C-PRODUCT-QSIM-MIB

File: C-PRODUCT-QSIM-MIB.mib (25991 bytes)

Imported modules

C-PRODUCT-GROUP-MIB C-PRODUCT-BASE-MIB RFC-1212

Imported symbols

qsim cardSlot portSlot
portNumber vcpSideId OBJECT-TYPE

Defined Types

PinStatus  
INTEGER off(1), on(2)    

QsimCardEntry  
SEQUENCE    
  qsimCardMaxFrameSize INTEGER

QsimPortEntry  
SEQUENCE    
  qsimPortLinkType INTEGER
  qsimPortCableType INTEGER
  qsimPortTermTimingSource INTEGER
  qsimPortReceiveTimingPhase INTEGER
  qsimPortDataRate INTEGER
  qsimPortMinFlagBytes INTEGER
  qsimPortFcsSize INTEGER
  qsimPortRts PinStatus
  qsimPortCts PinStatus
  qsimPortDcd PinStatus
  qsimPortDsr PinStatus

HsimPortEntry  
SEQUENCE    
  hsimPortLinkType INTEGER
  hsimPortDceDteMode INTEGER
  hsimPortDataRate INTEGER
  hsimPortMinFlagBytes INTEGER
  hsimPortFcsSize INTEGER
  hsimPortTa PinStatus
  hsimPortCa PinStatus

QsimLmiEntry  
SEQUENCE    
  qsimLmiProtocol INTEGER
  qsimLmiProcedure INTEGER
  qsimLmiUserT391 INTEGER
  qsimLmiUserN391 INTEGER
  qsimLmiUserN392 INTEGER
  qsimLmiUserN393 INTEGER
  qsimLmiNetworkT392 INTEGER
  qsimLmiNetworkN392 INTEGER
  qsimLmiNetworkN393 INTEGER

QsimNewSdlcVcEntry  
SEQUENCE    
  qsimNewSdlcVcShapper INTEGER

QsimNewDxiVcEntry  
SEQUENCE    
  qsimNewDxiVcDfaVpi INTEGER
  qsimNewDxiVcDfaVci INTEGER
  qsimNewDxiVcDfaVciRange INTEGER
  qsimNewDxiVcShapper INTEGER

QsimNewFrameRelayVcEntry  
SEQUENCE    
  qsimNewFrameRelayVcInterworking INTEGER
  qsimNewFrameRelayVcEncapsulation INTEGER
  qsimNewFrameRelayVcDe2Clp INTEGER
  qsimNewFrameRelayVcClp2De INTEGER
  qsimNewFrameRelayVcFecnToEfci INTEGER
  qsimNewFrameRelayVcShapper INTEGER
  qsimNewFrameRelayVcDlci INTEGER
  qsimNewFrameRelayVcFrSscsDlci INTEGER
  qsimNewFrameRelayVcStatus INTEGER

Defined Values

qsimCard 1.3.6.1.4.1.43.1.12.1.1.12.1
OBJECT IDENTIFIER    

qsimPort 1.3.6.1.4.1.43.1.12.1.1.12.2
OBJECT IDENTIFIER    

hsimPort 1.3.6.1.4.1.43.1.12.1.1.12.3
OBJECT IDENTIFIER    

qsimVc 1.3.6.1.4.1.43.1.12.1.1.12.4
OBJECT IDENTIFIER    

qsimLmi 1.3.6.1.4.1.43.1.12.1.1.12.6
OBJECT IDENTIFIER    

qsimNewVc 1.3.6.1.4.1.43.1.12.1.1.12.9
OBJECT IDENTIFIER    

qsimSdlcVc 1.3.6.1.4.1.43.1.12.1.1.12.4.1
OBJECT IDENTIFIER    

qsimDxiVc 1.3.6.1.4.1.43.1.12.1.1.12.4.2
OBJECT IDENTIFIER    

qsimFrameRelayVc 1.3.6.1.4.1.43.1.12.1.1.12.4.3
OBJECT IDENTIFIER    

qsimNewSdlcVc 1.3.6.1.4.1.43.1.12.1.1.12.9.1
OBJECT IDENTIFIER    

qsimNewDxiVc 1.3.6.1.4.1.43.1.12.1.1.12.9.2
OBJECT IDENTIFIER    

qsimNewFrameRelayVc 1.3.6.1.4.1.43.1.12.1.1.12.9.3
OBJECT IDENTIFIER    

qsimCardTable 1.3.6.1.4.1.43.1.12.1.1.12.1.1
Card configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QsimCardEntry

qsimCardEntry 1.3.6.1.4.1.43.1.12.1.1.12.1.1.1
Card configuration entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  QsimCardEntry  

qsimCardMaxFrameSize 1.3.6.1.4.1.43.1.12.1.1.12.1.1.1.1
Maximum frame size for SDLC, DXI and Frame Relay frames. WARNING: Change of the Maximum Frame Size will cause Disruption of Service provided by the card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mfs-2kb(1), mfs-4kb(2), mfs-8kb(3)  

qsimPortTable 1.3.6.1.4.1.43.1.12.1.1.12.2.1
QSIM port configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QsimPortEntry

qsimPortEntry 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1
QSIM port configuration entry. The slot number (portSlot) of this card can be from 4 to 6. The port number (portNumber) can be from 1 to 4.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  QsimPortEntry  

qsimPortLinkType 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.1
Link layer protocol supported by the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dxi(1), sdlc(2), frame-relay(3)  

qsimPortCableType 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.2
Type of cable connected to the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), dte(2), dce(3)  

qsimPortTermTimingSource 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.3
Terminal timing source. This object applies ONLY when a DCE cable is connected to the port. If cable type is 'none' or 'dce', this object can be read and written. If cable type is 'dte', a get request returns whatever value currently stored in the managed node for this port and a set request returns genErr.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

qsimPortReceiveTimingPhase 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.4
Receive timing phase control. This object applies ONLY when a DCE cable is connected to the port. If cable type is 'none' or 'dce', this object can be read and written. If cable type is 'dte', a get request returns whatever value currently stored in the managed node for this port and a set request returns genErr.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), inverted(2)  

qsimPortDataRate 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.5
Data rate supported by the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dr-64k(1), dr-128k(2), dr-256k(3), dr-512k(4), dr-1m(5), dr-2m(6), dr-4m(7), dr-8m(8)  

qsimPortMinFlagBytes 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.6
Minimum flag bytes required to distinguish a frame.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fb-1(1), fb-2(2)  

qsimPortFcsSize 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.7
Number of bytes in the FCS field of a frame.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fcs-2(1), fcs-4(2)  

qsimPortRts 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.8
RTS pin status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PinStatus  

qsimPortCts 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.9
CTS pin status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PinStatus  

qsimPortDcd 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.10
DCD pin status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PinStatus  

qsimPortDsr 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.11
DSR pin status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PinStatus  

hsimPortTable 1.3.6.1.4.1.43.1.12.1.1.12.3.1
HSIM port configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HsimPortEntry

hsimPortEntry 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1
HSIM port configuration entry. The slot number (portSlot) of this card can be from 4 to 6. The port number (portNumber) of this card is always 1.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HsimPortEntry  

hsimPortLinkType 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.1
Link layer protocol supported by the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dxi(1), sdlc(2), frame-relay(3)  

hsimPortDceDteMode 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.2
DCE/DTE mode of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dce(1), dte(2)  

hsimPortDataRate 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.3
Data rate supported by the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dr-20m(1)  

hsimPortMinFlagBytes 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.4
Minimum flag bytes required to distinguish a frame.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fb-1(1), fb-2(2)  

hsimPortFcsSize 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.5
Number of bytes in the FCS field of a frame.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fcs-2(1), fcs-4(2)  

hsimPortTa 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.6
TA pin status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PinStatus  

hsimPortCa 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.7
CA pin status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PinStatus  

qsimLmiTable 1.3.6.1.4.1.43.1.12.1.1.12.6.1
LMI configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QsimLmiEntry

qsimLmiEntry 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1
LMI configuration entry. The slot number (portSlot) should be from 4 to 6. The port number (portNumber) is from 1 to 4 for QSIM card, 1 to 8 for FAM card, and 1 for HSIM card.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  QsimLmiEntry  

qsimLmiProtocol 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.1
LMI protocol supported by the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), q-933a(2), t1-617d(3)  

qsimLmiProcedure 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.2
LMI procedure supported by the port. This object applies when LMI Q.933 Annex A or T1.617 Annex D protocol is selected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER user-side(1), network-side(2), bidirectional(3)  

qsimLmiUserT391 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.3
User-side link integrity verification (LIV) polling timer. This object applies when LMI user-side or bidirectional procedure is selected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..180  

qsimLmiUserN391 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.4
User-side full status polling counter. This object applies when LMI user-side or bidirectional procedure is selected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

qsimLmiUserN392 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.5
User-side error threshold. This object applies when LMI user-side or bidirectional procedure is selected. User-side N392 should be less than or equal to user- side N393.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

qsimLmiUserN393 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.6
User-side monitored events count. This object applies when LMI user-side or bidirectional procedure is selected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

qsimLmiNetworkT392 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.7
Network-side polling verification timer. This object applies when LMI network-side or bidirectional procedure is selected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..200  

qsimLmiNetworkN392 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.8
Network-side error threshold. This object applies when LMI network-side or bidirectional procedure is selected. Network-side N392 should be less than or equal to Network- side N393.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

qsimLmiNetworkN393 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.9
Network-side monitored events count. This object applies when LMI network-side or bidirectional procedure is selected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

qsimNewSdlcVcTable 1.3.6.1.4.1.43.1.12.1.1.12.9.1.1
SDLC VC configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QsimNewSdlcVcEntry

qsimNewSdlcVcEntry 1.3.6.1.4.1.43.1.12.1.1.12.9.1.1.1
SDLC VC configuration entry. The slot number (vcPortSlot) of the VC can be from 4 to maxslots. The port number (vcPortPort) can be from 1 to 4.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  QsimNewSdlcVcEntry  

qsimNewSdlcVcShapper 1.3.6.1.4.1.43.1.12.1.1.12.9.1.1.1.1
Data rate supported by the SDLC VC. Depending on the type of card a VC is configured, the shapper numbers are assigned as follows: HSIM QSIM data rate data rate shapper number --------- --------- -------------- 1.5m 64k 1 3m 128k 2 4.5m 192k 3 6m 256k 4 7.5m 384k 5 9m 512k 6 10.5m 640k 7 12m 768k 8 13.5m 1m 9 15m 1.5m 10 16.5m 2m 11 18m 4m 12 20m 8m 13
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..13  

qsimNewDxiVcTable 1.3.6.1.4.1.43.1.12.1.1.12.9.2.1
DXI VC configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QsimNewDxiVcEntry

qsimNewDxiVcEntry 1.3.6.1.4.1.43.1.12.1.1.12.9.2.1.1
DXI VC configuration entry. The slot number (vcPortSlot) of the VC can be from 4 to 6. The port number (vcPortPort) can be from 1 to 4.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  QsimNewDxiVcEntry  

qsimNewDxiVcDfaVpi 1.3.6.1.4.1.43.1.12.1.1.12.9.2.1.1.1
DXI DFA VPI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

qsimNewDxiVcDfaVci 1.3.6.1.4.1.43.1.12.1.1.12.9.2.1.1.2
DXI DFA VCI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

qsimNewDxiVcDfaVciRange 1.3.6.1.4.1.43.1.12.1.1.12.9.2.1.1.3
DXI VCI range. This object is used to create a set of VCs whose VPI equals to the value of the instance of qsimDxiVcDfaVpi and whose VCIs are in the range FROM 'the value of the instance of qsimDxiVcDfaVci' TO 'the value of the instance of this object PLUS the value of the instance of qsiDxiVcDfaVci MINUS 1'. A successful set request will generate 1 to N VC entries in this table. Where N equals to the value of the instance of this object. A get request always returns 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..64  

qsimNewDxiVcShapper 1.3.6.1.4.1.43.1.12.1.1.12.9.2.1.1.4
Data rate supported by the DXI VC. Depending on the type of card a VC is configured, the shapper numbers are assigned as follows: HSIM QSIM data rate data rate shapper number --------- --------- -------------- 1.5m 64k 1 3m 128k 2 4.5m 192k 3 6m 256k 4 7.5m 384k 5 9m 512k 6 10.5m 640k 7 12m 768k 8 13.5m 1m 9 15m 1.5m 10 16.5m 2m 11 18m 4m 12 20m 8m 13
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..13  

qsimNewFrameRelayVcTable 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1
Frame relay VC configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QsimNewFrameRelayVcEntry

qsimNewFrameRelayVcEntry 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1
Frame relay VC configuration entry. The slot number (vcPortSlot) of the VC can be from 4 to maxslots. The port number (vcPortPort) can be from 1 to 4.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  QsimNewFrameRelayVcEntry  

qsimNewFrameRelayVcInterworking 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.1
Frame Relay/ATM interworking mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network(1), service(2)  

qsimNewFrameRelayVcEncapsulation 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.2
Encapsulation type. This object applies ONLY to service interworking.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER transparent(1), translation(2)  

qsimNewFrameRelayVcDe2Clp 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.3
If mode 1 mapping is desirable, the user shall select direct mapping. If mode 2 mapping is desirable, the user shall select always-0 or always-1 to map the CLP field to a constant value (0 or 1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER direct(1), always-0(2), always-1(3)  

qsimNewFrameRelayVcClp2De 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.4
For network interworking - The options are none and direct. If mode 1 mapping is desirable, the user shall select direct mapping. If mode 2 mapping is desirable, the user shall select none. The none option maps the DE field in FR-SSCS PDU to the core-Q.922 frame DE field and ignores the CLP field in the ATM cells. For service interworking - The options are direct, always-0 and always-1. If mode 1 mapping is desirable, the user shall select direct mapping. If mode 2 mapping is desirable, the user shall select always-0 or always-1 to map the DE field to a constant value (0 or 1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), direct(2), always-0(3), always-1(4)  

qsimNewFrameRelayVcFecnToEfci 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.5
This object applies ONLY to service interworking. If mode 1 mapping is desirable, direct mapping should be selected. If mode 2 mapping is desirable, always-0 should be selected to set the EFCI field to 'congestion not experienced'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER direct(1), always-0(2)  

qsimNewFrameRelayVcShapper 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.6
Data rate supported by the frame relay VC. Depending on the type of card a VC is configured, the shapper numbers are assigned as follows: HSIM QSIM data rate data rate shapper number --------- --------- -------------- 1.5m 64k 1 3m 128k 2 4.5m 192k 3 6m 256k 4 7.5m 384k 5 9m 512k 6 10.5m 640k 7 12m 768k 8 13.5m 1m 9 15m 1.5m 10 16.5m 2m 11 18m 4m 12 20m 8m 13
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..13  

qsimNewFrameRelayVcDlci 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.7
Frame relay DLCI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..991  

qsimNewFrameRelayVcFrSscsDlci 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.8
This object applies ONLY to network interworking. Its valid value is 16..991 and 1022.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

qsimNewFrameRelayVcStatus 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.9
Frame relay PVC operational status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER out-of-service(1), in-service(2), not-configured(3)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor