CASCADE-MIB

File: CASCADE-MIB.mib (475199 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

enterprises IpAddress Counter
Gauge TimeTicks DisplayString
ifInErrors OBJECT-TYPE TRAP-TYPE

Defined Types

Index  
INTEGER    

AseEntry  
SEQUENCE    
  aseAddr IpAddress
  aseMask IpAddress
  aseDefaultGwAddr IpAddress
  aseMetricType INTEGER
  aseAdminStatus INTEGER
  aseIfIndex Index
  aseDlci INTEGER

NodeNMSEntry  
SEQUENCE    
  nodeNMSIndex Index
  nodeNMSIpAddr IpAddress

NodeFanEntry  
SEQUENCE    
  nodeFanIndex INTEGER
  nodeFanStatus INTEGER
  nodeFanSpeed Gauge

NodeConsoleEntry  
SEQUENCE    
  nodeConsoleIndex INTEGER
  nodeUserName OCTET STRING
  nodeUserFrom IpAddress
  nodeConsoleAccessMode INTEGER
  nodeConsoleUptime TimeTicks

NodeBillingEntry  
SEQUENCE    
  nodeBillingService INTEGER
  nodeBilling INTEGER
  nodeBillingAggrPeriod TimeTicks
  nodeBillingCurAggrPeriodStart TimeTicks
  nodeBillingCurAggrPeriodEnd TimeTicks
  nodeBillingCollection TimeTicks
  nodeBillingDailyProcessing INTEGER
  nodeBillingDPTime TimeTicks
  nodeBillingUsageRecOvflWarnings Counter
  nodeBillingTotalUsageRecOvflWarnings Counter
  nodeBillingBillableUsageEvents Counter
  nodeBillingNonBillableUsageEvents Counter
  nodeBillingUsageRecCreated Counter
  nodeBillingTotalUsageRecCreated Counter
  nodeBillingUsageRecCrFailures Counter
  nodeBillingTotalUsageRecCrFailures Counter
  nodeBillingUsageRecSent Counter
  nodeBillingTotalUsageRecSent Counter
  nodeBillingUsageDataStoreFull Counter
  nodeBillingTotalUsageDataStoreFull Counter
  nodeBillingAdminAction INTEGER

NodeRefclocksrcEntry  
SEQUENCE    
  nodeRefclocksrcIndex INTEGER
  nodeRefclocksrcPriority INTEGER
  nodeRefclocksrcType INTEGER
  nodeRefclocksrcSlotId INTEGER
  nodeRefclocksrcPportId INTEGER

NodeApplicationEntry  
SEQUENCE    
  nodeApplicationIndex Index
  nodeApplicationDescription DisplayString
  nodePrimaryVersion DisplayString
  nodeSecondaryVersion DisplayString

CardTypes  
INTEGER v35-6(1), ft1-1-24(2), fe1-1-30(3), uio-6(4), cp1(5), uio-8(6), ft1-4-24(7), fe1-4-30(8), ft3-1(9), fe3-1(10), hssi-2(11), dsx1-10(12), rs232-18(13), rs232-8(14), ut1-4-24(15), ue1-4-30(16), atmds3-1(17), atme3-1(18), pri-4(19), e1-pri-4(20), sft1-4-24(21), sut1-4-24(22), st1-pri-4(23), t1-atm(24), e1-atm(25), ads3-t3(26), ads3-e3(27), cbr-ds1-s-4(28), cbr-ds1-us-4(29), cbr-e1-s-4(30), cbr-e1-us-4(31), atmiwu-1(32), toc3-atm-4(33), tstm1-atm-4(34), sp-4(35), sp-8(36), atmcs-1(37), toc12-atm-1(38), tstm4-atm-1(39), ads1-t1(40), ads1-e1(41), ads1-j2(42), e1-12(43), bio1-4-16(44), bio1-oc3-4(45), bio1-oc12-1(46), bio1-oc12x4(47), bio1-oc48-1(48), np1(49), sf1(50), tm1(51), tfds3-t3-6(52), tfds3-e3-6(53), tfast-ether-4(54), fast-ether-2(55), ls-oc3-1(56), tcfds3-t3-6(57), tcfds3-e3-6(58), toc3-cfc-2(59), atmcs-e3-1(60), be1-atm-12(62), bt1-atm-12(63), bds3-1-0(64), gfether-4(65), gfds3-t3-6(66), gfds3-e3-6(67), gchn-ds3-4(68), g-server(69), sp-30(70), sp-40(71)    

CardStatuses  
INTEGER up(1), down(2), testing(3), maintenance(6), overtemp(7)    

CardEntry  
SEQUENCE    
  cardLogicalSlotId INTEGER
  cardPhysicalSlotId INTEGER
  cardAdminType CardTypes
  cardOperType CardTypes
  cardState INTEGER
  cardAdminStatus CardStatuses
  cardOperStatus CardStatuses
  cardDiagStatus INTEGER
  cardRedundConfig INTEGER
  cardRedundSlotMask INTEGER
  cardRedundActual INTEGER
  cardRedundState INTEGER
  cardToRedundant TimeTicks
  cardDiagNonFatalSource INTEGER
  cardDiagNonFatalTime TimeTicks
  cardDiagNonFatalErrMajor INTEGER
  cardDiagNonFatalErrMinor INTEGER
  cardDiagNonFatalStr DisplayString
  cardDiagFatalSource INTEGER
  cardDiagFatalTime TimeTicks
  cardDiagFatalErrMajor INTEGER
  cardDiagFatalErrMinor INTEGER
  cardDiagFatalStr DisplayString
  cardDiagFatalReboots Counter
  cardDiagFatalAddress INTEGER
  cardDiagBackgroundPasses Counter
  cardDiagBackgroundFailures Counter
  cardDiagBackgroundSuccesses Counter
  cardDiagLEDReset INTEGER
  cardDiagPowerExtensive INTEGER
  cardCpuUtil Gauge
  cardMemoryUsage Gauge
  cardMaxVCs Gauge
  cardInUseVCs Gauge
  cardFreeVCs Gauge
  cardInOctets Counter
  cardInPkts Counter
  cardOutOctets Counter
  cardOutPkts Counter
  cardToWarmboot TimeTicks
  cardToColdboot TimeTicks
  cardModel DisplayString
  cardSerial DisplayString
  cardSwRev DisplayString
  cardHwRev DisplayString
  cardEpromRev DisplayString
  cardName DisplayString
  cardCktGroupTrap OCTET STRING
  cardOutBtus Counter
  cardInGoodBtus Counter
  cardInErrorBtus Counter
  cardInNoVcBtus Counter
  cardInLinkDownBtus Counter
  cardInNoBufferBtus Counter
  cardInForwardBitBtus Counter
  cardDiagTestId INTEGER
  cardDiagTestRuns INTEGER
  cardDiagState INTEGER
  cardDiagOptionStr OCTET STRING
  cardDiagPasses Counter
  cardDiagFailures Counter
  cardDiagResultString DisplayString
  cardFrameMemoryUtil Gauge
  cardResetPram INTEGER
  cardMemoryUtil Gauge
  cardFrameMemoryUsage Gauge
  cardUpTime TimeTicks
  cardPramChecksum INTEGER
  cardPhysicalIndex INTEGER
  cardExternalClockRate INTEGER
  cardShootState INTEGER
  cardEraseAll INTEGER
  cardAdminCapability INTEGER
  cardOperCapability INTEGER
  cardISDNswtype INTEGER
  cardCpuFgUtil Gauge
  cardTrkProtState INTEGER
  cardISDNSigType INTEGER
  cardISDNChanId INTEGER
  cardTransmitClockConfig INTEGER
  cardTransmitClockSwitchOver INTEGER
  cardTransmitClockStatus INTEGER
  cardSystemPrimaryClockPortConfig INTEGER
  cardSystemPrimaryClockStatus INTEGER
  cardSystemSecondaryClockPortConfig INTEGER
  cardSystemSecondaryClockStatus INTEGER
  cardInCells Counter
  cardInErrorCells Counter
  cardInErrorVPIVCI Counter
  cardOutCells Counter
  cardOutDiscardCells Counter
  cardQOSQueueSize INTEGER
  cardLastErrorPort INTEGER
  cardLastErrorVPI INTEGER
  cardLastErrorVCI INTEGER
  cardSystemPrimaryClockModeConfig INTEGER
  cardSystemSecondaryClockModeConfig INTEGER
  cardNFBDEStatus INTEGER
  cardProductCode DisplayString
  cardMfgPN DisplayString
  cardTotalUpTime TimeTicks
  cardIOAType INTEGER
  cardIOAHwRev DisplayString
  cardIOASerial DisplayString
  cardIOAProductCode DisplayString
  cardIOAMfgPN DisplayString
  cardDS0Support INTEGER
  cardDiagParamId INTEGER
  cardDiagParamValue INTEGER
  cardBulkStatsPeakCapability INTEGER
  cardBulkStatsTotalCapability INTEGER
  cardBulkStatsPeakEnable INTEGER
  cardBulkStatsTotalEnable INTEGER
  cardBulkStatsBaseCollectPeriod INTEGER
  cardNrtsHwRev INTEGER
  cardNrtsOutCellBufSize INTEGER
  cardNrtsOperState INTEGER
  cardNrtsAdminState INTEGER
  cardNrtsCcrmProtocolId INTEGER
  cardNrtsBcmProtocolId INTEGER
  cardNrtsRmGenInterval INTEGER
  cardNrtsIdleCktThresh INTEGER
  cardNrtsVbrNrtManage INTEGER
  cardNrtsIcrFact INTEGER
  cardNrtsMcastDiscardThresh INTEGER
  cardNrtsMcastDiscardCount Counter
  cardAdminIOAType INTEGER
  cardNrtsMcastRate INTEGER
  cardMonStatus INTEGER
  cardImageSetA DisplayString
  cardImageSetB DisplayString
  cardMacAddress DisplayString
  cardFlashRev DisplayString
  cardRequiredCapabilityBitmask INTEGER
  cardOperCapabilityBitmask INTEGER
  cardDslModule OCTET STRING
  cardIPTableSize INTEGER
  cardIPTableState INTEGER
  cardATMTcaInBufOverflowAlertPeriod INTEGER
  cardATMTcaInBufOverflowThresh INTEGER
  cardATMTcaInInvalidVpiVciAlertPeriod INTEGER
  cardATMTcaInInvalidVpiVciThresh INTEGER
  cardATMTcaInATMDCFullAlertPeriod INTEGER
  cardATMTcaInATMDCFullThresh INTEGER
  cardATMTcaEnable INTEGER
  cardATMTcaId INTEGER
  cardATMTcaECidLookupFailureAlertPeriod INTEGER
  cardATMTcaECidLookupThresh INTEGER
  cardATMTcaSPPearlOCbrFailureAlertPeriod INTEGER
  cardATMTcaSPPearlOCbrThresh INTEGER
  cardATMTcaSPPearlOAbrFailureAlertPeriod INTEGER
  cardATMTcaSPPearlOAbrThresh INTEGER
  cardATMTcaSPPearlOVbr1FailureAlertPeriod INTEGER
  cardATMTcaSPPearlOVbr1Thresh INTEGER
  cardATMTcaSPPearlOVbr2FailureAlertPeriod INTEGER
  cardATMTcaSPPearlOVbr2Thresh INTEGER
  cardATMTcaSPPearlGCbrFailureAlertPeriod INTEGER
  cardATMTcaSPPearlGCbrThresh INTEGER
  cardATMTcaSPPearlGAbrFailureAlertPeriod INTEGER
  cardATMTcaSPPearlGAbrThresh INTEGER
  cardATMTcaSPPearlGVbr1FailureAlertPeriod INTEGER
  cardATMTcaSPPearlGVbr1Thresh INTEGER
  cardATMTcaSPPearlGVbr2FailureAlertPeriod INTEGER
  cardATMTcaSPPearlGVbr2Thresh INTEGER
  cardATMTcaSPEnable INTEGER
  cardSPEFCIEnable INTEGER
  cardSPClpEnable INTEGER
  spATMTcaId INTEGER
  cardSubcardToRedundant CardTypes
  cardMemory5Usage Gauge
  cardSF1OperStatus CardStatuses
  cardSF2OperStatus CardStatuses
  cardTM1OperStatus CardStatuses
  cardTM2OperStatus CardStatuses
  cardMemStartLog INTEGER
  cardMemLogLevel INTEGER
  cardMemClrLog INTEGER
  cardValidSubcards INTEGER
  cardClp0CbrThreshold INTEGER
  cardClp01CbrThreshold INTEGER
  cardClp0VbrRtThreshold INTEGER
  cardClp01VbrRtThreshold INTEGER
  cardClp0VbrNrtThreshold INTEGER
  cardClp01VbrNrtThreshold INTEGER
  cardClp0UAbrThreshold INTEGER
  cardClp01UAbrThreshold INTEGER
  cardControlMessagesFromBus Counter
  cardControlMessagesToBus Counter
  cardBTUsFromBus Counter
  cardBTUsToBus Counter
  cardInvalidPvcBTUs Counter
  cardIncompleteFramesFromBus Counter
  cardBTUsBusErrors Counter
  cardBTUsNoResource Counter
  cardInvalidPvcBTUsThreshold INTEGER
  cardIncompleteFramesFromBusThreshold INTEGER
  cardBTUsBusErrorThreshold INTEGER
  cardBTUsNoResourceThreshold INTEGER
  cardFrameMemoryThreshold INTEGER
  cardHoldQFrameMemory Counter
  cardTotalAAL5RxErrorCount Counter
  cardOperMemSize INTEGER

PportEntry  
SEQUENCE    
  pportSlotId INTEGER
  pportId INTEGER
  pportAdminType INTEGER
  pportNumLport INTEGER
  pportDataRate INTEGER
  pportType INTEGER
  pportRecvClock INTEGER
  pportXmitClock INTEGER
  pportAdminStatus INTEGER
  pportOperStatus INTEGER
  pportDs1LineType INTEGER
  pportDs1ZeroCoding INTEGER
  pportDs1LineBuildout INTEGER
  pportDiagTestId INTEGER
  pportDiagTestRuns INTEGER
  pportInOctets Counter
  pportInFrames Counter
  pportInDiscards Counter
  pportInErrors Counter
  pportOutOctets Counter
  pportOutFrames Counter
  pportOutDiscards Counter
  pportOutErrors Counter
  pportDiagState INTEGER
  pportDiagOptionStr OCTET STRING
  pportDiagPassCount INTEGER
  pportDiagFailCount INTEGER
  pportDiagResultStr DisplayString
  pportLinkDownReason INTEGER
  pportInterface INTEGER
  pportAdminInterface INTEGER
  pportCellScramble INTEGER
  pportCbitParity INTEGER
  pportMaxBufferSize INTEGER
  pportPeakCellRate0 INTEGER
  pportPeakCellRate1 INTEGER
  pportPeakCellRate2 INTEGER
  pportPeakCellRate3 INTEGER
  pportPeakCellRate4 INTEGER
  pportPeakCellRate5 INTEGER
  pportPeakCellRate6 INTEGER
  pportPeakCellRate7 INTEGER
  pportInCells INTEGER
  pportInErrorCells INTEGER
  pportOutCells INTEGER
  pportDs3LineBuildout INTEGER
  pportSetDS0LoopUp INTEGER
  pportSetDS0LoopDown INTEGER
  pportDS0LoopUpStatus INTEGER
  pportDS0LoopDownStatus INTEGER
  pportDS0LoopStatus INTEGER
  pportISDN INTEGER
  pportdsx3LoopbackConfig INTEGER
  pportdsx3SendCode INTEGER
  pportdsx3LoopStatus INTEGER
  pportdsx3FEACStatus INTEGER
  pportds1LoopbackConfig INTEGER
  pportds1SendCode INTEGER
  pportds1LoopStatus INTEGER
  pportSetClkBkup INTEGER
  pportAtmIdleWord INTEGER
  pportAtmDisCardMode INTEGER
  pportAtmLastUnconfiguredVpi INTEGER
  pportAtmLastUnconfiguredVci INTEGER
  pportAtmUnconfiguredCells Counter
  pportAtmNumBitsVCI INTEGER
  pportAtmNumBitsVPI INTEGER
  pportAtmInterfaceType INTEGER
  pportSonetSDHLoopbackConfig INTEGER
  pportSonetSDHLoopStatus INTEGER
  pportOutDiscardsCell Counter
  pportAtmPlcp INTEGER
  pportCbrTargetClockMode INTEGER
  pportCbrCurrentClockMode INTEGER
  pportClockMasterChannel INTEGER
  pportFibreType INTEGER
  pportLaserStatus INTEGER
  pportMaxActiveVpiBits INTEGER
  pportBipErrorsThresh INTEGER
  pportBipSectionErrors Counter
  pportBipLineErrors Counter
  pportBipPathErrors Counter
  pportFebeErrors Counter
  pportHcsErrors Counter
  pportHcsSevereErrors Counter
  pportCongestedReceivedCells Counter
  pportCongestedTransmittedCells Counter
  pportAtmLayerErroredReceivedCells Counter
  pportAtmLayerErroredTransmittedCells Counter
  pportDS0BitStuff INTEGER
  pportDS0BitErrorCount INTEGER
  pportDS0BitErrorFreeSeconds INTEGER
  pportDS0BitErroredSeconds INTEGER
  pportDS0MidspanRepeaters INTEGER
  pportDS0TestPatternSync INTEGER
  pportDS0InjectBitError INTEGER
  pportDS0FarendLpbkType INTEGER
  pportDS0LpbkMode INTEGER
  pportDS0SwitchLpbkStart INTEGER
  pportDS0SwitchLpbkEnd INTEGER
  pportDS0FarendDS0InLpbk INTEGER
  pportDS0SendTestTraffic INTEGER
  pportOc3LoopConfig INTEGER
  pportOc3LoopStatus INTEGER
  pportISDNIpBaseAddr IpAddress
  pportSonetSTM1Scramble INTEGER
  pportEFCIMarking INTEGER
  pportAtmQOSTransmitMode INTEGER
  pportHECMode INTEGER
  pportISDNChannelStatus OCTET STRING
  pportds1FarEndLoopStatus INTEGER
  pportds1FDLControl INTEGER
  pportds1FDLPrmXmit INTEGER
  pportds1FDLPidXmit INTEGER
  pportds1FDLXmitPid OCTET STRING
  pportds1FDLRcvPid OCTET STRING
  pportds1FDLRcvTsid OCTET STRING
  pportSonetSDHFramingMode INTEGER
  pportds1InbandLoopType INTEGER
  pportESFDataLinkStatus INTEGER
  pportPMTcaId INTEGER
  pportBchanTimerValue INTEGER
  pportAAL5CRC32Error Counter
  pportAAL5CPIError Counter
  pportAAL5LengthError Counter
  pportAAL5ReassemblyTimerError Counter
  pportAAL5MaxNrSegError Counter
  pportRedundancyArch INTEGER
  pportAPSadminDir INTEGER
  pportAPSlineType INTEGER
  pportAPSrevertiveMode INTEGER
  pportAPSpairedSlotId INTEGER
  pportAPSpairedPportId INTEGER
  pportAPSsfBerThresh INTEGER
  pportAPSsdBerThresh INTEGER
  pportAPSwtrPeriod INTEGER
  pportAPSprotectionLineState INTEGER
  pportAPSxCommand INTEGER
  pportAPSconfigStatus INTEGER
  pportAPSOperRxStatus INTEGER
  pportBertPattern INTEGER
  pportBertUserBytes INTEGER
  pportBertErrorRate INTEGER
  pportBertCommand INTEGER
  pportBertStatus INTEGER
  pportBertBitCount Gauge
  pportBertErrorCount Gauge
  pportds1FELoopbackControl INTEGER
  pportFT1DS0s DisplayString
  pportIMUXCnt INTEGER
  pportds1PMConfigThresh INTEGER
  pportIdleCellType INTEGER
  pportATMTcaInHECErrorUAlertPeriod INTEGER
  pportATMTcaInHECErrorUThresh INTEGER
  pportATMTcaEBufOverflowCBRAlertPeriod INTEGER
  pportATMTcaEBufOverflowCBRThresh INTEGER
  pportATMTcaEBufOverflowABRAlertPeriod INTEGER
  pportATMTcaEBufOverflowABRThresh INTEGER
  pportATMTcaEBufOverflowVBR1AlertPeriod INTEGER
  pportATMTcaEBufOverflowVBR1Thresh INTEGER
  pportATMTcaEBufOverflowVBR2AlertPeriod INTEGER
  pportATMTcaEBufOverflowVBR2Thresh INTEGER
  pportATMTcaInFramerFIFOOverflowAlertPeriod INTEGER
  pportATMTcaInFramerFIFOOverflowThresh INTEGER
  pportATMTcaELookupFailureAlertPeriod INTEGER
  pportATMTcaELookupFailureThresh INTEGER
  pportATMTcaEnable INTEGER
  pportATMTcaId INTEGER
  pportFethAdminMacAddr OCTET STRING
  pportFethOperMacAddr OCTET STRING
  pportConfigAlarmSoakTime INTEGER
  pportConfigAlarmClearTime INTEGER
  pportFethPortCapability INTEGER
  pportVpshapingDiscardCellCount INTEGER

PportTrafficShaperEntry  
SEQUENCE    
  pportTrafficShaperIndex INTEGER
  pportTrafficShaperPriority INTEGER
  pportTrafficShaperCellRatioDividend INTEGER
  pportTrafficShaperCellRatioDivisor INTEGER
  pportTrafficShaperPeak INTEGER
  pportTrafficShaperCredit INTEGER

LportEntry  
SEQUENCE    
  lportIfIndex Index
  lportSlotId INTEGER
  lportPportId INTEGER
  lportId INTEGER
  lportLink INTEGER
  lportProtocol INTEGER
  lportSignal INTEGER
  lportFt1Ds0s OCTET STRING
  lportGlobalDlci INTEGER
  lportDlcmiStd INTEGER
  lportDlciAddrFmt INTEGER
  lportDlciAddrLen INTEGER
  lportMaxFramesize INTEGER
  lportDceVerifTimer INTEGER
  lportDceErrorThresh INTEGER
  lportDceEventCount INTEGER
  lportDteErrorThresh INTEGER
  lportDteEventCount INTEGER
  lportDtePollTimer INTEGER
  lportDteFullCounter INTEGER
  lportDteMulticast INTEGER
  lportTrkRnode IpAddress
  lportTrkRlport INTEGER
  lportCongestState INTEGER
  lportQP1Len INTEGER
  lportQP2Len INTEGER
  lportQP3Len INTEGER
  lportQP4Len INTEGER
  lportErrTime TimeTicks
  lportErrType INTEGER
  lportErrData OCTET STRING
  lportDiagTestId INTEGER
  lportDiagTestRuns INTEGER
  lportDataRate INTEGER
  lportTrkStatus INTEGER
  lportSevCongests INTEGER
  lportAbsCongests INTEGER
  lportTrkOverhead INTEGER
  lportTrkUtil INTEGER
  lportVAvailbw INTEGER
  lportTrkLastTimeChange TimeTicks
  lportCongestRate INTEGER
  lportCongestRateThresh INTEGER
  lportDiagState INTEGER
  lportDiagOptionStr OCTET STRING
  lportDiagPassCount INTEGER
  lportDiagFailCount INTEGER
  lportDiagResultStr DisplayString
  lportDs0BitStuff INTEGER
  lportErrorThreshold INTEGER
  lportUnsyncBandwidth INTEGER
  lportDTEInStatusFrames Counter
  lportDTEInFullStatusFrames Counter
  lportDTEInAsyncStatusFrames Counter
  lportDTEInErrorFrames Counter
  lportDTEOutPollFrames Counter
  lportDTEPollErrorCounts Counter
  lportDTEFailCounts Counter
  lportDTEFailReason INTEGER
  lportDTEOperStatus INTEGER
  lportDCEInPollFrames Counter
  lportDCEInErrorFrames Counter
  lportDCEOutStatusFrames Counter
  lportDCEOutFullStatusFrames Counter
  lportDCEOutAsyncStatusFrames Counter
  lportDCEPollErrorCounts Counter
  lportDCEFailCounts Counter
  lportDCEFailReason INTEGER
  lportDCEOperStatus INTEGER
  lportDCEOperDlcmiStd INTEGER
  lportLMIInErrorFrames Counter
  lportDCEnN4 INTEGER
  lportDCEnT3 INTEGER
  lportXmitLatencyThreshold INTEGER
  lportXmitRefillPriority0Percentage INTEGER
  lportXmitRefillPriority1Percentage INTEGER
  lportXmitRefillPriority2Percentage INTEGER
  lportXmitRefillPriority3Percentage INTEGER
  lportXmitDiscardLow INTEGER
  lportSevereThreshold INTEGER
  lportMildThreshold INTEGER
  lportTrkKeepAliveTimer INTEGER
  lportTrkKeepAliveErrorThreshold INTEGER
  lportIgCutThruStatus INTEGER
  lportEgCutThruStatus INTEGER
  lportEgCutThruThresh INTEGER
  lportFrameRelayTrkEnable INTEGER
  lportSmdsSsiIf INTEGER
  lportSmdsSsiSlot INTEGER
  lportSmdsScrnId INTEGER
  lportSmdsIaScrnOp INTEGER
  lportSmdsGaScrnOp INTEGER
  lportSmdsIaScrnMap OCTET STRING
  lportSmdsGaScrnMap OCTET STRING
  lportSmdsTrkAddr OCTET STRING
  lportSmdsCrc INTEGER
  lportSmdsCpePoll INTEGER
  lportSmdsPduCheck INTEGER
  lportSmdsCntOutFrDxi2HbPolls Counter
  lportSmdsCntOutByteDxi2HbPolls Counter
  lportSmdsCntInFrDxi2HbPolls Counter
  lportSmdsCntInByteDxi2HbPolls Counter
  lportSmdsCntOutFrSip3s Counter
  lportSmdsCntOutByteSip3s Counter
  lportSmdsCntInFrSip3s Counter
  lportSmdsCntInByteSip3s Counter
  lportSmdsCntDxi2LinkIdInvalids Counter
  lportSmdsCntDxi2StationIdInvalids Counter
  lportSmdsCntDxi2CrInvalids Counter
  lportSmdsCntDxi2AeInvalids Counter
  lportSmdsCntDxi2CtrlInvalids Counter
  lportSmdsCntDxi2FrameSizeErrors Counter
  lportSmdsCntSip3RsvdInvalids Counter
  lportSmdsCntSip3BetagMismatchs Counter
  lportSmdsCntSip3BasizeIncorrects Counter
  lportSmdsCntSip3BasizeInvalids Counter
  lportSmdsCntSip3DaTypeInvalids Counter
  lportSmdsCntSip3DaInvalids Counter
  lportSmdsCntSip3SaTypeInvalids Counter
  lportSmdsCntSip3SaInvalids Counter
  lportSmdsCntSip3BasizeMismatchs Counter
  lportSmdsCntSip3HeLenInvalids Counter
  lportSmdsCntSip3HeVersionInvalids Counter
  lportSmdsCntSip3HeCarrierInvalids Counter
  lportSmdsCntSip3Crc32Errors Counter
  lportSmdsCntSip3TRsvdInvalids Counter
  lportSmdsCntSaNotFounds Counter
  lportSmdsCntSaValidationFails Counter
  lportSmdsCntSaDaOnSamePorts Counter
  lportSmdsCntDaSsiMismacths Counter
  lportSmdsCntSsiProvisionErrors Counter
  lportSmdsCntDstIaNotFounds Counter
  lportSmdsCntDstGaNotFounds Counter
  lportSmdsCntSrcIaScrnFails Counter
  lportSmdsCntDstIaScrnFails Counter
  lportSmdsCntDstGaScrnFails Counter
  lportSmdsTotalDiscards Counter
  lportSmdsSsiNode INTEGER
  lportBilling INTEGER
  lportSmdsReserved144 INTEGER
  lportLinkStatus INTEGER
  lportLMIDelay INTEGER
  lportCRC INTEGER
  lportSmdsMulticastGa OCTET STRING
  lportSmdsMulticastIpAddr IpAddress
  lportAtmVPI INTEGER
  lportAtmVCI INTEGER
  lportPeakCellRateindex INTEGER
  lportSustCellRate INTEGER
  lportBurstTolerance INTEGER
  lportBuTrkOnFailure INTEGER
  lportTrkFailureThrsh INTEGER
  lportTrkRestThrsh INTEGER
  lportBuTrkRetryInt INTEGER
  lportBuTrkRetryNum INTEGER
  lportBuTrkCycleInt INTEGER
  lportTrkManualBu INTEGER
  lportPrimTrk Index
  lportInitCallSetup INTEGER
  lportBuFailReason INTEGER
  lportQ922Enable INTEGER
  lportQ922State INTEGER
  lportTrkPduRevision INTEGER
  lportPVCMgrPduRevision INTEGER
  lportDS0LoopStatus INTEGER
  lportISDNDuration INTEGER
  lportISDNSourceAddr OCTET STRING
  lportISDNDestAddr OCTET STRING
  lportISDNIpAddr IpAddress
  lportISDNCallRejCause INTEGER
  lportLastInvalidDLCI INTEGER
  lportTrkProtState INTEGER
  lportTrkTrafficMix INTEGER
  lportNumVC INTEGER
  lportTrkAdminCost INTEGER
  lportPrivateNet INTEGER
  lportTrkStaticDelay INTEGER
  lportTrkDynamicDelay INTEGER
  lportAtmDataRateQoS1 INTEGER
  lportAtmDataRateQoS2 INTEGER
  lportAtmDataRateQoS3 INTEGER
  lportAtmDataRateQoS4 INTEGER
  lportOutVAvailbwQoS1 INTEGER
  lportOutVAvailbwQoS2 INTEGER
  lportOutVAvailbwQoS3 INTEGER
  lportOutVAvailbwQoS4 INTEGER
  lportInVAvailbwQoS1 INTEGER
  lportInVAvailbwQoS2 INTEGER
  lportInVAvailbwQoS3 INTEGER
  lportInVAvailbwQoS4 INTEGER
  lportOutAllocbwQoS1 INTEGER
  lportOutAllocbwQoS2 INTEGER
  lportOutAllocbwQoS3 INTEGER
  lportOutAllocbwQoS4 INTEGER
  lportInAllocbwQoS1 INTEGER
  lportInAllocbwQoS2 INTEGER
  lportInAllocbwQoS3 INTEGER
  lportInAllocbwQoS4 INTEGER
  lportDynamicQoSbw INTEGER
  lportSVCRetryTimer INTEGER
  lportAtmNetworkType INTEGER
  lportAtmRouteMetricQoS1 INTEGER
  lportAtmRouteMetricQoS2 INTEGER
  lportAtmRouteMetricQoS3 INTEGER
  lportAtmRouteMetricQoS4 INTEGER
  lportIlmiPollTimeout INTEGER
  lportAtmProtocol INTEGER
  lportIlmiAdminStatus INTEGER
  lportIlmiOperStatus INTEGER
  lportIlmiPollRetry Counter
  lportAtmVpiBits INTEGER
  lportAtmVciBits INTEGER
  lportAtmOamAlarmEnable INTEGER
  lportInVAvailbw INTEGER
  lportbwUNIPolicy INTEGER
  lportStarvation INTEGER
  lportRecOverflow INTEGER
  lportLossOfCellSequence INTEGER
  lportLossOfStructurePointer INTEGER
  lportCbrInsDummyCells Counter
  lportRecFifoUnderflowCnt Counter
  lportRecFifoOverflowCnt Counter
  lportCbrLossOfStructurePointerCnt Counter
  lportCbrLossOfCellSequenceCnt Counter
  lportShaperId INTEGER
  lportIlmiPrefixScreenMode INTEGER
  lportSmdsPduViolTca INTEGER
  lportSmdsPduViolThresh INTEGER
  lportSmdsPduHdrSip3SaNotFound OCTET STRING
  lportSmdsPduHdrSip3SaDaOnSamePort OCTET STRING
  lportSmdsPduHdrSip3DstGaNotFound OCTET STRING
  lportSmdsPduHdrSip3DstIaScrnFail OCTET STRING
  lportSmdsPduHdrSip3SaValFail OCTET STRING
  lportSmdsPduHdrSip3DstIaNotFound OCTET STRING
  lportSmdsPduHdrSip3SrcIaScrnFail OCTET STRING
  lportSmdsPduHdrSip3DstGaScrnFail OCTET STRING
  lportSmdsPduHdrSip3SaTypeInvalid OCTET STRING
  lportSmdsPduHdrSip3DaTypeInvalid OCTET STRING
  lportSmdsPduHdrDxi2LinkIdInvalid OCTET STRING
  lportSmdsPduHdrDxi2CrInvalid OCTET STRING
  lportSmdsPduHdrDxi2CtrlInvalid OCTET STRING
  lportSmdsPduHdrDxi2StationIdInvalid OCTET STRING
  lportSmdsPduHdrDxi2AeInvalid OCTET STRING
  lportDS0FarendLpbkEnabled INTEGER
  lportDS0FarendLpbkDisabled INTEGER
  lportTrkProtFailureThreshold INTEGER
  lportPtr OCTET STRING
  lportISDNPoolUtil INTEGER
  lportISDNIpAddrAssignFail INTEGER
  lportTrkUtilQoS1 INTEGER
  lportTrkUtilQoS2 INTEGER
  lportTrkUtilQoS3 INTEGER
  lportTrkUtilQoS4 INTEGER
  lportInCells Counter
  lportOutCells Counter

CktEntry  
SEQUENCE    
  cktSrcIfIndex Index
  cktSrcDlci INTEGER
  cktPriority INTEGER
  cktCir INTEGER
  cktBc INTEGER
  cktBe INTEGER
  cktDestNodeId INTEGER
  cktDestIfIndex INTEGER
  cktDestDlci INTEGER
  cktTos INTEGER
  cktOde INTEGER
  cktAdminStatus INTEGER
  cktCreationTime TimeTicks
  cktLastTimeChange TimeTicks
  cktVcState INTEGER
  cktDceState INTEGER
  cktDteStatus INTEGER
  cktRnr INTEGER
  cktNiDown INTEGER
  cktDteState INTEGER
  cktOperStatus INTEGER
  cktOutForward INTEGER
  cktRerouteCnt INTEGER
  cktVcPtr OCTET STRING
  cktHopCnt INTEGER
  cktPath OCTET STRING
  cktFailReason INTEGER
  cktFailNode INTEGER
  cktFailPort INTEGER
  cktMcastGroupId INTEGER
  cktMcastMemberList OCTET STRING
  cktMcastParentGroups OCTET STRING
  cktInFrames Counter
  cktInDEFrames Counter
  cktInODEFrames Counter
  cktInFECNFrames Counter
  cktInBECNFrames Counter
  cktInDiscards Counter
  cktInOctets Counter
  cktInDEOctets Counter
  cktInODEOctets Counter
  cktOutFrames Counter
  cktOutDEFrames Counter
  cktOutODEFrames Counter
  cktOutFECNFrames Counter
  cktOutBECNFrames Counter
  cktOutOctets Counter
  cktOutDEOctets Counter
  cktOutODEOctets Counter
  cktOutLostFrames Counter
  cktOutLostDEFrames Counter
  cktOutLostODEFrames Counter
  cktOutLostOctets Counter
  cktOutLostDEOctets Counter
  cktOutLostODEOctets Counter
  cktRtMinDelay INTEGER
  cktRtMaxDelay INTEGER
  cktRtAvgDelay INTEGER
  cktDiagTestId INTEGER
  cktDiagTestRuns INTEGER
  cktHelloCounter INTEGER
  cktHelloAckCounter INTEGER
  cktDefinedPath OCTET STRING
  cktDefinedPathCount INTEGER
  cktDefinedPathEnable INTEGER
  cktDefinedPathAltOption INTEGER
  cktUsingDefinedPath INTEGER
  cktTryAltPath INTEGER
  cktNotVirgin INTEGER
  cktInForward INTEGER
  cktBtusSeg INTEGER
  cktInSegmentsDiscards Counter
  cktAtmVPI INTEGER
  cktAtmVCI INTEGER
  cktType INTEGER
  cktSvcCallingParty OCTET STRING
  cktSvcCalledParty OCTET STRING
  cktSvcDuration TimeTicks
  cktSvcCause INTEGER
  cktXlatFlag INTEGER
  cktDestLaddr INTEGER
  cktSrcLaddr INTEGER
  cktLoop INTEGER
  cktRerouteBalance INTEGER
  cktCallingBackup INTEGER
  cktRCir INTEGER
  cktAtmQoS INTEGER
  cktAtmInCells Counter
  cktAtmOutCells Counter
  cktAtmInDiscardedClp0Cells Counter
  cktAtmInDiscardedClp1Cells Counter
  cktAtmVcType INTEGER
  cktAtmPCR INTEGER
  cktAtmSCR INTEGER
  cktAtmMBS INTEGER
  cktAtmInPassedClp0Cells Counter
  cktAtmInPassedClp1Cells Counter
  cktAtmInTaggedCells Counter
  cktAtmOutClp0Cells Counter
  cktAtmOutClp1Cells Counter
  cktAtmRQoS INTEGER
  cktAtmTfdType INTEGER
  cktAtmRTfdType INTEGER
  cktAtmTfdParam1 INTEGER
  cktAtmTfdParam2 INTEGER
  cktAtmTfdParam3 INTEGER
  cktAtmRTfdParam1 INTEGER
  cktAtmRTfdParam2 INTEGER
  cktAtmRTfdParam3 INTEGER
  cktAtmFrameIWF INTEGER
  cktAtmUserPlane INTEGER
  cktRBc INTEGER
  cktRBe INTEGER
  cktOamLoopbackDirection INTEGER
  cktOamLoopbackType INTEGER
  cktOamLoopbackHops INTEGER
  cktOamLoopbackCount INTEGER
  cktOamLoopbackReceived Counter
  cktOamLoopbackTimeouts Counter
  cktOamLoopbackReceivedHigh INTEGER
  cktOamLoopbackReceivedLow INTEGER
  cktOamLoopbackReceivedAvg INTEGER
  cktOamAlarmDisable INTEGER
  cktShaperId INTEGER
  cktOspfCtd INTEGER
  cktOspfCdv INTEGER
  cktOutPort INTEGER
  cktOutVc INTEGER
  cktRVc INTEGER
  cktEntryType INTEGER
  cktDiagStr OCTET STRING
  cktSvcAalType INTEGER
  cktSvcBBearerClass INTEGER
  cktSvcBBearerClippingSusc INTEGER
  cktSvcBBearerTmgReq INTEGER
  cktSvcBBearerTfcType INTEGER
  cktAtmUPCEnable INTEGER
  cktRPriority INTEGER
  cktRtPriority INTEGER
  cktDeltaBc INTEGER
  cktDeltaBe INTEGER
  cktDeltaRBc INTEGER
  cktDeltaRBe INTEGER
  cktRedFrPcnt INTEGER
  cktRedFrRPcnt INTEGER
  cktRateEnforceSchm INTEGER
  cktRateEnforceRSchm INTEGER
  cktROde INTEGER
  cktPrivateNet INTEGER
  cktPrivateNetOverflow INTEGER
  cktCustomerID INTEGER
  cktAtmCDVT INTEGER
  cktNdcEnable INTEGER
  cktInterworkingFrToAtmCLP INTEGER
  cktInterworkingFrToAtmDe INTEGER
  cktNrtsCLP1 INTEGER
  cktNrtsDiscardClp0 Counter
  cktNrtsDiscardClp1 Counter
  cktMPEnableAMF INTEGER
  cktMPEligible INTEGER
  cktMPForcedCaller INTEGER
  cktMPForcedCallee INTEGER
  cktFrameSize INTEGER
  cktRFrameSize INTEGER
  cktRNrtsCLP1 INTEGER
  cktBBearerAtmTransferCapability INTEGER
  cktAtmFrameDiscard INTEGER
  cktRAtmFrameDiscard INTEGER
  cktAbrFRMRTT INTEGER
  cktAbrICR INTEGER
  cktRAbrICR INTEGER
  cktAbrRIF INTEGER
  cktRAbrRIF INTEGER
  cktAbrRDF INTEGER
  cktRAbrRDF INTEGER
  cktAbrTBE INTEGER
  cktRAbrTBE INTEGER
  cktAbrNRM INTEGER
  cktRAbrNRM INTEGER
  cktAbrTRM INTEGER
  cktRAbrTRM INTEGER
  cktAbrCDF INTEGER
  cktRAbrCDF INTEGER
  cktAbrADTF INTEGER
  cktRAbrADTF INTEGER
  cktAccumCTD INTEGER
  cktAccumCDV INTEGER
  cktAccumRCDV INTEGER
  cktCLR INTEGER
  cktRCLR INTEGER
  cktAtmLijId INTEGER
  cktAtmLijType INTEGER
  cktRtLastDelay INTEGER
  cktRtAccuMinDelay INTEGER
  cktRtAccuMaxDelay INTEGER
  cktRtAccuAvgDelay INTEGER
  cktQosIntPeriod INTEGER
  cktAtmOutOAMClp0Cells Counter
  cktAtmOutOAMClp1Cells Counter
  cktReqCTD INTEGER
  cktInOctetsPeak Counter
  cktOutOctetsPeak Counter
  cktInDEOctetsPeak Counter
  cktOutDEOctetsPeak Counter
  cktInODEOctetsPeak Counter
  cktOutODEOctetsPeak Counter
  cktAdminCostThreshold INTEGER
  cktAtmSvcServiceCategory INTEGER
  cktAtmSvcRServiceCategory INTEGER
  cktInterworkingFrToAtmEFCI INTEGER
  cktDiagSARMon INTEGER
  cktAdminCostReal INTEGER
  cktAtmInClp0Cells Counter
  cktAtmInClp1Cells Counter
  cktATMAAL5CRC32Error Counter
  cktATMAAL5CPIError Counter
  cktATMAAL5LengthError Counter
  cktATMAAL5ReassemblyTimerError Counter
  cktATMAAL5MaxNrSegError Counter
  cktIWF1490to1483Error Counter
  cktIWF1490to1483LastBadHeader DisplayString
  cktIWF1483to1490Error Counter
  cktIWF1483to1490LastBadHeader DisplayString

CktLeafEntry  
SEQUENCE    
  cktLeafSrcIfIndex Index
  cktLeafSrcDlci INTEGER
  cktLeafEndpointIndex INTEGER
  cktLeafCreationTime TimeTicks
  cktLeafEgressIfIndex Index
  cktLeafEgressDlci INTEGER
  cktLeafDestNodeId INTEGER
  cktLeafDestIfIndex Index
  cktLeafDestDlci INTEGER
  cktLeafSvcCallingParty OCTET STRING
  cktLeafSvcCalledParty OCTET STRING
  cktLeafAdminStatus INTEGER
  cktLeafVcState INTEGER
  cktLeafOperStatus INTEGER
  cktLeafDceState INTEGER
  cktLeafDteStatus INTEGER
  cktLeafDteState INTEGER
  cktLeafVcPtr OCTET STRING
  cktLeafHopCnt INTEGER
  cktLeafPath OCTET STRING
  cktLeafFailReason INTEGER
  cktLeafFailNode INTEGER
  cktLeafFailPort INTEGER
  cktLeafHelloCounter INTEGER
  cktLeafHelloAckCounter INTEGER
  cktLeafAtmVPI INTEGER
  cktLeafAtmVCI INTEGER
  cktLeafType INTEGER
  cktLeafAtmInCells Counter
  cktLeafAtmOutCells Counter
  cktLeafAtmInDiscardedClp0Cells Counter
  cktLeafAtmInDiscardedClp1Cells Counter
  cktLeafAtmInPassedClp0Cells Counter
  cktLeafAtmInPassedClp1Cells Counter
  cktLeafAtmInTaggedCells Counter
  cktLeafAtmOutClp0Cells Counter
  cktLeafAtmOutClp1Cells Counter

CktSmdsRtEntry  
SEQUENCE    
  cktSmdsRemoteNode INTEGER
  cktSmdsHopCnt INTEGER
  cktSmdsRoute OCTET STRING
  cktSmdsLocalPort INTEGER
  cktSmdsRemotePort INTEGER
  cktSmdsVcState INTEGER

Dsx1ConfigEntry  
SEQUENCE    
  dsx1SlotId INTEGER
  dsx1PortId INTEGER
  dsx1TimeElapsed INTEGER
  dsx1ValidIntervals INTEGER
  dsx1LineType INTEGER
  dsx1LineCoding INTEGER
  dsx1SendCode INTEGER
  dsx1CircuitIdentifier DisplayString
  dsx1LoopbackConfig INTEGER
  dsx1LineStatus INTEGER
  dsx1SignalMode INTEGER
  dsx1TransmitClockSource INTEGER
  dsx1Fdl INTEGER
  dsx1FdlVersion INTEGER

Dsx1CurrentEntry  
SEQUENCE    
  dsx1CurrentSlotId INTEGER
  dsx1CurrentPortId INTEGER
  dsx1CurrentESs Gauge
  dsx1CurrentSESs Gauge
  dsx1CurrentSEFSs Gauge
  dsx1CurrentUASs Gauge
  dsx1CurrentCSSs Gauge
  dsx1CurrentBESs Gauge

Dsx1IntervalEntry  
SEQUENCE    
  dsx1IntervalSlotId INTEGER
  dsx1IntervalPortId INTEGER
  dsx1IntervalNumber INTEGER
  dsx1IntervalESs Gauge
  dsx1IntervalSESs Gauge
  dsx1IntervalSEFSs Gauge
  dsx1IntervalUASs Gauge
  dsx1IntervalCSSs Gauge
  dsx1IntervalBESs Gauge

Dsx1TotalEntry  
SEQUENCE    
  dsx1TotalSlotId INTEGER
  dsx1TotalPortId INTEGER
  dsx1TotalESs Gauge
  dsx1TotalSESs Gauge
  dsx1TotalSEFSs Gauge
  dsx1TotalUASs Gauge
  dsx1TotalCSSs Gauge
  dsx1TotalBESs Gauge

SmdsaddrEntry  
SEQUENCE    
  smdsaddrAddr OCTET STRING
  smdsaddrType INTEGER
  smdsaddrId INTEGER
  smdsaddrIf INTEGER
  smdsaddrParentGrpMap OCTET STRING
  smdsaddrParentScrnMap OCTET STRING
  smdsaddrMemberAddrMap OCTET STRING
  smdsaddrAdminStatus INTEGER
  smdsaddrSlot INTEGER
  smdsaddrSsiIfNum INTEGER

IsdnAddrEntry  
SEQUENCE    
  isdnAddrIf INTEGER
  isdnAddr OCTET STRING
  isdnChanType INTEGER

IsdnCallerIDEntry  
SEQUENCE    
  isdnCallerIDIf INTEGER
  isdnCallerIDAddr OCTET STRING
  isdnCallerAdminStatus INTEGER

NamebindingEntry  
SEQUENCE    
  nameType INTEGER
  nameName OCTET STRING
  namePrimary INTEGER
  nameIfIndex INTEGER
  nameNodeId INTEGER
  nameStatus INTEGER

SvcNodePrefixEntry  
SEQUENCE    
  svcNodePrefixPrefix OCTET STRING
  svcNodePrefixNumBits INTEGER
  svcNodePrefixNmbPlan INTEGER
  svcNodePrefixAdminStatus INTEGER

SvcPrefixEntry  
SEQUENCE    
  svcPrefixIfIndex Index
  svcPrefixPrefix OCTET STRING
  svcPrefixNumBits INTEGER
  svcPrefixNmbPlan INTEGER
  svcPrefixAdminCost INTEGER
  svcPrefixLocalGatewayAddress OCTET STRING
  svcPrefixLocalGatewayNmbPlan INTEGER
  svcPrefixRemoteGatewayAddress OCTET STRING
  svcPrefixRemoteGatewayNmbPlan INTEGER
  svcPrefixAdminStatus INTEGER

SvcAddrEntry  
SEQUENCE    
  svcAddrIfIndex Index
  svcAddrAddress OCTET STRING
  svcAddrNmbPlan INTEGER
  svcAddrAdminStatus INTEGER

SvcAtmUserPartEntry  
SEQUENCE    
  svcAtmUserPartIfIndex Index
  svcAtmUserPartUserPart OCTET STRING
  svcAtmUserPartAdminStatus INTEGER

SvcConfigEntry  
SEQUENCE    
  svcConfigIfIndex Index
  svcConfigInitiateIdentStatsUpload IpAddress
  svcConfigCgPtyInsertionMode INTEGER
  svcConfigCgPtyInsertionAddress OCTET STRING
  svcConfigCgPtyInsertionNmbPlan INTEGER
  svcConfigCgPtyScreenMode INTEGER
  svcConfigEgressAddrXlateMode INTEGER
  svcConfigIngressAddrXlateMode INTEGER
  svcConfigCgPtyPresentationMode INTEGER

SvcAtmConfigEntry  
SEQUENCE    
  svcAtmConfigIfIndex Index
  svcAtmConfigAdminStatus INTEGER
  svcAtmConfigOperStatus INTEGER
  svcAtmConfigQ93bMaxRestart INTEGER
  svcAtmConfigQ93bMaxStatEnq INTEGER
  svcAtmConfigQ93bT303 INTEGER
  svcAtmConfigQ93bT308 INTEGER
  svcAtmConfigQ93bT309 INTEGER
  svcAtmConfigQ93bT310 INTEGER
  svcAtmConfigQ93bT313 INTEGER
  svcAtmConfigQ93bT316 INTEGER
  svcAtmConfigQ93bT322 INTEGER
  svcAtmConfigQ93bT398 INTEGER
  svcAtmConfigQ93bT399 INTEGER
  svcAtmConfigQ93bTotalConns Counter
  svcAtmConfigQ93bActiveConns Counter
  svcAtmConfigQ93bLastCauseTx INTEGER
  svcAtmConfigQ93bLastCauseRx INTEGER
  svcAtmConfigQ93bNumSetupPduTx Counter
  svcAtmConfigQ93bNumSetupPduRx Counter
  svcAtmConfigQ93bNumCallProcPduTx Counter
  svcAtmConfigQ93bNumCallProcPduRx Counter
  svcAtmConfigQ93bNumConnectPduTx Counter
  svcAtmConfigQ93bNumConnectPduRx Counter
  svcAtmConfigQ93bNumConnectAckPduTx Counter
  svcAtmConfigQ93bNumConnectAckPduRx Counter
  svcAtmConfigQ93bNumReleasePduTx Counter
  svcAtmConfigQ93bNumReleasePduRx Counter
  svcAtmConfigQ93bNumReleaseCmpltPduTx Counter
  svcAtmConfigQ93bNumReleaseCmpltPduRx Counter
  svcAtmConfigQ93bNumAddPtyPduTx Counter
  svcAtmConfigQ93bNumAddPtyPduRx Counter
  svcAtmConfigQ93bNumAddPtyAckPduTx Counter
  svcAtmConfigQ93bNumAddPtyAckPduRx Counter
  svcAtmConfigQ93bNumAddPtyRejPduTx Counter
  svcAtmConfigQ93bNumAddPtyRejPduRx Counter
  svcAtmConfigQ93bNumDropPtyPduTx Counter
  svcAtmConfigQ93bNumDropPtyPduRx Counter
  svcAtmConfigQ93bNumDropPtyAckPduTx Counter
  svcAtmConfigQ93bNumDropPtyAckPduRx Counter
  svcAtmConfigQ93bNumStatusEnqPduTx Counter
  svcAtmConfigQ93bNumStatusEnqPduRx Counter
  svcAtmConfigQ93bNumStatusPduTx Counter
  svcAtmConfigQ93bNumStatusPduRx Counter
  svcAtmConfigQ93bNumRestartPduTx Counter
  svcAtmConfigQ93bNumRestartPduRx Counter
  svcAtmConfigQ93bNumRestartAckPduTx Counter
  svcAtmConfigQ93bNumRestartAckPduRx Counter
  svcAtmConfigQSaalMaxCC INTEGER
  svcAtmConfigQSaalMaxPD INTEGER
  svcAtmConfigQSaalMaxStat INTEGER
  svcAtmConfigQSaalTPoll INTEGER
  svcAtmConfigQSaalTKeepalive INTEGER
  svcAtmConfigQSaalTNoResponse INTEGER
  svcAtmConfigQSaalTCC INTEGER
  svcAtmConfigQSaalTIdle INTEGER
  svcAtmConfigQSaalNumDiscardTx Counter
  svcAtmConfigQSaalNumDiscardRx Counter
  svcAtmConfigQSaalNumErrorTx Counter
  svcAtmConfigQSaalNumErrorRx Counter
  svcAtmConfigQSaalNumBgnPduTx Counter
  svcAtmConfigQSaalNumBgnPduRx Counter
  svcAtmConfigQSaalNumBgakPduTx Counter
  svcAtmConfigQSaalNumBgakPduRx Counter
  svcAtmConfigQSaalNumBgrejPduTx Counter
  svcAtmConfigQSaalNumBgrejPduRx Counter
  svcAtmConfigQSaalNumEndPduTx Counter
  svcAtmConfigQSaalNumEndPduRx Counter
  svcAtmConfigQSaalNumEndakPduTx Counter
  svcAtmConfigQSaalNumEndakPduRx Counter
  svcAtmConfigQSaalNumRsPduTx Counter
  svcAtmConfigQSaalNumRsPduRx Counter
  svcAtmConfigQSaalNumRsakPduTx Counter
  svcAtmConfigQSaalNumRsakPduRx Counter
  svcAtmConfigQSaalNumErPduTx Counter
  svcAtmConfigQSaalNumErPduRx Counter
  svcAtmConfigQSaalNumErakPduTx Counter
  svcAtmConfigQSaalNumErakPduRx Counter
  svcAtmConfigQSaalNumSdPduTx Counter
  svcAtmConfigQSaalNumSdPduRx Counter
  svcAtmConfigQSaalNumPollPduTx Counter
  svcAtmConfigQSaalNumPollPduRx Counter
  svcAtmConfigQSaalNumStatPduTx Counter
  svcAtmConfigQSaalNumStatPduRx Counter
  svcAtmConfigQSaalNumUstatPduTx Counter
  svcAtmConfigQSaalNumUstatPduRx Counter
  svcAtmConfigQSaalNumUdPduTx Counter
  svcAtmConfigQSaalNumUdPduRx Counter
  svcAtmConfigQSaalNumMdPduTx Counter
  svcAtmConfigQSaalNumMdPduRx Counter

SvcAtmFailedCallEntry  
SEQUENCE    
  svcAtmFailedCallIfIndex Index
  svcAtmFailedCallIndex INTEGER
  svcAtmFailedCallDirection INTEGER
  svcAtmFailedCallPduType INTEGER
  svcAtmFailedCallPduDirection INTEGER
  svcAtmFailedCallCause INTEGER
  svcAtmFailedCallLocation INTEGER
  svcAtmFailedCallDiagnostic OCTET STRING
  svcAtmFailedCallCreationTime TimeTicks
  svcAtmFailedCallTerminationTime TimeTicks
  svcAtmFailedCallFailureNodeId INTEGER
  svcAtmFailedCallFailureIfIndex Index
  svcAtmFailedCallCallingParty OCTET STRING
  svcAtmFailedCallCalledParty OCTET STRING
  svcAtmFailedCallAtmTfdType INTEGER
  svcAtmFailedCallAtmTfdParam1 INTEGER
  svcAtmFailedCallAtmTfdParam2 INTEGER
  svcAtmFailedCallAtmTfdParam3 INTEGER
  svcAtmFailedCallAtmQosClass INTEGER
  svcAtmFailedCallAtmRTfdType INTEGER
  svcAtmFailedCallAtmRTfdParam1 INTEGER
  svcAtmFailedCallAtmRTfdParam2 INTEGER
  svcAtmFailedCallAtmRTfdParam3 INTEGER
  svcAtmFailedCallAtmRQoSClass INTEGER
  svcAtmFailedCallBBearerClass INTEGER
  svcAtmFailedCallBBearerTfcType INTEGER
  svcAtmFailedCallBBearerTmgRqmt INTEGER
  svcAtmFailedCallBBearerUplaneCfg INTEGER
  svcAtmFailedCallBBearerClippingSusc INTEGER
  svcAtmFailedCallAdminStatus INTEGER

SwEntry  
SEQUENCE    
  swLogicalSlotId INTEGER
  swRedundState INTEGER
  swRevision DisplayString
  swBuildID DisplayString
  swBuildDate DisplayString
  swBuildDescription DisplayString
  swCopyrightNotice DisplayString
  swCapabilityMask INTEGER
  swFeatureMask INTEGER
  swPatchMask INTEGER
  swBuildUserId DisplayString
  swBuildView DisplayString
  swBuildConfigSpec DisplayString

Defined Values

cascade 4.1.277
OBJECT IDENTIFIER    

cascfr 4.1.277.1
OBJECT IDENTIFIER    

cascsmds 4.1.277.2
OBJECT IDENTIFIER    

namebinding 4.1.277.3
OBJECT IDENTIFIER    

isdnaddr 4.1.277.4
OBJECT IDENTIFIER    

cascsvc 4.1.277.5
OBJECT IDENTIFIER    

software 4.1.277.6
OBJECT IDENTIFIER    

provserver 4.1.277.9
OBJECT IDENTIFIER    

net 4.1.277.1.1
OBJECT IDENTIFIER    

ase 4.1.277.1.2
OBJECT IDENTIFIER    

node 4.1.277.1.3
OBJECT IDENTIFIER    

pport 4.1.277.1.4
OBJECT IDENTIFIER    

lport 4.1.277.1.5
OBJECT IDENTIFIER    

ckt 4.1.277.1.6
OBJECT IDENTIFIER    

card 4.1.277.1.7
OBJECT IDENTIFIER    

ds1 4.1.277.1.8
OBJECT IDENTIFIER    

smdsaddr 4.1.277.2.1
OBJECT IDENTIFIER    

svcaddress 4.1.277.5.1
OBJECT IDENTIFIER    

svcmgt 4.1.277.5.2
OBJECT IDENTIFIER    

netMask 4.1.277.1.1.1
The IP subnet mask for the network. The default is 255.255.255.0 (class C) which allows 254 nodes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

netNumber 4.1.277.1.1.2
The IP network number for the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

netDlciAddrSig 4.1.277.1.1.3
This variable states the DLCI addressing significance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER globalAddr(1), localAddr(2)  

netMaxSegsize 4.1.277.1.1.4
This variable states the maximum sgement size for the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

netSmdsAreaMaskStart 4.1.277.1.1.8
This variable states the starting digit number for defining the start of the Area Mask for SMDS Addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

netSmdsAreaMaskDigits 4.1.277.1.1.9
This variable states the number of digits used for defining the Area Mask for SMDS Addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

aseTable 4.1.277.1.2.1
A list of ASE entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AseEntry

aseEntry 4.1.277.1.2.1.1
An ASE entry contains an external NMS path accessible from the node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AseEntry  

aseAddr 4.1.277.1.2.1.1.1
IP Address for an external NMS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

aseMask 4.1.277.1.2.1.1.2
IP Address mask for an external NMS. The default value is 255.255.255.255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

aseDefaultGwAddr 4.1.277.1.2.1.1.3
Default Gateway IP Address for reaching the external NMS. This field is not applicable to NMSs which are reachable via SLIP or on the same Ethernet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

aseMetricType 4.1.277.1.2.1.1.4
Type of metric (1 or 2) for each external NMS. The default is 1. (This field is not applicable to SLIP- based hosts.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

aseAdminStatus 4.1.277.1.2.1.1.5
The desired state of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1)  

aseIfIndex 4.1.277.1.2.1.1.6
The interface value of the corresponding MIB-II ifEntry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Index  

aseDlci 4.1.277.1.2.1.1.7
The management dlci through which the NMS communicates to the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nodeIpAddr 4.1.277.1.3.1
The inband IP address of the node in the Cascade internal trunk IP network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

nodeLanIpAddr 4.1.277.1.3.2
The inband (Ethernet) IP address of the node for a NMS to access the node and the internal trunk IP network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

nodeNMSTable 4.1.277.1.3.3
A list of NMS entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NodeNMSEntry

nodeNMSEntry 4.1.277.1.3.3.1
A NMS entry contains an IP address of a NMS which has extended privilages.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NodeNMSEntry  

nodeNMSIndex 4.1.277.1.3.3.1.1
The IP address entry of a primary Network Management Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Index  

nodeNMSIpAddr 4.1.277.1.3.3.1.2
The IP address of the primary Network Management Station. It is to this address that Traps and TFTP requests will be directed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

nodeState 4.1.277.1.3.4
The state of the switch. The switch needs to await the state to be set to active before being fully operational after cold boot, when the NMS is reachable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER down(1), initializing(2), active(3), marginal(4), testing(5)  

nodePollStatus 4.1.277.1.3.5
The consolidated node status in response to keep-alive polls. It is an octet string of a proprietary format
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

nodeModel 4.1.277.1.3.6
The part number of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nodeSerial 4.1.277.1.3.7
The serial number (i.e., Ethernet Addr) of the switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

nodeSwRev 4.1.277.1.3.8
The software revision number (major.minor).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nodeHwRev 4.1.277.1.3.9
The hardware revision number (major.minor).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nodeEpromRev 4.1.277.1.3.10
The EPROM firmware revision number (major.minor).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nodeCpuUtil 4.1.277.1.3.11
The CPU utilization percentage for packet processing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nodePsAStatus 4.1.277.1.3.12
The status of the power supply A. For a detailed explanation for the power supply being either in the down or marginal state, refer to the nodePsADiagCode object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), marginal(4)  

nodePsBStatus 4.1.277.1.3.13
The status of the power supply B. For a detailed explanation for the power supply being either in the down or marginal state, refer to the nodePsBDiagCode object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), marginal(4)  

nodeFanTable 4.1.277.1.3.14
A list of fan entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NodeFanEntry

nodeFanEntry 4.1.277.1.3.14.1
A Fan entry contains the status of a fan.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NodeFanEntry  

nodeFanIndex 4.1.277.1.3.14.1.1
A unique value for each fan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nodeFanStatus 4.1.277.1.3.14.1.2
The status of the fan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), marginal(3)  

nodeFanSpeed 4.1.277.1.3.14.1.3
The speed in Revolutions Per. Minute (RPM) of the fan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nodeMemoryUtil 4.1.277.1.3.15
The percentage of system memory utilization on this intelligent card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nodeMemoryUsage 4.1.277.1.3.16
The system memory utilization, in terms of free bytes, for this intelligent card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nodeMaxFramesize 4.1.277.1.3.17
The maximum frame size supported by the node. The default is 4096.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nodeQOSPollTimer 4.1.277.1.3.18
The timer (seconds) for generating QOS polling packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nodeActivePvcs 4.1.277.1.3.19
The number of currently active PVCs on the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeInactivePvcs 4.1.277.1.3.20
The number of currently inactive PVCs on the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodePendingPvcs 4.1.277.1.3.21
The number of currently call pending PVCs on the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeInOctets 4.1.277.1.3.22
The total number of octets received on the node, including framing bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeInPkts 4.1.277.1.3.23
The total number of packets received on the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeOutOctets 4.1.277.1.3.24
The total number of octets transmitted out of the node, including framing bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeOutPkts 4.1.277.1.3.25
The total number of packets requested to be transmitted out of the node, including those that were discarded or not sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeSwFilename 4.1.277.1.3.26
Name of the file to be downloaded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nodeRebootAfterLoad 4.1.277.1.3.27
Instructs the device to either automatically reboot after the successful scheduled download or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reboot(1)  

nodeSwToLoad 4.1.277.1.3.28
Instructs the device to initiate a software download (via tftp) request to the master management station after the specified time ticks have elapsed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

nodeSwLoadState 4.1.277.1.3.29
The state of the software download request. A download which is in either the PENDING, ACTIVE or FAILED state can be terminated by setting this object to INACTIVE.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(1), pending(2), active(3), failed(4)  

nodePrFilename 4.1.277.1.3.30
Name of the PRAM image file to be downloaded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nodePrToLoad 4.1.277.1.3.31
Instructs the device to initiate a PRAM image file download (via tftp) request to the master management station after the specified time ticks have elapsed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

nodePrLoadState 4.1.277.1.3.32
The state of the PRAM download request. A download which is in either the PENDING, ACTIVE or FAILED state can be terminated by setting this object to INACTIVE.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(1), pending(2), active(3), failed(4)  

nodeToWarmboot 4.1.277.1.3.33
Instructs the switch to initiate a system warm boot after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled re-boot request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

nodeToColdboot 4.1.277.1.3.34
Instructs the switch to initiate a system cold boot after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled re-boot request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

nodeToRedundant 4.1.277.1.3.35
If redundancy is configured, instructs the node acting as Backup to disable the Active node and take over as the Active node. The disabling is initiated after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

nodeInitiateBulkStats 4.1.277.1.3.36
Initiates a Bulk Statistics poll and via TFTP, transfer the data to the specified IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

nodeDiagNonFatalSource 4.1.277.1.3.37
Source who reported last non-fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER power-on-diagnostics(1), background-diagnostics(2), fault(3), frame-heap(4)  

nodeDiagNonFatalTime 4.1.277.1.3.38
Time the last non-fatal error was reported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nodeDiagNonFatalErrMajor 4.1.277.1.3.39
Major error code of last non-fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nodeDiagNonFatalErrMinor 4.1.277.1.3.40
Minor error code of last non-fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nodeDiagNonFatalStr 4.1.277.1.3.41
Ascii string describing last non-fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nodeDiagFatalSource 4.1.277.1.3.42
Source who reported last fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER power-on-diagnostics(1), background-diagnostics(2), fault(3), frame-heap(4)  

nodeDiagFatalTime 4.1.277.1.3.43
Time the last fatal error was reported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nodeDiagFatalErrMajor 4.1.277.1.3.44
Major error code of last fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nodeDiagFatalErrMinor 4.1.277.1.3.45
Minor error code of last fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nodeDiagFatalStr 4.1.277.1.3.46
Ascii string describing last fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nodeDiagFatalReboots 4.1.277.1.3.47
Number of times the switch has re-booted since last fatal error was reported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeDiagFatalAddress 4.1.277.1.3.48
Address switch was executing when it encountered fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nodeDiagBackgroundPasses 4.1.277.1.3.49
Number of passes made by the background diagnostics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeDiagBackgroundFailures 4.1.277.1.3.50
Number of failures discovered by background diagnostics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeDiagBackgroundSuccesses 4.1.277.1.3.51
Number of successful passes by background diagnostics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeDiagLEDReset 4.1.277.1.3.52
Change the node state from marginal to active. Change the LED from yellow to green.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER state-to-active(1)  

nodeDiagPowerExtensive 4.1.277.1.3.53
Should power on diagnostics do slower, extensive testing, or fast testing?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER extensive-tests(1)  

nodePortPoll 4.1.277.1.3.54
The consolidated port status in response to keep-alive polls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

nodeMaxTelnetConsole 4.1.277.1.3.55
The number of concurrent telnet consoles allowed. The default is 2. The maximum is 5. Set it 0 to disable telnet access.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nodeConsoleTimeout 4.1.277.1.3.56
Idle-logoff timer in minutes. The default is 5 minutes, and the maximum can be set is 60 minutes. To disable idle-logout, set this to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nodeConsoleTable 4.1.277.1.3.57
A list of active consoles on the node, logged in through telnet or serial port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NodeConsoleEntry

nodeConsoleEntry 4.1.277.1.3.57.1
Information of a console.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NodeConsoleEntry  

nodeConsoleIndex 4.1.277.1.3.57.1.1
A positive integer to identify a console
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

nodeUserName 4.1.277.1.3.57.1.2
The login user name up to 31 characters. There is no validation of the name, i.e., any string is acceptable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

nodeUserFrom 4.1.277.1.3.57.1.3
The IP address from which the user logged in. 0.0.0.0 if the user logged in through serial port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

nodeConsoleAccessMode 4.1.277.1.3.57.1.4
The access mode of the console. By default, a user is in READ ONLY mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2)  

nodeConsoleUptime 4.1.277.1.3.57.1.5
How long the console has been active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nodePsADiagCode 4.1.277.1.3.58
The failure code of the power supply A. A non-zero value indicates one or more failures. Refer to the hardware manual for a description of the failure code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nodePsBDiagCode 4.1.277.1.3.59
The failure code of the power supply B. A non-zero value indicates one or more failures. Refer to the hardware manual for a description of the failure code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nodeFrameMemoryUtil 4.1.277.1.3.60
The percentage of frame memory utilization on this intelligent card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nodeFrameMemoryUsage 4.1.277.1.3.61
The frame memory utilization, in terms of free bytes, for this intelligent card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nodeCapability 4.1.277.1.3.62
The capability of this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER frame-relay(1), smds(2)  

nodeSvcLastCallFailure 4.1.277.1.3.63
A textual string describing the last call failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

nodeRerouteDelay 4.1.277.1.3.64
The number of seconds delay between each reroute batch event.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nodeRerouteCount 4.1.277.1.3.65
The number of virtual circuits to request a reroute for duing a single reroute batch event.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nodeFileTransferRequest 4.1.277.1.3.66
This object is used to initiate file transfers to and from the switch. A management station can initiate a file transfer by settting this object of text string in the following format: operation filename time-to-wait target-host protocol where operation - [get | put], filename - configuration.[card] time-to-wait - a number in seconds target-host - the IP address of target host protocol - [tftp | ftp] Multiple transfers can be specified by repeating above with ';' between each transfer specifier. Examples: o get configuration.10 5 152.148.10.100 tftp will start a transfer of configuration information on card 10 to host 152.148.10.100 in 5 seconds. o put configuration.1 2 152.148.1.1 tftp ; get configuration.1 15 152.148.1.1 tftp will (1) transfer configuration.1 from 152.148.1.1 (2) transfer configuration.2 to 152.148.1.1 To cancel the transfer request, set this object to empty.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nodeFileTransferStatus 4.1.277.1.3.67
The status of the file tarnsfer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER complete(1), active(2), failed(3), invalid(4), filename(5), timeout(6), canceled(7)  

nodeTime 4.1.277.1.3.68
The current wall-clock time that is set on the switch in Universal Coordinated Time (UCT). The value is the number of seconds since 00:00:00 UCT January 1, 1970.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

nodeBillingAPAddress 4.1.277.1.3.69
The IP Address of the Adjunct Billing Processor that is servicing this switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

nodeBillingAPUsername 4.1.277.1.3.70
The Username of the account on the Adjunct Billing Processor to which usage data will be transferred via FTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nodeBillingAPPassword 4.1.277.1.3.71
The Password corresponding to the account identified by nodeBillingAPUsername. A NULL string is returned when read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nodeBillingSwAPCommsFailures 4.1.277.1.3.72
The number of times that communication from the switch to the Adjunct Billing Processor has failed during the current aggregation period. A failure signifies failure of a file transfer operation to the Adjunct Processor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

nodeBillingTable 4.1.277.1.3.73
A table of Billing System managable objects, indexed by service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NodeBillingEntry

nodeBillingEntry 4.1.277.1.3.73.1
A nodeBillingEntry contains a set of statistics that summarize the Billing System performance for a particular service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NodeBillingEntry  

nodeBillingService 4.1.277.1.3.73.1.1
The service being reported. This is the index into the table. Additional table rows for Frame Relay and ATM may be provided in the future.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER smds(1)  

nodeBilling 4.1.277.1.3.73.1.2
Switch to enable and disable billing on the STDX. When the value of nodeBilling is 'enabled', the value of a logical port's lportBilling object will take precedence. When the value of nodeBilling is 'disabled', it overrides all logical ports' lportBilling objects and billing is disabled across the entire switch. The default value of this object is 'disabled'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

nodeBillingAggrPeriod 4.1.277.1.3.73.1.3
Defines the length of the Billing Aggregation Period in seconds. The default value is 15 minutes. The minimum value is 10 minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

nodeBillingCurAggrPeriodStart 4.1.277.1.3.73.1.4
The start-time of the current aggregation period, given by the number of seconds since 00:00:00 UCT January 1, 1970.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nodeBillingCurAggrPeriodEnd 4.1.277.1.3.73.1.5
The end-time of the current aggregation period, given by the number of seconds since 00:00:00 UCT January 1, 1970.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nodeBillingCollection 4.1.277.1.3.73.1.6
Defines how often the Data Aggregation process on the CP is to poll the IOPs for usage data. The default value is 30 second. The range is unbounded, but practical use will dictate a range from 30 seconds to 1 minute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

nodeBillingDailyProcessing 4.1.277.1.3.73.1.7
Defines whether the Billing System is to perform a set of carrier-specific actions at the time given by nodeBillingDPTime. This object can be used to schedule the generation of statistics on a 24-hour basis, for example.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

nodeBillingDPTime 4.1.277.1.3.73.1.8
Defines the time (given by the number of seconds since 00:00:00 UCT) that the Billing System is to perform a set of carrier-specific actions. This object can be used to schedule the generation of statistics on a 24-hour basis, for example.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

nodeBillingUsageRecOvflWarnings 4.1.277.1.3.73.1.9
Count of the number of usage record counter-value overflow conditions that have occurred during the current aggregation period. An overflow condition exists when an attempt was made to update a usage record counter, but such an update would have overflowed the counter. In this case, the usage record is closed and a new one is opened, if there is sufficient space in the service's aggregated usage data store.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeBillingTotalUsageRecOvflWarnings 4.1.277.1.3.73.1.10
Count of the number of usage record overflow conditions that have occurred during the current day.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeBillingBillableUsageEvents 4.1.277.1.3.73.1.11
Count of the number of data units (e.g, SMDS L3 PDUs) processed for billing treatment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeBillingNonBillableUsageEvents 4.1.277.1.3.73.1.12
Count of the number of data units (e.g, SMDS L3 PDUs) not considered for billing treatment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeBillingUsageRecCreated 4.1.277.1.3.73.1.13
Count of the number of usage records created during the current aggregation period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeBillingTotalUsageRecCreated 4.1.277.1.3.73.1.14
Count of the total number of usage records created during the current day.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeBillingUsageRecCrFailures 4.1.277.1.3.73.1.15
Total number of usage records that could not be created during the current aggregation period. This counter is normally incremented when the usage data file is at capacity and no additional usage records can be added.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeBillingTotalUsageRecCrFailures 4.1.277.1.3.73.1.16
Total number of usage records that could not be created during the current day.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeBillingUsageRecSent 4.1.277.1.3.73.1.17
Total number of usage records that have been transferred to the Adjunct Billing Processor during the current aggregation period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeBillingTotalUsageRecSent 4.1.277.1.3.73.1.18
Total number of usage records that have been transferred to the Adjunct Billing Processor during the current day.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeBillingUsageDataStoreFull 4.1.277.1.3.73.1.19
The number of times the aggregated usage data store became full during the current aggregation period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeBillingTotalUsageDataStoreFull 4.1.277.1.3.73.1.20
Total number of times the aggregated usage data store became full during the current day.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nodeBillingAdminAction 4.1.277.1.3.73.1.21
This object defines a set of administrative actions that can be performed by the Billing System. forceUpload - Forces the current aggregation period to end and the service's aggregated usage data file to be uploaded to the Adjunct Processor. A new aggregation period is then started. This action can be requested when billing is enabled or disabled for the service. This object always returns invalid(1) when read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), forceUpload(2)  

nodeRerouteAlg 4.1.277.1.3.74
The number of seconds delay between each reroute batch event.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER negneg(1), pospos(2), disable(3)  

nodeOamAlarmDisabled 4.1.277.1.3.76
If disabled then don't generate oam alarms for circuits that are down on this switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nodeRefclocksrcTable 4.1.277.1.3.77
A list of generators (sources) for the system reference clock on the node. This reference clock is used by the clock generation unit (CGU) to create the system clock. To this reference clock the constant bit rate ATM interface cards (CBR cards) are synchronized.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NodeRefclocksrcEntry

nodeRefclocksrcEntry 4.1.277.1.3.77.1
Information of a single system reference clock source.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NodeRefclocksrcEntry  

nodeRefclocksrcIndex 4.1.277.1.3.77.1.1
A positive integer to identify an entry in the nodeRefclocksrcTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

nodeRefclocksrcPriority 4.1.277.1.3.77.1.2
The priority of the system reference clock source. A source with a nodeRefclocksrcPriority=n means that this source is used before a source with a higher value of nodeRefclocksrcPriority as long as this source is available. The system choses one of the sources with the same lowest available value of nodeRefclocksrcPriority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

nodeRefclocksrcType 4.1.277.1.3.77.1.3
The type of the reference clock source. It is either an external clock source connected to a ATM-IWU or DS3 card, or the reference clock is recovered from the line interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER external(1), pport(2)  

nodeRefclocksrcSlotId 4.1.277.1.3.77.1.4
The card number of the reference clock source. In case of an external clock interface this is the number of the card as defined in cardLogicalSlotId. In case of a clock recovered from the line interface it is the number of the corresponding card as defined in cardLogicalSlotId.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nodeRefclocksrcPportId 4.1.277.1.3.77.1.5
The interface number of the reference clock source. In case of an external clock interface this is meaningless. In case of a clock recovered from the line interface it is the number of the corresponding pport as defined in pportId.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nodeRefclockActiveSrc 4.1.277.1.3.78
The entry number of the active reference clock source in nodeRefclocksrcTable. If zero, the CGU is in free-running mode or holdover mode using the last PLL parameters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nodeRefclockActiveCGUSlotId 4.1.277.1.3.79
The physical slot id of the current master CGU board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nodeRefclockActiveCGUMode 4.1.277.1.3.80
The clock mode of the current master CGU board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER free-running(1), sync-to-reference-clock(2), holdover(3), extended-holdover(4)  

nodeInitiateImageBackup 4.1.277.1.3.81
When set, copy all of the runtime application images and configuration images to there corresponding backup locations on the hard disk.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER proceed(1)  

nodeImageBackupState 4.1.277.1.3.82
Provides the current state of the images backup operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER proceeding(1), done(2)  

nodeInitiateImageRestore 4.1.277.1.3.83
When set, copy all of the runtime application images and configuration images from their BACKUP locations on the hard disk to there corresponding ACTIVE locations on the hard disk. Once completed, reboot the entire node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER proceed(1)  

nodeApplicationTable 4.1.277.1.3.84
A list of Application Image Descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NodeApplicationEntry

nodeApplicationEntry 4.1.277.1.3.84.1
An Application Entry contains a description of the application image, the version of the PRIMARY copy and the version of the SECONDARY copy.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NodeApplicationEntry  

nodeApplicationIndex 4.1.277.1.3.84.1.1
The numeric index of application images. 1 - SP Runtime Application 2 - IOM Type A Runtime Application 3 - IOM Type B Runtime Application 4 - IOM Type C Runtime Application 5 - IOM Type D Runtime Application
Status: mandatory Access: read-only
OBJECT-TYPE    
  Index  

nodeApplicationDescription 4.1.277.1.3.84.1.2
The description of this Application Image.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nodePrimaryVersion 4.1.277.1.3.84.1.3
The version of the PRIMARY Application Image.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nodeSecondaryVersion 4.1.277.1.3.84.1.4
The version of the SECONDARY Application Image.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nodePrimarySyncRefAdminState 4.1.277.1.3.85
The requested primary clock synchronization reference source.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER externala(1), externalb(2), portrefa(3), portrefb(4), internal(5)  

nodePrimarySyncRefOperationalState 4.1.277.1.3.86
The actual primary clock synchronization reference source.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER externala(1), externalb(2), portrefa(3), portrefb(4), internal(5)  

nodeSecondarySyncRefAdminState 4.1.277.1.3.87
The requested secondary clock synchronization reference source.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER externala(1), externalb(2), portrefa(3), portrefb(4), internal(5)  

nodeSecondarySyncRefOperationalState 4.1.277.1.3.88
The actual secondary clock synchronization reference source.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER externala(1), externalb(2), portrefa(3), portrefb(4), internal(5)  

nodePrimaryPLLOperationalState 4.1.277.1.3.89
The current state of the primary synchronization PLL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), down(2)  

nodeSecondaryPLLOperationalState 4.1.277.1.3.90
The current state of the secondary synchronization PLL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), down(2)  

nodeExternalClockAOperationalState 4.1.277.1.3.91
The current state of the External Clock A reference.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), ais(2), los(3)  

nodeExternalClockBOperationalState 4.1.277.1.3.92
The current state of the External Clock B reference.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), ais(2), los(3)  

nodePortClockAOperationalState 4.1.277.1.3.93
The current state of the Port Clock A reference.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), down(2)  

nodePortClockBOperationalState 4.1.277.1.3.94
The current state of the Port Clock B reference.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), down(2)  

nodeExternalTimingSource 4.1.277.1.3.95
The reference for the external timing output.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER externala(1), externalb(2), portrefa(3), portrefb(4), internal(5)  

nodeSyncAutoRestore 4.1.277.1.3.96
The configuration of the Synchronization Reference Auto Restoration function.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

nodeExternalClockInterfaceType 4.1.277.1.3.97
The interface type of the External Clock references.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER t1(1), e1bnc(2), e1ww(3)  

cardNumber 4.1.277.1.7.1
The number of manageable cards physically present in this node. Standby cards are not considered manageable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardTable 4.1.277.1.7.2
A list of cardEntry's. The number of entries is given by the value of cardNumber
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CardEntry

cardEntry 4.1.277.1.7.2.1
The card entry contains objects relevant to managing intelligent cards.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CardEntry  

cardLogicalSlotId 4.1.277.1.7.2.1.1
The logical slot number of this card. This is used as an index for the cardTable. In redundant configurations, this can be the physical slot number of either redundant card. In non redundant configurations, this is the same as cardPhysicalSlotId.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardPhysicalSlotId 4.1.277.1.7.2.1.2
The physical slot number of this card. This can be different from cardLogicalSlotId in redundant configurations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardAdminType 4.1.277.1.7.2.1.3
The desired card type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  CardTypes  

cardOperType 4.1.277.1.7.2.1.4
The actual card type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  CardTypes  

cardState 4.1.277.1.7.2.1.5
The state of this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER present(1), loading(2), start(3), init(4), sync(5), syncdone(6), ready(7), active(8), stopped(9), down(10), debug(11), offlinediag(12)  

cardAdminStatus 4.1.277.1.7.2.1.6
The desired status of this card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  CardStatuses  

cardOperStatus 4.1.277.1.7.2.1.7
The current status of this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  CardStatuses  

cardDiagStatus 4.1.277.1.7.2.1.8
The current diagnostics status of this card, as determined by background diagnostics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), marginal(2)  

cardRedundConfig 4.1.277.1.7.2.1.9
Is the card configured for redundancy?
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER configured(1)  

cardRedundSlotMask 4.1.277.1.7.2.1.10
A 32-bit mask indicating the slot position of this card and its redundant partner. The low bit is slot 1 and the high bit is slot 32.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardRedundActual 4.1.277.1.7.2.1.11
Is the card currently connected to a redundant card?
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), not-connected(2)  

cardRedundState 4.1.277.1.7.2.1.12
The current redundancy state of this card. Exception: when used as an index for the following objects: cardAdminType, cardAdminCapability, and cardAdminStatus, the value 1 indicates the card of the redundant pair in the lower-numbered slot, and the value 2 indicates the card in the higher-numbered slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), standby(2)  

cardToRedundant 4.1.277.1.7.2.1.13
Instructs the standby card to reset the active card and take over as new active card. The reset takes place after specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

cardDiagNonFatalSource 4.1.277.1.7.2.1.14
Source who reported last non-fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER power-on-diagnostics(1), background-diagnostics(2), fault(3), frame-heap(4), redundancy(5), system-level(6), card-level(7), i960-data-structures(8), general(9), data-alignment(10), device-driver-level(11)  

cardDiagNonFatalTime 4.1.277.1.7.2.1.15
Time the last non-fatal error was reported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

cardDiagNonFatalErrMajor 4.1.277.1.7.2.1.16
Major error code of last non-fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardDiagNonFatalErrMinor 4.1.277.1.7.2.1.17
Minor error code of last non-fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardDiagNonFatalStr 4.1.277.1.7.2.1.18
Ascii string describing last non-fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardDiagFatalSource 4.1.277.1.7.2.1.19
Source who reported last fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER power-on-diagnostics(1), background-diagnostics(2), fault(3), frame-heap(4), redundancy(5), system-level(6), card-level(7), i960-data-structures(8), general(9), data-alignment(10), device-driver-level(11)  

cardDiagFatalTime 4.1.277.1.7.2.1.20
Time the last fatal error was reported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

cardDiagFatalErrMajor 4.1.277.1.7.2.1.21
Major error code of last fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardDiagFatalErrMinor 4.1.277.1.7.2.1.22
Minor error code of last fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardDiagFatalStr 4.1.277.1.7.2.1.23
Ascii string describing last fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardDiagFatalReboots 4.1.277.1.7.2.1.24
Number of times the switch has re-booted since last fatal error was reported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardDiagFatalAddress 4.1.277.1.7.2.1.25
Address switch was executing when it encountered fatal error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardDiagBackgroundPasses 4.1.277.1.7.2.1.26
Number of passes made by the background diagnostics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardDiagBackgroundFailures 4.1.277.1.7.2.1.27
Number of failures discovered by background diagnostics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardDiagBackgroundSuccesses 4.1.277.1.7.2.1.28
Number of successful passes by background diagnostics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardDiagLEDReset 4.1.277.1.7.2.1.29
Change the card state from marginal to active. Change the LED from yellow to green.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER state-to-active(1)  

cardDiagPowerExtensive 4.1.277.1.7.2.1.30
Should power on diagnostics do slower, extensive testing, or fast testing?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER extensive-tests(1)  

cardCpuUtil 4.1.277.1.7.2.1.31
The CPU utilization percentage for packet processing on this intelligent card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cardMemoryUsage 4.1.277.1.7.2.1.32
The memory utilization, in terms of free bytes, for this intelligent card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cardMaxVCs 4.1.277.1.7.2.1.33
The number of available VC entries on this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cardInUseVCs 4.1.277.1.7.2.1.34
The number of currently in use VC entries on this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cardFreeVCs 4.1.277.1.7.2.1.35
The number of currently free VC entries on this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cardInOctets 4.1.277.1.7.2.1.36
The total number of octets received on this card, including framing bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardInPkts 4.1.277.1.7.2.1.37
The total number of packets received on this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardOutOctets 4.1.277.1.7.2.1.38
The total number of octets transmitted out of this card, including framing bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardOutPkts 4.1.277.1.7.2.1.39
The total number of packets requested to be transmitted out of this card, including those that were discarded or not sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardToWarmboot 4.1.277.1.7.2.1.40
Warm boots the card after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled re-boot request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

cardToColdboot 4.1.277.1.7.2.1.41
Cold boots the card after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled re-boot request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

cardModel 4.1.277.1.7.2.1.42
The part number of the card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardSerial 4.1.277.1.7.2.1.43
The serial number of the card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardSwRev 4.1.277.1.7.2.1.44
The software rev number (major.minor).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardHwRev 4.1.277.1.7.2.1.45
The hardware rev number (major.minor).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardEpromRev 4.1.277.1.7.2.1.46
The EPROM firmware rev number (major.minor).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardName 4.1.277.1.7.2.1.47
The name of this card
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

cardCktGroupTrap 4.1.277.1.7.2.1.48
This is a ( 4 + n*134 ) byte octet string where n => 1. The first and second byte is the interface/slot id of the link/IOP going down or link goes up. The third byte is the reason why circuits go down: 1 is a user link goes down, 2 is a trunk link goes down, 3 is an IOP goes down and 4 is an user link goes up The fourth byte is the count of entries in the following circuit bit map array. Each circuit bit map entry is 134 bytes. The first 2 bytes is the IOP slot on which dlci's are defined. The second 2 bytes is the Physical port ID on which dlci's are defined. The third 2 bytes is the interface id on which dlci's are defined. The following 128 bytes (1024 bits) is a bit map for dlci's defined on the interface. The left-most bit of the first byte represent dlci 0 and the right-most bit of the 128th byte represent dlci 1023. If a bit is set, it means the corresponding dlci on that interface is up/down.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cardOutBtus 4.1.277.1.7.2.1.49
The number of bus transfer units sent by this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardInGoodBtus 4.1.277.1.7.2.1.50
The number of good bus transfer units received by this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardInErrorBtus 4.1.277.1.7.2.1.51
The number of bus transfer units received with errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardInNoVcBtus 4.1.277.1.7.2.1.52
The number of bus transfer units discarded because no circuit was found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardInLinkDownBtus 4.1.277.1.7.2.1.53
The number of bus transfer units discarded because the outgoing link was inactive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardInNoBufferBtus 4.1.277.1.7.2.1.54
The number of bus transfer units discarded because no buffer was available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardInForwardBitBtus 4.1.277.1.7.2.1.55
The number of bus transfer units discarded because the circuit forward bit was off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardDiagTestId 4.1.277.1.7.2.1.56
Identification of the diagnostics tests to be run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardDiagTestRuns 4.1.277.1.7.2.1.57
The number of passes of the diagnostics tests to be run. The default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardDiagState 4.1.277.1.7.2.1.58
The current state of the foreground diagnostics on this card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1)  

cardDiagOptionStr 4.1.277.1.7.2.1.59
Optional parameters to the diagnostic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

cardDiagPasses 4.1.277.1.7.2.1.60
Number of successful diagnostic passes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardDiagFailures 4.1.277.1.7.2.1.61
Number of failed diagnostic passes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardDiagResultString 4.1.277.1.7.2.1.62
Description of last diagnostic failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardFrameMemoryUtil 4.1.277.1.7.2.1.63
The percentage of frame memory utilization on this intelligent card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cardResetPram 4.1.277.1.7.2.1.64
Setting this to 1 causes a reset of PRAM on the corresponding card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reset-pram(1)  

cardMemoryUtil 4.1.277.1.7.2.1.65
The percentage of system memory utilization on this intelligent card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cardFrameMemoryUsage 4.1.277.1.7.2.1.66
The frame memory utilization, in terms of free bytes, for this intelligent card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cardUpTime 4.1.277.1.7.2.1.67
The time (in hundredths of a second) since this card was last booted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

cardPramChecksum 4.1.277.1.7.2.1.68
The PRAM checksum for this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardPhysicalIndex 4.1.277.1.7.2.1.69
The physical slot id of this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardExternalClockRate 4.1.277.1.7.2.1.70
The external clock rate for DSX1, T1 and E1 cards. The value is specified in units of 8KHz and can range from 1 to 255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardShootState 4.1.277.1.7.2.1.71
Specifies whether the system monitor on the CP should shoot this card if it's unreachable. The default is enabled. The card index used in the binding refers to a physical card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER shoot-enabled(1)  

cardEraseAll 4.1.277.1.7.2.1.72
When set to 1, erases program flash and PRAM on specified card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER erase-all(1)  

cardAdminCapability 4.1.277.1.7.2.1.73
The desired capability of the card
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER iop-frame-relay(1), iop-multi-service(2), iop-16meg-service(3), cp-basic(4), cp-30(5), cp-plus(8), cp-40(9), cp-50(10), iom-fcp(11)  

cardOperCapability 4.1.277.1.7.2.1.74
The actual capability of the card
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER iop-frame-relay(1), iop-multi-service(2), iop-16meg-service(3), cp-basic(4), cp-30(5), cp-plus(8), cp-40(9), cp-50(10), iom-fcp(11)  

cardISDNswtype 4.1.277.1.7.2.1.75
Specifies the ISDN central office switch type for the card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER att-4ess(1), att-5ess(2), dms100(3)  

cardCpuFgUtil 4.1.277.1.7.2.1.76
The CPU foreground utilization percentage for packet processing on this intelligent card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cardTrkProtState 4.1.277.1.7.2.1.77
Control for issue of Link Trunk Protocol request frames. If set to disabled, the issue of trunk protocol requests is blocked for all trunks on this card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cardISDNSigType 4.1.277.1.7.2.1.78
Specifies whether the ISDN Signalling type is Associated or Non-Facility Associated Signalling
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no-nfas(1), nfas(2)  

cardISDNChanId 4.1.277.1.7.2.1.79
Specifies whether Channel ID assignment is performed by the central office switch or the 9000 - Exclusive (central office) Preferred (9000)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER exclusive(1), preferred(2)  

cardTransmitClockConfig 4.1.277.1.7.2.1.80
The transmit clock source for timing section of the card
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER system-primary-clock(1), system-secondary-clock(2), system-primary-secondary-clock(3), free-running-clock(4), e1-G703sec10-clock(5), e1-network-clock(6)  

cardTransmitClockSwitchOver 4.1.277.1.7.2.1.81
Enable/disable automatic transmit clock source switch-over once a failed clock reference has recovered.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

cardTransmitClockStatus 4.1.277.1.7.2.1.82
The transmit clock PLL synchronization status of the card
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER in-synchronization(1), loss-of-synchronization(2)  

cardSystemPrimaryClockPortConfig 4.1.277.1.7.2.1.83
The port number (1-x) on the card that specifies the system primary clock source. A zero specifies no port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardSystemPrimaryClockStatus 4.1.277.1.7.2.1.84
The system primary clock status as detected on the card. On the BIO, this refers to the Timing Module 1 clock status as detected by the BIO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), failure(2)  

cardSystemSecondaryClockPortConfig 4.1.277.1.7.2.1.85
The port number (1 to x) on the card that specifies the system secondary clock source. A zero specifies no port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardSystemSecondaryClockStatus 4.1.277.1.7.2.1.86
The system secondary clock status as detected on the card. On the BIO, this refers to the Timing Module 2 clock status as detected by the BIO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), failure(2)  

cardInCells 4.1.277.1.7.2.1.87
The total number of cells received on this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardInErrorCells 4.1.277.1.7.2.1.88
The total number of cells received on this card with HEC error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardInErrorVPIVCI 4.1.277.1.7.2.1.89
The total number of cells received with HEC invalid VPI, VCI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardOutCells 4.1.277.1.7.2.1.90
The total number of cells transmitted out of this card
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardOutDiscardCells 4.1.277.1.7.2.1.91
The total number of cells discarded due to congestion on this card
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardQOSQueueSize 4.1.277.1.7.2.1.92
The ATM QOS queue size (per cell) of each port on the card
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER cell-8K(1), cell-24K(2)  

cardLastErrorPort 4.1.277.1.7.2.1.93
The port number (1 to x) of the last cell with invalid cell header on the card
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardLastErrorVPI 4.1.277.1.7.2.1.94
The VPI of the last cell with invalid cell header on the card
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardLastErrorVCI 4.1.277.1.7.2.1.95
The VCI of the last cell with invalid cell header on the card
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardSystemPrimaryClockModeConfig 4.1.277.1.7.2.1.96
The system primary clock mode. PLCP is for DS3 port only
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER line-rate(1), plcp-mode(2)  

cardSystemSecondaryClockModeConfig 4.1.277.1.7.2.1.97
The system secondary clock mode. PLCP is for DS3 port only
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER line-rate(1), plcp-mode(2)  

cardNFBDEStatus 4.1.277.1.7.2.1.98
Non Fatal Background Diagnostic Error Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cleared(1), not-cleared(2)  

cardProductCode 4.1.277.1.7.2.1.99
This card's product code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardMfgPN 4.1.277.1.7.2.1.100
This card's manufacturing part number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardTotalUpTime 4.1.277.1.7.2.1.101
This card's total accumulated up time, in hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

cardIOAType 4.1.277.1.7.2.1.102
The type of IOA attached to this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER spa(1), toc3-4(2), tstm1-4(3), tds3-8(4), te3-8(5), toc3-smfir-n-4(6), toc3-smfir-r-4(7), toc3-mm-r-4(8), toc3-smflr-n-4(9), toc3-smflr-r-4(10), tstm1-smfir-n-4(11), tstm1-smfir-r-4(12), tstm1-mm-r-4(13), tstm1-smflr-n-4(14), tstm1-smflr-r-4(15), tds3-r-8(16), te3-r-8(17), hssi-n(18), hssi-r(19), toc12-smf-n-1(21), tads1-t1-n-8(22), tads1-t1-r-8(23), tads1-e1-75-n-8(24), tads1-e1-75-r-8(25), tads1-e1-120-n-8(26), tads1-e1-120-r-8(27), tads1-j2-75-n-8(28), tads1-j2-75-r-8(29), tads1-j2-120-n-8(30), tads1-j2-120-r-8(31), bCS-DS3-n-1(35), bCS-DS3-r-1(36), bIWU-OC3-mm-n-1(37), bIWU-OC3-smfir-n-1(38), toc3-stm1copper-n-4(39), toc3-stm1copper-r-4(40), spa-universal(32), nplus1-chassis(41), toc12-smflr-n-1(42), npa-universal(43), bIWU-OC3-bumm-1(44), bIWU-OC3-bumm-smfir-1(45), bIWU-OC3-trm-mm-1(46), bIWU-OC3-trm-smfir-1(47), uio-v35(48), uio-x21(49), bds1-e1-bnc-n-12(50), bds1-e1-bnc-r-12(51), bds1-e1-db15-n-12(52), bds1-e1-db15-r-12(53), bCS-E3-n-1(54), bCS-E3-r-1(55), bCP-1-m(56), bCP-1-o(57), be1-atm-75-n-12(58), be1-atm-75-r-12(59), be1-atm-120-n-12(60), be1-atm-120-r-12(61), bt1-atm-100-n-12(62), bt1-atm-100-r-12(63), bds1-e1-rj48h-n-12(64), bds1-e1-rj48h-r-12(65), gx550-backplane(66), cbx500-ether-n-4(67), cbx500-ds3-n-6(68), bstdx9000-ether-n-2(69), bio550-oc3-smfir(70), bio550-oc3-smflr(71), bio550-oc3-mmf(72), bio550-oc12-smfir(73), bio550-oc12-smflr(74), bio550-oc12-mmf(75)  

cardIOAHwRev 4.1.277.1.7.2.1.103
The attached IOA's hardware revision.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardIOASerial 4.1.277.1.7.2.1.104
The attached IOA's serial number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardIOAProductCode 4.1.277.1.7.2.1.105
The attached IOA's product code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardIOAMfgPN 4.1.277.1.7.2.1.106
The attached IOA's manufacturing part number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardDS0Support 4.1.277.1.7.2.1.107
Some B-Stdx T1 boards do not support lpbk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ds0-lpbk-not-supported(1), ds0-lpbk-supported(2)  

cardDiagParamId 4.1.277.1.7.2.1.108
Parameter identifier for internal diagnostics.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardDiagParamValue 4.1.277.1.7.2.1.109
Value assigned to parameter specified by cardDiagParamId.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardBulkStatsPeakCapability 4.1.277.1.7.2.1.110
Configures capability to collect peak 5-minute statistics. Capability change takes effect upon IOM reboot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cardBulkStatsTotalCapability 4.1.277.1.7.2.1.111
Configures capability to collect total statistics. Capability change takes effect upon IOM reboot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cardBulkStatsPeakEnable 4.1.277.1.7.2.1.112
Reflects the operational state of the peak 5-minute statistic collection on an IOM. For this setting to be enabled, the respective capability must be enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cardBulkStatsTotalEnable 4.1.277.1.7.2.1.113
Reflects the operational state of the total statistic collection on an IOM. For this setting to be enabled, the respective capability must be enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cardBulkStatsBaseCollectPeriod 4.1.277.1.7.2.1.114
Configures base collection period for bulk statistics on an IOM in minutes. Only the following values are allowed: 15, 20, 30, 60, 120, 180, 240, 360, 720, 1440. The default value is 60.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 15..1440  

cardNrtsHwRev 4.1.277.1.7.2.1.115
Hardware revision of the NRTS processor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardNrtsOutCellBufSize 4.1.277.1.7.2.1.116
The size of the NRTS output cell buffer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardNrtsOperState 4.1.277.1.7.2.1.117
The operational status of the NRTS processor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER absent(1), down(2), up(3)  

cardNrtsAdminState 4.1.277.1.7.2.1.118
The admin status of the NRTS processor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cardNrtsCcrmProtocolId 4.1.277.1.7.2.1.119
The protocol ID field for the CCRM cells. Must be different from the BCM protocol ID. Default is 6.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardNrtsBcmProtocolId 4.1.277.1.7.2.1.120
The protocol ID field for the BCM cells. Must be different from the CCRM protocol ID. Default is 5.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardNrtsRmGenInterval 4.1.277.1.7.2.1.121
The RM cell generation interval in ms. Minimum is 30, maximum is 250, default is 100.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardNrtsIdleCktThresh 4.1.277.1.7.2.1.122
The number of RM cell generation intervals with no cell reception upon which the circuit is declared idle. Minimum is 1, maximum is 8, default is 8.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardNrtsVbrNrtManage 4.1.277.1.7.2.1.123
Indicates whether VBR NRT traffic should be managed by the NRTS processor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

cardNrtsIcrFact 4.1.277.1.7.2.1.124
A factor used to calculate the Initial Cell Rate for a circuit from its MCR and PCR.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardNrtsMcastDiscardThresh 4.1.277.1.7.2.1.125
A NRTS discard threshold for the multicast circuits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardNrtsMcastDiscardCount 4.1.277.1.7.2.1.126
A NRTS discard counter for the multicast circuits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardAdminIOAType 4.1.277.1.7.2.1.127
The type of IOA attached to this card viewed from NMS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER spa(1), toc3-4(2), tstm1-4(3), tds3-8(4), te3-8(5), toc3-smfir-n-4(6), toc3-smfir-r-4(7), toc3-mm-r-4(8), toc3-smflr-n-4(9), toc3-smflr-r-4(10), tstm1-smfir-n-4(11), tstm1-smfir-r-4(12), tstm1-mm-r-4(13), tstm1-smflr-n-4(14), tstm1-smflr-r-4(15), tds3-r-8(16), te3-r-8(17), hssi-n(18), hssi-r(19), toc12-smf-n-1(21), tads1-t1-n-8(22), tads1-t1-r-8(23), tads1-e1-75-n-8(24), tads1-e1-75-r-8(25), tads1-e1-120-n-8(26), tads1-e1-120-r-8(27), tads1-j2-75-n-8(28), tads1-j2-75-r-8(29), tads1-j2-120-n-8(30), tads1-j2-120-r-8(31), bCS-DS3-n-1(35), bCS-DS3-r-1(36), bIWU-OC3-mm-n-1(37), bIWU-OC3-smfir-n-1(38), toc3-stm1copper-n-4(39), toc3-stm1copper-r-4(40), spa-universal(32), nplus1-chassis(41), toc12-smflr-n-1(42), npa-universal(43), bIWU-OC3-bumm-1(44), bIWU-OC3-bumm-smfir-1(45), bIWU-OC3-trm-mm-1(46), bIWU-OC3-trm-smfir-1(47), uio-v35(48), uio-x21(49), bds1-e1-bnc-n-12(50), bds1-e1-bnc-r-12(51), bds1-e1-db15-n-12(52), bds1-e1-db15-r-12(53), bCS-E3-n-1(54), bCS-E3-r-1(55), bCP-1-m(56), bCP-1-o(57), be1-atm-75-n-12(58), be1-atm-75-r-12(59), be1-atm-120-n-12(60), be1-atm-120-r-12(61), bt1-atm-100-n-12(62), bt1-atm-100-r-12(63), bds1-e1-rj48h-n-12(64), bds1-e1-rj48h-r-12(65), cbx500-ether-n-4(67), cbx500-ds3-n-6(68), bstdx9000-ether-n-2(69), bio550-oc3-smfir(70), bio550-oc3-smflr(71), bio550-oc3-mmf(72), bio550-oc12-smfir(73), bio550-oc12-smflr(74), bio550-oc12-mmf(75)  

cardNrtsMcastRate 4.1.277.1.7.2.1.128
The NRTS shaping rate for multicast circuits as a fraction of the line rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardMonStatus 4.1.277.1.7.2.1.129
Set MON960 status, default(1) -- enable, 2 -- disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

cardImageSetA 4.1.277.1.7.2.1.130
The details of Image Set A. The elements of each image are space delimited and include Part Number, Revision, Size and Description. The details of each image are linefeed delimited.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardImageSetB 4.1.277.1.7.2.1.131
The details of Image Set B. The elements of each image are space delimited and include Part Number, Revision, Size and Description. The details of each image are linefeed delimited.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardMacAddress 4.1.277.1.7.2.1.132
ethernet MAC address of the card if there is an ethernet interface. Currently only CP cards may have ethernet. Cards without ethernet return 0 length octet string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardFlashRev 4.1.277.1.7.2.1.133
The boot flash rev number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cardRequiredCapabilityBitmask 4.1.277.1.7.2.1.134
Bitmask indicating this cards' required capabilities based on configured features. A bit is set to one if the corresponding capability is required. This variable is a bitmask so only power-of-2 values can be assigned (1,2,4,8,16,etc.) .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER aps-one-plus-one-support(1), holdover-support(2), vp-shaping(4), fe-capability(8)  

cardOperCapabilityBitmask 4.1.277.1.7.2.1.135
Bitmask indicating this cards' actual capabilities. A bit is set to one if the corresponding capability is supported. This variable is a bitmask so only power-of-2 values can be assigned (1,2,4,8,16,etc.).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER aps-one-plus-one-supported(1), holdover-supported(2), vp-shaping(4), fe-capability(8)  

cardDslModule 4.1.277.1.7.2.1.136
This is for Dynamic Software Loadl You can type: ModuleName Version, ModuleName Version, ... to load modules.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

cardIPTableSize 4.1.277.1.7.2.1.137
The maximum number of IP routing table entries supported by the card. If set to 0, routing table size is assumed unlimited.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardIPTableState 4.1.277.1.7.2.1.138
State of the card's IP routing table. If set to marginal, the routing table maximum size has been exceeded. and all routes except management prefixes have been discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), marginal(2)  

cardATMTcaInBufOverflowAlertPeriod 4.1.277.1.7.2.1.139
The atm tca ingress buffer overflow alert period (in min).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaInBufOverflowThresh 4.1.277.1.7.2.1.140
The atm tca ingress buffer overflow threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaInInvalidVpiVciAlertPeriod 4.1.277.1.7.2.1.141
The atm tca ingress invalid vpi/vci alert period (in min).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaInInvalidVpiVciThresh 4.1.277.1.7.2.1.142
The atm tca ingress invalid vpi/vci threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaInATMDCFullAlertPeriod 4.1.277.1.7.2.1.143
The atm tca ingress ATM DC full alert period (in min).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaInATMDCFullThresh 4.1.277.1.7.2.1.144
The atm tca ingress ATM DC full threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaEnable 4.1.277.1.7.2.1.145
The atm tca enable/disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

cardATMTcaId 4.1.277.1.7.2.1.146
This object identifies the the most recently declared card ATM threshold crossing alert
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ingressBufferOverfloeC(1), ingressInvalidVpiVciC(2), ingressATMDCFullC(3), ingressBufferMsbPaeC(4), ingressBufferHalfC(5), ingressBufferMsbPafC(6), egressCidLookupFailureC(7)  

cardATMTcaECidLookupFailureAlertPeriod 4.1.277.1.7.2.1.147
The atm tca ingress buffer overflow alert period (in min).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaECidLookupThresh 4.1.277.1.7.2.1.148
The atm tca ingress buffer overflow threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlOCbrFailureAlertPeriod 4.1.277.1.7.2.1.149
The atm tca sp pearl overflow CBR alert period (in min).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlOCbrThresh 4.1.277.1.7.2.1.150
The atm tca sp pearl overflow CBR threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlOAbrFailureAlertPeriod 4.1.277.1.7.2.1.151
The atm tca sp pearl overflow ABR alert period (in min).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlOAbrThresh 4.1.277.1.7.2.1.152
The atm tca sp pearl overflow ABR threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlOVbr1FailureAlertPeriod 4.1.277.1.7.2.1.153
The atm tca sp pearl overflow VBR1 alert period (in min).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlOVbr1Thresh 4.1.277.1.7.2.1.154
The atm tca sp pearl overflow VBR1 threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlOVbr2FailureAlertPeriod 4.1.277.1.7.2.1.155
The atm tca sp pearl overflow VBR2 alert period (in min).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlOVbr2Thresh 4.1.277.1.7.2.1.156
The atm tca sp pearl overflow VBR2 threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlGCbrFailureAlertPeriod 4.1.277.1.7.2.1.157
The atm tca sp pearl congestion CBR alert period (in min).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlGCbrThresh 4.1.277.1.7.2.1.158
The atm tca sp pearl congestion CBR threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlGAbrFailureAlertPeriod 4.1.277.1.7.2.1.159
The atm tca sp pearl congestion ABR alert period (in min).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlGAbrThresh 4.1.277.1.7.2.1.160
The atm tca sp pearl congestion ABR threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlGVbr1FailureAlertPeriod 4.1.277.1.7.2.1.161
The atm tca sp pearl congestion VBR1 alert period (in min).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlGVbr1Thresh 4.1.277.1.7.2.1.162
The atm tca sp pearl congestion VBR1 threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlGVbr2FailureAlertPeriod 4.1.277.1.7.2.1.163
The atm tca sp pearl congestion VBR2 alert period (in min).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPPearlGVbr2Thresh 4.1.277.1.7.2.1.164
The atm tca sp pearl congestion VBR2 threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardATMTcaSPEnable 4.1.277.1.7.2.1.165
The atm tca SP enable/disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

cardSPEFCIEnable 4.1.277.1.7.2.1.166
The atm EFCI marking enable/disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

cardSPClpEnable 4.1.277.1.7.2.1.167
The atm CLP-1 enable/disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

spATMTcaId 4.1.277.1.7.2.1.168
This object identifies the the most recently declared sp ATM threshold crossing alert and first byte is used to indicate the switching port number. i.e. sp 1 has spBufferOverflowC, then the value is 0x1001
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER spBufferOverflowC1(1), spBufferOverflowC2(2), spBufferOverflowA1(3), spBufferOverflowA2(4), spBufferOverflowV11(5), spBufferOverflowV12(6), spBufferOverflowV21(7), spBufferOverflowV22(8), spBufferCongestionC1(9), spBufferCongestionC2(10), spBufferCongestionA1(11), spBufferCongestionA2(12), spBufferCongestionV11(13), spBufferCongestionV12(14), spBufferCongestionV21(15), spBufferCongestionV22(16)  

cardSubcardToRedundant 4.1.277.1.7.2.1.169
Commands the card to initiate an immediate protection switch on the identified subcard that it controls. This causes control to be switched from the active card to the standby card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  CardTypes  

cardMemory5Usage 4.1.277.1.7.2.1.170
The bank5 memory utilization, in terms of free bytes, for CP Oynx card only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cardSF1OperStatus 4.1.277.1.7.2.1.171
The current status of Switch Fabric 1 (GX550).
Status: mandatory Access: read-only
OBJECT-TYPE    
  CardStatuses  

cardSF2OperStatus 4.1.277.1.7.2.1.172
The current status of Switch Fabric 2 (GX550).
Status: mandatory Access: read-only
OBJECT-TYPE    
  CardStatuses  

cardTM1OperStatus 4.1.277.1.7.2.1.173
The current status of Timing Module 1 (GX550).
Status: mandatory Access: read-only
OBJECT-TYPE    
  CardStatuses  

cardTM2OperStatus 4.1.277.1.7.2.1.174
The current status of Timing Module 2 (GX550).
Status: mandatory Access: read-only
OBJECT-TYPE    
  CardStatuses  

cardMemStartLog 4.1.277.1.7.2.1.175
Enable/Disable Memory log record, 1 -- enable, 0 -- disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1)  

cardMemLogLevel 4.1.277.1.7.2.1.176
Set the Memory log level. Default 6
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardMemClrLog 4.1.277.1.7.2.1.177
Enable/Disable Clear Memory log, 1 -- clear, 0 (default) -- not clear.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1)  

cardValidSubcards 4.1.277.1.7.2.1.178
The number of manageable subcards physically present in this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cardClp0CbrThreshold 4.1.277.1.7.2.1.179
The CLP 0 threshold for CBR queues in the card. Once queue length reaches this threshold, all CLP 1 cells are discarded until queue length falls below the threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardClp01CbrThreshold 4.1.277.1.7.2.1.180
The maximum length of CBR queues in the card. Once queue length reaches this threshold, all cells are discarded until queue length falls below this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardClp0VbrRtThreshold 4.1.277.1.7.2.1.181
The CLP 0 threshold for VBR RT queues in the card. Once queue length reaches this threshold, all CLP 1 cells are discarded until queue length falls below the threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardClp01VbrRtThreshold 4.1.277.1.7.2.1.182
The maximum length of VBR-RT queues in the card. Once queue length reaches this threshold, all cells are discarded until queue length falls below this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardClp0VbrNrtThreshold 4.1.277.1.7.2.1.183
The CLP 0 threshold for VBR NRT queues in the card. Once queue length reaches this threshold, all CLP 1 cells are discarded until queue length falls below the threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardClp01VbrNrtThreshold 4.1.277.1.7.2.1.184
The maximum length of VBR-NRT queues in the card. Once queue length reaches this threshold, all cells are discarded until queue length falls below this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardClp0UAbrThreshold 4.1.277.1.7.2.1.185
The CLP 0 threshold for ABR/UBR queues in the card. Once queue length reaches this threshold, all CLP 1 cells are discarded until queue length falls below the threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardClp01UAbrThreshold 4.1.277.1.7.2.1.186
The maximum length of UBR/ABR queues in the card. Once queue length reaches this threshold, all cells are discarded until queue length falls below this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardControlMessagesFromBus 4.1.277.1.7.2.1.187
The number of complete control Messages received over the Cell Bus for this card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

cardControlMessagesToBus 4.1.277.1.7.2.1.188
The number of complete control Messages transmitted by this card over the Cell Bus.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

cardBTUsFromBus 4.1.277.1.7.2.1.189
The number of BTUs received by this card over the Cell Bus.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

cardBTUsToBus 4.1.277.1.7.2.1.190
The number of BTUs transmitted by this card over the Cell Bus.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

cardInvalidPvcBTUs 4.1.277.1.7.2.1.191
The number of BTUs received by this card over the Cell Bus with an invalid PVC identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

cardIncompleteFramesFromBus 4.1.277.1.7.2.1.192
The number of partial frames received by this card over the Cell Bus which were discarded due to missing BTUs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

cardBTUsBusErrors 4.1.277.1.7.2.1.193
The number of BTUs received by this card over the Cell Bus which were discarded due to errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

cardBTUsNoResource 4.1.277.1.7.2.1.194
The number of BTUs received by this card over the Cell Bus which were discarded due to no free BTUs available to replace it.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

cardInvalidPvcBTUsThreshold 4.1.277.1.7.2.1.195
Send trap if the number of BTUs received by this card over the Cell Bus with an invalid PVC identifier exceeds this in a one minute interval. Zero value implies no check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardIncompleteFramesFromBusThreshold 4.1.277.1.7.2.1.196
Send trap if the number of partial frames received by this card over the Cell Bus which were discarded due to missing BTUs exceeds this in a one minute interval. Zero value implies no check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardBTUsBusErrorThreshold 4.1.277.1.7.2.1.197
Send trap if the number of BTUs received by this card over the Cell Bus which were discarded due to errors exceeds this in a one minute interval. Zero value implies no check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardBTUsNoResourceThreshold 4.1.277.1.7.2.1.198
Send trap if the number of BTUs received by this card over the Cell Bus which were discarded due to no free BTUs available to replace it exceeds this in a one minute interval. Zero value implies no check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardFrameMemoryThreshold 4.1.277.1.7.2.1.199
The percentage of frame memory utilization on this card which will generate a trap. Zero value implies no check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cardHoldQFrameMemory 4.1.277.1.7.2.1.200
The frame memory utilization, in terms of bytes, currently on the Hold Queues for this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardTotalAAL5RxErrorCount 4.1.277.1.7.2.1.201
The total number of Rx errors detected by the AAL5 processor on this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cardOperMemSize 4.1.277.1.7.2.1.202
The total memory size on this card, in MB (1024 Kbytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportNumber 4.1.277.1.4.1
The number of physical ports (regardless of their current state) present at this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportTable 4.1.277.1.4.2
A list of physical port entries. The number of entries is given by the value of pportNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PportEntry

pportEntry 4.1.277.1.4.2.1
The physical port entry contains objects relevant to a physical port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PportEntry  

pportSlotId 4.1.277.1.4.2.1.1
The slot number of the corresponding physical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportId 4.1.277.1.4.2.1.2
The port number of the corresponding physical port on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportAdminType 4.1.277.1.4.2.1.3
The defined type of the board which the physical port is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER v35-6(1), ft1-1-24(2), fe1-1-30(3), uio-6(4), cp1(5), uio-8(6), ft1-4-24(7), fe1-4-30(8), ft3-1(9), fe3-1(10), hssi-1(11), dsx1-10(12), rs232-18(13), rs232-8(14), ut1-4-24(15), ue1-4-30(16), atmds3-1(17), atme3-1(18), pri-4(19), e1-pri-4(20), sft1-4-24(21), sut1-4-24(22), st1-pri-4(23), t1-atm(24), e1-atm(25), ads3-t3(26), ads3-e3(27), cbr-ds1-s-4(28), cbr-ds1-us-4(29), cbr-e1-s-4(30), cbr-e1-us-4(31), cbr-atmiwu-1(32), toc3-atm-4(33), tstm1-atm-4(34), atmcs-1(35)  

pportNumLport 4.1.277.1.4.2.1.4
The number of logical ports on the physical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportDataRate 4.1.277.1.4.2.1.5
An estimate of the physical port's data rate in bits per second. The data rate can't be an arbitrary value. The legal values are list below. Note that the T1/E1 class of cards don't support this variable and return a 0 For UIO, DSX1: 9600, 19200, 38400, 48000, 56000, 64000, 128000, 192000, 256000, 320000, 384000, 448000, 512000, 576000, 640000, 704000, 768000, 832000, 896000, 960000, 1024000, 1088000, 1152000, 1216000, 1280000, 1344000, 1408000, 1472000, 1536000, 1600000, 1664000, 1728000, 1792000, 1856000, 1920000, 1984000, 2048000, 4096000, 6144000, 8192000 For HSSI: 1579000, 3158000, 4737000, 6316000, 7895000, 9474000, 11053000, 12632000, 14211000, 15790000, 17369000, 18948000, 20527000, 22106000, 23685000, 25264000, 26843000, 28422000, 30001000, 31580000, 33159000, 34738000, 36317000, 37896000, 39475000, 41054000, 42633000, 44212000, 45791000, 47370000, 48949000, 50528000 For ATM-IWU, TOPAZ OC3c: 155520000 For T1, E1, UT1, UE1, PRI, SH-T1: 0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportType 4.1.277.1.4.2.1.6
The actual type of the physical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER v35-6(1), ft1-1-24(2), fe1-1-30(3), uio-6(4), cp1(5), uio-8(6), ft1-4-24(7), fe1-4-30(8), ft3-1(9), fe3-1(10), hssi-1(11), dsx1-10(12), rs232-18(13), rs232-8(14), ut1-4-24(15), ue1-4-30(16), atm-1(17), atme3-1(18), pri-4(19), e1-pri-4(20), sft1-4-24(21), sut1-4-24(22), st1-pri-4(23), t1-atm(24), e1-atm(25), ads3-t3(26), ads3-e3(27), cbr-ds1-s-4(28), cbr-ds1-us-4(29), cbr-e1-s-4(30), cbr-e1-us-4(31), cbr-atmiwu-1(32), toc3-atm-4(33), tstm1-atm-4(34), atmcs-1(35)  

pportRecvClock 4.1.277.1.4.2.1.7
The receive clock source. This object works in cooperation with pportXmitClock. The following are the various values for different clock source types: Type Clock Source pportRevClock pportXmitClock { pportEntry 7 } { pportEntry 8 } V.35 DCE ............ 0 0 or UIO LoopTime DCE ... 3 0 DTE ............ 1 2 Direct Trunk ... 1 0 T1 or Loop Timed ..... 1 1 E1 Internal ....... 2 2 External ....... don't care 3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportXmitClock 4.1.277.1.4.2.1.8
The transmit clock source. This object works in cooperation with pportXmitClock. The following are the various values for different clock source types: Type Clock Source pportRevClock pportXmitClock { pportEntry 7 } { pportEntry 8 } V.35 DCE ............ 0 0 or UIO LoopTime DCE ... 3 0 DTE ............ 1 2 Direct Trunk ... 1 0 T1 or Loop Timed ..... 1 1 E1 Internal ....... 2 2 External ....... don't care 3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportAdminStatus 4.1.277.1.4.2.1.9
The desired state of the physical port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

pportOperStatus 4.1.277.1.4.2.1.10
The current state of the physical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

pportDs1LineType 4.1.277.1.4.2.1.11
The line type of the T1 or FT1-24B port. ANSI ESF is equivalent to Bellcore ESF.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER d4(1), esf-ansi(2), esf-att-address-a(3), esf-none(4), e1-cas-crc4(5), e1-cas-no-crc4(6), e1-no-cas-crc4(7), e1-no-cas-no-crc4(8), esf-att-address-b(9)  

pportDs1ZeroCoding 4.1.277.1.4.2.1.12
The variety of zero code suppression used on the T1 or FT1-24B link. Jammed bit is equivalent to dsx1JBZS where the DS0s will run at 56K bps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2), hdb3(3), jammed-bit(4)  

pportDs1LineBuildout 4.1.277.1.4.2.1.13
The line build out or line length specification for the DS1 or DSX-1 transmitter. These values are card specific: 10 port DSX-1 card ------------------ The accepted values are: 1 - 0 to 110 feet 2 - 110 to 220 feet 3 - 220 to 330 feet 4 - 330 to 440 feet 5 - 440 to 550 feet 6 - 550 to 660 feet 7 - over 655 feet 1-port and 4-port T1 cards -------------------------- The accepted values are: 96 - 0 to 133 feet 128 - 133 to 266 feet 160 - 266 to 399 feet 192 - 399 to 533 feet 224 - 533 to 655 feet 96 - 0 db 32 - -7.5 db 64 - -15 db 4-port CBR card --------------- The accepted values are: 96 - 0 db 32 - -7.5 db 64 - -15 db 4-port Short Haul T1 cards -------------------------- The accepted values are: 96 - 0 to 133 feet 128 - 133 to 266 feet 160 - 266 to 399 feet 192 - 399 to 533 feet 224 - 533 to 655 feet
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportDiagTestId 4.1.277.1.4.2.1.14
Identification for the diagnostics tests to be run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER v35-sca-local-loopback(1), v35-sca-remote-loopback(2), v35-csu-loopback(3), hssi-local-dte-loopback(5), hssi-local-line(6), hssi-remote-line-loopback(7), ds1-framer-local-loopback(11), ds1-line-local-loopback(12), ds1-framer-remote-loopback(13), ds1-line-remote-loopback(14)  

pportDiagTestRuns 4.1.277.1.4.2.1.15
The number of passes of the diagnostics tests to be run. The default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportInOctets 4.1.277.1.4.2.1.16
The total number of octets received on the physical port, including framing characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportInFrames 4.1.277.1.4.2.1.17
The total number of frames received on the physical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportInDiscards 4.1.277.1.4.2.1.18
The total number of inbound frames discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportInErrors 4.1.277.1.4.2.1.19
The total number of inbound frames that contained erroneous headers (e.g., illegal or unknown DLCIs).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportOutOctets 4.1.277.1.4.2.1.20
The total number of octets transmitted out of the physical port, including framing characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportOutFrames 4.1.277.1.4.2.1.21
The total number of frames transmitted out of the physical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportOutDiscards 4.1.277.1.4.2.1.22
The total number of outbound frames discarded due to severe congestion.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportOutErrors 4.1.277.1.4.2.1.23
The total number of outbound frames that causes xmit errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportDiagState 4.1.277.1.4.2.1.24
The current state of the diagnostic on this physical port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1)  

pportDiagOptionStr 4.1.277.1.4.2.1.25
Optional parameters to the diagnostic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

pportDiagPassCount 4.1.277.1.4.2.1.26
Number of successful diagnostic passes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportDiagFailCount 4.1.277.1.4.2.1.27
Number of failed diagnostic passes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportDiagResultStr 4.1.277.1.4.2.1.28
Description of last diagnostic failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

pportLinkDownReason 4.1.277.1.4.2.1.29
Reason why the link is down. The blue-alarm is equivalent to the Alarm Indication Signal (AIS) failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER red-alarm(1), yellow-alarm(2), blue-alarm(4), carrier-loss(8), looped-back(16), ber-threshold(64), signal-label-mismatch(128), loss-of-signal(256), loss-of-frame(512), loss-of-cell-delination(1024), line-AIS(2048), path-AIS(4096), loss-of-pointer(8192), line-RFI(16384), path-RFI(32768), signal-label-undefined(65536)  

pportInterface 4.1.277.1.4.2.1.30
Actual interface connected to Multi-Interface Port or ATM-IWU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER eia449(1), x21(2), eia530(3), eia530A(4), v35(5), e1-coax(6), e1-db(7), none(8), v24(9), sonet(10), sdh(11), multi-mode(12), single-mode(13)  

pportAdminInterface 4.1.277.1.4.2.1.31
Configured interface connected to Multi-Interface Port or ATM-IWU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER eia449(1), x21(2), eia530(3), eia530A(4), v35(5), e1-coax(6), e1-db(7), none(8), v24(9), sonet(10), sdh(11), multi-mode(12), single-mode(13)  

pportCellScramble 4.1.277.1.4.2.1.32
Configured ATM cell payload scrambling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

pportCbitParity 4.1.277.1.4.2.1.33
Configured ATM DS3 C-bit Parity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

pportMaxBufferSize 4.1.277.1.4.2.1.34
Maximum receive/transmit buffer size for the ATM UNI DS3 IOP
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportPeakCellRate0 4.1.277.1.4.2.1.35
Peak Cell Rate (cell/sec.) for rate queue #0. rate queues 0 - 3 are high priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportPeakCellRate1 4.1.277.1.4.2.1.36
Peak Cell Rate (cell/sec.) for rate queue #1. rate queues 0 - 3 are high priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportPeakCellRate2 4.1.277.1.4.2.1.37
Peak Cell Rate (cell/sec.) for rate queue #2. rate queues 0 - 3 are high priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportPeakCellRate3 4.1.277.1.4.2.1.38
Peak Cell Rate (cell/sec.) for rate queue #3. rate queues 0 - 3 are high priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportPeakCellRate4 4.1.277.1.4.2.1.39
Peak Cell Rate (cell/sec.) for rate queue #4. rate queues 4 - 7 are low priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportPeakCellRate5 4.1.277.1.4.2.1.40
Peak Cell Rate (cell/sec.) for rate queue #5. rate queues 4 - 7 are low priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportPeakCellRate6 4.1.277.1.4.2.1.41
Peak Cell Rate (cell/sec.) for rate queue #6. rate queues 4 - 7 are low priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportPeakCellRate7 4.1.277.1.4.2.1.42
Peak Cell Rate (cell/sec.) for rate queue #7. rate queues 4 - 7 are low priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportInCells 4.1.277.1.4.2.1.43
The total number of cells received
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportInErrorCells 4.1.277.1.4.2.1.44
The total number of cells received with error
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportOutCells 4.1.277.1.4.2.1.45
The total number of cells transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportDs3LineBuildout 4.1.277.1.4.2.1.46
The line build out or line length specification for the DS3 transmitter. 1-port ATM-UNI DS3 card -------------------------- The accepted values are: 1 - 0 to 225 feet 2 - 226 to 450 feet
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportSetDS0LoopUp 4.1.277.1.4.2.1.47
Bit map used to set one or more DS0's into loopback. Low bit corresponds to DS0 1. If a bit is set that DS0 is put into loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportSetDS0LoopDown 4.1.277.1.4.2.1.48
Bit map used to set one or more DS0's out of loopback. Low bit corresponds to DS0 1. If a bit is set that DS0 is put out of loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportDS0LoopUpStatus 4.1.277.1.4.2.1.49
Bit map reporting which DS0's have gone into loopback since the last time this variable was read
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportDS0LoopDownStatus 4.1.277.1.4.2.1.50
Bit map reporting which DS0's have gone out of loopback since the last time this variable was read
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportDS0LoopStatus 4.1.277.1.4.2.1.51
Bit map reporting which DS0's are currently in loopback. Low bit corresponds to DS0 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportISDN 4.1.277.1.4.2.1.52
Specifies whether ISDN PRI is enabled for this physical port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

pportdsx3LoopbackConfig 4.1.277.1.4.2.1.53
Integer used to set the loopback state of the DS3 or E3
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dsx3NoLoop(1), dsx3PayloadLoop(2), dsx3LineLoop(3)  

pportdsx3SendCode 4.1.277.1.4.2.1.54
Integer used to send loopback code to far-end DS3
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dsx3SendNoCode(1), dsx3SendLineCode(2), dsx3SendResetCode(4)  

pportdsx3LoopStatus 4.1.277.1.4.2.1.55
Integer indicating the current loopback status of the DS3 or E3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noloop(1), payloadloop(2), lineloop(3)  

pportdsx3FEACStatus 4.1.277.1.4.2.1.56
Integer indicating the current DS3 FAEC status: -- none (0), DS3 Equipment Failure (1), DS3 LOS (2), DS3 Out of Frame (4), DS3 AIS received (8), DS3 IDLE received (16), DS3 Equipment-Failure (NSA) (32), DS3 Common Equipment Failure (64), DS3 Loopback received (128)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportds1LoopbackConfig 4.1.277.1.4.2.1.57
Integer used to set the loopback state of the DS1
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ds1NoLoop(1), ds1PayloadLoop(2), ds1LineLoop(3)  

pportds1SendCode 4.1.277.1.4.2.1.58
Integer used to send loopback code to far-end DS1
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ds1SendNoCode(1), ds1SendFramedInbandLineActuateLoop(2), ds1SendFramedInbandLineReleaseLoop(3), ds1SendUnframedInbandLineActuateLoop(4), ds1SendUnframedInbandLineReleaseLoop(5), ds1SendFdlESFAnsiLineActuateLoop(6), ds1SendFdlESFAnsiLineReleaseLoop(7), ds1SendFdlESFAnsiPayloadActuateLoop(8), ds1SendFdlESFAnsiPayloadReleaseLoop(9)  

pportds1LoopStatus 4.1.277.1.4.2.1.59
Integer indicating the current loopback status of the DS1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noloop(1), payloadloop(2), lineloop(3)  

pportSetClkBkup 4.1.277.1.4.2.1.60
The desired clock source backup if the card is set in external clock source mode
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internalClkBkup(1), looptimedClkBkup(2)  

pportAtmIdleWord 4.1.277.1.4.2.1.61
The word used to stuff the payload of the ATM idle cell
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportAtmDisCardMode 4.1.277.1.4.2.1.62
The desired clock source backup if the card is set in external clock source mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ansiInval(1), ansiUnassignedInval(2), atmFInvalid(3), atmFUnassignedInval(4), ccittIdle(5), ccittUnassignedIdle(6)  

pportAtmLastUnconfiguredVpi 4.1.277.1.4.2.1.63
This entry holds the Vpi read from the last Unconfigured atm cell received. This entry applies to ATM pports only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportAtmLastUnconfiguredVci 4.1.277.1.4.2.1.64
This entry holds the Vci read from the last Unconfigured atm cell received. This entry applies to ATM pports only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportAtmUnconfiguredCells 4.1.277.1.4.2.1.65
This entry holds a count of the number of Unconfigured ATM cells received. This entry applies to ATM pports only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportAtmNumBitsVCI 4.1.277.1.4.2.1.66
This entry holds a count of the VCI bits supppoted my this ATM card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportAtmNumBitsVPI 4.1.277.1.4.2.1.67
This entry holds a count of the VPI bits supppoted my this ATM card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportAtmInterfaceType 4.1.277.1.4.2.1.68
Integer used to set ATM UNI or NNI type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uni(1), nni(2)  

pportSonetSDHLoopbackConfig 4.1.277.1.4.2.1.69
Integer used to set the loopback state of the Sonet/SDH port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noLoop(1), lineLoop(2), diagnosticsLoop(3)  

pportSonetSDHLoopStatus 4.1.277.1.4.2.1.70
Integer indicating the current loopback status of the Sonet/SDH port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noLoop(1), lineLoop(2), diagnosticsLoop(3)  

pportOutDiscardsCell 4.1.277.1.4.2.1.71
The total number of outbound cell discarded due to congestion.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportAtmPlcp 4.1.277.1.4.2.1.72
The PLCP maintains the state of the ATM Physical Layer Convergence Protocol. When the protocol is disabled atm direct mapping is used with hec cell delineation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pportCbrTargetClockMode 4.1.277.1.4.2.1.73
The clocking method to be used by the CBR card. 4-port CBR card ----------------------------------------------- 1 - synchronous (external) clocking 2 - SRTS clocking 3 - adaptive clock method
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportCbrCurrentClockMode 4.1.277.1.4.2.1.74
The clocking method currently used by the CBR card. 4-port CBR card ----------------------------------------------- 1 - synchronous (external) clocking 2 - SRTS clocking 3 - adaptive clock method
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportClockMasterChannel 4.1.277.1.4.2.1.75
The number of the channel (lport) on this pport that is used as ACM/SRTS master for this line interface: 4-port CBR E1/DS1 card (structured mode): 1..4
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportFibreType 4.1.277.1.4.2.1.76
The type of fibre connected to the ATM-IWU. Its type determines the maximum transmission distance. 1-port ATM-IWU STM-1/STS-3c card -------------------------------- 4 - multimode fibre (maximum transmission distance approx. 2 km) 2 - single mode fibre short haul (maximum transmission distance approx. 20 km)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER sonetMultiMode(4), sonetShortSingleMode(2)  

pportLaserStatus 4.1.277.1.4.2.1.77
The configured state of the laser: 1-port ATM-IWU STM-1/STS-3c card & Topaz 4-port OC3 & STM-1 card ---------------------------------------------------------------- 1 - off 2 - on
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

pportMaxActiveVpiBits 4.1.277.1.4.2.1.78
The maximum number of active VPI bits configured for use at the ATM interface. At the ATM UNI, the maximum number of active VPI bits configured for use ranges from 0 to 8 only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..12  

pportBipErrorsThresh 4.1.277.1.4.2.1.79
The threshold of BIP errors. If the number of line BIP-24/8 rrors persists to exceed this value, the pport will be taken down and a trap will be issued: 1-port ATM-IWU STM-1/STS-3c card: -------------------------------- 1 - ignore BIP errors 4 - 10^-4 errors 5 - 10^-5 errors 6 - 10^-6 errors
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportBipSectionErrors 4.1.277.1.4.2.1.80
The number of B1 section BIP-8 errors since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportBipLineErrors 4.1.277.1.4.2.1.81
The number of line BIP-24/8 errors since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportBipPathErrors 4.1.277.1.4.2.1.82
The number of B3 path BIP-8 errors since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportFebeErrors 4.1.277.1.4.2.1.83
The number of line Far End Block Errors since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportHcsErrors 4.1.277.1.4.2.1.84
The number of correctable HCS errors since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportHcsSevereErrors 4.1.277.1.4.2.1.85
The number of uncorrectable HCS errors since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportCongestedReceivedCells 4.1.277.1.4.2.1.86
The number of received cells that were discarded due to congestion of the ATM-IWU, since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportCongestedTransmittedCells 4.1.277.1.4.2.1.87
The number of cells to be transmitted, that were discarded due to congestion of the ATM-IWU, since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportAtmLayerErroredReceivedCells 4.1.277.1.4.2.1.88
The number of received cells that were discarded due to ATM layer errors, since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportAtmLayerErroredTransmittedCells 4.1.277.1.4.2.1.89
The number of cells to be transmitted, that were discarded due to ATM layer errors, since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportDS0BitStuff 4.1.277.1.4.2.1.90
Bit stuffing on or off for 2047 bit pattern in DS0 far end testing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportDS0BitErrorCount 4.1.277.1.4.2.1.91
Total number of errors in 2047 DS0 far end testing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportDS0BitErrorFreeSeconds 4.1.277.1.4.2.1.92
Total number of error free seconds in 2047 DS0 far end testing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportDS0BitErroredSeconds 4.1.277.1.4.2.1.93
Total number of errored seconds in 2047 DS0 far end testing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportDS0MidspanRepeaters 4.1.277.1.4.2.1.94
Number of Midspan repeaters in a link to be punched thru for DS0 far end testing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportDS0TestPatternSync 4.1.277.1.4.2.1.95
While DS0 far end testing, the DS0 pattern has detected the pattern four consecutive times. If the pattern is lost, this variable will be equal to one.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportDS0InjectBitError 4.1.277.1.4.2.1.96
While testing DS0 far end lpbk, setting this variable will inject a bit error into the test pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportDS0FarendLpbkType 4.1.277.1.4.2.1.97
The type of DS0 equipment to be looped back at the far end during DS0 far end testing. 1 - OCU 2 - DSU 3 - CSU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportDS0LpbkMode 4.1.277.1.4.2.1.98
This determines what mode the DS0 Processor will be set to. 1 - no lpbk 2 - switch lpbk 3 - far end lpbk.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportDS0SwitchLpbkStart 4.1.277.1.4.2.1.99
This is the first DS0 in a sting of consecutive DS0's to be looped back at the switch if the DS0 processor is set to switch loopback. If it's set to far end loopback, this determines which singleton DS0 will be monitored at the receive end.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportDS0SwitchLpbkEnd 4.1.277.1.4.2.1.100
This is the Last DS0, +1, in a sting of consecutive DS0's to be looped back at the switch if the DS0 processor is set to switch loopback. If the DS0 processor is set to far end loopback, this value will equal pportDS0SwitchLpbkStart + 1..
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportDS0FarendDS0InLpbk 4.1.277.1.4.2.1.101
This indicates the DS0 in far end loopback.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportDS0SendTestTraffic 4.1.277.1.4.2.1.102
Enable or Disable sending DS0 2047 test pattern for DS0 far end testing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportOc3LoopConfig 4.1.277.1.4.2.1.103
The loopback state of the ATM IWU OC3
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER oc3NoLoop(1), oc3AtmLoop(2), oc3SerPhyLoop(3), oc3ParPhyLoop(4)  

pportOc3LoopStatus 4.1.277.1.4.2.1.104
The current loopback status of the ATM IWU OC3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER oc3NoLoop(1), oc3AtmLoop(2), oc3SerPhyLoop(3), oc3ParPhyLoop(4)  

pportISDNIpBaseAddr 4.1.277.1.4.2.1.105
Specifies the base address used for IP Dynamic Address Assignment
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

pportSonetSTM1Scramble 4.1.277.1.4.2.1.106
Configured SONET/STM-1 scrambling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

pportEFCIMarking 4.1.277.1.4.2.1.107
Configured EFCI marking for cell traffic in Topaz IOMs
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

pportAtmQOSTransmitMode 4.1.277.1.4.2.1.108
Select fix priority or weighted round-robin for cell transmission in different ATM QOS classes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fix-priority(1), weighted-round-robin(2)  

pportHECMode 4.1.277.1.4.2.1.109
Configured ATM HEC single bit error correction routine.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

pportISDNChannelStatus 4.1.277.1.4.2.1.110
The ISDN call status of all the B-Channels on the pport are encoded into this 24 character, (for T1 ISDN PRI card...23B+D) or 31 character, (for E1 ISDN PRI card...30B+D ) ASCII string. The respective call state for each B-Channel is represented in its corresponding bit position. The D-Channel status is similarly encoded into the appropriate bit position (24th for T1) or (16th for E1). The encoding legend is as follows... I B-Channel is in Idle state R B-Channel is in Dialing (Ringing) state C B-Channel is in Connected (Active) state H B-Channel is in Releasing (Hanging-up) state U D-Channel is Up D D-Channel is Down
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

pportds1FarEndLoopStatus 4.1.277.1.4.2.1.111
DS1 Far End Loopback Status as commanded by the switch
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fe-noloop(1), fe-line-loop(2), fe-payload-loop(3)  

pportds1FDLControl 4.1.277.1.4.2.1.112
Enables or Disables FDL Function for DS1 ESF pport
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

pportds1FDLPrmXmit 4.1.277.1.4.2.1.113
Enables or Disables transmission of Performance Monitoring Report (PRM) messages on the DS1 ESF FDL
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

pportds1FDLPidXmit 4.1.277.1.4.2.1.114
Enables or Disables transmission of Path ID (PID) messages on the DS1 ESF FDL
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

pportds1FDLXmitPid 4.1.277.1.4.2.1.115
Transmit Path Id to be sent on the DS1 ESF FDL. (76 bytes)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

pportds1FDLRcvPid 4.1.277.1.4.2.1.116
The last path id message received on the DS1 ESF FDL. (76 bytes)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

pportds1FDLRcvTsid 4.1.277.1.4.2.1.117
The last test id message received on the DS1 ESF FDL. (76 bytes)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

pportSonetSDHFramingMode 4.1.277.1.4.2.1.118
The Framing mode for SONET/SDH port interface types.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2)  

pportds1InbandLoopType 4.1.277.1.4.2.1.119
Integer used to distinguish Inband Line loopback code sent from the switch when commanding inband line loopbacks, and reckognized by the switch when responding to remote loopback commands
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ds1CSU(1), ds1NI(2)  

pportESFDataLinkStatus 4.1.277.1.4.2.1.120
The current status of the DS1 ESF (FDL) data link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inService(1), outOfService(2)  

pportPMTcaId 4.1.277.1.4.2.1.121
This object identifies the the most recently declared pport threshold crossing alert
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER currentThresholdCVL(1), currentThresholdESL(2), currentThresholdSESL(3), currentThresholdUASL(4), currentThresholdCVP(5), currentThresholdESP(6), currentThresholdSESP(7), currentThresholdSASP(8), currentThresholdCSSP(9), currentThresholdUASP(10), currentThresholdCVS(11), currentThresholdESS(12), currentThresholdSESS(13), currentThresholdESx(14), dayThresholdCVL(15), dayThresholdESL(16), dayThresholdSESL(17), dayThresholdUASL(18), dayThresholdCVP(19), dayThresholdESP(20), dayThresholdSESP(21), dayThresholdSASP(22), dayThresholdCSSP(23), dayThresholdUASP(24), dayThresholdCVS(25), dayThresholdESS(26), dayThresholdSESS(27), dayThresholdESx(28), currentThresholdCVCPP(29), currentThresholdESCPP(30), currentThresholdSESCPP(31), currentThresholdSASCPP(32), currentThresholdUASCPP(33), dayThresholdCVCPP(34), dayThresholdESCPP(35), dayThresholdSESCPP(36), dayThresholdSASCPP(37), dayThresholdUASCPP(38), currentThresholdCVCPPFE(39), currentThresholdESCPPFE(40), currentThresholdSESCPPFE(41), currentThresholdSASCPPFE(42), currentThresholdUASCPPFE(43), dayThresholdCVCPPFE(44), dayThresholdESCPPFE(45), dayThresholdSESCPPFE(46), dayThresholdSASCPPFE(47), dayThresholdUASCPPFE(48)  

pportBchanTimerValue 4.1.277.1.4.2.1.122
This value is used on a per port basis to add a delay to answering a ISDN call of the initial Disconnect from the network. This due to the ARP cache not updating quick enough on the routers
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportAAL5CRC32Error 4.1.277.1.4.2.1.123
Number of received AAL5 packets with CRC32 errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportAAL5CPIError 4.1.277.1.4.2.1.124
Number of received AAL5 packets with CPI errors The only valid value currently defined for the CPI field is all zeros
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportAAL5LengthError 4.1.277.1.4.2.1.125
Number of received AAL5 packets which satisfied one of the following error conditions: 1. number of received cells * 48 bytes - length value in trailer > 55 bytes 2. number of received cells * 48 bytes - length value in trailer < 8 bytes
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportAAL5ReassemblyTimerError 4.1.277.1.4.2.1.126
Number of expired reassembly timers
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportAAL5MaxNrSegError 4.1.277.1.4.2.1.127
Number of received AAL5 packets which exceeds the maximum allowed length
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pportRedundancyArch 4.1.277.1.4.2.1.128
Pport redundancy architecture. Default is disabled. aps-intracard -- ports are both on same card. aps-with-resilient-uni -- ports may be on different cards, resilient UNI is used to reroute traffic. aps-intercard-trunk-backup -- ports may be on different cards, aps keeps phy layer in sync w/trunk backup.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), aps-intracard(2), aps-with-resilient-uni(3), aps-with-trunk-backup(4)  

