CERAGON-MIB

File: CERAGON-MIB.mib (614717 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

Counter enterprises IpAddress
Gauge DisplayString ifIndex
OBJECT-TYPE TRAP-TYPE

Defined Types

GnGenCfgDeviceEntry  
SEQUENCE    
  gnGenCfgDeviceId INTEGER
  gnGenCfgDeviceResetPerfMon INTEGER
  gnGenCfgDeviceOperation INTEGER
  gnGenCfgActivateLoopback INTEGER
  gnGenCfgF1DataChanConnector INTEGER
  gnGenCfgWaySideConnector INTEGER
  gnGenCfgActivateChanLoopback INTEGER
  gnGenCfgInterLenLocalOnly INTEGER
  gnGenCfgSlipIp IpAddress
  gnGenCfgSlipModemConnection DisplayString
  gnGenCfgSlipSpeed INTEGER
  gnGenCfgAlarmSeverity OCTET STRING
  gnGenCfgODUSerialNumber DisplayString
  gnGenCfgIDUSerialNumber DisplayString
  gnGenCfgAlarmText DisplayString
  gnGenCfgTrapSeverity INTEGER
  gnGenCfgProductType INTEGER
  gnGenCfgLeftMediumConnector INTEGER
  gnGenCfgMiddleMediumConnector INTEGER
  gnGenCfgPrimaryClockSource INTEGER
  gnGenCfgSecondaryClockSource INTEGER
  gnGenCfgTrapOption INTEGER
  gnGenCfgCLLI DisplayString
  gnGenCfgHeartbeatPeriod INTEGER
  gnGenCfgGetRemoteData INTEGER
  gnGenCfgClearLoopTimeout INTEGER
  gnGenCfgSubProductType INTEGER

GnGenStatDeviceEntry  
SEQUENCE    
  gnGenStatDeviceId INTEGER
  gnGenStatDeviceCelsiusTemp INTEGER
  gnGenStatDeviceFahrenheitTemp INTEGER
  gnGenStatDevicePowerSupply OCTET STRING
  gnGenStatDeviceCable INTEGER
  gnGenStatDeviceDryContact OCTET STRING
  gnGenStatDeviceLeds OCTET STRING
  gnGenStatInternalCommunication OCTET STRING
  gnGenStatDeviceFanStatus OCTET STRING
  gnGenStatDeviceODUStatus OCTET STRING
  gnGenStatDeviceIDUStatus OCTET STRING
  gnGenStatDeviceRSTStatus OCTET STRING

GnGenIdcCfgEntry  
SEQUENCE    
  gnGenIdcCfgId INTEGER
  gnGenIdcCfgXpicMode INTEGER
  gnGenIdcCfgResetPerfMon INTEGER
  gnGenIdcCfgOperation INTEGER
  gnGenIdcCfgWaySideConnector INTEGER
  gnGenIdcCfgHeartbeatPeriod INTEGER
  gnGenIdcCfgClearLoopTimeout INTEGER
  gnGenIdcCfgSlipIp IpAddress
  gnGenIdcCfgSlipModemConnection DisplayString
  gnGenIdcCfgSlipSpeed INTEGER
  gnGenIdcCfgAlarmSeverity OCTET STRING
  gnGenIdcCfgIDUSerialNumber DisplayString
  gnGenIdcCfgTrapOption INTEGER
  gnGenIdcCfgCLLI DisplayString
  gnGenIdcCfgEowCascadeStatus INTEGER
  gnGenIdcCfgSerialPPPAdminStatus INTEGER

GnGenIdcStatEntry  
SEQUENCE    
  gnGenIdcStatId INTEGER
  gnGenIdcStatXpicSupport INTEGER
  gnGenIdcStatLeds OCTET STRING
  gnGenIdcStatIDUStatus OCTET STRING
  gnGenIdcStatMMCCardStatus OCTET STRING
  gnGenIdcStatDryContact OCTET STRING
  gnGenIdcStatFanStatus OCTET STRING
  gnGenIdcStatLeftDrawerStatus INTEGER
  gnGenIdcStatRightDrawerStatus INTEGER
  gnGenIdcStatHitlessSupport INTEGER
  gnGenIdcStatEowExistence INTEGER
  gnGenIdcStatEowSupport INTEGER
  gnGenIdcStatIduPosition INTEGER
  gnGenIdcStatBoardType INTEGER
  gnGenIdcStatAgentIPAddress IpAddress
  gnGenIdcStatInterfaceConnector INTEGER
  gnGenIdcStatIfTableCounter INTEGER

GnGeneralXEntry  
SEQUENCE    
  gnGenXId INTEGER
  gnGenXStandardOrg INTEGER
  gnGenXRemoteConnection INTEGER
  gnGenXLinkId INTEGER
  gnGenXModemType INTEGER
  gnGenXRadioSide INTEGER
  gnGenXSystemWorkTime INTEGER
  gnGenXOperation INTEGER
  gnGenXResetPerfMon INTEGER
  gnGenXAlarmSeverity OCTET STRING
  gnGenXCarrierSerialNumber DisplayString
  gnGenXMUXSerialNumber DisplayString
  gnGenXProductType INTEGER
  gnGenXCarrierConnector INTEGER
  gnGenXInterfacesLeds OCTET STRING
  gnGenXMultiRateMultiConsConf INTEGER
  gnGenXMultiRateMultiConsSupport OCTET STRING
  gnGenXWaysideChannel INTEGER
  gnGenXWaySideLoopback INTEGER
  gnGenXSyncIdcDataBase INTEGER
  gnGenXAesEnable INTEGER
  gnGenXAesMkeyMode INTEGER
  gnGenXActNumOfInterfaceOnClass1 INTEGER
  gnGenXActNumOfInterfaceOnClass2 INTEGER
  gnGenXActNumOfInterfaceOnClass3 INTEGER
  gnGenXEowStatus INTEGER
  gnGenXTempLicenseEnable INTEGER
  gnGenXTempLicenseTimer INTEGER
  gnGenXDefectBlocks INTEGER
  gnGenXBytesCorrected INTEGER
  gnGenXPrbsTest INTEGER
  gnGenXClearCounters INTEGER
  gnGenXMuxLicense OCTET STRING

GnGeneralMrmcXEntry  
SEQUENCE    
  gnGenMrmcXId INTEGER
  gnGenMrmcXMrmcVal INTEGER
  gnGenMrmcXBitRate INTEGER
  gnGenMrmcXBandWidth INTEGER
  gnGenMrmcXQam INTEGER
  gnGenMrmcXScriptType INTEGER

GnGenDrawerXEntry  
SEQUENCE    
  gnGenDrawerXId INTEGER
  gnGenDrawerXName DisplayString Size(0..20)
  gnGenDrawerXSlot1Status INTEGER
  gnGenDrawerXSlot2Status INTEGER
  gnGenDrawerXDeviceLeds OCTET STRING
  gnGenDrawerXInternalCommunication OCTET STRING
  gnGenDrawerXDeviceIDUStatus OCTET STRING

AddressesEntry  
SEQUENCE    
  addressesPeerIPId INTEGER
  addressesPeerIPAddress IpAddress

BackplaneSlotMappingEntry  
SEQUENCE    
  backplaneSlotMappingSubrackId INTEGER 1..3
  backplaneSlotMappingFloorId INTEGER 1..100
  backplaneSlotMappingDrawerId INTEGER 1..3
  backplaneSlotMappingSubDrawerId INTEGER 1..2
  backplaneSlotMappingUnitType INTEGER
  backplaneSlotMappingUnitNumber INTEGER 1..15
  backplaneSlotMappingUnitIndex INTEGER

PowerInputEntry  
SEQUENCE    
  powerInputId INTEGER 1..6
  powerInputAdmin INTEGER
  powerInputStatus INTEGER
  powerInputLedStatus OCTET STRING Size(1)

XCDrawerEntry  
SEQUENCE    
  xcDrawerXCId INTEGER 1..6
  xcDrawerLedsStatus OCTET STRING Size(1)
  xcDrawerBoardHWVersion INTEGER
  xcDrawerBoardFWVersion DisplayString Size(0..20)
  xcDrawerBoardPostResetFWVersion DisplayString Size(0..20)
  xcDrawerSerialNumber DisplayString Size(0..20)
  xcDrawerResetXCBoard INTEGER
  xcDrawerXCSelfTestResult INTEGER
  xcDrawerXCActivityRole INTEGER
  xcDrawerSyncIdcDataBase INTEGER
  xcDrawerXCConnector INTEGER

GnGenCarrierXEntry  
SEQUENCE    
  gnGenCarrierXId INTEGER
  gnGenCarrierXResetPerfMon INTEGER
  gnGenCarrierXSyncIdcDataBase INTEGER

GnAgnMgrEntry  
SEQUENCE    
  gnAgnMgrId INTEGER
  gnAgnMgrIP IpAddress
  gnAgnMgrAlarmGroupMask OCTET STRING
  gnAgnMgrSeverityFilter OCTET STRING
  gnAgnMgrTrapPort INTEGER

GnAgnLogFileEntry  
SEQUENCE    
  gnAgnLogFileId INTEGER
  gnAgnLogFileValid INTEGER
  gnAgnLogFileDate DisplayString
  gnAgnLogFileTime DisplayString
  gnAgnLogFileSeverity INTEGER
  gnAgnLogFileText DisplayString
  gnAgnLogFileDeviceCelsiusTemp INTEGER
  gnAgnLogFileDevicePowerSupply OCTET STRING
  gnAgnLogFileInternalCommunication OCTET STRING
  gnAgnLogFileDeviceFanStatus OCTET STRING
  gnAgnLogFileDeviceODUStatus OCTET STRING
  gnAgnLogFileDeviceIDUStatus OCTET STRING
  gnAgnLogFileOduCelsiusTemp INTEGER
  gnAgnLogFileOduReceiveLevel INTEGER
  gnAgnLogFileOduSynthesizerVCOLock OCTET STRING
  gnAgnLogFileOduPowerSupply OCTET STRING
  gnAgnLogFileLineBERCur INTEGER
  gnAgnLogFileRadioBERCur INTEGER
  gnAgnLogFileModStatus INTEGER
  gnAgnLogFileDemodStatus INTEGER
  gnAgnLogFileLastDemodDefectBlocks INTEGER
  gnAgnLogFileLastDemodBytesCorrected INTEGER
  gnAgnLogFileLastDemodBlocksCorrected INTEGER
  gnAgnLogFileUniqueId INTEGER
  gnAgnLogFileSource INTEGER
  gnAgnLogFileTimeT INTEGER

GnAgnInExternAlarmEntry  
SEQUENCE    
  gnAgnInExternAlarmDevId INTEGER
  gnAgnInExternAlarmIndex INTEGER
  gnAgnInExternAlarmEnable INTEGER
  gnAgnInExternAlarmText DisplayString
  gnAgnInExternAlarmSeverity INTEGER

GnAgnOutRelayAlarmEntry  
SEQUENCE    
  gnAgnOutRelayAlarmDevId INTEGER
  gnAgnOutRelayAlarmIndex INTEGER
  gnAgnOutRelayAlarmType INTEGER

GnAgnInternalDownloadEntry  
SEQUENCE    
  gnAgnInternalDownloadId INTEGER
  gnAgnInternalDownloadOperation INTEGER
  gnAgnInternalDownloadAction INTEGER
  gnAgnInternalDownloadStatus INTEGER
  gnAgnInternalDownloadBlockCount INTEGER
  gnAgnInternalDownloadVersionControl INTEGER
  gnAgnInternalDownloadFileSizeInBytes INTEGER
  gnAgnInternalDownloadBytesCount INTEGER

GnAgnInterLinkEntry  
SEQUENCE    
  gnAgnInterLinkId INTEGER
  gnAgnInterLinkSide INTEGER
  gnAgnInterLinkSource INTEGER
  gnAgnInterLinkDestination INTEGER
  gnAgnInterLinkSoftware INTEGER
  gnAgnInterLinkAction INTEGER
  gnAgnInterLinkStatus INTEGER
  gnAgnInterLinkBlockCount INTEGER

GnSoftwareVersionEntry  
SEQUENCE    
  gnSoftwareVersionId INTEGER
  gnSoftwareVersionIDU DisplayString
  gnSoftwareVersionMUX DisplayString
  gnSoftwareVersionODU DisplayString
  gnSoftwareVersionIDUPostResetVersion DisplayString
  gnSoftwareVersionMUXPostResetVersion DisplayString
  gnSoftwareVersionODUPostResetVersion DisplayString
  gnSoftwareVersionMuxAlteraVer DisplayString
  gnSoftwareIDCVersionControl INTEGER
  gnSoftwareVersionWSAlteraVer DisplayString
  gnSoftwareVersionWSPostResetVersion DisplayString
  gnSoftwareVersionMrmcVer DisplayString
  gnSoftwareVersionMrmcPostResetVer DisplayString
  gnSoftwareVersionBootSoftVer DisplayString
  gnSoftwareVersionBootFlashVer DisplayString
  gnSoftwareVersionAcmLutVer DisplayString
  gnSoftwareVersionAcmLutVerPostResetVer DisplayString
  gnSoftwareVersionSfdVer DisplayString

GnAgnInBandMngXChannelEntry  
SEQUENCE    
  gnAgnInBandMngXChannelId INTEGER
  gnAgnInBandMngXChannelIfIndex INTEGER
  gnAgnInBandMngXChannelType INTEGER
  gnAgnInBandMngXChannelState INTEGER
  gnAgnInBandMngXChannelNeighborIP IpAddress
  gnAgnInBandMngXChannelStatus INTEGER

GnNeighborInBandEntry  
SEQUENCE    
  gnNeighborInBandIP IpAddress
  gnNeighborInBandStatus INTEGER

GnNeighborInBandXEntry  
SEQUENCE    
  gnNeighborInBandXId INTEGER
  gnNeighborInBandXIP IpAddress

GnNeighborIpEntry  
SEQUENCE    
  gnNeighborIpDetectMode INTEGER
  gnNeighborIpAddress IpAddress
  gnNeighborIpRemoteIfIndex INTEGER
  gnNeighborIpRemoteType INTEGER

GnSoftwareDrawerVersionEntry  
SEQUENCE    
  gnSoftwareDrawerId INTEGER
  gnSoftwareDrawerVersionMUX DisplayString
  gnSoftwareDrawerVersionMUXPostResetVersion DisplayString
  gnSoftwareDrawerVersionODU DisplayString
  gnSoftwareDrawerVersionODUPostResetVersion DisplayString
  gnSoftwareDrawerVersionModemFile DisplayString
  gnSoftwareDrawerVersionModemFilePostResetVersion DisplayString
  gnSoftwareDrawerVersionModemScript DisplayString
  gnSoftwareDrawerVersionModemScriptPostResetVersion DisplayString
  gnSoftwareDrawerVersionRfuFpgaVersion DisplayString

GnAgnCurrentAlarmEntry  
SEQUENCE    
  gnAgnCurrentAlarmCounter INTEGER
  gnAgnCurrentAlarmSeverity INTEGER
  gnAgnCurrentAlarmId INTEGER
  gnAgnCurrentAlarmIfIndex INTEGER
  gnAgnCurrentAlarmOrigin INTEGER
  gnAgnCurrentAlarmUnit INTEGER
  gnAgnCurrentAlarmTrapID INTEGER
  gnAgnCurrentAlarmTimeT INTEGER
  gnAgnCurrentAlarmText DisplayString

GnApplicFileEntry  
SEQUENCE    
  gnApplicFileId INTEGER
  gnApplicFileName DisplayString
  gnApplicFileVersion DisplayString
  gnApplicFileCreateDate OCTET STRING
  gnApplicFileDownloadDate OCTET STRING
  gnApplicFileType INTEGER
  gnApplicFileSubType DisplayString
  gnApplicFileFirmware INTEGER
  gnApplicFileGeneralPurpose INTEGER
  gnApplicFileSize INTEGER
  gnApplicFileCompressed INTEGER
  gnApplicFileDssSupport INTEGER
  gnApplicFileCrcSupport INTEGER

GnOduCfgEntry  
SEQUENCE    
  gnOduCfgTransmitterFrequency INTEGER
  gnOduCfgRLPerfMonThresh1 INTEGER
  gnOduCfgRLPerfMonThresh2 INTEGER
  gnOduCfgATPCStatus INTEGER
  gnOduCfgMUTEStatus INTEGER
  gnOduCfgAntennaType INTEGER
  gnOduCfgTransmitLevel INTEGER
  gnOduCfgRealTxFreqNumber INTEGER
  gnOduCfgRealRxFreqNumber INTEGER
  gnOduCfgMinTxFreqNumber INTEGER
  gnOduCfgMaxTxFreqNumber INTEGER
  gnOduCfgMaxTxLevel INTEGER
  gnOduCfgRefRsl INTEGER
  gnOduCfgForceRmtMuteTx INTEGER
  gnOduCfgForceRmtMaxTx INTEGER
  gnOduCfgTLPerfMonThresh1 INTEGER
  gnOduCfgMinRxFreqNumber INTEGER
  gnOduCfgMaxRxFreqNumber INTEGER
  gnOduCfgOduLoopSupport INTEGER
  gnOduCfgOduModel INTEGER
  gnOduCfgFreqPlanStandard DisplayString
  gnOduCfgFreqDevider INTEGER

GnOduStatusEntry  
SEQUENCE    
  gnOduStatusCelsiusTemp INTEGER
  gnOduStatusFahrenheitTemp INTEGER
  gnOduStatusTransmitLevel INTEGER
  gnOduStatusReceiveLevel INTEGER
  gnOduStatusSynthesizerVCOLock OCTET STRING
  gnOduStatusPowerSupply OCTET STRING
  gnOduStatusClearLoopTimer INTEGER

GnOduMonCurrEntry  
SEQUENCE    
  gnOduMonCurrMinRL INTEGER
  gnOduMonCurrMaxRL INTEGER
  gnOduMonCurrTLThresh1Exceed Counter
  gnOduMonCurrRLThresh1Exceed Counter
  gnOduMonCurrRLThresh2Exceed Counter
  gnOduMonCurrDayMinRL INTEGER
  gnOduMonCurrDayMaxRL INTEGER
  gnOduMonCurrDayTLThresh1Exceed Counter
  gnOduMonCurrDayRLThresh1Exceed Counter
  gnOduMonCurrDayRLThresh2Exceed Counter
  gnOduMonCurrMinTL INTEGER
  gnOduMonCurrMaxTL INTEGER
  gnOduMonCurrDayMinTL INTEGER
  gnOduMonCurrDayMaxTL INTEGER

GnOduMonIntervalEntry  
SEQUENCE    
  gnOduMonIntervalIdx INTEGER
  gnOduMonIntervalMinRL INTEGER
  gnOduMonIntervalMaxRL INTEGER
  gnOduMonIntervalTLThresh1Exceed Counter
  gnOduMonIntervalEvent OCTET STRING
  gnOduMonIntervalRLThresh1Exceed Counter
  gnOduMonIntervalRLThresh2Exceed Counter
  gnOduMonIntervalMinTL INTEGER
  gnOduMonIntervalMaxTL INTEGER

GnOduMonDayEntry  
SEQUENCE    
  gnOduMonDayIdx INTEGER
  gnOduMonDayMinRL INTEGER
  gnOduMonDayMaxRL INTEGER
  gnOduMonDayTLThresh1Exceed Counter
  gnOduMonDayRLThresh1Exceed Counter
  gnOduMonDayRLThresh2Exceed Counter
  gnOduMonDayMinTL INTEGER
  gnOduMonDayMaxTL INTEGER

GnOduCfgXEntry  
SEQUENCE    
  gnOduCfgXId INTEGER
  gnOduCfgXTxFreqNumLocalRemote INTEGER
  gnOduCfgXRLPerfMonThresh1 INTEGER
  gnOduCfgXRLPerfMonThresh2 INTEGER
  gnOduCfgXATPCStatus INTEGER
  gnOduCfgXMUTEStatus INTEGER
  gnOduCfgXAntennaType INTEGER
  gnOduCfgXTransmitLevel INTEGER
  gnOduCfgXRealTxFreqNumber INTEGER
  gnOduCfgXRealRxFreqNumber INTEGER
  gnOduCfgXMinTxFreqNumber INTEGER
  gnOduCfgXMaxTxFreqNumber INTEGER
  gnOduCfgXMaxTxLevel INTEGER
  gnOduCfgXRefRsl INTEGER
  gnOduCfgXForceRmtMuteTx INTEGER
  gnOduCfgXForceRmtMaxTx INTEGER
  gnOduCfgXTLPerfMonThresh1 INTEGER
  gnOduCfgXOperation INTEGER
  gnOduCfgXODUSerialNumber DisplayString
  gnOduCfgXChannelBandwidth INTEGER
  gnOduCfgXMinRxFreqNumber INTEGER
  gnOduCfgXMaxRxFreqNumber INTEGER
  gnOduCfgXRxFreqNumLocalRemote INTEGER
  gnOduCfgXOduLoopSupport INTEGER
  gnOduCfgXOduModel INTEGER
  gnOduCfgXFreqPlanStandard DisplayString
  gnOduCfgXFreqDevider INTEGER
  gnOduCfgXLoopbackOption INTEGER
  gnOduCfgXxpicClockMode INTEGER
  gnOduCfgXUnfadedReferenceRsl INTEGER
  gnOduCfgXRfuMode INTEGER
  gnOduCfgXRslRouteToConnector INTEGER
  gnOduCfgXDelayCalibrationOperation INTEGER
  gnOduCfgXDelayCalibrationValue INTEGER
  gnOduCfgXDelayCalibrationWgType DisplayString
  gnOduCfgXOduLog INTEGER
  gnOduCfgXOduLogPeriod INTEGER
  gnOduCfgXXpiPerfMonThresh INTEGER

GnOduStatusXEntry  
SEQUENCE    
  gnOduStatusXId INTEGER
  gnOduStatusXCelsiusTemp INTEGER
  gnOduStatusXFahrenheitTemp INTEGER
  gnOduStatusXTransmitLevel INTEGER
  gnOduStatusXReceiveLevel INTEGER
  gnOduStatusXSynthesizerVCOLock OCTET STRING
  gnOduStatusXPowerSupply OCTET STRING
  gnOduStatusXIfcSupported INTEGER
  gnOduStatusXRslDiversity INTEGER
  gnOduStatusXRslCombined INTEGER
  gnOduStatusXRfuAddress INTEGER
  gnOduStatusXMinTransmitLevel INTEGER
  gnOduStatusXOduSWVer DisplayString
  gnOduStatusXOduSWPostVer DisplayString
  gnOduStatusXRfuFwVer DisplayString
  gnOduStatusXValidIntervals INTEGER

GnOduMonCurrXEntry  
SEQUENCE    
  gnOduMonCurrXId INTEGER
  gnOduMonCurrXMinRL INTEGER
  gnOduMonCurrXMaxRL INTEGER
  gnOduMonCurrXTLThresh1Exceed Counter
  gnOduMonCurrXRLThresh1Exceed Counter
  gnOduMonCurrXRLThresh2Exceed Counter
  gnOduMonCurrXDayMinRL INTEGER
  gnOduMonCurrXDayMaxRL INTEGER
  gnOduMonCurrXDayTLThresh1Exceed Counter
  gnOduMonCurrXDayRLThresh1Exceed Counter
  gnOduMonCurrXDayRLThresh2Exceed Counter
  gnOduMonCurrXMinTL INTEGER
  gnOduMonCurrXMaxTL INTEGER
  gnOduMonCurrXDayMinTL INTEGER
  gnOduMonCurrXDayMaxTL INTEGER
  gnOduMonCurrXXpi INTEGER
  gnOduMonCurrXMinXpi INTEGER
  gnOduMonCurrXMaxXpi INTEGER
  gnOduMonCurrXDayMinXpi INTEGER
  gnOduMonCurrXDayMaxXpi INTEGER
  gnOduMonCurrXXpiThreshExceed Counter
  gnOduMonCurrXDayXpiThreshExceed Counter
  gnOduMonCurrXMse INTEGER
  gnOduMonCurrXLastDayIDF INTEGER

GnOduMonIntervalXEntry  
SEQUENCE    
  gnOduMonIntervalXId INTEGER
  gnOduMonIntervalXIdx INTEGER
  gnOduMonIntervalXMinRL INTEGER
  gnOduMonIntervalXMaxRL INTEGER
  gnOduMonIntervalXTLThresh1Exceed Counter
  gnOduMonIntervalXEvent OCTET STRING
  gnOduMonIntervalXRLThresh1Exceed Counter
  gnOduMonIntervalXRLThresh2Exceed Counter
  gnOduMonIntervalXMinTL INTEGER
  gnOduMonIntervalXMaxTL INTEGER
  gnOduMonIntervalXMinXpi INTEGER
  gnOduMonIntervalXMaxXpi INTEGER
  gnOduMonIntervalXXpiThreshExceed Counter
  gnOduMonIntervalXIDF INTEGER

GnOduMonDayXEntry  
SEQUENCE    
  gnOduMonDayXId INTEGER
  gnOduMonDayXIdx INTEGER
  gnOduMonDayXMinRL INTEGER
  gnOduMonDayXMaxRL INTEGER
  gnOduMonDayXTLThresh1Exceed Counter
  gnOduMonDayXRLThresh1Exceed Counter
  gnOduMonDayXRLThresh2Exceed Counter
  gnOduMonDayXMinTL INTEGER
  gnOduMonDayXMaxTL INTEGER
  gnOduMonDayXMinXpi INTEGER
  gnOduMonDayXMaxXpi INTEGER
  gnOduMonDayXXpiThreshExceed Counter
  gnOduMonDayXIDF INTEGER

GnOduMonCurrDiversityXEntry  
SEQUENCE    
  gnOduMonCurrDiversityXId INTEGER
  gnOduMonCurrDiversityXMinRL INTEGER
  gnOduMonCurrDiversityXMaxRL INTEGER
  gnOduMonCurrDiversityXRLThresh1Exceed Counter
  gnOduMonCurrDiversityXRLThresh2Exceed Counter
  gnOduMonCurrDiversityXDayMinRL INTEGER
  gnOduMonCurrDiversityXDayMaxRL INTEGER
  gnOduMonCurrDiversityXDayRLThresh1Exceed INTEGER
  gnOduMonCurrDiversityXDayRLThresh2Exceed INTEGER

GnOduMonIntervalDiversityXEntry  
SEQUENCE    
  gnOduMonIntervalDiversityXId INTEGER
  gnOduMonIntervalDiversityXIdx INTEGER
  gnOduMonIntervalDiversityXMinRL INTEGER
  gnOduMonIntervalDiversityXMaxRL INTEGER
  gnOduMonIntervalDiversityXRLThresh1Exceed Counter
  gnOduMonIntervalDiversityXRLThresh2Exceed Counter

GnOduMonDayDiversityXEntry  
SEQUENCE    
  gnOduMonDayDiversityXId INTEGER
  gnOduMonDayDiversityXIdx INTEGER
  gnOduMonDayDiversityXMinRL INTEGER
  gnOduMonDayDiversityXMaxRL INTEGER
  gnOduMonDayDiversityXRLThresh1Exceed Counter
  gnOduMonDayDiversityXRLThresh2Exceed Counter

GnOduMonCurrCombinedXEntry  
SEQUENCE    
  gnOduMonCurrCombinedXId INTEGER
  gnOduMonCurrCombinedXMinRL INTEGER
  gnOduMonCurrCombinedXMaxRL INTEGER
  gnOduMonCurrCombinedXRLThresh1Exceed Counter
  gnOduMonCurrCombinedXRLThresh2Exceed Counter
  gnOduMonCurrCombinedXDayMinRL INTEGER
  gnOduMonCurrCombinedXDayMaxRL INTEGER
  gnOduMonCurrCombinedXDayRLThresh1Exceed INTEGER
  gnOduMonCurrCombinedXDayRLThresh2Exceed INTEGER

GnOduMonIntervalCombinedXEntry  
SEQUENCE    
  gnOduMonIntervalCombinedXId INTEGER
  gnOduMonIntervalCombinedXIdx INTEGER
  gnOduMonIntervalCombinedXMinRL INTEGER
  gnOduMonIntervalCombinedXMaxRL INTEGER
  gnOduMonIntervalCombinedXRLThresh1Exceed Counter
  gnOduMonIntervalCombinedXRLThresh2Exceed Counter

GnOduMonDayCombinedXEntry  
SEQUENCE    
  gnOduMonDayCombinedXId INTEGER
  gnOduMonDayCombinedXIdx INTEGER
  gnOduMonDayCombinedXMinRL INTEGER
  gnOduMonDayCombinedXMaxRL INTEGER
  gnOduMonDayCombinedXRLThresh1Exceed Counter
  gnOduMonDayCombinedXRLThresh2Exceed Counter

GnMdmStatEntry  
SEQUENCE    
  gnMdmModStatus INTEGER
  gnMdmDemodStatus INTEGER
  gnMdmDefectBlocks INTEGER
  gnMdmBytesCorrected INTEGER
  gnMdmClearBC INTEGER

GnMdmStatXEntry  
SEQUENCE    
  gnMdmStatXId INTEGER
  gnMdmStatXStandardOrg INTEGER
  gnMdmStatXRemoteConnection INTEGER
  gnMdmStatXModemType INTEGER
  gnMdmStatXModemWorkTime INTEGER
  gnMdmStatXModemSerialNumber DisplayString
  gnMdmStatXModemFWVer DisplayString
  gnMdmStatXModemFWPostVer DisplayString
  gnMdmStatXModemScriptVer DisplayString
  gnMdmStatXModemScriptPostVer DisplayString
  gnMdmStatXIfLoopbackTimeOut INTEGER
  gnMdmStatXBoardType INTEGER
  gnMdmStatXDefectedBlocks INTEGER
  gnMdmStatXScriptType INTEGER
  gnMdmStatXAcmValidIntervals INTEGER
  gnMdmStatXAcmSignalValid INTEGER
  gnMdmStatXTxConstellation INTEGER
  gnMdmStatXRxConstellation INTEGER

GnMdmCfgEntry  
SEQUENCE    
  gnMdmCfgId INTEGER
  gnMdmCfgDiversityMode INTEGER

GnMdmCfgXEntry  
SEQUENCE    
  gnMdmCfgXId INTEGER
  gnMdmCfgXLatencyType INTEGER
  gnMdmCfgXLinkId INTEGER
  gnMdmCfgXRadioSide INTEGER
  gnMdmCfgXMrmcConf INTEGER
  gnMdmCfgXIfLoopback INTEGER
  gnMdmCfgXHwReset INTEGER
  gnMdmCfgXPrbsTest INTEGER
  gnMdmCfgXClearCounters INTEGER
  gnMdmCfgXAcmOperationMode INTEGER
  gnMdmCfgXAcmMaximumConstellation INTEGER

GnMdmAcmStatXEntry  
SEQUENCE    
  gnMdmAcmStatXId INTEGER
  gnMdmAcmStatXQamId INTEGER
  gnMdmAcmStatXRoundedThroughput INTEGER
  gnMdmAcmStatXSupportedThroughput INTEGER

GnMdmAcmMonCurrXEntry  
SEQUENCE    
  gnMdmAcmMonCurrXId INTEGER
  gnMdmAcmMonCurrXMinConstellation INTEGER
  gnMdmAcmMonCurrXMaxConstellation INTEGER
  gnMdmAcmMonCurrXIDF INTEGER
  gnMdmAcmMonCurrXDayMinConstellation INTEGER
  gnMdmAcmMonCurrXDayMaxConstellation INTEGER
  gnMdmAcmMonCurrXDayIDF INTEGER

GnMdmAcmMonIntervalXEntry  
SEQUENCE    
  gnMdmAcmMonIntervalXId INTEGER
  gnMdmAcmMonIntervalXIdx INTEGER
  gnMdmAcmMonIntervalXMinConstellation INTEGER
  gnMdmAcmMonIntervalXMaxConstellation INTEGER
  gnMdmAcmMonIntervalXIDF INTEGER

GnMdmAcmMonDayXEntry  
SEQUENCE    
  gnMdmAcmMonDayXId INTEGER
  gnMdmAcmMonDayXIdx INTEGER
  gnMdmAcmMonDayXMinConstellation INTEGER
  gnMdmAcmMonDayXMaxConstellation INTEGER
  gnMdmAcmMonDayXIDF INTEGER

GnSpiCfgEntry  
SEQUENCE    
  gnSpiCfgConnector INTEGER

GnRstCfgEntry  
SEQUENCE    
  gnRstCfgTransmittedJ0 DisplayString
  gnRstCfgExpectedJ0 DisplayString
  gnRstCfgTransparencyJ0 INTEGER
  gnRstCfgRSTAISMode INTEGER
  gnRstCfgRstEXCThresh INTEGER
  gnRstCfgRstSDThresh INTEGER
  gnRstCfgTransparencyE1 INTEGER
  gnRstCfgTransparencyF1 INTEGER
  gnRstCfgTransparencyUnscrambled INTEGER
  gnRstCfgMngByteLocation INTEGER
  gnRstCfgE1waysideChannel INTEGER
  gnRstCfgTransparencyDCCR INTEGER
  gnRstCfgTransparencyB1Chan INTEGER
  gnRstCfgTestActivate OCTET STRING
  gnRstCfgLoopbackOption INTEGER

GnRstStatEntry  
SEQUENCE    
  gnRstStatReceivedJ0 DisplayString
  gnRstStatBERCur INTEGER
  gnRstStatStatus OCTET STRING
  gnRstStatClearLoopTimer INTEGER

GnRstMonCurrEntry  
SEQUENCE    
  gnRstMonCurrBBE Gauge
  gnRstMonCurrUAS Gauge
  gnRstMonCurrLastDayES Gauge
  gnRstMonCurrLastDaySES Gauge
  gnRstMonCurrLastDayBBE Gauge
  gnRstMonCurrLastDayUAS Gauge
  gnRstMonCurrLastDayOFS Gauge
  gnRstMonCurrLastDayIDF INTEGER

GnRstMonIntervalEntry  
SEQUENCE    
  gnRstMonIntervalIdx INTEGER
  gnRstMonIntervalBBE Gauge
  gnRstMonIntervalUAS Gauge
  gnRstMonIntervalIDF INTEGER

GnRstMonDayEntry  
SEQUENCE    
  gnRstMonDayIdx INTEGER
  gnRstMonDayES Gauge
  gnRstMonDaySES Gauge
  gnRstMonDayBBE Gauge
  gnRstMonDayUAS Gauge
  gnRstMonDayOFS Gauge
  gnRstMonDayIDF INTEGER

GnMstCfgEntry  
SEQUENCE    
  gnMstCfgEXCThresh INTEGER
  gnMstCfgSDThresh INTEGER

GnMstStatEntry  
SEQUENCE    
  gnMstStatReceivedS1 INTEGER
  gnMstStatStatus OCTET STRING
  gnMstStatTransmitS1 INTEGER
  gnMstStatCurrentBer INTEGER
  gnMstStatReceivedK1 INTEGER
  gnMstStatReceivedK2 INTEGER
  gnMstStatTransmitK1 INTEGER
  gnMstStatTransmitK2 INTEGER

GnMstMonCurrEntry  
SEQUENCE    
  gnMstMonCurrBBE Gauge
  gnMstMonCurrUAS Gauge
  gnMstMonCurrLastDayES Gauge
  gnMstMonCurrLastDaySES Gauge
  gnMstMonCurrLastDayBBE Gauge
  gnMstMonCurrLastDayUAS Gauge

GnMstMonIntervalEntry  
SEQUENCE    
  gnMstMonIntervalIdx INTEGER
  gnMstMonIntervalBBE Gauge
  gnMstMonIntervalUAS Gauge

GnMstMonDayEntry  
SEQUENCE    
  gnMstMonDayIdx INTEGER
  gnMstMonDayES Gauge
  gnMstMonDaySES Gauge
  gnMstMonDayBBE Gauge
  gnMstMonDayUAS Gauge

GnMstFarEndMonCurrEntry  
SEQUENCE    
  gnMstFarEndMonCurrBBE Gauge
  gnMstFarEndMonCurrUAS Gauge
  gnMstFarEndMonCurrLastDayES Gauge
  gnMstFarEndMonCurrLastDaySES Gauge
  gnMstFarEndMonCurrLastDayBBE Gauge
  gnMstFarEndMonCurrLastDayUAS Gauge

GnMstFarEndMonIntervalEntry  
SEQUENCE    
  gnMstFarEndMonIntervalIdx INTEGER
  gnMstFarEndMonIntervalBBE Gauge
  gnMstFarEndMonIntervalUAS Gauge

GnMstFarEndMonDayEntry  
SEQUENCE    
  gnMstFarEndMonDayIdx INTEGER
  gnMstFarEndMonDayES Gauge
  gnMstFarEndMonDaySES Gauge
  gnMstFarEndMonDayBBE Gauge
  gnMstFarEndMonDayUAS Gauge

GnHptCfgEntry  
SEQUENCE    
  gnHptCfgTransmittedJ1 DisplayString
  gnHptCfgExpectedJ1 DisplayString
  gnHptCfgMismatchJ1 INTEGER
  gnHptCfgTransparencyJ1 INTEGER
  gnHptCfgEXCThresh INTEGER
  gnHptCfgSDThresh INTEGER
  gnHptCfgTug3Structure1 OCTET STRING
  gnHptCfgTug3Structure2 OCTET STRING
  gnHptCfgTug3Structure3 OCTET STRING
  gnHptCfgSignalLabelMismatch INTEGER
  gnHptCfgTrailPT1 OCTET STRING
  gnHptCfgTrailPT2 OCTET STRING
  gnHptCfgTrailPT3 OCTET STRING

GnHptStatEntry  
SEQUENCE    
  gnHptStatReceivedJ1 DisplayString
  gnHptStatStatus OCTET STRING
  gnHptStatCurrentBer INTEGER
  gnHptStatFarEndCurrentBer INTEGER
  gnHptStatReceivedSignalLabel OCTET STRING

GnHptMonCurrEntry  
SEQUENCE    
  gnHptMonCurrBBE Gauge
  gnHptMonCurrUAS Gauge
  gnHptMonCurrLastDayES Gauge
  gnHptMonCurrLastDaySES Gauge
  gnHptMonCurrLastDayBBE Gauge
  gnHptMonCurrLastDayUAS Gauge

GnHptMonIntervalEntry  
SEQUENCE    
  gnHptMonIntervalIdx INTEGER
  gnHptMonIntervalBBE Gauge
  gnHptMonIntervalUAS Gauge

GnHptMonDayEntry  
SEQUENCE    
  gnHptMonDayIdx INTEGER
  gnHptMonDayES Gauge
  gnHptMonDaySES Gauge
  gnHptMonDayBBE Gauge
  gnHptMonDayUAS Gauge

GnHptFarEndMonCurrEntry  
SEQUENCE    
  gnHptFarEndMonCurrBBE Gauge
  gnHptFarEndMonCurrUAS Gauge
  gnHptFarEndMonCurrLastDayES Gauge
  gnHptFarEndMonCurrLastDaySES Gauge
  gnHptFarEndMonCurrLastDayBBE Gauge
  gnHptFarEndMonCurrLastDayUAS Gauge

GnHptFarEndMonIntervalEntry  
SEQUENCE    
  gnHptFarEndMonIntervalIdx INTEGER
  gnHptFarEndMonIntervalBBE Gauge
  gnHptFarEndMonIntervalUAS Gauge

GnHptFarEndMonDayEntry  
SEQUENCE    
  gnHptFarEndMonDayIdx INTEGER
  gnHptFarEndMonDayES Gauge
  gnHptFarEndMonDaySES Gauge
  gnHptFarEndMonDayBBE Gauge
  gnHptFarEndMonDayUAS Gauge

GnLptCfgEntry  
SEQUENCE    
  gnLptCfgEXCThresh INTEGER
  gnLptCfgSDThresh INTEGER

GnLptStatEntry  
SEQUENCE    
  gnLptStatReceivedJ2 DisplayString
  gnLptStatStatus OCTET STRING
  gnLptStatProtectionMode INTEGER
  gnLptStatCurrentBer INTEGER
  gnLptStatFarEndCurrentBer INTEGER
  gnLptStatReceivedSignalLabel OCTET STRING
  gnLptStatKLM INTEGER

GnLptMonCurrEntry  
SEQUENCE    
  gnLptMonCurrBBE Gauge
  gnLptMonCurrUAS Gauge
  gnLptMonCurrLastDayES Gauge
  gnLptMonCurrLastDaySES Gauge
  gnLptMonCurrLastDayBBE Gauge
  gnLptMonCurrLastDayUAS Gauge

GnLptMonIntervalEntry  
SEQUENCE    
  gnLptMonIntervalIdx INTEGER
  gnLptMonIntervalBBE Gauge
  gnLptMonIntervalUAS Gauge

GnLptMonDayEntry  
SEQUENCE    
  gnLptMonDayIdx INTEGER
  gnLptMonDayES Gauge
  gnLptMonDaySES Gauge
  gnLptMonDayBBE Gauge
  gnLptMonDayUAS Gauge

GnLptFarEndMonCurrEntry  
SEQUENCE    
  gnLptFarEndMonCurrBBE Gauge
  gnLptFarEndMonCurrUAS Gauge
  gnLptFarEndMonCurrLastDayES Gauge
  gnLptFarEndMonCurrLastDaySES Gauge
  gnLptFarEndMonCurrLastDayBBE Gauge
  gnLptFarEndMonCurrLastDayUAS Gauge

GnLptFarEndMonIntervalEntry  
SEQUENCE    
  gnLptFarEndMonIntervalIdx INTEGER
  gnLptFarEndMonIntervalBBE Gauge
  gnLptFarEndMonIntervalUAS Gauge

GnLptFarEndMonDayEntry  
SEQUENCE    
  gnLptFarEndMonDayIdx INTEGER
  gnLptFarEndMonDayES Gauge
  gnLptFarEndMonDaySES Gauge
  gnLptFarEndMonDayBBE Gauge
  gnLptFarEndMonDayUAS Gauge

GnMuxCfgXEntry  
SEQUENCE    
  gnMuxCfgXId INTEGER
  gnMuxCfgXWsAdmin INTEGER
  gnMuxCfgXWsLoopback INTEGER
  gnMuxCfgXHwReset INTEGER
  gnMUXCfgXTempLicenseEnable INTEGER
  gnMUXCfgXTempLicenseTimer INTEGER

GnMuxStatXEntry  
SEQUENCE    
  gnMuxStatXId INTEGER
  gnMuxStatXMuxSerialNumber DisplayString
  gnMuxStatXIfLeds OCTET STRING
  gnMuxStatXNumOfIfOnClass1 INTEGER
  gnMuxStatXNumOfIfOnClass2 INTEGER
  gnMuxStatXNumOfIfOnClass3 INTEGER
  gnMuxStatXAesAdmin INTEGER
  gnMuxStatXMuxFWVer DisplayString
  gnMuxStatXMuxFWPostVer DisplayString
  gnMuxStatXBoardConnector INTEGER
  gnMuxStatXBoardType INTEGER

GnAuxGeneralEntry  
SEQUENCE    
  gnAuxGeneralId INTEGER
  gnAuxGeneralSyncIdcDataBase INTEGER

GnWscCfgEntry  
SEQUENCE    
  gnWscCfgId INTEGER
  gnWscCfgChNumber INTEGER
  gnWscCfgRouting INTEGER
  gnWscCfgEnable INTEGER
  gnWscCfgBitRate INTEGER
  gnWscCfgType INTEGER

GnWscStatEntry  
SEQUENCE    
  gnWscStatId INTEGER
  gnWscStatChNumber INTEGER
  gnWscStatBitRateSupport INTEGER

