CIENA-CES-MODULE-MIB

File: CIENA-CES-MODULE-MIB.mib (76486 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
CIENA-GLOBAL-MIB CIENA-TC CIENA-SMI

Imported symbols

Integer32 TimeTicks Unsigned32
NOTIFICATION-TYPE OBJECT-TYPE MODULE-IDENTITY
DisplayString MacAddress TEXTUAL-CONVENTION
OBJECT-GROUP NOTIFICATION-GROUP cienaGlobalSeverity
cienaGlobalMacAddress CienaGlobalState cienaCesNotifications
cienaCesConfig

Defined Types

SwPkgStatus  
Last Xgrade command operational state.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), good(1), invalid(2), loading(3), syncing(4), waiting(5), burning(6), empty(7)  

SwModuleState  
Xgrade state.
TEXTUAL-CONVENTION    
  INTEGER installing(1), booting(2), initializing(3), good(4), failed(5), disabled(6), empty(7), unsupported(8), unknown(9)  

TceHealthCategory  
CES system health categories.
TEXTUAL-CONVENTION    
  INTEGER unknown(1), cpu(2), datapath(3), ethernet(4), fabric(5), sm(6), tempSm(7), samplesSm(8), disk(9), tempModule(10), samplesModule(11), fanTray(12), fanTraySpeedMismatch(13), fanSpeedMismatch(14), tempFan(15), samplesFan(16), fanRpm(17), power(18), feedPower(19), systemResource(20), memory(21), mac(22), i2c(23), flash(24), transceiver(25), link(26), iomStatus(27), usbFlash(28), linxstats(29), smFabric(30), spi(31), slotResource(32), tempIom(33), powerParams(34), powerOutputVoltage(35)  

TceHealthStatus  
CES system health status code.
TEXTUAL-CONVENTION    
  INTEGER unknown(1), normal(2), warning(3), degraded(4), faulted(5)  

HealthOriginType  
Origin of the resource.
TEXTUAL-CONVENTION    
  INTEGER none(0), chassis(1), slot(2), port(3), unit(4)  

CienaCesModuleEntry  
SEQUENCE    
  cienaCesModuleChassisIndx Unsigned32
  cienaCesModuleShelfIndx Unsigned32
  cienaCesModuleSlotIndx Unsigned32
  cienaCesModuleModel DisplayString
  cienaCesModuleType INTEGER
  cienaCesModuleDescription DisplayString
  cienaCesModuleAdminState INTEGER
  cienaCesModuleOperState INTEGER
  cienaCesModuleProtectionRole INTEGER
  cienaCesModuleStandbyStatus INTEGER
  cienaCesModuleLastRebootReason INTEGER
  cienaCesModuleAdminPostState INTEGER
  cienaCesModuleOperPostState INTEGER
  cienaCesModuleTrapState CienaGlobalState
  cienaCesModuleChassisNotifIndx Unsigned32
  cienaCesModuleShelfNotifIndx Unsigned32
  cienaCesModuleSlotNotifIndx Unsigned32
  cienaCesModuleSlotName DisplayString

CienaCesModuleDescriptionEntry  
SEQUENCE    
  cienaCesModuleDescriptionBoardName DisplayString
  cienaCesModuleDescriptionBoardPartNum DisplayString
  cienaCesModuleDescriptionBoardSerialNum DisplayString
  cienaCesModuleDescriptionBoardDesc DisplayString
  cienaCesModuleDescriptionHwVersion DisplayString
  cienaCesModuleDescriptionMfgDate DisplayString
  cienaCesModuleDescriptionBaseMac MacAddress
  cienaCesModuleDescriptionUpTime TimeTicks
  cienaCesModuleDescriptionTotalNumPorts Integer32

CienaCesModuleIDPEntry  
SEQUENCE    
  cienaCesModuleIDPEthBaseMac MacAddress
  cienaCesModuleIDPEthBaseMacRange Integer32
  cienaCesModuleIDPModuleSerialNumber DisplayString
  cienaCesModuleIDPModelPartNumber DisplayString
  cienaCesModuleIDPModelRevision DisplayString
  cienaCesModuleIDPProductID DisplayString
  cienaCesModuleIDPMfgDate DisplayString
  cienaCesModuleIDPCleiCode DisplayString
  cienaCesModuleIDPBarcode DisplayString
  cienaCesModuleIDPSWCompat Integer32
  cienaCesModuleIDPFTC Integer32

CienaCesModuleTempSensorEntry  
SEQUENCE    
  cienaCesModuleSensorIndx Integer32
  cienaCesModuleSensorDescription DisplayString
  cienaCesModuleSensorCurrentTemp Integer32
  cienaCesModuleSensorHighTemp Integer32
  cienaCesModuleSensorLowTemp Integer32
  cienaCesModuleSensorHighTempThreshold Integer32
  cienaCesModuleSensorLowTempThreshold Integer32
  cienaCesModuleSensorNotifIndx Integer32

CienaCesModuleSwEntry  
SEQUENCE    
  cienaCesModuleSwState SwModuleState
  cienaCesModuleSwRunningRelease DisplayString
  cienaCesModuleSwRunningReleasePartition Unsigned32
  cienaCesModuleSwReleasePartition0Pkg DisplayString
  cienaCesModuleSwReleasePartition0PkgStatus SwPkgStatus
  cienaCesModuleSwReleasePartition1Pkg DisplayString
  cienaCesModuleSwReleasePartition1PkgStatus SwPkgStatus
  cienaCesModuleSwReleasePartition2Pkg DisplayString
  cienaCesModuleSwReleasePartition2PkgStatus SwPkgStatus
  cienaCesModuleSwBank0KernelVersion DisplayString
  cienaCesModuleSwBank0KernelStatus SwPkgStatus
  cienaCesModuleSwBank1KernelVersion DisplayString
  cienaCesModuleSwBank1KernelStatus SwPkgStatus
  cienaCesModuleSwBank0UbootVersion DisplayString
  cienaCesModuleSwBank0UbootStatus SwPkgStatus
  cienaCesModuleSwBank1UbootVersion DisplayString
  cienaCesModuleSwBank1UbootStatus SwPkgStatus
  cienaCesModuleSwUbootGoldVersion DisplayString
  cienaCesModuleSwUbootGoldStatus SwPkgStatus
  cienaCesModuleSwMIBVer DisplayString

CienaCesModulePOSTErrorEntry  
SEQUENCE    
  cienaCesModulePOSTErrorIndex INTEGER
  cienaCesModulePOSTErrorDescription OCTET STRING
  cienaCesModulePOSTErrorSeverity INTEGER
  cienaCesModulePOSTErrorScope INTEGER
  cienaCesModulePOSTScopeIndex INTEGER

CienaCesModuleNotifEntry  
SEQUENCE    
  cienaCesModuleHealthCategory TceHealthCategory
  cienaCesModuleHealthSubCategory Unsigned32
  cienaCesModuleHealthStatus TceHealthStatus
  cienaCesModuleHealthStatusLast TceHealthStatus
  cienaCesModuleHealthOriginType HealthOriginType
  cienaCesModuleHealthOriginName DisplayString
  cienaCesModuleHealthOriginUnitId Unsigned32

CienaCesModuleResourceHealthEntry  
SEQUENCE    
  cienaCesModuleResourceHealthSubCategory INTEGER
  cienaCesModuleResourceDeviceIndx Unsigned32
  cienaCesModuleResourceHealthState TceHealthStatus
  cienaCesModuleResourceHealthCurrMeasurement Unsigned32
  cienaCesModuleResourceHealthMaxMeasurement Unsigned32
  cienaCesModuleResourceHealthMaxThreshold Unsigned32

Defined Values

cienaCesModuleMIB 1.3.6.1.4.1.1271.2.1.2
This module defines the module configuration objects and also the objects required for module related notifications.
MODULE-IDENTITY    