pportAPSadminDir 4.1.277.1.4.2.1.129
Provisioned APS switch-direction-mode. Default is uni- directional.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uni-directional(1), bi-directional(2)  

pportAPSlineType 4.1.277.1.4.2.1.130
APS line type for the pport. Writable only when pportRedundancyArch is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER working-line(1), protection-line(2)  

pportAPSrevertiveMode 4.1.277.1.4.2.1.131
APS revertive mode. When revertive, after the condition for an automatic switchover clears, user traffic will be switched back to the working line after the pportAPSwtrPeriod expires. Default is revertive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER revertive(1), nonrevertive(2)  

pportAPSpairedSlotId 4.1.277.1.4.2.1.132
Slot ID of the paired-with APS pport. Writable only when pportRedundancyArch is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

pportAPSpairedPportId 4.1.277.1.4.2.1.133
Pport ID of the paired-with APS pport. Writable only when pportRedundancyARch is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportAPSsfBerThresh 4.1.277.1.4.2.1.134
Exponent N for APS Signal Failure based on BER. A line bit-error-rate above 10^-N causes an SF BER failure to be asserted. SF BER is cleared when the line BER returns to less than 10^-7.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 3..5  

pportAPSsdBerThresh 4.1.277.1.4.2.1.135
Exponent N for APS Signal Degrade based on BER. A line bit-error-rate above 10^-N causes an SD BER failure to be asserted. SD BER is cleared when the line BER returns to less than 10^-(N+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 6..9  

pportAPSwtrPeriod 4.1.277.1.4.2.1.136
APS wait-to-restore period. The number of minutes to wait after an automatic switch condition clears before switching back to the working line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..12  

pportAPSprotectionLineState 4.1.277.1.4.2.1.137
Indicates the state of the protection line selector. When selected, a protection switchover has taken place and user traffic is being selected from the protection line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER released(1), selected(2)  

pportAPSxCommand 4.1.277.1.4.2.1.138
External switch commands. The clear command clears any previously activated external command. Manual switch is preemptable by auto-switch-requests (line failures) while forced switch is not preemptable (except if the protection line fails). Manual and forced switch from protection to working, is valid only for 1+1 mode. Exercise simulates a switchover using APS signalling without actually performing a switch to protection line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), lockout-protection(2), forced-switch-w-to-p(3), forced-switch-p-to-w(4), manual-switch-w-to-p(5), manual-switch-p-to-w(6), exercise(7)  

pportAPSconfigStatus 4.1.277.1.4.2.1.139
Status of APS pport configuration. The not-configured status indicates the pport APS feature is not configured or it is a non-APS pport. The valid state indicates the pport APS function is configured and has been validated by the APS manager. The invalid state indicates that the APS manager has detected a conflict between the working line and protection line pport configurations. The user must clear the invalid state by changing the configuration of the misconfigured pport as soon as possible. Check pportAPSadminDir, pportAPSlineType, pportAPSrevertiveMode, and pportAPSwtrPeriod for any misconfigurations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-configured(1), valid(2), invalid(3)  

pportAPSOperRxStatus 4.1.277.1.4.2.1.140
The current state of the pair of APS pports with respect to the ability of the pair to Receive user traffic. When indicated as up, user traffic may be received on at least one of the ports in the APS pair.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

pportBertPattern 4.1.277.1.4.2.1.141
Pattern generated by the XBERT
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER allZeros(1), allOnes(2), oneZero(3), oneOneZeroZero(4), oneOf8(5), threeOf24(6), qRSS(7), user1Byte(8), user2Byte(9), user3Byte(10), user4Byte(11)  

pportBertUserBytes 4.1.277.1.4.2.1.142
Definition of 1,2,3 or 4 byte pattern if UserNByte selected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportBertErrorRate 4.1.277.1.4.2.1.143
Error rate to insert in generated pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), tenMinusThree(2), tenMinusSix(3)  

pportBertCommand 4.1.277.1.4.2.1.144
Single shot commands to the BERT.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER start(1), stop(2), clearCounters(3), injectError(4)  

pportBertStatus 4.1.277.1.4.2.1.145
Current status of the BERT for this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unused(1), unavailable(2), outOfFrame(3), inFrame(4)  

pportBertBitCount 4.1.277.1.4.2.1.146
The number of bits received - stops counting at 0xFFFFFFFF
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

pportBertErrorCount 4.1.277.1.4.2.1.147
The number of bits received in error- stops counting at 0xFFFFFFFF
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

pportds1FELoopbackControl 4.1.277.1.4.2.1.148
Enables or Disables Far end loopback control of the switch. Enabled (2) = Loop up and down commands from far end equipment will be processed. Disabled (1) - loop up and down commands from far end equipment shall be ignored. This control does not affect the switch's transmission of loopback commands to the far end
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

pportFT1DS0s 4.1.277.1.4.2.1.149
DS0 usage bitmask for Fractional T1/E1 data rates.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pportIMUXCnt 4.1.277.1.4.2.1.150
DS3 Inverse Multiplexer counter value - specifies number of idle cells to insert by the outbound process Hardware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportds1PMConfigThresh 4.1.277.1.4.2.1.151
The setting determines which standard is used for performance monitoring configuration thresholds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rfc1406(1), itu-g826(2)  

pportIdleCellType 4.1.277.1.4.2.1.152
The setting determines the type of Idle/unassigned cell transmitted by the pport. 1 -- ATM Forum CLP=0, payload=6A 2 -- ITU CLP=1, payload=6A
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER atmforum(1), itu(2)  

pportATMTcaInHECErrorUAlertPeriod 4.1.277.1.4.2.1.153
ATM tca ingress HEC error uncorrectable alert period (in min.).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaInHECErrorUThresh 4.1.277.1.4.2.1.154
ATM tca ingress HEC error uncorrectable threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaEBufOverflowCBRAlertPeriod 4.1.277.1.4.2.1.155
ATM tca egress buffer overflow CBR Alert period (in min)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaEBufOverflowCBRThresh 4.1.277.1.4.2.1.156
ATM tca egress buffer overflow CBR threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaEBufOverflowABRAlertPeriod 4.1.277.1.4.2.1.157
ATM tca egress buffer overflow ABR alert period (in min)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaEBufOverflowABRThresh 4.1.277.1.4.2.1.158
ATM tca egress buffer overflow ABR threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaEBufOverflowVBR1AlertPeriod 4.1.277.1.4.2.1.159
ATM tca egress buffer overflow VBR1 alert period (in min)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaEBufOverflowVBR1Thresh 4.1.277.1.4.2.1.160
ATM tca egress buffer overflow VBR1 threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaEBufOverflowVBR2AlertPeriod 4.1.277.1.4.2.1.161
ATM tca egress buffer overflow VBR2 alert period (in min)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaEBufOverflowVBR2Thresh 4.1.277.1.4.2.1.162
ATM tca egress buffer overflow VBR2 threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaInFramerFIFOOverflowAlertPeriod 4.1.277.1.4.2.1.163
ATM tca ingress framer FIFO overflow alert period (in min)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaInFramerFIFOOverflowThresh 4.1.277.1.4.2.1.164
ATM tca ingress framer FIFO overflow threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaELookupFailureAlertPeriod 4.1.277.1.4.2.1.165
ATM tca egress lookup failure alert period (in min)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaELookupFailureThresh 4.1.277.1.4.2.1.166
ATM tca egress lookup failure threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaEnable 4.1.277.1.4.2.1.167
ATM tca port enable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pportATMTcaId 4.1.277.1.4.2.1.168
This object identifies the the most recently declared pport ATM threshold crossing alert
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ingressHECErrorUThresholdC(1), egressCBRBufferOverflowC(2), egressABRBufferOverflowC(3), egressVBR1BufferOverflowC(4), egressVBR2BufferOverflowC(5), ingressFramerFIFOOverflowC(6), egressLookupFailureC(7)  

pportFethAdminMacAddr 4.1.277.1.4.2.1.169
The configured MAC address to use for this Fast Ethernet port. Setting this to all zeros will force the port to use the burned in MAC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

pportFethOperMacAddr 4.1.277.1.4.2.1.170
The actual MAC address in use for this Fast Ethernet port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

pportConfigAlarmSoakTime 4.1.277.1.4.2.1.171
This is the soak time for configurable alarms. An alarm of this type must persist for this period before it is declared. The time is specified in millseconds units.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pportConfigAlarmClearTime 4.1.277.1.4.2.1.172
This is the soak time for configurable alarms. An alarm of this type must remain clear for this period before it is declared to be cleared. The time is specified in millseconds units.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pportFethPortCapability 4.1.277.1.4.2.1.173
Selection for the speed (10/100) and mode (half/full duplex) of operation for Fast Ethernet ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fullDuplex100Mbps(1), halfDuplex100Mbps(2), fullDuplex10Mbps(3), halfDuplex10Mbps(4)  

pportVpshapingDiscardCellCount 4.1.277.1.4.2.1.174
Cells discarded due to buffer overflow on this pport because of traffic shaping.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pportTrafficShaperTable 4.1.277.1.4.3
A list of Parameters assigned to the 16 traffic shaper parameter conbinations of each pport of the ATM-IWU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PportTrafficShaperEntry

pportTrafficShaperEntry 4.1.277.1.4.3.1
Information of a single system reference clock source.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PportTrafficShaperEntry  

pportTrafficShaperIndex 4.1.277.1.4.3.1.1
A positive integer to identify an entry in the pportTrafficShaperTable. The ATM-IWU and CS cards support exactly 16 shapers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

pportTrafficShaperPriority 4.1.277.1.4.3.1.2
The priority of the Shaper. Channels tied to a Shaper are served only if no higher priority Shapers await service. 0 ist the highest, 15 the lowest priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

pportTrafficShaperCellRatioDividend 4.1.277.1.4.3.1.3
The quotient of pportTrafficShaperCellRatioDividend and pportTrafficShaperCellRatioDivisor determines the average rate allocated to the shaper. The shaper serves portTrafficShaperCellRatioDividend cells in pportTrafficShaperCellRatioDivisor cell times.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

pportTrafficShaperCellRatioDivisor 4.1.277.1.4.3.1.4
See pportTrafficShaperCellRatioDividend
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16777215  

pportTrafficShaperPeak 4.1.277.1.4.3.1.5
The peak cell rate. It defines the minimum gap (in cell units) between emission of any consecutive cells in this channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

pportTrafficShaperCredit 4.1.277.1.4.3.1.6
Defines the maximum number of credits that can be accumulated by a shaper. This is equivalent to the maximum burst allowed at the peak rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

lportTable 4.1.277.1.5.1
A list of logical port entries. The number of entries is given by the value of ifNumber in MIB-II.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LportEntry

lportEntry 4.1.277.1.5.1.1
The logical port entry contains objects relevant to a logical port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LportEntry  

lportIfIndex 4.1.277.1.5.1.1.1
The ifIndex value of the corresponding ifEntry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Index  

lportSlotId 4.1.277.1.5.1.1.2
The slot number of the board the port is on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportPportId 4.1.277.1.5.1.1.3
The physical port number of the interface on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportId 4.1.277.1.5.1.1.4
The logical port number of the interface on the physical port. A logical port can be uniquely identified in a Cascade network as { NodeId.lportSlotId.lportPportId.lportId }. lportId is defaulted to 1 (i.e., one-to-one mapping between the physical port and the logical port such as local V.35 or carrier) except the following cases: - For ufr, nfr and trk logical port, it indicates the bundle number for fractional T1 or 24-bundle T1. - For pdntrk logical port, it indicates the dlci over the PDN. Note that pdntrk is not allowed on fractional T1 or 24-bundle T1 physical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  


lportProtocol 4.1.277.1.5.1.1.6
The data link protocol running on the logical port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nfr(1), fradPPPto1294(2), smds(3), atm(4), isdndchan(5), dirmgmttrk(7), smdsoptmgmt(8), atmAAL1(10)  

lportSignal 4.1.277.1.5.1.1.7
The user-network signalling capability for SVC and DLCMI of the logical port. Note that this only applies to fr protocol port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dce(1), dte(2), nni(3)  

lportFt1Ds0s 4.1.277.1.5.1.1.8
The bit mask indicating the DS0s for the fractional T1/E1 logical port which must be a subset of the corresponding pportDs1Ds0s. It's represented by a 32-bit hex char string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportGlobalDlci 4.1.277.1.5.1.1.9
The global DLCI correspondent to the interface if the DLCI is globally significant in the network. Note that this object is read-write only during creation, and read-only after creation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportDlcmiStd 4.1.277.1.5.1.1.10
This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame Relay interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), lmiRev1(2), ansiT1-617-D(3), ccittQ-933-A(4), autodetect(5), ansiT1-617-B(6)  

lportDlciAddrFmt 4.1.277.1.5.1.1.11
This variable states which address format is in use on the Frame Relay interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER q922(1)  

lportDlciAddrLen 4.1.277.1.5.1.1.12
This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address including the control portion.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER two-octets-10-bits(1), three-octets-10-bits(2), three-octets-16-bits(3), four-octets-17-bits(4), four-octets-23-bits(5)  

lportMaxFramesize 4.1.277.1.5.1.1.13
The maximum frame size supported on the interface. Currently it's not used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportDceVerifTimer 4.1.277.1.5.1.1.14
The polling verification timer (secs) on the DCE interface. If the port is configured as a DXI/SNI, then this MIB object defines the heartbeat poll timer setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportDceErrorThresh 4.1.277.1.5.1.1.15
The error threshold on the DCE interface. If the port is configured as a DXI/SNI, then this MIB object defines the heartbeat poll No Ack threshold setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportDceEventCount 4.1.277.1.5.1.1.16
The monitored events count on the DCE interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportDteErrorThresh 4.1.277.1.5.1.1.17
The error threshold on the DTE interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportDteEventCount 4.1.277.1.5.1.1.18
The monitored events count on the DTE interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportDtePollTimer 4.1.277.1.5.1.1.19
The link status polling timer (secs) on the DTE interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportDteFullCounter 4.1.277.1.5.1.1.20
The full status polling counter on the DTE interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportDteMulticast 4.1.277.1.5.1.1.21
The multicast capability of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER one-way(1), two-way(2), m-way(3)  

lportTrkRnode 4.1.277.1.5.1.1.22
Node at the other end of the trunk. This object is read-write only during lport creation, and read-only thereafter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

lportTrkRlport 4.1.277.1.5.1.1.23
Logical port (IfIndex) at the other end of the trunk. This
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportCongestState 4.1.277.1.5.1.1.24
Congestion State for the logical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), mild(2), severe(3), critical(4)  

lportQP1Len 4.1.277.1.5.1.1.25
Priority-1 queue length (number of packets) in xmit buffer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportQP2Len 4.1.277.1.5.1.1.26
Priority-2 queue length (number of packets) in xmit buffer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportQP3Len 4.1.277.1.5.1.1.27
Priority-3 queue length (number of packets) in xmit buffer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportQP4Len 4.1.277.1.5.1.1.28
Priority-4 queue length (number of packets) in xmit buffer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportErrTime 4.1.277.1.5.1.1.29
The value of sysUpTime at which the last error was detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

lportErrType 4.1.277.1.5.1.1.30
The type of error that was last seen on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER short-frame(1), hdlc-abort(2), residual-bit(3), crc-Error(4), rcv-Long(5), rcv-overrun(6), tx-underrun(7), unknownError(8), illegalDLCI(9), unknownDLCI(10), dlcmiProtoErr(11), dlcmiUnknownIE(12), dlcmiSequenceErr(13), dlcmiUnknownRpt(14), unknownProt(15), discardFW(16), discardRange(17), discardPortMismatch(18), discardIllegalLen(19)  

lportErrData 4.1.277.1.5.1.1.31
An octet string containing as much of the error packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desirable to include all information up to the PDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportDiagTestId 4.1.277.1.5.1.1.32
Identification for the diagnostics tests to be run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportDiagTestRuns 4.1.277.1.5.1.1.33
Number of passes of the diagnostics tests to be run. The default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportDataRate 4.1.277.1.5.1.1.34
An estimate of the logical port's data rate in bits per second.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportTrkStatus 4.1.277.1.5.1.1.35
The current state of the trunk. The btdefined state only applies to backup trunks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nattempt(1), ninit(2), n2way(3), nexstart(4), nexchange(5), nloading(6), nfull(7), btdefined(9)  

lportSevCongests 4.1.277.1.5.1.1.36
The cumulative number of times that the lport's congestion state has changed from mildly-congested to severely-congested since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportAbsCongests 4.1.277.1.5.1.1.37
The cumulative number of times that the lport's congestion state has changed from severely-congested to absolutely- congested since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportTrkOverhead 4.1.277.1.5.1.1.38
An estimate of the overhead (headers and internal control messages) in trunking user data in terms of a percentage of the configured trunk bandwidth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportTrkUtil 4.1.277.1.5.1.1.39
An estimate of the real utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportVAvailbw 4.1.277.1.5.1.1.40
Currently available virtual trunk bandwidth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportTrkLastTimeChange 4.1.277.1.5.1.1.41
The sysUpTime value when the trunk was last changed to the current status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

lportCongestRate 4.1.277.1.5.1.1.42
The rate (%) of entering severely or absolutely congested states in the last one minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportCongestRateThresh 4.1.277.1.5.1.1.43
The alert threshold (%) for the CongestRate; trap will be sent when exceeded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportDiagState 4.1.277.1.5.1.1.44
The current state of the diagnostic on this logical port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1)  

lportDiagOptionStr 4.1.277.1.5.1.1.45
Optional parameters to the diagnostic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

lportDiagPassCount 4.1.277.1.5.1.1.46
Number of successful diagnostic passes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportDiagFailCount 4.1.277.1.5.1.1.47
Number of failed diagnostic passes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportDiagResultStr 4.1.277.1.5.1.1.48
Description of last diagnostic failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

lportDs0BitStuff 4.1.277.1.5.1.1.49
Is bit stuffing enabled on this lport?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bit-stuffing(1)  

lportErrorThreshold 4.1.277.1.5.1.1.50
The per minute error threshold before a link error trap is sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportUnsyncBandwidth 4.1.277.1.5.1.1.51
The accumulated allocated/deallocated bandwidth which has not been propagated by OSPF yet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportDTEInStatusFrames 4.1.277.1.5.1.1.52
The number of LMI STATUS frames received from the DCE since the last system reset. The count includes link integrity verification frames only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDTEInFullStatusFrames 4.1.277.1.5.1.1.53
The number of LMI Full STATUS frames received from the DTE since the last system reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDTEInAsyncStatusFrames 4.1.277.1.5.1.1.54
The number of asynchronous LMI Status frames received from the DTE since the last system reset. For LMI Rev 1, these are Update STATUS frames. For ANSI Annex D and CCITT Annex A these are Asynchronous STATUS frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDTEInErrorFrames 4.1.277.1.5.1.1.55
The number of LMI frames received containing protocol errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDTEOutPollFrames 4.1.277.1.5.1.1.56
The number of LMI Status Enquiry frames transmitted since the last system reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDTEPollErrorCounts 4.1.277.1.5.1.1.57
The number of DTE in-channel signaling link reliability errors (i.e. LMI Status Enquiry frames that were not responded to, sequence number errors) since the last system reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDTEFailCounts 4.1.277.1.5.1.1.58
The number of times since the last system reset LMI has declared the DTE side of the link down due to excessive errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDTEFailReason 4.1.277.1.5.1.1.59
The LMI failure reason. If the rate of LMI detected errors exceeds the threshold, this contains the cause of the most recent error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dte-bad-Nr(1), dte-timeout(2), prot-error(3)  

lportDTEOperStatus 4.1.277.1.5.1.1.60
The operational status of the DTE side of LMI on this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

lportDCEInPollFrames 4.1.277.1.5.1.1.61
The number of LMI poll frames received from the DTE since the last system reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDCEInErrorFrames 4.1.277.1.5.1.1.62
The number of LMI frames received containing protocol errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDCEOutStatusFrames 4.1.277.1.5.1.1.63
The number of LMI STATUS frames transmitted since the last system reset. The count includes link integrity verification frames only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDCEOutFullStatusFrames 4.1.277.1.5.1.1.64
The number of LMI Full STATUS frames transmitted since the last system reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDCEOutAsyncStatusFrames 4.1.277.1.5.1.1.65
The number of asynchronous LMI Status frames transmitted since the last system reset. For LMI Rev 1, these are Update STATUS frames. For ANSI Annex D and CCITT Annex A these are Asynchronous STATUS frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDCEPollErrorCounts 4.1.277.1.5.1.1.66
The number of DCE in-channel signaling link reliability errors (i.e. timeouts waiting for LMI Status Enquiry frames, sequence number errors) since the last system reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDCEFailCounts 4.1.277.1.5.1.1.67
The number of times since the last system reset LMI has declared the DCE side of the link down due to excessive errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDCEFailReason 4.1.277.1.5.1.1.68
The LMI failure reason. If the rate of LMI detected errors exceeds the threshold, this contains the cause of the most recent error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dce-bad-Nr(1), dce-timeout(2), prot-error(3)  

lportDCEOperStatus 4.1.277.1.5.1.1.69
The operational status of the DCE side of LMI on this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

lportDCEOperDlcmiStd 4.1.277.1.5.1.1.70
This variable states which Data Link Connection Management scheme is actually being run on this link. This is used for DCE links configured for AutoDetect and indicates the LMI standard used in the last poll received from the DTE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), lmiRev1(2), ansiT1-617-D(3), ccittQ-933-A(4), reserved(5), ansiT1-617-B(6)  

lportLMIInErrorFrames 4.1.277.1.5.1.1.71
The number of total frames received with an error. For NNI links this is the sum of lportDTEInErrorFrames and lportDCEInErrorFrames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportDCEnN4 4.1.277.1.5.1.1.72
This variable specifies the maximum number of LMI Status Enquiry frames that can be received from a DTE within time interval lportDCEnT3. This is only valid on lports using LMIREV1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportDCEnT3 4.1.277.1.5.1.1.73
This variable specifies the time interval (secs) used to determine if lportDCEnN4 an excess number (lportDCEnN4) of Status Enquiry messages are received. This is only valid on lports using LMIREV1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportXmitLatencyThreshold 4.1.277.1.5.1.1.74
Outbound frames are allowed on the transmit commit queue when the commit queue falls below this threshold (in microseconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportXmitRefillPriority0Percentage 4.1.277.1.5.1.1.75
Percentage of time the transmit queue is refilled in priority order 0, 1, 2, 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportXmitRefillPriority1Percentage 4.1.277.1.5.1.1.76
Percentage of time the transmit queue is refilled in priority order 1, 2, 3, 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportXmitRefillPriority2Percentage 4.1.277.1.5.1.1.77
Percentage of time the transmit queue is refilled in priority order 2, 3, 0, 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportXmitRefillPriority3Percentage 4.1.277.1.5.1.1.78
Percentage of time the transmit queue is refilled in priority order 3, 0, 1, 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportXmitDiscardLow 4.1.277.1.5.1.1.79
Priority holding queue low water discard threshold. Discarding stops when holding queue hits this level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportSevereThreshold 4.1.277.1.5.1.1.80
Severe congestion level. Outbound red and amber packets are discarded when the transmit queue hits this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportMildThreshold 4.1.277.1.5.1.1.81
Mild congestion level. Outbound red packets are discarded when the transmit queue hits this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportTrkKeepAliveTimer 4.1.277.1.5.1.1.86
Send a keep-alive packet after this many seconds. These packets are sent on trunk links only. The range is 0 thru 15, with zero meaning the keep-alive protocol is disabled. The default is one.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportTrkKeepAliveErrorThreshold 4.1.277.1.5.1.1.87
Declare the interface down after this many keep-alive packets in a row are missed. The default is five.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportIgCutThruStatus 4.1.277.1.5.1.1.88
Enable ingress cut-thru on this user lport. Default is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

lportEgCutThruStatus 4.1.277.1.5.1.1.89
Enable egress cut-thru on this user lport. Default is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

lportEgCutThruThresh 4.1.277.1.5.1.1.90
Egress cut thru threshold - start transmitting a frame on a user port after this many segments have arrived.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportFrameRelayTrkEnable 4.1.277.1.5.1.1.91
Allow Frame Relay Trunks on the user link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER allowed(1), not-allowed(2)  

lportSmdsSsiIf 4.1.277.1.5.1.1.92
The interface number of the SSI which this DXI/SNI is multiplexed to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportSmdsSsiSlot 4.1.277.1.5.1.1.93
The slot of the SSI which this DXI/SNI is multiplexed to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportSmdsScrnId 4.1.277.1.5.1.1.94
The ID of address screen for this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportSmdsIaScrnOp 4.1.277.1.5.1.1.95
Individual address screen operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER allow(1), disallow(2)  

lportSmdsGaScrnOp 4.1.277.1.5.1.1.96
Group address screen operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER allow(1), disallow(2)  

lportSmdsIaScrnMap 4.1.277.1.5.1.1.97
The individual address screen member bit map. For set request, the first byte is the operation : 1 for deleting, 2 for adding. The following bytes are the bit map. The bit position of each bit in this bit map represent a screen member ID. The most significant bit is corresponding to group address ID 1. For get response, The whole string is the bit map.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

lportSmdsGaScrnMap 4.1.277.1.5.1.1.98
The group address screen member bit map. For set request, the first byte is the operation : 1 for deleting, 2 for adding. The following bytes are the bit map. The bit position of each bit in this bit map represent a screen member ID. The most significant bit is corresponding to group address ID 1. For get response, The whole string is the bit map.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

lportSmdsTrkAddr 4.1.277.1.5.1.1.99
SMDS address. For SSI feeder port, this address is the local address of all SMDS optimim paths associated with this SSI feeder port. For SSI Optimum path port, this address is the remote address of this SSI optimum path. The 4 most significant bits are 1100. The following 4 bits are 0001. The following 5 bytes are the 10 digits number in BCD format. The following 16 bits are padded with 1's
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

lportSmdsCrc 4.1.277.1.5.1.1.100
CRC which CPE generates.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER crc16(1), crc32(2)  

lportSmdsCpePoll 4.1.277.1.5.1.1.101
Whether CPE supports heart beat poll or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nopoll(1), poll(2)  

lportSmdsPduCheck 4.1.277.1.5.1.1.102
turn of/off the detailed SIP3 PDU error checking.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1)  

lportSmdsCntOutFrDxi2HbPolls 4.1.277.1.5.1.1.103
Number of DXI2 heart beat poll frames transmitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntOutByteDxi2HbPolls 4.1.277.1.5.1.1.104
Total number of octets in DXI2 heart beat poll frames transmitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntInFrDxi2HbPolls 4.1.277.1.5.1.1.105
Number of DXI2 heart beat poll frames received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntInByteDxi2HbPolls 4.1.277.1.5.1.1.106
Total number of octets in DXI2 heart beat poll frames received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntOutFrSip3s 4.1.277.1.5.1.1.107
Number of SIP3 frames transmitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntOutByteSip3s 4.1.277.1.5.1.1.108
Total number of octets in SIP3 frames transmitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntInFrSip3s 4.1.277.1.5.1.1.109
Number of SIP3 frames received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntInByteSip3s 4.1.277.1.5.1.1.110
Total number of octets in SIP3 frames received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntDxi2LinkIdInvalids 4.1.277.1.5.1.1.111
Number of instances that DXI2 link ID is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntDxi2StationIdInvalids 4.1.277.1.5.1.1.112
Number of instances that DXI2 station ID is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntDxi2CrInvalids 4.1.277.1.5.1.1.113
Number of instances that DXI2 command/response field is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntDxi2AeInvalids 4.1.277.1.5.1.1.114
Number of instances that DXI2 address extension field is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntDxi2CtrlInvalids 4.1.277.1.5.1.1.115
Number of instances that DXI2 control field is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntDxi2FrameSizeErrors 4.1.277.1.5.1.1.116
Number of instances there is a DXI2 frame size error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3RsvdInvalids 4.1.277.1.5.1.1.117
Number of instances that SIP3 reserved field in header is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3BetagMismatchs 4.1.277.1.5.1.1.118
Number of instances that SIP3 BE tag is not macthed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3BasizeIncorrects 4.1.277.1.5.1.1.119
Number of instances that SIP3 BA size is incorrect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3BasizeInvalids 4.1.277.1.5.1.1.120
Number of instances that SIP3 BA size is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3DaTypeInvalids 4.1.277.1.5.1.1.121
Number of instances that SIP3 destination address type is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3DaInvalids 4.1.277.1.5.1.1.122
Number of instances that SIP3 destination address is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3SaTypeInvalids 4.1.277.1.5.1.1.123
Number of instances that SIP3 source address type is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3SaInvalids 4.1.277.1.5.1.1.124
Number of instances that SIP3 source address is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3BasizeMismatchs 4.1.277.1.5.1.1.125
Number of instances that SIP3 BA sizes in the header and trailer are not matched.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3HeLenInvalids 4.1.277.1.5.1.1.126
Number of instances that SIP3 header extension length is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3HeVersionInvalids 4.1.277.1.5.1.1.127
Number of instances that SIP3 header extension version is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3HeCarrierInvalids 4.1.277.1.5.1.1.128
Number of instances that SIP3 header extension carrier is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3Crc32Errors 4.1.277.1.5.1.1.129
Number of SIP3 CRC errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSip3TRsvdInvalids 4.1.277.1.5.1.1.130
Number of instances that SIP3 reserved field in trailer is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSaNotFounds 4.1.277.1.5.1.1.131
Number of instances that source address not found.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSaValidationFails 4.1.277.1.5.1.1.132
Number of instances that source address validation failed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSaDaOnSamePorts 4.1.277.1.5.1.1.133
Number of instances that source address and destination addresses are on the same port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntDaSsiMismacths 4.1.277.1.5.1.1.134
Obsolete.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSsiProvisionErrors 4.1.277.1.5.1.1.135
Obsolete.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntDstIaNotFounds 4.1.277.1.5.1.1.136
Number of instances that destination individual address not found.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntDstGaNotFounds 4.1.277.1.5.1.1.137
Number of instances that destination group address not found.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntSrcIaScrnFails 4.1.277.1.5.1.1.138
Number of instances that source individual address screening failed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntDstIaScrnFails 4.1.277.1.5.1.1.139
Number of instances that destination individual address screening failed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsCntDstGaScrnFails 4.1.277.1.5.1.1.140
Number of instances that destination group address screening failed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsTotalDiscards 4.1.277.1.5.1.1.141
total number of discards.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportSmdsSsiNode 4.1.277.1.5.1.1.142
The Node of the SSI which this DXI/SNI is multiplexed to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportBilling 4.1.277.1.5.1.1.143
This object defines the ability to enable and disable billing on this logical port (for SMDS this must be a DXI). When the value of nodeBilling is 'enabled', the value of this object will take precedence. When the value of nodeBilling is 'disabled', the value of this object will be overridden and billing will be disabled. The default value of this object is 'disabled'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

lportSmdsReserved144 4.1.277.1.5.1.1.144
reserved! ignore!
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportLinkStatus 4.1.277.1.5.1.1.145
Link protocol status. The Link protocol may be frame relay LMI, DXI heart beat poll, PPP LCP, etc, depends on the lport type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

lportLMIDelay 4.1.277.1.5.1.1.146
The number of seconds 1-9 to buffer (or initiate) a FR LMI async update (or ATM OAM alarms) to allow filtering of LMI async events. Zero (0) indicates that no buffering is done (all updates are immediate) and 255 indicates that no updates are sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportCRC 4.1.277.1.5.1.1.147
Lport CRC selection: 0 - 16 bit CRC 1 - 32 bit CRC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportSmdsMulticastGa 4.1.277.1.5.1.1.148
The Multicast Group Address is the smds broadcast address which is used to get smds address from its IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

lportSmdsMulticastIpAddr 4.1.277.1.5.1.1.149
This IP address is this logical port's IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

lportAtmVPI 4.1.277.1.5.1.1.150
VPI value in the ATM cell header: ATM DXI with HSSI IOP VPI (4 lsb bit) range: 0 - 15 ATM UNI DS3/E3 IOP VPI (4 lsb bit) range: 0 - 15
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportAtmVCI 4.1.277.1.5.1.1.151
VCI value in the ATM cell header: ATM DXI with HSSI IOP VCI (6 lsb bit) range: 0 - 63 ATM UNI DS3/E3 IOP VCI (8 lsb bit) range: 0 - 255
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportPeakCellRateindex 4.1.277.1.5.1.1.152
Peak cell rate queue index
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportSustCellRate 4.1.277.1.5.1.1.153
Sustainable cell rate in cell/second
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportBurstTolerance 4.1.277.1.5.1.1.154
Burst Tolerance in multiple of 32 cells
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportBuTrkOnFailure 4.1.277.1.5.1.1.155
Enables or disables trunk backup due to link down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1)  

lportTrkFailureThrsh 4.1.277.1.5.1.1.156
The number of seconds a primary trunk must remain down for trunk backup to be initiated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportTrkRestThrsh 4.1.277.1.5.1.1.157
The number of seconds a primary trunk must remain up for trunk backup to be terminated
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportBuTrkRetryInt 4.1.277.1.5.1.1.158
The number of seconds between backup trunk call setup retries.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportBuTrkRetryNum 4.1.277.1.5.1.1.159
The number of backup trunk call setup tries per call setup cycle.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportBuTrkCycleInt 4.1.277.1.5.1.1.160
The number of seconds between backup trunk call setup cycles.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportTrkManualBu 4.1.277.1.5.1.1.161
Initiate or terminate manual backup for a primary trunk. none neither initiate or terminate initCmd initiate operator commanded backup termCmd terminate operator commanded backup initSched initiate scheduled backup termSched terminate scheduled backup
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER initCmd(1), termCmd(2), initSched(3), termSched(4)  

lportPrimTrk 4.1.277.1.5.1.1.162
Indicates the primary trunk lportIfIndex for which a backup trunk is serving as a backup. This value is also used to determine trunk type by the following convention: Value Trunk Type 0 Normal lportIfIndex of this trunk Primary other lportIfIndex Backup
Status: mandatory Access: read-write
OBJECT-TYPE    
  Index  

lportInitCallSetup 4.1.277.1.5.1.1.163
TRUE if node must initiate backup trunk call setup for this primary trunk. Otherwise FALSE.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1)  

lportBuFailReason 4.1.277.1.5.1.1.164
Indicates the reason for the failure to perform trunk backup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER buTrkNotDef(1), buTrkNotEstab(2)  

lportQ922Enable 4.1.277.1.5.1.1.165
Set 1 to eanble Q.922 on this port. Q.922 must be enabled if the port is used for SVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

lportQ922State 4.1.277.1.5.1.1.166
Q.922 state. This object only makes sense when Q.922 is enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tei-unassigned(1), assign-awaiting(2), establish-awaiting(3), tei-assigned(4), awaiting-establishment(5), awaiting-release(6), multiple-frame-established(7), timer-recovery(8)  

lportTrkPduRevision 4.1.277.1.5.1.1.167
The Trunk PDU Revision number being used over this trunk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportPVCMgrPduRevision 4.1.277.1.5.1.1.168
The PVC Manager PDU Revision number being used over this trunk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportDS0LoopStatus 4.1.277.1.5.1.1.169
Indicates whether this logical port has one or more DS0's in loopback
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportISDNDuration 4.1.277.1.5.1.1.170
The number of seconds that the ISDN call has been established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportISDNSourceAddr 4.1.277.1.5.1.1.171
The E.164 address of the source of this ISDN connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportISDNDestAddr 4.1.277.1.5.1.1.172
The E.164 address of the destination of this ISDN connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportISDNIpAddr 4.1.277.1.5.1.1.173
The Ip Address of the client connected to this B-Channel
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

lportISDNCallRejCause 4.1.277.1.5.1.1.174
The cause of the call rejection - inability to authenticate or pool is busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportLastInvalidDLCI 4.1.277.1.5.1.1.175
This item pertains to user frame relay lports only. The frame relay header of the received frame contains a dlci, which uniquely identifies a specific pvc on this lport. When no pvc has been configured, on the lport, that corresponds to the dlci specified in the frame header, the frame is said to have an invalid dlci. This lport entry holds the value of the most recent invalid dlci received on this lport, to be used in troubleshooting faulty configurations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportTrkProtState 4.1.277.1.5.1.1.176
The current operational state of the link trunk protocol on this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), none(3)  

lportTrkTrafficMix 4.1.277.1.5.1.1.177
The types of traffic allowed over a Cascade trunk.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), management-only(2), management-and-PVCs(3), private(4)  

lportNumVC 4.1.277.1.5.1.1.178
The number of VCs going to or through a particular port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportTrkAdminCost 4.1.277.1.5.1.1.179
The administrative cost of the trunk. Used when routing circuits. Trunks with lower costs are preferred. Value ranges from 1 to 65,535.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportPrivateNet 4.1.277.1.5.1.1.180
If non-zero, indicates the private network that the lport belongs to. If 0, the lport is publicly shared.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportTrkStaticDelay 4.1.277.1.5.1.1.181
The measured round-trip delay of the trunk, in milliseconds. Measured when the trunk last became operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportTrkDynamicDelay 4.1.277.1.5.1.1.182
The recently measured round-tip delay of the trunk. May vary from lportTrkStaticDelay due to congestion, or reprovisioning of the underlying media.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportAtmDataRateQoS1 4.1.277.1.5.1.1.183
An estimate of the logical port's data rate in bits per second reserved for QoS class 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportAtmDataRateQoS2 4.1.277.1.5.1.1.184
An estimate of the logical port's data rate in bits per second reserved for QoS class 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportAtmDataRateQoS3 4.1.277.1.5.1.1.185
An estimate of the logical port's data rate in bits per second reserved for QoS class 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportAtmDataRateQoS4 4.1.277.1.5.1.1.186
An estimate of the logical port's data rate in bits per second reserved for QoS class 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportOutVAvailbwQoS1 4.1.277.1.5.1.1.187
Current outgoing available virtual bandwidth reserved for QoS class 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportOutVAvailbwQoS2 4.1.277.1.5.1.1.188
Current outgoing available virtual bandwidth reserved for QoS class 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportOutVAvailbwQoS3 4.1.277.1.5.1.1.189
Current outgoing available virtual bandwidth reserved for QoS class 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportOutVAvailbwQoS4 4.1.277.1.5.1.1.190
Current outgoing available virtual bandwidth reserved for QoS class 4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportInVAvailbwQoS1 4.1.277.1.5.1.1.191
Current incoming available virtual bandwidth reserved for QoS class 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportInVAvailbwQoS2 4.1.277.1.5.1.1.192
Current incoming available virtual bandwidth reserved for QoS class 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportInVAvailbwQoS3 4.1.277.1.5.1.1.193
Current incoming available virtual bandwidth reserved for QoS class 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportInVAvailbwQoS4 4.1.277.1.5.1.1.194
Currently incoming available virtual bandwidth reserved for QoS class 4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportOutAllocbwQoS1 4.1.277.1.5.1.1.195
Current outgoing allocated bandwidth for QoS Class 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportOutAllocbwQoS2 4.1.277.1.5.1.1.196
Current outgoing allocated bandwidth for QoS Class 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportOutAllocbwQoS3 4.1.277.1.5.1.1.197
Current outgoing allocated bandwidth for QoS Class 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportOutAllocbwQoS4 4.1.277.1.5.1.1.198
Current outgoing allocated bandwidth for QoS Class 4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportInAllocbwQoS1 4.1.277.1.5.1.1.199
Current incoming allocated bandwidth for QoS Class 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportInAllocbwQoS2 4.1.277.1.5.1.1.200
Current incoming allocated bandwidth for QoS Class 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportInAllocbwQoS3 4.1.277.1.5.1.1.201
Current incoming allocated bandwidth for QoS Class 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportInAllocbwQoS4 4.1.277.1.5.1.1.202
Current incoming allocated bandwidth for QoS Class 4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportDynamicQoSbw 4.1.277.1.5.1.1.203
Bitmap defining which QoS Classes should have bandwidth allocated dynamically from lportDataRate instead of reserving a percentage up-front.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER qos-class-1(1), qos-class-2(2), qos-class-3(4), qos-class-4(8)  

lportSVCRetryTimer 4.1.277.1.5.1.1.204
The duration in seconds (1..255) the network is allowed to re-establish a SVC after network failure before clearing the SVC. A value of (0) indicates continuous retries by the network until the user clears the SVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportAtmNetworkType 4.1.277.1.5.1.1.205
Whether this lport is supporting a private or public network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER private(1), public(2)  

lportAtmRouteMetricQoS1 4.1.277.1.5.1.1.206
Routing metric associated with QoS Class 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER administrative-cost(1), end-to-end-delay(2), cell-delay-variation(3)  

lportAtmRouteMetricQoS2 4.1.277.1.5.1.1.207
Routing metric associated with QoS Class 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER administrative-cost(1), end-to-end-delay(2), cell-delay-variation(3)  

lportAtmRouteMetricQoS3 4.1.277.1.5.1.1.208
Routing metric associated with QoS Class 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER administrative-cost(1), end-to-end-delay(2), cell-delay-variation(3)  

lportAtmRouteMetricQoS4 4.1.277.1.5.1.1.209
Routing metric associated with QoS Class 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER administrative-cost(1), end-to-end-delay(2), cell-delay-variation(3)  

lportIlmiPollTimeout 4.1.277.1.5.1.1.210
The duration in seconds (1..255) the ILMI poll is generated by the network-side UME. A value of 0 set to default polling period of 5 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportAtmProtocol 4.1.277.1.5.1.1.211
UNI protocol version for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uni-30(1), uni-31(2), iisp(3)  

lportIlmiAdminStatus 4.1.277.1.5.1.1.212
Administrative state for ILMI function on this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

lportIlmiOperStatus 4.1.277.1.5.1.1.213
Operational status for ILMI function on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), registering(2), up(3)  

lportIlmiPollRetry 4.1.277.1.5.1.1.214
The number of retries of ILMI poll request will be generated when network-side UME detects loss of ILMI connectivity. A value of 0 sets to default value of 4 times
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

lportAtmVpiBits 4.1.277.1.5.1.1.215
Number of bits of VPI supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportAtmVciBits 4.1.277.1.5.1.1.216
Number of bits of VCI supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportAtmOamAlarmEnable 4.1.277.1.5.1.1.217
If disabled then OAM alarms are not generated for circuits that are down on this lport.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

lportInVAvailbw 4.1.277.1.5.1.1.218
Currently available Incoming virtual bandwidth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportbwUNIPolicy 4.1.277.1.5.1.1.219
The network policy towards requiring sufficient bandwidth at the UNI interface prior to allowing a circuit to be established.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable-uni-bw-policing(1), disable-uni-bw-policing(2)  

lportStarvation 4.1.277.1.5.1.1.220
The CBR card detected a starvation condition on this lport for the extended period defined in Bellcore TA-NWT-001248
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), error(2)  

lportRecOverflow 4.1.277.1.5.1.1.221
The CBR card detected a receive overflow condition on this lport for the extended period defined in Bellcore TA-NWT-001248
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), error(2)  

lportLossOfCellSequence 4.1.277.1.5.1.1.222
The CBR card detected a LOS condition on this lport for the extended period defined in Bellcore TA-NWT-001248
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), error(2)  

lportLossOfStructurePointer 4.1.277.1.5.1.1.223
The CBR card detected a loss of structure pointer condition on this lport for the extended period defined in Bellcore TA-NWT-001248
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), error(2)  

lportCbrInsDummyCells 4.1.277.1.5.1.1.224
The number of dummy cells inserted due to cell loss on a constant bit rate (AAL1) interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportRecFifoUnderflowCnt 4.1.277.1.5.1.1.225
The number of receive FIFO underflows since the last reset. If this condition persists, a lportCBRLineDataError trap is issued indicating the lportStarvation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportRecFifoOverflowCnt 4.1.277.1.5.1.1.226
The number of receive FIFO overflows since the last reset. If this condition persists, a lportCBRLineDataError trap is issued indicating the receive FIFO overflow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportCbrLossOfStructurePointerCnt 4.1.277.1.5.1.1.227
The object counts how often the structured CBR card detected a loss of the structure pointer since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportCbrLossOfCellSequenceCnt 4.1.277.1.5.1.1.228
The number of loss of cell sequence since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportShaperId 4.1.277.1.5.1.1.229
The shaper to be used for this ATM trunk interworking with frame relay: 1-port ATM-IWU STM-1/STS-3c card -------------------------------- Values: 1..16
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportIlmiPrefixScreenMode 4.1.277.1.5.1.1.230
The type of screening to apply against dynamic prefixes received from the peer ILMI entity at this DTE port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER node-prefix(1), port-prefix(2), node-prefix-or-port-prefix(3), reject-all(127), accept-all(255)  

lportSmdsPduViolTca 4.1.277.1.5.1.1.231
This object defines the ability to enable and disable SMDS pdu violation traps on this logical port. This functionality applies to the following logical port types: SMDS DXI/SNI DCE SMDS DXI/SNI DTE SMDS SSI DTE SMDS Optimum Trunk Direct Line Trunk The default value of this object is 'disabled'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

lportSmdsPduViolThresh 4.1.277.1.5.1.1.232
This object defines the Smds pdu violation threshold for this logical port. The allowable range of threshold values is 1-255. The default value of this object is '10'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportSmdsPduHdrSip3SaNotFound 4.1.277.1.5.1.1.233
This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Not Found. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrSip3SaDaOnSamePort 4.1.277.1.5.1.1.234
This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Da On Same Port. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrSip3DstGaNotFound 4.1.277.1.5.1.1.235
This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ga Not Found. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrSip3DstIaScrnFail 4.1.277.1.5.1.1.236
This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ia Scrn Fail. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrSip3SaValFail 4.1.277.1.5.1.1.237
This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Val Fail. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrSip3DstIaNotFound 4.1.277.1.5.1.1.238
This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ia Not Found. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrSip3SrcIaScrnFail 4.1.277.1.5.1.1.239
This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Src Ia Scrn Fail. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrSip3DstGaScrnFail 4.1.277.1.5.1.1.240
This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ga Scrn Fail. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrSip3SaTypeInvalid 4.1.277.1.5.1.1.241
This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Type Invalid. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrSip3DaTypeInvalid 4.1.277.1.5.1.1.242
This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Da Type Invalid. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrDxi2LinkIdInvalid 4.1.277.1.5.1.1.243
This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Link Id Invalid. The length of this object is 4 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrDxi2CrInvalid 4.1.277.1.5.1.1.244
This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Cr Invalid. The length of this object is 4 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrDxi2CtrlInvalid 4.1.277.1.5.1.1.245
This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Ctrl Invalid. The length of this object is 4 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrDxi2StationIdInvalid 4.1.277.1.5.1.1.246
This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Station Id Invalid. The length of this object is 4 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportSmdsPduHdrDxi2AeInvalid 4.1.277.1.5.1.1.247
This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Ae Invalid. The length of this object is 4 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportDS0FarendLpbkEnabled 4.1.277.1.5.1.1.248
Set a single DS0 into farend loopback 1-24.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportDS0FarendLpbkDisabled 4.1.277.1.5.1.1.249
Set a single DS0 out farend loopback 1-24.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportTrkProtFailureThreshold 4.1.277.1.5.1.1.250
The time, measured in seconds, that Trunk Protocol waits before transitioning the state of an unresponsive trunk from UP to DOWN. Trunk protocol keepalive requests are issued on the trunk lport once per second. This value defines the failure threshold, that is, the number of consecutive requests that must go unanswered before the Trunk Protocol application will declare the trunk lport DOWN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportPtr 4.1.277.1.5.1.1.251
An octet string indicating the lport pointer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lportISDNPoolUtil 4.1.277.1.5.1.1.252
The percent utilization of the B-channel pool that this b-channel belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportISDNIpAddrAssignFail 4.1.277.1.5.1.1.253
The cause value for why Ip Address assignment has failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lportTrkUtilQoS1 4.1.277.1.5.1.1.254
An estimate of the real QoS1 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportTrkUtilQoS2 4.1.277.1.5.1.1.255
An estimate of the real QoS2 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportTrkUtilQoS3 4.1.277.1.5.1.1.256
An estimate of the real QoS3 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportTrkUtilQoS4 4.1.277.1.5.1.1.257
An estimate of the real QoS4 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lportInCells 4.1.277.1.5.1.1.267
The total number of cells received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lportOutCells 4.1.277.1.5.1.1.268
The total number of cells transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktTable 4.1.277.1.6.1
A table containing information about specific DLCIs, channels and corresponding circuits.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CktEntry

cktEntry 4.1.277.1.6.1.1
The information regarding a single Data Link Connection Identifier.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CktEntry  

cktSrcIfIndex 4.1.277.1.6.1.1.1
The ifIndex value of the corresponding ifEntry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Index  

cktSrcDlci 4.1.277.1.6.1.1.2
The DLCI used as the key for the circuit. For local DLCI significance, this is the local DLCI. For Global DLCI significance, this is the remote DLCI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktPriority 4.1.277.1.6.1.1.3
The priority level (1 through 3) for this circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktCir 4.1.277.1.6.1.1.4
The average number of user data (bits) that the network agrees to transfer over the circuit in one direction, measured over the measurement interval T = cktBc/cktCir.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktBc 4.1.277.1.6.1.1.5
The maximum amount of data (bits) that the network agrees to transfer over the circuit under normal conditions, during the measurement interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktBe 4.1.277.1.6.1.1.6
The maximum amount of uncommitted data (bits) that the network will attempt to transfer over the circuit during the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktDestNodeId 4.1.277.1.6.1.1.7
The destination node ID for this circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktDestIfIndex 4.1.277.1.6.1.1.8
The interface identifier at the destination node for this circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktDestDlci 4.1.277.1.6.1.1.9
The DLCI which is the destination of the key DLCI. For local DLCI significance, this is the remote DLCI since the key DLCI is the local DLCI. For global significance, this is the local DLCI since the key DLCI is the remote DLCI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktTos 4.1.277.1.6.1.1.10
The type of service for the circuit. Only committed is supported in the FCS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER committed(1), shared(2)  

cktOde 4.1.277.1.6.1.1.11
This variable states whether graceful discard is enabled for the ckt.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1)  

cktAdminStatus 4.1.277.1.6.1.1.12
The desired state of the ckt.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER down(1), up(2)  

cktCreationTime 4.1.277.1.6.1.1.13
The value of sysUpTime when the circuit was created (activated).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

cktLastTimeChange 4.1.277.1.6.1.1.14
The sysUpTime value when the circuit was last changed to the current state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

cktVcState 4.1.277.1.6.1.1.15
The current state of the PVC segment in the Cascade network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), retry(2), calling(3), wcbdeact(4), wcbdelete(5), active(6), svcall(7), svclr(8), backedup(9), wcbbkdp(10), wcbreact(11), slowretry(12)  

cktDceState 4.1.277.1.6.1.1.16
The DCE state of the circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

cktDteStatus 4.1.277.1.6.1.1.17
The DTE status of the circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

cktRnr 4.1.277.1.6.1.1.18
The receiver's readiness for accepting data flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER recvnotready(1)  

cktNiDown 4.1.277.1.6.1.1.19
The state of the network interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nidown(1)  

cktDteState 4.1.277.1.6.1.1.20
The DTE state of the circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

cktOperStatus 4.1.277.1.6.1.1.21
The current operational status of the entire PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

cktOutForward 4.1.277.1.6.1.1.22
If the value is 1, it means the outbound flow is on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1)  

cktRerouteCnt 4.1.277.1.6.1.1.23
The reroute count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktVcPtr 4.1.277.1.6.1.1.24
An 8-byte Octect string indicating the vc pointer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cktHopCnt 4.1.277.1.6.1.1.25
The count of hops along the circuit path. (Max is 16)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktPath 4.1.277.1.6.1.1.26
The circuit path consisting a sequence of outbound interface indexes at nodes along the established circuit. The format is interface:interface:interface......
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cktFailReason 4.1.277.1.6.1.1.27
The reason for the PVC establishment failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER admindown(1), novcbuff(2), nobw(3), noroute(4), timeout(5), nopdubuff(6), nodest(7), trkrnr(8), trkdown(9), balancereroute(10), dead(11), defpathreroute(12), nidown(13), otherpvcsegdown(14), otherpvcsegrnr(15), usingaltpathwarning(16), iopdown(17), numsgbuffer(18), noport(19), misconfig(20), svcsetupfail(21), srcbackedup(22), srcunknown(23), dstunknown(24), bkpdlcicollision(25), oldrevinpath(26), smdsmgmttrunk(27), nevercalled(28), bothendptbackup(29), pvcroutemgttrunk(30), nomultipointparent(31), pvcroutefail(32), novpivci(33)  

cktFailNode 4.1.277.1.6.1.1.28
The node which causes the PVC failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktFailPort 4.1.277.1.6.1.1.29
The port on the fail node which causes the PVC failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktMcastGroupId 4.1.277.1.6.1.1.30
Multicast group identifier (1..32). This field is 0 for unicast PVCs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktMcastMemberList 4.1.277.1.6.1.1.31
A list of operations and the affected unicast DLCIs (lportId, cktId)s in a multicast group. The syntax is as follows: [op:dlci,dlci,...,op:dlci,dlci,...] where op can either be delete (0) or add (1)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

cktMcastParentGroups 4.1.277.1.6.1.1.32
An 8-byte Octect string indicating the parent groups this DLCI belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cktInFrames 4.1.277.1.6.1.1.33
The number of inbound frames since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktInDEFrames 4.1.277.1.6.1.1.34
The number of inbound DE-marked frames since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktInODEFrames 4.1.277.1.6.1.1.35
The number of inbound ODE-marked frames since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktInFECNFrames 4.1.277.1.6.1.1.36
The number of inbound frames indicating forward congestion since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktInBECNFrames 4.1.277.1.6.1.1.37
The number of inbound frames indicating backward congestion since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktInDiscards 4.1.277.1.6.1.1.38
Number of inbound frames discarded by rate enforcement.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktInOctets 4.1.277.1.6.1.1.39
The number of inbound octets since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktInDEOctets 4.1.277.1.6.1.1.40
The number of inbound DE-marked octets since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktInODEOctets 4.1.277.1.6.1.1.41
The number of inbound ODE-marked octets since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutFrames 4.1.277.1.6.1.1.42
The number of outbound frames since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutDEFrames 4.1.277.1.6.1.1.43
The number of outbound DE-marked frames since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutODEFrames 4.1.277.1.6.1.1.44
The number of outbound ODE-marked frames since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutFECNFrames 4.1.277.1.6.1.1.45
The number of outbound FECN-marked frames since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutBECNFrames 4.1.277.1.6.1.1.46
The number of outbound BECN-marked frames since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutOctets 4.1.277.1.6.1.1.47
The number of outbound octets since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutDEOctets 4.1.277.1.6.1.1.48
The number of outbound DE-marked octets since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutODEOctets 4.1.277.1.6.1.1.49
The number of outbound ODE-marked octets since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutLostFrames 4.1.277.1.6.1.1.50
The number of outbound frames that have been lost since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutLostDEFrames 4.1.277.1.6.1.1.51
The number of outbound DE-marked frames that have been lost since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutLostODEFrames 4.1.277.1.6.1.1.52
The number of outbound ODE-marked frames that have been lost since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutLostOctets 4.1.277.1.6.1.1.53
The number of outbound octets that have been lost since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutLostDEOctets 4.1.277.1.6.1.1.54
The number of outbound DE-marked octets that have been lost since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutLostODEOctets 4.1.277.1.6.1.1.55
The number of outbound ODE-marked octets that have been lost since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktRtMinDelay 4.1.277.1.6.1.1.56
The minimum round-trip delay (micro-seconds).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRtMaxDelay 4.1.277.1.6.1.1.57
The maximum round-trip delay (micro-seconds).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRtAvgDelay 4.1.277.1.6.1.1.58
The average round-trip delay (micro-seconds).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktDiagTestId 4.1.277.1.6.1.1.59
Identification for the diagnostics tests to be run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktDiagTestRuns 4.1.277.1.6.1.1.60
Number of passes of the diagnostics tests to be run. The default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktHelloCounter 4.1.277.1.6.1.1.61
Number of PVC hello pdu frames received in the VC entry of the called side.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktHelloAckCounter 4.1.277.1.6.1.1.62
Number of PVC hello Ack pdu frames received in the VC entry of the calling side.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktDefinedPath 4.1.277.1.6.1.1.63
User defined path. in the format of Nx,x,x,Nx,.... If x is not prefixed with 'N', x is an interface ID. If x is prefixed with `N`, x is a node ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

cktDefinedPathCount 4.1.277.1.6.1.1.64
User defined path hop count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktDefinedPathEnable 4.1.277.1.6.1.1.65
If set to 1, it means there is an user defined path for this circuit and it is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktDefinedPathAltOption 4.1.277.1.6.1.1.66
If set to 1, it means that if the user defined path fails, use the ospf-determined path.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktUsingDefinedPath 4.1.277.1.6.1.1.67
If set to 1, it indicates the PVC is currently using the defined path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktTryAltPath 4.1.277.1.6.1.1.68
If set to 1, it means the inactive PVC will be activated on the ospf-determined path in the next retry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktNotVirgin 4.1.277.1.6.1.1.69
If set to 1, it means this VC entry has been successfuly activated before.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktInForward 4.1.277.1.6.1.1.70
If the value is 1, it means the inbound flow is OK.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktBtusSeg 4.1.277.1.6.1.1.71
Number of Bus xmit units per data segment
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktInSegmentsDiscards 4.1.277.1.6.1.1.72
Number of segments received that were discarded because of frame reassembly errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktAtmVPI 4.1.277.1.6.1.1.73
VPI value in the ATM cell header: ATM DXI with HSSI IOP VPI (4 lsb bit) range: 0 - 15 ATM UNI DS3/E3 IOP VPI (4 lsb bit) range: 0 - 15 T1 ATM 4 lsb range 0-15 ATM-IWU STM-1/STS-3c VPI (<=12 lsb bit) range: 0-4095
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmVCI 4.1.277.1.6.1.1.74
VCI value in the ATM cell header: ATM DXI with HSSI IOP VCI (6 lsb bit) range: 0 - 63 ATM UNI DS3/E3 IOP VCI (8 lsb bit) range: 0 - 255 T1 ATM 4 lsb VCI (6 lsb bit) range 0 - 255 ATM-IWU STM-1/STS-3c VCI (<=12 lsb bit) range: 0-4095
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktType 4.1.277.1.6.1.1.75
1 if a permanent virtual circuit; 2 if a switched virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pvc(1), svc(2)  

cktSvcCallingParty 4.1.277.1.6.1.1.76
The calling party number if this is a switched virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cktSvcCalledParty 4.1.277.1.6.1.1.77
The called party number if this is a switched virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cktSvcDuration 4.1.277.1.6.1.1.78
The duration since the SVC circuit has been running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

cktSvcCause 4.1.277.1.6.1.1.79
SVC cause number. The index will be 0.0 and should be disregarded. The following cause numbers maybe returned by stdx: 1 - unassigned number, callee is not assigned 2 - no route to specified transit network 3 - no route to destination 6 - channel unacceptable 16 - normal clearing 17 - user busy 18 - no user responding 21 - call rejected by whoever is sending this cause 22 - number changed, called party has changed its number 27 - destination out of order (the interface to called user) 28 - called party number is invalid 29 - facility requested can't be provided by network 30 - included in STATUS message to indicate it is responding to a STATUS ENQUIRY 31 - unspecified, used if no other cause is appropriate 34 - no circuit or channel available to handle the call 38 - network is out of order 41 - tempprary failure, i.e., caller may try again 42 - network congestion 43 - access information (user-to-user) discarded 44 - requested circuit unavailable 58 - bearer capability not available 63 - requested service unavailable 65 - requested bearer capability is not implemented 81 - call reference is unknown 95 - invalid message 96 - mandatory information element is missing 97 - message type is unknown 98 - message not compatible with call state 99 - information element is unknown or not implemented 100 - invalid information element contents 101 - message not compatible with call state
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktXlatFlag 4.1.277.1.6.1.1.80
0 if RFC1490 or no translation; 1 if RFC1483 translation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rfc1483(1)  

cktDestLaddr 4.1.277.1.6.1.1.81
The destination logical address of the circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktSrcLaddr 4.1.277.1.6.1.1.82
The source logical address of the circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktLoop 4.1.277.1.6.1.1.83
Setting this variable controls the loopback status of the given circuit endpoint.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local(1), remote(2), both(3)  

cktRerouteBalance 4.1.277.1.6.1.1.84
Setting this variable controls the use of rerouting to balance link usage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1)  

cktCallingBackup 4.1.277.1.6.1.1.85
Indicates if a caller endpoint is calling a backup PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1)  

cktRCir 4.1.277.1.6.1.1.86
The average number of user data (bits) that the network agrees to transfer over the circuit in the opposite direction, measured over the measurement interval T = cktBc/cktCir.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmQoS 4.1.277.1.6.1.1.87
The Quality of Service of the ATM Circuit. Valid only for ATM type circuits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cbr(1), vbr1(2), vbr2(3), vbr3(4)  

cktAtmInCells 4.1.277.1.6.1.1.88
The Number of ATM cells received on a VC (VPC or VCC).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktAtmOutCells 4.1.277.1.6.1.1.89
The Number of ATM cells transmitted on a VC (VPC or VCC)..
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktAtmInDiscardedClp0Cells 4.1.277.1.6.1.1.90
The Number of ATM CLP0 cells received and discarded on a VC (VPC or VCC)..
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktAtmInDiscardedClp1Cells 4.1.277.1.6.1.1.91
The Number of ATM CLP1 cells received and discarded on a VC (VPC or VCC).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktAtmVcType 4.1.277.1.6.1.1.92
Type of ATM connection (VPC or VCC).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vpc(1), vcc(2)  

cktAtmPCR 4.1.277.1.6.1.1.93
The Peak Cell Rate measured in cells/second at which cells are transmitted for this circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmSCR 4.1.277.1.6.1.1.94
The Sustainable Cell Rate is the average transmission rate in cells per second for this circuit. It must be less than or or equal to the Peak Cell Rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmMBS 4.1.277.1.6.1.1.95
The Maximum Burst size determines the maximum number of cells that can be transmitted at the peak cell rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmInPassedClp0Cells 4.1.277.1.6.1.1.96
The Number of ATM CLP 0 cells received and passed UPC on a VC (VPC or VCC).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktAtmInPassedClp1Cells 4.1.277.1.6.1.1.97
The Number of ATM CLP 1 cells received and passed UPC on a VC (VPC or VCC).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktAtmInTaggedCells 4.1.277.1.6.1.1.98
The Number of ATM cells received and tagged on a VC (VPC or VCC).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktAtmOutClp0Cells 4.1.277.1.6.1.1.99
The Number of ATM CLP 0 cells transmitted on a VC (VPC or VCC)..
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktAtmOutClp1Cells 4.1.277.1.6.1.1.100
The Number of ATM CLP 1 cells transmitted on a VC (VPC or VCC)..
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktAtmRQoS 4.1.277.1.6.1.1.101
The Quality of Service of the ATM connection in the opposite direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cbr(1), vbr1(2), vbr2(3), vbr3(4)  

cktAtmTfdType 4.1.277.1.6.1.1.102
The combination of traffic parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pcr-0-01(1), pcr-0-01-tag(2), pcr-01-scr-0-mbs-0(3), pcr-01-scr-0-mbs-0-tag(4), pcr-01(5), pcr-01-scr-01-mbs-01(6), pcr-01-bestEffort(7)  

cktAtmRTfdType 4.1.277.1.6.1.1.103
The combination of traffic parameters in opposite direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pcr-0-01(1), pcr-0-01-tag(2), pcr-01-scr-0-mbs-0(3), pcr-01-scr-0-mbs-0-tag(4), pcr-01(5), pcr-01-scr-01-mbs-01(6), pcr-01-bestEffort(7)  

cktAtmTfdParam1 4.1.277.1.6.1.1.104
The traffic descriptor parameter 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmTfdParam2 4.1.277.1.6.1.1.105
The traffic descriptor parameter 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmTfdParam3 4.1.277.1.6.1.1.106
The traffic descriptor parameter 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmRTfdParam1 4.1.277.1.6.1.1.107
The traffic descriptor parameter 1 for opposite direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmRTfdParam2 4.1.277.1.6.1.1.108
The traffic descriptor parameter 3 for opposite direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmRTfdParam3 4.1.277.1.6.1.1.109
The traffic descriptor parameter 3 for opposite direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmFrameIWF 4.1.277.1.6.1.1.110
Frame Relay/ATM Interworking Function indicator.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default(1), iwf(2)  

cktAtmUserPlane 4.1.277.1.6.1.1.111
Bitmap defining user plane capabilities.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER point-to-point(1), point-to-multipoint(2)  

cktRBc 4.1.277.1.6.1.1.112
The maximum amount of data (bits) that the network agrees to transfer over the circuit in the opposite direction under normal conditions, during the measurement interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktRBe 4.1.277.1.6.1.1.113
The maximum amount of uncommitted data (bits) that the network will attempt to transfer over the circuit in the opposite direction during the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktOamLoopbackDirection 4.1.277.1.6.1.1.114
Which direction to send the loopback cell. If 'local', send out this circuit entry's port. If 'remote', send out the remote circuit entry's port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

cktOamLoopbackType 4.1.277.1.6.1.1.115
Type of oam loopback to send - either segment or end to end.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER segment(1), end-to-end(2)  

cktOamLoopbackHops 4.1.277.1.6.1.1.116
Number of hops the loopback cell should traverse inside the Cascade network before being echoed back by the far Cascade device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktOamLoopbackCount 4.1.277.1.6.1.1.117
Number of oam loopback cells left to send this session. Setting this from zero to non-zero starts the loopback session.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktOamLoopbackReceived 4.1.277.1.6.1.1.118
Number of oam responses received for this loopback session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOamLoopbackTimeouts 4.1.277.1.6.1.1.119
Number of times a loopback response was not received within the timeout period during this loopback session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOamLoopbackReceivedHigh 4.1.277.1.6.1.1.120
Highest response time (in milliseconds) of an oam loopback response this loopback session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktOamLoopbackReceivedLow 4.1.277.1.6.1.1.121
Lowest response time (in milliseconds) of an oam loopback response this loopback session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktOamLoopbackReceivedAvg 4.1.277.1.6.1.1.122
Average response time (in milliseconds) of an oam loopback response this loopback session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktOamAlarmDisable 4.1.277.1.6.1.1.123
If disabled, then don't generate oam alarms if this circuit is down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cktShaperId 4.1.277.1.6.1.1.124
The shaper to be used for this virtual connection interworking with frame relay: 1-port ATM-IWU STM-1/STS-3c card -------------------------------- Values: 1..16
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktOspfCtd 4.1.277.1.6.1.1.125
The allowed cell delay: 4-port CBR E1/DS1 card ---------------------- The maximum allowed cell delay in msec
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

cktOspfCdv 4.1.277.1.6.1.1.126
The allowed cell delay variation: 4-port CBR E1/DS1 card ---------------------- The maximum allowed cell delay variation in msec
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 100..1000  

cktOutPort 4.1.277.1.6.1.1.127
The outgoing port number for the adjacent VC entry in this switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktOutVc 4.1.277.1.6.1.1.128
The adjacent VC entry corresponding to this circuit accross the bus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRVc 4.1.277.1.6.1.1.129
The adjacent VC entry corresponding to this circuit accross the trunk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktEntryType 4.1.277.1.6.1.1.130
The internal type of circuit entry allocated by the circuit manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fr-user(1), as-trunk(2), on-trunk(3), lmi(4), multicast(5), mgmt(6), smds(7), split-multicast(8), control(9), atm-user(10), atm-leaf(11)  

cktDiagStr 4.1.277.1.6.1.1.131
Internal diagnostic information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cktSvcAalType 4.1.277.1.6.1.1.132
The AAL type for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER aal1(1), unspecified(2), aal3-4(3), user-defined(4), aal5(5)  

cktSvcBBearerClass 4.1.277.1.6.1.1.133
The Broadband bearer capability class for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unspecified(1), class-A(2), class-C(3), class-X(4), class-VP(5)  

cktSvcBBearerClippingSusc 4.1.277.1.6.1.1.134
The Broadband bearer capability clipping susceptibility for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unspecified(1), not-susceptible(2), susceptible(3)  

cktSvcBBearerTmgReq 4.1.277.1.6.1.1.135
The Broadband bearer capability timing requirements for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-indicated(1), end-to-end(2), not-end-to-end(3)  

cktSvcBBearerTfcType 4.1.277.1.6.1.1.136
The Broadband bearer capability traffic type for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-indicated(1), cbr(2), vbr(3)  

cktAtmUPCEnable 4.1.277.1.6.1.1.137
Enable ATM UPC Function.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cktRPriority 4.1.277.1.6.1.1.138
The priority level (0 through 3) for this circuit in the opposite direction. When port service type is defined as 'mono-class', this priority means the forward priority of the circuit. When port service type is defined as 'multi-class', this priority means the discard priority of the circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktRtPriority 4.1.277.1.6.1.1.139
The routing priority level of the circuit which is a 8 bit number where the 3-bit bumping priority is contained in bits 0-2 and the 4-bit bandwidth priority is contained in bits 3-6. For ATM multipoint ckts, bw and bumping priorities should be zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktDeltaBc 4.1.277.1.6.1.1.140
The maximum number of bits that the network agree to transfer over the circuit as committed bits during the measurement interval under the CONDITION that the circuit still has POSITIVE committed bit (Bc) credits before receiving a frame but will have NEGATIVE Bc credits after accepting the frame. The range of this variable is 0 to 65,528 bits. By default, if not configured when creating the entry, it is set to 65,528 bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktDeltaBe 4.1.277.1.6.1.1.141
The maximum number of bits that the network agree to transfer over the circuit as allowed excess bits during the measurement interval under the CONDITION that the circuit still has POSITIVE excess bit (Be) credits before receiving a frame but will have NEGATIVE Be credits after accepting the frame. The range of this variable is 0 to 65,528 bits. By default, if not configured when creating the entry, it is set to 65,528 bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktDeltaRBc 4.1.277.1.6.1.1.142
The maximum number of bits that the network agree to transfer over the circuit as committed bits in the opposite direction during the measurement interval under the CONDITION that the circuit still has POSITIVE committed bit (Bc) credits before receiving a frame but will have NEGATIVE Bc credits after accepting the frame. The range of this variable is 0 to 65,528 bits. By default, if not configured when creating the entry, it is set to 65,528 bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktDeltaRBe 4.1.277.1.6.1.1.143
The maximum number of bits that the network agree to transfer over the circuit as allowed excess bits in the opposite direction during the measurement interval under the CONDITION that the circuit still has POSITIVE excess bit (Be) credits before receiving a frame but will have NEGATIVE Be credits after accepting the frame. The range of this variable is 0 to 65,528 bits. By default, if not configured when creating the entry, it is set to 65,528 bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktRedFrPcnt 4.1.277.1.6.1.1.144
The percentage of RED frame bits that are allowed to enter the network, during the measurement interval, under non-congestion condition. Its value range is 0 - 100 and default value is 100. Its calculation is as follows: cktRedFrPcn = (allowed RED frame bits)/(Bc+Be+allowed RED frame bits)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktRedFrRPcnt 4.1.277.1.6.1.1.145
The percentage of RED frame bits that are allowed to enter the network in the opposite direction, during the measurement interval, under non-congestion condition. Its value range is 0 - 100 and default value is 100. Its calculation is as follows: cktRedFrRPcn = (allowed RED frame bits)/(rBc+rBe+allowed RED frame bits)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktRateEnforceSchm 4.1.277.1.6.1.1.146
Variable used to indicate the rate enforcement scheme employed. 0: Slide window rate enforcement scheme 1: Jump window rate enforcement scheme 2: Simple rate enforcement scheme Default value is 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER jump(1), simple(2)  

cktRateEnforceRSchm 4.1.277.1.6.1.1.147
Variable used to indicate the rate enforcement scheme employed in the opposite direction. 0: Slide window rate enforcement scheme 1: Jump window rate enforcement scheme 2: Simple rate enforcement scheme Default value is 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER jump(1), simple(2)  

cktROde 4.1.277.1.6.1.1.148
This variable states whether graceful discard is enabled for the ckt in the opposite direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1)  

cktPrivateNet 4.1.277.1.6.1.1.149
If non-zero, indicates the private network that the circuit belongs to. If 0, the circuit has access to the entire public portion of the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktPrivateNetOverflow 4.1.277.1.6.1.1.150
Indicates how private network circuits are handled, when the resources of the network have become exhausted. If set to use-public, the resources of the public network can be used during overflow conditions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER use-public(1)  

cktCustomerID 4.1.277.1.6.1.1.151
The Customer that owns this circuit. For Virtual Private Networking Support.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmCDVT 4.1.277.1.6.1.1.152
The Cell Delay Variation Tolerance for the VC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktNdcEnable 4.1.277.1.6.1.1.153
Enable/disable Network Data Collection for a PVC on an IOM. The number of NDC-monitored PVCs is limited as follows: 30 per DS3 interface, 90 per OC3 interface, and 360 per OC12 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cktInterworkingFrToAtmCLP 4.1.277.1.6.1.1.154
CLP mapping for Frame Relay To ATM Service Interworking.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER clp1(1), fr-de(2)  

cktInterworkingFrToAtmDe 4.1.277.1.6.1.1.155
DE bit mapping for ATM To Frame Relay Service Interworking.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER de1(1), atm-clp(2)  

cktNrtsCLP1 4.1.277.1.6.1.1.156
Whether to use the discard threshold as the CLP1 Discard threshold upon reception of a cell by the NRTS processor in the forward direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

cktNrtsDiscardClp0 4.1.277.1.6.1.1.157
The number of the CLP0 cells received and discarded by the NRTS processor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktNrtsDiscardClp1 4.1.277.1.6.1.1.158
The number of the CLP1 cells received and discarded by the NRTS processor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktMPEnableAMF 4.1.277.1.6.1.1.159
Whether the Multilink PPP PVC Attributes Modification Feature is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disableAMF(1), enableAMF(2)  

cktMPEligible 4.1.277.1.6.1.1.160
Whether this circuit is eligible to be a member of a Multilink PPP bundle.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER isMPEligible(1), isNotMPEligible(2)  

cktMPForcedCaller 4.1.277.1.6.1.1.161
Whether this end of the circuit has been forced to be caller to support Multilink PPP PVC Attributes Modification Feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER isMPForcedCaller(1), isNotMPForcedCaller(2)  

cktMPForcedCallee 4.1.277.1.6.1.1.162
Whether this end of the circuit has been forced to be callee to support Multilink PPP PVC Attributes Modification Feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER isMPForcedCallee(1), isNotMPForcedCallee(2)  

cktFrameSize 4.1.277.1.6.1.1.163
The average frame size (measured in number of bytes) of the traffic on the circuit. If not configured, it is set to 280 (bytes) by default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktRFrameSize 4.1.277.1.6.1.1.164
The average frame size (measured in number of bytes) of the traffic on the circuit on the reverse direction. If not configured, it is set to 280 (bytes) by default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktRNrtsCLP1 4.1.277.1.6.1.1.165
Whether to use the discard threshold as the CLP1 Discard threshold upon reception of a cell by the NRTS processor in the reverse direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

cktBBearerAtmTransferCapability 4.1.277.1.6.1.1.166
The broadband bearer ATM transfer capability of this SVC. This object is not pertinent to IISP 3.x, UNI 3.x or Q.2931 signaling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), cbr(2), cbr-with-clr-01(3), vbr-rt(4), vbr-rt-with-clr-01(5), vbr-nrt(6), vbr-nrt-with-clr-01(7), abr(8)  

cktAtmFrameDiscard 4.1.277.1.6.1.1.167
The ATM frame discard state for this circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cktRAtmFrameDiscard 4.1.277.1.6.1.1.168
The reverse ATM frame discard state for this circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cktAbrFRMRTT 4.1.277.1.6.1.1.169
The ABR fixed RM round trip time for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktAbrICR 4.1.277.1.6.1.1.170
The ABR initial cell rate for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRAbrICR 4.1.277.1.6.1.1.171
The reverse ABR initial cell rate for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktAbrRIF 4.1.277.1.6.1.1.172
The ABR rate increase factor for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRAbrRIF 4.1.277.1.6.1.1.173
The reverse ABR rate increase factor for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktAbrRDF 4.1.277.1.6.1.1.174
The ABR rate decrease factor for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRAbrRDF 4.1.277.1.6.1.1.175
The reverse ABR rate decrease factor for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktAbrTBE 4.1.277.1.6.1.1.176
The ABR transient buffer exposure for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRAbrTBE 4.1.277.1.6.1.1.177
The reverse ABR transient buffer exposure for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktAbrNRM 4.1.277.1.6.1.1.178
The ABR NRM for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRAbrNRM 4.1.277.1.6.1.1.179
The reverse ABR NRM for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktAbrTRM 4.1.277.1.6.1.1.180
The ABR TRM for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRAbrTRM 4.1.277.1.6.1.1.181
The reverse ABR TRM for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktAbrCDF 4.1.277.1.6.1.1.182
The ABR CDF for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRAbrCDF 4.1.277.1.6.1.1.183
The reverse ABR CDF for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktAbrADTF 4.1.277.1.6.1.1.184
The ABR ADTF for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRAbrADTF 4.1.277.1.6.1.1.185
The reverse ABR ADTF for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktAccumCTD 4.1.277.1.6.1.1.186
The accumulated cell(frame) transfer delay for this circuit, in microseconds. The distinguished value 0x00FFFFFF means not valid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktAccumCDV 4.1.277.1.6.1.1.187
The accumulated cell delay variation for this circuit, in microseconds. The distinguished value 0x00FFFFFF means not valid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktAccumRCDV 4.1.277.1.6.1.1.188
The accumulated reverse cell delay variation for this circuit, in microseconds. The distinguished value 0x00FFFFFF means not valid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktCLR 4.1.277.1.6.1.1.189
The cell loss ratio requirement, expressed as a negative exponent of 10. The default value 255 represents any cell loss ratio acceptable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktRCLR 4.1.277.1.6.1.1.190
The reverse cell loss ratio requirement, expressed as a negative exponent of 10. The default value 255 represents any cell loss ratio acceptable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmLijId 4.1.277.1.6.1.1.191
The Leaf Initiated Join ID of the PMP SVC rooted at this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktAtmLijType 4.1.277.1.6.1.1.192
The Leaf Initiated Join type of the PMP SVC rooted at this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-lij(1), root-lij(2), network-lij(3)  

cktRtLastDelay 4.1.277.1.6.1.1.193
The last round-trip delay (micro-seconds).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRtAccuMinDelay 4.1.277.1.6.1.1.194
The prev min round-trip delay (micro-seconds).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRtAccuMaxDelay 4.1.277.1.6.1.1.195
The prev max round-trip delay (micro-seconds).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktRtAccuAvgDelay 4.1.277.1.6.1.1.196
The prev avg round-trip delay (micro-seconds).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktQosIntPeriod 4.1.277.1.6.1.1.197
The number of periods for calculating qos params.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmOutOAMClp0Cells 4.1.277.1.6.1.1.198
The number of OAM CLP0 cells transmitted on this circuit. For BIO1 card (on Garnet Platform), this count is not reported separately - see cktEntry 99.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktAtmOutOAMClp1Cells 4.1.277.1.6.1.1.199
The number of OAM CLP1 cells transmitted on this circuit. For BIO1 card (on Garnet Platform), this count is not reported separately - see cktEntry 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktReqCTD 4.1.277.1.6.1.1.200
The requested cell/frame delay variation for this circuit, in microseconds. The range for PVC is 1 - 0x00FFFFFF. The default is 0x00FFFFFF, which means not valid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktInOctetsPeak 4.1.277.1.6.1.1.201
The 5-minute peak value of the number of inbound octets (bytes) for the circuit - from Bulk Statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutOctetsPeak 4.1.277.1.6.1.1.202
The 5-minute peak value of the number of outbound octets (bytes) for the circuit - from Bulk Statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktInDEOctetsPeak 4.1.277.1.6.1.1.203
The 5-minute peak value of the number of inbound DE-marked octets (bytes) for the circuit - from Bulk Statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutDEOctetsPeak 4.1.277.1.6.1.1.204
The 5-minute peak value of the number of outbound DE-marked octets (bytes) for the circuit - from Bulk Statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktInODEOctetsPeak 4.1.277.1.6.1.1.205
The 5-minute peak value of the number of inbound ODE-marked octets (bytes) for the circuit - from Bulk Statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktOutODEOctetsPeak 4.1.277.1.6.1.1.206
The 5-minute peak value of the number of outbound ODE-marked octets (bytes) for the circuit - from Bulk Statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktAdminCostThreshold 4.1.277.1.6.1.1.207
Maximum allowable admin cost for the circuit. If no paths are available with cost less than or equal to this value, the circuit is not established. DEFVAL is 0 which means invalid, valid values range from 1 to 0xFFFFFFFF.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktAtmSvcServiceCategory 4.1.277.1.6.1.1.208
The derived service category in the forward direction for this ATM SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER cbr(1), vbr1(2), vbr2(3), ubr-abr(4), unspecified(5)  

cktAtmSvcRServiceCategory 4.1.277.1.6.1.1.209
The derived service category in the reverse direction for this ATM SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER cbr(1), vbr1(2), vbr2(3), ubr-abr(4), unspecified(5)  

cktInterworkingFrToAtmEFCI 4.1.277.1.6.1.1.210
EFCI mapping for Frame Relay To ATM Service Interworking.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fr-fecn(1), efci0(2)  

cktDiagSARMon 4.1.277.1.6.1.1.211
Used to start or stop flow on the inbound/outbound ATMizer without informing the PPC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER flowOnInbound(1), flowOffInbound(2), flowOnOutbound(3), flowOffOutbound(4), flowOnInboundOutbound(5), flowOffInboundOutbound(6)  

cktAdminCostReal 4.1.277.1.6.1.1.212
Actual value of total administration cost of a circuit. Ranges from 0 to 0xFFFFFFFF.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktAtmInClp0Cells 4.1.277.1.6.1.1.213
The Number of ATM CLP 0 cells received on a VC (VPC or VCC).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktAtmInClp1Cells 4.1.277.1.6.1.1.214
The Number of ATM CLP 1 cells received on a VC (VPC or VCC).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktATMAAL5CRC32Error 4.1.277.1.6.1.1.215
Number of received AAL5 packets with CRC32 errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktATMAAL5CPIError 4.1.277.1.6.1.1.216
Number of received AAL5 packets with CPI errors The only valid value currently defined for the CPI field is all zeros
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktATMAAL5LengthError 4.1.277.1.6.1.1.217
Number of received AAL5 packets which satisfied one of the following error conditions: 1. number of received cells * 48 bytes - length value in trailer > 55 bytes 2. number of received cells * 48 bytes - length value in trailer < 8 bytes
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktATMAAL5ReassemblyTimerError 4.1.277.1.6.1.1.218
Number of expired reassembly timers
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktATMAAL5MaxNrSegError 4.1.277.1.6.1.1.219
Number of received AAL5 packets which exceeds the maximum allowed length
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktIWF1490to1483Error 4.1.277.1.6.1.1.220
Number of Frames received that failed the rfc1490 to rfc 1483 header translation. This error counter indicates that frames being recevied from the frame relay side of the connection have an incorrectly formatted 1490 header and cannot be translated. See cktIWF1490to1483LastBadHeader for the last received 1490 header
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktIWF1490to1483LastBadHeader 4.1.277.1.6.1.1.221
Ascii string of the first 8 bytes of the header from the last frame discarded because the 1490 to 1483 header translation failed. The string displays the hexidecimal values for the data bytes
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cktIWF1483to1490Error 4.1.277.1.6.1.1.222
Number of Frames received that failed the rfc1483 to rfc 1490 header translation. This error counter indicates that frames being recevied from the atm side of the connection have an incorrectly formatted 1483 header and cannot be translated. See cktIWF1483to1490LastBadHeader for the last received 1490 header
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktIWF1483to1490LastBadHeader 4.1.277.1.6.1.1.223
Ascii string of the first 10 bytes of the header from the last frame discarded because the 1483 to 1490 header translation failed. The string displays the hexidecimal values for the data bytes
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cktLeafTable 4.1.277.1.6.2
A table containing information about leaves of multipoint circuits.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CktLeafEntry

cktLeafEntry 4.1.277.1.6.2.1
The objects relevant to a single leaf in a multipoint circuit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CktLeafEntry  

cktLeafSrcIfIndex 4.1.277.1.6.2.1.1
The interface ID at this node's ingress port for the corresponding multipoint circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Index  

cktLeafSrcDlci 4.1.277.1.6.2.1.2
The DLCI, if a frame relay circuit, or concatenated VPI and VCI, if an ATM circuit, at this node's ingress port for the corresponding multipoint circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktLeafEndpointIndex 4.1.277.1.6.2.1.3
An identifier unique to this leaf for the corresponding multipoint circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktLeafCreationTime 4.1.277.1.6.2.1.4
The value of sysUpTime when this leaf was created for the corresponding multipoint circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

cktLeafEgressIfIndex 4.1.277.1.6.2.1.5
The interface ID at this node's egress port for this leaf's segment of the corresponding multipoint circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Index  

cktLeafEgressDlci 4.1.277.1.6.2.1.6
The DLCI, if a frame relay circuit, or concatenated VPI and VCI, if an ATM circuit, at this node's egress port for this leaf's segment of the corresponding multipoint circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktLeafDestNodeId 4.1.277.1.6.2.1.7
The node ID of the node where this leaf terminates.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktLeafDestIfIndex 4.1.277.1.6.2.1.8
The interface ID at the egress port of the destination node for this leaf, if this is a PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Index  

cktLeafDestDlci 4.1.277.1.6.2.1.9
The DLCI, if a frame relay circuit, or concatenated VPI and VCI, if an ATM circuit, at this node's destination port for the corresponding multipoint circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktLeafSvcCallingParty 4.1.277.1.6.2.1.10
The calling party number for this leaf, if this is an SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cktLeafSvcCalledParty 4.1.277.1.6.2.1.11
The called party number for this leaf, if this is an SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cktLeafAdminStatus 4.1.277.1.6.2.1.12
The desired state for the leaf entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER down(1), up(2)  

cktLeafVcState 4.1.277.1.6.2.1.13
The current state of the leaf PVC segment in the Cascade network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), retry(2), calling(3), wcbdeact(4), wcbdelete(5), active(6), svcall(7), svclr(8), backedup(9), wcbbkdp(10), wcbreact(11), slowretry(12)  

cktLeafOperStatus 4.1.277.1.6.2.1.14
The current operational status of the entire leaf PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

cktLeafDceState 4.1.277.1.6.2.1.15
The DCE state of the circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

cktLeafDteStatus 4.1.277.1.6.2.1.16
The DTE status of the circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

cktLeafDteState 4.1.277.1.6.2.1.17
The DTE state of the circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

cktLeafVcPtr 4.1.277.1.6.2.1.18
An 8-byte Octect string indicating the vc pointer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cktLeafHopCnt 4.1.277.1.6.2.1.19
The count of hops along the circuit path. (Max is 16)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktLeafPath 4.1.277.1.6.2.1.20
The circuit path consisting a sequence of outbound interface indexes at nodes along the established circuit. The format is interface:interface:interface......
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cktLeafFailReason 4.1.277.1.6.2.1.21
The reason for the PVC establishment failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER admindown(1), novcbuff(2), nobw(3), noroute(4), timeout(5), nopdubuff(6), nodest(7), trkrnr(8), trkdown(9), balancereroute(10), dead(11), defpathreroute(12), nidown(13), otherpvcsegdown(14), otherpvcsegrnr(15), usingaltpathwarning(16), iopdown(17), numsgbuffer(18), noport(19), misconfig(20), svcsetupfail(21), srcbackedup(22), srcunknown(23), dstunknown(24), bkpdlcicollision(25), oldrevinpath(26), smdsmgmttrunk(27), nevercalled(28), bothendptbackup(29), pvcroutemgttrunk(30), nomultipointparent(31), pvcroutefail(32), novpivci(33)  

cktLeafFailNode 4.1.277.1.6.2.1.22
The node which causes the PVC failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktLeafFailPort 4.1.277.1.6.2.1.23
The port on the fail node which causes the PVC failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktLeafHelloCounter 4.1.277.1.6.2.1.24
Number of PVC hello pdu frames received in the VC entry of the called side.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktLeafHelloAckCounter 4.1.277.1.6.2.1.25
Number of PVC hello Ack pdu frames received in the VC entry of the calling side.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktLeafAtmVPI 4.1.277.1.6.2.1.26
VPI value in the ATM cell header
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktLeafAtmVCI 4.1.277.1.6.2.1.27
VCI value in the ATM cell header
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cktLeafType 4.1.277.1.6.2.1.28
1 if a permanent virtual circuit; 2 if a switched virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pvc(1), svc(2)  

cktLeafAtmInCells 4.1.277.1.6.2.1.29
The Number of ATM cells received on a VCC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktLeafAtmOutCells 4.1.277.1.6.2.1.30
The Number of ATM cells transmitted on a VCC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktLeafAtmInDiscardedClp0Cells 4.1.277.1.6.2.1.31
The Number of ATM CLP0 cells received and discarded on a VCC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktLeafAtmInDiscardedClp1Cells 4.1.277.1.6.2.1.32
The Number of ATM CLP1 cells received and discarded on a VCC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktLeafAtmInPassedClp0Cells 4.1.277.1.6.2.1.33
The Number of ATM CLP 0 cells received and passed UPC on a VCC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktLeafAtmInPassedClp1Cells 4.1.277.1.6.2.1.34
The Number of ATM CLP 1 cells received and passed UPC on a VCC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktLeafAtmInTaggedCells 4.1.277.1.6.2.1.35
The Number of ATM cells received and tagged on a VCC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktLeafAtmOutClp0Cells 4.1.277.1.6.2.1.36
The Number of ATM CLP 0 cells transmitted on a VCC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktLeafAtmOutClp1Cells 4.1.277.1.6.2.1.37
The Number of ATM CLP 1 cells transmitted on a VCC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cktSmdsRtTable 4.1.277.1.6.3
A table containing information about destination, VC, hops and routes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CktSmdsRtEntry

cktSmdsRtEntry 4.1.277.1.6.3.1
The information regarding routes from a node to all its neighbors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CktSmdsRtEntry  

cktSmdsRemoteNode 4.1.277.1.6.3.1.1
The nodeId of the node to which a rought is sought.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktSmdsHopCnt 4.1.277.1.6.3.1.2
The number of hops to reach the desired destination node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktSmdsRoute 4.1.277.1.6.3.1.3
The out-going Interface Id of each of the nodes in the path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cktSmdsLocalPort 4.1.277.1.6.3.1.4
The out-going local portId.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktSmdsRemotePort 4.1.277.1.6.3.1.5
The remote portId of the destination nodeId.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cktSmdsVcState 4.1.277.1.6.3.1.6
The state of the circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dsx1ConfigTable 4.1.277.1.8.1
The DS1 Configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dsx1ConfigEntry

dsx1ConfigEntry 4.1.277.1.8.1.1
An entry in the DS1 Configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Dsx1ConfigEntry  

dsx1SlotId 4.1.277.1.8.1.1.1
The slot number of the corresponding DS1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dsx1PortId 4.1.277.1.8.1.1.2
The port number of the corresponding DS1 on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dsx1TimeElapsed 4.1.277.1.8.1.1.3
The number of seconds that have elapsed since the beginning of the current error-measurement period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..899  

dsx1ValidIntervals 4.1.277.1.8.1.1.4
The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the since interface has been online.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..96  

dsx1LineType 4.1.277.1.8.1.1.5
This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: dsx1ESF Extended SuperFrame DS1 dsx1D4 AT&T D4 format DS1 dsx1E1 CCITT Recommendation G.704 (Table 4a) dsx1E1-CRC CCITT Recommendation G.704 (Table 4b) dsxE1-MF G.704 (Table 4a) with TS16 multiframing enabled dsx1E1-CRC-MF G.704 (Table 4b) with TS16 multiframing enabled
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), dsx1ESF(2), dsx1D4(3), dsx1E1(4), dsx1E1-CRC(5), dsx1E1-MF(6), dsx1E1-CRC-MF(7)  

dsx1LineCoding 4.1.277.1.8.1.1.6
This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. dsx1JBZS refers the Jammed Bit Zero Suppres- sion, in which the AT&T specification of at least one pulse every 8 bit periods is literal- ly implemented by forcing a pulse in bit 8 of each channel. Thus, only seven bits per chan- nel, or 1.344 Mbps, is available for data. dsx1B8ZS refers to the use of a specified pat- tern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. ANSI Clear Channels may use dsx1ZBTSI, or Zero Byte Time Slot Interchange. E1 links, with or without CRC, use dsx1HDB3 or dsx1AMI. dsx1AMI refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density re- quirements, such as inverting HDLC data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dsx1JBZS(1), dsx1B8ZS(2), dsx1HDB3(3), dsx1ZBTSI(4), dsx1AMI(5), other(6)  

dsx1SendCode 4.1.277.1.8.1.1.7
This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: dsx1SendNoCode sending looped or normal data dsx1SendLineCode sending a request for a line loopback dsx1SendPayloadCode sending a request for a payload loopback dsx1SendResetCode sending a loopback termination request dsx1SendQRS sending a Quasi-Random Signal (QRS) test pattern dsx1Send511Pattern sending a 511 bit fixed test pattern dsx1Send3in24Pattern sending a fixed test pattern of 3 bits set in 24 dsx1SendOtherTestPattern sending a test pattern other than those described by this object
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dsx1SendNoCode(1), dsx1SendLineCode(2), dsx1SendPayloadCode(3), dsx1SendResetCode(4), dsx1SendQRS(5), dsx1Send511Pattern(6), dsx1Send3in24Pattern(7), dsx1SendOtherTestPattern(8)  

dsx1CircuitIdentifier 4.1.277.1.8.1.1.8
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

dsx1LoopbackConfig 4.1.277.1.8.1.1.9
This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a requested loopback state that the interface does not support. The values mean: dsx1NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as it's value. dsx1PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for re- transmission after it has passed through the device's framing function. dsx1LineLoop The received signal at this interface does not go through the device (minimum pene- tration) but is looped back out. dsx1OtherLoop Loopbacks that are not defined here.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dsx1NoLoop(1), dsx1PayloadLoop(2), dsx1LineLoop(3), dsx1OtherLoop(4)  

dsx1LineStatus 4.1.277.1.8.1.1.10
This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The dsx1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. dsx1NoAlarm should be set if and only if no other flag is set. If the dsx1LoopbackState bit is set, the loopback in ef- fect can be determined from the dsx1LoopbackConfig object. The various bit positions are: 1 dsx1NoAlarm No Alarm Present 2 dsx1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm) 4 dsx1XmtFarEndLOF Near end sending LOF Indication 8 dsx1RcvAIS Far end sending AIS 16 dsx1XmtAIS Near end sending AIS 32 dsx1LossOfFrame Near end LOF (a.k.a., Red Alarm) 64 dsx1LossOfSignal Near end Loss Of Signal 128 dsx1LoopbackState Near end is looped 256 dsx1T16AIS E1 TS16 AIS 512 dsx1RcvFarEndLOMF Far End Sending TS16 LOMF 1024 dsx1XmtFarEndLOMF Near End Sending TS16 LOMF 2048 dsx1RcvTestCode Near End detects a test code 4096 dsx1OtherFailure any line status not defined here
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8191  

dsx1SignalMode 4.1.277.1.8.1.1.11
'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed Bit Sig- naling is in use. 'bitOriented' indicates that E1 Channel Asso- ciated Signaling is in use. 'messageOriented' indicates that Common Chan- nel Signaling is in use either on channel 16 of an E1 link or channel 24 of a T1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), robbedBit(2), bitOriented(3), messageOriented(4)  

dsx1TransmitClockSource 4.1.277.1.8.1.1.12
The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'throughTiming' indicates that recovered re- ceive clock from another interface is used as the transmit clock.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loopTiming(1), localTiming(2), throughTiming(3)  

dsx1Fdl 4.1.277.1.8.1.1.13
This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following is used. 'dsx1Ansi-T1-403' refers to the FDL exchange recommended by ANSI. 'dsx1Att-54016' refers to ESF FDL exchanges. 'dsx1Fdl-none' indicates that the device does not use the FDL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), dsx1Ansi-T1-403(2), dsx1Att-54016(4), dsx1Fdl-none(8)  

dsx1FdlVersion 4.1.277.1.8.1.1.14
The version of the Dallas FDL firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dsx1CurrentTable 4.1.277.1.8.2
The DS1 Current table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dsx1CurrentEntry

dsx1CurrentEntry 4.1.277.1.8.2.1
An entry in the DS1 Current table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Dsx1CurrentEntry  

dsx1CurrentSlotId 4.1.277.1.8.2.1.1
The slot number of the corresponding DS1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dsx1CurrentPortId 4.1.277.1.8.2.1.2
The port number of the corresponding DS1 on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dsx1CurrentESs 4.1.277.1.8.2.1.3
The number of Errored Seconds, encountered by a DS1 interface in the current 15 minute inter- val.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1CurrentSESs 4.1.277.1.8.2.1.4
The number of Severely Errored Seconds encoun- tered by a DS1 interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1CurrentSEFSs 4.1.277.1.8.2.1.5
The number of Severely Errored Framing Seconds encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1CurrentUASs 4.1.277.1.8.2.1.6
The number of Unavailable Seconds encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1CurrentCSSs 4.1.277.1.8.2.1.7
The number of Controlled Slip Seconds encoun- tered by a DS1 interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1CurrentBESs 4.1.277.1.8.2.1.8
The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1IntervalTable 4.1.277.1.8.3
The DS1 Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dsx1IntervalEntry

dsx1IntervalEntry 4.1.277.1.8.3.1
An entry in the DS1 Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Dsx1IntervalEntry  

dsx1IntervalSlotId 4.1.277.1.8.3.1.1
The slot number of the corresponding DS1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dsx1IntervalPortId 4.1.277.1.8.3.1.2
The port number of the corresponding DS1 on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dsx1IntervalNumber 4.1.277.1.8.3.1.3
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

dsx1IntervalESs 4.1.277.1.8.3.1.4
The number of Errored Seconds encountered by a DS1 interface in one of the previous 96, indi- vidual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1IntervalSESs 4.1.277.1.8.3.1.5
The number of Severely Errored Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1IntervalSEFSs 4.1.277.1.8.3.1.6
The number of Severely Errored Framing Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1IntervalUASs 4.1.277.1.8.3.1.7
The number of Unavailable Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1IntervalCSSs 4.1.277.1.8.3.1.8
The number of Controlled Slip Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1IntervalBESs 4.1.277.1.8.3.1.9
The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1TotalTable 4.1.277.1.8.4
The DS1 Total table. 24 hour interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dsx1TotalEntry

dsx1TotalEntry 4.1.277.1.8.4.1
An entry in the DS1 Total table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Dsx1TotalEntry  

dsx1TotalSlotId 4.1.277.1.8.4.1.1
The slot number of the corresponding DS1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dsx1TotalPortId 4.1.277.1.8.4.1.2
The port number of the corresponding DS1 on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dsx1TotalESs 4.1.277.1.8.4.1.3
The number of Errored Seconds encountered by a DS1 interface in the previous 24 hour interval
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1TotalSESs 4.1.277.1.8.4.1.4
The number of Severely Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1TotalSEFSs 4.1.277.1.8.4.1.5
The number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1TotalUASs 4.1.277.1.8.4.1.6
The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour in- terval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1TotalCSSs 4.1.277.1.8.4.1.7
The number of Controlled Slip Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dsx1TotalBESs 4.1.277.1.8.4.1.8
The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

smdsaddrTable 4.1.277.2.1.1
A list of smds adress entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SmdsaddrEntry

smdsaddrEntry 4.1.277.2.1.1.1
An smds address and its associated information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SmdsaddrEntry  

smdsaddrAddr 4.1.277.2.1.1.1.1
SMDS address. The 4 most significant bits are the address type : 1100 for an individual address, 1110 for a group address. The following 4 bits are 0001. The following 5 bytes are the 10 digits number in BCD format. The following 16 bits are padded with 1's
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

smdsaddrType 4.1.277.2.1.1.1.2
SMDS address internal type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local-individual-address(1), local-group-address(2), non-local-individual-address(3), non-local-group-address(4)  

smdsaddrId 4.1.277.2.1.1.1.3
smds address internal ID. Range from 1 to 192 for local individual addresses. Range from 193 to 704 for Alien individual addresses. Range from 1 to 64 for local group addresses. Range from 65 to 576 for alien group addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

smdsaddrIf 4.1.277.2.1.1.1.4
The interface to which this address is assigned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

smdsaddrParentGrpMap 4.1.277.2.1.1.1.5
The parent group bit map. The bit position of each bit in this bit map represent a parent group address ID. The most significant bit is corresponding to group address ID 1. This MIB object applies to a local individual address only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

smdsaddrParentScrnMap 4.1.277.2.1.1.1.6
This MIB object not applicable to switch software versions 03.99.00 and above. The parent screen bit map. The bit position of each bit in this bit map represent a parent screen ID. The most significant bit is corresponding to screen ID 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

smdsaddrMemberAddrMap 4.1.277.2.1.1.1.7
The member individual address bit map. For set request, the first byte is the operation : 1 for deleting, 2 for adding. The following bytes are the bit map. The bit position of each bit in this bit map represent a member local individual address ID. The most significant bit is corresponding to local individual address ID 1. For get response, The whole string is the bit map.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

smdsaddrAdminStatus 4.1.277.2.1.1.1.8
administration status
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER down(1), up(2)  

smdsaddrSlot 4.1.277.2.1.1.1.9
The Slot in which this address is assigned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

smdsaddrSsiIfNum 4.1.277.2.1.1.1.10
The SSI to which this address is associated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnAddrTable 4.1.277.4.1
A list of E.164 address entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnAddrEntry

isdnAddrEntry 4.1.277.4.1.1
Information about a single local E.164 address in the table. Setting this varible to 0 removes the entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnAddrEntry  

isdnAddrIf 4.1.277.4.1.1.1
The interface id of the logical port in question
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnAddr 4.1.277.4.1.1.2
ISDN address. The actual E164 number. For example, ISDN address 15086922600 is stored as string 15086922600. Setting this value to a null string removes this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

isdnChanType 4.1.277.4.1.1.3
type of logical port 0 => isdn b-channel, 1 => sw56
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnCallerIDTable 4.1.277.4.2
A list of valid caller ids
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnCallerIDEntry

isdnCallerIDEntry 4.1.277.4.2.1
Information about a single valid caller id.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnCallerIDEntry  

isdnCallerIDIf 4.1.277.4.2.1.1
The interface id of the logical port in question
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnCallerIDAddr 4.1.277.4.2.1.2
ISDN address. The actual E164 number. For example, ISDN address 15086922600 is stored as string 15086922600.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

isdnCallerAdminStatus 4.1.277.4.2.1.3
administration status
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER add(1)  

namebindingTable 4.1.277.3.1
A table of name bindings to a set of logical ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NamebindingEntry

namebindingEntry 4.1.277.3.1.1
The name binding entry contains objects relative to a name binding.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NamebindingEntry  

nameType 4.1.277.3.1.1.1
The name type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uninniladdr(1), e164(2), nsap(3), sni(4)  

nameName 4.1.277.3.1.1.2
A name of the type indicated by nameType.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

namePrimary 4.1.277.3.1.1.3
The current binding type for this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER primary(1), backup(2)  

nameIfIndex 4.1.277.3.1.1.4
The interface number of the logical port for this binding.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nameNodeId 4.1.277.3.1.1.5
The identifier number of the node for this binding.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nameStatus 4.1.277.3.1.1.6
The status of the binding.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), invalid(2)  

svcNodePrefixTable 4.1.277.5.1.1
A table of prefixes associated with this node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcNodePrefixEntry

svcNodePrefixEntry 4.1.277.5.1.1.1
The node prefix entry contains objects relevant to SVC prefixes associated with the node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SvcNodePrefixEntry  

svcNodePrefixPrefix 4.1.277.5.1.1.1.1
A prefix associated with this node. E.164 prefixes are coded as 1-15 ASCII octets with no leading padding required. ATM endsystem prefixes are coded as 1-20 binary octets. Unused bits in the last octet must be set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..20)  

svcNodePrefixNumBits 4.1.277.5.1.1.1.2
The number of valid bits associated with this entry's prefix object. By default, this value will be 8 times the prefix object's octet string length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..160  

svcNodePrefixNmbPlan 4.1.277.5.1.1.1.3
The numbering plan corresponding to this entry's prefix object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e164(1), atm-endsystem(2), unknown(4)  

svcNodePrefixAdminStatus 4.1.277.5.1.1.1.4
The status of this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER configured(1), invalid(2)  

svcPrefixTable 4.1.277.5.1.2
A table of SVC address prefixes associated with ports on this node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcPrefixEntry

svcPrefixEntry 4.1.277.5.1.2.1
The prefix entry contains objects relevant to SVC prefixes associated with this port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SvcPrefixEntry  

svcPrefixIfIndex 4.1.277.5.1.2.1.1
The interface value of the corresponding MIB-II ifEntry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Index  

svcPrefixPrefix 4.1.277.5.1.2.1.2
A prefix associated with this port. E.164 prefixes are coded as 1-15 ASCII octets with no leading padding required. ATM endsystem prefixes are coded as 1-20 binary octets. Unused bits in the last octet must be set to 0. For ATM DCE ports, only, atm-endsystem prefixes with length 104 bits (13 octets) and all E.164 prefixes are eligible for ILMI address registration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..20)  

svcPrefixNumBits 4.1.277.5.1.2.1.3
The number of valid bits associated with this entry's prefix object. By default, this value will be 8 times the prefix object's octet string length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..160  

svcPrefixNmbPlan 4.1.277.5.1.2.1.4
The numbering plan corresponding to this entry's prefix object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e164(1), atm-endsystem(2), unknown(4)  

svcPrefixAdminCost 4.1.277.5.1.2.1.5
This object is only relevant for ports connecting this network to another network and is used to represent the administrative cost of reaching destinations containing this entry's prefix value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

svcPrefixLocalGatewayAddress 4.1.277.5.1.2.1.6
This object is only relevant for ports connecting this network to another network and is used to replace the calling party number when egress address translation is configured to the appropriate mode. E.164 addresses are coded as 1-15 ASCII octets Atm-endsystem addresses are coded as 20 octet binary addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

svcPrefixLocalGatewayNmbPlan 4.1.277.5.1.2.1.7
The numbering plan corresponding to this entry's local gateway address object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e164(1), atm-endsystem(2), unknown(4)  

svcPrefixRemoteGatewayAddress 4.1.277.5.1.2.1.8
This object is only relevant for ports connecting this network to another network and is used to replace the calling party number when egress address translation is configured to the appropriate mode. E.164 addresses are coded as 1-15 ASCII octets Atm-endsystem addresses are coded as 20 octet binary addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..20)  

svcPrefixRemoteGatewayNmbPlan 4.1.277.5.1.2.1.9
The numbering plan corresponding to this entry's remote gateway address object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e164(1), atm-endsystem(2), unknown(4)  

svcPrefixAdminStatus 4.1.277.5.1.2.1.10
The status of this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER configured(1), invalid(2), dynamic(3)  

svcAddrTable 4.1.277.5.1.3
A table of SVC addresses associated with with ports on this node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcAddrEntry

svcAddrEntry 4.1.277.5.1.3.1
The address entry contains objects relevant to SVC addresses associated with this port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SvcAddrEntry  

svcAddrIfIndex 4.1.277.5.1.3.1.1
The interface value of the corresponding MIB-II ifEntry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Index  

svcAddrAddress 4.1.277.5.1.3.1.2
An address associated with this port. E.164 addresses are coded as 1-15 ASCII octets. ATM-Endsystem addresses are coded as 20 binary octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..20)  

svcAddrNmbPlan 4.1.277.5.1.3.1.3
The numbering plan corresponding to this entry's address object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e164(1), atm-endsystem(2), unknown(4)  

svcAddrAdminStatus 4.1.277.5.1.3.1.4
The status of this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER configured(1), invalid(2), dynamic(3)  

svcAtmUserPartTable 4.1.277.5.1.4
A table of partial SVC addresses associated with ports on this node, relevant only to ATM DTE ports for use in ILMI address registration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcAtmUserPartEntry

svcAtmUserPartEntry 4.1.277.5.1.4.1
The user part entry contains objects relevant to partial SVC addresses associated with ATM DTE ports on this node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SvcAtmUserPartEntry  

svcAtmUserPartIfIndex 4.1.277.5.1.4.1.1
The interface value of the corresponding MIB-II ifEntry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Index  

svcAtmUserPartUserPart 4.1.277.5.1.4.1.2
A partial ATM endsystem address associated with this ATM DTE port. It will be combined with ATM endsystem prefixes received from the peer DCE to form a full ATM endsystem address. This object is coded as 7 binary octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(7)  

svcAtmUserPartAdminStatus 4.1.277.5.1.4.1.3
The status of this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER configured(1), invalid(2)  

svcConfigTable 4.1.277.5.2.1
A table of SVC configuration paramaters associated with logical ports. The number of entries is given by the value of ifNumber in MIB-II.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcConfigEntry

svcConfigEntry 4.1.277.5.2.1.1
The SVC configuration entry contains objects relevant to SVC operation on a logical port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SvcConfigEntry  

svcConfigIfIndex 4.1.277.5.2.1.1.1
The ifIndex value of the corresponding ifEntry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Index  

svcConfigInitiateIdentStatsUpload 4.1.277.5.2.1.1.2
Setting this object initiates a TFTP upload of SVC identification statistics to the specified IP address. These statistics may be used to identify SVC's of interest on this port and to determine the keys for those SVC's so that further information may be obtained by accessing the circuit table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

svcConfigCgPtyInsertionMode 4.1.277.5.2.1.1.3
This object determines whether a statically configured address shall be inserted in the calling party address IE for calls entering the network at this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), insert(2), replace(3)  

svcConfigCgPtyInsertionAddress 4.1.277.5.2.1.1.4
The calling party address to use in conjunction with the calling party insertion function. E.164 addresses are coded as 15 ASCII octets, utilizing leading ASCII '0' characters, as necessary. Atm-endsystem addresses are coded as 20 octet binary addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(15..20)  

svcConfigCgPtyInsertionNmbPlan 4.1.277.5.2.1.1.5
The numbering plan corresponding to this entry's calling party insertion address object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e164(1), atm-endsystem(2), unknown(4)  

svcConfigCgPtyScreenMode 4.1.277.5.2.1.1.6
The type of screening to perform on the calling party number for calls entering the network at this port. Screening will be conducted by performing a bit-wise (for prefixes) or byte-wise (for addresses) comparison of the calling party number with the appropriate prefix or address database(s), as configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER node-prefix(1), port-prefix(2), node-prefix-or-port-prefix(3), address(4), node-prefix-or-address(5), port-prefix-or-address(6), node-prefix-or-port-prefix-or-address(7), disabled(255)  

svcConfigEgressAddrXlateMode 4.1.277.5.2.1.1.7
This object determines the type of address translation, if any to occur for calls exiting the network at this port. The tunnelling mode will screen the called address against the prefixes configured for this port. If no match is found, no action is taken. If a remote gateway address is configured for the matching prefix entry, the called party address will be tunnelled as a called subaddress and the configured remote gateway address will be inserted as the called party address. If a local gateway address is configured for the matching prefix entry, the calling party address, if present, will be tunnelled as a calling subaddress and the configured local gateway address, if present, will be inserted as the calling party. The replacement mode will operate as does the tunnelling mode, except the original called and calling party addresses will be discarded. The two translation modes are used for address interworking between networks using E.164 ATM Endsystem addresses and native ISDN E.164 addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), tunnel-when-called-party-matches-prefix(2), replace-when-called-party-matches-prefix(3), translate-e164-native-to-nsap(4), translate-e164-nsap-to-native(5)  

svcConfigIngressAddrXlateMode 4.1.277.5.2.1.1.8
This object determines the type of address translation, if any to occur for calls entering the network at this port. The tunnelling mode reverses the actions of egress tunnelling. If a called subaddress is present, it will replace the called party address, which will be discarded. If a calling subaddress is present, it will replace the calling party address, which will be discarded. The two translation modes are used for address interworking between networks using E.164 ATM Endsystem addresses and native ISDN E.164 addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), tunnel(2), translate-e164-native-to-nsap(4), translate-e164-nsap-to-native(5)  

svcConfigCgPtyPresentationMode 4.1.277.5.2.1.1.9
This object controls the circumstances under which the calling party number shall be presented at the egress port of the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER user(1), never(2), always(3)  

svcAtmConfigTable 4.1.277.5.2.2
A table of ATM signalling paramaters associated with ATM logical ports. The maximum number of entries is given by the value of ifNumber in MIB-II.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcAtmConfigEntry

svcAtmConfigEntry 4.1.277.5.2.2.1
The SVC ATM configuration entry contains objects relevant to the configuration and monitoring of ATM signalling on an ATM logical port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SvcAtmConfigEntry  

svcAtmConfigIfIndex 4.1.277.5.2.2.1.1
The ifIndex value of the corresponding ifEntry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Index  

svcAtmConfigAdminStatus 4.1.277.5.2.2.1.2
The configured state of the ATM signalling function for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

svcAtmConfigOperStatus 4.1.277.5.2.2.1.3
The operational status of the signalling function on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), connecting(2), up(3)  

svcAtmConfigQ93bMaxRestart 4.1.277.5.2.2.1.4
The maximum number of unacknowledged restarts to send before declaring a signalling failure.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQ93bMaxStatEnq 4.1.277.5.2.2.1.5
The maximum number of unacknowledged status enquiries to send before issuing a restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQ93bT303 4.1.277.5.2.2.1.6
Protocol Timer T303, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQ93bT308 4.1.277.5.2.2.1.7
Protocol Timer T308, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQ93bT309 4.1.277.5.2.2.1.8
Protocol Timer T309, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQ93bT310 4.1.277.5.2.2.1.9
Protocol Timer T310, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQ93bT313 4.1.277.5.2.2.1.10
Protocol Timer T313, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQ93bT316 4.1.277.5.2.2.1.11
Protocol Timer T316, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQ93bT322 4.1.277.5.2.2.1.12
Protocol Timer T322, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQ93bT398 4.1.277.5.2.2.1.13
Protocol Timer T398, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQ93bT399 4.1.277.5.2.2.1.14
Protocol Timer T399, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQ93bTotalConns 4.1.277.5.2.2.1.15
The total number of SVC's established on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bActiveConns 4.1.277.5.2.2.1.16
The number of SVC's present on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bLastCauseTx 4.1.277.5.2.2.1.17
The last transmitted cause code for this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unalloc-nmb(1), no-route-transnet(2), no-route-dest(3), vcc-unacceptable-30(10), normal-call-clr-31(16), user-busy(17), no-user-response(18), call-reject(21), nmb-changed(22), call-reject-clir(23), dest-out-of-order(27), invalid-nmb-format(28), response-stat-enq(30), normal-unspecified(31), req-vcc-unavailable(35), vcc-fail-31(36), rate-unavail-31(37), network-out-of-order(38), temp-fail(41), access-info-discard(43), no-vcc-available(45), resources-unavailable(47), qos-unavailable(49), rate-unavailable-30(51), b-cap-not-authorized(57), b-cap-unavailable(58), service-unavailable(63), b-cap-not-implemented(65), combination-unsupported(73), aal-params-unsupp-31(78), invalid-call-reference(81), no-channel(82), dest-incompatible(88), invalid-endpoint-ref(89), invalid-transit-net(91), too-many-add-pty-req(92), aal-params-unsupp-30(93), info-element-missing(96), msg-type-not-imp(97), info-element-not-imp(99), invalid-info-element(100), message-not-compatible(101), timer-recovery(102), invalid-message-len(104), protocol-error(111), optional-element-error(127)  

svcAtmConfigQ93bLastCauseRx 4.1.277.5.2.2.1.18
The last received cause code for this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unalloc-nmb(1), no-route-transnet(2), no-route-dest(3), vcc-unacceptable-30(10), normal-call-clr-31(16), user-busy(17), no-user-response(18), call-reject(21), nmb-changed(22), call-reject-clir(23), dest-out-of-order(27), invalid-nmb-format(28), response-stat-enq(30), normal-unspecified(31), req-vcc-unavailable(35), vcc-fail-31(36), rate-unavail-31(37), network-out-of-order(38), temp-fail(41), access-info-discard(43), no-vcc-available(45), resources-unavailable(47), qos-unavailable(49), rate-unavailable-30(51), b-cap-not-authorized(57), b-cap-unavailable(58), service-unavailable(63), b-cap-not-implemented(65), combination-unsupported(73), aal-params-unsupp-31(78), invalid-call-reference(81), no-channel(82), dest-incompatible(88), invalid-endpoint-ref(89), invalid-transit-net(91), too-many-add-pty-req(92), aal-params-unsupp-30(93), info-element-missing(96), msg-type-not-imp(97), info-element-not-imp(99), invalid-info-element(100), message-not-compatible(101), timer-recovery(102), invalid-message-len(104), protocol-error(111), optional-element-error(127)  

svcAtmConfigQ93bNumSetupPduTx 4.1.277.5.2.2.1.19
The number of setup PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumSetupPduRx 4.1.277.5.2.2.1.20
The number of setup PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumCallProcPduTx 4.1.277.5.2.2.1.21
The number of call proceeding PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumCallProcPduRx 4.1.277.5.2.2.1.22
The number of call proceeding PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumConnectPduTx 4.1.277.5.2.2.1.23
The number of connect PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumConnectPduRx 4.1.277.5.2.2.1.24
The number of connect PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumConnectAckPduTx 4.1.277.5.2.2.1.25
The number of connect ack PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumConnectAckPduRx 4.1.277.5.2.2.1.26
The number of connect ack PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumReleasePduTx 4.1.277.5.2.2.1.27
The number of release PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumReleasePduRx 4.1.277.5.2.2.1.28
The number of release PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumReleaseCmpltPduTx 4.1.277.5.2.2.1.29
The number of release complete PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumReleaseCmpltPduRx 4.1.277.5.2.2.1.30
The number of release complete PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumAddPtyPduTx 4.1.277.5.2.2.1.31
The number of add party PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumAddPtyPduRx 4.1.277.5.2.2.1.32
The number of add party PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumAddPtyAckPduTx 4.1.277.5.2.2.1.33
The number of add party acknowledge PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumAddPtyAckPduRx 4.1.277.5.2.2.1.34
The number of add party acknowledge PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumAddPtyRejPduTx 4.1.277.5.2.2.1.35
The number of add party reject PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumAddPtyRejPduRx 4.1.277.5.2.2.1.36
The number of add party reject PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumDropPtyPduTx 4.1.277.5.2.2.1.37
The number of drop party PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumDropPtyPduRx 4.1.277.5.2.2.1.38
The number of drop party PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumDropPtyAckPduTx 4.1.277.5.2.2.1.39
The number of drop party acknowledge PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumDropPtyAckPduRx 4.1.277.5.2.2.1.40
The number of drop party acknowledge PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumStatusEnqPduTx 4.1.277.5.2.2.1.41
The number of status enquiry PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumStatusEnqPduRx 4.1.277.5.2.2.1.42
The number of status enquiry PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumStatusPduTx 4.1.277.5.2.2.1.43
The number of status PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumStatusPduRx 4.1.277.5.2.2.1.44
The number of status PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumRestartPduTx 4.1.277.5.2.2.1.45
The number of restart PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumRestartPduRx 4.1.277.5.2.2.1.46
The number of restart PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumRestartAckPduTx 4.1.277.5.2.2.1.47
The number of restart acknowledge PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQ93bNumRestartAckPduRx 4.1.277.5.2.2.1.48
The number of restart acknowledge PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalMaxCC 4.1.277.5.2.2.1.49
The maximum number of unacknowledged transmitted control PDU's before declaring a loss of connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQSaalMaxPD 4.1.277.5.2.2.1.50
The maximum number of PDU's transmitted before a POLL PDU is transmitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQSaalMaxStat 4.1.277.5.2.2.1.51
The maximum number of list elements in a STAT PDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQSaalTPoll 4.1.277.5.2.2.1.52
The protocol timer corresponding to the polling function, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQSaalTKeepalive 4.1.277.5.2.2.1.53
The protocol timer corresponding to the keepalive function, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQSaalTNoResponse 4.1.277.5.2.2.1.54
The protocol timer corresponding to the response timeout function, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQSaalTCC 4.1.277.5.2.2.1.55
The protocol timer corresponding to the transmission of control PDU's, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQSaalTIdle 4.1.277.5.2.2.1.56
The protocol timer corresponding to the idle function for UNI 3.1, only, specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcAtmConfigQSaalNumDiscardTx 4.1.277.5.2.2.1.57
The number of QSaal transmit discards on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumDiscardRx 4.1.277.5.2.2.1.58
The number of QSaal receive discards on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumErrorTx 4.1.277.5.2.2.1.59
The number of QSaal transmit errors on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumErrorRx 4.1.277.5.2.2.1.60
The number of QSaal receive errors on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumBgnPduTx 4.1.277.5.2.2.1.61
The number of begin PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumBgnPduRx 4.1.277.5.2.2.1.62
The number of begin PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumBgakPduTx 4.1.277.5.2.2.1.63
The number of begin acknowledge PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumBgakPduRx 4.1.277.5.2.2.1.64
The number of begin acknowledge PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumBgrejPduTx 4.1.277.5.2.2.1.65
The number of begin reject PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumBgrejPduRx 4.1.277.5.2.2.1.66
The number of begin reject PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumEndPduTx 4.1.277.5.2.2.1.67
The number of end PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumEndPduRx 4.1.277.5.2.2.1.68
The number of end PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumEndakPduTx 4.1.277.5.2.2.1.69
The number of end acknowledge PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumEndakPduRx 4.1.277.5.2.2.1.70
The number of end acknowldge PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumRsPduTx 4.1.277.5.2.2.1.71
The number of resynchronization PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumRsPduRx 4.1.277.5.2.2.1.72
The number of resynchronization PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumRsakPduTx 4.1.277.5.2.2.1.73
The number of resynchronization acknowledge PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumRsakPduRx 4.1.277.5.2.2.1.74
The number of resynchronization acknowldge PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumErPduTx 4.1.277.5.2.2.1.75
The number of error recovery PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumErPduRx 4.1.277.5.2.2.1.76
The number of errror recovery PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumErakPduTx 4.1.277.5.2.2.1.77
The number of error recovery acknowledge PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumErakPduRx 4.1.277.5.2.2.1.78
The number of errror recovery acknowledge PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumSdPduTx 4.1.277.5.2.2.1.79
The number of sequenced data PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumSdPduRx 4.1.277.5.2.2.1.80
The number of sequenced data PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumPollPduTx 4.1.277.5.2.2.1.81
The number of poll PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumPollPduRx 4.1.277.5.2.2.1.82
The number of poll PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumStatPduTx 4.1.277.5.2.2.1.83
The number of status PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumStatPduRx 4.1.277.5.2.2.1.84
The number of status PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumUstatPduTx 4.1.277.5.2.2.1.85
The number of unsolicited status PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumUstatPduRx 4.1.277.5.2.2.1.86
The number of unsolicited status PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumUdPduTx 4.1.277.5.2.2.1.87
The number of unnumbered user data PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumUdPduRx 4.1.277.5.2.2.1.88
The number of unnumbered user data PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumMdPduTx 4.1.277.5.2.2.1.89
The number of unnumbered management data PDU's transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmConfigQSaalNumMdPduRx 4.1.277.5.2.2.1.90
The number of unnumbered management data PDU's received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcAtmFailedCallTable 4.1.277.5.2.3
A table of objects describing the N most recent SVC failures per port, in FIFO order.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcAtmFailedCallEntry

svcAtmFailedCallEntry 4.1.277.5.2.3.1
The failed call entry contains objects relevant to abnormal SVC call failures.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SvcAtmFailedCallEntry  

svcAtmFailedCallIfIndex 4.1.277.5.2.3.1.1
The interface value of the corresponding MIB-II ifEntry for the port at which this call failure was declared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Index  

svcAtmFailedCallIndex 4.1.277.5.2.3.1.2
The instance number for this failed call at this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcAtmFailedCallDirection 4.1.277.5.2.3.1.3
The direction of the failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER caller(1), callee(2)  

svcAtmFailedCallPduType 4.1.277.5.2.3.1.4
The Pdu Type containing the cause IE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER release(1), addPartyReject(2), dropParty(3)  

svcAtmFailedCallPduDirection 4.1.277.5.2.3.1.5
Whether the terminating PDU was transmitted or received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER transmitted(1), received(2)  

svcAtmFailedCallCause 4.1.277.5.2.3.1.6
The failure cause contained in the cause IE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unalloc-nmb(1), no-route-transnet(2), no-route-dest(3), vcc-unacceptable-30(10), normal-call-clr-31(16), user-busy(17), no-user-response(18), call-reject(21), nmb-changed(22), call-reject-clir(23), dest-out-of-order(27), invalid-nmb-format(28), response-stat-enq(30), normal-unspecified(31), req-vcc-unavailable(35), vcc-fail-31(36), rate-unavail-31(37), network-out-of-order(38), temp-fail(41), access-info-discard(43), no-vcc-available(45), resources-unavailable(47), qos-unavailable(49), rate-unavailable-30(51), b-cap-not-authorized(57), b-cap-unavailable(58), service-unavailable(63), b-cap-not-implemented(65), combination-unsupported(73), aal-params-unsupp-31(78), invalid-call-reference(81), no-channel(82), dest-incompatible(88), invalid-endpoint-ref(89), invalid-transit-net(91), too-many-add-pty-req(92), aal-params-unsupp-30(93), info-element-missing(96), msg-type-not-imp(97), info-element-not-imp(99), invalid-info-element(100), message-not-compatible(101), timer-recovery(102), invalid-message-len(104), protocol-error(111), optional-element-error(127)  

svcAtmFailedCallLocation 4.1.277.5.2.3.1.7
The failure location contained in the cause IE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER user(1), privNetServLocal(2), pubNetServLocal(3), transitNet(4), pubNetServRemote(5), privNetServRemote(6), intlNet(7), netBeyondInterwkPt(8)  

svcAtmFailedCallDiagnostic 4.1.277.5.2.3.1.8
The diagnostic information contained in the cause IE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

svcAtmFailedCallCreationTime 4.1.277.5.2.3.1.9
The sysUpTime when this call was initiated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

svcAtmFailedCallTerminationTime 4.1.277.5.2.3.1.10
The sysUpTime when this call was terminated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

svcAtmFailedCallFailureNodeId 4.1.277.5.2.3.1.11
The node which caused the SVC failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcAtmFailedCallFailureIfIndex 4.1.277.5.2.3.1.12
The port on the failure node which caused the SVC failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Index  

svcAtmFailedCallCallingParty 4.1.277.5.2.3.1.13
The calling party number for this failed call, if present.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

svcAtmFailedCallCalledParty 4.1.277.5.2.3.1.14
The called party number for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

svcAtmFailedCallAtmTfdType 4.1.277.5.2.3.1.15
The combination of forward traffic parameters for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pcr-0-01(1), pcr-0-01-tag(2), pcr-01-scr-0-mbs-0(3), pcr-01-scr-0-mbs-0-tag(4), pcr-01(5), pcr-01-scr-01-mbs-01(6), pcr-01-bestEffort(7), unknown(8)  

svcAtmFailedCallAtmTfdParam1 4.1.277.5.2.3.1.16
Forward traffic descriptor parameter 1 for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcAtmFailedCallAtmTfdParam2 4.1.277.5.2.3.1.17
Forward traffic descriptor parameter 2 for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcAtmFailedCallAtmTfdParam3 4.1.277.5.2.3.1.18
Forward traffic descriptor parameter 3 for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcAtmFailedCallAtmQosClass 4.1.277.5.2.3.1.19
Forward QOS class for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcAtmFailedCallAtmRTfdType 4.1.277.5.2.3.1.20
The combination of reverse traffic parameters for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pcr-0-01(1), pcr-0-01-tag(2), pcr-01-scr-0-mbs-0(3), pcr-01-scr-0-mbs-0-tag(4), pcr-01(5), pcr-01-scr-01-mbs-01(6), pcr-01-bestEffort(7), unknown(8)  

svcAtmFailedCallAtmRTfdParam1 4.1.277.5.2.3.1.21
Reverse traffic descriptor parameter 1 for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcAtmFailedCallAtmRTfdParam2 4.1.277.5.2.3.1.22
Reverse traffic descriptor parameter 2 for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcAtmFailedCallAtmRTfdParam3 4.1.277.5.2.3.1.23
Reverse traffic descriptor parameter 3 for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcAtmFailedCallAtmRQoSClass 4.1.277.5.2.3.1.24
Reverse QOS class for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcAtmFailedCallBBearerClass 4.1.277.5.2.3.1.25
Broadband bearer class for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER class-A(1), class-C(3), class-X(16)  

svcAtmFailedCallBBearerTfcType 4.1.277.5.2.3.1.26
Broadband bearer traffic type for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notIndicated(1), cbr(2), vbr(3)  

svcAtmFailedCallBBearerTmgRqmt 4.1.277.5.2.3.1.27
Broadband bearer timing requirement for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notIndicated(1), required(2), not-required(3)  

svcAtmFailedCallBBearerUplaneCfg 4.1.277.5.2.3.1.28
Broadband bearer user plane configuration for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER point-point(1), point-multipoint(2)  

svcAtmFailedCallBBearerClippingSusc 4.1.277.5.2.3.1.29
Broadband bearer clipping susceptability for this failed call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-susceptible(1), susceptible(2)  

svcAtmFailedCallAdminStatus 4.1.277.5.2.3.1.30
All entries are initially invalid. Due to the FIFO nature of this table, once N entries have been created, all entries will always be valid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

swTable 4.1.277.6.1
A list of swEntry's. The number of entries is given by the value of swCardNumber
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwEntry

swEntry 4.1.277.6.1.1
The software entry contains objects describing the software cards.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SwEntry  

swLogicalSlotId 4.1.277.6.1.1.1
The logical slot number of this card. This is used as an index for the swTable. In redundant configurations, this can be the physical slot number of either redundant card. In non redundant configurations, this is the same as cardPhysicalSlotId.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

swRedundState 4.1.277.6.1.1.2
The current redundancy state of this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), standby(2)  

swRevision 4.1.277.6.1.1.3
The software revision number in the form (major.minor.maint.patch) where major == the major release number minor == the minor release number maint == a maintenance release based on major.minor patch == a patch release based on major.minor.maint
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

swBuildID 4.1.277.6.1.1.4
An identifier which uniquely identifies the software image within the scope of the release. The build ID is generated automatically through the build process and assigned to the software image during the final load generation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

swBuildDate 4.1.277.6.1.1.5
The date on which the software image was generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

swBuildDescription 4.1.277.6.1.1.6
A general description of the release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

swCopyrightNotice 4.1.277.6.1.1.7
Legalese describing the Copyrights covering this software image.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

swCapabilityMask 4.1.277.6.1.1.8
A 32-bit integer which bitmaps optional or additional features supported by this software release. For use by the NMS in determining capabilities of the software. The significance of this bitmap varies by release. For Cascade internal use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

swFeatureMask 4.1.277.6.1.1.9
A 32-bit integer which bitmaps optional or additional features supported by this software release. For use by the NMS in determining capabilities of the software. The significance of this bitmap varies by release. For Cascade internal use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

swPatchMask 4.1.277.6.1.1.10
A 32-bit integer which bitmaps incremental patches which have been applied to the software release. The significance of this bitmap varies by release. For Cascade internal use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

swBuildUserId 4.1.277.6.1.1.11
The user ID of the person responsible for generating the software image. For Cascade internal use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

swBuildView 4.1.277.6.1.1.12
Source control information for image generation. For Cascade internal use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

swBuildConfigSpec 4.1.277.6.1.1.13
Source control information for image generation. For Cascade internal use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nodeBoardInserted 1
This trap indicates that a board has been inserted into the indicated slot.
TRAP-TYPE    

nodeBoardPulled 2
This trap indicates that a board has been pulled out from the indicated slot.
TRAP-TYPE    

nodeBoardMismatch 3
This trap indicates that the actual board type on the indicated slot is inconsistent with what is configured.
TRAP-TYPE    

nodePsAStatusChange 4
This trap indicates that the power supply A has changed state (toggled between up and down states).
TRAP-TYPE    

nodePsBStatusChange 5
This trap indicates that the power supply B has changed state (toggled between up and down states).
TRAP-TYPE    

nodeFanStatusChange 6
This trap indicates that a fan has changed state (toggled between up and down states).
TRAP-TYPE    

nodeSwDownloadComplete 7
This trap indicates that a software download was complete.
TRAP-TYPE    

nodeSwDownloadFailed 8
This trap indicates that a software download failed.
TRAP-TYPE    

nodePrDownloadComplete 9
This trap indicates that a PRAM download was complete.
TRAP-TYPE    

nodePrDownloadFailed 10
This trap indicates that a PRAM download failed.
TRAP-TYPE    

nodeTracefull 11
This trap indicates that the node trace table was full and has been copied to a TFTP buffer awaiting to be xfered to the NMS.
TRAP-TYPE    

nodeDiagLogfull 12
This trap indicates that the diagnostic log table was full and has been copied to a TFTP buffer awaiting to be xfered to the NMS.
TRAP-TYPE    

nodeFlashMemErr 13
This trap indicates that a checksum or CRC-32 error occurred in Flash.
TRAP-TYPE    

nodePramErr 14
This trap indicates that a checksum error or battery problem occurred in PRAM.
TRAP-TYPE    

nodeRamErr 15
This trap indicates that an I/O error occurred in DRAM or SRAM.
TRAP-TYPE    

nodeInternalErr 16
This trap indicates that a fatal internal hardware or software error encountered and system needs to be re-booted.
TRAP-TYPE    

pportStatusChange 17
This trap indicates that the indicated physical port has changed state.
TRAP-TYPE    

lportCongests 18
This trap indicates that the rate of entering severely and absolutely congested state on the indicated logical port has exceeded the threshold.
TRAP-TYPE    

trkStatusChange 19
This trap indicates that the trunk associated with the indicated logical port has changed state.
TRAP-TYPE    

cktDlciStatusChange 20
This trap indicates that the user-to-user PVC state has been changed for this virtual circuit. It has either been created or invalidated, or has toggled between the active and inactive states.
TRAP-TYPE    

cktDlciReroute 21
This trap indicates that a PVC has been re-routed.
TRAP-TYPE    

pportInterfaceMismatch 22
This trap indicates the actual physical interface is different than the configured physical interface.
TRAP-TYPE    

lportErrorExceedThreshold 23
This trap indicates the frame errors per minute on this lport exceeded the threshold.
TRAP-TYPE    

nodeErrorReport 24
A component in the switch discovered a non-fatal error condition.
TRAP-TYPE    

cktGrpStatusChange 25
Circuits on interfaces go up or down.
TRAP-TYPE    

nodeUserLogin 26
An user has logged in STDX through either serial console or telnet.
TRAP-TYPE    

nodeUserLogout 27
An user has logged out.
TRAP-TYPE    

cardUp 28
This trap indicates that an intelligent card has transitioned to an ACTIVE state.
TRAP-TYPE    

cardDown 29
This trap indicates that an intelligent card has transitioned to a NON-ACTIVE state.
TRAP-TYPE    

lnkStatusChange 30
This trap indicates that the link status (Link protocol) associated with the indicated logical port has changed state.
TRAP-TYPE    

lnkSmdsHbpNaTca 31
This trap indicates that non-Ack count for SMDS DXI heartbeat poll exceedes the threshold. The non-Ack count is reset every 15 minutes.
TRAP-TYPE    

lnkSmdsDiscardTca 32
This trap indicates that Total Discard packet count for SMDS packet exceedes the threshold. ( This trap has not been implemented in this release yet ).
TRAP-TYPE    

cardRedundSwitchOver 33
This trap indicates that the card in the specified slot has shot its active partner and has become the active card of the pair.
TRAP-TYPE    

cardErrorReport 34
The specified card discovered a non-fatal error condition.
TRAP-TYPE    

svcSetup 35
This trap is generated by the ingress switch whenever a Frame Relay Svc is setup or cleared. cktStatus indicates whether it is a setup or a clearing.
TRAP-TYPE    

svcClearing 36
Reserved for Frame Relay SVC.
TRAP-TYPE    

svcFailure 37
This trap is generated by the ingress switch whenever a Frame Relay svc setup fails. cktSvcCause contains the cause number.
TRAP-TYPE    

trkBuAttempt 38
This trap indicates that an attempt to establish the backup trunk associated with the indicated logical port is being made.
TRAP-TYPE    

trkBuFailure 39
This trap indicates that the primary trunk associated with the indicated logical port has not been backed up or the backup trunk associated with the indicated logical port has not been restored. The reason for failure is provided. The lportBuFailReason indicates the trunk type as follows: lportBuFailReson Trunk Type buTrkNotDef primary trunk buTrkNotEstab backup trunk
TRAP-TYPE    

trkBuReleased 40
This trap indicates that the backup trunk associated with the indicated logical port has been released.
TRAP-TYPE    

pportDS0LoopUpChange 41
This trap indicates one or more DS0's have gone into loopback.pportDS0LoopUpStatus reports the DS0's that have gone into loopback.
TRAP-TYPE    

pportDS0LoopDownChange 42
This trap indicates one or more DS0's have gone out of loopback.pportDS0LoopDownStatus reports the DS0's that have gone out of loopback.
TRAP-TYPE    

lportISDNCallRej 43
This trap indicates that a call has been rejected due either the inability to authenticate the call or lack of B-channel pool resources.
TRAP-TYPE    

pportdsx3LoopChange 44
This trap indicates when the DS3 or E3 has changed its current loopback state.
TRAP-TYPE    

pportds1LoopChange 45
This trap indicates when the DS1 has changed its current loopback state.
TRAP-TYPE    

pportExtClockBackup 46
This trap indicates that a pport has lost the external clock source and is switching over to the backup clock selected.
TRAP-TYPE    

pportExtClockRestore 47
This trap indicates that external clock is recovered and the pport will switch back to external clock.
TRAP-TYPE    

pportExtClkCapabilityMismatch 48
This trap indicates the port on this card (and the card itself) is not capable of running external clock.
TRAP-TYPE    

nodeFileTransferReport 49
Reporting the outcome of a previous file transfer request. nodeFileTransferRequest specifies the request and nodeFileTransferStatus gives the outcome.
TRAP-TYPE    

nodeBillingUsageRecOvflWarning 50
Warning that a usage record counter-value overflow condition has occurred while aggregating usage data recently collected from one or more IOPs. An overflow condition exists when an attempt was made to update a usage record counter, but such an update would have overflowed the counter. In this case, the usage record is closed and a new one is opened, if there is sufficient space in the service's aggregated usage data store.
TRAP-TYPE    

nodeBillingUsageRecCrFailed 51
Notification that a usage record could not be created.
TRAP-TYPE    

nodeBillingStateChange 52
Notification that billing has been enabled or disabled on the switch. This trap is generated at switch boot or when the value of the nodeBilling object is modified.
TRAP-TYPE    

lportBillingStateChange 53
Notification that billing has been enabled or disabled on a particular logical port. This trap is generated the value of the lportBilling is modified for a particular port; this trap IS NOT generated when the global nodeBilling is modified or when at switch boot.
TRAP-TYPE    

nodeBillingSwAPCommsFailure 54
Notification that switch to Adjunct Processor communication has failed and that a usage file transfer has failed to complete.
TRAP-TYPE    

svcAtmFailedCall 55
Notification that one or more SVC call failures have been logged in the svcAtmFailedCallTable.
TRAP-TYPE    

svcAtmSigStatusChange 56
Notification that the status of the ATM signalling function has changed on the port.
TRAP-TYPE    

lportCBRLineDataError 57
This trap indicates the error state of the CBR lport.
TRAP-TYPE    

clkSourceSwitch 58
This trap indicates that the CBR port switched its clock method.
TRAP-TYPE    

clkSourceFailure 59
This trap indicates that the clock generation unit switched between holdover mode and synchronization to reference clock.
TRAP-TYPE    

lportSmdsSip3SaNotFoundTca 60
This trap indicates that the number of Sa Not Found violations exceeded the specified Smds pdu violation threshold for the logical port.
TRAP-TYPE    

lportSmdsSip3SaDaOnSamePortTca 61
This trap indicates that the number of Sa Da On Same Port violations exceeded the specified Smds pdu violation threshold for the logical port.
TRAP-TYPE    

lportSmdsSip3DstGaNotFoundTca 62
This trap indicates that the number of Dst Ga Not Found violations exceeded the specified Smds pdu violation threshold for the logical port.
TRAP-TYPE    

lportSmdsSip3DstIaScrnFailTca 63
This trap indicates that the number of Dst Ia Scrn Fail violations exceeded the specified Smds pdu violation threshold for the logical port.
TRAP-TYPE    

lportSmdsSip3SaValFailTca 64
This trap indicates that the number of Sa Val Fail violations exceeded the specified Smds pdu violation threshold for the logical port.
TRAP-TYPE    

lportSmdsSip3DstIaNotFoundTca 65
This trap indicates that the number of Dst Ia Not Found violations exceeded the specified Smds pdu violation threshold for the logical port.
TRAP-TYPE    

lportSmdsSip3SrcIaScrnFailTca 66
This trap indicates that the number of Src Ia Scrn Fail violations exceeded the specified Smds pdu violation threshold for the logical port.
TRAP-TYPE    

lportSmdsSip3DstGaScrnFailTca 67
This trap indicates that the number of Dst Ga Scrn Fail violations exceeded the specified Smds pdu violation threshold for the logical port.
TRAP-TYPE    

lportSmdsDxi2LinkIdInvalidTca 68
This trap indicates that the number of Link Id Invalid violations exceeded the specified Smds pdu violation threshold for the logical port.
TRAP-TYPE    

nodePrimarySyncReferenceChange 69
Notification that the Primary Synchronization Reference operational state has changed.
TRAP-TYPE    

nodeSecondarySyncReferenceChange 70
Notification that the Secondary Synchronization Reference operational state has changed.
TRAP-TYPE    

nodeExternalClockAChange 71
Notification that the External Reference Clock A operational state has changed.
TRAP-TYPE    

nodeExternalClockBChange 72
Notification that the External Reference Clock B operational state has changed.
TRAP-TYPE    

nodePortReferenceAChange 73
Notification that the Port Reference Clock A operational state has changed.
TRAP-TYPE    

nodePortReferenceBChange 74
Notification that the Port Reference Clock B operational state has changed.
TRAP-TYPE    

pportDS0InitiateLpbkFailure 75
This trap indicates that the DS0 requested to be set into far end loopback has failed to do so.
TRAP-TYPE    

pportDS0InitiateLpbkSuccess 76
This trap indicates that the DS0 requested to be set into far end loopback has succeeded.
TRAP-TYPE    

lportISDNIpAddrRej 77
This trap indicates that an Ip Address assignment failed.
TRAP-TYPE    

cktAtmStatusChange 78
This trap indicates that the user-to-user ATM PVC state has been changed for this virtual circuit. It has either been created or invalidated, or has toggled between the active and inactive states.
TRAP-TYPE    

cktAtmReroute 79
This trap indicates that an ATM PVC has been re-routed.
TRAP-TYPE    

cardTransmitClockStatusChange 80
This trap indicates the IOM transmit clock synchronization status has chnaged.
TRAP-TYPE    

cardSystemPrimaryClockStatusChange 81
This trap indicates that the IOM system primary clock reference status has changed.
TRAP-TYPE    

cardSystemSecondaryClockStatusChange 82
This trap indicates that the IOM system primary clock reference status has changed.
TRAP-TYPE