GnEowCfgEntry  
SEQUENCE    
  gnEowCfgId INTEGER
  gnEowCfgEowLeftEnable INTEGER
  gnEowCfgEowRightEnable INTEGER
  gnEowCfgEowCascadeEnable INTEGER

GnEowStatEntry  
SEQUENCE    
  gnEowStatId INTEGER
  gnEowStatEowLeftSupport INTEGER
  gnEowStatEowRightSupport INTEGER

GnUcCfgEntry  
SEQUENCE    
  gnUcCfgId INTEGER
  gnUcCfgChNumber INTEGER
  gnUcCfgRouting INTEGER
  gnUcCfgEnable INTEGER
  gnUcCfgType INTEGER
  gnUcCfgLoopback INTEGER

GnUcStatEntry  
SEQUENCE    
  gnUcStatId INTEGER
  gnUcStatLeftMaxRouteChannel INTEGER
  gnUcStatRightMaxRouteChannel INTEGER

GnProtectCfgEntry  
SEQUENCE    
  gnProtectCfgId INTEGER
  gnProtectCfgSwitchRequest INTEGER
  gnProtectCfgBERSwitch INTEGER
  gnProtectCfgExtInSwitch INTEGER
  gnProtectCfgOption OCTET STRING
  gnProtectCfgUserCommand INTEGER
  gnProtectCfgType INTEGER
  gnProtectCfgProtectionLockout INTEGER
  gnProtectCfgSdBERSwitch INTEGER
  gnProtectCfgMultiRadioBlock INTEGER

GnHitLessCfgEntry  
SEQUENCE    
  gnHitLessCfgId INTEGER
  gnHitLessCfgSwitchEnable INTEGER
  gnHitLessCfgDiversityType INTEGER
  gnHitLessCfgSwitchingMode INTEGER
  gnHitLessCfgRevertTime INTEGER
  gnHitLessCfgManualSwitch INTEGER
  gnHitLessCfgEventCounterCommand INTEGER
  gnHitLessCfgSwitchLock INTEGER

GnHitLessStatEntry  
SEQUENCE    
  gnHitLessStatId INTEGER
  gnHitLessStatReceiverStatus INTEGER
  gnHitLessStatModeStatus INTEGER
  gnHitLessStatEventCounter INTEGER
  gnHitLessStatAlarmStatus OCTET STRING

GnProtectXEntry  
SEQUENCE    
  gnProtectXId INTEGER
  gnProtectXProtectUnitMode INTEGER
  gnProtectXMultiRadioOhRadioSource INTEGER

TopologiesOptionsEntry  
SEQUENCE    
  topologiesOptionsGroupTopology INTEGER 1
  topologiesOptionsMembersCarriers INTEGER 1
  topologiesOptionsProtectingCarriers INTEGER 1
  topologiesOptionsName DisplayString Size(0..20)

LinkGroupingEntry  
SEQUENCE    
  linkGroupingGroupId INTEGER 1..4
  linkGroupingGroupAdmin INTEGER
  linkGroupingGroupTopology INTEGER
  linkGroupingExtraTrafficAdmin INTEGER
  linkGroupingGroupName DisplayString Size(0..40)

ProtectionEntry  
SEQUENCE    
  protectionGroupId INTEGER 1..4
  protectionGroupsProtectionAdmin INTEGER
  protectionNplus1ProtectionMethod INTEGER
  protectionProtectingCarrierId INTEGER 0..15

StandardProtectionEntry  
SEQUENCE    
  standardProtectionGroupId INTEGER 1..4
  standardProtectionSwitchOnEarlyWarning INTEGER
  standardProtectionHighPrioProtectionTh INTEGER
  standardProtectionRevertiveLink INTEGER
  standardProtectionRevertiveSwitchTimeOut INTEGER 1..15

MembersEntry  
SEQUENCE    
  membersGroupId INTEGER 1..4
  membersCarrierId INTEGER 1..15
  membersProtectionPriorityLevel INTEGER

Nplus1ProtectingEntry  
SEQUENCE    
  nplus1ProtectingGroupId INTEGER 1..4
  nplus1ProtectingXCProtectionFraming INTEGER
  nplus1ProtectingProtectedLinkTx INTEGER 0..15
  nplus1ProtectingProtectedLinkRx INTEGER 0..15
  nplus1ProtectingRequestedLinkTx INTEGER 0..15
  nplus1ProtectingRequestedLinkRx INTEGER 0..15
  nplus1ProtectingSwitchToProtectingCommand INTEGER

CarrierProtectionEntry  
SEQUENCE    
  carrierProtectionXCId INTEGER 1..6
  carrierProtectionCarrierId INTEGER 1..15
  carrierProtectionLinkGroupNum INTEGER
  carrierProtectionServedByRemoteXC INTEGER
  carrierProtectionRadioStatus INTEGER
  carrierProtectionLineFraming INTEGER
  carrierProtectionLoopback INTEGER
  carrierProtectionLoopbackTimer INTEGER 0..1440

Nplus1StandardPMCurrEntry  
SEQUENCE    
  nplus1StandardPMCurrCarrierId INTEGER 1..15
  nplus1StandardPMCurrTimeElapsed INTEGER 1..900
  nplus1StandardPMCurrValidIntervals INTEGER 1..96
  nplus1StandardPMCurrLastDayIDF INTEGER
  nplus1StandardPMCurrLastDayGroupNum INTEGER -1..4
  nplus1StandardPMCurrPSAC Gauge
  nplus1StandardPMCurrFSRC Gauge
  nplus1StandardPMCurrPSAD Gauge
  nplus1StandardPMCurrFSRD Gauge
  nplus1StandardPMCurrLastDayPSAC Gauge
  nplus1StandardPMCurrLastDayFSRC Gauge
  nplus1StandardPMCurrLastDayPSAD Gauge
  nplus1StandardPMCurrLastDayFSRD Gauge

Nplus1StandardPMIntervalEntry  
SEQUENCE    
  nplus1StandardPMIntervalCarrierId INTEGER 1..15
  nplus1StandardPMIntervalIdx INTEGER 1..96
  nplus1StandardPMIntervalIDF INTEGER
  nplus1StandardPMIntervalGroupNum INTEGER -1..4
  nplus1StandardPMIntervalPSAC Gauge
  nplus1StandardPMIntervalFSRC Gauge
  nplus1StandardPMIntervalPSAD Gauge
  nplus1StandardPMIntervalFSRD Gauge

Nplus1StandardPMDayEntry  
SEQUENCE    
  nplus1StandardPMDayCarrierId INTEGER 1..15
  nplus1StandardPMDayIdx INTEGER 1..30
  nplus1StandardPMDayIDF INTEGER
  nplus1StandardPMDayGroupNum INTEGER -1..4
  nplus1StandardPMDayPSAC Gauge
  nplus1StandardPMDayFSRC Gauge
  nplus1StandardPMDayPSAD Gauge
  nplus1StandardPMDayFSRD Gauge

GnAccessCfgEntry  
SEQUENCE    
  gnAccessCfgLongCableOption INTEGER
  gnAccessCfgLoopbackOption INTEGER
  gnAccessCfgRunPrbs INTEGER
  gnAccessCfgEXCThresh INTEGER
  gnAccessCfgSDThresh INTEGER
  gnAccessCfgTest INTEGER
  gnAccessCfgLineCoding INTEGER

GnAccessStatEntry  
SEQUENCE    
  gnAccessStatInterfaceBer INTEGER
  gnAccessStatStatus OCTET STRING
  gnAccessStatPrbsBer INTEGER
  gnAccessStatValidIntervals INTEGER

GnFastEthernetCfgEntry  
SEQUENCE    
  gnFastEthernetCfgAutoNegotiation INTEGER
  gnFastEthernetCfgForceSpeed INTEGER
  gnFastEthernetCfgDynamicBand INTEGER
  gnFastEthernetCfgGigabitEthernet INTEGER
  gnFastEthernetCfgDuplexMode INTEGER
  gnFastEthernetCfgQueuingScheme INTEGER

GnFastEthernetStatEntry  
SEQUENCE    
  gnFastEthernetStatStatus OCTET STRING

GnPdhMonCurrEntry  
SEQUENCE    
  gnPdhMonCurrES Gauge
  gnPdhMonCurrSES Gauge
  gnPdhMonCurrBBE Gauge
  gnPdhMonCurrUAS Gauge
  gnPdhMonCurrCV Gauge
  gnPdhMonCurrLastDayES Gauge
  gnPdhMonCurrLastDaySES Gauge
  gnPdhMonCurrLastDayBBE Gauge
  gnPdhMonCurrLastDayUAS Gauge
  gnPdhMonCurrLastDayCV Gauge
  gnPdhMonCurrLastDayIDF INTEGER

GnPdhMonIntervalEntry  
SEQUENCE    
  gnPdhMonIntervalIdx INTEGER
  gnPdhMonIntervalES Gauge
  gnPdhMonIntervalSES Gauge
  gnPdhMonIntervalBBE Gauge
  gnPdhMonIntervalUAS Gauge
  gnPdhMonIntervalCV Gauge
  gnPdhMonIntervalIDF INTEGER

GnPdhMonDayEntry  
SEQUENCE    
  gnPdhMonDayIdx INTEGER
  gnPdhMonDayES Gauge
  gnPdhMonDaySES Gauge
  gnPdhMonDayBBE Gauge
  gnPdhMonDayUAS Gauge
  gnPdhMonDayCV Gauge
  gnPdhMonDayIDF INTEGER

GnFastEthernetMonPrivateEntry  
SEQUENCE    
  gnFastEthernetMonPrivateAlignmentErrors Counter
  gnFastEthernetMonPrivateFcsErrors Counter
  gnFastEthernetMonPrivateFrameTooLongs Counter

GnFastEthernetMonStdHiEntry  
SEQUENCE    
  gnFastEthernetMonStdHiInOctetsHC Counter
  gnFastEthernetMonStdHiInUcastPktsHC Counter
  gnFastEthernetMonStdHiInNUcastPktsHC Counter
  gnFastEthernetMonStdHiOutOctetsHC Counter
  gnFastEthernetMonStdHiOutUcastPktsHC Counter
  gnFastEthernetMonStdHiOutNUcastPktsHC Counter

GnTrailCfgEntry  
SEQUENCE    
  gnTrailCfgTrailName DisplayString
  gnTrailCfgProtection INTEGER
  gnTrailCfgLowPathIndex INTEGER
  gnTrailCfgLowPathSide INTEGER
  gnTrailCfgProtectionOptions INTEGER
  gnTrailCfgMismatchJ2 INTEGER
  gnTrailCfgTransmittedJ2 DisplayString
  gnTrailCfgExpectedJ2 DisplayString
  gnTrailCfgReversionMode INTEGER
  gnTrailCfgProtectionUserCommand INTEGER
  gnTrailCfgHoldOffTime INTEGER
  gnTrailCfgOscillationGuardTime INTEGER
  gnTrailCfgWaitToRestoreTime INTEGER
  gnTrailCfgSignalLabelMismatch INTEGER
  gnTrailCfgBERConsAction INTEGER

GnTribCfgEntry  
SEQUENCE    
  gnTribCfgLowPathIndex INTEGER
  gnTribCfgLowPathSide INTEGER
  gnTribCfgProtection INTEGER
  gnTribCfgProtectionOptions INTEGER
  gnTribCfgReversionMode INTEGER
  gnTribCfgProtectionUserCommand INTEGER
  gnTribCfgHoldOffTime INTEGER
  gnTribCfgOscillationGuardTime INTEGER
  gnTribCfgWaitToRestoreTime INTEGER
  gnTribCfgKLM INTEGER

GnTrailPassThroughEntry  
SEQUENCE    
  gnTrailPassThroughIndex INTEGER
  gnTrailPassThroughName DisplayString

GnGigabitEthernetCfgEntry  
SEQUENCE    
  gnGigabitEthernetCfgPauseFrameGenerating INTEGER
  gnGigabitEthernetCfgMuteOnExcError INTEGER
  gnGigabitEthernetCfgMuteOnSd INTEGER
  gnGigabitEthernetCfgMuteOnRemoteRadioFault INTEGER
  gnGigabitEthernetCfgSpeedAndDuplex INTEGER
  gnGigabitEthernetCfgSchedulerPriorityOption INTEGER
  gnGigabitEthernetCfgSchedulerQueue1Weight INTEGER
  gnGigabitEthernetCfgSchedulerQueue2Weight INTEGER
  gnGigabitEthernetCfgSchedulerQueue3Weight INTEGER
  gnGigabitEthernetCfgSchedulerQueue4Weight INTEGER
  gnGigabitEthernetCfgClassifierFirstPrioUDP INTEGER
  gnGigabitEthernetCfgClassifierPrioBitSource INTEGER
  gnGigabitEthernetCfgClassifierGroupMinVlanId INTEGER
  gnGigabitEthernetCfgClassifierGroupMaxVlanId INTEGER
  gnGigabitEthernetCfgClassifierGroupVlanPriority INTEGER
  gnGigabitEthernetCfgClassifierGroupVlanSet INTEGER
  gnGigabitEthernetCfgAcmMuteOnMinConstellation INTEGER
  gnGigabitEthernetCfgEnableAutomaticTxMute INTEGER
  gnGigabitEthernetCfgTrafficBISTAdmin INTEGER
  gnGigabitEthernetCfgClearStatistics INTEGER
  gnGigabitEthernetCfgPauseFrameForwarding INTEGER
  gnGigabitEthernetCfgPhyLoopback INTEGER

GnVlanEthernetStatEntry  
SEQUENCE    
  gnVlanEthernetStatGroupId INTEGER
  gnVlanEthernetStatMinVlanId INTEGER
  gnVlanEthernetStatMaxVlanId INTEGER
  gnVlanEthernetStatVlanPriority INTEGER

GnGigabitEthernetStatEntry  
SEQUENCE    
  gnGigabitEthernetStatBistErrorSeconds INTEGER
  gnGigabitEthernetStatSpeedAndDuplexSupport OCTET STRING
  gnGigabitEthernetStatValidIntervals INTEGER
  gnGigabitEthernetStatSpeedAndDuplexMode INTEGER

GnGigabitEthernetMonCurrEntry  
SEQUENCE    
  gnGigabitEthernetMonCurrPacketErrorRate INTEGER
  gnGigabitEthernetMonCurrIDF INTEGER
  gnGigabitEthernetMonCurrDayPacketErrorRate INTEGER
  gnGigabitEthernetMonCurrDayIDF INTEGER

GnGigabitEthernetMonIntervalEntry  
SEQUENCE    
  gnGigabitEthernetMonIntervalIdx INTEGER
  gnGigabitEthernetMonIntervalPacketErrorRate INTEGER
  gnGigabitEthernetMonIntervalIDF INTEGER

GnGigabitEthernetMonDayEntry  
SEQUENCE    
  gnGigabitEthernetMonDayIdx INTEGER
  gnGigabitEthernetMonDayPacketErrorRate INTEGER
  gnGigabitEthernetMonDayIDF INTEGER

GnEthStatisticEntry  
SEQUENCE    
  gnEthStatisticIfInOctetsMsb Counter
  gnEthStatisticAFrameReceivedOkLsb Counter
  gnEthStatisticAFrameReceivedOkMsb Counter
  gnEthStatisticCRCAlignErrorsMsb Counter
  gnEthStatisticIfInUcastPktsMsb Counter
  gnEthStatisticBroadcastPktsMsb Counter
  gnEthStatisticMulticastPktsMsb Counter
  gnEthStatisticUndersizePktsMsb Counter
  gnEthStatisticOversizePktsMsb Counter
  gnEthStatisticPkts64OctetMsb Counter
  gnEthStatisticPkts65to127OctetMsb Counter
  gnEthStatisticPkts128to255OctetMsb Counter
  gnEthStatisticPkts256to511OctetMsb Counter
  gnEthStatisticPkts512to1023OctetMsb Counter
  gnEthStatisticPkts1024to1518OctetMsb Counter
  gnEthStatisticRadioTransmitFramesLsb Counter
  gnEthStatisticRadioTransmitFramesMsb Counter
  gnEthStatisticDroppedPacketsLsb Counter
  gnEthStatisticDroppedPacketsMsb Counter
  gnEthStatisticRadioReceivedFramesLsb Counter
  gnEthStatisticRadioReceivedFramesMsb Counter
  gnEthStatisticRadioReceivedCrcFramesLsb Counter
  gnEthStatisticRadioReceivedCrcFramesMsb Counter
  gnEthStatisticRadioSyncUnlockEventsLsb Counter
  gnEthStatisticRadioSyncUnlockEventsMsb Counter
  gnEthStatisticAFrameTransmittedOkLsb Counter
  gnEthStatisticAFrameTransmittedOkMsb Counter
  gnEthStatisticIfOutOctetsMsb Counter
  gnEthStatisticEtherStatsPktsMsb Counter
  gnEthStatisticEtherStatsOctetsMsb Counter

Defined Values

ceragon 1.3.6.1.4.1.2281
OBJECT IDENTIFIER    

gnOID 1.3.6.1.4.1.2281.1
OBJECT IDENTIFIER    

gnFirstOID 1.3.6.1.4.1.2281.1.1
OBJECT IDENTIFIER    

gnSystem 1.3.6.1.4.1.2281.2
OBJECT IDENTIFIER    

gnGeneral 1.3.6.1.4.1.2281.2.1
OBJECT IDENTIFIER    

gnGenStandardOrg 1.3.6.1.4.1.2281.2.1.1
This parameter specifies which international standard is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER etsi(2), fcc(3), japan(4), lmds(5), cmds(6), australia(7), other(8)  

gnGenTxFreqRange 1.3.6.1.4.1.2281.2.1.2
This parameter specifies frequency ranges in Hertz. Value 1 to 13 are used when the link is working with channels. The notUsed value is used when the link is working with frequency.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER from37000to37350(2), from37350to37700(3), from37700to38050(4), from38050to38400(5), from38600to38950(6), from38950to39300(7), from39300to39650(8), from39650to40000(9), from37058to37618(10), from37618to38178(11), from38318to38878(12), from38878to39438(13), notUsed(14)  

gnGenRemoteConnection 1.3.6.1.4.1.2281.2.1.3
Is the connection between the local manager and the remote manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER connected(2), disconnected(3)  

gnGenRemoteDistance 1.3.6.1.4.1.2281.2.1.4
This field is the distance between the local and remote ODU, in meters. This attribute does not auto-detect the distance. It is used as part of the unfaded RSL calculation feature in the element manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 100..30000  

gnGenInterLenLocalRemote 1.3.6.1.4.1.2281.2.1.5
This field is the FEC interleaver length - DONT CHANGE THIS FIELD !!!. WRITE will change both local and remote sides.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnGenTxFreqLocalRemote 1.3.6.1.4.1.2281.2.1.6
This parameter indicates the radio TX channel number. WRITE will change both LOCAL and REMOTE sides. Not all radios will support TX frequency change via channel numbers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..20  

gnGenRealTimeandDate 1.3.6.1.4.1.2281.2.1.7
This parameter specifies the real time and date Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal). A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 07 c8 05 1a 0d 1e 0f 00 ( 1992 -5 -26,13:30:15 ) Note that if only local time is known, then timezone information (fields 8-10) is not present.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

gnGenCfgDeviceTable 1.3.6.1.4.1.2281.2.1.8
This table contains general configuration info per device, local and remote.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnGenCfgDeviceEntry

gnGenCfgDeviceEntry 1.3.6.1.4.1.2281.2.1.8.1
Entry containing general configuration information, for both local and remote sides.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnGenCfgDeviceEntry  

gnGenCfgDeviceId 1.3.6.1.4.1.2281.2.1.8.1.1
This value indicates the device table entry (local or Remote).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

gnGenCfgDeviceResetPerfMon 1.3.6.1.4.1.2281.2.1.8.1.2
Reset performance monitoring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reset(2), noAction(3), clearFastEthernetStatistics(4)  

gnGenCfgDeviceOperation 1.3.6.1.4.1.2281.2.1.8.1.3
This parameter allows the NMS to perform operations. (3) will implement software RESET (4) will SET all factory default configurations, including IP address! (5) will CLEAR IDU software NOTE: CLEARING IDU software will cause the IDU to use the factory BOOT software version. 4 and 5 will take place only after reset of the IDU
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), softwareReset(3), setDefaultConf(4), clearMainManagerSoftware(5), resetODU(6), resetMUX(7), resetSwOdu(8)  

gnGenCfgActivateLoopback 1.3.6.1.4.1.2281.2.1.8.1.4
This parameter controls the loop back diagnostics operations. For remote units, only SPI, MUX and MDM loopbacks are allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), loopbackSPI(3), loopbackMDM(5), loopbackOuterSPI(6), localODUloopback(10)  

gnGenCfgF1DataChanConnector 1.3.6.1.4.1.2281.2.1.8.1.5
This is the physical interface of the F1 line data channel (USER CHANNEL connection).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noInterface(1), rs232db25(2), v35(3), rs422db25(4), rj45CoDirect(5), rj45bridge(6), x21db15(7), rs232db9(8)  

gnGenCfgWaySideConnector 1.3.6.1.4.1.2281.2.1.8.1.6
This is the physical interface of the radio E1 way side channel (WAYSIDE CHANNEL connection).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noInterface(1), rs232db25(2), v35(3), rs422db25(4), connectorE1(5), rj45bridge(6), x21db15(7), connectorT1(8), lineSTM4(9), clockUnit2M(10), clockUnit1dot5M(11)  

gnGenCfgActivateChanLoopback 1.3.6.1.4.1.2281.2.1.8.1.7
This parameter controls the USER CHANNEL and WAYSIDE channel loopback diagnostic operations. (3) will activate the 64k data channel loopback (USER CHANNEL) (4) will activate the WAYSIDE CHANNEL loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), loopbackDataChan(3), loopbackWaySide(4)  

gnGenCfgInterLenLocalOnly 1.3.6.1.4.1.2281.2.1.8.1.8
This field is the FEC interleaver length .DONT CAHNGE THIS FIELD !!! . WRITE will change the local side only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnGenCfgSlipIp 1.3.6.1.4.1.2281.2.1.8.1.9
This is the SERIAL interface IP address. Included for future development, not currently supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnGenCfgSlipModemConnection 1.3.6.1.4.1.2281.2.1.8.1.10
The telephone number to which the modem will initialize a call, upon generation of a TRAP. The number must be entered numerically (for example 18001234567).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

gnGenCfgSlipSpeed 1.3.6.1.4.1.2281.2.1.8.1.11
The SERIAL interface baud rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER baud9600(1), baud19200(2), baud38400(3), baud57600(4), baud115200(5)  

gnGenCfgAlarmSeverity 1.3.6.1.4.1.2281.2.1.8.1.12
This field is used only by the element management application Every Trap severity 4 bits. 15 (MAJOR), 7 (MINOR), 3 (WARNING) and 1 (EVENT) options. The first 4 bits ODU Power supply severity, then the Synthesizer severity ,then Tx level then RX level ODU temperature, ODU loopback , IDU power supply , Cable, Modem, IDU temperature, IDU loopbacks, External Alarm 1, External Alarm 2 ,External Alarm 3, External Alarm 4, External Alarm 5, External Alarm 6, External Alarm 7, External Alarm 8, Remote connectivity, LOF, LOS, EXC, SD J0 mismatch and system fault.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(15)  

gnGenCfgODUSerialNumber 1.3.6.1.4.1.2281.2.1.8.1.13
This is the ODU serial number - up to 20 characters
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

gnGenCfgIDUSerialNumber 1.3.6.1.4.1.2281.2.1.8.1.14
This is the IDU serial number - up to 20 characters
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

gnGenCfgAlarmText 1.3.6.1.4.1.2281.2.1.8.1.15
The private trap text, describing the last generated trap text.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

gnGenCfgTrapSeverity 1.3.6.1.4.1.2281.2.1.8.1.16
The current Trap severity, describing the last generated trap severity
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clear(0), event(1), warning(3), minor(7), major(15), critical(31)  

gnGenCfgProductType 1.3.6.1.4.1.2281.2.1.8.1.17
The product type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER accessMux(2), sdhRegenerator(3), narrowBandPdhRepeater(4), accessMuxStm0(5), plex6200(6), adm(7)  

gnGenCfgLeftMediumConnector 1.3.6.1.4.1.2281.2.1.8.1.18
For ACCESS hardware, this indicates the first (left) interface connector.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noInterface(1), twoDS3(2), oneDS3(3), twoE3(4), oneE3(5), oneFastEthernet(6), fiberSTM1(7), electricalSTM1(8), utpSTM1(9), stpSTM1(10), twoSTM1(11), eightE1(12), eightT1(13), hitLess(14), fiberSTM1Trib(15), electricalSTM1Trib(16), hitLessWithBridge(17), opticalFastEthernet(18)  

gnGenCfgMiddleMediumConnector 1.3.6.1.4.1.2281.2.1.8.1.19
For ACCESS hardware, this indicates the second (right)interface connector.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noInterface(1), twoDS3(2), oneDS3(3), twoE3(4), oneE3(5), oneFastEthernet(6), fiberSTM1(7), electricalSTM1(8), utpSTM1(9), stpSTM1(10), twoSTM1(11), eightE1(12), eightT1(13), hitLess(14), fiberSTM1Trib(15), electricalSTM1Trib(16), hitLessWithBridge(17), opticalFastEthernet(18)  

gnGenCfgPrimaryClockSource 1.3.6.1.4.1.2281.2.1.8.1.20
The primary clock source, configurable for ACCESS radios only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internalClock(2), external2MB(3), radioClock(4), fiberClock(5), external2MHz(6), external1AndHalfMB(7), tributaryClock1(8), tributaryClock2(9), tributaryClock3(10), tributaryClock4(11), tributaryClock5(12), tributaryClock6(13), tributaryClock7(14), tributaryClock8(15), tributaryClock9(16), tributaryClock10(17), tributaryClock11(18), tributaryClock12(19), tributaryClock13(20), tributaryClock14(21), tributaryClock15(22), tributaryClock16(23), tribSTM1(24)  

gnGenCfgSecondaryClockSource 1.3.6.1.4.1.2281.2.1.8.1.21
The secondary clock source, configurable for ACCESS radios only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internalClock(2), external2MB(3), radioClock(4), fiberClock(5), external2MHz(6), external1AndHalfMB(7), tributaryClock1(8), tributaryClock2(9), tributaryClock3(10), tributaryClock4(11), tributaryClock5(12), tributaryClock6(13), tributaryClock7(14), tributaryClock8(15), tributaryClock9(16), tributaryClock10(17), tributaryClock11(18), tributaryClock12(19), tributaryClock13(20), tributaryClock14(21), tributaryClock15(22), tributaryClock16(23), tribSTM1(24)  

gnGenCfgTrapOption 1.3.6.1.4.1.2281.2.1.8.1.22
This item defines various trap options (0-31): 0 - SNSN (STANDARD TRAPS DO NOT INCLUDE SERIAL NUMBER) 1 - ASN (ALL TRAPS INCLUDE SERIAL NUMBER) 2 - SNSN, DNLR (DO NOT REPORT LOCAL TRAPS FROM REMOTE IDU) 3 - ASN, DNLR 4 - SNSN, EVT (USE DIFFERENT TRAP ID FOR EACH ALARM TYPE) 5 - ASN, EVT 6 - SNSN, DNLR, EVT 7 - ASN, DNLR, EVT * - Add 8 to your choice for excluding traps with id >= 128. Example: for SNSN, DNLR with this filter write 10 (=8+2). ** - Add another 16 to your choice in order to send 'clear' traps with zero severity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

gnGenCfgCLLI 1.3.6.1.4.1.2281.2.1.8.1.23
Common Language Location Identifier (maximum length: 30)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

gnGenCfgHeartbeatPeriod 1.3.6.1.4.1.2281.2.1.8.1.24
This item defines the number of minutes between each trap
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

gnGenCfgGetRemoteData 1.3.6.1.4.1.2281.2.1.8.1.25
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnGenCfgClearLoopTimeout 1.3.6.1.4.1.2281.2.1.8.1.26
This item defines the clear loopbacks timeout in minutes. possible values: 0..1440. 0 means disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

gnGenCfgSubProductType 1.3.6.1.4.1.2281.2.1.8.1.27
lsb bit: 1 if 1500i or 1528i 0 otherwise.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnGenStatDeviceTable 1.3.6.1.4.1.2281.2.1.9
This table contains general configuration info per device; local and remote.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnGenStatDeviceEntry

gnGenStatDeviceEntry 1.3.6.1.4.1.2281.2.1.9.1
Entry containing general configuration information per device, both local and remote sides.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnGenStatDeviceEntry  

gnGenStatDeviceId 1.3.6.1.4.1.2281.2.1.9.1.1
This value indicates which device is involved in the specific row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2), drawer1(3), drawer2(4)  

gnGenStatDeviceCelsiusTemp 1.3.6.1.4.1.2281.2.1.9.1.2
This is the temperature of the modem of the IDU in degrees of Celsius.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -10..70  

gnGenStatDeviceFahrenheitTemp 1.3.6.1.4.1.2281.2.1.9.1.3
This is the temperature of the modem of the IDU in degrees of Fahrenheit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 14..158  

gnGenStatDevicePowerSupply 1.3.6.1.4.1.2281.2.1.9.1.4
This octet represents the status of the power supplies of the IDU: bit 1 on = 3.3V faulty bit 2 on = -5V faulty bit 3 on = 5V faulty. bit 4 on = +8V faulty
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnGenStatDeviceCable 1.3.6.1.4.1.2281.2.1.9.1.5
Status of the cable to the ODU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(2), short(3), open(4)  

gnGenStatDeviceDryContact 1.3.6.1.4.1.2281.2.1.9.1.6
The status of the dry contacts, Each input status is represented by a bit. When the input is on, the bit value is 0.When the input is off, the bit value is 1. The MSB represents external alarm 8. For example when only external alarm 1 is on the status value will be 0xFE00
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

gnGenStatDeviceLeds 1.3.6.1.4.1.2281.2.1.9.1.7
The status of the IDU front panel LEDs. For the management station use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

gnGenStatInternalCommunication 1.3.6.1.4.1.2281.2.1.9.1.8
The status of internal communication problem bit 1 = 1: between main CPU and ODU CPU. bit 2 = 1: between main CPU and MUX CPU. bit 3 = 1: between master main CPU and slave main CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnGenStatDeviceFanStatus 1.3.6.1.4.1.2281.2.1.9.1.9
The status of the IDU fans 1-2 or 1-4. bit 1 = IDU Fan1 is faulty. bit 2 = IDU Fan2 is faulty. bit 3 = IDU Fan2 is faulty. bit 4 = IDU Fan2 is faulty.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnGenStatDeviceODUStatus 1.3.6.1.4.1.2281.2.1.9.1.10
ODU status reported with this parameter. Bit1 is MSB. The bit is set when a fault occurs. The bit is cleared when the fault clears. bit 1 = Power Supply status bit 2 = Synthesizer lock status bit 3 = Tx level status bit 4 = ATPC status bit 5 = Rx level status bit 6 = Not currently used. bit 7 = Temperature status bit 8 = Not currently used. bit 9 = ODU loopback status. bit 10 = Internal use (by application). bit 11 = Tx is in Mute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

gnGenStatDeviceIDUStatus 1.3.6.1.4.1.2281.2.1.9.1.11
IDU status reported with this parameter. Bit1 is MSB. The bit is set when a fault occurs. The bit is cleared when the fault clears. bit 1 = Power status bit 2 = Cable open status bit 3 = Cable short status bit 4 = Modem Lock status bit 5 = Temperature status bit 6 = No signal from ODU (Phos only) bit 7 = loopback status bit 8 = External alarm 1 status bit 9 = External alarm 2 status bit 10 = External alarm 3 status bit 11 = External alarm 4 status bit 12 = External alarm 5 status bit 13 = External alarm 6 status bit 14 = External alarm 7 status bit 15 = External alarm 8 status bit 16 = Remote connectivity status. bit 17 = Inner communication status. bit 18 = Link ID mismatch status. bit 19 = Configuration mismatch status. bit 20 = Shelf Id mismatch status (Phos only). bit 21 = General HW failure. bit 22 = No power to MUX board. bit 23 = No power to MODEM board. bit 24 = IDC disk firmware cinfiguration mismatch. bit 25 = Modem configuration file. bit 26 = Wayside channel E1/T1 LOS bit 27 = loopback on Wayside channel
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

gnGenStatDeviceRSTStatus 1.3.6.1.4.1.2281.2.1.9.1.12
The bit is set when a fault occurs. The bit is cleared when the fault clears. bit 1 = Line loss of frame status bit 2 = Radio loss of frame status bit 3 = Line EXC status bit 4 = Radio EXC status bit 5 = Line SD status bit 6 = Radio SD status bit 7 = loss of signal status bit 8 = J0 mismatch. bit 9 = Line UNE status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

gnGenChannelBandwidth 1.3.6.1.4.1.2281.2.1.10
The TX channel bandwidth, displayed in 1/100 MHz. For example: An STM-1 ETSI TX channel bandwidth of 56MHz is displayed as the value 5600.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnGenTxFreqNumLocalRemote 1.3.6.1.4.1.2281.2.1.11
Indicates the radio transmit frequency, displayed in 1/100 MHz. WRITE changes the local and remote sides. Only for systems that support frequency configuration (Not channel).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnGenProtocolType 1.3.6.1.4.1.2281.2.1.12
This is the radio mapping protocol. -C represents 'concatenated'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER gnSDH(2), gnSONET(3), gnSONET-C(4), gnSDH-C(5)  

gnGenLinkId 1.3.6.1.4.1.2281.2.1.13
0 for 'old' system that doesn't support the link ID. the user can enter values from 1 to 65535
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

gnGenMibVersion 1.3.6.1.4.1.2281.2.1.14
The current software version supports this MIB version (and the previous MIB versions).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnGenModemType 1.3.6.1.4.1.2281.2.1.15
The system modem type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER gn16QAM(2), gn32QAM(3), gn128QAM(4), gn256QAM(5), gn64QAM(6), gn4QAM(7)  

gnGenRadioSide 1.3.6.1.4.1.2281.2.1.16
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER east(2), west(3)  

gnGenSystemWorkTime 1.3.6.1.4.1.2281.2.1.17
The System Work Time (hours).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnGenRxFreqNumLocalRemote 1.3.6.1.4.1.2281.2.1.18
Indicates the radio receive frequency, displayed in 1/100 MHz. WRITE changes the local and remote sides. Only for systems that support frequency configuration (Not channel).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnGenLastCfgTimeandDate 1.3.6.1.4.1.2281.2.1.19
This parameter specifies the last configuration change time and date Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal). A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 07 c8 05 1a 0d 1e 0f 00 ( 1992 -5 -26,13:30:15 ) Note that if only local time is known, then timezone information (fields 8-10) is not present.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

gnGenMostSevereAlarm 1.3.6.1.4.1.2281.2.1.20
This parameter specifies the current moset severe alarm in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clear(0), event(1), warning(3), minor(7), major(15), critical(31)  

gnGenIdcCfgTable 1.3.6.1.4.1.2281.2.1.21
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnGenIdcCfgEntry

gnGenIdcCfgEntry 1.3.6.1.4.1.2281.2.1.21.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnGenIdcCfgEntry  

gnGenIdcCfgId 1.3.6.1.4.1.2281.2.1.21.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1)  

gnGenIdcCfgXpicMode 1.3.6.1.4.1.2281.2.1.21.1.2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnGenIdcCfgResetPerfMon 1.3.6.1.4.1.2281.2.1.21.1.3
Reset performance monitoring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reset(2), noAction(3), clearFastEthernetStatistics(4)  

gnGenIdcCfgOperation 1.3.6.1.4.1.2281.2.1.21.1.4
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), softwareReset(3), setDefaultConf(4), setIDCDefaultConf(5), hardwareColdReset(6), hardwareSoftReset(7)  

gnGenIdcCfgWaySideConnector 1.3.6.1.4.1.2281.2.1.21.1.5
This is the physical interface of the radio E1 way side channel (WAYSIDE CHANNEL connection).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noInterface(1), connectorE1(2), connectorT1(3), connectorDualE1(4), connectorDualT1(5), connectorDual10baseT(6)  

gnGenIdcCfgHeartbeatPeriod 1.3.6.1.4.1.2281.2.1.21.1.6
This item defines the number of minutes between each trap
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

gnGenIdcCfgClearLoopTimeout 1.3.6.1.4.1.2281.2.1.21.1.7
This item defines the clear loopbacks timeout in minutes. possible values: 0..1440. 0 means disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

gnGenIdcCfgSlipIp 1.3.6.1.4.1.2281.2.1.21.1.8
This is the SERIAL interface IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnGenIdcCfgSlipModemConnection 1.3.6.1.4.1.2281.2.1.21.1.9
The telephone number to which the modem will initialize a call, upon generation of a TRAP. The number must be entered numerically (for example 18001234567).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

gnGenIdcCfgSlipSpeed 1.3.6.1.4.1.2281.2.1.21.1.10
The SERIAL interface baud rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER baud9600(1), baud19200(2), baud38400(3), baud57600(4), baud115200(5)  

gnGenIdcCfgAlarmSeverity 1.3.6.1.4.1.2281.2.1.21.1.11
This field is used only by the element management application.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(15)  

gnGenIdcCfgIDUSerialNumber 1.3.6.1.4.1.2281.2.1.21.1.12
This is the IDU serial number - up to 20 characters
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

gnGenIdcCfgTrapOption 1.3.6.1.4.1.2281.2.1.21.1.13
This item defines various trap options (0-15): 0 - SNSN (STANDARD TRAPS DO NOT INCLUDE SERIAL NUMBER) 1 - ASN (ALL TRAPS INCLUDE SERIAL NUMBER) 2 - SNSN, DNLR (DO NOT REPORT LOCAL TRAPS FROM REMOTE IDU) 3 - ASN, DNLR 4 - SNSN, EVT (EVENTS ARE REPORTED AS TRAPS) 5 - ASN, EVT 6 - SNSN, DNLR, EVT 7 - ASN, DNLR, EVT * - Add 8 to your choice for excluding traps with id >= 128. Example: for SNSN, DNLR with this filter write 10 (=8+2). ** - Add another 16 to your choice in order to send 'clear' traps with zero severity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

gnGenIdcCfgCLLI 1.3.6.1.4.1.2281.2.1.21.1.14
Common Language Location Identifier (maximum length: 30)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

gnGenIdcCfgEowCascadeStatus 1.3.6.1.4.1.2281.2.1.21.1.15
Not used!!.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnGenIdcCfgSerialPPPAdminStatus 1.3.6.1.4.1.2281.2.1.21.1.16
Enable\Disable PPP over serial interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnGenIdcStatTable 1.3.6.1.4.1.2281.2.1.22
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnGenIdcStatEntry

gnGenIdcStatEntry 1.3.6.1.4.1.2281.2.1.22.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnGenIdcStatEntry  

gnGenIdcStatId 1.3.6.1.4.1.2281.2.1.22.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1)  

gnGenIdcStatXpicSupport 1.3.6.1.4.1.2281.2.1.22.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

gnGenIdcStatLeds 1.3.6.1.4.1.2281.2.1.22.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

gnGenIdcStatIDUStatus 1.3.6.1.4.1.2281.2.1.22.1.4
IDU status reported with this parameter. Bit1 is MSB. The bit is set when a fault occurs. The bit is cleared when the fault clears. bit 1 = Fans status bit 2 = configuration mismatch bit 3 = Internal use bit 4 = Internal use bit 5 = XPIC cable swap bit 6 = External alarm 1 status bit 7 = External alarm 2 status bit 8 = External alarm 3 status bit 9 = External alarm 4 status bit 10 = External alarm 5 status bit 12 = External alarm 6 status bit 13 = External alarm 7 status bit 14 = External alarm 8 status bit 15 = Auxiliary interface card is down
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

gnGenIdcStatMMCCardStatus 1.3.6.1.4.1.2281.2.1.22.1.5
Bit1 is MSB. bit 1 = 0=MMC card exist, 1=MMC card not exist bit 2 = MMC card status: 0=ok, 1=fault
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnGenIdcStatDryContact 1.3.6.1.4.1.2281.2.1.22.1.6
The status of the dry contacts, Each input status is represented by a bit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

gnGenIdcStatFanStatus 1.3.6.1.4.1.2281.2.1.22.1.7
The status of the IDU fans 1-2 or 1-4. bit 1 = IDU Fan1 is faulty. bit 2 = IDU Fan2 is faulty. bit 3 = IDU Fan2 is faulty. bit 4 = IDU Fan2 is faulty.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnGenIdcStatLeftDrawerStatus 1.3.6.1.4.1.2281.2.1.22.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noDrawer(2), drawerDown(3), drawerUp(4)  

gnGenIdcStatRightDrawerStatus 1.3.6.1.4.1.2281.2.1.22.1.9
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noDrawer(2), drawerDown(3), drawerUp(4)  

gnGenIdcStatHitlessSupport 1.3.6.1.4.1.2281.2.1.22.1.10
Indication for hitless support.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER supported(2), notSupported(3)  

gnGenIdcStatEowExistence 1.3.6.1.4.1.2281.2.1.22.1.11
This parameter sight physical existence of the EOW connector.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER exist(2), notExist(3)  

gnGenIdcStatEowSupport 1.3.6.1.4.1.2281.2.1.22.1.12
Indication for EOW (cascade) support.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER supported(2), notSupported(3)  

gnGenIdcStatIduPosition 1.3.6.1.4.1.2281.2.1.22.1.13
Indication for idu position.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER upper(2), lower(3), single(4)  

gnGenIdcStatBoardType 1.3.6.1.4.1.2281.2.1.22.1.14
Indication for the board type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER v1(2), v2(3)  

gnGenIdcStatAgentIPAddress 1.3.6.1.4.1.2281.2.1.22.1.15
Indication for the Agent IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

gnGenIdcStatInterfaceConnector 1.3.6.1.4.1.2281.2.1.22.1.16
Indication for the interface connector type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notExist(2), oneFEplus64E1(3), twoFEplus64E1(4)  

gnGenIdcStatIfTableCounter 1.3.6.1.4.1.2281.2.1.22.1.17
This counter is initialize to a random number and increment on every change of the IfTable (This is for NMS use).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnGeneralXTable 1.3.6.1.4.1.2281.2.1.23
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnGeneralXEntry

gnGeneralXEntry 1.3.6.1.4.1.2281.2.1.23.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnGeneralXEntry  

gnGenXId 1.3.6.1.4.1.2281.2.1.23.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnGenXStandardOrg 1.3.6.1.4.1.2281.2.1.23.1.2
This parameter specifies which international standard is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER etsi(2), fcc(3), japan(4), lmds(5), cmds(6), australia(7), other(8)  

gnGenXRemoteConnection 1.3.6.1.4.1.2281.2.1.23.1.3
Is the connection between the local manager and the remote manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER connected(2), disconnected(3)  

gnGenXLinkId 1.3.6.1.4.1.2281.2.1.23.1.4
0 for 'old' system that doesn't support the link ID. the user can enter values from 1 to 65535
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

gnGenXModemType 1.3.6.1.4.1.2281.2.1.23.1.5
The system modem type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER gn16QAM(2), gn32QAM(3), gn128QAM(4), gn256QAM(5), gn64QAM(6), gn4QAM(7)  

gnGenXRadioSide 1.3.6.1.4.1.2281.2.1.23.1.6
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER east(2), west(3)  

gnGenXSystemWorkTime 1.3.6.1.4.1.2281.2.1.23.1.7
The System Work Time (hours).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnGenXOperation 1.3.6.1.4.1.2281.2.1.23.1.8
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), setMuxDefaultConf(3), hardwareColdReset(4), hardwareWarmReset(5), softwareODCReset(6), hardwareODCReset(7), resetAllDrawers(8)  

gnGenXResetPerfMon 1.3.6.1.4.1.2281.2.1.23.1.9
Reset performance monitoring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reset(2), noAction(3), clearFastEthernetStatistics(4)  

gnGenXAlarmSeverity 1.3.6.1.4.1.2281.2.1.23.1.10
This field is used only by the element management application Every Trap severity 4 bits. 15 (MAJOR), 7 (MINOR), 3 (WARNING) and 1 (EVENT) options. The first 4 bits ODU Power supply severity, then the Synthesizer severity ,then Tx level then RX level ODU temperature, ODU loopback , IDU power supply , Cable, Modem, IDU temperature, IDU loopbacks, External Alarm 1, External Alarm 2 ,External Alarm 3, External Alarm 4, External Alarm 5, External Alarm 6, External Alarm 7, External Alarm 8, Remote connectivity, LOF, LOS, EXC, SD J0 mismatch and system fault.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(15)  

gnGenXCarrierSerialNumber 1.3.6.1.4.1.2281.2.1.23.1.11
This is the carrier serial number - up to 20 characters
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

gnGenXMUXSerialNumber 1.3.6.1.4.1.2281.2.1.23.1.12
This is the MUX serial number - up to 20 characters
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

gnGenXProductType 1.3.6.1.4.1.2281.2.1.23.1.13
The product type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER accessMux(2), sdhRegenerator(3), narrowBandPdhRepeater(4), accessMuxStm0(5), plex6200(6), adm(7)  

gnGenXCarrierConnector 1.3.6.1.4.1.2281.2.1.23.1.14
For ACCESS hardware, this indicates the first (left) interface connector.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noInterface(2), oneElectricalSTM1(3), oneFiberSTM1SingleMode(4), oneFiberSTM1MultiMode(5), twoElectricalSTM1(6), twoFiberSTM1SingleMode(7), twoFiberSTM1MultiMode(8), oneFEOnly(9), oneFEplus4E1(10), oneFEplus8E1(11), oneFEplus4T1(12), oneFEplus8T1(13), twoFEOnly(14), twoFEplus4E1(15), twoFEplus8E1(16), twoFEplus4T1(17), twoFEplus8T1(18), oneDS3(19), threeDS3(20), oneE3(21), threeE3(22), oneOpticalGBEOnly(23), oneOpticalGBEPlus8E1(24), oneOpticalGBEPlus8T1(25), oneElectricalGBEOnly(26), oneElectricalGBEPlus8E1(27), oneElectricalGBEPlus8T1(28), oneFEplus64E1(29), oneFEplus64T1(30), eightE1Only(31), eightT1Only(32), oneStm1XC(33), twoStm1XC(34)  

gnGenXInterfacesLeds 1.3.6.1.4.1.2281.2.1.23.1.15
The status of the Interface LEDs. For the management station use. Each two bits represents one led as follows: 00 - Gray, 01 - Green, 10 - Orange, 11 - Red. The led order: Led1 is msb 2 bits , after it led2, till led 16 - 2 lsb bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

gnGenXMultiRateMultiConsConf 1.3.6.1.4.1.2281.2.1.23.1.16
The Link data capacity
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mrmc1528(1), mrmc1550(2), mrmc3156(3), mrmc3150(4), mrmc1228(5), mrmc1540(6), mrmc4410(7), mrmc4420(8), mrmc4440(9), mrmc1125(10), mrmc2050(11), mrmc2030(12), mrmc1340(13), mrmc3756(18), acm56(24), acm50(25), acm28(26)  

gnGenXMultiRateMultiConsSupport 1.3.6.1.4.1.2281.2.1.23.1.17
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

gnGenXWaysideChannel 1.3.6.1.4.1.2281.2.1.23.1.18
Enable Disable drawer wayside channel
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnGenXWaySideLoopback 1.3.6.1.4.1.2281.2.1.23.1.19
This parameter controls the WAYSIDE channel loopback diagnostic operations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noloopback(2), waySideLoop(3)  

gnGenXSyncIdcDataBase 1.3.6.1.4.1.2281.2.1.23.1.20
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), idcToDrawer(3), drawerToIdc(4)  

gnGenXAesEnable 1.3.6.1.4.1.2281.2.1.23.1.21
This parameter defines encryption admin mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(2), disable(3), notSupport(4), systemFailure(5)  

gnGenXAesMkeyMode 1.3.6.1.4.1.2281.2.1.23.1.22
This parameter is not used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER auto(2), manual(3)  

gnGenXActNumOfInterfaceOnClass1 1.3.6.1.4.1.2281.2.1.23.1.23
This value indicates the actual number of interfaces on class 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gnGenXActNumOfInterfaceOnClass2 1.3.6.1.4.1.2281.2.1.23.1.24
This value indicates the actual number of interfaces on class 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gnGenXActNumOfInterfaceOnClass3 1.3.6.1.4.1.2281.2.1.23.1.25
This value indicates the actual number of interfaces on class 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gnGenXEowStatus 1.3.6.1.4.1.2281.2.1.23.1.26
Not used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnGenXTempLicenseEnable 1.3.6.1.4.1.2281.2.1.23.1.27
Set temporary license enable or disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3), notSupported(4)  

gnGenXTempLicenseTimer 1.3.6.1.4.1.2281.2.1.23.1.28
This value indicates the temporary license timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gnGenXDefectBlocks 1.3.6.1.4.1.2281.2.1.23.1.29
The number of defected blocks that could not be corrected by the FEC
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnGenXBytesCorrected 1.3.6.1.4.1.2281.2.1.23.1.30
Number of bytes corrected by the FEC
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnGenXPrbsTest 1.3.6.1.4.1.2281.2.1.23.1.31
This parameter enable the user to activate the PRBS test.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notActive(2), active(3)  

gnGenXClearCounters 1.3.6.1.4.1.2281.2.1.23.1.32
This parameter enable the user to clear the PRBS counters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(2), clearCounters(3)  

gnGenXMuxLicense 1.3.6.1.4.1.2281.2.1.23.1.33
Inidcation for license features. Bit #0-#4 - Ethernet througput limit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

gnGenAddAlarmExtToTraps 1.3.6.1.4.1.2281.2.1.24
If chose 'yes', the Alarm Id, Origin and Unit from gnAgnCurrentAlarmTable will be bind to the end of each private trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(3)  

gnGenFeatureSupport 1.3.6.1.4.1.2281.2.1.25
Inidcation for feature support. msb is for bit #1. The bit is set when a specific feature is support. Bit #1 - Tftp server support. Bit #2 - Cold reset support. Bit #3 - Severity critical for external alarm. Bit #4 - MRMC filter table. Bit #5 - NeighborIP Support Fast and DS3. Bit #6 - Auxiliary channel drawer routing support. Bit #7 - Single drawer external protection support. Bit #8 - dual drawer external protection not support. Bit #9 - Left Drawer XPIC hardware support (0 - support, 1 - not support). Bit #10 - Right Drawer XPIC hardware support (0 - support, 1 - not support). Bit #11 - Internal Protection Not Supported (0 - support, 1 - not support). Bit #12 - One Ws Channel Only (0 - FALSE, 1 - TRUE). Bit #13 - Protect option not support (0 - support, 1 - not support). Bit #14 - UC ethernet support (0 - not support, 1 - support). Bit #15 - WSC only disable (0 - enable & disable, 1 - only disable). Bit #16 - UC only disable (0 - enable & disable, 1 - only disable). Bit #17 - EOW only disable (0 - enable & disable, 1 - only disable). Bit #18 - Left Drawer modem latency Not support (0 - support, 1 - not support). Bit #19 - Right Drawer modem latency Not support (0 - support, 1 - not support). Bit #20 - Clear PM for drawer (0 - support, 1 - not support). Bit #21 - Allow Sync mode in UC#2 (0 - not allow, 1 - allow). Bit #22 - External Alarm Switch not support (0 - support, 1 - not support). Bit #23 - Is Hitless config [Divesity Type,Revertive Mode and Revertive Time] are disable (0 - enable, 1 - disable). Bit #24 - QoS left carrier support (1 - support, 0 - not support). Bit #25 - QoS right carrier support (1 - support, 0 - not support). Bit #26 - ACM left carrier support (1 - support, 0 - not support). Bit #27 - ACM right carrier support (1 - support, 0 - not support). Bit #28 - ACM adaptive left carrier support (1 - support, 0 - not support). Bit #29 - ACM adaptive right carrier support (1 - support, 0 - not support). Bit #30 - Single left board reset not support (0 - support, 1 - not support). Bit #31 - Single right board reset not support (0 - support, 1 - not support). Bit #32 - Left drawer reset not support (0 - support,1 - not support). Bit #33 - Right drawer reset not support (0 - support,1 - not support). Bit #34 - All drawers reset support (0 - not support,1 - support). Bit #35 - License manager not support (0 - support,1 - not support). Bit #36 - Multi radio protection support (1 - support,0 - not support). Bit #37 - Copy IDC to left drawer not support (0 - support,1 - not support). Bit #38 - Copy IDC to right drawer not support (0 - support,1 - not support). Bit #39 - Copy IDC to all drawers support (0 - not support,1 - support). Bit #40 - Gigabit flow control support on left carrier(1 - support,0 - not support). Bit #41 - Gigabit flow control support on right carrier(1 - support,0 - not support). Bit #42 - Gigabit PM and statistics support on left carrier(1 - support,0 - not support). Bit #42 - Gigabit PM and statistics support on right carrier(1 - support,0 - not support).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

gnGeneralMrmcXTable 1.3.6.1.4.1.2281.2.1.26
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnGeneralMrmcXEntry

gnGeneralMrmcXEntry 1.3.6.1.4.1.2281.2.1.26.1
This table indicates the supported modem configuration script for each drawer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnGeneralMrmcXEntry  

gnGenMrmcXId 1.3.6.1.4.1.2281.2.1.26.1.1
Drawer number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnGenMrmcXMrmcVal 1.3.6.1.4.1.2281.2.1.26.1.2
This parameter specifies MRMC value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnGenMrmcXBitRate 1.3.6.1.4.1.2281.2.1.26.1.3
This parameter specifies transfer bit rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnGenMrmcXBandWidth 1.3.6.1.4.1.2281.2.1.26.1.4
This parameter specifies channel band width.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnGenMrmcXQam 1.3.6.1.4.1.2281.2.1.26.1.5
This parameter specifies modem qam.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnGenMrmcXScriptType 1.3.6.1.4.1.2281.2.1.26.1.6
This parameter specifies the type of the script. v1 - Regular MRMC script. v2 - ACM MRMC script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER v1(2), v2(3)  

gnGenDrawerXTable 1.3.6.1.4.1.2281.2.1.27
This table indicates drawer x.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnGenDrawerXEntry

gnGenDrawerXEntry 1.3.6.1.4.1.2281.2.1.27.1
Entry containing drawer x namd and id.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnGenDrawerXEntry  

gnGenDrawerXId 1.3.6.1.4.1.2281.2.1.27.1.1
This value indicates the drawer's id
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnGenDrawerXName 1.3.6.1.4.1.2281.2.1.27.1.2
This value indicates the drawer's name
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

gnGenDrawerXSlot1Status 1.3.6.1.4.1.2281.2.1.27.1.3
notExist - board not exist. powerOff - board inserted and power off. powerOn - board inserted and power on. dbReady - board is power on and DB ready.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notExist(2), powerOff(3), powerOn(4), dbReady(5)  

gnGenDrawerXSlot2Status 1.3.6.1.4.1.2281.2.1.27.1.4
notExist - board not exist. powerOff - board inserted and power off. powerOn - board inserted and power on. dbReady - board is power on and DB ready.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notExist(2), powerOff(3), powerOn(4), dbReady(5)  

gnGenDrawerXDeviceLeds 1.3.6.1.4.1.2281.2.1.27.1.5
The status of the IDU front panel LEDs. For the management station use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

gnGenDrawerXInternalCommunication 1.3.6.1.4.1.2281.2.1.27.1.6
The status of internal communication problem bit 1 = 1: between main CPU and ODU CPU. bit 2 = 1: between main CPU and MUX CPU. bit 3 = 1: between master main CPU and slave main CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnGenDrawerXDeviceIDUStatus 1.3.6.1.4.1.2281.2.1.27.1.7
IDU status reported with this parameter. Bit1 is MSB. The bit is set when a fault occurs. The bit is cleared when the fault clears. bit 1 = Power status bit 2 = Cable open status bit 3 = Cable short status bit 4 = Modem Lock status bit 5 = Temperature status bit 6 = No signal from ODU (Phos only) bit 7 = loopback status bit 8 = External alarm 1 status bit 9 = External alarm 2 status bit 10 = External alarm 3 status bit 11 = External alarm 4 status bit 12 = External alarm 5 status bit 13 = External alarm 6 status bit 14 = External alarm 7 status bit 15 = External alarm 8 status bit 16 = Remote connectivity status. bit 17 = Inner communication status. bit 18 = Link ID mismatch status. bit 19 = Configuration mismatch status. bit 20 = Shelf Id mismatch status (Phos only). bit 21 = General HW failure. bit 22 = No power to MUX board. bit 23 = No power to MODEM board. bit 24 = IDC disk firmware cinfiguration mismatch. bit 25 = Modem configuration file. bit 26 = Wayside channel E1/T1 LOS bit 27 = loopback on Wayside channel
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

gnCluster 1.3.6.1.4.1.2281.2.1.28
OBJECT IDENTIFIER    

cluster 1.3.6.1.4.1.2281.2.1.28.1
OBJECT IDENTIFIER    

clusterSystemType 1.3.6.1.4.1.2281.2.1.28.1.1
This value indicates the system type: Phophorus, Avalon or Unknown Backplane
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(2), p1500(3), t3200(4)  

clusterNumOfSubRacks 1.3.6.1.4.1.2281.2.1.28.1.3
This value indicates the number of subrack, 1st phase supporsts only 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

clusterSubRackNum 1.3.6.1.4.1.2281.2.1.28.1.4
This value indicates the subrack's number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

clusterFloorNum 1.3.6.1.4.1.2281.2.1.28.1.5
This value indicates the subrack's number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..9  

clusterIPBase 1.3.6.1.4.1.2281.2.1.28.1.6
This value indicates the Cluster IP base
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

clusterIDCRole 1.3.6.1.4.1.2281.2.1.28.1.7
This value indicates - ClusterPrime - 2nd floor of 1st rack, SubRackManager - 2nd floor of other racks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clusterPrime(2), member(3), subrackManager(4)  

clusterPrimeIPAddress 1.3.6.1.4.1.2281.2.1.28.1.8
This value enable CV/PV to know the server IP even if it is not connected
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

clusterPeerIPLastChangeTime 1.3.6.1.4.1.2281.2.1.28.1.9
This value indicates The last time when the Peer IP Table changed
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

addressesTable 1.3.6.1.4.1.2281.2.1.28.2
This table indicates the cluster's IP Addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AddressesEntry

addressesEntry 1.3.6.1.4.1.2281.2.1.28.2.1
Entry containing the cluster's IP Addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AddressesEntry  

addressesPeerIPId 1.3.6.1.4.1.2281.2.1.28.2.1.1
This value indicates the peer IP id
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..9  

addressesPeerIPAddress 1.3.6.1.4.1.2281.2.1.28.2.1.2
This value indicates the IP address of a Server/Client.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

primeIDC 1.3.6.1.4.1.2281.2.1.28.3
OBJECT IDENTIFIER    

primeIDCAutoInternalClockDistribution 1.3.6.1.4.1.2281.2.1.28.3.1
This value indicates whether the internal clock distribution is enabled or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

primeIDCSynchronizeClockInCluster 1.3.6.1.4.1.2281.2.1.28.3.2
This value indicates whether to synchronize the clock in the cluster.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noaction(2), synchronize(3)  

backplaneSlotMappingTable 1.3.6.1.4.1.2281.2.1.28.4
This table indicates the cluster's IP Addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BackplaneSlotMappingEntry

backplaneSlotMappingEntry 1.3.6.1.4.1.2281.2.1.28.4.1
Entry containing the cluster's IP Addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BackplaneSlotMappingEntry  

backplaneSlotMappingSubrackId 1.3.6.1.4.1.2281.2.1.28.4.1.1
This value indicates the subrack index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

backplaneSlotMappingFloorId 1.3.6.1.4.1.2281.2.1.28.4.1.2
This value indicates the floor id The 4U floor index (upper) will be 99.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..100  

backplaneSlotMappingDrawerId 1.3.6.1.4.1.2281.2.1.28.4.1.3
For floors 1-3: IDC=1, Drawer 1=2, Drwaer2 =3. For 4U floor (floor #99), Aux=1, Power=2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

backplaneSlotMappingSubDrawerId 1.3.6.1.4.1.2281.2.1.28.4.1.4
This value indicates the sub drawer id IDC, Drawer 1 & 2 will be only 1. XC main (up) will be 1 and XC backup (lower) will be 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2  

backplaneSlotMappingUnitType 1.3.6.1.4.1.2281.2.1.28.4.1.5
The values are the same as in gnAgnCurrentAlarm Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idc(2), odu(3), mux(4), modem(5), drawer(6), unknown(7), none(8), xc(9), auxInterface(10), power(11)  

backplaneSlotMappingUnitNumber 1.3.6.1.4.1.2281.2.1.28.4.1.6
This value indicates the unit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

backplaneSlotMappingUnitIndex 1.3.6.1.4.1.2281.2.1.28.4.1.7
This value indicates the unit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnSubrack 1.3.6.1.4.1.2281.2.1.29
OBJECT IDENTIFIER    

powerInputTable 1.3.6.1.4.1.2281.2.1.29.1
This table indicates the Power Input.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PowerInputEntry

powerInputEntry 1.3.6.1.4.1.2281.2.1.29.1.1
Entry containing the Power Input.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PowerInputEntry  

powerInputId 1.3.6.1.4.1.2281.2.1.29.1.1.1
This value indicates the power input Id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

powerInputAdmin 1.3.6.1.4.1.2281.2.1.29.1.1.2
This value indicates whether the power input Admin is enables or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

powerInputStatus 1.3.6.1.4.1.2281.2.1.29.1.1.3
This value indicates whether the power input is up or down, Notexist when power input card not exist. unknown when no A-Aux.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notexist(2), unknown(3), down(4), up(5)  

powerInputLedStatus 1.3.6.1.4.1.2281.2.1.29.1.1.4
This value, Led1 is MSB 2 bits. Each two bits represents one led:00 - Gray,01 - Blue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

auxiliaryDrawer 1.3.6.1.4.1.2281.2.1.29.2
OBJECT IDENTIFIER    

auxiliaryDrawerAuxCardType 1.3.6.1.4.1.2281.2.1.29.2.1
This value indicates whether the Auxiliary Card type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(2), v1(3)  

auxiliaryDrawerLedsStatus 1.3.6.1.4.1.2281.2.1.29.2.2
This value, Led16 is MSB 2 bits, Led1 is LSB 2 bits. Each two bits represents one led:00 - Gray,01 - Green, 10 - Orange, 11 - Red. Led 1: Status of WSC/UC Ethernet (upper connector, left side). Led 2: Status of WSC/UC Ethernet (upper connector, right side). Led 3: Status of WSC/UC Ethernet (lower connector, left side). Led 4: Status of WSC/UC Ethernet (lower connector, right side). Led 5: Reserved - Status of managment link (upper connector). Led 6: Reserved - Status of managment activity (upper connector). Led 7: Reserved - Status of managment link (lower connector). Led 8: Reserved - Status of managment activity (lower connector). Led 9: Status of WSC E1/T1 (upper connector, left side). Led 10: Status of WSC E1/T1 (upper connector, right side). Led 11: Status of WSC E1/T1 (lower connector, left side). Led 12: Status of WSC E1/T1 (lower connector, right side). Led 13: Status of EOW Cascading (upper connector, left side). Led 14: Status of EOW Cascading (upper connector, right side). Led 15: Reserved - Status of external fans (lower connector, left side). Led 16: Reserved - Status of external fans (lower connector, right side).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

auxiliaryDrawerBoardHWVersion 1.3.6.1.4.1.2281.2.1.29.2.3
This value indicates the EEPROM value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

auxiliaryDrawerBoardFWVersion 1.3.6.1.4.1.2281.2.1.29.2.4
This value indicates the Register value .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

auxiliaryDrawerBoardPostResetFWVersion 1.3.6.1.4.1.2281.2.1.29.2.5
This value indicates the Register value .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

auxiliaryDrawerSerialNumber 1.3.6.1.4.1.2281.2.1.29.2.6
This value indicates the EEPROM value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

auxiliaryDrawerBoardReset 1.3.6.1.4.1.2281.2.1.29.2.7
This value indicates whether to reset board.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noaction(2), reset(3)  

auxiliaryDrawerOrderWireCascading 1.3.6.1.4.1.2281.2.1.29.2.8
This value indicates whether the Order Wire Cascading is enables or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

xcDrawerTable 1.3.6.1.4.1.2281.2.1.29.3
This table indicates the XC Drawer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XCDrawerEntry

xcDrawerEntry 1.3.6.1.4.1.2281.2.1.29.3.1
Entry containing the XC Drawer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XCDrawerEntry  

xcDrawerXCId 1.3.6.1.4.1.2281.2.1.29.3.1.1
This value, 1-2 for 1st rack, 3-4 for 2nd, 5-6 for 3rdy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

xcDrawerLedsStatus 1.3.6.1.4.1.2281.2.1.29.3.1.2
This value, Led1 is MSB 2 bits, Led4 is LSB . Each two bits represents one led:00 - Gray,01 - Green, 10 - Orange, 11 - Red.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

xcDrawerBoardHWVersion 1.3.6.1.4.1.2281.2.1.29.3.1.3
This value indicates the EEPROM value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xcDrawerBoardFWVersion 1.3.6.1.4.1.2281.2.1.29.3.1.4
This value indicates the Register value .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

xcDrawerBoardPostResetFWVersion 1.3.6.1.4.1.2281.2.1.29.3.1.5
This value indicates the Register value .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

xcDrawerSerialNumber 1.3.6.1.4.1.2281.2.1.29.3.1.6
This value indicates the EEPROM value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

xcDrawerResetXCBoard 1.3.6.1.4.1.2281.2.1.29.3.1.7
This value indicates whether to reset XC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noaction(2), reset(3)  

xcDrawerXCSelfTestResult 1.3.6.1.4.1.2281.2.1.29.3.1.8
This value indicates the XC self test result.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER passed(2), failed(3)  

xcDrawerXCActivityRole 1.3.6.1.4.1.2281.2.1.29.3.1.9
This value indicates the XC activity role.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(2), standby(3)  

xcDrawerSyncIdcDataBase 1.3.6.1.4.1.2281.2.1.29.3.1.10
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), idcToXC(3), xcToIdc(4)  

xcDrawerXCConnector 1.3.6.1.4.1.2281.2.1.29.3.1.11
This value indicates the XC activity role.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER oneStm1XC(2)  

gnGenCarrierXTable 1.3.6.1.4.1.2281.2.1.30
This table indicates carrier x.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnGenCarrierXEntry

gnGenCarrierXEntry 1.3.6.1.4.1.2281.2.1.30.1
Entry of carrier x.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnGenCarrierXEntry  

gnGenCarrierXId 1.3.6.1.4.1.2281.2.1.30.1.1
This value indicates the carrier id
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER carrier1(3), carrier2(4)  

gnGenCarrierXResetPerfMon 1.3.6.1.4.1.2281.2.1.30.1.2
Reset performance monitoring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reset(2), noAction(3)  

gnGenCarrierXSyncIdcDataBase 1.3.6.1.4.1.2281.2.1.30.1.3
idcToDrawer - copy configuration from the IDC disk to the HW (this operation istraffic effected). drawerToIdc - copy configuration from HW to IDC disk. this operation used to clear User Configuration Mismatch alarm. idcToAllDrawers - copy configuration from the IDC disk to the all Drawer's HW (this operation istraffic effected).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), idcToDrawer(3), drawerToIdc(4), idcToAllDrawers(5)  

gnAgn 1.3.6.1.4.1.2281.2.2
OBJECT IDENTIFIER    

gnAgnMgrTable 1.3.6.1.4.1.2281.2.2.1
This table indicates the managers list that will receive traps.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnAgnMgrEntry

gnAgnMgrEntry 1.3.6.1.4.1.2281.2.2.1.1
Entry containing the managers IP addresses and the trap filter options.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnAgnMgrEntry  

gnAgnMgrId 1.3.6.1.4.1.2281.2.2.1.1.1
This value indicates an index of a specific manager
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnMgrIP 1.3.6.1.4.1.2281.2.2.1.1.2
This value indicates the managers IP address. WRITE an IP address of all zeroes (0.0.0.0) will remove the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnAgnMgrAlarmGroupMask 1.3.6.1.4.1.2281.2.2.1.1.3
bit mask .1 is 'send a trap' 0 is 'dont send a trap'. The list of alarms from MSB to LSB is: bit 1 = Power Supply Alarm bit 2 = Cable Alarm bit 3 = Temperature Alarm bit 4 = External Alarm bit 5 = Radio Alarm bit 6 = Modem Alarm bit 7 = Line Alarm bit 8 = SDH Alarm bit 9 = BER Alarm bit 10 = System fault Alarm bit 11 = Maintenance Alarm If this field is 0, only standard traps will be sent to the manager
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

gnAgnMgrSeverityFilter 1.3.6.1.4.1.2281.2.2.1.1.4
This is a bit mask value for masking traps according to its severity. There is a bit for each severity. If the relevant bit is on (1), then the Agent will send traps with this severity, and it won't send if the bit is off (0). The list of bits from LSB to MSB: bit 1 (LSB) = Event. bit 2 = Warning. bit 3 = Minor. bit 4 = Major. bit 5 (MSB) = Critical.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnAgnMgrTrapPort 1.3.6.1.4.1.2281.2.2.1.1.5
The Port for sending the trap for each manager (possible values: 70-65535)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 70..65535  

gnAgnLogFileData 1.3.6.1.4.1.2281.2.2.2
OBJECT IDENTIFIER    

gnAgnLogFileMaxEntries 1.3.6.1.4.1.2281.2.2.2.1
The maximum number of entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileValidEntries 1.3.6.1.4.1.2281.2.2.2.2
This is the number of valid entries in the current logfile. When this value exceeds 70% of capacity (100 entries), the management station should store the file in its hard disk. If the management station is not active, the MIB will display up to 100 recent logfile events
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileAction 1.3.6.1.4.1.2281.2.2.2.3
This attribute allows for logfile actions, CLEARing the logfile and/or SAVING the logfile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER clear(2), save(3), saveAndClear(4), noAction(5)  

gnAgnLogFileTable 1.3.6.1.4.1.2281.2.2.2.4
This table is the agents alarm and event log file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnAgnLogFileEntry

gnAgnLogFileEntry 1.3.6.1.4.1.2281.2.2.2.4.1
Entry containing the agents alarm and event log file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnAgnLogFileEntry  

gnAgnLogFileId 1.3.6.1.4.1.2281.2.2.2.4.1.1
This value indicates the index of an alarm logfile entry. Entry 1 is the most recent logfile event
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileValid 1.3.6.1.4.1.2281.2.2.2.4.1.2
This value indicates the validity of the indexed alarm logfile entry. a VALID log entry is (2) and an INVALID entry is (3).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER valid(2), notvalid(3)  

gnAgnLogFileDate 1.3.6.1.4.1.2281.2.2.2.4.1.3
This field is the date the alarm occurred, formatted as YYYY-MM-DD. YYYY represents the year, MM the month and DD -the day.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

gnAgnLogFileTime 1.3.6.1.4.1.2281.2.2.2.4.1.4
This field is the hour the alarm occurred - format HH:MM. HH - Hour, MM - minute
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

gnAgnLogFileSeverity 1.3.6.1.4.1.2281.2.2.2.4.1.5
This value indicates the severity of the alarm, 31 for CRITICAL, 15 for MAJOR, 7 for MINOR, 3 for WARNING and 1 for EVENT.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER event(1), warning(3), minor(7), major(15), critical(31)  

gnAgnLogFileText 1.3.6.1.4.1.2281.2.2.2.4.1.6
This field describes the alarm that occurred. Max length 40 characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

gnAgnLogFileDeviceCelsiusTemp 1.3.6.1.4.1.2281.2.2.2.4.1.7
This is the temperature of the IDU in degrees Celsius, during the alarm acceptance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileDevicePowerSupply 1.3.6.1.4.1.2281.2.2.2.4.1.8
This is the Power supply status of the IDU, during the alarm acceptance bit 1 on = 3.3V faulty bit 2 on = -5V faulty bit 3 on = 5V faulty. bit 4 on = +8V faulty
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnAgnLogFileInternalCommunication 1.3.6.1.4.1.2281.2.2.2.4.1.9
This is the internal communication status of the IDU, during the alarm acceptance bit 1 = 1: between main CPU and ODU CPU. bit 2 = 1: between main CPU and MUX CPU. bit 3 = 1: between master main CPU and slave main CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnAgnLogFileDeviceFanStatus 1.3.6.1.4.1.2281.2.2.2.4.1.10
This is the Fan status of the IDU, during the alarm acceptance bit 1 = Fan1 is faulty. bit 2 = Fan 2 is faulty.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnAgnLogFileDeviceODUStatus 1.3.6.1.4.1.2281.2.2.2.4.1.11
This is the ODU status during the alarm acceptance bit 1 MSB bit 1 = Power Supply status bit 2 = Synthesizer lock status bit 3 = Tx level status bit 4 = ATPC status bit 5 = Rx level status bit 6 = Not currently used bit 7 = Temperature status bit 8 = Not currently used. bit 9 = Not currently used
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

gnAgnLogFileDeviceIDUStatus 1.3.6.1.4.1.2281.2.2.2.4.1.12
This is the IDU status during the alarm acceptance bit 1 MSB bit 1 = Power status - bit 2 = Cable open status - bit 3 = Cable short status - bit 4 = Modem Lock status bit 5 = Temperature status bit 6 = Not currently used. bit 7 = loopback status bit 8 = External alarm 1 status bit 9 = External alarm 2 status bit 10 = External alarm 3 status bit 11 = External alarm 4 status bit 12 = External alarm 5 status bit 13 = External alarm 6 status bit 14 = External alarm 7 status bit 15 = External alarm 8 status bit 16 = Remote connectivity status. bit 17 = Inner communication status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

gnAgnLogFileOduCelsiusTemp 1.3.6.1.4.1.2281.2.2.2.4.1.13
This is the temperature of the ODU in degrees Celsius, during the alarm acceptance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileOduReceiveLevel 1.3.6.1.4.1.2281.2.2.2.4.1.14
This is the received signal level in DBM, during the alarm acceptance
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileOduSynthesizerVCOLock 1.3.6.1.4.1.2281.2.2.2.4.1.15
This is the Synthesizer status, during the alarm acceptance bit 1 on = TX IF synthesizer fault bit 2 on = RX IF synthesizer fault bit 3 on = Xband synthesizer fault bit 4 on = History TX IF synthesizer fault bit 5 on = History RX IF synthesizer fault bit 6 on = History Xband synthesizer fault
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnAgnLogFileOduPowerSupply 1.3.6.1.4.1.2281.2.2.2.4.1.16
This is the ODU power supply status, during the alarm acceptance bit 1 on = +5V faulty bit 2 on = +8V faulty bit 3 on = +12V faulty bit 4 on = -12V faulty.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnAgnLogFileLineBERCur 1.3.6.1.4.1.2281.2.2.2.4.1.17
This is the Line BER (Bit Error Rate), during the alarm acceptance. Included for future development, not currently supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileRadioBERCur 1.3.6.1.4.1.2281.2.2.2.4.1.18
This is the Radio BER (Bit Error Rate), during the alarm acceptance. Included for future development, not currently supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileModStatus 1.3.6.1.4.1.2281.2.2.2.4.1.19
This is the Modulator status, during the alarm acceptance ok(2), modulatorFault(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileDemodStatus 1.3.6.1.4.1.2281.2.2.2.4.1.20
This is the Demodulator status, during the alarm acceptance . This field is for internal use internal debugging
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileLastDemodDefectBlocks 1.3.6.1.4.1.2281.2.2.2.4.1.21
This is the number of the Defected blocks (blocks that couldn't be corrected) by the FEC, during the alarm acceptance last second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileLastDemodBytesCorrected 1.3.6.1.4.1.2281.2.2.2.4.1.22
This is the number of the bytes that were corrected by the FEC, during the alarm acceptance last second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileLastDemodBlocksCorrected 1.3.6.1.4.1.2281.2.2.2.4.1.23
This is the number of the blocks that were corrected by the FEC , during the alarm acceptance last second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileUniqueId 1.3.6.1.4.1.2281.2.2.2.4.1.24
Unique Id for each log from 1 to 2,147,483,647 ( = 0x7FFFFFFF).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileSource 1.3.6.1.4.1.2281.2.2.2.4.1.25
The soure drawer of the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER interfaces(1), idc(2), drawer1(3), drawer2(4), tIdc1(257), tIdc2(258), tIdc3(259), tIdc4(260), tIdc5(261), tIdc6(262), tIdc7(263), tIdc8(264), tIdc9(265), tDrawer1(513), tDrawer2(514), tDrawer3(515), tDrawer4(516), tDrawer5(517), tDrawer6(518), tDrawer7(519), tDrawer8(520), tDrawer9(521), tDrawer10(522), tDrawer11(523), tDrawer12(524), tDrawer13(525), tDrawer14(526), tDrawer15(527), tXC1(769), tXC2(770), tXC3(771), tXC4(772), tXC5(773), tXC6(774)  

gnAgnLogFileTimeT 1.3.6.1.4.1.2281.2.2.2.4.1.26
The time of the alarm represented by the number of seconds from 1.1.1970.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnLogFileHitlessSwitchLogAdmin 1.3.6.1.4.1.2281.2.2.2.5
This attribute allows for hitless logfile actions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnAgnLogFileXCSwitchLogAdmin 1.3.6.1.4.1.2281.2.2.2.6
This attribute allows for XC logfile actions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnAgnExternAlarm 1.3.6.1.4.1.2281.2.2.3
OBJECT IDENTIFIER    

gnAgnInExternAlarmTable 1.3.6.1.4.1.2281.2.2.3.1
This table is the input external alarm table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnAgnInExternAlarmEntry

gnAgnInExternAlarmEntry 1.3.6.1.4.1.2281.2.2.3.1.1
Entry containing the external alarm inputs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnAgnInExternAlarmEntry  

gnAgnInExternAlarmDevId 1.3.6.1.4.1.2281.2.2.3.1.1.1
This value indicates device to which the external alarm is connected - 1 Local, 2 Remote
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

gnAgnInExternAlarmIndex 1.3.6.1.4.1.2281.2.2.3.1.1.2
This value indicates the index of the input external alarm 1 to 8
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

gnAgnInExternAlarmEnable 1.3.6.1.4.1.2281.2.2.3.1.1.3
This value indicates if this Input alarm is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(2), enabled(3)  

gnAgnInExternAlarmText 1.3.6.1.4.1.2281.2.2.3.1.1.4
This field describes the external alarm. Max string 20 characters
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

gnAgnInExternAlarmSeverity 1.3.6.1.4.1.2281.2.2.3.1.1.5
This value indicates the severity of the external alarm 31 CRITICAL ,15 MAJOR, 7 MINOR, 3 WARNING and 1 EVENT.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER event(1), warning(3), minor(7), major(15), critical(31)  

gnAgnOutRelayAlarmTable 1.3.6.1.4.1.2281.2.2.3.2
This table is the output relay alarm table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnAgnOutRelayAlarmEntry

gnAgnOutRelayAlarmEntry 1.3.6.1.4.1.2281.2.2.3.2.1
Entry containing the output relay alarms.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnAgnOutRelayAlarmEntry  

gnAgnOutRelayAlarmDevId 1.3.6.1.4.1.2281.2.2.3.2.1.1
This value indicates device from which the relay is sent from - 1 Local, 2 Remote
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

gnAgnOutRelayAlarmIndex 1.3.6.1.4.1.2281.2.2.3.2.1.2
This value indicates the index of the Output Relay alarm 1 to 5
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..5  

gnAgnOutRelayAlarmType 1.3.6.1.4.1.2281.2.2.3.2.1.3
This value indicates the alarm/led that causes the relay to change its state
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER major(2), minor(3), warning(4), external(5), power(6), ber(7), line(8), loopback(9), lof(10), idu(11), odu(12), cable(13), remote(14), critical(15), testOn(16), off(17), xc(18)  

gnAgnFileTransfer 1.3.6.1.4.1.2281.2.2.4
OBJECT IDENTIFIER    

gnAgnFileTransferDestination 1.3.6.1.4.1.2281.2.2.4.1
The file destination. The file transfer destination will always be set to 1, LOCAL.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER gnLocal(1)  

gnAgnFileTransferServerIP 1.3.6.1.4.1.2281.2.2.4.2
The IP address of the server from which the file is loaded
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnAgnFileTransferFileName 1.3.6.1.4.1.2281.2.2.4.3
The name of the file to be loaded, format 8.3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

gnAgnFileTransferTftpTotalTimeOut 1.3.6.1.4.1.2281.2.2.4.4
Receiving time-out value (seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnAgnFileTransferTransCmd 1.3.6.1.4.1.2281.2.2.4.5
The command to be executed on fileName at fileServerIP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER gnStartMUXSoftwareDownLoad(1), gnStartODUSoftwareDownLoad(2), gnStartMainManagerSoftwareDownLoad(3), gnCancel(4), gnNoOperation(255)  

gnAgnFileTransfertFtpStatus 1.3.6.1.4.1.2281.2.2.4.6
Tftp session status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER gnTftpSessionPreStartSession(1), gnTftpSessionFileError(2), gnTftpSessionRcvBlock(3), gnTftpSessionRcvtimeout(4), gnTftpSessionRcvError(5), gnTftpSessionDone(6), gnNoTftpSession(255)  

gnAgnFileTransfertftpBlockCount 1.3.6.1.4.1.2281.2.2.4.7
The total number of blocks received in the current tFtp session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnFileTransferProtocol 1.3.6.1.4.1.2281.2.2.4.8
File transfer protocol: tftp or ftp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tftp(2), ftp(3)  

gnAgnFileTransferUserName 1.3.6.1.4.1.2281.2.2.4.9
User name - only for ftp protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

gnAgnFileTransferPassword 1.3.6.1.4.1.2281.2.2.4.10
Password - only for ftp protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

gnAgnFileTransferIDCVersionControl 1.3.6.1.4.1.2281.2.2.4.11
Points to the IDC software version to be downloaded
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER version1(1), version2(2)  

gnAgnFileTransferODCVersionControl 1.3.6.1.4.1.2281.2.2.4.12
Points to the ODC software version to be downloaded
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER version1(1), version2(2)  

gnAgnInternalDownloadTable 1.3.6.1.4.1.2281.2.2.5
This table controls the Internal Download process from manager to MUX and ODU (local and remote).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnAgnInternalDownloadEntry

gnAgnInternalDownloadEntry 1.3.6.1.4.1.2281.2.2.5.1
Entry containing the internal download process controls, for local and remote.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnAgnInternalDownloadEntry  

gnAgnInternalDownloadId 1.3.6.1.4.1.2281.2.2.5.1.1
This value indicates an index of a specific Internal Download operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnInternalDownloadOperation 1.3.6.1.4.1.2281.2.2.5.1.2
The Operation Description
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER localMUX(2), localODU(3), remoteMUX(4), remoteODU(5), leftShelfODU(6), rightShelfODU(7)  

gnAgnInternalDownloadAction 1.3.6.1.4.1.2281.2.2.5.1.3
This parameter controls the download action operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER start(2), cancel(3), clear(4), noAction(5), upLoadFpga(6)  

gnAgnInternalDownloadStatus 1.3.6.1.4.1.2281.2.2.5.1.4
Internal download session status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER gnInternalDownloadSessionError(1), gnInternalDownloadSessionClearing(2), gnInternalDownloadSessionSendBlock(3), gnInternalDownloadSessiontimeout(4), gnInternalDownloadSessionDone(5), gnInternalDownloadSessionWaitForRetransmit(6), gnNoInternalDownloadSession(255)  

gnAgnInternalDownloadBlockCount 1.3.6.1.4.1.2281.2.2.5.1.5
The total number of blocks sent in the current session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnInternalDownloadVersionControl 1.3.6.1.4.1.2281.2.2.5.1.6
Points to the software version to be uploaded
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER version1(1), version2(2)  

gnAgnInternalDownloadFileSizeInBytes 1.3.6.1.4.1.2281.2.2.5.1.7
The total number of blocks in the current file
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnInternalDownloadBytesCount 1.3.6.1.4.1.2281.2.2.5.1.8
The number of bytes sent in the current session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnInterLinkTable 1.3.6.1.4.1.2281.2.2.6
This table controls the Inter Link Download process between local and remote masters and between master and slave (local or remote). Each session transfers MUX, ODU or manager (IDC) software.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnAgnInterLinkEntry

gnAgnInterLinkEntry 1.3.6.1.4.1.2281.2.2.6.1
Entry containing the process controls for the interlink download process, for local and remote.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnAgnInterLinkEntry  

gnAgnInterLinkId 1.3.6.1.4.1.2281.2.2.6.1.1
This value indicates the index of a specific InterLink operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnInterLinkSide 1.3.6.1.4.1.2281.2.2.6.1.2
The Link Side
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(2), remote(3)  

gnAgnInterLinkSource 1.3.6.1.4.1.2281.2.2.6.1.3
The source distribution center.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER me(2), mate(3)  

gnAgnInterLinkDestination 1.3.6.1.4.1.2281.2.2.6.1.4
The destination distribution center. The destination may be selected as the local IDU being contacted (me), the collocated local IDU, in a protected configuration (mate) or it may be selected to be the remote IDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER me(2), mate(3), remote(4)  

gnAgnInterLinkSoftware 1.3.6.1.4.1.2281.2.2.6.1.5
The software type to be transferred. MUX, ODU or IDU (referred to as manager).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER manager(2), mux(3), odu(4)  

gnAgnInterLinkAction 1.3.6.1.4.1.2281.2.2.6.1.6
This parameter controls the interlink action operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER start(2), cancel(3), noAction(4)  

gnAgnInterLinkStatus 1.3.6.1.4.1.2281.2.2.6.1.7
Inter-link session status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER gnInterLinkSessionError(1), gnInterLinkSessionClearing(2), gnInterLinkSessionSendBlock(3), gnInterLinkSessiontimeout(4), gnInterLinkSessionDone(5), gnNoInterLinkSession(255)  

gnAgnInterLinkBlockCount 1.3.6.1.4.1.2281.2.2.6.1.8
The total number of blocks sent in the current session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnSoftwareVersionTable 1.3.6.1.4.1.2281.2.2.7
This table contains the IDU, MUX, ODU & WS software versions; local and remote.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnSoftwareVersionEntry

gnSoftwareVersionEntry 1.3.6.1.4.1.2281.2.2.7.1
Entry containing the currently operating IDU, ODU and MUX software versions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnSoftwareVersionEntry  

gnSoftwareVersionId 1.3.6.1.4.1.2281.2.2.7.1.1
The ID indicates which device is involved in the specific row. The software table includes two rows, one for the local radio and one for the remote radio.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