cienaCesModuleMIBObjects 1.3.6.1.4.1.1271.2.1.2.1
OBJECT IDENTIFIER    

cienaCesModuleNotifAttrs 1.3.6.1.4.1.1271.2.1.2.1.3
OBJECT IDENTIFIER    

cienaCesModuleGlobal 1.3.6.1.4.1.1271.2.1.2.1.1
OBJECT IDENTIFIER    

cienaCesModule 1.3.6.1.4.1.1271.2.1.2.1.2
OBJECT IDENTIFIER    

cienaCesSwModule 1.3.6.1.4.1.1271.2.1.2.1.2.4
OBJECT IDENTIFIER    

cienaCesModuleMIBNotificationPrefix 1.3.6.1.4.1.1271.2.2.3
OBJECT IDENTIFIER    

cienaCesModuleMIBNotifications 1.3.6.1.4.1.1271.2.2.3.0
OBJECT IDENTIFIER    

cienaCesModuleConformance 1.3.6.1.4.1.1271.2.1.2.2
OBJECT IDENTIFIER    

cienaCesModuleMIBCompliances 1.3.6.1.4.1.1271.2.1.2.2.1
OBJECT IDENTIFIER    

cienaCesModuleMIBGroups 1.3.6.1.4.1.1271.2.1.2.2.2
OBJECT IDENTIFIER    

cienaCesModuleGlobalPostState 1.3.6.1.4.1.1271.2.1.2.1.1.1
This object indicates the global POST state for the system.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesModuleTable 1.3.6.1.4.1.1271.2.1.2.1.2.1
The (conceptual) table listing the modules configured and detected.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesModuleEntry

cienaCesModuleEntry 1.3.6.1.4.1.1271.2.1.2.1.2.1.1
An entry (conceptual row) in the cienaCesModuleTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesModuleEntry  

cienaCesModuleChassisIndx 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.1
This object indicates the chassis index for the module.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..1  

cienaCesModuleShelfIndx 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.2
This object indicates the shelf index for the module.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..992  

cienaCesModuleSlotIndx 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.3
This object indicates the slot index for the module.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..38  

cienaCesModuleModel 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.4
This object indicates the module model.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleType 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.5
This object indicates whether this is a single module, control timing module, I/O module or fabric module.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(0), unknown(1), ctm(2), lm(3), sm(4)  

cienaCesModuleDescription 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.6
This object indicates the description of the module.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleAdminState 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.7
This object indicates the administrative state of the module.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), shutdown(3)  

cienaCesModuleOperState 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.8
This object indicates the operational state of the module.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER uninstalled(1), unequipped(2), init(3), disabled(4), enabled(5), faulted(6), hotswap(7), poweroff(8), hitlessInit(9), fastReload(10), krnInit(11), unsupported(12), installing(13), failed(14), krnDisable(15), appFault(16), booting(17), powerdown(18)  

cienaCesModuleProtectionRole 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.9
This object indicates the redundant administrative state of the module.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), primary(2), secondary(3)  

cienaCesModuleStandbyStatus 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.10
This object indicates the standby status of the module.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), cold(1), warm(2), hot(3), protected(4)  

cienaCesModuleLastRebootReason 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.11
This object indicates the last reboot reason of the module.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), snmp(2), pwrFail(3), appLoad(4), errorHandler(5), watchdog(6), upgrade(7), cli(8), resetButton(9), failOver(10), faultManager(11), communicationFailure(12), configurationRevert(13), unprotectedFailure(14), bootFailure(15), softwareRevert(16), processorWarmRestart(17), coldRestart(18), primaryRestart(19)  

cienaCesModuleAdminPostState 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.12
This object sets the POST administrative state for the given module.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesModuleOperPostState 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.13
This object indicates the POST operational state for the given module.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesModuleTrapState 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.16
This object indicates whether the device generates notifications for this module.
Status: current Access: read-write
OBJECT-TYPE    
  CienaGlobalState  

cienaCesModuleChassisNotifIndx 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.17
This object indicates the chassis index for the module used in trap definition.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..1  

cienaCesModuleShelfNotifIndx 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.18
This object indicates the shelf index for the module used in trap definition.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 0..992  

cienaCesModuleSlotNotifIndx 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.19
This object indicates the slot index for the module used in trap definition.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..38  

cienaCesModuleSlotName 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.20
This object indicates the slot name that the module is installed in.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleDescriptionTable 1.3.6.1.4.1.1271.2.1.2.1.2.2
The (conceptual) table listing the description of physical attributes of the modules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesModuleDescriptionEntry

cienaCesModuleDescriptionEntry 1.3.6.1.4.1.1271.2.1.2.1.2.2.1
An entry (conceptual row) in the cienaCesModuleDescriptionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesModuleDescriptionEntry  

cienaCesModuleDescriptionBoardName 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.1
This object indicates the module name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleDescriptionBoardPartNum 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.2
This object indicates the board part number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleDescriptionBoardSerialNum 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.3
This object indicates the board serial number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleDescriptionBoardDesc 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.4
This object indicates the board description.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleDescriptionHwVersion 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.5
This object indicates the module hardware version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleDescriptionMfgDate 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.6
This object indicates the module manufacturing date.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleDescriptionBaseMac 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.7
This object indicates the module base MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

cienaCesModuleDescriptionUpTime 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.8
This object indicates the module up time (in hundredths of a second) since the module was last re-initialized.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

cienaCesModuleDescriptionTotalNumPorts 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.9
This object indicates the number of ports on this module.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesModuleIDPTable 1.3.6.1.4.1.1271.2.1.2.1.2.8
The (conceptual) table listing the description of ID Prom contents of the modules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesModuleIDPEntry

cienaCesModuleIDPEntry 1.3.6.1.4.1.1271.2.1.2.1.2.8.1
An entry (conceptual row) in the cienaCesModuleIDPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesModuleIDPEntry  

cienaCesModuleIDPEthBaseMac 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.1
This object indicates the module Ethernet Base MAC address stored in the module IDP.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

cienaCesModuleIDPEthBaseMacRange 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.2
This object indicates the Ethernet MAC address range stored in the module IDP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesModuleIDPModuleSerialNumber 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.3
This object indicates the Module Serial Number stored in the module IDP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleIDPModelPartNumber 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.4
This object indicates the Model Part Number stored in the module IDP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleIDPModelRevision 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.5
This object indicates the Model Revision stored in the module IDP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleIDPProductID 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.6
This object indicates the Module Product ID stored in the module IDP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleIDPMfgDate 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.7
This object indicates the Manufactured Date stored in the module IDP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleIDPCleiCode 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.8
This object indicates the CLEI Code stored in the module IDP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleIDPBarcode 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.9
This object indicates the Barcode stored in the module IDP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleIDPSWCompat 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.10
This object indicates the Software Compatibility Number stored in the module IDP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesModuleIDPFTC 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.11
This object indicates the Functional Test Count stored in the module IDP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesModuleTempSensorTable 1.3.6.1.4.1.1271.2.1.2.1.2.3
The (conceptual) table listing the temperature sensors of the modules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesModuleTempSensorEntry

cienaCesModuleTempSensorEntry 1.3.6.1.4.1.1271.2.1.2.1.2.3.1
An entry (conceptual row) in the cienaCesModuleTempSensorTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesModuleTempSensorEntry  

cienaCesModuleSensorIndx 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.1
This object indicates the unique index in the table along with cienaCesModuleIndx.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesModuleSensorDescription 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.2
This object indicates the sensor description.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesModuleSensorCurrentTemp 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.3
This object indicates the current temperature of the module.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesModuleSensorHighTemp 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.4
This object indicates the highest temperature this module has reached since the last reboot.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesModuleSensorLowTemp 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.5
This object indicates the lowest temperature this module has reached since the last reboot
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesModuleSensorHighTempThreshold 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.6
This object indicates the high threshold for this module temperature.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..60  

cienaCesModuleSensorLowTempThreshold 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.7
This object indicates the low threshold for this module temperature.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..60  

cienaCesModuleSensorNotifIndx 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.8
This object indicates the unique index in the table used for trap definition.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesGlobalSwState 1.3.6.1.4.1.1271.2.1.2.1.2.4.1
The global software state of the system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), downloading(2), installing(3), activating(4), validating(5), reverting(6), running(7)  

cienaCesModuleSwTable 1.3.6.1.4.1.1271.2.1.2.1.2.4.2
The (conceptual) table listing the software package attributes on the modules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesModuleSwEntry

cienaCesModuleSwEntry 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1
An entry (conceptual row) in the cienaCesModuleSwTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesModuleSwEntry  

cienaCesModuleSwState 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.1
The software state on the module.
Status: current Access: read-only
OBJECT-TYPE    
  SwModuleState  

cienaCesModuleSwRunningRelease 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.2
Software package version that is currently running on the module.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

cienaCesModuleSwRunningReleasePartition 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.3
Release partition where the current running release is installed.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesModuleSwReleasePartition0Pkg 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.4
Release partition 0 software package version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

cienaCesModuleSwReleasePartition0PkgStatus 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.5
Release partition 0 software package status.
Status: current Access: read-only
OBJECT-TYPE    
  SwPkgStatus  

cienaCesModuleSwReleasePartition1Pkg 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.6
Release partition 1 software package version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

cienaCesModuleSwReleasePartition1PkgStatus 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.7
Release partition 1 software package status.
Status: current Access: read-only
OBJECT-TYPE    
  SwPkgStatus  

