CIENA-CES-RSVPTE-MIB

File: CIENA-CES-RSVPTE-MIB.mib (16841 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC CIENA-TC
CIENA-SMI

Imported symbols

TimeTicks Integer32 Unsigned32
IpAddress OBJECT-TYPE MODULE-IDENTITY
DisplayString MacAddress RowStatus
TruthValue TEXTUAL-CONVENTION CienaGlobalState
cienaCesConfig cienaCesNotifications

Defined Types

AdvertisedLabel  
Advertised Label
TEXTUAL-CONVENTION    
  INTEGER implicitnull(1), nonreserved(99)  

RsvpOperStatus  
The current operational state of RSVP-TE.
TEXTUAL-CONVENTION    
  INTEGER operStatusUp(1), operStatusDown(2), operStatusGoingUp(3), operStatusGoingDown(4), operStatusActFailed(5)  

RsvpGRMode  
The current GR operational state of RSVP-TE.
TEXTUAL-CONVENTION    
  INTEGER helpNeighbor(1), restartCapable(2), notApplicable(3)  

CienaCesRsvpteIfEntry  
SEQUENCE    
  cienaCesRsvpteIfIndex INTEGER
  cienaCesRsvpteIfName OCTET STRING
  cienaCesRsvpteIfIpAddr IpAddress
  cienaCesRsvpteIfMtu INTEGER
  cienaCesRsvpteIfAdminStatus CienaGlobalState
  cienaCesRsvpteIfOperStatus INTEGER
  cienaCesRsvpteIfHelloInterval Unsigned32
  cienaCesRsvpteIfHelloTolerance Unsigned32
  cienaCesRsvpteIfAdvertisedLabel AdvertisedLabel

Defined Values

cienaCesRsvpteMIB 1.3.6.1.4.1.1271.2.1.16
This MIB module is for the RSVP-TE configuration for MPLS tunnels
MODULE-IDENTITY    

cienaCesRsvpteMIBObjects 1.3.6.1.4.1.1271.2.1.16.1
OBJECT IDENTIFIER    

cienaCesRsvpteObjects 1.3.6.1.4.1.1271.2.1.16.1.1
OBJECT IDENTIFIER    

cienaCesRsvpte 1.3.6.1.4.1.1271.2.1.16.1.2
OBJECT IDENTIFIER    

cienaCesRsvpteAdminStatus 1.3.6.1.4.1.1271.2.1.16.1.1.1
The desired administrative status of RSVP-TE.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesRsvpteOperStatus 1.3.6.1.4.1.1271.2.1.16.1.1.2
The current operational status of RSVP-TE.
Status: current Access: read-only
OBJECT-TYPE    
  RsvpOperStatus  

cienaCesRsvpteRetryInterval 1.3.6.1.4.1.1271.2.1.16.1.1.3
The persistent tunnel retry interval. This is the interval between the first failure of a persistent tunnel and the first attempt to re-establish the tunnel. This cannot be changed while the administrative status is enabled or the operational status is up.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 3..65  

cienaCesRsvpteRetryInfiniteState 1.3.6.1.4.1.1271.2.1.16.1.1.4
The persistent tunnel retry infinity. This is the state which when on, triggers RSVP-TE to try to restore the tunnels infinite times. This object can only be set if RSVP-TE is globally disabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesRsvpteRetryMax 1.3.6.1.4.1.1271.2.1.16.1.1.5
The maximum number of retry attempts that will be made before a persistent tunnel is deemed inoperable. Once in this state, a management agent should set mplsTunnelAdminStatus to 'up' to attempt to re-establish the tunnel. This field is not used when cienaCesRsvpteRetryInfiniteState is on.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cienaCesRsvpteRefreshInterval 1.3.6.1.4.1.1271.2.1.16.1.1.6
The RSVP-TE value, R, which is used to set the average interval between refresh path and RESV messages.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesRsvpteRefreshMultiple 1.3.6.1.4.1.1271.2.1.16.1.1.7
The RSVP-TE value, K, which is the number of unresponded path or RESV refresh attempts that must be made, spaced by the refresh interval, before the state is deemed to have timed out.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..214783647  

cienaCesRsvpteRfrshSlewDenom 1.3.6.1.4.1.1271.2.1.16.1.1.8
This object is deprecated and the new object to provide this information is cienaCesRsvpteRefreshSlewDenominator in this table.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32 1..214783647  

cienaCesRsvpteRfrshSlewNumerator 1.3.6.1.4.1.1271.2.1.16.1.1.9
This object is deprecated and the new object to provide this information is cienaCesRsvpteRefreshSlewNumerator in this table.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32 1..214783647  

cienaCesRsvpteBlockadeMultiple 1.3.6.1.4.1.1271.2.1.16.1.1.10
The RSVP-TE value, Kb, which is the number of refresh timeout periods after which the blockade state is deleted.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..214783647  