gnSoftwareVersionIDU 1.3.6.1.4.1.2281.2.2.7.1.2
This is the IDU software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionMUX 1.3.6.1.4.1.2281.2.2.7.1.3
This is the MUX software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionODU 1.3.6.1.4.1.2281.2.2.7.1.4
This is the ODU software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionIDUPostResetVersion 1.3.6.1.4.1.2281.2.2.7.1.5
This is the IDU post reset software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionMUXPostResetVersion 1.3.6.1.4.1.2281.2.2.7.1.6
This is the MUX post reset software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionODUPostResetVersion 1.3.6.1.4.1.2281.2.2.7.1.7
This is the ODU post reset software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionMuxAlteraVer 1.3.6.1.4.1.2281.2.2.7.1.8
This string contains the MUX altera versions
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareIDCVersionControl 1.3.6.1.4.1.2281.2.2.7.1.9
Points to the software version that will run on the next reset
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER version1(1), version2(2)  

gnSoftwareVersionWSAlteraVer 1.3.6.1.4.1.2281.2.2.7.1.10
This is the WS software version
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionWSPostResetVersion 1.3.6.1.4.1.2281.2.2.7.1.11
This is the WS post reset software version
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionMrmcVer 1.3.6.1.4.1.2281.2.2.7.1.12
This is the MRMC filter table software version
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionMrmcPostResetVer 1.3.6.1.4.1.2281.2.2.7.1.13
This is the MRMC filter table post reset software version
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionBootSoftVer 1.3.6.1.4.1.2281.2.2.7.1.14
This is the BOOT software version
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionBootFlashVer 1.3.6.1.4.1.2281.2.2.7.1.15
This is the BOOT FLASH version
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionAcmLutVer 1.3.6.1.4.1.2281.2.2.7.1.16
This is the ACM LUT software version
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionAcmLutVerPostResetVer 1.3.6.1.4.1.2281.2.2.7.1.17
This is the ACM LUT post reset software version
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareVersionSfdVer 1.3.6.1.4.1.2281.2.2.7.1.18
This is the SFD software version
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

gnAgnNTPCfg 1.3.6.1.4.1.2281.2.2.8
OBJECT IDENTIFIER    

gnAgnNTPCfgServerIP 1.3.6.1.4.1.2281.2.2.8.1
The IP address of the server from which the current time is loaded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnAgnNTPCfgOffsetFromUTC 1.3.6.1.4.1.2281.2.2.8.2
The offset from Coordinated Universal Time (minutes). Possible values: -1439..1439.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1439..1439  

gnAgnNTPCfgSummerAdjOffset 1.3.6.1.4.1.2281.2.2.8.3
The summer adjustment offset (minutes). Possible values: -1439..1439.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1439..1439  

gnAgnNTPCfgSummerAdjStart 1.3.6.1.4.1.2281.2.2.8.4
The summertime adjustment start. In order to set this value: 1.Turn every parameter (month, day, hour, minute) to hexadecimal. 2.Write them all together - from left to right. 3.Turn the accepted number to decimal basis. For example: in order to set 11:27:1:55 --> 11 = 0x0b, 27 = 0x1b, 1 = 0x01, 55 = 0x37 --> the 4 parameters together: 0x0b1b0137 = 186319159 (the last number is the one to set).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnAgnNTPCfgSummerAdjEnd 1.3.6.1.4.1.2281.2.2.8.5
The summertime adjustment end. In order to set this value: 1.Turn every parameter (month, day, hour, minute) to hexadecimal. 2.Write them all together - from left to right. 3.Turn the accepted number to decimal basis. For example: in order to set 11:27:1:55 --> 11 = 0x0b, 27 = 0x1b, 1 = 0x01, 55 = 0x37 --> the 4 parameters together: 0x0b1b0137 = 186319159 (the last number is the one to set).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnAgnNTPCfgEnableAuth 1.3.6.1.4.1.2281.2.2.8.6
This value indicates if the Authentication is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(2), des(3)  

gnAgnNTPCfgAuthSecretKey 1.3.6.1.4.1.2281.2.2.8.7
The authentication secret key (HEX). Not relevant when authentication is disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

gnAgnNTPCfgAuthPublicKey 1.3.6.1.4.1.2281.2.2.8.8
The authentication public key is an integer number. The valid values: 1-4294967295. Not relevant when authentication is disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

gnAgnNTPCfgUpdateInterval 1.3.6.1.4.1.2281.2.2.8.9
The time interval between sending NTP requests to the NTP server (minutes). Possible values: 1-65535.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

gnAgnNTPCfgProtocolType 1.3.6.1.4.1.2281.2.2.8.10
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ntp(2), sntp(3)  

gnAgnInBandMng 1.3.6.1.4.1.2281.2.2.9
OBJECT IDENTIFIER    

gnAgnInBandMngEthernetIp 1.3.6.1.4.1.2281.2.2.9.1
The ethernet IP of the gateway network element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

gnAgnInBandMngEthernetMask 1.3.6.1.4.1.2281.2.2.9.2
The IP mask of the gateway network element.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnAgnInBandMngPppIp 1.3.6.1.4.1.2281.2.2.9.3
The PPP IP address of the gateway network element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

gnAgnInBandMngPppMask 1.3.6.1.4.1.2281.2.2.9.4
The PPP IP mask of the gateway network element.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnAgnInBandMngDefRoute 1.3.6.1.4.1.2281.2.2.9.5
The IP address of the default gateway/router to the internet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnAgnInBandMngEnable 1.3.6.1.4.1.2281.2.2.9.6
Enable/Disable in-band management.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnAgnInBandMngNetworkElementType 1.3.6.1.4.1.2281.2.2.9.7
The element type of a single unit on the inband network (Gateway or Network Element).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER networkElement(2), gateway(3)  

gnAgnInBandMngRadioChannel 1.3.6.1.4.1.2281.2.2.9.8
The channel the in-band-management goes over (DCCR\DCCMtc.).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dccr(2), dccm(3), mediaSpecific128k(4), proprietary(5), userChannel(6)  

gnAgnInBandMngUnknownPackets 1.3.6.1.4.1.2281.2.2.9.9
Select if unknown packets will be transparently transmitted over the RING or discarded and dropped.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER transparent(2), discard(3)  

gnAgnInBandMngTTL 1.3.6.1.4.1.2281.2.2.9.10
Time To Live.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..64  

gnAgnInBandMngRingIpSubnet 1.3.6.1.4.1.2281.2.2.9.11
The IP subnet address of the ring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnAgnInBandMngRingIpMask 1.3.6.1.4.1.2281.2.2.9.12
The IP mask of the ring subnet address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnAgnInBandMngNetworkId 1.3.6.1.4.1.2281.2.2.9.13
Identification for single link path of PPPoE over cross-networks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

gnAgnInBandMngLineMode 1.3.6.1.4.1.2281.2.2.9.14
Enable the user to force PPPoE mode instead of DCCR line communication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inbandFiber(2), forcePPPoE(3)  

gnAgnInBandMngFiberChannel 1.3.6.1.4.1.2281.2.2.9.15
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dccr(2), dccm(3), userChannel(5)  

gnAgnInBandMngTribChannel 1.3.6.1.4.1.2281.2.2.9.16
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(2), dccr(3), dccm(4)  

gnAgnInBandMngXChannelTable 1.3.6.1.4.1.2281.2.2.9.17
This table defines the inband channels mapping.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnAgnInBandMngXChannelEntry

gnAgnInBandMngXChannelEntry 1.3.6.1.4.1.2281.2.2.9.17.1
This is an entry in the inband channel table. This table contains a row for every channel (1..4). First 3 physical channels are available in the 8 possible mapping options (on both carrier drawers). An additional channel (4) is available on the IDC (PPPoE)).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnAgnInBandMngXChannelEntry  

gnAgnInBandMngXChannelId 1.3.6.1.4.1.2281.2.2.9.17.1.1
The channel Id
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER channel1(1), channel2(2), channel3(3), channel4(4)  

gnAgnInBandMngXChannelIfIndex 1.3.6.1.4.1.2281.2.2.9.17.1.2
The ifIndex of the interface that is mapped to this channel
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnAgnInBandMngXChannelType 1.3.6.1.4.1.2281.2.2.9.17.1.3
The type of channel the in-band-management goes over. Default value for channels 1 and 3 in the carrier drawers is Proprietary. Channel 2 not allowed to be Proprietary. In protection the ch_type of ch#3 can not be modified Channel 4 must be PPPoE
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER proprietary(2), dccr(3), dccm(4), mediaspecific(5), pppoe(6)  

gnAgnInBandMngXChannelState 1.3.6.1.4.1.2281.2.2.9.17.1.4
Enable/Disable the in band channel
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnAgnInBandMngXChannelNeighborIP 1.3.6.1.4.1.2281.2.2.9.17.1.5
The PPP IP address of the gateway network element.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnAgnInBandMngXChannelStatus 1.3.6.1.4.1.2281.2.2.9.17.1.6
This MIB parameter defines the In-band PPP connection status. If the MIB value is up the PPP connection is up and running If the MIB value is down the PPP connection is down and is in initialization state. (Trying to establish a connection) If the MIB value is closed the PPP connection is down and is not trying open a connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(2), down(3), closed(4)  

gnAgnInBandMngXEnableInbandChannels 1.3.6.1.4.1.2281.2.2.9.18
This configuration enables/disables the in-band channels: 1-4. The LSB represent channel 1, the 2nd bit channel 2, etc. If a bit is on (1) it's channel is enabled. Example: if channels 2 & 4 are enabled and channels 1 & 3 are disabled, then the binary value is 1010, so the MIB value (decimal integer) will be 10.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

gnAgnInBandMngMainGNEInterface 1.3.6.1.4.1.2281.2.2.9.19
determines the primary GNE channel. Default means fixed channel prioritizing, in the following order (from first to last): Right Carrier Radio interface, [STM-1] Line interface on either Left or Right Carrier, Left Carrier Radio interface and PPPoE interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default(2), channel1(3), channel2(4), channel3(5), channel4(6)  

gnNeighborIP 1.3.6.1.4.1.2281.2.2.10
OBJECT IDENTIFIER    

gnNeighborInBandTable 1.3.6.1.4.1.2281.2.2.10.1
This table defines the IP addresses of the units that are connected Inband.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnNeighborInBandEntry

gnNeighborInBandEntry 1.3.6.1.4.1.2281.2.2.10.1.1
This is an entry in the IP addresses of the units that are connected Inband. This table contains a row for every interface which type is logically connected. for example regenerator which is connected in band has two neighbors: the first (index 1) the remote radio unit and the second the remote fiber neighbor (index 2).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnNeighborInBandEntry  

gnNeighborInBandIP 1.3.6.1.4.1.2281.2.2.10.1.1.1
The PPP IP address of the gateway network element.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnNeighborInBandStatus 1.3.6.1.4.1.2281.2.2.10.1.1.2
This MIB parameter defines the In-band PPP connection status. If the MIB value is up the PPP connection is up and running If the MIB value is down the PPP connection is down and is in initialization state. (Trying to establish a connection) If the MIB value is closed the PPP connection is down and is not trying open a connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(2), down(3), closed(4)  

gnNeighborMateIP 1.3.6.1.4.1.2281.2.2.10.2
The Protection Mate IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

gnNeighborRemoteRadioIP 1.3.6.1.4.1.2281.2.2.10.3
The IP address of the Radio Remote IDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

gnNeighborInBandXTable 1.3.6.1.4.1.2281.2.2.10.4
This table defines the IP addresses of the units that are connected Inband.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnNeighborInBandXEntry

gnNeighborInBandXEntry 1.3.6.1.4.1.2281.2.2.10.4.1
This is an entry in the IP addresses of the units that are connected Inband. This table contains a row for every interface which type is logically connected. for example regenerator which is connected in band has two neighbors: the first (index 1) the remote radio unit and the second the remote fiber neighbor (index 2).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnNeighborInBandXEntry  

gnNeighborInBandXId 1.3.6.1.4.1.2281.2.2.10.4.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnNeighborInBandXIP 1.3.6.1.4.1.2281.2.2.10.4.1.2
The PPP IP address of the gateway network element.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnNeighborIpTable 1.3.6.1.4.1.2281.2.2.10.5
This table shows the Neighbor IP for each STM connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnNeighborIpEntry

gnNeighborIpEntry 1.3.6.1.4.1.2281.2.2.10.5.1
.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnNeighborIpEntry  

gnNeighborIpDetectMode 1.3.6.1.4.1.2281.2.2.10.5.1.1
The Neighbor detect can be done automatically or to be manually insreted. Disable marks that the IP Detect is not used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(2), manual(3), auto(4)  

gnNeighborIpAddress 1.3.6.1.4.1.2281.2.2.10.5.1.2
The neighbor IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

gnNeighborIpRemoteIfIndex 1.3.6.1.4.1.2281.2.2.10.5.1.3
The If index of the neighbor IP address connected to the current If Index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnNeighborIpRemoteType 1.3.6.1.4.1.2281.2.2.10.5.1.4
The Type of the neighbor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER regenerator(1), access(2), adm(3), unit1500p(4), admline2line(5)  

gnAgnSNMPCfg 1.3.6.1.4.1.2281.2.2.11
OBJECT IDENTIFIER    

gnAgnSNMPCfgTrapCommunity 1.3.6.1.4.1.2281.2.2.11.1
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(12)  

gnAgnSNMPCfgReadCommunity 1.3.6.1.4.1.2281.2.2.11.2
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(12)  

gnAgnSNMPCfgWriteCommunity 1.3.6.1.4.1.2281.2.2.11.3
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(12)  

gnAgnPrvt 1.3.6.1.4.1.2281.2.2.12
OBJECT IDENTIFIER    

gnAgnPrvtCmd 1.3.6.1.4.1.2281.2.2.12.1
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), cNV(3), cNVBtr(4)  

gnAgnPrvtCmdStat 1.3.6.1.4.1.2281.2.2.12.2
.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(2), cNVPass(3), cNVFail(4), cNVBtrPass(5), cNVBtrFail(6)  

gnSoftwareDrawerVersionTable 1.3.6.1.4.1.2281.2.2.13
This table contains the IDU, MUX & ODU software versions; local and remote.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnSoftwareDrawerVersionEntry

gnSoftwareDrawerVersionEntry 1.3.6.1.4.1.2281.2.2.13.1
Entry containing the currently operating IDU, ODU and MUX software versions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnSoftwareDrawerVersionEntry  

gnSoftwareDrawerId 1.3.6.1.4.1.2281.2.2.13.1.1
The ID indicates which Drawer is involved in the specific row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnSoftwareDrawerVersionMUX 1.3.6.1.4.1.2281.2.2.13.1.2
This is the MUX software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareDrawerVersionMUXPostResetVersion 1.3.6.1.4.1.2281.2.2.13.1.3
This is the ODU software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareDrawerVersionODU 1.3.6.1.4.1.2281.2.2.13.1.4
This is the MUX post reset software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareDrawerVersionODUPostResetVersion 1.3.6.1.4.1.2281.2.2.13.1.5
This is the MUX post reset software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareDrawerVersionModemFile 1.3.6.1.4.1.2281.2.2.13.1.6
This is the Modem software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareDrawerVersionModemFilePostResetVersion 1.3.6.1.4.1.2281.2.2.13.1.7
This is the Modem post reset software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareDrawerVersionModemScript 1.3.6.1.4.1.2281.2.2.13.1.8
This is the Modem software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareDrawerVersionModemScriptPostResetVersion 1.3.6.1.4.1.2281.2.2.13.1.9
This is the Modem post reset software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnSoftwareDrawerVersionRfuFpgaVersion 1.3.6.1.4.1.2281.2.2.13.1.10
This is the Rfu Fpga software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnAgnCurrentAlarm 1.3.6.1.4.1.2281.2.2.14
OBJECT IDENTIFIER    

gnAgnCurrentAlarmLastChange 1.3.6.1.4.1.2281.2.2.14.1
This counter initialized with random number after resest, and incremented on each change in the gnAgnCurrentAlarmTable (either add or remove of an entery).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnCurrentAlarmTable 1.3.6.1.4.1.2281.2.2.14.2
This table includes the currently open alarm (when a RAISED trap is sent, an alarm is added to the table, when a CLEAR trap is sent, the alarm is removed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnAgnCurrentAlarmEntry

gnAgnCurrentAlarmEntry 1.3.6.1.4.1.2281.2.2.14.2.1
Entry containing the info of a currently RAISED trap.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnAgnCurrentAlarmEntry  

gnAgnCurrentAlarmCounter 1.3.6.1.4.1.2281.2.2.14.2.1.1
A running counter of open alarm, the counter is incremented on every new RAISED trap. It is cleared after reset. This counter is (optionaly) attached to each trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnCurrentAlarmSeverity 1.3.6.1.4.1.2281.2.2.14.2.1.2
The current Alarm severity
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER event(1), warning(3), minor(7), major(15), critical(31)  

gnAgnCurrentAlarmId 1.3.6.1.4.1.2281.2.2.14.2.1.3
Alarm Identifier (contains alarm type and interface). Same AlarmId for rasie and clear alarms.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnCurrentAlarmIfIndex 1.3.6.1.4.1.2281.2.2.14.2.1.4
Interface Index where the alarm occurred, alarms that are not associated with specific interface will have the following value: For IDC related alarms the value is: 65001 For drawer1 related alarms the value is: 65003 For drawer2 related alarms the value is: 65004 If Alarm's origin is bigger than 256, it will be 65000 + the origin
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnCurrentAlarmOrigin 1.3.6.1.4.1.2281.2.2.14.2.1.5
The origin drawer of the alarm (if applicable, otherwise it will be idc(2)).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER interfaces(1), idc(2), drawer1(3), drawer2(4), unKnown(5), tIdc1(257), tIdc2(258), tIdc3(259), tIdc4(260), tIdc5(261), tIdc6(262), tIdc7(263), tIdc8(264), tIdc9(265), tDrawer1(513), tDrawer2(514), tDrawer3(515), tDrawer4(516), tDrawer5(517), tDrawer6(518), tDrawer7(519), tDrawer8(520), tDrawer9(521), tDrawer10(522), tDrawer11(523), tDrawer12(524), tDrawer13(525), tDrawer14(526), tDrawer15(527), tXC1(769), tXC2(770), tXC3(771), tXC4(772), tXC5(773), tXC6(774)  

gnAgnCurrentAlarmUnit 1.3.6.1.4.1.2281.2.2.14.2.1.6
The unit of the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idc(2), odu(3), mux(4), modem(5), drawer(6), unKnown(7), xc(9)  

gnAgnCurrentAlarmTrapID 1.3.6.1.4.1.2281.2.2.14.2.1.7
The ID of the RAISED trap that was sent when this alarm was raised.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnCurrentAlarmTimeT 1.3.6.1.4.1.2281.2.2.14.2.1.8
Timestamp of this alarm, this number is the seconds from midnight 1.1.1970.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnAgnCurrentAlarmText 1.3.6.1.4.1.2281.2.2.14.2.1.9
The alarm display text (same as the text in the sent trap).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

gnNMS 1.3.6.1.4.1.2281.2.2.15
OBJECT IDENTIFIER    

gnApplicFileTable 1.3.6.1.4.1.2281.2.2.16
This table contains the application file list.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnApplicFileEntry

gnApplicFileEntry 1.3.6.1.4.1.2281.2.2.16.1
Entry containing the application file list.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnApplicFileEntry  

gnApplicFileId 1.3.6.1.4.1.2281.2.2.16.1.1
The ID indicates which device is involved in the specific row. The application file table includes two rows, one for the local radio and one for the remote radio.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnApplicFileName 1.3.6.1.4.1.2281.2.2.16.1.2
This is the application file name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

gnApplicFileVersion 1.3.6.1.4.1.2281.2.2.16.1.3
This is the application file version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

gnApplicFileCreateDate 1.3.6.1.4.1.2281.2.2.16.1.4
This parameter specifies the application file download date Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal). A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 07 c8 05 1a 0d 1e 0f 00 ( 1992 -5 -26,13:30:15 ) Note that if only local time is known, then timezone information (fields 8-10) is not present.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

gnApplicFileDownloadDate 1.3.6.1.4.1.2281.2.2.16.1.5
This parameter specifies the application file download date Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal). A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 07 c8 05 1a 0d 1e 0f 00 ( 1992 -5 -26,13:30:15 ) Note that if only local time is known, then timezone information (fields 8-10) is not present.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

gnApplicFileType 1.3.6.1.4.1.2281.2.2.16.1.6
This is the application file type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idc(1), mux(2), odu(3), modem(4), boot(5), modemConfig(6), wayside(7), bootRom(8), rfuFpga(9), rfuConfig(10), mrmcTable(11), xc(12), xcErrorgen(13), aAux(14), license(15), frameConfigTable(16)  

gnApplicFileSubType 1.3.6.1.4.1.2281.2.2.16.1.7
This is the application file sub type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnApplicFileFirmware 1.3.6.1.4.1.2281.2.2.16.1.8
This is the application file firmware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnApplicFileGeneralPurpose 1.3.6.1.4.1.2281.2.2.16.1.9
This is the application file General Purpose.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnApplicFileSize 1.3.6.1.4.1.2281.2.2.16.1.10
This is the application file size in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnApplicFileCompressed 1.3.6.1.4.1.2281.2.2.16.1.11
This is indicate the application file compress status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

gnApplicFileDssSupport 1.3.6.1.4.1.2281.2.2.16.1.12
This is indicate the application file DSS support.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

gnApplicFileCrcSupport 1.3.6.1.4.1.2281.2.2.16.1.13
This is indicate the application file CRC support.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

gnDiskCapacityData 1.3.6.1.4.1.2281.2.2.17
OBJECT IDENTIFIER    

gnDiskUsedspace 1.3.6.1.4.1.2281.2.2.17.1
The ID indicates Disk Used space.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnDiskFreespace 1.3.6.1.4.1.2281.2.2.17.2
The ID indicates Disk Free space.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnUnits 1.3.6.1.4.1.2281.3
OBJECT IDENTIFIER    

gnODU 1.3.6.1.4.1.2281.3.1
OBJECT IDENTIFIER    

gnOduCfgTable 1.3.6.1.4.1.2281.3.1.1
This table defines the configuration of the Outdoor part of the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduCfgEntry

gnOduCfgEntry 1.3.6.1.4.1.2281.3.1.1.1
This is an entry in the ODU Configuration Table. This table contains two rows, indexed by ifIndex= 1 for local ODU and ifIndex = 101 for remote ODU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduCfgEntry  

gnOduCfgTransmitterFrequency 1.3.6.1.4.1.2281.3.1.1.1.1
This parameter indicates the radio TX channel number. WRITE will change the LOCAL side only. Not all radios will support TX frequency change via channel numbers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..20  

gnOduCfgRLPerfMonThresh1 1.3.6.1.4.1.2281.3.1.1.1.2
When the Received Level (RL) exceeds this threshold a performance monitoring RL1 counter increments.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -75..-15  

gnOduCfgRLPerfMonThresh2 1.3.6.1.4.1.2281.3.1.1.1.3
When the Received Level (RL) exceeds this threshold a performance monitoring RL2 counter increments.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -75..-15  

gnOduCfgATPCStatus 1.3.6.1.4.1.2281.3.1.1.1.4
This parameter indicates if the ATPC option is enabled or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

gnOduCfgMUTEStatus 1.3.6.1.4.1.2281.3.1.1.1.5
This parameter indicates if transmitter will be in mute state. (Mute on -> don't transmit)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

gnOduCfgAntennaType 1.3.6.1.4.1.2281.3.1.1.1.6
This parameter indicates the size of the antenna used in the ODU. This attribute will not auto-detect the antenna size. It is used for the unfaded RSL calculation feature included in the element manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER oneFoot(2), twoFeet(3), threeFeet(4), fourFeet(5), sixFeet(6)  

gnOduCfgTransmitLevel 1.3.6.1.4.1.2281.3.1.1.1.7
This is the transmitter output power level of the signal transmitted by the radios, displayed in DBM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -50..30  

gnOduCfgRealTxFreqNumber 1.3.6.1.4.1.2281.3.1.1.1.8
Identifies the RF Tx frequency. For 6, 7 and 8 bands the Tx frequency resolution is in kHz, for other bands the resolution is in 10kHz. If the Tx frequency value is over 4000000 than the band is identified as 6, 7 or 8G band.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnOduCfgRealRxFreqNumber 1.3.6.1.4.1.2281.3.1.1.1.9
Identifies the RF Rx frequency. For 6, 7 and 8 bands the Rx frequency resolution is in kHz, for other bands the resolution is in 10kHz. If the Rx frequency value is over 4000000 than the band is identified as 6, 7 or 8G band.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnOduCfgMinTxFreqNumber 1.3.6.1.4.1.2281.3.1.1.1.10
This the Minimum TX frequency that the ODU can receive - Used by the management station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gnOduCfgMaxTxFreqNumber 1.3.6.1.4.1.2281.3.1.1.1.11
This the Maximum TX frequency that the ODU can receive - Used by the management station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gnOduCfgMaxTxLevel 1.3.6.1.4.1.2281.3.1.1.1.12
This is the theoretical maximum level that this ODU unit can transmit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..99  

gnOduCfgRefRsl 1.3.6.1.4.1.2281.3.1.1.1.13
This is the received level reference, applicable when utilizing ATPC mode; displayed in dBm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -70..-30  

gnOduCfgForceRmtMuteTx 1.3.6.1.4.1.2281.3.1.1.1.14
When on, this parameter force the transmitter to be in mute state. (Mute on -> don't transmit)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

gnOduCfgForceRmtMaxTx 1.3.6.1.4.1.2281.3.1.1.1.15
This parameter force the transmitter output power level of the signal transmitted by the radio.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -50..30  

gnOduCfgTLPerfMonThresh1 1.3.6.1.4.1.2281.3.1.1.1.16
When the Transmitted Level (TL) exceeds this threshold a performance monitoring TL1 counter increments.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -10..25  

gnOduCfgMinRxFreqNumber 1.3.6.1.4.1.2281.3.1.1.1.17
This the Minimum RX frequency that the ODU can receive - Used by the management station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduCfgMaxRxFreqNumber 1.3.6.1.4.1.2281.3.1.1.1.18
This the Maximum RX frequency that the ODU can receive - Used by the management station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduCfgOduLoopSupport 1.3.6.1.4.1.2281.3.1.1.1.19
Indication for loopback support by the connected ODU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notSupported(2), supported(3)  

gnOduCfgOduModel 1.3.6.1.4.1.2281.3.1.1.1.20
.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(2), v2(3), v1(4)  

gnOduCfgFreqPlanStandard 1.3.6.1.4.1.2281.3.1.1.1.21
For the NMS use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..45)  

gnOduCfgFreqDevider 1.3.6.1.4.1.2281.3.1.1.1.22
Indicates the number with which we should divide the MIB Freq value to get to the actual Freq (100 or 1000)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduStatusTable 1.3.6.1.4.1.2281.3.1.2
This table defines the status of the Outdoor unit of the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduStatusEntry

gnOduStatusEntry 1.3.6.1.4.1.2281.3.1.2.1
This is an entry in the ODU Status Table. This table contains two rows, indexed by ifIndex= 1 for local ODU and ifIndex = 101 for remote ODU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduStatusEntry  

gnOduStatusCelsiusTemp 1.3.6.1.4.1.2281.3.1.2.1.1
This is the temperature of the ODU in degrees Celsius.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -50..80  

gnOduStatusFahrenheitTemp 1.3.6.1.4.1.2281.3.1.2.1.2
This is the temperature of the ODU in degrees Fahrenheit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -58..176  

gnOduStatusTransmitLevel 1.3.6.1.4.1.2281.3.1.2.1.3
This is the transmit level of the signal transmitted by the radios transmitter, displayed in DBM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -99..30  

gnOduStatusReceiveLevel 1.3.6.1.4.1.2281.3.1.2.1.4
This is the receive level of the signal transmitted by the radios transmitter, displayed in DBM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -99..-15  

gnOduStatusSynthesizerVCOLock 1.3.6.1.4.1.2281.3.1.2.1.5
This octet represents the ODU status as follows (bit 1, LSB): bit 1 on = TX IF synthesizer bit 2 on = RX IF synthesizer bit 3 on = Xband synthesizer bit 4 on = History TX IF synthesizer bit 5 on = History RX IF synthesizer bit 6 on = History Xband synthesizer
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnOduStatusPowerSupply 1.3.6.1.4.1.2281.3.1.2.1.6
This octet represents the status of the power supplies of the ODU: bit 1 on = +5V faulty bit 2 on = +8V faulty bit 3 on = +12V faulty bit 4 on = -12V faulty.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnOduStatusClearLoopTimer 1.3.6.1.4.1.2281.3.1.2.1.7
This variable indicates the remaining time (in minutes) till the relevant odu loopback timer will be expired. when starting a loopback and the value of gnGenCfgClearLoopTimeout is x, the gnOduStatusClearLoopTimer will be also x, after one minute it will be x-1, etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1440  

gnOduMonitor 1.3.6.1.4.1.2281.3.1.3
OBJECT IDENTIFIER    

gnOduMonCurrTable 1.3.6.1.4.1.2281.3.1.3.1
This table defines/keeps the counters of the current 15 min interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduMonCurrEntry

gnOduMonCurrEntry 1.3.6.1.4.1.2281.3.1.3.1.1
This is an entry in the Current Interval Table. This table contains two rows, indexed by ifIndex= 1 for local ODU and ifIndex = 101 for remote ODU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduMonCurrEntry  

gnOduMonCurrMinRL 1.3.6.1.4.1.2281.3.1.3.1.1.1
The minimum received signal level (RL) in the current 15 minute interval. (in DBM)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrMaxRL 1.3.6.1.4.1.2281.3.1.3.1.1.2
The maximum received signal level (RL) in the current 15 minute interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrTLThresh1Exceed 1.3.6.1.4.1.2281.3.1.3.1.1.3
The number of seconds TL exceeded the TL1 threshold in the last 15 minutes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.3.1.1.4
The number of seconds RL exceeded the RL1 threshold in the last 15 minutes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.3.1.1.5
The number of seconds RL exceeded the RL2 threshold in the last 15 minutes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrDayMinRL 1.3.6.1.4.1.2281.3.1.3.1.1.6
The minimum Receive Level (in DBM). in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrDayMaxRL 1.3.6.1.4.1.2281.3.1.3.1.1.7
The maximum Receive Level (in DBM). in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrDayTLThresh1Exceed 1.3.6.1.4.1.2281.3.1.3.1.1.8
The number of seconds TL exceeded the TL1 threshold in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrDayRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.3.1.1.9
The number of seconds RL exceeded the RL1 threshold in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrDayRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.3.1.1.10
The number of seconds RL exceeded the RL2 threshold in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrMinTL 1.3.6.1.4.1.2281.3.1.3.1.1.11
The minimum transmitted signal level (TL) in the current 15 minute interval. (in DBM)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrMaxTL 1.3.6.1.4.1.2281.3.1.3.1.1.12
The maximum transmitted signal level (TL) in the current 15 minute interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrDayMinTL 1.3.6.1.4.1.2281.3.1.3.1.1.13
The minimum Transmitted Level (in DBM). in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrDayMaxTL 1.3.6.1.4.1.2281.3.1.3.1.1.14
The maximum Transmitted Level (in DBM). in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalTable 1.3.6.1.4.1.2281.3.1.3.2
This table defines/keeps the counters of the 96 last intervals of 15 min.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduMonIntervalEntry

gnOduMonIntervalEntry 1.3.6.1.4.1.2281.3.1.3.2.1
This is an entry in the Interval Table. This table is indexed by ifIndex= 1 for local ODU and ifIndex = 101 for remote ODU and by interval idx
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduMonIntervalEntry  

gnOduMonIntervalIdx 1.3.6.1.4.1.2281.3.1.3.2.1.1
The interval number to which this row is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

gnOduMonIntervalMinRL 1.3.6.1.4.1.2281.3.1.3.2.1.2
The minimum RL in a 15 minutes interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalMaxRL 1.3.6.1.4.1.2281.3.1.3.2.1.3
The maximum RL in a 15 minutes interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalTLThresh1Exceed 1.3.6.1.4.1.2281.3.1.3.2.1.4
The number of seconds TL exceeded the TL1 threshold in a 15 minutes interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonIntervalEvent 1.3.6.1.4.1.2281.3.1.3.2.1.5
Events bit 1 = CommDisc. bit 2 = CommCon bit 3 = ATPC2Max. bit 4 = ATPC2Norm. Included for future development, not currently supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnOduMonIntervalRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.3.2.1.6
The number of seconds RL exceeded the RL1 threshold in a 15 minutes interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonIntervalRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.3.2.1.7
The number of seconds RL exceeded the RL2 threshold in a 15 minutes interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonIntervalMinTL 1.3.6.1.4.1.2281.3.1.3.2.1.8
The minimum TL in a 15 minutes interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalMaxTL 1.3.6.1.4.1.2281.3.1.3.2.1.9
The maximum TL in a 15 minutes interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayTable 1.3.6.1.4.1.2281.3.1.3.3
This table defines/keeps the counters of 96 intervals of 15 min.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduMonDayEntry

gnOduMonDayEntry 1.3.6.1.4.1.2281.3.1.3.3.1
This is an entry in the Days Table. This table is indexed by ifIndex= 1 for local ODU and ifIndex = 101 for remote ODU and by day idx. gnOduMonDayIdx = 1 is one day from now, gnOduMonDayIdx = 2 is two days from now, and so on...
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduMonDayEntry  

gnOduMonDayIdx 1.3.6.1.4.1.2281.3.1.3.3.1.1
The interval number to which this row is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnOduMonDayMinRL 1.3.6.1.4.1.2281.3.1.3.3.1.2
The minimum Receive Level (in DBM). in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayMaxRL 1.3.6.1.4.1.2281.3.1.3.3.1.3
The maximum Receive Level (in DBM). in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayTLThresh1Exceed 1.3.6.1.4.1.2281.3.1.3.3.1.4
The number of seconds TL exceeded the TL1 threshold in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonDayRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.3.3.1.5
The number of seconds RL exceeded the RL1 threshold in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonDayRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.3.3.1.6
The number of seconds RL exceeded the RL2 threshold in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonDayMinTL 1.3.6.1.4.1.2281.3.1.3.3.1.7
The minimum Transmit Level (in DBM). in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayMaxTL 1.3.6.1.4.1.2281.3.1.3.3.1.8
The maximum Transmit Level (in DBM). in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduCfgXTable 1.3.6.1.4.1.2281.3.1.4
This table defines the configuration of the Outdoor part of the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduCfgXEntry

gnOduCfgXEntry 1.3.6.1.4.1.2281.3.1.4.1
This is an entry in the ODU Configuration Table. This table contains two rows, indexed by gnOduCfgXId= 3 for drawer1 ODU and gnOduCfgXId = 4 for drawer2 ODU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduCfgXEntry  

gnOduCfgXId 1.3.6.1.4.1.2281.3.1.4.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnOduCfgXTxFreqNumLocalRemote 1.3.6.1.4.1.2281.3.1.4.1.2
Indicates the radio transmit frequency, displayed in 1/100 MHz. WRITE changes the local and remote sides. Only for systems that support frequency configuration (Not channel).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnOduCfgXRLPerfMonThresh1 1.3.6.1.4.1.2281.3.1.4.1.3
When the Received Level (RL) exceeds this threshold a performance monitoring RL1 counter increments.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -75..-15  

gnOduCfgXRLPerfMonThresh2 1.3.6.1.4.1.2281.3.1.4.1.4
When the Received Level (RL) exceeds this threshold a performance monitoring RL2 counter increments.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -75..-15  

gnOduCfgXATPCStatus 1.3.6.1.4.1.2281.3.1.4.1.5
This parameter indicates if the ATPC option is enabled or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

gnOduCfgXMUTEStatus 1.3.6.1.4.1.2281.3.1.4.1.6
This parameter indicates if transmitter will be in mute state. (Mute on -> don't transmit)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

gnOduCfgXAntennaType 1.3.6.1.4.1.2281.3.1.4.1.7
This parameter indicates the size of the antenna used in the ODU. This attribute will not auto-detect the antenna size. It is used for the unfaded RSL calculation feature included in the element manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER oneFoot(2), twoFeet(3), threeFeet(4), fourFeet(5), sixFeet(6)  

gnOduCfgXTransmitLevel 1.3.6.1.4.1.2281.3.1.4.1.8
This is the transmitter output power level of the signal transmitted by the radios, displayed in DBM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -50..34  

gnOduCfgXRealTxFreqNumber 1.3.6.1.4.1.2281.3.1.4.1.9
Identifies the RF Tx frequency. For 6, 7 and 8 bands the Tx frequency resolution is in kHz, for other bands the resolution is in 10kHz. If the Tx frequency value is over 4000000 than the band is identified as 6, 7 or 8G band.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnOduCfgXRealRxFreqNumber 1.3.6.1.4.1.2281.3.1.4.1.10
Identifies the RF Rx frequency. For 6, 7 and 8 bands the Rx frequency resolution is in kHz, for other bands the resolution is in 10kHz. If the Rx frequency value is over 4000000 than the band is identified as 6, 7 or 8G band.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnOduCfgXMinTxFreqNumber 1.3.6.1.4.1.2281.3.1.4.1.11
This the Minimum TX frequency that the ODU can receive - Used by the management station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gnOduCfgXMaxTxFreqNumber 1.3.6.1.4.1.2281.3.1.4.1.12
This the Maximum TX frequency that the ODU can receive - Used by the management station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gnOduCfgXMaxTxLevel 1.3.6.1.4.1.2281.3.1.4.1.13
This is the theoretical maximum level that this ODU unit can transmit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..99  

gnOduCfgXRefRsl 1.3.6.1.4.1.2281.3.1.4.1.14
This is the received level reference, applicable when utilizing ATPC mode; displayed in dBm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -70..-30  

gnOduCfgXForceRmtMuteTx 1.3.6.1.4.1.2281.3.1.4.1.15
When on, this parameter force the transmitter to be in mute state. (Mute on -> don't transmit)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

gnOduCfgXForceRmtMaxTx 1.3.6.1.4.1.2281.3.1.4.1.16
This parameter force the transmitter output power level of the signal transmitted by the radio.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -50..30  

gnOduCfgXTLPerfMonThresh1 1.3.6.1.4.1.2281.3.1.4.1.17
When the Transmitted Level (TL) exceeds this threshold a performance monitoring TL1 counter increments.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -10..25  

gnOduCfgXOperation 1.3.6.1.4.1.2281.3.1.4.1.18
This parameter allows to perform ODU operations. (3) will SET all ODU default configurations. (4) will implement ODU reset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), setOduDefaultConf(3), resetODU(4), swResetODU(5)  

gnOduCfgXODUSerialNumber 1.3.6.1.4.1.2281.3.1.4.1.19
This is the ODU serial number - up to 20 characters
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

gnOduCfgXChannelBandwidth 1.3.6.1.4.1.2281.3.1.4.1.20
The TX channel bandwidth, displayed in 1/100 MHz. For example: An STM-1 ETSI TX channel bandwidth of 56MHz is displayed as the value 5600.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduCfgXMinRxFreqNumber 1.3.6.1.4.1.2281.3.1.4.1.21
This the Minimum RX frequency that the ODU can receive - Used by the management station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduCfgXMaxRxFreqNumber 1.3.6.1.4.1.2281.3.1.4.1.22
This the Maximum RX frequency that the ODU can receive - Used by the management station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduCfgXRxFreqNumLocalRemote 1.3.6.1.4.1.2281.3.1.4.1.23
Indicates the radio transmit frequency, displayed in 1/100 MHz. WRITE changes the local and remote sides. Only for systems that support frequency configuration (Not channel).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnOduCfgXOduLoopSupport 1.3.6.1.4.1.2281.3.1.4.1.24
Inidcation for loopback support by the connected ODU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notSupported(2), supported(3)  

gnOduCfgXOduModel 1.3.6.1.4.1.2281.3.1.4.1.25
.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(2), v2(3), v1(4), v3(5), v4(6), v5(7), v6(8), v7(9), v8(10), v9(11)  

gnOduCfgXFreqPlanStandard 1.3.6.1.4.1.2281.3.1.4.1.26
For the NMS use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

gnOduCfgXFreqDevider 1.3.6.1.4.1.2281.3.1.4.1.27
Indicates the number with which we should divide the MIB Freq value to get to the actual Freq (100 or 1000)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduCfgXLoopbackOption 1.3.6.1.4.1.2281.3.1.4.1.28
This parameter enable the user to activate an ODU loopback .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noloopback(2), interfaceInterLoop(3)  

gnOduCfgXxpicClockMode 1.3.6.1.4.1.2281.3.1.4.1.29
This is the status of the xpic clock mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER standAlone(2), masterClock(3), slaveClock(4)  

gnOduCfgXUnfadedReferenceRsl 1.3.6.1.4.1.2281.3.1.4.1.30
This is used for the unfaded RSL calculation feature included in the element manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -70..-15  

gnOduCfgXRfuMode 1.3.6.1.4.1.2281.3.1.4.1.31
The RX mode of operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER main(2), diversity(3), combined(4)  

gnOduCfgXRslRouteToConnector 1.3.6.1.4.1.2281.3.1.4.1.32
Choose the receive level signal for the RSL connector.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER main(2), diversity(3)  

gnOduCfgXDelayCalibrationOperation 1.3.6.1.4.1.2281.3.1.4.1.33
This parameter enables launching a delay calibration parameters calculation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(2), activate(3), error(4)  

gnOduCfgXDelayCalibrationValue 1.3.6.1.4.1.2281.3.1.4.1.34
This parameter indicates the delay calibration result and delay calibration override value. values are between -130 to 130.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -130..130  

gnOduCfgXDelayCalibrationWgType 1.3.6.1.4.1.2281.3.1.4.1.35
Delay Calibration WG Type For the NMS use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..45)  

gnOduCfgXOduLog 1.3.6.1.4.1.2281.3.1.4.1.36
This parameter enable the user to activate ODU log.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnOduCfgXOduLogPeriod 1.3.6.1.4.1.2281.3.1.4.1.37
This parameter enable the user to chose the log peroid (in sec).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..600  

gnOduCfgXXpiPerfMonThresh 1.3.6.1.4.1.2281.3.1.4.1.38
When the Received XPI beneath this threshold a performance monitoring XPI counter increments (future develope).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..30  

gnOduStatusXTable 1.3.6.1.4.1.2281.3.1.5
This table defines the status of the Outdoor unit of the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduStatusXEntry

gnOduStatusXEntry 1.3.6.1.4.1.2281.3.1.5.1
This is an entry in the ODU Status Table. This table contains two rows, indexed by gnOduStatusXId= 3 for drawer1 ODU and gnOduStatusXId = 4 for drawer2 ODU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduStatusXEntry  

gnOduStatusXId 1.3.6.1.4.1.2281.3.1.5.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnOduStatusXCelsiusTemp 1.3.6.1.4.1.2281.3.1.5.1.2
This is the temperature of the ODU in degrees Celsius.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -70..80  

gnOduStatusXFahrenheitTemp 1.3.6.1.4.1.2281.3.1.5.1.3
This is the temperature of the ODU in degrees Fahrenheit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -58..176  

gnOduStatusXTransmitLevel 1.3.6.1.4.1.2281.3.1.5.1.4
This is the transmit level of the signal transmitted by the radios transmitter, displayed in DBM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -99..34  

gnOduStatusXReceiveLevel 1.3.6.1.4.1.2281.3.1.5.1.5
This is the receive level of the signal transmitted by the radios transmitter, displayed in DBM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -99..-15  

gnOduStatusXSynthesizerVCOLock 1.3.6.1.4.1.2281.3.1.5.1.6
This octet represents the ODU status as follows (bit 1, LSB): bit 1 on = TX IF synthesizer bit 2 on = RX IF synthesizer bit 3 on = Xband synthesizer bit 4 on = History TX IF synthesizer bit 5 on = History RX IF synthesizer bit 6 on = History Xband synthesizer
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnOduStatusXPowerSupply 1.3.6.1.4.1.2281.3.1.5.1.7
This octet represents the status of the power supplies of the ODU: bit 1 on = +5V faulty bit 2 on = +8V faulty bit 3 on = +12V faulty bit 4 on = -12V faulty.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnOduStatusXIfcSupported 1.3.6.1.4.1.2281.3.1.5.1.8
Indication for IFC support.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

gnOduStatusXRslDiversity 1.3.6.1.4.1.2281.3.1.5.1.9
This is the receive level of the space diversity signal, displayed in DBM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -99..0  

gnOduStatusXRslCombined 1.3.6.1.4.1.2281.3.1.5.1.10
This is the receive level of the combined signal, displayed in DBM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -99..0  

gnOduStatusXRfuAddress 1.3.6.1.4.1.2281.3.1.5.1.11
The RFU Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

gnOduStatusXMinTransmitLevel 1.3.6.1.4.1.2281.3.1.5.1.12
This is the minimum transmit level of the signal transmitted by the radios transmitter, displayed in DBM.. (for RFU unit only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -50..34  

gnOduStatusXOduSWVer 1.3.6.1.4.1.2281.3.1.5.1.13
This is the ODU software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnOduStatusXOduSWPostVer 1.3.6.1.4.1.2281.3.1.5.1.14
This is the ODU post reset software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnOduStatusXRfuFwVer 1.3.6.1.4.1.2281.3.1.5.1.15
This is the RFU FW version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnOduStatusXValidIntervals 1.3.6.1.4.1.2281.3.1.5.1.16
The number of previous valid intervals for which valid data has been stored for the specific ODU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..96  

gnOduMonitorX 1.3.6.1.4.1.2281.3.1.6
OBJECT IDENTIFIER    

gnOduMonCurrXTable 1.3.6.1.4.1.2281.3.1.6.1
This table defines/keeps the counters of the current 15 min interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduMonCurrXEntry

gnOduMonCurrXEntry 1.3.6.1.4.1.2281.3.1.6.1.1
This is an entry in the Current Interval Table. This table contains two rows, indexed by gnOduMonCurrXId= 3 for drawer1 ODU and gnOduMonCurrXId = 4 for drawer2 ODU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduMonCurrXEntry  

gnOduMonCurrXId 1.3.6.1.4.1.2281.3.1.6.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnOduMonCurrXMinRL 1.3.6.1.4.1.2281.3.1.6.1.1.2
The minimum received signal level (RL) in the current 15 minute interval. (in DBM)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXMaxRL 1.3.6.1.4.1.2281.3.1.6.1.1.3
The maximum received signal level (RL) in the current 15 minute interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXTLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.1.1.4
The number of seconds TL exceeded the TL1 threshold in the last 15 minutes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrXRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.1.1.5
The number of seconds RL exceeded the RL1 threshold in the last 15 minutes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrXRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.6.1.1.6
The number of seconds RL exceeded the RL2 threshold in the last 15 minutes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrXDayMinRL 1.3.6.1.4.1.2281.3.1.6.1.1.7
The minimum Receive Level (in DBM). in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXDayMaxRL 1.3.6.1.4.1.2281.3.1.6.1.1.8
The maximum Receive Level (in DBM). in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXDayTLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.1.1.9
The number of seconds TL exceeded the TL1 threshold in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrXDayRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.1.1.10
The number of seconds RL exceeded the RL1 threshold in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrXDayRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.6.1.1.11
The number of seconds RL exceeded the RL2 threshold in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrXMinTL 1.3.6.1.4.1.2281.3.1.6.1.1.12
The minimum transmitted signal level (TL) in the current 15 minute interval. (in DBM)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXMaxTL 1.3.6.1.4.1.2281.3.1.6.1.1.13
The maximum transmitted signal level (TL) in the current 15 minute interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXDayMinTL 1.3.6.1.4.1.2281.3.1.6.1.1.14
The minimum Transmitted Level (in DBM). in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXDayMaxTL 1.3.6.1.4.1.2281.3.1.6.1.1.15
The maximum Transmitted Level (in DBM). in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXXpi 1.3.6.1.4.1.2281.3.1.6.1.1.16
The Current XPI level (in [DBM/100]). For [DBM] level divide by 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXMinXpi 1.3.6.1.4.1.2281.3.1.6.1.1.17
The minimum XPI Level (in [DBM/100]). in the last 15 minute (future develope). For [DBM] level divide by 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXMaxXpi 1.3.6.1.4.1.2281.3.1.6.1.1.18
The maximum XPI Level (in [DBM/100]). in the last 15 minute (future develope). For [DBM] level divide by 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXDayMinXpi 1.3.6.1.4.1.2281.3.1.6.1.1.19
The minimum XPI Level (in [DBM/100]). in the last 24 hours (future develope). For [DBM] level divide by 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXDayMaxXpi 1.3.6.1.4.1.2281.3.1.6.1.1.20
The maximum XPI Level (in [DBM/100]). in the last 24 hours (future develope). For [DBM] level divide by 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXXpiThreshExceed 1.3.6.1.4.1.2281.3.1.6.1.1.21
The number of seconds XPI beneath the XPI threshold in the last 15 minutes (future develope).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrXDayXpiThreshExceed 1.3.6.1.4.1.2281.3.1.6.1.1.22
The number of seconds XPI beneath the XPI threshold in the last 24 hours (future develope).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrXMse 1.3.6.1.4.1.2281.3.1.6.1.1.23
The Current MSE level (in [DBM/100]). For [DBM] level divide by 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrXLastDayIDF 1.3.6.1.4.1.2281.3.1.6.1.1.24
IDF = Invalid Data Flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnOduMonIntervalXTable 1.3.6.1.4.1.2281.3.1.6.2
This table defines/keeps the counters of the 96 last intervals of 15 min.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduMonIntervalXEntry

gnOduMonIntervalXEntry 1.3.6.1.4.1.2281.3.1.6.2.1
This is an entry in the Interval Table. This table is indexed by gnOduMonIntervalXId= 3 for drawer1 ODU and gnOduMonIntervalXId = 4 for drawer2 ODU and by interval idx
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduMonIntervalXEntry  

gnOduMonIntervalXId 1.3.6.1.4.1.2281.3.1.6.2.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnOduMonIntervalXIdx 1.3.6.1.4.1.2281.3.1.6.2.1.2
The interval number to which this row is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

gnOduMonIntervalXMinRL 1.3.6.1.4.1.2281.3.1.6.2.1.3
The minimum RL in a 15 minutes interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalXMaxRL 1.3.6.1.4.1.2281.3.1.6.2.1.4
The maximum RL in a 15 minutes interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalXTLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.2.1.5
The number of seconds TL exceeded the TL1 threshold in a 15 minutes interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonIntervalXEvent 1.3.6.1.4.1.2281.3.1.6.2.1.6
Events bit 1 = CommDisc. bit 2 = CommCon bit 3 = ATPC2Max. bit 4 = ATPC2Norm. Included for future development, not currently supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnOduMonIntervalXRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.2.1.7
The number of seconds RL exceeded the RL1 threshold in a 15 minutes interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonIntervalXRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.6.2.1.8
The number of seconds RL exceeded the RL2 threshold in a 15 minutes interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonIntervalXMinTL 1.3.6.1.4.1.2281.3.1.6.2.1.9
The minimum TL in a 15 minutes interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalXMaxTL 1.3.6.1.4.1.2281.3.1.6.2.1.10
The maximum TL in a 15 minutes interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalXMinXpi 1.3.6.1.4.1.2281.3.1.6.2.1.11
The minimum XPI level (in [DBM/100]) in a 15 minutes intervalin (future develope). For [DBM] level divide by 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalXMaxXpi 1.3.6.1.4.1.2281.3.1.6.2.1.12
The maximum XPI level (in [DBM/100]) in a 15 minutes interval (future develope). For [DBM] level divide by 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalXXpiThreshExceed 1.3.6.1.4.1.2281.3.1.6.2.1.13
The number of seconds XPI exceeded the XPI threshold in a 15 minutes interval (future develope).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonIntervalXIDF 1.3.6.1.4.1.2281.3.1.6.2.1.14
IDF = Invalid Data Flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnOduMonDayXTable 1.3.6.1.4.1.2281.3.1.6.3
This table defines/keeps the counters of 96 intervals of 15 min.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduMonDayXEntry

gnOduMonDayXEntry 1.3.6.1.4.1.2281.3.1.6.3.1
This is an entry in the Days Table. This table is indexed by gnOduMonDayXId= 3 for drawer1 ODU and gnOduMonDayXId = 4 for drawer2 ODU and by day idx. gnOduMonDayIdx = 1 is one day from now, gnOduMonDayIdx = 2 is two days from now, and so on...
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduMonDayXEntry  

gnOduMonDayXId 1.3.6.1.4.1.2281.3.1.6.3.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnOduMonDayXIdx 1.3.6.1.4.1.2281.3.1.6.3.1.2
The interval number to which this row is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnOduMonDayXMinRL 1.3.6.1.4.1.2281.3.1.6.3.1.3
The minimum Receive Level (in DBM). in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayXMaxRL 1.3.6.1.4.1.2281.3.1.6.3.1.4
The maximum Receive Level (in DBM). in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayXTLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.3.1.5
The number of seconds TL exceeded the TL1 threshold in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonDayXRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.3.1.6
The number of seconds RL exceeded the RL1 threshold in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonDayXRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.6.3.1.7
The number of seconds RL exceeded the RL2 threshold in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonDayXMinTL 1.3.6.1.4.1.2281.3.1.6.3.1.8
The minimum Transmit Level (in DBM). in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayXMaxTL 1.3.6.1.4.1.2281.3.1.6.3.1.9
The maximum Transmit Level (in DBM). in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayXMinXpi 1.3.6.1.4.1.2281.3.1.6.3.1.10
The minimum XPI Level (in [DBM/100]) in a 24 hour interval (future develope). For [DBM] level divide by 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayXMaxXpi 1.3.6.1.4.1.2281.3.1.6.3.1.11
The maximum XPI Level (in [DBM/100]) in a 24 hour interval (future develope). For [DBM] level divide by 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayXXpiThreshExceed 1.3.6.1.4.1.2281.3.1.6.3.1.12
The number of seconds XPI exceeded the XPI threshold in a 24 hour interval (future develope).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonDayXIDF 1.3.6.1.4.1.2281.3.1.6.3.1.13
IDF = Invalid Data Flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnOduMonCurrDiversityXTable 1.3.6.1.4.1.2281.3.1.6.4
This table defines/keeps the counters of the current 15 min interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduMonCurrDiversityXEntry

gnOduMonCurrDiversityXEntry 1.3.6.1.4.1.2281.3.1.6.4.1
This is an entry in the Current Interval Table. This table contains two rows, indexed by gnOduMonCurrCombinedXId= 3 for drawer1 ODU and gnOduMonCurrDiversityXId = 4 for drawer2 ODU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduMonCurrDiversityXEntry  

gnOduMonCurrDiversityXId 1.3.6.1.4.1.2281.3.1.6.4.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnOduMonCurrDiversityXMinRL 1.3.6.1.4.1.2281.3.1.6.4.1.2
The minimum received signal level (RL) in the current 15 minute interval. (in DBM)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrDiversityXMaxRL 1.3.6.1.4.1.2281.3.1.6.4.1.3
The maximum received signal level (RL) in the current 15 minute interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrDiversityXRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.4.1.4
The number of seconds RL exceeded the RL1 threshold in the last 15 minutes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrDiversityXRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.6.4.1.5
The number of seconds RL exceeded the RL2 threshold in the last 15 minutes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrDiversityXDayMinRL 1.3.6.1.4.1.2281.3.1.6.4.1.6
The minimum Receive Level (in DBM). in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrDiversityXDayMaxRL 1.3.6.1.4.1.2281.3.1.6.4.1.7
The maximum Receive Level (in DBM). in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrDiversityXDayRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.4.1.8
The number of seconds Diversity RL exceeded the RL1 threshold in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrDiversityXDayRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.6.4.1.9
The number of seconds Diversity RL exceeded the RL2 threshold in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalDiversityXTable 1.3.6.1.4.1.2281.3.1.6.5
This table defines/keeps the counters of the 96 last intervals of 15 min.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduMonIntervalDiversityXEntry

gnOduMonIntervalDiversityXEntry 1.3.6.1.4.1.2281.3.1.6.5.1
This is an entry in the Interval Table. This table is indexed by gnOduMonIntervalDiversityXId= 3 for drawer1 ODU and gnOduMonIntervalDiversityXId = 4 for drawer2 ODU and by interval idx
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduMonIntervalDiversityXEntry  

gnOduMonIntervalDiversityXId 1.3.6.1.4.1.2281.3.1.6.5.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnOduMonIntervalDiversityXIdx 1.3.6.1.4.1.2281.3.1.6.5.1.2
The interval number to which this row is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

gnOduMonIntervalDiversityXMinRL 1.3.6.1.4.1.2281.3.1.6.5.1.3
The minimum RL in a 15 minutes interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalDiversityXMaxRL 1.3.6.1.4.1.2281.3.1.6.5.1.4
The maximum RL in a 15 minutes interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalDiversityXRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.5.1.5
The number of seconds RL exceeded the RL1 threshold in a 15 minutes interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonIntervalDiversityXRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.6.5.1.6
The number of seconds RL exceeded the RL2 threshold in a 15 minutes interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonDayDiversityXTable 1.3.6.1.4.1.2281.3.1.6.6
This table defines/keeps the counters of 96 intervals of 15 min.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduMonDayDiversityXEntry

gnOduMonDayDiversityXEntry 1.3.6.1.4.1.2281.3.1.6.6.1
This is an entry in the Days Table. This table is indexed by gnOduMonDayDiversityXId= 3 for drawer1 ODU and gnOduMonDayDiversityXId = 4 for drawer2 ODU and by day idx. gnOduMonDayDiversityXIdx = 1 is one day from now, gnOduMonDayDiversityXIdx = 2 is two days from now, and so on...
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduMonDayDiversityXEntry  

gnOduMonDayDiversityXId 1.3.6.1.4.1.2281.3.1.6.6.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnOduMonDayDiversityXIdx 1.3.6.1.4.1.2281.3.1.6.6.1.2
The interval number to which this row is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnOduMonDayDiversityXMinRL 1.3.6.1.4.1.2281.3.1.6.6.1.3
The minimum Receive Level (in DBM). in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayDiversityXMaxRL 1.3.6.1.4.1.2281.3.1.6.6.1.4
The maximum Receive Level (in DBM). in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayDiversityXRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.6.1.5
The number of seconds RL exceeded the RL1 threshold in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonDayDiversityXRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.6.6.1.6
The number of seconds RL exceeded the RL2 threshold in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrCombinedXTable 1.3.6.1.4.1.2281.3.1.6.7
This table defines/keeps the counters of the current 15 min interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduMonCurrCombinedXEntry

gnOduMonCurrCombinedXEntry 1.3.6.1.4.1.2281.3.1.6.7.1
This is an entry in the Current Interval Table. This table contains two rows, indexed by gnOduMonCurrCombinedXId= 3 for drawer1 ODU and gnOduMonCurrCombinedXId = 4 for drawer2 ODU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduMonCurrCombinedXEntry  

gnOduMonCurrCombinedXId 1.3.6.1.4.1.2281.3.1.6.7.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnOduMonCurrCombinedXMinRL 1.3.6.1.4.1.2281.3.1.6.7.1.2
The minimum received signal level (RL) in the current 15 minute interval. (in DBM)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrCombinedXMaxRL 1.3.6.1.4.1.2281.3.1.6.7.1.3
The maximum received signal level (RL) in the current 15 minute interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrCombinedXRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.7.1.4
The number of seconds RL exceeded the RL1 threshold in the last 15 minutes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrCombinedXRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.6.7.1.5
The number of seconds RL exceeded the RL2 threshold in the last 15 minutes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonCurrCombinedXDayMinRL 1.3.6.1.4.1.2281.3.1.6.7.1.6
The minimum Receive Level (in DBM). in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrCombinedXDayMaxRL 1.3.6.1.4.1.2281.3.1.6.7.1.7
The maximum Receive Level (in DBM). in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrCombinedXDayRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.7.1.8
The number of seconds Combined RL exceeded the RL1 threshold in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonCurrCombinedXDayRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.6.7.1.9
The number of seconds Combined RL exceeded the RL2 threshold in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalCombinedXTable 1.3.6.1.4.1.2281.3.1.6.8
This table defines/keeps the counters of the 96 last intervals of 15 min.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduMonIntervalCombinedXEntry

gnOduMonIntervalCombinedXEntry 1.3.6.1.4.1.2281.3.1.6.8.1
This is an entry in the Interval Table. This table is indexed by gnOduMonIntervalCombinedXId= 3 for drawer1 ODU and gnOduMonIntervalCombinedXId = 4 for drawer2 ODU and by interval idx
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduMonIntervalCombinedXEntry  

gnOduMonIntervalCombinedXId 1.3.6.1.4.1.2281.3.1.6.8.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnOduMonIntervalCombinedXIdx 1.3.6.1.4.1.2281.3.1.6.8.1.2
The interval number to which this row is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

gnOduMonIntervalCombinedXMinRL 1.3.6.1.4.1.2281.3.1.6.8.1.3
The minimum RL in a 15 minutes interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalCombinedXMaxRL 1.3.6.1.4.1.2281.3.1.6.8.1.4
The maximum RL in a 15 minutes interval. (in DBM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonIntervalCombinedXRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.8.1.5
The number of seconds RL exceeded the RL1 threshold in a 15 minutes interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonIntervalCombinedXRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.6.8.1.6
The number of seconds RL exceeded the RL2 threshold in a 15 minutes interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonDayCombinedXTable 1.3.6.1.4.1.2281.3.1.6.9
This table defines/keeps the counters of 96 intervals of 15 min.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnOduMonDayCombinedXEntry

gnOduMonDayCombinedXEntry 1.3.6.1.4.1.2281.3.1.6.9.1
This is an entry in the Days Table. This table is indexed by gnOduMonDayDiversityXId= 3 for drawer1 ODU and gnOduMonDayCombinedXId = 4 for drawer2 ODU and by day idx. gnOduMonDayCombinedXIdx = 1 is one day from now, gnOduMonDayCombinedXIdx = 2 is two days from now, and so on...
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnOduMonDayCombinedXEntry  

gnOduMonDayCombinedXId 1.3.6.1.4.1.2281.3.1.6.9.1.1
.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnOduMonDayCombinedXIdx 1.3.6.1.4.1.2281.3.1.6.9.1.2
The interval number to which this row is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnOduMonDayCombinedXMinRL 1.3.6.1.4.1.2281.3.1.6.9.1.3
The minimum Receive Level (in DBM). in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayCombinedXMaxRL 1.3.6.1.4.1.2281.3.1.6.9.1.4
The maximum Receive Level (in DBM). in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnOduMonDayCombinedXRLThresh1Exceed 1.3.6.1.4.1.2281.3.1.6.9.1.5
The number of seconds RL exceeded the RL1 threshold in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnOduMonDayCombinedXRLThresh2Exceed 1.3.6.1.4.1.2281.3.1.6.9.1.6
The number of seconds RL exceeded the RL2 threshold in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnIDU 1.3.6.1.4.1.2281.3.2
OBJECT IDENTIFIER    

gnMdm 1.3.6.1.4.1.2281.3.2.1
OBJECT IDENTIFIER    

gnMdmStatTable 1.3.6.1.4.1.2281.3.2.1.2
This table maintains the status of the Indoor part of the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMdmStatEntry

gnMdmStatEntry 1.3.6.1.4.1.2281.3.2.1.2.1
This is an entry in the IDU Modem Configuration Table. This table contains two rows, indexed by ifIndex= 1 for local modem and ifIndex = 101 for remote modem.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMdmStatEntry  

gnMdmModStatus 1.3.6.1.4.1.2281.3.2.1.2.1.1
This parameters indicates a modem fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(2), modulatorFault(3)  

gnMdmDemodStatus 1.3.6.1.4.1.2281.3.2.1.2.1.2
This parameters indicates a demodem fault - For internal use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnMdmDefectBlocks 1.3.6.1.4.1.2281.3.2.1.2.1.3
The number of defected blocks that could not be corrected by the FEC
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnMdmBytesCorrected 1.3.6.1.4.1.2281.3.2.1.2.1.4
Number of bytes corrected by the FEC
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnMdmClearBC 1.3.6.1.4.1.2281.3.2.1.2.1.5
clears Defected Blocks, Defected Bytes and Blocks Corrected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(2), clear(3)  

gnMdmStatXTable 1.3.6.1.4.1.2281.3.2.1.3
This table maintains the status of the Indoor part of the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMdmStatXEntry

gnMdmStatXEntry 1.3.6.1.4.1.2281.3.2.1.3.1
This is an entry in the IDU Modem Configuration Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMdmStatXEntry  

gnMdmStatXId 1.3.6.1.4.1.2281.3.2.1.3.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER modem1(3), modem2(4)  

gnMdmStatXStandardOrg 1.3.6.1.4.1.2281.3.2.1.3.1.2
This parameter specifies which international standard is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER etsi(2), fcc(3), japan(4), lmds(5), cmds(6), australia(7), other(8)  

gnMdmStatXRemoteConnection 1.3.6.1.4.1.2281.3.2.1.3.1.3
Is the connection between the local manager and the remote manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER connected(2), disconnected(3)  

gnMdmStatXModemType 1.3.6.1.4.1.2281.3.2.1.3.1.4
This parameter specifies the modem qam.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

gnMdmStatXModemWorkTime 1.3.6.1.4.1.2281.3.2.1.3.1.5
The modem Work Time (hours).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnMdmStatXModemSerialNumber 1.3.6.1.4.1.2281.3.2.1.3.1.6
This is the modem serial number - up to 20 characters
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

gnMdmStatXModemFWVer 1.3.6.1.4.1.2281.3.2.1.3.1.7
This is the Modem firmware version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnMdmStatXModemFWPostVer 1.3.6.1.4.1.2281.3.2.1.3.1.8
This is the Modem post reset firmware version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnMdmStatXModemScriptVer 1.3.6.1.4.1.2281.3.2.1.3.1.9
This is the Modem script version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnMdmStatXModemScriptPostVer 1.3.6.1.4.1.2281.3.2.1.3.1.10
This is the Modem post reset script version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnMdmStatXIfLoopbackTimeOut 1.3.6.1.4.1.2281.3.2.1.3.1.11
This variable indicates the remaining time (in minutes) till the relevant loopback timer will be expired. when starting a loopback and the value of gnMdmStatXIfLoopbackTimeOut is x, the gnMdmStatXIfLoopbackTimeOut will be also x, after one minute it will be x-1, etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1440  

gnMdmStatXBoardType 1.3.6.1.4.1.2281.3.2.1.3.1.12
This parameter defines the type of the modem for NMS use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER v1(2), v2(3), v3(4)  

gnMdmStatXDefectedBlocks 1.3.6.1.4.1.2281.3.2.1.3.1.13
The number of defected blocks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnMdmStatXScriptType 1.3.6.1.4.1.2281.3.2.1.3.1.14
This parameter specifies the type of the script. v1 - Regular MRMC script. v2 - ACM MRMC script.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER v1(2), v2(3)  

gnMdmStatXAcmValidIntervals 1.3.6.1.4.1.2281.3.2.1.3.1.15
This value indicates the number of valid intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..96  

gnMdmStatXAcmSignalValid 1.3.6.1.4.1.2281.3.2.1.3.1.16
This value indicates whether the modem is lock in ACM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER valid(2), notValid(3)  

gnMdmStatXTxConstellation 1.3.6.1.4.1.2281.3.2.1.3.1.17
This value indicates the current Tx modem constellation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1024  

gnMdmStatXRxConstellation 1.3.6.1.4.1.2281.3.2.1.3.1.18
This value indicates the current Rx modem constellation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1024  

gnMdmCfgTable 1.3.6.1.4.1.2281.3.2.1.4
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMdmCfgEntry

gnMdmCfgEntry 1.3.6.1.4.1.2281.3.2.1.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMdmCfgEntry  

gnMdmCfgId 1.3.6.1.4.1.2281.3.2.1.4.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnMdmCfgDiversityMode 1.3.6.1.4.1.2281.3.2.1.4.1.2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnMdmCfgXTable 1.3.6.1.4.1.2281.3.2.1.5
This table defines the configuration of modem.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMdmCfgXEntry

gnMdmCfgXEntry 1.3.6.1.4.1.2281.3.2.1.5.1
This is an entry in the modem configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMdmCfgXEntry  

gnMdmCfgXId 1.3.6.1.4.1.2281.3.2.1.5.1.1
This value indicates which device is involved in the specific row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER modem1(3), modem2(4)  

gnMdmCfgXLatencyType 1.3.6.1.4.1.2281.3.2.1.5.1.2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER low(2), high(3)  

gnMdmCfgXLinkId 1.3.6.1.4.1.2281.3.2.1.5.1.3
0 for 'old' system that doesn't support the link ID. the user can enter values from 1 to 65535
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

gnMdmCfgXRadioSide 1.3.6.1.4.1.2281.3.2.1.5.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER east(2), west(3)  

gnMdmCfgXMrmcConf 1.3.6.1.4.1.2281.3.2.1.5.1.5
The Link data capacity
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mrmc1528(1), mrmc1550(2), mrmc3156(3), mrmc3150(4), mrmc1228(5), mrmc1540(6), mrmc4410(7), mrmc4420(8), mrmc4440(9), mrmc1125(10), mrmc2050(11), mrmc2030(12), mrmc1340(13), mrmc3756(18), acm56(24), acm50(25), acm28(26)  

gnMdmCfgXIfLoopback 1.3.6.1.4.1.2281.3.2.1.5.1.6
This parameter enable the user to activate a loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(2), active(3)  

gnMdmCfgXHwReset 1.3.6.1.4.1.2281.3.2.1.5.1.7
hwReset - Hardware reset for modem board.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), hwReset(3)  

gnMdmCfgXPrbsTest 1.3.6.1.4.1.2281.3.2.1.5.1.8
This parameter enable the user to activate the PRBS test.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notActive(2), active(3)  

gnMdmCfgXClearCounters 1.3.6.1.4.1.2281.3.2.1.5.1.9
This parameter enable the user to clear the PRBS counters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(2), clearCounters(3)  

gnMdmCfgXAcmOperationMode 1.3.6.1.4.1.2281.3.2.1.5.1.10
This parameter set the administrative status of the ACM operational mode, this mode is valid on ACM script only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER adaptive(1), acm4QAM(2), acm8QAM(3), acm16QAM(4), acm32QAM(5), acm64QAM(6), acm128QAM(7), acm256QAM(8)  

gnMdmCfgXAcmMaximumConstellation 1.3.6.1.4.1.2281.3.2.1.5.1.11
This parameter set the maximum constellation of the ACM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER acm4QAM(2), acm8QAM(3), acm16QAM(4), acm32QAM(5), acm64QAM(6), acm128QAM(7), acm256QAM(8)  

gnMdmAcmStatXTable 1.3.6.1.4.1.2281.3.2.1.6
This table defines the ACM status.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMdmAcmStatXEntry

gnMdmAcmStatXEntry 1.3.6.1.4.1.2281.3.2.1.6.1
This is an entry in the modem ACM status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMdmAcmStatXEntry  

gnMdmAcmStatXId 1.3.6.1.4.1.2281.3.2.1.6.1.1
This value indicates which device is involved in the specific row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER modem1(3), modem2(4)  

gnMdmAcmStatXQamId 1.3.6.1.4.1.2281.3.2.1.6.1.2
This value indicates which QAM is involved in a specific row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER acm4QAM(2), acm8QAM(3), acm16QAM(4), acm32QAM(5), acm64QAM(6), acm128QAM(7), acm256QAM(8)  

gnMdmAcmStatXRoundedThroughput 1.3.6.1.4.1.2281.3.2.1.6.1.3
This value indicates on the rounded throuphput of a specific constellation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1000  

gnMdmAcmStatXSupportedThroughput 1.3.6.1.4.1.2281.3.2.1.6.1.4
This value indicates whether the specific constellation is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notSupport(2), support(3)  

gnMdmMonitorX 1.3.6.1.4.1.2281.3.2.1.7
OBJECT IDENTIFIER    

gnMdmAcmMonitorX 1.3.6.1.4.1.2281.3.2.1.7.1
OBJECT IDENTIFIER    

gnMdmAcmMonCurrXTable 1.3.6.1.4.1.2281.3.2.1.7.1.1
This table defines/keeps the counters of the current 15 min interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMdmAcmMonCurrXEntry

gnMdmAcmMonCurrXEntry 1.3.6.1.4.1.2281.3.2.1.7.1.1.1
This is an entry in the Current Interval Table. This table contains two rows, indexed by gnMdmAcmMonCurrXId= 3 for drawer1 modem and gnMdmAcmMonCurrXId = 4 for drawer2 modem.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMdmAcmMonCurrXEntry  

gnMdmAcmMonCurrXId 1.3.6.1.4.1.2281.3.2.1.7.1.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER modem1(3), modem2(4)  

gnMdmAcmMonCurrXMinConstellation 1.3.6.1.4.1.2281.3.2.1.7.1.1.1.2
The minimum modem constellation in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnMdmAcmMonCurrXMaxConstellation 1.3.6.1.4.1.2281.3.2.1.7.1.1.1.3
The maximum modem constellation in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnMdmAcmMonCurrXIDF 1.3.6.1.4.1.2281.3.2.1.7.1.1.1.4
IDF = Invalid Data Flag in current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnMdmAcmMonCurrXDayMinConstellation 1.3.6.1.4.1.2281.3.2.1.7.1.1.1.5
The minimum modem constellation in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnMdmAcmMonCurrXDayMaxConstellation 1.3.6.1.4.1.2281.3.2.1.7.1.1.1.6
The maximum modem constellation in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnMdmAcmMonCurrXDayIDF 1.3.6.1.4.1.2281.3.2.1.7.1.1.1.7
IDF = Invalid Data Flag in in the last 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnMdmAcmMonIntervalXTable 1.3.6.1.4.1.2281.3.2.1.7.1.2
This table defines/keeps the counters of the 96 last intervals of 15 min.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMdmAcmMonIntervalXEntry

gnMdmAcmMonIntervalXEntry 1.3.6.1.4.1.2281.3.2.1.7.1.2.1
This is an entry in the Interval Table. This table is indexed by gnMdmAcmMonIntervalXId= 3 for drawer1 modem and gnMdmAcmMonIntervalXId = 4 for drawer2 modem and by interval idx
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMdmAcmMonIntervalXEntry  

gnMdmAcmMonIntervalXId 1.3.6.1.4.1.2281.3.2.1.7.1.2.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER modem1(3), modem2(4)  

gnMdmAcmMonIntervalXIdx 1.3.6.1.4.1.2281.3.2.1.7.1.2.1.2
The interval number to which this row is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

gnMdmAcmMonIntervalXMinConstellation 1.3.6.1.4.1.2281.3.2.1.7.1.2.1.3
The minimum constellation in a 15 minutes interval
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnMdmAcmMonIntervalXMaxConstellation 1.3.6.1.4.1.2281.3.2.1.7.1.2.1.4
The maximum constellation in a 15 minutes interval
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnMdmAcmMonIntervalXIDF 1.3.6.1.4.1.2281.3.2.1.7.1.2.1.5
IDF = Invalid Data Flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnMdmAcmMonDayXTable 1.3.6.1.4.1.2281.3.2.1.7.1.3
This table defines/keeps the counters of 30 intervals of 24 hours.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMdmAcmMonDayXEntry

gnMdmAcmMonDayXEntry 1.3.6.1.4.1.2281.3.2.1.7.1.3.1
This is an entry in the Days Table. This table is indexed by gnMdmAcmMonDayXId= 3 for drawer1 modem and gnMdmAcmMonDayXId = 4 for drawer2 modem and by day idx. gnMdmAcmMonDayIdx = 1 is one day from now, gnMdmAcmMonDayIdx = 2 is two days from now, and so on...
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMdmAcmMonDayXEntry  

gnMdmAcmMonDayXId 1.3.6.1.4.1.2281.3.2.1.7.1.3.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER modem1(3), modem2(4)  

gnMdmAcmMonDayXIdx 1.3.6.1.4.1.2281.3.2.1.7.1.3.1.2
The interval number to which this row is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnMdmAcmMonDayXMinConstellation 1.3.6.1.4.1.2281.3.2.1.7.1.3.1.3
The minimum modem constellation in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnMdmAcmMonDayXMaxConstellation 1.3.6.1.4.1.2281.3.2.1.7.1.3.1.4
The maximum modem constellation in a 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnMdmAcmMonDayXIDF 1.3.6.1.4.1.2281.3.2.1.7.1.3.1.5
IDF = Invalid Data Flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnSpi 1.3.6.1.4.1.2281.3.2.2
OBJECT IDENTIFIER    

gnSpiCfgTable 1.3.6.1.4.1.2281.3.2.2.1
This table defines the configuration of the SPI part of the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnSpiCfgEntry

gnSpiCfgEntry 1.3.6.1.4.1.2281.3.2.2.1.1
This is an entry in the SPI Configuration Table. This table contains two rows, indexed by ifIndex= 2 for local SPI and ifIndex = 102 for remote SPI.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnSpiCfgEntry  

gnSpiCfgConnector 1.3.6.1.4.1.2281.3.2.2.1.1.1
The physical connector of the SPI - Used only in old regenerators
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nointerface(1), fiber(2), electrical(3), utp(4), stp(5)  

gnMux 1.3.6.1.4.1.2281.3.2.3
OBJECT IDENTIFIER    

gnRstCfgTable 1.3.6.1.4.1.2281.3.2.3.1
This table defines the configuration of the regenerator part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnRstCfgEntry

gnRstCfgEntry 1.3.6.1.4.1.2281.3.2.3.1.1
This is an entry in the Regenerator part of the MUX Configuration Table. This table contains a row for every interface which type is SONET(39). for example regenerator on local and remote sides will have four entries 1,2 for local IDU and 101 and 102 for remote IDU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnRstCfgEntry  

gnRstCfgTransmittedJ0 1.3.6.1.4.1.2281.3.2.3.1.1.1
This is the J0 string that would be sent. This string must be 15 characters in length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnRstCfgExpectedJ0 1.3.6.1.4.1.2281.3.2.3.1.1.2
This is the J0 string that is expected to be received. This string must be 15 characters in length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnRstCfgTransparencyJ0 1.3.6.1.4.1.2281.3.2.3.1.1.3
Send the received J0 string transparently or send the Transmitted J0 configured string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(2), passthrough(3), notActive(4)  

gnRstCfgRSTAISMode 1.3.6.1.4.1.2281.3.2.3.1.1.4
In the case of a J0 mismatch error, send or don't send AIS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sendAIS(2), doNotSendAIS(3)  

gnRstCfgRstEXCThresh 1.3.6.1.4.1.2281.3.2.3.1.1.5
If the bit error rate is higher than this threshold an EXC alarm would be generated. EXC is for excessive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4)  

gnRstCfgRstSDThresh 1.3.6.1.4.1.2281.3.2.3.1.1.6
If the bit error rate is higher than this threshold a SD alarm would be generated. SD is for Signal Degrade.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tenExpMinus6(3), tenExpMinus7(4), tenExpMinus8(5), tenExpMinus9(6)  

gnRstCfgTransparencyE1 1.3.6.1.4.1.2281.3.2.3.1.1.7
Transmit the order wire data received or terminate the E1 data received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(2), passthrough(3), disable(4)  

gnRstCfgTransparencyF1 1.3.6.1.4.1.2281.3.2.3.1.1.8
Transmit the F1/User channel data received or terminate the F1/User channel data received. set the TransparencyF1 to disable when the User channel used by In-Band management.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(2), passthrough(3), disable(4)  

gnRstCfgTransparencyUnscrambled 1.3.6.1.4.1.2281.3.2.3.1.1.9
Transmit the unscrambled national bytes data received or terminate the unscrambled national bytes data received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(2), passthrough(3)  

gnRstCfgMngByteLocation 1.3.6.1.4.1.2281.3.2.3.1.1.10
This parameter indicates which media specific bytes are in use and which are transparent. not currently supported
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mediaSpecificBytes(2), spareA1A0Bytes(3), e1Byets(4), noMngBytes(5), dccr(6), dccm(7), userChannel(8), waysideChannel(9)  

gnRstCfgE1waysideChannel 1.3.6.1.4.1.2281.3.2.3.1.1.11
If this parameter is enabled, an E1 wayside channel will be sent through the network using the unused bytes in the SDH header.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

gnRstCfgTransparencyDCCR 1.3.6.1.4.1.2281.3.2.3.1.1.12
Transmit on the DCCR channel or terminate the DCCR channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(2), passthrough(3)  

gnRstCfgTransparencyB1Chan 1.3.6.1.4.1.2281.3.2.3.1.1.13
Correct B1 byte or send transmit it transparently .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(2), passthrough(3)  

gnRstCfgTestActivate 1.3.6.1.4.1.2281.3.2.3.1.1.14
This field allows the NMS to activate the following tests: bit 1 = 1 Force AIS bit 2 = 1 Force RDI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnRstCfgLoopbackOption 1.3.6.1.4.1.2281.3.2.3.1.1.15
This parameter enable the user to activate a loopback .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noloopback(2), interfaceInterLoop(3), interfaceExterLoop(4)  

gnRstStatTable 1.3.6.1.4.1.2281.3.2.3.2
This table defines the status of the regenerator part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnRstStatEntry

gnRstStatEntry 1.3.6.1.4.1.2281.3.2.3.2.1
This is an entry in the Regenerator part of the MUX Status Table. This table contains a row for every interface which type is SONET(39).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnRstStatEntry  

gnRstStatReceivedJ0 1.3.6.1.4.1.2281.3.2.3.2.1.1
This is the J0 string received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnRstStatBERCur 1.3.6.1.4.1.2281.3.2.3.2.1.2
Current Bit Error Rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13)  

gnRstStatStatus 1.3.6.1.4.1.2281.3.2.3.2.1.3
bit 2 = LOS bit 3 = LOF bit 7 = TIM bit 9 = SD bit 10 = EXC bit 11 = UNEXP
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

gnRstStatClearLoopTimer 1.3.6.1.4.1.2281.3.2.3.2.1.4
This variable indicates the remaining time (in minutes) till the relevant loopback timer will be expired. when starting a loopback and the value of gnGenCfgClearLoopTimeout is x, the gnRstStatClearLoopTimer will be also x, after one minute it will be x-1, etc. gnRstStatClearLoopTimer.1 is for the radio aggregate loopbacks, gnRstStatClearLoopTimer.2 is for the line aggregate loopbacks
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1440  

gnRstMon 1.3.6.1.4.1.2281.3.2.3.3
OBJECT IDENTIFIER    

gnRstMonCurrTable 1.3.6.1.4.1.2281.3.2.3.3.1
This table maintains the counters of the regenerator part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnRstMonCurrEntry

gnRstMonCurrEntry 1.3.6.1.4.1.2281.3.2.3.3.1.1
This is an entry in the Regenerator part of the MUX Counters Table. This table contains a row for every interface which type is SONET(39).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnRstMonCurrEntry  

gnRstMonCurrBBE 1.3.6.1.4.1.2281.3.2.3.3.1.1.1
The current number of Background Block Errors starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonCurrUAS 1.3.6.1.4.1.2281.3.2.3.3.1.1.2
The current number of Unavailable Seconds starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonCurrLastDayES 1.3.6.1.4.1.2281.3.2.3.3.1.1.3
The current number of Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonCurrLastDaySES 1.3.6.1.4.1.2281.3.2.3.3.1.1.4
The current number of Severely Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonCurrLastDayBBE 1.3.6.1.4.1.2281.3.2.3.3.1.1.5
The current number of Background Block Errors starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonCurrLastDayUAS 1.3.6.1.4.1.2281.3.2.3.3.1.1.6
The current number of Unavailable Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonCurrLastDayOFS 1.3.6.1.4.1.2281.3.2.3.3.1.1.7
The current number of Out Of Frame Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonCurrLastDayIDF 1.3.6.1.4.1.2281.3.2.3.3.1.1.8
IDF = Invalid Data Flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnRstMonIntervalTable 1.3.6.1.4.1.2281.3.2.3.3.2
This table maintains the counters of the regenerator part of the MUX per interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnRstMonIntervalEntry

gnRstMonIntervalEntry 1.3.6.1.4.1.2281.3.2.3.3.2.1
This is an entry in the Regenerator part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnRstMonIntervalEntry  

gnRstMonIntervalIdx 1.3.6.1.4.1.2281.3.2.3.3.2.1.1
This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

gnRstMonIntervalBBE 1.3.6.1.4.1.2281.3.2.3.3.2.1.2
The number of Background Block Errors per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonIntervalUAS 1.3.6.1.4.1.2281.3.2.3.3.2.1.3
The number of Unavailable Seconds per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonIntervalIDF 1.3.6.1.4.1.2281.3.2.3.3.2.1.4
IDF = Invalid Data Flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnRstMonDayTable 1.3.6.1.4.1.2281.3.2.3.3.3
This table maintains the counters of the regenerator part of the MUX per 24 hours interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnRstMonDayEntry

gnRstMonDayEntry 1.3.6.1.4.1.2281.3.2.3.3.3.1
This is an entry in the Regenerator part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnRstMonDayEntry  

gnRstMonDayIdx 1.3.6.1.4.1.2281.3.2.3.3.3.1.1
This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnRstMonDayES 1.3.6.1.4.1.2281.3.2.3.3.3.1.2
The number of Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonDaySES 1.3.6.1.4.1.2281.3.2.3.3.3.1.3
The number of Severely Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonDayBBE 1.3.6.1.4.1.2281.3.2.3.3.3.1.4
The number of Background Block Errors per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonDayUAS 1.3.6.1.4.1.2281.3.2.3.3.3.1.5
The number of Unavailable Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonDayOFS 1.3.6.1.4.1.2281.3.2.3.3.3.1.6
The number of Out Of Frame Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnRstMonDayIDF 1.3.6.1.4.1.2281.3.2.3.3.3.1.7
IDF = Invalid Data Flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnMstCfgTable 1.3.6.1.4.1.2281.3.2.3.4
This table maintains the counters of the MST part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMstCfgEntry

gnMstCfgEntry 1.3.6.1.4.1.2281.3.2.3.4.1
This is an entry in the MST part of the MUX Configuration Table. This table contains a row for every interface which type is SONET(39).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMstCfgEntry  

gnMstCfgEXCThresh 1.3.6.1.4.1.2281.3.2.3.4.1.1
If the bit error rate is higher than this threshold an EXC alarm would be generated. EXC is for excessive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4)  

gnMstCfgSDThresh 1.3.6.1.4.1.2281.3.2.3.4.1.2
If the bit error rate is higher than this threshold a SD alarm would be generated. SD is for Signal Degrade.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tenExpMinus6(3), tenExpMinus7(4), tenExpMinus8(5), tenExpMinus9(6)  

gnMstStatTable 1.3.6.1.4.1.2281.3.2.3.5
This table defines the status of the MST part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMstStatEntry

gnMstStatEntry 1.3.6.1.4.1.2281.3.2.3.5.1
This is an entry in the MST part of the MUX Status Table. This table contains a row for every interface which type is SONET(39).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMstStatEntry  

gnMstStatReceivedS1 1.3.6.1.4.1.2281.3.2.3.5.1.1
Received Synchronization status byte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

gnMstStatStatus 1.3.6.1.4.1.2281.3.2.3.5.1.2
Alarm status. Bit 1 is MSB, bit=1 when alarm active. bit 5 = RDI bit 6 = AIS bit 9 = SD bit 10 = EXC bit 16 = PAM (MSP) bit 17 = SCM (MSP) bit 18 = INV (MSP)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

gnMstStatTransmitS1 1.3.6.1.4.1.2281.3.2.3.5.1.3
Transmitted Synchronization status byte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

gnMstStatCurrentBer 1.3.6.1.4.1.2281.3.2.3.5.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13)  

gnMstStatReceivedK1 1.3.6.1.4.1.2281.3.2.3.5.1.5
Received K1 byte (Automatic Protection Switch message).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

gnMstStatReceivedK2 1.3.6.1.4.1.2281.3.2.3.5.1.6
Received K2 byte (Automatic Protection Switch message).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

gnMstStatTransmitK1 1.3.6.1.4.1.2281.3.2.3.5.1.7
Transmitted K1 byte (Automatic Protection Switch message).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

gnMstStatTransmitK2 1.3.6.1.4.1.2281.3.2.3.5.1.8
Transmitted K2 byte (Automatic Protection Switch message).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

gnMstMon 1.3.6.1.4.1.2281.3.2.3.6
OBJECT IDENTIFIER    

gnMstMonCurrTable 1.3.6.1.4.1.2281.3.2.3.6.1
This table maintains the counters of the MST part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMstMonCurrEntry

gnMstMonCurrEntry 1.3.6.1.4.1.2281.3.2.3.6.1.1
This is an entry in the MST part of the MUX Counters Table. This table contains a row for every interface which type is SONET(39).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMstMonCurrEntry  

gnMstMonCurrBBE 1.3.6.1.4.1.2281.3.2.3.6.1.1.1
The current number of Background Block Errors starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstMonCurrUAS 1.3.6.1.4.1.2281.3.2.3.6.1.1.2
The current number of Unavailable Seconds starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstMonCurrLastDayES 1.3.6.1.4.1.2281.3.2.3.6.1.1.3
The current number of Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstMonCurrLastDaySES 1.3.6.1.4.1.2281.3.2.3.6.1.1.4
The current number of Severely Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstMonCurrLastDayBBE 1.3.6.1.4.1.2281.3.2.3.6.1.1.5
The current number of Background Block Errors starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstMonCurrLastDayUAS 1.3.6.1.4.1.2281.3.2.3.6.1.1.6
The current number of Unavailable Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstMonIntervalTable 1.3.6.1.4.1.2281.3.2.3.6.2
This table maintains the counters of the MST part of the MUX per interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMstMonIntervalEntry

gnMstMonIntervalEntry 1.3.6.1.4.1.2281.3.2.3.6.2.1
This is an entry in the MST part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMstMonIntervalEntry  

gnMstMonIntervalIdx 1.3.6.1.4.1.2281.3.2.3.6.2.1.1
This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

gnMstMonIntervalBBE 1.3.6.1.4.1.2281.3.2.3.6.2.1.2
The number of Background Block Errors per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstMonIntervalUAS 1.3.6.1.4.1.2281.3.2.3.6.2.1.3
The number of Unavailable Seconds per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstMonDayTable 1.3.6.1.4.1.2281.3.2.3.6.3
This table maintains the counters of the MST part of the MUX per 24 hours interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMstMonDayEntry

gnMstMonDayEntry 1.3.6.1.4.1.2281.3.2.3.6.3.1
This is an entry in the MST part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMstMonDayEntry  

gnMstMonDayIdx 1.3.6.1.4.1.2281.3.2.3.6.3.1.1
This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnMstMonDayES 1.3.6.1.4.1.2281.3.2.3.6.3.1.2
The number of Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstMonDaySES 1.3.6.1.4.1.2281.3.2.3.6.3.1.3
The number of Severely Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstMonDayBBE 1.3.6.1.4.1.2281.3.2.3.6.3.1.4
The number of Background Block Errors per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstMonDayUAS 1.3.6.1.4.1.2281.3.2.3.6.3.1.5
The number of Unavailable Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstFarEndMonCurrTable 1.3.6.1.4.1.2281.3.2.3.6.4
This table maintains the counters of the far end MST part of the MUX. This Table is not supported.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMstFarEndMonCurrEntry

gnMstFarEndMonCurrEntry 1.3.6.1.4.1.2281.3.2.3.6.4.1
This is an entry in the far end MST part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMstFarEndMonCurrEntry  

gnMstFarEndMonCurrBBE 1.3.6.1.4.1.2281.3.2.3.6.4.1.1
The current number of Background Block Errors starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstFarEndMonCurrUAS 1.3.6.1.4.1.2281.3.2.3.6.4.1.2
The current number of Unavailable Seconds starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstFarEndMonCurrLastDayES 1.3.6.1.4.1.2281.3.2.3.6.4.1.3
The current number of Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstFarEndMonCurrLastDaySES 1.3.6.1.4.1.2281.3.2.3.6.4.1.4
The current number of Severely Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstFarEndMonCurrLastDayBBE 1.3.6.1.4.1.2281.3.2.3.6.4.1.5
The current number of Background Block Errors starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstFarEndMonCurrLastDayUAS 1.3.6.1.4.1.2281.3.2.3.6.4.1.6
The current number of Unavailable Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstFarEndMonIntervalTable 1.3.6.1.4.1.2281.3.2.3.6.5
This table maintains the counters of the far end MST part of the MUX per interval. This Table is not supported.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMstFarEndMonIntervalEntry

gnMstFarEndMonIntervalEntry 1.3.6.1.4.1.2281.3.2.3.6.5.1
This is an entry in the far end MST part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39) This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMstFarEndMonIntervalEntry  

gnMstFarEndMonIntervalIdx 1.3.6.1.4.1.2281.3.2.3.6.5.1.1
This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

gnMstFarEndMonIntervalBBE 1.3.6.1.4.1.2281.3.2.3.6.5.1.2
The number of Background Block Errors per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstFarEndMonIntervalUAS 1.3.6.1.4.1.2281.3.2.3.6.5.1.3
The number of Unavailable Seconds per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstFarEndMonDayTable 1.3.6.1.4.1.2281.3.2.3.6.6
This table maintains the counters of the far end MST part of the MUX per 24 hours interval. This Table is not supported.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMstFarEndMonDayEntry

gnMstFarEndMonDayEntry 1.3.6.1.4.1.2281.3.2.3.6.6.1
This is an entry in the far end MST part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMstFarEndMonDayEntry  

gnMstFarEndMonDayIdx 1.3.6.1.4.1.2281.3.2.3.6.6.1.1
This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnMstFarEndMonDayES 1.3.6.1.4.1.2281.3.2.3.6.6.1.2
The number of Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstFarEndMonDaySES 1.3.6.1.4.1.2281.3.2.3.6.6.1.3
The number of Severely Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstFarEndMonDayBBE 1.3.6.1.4.1.2281.3.2.3.6.6.1.4
The number of Background Block Errors per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMstFarEndMonDayUAS 1.3.6.1.4.1.2281.3.2.3.6.6.1.5
The number of Unavailable Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptCfgTable 1.3.6.1.4.1.2281.3.2.3.7
This table maintains the counters of the HPT part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnHptCfgEntry

gnHptCfgEntry 1.3.6.1.4.1.2281.3.2.3.7.1
This is an entry in the HPT part of the MUX Configuration Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnHptCfgEntry  

gnHptCfgTransmittedJ1 1.3.6.1.4.1.2281.3.2.3.7.1.1
This is the J1 string that would be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnHptCfgExpectedJ1 1.3.6.1.4.1.2281.3.2.3.7.1.2
This is the J1 string that is expected to be received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnHptCfgMismatchJ1 1.3.6.1.4.1.2281.3.2.3.7.1.3
In case of a J1 mismatch error, send or don't send AIS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sendAlarm(2), sendAIS(3)  

gnHptCfgTransparencyJ1 1.3.6.1.4.1.2281.3.2.3.7.1.4
Send the received J1 string transparently or send the Transmitted J1 configured string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(2), passthrough(3), notActive(4)  

gnHptCfgEXCThresh 1.3.6.1.4.1.2281.3.2.3.7.1.5
If the bit error rate is higher than this threshold an EXC alarm would be generated. EXC is for excessive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4)  

gnHptCfgSDThresh 1.3.6.1.4.1.2281.3.2.3.7.1.6
If the bit error rate is higher than this threshold a SD alarm would be generated. SD is for Signal Degrade.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tenExpMinus6(3), tenExpMinus7(4), tenExpMinus8(5), tenExpMinus9(6)  

gnHptCfgTug3Structure1 1.3.6.1.4.1.2281.3.2.3.7.1.7
This field set the TUG-3 #1 structure: (hexadecimal number) the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG3 #1. (the K of the KLM index is 1) for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12 to be blocked (bit is 0) or unblocked (bit is 1). if it is VC3 only one more bit indicates if it is blocked (0) or unblocked (1). if a VC12 is set to blocked (this is the default) the system will send TU-AIS in that VC12. it it is unblocked it will be path-through or mapped to a E1/T1 port (according to the gnAccessCfgLowPathIndex). the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index), the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4. Example : SDH, VC12 strcture, blocked VCs: KLM=111,121 (M=1), 112,122 (M=2), 163,173 (M=3), unblocked VCs: all the other. the value in bits will be: 0011111 1111100 1111100 0000, and in Hexadecimal: 0x7FE7C0. (so enter: 00 7F E7 C0).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

gnHptCfgTug3Structure2 1.3.6.1.4.1.2281.3.2.3.7.1.8
This field set the TUG-3 #2 structure: (hexadecimal number) the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #2. (the K of the KLM index is 2) for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12 to be blocked (bit is 0) or unblocked (bit is 1). if it is VC3 only one more bit indicates if it is blocked (0) or unblocked (1). if a VC12 is set to blocked (this is the default) the system will send TU-AIS in that VC12. it it is unblocked it will be path-through or mapped to a E1/T1 port (according to the gnAccessCfgLowPathIndex). the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index), the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4. Example : SDH, VC12 strcture, blocked VCs: KLM=211,221 (M=1), 212,222 (M=2), 263,273 (M=3), unblocked VCs: all the other. the value in bits will be: 0011111 1111100 1111100 0000, and in Hexadecimal: 0x7FE7C0. (so enter: 00 7F E7 C0).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

gnHptCfgTug3Structure3 1.3.6.1.4.1.2281.3.2.3.7.1.9
This field set the TUG-3 #3 structure: (hexadecimal number) the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #3. (the K of the KLM index is 3) for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12 to be blocked (bit is 0) or unblocked (bit is 1). if it is VC3 only one more bit indicates if it is blocked (0) or unblocked (1). if a VC12 is set to blocked (this is the default) the system will send TU-AIS in that VC12. it it is unblocked it will be path-through or mapped to a E1/T1 port (according to the gnAccessCfgLowPathIndex). the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index), the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4. Example : SDH, VC12 strcture, blocked VCs: KLM=311,321 (M=1), 312,322 (M=2), 363,373 (M=3), unblocked VCs: all the other. the value in bits will be: 0011111 1111100 1111100 0000, and in Hexadecimal: 0x7FE7C0. (so enter: 00 7F E7 C0).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

gnHptCfgSignalLabelMismatch 1.3.6.1.4.1.2281.3.2.3.7.1.10
In case of a C2 mismatch error, send or don't send AIS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sendAlarm(2), sendAIS(3)  

gnHptCfgTrailPT1 1.3.6.1.4.1.2281.3.2.3.7.1.11
This field set the TUG-3 #1 Trails Pass Through (hexadecimal number) It used by the NMS to indicate that a trail is not 'ended' on this ADM, but it is the last in the configuration chain. the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #1. for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12 to be blocked (bit is 0) or unblocked (bit is 1). if it is VC3 only one more bit indicates if it is Pass-Through disabled (0, default) or Pass-Through enabled (1). if it is VC12, the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index), the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

gnHptCfgTrailPT2 1.3.6.1.4.1.2281.3.2.3.7.1.12
This field set the TUG-3 #2 Trails Pass Through (hexadecimal number). It used by the NMS to indicate that a trail is not 'ended' on this ADM, but it is the last in the configuration chain. the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #2. for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12 to be blocked (bit is 0) or unblocked (bit is 1). if it is VC3 only one more bit indicates if it is Pass-Through disabled (0, default) or Pass-Through enabled (1). if it is VC12, the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index), the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

gnHptCfgTrailPT3 1.3.6.1.4.1.2281.3.2.3.7.1.13
This field set the TUG-3 #3 Trails Pass Through (hexadecimal number) It used by the NMS to indicate that a trail is not 'ended' on this ADM, but it is the last in the configuration chain. the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #3. for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12 to be blocked (bit is 0) or unblocked (bit is 1). if it is VC3 only one more bit indicates if it is Pass-Through disabled (0, default) or Pass-Through enabled (1). if it is VC12, the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index), the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

gnHptStatTable 1.3.6.1.4.1.2281.3.2.3.8
This table defines the status of the HPT part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnHptStatEntry

gnHptStatEntry 1.3.6.1.4.1.2281.3.2.3.8.1
This is an entry in the HPT part of the MUX Status Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnHptStatEntry  

gnHptStatReceivedJ1 1.3.6.1.4.1.2281.3.2.3.8.1.1
This is the J1 string that was received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnHptStatStatus 1.3.6.1.4.1.2281.3.2.3.8.1.2
Alarm status byte. Bit 1 is MSB, bit=1 when alarm active. bit 4 = LOP bit 5 = RDI bit 6 = AIS bit 7 = TIM bit 8 = SLM/PLM bit 9 = SD bit 10 = EXC bit 12 = UNEQ bit 15 = LOM
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

gnHptStatCurrentBer 1.3.6.1.4.1.2281.3.2.3.8.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13)  

gnHptStatFarEndCurrentBer 1.3.6.1.4.1.2281.3.2.3.8.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13)  

gnHptStatReceivedSignalLabel 1.3.6.1.4.1.2281.3.2.3.8.1.5
This is the C2 string that was received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnHptMon 1.3.6.1.4.1.2281.3.2.3.9
OBJECT IDENTIFIER    

gnHptMonCurrTable 1.3.6.1.4.1.2281.3.2.3.9.1
This table maintains the counters of the HPT part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnHptMonCurrEntry

gnHptMonCurrEntry 1.3.6.1.4.1.2281.3.2.3.9.1.1
This is an entry in the HPT part of the MUX Counters Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnHptMonCurrEntry  

gnHptMonCurrBBE 1.3.6.1.4.1.2281.3.2.3.9.1.1.1
The current number of Background Block Errors starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptMonCurrUAS 1.3.6.1.4.1.2281.3.2.3.9.1.1.2
The current number of Unavailable Seconds starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptMonCurrLastDayES 1.3.6.1.4.1.2281.3.2.3.9.1.1.3
The current number of Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptMonCurrLastDaySES 1.3.6.1.4.1.2281.3.2.3.9.1.1.4
The current number of Severely Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptMonCurrLastDayBBE 1.3.6.1.4.1.2281.3.2.3.9.1.1.5
The current number of Background Block Errors starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptMonCurrLastDayUAS 1.3.6.1.4.1.2281.3.2.3.9.1.1.6
The current number of Unavailable Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptMonIntervalTable 1.3.6.1.4.1.2281.3.2.3.9.2
This table maintains the counters of the HPT part of the MUX per interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnHptMonIntervalEntry

gnHptMonIntervalEntry 1.3.6.1.4.1.2281.3.2.3.9.2.1
This is an entry in the HPT part of the MUX Counters Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnHptMonIntervalEntry  

gnHptMonIntervalIdx 1.3.6.1.4.1.2281.3.2.3.9.2.1.1
This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

gnHptMonIntervalBBE 1.3.6.1.4.1.2281.3.2.3.9.2.1.2
The number of Background Block Errors per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptMonIntervalUAS 1.3.6.1.4.1.2281.3.2.3.9.2.1.3
The number of Unavailable Seconds per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptMonDayTable 1.3.6.1.4.1.2281.3.2.3.9.3
This table maintains the counters of the HPT part of the MUX per 24 hours interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnHptMonDayEntry

gnHptMonDayEntry 1.3.6.1.4.1.2281.3.2.3.9.3.1
This is an entry in the HPT part of the MUX Counters Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnHptMonDayEntry  

gnHptMonDayIdx 1.3.6.1.4.1.2281.3.2.3.9.3.1.1
This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnHptMonDayES 1.3.6.1.4.1.2281.3.2.3.9.3.1.2
The number of Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptMonDaySES 1.3.6.1.4.1.2281.3.2.3.9.3.1.3
The number of Severely Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptMonDayBBE 1.3.6.1.4.1.2281.3.2.3.9.3.1.4
The number of Background Block Errors per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptMonDayUAS 1.3.6.1.4.1.2281.3.2.3.9.3.1.5
The number of Unavailable Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptFarEndMonCurrTable 1.3.6.1.4.1.2281.3.2.3.9.4
This table maintains the counters of the far end HPT part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnHptFarEndMonCurrEntry

gnHptFarEndMonCurrEntry 1.3.6.1.4.1.2281.3.2.3.9.4.1
This is an entry in the far end HPT part of the MUX Counters Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnHptFarEndMonCurrEntry  

gnHptFarEndMonCurrBBE 1.3.6.1.4.1.2281.3.2.3.9.4.1.1
The current number of Background Block Errors starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptFarEndMonCurrUAS 1.3.6.1.4.1.2281.3.2.3.9.4.1.2
The current number of Unavailable Seconds starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptFarEndMonCurrLastDayES 1.3.6.1.4.1.2281.3.2.3.9.4.1.3
The current number of Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptFarEndMonCurrLastDaySES 1.3.6.1.4.1.2281.3.2.3.9.4.1.4
The current number of Severely Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptFarEndMonCurrLastDayBBE 1.3.6.1.4.1.2281.3.2.3.9.4.1.5
The current number of Background Block Errors starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptFarEndMonCurrLastDayUAS 1.3.6.1.4.1.2281.3.2.3.9.4.1.6
The current number of Unavailable Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptFarEndMonIntervalTable 1.3.6.1.4.1.2281.3.2.3.9.5
This table maintains the counters of the far end HPT part of the MUX per interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnHptFarEndMonIntervalEntry

gnHptFarEndMonIntervalEntry 1.3.6.1.4.1.2281.3.2.3.9.5.1
This is an entry in the far end HPT part of the MUX Counters Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnHptFarEndMonIntervalEntry  

gnHptFarEndMonIntervalIdx 1.3.6.1.4.1.2281.3.2.3.9.5.1.1
This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

gnHptFarEndMonIntervalBBE 1.3.6.1.4.1.2281.3.2.3.9.5.1.2
The number of Background Block Errors per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptFarEndMonIntervalUAS 1.3.6.1.4.1.2281.3.2.3.9.5.1.3
The number of Unavailable Seconds per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptFarEndMonDayTable 1.3.6.1.4.1.2281.3.2.3.9.6
This table maintains the counters of the far end HPT part of the MUX per 24 hours interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnHptFarEndMonDayEntry

gnHptFarEndMonDayEntry 1.3.6.1.4.1.2281.3.2.3.9.6.1
This is an entry in the far end HPT part of the MUX Counters Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnHptFarEndMonDayEntry  

gnHptFarEndMonDayIdx 1.3.6.1.4.1.2281.3.2.3.9.6.1.1
This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnHptFarEndMonDayES 1.3.6.1.4.1.2281.3.2.3.9.6.1.2
The number of Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptFarEndMonDaySES 1.3.6.1.4.1.2281.3.2.3.9.6.1.3
The number of Severely Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptFarEndMonDayBBE 1.3.6.1.4.1.2281.3.2.3.9.6.1.4
The number of Background Block Errors per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnHptFarEndMonDayUAS 1.3.6.1.4.1.2281.3.2.3.9.6.1.5
The number of Unavailable Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptCfgTable 1.3.6.1.4.1.2281.3.2.3.10
This table maintains the counters of the LPT part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnLptCfgEntry

gnLptCfgEntry 1.3.6.1.4.1.2281.3.2.3.10.1
This is an entry in the LPT part of the MUX Configuration Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnLptCfgEntry  

gnLptCfgEXCThresh 1.3.6.1.4.1.2281.3.2.3.10.1.1
If the bit error rate is higher than this threshold an alarm would be generated. EXC is for excessive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4)  

gnLptCfgSDThresh 1.3.6.1.4.1.2281.3.2.3.10.1.2
If the bit error rate is higher than this threshold an alarm would be generated. SD is for Signal Degrade.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tenExpMinus6(3), tenExpMinus7(4), tenExpMinus8(5), tenExpMinus9(6), notActive(15)  

gnLptStatTable 1.3.6.1.4.1.2281.3.2.3.11
This table defines the status of the LPT part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnLptStatEntry

gnLptStatEntry 1.3.6.1.4.1.2281.3.2.3.11.1
This is an entry in the LPT part of the MUX Status Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnLptStatEntry  

gnLptStatReceivedJ2 1.3.6.1.4.1.2281.3.2.3.11.1.1
This is the J2 string that was received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnLptStatStatus 1.3.6.1.4.1.2281.3.2.3.11.1.2
Alarm status byte. Bit 1 is MSB, bit=1 when alarm active. bit 4 = LOP bit 5 = RDI bit 6 = AIS bit 7 = TIM bit 8 = SLM/PLM bit 9 = SD bit 10 = EXC bit 12 = UNEQ
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

gnLptStatProtectionMode 1.3.6.1.4.1.2281.3.2.3.11.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER working(2), protect(3), passthrough(4), notActive(5)  

gnLptStatCurrentBer 1.3.6.1.4.1.2281.3.2.3.11.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13)  

gnLptStatFarEndCurrentBer 1.3.6.1.4.1.2281.3.2.3.11.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13)  

gnLptStatReceivedSignalLabel 1.3.6.1.4.1.2281.3.2.3.11.1.6
These are bits 1..3 of the V5 string that was received (bit 0 is the lsb).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnLptStatKLM 1.3.6.1.4.1.2281.3.2.3.11.1.7
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnLptMon 1.3.6.1.4.1.2281.3.2.3.12
OBJECT IDENTIFIER    

gnLptMonCurrTable 1.3.6.1.4.1.2281.3.2.3.12.1
This table maintains the counters of the LPT part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnLptMonCurrEntry

gnLptMonCurrEntry 1.3.6.1.4.1.2281.3.2.3.12.1.1
This is an entry in the LPT part of the MUX Counters Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnLptMonCurrEntry  

gnLptMonCurrBBE 1.3.6.1.4.1.2281.3.2.3.12.1.1.1
The current number of Background Block Errors starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptMonCurrUAS 1.3.6.1.4.1.2281.3.2.3.12.1.1.2
The current number of Unavailable Seconds starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptMonCurrLastDayES 1.3.6.1.4.1.2281.3.2.3.12.1.1.3
The current number of Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptMonCurrLastDaySES 1.3.6.1.4.1.2281.3.2.3.12.1.1.4
The current number of Severely Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptMonCurrLastDayBBE 1.3.6.1.4.1.2281.3.2.3.12.1.1.5
The current number of Background Block Errors starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptMonCurrLastDayUAS 1.3.6.1.4.1.2281.3.2.3.12.1.1.6
The current number of Unavailable Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptMonIntervalTable 1.3.6.1.4.1.2281.3.2.3.12.2
This table maintains the counters of the LPT part of the MUX per interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnLptMonIntervalEntry

gnLptMonIntervalEntry 1.3.6.1.4.1.2281.3.2.3.12.2.1
This is an entry in the LPT part of the MUX Counters Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnLptMonIntervalEntry  

gnLptMonIntervalIdx 1.3.6.1.4.1.2281.3.2.3.12.2.1.1
This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

gnLptMonIntervalBBE 1.3.6.1.4.1.2281.3.2.3.12.2.1.2
The number of Background Block Errors per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptMonIntervalUAS 1.3.6.1.4.1.2281.3.2.3.12.2.1.3
The number of Unavailable Seconds per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptMonDayTable 1.3.6.1.4.1.2281.3.2.3.12.3
This table maintains the counters of the LPT part of the MUX per 24 hours interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnLptMonDayEntry

gnLptMonDayEntry 1.3.6.1.4.1.2281.3.2.3.12.3.1
This is an entry in the LPT part of the MUX Counters Table. This table contains four groups of rows, indexed by ifIndex= 1,2 for local IDU and ifIndex = 101 and 102 for remote IDU. This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnLptMonDayEntry  

gnLptMonDayIdx 1.3.6.1.4.1.2281.3.2.3.12.3.1.1
This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnLptMonDayES 1.3.6.1.4.1.2281.3.2.3.12.3.1.2
The number of Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptMonDaySES 1.3.6.1.4.1.2281.3.2.3.12.3.1.3
The number of Severely Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptMonDayBBE 1.3.6.1.4.1.2281.3.2.3.12.3.1.4
The number of Background Block Errors per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptMonDayUAS 1.3.6.1.4.1.2281.3.2.3.12.3.1.5
The number of Unavailable Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptFarEndMonCurrTable 1.3.6.1.4.1.2281.3.2.3.12.4
This table maintains the counters of the far end LPT part of the MUX.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnLptFarEndMonCurrEntry

gnLptFarEndMonCurrEntry 1.3.6.1.4.1.2281.3.2.3.12.4.1
This is an entry in the far end LPT part of the MUX Counters Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnLptFarEndMonCurrEntry  

gnLptFarEndMonCurrBBE 1.3.6.1.4.1.2281.3.2.3.12.4.1.1
The current number of Background Block Errors starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptFarEndMonCurrUAS 1.3.6.1.4.1.2281.3.2.3.12.4.1.2
The current number of Unavailable Seconds starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptFarEndMonCurrLastDayES 1.3.6.1.4.1.2281.3.2.3.12.4.1.3
The current number of Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptFarEndMonCurrLastDaySES 1.3.6.1.4.1.2281.3.2.3.12.4.1.4
The current number of Severely Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptFarEndMonCurrLastDayBBE 1.3.6.1.4.1.2281.3.2.3.12.4.1.5
The current number of Background Block Errors starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptFarEndMonCurrLastDayUAS 1.3.6.1.4.1.2281.3.2.3.12.4.1.6
The current number of Unavailable Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptFarEndMonIntervalTable 1.3.6.1.4.1.2281.3.2.3.12.5
This table maintains the counters of the far end LPT part of the MUX per interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnLptFarEndMonIntervalEntry

gnLptFarEndMonIntervalEntry 1.3.6.1.4.1.2281.3.2.3.12.5.1
This is an entry in the far end LPT part of the MUX Counters Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnLptFarEndMonIntervalEntry  

gnLptFarEndMonIntervalIdx 1.3.6.1.4.1.2281.3.2.3.12.5.1.1
This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

gnLptFarEndMonIntervalBBE 1.3.6.1.4.1.2281.3.2.3.12.5.1.2
The number of Background Block Errors per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptFarEndMonIntervalUAS 1.3.6.1.4.1.2281.3.2.3.12.5.1.3
The number of Unavailable Seconds per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptFarEndMonDayTable 1.3.6.1.4.1.2281.3.2.3.12.6
This table maintains the counters of the far end LPT part of the MUX per 24 hours interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnLptFarEndMonDayEntry

gnLptFarEndMonDayEntry 1.3.6.1.4.1.2281.3.2.3.12.6.1
This is an entry in the far end LPT part of the MUX Counters Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnLptFarEndMonDayEntry  

gnLptFarEndMonDayIdx 1.3.6.1.4.1.2281.3.2.3.12.6.1.1
This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnLptFarEndMonDayES 1.3.6.1.4.1.2281.3.2.3.12.6.1.2
The number of Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptFarEndMonDaySES 1.3.6.1.4.1.2281.3.2.3.12.6.1.3
The number of Severely Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptFarEndMonDayBBE 1.3.6.1.4.1.2281.3.2.3.12.6.1.4
The number of Background Block Errors per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnLptFarEndMonDayUAS 1.3.6.1.4.1.2281.3.2.3.12.6.1.5
The number of Unavailable Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnMuxCfgXTable 1.3.6.1.4.1.2281.3.2.3.13
This table defines the configuration of the mux board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMuxCfgXEntry

gnMuxCfgXEntry 1.3.6.1.4.1.2281.3.2.3.13.1
This is an entry in the mux configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMuxCfgXEntry  

gnMuxCfgXId 1.3.6.1.4.1.2281.3.2.3.13.1.1
This value indicates which device is involved in the specific row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER mux1(3), mux2(4)  

gnMuxCfgXWsAdmin 1.3.6.1.4.1.2281.3.2.3.13.1.2
Enable Disable drawer wayside channel
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnMuxCfgXWsLoopback 1.3.6.1.4.1.2281.3.2.3.13.1.3
This parameter controls the WAYSIDE channel loopback diagnostic operations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noloopback(2), waySideLoop(3)  

gnMuxCfgXHwReset 1.3.6.1.4.1.2281.3.2.3.13.1.4
hwReset - Hardware reset for mux board.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), hwReset(3)  

gnMUXCfgXTempLicenseEnable 1.3.6.1.4.1.2281.3.2.3.13.1.5
Set temporary license enable or disable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3), notSupported(4)  

gnMUXCfgXTempLicenseTimer 1.3.6.1.4.1.2281.3.2.3.13.1.6
This value indicates the temporary license timer
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gnMuxStatXTable 1.3.6.1.4.1.2281.3.2.3.14
This table defines the status of the mux board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnMuxStatXEntry

gnMuxStatXEntry 1.3.6.1.4.1.2281.3.2.3.14.1
This is an entry in the mux configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnMuxStatXEntry  

gnMuxStatXId 1.3.6.1.4.1.2281.3.2.3.14.1.1
This value indicates which device is involved in the specific row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER mux1(3), mux2(4)  

gnMuxStatXMuxSerialNumber 1.3.6.1.4.1.2281.3.2.3.14.1.2
This is the MUX serial number - up to 20 characters
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

gnMuxStatXIfLeds 1.3.6.1.4.1.2281.3.2.3.14.1.3
The status of the Interface LEDs. For the management station use. Each two bits represents one led as follows: 00 - Gray, 01 - Green, 10 - Orange, 11 - Red. The led order: Led1 is msb 2 bits , after it led2, till led 16 - 2 lsb bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

gnMuxStatXNumOfIfOnClass1 1.3.6.1.4.1.2281.3.2.3.14.1.4
This value indicates the actual number of interfaces on class 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gnMuxStatXNumOfIfOnClass2 1.3.6.1.4.1.2281.3.2.3.14.1.5
This value indicates the actual number of interfaces on class 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gnMuxStatXNumOfIfOnClass3 1.3.6.1.4.1.2281.3.2.3.14.1.6
This value indicates the actual number of interfaces on class 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gnMuxStatXAesAdmin 1.3.6.1.4.1.2281.3.2.3.14.1.7
This parameter defines encryption admin mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(2), disable(3), notSupport(4), systemFailure(5)  

gnMuxStatXMuxFWVer 1.3.6.1.4.1.2281.3.2.3.14.1.8
This is the Mux firmware version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnMuxStatXMuxFWPostVer 1.3.6.1.4.1.2281.3.2.3.14.1.9
This is the Mux post reset firmware version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnMuxStatXBoardConnector 1.3.6.1.4.1.2281.3.2.3.14.1.10
This parameter defines the connector of the mux board, for NMS use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noInterface(2), oneElectricalSTM1(3), oneFiberSTM1SingleMode(4), oneFiberSTM1MultiMode(5), twoElectricalSTM1(6), twoFiberSTM1SingleMode(7), twoFiberSTM1MultiMode(8), oneFEOnly(9), oneFEplus4E1(10), oneFEplus8E1(11), oneFEplus4T1(12), oneFEplus8T1(13), twoFEOnly(14), twoFEplus4E1(15), twoFEplus8E1(16), twoFEplus4T1(17), twoFEplus8T1(18), oneDS3(19), threeDS3(20), oneE3(21), threeE3(22), oneOpticalGBEOnly(23), oneOpticalGBEPlus8E1(24), oneOpticalGBEPlus8T1(25), oneElectricalGBEOnly(26), oneElectricalGBEPlus8E1(27), oneElectricalGBEPlus8T1(28), oneFEplus64E1(29), oneFEplus64T1(30), eightE1Only(31), eightT1Only(32), oneStm1XC(33), twoStm1XC(34)  

gnMuxStatXBoardType 1.3.6.1.4.1.2281.3.2.3.14.1.11
This parameter defines the type of the mux.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER v1(2), v2(3), v3(4), v4(5), v5(6), v6(7)  

gnAux 1.3.6.1.4.1.2281.3.2.4
OBJECT IDENTIFIER    

gnAuxGeneral 1.3.6.1.4.1.2281.3.2.4.1
OBJECT IDENTIFIER    

gnAuxGeneralTable 1.3.6.1.4.1.2281.3.2.4.1.1
This table defines the commands of the Auxiliary channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnAuxGeneralEntry

gnAuxGeneralEntry 1.3.6.1.4.1.2281.3.2.4.1.1.1
This is an entry in the Auxiliary channel command Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnAuxGeneralEntry  

gnAuxGeneralId 1.3.6.1.4.1.2281.3.2.4.1.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1)  

gnAuxGeneralSyncIdcDataBase 1.3.6.1.4.1.2281.3.2.4.1.1.1.2
This parameter synchronize between hardware and data base of auxiliary channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), auxToIdc(3), idcToAux(4)  

gnWsc 1.3.6.1.4.1.2281.3.2.4.2
OBJECT IDENTIFIER    

gnWscCfgTable 1.3.6.1.4.1.2281.3.2.4.2.1
This table defines the configuration of the Wayside channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnWscCfgEntry

gnWscCfgEntry 1.3.6.1.4.1.2281.3.2.4.2.1.1
This is an entry in the Wayside channel part of the AUX Configuration Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnWscCfgEntry  

gnWscCfgId 1.3.6.1.4.1.2281.3.2.4.2.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1)  

gnWscCfgChNumber 1.3.6.1.4.1.2281.3.2.4.2.1.1.2
Wayside channel number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER channel1(1), channel2(2)  

gnWscCfgRouting 1.3.6.1.4.1.2281.3.2.4.2.1.1.3
Wayside channel routing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER drawer1(2), drawer2(3)  

gnWscCfgEnable 1.3.6.1.4.1.2281.3.2.4.2.1.1.4
Wayside channel enable\disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnWscCfgBitRate 1.3.6.1.4.1.2281.3.2.4.2.1.1.5
Wayside channel bit rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER low(2), high(3)  

gnWscCfgType 1.3.6.1.4.1.2281.3.2.4.2.1.1.6
Wayside channel bit rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e1(2), t1(3), fastEthernet(4)  

gnWscStatTable 1.3.6.1.4.1.2281.3.2.4.2.2
This table defines the status of the Wayside channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnWscStatEntry

gnWscStatEntry 1.3.6.1.4.1.2281.3.2.4.2.2.1
This is an entry in the Wayside channel part of the AUX Status Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnWscStatEntry  

gnWscStatId 1.3.6.1.4.1.2281.3.2.4.2.2.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1)  

gnWscStatChNumber 1.3.6.1.4.1.2281.3.2.4.2.2.1.2
Wayside channel number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER channel1(1), channel2(2)  

gnWscStatBitRateSupport 1.3.6.1.4.1.2281.3.2.4.2.2.1.3
Indication for Wayside channel bit rate support.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER supported(2), notSupported(3)  

gnEow 1.3.6.1.4.1.2281.3.2.4.3
OBJECT IDENTIFIER    

gnEowCfgTable 1.3.6.1.4.1.2281.3.2.4.3.1
This table defines the configuration of the EOW.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnEowCfgEntry

gnEowCfgEntry 1.3.6.1.4.1.2281.3.2.4.3.1.1
This is an entry in the EOW configuration Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnEowCfgEntry  

gnEowCfgId 1.3.6.1.4.1.2281.3.2.4.3.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1)  

gnEowCfgEowLeftEnable 1.3.6.1.4.1.2281.3.2.4.3.1.1.2
EOW enable\disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnEowCfgEowRightEnable 1.3.6.1.4.1.2281.3.2.4.3.1.1.3
EOW enable\disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnEowCfgEowCascadeEnable 1.3.6.1.4.1.2281.3.2.4.3.1.1.4
EOW cascade enable\disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnEowStatTable 1.3.6.1.4.1.2281.3.2.4.3.2
This table defines the status of the EOW.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnEowStatEntry

gnEowStatEntry 1.3.6.1.4.1.2281.3.2.4.3.2.1
This is an entry in the EOW status Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnEowStatEntry  

gnEowStatId 1.3.6.1.4.1.2281.3.2.4.3.2.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1)  

gnEowStatEowLeftSupport 1.3.6.1.4.1.2281.3.2.4.3.2.1.2
Indication for EOW support.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER supported(2), notSupported(3)  

gnEowStatEowRightSupport 1.3.6.1.4.1.2281.3.2.4.3.2.1.3
Indication for EOW support.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER supported(2), notSupported(3)  

gnUc 1.3.6.1.4.1.2281.3.2.4.4
OBJECT IDENTIFIER    

gnUcCfgTable 1.3.6.1.4.1.2281.3.2.4.4.1
This table defines the configuration of the User channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnUcCfgEntry

gnUcCfgEntry 1.3.6.1.4.1.2281.3.2.4.4.1.1
This is an entry in the User channel part of the AUX Configuration Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnUcCfgEntry  

gnUcCfgId 1.3.6.1.4.1.2281.3.2.4.4.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1)  

gnUcCfgChNumber 1.3.6.1.4.1.2281.3.2.4.4.1.1.2
User channel number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER channel1(1), channel2(2)  

gnUcCfgRouting 1.3.6.1.4.1.2281.3.2.4.4.1.1.3
User channel routing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER drawer1(2), drawer2(3)  

gnUcCfgEnable 1.3.6.1.4.1.2281.3.2.4.4.1.1.4
User channel enable\disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnUcCfgType 1.3.6.1.4.1.2281.3.2.4.4.1.1.5
User channel protocol type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER v11Asyn(2), rs232(3), v11SynCoDirectional(4), v11SynContraDirectional(5), ethernet(6)  

gnUcCfgLoopback 1.3.6.1.4.1.2281.3.2.4.4.1.1.6
User channel loopback activation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(2), line(3)  

gnUcStatTable 1.3.6.1.4.1.2281.3.2.4.4.2
This table defines the status of the user channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnUcStatEntry

gnUcStatEntry 1.3.6.1.4.1.2281.3.2.4.4.2.1
This is an entry in the user channel status Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnUcStatEntry  

gnUcStatId 1.3.6.1.4.1.2281.3.2.4.4.2.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1)  

gnUcStatLeftMaxRouteChannel 1.3.6.1.4.1.2281.3.2.4.4.2.1.2
Indication for NMS on the number of channels the right radio can passthrough.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

gnUcStatRightMaxRouteChannel 1.3.6.1.4.1.2281.3.2.4.4.2.1.3
Indication for NMS on the number of channels the right radio can passthrough.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

gnProtect 1.3.6.1.4.1.2281.3.3
OBJECT IDENTIFIER    

gnProtectCfgTable 1.3.6.1.4.1.2281.3.3.1
This table contains protection switch configuration per device; local and remote.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnProtectCfgEntry

gnProtectCfgEntry 1.3.6.1.4.1.2281.3.3.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnProtectCfgEntry  

gnProtectCfgId 1.3.6.1.4.1.2281.3.3.1.1.1
This value indicates which device is involved in the specific row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

gnProtectCfgSwitchRequest 1.3.6.1.4.1.2281.3.3.1.1.2
Protection user switch request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(2), userSwitchRequest(3), userForceSwitch(4)  

gnProtectCfgBERSwitch 1.3.6.1.4.1.2281.3.3.1.1.3
Enable or disable automatic switch as a result of BER condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnProtectCfgExtInSwitch 1.3.6.1.4.1.2281.3.3.1.1.4
Enable or disable automatic switch as a result of alarm on External Input No. 8.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnProtectCfgOption 1.3.6.1.4.1.2281.3.3.1.1.5
bit 8 (lsb) = dual fiber input. bit 7 = protection disable bit 4 = 0 (default) for External protection ; 1 for Internal protection (between the drawers) bit 3 = 0 (default) for Full protection ; 1 for Radio protection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnProtectCfgUserCommand 1.3.6.1.4.1.2281.3.3.1.1.6
Copy All the configuration that should be equal in master and slave. The copy is made from the current unit to it's mate/Left drawer to right drawer or right drawer to left drawer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(2), copyConfToMate(3), copyLeftConfToRight(4), copyRightConfToLeft(5)  

gnProtectCfgType 1.3.6.1.4.1.2281.3.3.1.1.7
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(2), internal(3), external(4), externalInternal(5), multiRadioWithoutLineProtection(6), multiRadioWithLineProtection(7)  

gnProtectCfgProtectionLockout 1.3.6.1.4.1.2281.3.3.1.1.8
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

gnProtectCfgSdBERSwitch 1.3.6.1.4.1.2281.3.3.1.1.9
Enable or disable automatic switch as a result of signal degrade BER condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnProtectCfgMultiRadioBlock 1.3.6.1.4.1.2281.3.3.1.1.10
Block\un block radio in multi radio protection configuration only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unblock(2), blockLeft(3), blockRight(4), blockBoth(5)  

gnProtectUnitMode 1.3.6.1.4.1.2281.3.3.2
This parameter indicates the unit mode: Master of Slave.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER slave(2), master(3)  

gnHitLessCfgTable 1.3.6.1.4.1.2281.3.3.3
This table contains hitless configuration per device; local and remote.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnHitLessCfgEntry

gnHitLessCfgEntry 1.3.6.1.4.1.2281.3.3.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnHitLessCfgEntry  

gnHitLessCfgId 1.3.6.1.4.1.2281.3.3.3.1.1
This value indicates which device is involved in the specific row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2), drawer1(3), drawer2(4)  

gnHitLessCfgSwitchEnable 1.3.6.1.4.1.2281.3.3.3.1.2
Enable or disable the Hitless feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnHitLessCfgDiversityType 1.3.6.1.4.1.2281.3.3.3.1.3
Is the hitless feature working in space diversity mode or in frequency diversity mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER space(2), frequency(3), none(4)  

gnHitLessCfgSwitchingMode 1.3.6.1.4.1.2281.3.3.3.1.4
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER revertive(2), nonRevertive(3)  

gnHitLessCfgRevertTime 1.3.6.1.4.1.2281.3.3.3.1.5
This parameter indicates the revert time in seconds. Possible values: 0..15.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

gnHitLessCfgManualSwitch 1.3.6.1.4.1.2281.3.3.3.1.6
Force manually switch between the hitless modems.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(2), activate(3)  

gnHitLessCfgEventCounterCommand 1.3.6.1.4.1.2281.3.3.3.1.7
Clears the gnHitLessStatEventCounter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(2), clearCounter(3)  

gnHitLessCfgSwitchLock 1.3.6.1.4.1.2281.3.3.3.1.8
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(2), left(3), right(4), self(5), mate(6)  

gnHitLessStatTable 1.3.6.1.4.1.2281.3.3.4
This table contains hitless status per device; local and remote.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnHitLessStatEntry

gnHitLessStatEntry 1.3.6.1.4.1.2281.3.3.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnHitLessStatEntry  

gnHitLessStatId 1.3.6.1.4.1.2281.3.3.4.1.1
This value indicates which device is involved in the specific row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2), drawer1(3), drawer2(4)  

gnHitLessStatReceiverStatus 1.3.6.1.4.1.2281.3.3.4.1.2
This parameter indicates which Modem is active: the Local or the mate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(2), mate(3), leftRadio(4), rightRadio(5)  

gnHitLessStatModeStatus 1.3.6.1.4.1.2281.3.3.4.1.3
This parameter indicates if the Hitless system is working properly.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hitlessOK(2), hitlessFailure(3)  

gnHitLessStatEventCounter 1.3.6.1.4.1.2281.3.3.4.1.4
This counter counts the number of hitless switch events.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gnHitLessStatAlarmStatus 1.3.6.1.4.1.2281.3.3.4.1.5
bit 1 represent the MSB bits 1-7 are not in use bit 8 : Switch lock to right. bit 9 : Switch lock to left. bit 10: Protection config mismatch. bit 11: Diversity config mismatch. bit 12: Unused radio LOF. bit 13: Hitless Functionality Failure. bit 14: Hitless Cable Disconnect. bit 15: Hitless Mate LOF. bit 16: Hitless Primary Radio LOF.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

gnTribStmProtectCfg 1.3.6.1.4.1.2281.3.3.5
OBJECT IDENTIFIER    

gnTribStmProtectType 1.3.6.1.4.1.2281.3.3.5.1
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(2), msp(3), sncp(4)  

gnTribStmMspConnect 1.3.6.1.4.1.2281.3.3.5.2
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dualTribConnect(2), singleTribConnect(3)  

gnTribStmMspType 1.3.6.1.4.1.2281.3.3.5.3
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uniDirectional(2), biDirectional(3)  

gnTribStmMspRevertiveMode 1.3.6.1.4.1.2281.3.3.5.4
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nonRevertive(2), revertive(3)  

gnTribStmMspProtectRole 1.3.6.1.4.1.2281.3.3.5.5
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER main(2), standBy(3)  

gnTribStmMspWaitToRestoreTime 1.3.6.1.4.1.2281.3.3.5.6
This is the wait-to-restore time in minutes. Possible values: 5..12.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..12  

gnTribStmMspUserCommand 1.3.6.1.4.1.2281.3.3.5.7
.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER clear(2), lockOut(3), forceSwitch(4), manualSwitch(5), exercise(6)  

gnTribStmProtectStat 1.3.6.1.4.1.2281.3.3.6
OBJECT IDENTIFIER    

gnTribStmProtectCurrentState 1.3.6.1.4.1.2281.3.3.6.1
.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER working(2), protecting(3)  

gnTribStmProtectCableStatus 1.3.6.1.4.1.2281.3.3.6.2
.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(2), fault(3)  

gnProtectXTable 1.3.6.1.4.1.2281.3.3.7
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnProtectXEntry

gnProtectXEntry 1.3.6.1.4.1.2281.3.3.7.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnProtectXEntry  

gnProtectXId 1.3.6.1.4.1.2281.3.3.7.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnProtectXProtectUnitMode 1.3.6.1.4.1.2281.3.3.7.1.2
This parameter indicates the unit mode: Master of Slave.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER slave(2), master(3)  

gnProtectXMultiRadioOhRadioSource 1.3.6.1.4.1.2281.3.3.7.1.3
This parameter indicates the radio source of the OH in multi radio configuration merely.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER drawer1(3), drawer2(4)  

gnLinkGroups 1.3.6.1.4.1.2281.3.3.8
OBJECT IDENTIFIER    

topologiesOptionsTable 1.3.6.1.4.1.2281.3.3.8.1
This table indicates the Topologies options.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TopologiesOptionsEntry

topologiesOptionsEntry 1.3.6.1.4.1.2281.3.3.8.1.1
Entry containing the Topologies options.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TopologiesOptionsEntry  

topologiesOptionsGroupTopology 1.3.6.1.4.1.2281.3.3.8.1.1.1
This value indicates a bitmap : ---------------------------------------- | 15..12 | 11...........8 | 7........0 | | Set Id | Group Topology | Group Size | ---------------------------------------
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1  

topologiesOptionsMembersCarriers 1.3.6.1.4.1.2281.3.3.8.1.1.2
This value indicates a bitmap, LSB = carrier #1, #2.....
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1  

topologiesOptionsProtectingCarriers 1.3.6.1.4.1.2281.3.3.8.1.1.3
This value indicates a bitmap, LSB = carrier #1, #2.....
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1  

topologiesOptionsName 1.3.6.1.4.1.2281.3.3.8.1.1.4
This value indicates the name of the topology, HSB 1:1, Stand Alone, 2+1....
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

linkGroupingTable 1.3.6.1.4.1.2281.3.3.8.2
This table indicates the link grouping.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LinkGroupingEntry

linkGroupingEntry 1.3.6.1.4.1.2281.3.3.8.2.1
Entry containing the link grouping.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LinkGroupingEntry  

linkGroupingGroupId 1.3.6.1.4.1.2281.3.3.8.2.1.1
This value indicates the group id
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

linkGroupingGroupAdmin 1.3.6.1.4.1.2281.3.3.8.2.1.2
This value indicates the groups admin
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

linkGroupingGroupTopology 1.3.6.1.4.1.2281.3.3.8.2.1.3
This value indicates a bitmap : ---------------------------------------- | 15..12 | 11...........8 | 7........0 | | Set Id | Group Topology | Group Size | ---------------------------------------
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER topologyhsb1-1(1), topologystandalone(256), topology1plus1(513), topology2plus1(514), topology3plus1(515), topology4plus1(516), topology5plus1(517), topology6plus1(518), topology7plus1(519), topology8plus1(520), topology9plus1(521)  

linkGroupingExtraTrafficAdmin 1.3.6.1.4.1.2281.3.3.8.2.1.4
This value indicates the ET admin
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

linkGroupingGroupName 1.3.6.1.4.1.2281.3.3.8.2.1.5
This value indicates the groups name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

protectionTable 1.3.6.1.4.1.2281.3.3.8.3
This table indicates the link grouping protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ProtectionEntry

protectionEntry 1.3.6.1.4.1.2281.3.3.8.3.1
Entry containing the link grouping protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ProtectionEntry  

protectionGroupId 1.3.6.1.4.1.2281.3.3.8.3.1.1
This value indicates the group id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

protectionGroupsProtectionAdmin 1.3.6.1.4.1.2281.3.3.8.3.1.2
This value indicates the groups protection admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

protectionNplus1ProtectionMethod 1.3.6.1.4.1.2281.3.3.8.3.1.3
This value indicates the N+1 protection method.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER standard(2), advanced(3)  

protectionProtectingCarrierId 1.3.6.1.4.1.2281.3.3.8.3.1.4
This value indicates the carrier id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

standardProtectionTable 1.3.6.1.4.1.2281.3.3.8.4
This table indicates the link grouping standard protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StandardProtectionEntry

standardProtectionEntry 1.3.6.1.4.1.2281.3.3.8.4.1
Entry containing the link grouping standard protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  StandardProtectionEntry  

standardProtectionGroupId 1.3.6.1.4.1.2281.3.3.8.4.1.1
This value indicates the group id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

standardProtectionSwitchOnEarlyWarning 1.3.6.1.4.1.2281.3.3.8.4.1.2
This value indicates switch on early warning.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

standardProtectionHighPrioProtectionTh 1.3.6.1.4.1.2281.3.3.8.4.1.3
This value indicates the high priority protection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bblof(4), bbexb(5), bbsd(6), ew(7)  


standardProtectionRevertiveSwitchTimeOut 1.3.6.1.4.1.2281.3.3.8.4.1.5
This value indicates the revertive switch time out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

membersTable 1.3.6.1.4.1.2281.3.3.8.5
This table indicates the link groups members.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MembersEntry

membersEntry 1.3.6.1.4.1.2281.3.3.8.5.1
Entry containing the link groups members.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MembersEntry  

membersGroupId 1.3.6.1.4.1.2281.3.3.8.5.1.1
This value indicates the group id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

membersCarrierId 1.3.6.1.4.1.2281.3.3.8.5.1.2
This value indicates the carrier id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

membersProtectionPriorityLevel 1.3.6.1.4.1.2281.3.3.8.5.1.3
This value indicates the protection priority level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER void(2), normal(3), high(4)  

nplus1ProtectingTable 1.3.6.1.4.1.2281.3.3.8.6
This table indicates the link group N+1 protecting.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Nplus1ProtectingEntry

nplus1ProtectingEntry 1.3.6.1.4.1.2281.3.3.8.6.1
Entry containing the link group N+1 protecting.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Nplus1ProtectingEntry  

nplus1ProtectingGroupId 1.3.6.1.4.1.2281.3.3.8.6.1.1
This value indicates the group id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

nplus1ProtectingXCProtectionFraming 1.3.6.1.4.1.2281.3.3.8.6.1.2
This value indicates the XC protecting framing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(2), lof(3), noPeer(4), clear(5)  

nplus1ProtectingProtectedLinkTx 1.3.6.1.4.1.2281.3.3.8.6.1.3
This value indicates the last known carrier num. 0 means no carrier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

nplus1ProtectingProtectedLinkRx 1.3.6.1.4.1.2281.3.3.8.6.1.4
This value indicates the last known carrier num. 0 means no carrier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

nplus1ProtectingRequestedLinkTx 1.3.6.1.4.1.2281.3.3.8.6.1.5
This value indicates the last known carrier num. 0 means no carrier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

nplus1ProtectingRequestedLinkRx 1.3.6.1.4.1.2281.3.3.8.6.1.6
This value indicates the last known carrier num. 0 means no carrier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

nplus1ProtectingSwitchToProtectingCommand 1.3.6.1.4.1.2281.3.3.8.6.1.7
This value indicates the switch to protecting command. The force switch command is Bi-directional.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noaction(256), lockout(512), force1(769), force2(770), force3(771), force4(772), force5(773), force6(774), force7(775), force8(776), force9(777), force10(778), force11(779), force12(780), force13(781), force14(782), force15(783), request1(1025), request2(1026), request3(1027), request4(1028), request5(1029), request6(1030), request7(1031), request8(1032), request9(1033), request10(1034), request11(1035), request12(1036), request13(1037), request14(1038), request15(1039)  

carrierProtectionTable 1.3.6.1.4.1.2281.3.3.8.7
This table indicates the carrier protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CarrierProtectionEntry

carrierProtectionEntry 1.3.6.1.4.1.2281.3.3.8.7.1
Entry containing the carrier protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CarrierProtectionEntry  

carrierProtectionXCId 1.3.6.1.4.1.2281.3.3.8.7.1.1
This value indicates the XC id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

carrierProtectionCarrierId 1.3.6.1.4.1.2281.3.3.8.7.1.2
This value indicates the carrier id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

carrierProtectionLinkGroupNum 1.3.6.1.4.1.2281.3.3.8.7.1.3
This value indicates the link group number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER standalone(2), group1(3), group2(4), group3(5), group4(6)  

carrierProtectionServedByRemoteXC 1.3.6.1.4.1.2281.3.3.8.7.1.4
This value indicates whether served by remote XC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(2), yes(3), no(4)  

carrierProtectionRadioStatus 1.3.6.1.4.1.2281.3.3.8.7.1.5
This value indicates the radio status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(2), off(3), bblof(4), bbexb(5), bbsd(6), ew(7), clear(8)  

carrierProtectionLineFraming 1.3.6.1.4.1.2281.3.3.8.7.1.6
This value indicates the line framing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(2), lof(3), clear(4)  

carrierProtectionLoopback 1.3.6.1.4.1.2281.3.3.8.7.1.7
This value indicates the loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(3), external(4)  

carrierProtectionLoopbackTimer 1.3.6.1.4.1.2281.3.3.8.7.1.8
This variable indicates the remaining time (in minutes) till the loopback timer will be expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1440  

nplus1StandardPMCurrTable 1.3.6.1.4.1.2281.3.3.8.8
This table indicates the standard PM current.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Nplus1StandardPMCurrEntry

nplus1StandardPMCurrEntry 1.3.6.1.4.1.2281.3.3.8.8.1
Entry containing the standard PM current.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Nplus1StandardPMCurrEntry  

nplus1StandardPMCurrCarrierId 1.3.6.1.4.1.2281.3.3.8.8.1.1
This value indicates the carrier id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

nplus1StandardPMCurrTimeElapsed 1.3.6.1.4.1.2281.3.3.8.8.1.2
This value indicates the time that elapsed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..900  

nplus1StandardPMCurrValidIntervals 1.3.6.1.4.1.2281.3.3.8.8.1.3
This value indicates the valid intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

nplus1StandardPMCurrLastDayIDF 1.3.6.1.4.1.2281.3.3.8.8.1.4
This value indicates the carrier id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

nplus1StandardPMCurrLastDayGroupNum 1.3.6.1.4.1.2281.3.3.8.8.1.5
This value indicates the group's number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..4  

nplus1StandardPMCurrPSAC 1.3.6.1.4.1.2281.3.3.8.8.1.6
This value indicates the PSAC value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMCurrFSRC 1.3.6.1.4.1.2281.3.3.8.8.1.7
This value indicates the FSRC value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMCurrPSAD 1.3.6.1.4.1.2281.3.3.8.8.1.8
This value indicates the PSAD value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMCurrFSRD 1.3.6.1.4.1.2281.3.3.8.8.1.9
This value indicates the FSRD value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMCurrLastDayPSAC 1.3.6.1.4.1.2281.3.3.8.8.1.10
This value indicates the last Day PSAC value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMCurrLastDayFSRC 1.3.6.1.4.1.2281.3.3.8.8.1.11
This value indicates the last Day FSRC value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMCurrLastDayPSAD 1.3.6.1.4.1.2281.3.3.8.8.1.12
This value indicates the last Day PSAD value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMCurrLastDayFSRD 1.3.6.1.4.1.2281.3.3.8.8.1.13
This value indicates the last Day FSRD value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMIntervalTable 1.3.6.1.4.1.2281.3.3.8.9
This table indicates the standard PM interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Nplus1StandardPMIntervalEntry

nplus1StandardPMIntervalEntry 1.3.6.1.4.1.2281.3.3.8.9.1
Entry containing the standard PM interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Nplus1StandardPMIntervalEntry  

nplus1StandardPMIntervalCarrierId 1.3.6.1.4.1.2281.3.3.8.9.1.1
This value indicates the carrier id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

nplus1StandardPMIntervalIdx 1.3.6.1.4.1.2281.3.3.8.9.1.2
This value indicates the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

nplus1StandardPMIntervalIDF 1.3.6.1.4.1.2281.3.3.8.9.1.3
This value is an invalid data flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

nplus1StandardPMIntervalGroupNum 1.3.6.1.4.1.2281.3.3.8.9.1.4
This value indicates the group's number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..4  

nplus1StandardPMIntervalPSAC 1.3.6.1.4.1.2281.3.3.8.9.1.5
This value indicates the PSAC value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMIntervalFSRC 1.3.6.1.4.1.2281.3.3.8.9.1.6
This value indicates the FSRC value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMIntervalPSAD 1.3.6.1.4.1.2281.3.3.8.9.1.7
This value indicates the PSAD value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMIntervalFSRD 1.3.6.1.4.1.2281.3.3.8.9.1.8
This value indicates the FSRD value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMDayTable 1.3.6.1.4.1.2281.3.3.8.10
This table indicates the standard PM day table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Nplus1StandardPMDayEntry

nplus1StandardPMDayEntry 1.3.6.1.4.1.2281.3.3.8.10.1
Entry containing the standard PM day table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Nplus1StandardPMDayEntry  

nplus1StandardPMDayCarrierId 1.3.6.1.4.1.2281.3.3.8.10.1.1
This value indicates the carrier id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

nplus1StandardPMDayIdx 1.3.6.1.4.1.2281.3.3.8.10.1.2
This value indicates the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

nplus1StandardPMDayIDF 1.3.6.1.4.1.2281.3.3.8.10.1.3
This value is an invalid data flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

nplus1StandardPMDayGroupNum 1.3.6.1.4.1.2281.3.3.8.10.1.4
This value indicates the group's number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..4  

nplus1StandardPMDayPSAC 1.3.6.1.4.1.2281.3.3.8.10.1.5
This value indicates the PSAC value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMDayFSRC 1.3.6.1.4.1.2281.3.3.8.10.1.6
This value indicates the FSRC value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMDayPSAD 1.3.6.1.4.1.2281.3.3.8.10.1.7
This value indicates the PSAD value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nplus1StandardPMDayFSRD 1.3.6.1.4.1.2281.3.3.8.10.1.8
This value indicates the FSRD value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnSSM 1.3.6.1.4.1.2281.3.4
OBJECT IDENTIFIER    

gnSSMCfg 1.3.6.1.4.1.2281.3.4.1
OBJECT IDENTIFIER    

gnSSMCfgSSMMode 1.3.6.1.4.1.2281.3.4.1.1
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

gnSSMCfgPrimaryClockSource 1.3.6.1.4.1.2281.3.4.1.2
The primary clock source, configurable for ACCESS radios only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internalClock(2), external2MB(3), radioClock(4), fiberClock(5), external2MHz(6), external1AndHalfMB(7), tributaryClock1(8), tributaryClock2(9), tributaryClock3(10), tributaryClock4(11), tributaryClock5(12), tributaryClock6(13), tributaryClock7(14), tributaryClock8(15), tributaryClock9(16), tributaryClock10(17), tributaryClock11(18), tributaryClock12(19), tributaryClock13(20), tributaryClock14(21), tributaryClock15(22), tributaryClock16(23), tribSTM1(24)  

gnSSMCfgPrimaryClockQuality 1.3.6.1.4.1.2281.3.4.1.3
This parameter indicates the primary clock quality. Possible values for SDH: PRC(1), SSUT(2), SSUL(3), SEC(4), STU(5). Possible values for Sonet: PRS(1), STU(2), ST2(3), ST3(4), SMC(5), ST4(6).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..6  

gnSSMCfgSecondaryClockSource 1.3.6.1.4.1.2281.3.4.1.4
The secondary clock source, configurable for ACCESS radios only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internalClock(2), external2MB(3), radioClock(4), fiberClock(5), external2MHz(6), external1AndHalfMB(7), tributaryClock1(8), tributaryClock2(9), tributaryClock3(10), tributaryClock4(11), tributaryClock5(12), tributaryClock6(13), tributaryClock7(14), tributaryClock8(15), tributaryClock9(16), tributaryClock10(17), tributaryClock11(18), tributaryClock12(19), tributaryClock13(20), tributaryClock14(21), tributaryClock15(22), tributaryClock16(23), tribSTM1(24)  

gnSSMCfgSecondaryClockQuality 1.3.6.1.4.1.2281.3.4.1.5
This parameter indicates the secondary clock quality. Possible values for SDH: PRC(1), SSUT(2), SSUL(3), SEC(4), STU(5). Possible values for Sonet: PRS(1), STU(2), ST2(3), ST3(4), SMC(5), ST4(6).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..6  

gnSSMCfgClockUserCommand 1.3.6.1.4.1.2281.3.4.1.6
The clock user command. Switch is possible only when the SSM mode is disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(2), switchToPrimaryClock(3), switchToSecondaryClock(4), switchToInternalClock(5)  

gnSSMCfgClockOutputMute 1.3.6.1.4.1.2281.3.4.1.7
This parameter indicates if clock output will be in mute state. (Mute on -> don't transmit)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

gnSSMStat 1.3.6.1.4.1.2281.3.4.2
OBJECT IDENTIFIER    

gnSSMStatStatus 1.3.6.1.4.1.2281.3.4.2.1
Alarm status of SSM. Bit 1 is MSB, bit=1 when alarm active. bit 1 = Unlock bit 2 = Out Of Range bit 3 = Primary Clock Source Failure bit 4 = Secondary Clock Source Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

gnSSMStatCurrentClock 1.3.6.1.4.1.2281.3.4.2.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(2), secondary(3), internal(4), holdOver(5)  

gnSSMStatCurrentClockQuality 1.3.6.1.4.1.2281.3.4.2.3
This parameter indicates the current clock quality. SDH values: PRC(1), SSUT(2), SSUL(3), SEC(4), STU(5), DNU(6). Sonet values: PRS(1), STU(2), ST2(3), ST3(4), SMC(5), ST4(6), DUS(7).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7  

gnSSMStatClockUnitType 1.3.6.1.4.1.2281.3.4.2.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noClockUnit(2), smc(3), sec(4), st3(5), st3e(6)  

gnSSMStatHoldoverPeriod 1.3.6.1.4.1.2281.3.4.2.5
This parameter indicates the minutes time period in holdover state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2880  

gnAccess 1.3.6.1.4.1.2281.4
OBJECT IDENTIFIER    

gnAccessCfg 1.3.6.1.4.1.2281.4.1
OBJECT IDENTIFIER    

gnAccessCfgTable 1.3.6.1.4.1.2281.4.1.1
This table defines the configuration and status of the access ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnAccessCfgEntry

gnAccessCfgEntry 1.3.6.1.4.1.2281.4.1.1.1
Entry for the table containing an interface index for every interface which type is DS3 (30, according to RFC1573).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnAccessCfgEntry  

gnAccessCfgLongCableOption 1.3.6.1.4.1.2281.4.1.1.1.1
This parameter defines the line build-out option. Possible values: For DS3: ds3ShortCable, ds3LongCable. For T1: t1From0to133ft..t1From533to655ft. For E1/E3: anyLength. For T1 in 640 systems: t1FA640From0to110ft..t1FA640From440to550ft.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ds3ShortCable(2), ds3LongCable(3), t1From0to133ft(4), t1From133to266ft(5), t1From266to399ft(6), t1From399to533ft(7), t1From533to655ft(8), anyLength(9), t1FA640From0to110ft(10), t1FA640From110to220ft(11), t1FA640From220to330ft(12), t1FA640From330to440ft(13), t1FA640From440to550ft(14)  

gnAccessCfgLoopbackOption 1.3.6.1.4.1.2281.4.1.1.1.2
This parameter enable the user to launch a loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noloopback(2), interfaceInterLoop(3), interfaceExterLoop(4)  

gnAccessCfgRunPrbs 1.3.6.1.4.1.2281.4.1.1.1.3
This parameter enables launching a PRBS test.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(2), lineOnRadioOnRcvLine(3), lineOnRadioOnRcvRadio(4), lineOnRadioOffRcvLine(5), lineOnRadioOffRcvRadio(6), lineOffRadioOnRcvLine(7), lineOffRadioOnRcvRadio(8), lineOffRadioOffRcvLine(9), lineOffRadioOffRcvRadio(10), lineOnRadioOnRcvOff(11), lineOffRadioOnRcvOff(12), lineOnRadioOffRcvOff(13)  

gnAccessCfgEXCThresh 1.3.6.1.4.1.2281.4.1.1.1.4
If the bit error rate is higher than this threshold an EXC alarm would be generated. EXC is for excessive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4)  

gnAccessCfgSDThresh 1.3.6.1.4.1.2281.4.1.1.1.5
If the bit error rate is higher than this threshold a SD alarm would be generated. SD is for Signal Degrade.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tenExpMinus6(3), tenExpMinus7(4), tenExpMinus8(5), tenExpMinus9(6)  

gnAccessCfgTest 1.3.6.1.4.1.2281.4.1.1.1.6
This parameter controls the action to send AIS or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(2), sendAIS(3)  

gnAccessCfgLineCoding 1.3.6.1.4.1.2281.4.1.1.1.7
The line coding possible values: For T1: B7ZS(ami), B8ZS. For E1 & E3: HDB3. For DS3: B3ZS
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ami(2), b8zs(3), hdb3(4), b3zs(5)  

gnAccessStat 1.3.6.1.4.1.2281.4.2
OBJECT IDENTIFIER    

gnAccessStatTable 1.3.6.1.4.1.2281.4.2.1
This table defines the status of the access ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnAccessStatEntry

gnAccessStatEntry 1.3.6.1.4.1.2281.4.2.1.1
Entry for the table containing an interface index for every interface which type is DS3 (30, according to RFC1573).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnAccessStatEntry  

gnAccessStatInterfaceBer 1.3.6.1.4.1.2281.4.2.1.1.1
Current Bit Error Rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13)  

gnAccessStatStatus 1.3.6.1.4.1.2281.4.2.1.1.2
Alarm status of an ACCESS radio. Bit 1 is MSB, bit=1 when alarm active. bit 2 = LOS bit 6 = AIS bit 9 = SD bit 10 = EXC bit 11 = Unexpected signal -- when disabled, will rise if detect data. bit 14 = Out Of Lock
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

gnAccessStatPrbsBer 1.3.6.1.4.1.2281.4.2.1.1.3
Current PRBS Errors of the operation set in the mib variable gnAccessCfgRunPrbs, use this variable to clear the error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13)  

gnAccessStatValidIntervals 1.3.6.1.4.1.2281.4.2.1.1.4
The number of previous valid intervals for which valid data has been stored for the specific interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..96  

gnFastEthernetCfg 1.3.6.1.4.1.2281.4.3
OBJECT IDENTIFIER    

gnFastEthernetCfgTable 1.3.6.1.4.1.2281.4.3.1
This table defines the configuration of the Fast Ethernet ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnFastEthernetCfgEntry

gnFastEthernetCfgEntry 1.3.6.1.4.1.2281.4.3.1.1
This is an entry in the Fast Ethernet configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnFastEthernetCfgEntry  

gnFastEthernetCfgAutoNegotiation 1.3.6.1.4.1.2281.4.3.1.1.1
This parameter defines if auto negotiations protocol is active.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

gnFastEthernetCfgForceSpeed 1.3.6.1.4.1.2281.4.3.1.1.2
This parameter force speed when auto negotiation is off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tenBased(2), hundredBased(3)  

gnFastEthernetCfgDynamicBand 1.3.6.1.4.1.2281.4.3.1.1.3
Dynamic bandwidth allocation: dynamic means that the two Fast Ethernet ports have the same priority. LeftPreferred indicates that left Fast Ethernet card priority is higher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notActive(2), dynamic(3), leftPreferred(4), vlanPriority(5), ipPriority(6)  

gnFastEthernetCfgGigabitEthernet 1.3.6.1.4.1.2281.4.3.1.1.4
Gigabit Ethernet option. This parameter will be changed after reset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(2), enable(3)  

gnFastEthernetCfgDuplexMode 1.3.6.1.4.1.2281.4.3.1.1.5
This parameter force duplex mode when auto negotiation is off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER halfDuplex(2), fullDuplex(3)  

gnFastEthernetCfgQueuingScheme 1.3.6.1.4.1.2281.4.3.1.1.6
This parameter set the Queuing algorithm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fixedPriority(2), weightedFair(3)  

gnFastEthernetStat 1.3.6.1.4.1.2281.4.4
OBJECT IDENTIFIER    

gnFastEthernetStatTable 1.3.6.1.4.1.2281.4.4.1
The Fast Ethernet status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnFastEthernetStatEntry

gnFastEthernetStatEntry 1.3.6.1.4.1.2281.4.4.1.1
This is an entry in the Fast Ethernet status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnFastEthernetStatEntry  

gnFastEthernetStatStatus 1.3.6.1.4.1.2281.4.4.1.1.1
Alarm status of an FE radio. Bit 1 is MSB, bit=1 when alarm active. bit 2 = Loss of Carrier
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

gnPdhMon 1.3.6.1.4.1.2281.4.5
OBJECT IDENTIFIER    

gnPdhMonCurrTable 1.3.6.1.4.1.2281.4.5.1
This table maintains the counters for the PDH table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnPdhMonCurrEntry

gnPdhMonCurrEntry 1.3.6.1.4.1.2281.4.5.1.1
This is an entry in the PDH Counters Table. This table contains an interface index for every interface which type is DS3(30, according to RFC1573).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnPdhMonCurrEntry  

gnPdhMonCurrES 1.3.6.1.4.1.2281.4.5.1.1.1
The current number of errored seconds starting from the present 15 minute period. .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonCurrSES 1.3.6.1.4.1.2281.4.5.1.1.2
The current number of severely errored seconds, starting from the present 15 minute period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonCurrBBE 1.3.6.1.4.1.2281.4.5.1.1.3
The current number of Background Block Errors starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonCurrUAS 1.3.6.1.4.1.2281.4.5.1.1.4
The current number of Unavailable Seconds starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonCurrCV 1.3.6.1.4.1.2281.4.5.1.1.5
The current number of CV starting from the present 15 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonCurrLastDayES 1.3.6.1.4.1.2281.4.5.1.1.6
The current number of Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonCurrLastDaySES 1.3.6.1.4.1.2281.4.5.1.1.7
The current number of Severely Errored Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonCurrLastDayBBE 1.3.6.1.4.1.2281.4.5.1.1.8
The current number of Background Block Errors starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonCurrLastDayUAS 1.3.6.1.4.1.2281.4.5.1.1.9
The current number of Unavailable Seconds starting from the present 24 hours period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonCurrLastDayCV 1.3.6.1.4.1.2281.4.5.1.1.10
The current number of CV, starting from the present 24-hour period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonCurrLastDayIDF 1.3.6.1.4.1.2281.4.5.1.1.11
IDF = Invalid Data Flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnPdhMonIntervalTable 1.3.6.1.4.1.2281.4.5.2
This table maintains the counters of the PDH per interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnPdhMonIntervalEntry

gnPdhMonIntervalEntry 1.3.6.1.4.1.2281.4.5.2.1
This is an entry in the PDH Counters Table. This table contains an interface index for every interface which type is DS3(30, according to RFC1573). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnPdhMonIntervalEntry  

gnPdhMonIntervalIdx 1.3.6.1.4.1.2281.4.5.2.1.1
This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

gnPdhMonIntervalES 1.3.6.1.4.1.2281.4.5.2.1.2
The number of errored seconds per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonIntervalSES 1.3.6.1.4.1.2281.4.5.2.1.3
The number of severely errored seconds per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonIntervalBBE 1.3.6.1.4.1.2281.4.5.2.1.4
The number of Background Block Errors per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonIntervalUAS 1.3.6.1.4.1.2281.4.5.2.1.5
The number of Unavailable Seconds per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonIntervalCV 1.3.6.1.4.1.2281.4.5.2.1.6
The number of CV per interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonIntervalIDF 1.3.6.1.4.1.2281.4.5.2.1.7
IDF = Invalid Data Flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnPdhMonDayTable 1.3.6.1.4.1.2281.4.5.3
This table maintains the counters of the PDH per 24 hours interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnPdhMonDayEntry

gnPdhMonDayEntry 1.3.6.1.4.1.2281.4.5.3.1
This is an entry in the PDH Counters Table. This table contains an interface index for every interface which type is DS3(30, according to RFC1573). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnPdhMonDayEntry  

gnPdhMonDayIdx 1.3.6.1.4.1.2281.4.5.3.1.1
This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnPdhMonDayES 1.3.6.1.4.1.2281.4.5.3.1.2
The number of Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonDaySES 1.3.6.1.4.1.2281.4.5.3.1.3
The number of Severely Errored Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonDayBBE 1.3.6.1.4.1.2281.4.5.3.1.4
The number of Background Block Errors per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonDayUAS 1.3.6.1.4.1.2281.4.5.3.1.5
The number of Unavailable Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonDayCV 1.3.6.1.4.1.2281.4.5.3.1.6
The number of Code Violation Seconds per interval of 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

gnPdhMonDayIDF 1.3.6.1.4.1.2281.4.5.3.1.7
IDF = Invalid Data Flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnFastEthernetMon 1.3.6.1.4.1.2281.4.6
OBJECT IDENTIFIER    

gnFastEthernetMonPrivateTable 1.3.6.1.4.1.2281.4.6.1
The Fast Ethernet Private Statistics Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnFastEthernetMonPrivateEntry

gnFastEthernetMonPrivateEntry 1.3.6.1.4.1.2281.4.6.1.1
This is an entry in the Fast Ethernet private statistics table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnFastEthernetMonPrivateEntry  

gnFastEthernetMonPrivateAlignmentErrors 1.3.6.1.4.1.2281.4.6.1.1.1
The number of received packets with an alignment error (Received frame length is not a multiple of 8 bits, and an FCS error had occurred).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnFastEthernetMonPrivateFcsErrors 1.3.6.1.4.1.2281.4.6.1.1.2
Total number of received packets with a frame check sequence (FCS) or Cycle Redundancy Check (CRC) error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnFastEthernetMonPrivateFrameTooLongs 1.3.6.1.4.1.2281.4.6.1.1.3
Total number of received frames with an illegal packet length (>1518 bytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnFastEthernetMonStdHiTable 1.3.6.1.4.1.2281.4.6.2
This table contains the 32 high bits (MSB) of RFC1213 statistics for Fast Ethernet.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnFastEthernetMonStdHiEntry

gnFastEthernetMonStdHiEntry 1.3.6.1.4.1.2281.4.6.2.1
This is an entry in the Fast Ethernet Standard Statistics Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnFastEthernetMonStdHiEntry  

gnFastEthernetMonStdHiInOctetsHC 1.3.6.1.4.1.2281.4.6.2.1.1
The 32 MSB of The total number of octets received on the interface, including framing characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnFastEthernetMonStdHiInUcastPktsHC 1.3.6.1.4.1.2281.4.6.2.1.2
The 32 MSB of The number of subnetwork-unicast packets delivered to a higher-layer protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnFastEthernetMonStdHiInNUcastPktsHC 1.3.6.1.4.1.2281.4.6.2.1.3
The 32 MSB of The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnFastEthernetMonStdHiOutOctetsHC 1.3.6.1.4.1.2281.4.6.2.1.4
The 32 MSB of The total number of octets transmitted out of the interface, including framing characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnFastEthernetMonStdHiOutUcastPktsHC 1.3.6.1.4.1.2281.4.6.2.1.5
The 32 MSB of The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnFastEthernetMonStdHiOutNUcastPktsHC 1.3.6.1.4.1.2281.4.6.2.1.6
The 32 MSB of The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnTrailCfg 1.3.6.1.4.1.2281.4.7
OBJECT IDENTIFIER    

gnTrailCfgTable 1.3.6.1.4.1.2281.4.7.1
This table defines the configuration of the trail ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnTrailCfgEntry

gnTrailCfgEntry 1.3.6.1.4.1.2281.4.7.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnTrailCfgEntry  

gnTrailCfgTrailName 1.3.6.1.4.1.2281.4.7.1.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

gnTrailCfgProtection 1.3.6.1.4.1.2281.4.7.1.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER protected(2), unprotected(3)  

gnTrailCfgLowPathIndex 1.3.6.1.4.1.2281.4.7.1.1.3
This parameter indicates the K.L.M index. It includes 3 digits: K - most significant digit, L - next digit, M - last significant digit. For E1 ports (SDH): K=1..3 ; L=1..7 ; M=1..3. For T1 ports (Sonet): K=1..3 ; L=1..7 ; M=1..4. For DS3/E3: K=1..3 ; L=M=0. If there is no K.L.M index: K=L=M=0. Example: for mapping an E1 port to K.L.M = 2.5.3, write 253.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnTrailCfgLowPathSide 1.3.6.1.4.1.2281.4.7.1.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER east(2), west(3)  

gnTrailCfgProtectionOptions 1.3.6.1.4.1.2281.4.7.1.1.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inhibit(2), auto(3)  

gnTrailCfgMismatchJ2 1.3.6.1.4.1.2281.4.7.1.1.6
In case of J2 mismatch error, send alarm or send AIS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sendAlarm(2), sendAIS(3), ignoreAlarm(4)  

gnTrailCfgTransmittedJ2 1.3.6.1.4.1.2281.4.7.1.1.7
This is the J2 string that would be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnTrailCfgExpectedJ2 1.3.6.1.4.1.2281.4.7.1.1.8
This is the J2 string that is expected to be received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

gnTrailCfgReversionMode 1.3.6.1.4.1.2281.4.7.1.1.9
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER revertive(2), nonRevertive(3)  

gnTrailCfgProtectionUserCommand 1.3.6.1.4.1.2281.4.7.1.1.10
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(2), switchToProtection(3), switchToWorking(4)  

gnTrailCfgHoldOffTime 1.3.6.1.4.1.2281.4.7.1.1.11
This is the hold-off time in milliseconds. Possible values: 0..20000, 100 mSec steps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..20000  

gnTrailCfgOscillationGuardTime 1.3.6.1.4.1.2281.4.7.1.1.12
This is the oscillation guard time in seconds. Possible values: 0..60.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..60  

gnTrailCfgWaitToRestoreTime 1.3.6.1.4.1.2281.4.7.1.1.13
This is the wait-to-restore time in minutes. Possible values: 5..12.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..12  

gnTrailCfgSignalLabelMismatch 1.3.6.1.4.1.2281.4.7.1.1.14
In case of a V5 mismatch error, send or don't send AIS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sendAlarm(2), sendAIS(3)  

gnTrailCfgBERConsAction 1.3.6.1.4.1.2281.4.7.1.1.15
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sendAlarm(2), sendAISDoPathProtection(3), doPathProtection(4)  

gnTribCfg 1.3.6.1.4.1.2281.4.8
OBJECT IDENTIFIER    

gnTribCfgTable 1.3.6.1.4.1.2281.4.8.1
This table defines the configuration of the virtual trails in the Trib STM-1.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnTribCfgEntry

gnTribCfgEntry 1.3.6.1.4.1.2281.4.8.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnTribCfgEntry  

gnTribCfgLowPathIndex 1.3.6.1.4.1.2281.4.8.1.1.1
This parameter indicates the K.L.M index. It includes 3 digits: K - most significant digit, L - next digit, M - last significant digit. For E1 ports (SDH): K=1..3 ; L=1..7 ; M=1..3. For T1 ports (Sonet): K=1..3 ; L=1..7 ; M=1..4. For DS3/E3: K=1..3 ; L=M=0. If there is no K.L.M index: K=L=M=0. Example: for mapping an E1 port to K.L.M = 2.5.3, write 253.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnTribCfgLowPathSide 1.3.6.1.4.1.2281.4.8.1.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER east(2), west(3)  

gnTribCfgProtection 1.3.6.1.4.1.2281.4.8.1.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER protected(2), unprotected(3)  

gnTribCfgProtectionOptions 1.3.6.1.4.1.2281.4.8.1.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inhibit(2), auto(3)  

gnTribCfgReversionMode 1.3.6.1.4.1.2281.4.8.1.1.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER revertive(2), nonRevertive(3)  

gnTribCfgProtectionUserCommand 1.3.6.1.4.1.2281.4.8.1.1.6
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(2), switchToProtection(3), switchToWorking(4)  

gnTribCfgHoldOffTime 1.3.6.1.4.1.2281.4.8.1.1.7
This is the hold-off time in milliseconds. Possible values: 0..20000, 100 mSec steps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..20000  

gnTribCfgOscillationGuardTime 1.3.6.1.4.1.2281.4.8.1.1.8
This is the oscillation guard time in seconds. Possible values: 0..60.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..60  

gnTribCfgWaitToRestoreTime 1.3.6.1.4.1.2281.4.8.1.1.9
This is the wait-to-restore time in minutes. Possible values: 5..12.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..12  

gnTribCfgKLM 1.3.6.1.4.1.2281.4.8.1.1.10
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gnTrailPassThrough 1.3.6.1.4.1.2281.4.9
OBJECT IDENTIFIER    

gnTrailPassThroughTable 1.3.6.1.4.1.2281.4.9.1
This table defines the configuration of the virtual trails in the Trib STM-1. It is applicable for ADM
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnTrailPassThroughEntry

gnTrailPassThroughEntry 1.3.6.1.4.1.2281.4.9.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnTrailPassThroughEntry  

gnTrailPassThroughIndex 1.3.6.1.4.1.2281.4.9.1.1.1
This is the index of Trail Pass-Through Table. SDH(1-63), Sonet (1-84).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..84  

gnTrailPassThroughName 1.3.6.1.4.1.2281.4.9.1.1.2
for NMS use
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

gnGigabitEthernetCfg 1.3.6.1.4.1.2281.4.10
OBJECT IDENTIFIER    

gnGigabitEthernetCfgTable 1.3.6.1.4.1.2281.4.10.1
This table defines the configuration of the Gigabit Ethernet port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnGigabitEthernetCfgEntry

gnGigabitEthernetCfgEntry 1.3.6.1.4.1.2281.4.10.1.1
This is an entry in the Gigabit Ethernet configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnGigabitEthernetCfgEntry  

gnGigabitEthernetCfgPauseFrameGenerating 1.3.6.1.4.1.2281.4.10.1.1.1
This parameter defines the option to generate pause frames when the Tx FIFO reaches his threshold level (enable) or to (when disabled) stop generate pause frame.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnGigabitEthernetCfgMuteOnExcError 1.3.6.1.4.1.2281.4.10.1.1.2
This parameter defines whether to mute GBE Tx on excessive BER.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnGigabitEthernetCfgMuteOnSd 1.3.6.1.4.1.2281.4.10.1.1.3
This parameter defines whether to mute GBE Tx port on signal degrade.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnGigabitEthernetCfgMuteOnRemoteRadioFault 1.3.6.1.4.1.2281.4.10.1.1.4
This parameter defines whether to mute GBE Tx port on exe error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnGigabitEthernetCfgSpeedAndDuplex 1.3.6.1.4.1.2281.4.10.1.1.5
This parameter defines the speed and duplex of the gigabit port, this parameter is not relevant when using an electric SFP giga line interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER autoNegotiation(2), thousandBasedFullDuplex(3), thousandBasedHalfDuplex(4), hundredBasedFullDuplex(5), hundredBasedHalfDuplex(6), tenBasedFullDuplex(7), tenBasedHalfDuplex(8)  

gnGigabitEthernetCfgSchedulerPriorityOption 1.3.6.1.4.1.2281.4.10.1.1.6
This parameter defines the algorithm, which the Ethernet packets are taken from the 4 queues. Strict - The Packets are taken according to strict order (from queue #1 till queue #4). HRR - Hierarchal Round Robin - the Ethernet packets are taken according to the configure weight.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER strict(2), hrr(3)  

gnGigabitEthernetCfgSchedulerQueue1Weight 1.3.6.1.4.1.2281.4.10.1.1.7
This parameter set the weight of the queue.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER strict(17)  

gnGigabitEthernetCfgSchedulerQueue2Weight 1.3.6.1.4.1.2281.4.10.1.1.8
This parameter set the weight of the queue.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

gnGigabitEthernetCfgSchedulerQueue3Weight 1.3.6.1.4.1.2281.4.10.1.1.9
This parameter set the weight of the queue.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

gnGigabitEthernetCfgSchedulerQueue4Weight 1.3.6.1.4.1.2281.4.10.1.1.10
This parameter set the weight of the queue.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

gnGigabitEthernetCfgClassifierFirstPrioUDP 1.3.6.1.4.1.2281.4.10.1.1.11
This parameter set the administrative status for priority override to UDP packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnGigabitEthernetCfgClassifierPrioBitSource 1.3.6.1.4.1.2281.4.10.1.1.12
This parameter set the administrative status for priority bits source.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(2), externalOverhead(3), vlan(4), ip(5), mpls(6)  

gnGigabitEthernetCfgClassifierGroupMinVlanId 1.3.6.1.4.1.2281.4.10.1.1.13
This parameter set the minimum VLAN Id for the current group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

gnGigabitEthernetCfgClassifierGroupMaxVlanId 1.3.6.1.4.1.2281.4.10.1.1.14
This parameter set the maximum VLAN Id for the current group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

gnGigabitEthernetCfgClassifierGroupVlanPriority 1.3.6.1.4.1.2281.4.10.1.1.15
This parameter set the VLAN priority for the current group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER clear(0), queue1(1), queue2(2), queue3(3), queue4(4)  

gnGigabitEthernetCfgClassifierGroupVlanSet 1.3.6.1.4.1.2281.4.10.1.1.16
This parameter release the agent to configure the current group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(2), notActive(3)  

gnGigabitEthernetCfgAcmMuteOnMinConstellation 1.3.6.1.4.1.2281.4.10.1.1.17
This parameter defines on which constellation to mute the GBE Tx port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER acm4QAM(2), acm8QAM(3), acm16QAM(4), acm32QAM(5), acm64QAM(6), acm128QAM(7), acm256QAM(8)  

gnGigabitEthernetCfgEnableAutomaticTxMute 1.3.6.1.4.1.2281.4.10.1.1.18
This parameter enable\disable automatic Tx mute by system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnGigabitEthernetCfgTrafficBISTAdmin 1.3.6.1.4.1.2281.4.10.1.1.19
This parameter activate\deactivate GBE traffic test.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(2), notActive(3)  

gnGigabitEthernetCfgClearStatistics 1.3.6.1.4.1.2281.4.10.1.1.20
This parameter clear the gigabit ethernet statistics.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(2), clear(3)  

gnGigabitEthernetCfgPauseFrameForwarding 1.3.6.1.4.1.2281.4.10.1.1.21
This parameter define if pause frame are forward. if enable pause frame are forward to the user application. if disable pause frame are terminated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(3)  

gnGigabitEthernetCfgPhyLoopback 1.3.6.1.4.1.2281.4.10.1.1.22
This parameter enable disable PHY internal loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noloopback(2), interfaceInterLoop(3)  

gnVlanEthernetStat 1.3.6.1.4.1.2281.4.11
OBJECT IDENTIFIER    

gnVlanEthernetStatTable 1.3.6.1.4.1.2281.4.11.1
This table illustrate the VLAN configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnVlanEthernetStatEntry

gnVlanEthernetStatEntry 1.3.6.1.4.1.2281.4.11.1.1
This is an entry in the Vlan configuration status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnVlanEthernetStatEntry  

gnVlanEthernetStatGroupId 1.3.6.1.4.1.2281.4.11.1.1.1
This parameter illustrate the VLAN group #.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..20  

gnVlanEthernetStatMinVlanId 1.3.6.1.4.1.2281.4.11.1.1.2
This parameter illustrate the minimum VLAN id # of a specific group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

gnVlanEthernetStatMaxVlanId 1.3.6.1.4.1.2281.4.11.1.1.3
This parameter illustrate the maximum VLAN id # of a specific group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

gnVlanEthernetStatVlanPriority 1.3.6.1.4.1.2281.4.11.1.1.4
This parameter illustrate the priority of a specific VLAN group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER queue1(1), queue2(2), queue3(3), queue4(4)  

gnGigabitEthernetStat 1.3.6.1.4.1.2281.4.12
OBJECT IDENTIFIER    

gnGigabitEthernetStatTable 1.3.6.1.4.1.2281.4.12.1
The Gigabit Ethernet status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnGigabitEthernetStatEntry

gnGigabitEthernetStatEntry 1.3.6.1.4.1.2281.4.12.1.1
This is an entry in the Gigabit Ethernet status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnGigabitEthernetStatEntry  

gnGigabitEthernetStatBistErrorSeconds 1.3.6.1.4.1.2281.4.12.1.1.1
Traffic BIST results (error seconds)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnGigabitEthernetStatSpeedAndDuplexSupport 1.3.6.1.4.1.2281.4.12.1.1.2
This field is used only by the element management application. bit #7 - 1 auto negotiation is supported 0 otherwise (MSB). bit #6 - 1 1000 full is supported 0 otherwise. bit #5 - 1 1000 half is supported 0 otherwise. bit #4 - 1 100 full is supported 0 otherwise. bit #3 - 1 100 half is supported 0 otherwise. bit #2 - 1 10 full is supported 0 otherwise. bit #1 - 1 10 half is supported 0 otherwise. bit #0 - not used (LSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

gnGigabitEthernetStatValidIntervals 1.3.6.1.4.1.2281.4.12.1.1.3
The number of previous valid intervals for which valid data has been stored for the specific GBE interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..96  

gnGigabitEthernetStatSpeedAndDuplexMode 1.3.6.1.4.1.2281.4.12.1.1.4
Current speed and duplex mode of the giga port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER thousandBasedFullDuplex(3), thousandBasedHalfDuplex(4), hundredBasedFullDuplex(5), hundredBasedHalfDuplex(6), tenBasedFullDuplex(7), tenBasedHalfDuplex(8)  

gnGigabitEthernetMon 1.3.6.1.4.1.2281.4.13
OBJECT IDENTIFIER    

gnGigabitEthernetMonCurrTable 1.3.6.1.4.1.2281.4.13.1
This table maintains the PM for the gigabit ethernet table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnGigabitEthernetMonCurrEntry

gnGigabitEthernetMonCurrEntry 1.3.6.1.4.1.2281.4.13.1.1
This is an entry in the PDH Counters Table. This table contains an interface index for every interface which type is GBE(VAL_ifType_ethernetCsmacd-6, according to RFC1573).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnGigabitEthernetMonCurrEntry  

gnGigabitEthernetMonCurrPacketErrorRate 1.3.6.1.4.1.2281.4.13.1.1.1
The packet error rate ( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) ) starting from the present 15 minute period, the calculation is in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

gnGigabitEthernetMonCurrIDF 1.3.6.1.4.1.2281.4.13.1.1.2
IDF = Invalid Data Flag in current 15 minutes interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnGigabitEthernetMonCurrDayPacketErrorRate 1.3.6.1.4.1.2281.4.13.1.1.3
The packet error rate ( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) ) starting from the present 24 hour period, the calculation is in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

gnGigabitEthernetMonCurrDayIDF 1.3.6.1.4.1.2281.4.13.1.1.4
IDF = Invalid Data Flag in current 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnGigabitEthernetMonIntervalTable 1.3.6.1.4.1.2281.4.13.2
This table maintains the PM of the GBE per interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnGigabitEthernetMonIntervalEntry

gnGigabitEthernetMonIntervalEntry 1.3.6.1.4.1.2281.4.13.2.1
This is an entry in the GBE PM Table. This table contains an interface index for every interface which type is GBE(VAL_ifType_ethernetCsmacd-6, according to RFC1573). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnGigabitEthernetMonIntervalEntry  

gnGigabitEthernetMonIntervalIdx 1.3.6.1.4.1.2281.4.13.2.1.1
This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..96  

gnGigabitEthernetMonIntervalPacketErrorRate 1.3.6.1.4.1.2281.4.13.2.1.2
The packet error rate per interval( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) ) per 15 minutes interval, the calculation is in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

gnGigabitEthernetMonIntervalIDF 1.3.6.1.4.1.2281.4.13.2.1.3
IDF = Invalid Data Flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnGigabitEthernetMonDayTable 1.3.6.1.4.1.2281.4.13.3
This table maintains the PM of the GBE per 24 hours interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnGigabitEthernetMonDayEntry

gnGigabitEthernetMonDayEntry 1.3.6.1.4.1.2281.4.13.3.1
This is an entry in the GBE PM Table. This table contains an interface index for every interface which type is GBE(VAL_ifType_ethernetCsmacd-6, according to RFC1573). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnGigabitEthernetMonDayEntry  

gnGigabitEthernetMonDayIdx 1.3.6.1.4.1.2281.4.13.3.1.1
This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

gnGigabitEthernetMonDayPacketErrorRate 1.3.6.1.4.1.2281.4.13.3.1.2
The packet error rate per interval( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) ) per 24 hour interval, the calculation is in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

gnGigabitEthernetMonDayIDF 1.3.6.1.4.1.2281.4.13.3.1.3
IDF = Invalid Data Flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(2), on(3)  

gnEthStatistic 1.3.6.1.4.1.2281.4.14
OBJECT IDENTIFIER    

gnEthStatisticTable 1.3.6.1.4.1.2281.4.14.1
This table illustrate the gigabit ethernet statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GnEthStatisticEntry

gnEthStatisticEntry 1.3.6.1.4.1.2281.4.14.1.1
This is an entry in the gigabit ethernet statistics table. This table illustrate the MSB value of the RMON II statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GnEthStatisticEntry  

gnEthStatisticIfInOctetsMsb 1.3.6.1.4.1.2281.4.14.1.1.1
The total number of octets received on the interface, including framing characters (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticAFrameReceivedOkLsb 1.3.6.1.4.1.2281.4.14.1.1.2
Sum of frames received without error (LSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticAFrameReceivedOkMsb 1.3.6.1.4.1.2281.4.14.1.1.3
Sum of frames received without error (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticCRCAlignErrorsMsb 1.3.6.1.4.1.2281.4.14.1.1.4
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error), (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticIfInUcastPktsMsb 1.3.6.1.4.1.2281.4.14.1.1.5
The number of subnetwork-unicast packets delivered to a higher-layer protocol (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticBroadcastPktsMsb 1.3.6.1.4.1.2281.4.14.1.1.6
The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticMulticastPktsMsb 1.3.6.1.4.1.2281.4.14.1.1.7
The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticUndersizePktsMsb 1.3.6.1.4.1.2281.4.14.1.1.8
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticOversizePktsMsb 1.3.6.1.4.1.2281.4.14.1.1.9
The total number of packets received that were longer than 12000 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. (MSB)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticPkts64OctetMsb 1.3.6.1.4.1.2281.4.14.1.1.10
The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets), (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticPkts65to127OctetMsb 1.3.6.1.4.1.2281.4.14.1.1.11
The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets), (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticPkts128to255OctetMsb 1.3.6.1.4.1.2281.4.14.1.1.12
The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets), (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticPkts256to511OctetMsb 1.3.6.1.4.1.2281.4.14.1.1.13
The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets), (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticPkts512to1023OctetMsb 1.3.6.1.4.1.2281.4.14.1.1.14
The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets), (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticPkts1024to1518OctetMsb 1.3.6.1.4.1.2281.4.14.1.1.15
The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets), (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticRadioTransmitFramesLsb 1.3.6.1.4.1.2281.4.14.1.1.16
Sum of frame transmitted to radio (LSB)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticRadioTransmitFramesMsb 1.3.6.1.4.1.2281.4.14.1.1.17
Sum of frame transmitted to radio (MSB)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticDroppedPacketsLsb 1.3.6.1.4.1.2281.4.14.1.1.18
number of frames dropped (LSB)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticDroppedPacketsMsb 1.3.6.1.4.1.2281.4.14.1.1.19
number of frames dropped (MSB)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticRadioReceivedFramesLsb 1.3.6.1.4.1.2281.4.14.1.1.20
Sum of frames received by radio (LSB)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticRadioReceivedFramesMsb 1.3.6.1.4.1.2281.4.14.1.1.21
Sum of frames received by radio (MSB)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticRadioReceivedCrcFramesLsb 1.3.6.1.4.1.2281.4.14.1.1.22
sum of frames received with error (LSB)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticRadioReceivedCrcFramesMsb 1.3.6.1.4.1.2281.4.14.1.1.23
sum of frames received with error (MSB)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticRadioSyncUnlockEventsLsb 1.3.6.1.4.1.2281.4.14.1.1.24
sum of GFP not locked events (LSB)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticRadioSyncUnlockEventsMsb 1.3.6.1.4.1.2281.4.14.1.1.25
sum of GFP not locked events (MSB)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticAFrameTransmittedOkLsb 1.3.6.1.4.1.2281.4.14.1.1.26
Sum of valid frames transmitted to line (LSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticAFrameTransmittedOkMsb 1.3.6.1.4.1.2281.4.14.1.1.27
Sum of valid frames transmitted to line (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticIfOutOctetsMsb 1.3.6.1.4.1.2281.4.14.1.1.28
The total number of octets transmitted out of the interface, including framing characters (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticEtherStatsPktsMsb 1.3.6.1.4.1.2281.4.14.1.1.29
The total number of packets (including bad packets, broadcast packets, and multicast packets) received (MSB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnEthStatisticEtherStatsOctetsMsb 1.3.6.1.4.1.2281.4.14.1.1.30
The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

gnLastDummy 1.3.6.1.4.1.2281.9
OBJECT IDENTIFIER    

gnLastDummyParam 1.3.6.1.4.1.2281.9.1
This parameter specifies the end of MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gnODUTrap 1
The trap is sent every time an alarm occurs in the ODU.
TRAP-TYPE    

gnIDUTrap 2
The trap is sent every time an alarm occurs in the IDU.
TRAP-TYPE    

gnSDHTrap 3
The trap is sent every time an alarm occurs in the Regenerator section in the SONET/SDH.
TRAP-TYPE    

gnACCESSTrap 4
The trap is sent every time an alarm occurs in an Access line.
TRAP-TYPE    

gnODUTrapCleared 5
The trap is sent every time an alarm occurs in the ODU.
TRAP-TYPE    

gnIDUTrapCleared 6
The trap is sent every time an alarm occurs in the IDU.
TRAP-TYPE    

gnSDHTrapCleared 7
The trap is sent every time an alarm occurs in the Regenerator section in the SONET/SDH.
TRAP-TYPE    

gnAccessTrapCleared 8
The trap is sent every time an alarm occurs in an Access line.
TRAP-TYPE    

gnLODUPowerFailTrap 10
This Trap is sent every time a Local ODU Power fault occurs.
TRAP-TYPE    

gnLODUSynthUnLockTrap 11
This Trap is sent every time a Local ODU Hardware fault occurs .
TRAP-TYPE    

gnLODUTxLevelOutOfRangeTrap 12
This Trap is sent every time a Local ODU TX signal is out of range.
TRAP-TYPE    

gnLODURxLevelOutOfRangeTrap 13
This Trap is sent every time a Local ODU RX signal is out of range.
TRAP-TYPE    

gnLODUExtremeTempTrap 14
This Trap is sent every time a Local ODU extreme temperature event occurs.
TRAP-TYPE    

gnLIDUPowerFailTrap 15
This Trap is sent every time a Local IDU Power fault occurs.
TRAP-TYPE    

gnLCableFaultTrap 16
This Trap is sent every time a Local IDU-ODU cable fault occurs.
TRAP-TYPE    

gnLModemFailTrap 17
This Trap is sent every time a Local Modem faults occurs.
TRAP-TYPE    

gnLIDUExtremeTempTrap 18
This Trap is sent every time a Local IDU extreme temperature event occurs.
TRAP-TYPE    

gnLLoopbackOnTrap 19
This Trap is sent every time a Local Loopback is activated.
TRAP-TYPE    

gnLRemoteCommFaultTrap 20
This Trap is sent every time the remote communication is disconnected.
TRAP-TYPE    

gnLTestRunningTrap 21
This Trap is sent every time a Local SDH/SONET test is activated.
TRAP-TYPE    

gnLLOFTrap 22
This Trap is sent every time a Local Loss of Frame alarm occurs.
TRAP-TYPE    

gnLLOSTrap 23
This Trap is sent every time a Local Loss of signal alarm occurs.
TRAP-TYPE    

gnLTIMTrap 24
This Trap is sent every time a Local Trace Identifier Mismatch alarm occurs.
TRAP-TYPE    

gnLEXCTrap 25
This Trap is sent every time a Local Excessive BER alarm is raised.
TRAP-TYPE    

gnLSDTrap 26
This Trap is sent every time a Local Signal Degrade alarm is raised.
TRAP-TYPE    

gnLRcvAisTrap 27
This Trap is sent every time the local terminal receives an Alarm Indication Signal (AIS).
TRAP-TYPE    

gnLUnExpTrap 28
This Trap is sent every time a Local terminal receives an unexpected signal.
TRAP-TYPE    

gnLLocTrap 29
This Trap is sent every time a Local Loss of Clock alarm occurs.
TRAP-TYPE    

gnLLopTrap 30
This Trap is sent every time a Local Loss of pointer alarm occurs.
TRAP-TYPE    

gnLRdiTrap 31
This Trap is sent every time the local terminal receives a Remote Defect Identifier signal (RDI).
TRAP-TYPE    

gnLSlmTrap 32
This Trap is sent every time a Local Signal (Payload) Label Mismatch alarm occurs.
TRAP-TYPE    

gnLUnqTrap 33
This Trap is sent every time a Local unequipped signal is received.
TRAP-TYPE    

gnLExternalAlarm1OnTrap 34
This Trap is sent every time a Local External alarm 1 is raised.
TRAP-TYPE    

gnLExternalAlarm2OnTrap 35
This Trap is sent every time a Local External alarm 2 is raised.
TRAP-TYPE    

gnLExternalAlarm3OnTrap 36
This Trap is sent every time a Local External alarm 3 is raised.
TRAP-TYPE    

gnLExternalAlarm4OnTrap 37
This Trap is sent every time a Local External alarm 4 is raised.
TRAP-TYPE    

gnLExternalAlarm5OnTrap 38
This Trap is sent every time a Local External alarm 5 is raised.
TRAP-TYPE    

gnLExternalAlarm6OnTrap 39
This Trap is sent every time a Local External alarm 6 is raised.
TRAP-TYPE    

gnLExternalAlarm7OnTrap 40
This Trap is sent every time a Local External alarm 7 is raised.
TRAP-TYPE    

gnLExternalAlarm8OnTrap 41
This Trap is sent every time a Local External alarm 8 is raised.
TRAP-TYPE    

gnLSystemFaultTrap 42
This Trap is sent every time a Local System fault occurs.
TRAP-TYPE    

gnLTftpFaultTrap 43
This Trap is sent every time a Local TFTP Download fails.
TRAP-TYPE    

gnLInternalDownloadFaultTrap 44
This Trap is sent every time a Local internal Download fails.
TRAP-TYPE    

gnLIntralinkFaultTrap 45
This Trap is sent every time a Local intra-link download fails.
TRAP-TYPE    

gnLConfMismatchTrap 46
This Trap is sent every time a Local configuration mismatch fault occurs.
TRAP-TYPE    

gnLProtectSwitchFaultTrap 47
This Trap is sent every time a Local Protection fault is raised.
TRAP-TYPE    

gnLProtectCableFaultTrap 48
This Trap is sent every time a Local protection cable fault is raised.
TRAP-TYPE    

gnLHeartBeatTrap 49
This Trap is a periodic heart beat trap.
TRAP-TYPE    

gnLLomTrap 50
This Trap is sent every time a Local Loss of Multi-frame alarm occurs.
TRAP-TYPE    

gnLHitlessProblemTrap 51
This Trap is sent every time a Local Hitless fault occurs.
TRAP-TYPE    

gnLHitlessRadioLofTrap 52
This Trap is sent every time a Local Hitless RadioLOF fault occurs.
TRAP-TYPE    

gnLHitlessCableDisconnectTrap 53
This Trap is sent every time a Local Hitless cable fault is raised.
TRAP-TYPE    

gnLPamTrap 54
This Trap is sent when system in MSP Protection Architecture Mismatch.
TRAP-TYPE    

gnLScmTrap 55
This Trap is sent when there is a MSP Selector Channel Mismatch (K1,K2).
TRAP-TYPE    

gnLInvTrap 56
This Trap indicates that the received K1 byte is invalid (MSP).
TRAP-TYPE    

gnLInbandTrap 57
This Trap is sent when the Inband PPP link goes down.
TRAP-TYPE    

gnWSLOSTrap 58
This Trap is sent when the Wayside channel is in LOS state.
TRAP-TYPE    

gnODUtoODUCableFaultTrap 59
This Trap is sent when there is a problem with the ODU to ODU cable - for XPIC topology only.
TRAP-TYPE    

gnNoSignalReceivedFromODUTrap 60
This Trap is sent when no signal is received from the ODU.
TRAP-TYPE    

gnProtectionLockoutConfiguredTrap 61
This Trap is sent when Protection lockout is configured.
TRAP-TYPE    

gnRFUPowerFailureTrap 62
This Trap is sent in case of 12V/-5V/1.5V/6V/Vdrain power supply failure .
TRAP-TYPE    

gnRFURxLevelPathOutOfRangeTrap 63
This Trap is sent in case of RSL of Main/Diversity channel is very low(typically below -80dBm) .
TRAP-TYPE    

gnRFUExtremeTemperatureTrap 64
This Trap is sent in case of RFU temperature is too high/low .
TRAP-TYPE    

gnRFUFanFailureTrap 65
This Trap is sent in case of fan failure detection by RFU .
TRAP-TYPE    

gnLowSignalToRFUTrap 66
This Trap is sent in case of low IDM signal reception (350MHz) .
TRAP-TYPE    

gnRFUXPICClockFailureTrap 67
This Trap is sent in case of XPIC clock failure .
TRAP-TYPE    

gnRFUDelayCalibrationFailure1Trap 68
This Trap is sent if RX AGC is not locked (-10dBm) .
TRAP-TYPE    

gnRFUDelayCalibrationFailure2Trap 69
This Trap is sent if calibration cannot be done since the notch is too wide/deep .
TRAP-TYPE    

gnLSFPFaultTrap 70
This Trap is sent every time a Gigabit ethernet SFP fault occurs.
TRAP-TYPE    

gnEncryptionFaultTrap 71
This Trap is sent every time a Encryption fault occurs.
TRAP-TYPE    

gnEncryptionSyncLosTrap 72
This Trap is sent every time a Encryption synchhronization loss occurs.
TRAP-TYPE    

gnEncryptionKepTimout 73
This Trap is sent every time a Encryption KEP Timout fault occurs.
TRAP-TYPE    

gnEncryptionSkTimerElapsed 74
This Trap is sent every time a Encryption Session Key Timer elapsed.
TRAP-TYPE    

gnEncryptionPowerUpSelfTestFail 75
This Trap is sent every time a Encryption Power Up Self Test fault occurs.
TRAP-TYPE    

gnEncryptionConditionalTestFail 76
This Trap is sent every time a Encryption Conditional Test fault occurs.
TRAP-TYPE    

gnEncryptionWillTurnOffOnNextRest 77
This Trap is sent every time a Encryption will be turned off on the next reset occurs.
TRAP-TYPE    

gnEncryptionEventReport 78
This Trap is sent every time a Encryption event report occurs.
TRAP-TYPE    

gnEncryptionTechCardWasDetected 79
This Trap is sent every time Encryption Technician card is detected.
TRAP-TYPE    

gnAdminPasswordInDefaultState 80
This Trap is sent every time a admin password is in default state.
TRAP-TYPE    

gnLinkGroupingProtectionFaultTrap 81
This Trap is sent in case of Link Grouping Protection Fault.
TRAP-TYPE    

gnLossOfProtectionTrap 82
This Trap is sent in case of Loss of Protection.
TRAP-TYPE    

gnTempLicenseTrap 83
This Trap is sent in case of Temp License is Enable.
TRAP-TYPE    

gnMultiRadioProblemTrap 84
This Trap is sent every time a multi radio fault occurs.
TRAP-TYPE    

gnLODUPowerOkTrap 110
This Trap is sent every time a Local ODU Power fault cleared.
TRAP-TYPE    

gnLODUSynthLockTrap 111
This Trap is sent every time a Local ODU Hardware fault is cleared.
TRAP-TYPE    

gnLODUTxLevelInRangeTrap 112
This Trap is sent every time a Local ODU TX signal is in range.
TRAP-TYPE    

gnLODURxLevelInRangeTrap 113
This Trap is sent every time a Local ODU RX signal is in range.
TRAP-TYPE    

gnLODUNormalTempTrap 114
This Trap is sent every time a Local ODU returns to normal temperature.
TRAP-TYPE    

gnLIDUPowerOkTrap 115
This Trap is sent every time a Local IDU Power fault is cleared.
TRAP-TYPE    

gnLCableOkTrap 116
This Trap is sent every time a Local IDU-ODU cable fault is cleared.
TRAP-TYPE    

gnLModemOkTrap 117
This Trap is sent every time a Local Modem faults is cleared.
TRAP-TYPE    

gnLIDUNormalTempTrap 118
This Trap is sent every time a Local IDU returns to normal temperature.
TRAP-TYPE    

gnLLoopbackOffTrap 119
This Trap is sent every time a Local Loopback is cleared.
TRAP-TYPE    

gnLRemoteCommOkTrap 120
This Trap is sent every time the remote communication is re-connected.
TRAP-TYPE    

gnLNoTestRunningTrap 121
This Trap is sent every time a Local SDH/SONET test is cleared.
TRAP-TYPE    

gnLNoLOFTrap 122
This Trap is sent every time a Local Loss of Frame alarm is cleared.
TRAP-TYPE    

gnLNoLOSTrap 123
This Trap is sent every time a Local Loss of Signal alarm is cleared.
TRAP-TYPE    

gnLNoTIMTrap 124
This Trap is sent every time a Local Trace Identifier Mismatch alarm is cleared.
TRAP-TYPE    

gnLNoEXCTrap 125
This Trap is sent every time a Local Excessive BER alarm is cleared.
TRAP-TYPE    

gnLNoSDTrap 126
This Trap is sent every time a Local Signal Degrade alarm is cleared.
TRAP-TYPE    

gnLNoAisTrap 127
This Trap is sent every time the local terminal stops receiving an Alarm Indication Signal (AIS).
TRAP-TYPE    

gnLNoUnExpTrap 128
This Trap is sent every time a Local terminal stops receiving an unexpected signal.
TRAP-TYPE    

gnLNoLocTrap 129
This Trap is sent every time a Local Loss of Carrier (On the FE interfaces) alarm is cleared.
TRAP-TYPE    

gnLNoLopTrap 130
This Trap is sent every time a Local Loss of pointer alarm is cleared.
TRAP-TYPE    

gnLNoRdiTrap 131
This Trap is sent every time the local terminal stops receiving a Remote Defect Identifier signal (RDI).
TRAP-TYPE    

gnLNoSlmTrap 132
This Trap is sent every time a Local Signal (Payload) Label Mismatch alarm is cleared.
TRAP-TYPE    

gnLNoUnqTrap 133
This Trap is sent every time a Local terminal start receiving an equipped signal.
TRAP-TYPE    

gnLExternalAlarm1OffTrap 134
This Trap is sent every time a Local External alarm 1 is cleared.
TRAP-TYPE    

gnLExternalAlarm2OffTrap 135
This Trap is sent every time a Local External alarm 2 is cleared.
TRAP-TYPE    

gnLExternalAlarm3OffTrap 136
This Trap is sent every time a Local External alarm 3 is cleared.
TRAP-TYPE    

gnLExternalAlarm4OffTrap 137
This Trap is sent every time a Local External alarm 4 is cleared.
TRAP-TYPE    

gnLExternalAlarm5OffTrap 138
This Trap is sent every time a Local External alarm 5 is cleared.
TRAP-TYPE    

gnLExternalAlarm6OffTrap 139
This Trap is sent every time a Local External alarm 6 is cleared.
TRAP-TYPE    

gnLExternalAlarm7OffTrap 140
This Trap is sent every time a Local External alarm 7 is cleared.
TRAP-TYPE    

gnLExternalAlarm8OffTrap 141
This Trap is sent every time a Local External alarm 8 is cleared.
TRAP-TYPE    

gnLSystemOkTrap 142
This Trap is sent every time a Local System fault is cleared.
TRAP-TYPE    

gnLTftpOkTrap 143
This Trap is sent every time a Local TFTP Download succeeded.
TRAP-TYPE    

gnLInternalDownloadOkTrap 144
This Trap is sent every time a Local internal Download succeeded.
TRAP-TYPE    

gnLIntralinkOkTrap 145
This Trap is sent every time a Local intra-link download succeeded.
TRAP-TYPE    

gnLNoConfMismatchTrap 146
This Trap is sent every time a Local configuration mismatch fault is cleared.
TRAP-TYPE    

gnLProtectSwitchOkTrap 147
Never sent.
TRAP-TYPE    

gnLProtectCableOkTrap 148
This Trap is sent every time a Local protection cable fault is cleared.
TRAP-TYPE    

gnLLomOkTrap 150
This Trap is sent every time a Local Loss of Multi-frame alarm is cleared.
TRAP-TYPE    

gnLHitlessProblemOKTrap 151
This Trap is sent every time a Local Hitless fault is cleared.
TRAP-TYPE    

gnLHitlessRadioLofOKTrap 152
This Trap is sent every time a Local Hitless RadioLOF fault is cleared.
TRAP-TYPE    

gnLHitlessCableDisconnectOKTrap 153
This Trap is sent every time a Local Hitless cable fault is cleared.
TRAP-TYPE    

gnLPamOkTrap 154
This Trap is sent when system in MSP Protection Architecture Mismatch.
TRAP-TYPE    

gnLScmOkTrap 155
This Trap is sent when there is a MSP Selector Channel Mismatch (K1,K2).
TRAP-TYPE    

gnLInvOkTrap 156
This Trap indicates that the received K1 byte is invalid (MSP).
TRAP-TYPE    

gnLInbandOkTrap 157
This Trap is sent when the Inband PPP link goes up.
TRAP-TYPE    

gnWSNoLOSTrap 158
This Trap is sent when the Wayside channel is in LOS state.
TRAP-TYPE    

gnODUtoODUCableOkTrap 159
This Trap is sent when there is a problem with the ODU to ODU cable - for XPIC topology only.
TRAP-TYPE    

gnSignalReceivedFromODUTrap 160
This Trap is sent when a signal is received from the ODU.
TRAP-TYPE    

gnProtectionLockoutClearededTrap 161
This Trap is sent when Protection lockout is cleared.
TRAP-TYPE    

gnRFUPowerFailureClearedTrap 162
This Trap is sent in case of 12V/-5V/1.5V/6V/Vdrain power supply failure is cleared.
TRAP-TYPE    

gnRFURxLevelPathOutOfRangeClearedTrap 163
This Trap is sent in case of RSL of Main/Diversity channel is not very low .
TRAP-TYPE    

gnRFUExtremeTemperatureClearedTrap 164
This Trap is sent in case of RFU temperature is not too high/low .
TRAP-TYPE    

gnRFUFanFailureClearedTrap 165
This Trap is sent when fan failure is cleared .
TRAP-TYPE    

gnLowSignalToRFUClearedTrap 166
This Trap is sent in case of not low IDM signal reception .
TRAP-TYPE    

gnRFUXPICClockFailureClearedTrap 167
This Trap is sent in case of XPIC clock failure is cleared .
TRAP-TYPE    

gnRFUDelayCalibrationFailure1ClearedTrap 168
This Trap is sent if RX AGC is locked .
TRAP-TYPE    

gnRFUDelayCalibrationFailure2ClearedTrap 169
This Trap is sent if calibration can be done .
TRAP-TYPE    

gnLSFPOkTrap 170
This Trap is sent every time a Gigabit ethernet SFP fault clears.
TRAP-TYPE    

gnEncryptionFaultClearedTrap 171
This Trap is sent every time a Encryption fault clears.
TRAP-TYPE    

gnEncryptionSyncLosClearedTrap 172
This Trap is sent every time a Encryption synchronization loss fault clears.
TRAP-TYPE    

gnEncryptionKepTimoutCleared 173
This Trap is sent every time a Encryption KEP timout fault clears.
TRAP-TYPE    

gnEncryptionSkTimerElapsedCleared 174
This Trap is sent every time a encryption Encryption Session Key Timer elapsed fault clears.
TRAP-TYPE    

gnEncryptionPowerUpSelfTestFailCleared 175
This Trap is sent every time a Encryption Power Up Self Test fault clears.
TRAP-TYPE    

gnEncryptionConditionalTestFailCleared 176
This Trap is sent every time a Encryption Conditional Test fault clears.
TRAP-TYPE    

gnEncryptionWillTurnOffOnNextRestCleared 177
This Trap is sent every time a Encryption will be turned off on the next reset clears.
TRAP-TYPE    

gnEncryptionEventReportCleared 178
This Trap is sent every time a Encryption event report fault clears.
TRAP-TYPE    

gnEncryptionTechCardWasDetectedCleared 179
This Trap is sent every time a Encryption Technician card is detected clears.
TRAP-TYPE    

gnAdminPasswordInDefaultStateCleared 180
This Trap is sent every time a admin password is in default state clears.
TRAP-TYPE    

gnLinkGroupingProtectionFaultClearedTrap 181
This Trap is sent in case the Link Grouping Protection Fault clears.
TRAP-TYPE    

gnLossOfProtectionClearedTrap 182
This Trap is sent in case the Loss of Protection clears.
TRAP-TYPE    

gnTempLicenseClearedTrap 183
This Trap is sent in case the Temp License Enable clears.
TRAP-TYPE    

gnMultiRadioProblemOKTrap 184
This Trap is sent every time a multi radio fault is cleared.
TRAP-TYPE    

gnRODUPowerFailTrap 210
This Trap is sent every time a Remote ODU Power fault occurs.
TRAP-TYPE    

gnRODUSynthUnLockTrap 211
This Trap is sent every time a Remote ODU Hardware fault occurs .
TRAP-TYPE    

gnRODUTxLevelOutOfRangeTrap 212
This Trap is sent every time a Remote ODU TX signal is out of range.
TRAP-TYPE    

gnRODURxLevelOutOfRangeTrap 213
This Trap is sent every time a Remote ODU RX signal is out of range.
TRAP-TYPE    

gnRODUExtremeTempTrap 214
This Trap is sent every time a Remote ODU extreme temperature event occurs.
TRAP-TYPE    

gnRIDUPowerFailTrap 215
This Trap is sent every time a Remote IDU Power fault occurs.
TRAP-TYPE    

gnRCableFaultTrap 216
This Trap is sent every time a Remote IDU-ODU cable fault occurs.
TRAP-TYPE    

gnRModemFailTrap 217
This Trap is sent every time a Remote Modem faults occurs.
TRAP-TYPE    

gnRIDUExtremeTempTrap 218
This Trap is sent every time a Remote IDU extreme temperature event occurs.
TRAP-TYPE    

gnRLoopbackOnTrap 219
This Trap is sent every time a Remote Loopback is activated.
TRAP-TYPE    

gnRRemoteCommFaultTrap 220
This Trap is sent every time the remote communication is disconnected.
TRAP-TYPE    

gnRTestRunningTrap 221
This Trap is sent every time a Remote SDH/SONET test is activated.
TRAP-TYPE    

gnRLOFTrap 222
This Trap is sent every time a Remote Loss of Frame alarm occurs.
TRAP-TYPE    

gnRLOSTrap 223
This Trap is sent every time a Remote Loss of signal alarm occurs.
TRAP-TYPE    

gnRTIMTrap 224
This Trap is sent every time a Remote Trace Identifier Mismatch alarm occurs.
TRAP-TYPE    

gnREXCTrap 225
This Trap is sent every time a Remote Excessive BER alarm is raised.
TRAP-TYPE    

gnRSDTrap 226
This Trap is sent every time a Remote Signal Degrade alarm is raised.
TRAP-TYPE    

gnRAisTrap 227
This Trap is sent every time the Remote terminal receives an Alarm Indication Signal (AIS).
TRAP-TYPE    

gnRUnExpTrap 228
This Trap is sent every time a Remote terminal receives an unexpected signal.
TRAP-TYPE    

gnRLocTrap 229
This Trap is sent every time a Remote Loss of Carrier (On the FE interfaces) alarm occurs.
TRAP-TYPE    

gnRLopTrap 230
This Trap is sent every time a Remote Loss of pointer alarm occurs.
TRAP-TYPE    

gnRRdiTrap 231
This Trap is sent every time the Remote terminal receives a Remote Defect Identifier signal (RDI).
TRAP-TYPE    

gnRSlmTrap 232
This Trap is sent every time a Remote Signal (Payload) Label Mismatch alarm occurs.
TRAP-TYPE    

gnRUnqTrap 233
This Trap is sent every time a Remote unequipped signal is received.
TRAP-TYPE    

gnRExternalAlarm1OnTrap 234
This Trap is sent every time a Remote External alarm 1 is raised.
TRAP-TYPE    

gnRExternalAlarm2OnTrap 235
This Trap is sent every time a Remote External alarm 2 is raised.
TRAP-TYPE    

gnRExternalAlarm3OnTrap 236
This Trap is sent every time a Remote External alarm 3 is raised.
TRAP-TYPE    

gnRExternalAlarm4OnTrap 237
This Trap is sent every time a Remote External alarm 4 is raised.
TRAP-TYPE    

gnRExternalAlarm5OnTrap 238
This Trap is sent every time a Remote External alarm 5 is raised.
TRAP-TYPE    

gnRExternalAlarm6OnTrap 239
This Trap is sent every time a Remote External alarm 6 is raised.
TRAP-TYPE    

gnRExternalAlarm7OnTrap 240
This Trap is sent every time a Remote External alarm 7 is raised.
TRAP-TYPE    

gnRExternalAlarm8OnTrap 241
This Trap is sent every time a Remote External alarm 8 is raised.
TRAP-TYPE    

gnRSystemFaultTrap 242
This Trap is sent every time a Remote System fault occurs.
TRAP-TYPE    

gnRTftpFaultTrap 243
This Trap is sent every time a Remote TFTP Download fails.
TRAP-TYPE    

gnRInternalDownloadFaultTrap 244
This Trap is sent every time a Remote internal Download fails.
TRAP-TYPE    

gnRIntralinkFaultTrap 245
This Trap is sent every time a Remote intra-link download fails.
TRAP-TYPE    

gnRConfMismatchTrap 246
This Trap is sent every time a Remote configuration mismatch fault occurs.
TRAP-TYPE    

gnRProtectSwitchFaultTrap 247
This Trap is sent every time a Remote Protection fault is raised.
TRAP-TYPE    

gnRProtectCableFaultTrap 248
This Trap is sent every time a Remote protection cable fault is raised.
TRAP-TYPE    

gnRHeartBeatTrap 249
This Trap is a periodic heart beat trap.
TRAP-TYPE    

gnRLomTrap 250
This Trap is sent every time a Remote Loss of Multi-frame alarm occurs.
TRAP-TYPE    

gnRHitlessRadioLofTrap 252
This Trap is sent every time a Remote Hitless RadioLOF fault occurs.
TRAP-TYPE    

gnRHitlessCableDisconnectTrap 253
This Trap is sent every time a Remote Hitless cable fault is raised.
TRAP-TYPE    

gnRODUPowerOkTrap 310
This Trap is sent every time a Remote ODU Power fault cleared.
TRAP-TYPE    

gnRODUSynthLockTrap 311
This Trap is sent every time a Remote ODU Hardware fault is cleared.
TRAP-TYPE    

gnRODUTxLevelInRangeTrap 312
This Trap is sent every time a Remote ODU TX signal is in range.
TRAP-TYPE    

gnRODURxLevelInRangeTrap 313
This Trap is sent every time a Remote ODU RX signal is in range.
TRAP-TYPE    

gnRODUNormalTempTrap 314
This Trap is sent every time a Remote ODU returns to normal temperature.
TRAP-TYPE    

gnRIDUPowerOkTrap 315
This Trap is sent every time a Remote IDU Power fault is cleared.
TRAP-TYPE    

gnRCableOkTrap 316
This Trap is sent every time a Remote IDU-ODU cable fault is cleared.
TRAP-TYPE    

gnRModemOkTrap 317
This Trap is sent every time a Remote Modem faults is cleared.
TRAP-TYPE    

gnRIDUNormalTempTrap 318
This Trap is sent every time a Remote IDU returns to normal temperature.
TRAP-TYPE    

gnRLoopbackOffTrap 319
This Trap is sent every time a Remote Loopback is cleared.
TRAP-TYPE    

gnRRemoteCommOkTrap 320
This Trap is sent every time the remote communication is re-connected.
TRAP-TYPE    

gnRNoTestRunningTrap 321
This Trap is sent every time a Remote SDH/SONET test is cleared.
TRAP-TYPE    

gnRNoLOFTrap 322
This Trap is sent every time a Remote Loss of Frame alarm is cleared.
TRAP-TYPE    

gnRNoLOSTrap 323
This Trap is sent every time a Remote Loss of Signal alarm is cleared.
TRAP-TYPE    

gnRNoTIMTrap 324
This Trap is sent every time a Remote Trace Identifier Mismatch alarm is cleared.
TRAP-TYPE    

gnRNoEXCTrap 325
This Trap is sent every time a Remote Excessive BER alarm is cleared.
TRAP-TYPE    

gnRNoSDTrap 326
This Trap is sent every time a Remote Signal Degrade alarm is cleared.
TRAP-TYPE    

gnRNoAisTrap 327
This Trap is sent every time the Remote terminal stops receiving an Alarm Indication Signal (AIS).
TRAP-TYPE    

gnRNoUnExpTrap 328
This Trap is sent every time a Remote terminal stops receiving an unexpected signal.
TRAP-TYPE    

gnRNoLocTrap 329
This Trap is sent every time a Remote Loss of Carrier (on the FE interfaces) alarm is cleared.
TRAP-TYPE    

gnRNoLopTrap 330
This Trap is sent every time a Remote Loss of pointer alarm is cleared.
TRAP-TYPE    

gnRNoRdiTrap 331
This Trap is sent every time the Remote terminal stops receiving a Remote Defect Identifier signal (RDI).
TRAP-TYPE    

gnRNoSlmTrap 332
This Trap is sent every time a Remote Signal (Payload) Label Mismatch alarm is cleared.
TRAP-TYPE    

gnRNoUnqTrap 333
This Trap is sent every time a Remote terminal start receiving an equipped signal.
TRAP-TYPE    

gnRExternalAlarm1OffTrap 334
This Trap is sent every time a Remote External alarm 1 is cleared.
TRAP-TYPE    

gnRExternalAlarm2OffTrap 335
This Trap is sent every time a Remote External alarm 2 is cleared.
TRAP-TYPE    

gnRExternalAlarm3OffTrap 336
This Trap is sent every time a Remote External alarm 3 is cleared.
TRAP-TYPE    

gnRExternalAlarm4OffTrap 337
This Trap is sent every time a Remote External alarm 4 is cleared.
TRAP-TYPE    

gnRExternalAlarm5OffTrap 338
This Trap is sent every time a Remote External alarm 5 is cleared.
TRAP-TYPE    

gnRExternalAlarm6OffTrap 339
This Trap is sent every time a Remote External alarm 6 is cleared.
TRAP-TYPE    

gnRExternalAlarm7OffTrap 340
This Trap is sent every time a Remote External alarm 7 is cleared.
TRAP-TYPE    

gnRExternalAlarm8OffTrap 341
This Trap is sent every time a Remote External alarm 8 is cleared.
TRAP-TYPE    

gnRSystemOkTrap 342
This Trap is sent every time a Remote System fault is cleared.
TRAP-TYPE    

gnRTftpOkTrap 343
This Trap is sent every time a Remote TFTP Download succeeded.
TRAP-TYPE    

gnRInternalDownloadOkTrap 344
This Trap is sent every time a Remoteinternal Download succeeded.
TRAP-TYPE    

gnRIntralinkOkTrap 345
This Trap is sent every time a Remote intra-link download succeeded.
TRAP-TYPE    

gnRNoConfMismatchTrap 346
This Trap is sent every time a Remote configuration mismatch fault is cleared.
TRAP-TYPE    

gnRProtectCableOkTrap 348
This Trap is sent every time a Remote protection cable fault is cleared.
TRAP-TYPE    

gnRLomOkTrap 350
This Trap is sent every time a Remote Loss of Multi-frame alarm is cleared.
TRAP-TYPE    

gnRHitlessRadioLofOKTrap 352
This Trap is sent every time a Remote Hitless RadioLOF fault is cleared.
TRAP-TYPE    

gnRHitlessCableDisconnectOKTrap 353
This Trap is sent every time a Remote Hitless cable fault is cleared.
TRAP-TYPE