CIENA-CES-RADIUS-CLIENT-MIB

File: CIENA-CES-RADIUS-CLIENT-MIB.mib (67929 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC CIENA-SMI
CIENA-TC INET-ADDRESS-MIB

Imported symbols

Counter32 Gauge32 IpAddress
Unsigned32 Integer32 TimeTicks
OBJECT-TYPE MODULE-IDENTITY DisplayString
RowStatus TruthValue TEXTUAL-CONVENTION
cienaCesStatistics CienaGlobalState InetAddressType
InetAddress

Defined Types

RadiusString  
Used to represent the RADIUS authentication string.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0|8..64)  

CienaCesRadiusClientServerEntry  
SEQUENCE    
  cienaCesRadiusClientServerIndex Integer32
  cienaCesRadiusClientServerAddr DisplayString
  cienaCesRadiusClientServerResolvedAddr IpAddress
  cienaCesRadiusClientServerPriority Integer32
  cienaCesRadiusClientServerAuthPort Integer32
  cienaCesRadiusClientServerRoundTripTime TimeTicks
  cienaCesRadiusClientServerAccessRequests Counter32
  cienaCesRadiusClientServerAccessRetransmissions Counter32
  cienaCesRadiusClientServerAccessAccepts Counter32
  cienaCesRadiusClientServerAccessRejects Counter32
  cienaCesRadiusClientServerAccessChallenges Counter32
  cienaCesRadiusClientServerMalformedAccessResponses Counter32
  cienaCesRadiusClientServerBadAuthenticators Counter32
  cienaCesRadiusClientServerPendingRequests Gauge32
  cienaCesRadiusClientServerTimeouts Counter32
  cienaCesRadiusClientServerUnknownTypes Counter32
  cienaCesRadiusClientServerPacketsDropped Counter32
  cienaCesRadiusClientServerApplication INTEGER
  cienaCesRadiusClientServerStatus RowStatus

CienaCesRadiusUserLoginEntry  
SEQUENCE    
  cienaCesRadiusUserLoginIndex Integer32
  cienaCesRadiusUserLoginResolvedInetAddrType InetAddressType
  cienaCesRadiusUserLoginResolvedInetAddress InetAddress
  cienaCesRadiusUserLoginAddr DisplayString
  cienaCesRadiusUserLoginPriority Integer32
  cienaCesRadiusUserLoginAuthPort Integer32
  cienaCesRadiusUserLoginClearStatistics TruthValue
  cienaCesRadiusUserLoginRoundTripTime TimeTicks
  cienaCesRadiusUserLoginRequests Counter32
  cienaCesRadiusUserLoginRetransmissions Counter32
  cienaCesRadiusUserLoginAccessAccepts Counter32
  cienaCesRadiusUserLoginAccessRejects Counter32
  cienaCesRadiusUserLoginAccessChallenges Counter32
  cienaCesRadiusUserLoginAccountingResponses Counter32
  cienaCesRadiusUserLoginMalformedResponses Counter32
  cienaCesRadiusUserLoginBadAuthenticators Counter32
  cienaCesRadiusUserLoginTimeouts Counter32
  cienaCesRadiusUserLoginUnknownTypes Counter32
  cienaCesRadiusUserLoginPacketsDropped Counter32
  cienaCesRadiusUserLoginStatus RowStatus

CienaCesRadiusUserLoginAcctEntry  
SEQUENCE    
  cienaCesRadiusUserLoginAcctIndex Integer32
  cienaCesRadiusUserLoginAcctResolvedInetAddrType InetAddressType
  cienaCesRadiusUserLoginAcctResolvedInetAddress InetAddress
  cienaCesRadiusUserLoginAcctAddr DisplayString
  cienaCesRadiusUserLoginAcctPriority Integer32
  cienaCesRadiusUserLoginAcctAuthPort Integer32
  cienaCesRadiusUserLoginAcctClearStatistics TruthValue
  cienaCesRadiusUserLoginAcctRoundTripTime TimeTicks
  cienaCesRadiusUserLoginAcctRequests Counter32
  cienaCesRadiusUserLoginAcctRetransmissions Counter32
  cienaCesRadiusUserLoginAcctAccessAccepts Counter32
  cienaCesRadiusUserLoginAcctAccessRejects Counter32
  cienaCesRadiusUserLoginAcctAccessChallenges Counter32
  cienaCesRadiusUserLoginAcctAccountingResponses Counter32
  cienaCesRadiusUserLoginAcctMalformedResponses Counter32
  cienaCesRadiusUserLoginAcctBadAuthenticators Counter32
  cienaCesRadiusUserLoginAcctTimeouts Counter32
  cienaCesRadiusUserLoginAcctUnknownTypes Counter32
  cienaCesRadiusUserLoginAcctPacketsDropped Counter32
  cienaCesRadiusUserLoginAcctStatus RowStatus

CienaCesRadiusDot1xAuthEntry  
SEQUENCE    
  cienaCesRadiusDot1xAuthIndex Integer32
  cienaCesRadiusDot1xAuthResolvedInetAddrType InetAddressType
  cienaCesRadiusDot1xAuthResolvedInetAddress InetAddress
  cienaCesRadiusDot1xAuthAddr DisplayString
  cienaCesRadiusDot1xAuthPriority Integer32
  cienaCesRadiusDot1xAuthAuthPort Integer32
  cienaCesRadiusDot1xAuthClearStatistics TruthValue
  cienaCesRadiusDot1xAuthGreylistTimeRemaining Unsigned32
  cienaCesRadiusDot1xAuthRoundTripTime TimeTicks
  cienaCesRadiusDot1xAuthRequests Counter32
  cienaCesRadiusDot1xAuthRetransmissions Counter32
  cienaCesRadiusDot1xAuthAccessAccepts Counter32
  cienaCesRadiusDot1xAuthAccessRejects Counter32
  cienaCesRadiusDot1xAuthAccessChallenges Counter32
  cienaCesRadiusDot1xAuthAccountingResponses Counter32
  cienaCesRadiusDot1xAuthMalformedResponses Counter32
  cienaCesRadiusDot1xAuthBadAuthenticators Counter32
  cienaCesRadiusDot1xAuthTimeouts Counter32
  cienaCesRadiusDot1xAuthUnknownTypes Counter32
  cienaCesRadiusDot1xAuthPacketsDropped Counter32
  cienaCesRadiusDot1xAuthStatus RowStatus

CienaCesRadiusDot1xAcctEntry  
SEQUENCE    
  cienaCesRadiusDot1xAcctIndex Integer32
  cienaCesRadiusDot1xAcctResolvedInetAddrType InetAddressType
  cienaCesRadiusDot1xAcctResolvedInetAddress InetAddress
  cienaCesRadiusDot1xAcctAddr DisplayString
  cienaCesRadiusDot1xAcctPriority Integer32
  cienaCesRadiusDot1xAcctAuthPort Integer32
  cienaCesRadiusDot1xAcctClearStatistics TruthValue
  cienaCesRadiusDot1xAcctGreylistTimeRemaining Unsigned32
  cienaCesRadiusDot1xAcctRoundTripTime TimeTicks
  cienaCesRadiusDot1xAcctRequests Counter32
  cienaCesRadiusDot1xAcctRetransmissions Counter32
  cienaCesRadiusDot1xAcctAccessAccepts Counter32
  cienaCesRadiusDot1xAcctAccessRejects Counter32
  cienaCesRadiusDot1xAcctAccessChallenges Counter32
  cienaCesRadiusDot1xAcctAccountingResponses Counter32
  cienaCesRadiusDot1xAcctMalformedResponses Counter32
  cienaCesRadiusDot1xAcctBadAuthenticators Counter32
  cienaCesRadiusDot1xAcctTimeouts Counter32
  cienaCesRadiusDot1xAcctUnknownTypes Counter32
  cienaCesRadiusDot1xAcctPacketsDropped Counter32
  cienaCesRadiusDot1xAcctStatus RowStatus

Defined Values

cienaCesRadiusClientMIB 1.3.6.1.4.1.1271.2.3.3
This module defines the objects used by the RADIUS client.
MODULE-IDENTITY    

cienaCesRadiusClientMIBObjects 1.3.6.1.4.1.1271.2.3.3.1
OBJECT IDENTIFIER    

cienaCesRadiusClient 1.3.6.1.4.1.1271.2.3.3.1.1
OBJECT IDENTIFIER    

cienaCesRadiusClientGlobal 1.3.6.1.4.1.1271.2.3.3.1.1.1
OBJECT IDENTIFIER    

cienaCesRadiusClientServer 1.3.6.1.4.1.1271.2.3.3.1.1.2
OBJECT IDENTIFIER    

cienaCesRadiusUserLogin 1.3.6.1.4.1.1271.2.3.3.1.1.3
OBJECT IDENTIFIER    

cienaCesRadiusUserLoginGlobal 1.3.6.1.4.1.1271.2.3.3.1.1.3.1
OBJECT IDENTIFIER    

cienaCesRadiusDot1xAuth 1.3.6.1.4.1.1271.2.3.3.1.1.4
OBJECT IDENTIFIER    

cienaCesRadiusDot1xAuthGlobal 1.3.6.1.4.1.1271.2.3.3.1.1.4.1
OBJECT IDENTIFIER    

cienaCesRadiusDot1xAcct 1.3.6.1.4.1.1271.2.3.3.1.1.5
OBJECT IDENTIFIER    

cienaCesRadiusDot1xAcctGlobal 1.3.6.1.4.1.1271.2.3.3.1.1.5.1
OBJECT IDENTIFIER    

cienaCesRadiusUserLoginAcct 1.3.6.1.4.1.1271.2.3.3.1.1.6
OBJECT IDENTIFIER    

cienaCesRadiusUserLoginAcctGlobal 1.3.6.1.4.1.1271.2.3.3.1.1.6.1
OBJECT IDENTIFIER    

cienaCesRadiusClientMIBNotificationPrefix 1.3.6.1.4.1.1271.2.3.3.2
OBJECT IDENTIFIER    

cienaCesRadiusClientMIBNotifications 1.3.6.1.4.1.1271.2.3.3.2.0
OBJECT IDENTIFIER    

cienaCesRadiusClientMIBConformance 1.3.6.1.4.1.1271.2.3.3.3
OBJECT IDENTIFIER    

cienaCesRadiusClientMIBCompliances 1.3.6.1.4.1.1271.2.3.3.3.1
OBJECT IDENTIFIER    

cienaCesRadiusClientMIBGroups 1.3.6.1.4.1.1271.2.3.3.3.2
OBJECT IDENTIFIER    

cienaCesRadiusAdminState 1.3.6.1.4.1.1271.2.3.3.1.1.1.1
Setting this object administratively enables or disables the RADIUS client.
Status: current Access: read-write
OBJECT-TYPE    
  CienaGlobalState  

cienaCesRadiusOperState 1.3.6.1.4.1.1271.2.3.3.1.1.1.2
This object returns the operational state of the RADIUS client.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesRadiusClientTimeout 1.3.6.1.4.1.1271.2.3.3.1.1.1.3
This is the time in seconds between re-transmissions to the RADIUS server.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32 1..30  

cienaCesRadiusClientRetries 1.3.6.1.4.1.1271.2.3.3.1.1.1.4
Indicates the number of times the RADIUS server should be tried before giving up on the server.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

cienaCesRadiusClientAuthKey 1.3.6.1.4.1.1271.2.3.3.1.1.1.5
The authenticaion key to be used for RADIUS servers. Retrieving the value of this object via SNMP returns an empty string for security reasons.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RadiusString  

cienaCesRadiusClientAuthKeyUnset 1.3.6.1.4.1.1271.2.3.3.1.1.1.6
Setting this object to true clears the value of cienaCesRadiusClientAuthKey. Reading this object always returns a value of false.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

cienaCesRadiusClientSearchType 1.3.6.1.4.1.1271.2.3.3.1.1.1.7
This object sets the search type of the RADIUS client.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER cached(1), priority(2)  

cienaCesRadiusClientServerTable 1.3.6.1.4.1.1271.2.3.3.1.1.2.1
Lists the possible RADIUS servers. While creating an entry, cienaCesRadiusRadiusClientServerStatus and cienaCesRadiusClientServerAddr must be specified. The SNMP multiple set operation must be used to create an entry.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesRadiusClientServerEntry

cienaCesRadiusClientServerEntry 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1
RADIUS server entry.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  CienaCesRadiusClientServerEntry  

cienaCesRadiusClientServerIndex 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.1
Specifies the index of this table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  Integer32 1..8  

cienaCesRadiusClientServerAddr 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.2
Host name or IP address of the RADIUS server.
Status: deprecated Access: read-create
OBJECT-TYPE    
  DisplayString  

cienaCesRadiusClientServerResolvedAddr 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.3
Specifies the resolved IP address if cienaCesRadiusClientServerAddr is set to host name. If cienaCesRadiusClientServerAddr is set to IP address, then cienaCesRadiusClientServerResolvedAddr contains the same information as cienaCesRadiusClientServerAddr.
Status: deprecated Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesRadiusClientServerPriority 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.4
Specifies the priority of RADIUS servers configured on the device.
Status: deprecated Access: read-create
OBJECT-TYPE    
  Integer32  

cienaCesRadiusClientServerAuthPort 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.5
The destination UDP port number to which RADIUS messages should be sent. The RADIUS server is not used for authentication if this port number is 0.
Status: deprecated Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesRadiusClientServerRoundTripTime 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.6
The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.
Status: deprecated Access: read-only
OBJECT-TYPE    
  TimeTicks  

cienaCesRadiusClientServerAccessRequests 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.7
The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusClientServerAccessRetransmissions 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.8
The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusClientServerAccessAccepts 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.9
The number of RADIUS Access-Accept packets (valid or invalid) received from this server.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusClientServerAccessRejects 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.10
The number of RADIUS Access-Reject packets (valid or invalid) received from this server.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusClientServerAccessChallenges 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.11
The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusClientServerMalformedAccessResponses 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.12
The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusClientServerBadAuthenticators 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.13
The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusClientServerPendingRequests 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.14
The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Access-Accept, Access-Reject, Access-Challenge, a timeout, or retransmission.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesRadiusClientServerTimeouts 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.15
The number of authentication timeouts to this server. After a timeout the client may retry sending to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a request as well as a timeout.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusClientServerUnknownTypes 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.16
The number of RADIUS packets of unknown type which were received from this server on the authentication port.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusClientServerPacketsDropped 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.17
The number of RADIUS packets which were received from this server on the authentication port and dropped for some other reason.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusClientServerApplication 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.18
This object specifies how the RADIUS server should be used for authentication.
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER userLogin(1), all(2)  

cienaCesRadiusClientServerStatus 1.3.6.1.4.1.1271.2.3.3.1.1.2.1.1.19
To create a row in this table, a manager must set this object to createAndGo(4). To create an entry, cienaCesRadiusClientServerStatus and cienaCesRadiusClientServerAddr must be specified. The SNMP multiple set operation must be used to create the entry. To disable a RADIUS server, set the cienaCesRadiusClientServerStatus object to 'notInService' state.
Status: deprecated Access: read-create
OBJECT-TYPE    
  RowStatus  

cienaCesRadiusUserLoginTimeout 1.3.6.1.4.1.1271.2.3.3.1.1.3.1.1
This is the time in seconds between re-transmissions to the RADIUS server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..30  

cienaCesRadiusUserLoginRetries 1.3.6.1.4.1.1271.2.3.3.1.1.3.1.2
Indicates the number of times the RADIUS server should be tried before giving up on the server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

cienaCesRadiusUserLoginAuthKey 1.3.6.1.4.1.1271.2.3.3.1.1.3.1.3
The authenticaion key to be used for RADIUS servers. Retrieving the value of this object via SNMP returns an empty string for security reasons.
Status: current Access: read-write
OBJECT-TYPE    
  RadiusString  

cienaCesRadiusUserLoginSearchType 1.3.6.1.4.1.1271.2.3.3.1.1.3.1.4
This object sets the search type of the RADIUS client.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cached(1), priority(2)  

cienaCesRadiusUserLoginAuthSecret 1.3.6.1.4.1.1271.2.3.3.1.1.3.1.5
Used to set the pre-encrypted secret for user-login auth. When read, this object returns the encrypted secret.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..259)  

cienaCesRadiusUserLoginTable 1.3.6.1.4.1.1271.2.3.3.1.1.3.2
Lists the possible RADIUS user login servers. While creating an entry, cienaCesRadiusUserLoginStatus and cienaCesRadiusUserLoginAddr must be specified. The SNMP multiple set operation must be used to create an entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesRadiusUserLoginEntry

cienaCesRadiusUserLoginEntry 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1
RADIUS user login entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesRadiusUserLoginEntry  

cienaCesRadiusUserLoginIndex 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.1
Specifies the index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..8  

cienaCesRadiusUserLoginResolvedInetAddrType 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.2
Specifies the resolved IP address type. This OID is used in conjunction with cienaCesRadiusUserLoginInetAddrress. When set to : ipv4 : cienaCesRadiusUserLoginResolvedInetAddress should be compliant with InetAddressIPv4 ipv6 : cienaCesRadiusUserLoginResolvedInetAddress should be compliant with InetAddressIPv6
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cienaCesRadiusUserLoginResolvedInetAddress 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.3
Specifies the resolved IP address if cienaCesRadiusUserLoginAddr is set to host name. If cienaCesRadiusUserLoginAddr is set to ip address then cienaCesRadiusUserLoginResolvedInetAddress will contain same information as cienaCesRadiusUserLoginAddr. This OID should be used in conjuction with cienaCesRadiusUserLoginResolvedInetAddrType.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

cienaCesRadiusUserLoginAddr 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.4
Host name or IP address of the RADIUS server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

cienaCesRadiusUserLoginPriority 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.5
Specifies the priority of RADIUS servers configured on the device.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

cienaCesRadiusUserLoginAuthPort 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.6
The destination UDP port number to which RADIUS messages should be sent. The RADIUS server is not used for authentication if this port number is 0.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesRadiusUserLoginClearStatistics 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.7
This object clears the statistics for a server.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cienaCesRadiusUserLoginRoundTripTime 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.8
The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

cienaCesRadiusUserLoginRequests 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.9
The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginRetransmissions 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.10
The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAccessAccepts 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.11
The number of RADIUS Access-Accept packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAccessRejects 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.12
The number of RADIUS Access-Reject packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAccessChallenges 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.13
The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAccountingResponses 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.14
The number of RADIUS Accounting-Response packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginMalformedResponses 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.15
The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginBadAuthenticators 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.16
The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginTimeouts 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.17
The number of authentication timeouts to this server. After a timeout the client may retry sending to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a request as well as a timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginUnknownTypes 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.18
The number of RADIUS packets of unknown type which were received from this server on the authentication port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginPacketsDropped 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.19
The number of RADIUS packets which were received from this server on the authentication port and dropped for some other reason.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginStatus 1.3.6.1.4.1.1271.2.3.3.1.1.3.2.1.20
To create a row in this table, a manager must specify cienaCesRadiusUserLoginAddr and set this object to createAndGo(4). The RADIUS server will initially be administratively disabled. To administratively enable the RADIUS server, set this object to active(1). To administratively disable the RADIUS server set this object to notInService(2).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cienaCesRadiusUserLoginAcctAdminState 1.3.6.1.4.1.1271.2.3.3.1.1.6.1.1
Setting this object administratively enables/disables the RADIUS user login accounting client on the device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cienaCesRadiusUserLoginAcctTimeout 1.3.6.1.4.1.1271.2.3.3.1.1.6.1.2
This is the time in seconds between re-transmissions to the RADIUS server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..30  

cienaCesRadiusUserLoginAcctRetries 1.3.6.1.4.1.1271.2.3.3.1.1.6.1.3
Indicates the number of times the RADIUS server should be tried before giving up on the server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

cienaCesRadiusUserLoginAcctAuthKey 1.3.6.1.4.1.1271.2.3.3.1.1.6.1.4
The authenticaion key to be used for RADIUS servers. Retrieving the value of this object via SNMP returns an empty string for security reasons.
Status: current Access: read-write
OBJECT-TYPE    
  RadiusString  

cienaCesRadiusUserLoginAcctSearchType 1.3.6.1.4.1.1271.2.3.3.1.1.6.1.5
This object sets the search type of the RADIUS client.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cached(1), priority(2)  

cienaCesRadiusUserLoginAcctAuthSecret 1.3.6.1.4.1.1271.2.3.3.1.1.6.1.6
Used to set the pre-encrypted secret for user-login accounting auth. When read, this object returns the encrypted secret.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..259)  

cienaCesRadiusUserLoginAcctTable 1.3.6.1.4.1.1271.2.3.3.1.1.6.2
Lists the possible RADIUS user login servers. While creating an entry, cienaCesRadiusUserLoginAcctStatus and cienaCesRadiusUserLoginAcctAddr must be specified. The SNMP multiple set operation must be used to create an entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesRadiusUserLoginAcctEntry

cienaCesRadiusUserLoginAcctEntry 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1
RADIUS user login entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesRadiusUserLoginAcctEntry  

cienaCesRadiusUserLoginAcctIndex 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.1
Specifies the index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..8  

cienaCesRadiusUserLoginAcctResolvedInetAddrType 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.2
Specifies the resolved IP address type. This OID is used in conjunction with cienaCesRadiusUserLoginAcctInetAddrress. When set to : ipv4 : cienaCesRadiusUserLoginAcctResolvedInetAddress should be compliant with InetAddressIPv4 ipv6 : cienaCesRadiusUserLoginAcctResolvedInetAddress should be compliant with InetAddressIPv6
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cienaCesRadiusUserLoginAcctResolvedInetAddress 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.3
Specifies the resolved IP address if cienaCesRadiusUserLoginAcctAddr is set to host name. If cienaCesRadiusUserLoginAcctAddr is set to ip address then cienaCesRadiusUserLoginAcctResolvedInetAddress will contain same information as cienaCesRadiusUserLoginAcctAddr. This OID should be used in conjuction with cienaCesRadiusUserLoginAcctResolvedInetAddrType.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

cienaCesRadiusUserLoginAcctAddr 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.4
Host name or IP address of the RADIUS server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

cienaCesRadiusUserLoginAcctPriority 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.5
Specifies the priority of RADIUS servers configured on the device.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

cienaCesRadiusUserLoginAcctAuthPort 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.6
The destination UDP port number to which RADIUS messages should be sent. The RADIUS server is not used for authentication if this port number is 0.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesRadiusUserLoginAcctClearStatistics 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.7
This object clears the statistics for a server.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cienaCesRadiusUserLoginAcctRoundTripTime 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.8
The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

cienaCesRadiusUserLoginAcctRequests 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.9
The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAcctRetransmissions 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.10
The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAcctAccessAccepts 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.11
The number of RADIUS Access-Accept packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAcctAccessRejects 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.12
The number of RADIUS Access-Reject packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAcctAccessChallenges 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.13
The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAcctAccountingResponses 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.14
The number of RADIUS Accounting-Response packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAcctMalformedResponses 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.15
The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAcctBadAuthenticators 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.16
The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAcctTimeouts 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.17
The number of authentication timeouts to this server. After a timeout the client may retry sending to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a request as well as a timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAcctUnknownTypes 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.18
The number of RADIUS packets of unknown type which were received from this server on the authentication port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAcctPacketsDropped 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.19
The number of RADIUS packets which were received from this server on the authentication port and dropped for some other reason.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusUserLoginAcctStatus 1.3.6.1.4.1.1271.2.3.3.1.1.6.2.1.20
To create a row in this table, a manager must specify cienaCesRadiusUserLoginAcctAddr and set this object to createAndGo(4). The RADIUS server will initially be administratively disabled. To administratively enable the RADIUS server, set this object to active(1). To administratively disable the RADIUS server set this object to notInService(2).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cienaCesRadiusDot1xAuthTimeout 1.3.6.1.4.1.1271.2.3.3.1.1.4.1.1
This is the time in seconds between re-transmissions to the RADIUS server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..30  

cienaCesRadiusDot1xAuthRetries 1.3.6.1.4.1.1271.2.3.3.1.1.4.1.2
Indicates the number of times the RADIUS server should be tried before giving up on the server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

cienaCesRadiusDot1xAuthAuthKey 1.3.6.1.4.1.1271.2.3.3.1.1.4.1.3
The authenticaion key to be used for RADIUS servers. Retrieving the value of this object via SNMP returns an empty string for security reasons.
Status: current Access: read-write
OBJECT-TYPE    
  RadiusString  

cienaCesRadiusDot1xAuthSearchType 1.3.6.1.4.1.1271.2.3.3.1.1.4.1.4
This object sets the search type of the RADIUS client.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER priority(1), loadBalance(2)  

cienaCesRadiusDot1xAuthGreylistTimeout 1.3.6.1.4.1.1271.2.3.3.1.1.4.1.5
The max greylist timeout for a RADIUS Dot1x Auth server between 1 minute and 4 hours.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 60..14400  

cienaCesRadiusDot1xAuthAuthSecret 1.3.6.1.4.1.1271.2.3.3.1.1.4.1.6
Used to set the pre-encrypted secret for dot1x auth. When read, this object returns the encrypted secret.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..259)  

cienaCesRadiusDot1xAuthTable 1.3.6.1.4.1.1271.2.3.3.1.1.4.2
Lists the possible RADIUS Dot1x auth servers. While creating an entry, cienaCesRadiusDot1xAuthStatus and cienaCesRadiusDot1xAuthAddr must be specified. The SNMP multiple set operation must be used to create an entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesRadiusDot1xAuthEntry

cienaCesRadiusDot1xAuthEntry 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1
RADIUS user login entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesRadiusDot1xAuthEntry  

cienaCesRadiusDot1xAuthIndex 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.1
Specifies the index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..8  

cienaCesRadiusDot1xAuthResolvedInetAddrType 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.2
Specifies the resolved IP address type. This OID is used in conjunction with cienaCesRadiusDot1xAuthInetAddrress. When set to : ipv4 : cienaCesRadiusDot1xAuthResolvedInetAddress should be compliant with InetAddressIPv4 ipv6 : cienaCesRadiusDot1xAuthResolvedInetAddress should be compliant with InetAddressIPv6
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cienaCesRadiusDot1xAuthResolvedInetAddress 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.3
Specifies the resolved IP address if cienaCesRadiusDot1xAuthAddr is set to host name. If cienaCesRadiusDot1xAuthAddr is set to ip address then cienaCesRadiusDot1xAuthResolvedInetAddress will contain same information as cienaCesRadiusDot1xAuthAddr. This OID should be used in conjuction with cienaCesRadiusDot1xAuthResolvedInetAddrType.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

cienaCesRadiusDot1xAuthAddr 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.4
Host name or IP address of the RADIUS server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

cienaCesRadiusDot1xAuthPriority 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.5
Specifies the priority of RADIUS servers configured on the device.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

cienaCesRadiusDot1xAuthAuthPort 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.6
The destination UDP port number to which RADIUS messages should be sent. The RADIUS server is not used for authentication if this port number is 0.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesRadiusDot1xAuthClearStatistics 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.7
This object clears the statistics for a server.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cienaCesRadiusDot1xAuthGreylistTimeRemaining 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.8
Reflects the remaining time before the server removed from the greylist. A value of '0' (zero) indicates the current server is not greylisted
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..14400  

cienaCesRadiusDot1xAuthRoundTripTime 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.9
The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

cienaCesRadiusDot1xAuthRequests 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.10
The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAuthRetransmissions 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.11
The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAuthAccessAccepts 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.12
The number of RADIUS Access-Accept packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAuthAccessRejects 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.13
The number of RADIUS Access-Reject packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAuthAccessChallenges 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.14
The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAuthAccountingResponses 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.15
The number of RADIUS Accounting-Response packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAuthMalformedResponses 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.16
The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAuthBadAuthenticators 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.17
The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAuthTimeouts 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.18
The number of authentication timeouts to this server. After a timeout the client may retry sending to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a request as well as a timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAuthUnknownTypes 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.19
The number of RADIUS packets of unknown type which were received from this server on the authentication port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAuthPacketsDropped 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.20
The number of RADIUS packets which were received from this server on the authentication port and dropped for some other reason.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAuthStatus 1.3.6.1.4.1.1271.2.3.3.1.1.4.2.1.21
To create a row in this table, a manager must specify cienaCesRadiusDot1xAuthAddr and set this object to createAndGo(4). The RADIUS server will initially be administratively disabled. To administratively enable the RADIUS server, set this object to active(1). To administratively disable the RADIUS server set this object to notInService(2).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cienaCesRadiusDot1xAcctAdminState 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.1
Setting this object administratively enables/disables the RADIUS Dot1x accounting client on the device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cienaCesRadiusDot1xAcctTimeout 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.2
This is the time in seconds between re-transmissions to the RADIUS server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..30  

cienaCesRadiusDot1xAcctRetries 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.3
Indicates the number of times the RADIUS server should be tried before giving up on the server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

