BENU-CHASSIS-MIB
File:
BENU-CHASSIS-MIB.mib (29296 bytes)
Imported modules
Imported symbols
Defined Types
BenuCardEntry |
|
SEQUENCE |
|
|
|
|
benuCardIndex |
Unsigned32 |
|
|
benuCardType |
INTEGER |
|
|
benuCardDescr |
DisplayString |
|
|
benuCardSerial |
DisplayString |
|
|
benuCardPartNumber |
DisplayString |
|
|
benuCardHwVersion |
DisplayString |
|
|
benuCardSwVersion |
DisplayString |
|
|
benuCardSlotNumber |
Integer32 |
|
|
benuCardRamSize |
Integer32 |
|
|
benuCardPrimaryDiskSize |
Integer32 |
|
|
benuCardSecondaryDiskSize |
Integer32 |
|
|
benuCardOperStatus |
INTEGER |
|
BenuCardIfIndexEntry |
|
SEQUENCE |
|
|
|
|
benuCardIfIndex |
Unsigned32 |
|
|
benuCardIfName |
DisplayString |
|
|
benuCardIfPortNumber |
Integer32 |
|
|
benuCardIfSlotNumber |
Integer32 |
|
|
benuCardIfLinkUpDownEnable |
INTEGER |
|
|
benuCardIfPortType |
INTEGER |
|
|
benuCardIfBindName |
DisplayString |
|
|
benuCardIfEncapsulation |
DisplayString |
|
|
benuCardIfVirtualType |
INTEGER |
|
BenuSensorEntry |
|
SEQUENCE |
|
|
|
|
benuSensorCardIndex |
Unsigned32 |
|
|
benuSensorIndex |
Unsigned32 |
|
|
benuSensorName |
DisplayString |
|
|
benuSensorType |
INTEGER |
|
|
benuSensorValue |
Integer32 |
|
|
benuSensorMinThresh |
Integer32 |
|
|
benuSensorMaxThresh |
Integer32 |
|
|
benuSensorState |
INTEGER |
|
|
benuSensorId |
Integer32 |
|
BenuFanEntry |
|
SEQUENCE |
|
|
|
|
benuFanCardIndex |
Unsigned32 |
|
|
benuFanMaxSpeed |
Unsigned32 |
|
|
benuFanCurSpeed |
Unsigned32 |
|
|
benuFanStatus |
Integer32 |
|
BenuPowerSupplyEntry |
|
SEQUENCE |
|
|
|
|
benuPowerSupplyIndex |
INTEGER |
|
|
benuPowerSupplyName |
DisplayString |
|
|
benuPowerSupplyPresent |
INTEGER |
|
|
benuPowerSupplyType |
INTEGER |
|
|
benuPowerSupplyPowered |
INTEGER |
|
Defined Values
benuChassisMIB |
1.3.6.1.4.1.39406.1.1 |
Initial creation MIB module for Benu Networks Chassis.
Copyright (C) 2001, 2008 by Benu Networks, Inc.
All rights reserved. |
MODULE-IDENTITY |
|
|
|
benuFanInfo |
1.3.6.1.4.1.39406.1.1.1.6 |
OBJECT IDENTIFIER |
|
|
|
benuChassisType |
1.3.6.1.4.1.39406.1.1.1.1.1 |
Chassis type. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
meg100(1), meg400(2), meg1200(3), meg50(4), xMEG100(5), xMEG10(6) |
|
benuChassisHwVersion |
1.3.6.1.4.1.39406.1.1.1.1.2 |
Chassis hardware revision level, or an empty
string if unavailable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
benuChassisId |
1.3.6.1.4.1.39406.1.1.1.1.3 |
Unique ID string. Defaults to chassis serial
number if available, otherwise empty |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
benuChassisNumOfSlots |
1.3.6.1.4.1.39406.1.1.1.1.4 |
Number of slots in this chassis, or -1
if neither applicable nor determinable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
benuChassisPowerTrapEnable |
1.3.6.1.4.1.39406.1.1.1.1.5 |
This object controls SNMP traps for chassis Power Failure.
If its value is set to enabled(1), then traps
are generated. If the value is disabled(2), then traps
are not generated.
By default, this object has the value enabled(1).
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
benuChassisFanTrapEnable |
1.3.6.1.4.1.39406.1.1.1.1.6 |
This object controls SNMP traps for chassis Fan Failure.
If its value is set to enabled(1), then traps
are generated. If the value is disabled(2), then traps
are not generated.
By default, this object has the value enabled(1).
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
benuChassisSensorTrapEnable |
1.3.6.1.4.1.39406.1.1.1.1.7 |
This object controls SNMP traps for chassis senor Failure.
If its value is set to enabled(1), then traps
are generated. If the value is disabled(2), then traps
are not generated.
By default, this object has the value enabled(1).
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
benuSysUpTimeAtLastChassisChange |
1.3.6.1.4.1.39406.1.1.1.1.8 |
Time (in hundredths of a second) from the last
cold start to the last change in the chassis'
configuration. This value will be updated
whenever the chassis experiences a change
in the count, type, or slot position of
a card in cardTable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
benuCardTable |
1.3.6.1.4.1.39406.1.1.1.2.1 |
Chassis card table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
BenuCardEntry |
|
benuCardEntry |
1.3.6.1.4.1.39406.1.1.1.2.1.1 |
Chassis card table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
BenuCardEntry |
|
|
benuCardIndex |
1.3.6.1.4.1.39406.1.1.1.2.1.1.1 |
Index into cardTable (not physical chassis
slot number). |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..4294967295 |
|
benuCardType |
1.3.6.1.4.1.39406.1.1.1.2.1.1.2 |
Functional type of this card. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(0), rsm(1), switchFabric(2), shelfmgr(3), seFP(4), inputOutputCard(5), switchMesh(6), xmeg(7) |
|
benuCardDescr |
1.3.6.1.4.1.39406.1.1.1.2.1.1.3 |
Text description of this card. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
benuCardSerial |
1.3.6.1.4.1.39406.1.1.1.2.1.1.4 |
The serial number of this card, or zero if
unavailable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
benuCardPartNumber |
1.3.6.1.4.1.39406.1.1.1.2.1.1.5 |
The part number of this card, or an
empty string if unavailable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
benuCardHwVersion |
1.3.6.1.4.1.39406.1.1.1.2.1.1.6 |
Hardware revision level of this card, or an
empty string if unavailable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
benuCardSwVersion |
1.3.6.1.4.1.39406.1.1.1.2.1.1.7 |
Version of the firmware or microcode
installed on this card, or an empty string if
unavailable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
benuCardSlotNumber |
1.3.6.1.4.1.39406.1.1.1.2.1.1.8 |
Slot number relative to the containing card or
chassis, or -1 if neither applicable nor
determinable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
benuCardRamSize |
1.3.6.1.4.1.39406.1.1.1.2.1.1.9 |
Number of kilobytes of DRAM.
A value -1 means not available / not applicable
A value 0 means internal error. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
benuCardPrimaryDiskSize |
1.3.6.1.4.1.39406.1.1.1.2.1.1.10 |
Number of kilobytes of Disk Memory (SATA or Hard Disk).
A value -1 means not available / not applicable.
A value 0 means internal error. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
benuCardSecondaryDiskSize |
1.3.6.1.4.1.39406.1.1.1.2.1.1.11 |
Number of kilobytes of Disk Memory (SATA or Hard Disk).
A value -1 means not available / not applicable.
A value 0 means internal error. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
benuCardOperStatus |
1.3.6.1.4.1.39406.1.1.1.2.1.1.12 |
The operational status of the card.
cardOperStatus is up when a card is
recognized by the device and is enabled for
operation. cardOperStatus is down if the
card is not recognized by the device, or if
it is not enabled for operation.
cardOperStatus is standby if the card is
enabled and acting as a standby slave.
Intermediate stages (rom,flash,diag,boot,config)
are also exposed. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notSpecified(1), up(2), down(3), standby(4), rom(5), flash(6), diag(7), boot(8), config(9) |
|
benuCardIfIndexEntry |
1.3.6.1.4.1.39406.1.1.1.3.1.1 |
Chassis card table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
BenuCardIfIndexEntry |
|
|
benuCardIfIndex |
1.3.6.1.4.1.39406.1.1.1.3.1.1.1 |
matches RFC1213 ifTable IfIndex |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
benuCardIfName |
1.3.6.1.4.1.39406.1.1.1.3.1.1.2 |
matches RFC1213 ifXTable IfName |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
benuCardIfPortNumber |
1.3.6.1.4.1.39406.1.1.1.3.1.1.3 |
Chassis port number, unique per port on a
given card if available. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
benuCardIfSlotNumber |
1.3.6.1.4.1.39406.1.1.1.3.1.1.4 |
Physical slot number of the card in
the Chassis which contains this interface |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
benuCardIfLinkUpDownEnable |
1.3.6.1.4.1.39406.1.1.1.3.1.1.5 |
This enables and disables the sending of
the proprietary notifications 'benuLinkUpTrap'
and 'benuLinkDownTrap' that provide more
information than the standard link up and
link down notifications. By default, these
traps are disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
benuCardIfPortType |
1.3.6.1.4.1.39406.1.1.1.3.1.1.6 |
This object is used to identify port types for
a given card. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(0), ethernet(1), fastEthernet(2), gigaEthernet(3), tunnel(4), ipGre(5), vlan(6), l2tp(7), cable(8), bridge(9), ip(10), multiBind(11), p2p(12), loopback(13), multiBindLastResort(14), lag(15), max(16) |
|
benuCardIfBindName |
1.3.6.1.4.1.39406.1.1.1.3.1.1.7 |
interface name which is bound to this port .
This string will be empty if there is no interface
bind to this port |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
benuCardIfVirtualType |
1.3.6.1.4.1.39406.1.1.1.3.1.1.9 |
This object is used to identify virtualized
interfaces. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
physical(1), virtual(2) |
|
benuSensorEntry |
1.3.6.1.4.1.39406.1.1.1.4.1.1 |
Chassis card table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
BenuSensorEntry |
|
|
benuSensorCardIndex |
1.3.6.1.4.1.39406.1.1.1.4.1.1.1 |
cardIndex of the card in the Chassis cardTable
which contains this sensor. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
benuSensorIndex |
1.3.6.1.4.1.39406.1.1.1.4.1.1.2 |
Index into sensorTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
benuSensorType |
1.3.6.1.4.1.39406.1.1.1.4.1.1.4 |
Type of the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(0), temparature(1), voltage(2), electicCurrent(3), fan(4), power(5) |
|
benuSensorValue |
1.3.6.1.4.1.39406.1.1.1.4.1.1.5 |
Current Value of this sensor.
The unit types for different type of sensors:
temparature -- celcius
Fan -- rpm
Volatage -- volts
Electric Current -- amperes
Power -- watts |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
benuSensorMinThresh |
1.3.6.1.4.1.39406.1.1.1.4.1.1.6 |
Minimum threshold for this sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
benuSensorMaxThresh |
1.3.6.1.4.1.39406.1.1.1.4.1.1.7 |
Maximum threshold for this sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
benuSensorState |
1.3.6.1.4.1.39406.1.1.1.4.1.1.8 |
State of the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(0), normal(1), critical(2) |
|
benuSensorId |
1.3.6.1.4.1.39406.1.1.1.4.1.1.9 |
Unique ID of the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
benuFanTable |
1.3.6.1.4.1.39406.1.1.1.6.1 |
Chassis Fan table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
BenuFanEntry |
|
benuFanEntry |
1.3.6.1.4.1.39406.1.1.1.6.1.1 |
Chassis card table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
BenuFanEntry |
|
|
benuFanCardIndex |
1.3.6.1.4.1.39406.1.1.1.6.1.1.1 |
cardIndex of the card in the Chassis cardTable
which contains this Fan. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
benuFanMaxSpeed |
1.3.6.1.4.1.39406.1.1.1.6.1.1.2 |
Maximum expected speed of each Fan.
This value is applicable to all Fans
in the card.
Units : The value range is from 0 to 100 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
benuFanCurSpeed |
1.3.6.1.4.1.39406.1.1.1.6.1.1.3 |
Current speed of each Fan.
This value is applicable to all Fans
in the card.
Units : The value range is from 0 to 100
and is less than or equal to benuFanMaxSpeed |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
benuFanStatus |
1.3.6.1.4.1.39406.1.1.1.6.1.1.4 |
A value of -1 means Not available / Not applicable.
The lower order 7 bits indicates status of 7 Fans.
A bit value of one indicates FAN is non-operational.
A bit value of zero indicates FAN is operational.
Examples :
(a) Value of 1 ( 0000 0001 ) indicates FAN #1 is
non-operational.
(b) Value of 9 ( 0000 1001 ) indicates FAN #1 and FAN #4
are non-operational.
(c) Value of 73( 0100 1001 ) indicates FAN #1,FAN #4 and FAN #7
are non-operational. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
benuPowerSupplyEntry |
1.3.6.1.4.1.39406.1.1.1.7.1.1 |
Power supply table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
BenuPowerSupplyEntry |
|
|
benuPowerSupplyIndex |
1.3.6.1.4.1.39406.1.1.1.7.1.1.1 |
This object is used to identify the power supply. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
powerA(1), powerB(2) |
|
benuPowerSupplyPresent |
1.3.6.1.4.1.39406.1.1.1.7.1.1.3 |
Indicates whether or not the power supply is installed in the chassis. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
benuPowerSupplyType |
1.3.6.1.4.1.39406.1.1.1.7.1.1.4 |
Indicates the type of the power supply. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ac(1), dc(2), notApplicable(3) |
|
benuPowerSupplyPowered |
1.3.6.1.4.1.39406.1.1.1.7.1.1.5 |
Indicates whether or not the power supply is actively supplying power.
The value of notApplicable(3) will show if the entry for benuPowerSupplyPresent is no(2). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
powered(1), notPowered(2), notApplicable(3) |
|
benuChassisPowerFailureInfo |
1.3.6.1.4.1.39406.1.1.2.1 |
Indicates the location of the Power Failure. |
Status: obsolete |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
powerFailureA(1), powerFailureB(2), powerRestoredA(3), powerRestoredB(4) |
|
benuChassisPowerFailure |
1.3.6.1.4.1.39406.1.1.0.1 |
A chassisPowerFailureTrap is generated when a Power
Failure is detected in the system |
Status: obsolete |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
benuChassisFanFailureTrap |
1.3.6.1.4.1.39406.1.1.0.2 |
A chassisFanFailureTrap is generated when a Fan
Failure is detected in the system |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
benuLinkUpTrap |
1.3.6.1.4.1.39406.1.1.0.3 |
A proprietary Link Up Notification for all
interfaces. This notification contains more details
than the standard 'linkUp' notification in RFC 2863. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
benuLinkDownTrap |
1.3.6.1.4.1.39406.1.1.0.4 |
A proprietary Link Down Notification for all
interfaces. This notification contains more details
than the standard 'linkDown' notification in RFC 2863. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
benuSensorCritical |
1.3.6.1.4.1.39406.1.1.0.5 |
This notification signifies the transition
of the sensor state from normal to critical. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
benuSensorNormal |
1.3.6.1.4.1.39406.1.1.0.6 |
This notification signifies the transition
of the sensor state from critical to normal. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
benuChassisPowerInfo |
1.3.6.1.4.1.39406.1.1.2.4 |
Indicates the location of the Power Failure or recovery. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
powerSupplyA(1), powerSupplyB(2) |
|
benuChassisPowerFault |
1.3.6.1.4.1.39406.1.1.0.7 |
A chassisPowerFaultTrap is generated when a Power
Failure is detected in the system |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
benuChassisPowerRecovery |
1.3.6.1.4.1.39406.1.1.0.8 |
A chassisPowerRecoveryTrap is generated when a failed
Power supply recovery is detected in the system |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
benuChassisPowerPresent |
1.3.6.1.4.1.39406.1.1.0.9 |
A chassisPowerPresentTrap is generated when a
redundant Power supply is inserted in the system |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
benuChassisPowerAbsent |
1.3.6.1.4.1.39406.1.1.0.10 |
A chassisPowerAbsentTrap is generated when a
redundant Power supply is removed from the system |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|