CHIPAGENT-MIB

File: CHIPAGENT-MIB.mib (20853 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

enterprises NetworkAddress IpAddress
Counter Gauge TimeTicks
DisplayString OBJECT-TYPE

Defined Types

ChipTTYEntry  
SEQUENCE    
  chipTTYIndex INTEGER
  chipTTYBaud INTEGER
  chipTTYParity INTEGER
  chipTTYStop INTEGER
  chipTTYData INTEGER
  chipTTYTimeout INTEGER
  chipTTYPrompt DisplayString
  chipTTYDTR INTEGER
  chipTTYTerminalType DisplayString

Defined Values

chipcom 1.3.6.1.4.1.49
OBJECT IDENTIFIER    

chipmib02 1.3.6.1.4.1.49.2
OBJECT IDENTIFIER    

chipGen 1.3.6.1.4.1.49.2.1
OBJECT IDENTIFIER    

chipEcho 1.3.6.1.4.1.49.2.2
OBJECT IDENTIFIER    

chipProducts 1.3.6.1.4.1.49.2.3
OBJECT IDENTIFIER    

chipExperiment 1.3.6.1.4.1.49.2.4
OBJECT IDENTIFIER    

chipTTY 1.3.6.1.4.1.49.2.5
OBJECT IDENTIFIER    

chipTFTP 1.3.6.1.4.1.49.2.6
OBJECT IDENTIFIER    

chipDownload 1.3.6.1.4.1.49.2.7
OBJECT IDENTIFIER    

online 1.3.6.1.4.1.49.2.3.1
OBJECT IDENTIFIER    

oebm 1.3.6.1.4.1.49.2.3.2
OBJECT IDENTIFIER    

midnight 1.3.6.1.4.1.49.2.3.3
OBJECT IDENTIFIER    

workGroupHub 1.3.6.1.4.1.49.2.3.4
OBJECT IDENTIFIER    

emm 1.3.6.1.4.1.49.2.3.5
OBJECT IDENTIFIER    

chipBridge 1.3.6.1.4.1.49.2.3.6
OBJECT IDENTIFIER    

trmm 1.3.6.1.4.1.49.2.3.7
OBJECT IDENTIFIER    

fmm 1.3.6.1.4.1.49.2.3.8
OBJECT IDENTIFIER    

focus1 1.3.6.1.4.1.49.2.3.9
OBJECT IDENTIFIER    

oeim 1.3.6.1.4.1.49.2.3.10
OBJECT IDENTIFIER    

chipExpTokenRing 1.3.6.1.4.1.49.2.4.1
OBJECT IDENTIFIER    

dot1dBridge 1.3.6.1.4.1.49.2.4.14
OBJECT IDENTIFIER    

dot5 1.3.6.1.4.1.49.2.4.1.1
OBJECT IDENTIFIER    

olAgents 1.3.6.1.4.1.49.2.3.1.1
OBJECT IDENTIFIER    

olConc 1.3.6.1.4.1.49.2.3.1.2
OBJECT IDENTIFIER    

olEnv 1.3.6.1.4.1.49.2.3.1.3
OBJECT IDENTIFIER    

olModules 1.3.6.1.4.1.49.2.3.1.4
OBJECT IDENTIFIER    

olNets 1.3.6.1.4.1.49.2.3.1.5
OBJECT IDENTIFIER    

olGroups 1.3.6.1.4.1.49.2.3.1.6
OBJECT IDENTIFIER    

olAlarm 1.3.6.1.4.1.49.2.3.1.7
OBJECT IDENTIFIER    

olSpecMods 1.3.6.1.4.1.49.2.3.1.4.4
OBJECT IDENTIFIER    

ol50nnMCTL 1.3.6.1.4.1.49.2.3.1.4.4.3
OBJECT IDENTIFIER    

ol51nnMMGT 1.3.6.1.4.1.49.2.3.1.4.4.4
OBJECT IDENTIFIER    

ol51nnMFIB 1.3.6.1.4.1.49.2.3.1.4.4.5
OBJECT IDENTIFIER    

ol51nnMUTP 1.3.6.1.4.1.49.2.3.1.4.4.6
OBJECT IDENTIFIER    

ol51nnMTP 1.3.6.1.4.1.49.2.3.1.4.4.7
OBJECT IDENTIFIER    

ol51nnMBNC 1.3.6.1.4.1.49.2.3.1.4.4.8
OBJECT IDENTIFIER    

ol51nnBEE 1.3.6.1.4.1.49.2.3.1.4.4.9
OBJECT IDENTIFIER    

ol51nnRES 1.3.6.1.4.1.49.2.3.1.4.4.10
OBJECT IDENTIFIER    

ol51nnREE 1.3.6.1.4.1.49.2.3.1.4.4.11
OBJECT IDENTIFIER    

ol51nnMAUIF 1.3.6.1.4.1.49.2.3.1.4.4.12
OBJECT IDENTIFIER    

ol51nnMAUIM 1.3.6.1.4.1.49.2.3.1.4.4.13
OBJECT IDENTIFIER    

ol5208MTP 1.3.6.1.4.1.49.2.3.1.4.4.14
OBJECT IDENTIFIER    

ol51nnMFP 1.3.6.1.4.1.49.2.3.1.4.4.15
OBJECT IDENTIFIER    

ol51nnMFBP 1.3.6.1.4.1.49.2.3.1.4.4.16
OBJECT IDENTIFIER    

ol51nnMTPL 1.3.6.1.4.1.49.2.3.1.4.4.17
OBJECT IDENTIFIER    

ol51nnMTPPL 1.3.6.1.4.1.49.2.3.1.4.4.18
OBJECT IDENTIFIER    

ol52nnMTP 1.3.6.1.4.1.49.2.3.1.4.4.19
OBJECT IDENTIFIER    

ol52nnMFR 1.3.6.1.4.1.49.2.3.1.4.4.20
OBJECT IDENTIFIER    

ol51nnMTS 1.3.6.1.4.1.49.2.3.1.4.4.21
OBJECT IDENTIFIER    

ol51nnMFL 1.3.6.1.4.1.49.2.3.1.4.4.22
OBJECT IDENTIFIER    

ol50nnMRCTL 1.3.6.1.4.1.49.2.3.1.4.4.23
OBJECT IDENTIFIER    

ol51nnMFB 1.3.6.1.4.1.49.2.3.1.4.4.24
OBJECT IDENTIFIER    

ol53nnMMGT 1.3.6.1.4.1.49.2.3.1.4.4.25
OBJECT IDENTIFIER    

ol53nnMFBMIC 1.3.6.1.4.1.49.2.3.1.4.4.26
OBJECT IDENTIFIER    

ol53nnMFIBST 1.3.6.1.4.1.49.2.3.1.4.4.27
OBJECT IDENTIFIER    

ol53nnMSTP 1.3.6.1.4.1.49.2.3.1.4.4.28
OBJECT IDENTIFIER    

ol51nnMTPCL 1.3.6.1.4.1.49.2.3.1.4.4.29
OBJECT IDENTIFIER    

ol52nnBTT 1.3.6.1.4.1.49.2.3.1.4.4.30
OBJECT IDENTIFIER    

ol51nnIx 1.3.6.1.4.1.49.2.3.1.4.4.31
OBJECT IDENTIFIER    

ol52nnMMGT 1.3.6.1.4.1.49.2.3.1.4.4.32
OBJECT IDENTIFIER    

ol50nnMHCTL 1.3.6.1.4.1.49.2.3.1.4.4.33
OBJECT IDENTIFIER    

olNet 1.3.6.1.4.1.49.2.3.1.5.1
OBJECT IDENTIFIER    

olEnet 1.3.6.1.4.1.49.2.3.1.5.2
OBJECT IDENTIFIER    

olTRnet 1.3.6.1.4.1.49.2.3.1.5.3
OBJECT IDENTIFIER    

olFDDInet 1.3.6.1.4.1.49.2.3.1.5.4
OBJECT IDENTIFIER    

hubSysGroup 1.3.6.1.4.1.49.2.3.4.1
OBJECT IDENTIFIER    

hardwareGroup 1.3.6.1.4.1.49.2.3.4.2
OBJECT IDENTIFIER    

softwareGroup 1.3.6.1.4.1.49.2.3.4.3
OBJECT IDENTIFIER    

hubGroup 1.3.6.1.4.1.49.2.3.4.4
OBJECT IDENTIFIER    

boardGroup 1.3.6.1.4.1.49.2.3.4.5
OBJECT IDENTIFIER    

portGroup 1.3.6.1.4.1.49.2.3.4.6
OBJECT IDENTIFIER    

alarmGroup 1.3.6.1.4.1.49.2.3.4.7
OBJECT IDENTIFIER    

olThresh 1.3.6.1.4.1.49.2.3.1.7.1
OBJECT IDENTIFIER    

olThreshControl 1.3.6.1.4.1.49.2.3.1.7.1.1
OBJECT IDENTIFIER    

chipGenProduct 1.3.6.1.4.1.49.2.1.1
The product type represented by this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER product-5100M-MGT(1), product-5102B-EE(2), product-8383B(3), product-5112H-UTP(4), product-5300M-MGT(5), product-5200M-MGT(7)  

chipGenServiceDate 1.3.6.1.4.1.49.2.1.2
The date that the product was last serviced in the format yymmdd. If this date is unknown, the value of this object is '000000'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(6)  

chipGenNetman 1.3.6.1.4.1.49.2.1.3
The IP (source) Address of the last authenticated SNMP PDU received by this entity before this request. An IP Address of 00.00.00.00 represents the default value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

chipGenDiagnostics 1.3.6.1.4.1.49.2.1.4
The result of this product's diagnostic test(s). If any test fails, this will have the failed(2) value. Note, many products do not operate after a diagnostic failure. In this case, no SNMP communication would be available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER passed(1), failed(2)  

chipGenSerial 1.3.6.1.4.1.49.2.1.5
The serial number of this product.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..128)  

chipGenID 1.3.6.1.4.1.49.2.1.6
A unique ID used for grouping disparate agents together. For example, a concentrator may contain multiple agents. This ID is could be assigned by the management station to identify all of these agents as being contained in the same concentrator.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

chipGenVers 1.3.6.1.4.1.49.2.1.7
The version identifier(s) for this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

chipGenAuthFailureAddr 1.3.6.1.4.1.49.2.1.8
The source IP Address of the last SNMP request that caused an authentication failure trap to be generated. This object is also included in the SNMP authenticationFailure trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

chipGenTimeLastChanged 1.3.6.1.4.1.49.2.1.9
A snapshot of sysUpTime when the last trap was generated. This attribute can be used to save polling by a management station. If there have been no traps generated since the last poll, there is no need for the station to poll again.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

chipEchoStart 1.3.6.1.4.1.49.2.2.1
Setting chipEchoStart to startEcho(2) causes the device to begin an ICMP echo sequence using the parameters indicated by the rest of the chipEcho group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noEcho(1), startEcho(2)  

chipEchoAddr 1.3.6.1.4.1.49.2.2.2
The IP Address to which the device will ping. The default value is the loopback address 127.0.0.1 .
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

chipEchoPattern 1.3.6.1.4.1.49.2.2.3
The actual pattern to be contained in the ICMP echo packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER zeroes(1), ones(2), mixed(3)  

chipEchoNumber 1.3.6.1.4.1.49.2.2.4
The number of ICMP echo packets (pings) to send.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

chipEchoSize 1.3.6.1.4.1.49.2.2.5
The size of the ICMP echo packet (ping) to send when chipEchoStart is set. The valid range is between 64 and 1500 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 64..1500  

chipEchoResponseCounts 1.3.6.1.4.1.49.2.2.6
The count of ICMP echo response packets received since the last PING was initiated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

chipTTYNumber 1.3.6.1.4.1.49.2.5.1
The number of terminal ports on this agent product.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

chipTTYTable 1.3.6.1.4.1.49.2.5.2
A table of TTY specific information associated with this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ChipTTYEntry

chipTTYEntry 1.3.6.1.4.1.49.2.5.2.1
A profile of a specific TTY interface associated with this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ChipTTYEntry  

chipTTYIndex 1.3.6.1.4.1.49.2.5.2.1.1
The TTY to which this entry refers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

chipTTYBaud 1.3.6.1.4.1.49.2.5.2.1.2
The baud rate for this TTY. It should be noted that all serial ports do not support all of the above baud rates.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one-hundred-ten(110), three-hundred(300), twelve-hundred(1200), twenty-four-hundred(2400), forty-eight-hundred(4800), ninety-six-hundred(9600), nineteen-two-hundred(19200), thirty-eight-thousand-four-hundred(38400)  

chipTTYParity 1.3.6.1.4.1.49.2.5.2.1.3
The parity setting for this TTY.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER odd(1), even(2), none(3)  

chipTTYStop 1.3.6.1.4.1.49.2.5.2.1.4
The number of stop bits for this TTY.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2)  

chipTTYData 1.3.6.1.4.1.49.2.5.2.1.5
The number of data bits for this TTY.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER seven(7), eight(8)  

chipTTYTimeout 1.3.6.1.4.1.49.2.5.2.1.6
The number of minutes to wait before this agent logs out an inactive login session on this TTY. NOTE: In some implementations, this is a single variable that is used by all of the terminal and telnet sessions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

chipTTYPrompt 1.3.6.1.4.1.49.2.5.2.1.7
The terminal prompt to display on this TTY. NOTE: In some implementations, this is a single variable that is used by all of the terminal and telnet sessions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

chipTTYDTR 1.3.6.1.4.1.49.2.5.2.1.8
This value dictates the behavior of the RS-232 Data Terminal Ready (DTR) signal at the time a session ends due to a logout, timeout, or shutdown. This is used by some modems as an indication that they should hangup. This variable is only support if the RS-232 port has a DTR signal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER asserted(1), deasserted(2)  

chipTTYTerminalType 1.3.6.1.4.1.49.2.5.2.1.9
A string which indicates the type of terminal that is attached to the serial port. It should be noted that the string is passed to a telnet server whenever the server issues the IAC DO TERMINAL-TYPE command (see rfc884).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..40)  

chipTFTPStart 1.3.6.1.4.1.49.2.6.1
Setting chipTFTPStart to tftpGet(2) initiates a file transfer to the agent (download); tftpPut(3) initiates a file transfer to the server (upload).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tftpNoTransfer(1), tftpGet(2), tftpPut(3)  

chipTFTPSlot 1.3.6.1.4.1.49.2.6.2
The slot number of the module that is to be involved in the TFTP transfer with the TFTP server (chipTFTPIpAddress).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER slot-1(1), slot-2(2), slot-3(3), slot-4(4), slot-5(5), slot-6(6), slot-7(7), slot-8(8), slot-9(9), slot-10(10), slot-11(11), slot-12(12), slot-13(13), slot-14(14), slot-15(15), slot-16(16), slot-17(17), agent-slot(255)  

chipTFTPIpAddress 1.3.6.1.4.1.49.2.6.3
The IP Address of the TFTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

chipTFTPFileName 1.3.6.1.4.1.49.2.6.4
The file name of the file to retrieve (tftpGet), or the name of the file to create (tftpPut).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

chipTFTPFileType 1.3.6.1.4.1.49.2.6.5
The type of file image to upload/download. The file type indicates to the agent what kind of file it is receiving. flashCode(1) indicates a code upgrade of the operational proms. bootCode(2) indicates a code upgrade of the boot proms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER flashCode(1), bootCode(2)  

chipTFTPResult 1.3.6.1.4.1.49.2.6.6
The result of the last TFTP operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clear(1), xferInProgress(2), okay(3), otherTFTPError(4), fileNotFound(5), accessError(6), diskFull(7), illegalTFTPOperation(8), invalidTFTPTransactionID(9), noResponse(10), invalidDownloadKey(11), invalidSlot(12), invalidNetwork(13), fepromErase(14), fepromProg(15), xferError(16), decodeError(17)  

chipDownloadUDKSerial 1.3.6.1.4.1.49.2.7.1
A string representing the serial number of the Upgrade Distribution Kit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

chipDownloadKey 1.3.6.1.4.1.49.2.7.2
The key code provided by your VAR. Available by calling technical support at +1 508 460 6195.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

chipDownloadDateTime 1.3.6.1.4.1.49.2.7.3
The date of the last successful download in the format hh:mm day DD Mon YY
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)