C-PRODUCT-E3-MIB

File: C-PRODUCT-E3-MIB.mib (7498 bytes)

Imported modules

C-PRODUCT-GROUP-MIB C-PRODUCT-BASE-MIB RFC1155-SMI
RFC-1212

Imported symbols

e3card portSlot portNumber
TimeAndDate Gauge OBJECT-TYPE

Defined Types

E3PortEntry  
SEQUENCE    
  e3PortLoopbackType INTEGER
  e3PortPeakRate INTEGER
  e3PortCellMap INTEGER
  e3PortScramble INTEGER
  e3PortTiming INTEGER
  e3PortPlcpTiming INTEGER
  e3PortCtxTiming INTEGER
  e3PortLineRate INTEGER

E3PortStatsEntry  
SEQUENCE    
  e3PortRxCells Gauge
  e3PortTxCells Gauge
  e3PortIdleUnassignedCells Gauge
  e3PortHCSErrorCells Gauge
  e3PortResetTimeDate TimeAndDate
  e3PortResetStats INTEGER
  e3PortUtilRxCells INTEGER
  e3PortUtilTxCells INTEGER

E3PortClearStatsEntry  
SEQUENCE    
  e3PortResetPMData INTEGER

Defined Values

e3Port 1.3.6.1.4.1.43.1.12.1.1.13.1
OBJECT IDENTIFIER    

e3PortStats 1.3.6.1.4.1.43.1.12.1.1.13.2
OBJECT IDENTIFIER    

e3PortClearStats 1.3.6.1.4.1.43.1.12.1.1.13.3
OBJECT IDENTIFIER    

e3PortTable 1.3.6.1.4.1.43.1.12.1.1.13.1.1
The E3 port information table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    E3PortEntry

e3PortEntry 1.3.6.1.4.1.43.1.12.1.1.13.1.1.1
Information about a E3 port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  E3PortEntry  

e3PortLoopbackType 1.3.6.1.4.1.43.1.12.1.1.13.1.1.1.1
Loopback type of the E3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), networkLine(2), localCard(3), networkCard(4)  

e3PortPeakRate 1.3.6.1.4.1.43.1.12.1.1.13.1.1.1.2
Peak data transfer rate of the E3 port. Unit: Mbps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..34  

e3PortCellMap 1.3.6.1.4.1.43.1.12.1.1.13.1.1.1.3
ATM cell mapping for the E3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), plcp(2)  

e3PortScramble 1.3.6.1.4.1.43.1.12.1.1.13.1.1.1.4
ATM payload scrambling for the E3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

e3PortTiming 1.3.6.1.4.1.43.1.12.1.1.13.1.1.1.5
E3 timing source.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER loop(1), system(2)  

e3PortPlcpTiming 1.3.6.1.4.1.43.1.12.1.1.13.1.1.1.6
PLCP timing source for the E3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e3Timing(1), systemClock(2)  

e3PortCtxTiming 1.3.6.1.4.1.43.1.12.1.1.13.1.1.1.7
CTX timing source for the E3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e3plcpClock(1), e3rxClock(2)  

e3PortLineRate 1.3.6.1.4.1.43.1.12.1.1.13.1.1.1.8
Physical Line data transfer rate of the E3 port. Unit: CPS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

e3PortStatsTable 1.3.6.1.4.1.43.1.12.1.1.13.2.1
The E3 port stats information table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    E3PortStatsEntry

e3PortStatsEntry 1.3.6.1.4.1.43.1.12.1.1.13.2.1.1
Information about a E3 port stats.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  E3PortStatsEntry  

e3PortRxCells 1.3.6.1.4.1.43.1.12.1.1.13.2.1.1.1
The counter associated with the received cells, encountered on the ATM interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

e3PortTxCells 1.3.6.1.4.1.43.1.12.1.1.13.2.1.1.2
The counter associated with the transmitted cells, encountered on the ATM interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

e3PortIdleUnassignedCells 1.3.6.1.4.1.43.1.12.1.1.13.2.1.1.3
The counter associated with the idle/unassigned cells, encountered on the ATM interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

e3PortHCSErrorCells 1.3.6.1.4.1.43.1.12.1.1.13.2.1.1.4
The counter associated with the HCS errored cells, encountered on the ATM interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

e3PortResetTimeDate 1.3.6.1.4.1.43.1.12.1.1.13.2.1.1.5
The reset time and date of ATM stats on this ATM interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeAndDate  

e3PortResetStats 1.3.6.1.4.1.43.1.12.1.1.13.2.1.1.6
This field is used to reset the atm statistics for the e3 port. If a get is performed on this command, the result will always be zero
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER reset(1)  

e3PortUtilRxCells 1.3.6.1.4.1.43.1.12.1.1.13.2.1.1.7
The Utilization of received Cell is calculcated as received cells divided by Line Rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

e3PortUtilTxCells 1.3.6.1.4.1.43.1.12.1.1.13.2.1.1.8
The Utilization of transmitted Cell is calculcated as transmitted cells divided by Line Rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

e3PortClearStatsTable 1.3.6.1.4.1.43.1.12.1.1.13.3.1
The E3 reset statistics for peformance monitoring data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    E3PortClearStatsEntry

e3PortClearStatsEntry 1.3.6.1.4.1.43.1.12.1.1.13.3.1.1
Information about E3 port reset performance monitoring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  E3PortClearStatsEntry  

e3PortResetPMData 1.3.6.1.4.1.43.1.12.1.1.13.3.1.1.1
This field is used to reset the performance monitoring data for the e3 port. If a get is performed on this command, the result will always be zero
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER reset(1)