cienaCesRadiusDot1xAcctAuthKey 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.4
The authenticaion key to be used for RADIUS servers. Retrieving the value of this object via SNMP returns an empty string for security reasons.
Status: current Access: read-write
OBJECT-TYPE    
  RadiusString  

cienaCesRadiusDot1xAcctSearchType 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.5
This object sets the search type of the RADIUS client.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER priority(1), loadBalance(2)  

cienaCesRadiusDot1xAcctGreylistTimeout 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.6
The max greylist timeout for a RADIUS Dot1x Acct server between 1 minute and 4 hours.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 60..14400  

cienaCesRadiusDot1xAcctAuthSecret 1.3.6.1.4.1.1271.2.3.3.1.1.5.1.7
Used to set the pre-encrypted secret for dot1x auth acct. When read, this object returns the encrypted secret.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..259)  

cienaCesRadiusDot1xAcctTable 1.3.6.1.4.1.1271.2.3.3.1.1.5.2
Lists the possible RADIUS Dot1x Acct servers. While creating an entry, cienaCesRadiusDot1xAcctStatus and cienaCesRadiusDot1xAcctAddr must be specified. The SNMP multiple set operation must be used to create an entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesRadiusDot1xAcctEntry

cienaCesRadiusDot1xAcctEntry 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1
RADIUS user login entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesRadiusDot1xAcctEntry  

cienaCesRadiusDot1xAcctIndex 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.1
Specifies the index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..8  

cienaCesRadiusDot1xAcctResolvedInetAddrType 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.2
Specifies the resolved IP address type. This OID is used in conjunction with cienaCesRadiusDot1xAcctInetAddrress. When set to : ipv4 : cienaCesRadiusDot1xAcctResolvedInetAddress should be compliant with InetAddressIPv4 ipv6 : cienaCesRadiusDot1xAcctResolvedInetAddress should be compliant with InetAddressIPv6
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cienaCesRadiusDot1xAcctResolvedInetAddress 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.3
Specifies the resolved IP address if cienaCesRadiusDot1xAcctAddr is set to host name. If cienaCesRadiusDot1xAcctAddr is set to ip address then cienaCesRadiusDot1xAcctResolvedInetAddress will contain same information as cienaCesRadiusDot1xAcctAddr. This OID should be used in conjuction with cienaCesRadiusDot1xAcctResolvedInetAddrType.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

cienaCesRadiusDot1xAcctAddr 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.4
Host name or IP address of the RADIUS server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

cienaCesRadiusDot1xAcctPriority 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.5
Specifies the priority of RADIUS servers configured on the device.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

cienaCesRadiusDot1xAcctAuthPort 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.6
The destination UDP port number to which RADIUS messages should be sent. The RADIUS server is not used for authentication if this port number is 0.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesRadiusDot1xAcctClearStatistics 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.7
This object clears the statistics for a server.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cienaCesRadiusDot1xAcctGreylistTimeRemaining 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.8
Reflects the remaining time before the server removed from the greylist. A value of '0' (zero) indicates the current server is not greylisted
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..14400  

cienaCesRadiusDot1xAcctRoundTripTime 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.9
The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

cienaCesRadiusDot1xAcctRequests 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.10
The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAcctRetransmissions 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.11
The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAcctAccessAccepts 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.12
The number of RADIUS Access-Accept packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAcctAccessRejects 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.13
The number of RADIUS Access-Reject packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAcctAccessChallenges 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.14
The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAcctAccountingResponses 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.15
The number of RADIUS Accounting-Response packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAcctMalformedResponses 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.16
The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAcctBadAuthenticators 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.17
The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAcctTimeouts 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.18
The number of authentication timeouts to this server. After a timeout the client may retry sending to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a request as well as a timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAcctUnknownTypes 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.19
The number of RADIUS packets of unknown type which were received from this server on the authentication port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAcctPacketsDropped 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.20
The number of RADIUS packets which were received from this server on the authentication port and dropped for some other reason.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesRadiusDot1xAcctStatus 1.3.6.1.4.1.1271.2.3.3.1.1.5.2.1.21
To create a row in this table, a manager must specify cienaCesRadiusDot1xAcctAddr and set this object to createAndGo(4). The RADIUS server will initially be administratively disabled. To administratively enable the RADIUS server, set this object to active(1). To administratively disable the RADIUS server set this object to notInService(2).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus