CABH-IETF-QOS-MIB

File: CABH-IETF-QOS-MIB.mib (22282 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
INET-ADDRESS-MIB IF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
mib-2 TimeStamp TruthValue
RowStatus OBJECT-GROUP MODULE-COMPLIANCE
InetPortNumber InetAddressType InetAddress
ifIndex

Defined Types

CabhPriorityQosMasterEntry  
SEQUENCE    
  cabhPriorityQosMasterApplicationId Unsigned32
  cabhPriorityQosMasterDefaultCHPriority Unsigned32
  cabhPriorityQosMasterRowStatus RowStatus

CabhPriorityQosBpEntry  
SEQUENCE    
  cabhPriorityQosBpIpAddrType InetAddressType
  cabhPriorityQosBpIpAddr InetAddress
  cabhPriorityQosBpApplicationId Unsigned32
  cabhPriorityQosBpDefaultCHPriority Unsigned32
  cabhPriorityQosBpIndex Unsigned32

CabhPriorityQosBpDestEntry  
SEQUENCE    
  cabhPriorityQosBpDestIndex Unsigned32
  cabhPriorityQosBpDestIpAddrType InetAddressType
  cabhPriorityQosBpDestIpAddr InetAddress
  cabhPriorityQosBpDestPort InetPortNumber
  cabhPriorityQosBpDestIpPortPriority Unsigned32

CabhPriorityQosPsIfAttribEntry  
SEQUENCE    
  cabhPriorityQosPsIfAttribIfNumPriorities Unsigned32
  cabhPriorityQosPsIfAttribIfNumQueues Unsigned32

Defined Values

cabhQosMib 1.3.6.1.2.1.1
This MIB module supplies parameters for the configuration and monitoring of CableHome prioritized QoS capability. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC xxxx; see the RFC itself for full legal notices.
MODULE-IDENTITY    

cabhQosMibObjects 1.3.6.1.2.1.1.1
OBJECT IDENTIFIER    

cabhPriorityQosMibObjects 1.3.6.1.2.1.1.1.1
OBJECT IDENTIFIER    

cabhPriorityQosBase 1.3.6.1.2.1.1.1.1.1
OBJECT IDENTIFIER    

cabhPriorityQosBp 1.3.6.1.2.1.1.1.1.2
OBJECT IDENTIFIER    

cabhPriorityQosPs 1.3.6.1.2.1.1.1.1.3
OBJECT IDENTIFIER    

cabhPriorityQosMasterTable 1.3.6.1.2.1.1.1.1.1.1
This table contains a list of mappings for Application IDs to Default CableHome Priorities.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CabhPriorityQosMasterEntry

cabhPriorityQosMasterEntry 1.3.6.1.2.1.1.1.1.1.1.1
An entry for mapping Application IDs to Default CableHome Priorities.
Status: current Access: not-accessible
OBJECT-TYPE    
  CabhPriorityQosMasterEntry  

cabhPriorityQosMasterApplicationId 1.3.6.1.2.1.1.1.1.1.1.1.1
The IANA well-known port number identifying an application.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cabhPriorityQosMasterDefaultCHPriority 1.3.6.1.2.1.1.1.1.1.1.1.2
The PriorityQos priority assigned to the application.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..7  

cabhPriorityQosMasterRowStatus 1.3.6.1.2.1.1.1.1.1.1.1.3
The Row Status interlock for creation and deletion of row entries. Specifying only this object (with the appropriate index) on a PS is sufficient to create a row with default values. There is no restrictions to change the value of cabhPriorityQosMasterDefaultCHPriority in a row while this object is set to active.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cabhPriorityQosSetToFactory 1.3.6.1.2.1.1.1.1.1.2
When this object is set to true(1), the PS MUST clear all the entries in the cabhPriorityQosBpTable and cabhPriorityQosBpDestTable. Reading this object always returns false(2).
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cabhPriorityQosLastSetToFactory 1.3.6.1.2.1.1.1.1.1.3
The value of sysUpTime when cabhPriorityQosSetToFactory was last set to true. Zero if never reset.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cabhPriorityQosBpTable 1.3.6.1.2.1.1.1.1.2.1
This table contains the priorities for each of the discovered CableHome Host (BP) applications and related data.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CabhPriorityQosBpEntry

cabhPriorityQosBpEntry 1.3.6.1.2.1.1.1.1.2.1.1
List of applications entries. Implementors need to be aware that if the size of cabhPriorityQosBpIpAddr exceeds 113 octets then OIDs of column instances in this table will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
Status: current Access: not-accessible
OBJECT-TYPE    
  CabhPriorityQosBpEntry  

cabhPriorityQosBpIpAddrType 1.3.6.1.2.1.1.1.1.2.1.1.1
The type of the IP address assigned to a particular BP element.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cabhPriorityQosBpIpAddr 1.3.6.1.2.1.1.1.1.2.1.1.2
The IP address assigned to a particular BP element.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

cabhPriorityQosBpApplicationId 1.3.6.1.2.1.1.1.1.2.1.1.3
The IANA well-known port number assigned to a particular application implemented on the CableHome Host device in which this BP resides.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cabhPriorityQosBpDefaultCHPriority 1.3.6.1.2.1.1.1.1.2.1.1.4
The PriorityQos priority assigned to a particular application implemented on CableHome Host device in which this BP resides. The PS populates this entry according to the Application Priority Master Table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cabhPriorityQosBpIndex 1.3.6.1.2.1.1.1.1.2.1.1.5
The unique identifier for a particular row in the BP Application Priority Table. This identifier is used as an index into the 'nested' Destination Priority Table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cabhPriorityQosBpDestTable 1.3.6.1.2.1.1.1.1.2.2
This table contains the priorities based on destination IP address and port number. It is indexed with a unique identifier for rows in the BP Application Priority Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CabhPriorityQosBpDestEntry

cabhPriorityQosBpDestEntry 1.3.6.1.2.1.1.1.1.2.2.1
List of Destination IP addresses and port numbers for an application to which special PriorityQos priority is provisioned. Implementors need to be aware that if the size of cabhPriorityQosBpIpAddr exceeds 112 octets then OIDs of column instances in this table will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
Status: current Access: not-accessible
OBJECT-TYPE    
  CabhPriorityQosBpDestEntry  

cabhPriorityQosBpDestIndex 1.3.6.1.2.1.1.1.1.2.2.1.1
The locally unique index into the Destination Priority Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cabhPriorityQosBpDestIpAddrType 1.3.6.1.2.1.1.1.1.2.2.1.2
The type of the Destination IP Address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cabhPriorityQosBpDestIpAddr 1.3.6.1.2.1.1.1.1.2.2.1.3
The Destination IP address of the LAN IP Device of an application to which special PriorityQos priority is assigned.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

cabhPriorityQosBpDestPort 1.3.6.1.2.1.1.1.1.2.2.1.4
The port number of an application to which special PriorityQos priority is assigned.
Status: current Access: read-only
OBJECT-TYPE    
  InetPortNumber  

cabhPriorityQosBpDestIpPortPriority 1.3.6.1.2.1.1.1.1.2.2.1.5
The PriorityQos priority assigned to a particular application in another LAN IP Device.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8  

cabhPriorityQosPsIfAttribTable 1.3.6.1.2.1.1.1.1.3.1
This table contains the number of media access priorities and number of queues associated with each LAN interface in the Residential Gateway.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CabhPriorityQosPsIfAttribEntry

cabhPriorityQosPsIfAttribEntry 1.3.6.1.2.1.1.1.1.3.1.1
Number of media access priorities and number of queues for each LAN interface in the Residential Gateway. This table applies only to interfaces through which data flows.
Status: current Access: not-accessible
OBJECT-TYPE    
  CabhPriorityQosPsIfAttribEntry  

cabhPriorityQosPsIfAttribIfNumPriorities 1.3.6.1.2.1.1.1.1.3.1.1.1
The number of media access priorities supported by this LAN interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8  

cabhPriorityQosPsIfAttribIfNumQueues 1.3.6.1.2.1.1.1.1.3.1.1.2
The number of queues associated with this LAN interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8  

cabhQosNotification 1.3.6.1.2.1.1.2
OBJECT IDENTIFIER    

cabhPriorityQosNotification 1.3.6.1.2.1.1.2.1
OBJECT IDENTIFIER    

cabhQosConformance 1.3.6.1.2.1.1.3
OBJECT IDENTIFIER    

cabhPriorityQosConformance 1.3.6.1.2.1.1.3.1
OBJECT IDENTIFIER    

cabhPriorityQosGroups 1.3.6.1.2.1.1.3.1.1
OBJECT IDENTIFIER    

cabhPriorityQosCompliances 1.3.6.1.2.1.1.3.1.2
OBJECT IDENTIFIER    

cabhPriorityQosCompliance 1.3.6.1.2.1.1.3.1.2.1
The compliance statement for devices that implement CableHome 1.1 PriorityQos capability.
Status: current Access: read-only
MODULE-COMPLIANCE    

cabhPriorityQosGroup 1.3.6.1.2.1.1.3.1.1.1
Group of objects for CableHome Application Priority MIB.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor