.1.4.1.6889.2.1.16.2.4.4
The method which the DHCP server detect conflict. Using ping message by DHCP server or recieving Decline packet from the client as response to client gratuitous ARP.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	ping(1), gratuitousArp(2), notSupported(255)

cigDhcpServersNotificationPoolNetwork		1.3.6.1.4.1.6889.2.1.16.2.4.5
This mib item presents cases where no IP address left for specific network. The network exhausted is the pool start/stop IP address AND subnet mask
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor