BLADETYPE2-ACL-MIB

File: BLADETYPE2-ACL-MIB.mib (41642 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC HP-SWITCH-PL-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 IpAddress MacAddress
hpSwitchBladeType2-Mgmt

Defined Types

AclCurCfgEntry  
SEQUENCE    
  aclCurCfgIndex Unsigned32
  aclCurCfgBlock Unsigned32
  aclCurCfgGroup Unsigned32
  aclCurCfgFilterAction INTEGER
  aclCurCfgFilterActionSetCOS INTEGER
  aclCurCfgEthFmt INTEGER
  aclCurCfgTagFmt INTEGER
  aclCurCfgSrcMACAddress MacAddress
  aclCurCfgSrcMACMask MacAddress
  aclCurCfgDstMACAddress MacAddress
  aclCurCfgDstMACMask MacAddress
  aclCurCfgEthernetTypeName INTEGER
  aclCurCfgEthernetTypeValue INTEGER
  aclCurCfgVLanId INTEGER
  aclCurCfgVLanMask INTEGER
  aclCurCfg8021pPriority INTEGER
  aclCurCfgTypeOfService INTEGER
  aclCurCfgProtocol INTEGER
  aclCurCfgSrcIPAddress IpAddress
  aclCurCfgSrcIPMask IpAddress
  aclCurCfgDstIPAddress IpAddress
  aclCurCfgDstIPMask IpAddress
  aclCurCfgSrcPort INTEGER
  aclCurCfgSrcPortMask INTEGER
  aclCurCfgDstPort INTEGER
  aclCurCfgDstPortMask INTEGER
  aclCurCfgTCPFlags BITS
  aclCurCfgTCPFlagsMask BITS
  aclCurCfgEgressPorts OCTET STRING
  aclCurCfgStatistics INTEGER

AclNewCfgEntry  
SEQUENCE    
  aclNewCfgIndex Unsigned32
  aclNewCfgBlock Unsigned32
  aclNewCfgGroup Unsigned32
  aclNewCfgFilterAction INTEGER
  aclNewCfgFilterActionSetCOS INTEGER
  aclNewCfgEthFmt INTEGER
  aclNewCfgTagFmt INTEGER
  aclNewCfgSrcMACAddress MacAddress
  aclNewCfgSrcMACMask MacAddress
  aclNewCfgDstMACAddress MacAddress
  aclNewCfgDstMACMask MacAddress
  aclNewCfgEthernetTypeName INTEGER
  aclNewCfgEthernetTypeValue INTEGER
  aclNewCfgVLanId INTEGER
  aclNewCfgVLanMask INTEGER
  aclNewCfg8021pPriority INTEGER
  aclNewCfgTypeOfService INTEGER
  aclNewCfgProtocol INTEGER
  aclNewCfgSrcIPAddress IpAddress
  aclNewCfgSrcIPMask IpAddress
  aclNewCfgDstIPAddress IpAddress
  aclNewCfgDstIPMask IpAddress
  aclNewCfgSrcPort INTEGER
  aclNewCfgSrcPortMask INTEGER
  aclNewCfgDstPort INTEGER
  aclNewCfgDstPortMask INTEGER
  aclNewCfgTCPFlags BITS
  aclNewCfgTCPFlagsMask BITS
  aclNewCfgEgressPorts OCTET STRING
  aclNewCfgStatistics INTEGER
  aclNewCfgAddEgressPort Unsigned32
  aclNewCfgRemoveEgressPort Unsigned32
  aclNewCfgDelete INTEGER

AclBlockCurCfgEntry  
SEQUENCE    
  aclBlockCurCfgIndex Unsigned32
  aclBlockCurCfgMemberAcls OCTET STRING

AclBlockNewCfgEntry  
SEQUENCE    
  aclBlockNewCfgIndex Unsigned32
  aclBlockNewCfgMemberAcls OCTET STRING
  aclBlockNewCfgAddAcl Unsigned32
  aclBlockNewCfgRemoveAcl Unsigned32
  aclBlockNewCfgDelete INTEGER

AclGroupCurCfgEntry  
SEQUENCE    
  aclGroupCurCfgIndex Unsigned32
  aclGroupCurCfgMemberAcls OCTET STRING
  aclGroupCurCfgMemberBlocks OCTET STRING

AclGroupNewCfgEntry  
SEQUENCE    
  aclGroupNewCfgIndex Unsigned32
  aclGroupNewCfgMemberAcls OCTET STRING
  aclGroupNewCfgMemberBlocks OCTET STRING
  aclGroupNewCfgAddAcl Unsigned32
  aclGroupNewCfgRemoveAcl Unsigned32
  aclGroupNewCfgAddBlock Unsigned32
  aclGroupNewCfgRemoveBlock Unsigned32
  aclGroupNewCfgDelete INTEGER

Defined Values

acl 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9
The MIB module for the Access Control List configuration and statistics.
MODULE-IDENTITY    

acConfig 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1
OBJECT IDENTIFIER    

acList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1
OBJECT IDENTIFIER    

aclBlock 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2
OBJECT IDENTIFIER    

aclGroup 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3
OBJECT IDENTIFIER    

aclCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1
The table of current ACL configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AclCurCfgEntry

aclCurCfgEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1
Current information about a particular ACL configuration entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AclCurCfgEntry  

aclCurCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.1
The index associated with this ACL entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

aclCurCfgBlock 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.2
The index of the ACL block to which this ACL entry is a member of. A value of zero means the ACL is not a member of any block.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

aclCurCfgGroup 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.3
The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

aclCurCfgFilterAction 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.4
The action to be performed on a packet that matches the filter settings of this ACL entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), permit(1), deny(2), setcos(3)  

aclCurCfgFilterActionSetCOS 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.5
The value to be used when the action to be performed is setCOS for this ACL entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), cos0(1), cos1(2), cos2(3), cos3(4), cos4(5), cos5(6), cos6(7), cos7(8)  

aclCurCfgEthFmt 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.6
The packet ethernet format to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), ethernet2(1), snap(2), llc(3), ieee802dot3(4)  

aclCurCfgTagFmt 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.7
The packet tag format to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER untagged(1), tagged(2)  

aclCurCfgSrcMACAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.9
The source MAC address to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

aclCurCfgSrcMACMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.10
The address mask applied to aclCurCfgSrcMACAddress for filtering.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

aclCurCfgDstMACAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.11
The destination MAC address to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

aclCurCfgDstMACMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.12
The address mask applied to aclCurCfgDstMACAddress for filtering.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

aclCurCfgEthernetTypeName 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.13
The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), arp(1), ipv4(2), ipv6(3), mpls(4), rarp(5), any(6), other(7)  

aclCurCfgEthernetTypeValue 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.14
The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

aclCurCfgVLanId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.15
The virtual LAN identifier to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

aclCurCfgVLanMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.16
The mask applied to aclCurCfgVLanId for filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

aclCurCfg8021pPriority 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.17
The 802.1p priority to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), priority0(1), priority1(2), priority2(3), priority3(4), priority4(5), priority5(6), priority6(7), priority7(8)  

aclCurCfgTypeOfService 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.18
The type of service to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

aclCurCfgProtocol 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.19
The protocol to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

aclCurCfgSrcIPAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.20
The source IP address to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

aclCurCfgSrcIPMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.21
The address mask applied to aclCurCfgSrcIPAddress for filtering.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

aclCurCfgDstIPAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.22
The destination IP address to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

aclCurCfgDstIPMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.23
The address mask applied to aclCurCfgDstIPAddress for filtering.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

aclCurCfgSrcPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.24
The source TCP/UDP port number to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

aclCurCfgSrcPortMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.25
The mask applied to aclCurCfgSrcPort for filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

aclCurCfgDstPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.26
The destination TCP/UDP port number to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

aclCurCfgDstPortMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.27
The mask applied to aclCurCfgDstPort for filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

aclCurCfgTCPFlags 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.28
The TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
Status: current Access: read-only
OBJECT-TYPE    
  BITS reserved1(0), reserved2(1), tcpURG(2), tcpACK(3), tcpPSH(4), tcpRST(5), tcpSYN(6), tcpFIN(7)  

aclCurCfgTCPFlagsMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.39
The TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
Status: current Access: read-only
OBJECT-TYPE    
  BITS reserved1(0), reserved2(1), tcpURG(2), tcpACK(3), tcpPSH(4), tcpRST(5), tcpSYN(6), tcpFIN(7)  

aclCurCfgEgressPorts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.29
The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

aclCurCfgStatistics 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.30
Whether statistics collection for this ACL is enabled or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

aclNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2
The table of new ACL configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AclNewCfgEntry

aclNewCfgEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1
New information about a particular ACL configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  AclNewCfgEntry  

aclNewCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.1
The index associated with this ACL entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

aclNewCfgBlock 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.2
The index of the ACL block to which this ACL entry is a member of. A value of zero means the ACL is not a member of any block.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

aclNewCfgGroup 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.3
The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

aclNewCfgFilterAction 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.4
The action to be performed on a packet that matches the filter settings of this ACL entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), permit(1), deny(2), setcos(3)  

aclNewCfgFilterActionSetCOS 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.5
The COS queue to be used when the action for this ACL entry is set to SetCOS.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), cos0(1), cos1(2), cos2(3), cos3(4), cos4(5), cos5(6), cos6(7), cos7(8)  

aclNewCfgEthFmt 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.6
The packet ethernet format to be filtered.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), ethernet2(1), snap(2), llc(3), ieee802dot3(4)  

aclNewCfgTagFmt 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.7
The packet tagging format to be filtered.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), tagged(2)  

aclNewCfgSrcMACAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.9
The source MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

aclNewCfgSrcMACMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.10
The address mask to be applied to aclNewCfgSrcMACAddress for filtering.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

aclNewCfgDstMACAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.11
The destination MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

aclNewCfgDstMACMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.12
The address mask to be applied to aclNewCfgDstMACAddress for filtering.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

aclNewCfgEthernetTypeName 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.13
The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered. If this object is set to a value other than other(7), the value of the aclNewCfgEthernetTypeValue object is automatically set, as follows: aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue none(0) 0 arp(1) 2054 (0x0806) ipv4(2) 2048 (0x0800) ipv6(3) 34525 (0x86dd) mpls(4) 34887 (0x8847) rarp(5) 32821 (0x8035) any(6) 65535 (0xffff)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), arp(1), ipv4(2), ipv6(3), mpls(4), rarp(5), any(6), other(7)  

aclNewCfgEthernetTypeValue 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.14
The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

aclNewCfgVLanId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.15
The virtual LAN identifier to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgVLanMask object, if not yet set, will be automatically set to 4095 (0xfff).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4095  

aclNewCfgVLanMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.16
The mask to be applied to aclNewCfgVLanId for filtering.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

aclNewCfg8021pPriority 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.17
The 802.1p priority to be filtered.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), priority0(1), priority1(2), priority2(3), priority3(4), priority4(5), priority5(6), priority6(7), priority7(8)  

aclNewCfgTypeOfService 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.18
The type of service to be filtered.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

aclNewCfgProtocol 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.19
The protocol to be filtered.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

aclNewCfgSrcIPAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.20
The source IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set, will be automatically set to 255.255.255.255.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

aclNewCfgSrcIPMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.21
The address mask to be applied to aclNewCfgSrcIPAddress for filtering.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

aclNewCfgDstIPAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.22
The destination IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstIPMask object, if not yet set, will be automatically set to 255.255.255.255.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

aclNewCfgDstIPMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.23
The address mask to be applied to aclNewCfgDstIPAddress for filtering.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

aclNewCfgSrcPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.24
The source TCP/UDP port number to be filtered. Whenever this object is set if the aclNewCfgSrcPortMask object is not set will be automatically set to 65535 (0xffff).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

aclNewCfgSrcPortMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.25
The mask to be applied to aclNewCfgSrcPort for filtering.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

aclNewCfgDstPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.26
The destination TCP/UDP port number to be filtered. Whenever this object is set the aclNewCfgSrcPortMask object, if not yet set, will be automatically set to 65535 (0xffff).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

aclNewCfgDstPortMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.27
The mask to be applied to aclNewCfgDstPort for filtering.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

aclNewCfgTCPFlags 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.28
The TCP flags to be filtered. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
Status: current Access: read-write
OBJECT-TYPE    
  BITS reserved1(0), reserved2(1), tcpURG(2), tcpACK(3), tcpPSH(4), tcpRST(5), tcpSYN(6), tcpFIN(7)  

aclNewCfgTCPFlagsMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.39
The TCP flags mask. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; Default value is 0x3f.
Status: current Access: read-write
OBJECT-TYPE    
  BITS reserved1(0), reserved2(1), tcpURG(2), tcpACK(3), tcpPSH(4), tcpRST(5), tcpSYN(6), tcpFIN(7)  

aclNewCfgEgressPorts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.29
The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

aclNewCfgStatistics 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.30
Whether statistics collection for this ACL is enabled or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

aclNewCfgAddEgressPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.31
The port to be added to the specified ACL for egress filtering. A value of zero is always returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

aclNewCfgRemoveEgressPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.32
The port to be removed from the specified ACL. A value of zero is always returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

aclNewCfgDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.33
This is an action object to delete an ACL entry. A value of other(1) is always returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

aclBlockCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.1
The table of current ACL block configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AclBlockCurCfgEntry

aclBlockCurCfgEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.1.1
Current information about a particular ACL block configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  AclBlockCurCfgEntry  

aclBlockCurCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.1.1.1
The index associated with this ACL block entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

aclBlockCurCfgMemberAcls 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.1.1.2
The ACL members of this ACL block, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the block. 0 - the represented ACL is not a member of the block.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

aclBlockNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2
The table of new ACL block configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AclBlockNewCfgEntry

aclBlockNewCfgEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1
New information about a particular ACL block configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  AclBlockNewCfgEntry  

aclBlockNewCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.1
The index associated with this ACL block entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

aclBlockNewCfgMemberAcls 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.2
The ACL members of this ACL block, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the block. 0 - the represented ACL is not a member of the block.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

aclBlockNewCfgAddAcl 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.3
The index of the ACL entry to be added into this ACL block. A successful set operation on this object will also set the bit corresponding to the ACL entry in the aclBlockNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

aclBlockNewCfgRemoveAcl 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.4
The index of the ACL entry to be removed from this ACL block. A successful set operation on this object will unset the bit corresponding to the ACL entry in the aclBlockNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

aclBlockNewCfgDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.5
This is an action object to delete an ACL block. A value of other(1) is always returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

aclGroupCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.1
The table of current ACL Group configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AclGroupCurCfgEntry

aclGroupCurCfgEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.1.1
Information about a particular ACL configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  AclGroupCurCfgEntry  

aclGroupCurCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.1.1.1
The index associated with this ACL Group entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

aclGroupCurCfgMemberAcls 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.1.1.2
The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

aclGroupCurCfgMemberBlocks 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.1.1.3
The ACL block members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL Block 9 || || || ||___ ACL Block 8 || |____ ACL Block 7 || . . . . ||_________ ACL Block 2 |__________ ACL Block 1 where x: 1 - the represented ACL block is a member of the group. 0 - the represented ACL block is not a member of the group.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

aclGroupNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2
The table of new ACL Group configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AclGroupNewCfgEntry

aclGroupNewCfgEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1
New information about a particular ACL configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  AclGroupNewCfgEntry  

aclGroupNewCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.1
The index associated with this ACL Group entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

aclGroupNewCfgMemberAcls 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.2
The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

aclGroupNewCfgMemberBlocks 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.3
The ACL block members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL Block 9 || || || ||___ ACL Block 8 || |____ ACL Block 7 || . . . . ||_________ ACL Block 2 |__________ ACL Block 1 where x: 1 - the represented ACL block is a member of the group. 0 - the represented ACL block is not a member of the group.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

aclGroupNewCfgAddAcl 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.4
The index of the ACL entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

aclGroupNewCfgRemoveAcl 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.5
The index of the ACL entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

aclGroupNewCfgAddBlock 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.6
The index of the ACL block entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL block entry in the aclGroupNewCfgMemberBlocks bitmap. A value of zero is always returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

aclGroupNewCfgRemoveBlock 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.7
The index of the ACL block entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL block entry in the aclGroupNewCfgMemberBlocks bitmap. A value of zero is always returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

aclGroupNewCfgDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.8
This is an action object to delete an ACL group. A value of other(1) is always returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)