cienaCesModuleSwReleasePartition2Pkg 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.8
Release partition 2 software package version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

cienaCesModuleSwReleasePartition2PkgStatus 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.9
Release partition 2 software package status.
Status: current Access: read-only
OBJECT-TYPE    
  SwPkgStatus  

cienaCesModuleSwBank0KernelVersion 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.10
Bank0 kernel version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

cienaCesModuleSwBank0KernelStatus 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.11
Bank0 kernel software status.
Status: current Access: read-only
OBJECT-TYPE    
  SwPkgStatus  

cienaCesModuleSwBank1KernelVersion 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.12
Bank1 kernel version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

cienaCesModuleSwBank1KernelStatus 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.13
Bank1 kernel status.
Status: current Access: read-only
OBJECT-TYPE    
  SwPkgStatus  

cienaCesModuleSwBank0UbootVersion 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.14
Bank0 U-boot version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

cienaCesModuleSwBank0UbootStatus 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.15
Bank0 U-boot status.
Status: current Access: read-only
OBJECT-TYPE    
  SwPkgStatus  

cienaCesModuleSwBank1UbootVersion 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.16
Bank1 U-boot version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

cienaCesModuleSwBank1UbootStatus 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.17
Bank0 U-boot status.
Status: current Access: read-only
OBJECT-TYPE    
  SwPkgStatus  

cienaCesModuleSwUbootGoldVersion 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.18
U-boot Gold version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

cienaCesModuleSwUbootGoldStatus 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.19
U-boot Gold status.
Status: current Access: read-only
OBJECT-TYPE    
  SwPkgStatus  

cienaCesModuleSwMIBVer 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.20
This MIB object shows the MIB version currently supported.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

cienaCesModulePOSTErrorTable 1.3.6.1.4.1.1271.2.1.2.1.2.5
The (conceptual) table for viewing POST error on the modules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesModulePOSTErrorEntry

cienaCesModulePOSTErrorEntry 1.3.6.1.4.1.1271.2.1.2.1.2.5.1
An entry (conceptual row) in the cienaCesModulePOSTErrorResultsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesModulePOSTErrorEntry  

cienaCesModulePOSTErrorIndex 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.1
Index of the POST error for the module.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

cienaCesModulePOSTErrorDescription 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.2
A description of the module POST error.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cienaCesModulePOSTErrorSeverity 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.3
Severity of the POST error for the module.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), fatal(1), severe(2), warning(3)  

cienaCesModulePOSTErrorScope 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.4
Scope of the POST error for the module.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), chassis(1), blade(2), port(3)  

cienaCesModulePOSTScopeIndex 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.5
When scope is a port this object identifies the port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

cienaCesModuleSystemProtectionMode 1.3.6.1.4.1.1271.2.1.2.1.3.1
This object indicates the protection mode of the system.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER unprotected(1), cold(2), warm(3), hot(4)  

cienaCesModuleSwitchOverReason 1.3.6.1.4.1.1271.2.1.2.1.3.2
This object indicates the reason the SwitchOver happened. The following combinations determine the value of this object: CTM failure - Deprov mode - Cold FailOver User Initiated - Deprov Mode - Cold SwitchOver CTM failure - Audit mode - Hot FailOver User initiated - Audit mode - Hot SwitchOver.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER coldFailOver(1), coldSwitchOver(2), hotSwitchOver(3), hotFailOver(4)  

cienaCesModuleNotifTable 1.3.6.1.4.1.1271.2.1.2.1.3.3
The (conceptual) table to define the notification variable bindings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesModuleNotifEntry

cienaCesModuleNotifEntry 1.3.6.1.4.1.1271.2.1.2.1.3.3.1
An entry (conceptual row) in the cienaCesModuleNotifEntryTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesModuleNotifEntry  

cienaCesModuleHealthCategory 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.1
This object indicates the health category that the Health Manager monitors on the module.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TceHealthCategory  

cienaCesModuleHealthSubCategory 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.2
This object indicates the health sub category that the Health Manager monitors on the module.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

cienaCesModuleHealthStatus 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.3
This object indicates the current health status of health category and its sub category being monitored on the module.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TceHealthStatus  

cienaCesModuleHealthStatusLast 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.4
This object indicates the last known health status of health category and its sub category being monitored on the module.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TceHealthStatus  

cienaCesModuleHealthOriginType 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.5
This object indicates the origin of the health status notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  HealthOriginType  

cienaCesModuleHealthOriginName 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.6
This object indicates the origin name of the health status notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString Size(0..10)  

cienaCesModuleHealthOriginUnitId 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.7
This object indicates the origin id of the health notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

cienaCesModuleResourceHealthTable 1.3.6.1.4.1.1271.2.1.2.1.2.6
Table listing the health information of dataplane resources.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesModuleResourceHealthEntry

cienaCesModuleResourceHealthEntry 1.3.6.1.4.1.1271.2.1.2.1.2.6.1
An entry in the cienaCesModuleResourceHealthTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesModuleResourceHealthEntry  

cienaCesModuleResourceHealthSubCategory 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.1
The sub-category of the dataplane resource being monitored. - 'none' is an enumeration placeholder.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER none(0), subPort(1), qosFlow(2), accessFlow(3), queueGroupInstance(4), schedulerInstance(5), pbtTransit(6), pltfmTokenBucket(7), pltfmEgressTunnel(8), pltfmVirtTcamEntries(9), pltfmAclTcamEntries(10), pltfmVOQ(11), pltfmCLScheduler(12), pltfmFQScheduler(13), pltfmEgressShapingCIR(14), pltfmBscp(15), pltfmHighRateTokenBucket(16), pltfmLowRateTokenBucket(17), pltfmParentMeter(18), pltfmChildMeter(19), pltfmL2UserTypes(20), logicalInterfaces(21), pltfmLmPowerBudget(22), pltfmPpIngressL2Xform(23), pltfmPpEgressL2Xform(24), pltfmPpInternalTcam(25), pltfmNpMaintPoint(26), pltfmNpMaintPointSession(27), pltfmNpFastTimer300Hz(28), pltfmNpFastTimer10msec(29), pltfmNpFastTimer100msec(30), pltfmNpFastTimer1sec(31), pltfmNpSlowTimer(32), pltfmNpWatchdogTimer(33), pltfmNpProtectionGroup(34)  

cienaCesModuleResourceDeviceIndx 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.2
Index of the device being monitored.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesModuleResourceHealthState 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.3
Health state of the dataplane resource being monitored.
Status: current Access: read-only
OBJECT-TYPE    
  TceHealthStatus  

cienaCesModuleResourceHealthCurrMeasurement 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.4
Current value of the dataplane resource being monitored.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesModuleResourceHealthMaxMeasurement 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.5
The maximum recorded value of the dataplane resource being monitored.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesModuleResourceHealthMaxThreshold 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.6
The maximum possible value for the dataplane resource being monitored.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesModuleStateChangeNotification 1.3.6.1.4.1.1271.2.2.3.0.1
A cienaCesModuleStateChange notification is sent when the operational state of the module is changed. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleHealthStatusUnknownNotification 1.3.6.1.4.1.1271.2.2.3.0.2
This notification is sent whenever the Health Manager detects a status change to unknown. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleHealthStatusWarningNotification 1.3.6.1.4.1.1271.2.2.3.0.3
This notification is sent whenever the Health Manager detects a status change to warning. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleHealthStatusFaultedNotification 1.3.6.1.4.1.1271.2.2.3.0.4
This notification is sent whenever the Health Manager detects a status change to faulted. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleHealthStatusDegradedNotification 1.3.6.1.4.1.1271.2.2.3.0.5
This notification is sent whenever the Health Manager detects a status change to degraded. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleHealthStatusGoodNotification 1.3.6.1.4.1.1271.2.2.3.0.6
This notification is sent whenever the Health Manager detects a status change to normal. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleSensorHighTempNotification 1.3.6.1.4.1.1271.2.2.3.0.7
This notification is sent when the cienaCesModuleSensor temperature exceeds the high temperature threshold for the module. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, and cienaCesModuleSensorHighTempThreshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleSensorNormalTempNotification 1.3.6.1.4.1.1271.2.2.3.0.9
This notification is sent if the cienaCesModule temperature changes from previously reported high or low temperature exceeding thresholds to normal temperature. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, cienaCesModuleSensorLowTemp, and cienaCesModuleSensorHighTemp.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleSensorLowTempNotification 1.3.6.1.4.1.1271.2.2.3.0.8
This notification is sent when the cienaCesModuleSensor falls below the low temperature threshold for the module. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, and cienaCesModuleSensorLowTempThreshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleHASwitchOverNotification 1.3.6.1.4.1.1271.2.2.3.0.10
This notification is sent for CTM switchover. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSwitchOverReason, cienaCesModuleAdminState, and cienaCesModuleOperState.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleProtectionModeColdNotification 1.3.6.1.4.1.1271.2.2.3.0.11
This notification is sent when the protection mode of the system changes to cold. A COLD protection level is the lowest level of protection. It implies that the secondary CTM is ready to assume the function of the primary CTM but a failure causing a failover would be service impacting. The secondary CTM has been synchronized with the same software package, configuration files, etc such that it will return the same state as the previous primary CTM. The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM has completed the synchronization. In the case of a failure on the primary CTM, the secondary CTM will immediately assume primary status, finish its initialization and reboot the PSLMs. The primary CTM will reapply the configuration to the PSLMs after they have booted. Any unsaved configuration changes will NOT be lost on a failover as configuration changes are propagated to the secondary CTM configuration. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleProtectionModeWarmNotification 1.3.6.1.4.1.1271.2.2.3.0.12
This notification is sent when the protection mode of the system changes to warm. This state is not supported on the 5410 platform. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleProtectionModeUnprotectedNotification 1.3.6.1.4.1.1271.2.2.3.0.13
This notification is sent when the protection mode of the system changes to unprotected. A protection level of unprotected implies that there is no secondary CTM present in the system or that the current secondary CTM is not in a state to provide any protection. In the case of the CTM failure, the primary CTM will reboot and subsequently reboot all the PSLMs, causing loss of existing switched traffic patterns. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleProtectionModeHotNotification 1.3.6.1.4.1.1271.2.2.3.0.14
This notification is sent when the protection mode of the system changes to hot. A HOT protection level is the highest level of protection. It implies that the secondary CTM is ready to assume the function of the primary CTM and a failure causing a failover would NOT be service impacting. The secondary CTM has been synchronized with the same software package, configuration files, etc such that it will return the same state as the previous primary CTM. The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM has completed the synchronization. In the case of a failure on the primary CTM, the secondary CTM will immediately assume primary status, finish its initialization and audit the PSLMs. All current established traffic patterns will be maintained with a minimal loss of traffic. Any unsaved configuration changes will NOT be lost on a failover as configuration changes are propagated to the secondary CTM configuration. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModulePostErrorNotification 1.3.6.1.4.1.1271.2.2.3.0.15
This notification is sent when a module POST error is detected. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModulePOSTErrorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, and cienaCesModulePOSTErrorDescription.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleFastReloadUnsuccessfulNotification 1.3.6.1.4.1.1271.2.2.3.0.16
This notification is sent when the deprov (cold switchover or failover) fails. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleHitlessModeUnsuccessfulNotification 1.3.6.1.4.1.1271.2.2.3.0.17
This notification is sent when the audit (hot failover or switchover) fails. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleSwitchFabricDisruptedUnrecoverableNotification 1.3.6.1.4.1.1271.2.2.3.0.18
This notification is sent when the switch fabric detects a game-over failure and the system cannot automatically correct without resetting certain fabric subsystems. This kind of a disruption can cause a major service interruption. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled - cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesModuleSwitchFabricDisruptedRecoverableNotification 1.3.6.1.4.1.1271.2.2.3.0.19
This notification is sent when the switch fabric detects game-over failure and the system can automatically correct it. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled - cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx.
Status: current Access: read-only
NOTIFICATION-TYPE    

moduleConfigGroup 1.3.6.1.4.1.1271.2.1.2.2.2.1
A collection of objects providing information about configuration table.
Status: current Access: read-only
OBJECT-GROUP    

moduleDescriptionGroup 1.3.6.1.4.1.1271.2.1.2.2.2.2
A collection of objects providing information about module capabilities.
Status: current Access: read-only
OBJECT-GROUP    

moduleSensorGroup 1.3.6.1.4.1.1271.2.1.2.2.2.3
A collection of objects providing information of module temperature sensors.
Status: current Access: read-only
OBJECT-GROUP    

moduleNotifGroup 1.3.6.1.4.1.1271.2.1.2.2.2.4
A collection of objects providing information about module notifications.
Status: current Access: read-only
NOTIFICATION-GROUP    

modulePostErrorGroup 1.3.6.1.4.1.1271.2.1.2.2.2.5
A collection of objects providing information of module POST errors.
Status: current Access: read-only
OBJECT-GROUP