cienaCesRsvpteLSPSetupPriority 1.3.6.1.4.1.1271.2.1.16.1.1.11
The setup priority to apply to LSPs that are not signaling this parameter. 0 represents the highest priority and 7 the lowest. The value of this object must be numerically greater than or equal to (lower or equal priority) than the value of the holding priority object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

cienaCesRsvpteLSPHoldingPriority 1.3.6.1.4.1.1271.2.1.16.1.1.12
The holding priority to apply to LSPs that are not signaling this parameter. 0 represents the highest priority and 7 the lowest. The value of this object must be numerically less than or equal to (higher or equal priority) than the value of the holding priority object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

cienaCesRsvpteUseHopByHop 1.3.6.1.4.1.1271.2.1.16.1.1.13
A flag to indicate that RSVP-TE should use the hop by hop addressing scheme for the PATH and PATH-TEAR messages it sends. If set, then the IP addresses used in the IP header of the PATH messages forwarded by RSVP-TE set the source as the local outgoing interface IP address, and set the destination as the next hop router IP address.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cienaCesRsvpteRestartCapable 1.3.6.1.4.1.1271.2.1.16.1.1.14
A flag to indicate whether the local node should advertise itself as restart capable.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cienaCesRsvpteRestartTime 1.3.6.1.4.1.1271.2.1.16.1.1.15
The time in milliseconds that the local node takes to restart RSVP-TE and the communication channel used for RSVP-TE communication. This is advertised to neighbors in the Restart_Cap object in Hello messages. Only used if cienaCesRsvpteRestartCapable is set to true. For devices which only act as the Helper node, this timer is unused and will return value 0.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesRsvpteRecoveryTime 1.3.6.1.4.1.1271.2.1.16.1.1.16
The period of time in milliseconds that the local node would like neighbors to take to resyncronize RSVP-TE and MPLS forwarding information after the re-establishment of Hello connectivity. This is advertised to neighbors in the Restart_Cap object in Hello messages. A value of zero indicates that the node does not support resynchronization following failure of the local node. A value of 0xFFFFFFFF indicates an infinite recovery time. Only used if cienaCesRsvpteRestartCapable is set to true. For devices which only act as the Helper node, this timer is unused and will return value 0.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesRsvpteMinPeerRestart 1.3.6.1.4.1.1271.2.1.16.1.1.17
The mininum period of time in milliseconds that RSVP-TE should wait for a restart capable neighbor to regain Hello connectivity before invoking procedures related to communication loss. RSVP-TE waits for the maximum of this time and the restart_time advertised in the RESTART_CAP object in Hello messages from the neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesRsvpteRefreshSlewDenominator 1.3.6.1.4.1.1271.2.1.16.1.1.18
The denominator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..214783647  

cienaCesRsvpteRefreshSlewNumerator 1.3.6.1.4.1.1271.2.1.16.1.1.19
The numerator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..214783647  

cienaCesRsvpteGRAdminStatus 1.3.6.1.4.1.1271.2.1.16.1.1.20
RSVP-TE Graceful restart status (Enabled/Disabled).
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesRsvpteGRMode 1.3.6.1.4.1.1271.2.1.16.1.1.21
RSVP-TE Graceful restart Operational status.
Status: current Access: read-only
OBJECT-TYPE    
  RsvpGRMode  

cienaCesRsvpteIfTable 1.3.6.1.4.1.1271.2.1.16.1.2.1
A table of interfaces on which RSVP-TE can be enabled.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesRsvpteIfEntry

cienaCesRsvpteIfEntry 1.3.6.1.4.1.1271.2.1.16.1.2.1.1
An entry in the RSVP-TE interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesRsvpteIfEntry  

cienaCesRsvpteIfIndex 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.1
Interface index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4096  

cienaCesRsvpteIfName 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.2
Interface name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

cienaCesRsvpteIfIpAddr 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.3
Interface IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesRsvpteIfMtu 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.4
This object is deprecated and no longer in use.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1500..9216  

cienaCesRsvpteIfAdminStatus 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.5
RSVP-TE administrative status on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesRsvpteIfOperStatus 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.6
RSVP-TE operational status on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

cienaCesRsvpteIfHelloInterval 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.7
RSVP-TE Hello message interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..30  

cienaCesRsvpteIfHelloTolerance 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.8
RSVP-TE Hello tolerance defines the number of Hello intervals that can pass without receiving a successful Hello message from a partner before the Hello session times out.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..10  

cienaCesRsvpteIfAdvertisedLabel 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.9
This object indicates what kind of label will be advertised by RSVP-TE for a Label Request received on this L3 interface.
Status: current Access: read-only
OBJECT-TYPE    
  AdvertisedLabel