BEGEMOT-WIRELESS-MIB

File: BEGEMOT-WIRELESS-MIB.mib (113772 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	IF-MIB
BEGEMOT-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
Counter32	Integer32	TimeTicks
Unsigned32	mib-2	TEXTUAL-CONVENTION
MacAddress	TruthValue	RowStatus
DisplayString	InterfaceIndex	ifIndex
begemot

Defined Types

WlanMgmtReasonCode
Enumeration of reason and codes used in IEEE802.11 management frames to indicate why an action took place.
TEXTUAL-CONVENTION
	INTEGER	unspecified(1), authenticationExpire(2), authenticationLeave(3), associationExpire(4), associationTooMany(5), notAuthenticated(6), notAssociated(7), associationLeave(8), associationNotAuthenticated(9), dissassocPwrcapBad(10), dissassocSuperchanBad(11), ieInvalid(13), micFailure(14), fourWayHandshakeTimeout(15), groupKeyUpdateTimeout(16), ieIn4FourWayDiffers(17), groupCipherInvalid(18), pairwiseCiherInvalid(19), akmpInvalid(20), unsupportedRsnIeVersion(21), invalidRsnIeCap(22), dot1xAuthFailed(23), cipherSuiteRejected(24), unspeciffiedQos(32), insufficientBw(33), tooManyFrames(34), outsideTxOp(35), leavingQbss(36), badMechanism(37), setupNeeded(38), timeout(39)

WlanMgmtMeshReasonCode
Enumeration of reason and codes used in IEEE802.11 mesh routing management frames to indicate why an action took place.
TEXTUAL-CONVENTION
	INTEGER	peerLinkCancelled(2), maxPeers(3), cpViolation(4), closeRcvd(5), maxRetries(6), confirmTimeout(7), invalidGtk(8), inconsistentParams(9), invalidSecurity(10), perrUnspecified(11), perrNoFI(12), perrDestUnreach(13)

WlanMgmtStatusCode
Enumeration of reason and codes used in IEEE802.11 management frames to indicate what the result of an operation is.
TEXTUAL-CONVENTION
	INTEGER	success(0), unspecified(1), capabilitiesInfo(10), notAssociated(11), other(12), algorithm(13), sequence(14), challenge(15), timeout(16), tooMany(17), basicRate(18), spRequired(19), pbccRequired(20), caRequired(21), specMgmtRequired(22), pwrcapRequire(23), superchanRequired(24), shortSlotRequired(25), dssofdmRequired(26), missingHTCaps(27), invalidIE(40), groupCipherInvalid(41), pairwiseCipherInvalid(42), akmpInvalid(43), unsupportedRsnIEVersion(44), invalidRsnIECap(45), cipherSuiteRejected(46)

WlanRegDomainCode
Enumeration of regdomain codes.
TEXTUAL-CONVENTION
	INTEGER	fcc(1), ca(2), etsi(3), etsi2(4), etsi3(5), fcc3(6), japan(7), korea(8), apac(9), apac2(10), apac3(11), row(12), none(13), debug(14), sr9(15), xr9(16), gz901(17)

WlanIfaceDot11nPduType
Enumeration of values for PDU transmit/receive enabled.
TEXTUAL-CONVENTION
	INTEGER	disabled(0), rxOnly(1), txOnly(2), txAndRx(3)

WlanPeerCapabilityFlags
A list of capability bits that may be advertised by a peer.
TEXTUAL-CONVENTION
	BITS	ess(1), ibss(2), cfPollable(3), cfPollRequest(4), privacy(5), shortPreamble(6), pbcc(7), channelAgility(8), shortSlotTime(9), rsn(10), dsssofdm(11)

WlanIfPhyMode
A list of wireless PHY operating modes.
TEXTUAL-CONVENTION
	INTEGER	auto(1), dot11a(2), dot11b(3), dot11g(4), fh(5), turboA(6), turboG(7), sturboA(8), dot11na(9), dot11ng(10), ofdmHalf(11), ofdmQuarter(12)

WlanInterfaceEntry
SEQUENCE
	wlanIfaceIndex	InterfaceIndex
	wlanIfaceName	DisplayString
	wlanParentIfName	DisplayString
	wlanIfaceOperatingMode	INTEGER
	wlanIfaceFlags	BITS
	wlanIfaceBssid	MacAddress
	wlanIfaceLocalAddress	MacAddress
	wlanIfaceStatus	RowStatus
	wlanIfaceState	INTEGER

WlanIfParentEntry
SEQUENCE
	wlanIfParentDriverCapabilities	BITS
	wlanIfParentCryptoCapabilities	BITS
	wlanIfParentHTCapabilities	BITS

WlanIfaceConfigEntry
SEQUENCE
	wlanIfacePacketBurst	TruthValue
	wlanIfaceCountryCode	OCTET STRING
	wlanIfaceRegDomain	INTEGER
	wlanIfaceDesiredSsid	OCTET STRING
	wlanIfaceDesiredChannel	INTEGER
	wlanIfaceDynamicFreqSelection	TruthValue
	wlanIfaceFastFrames	TruthValue
	wlanIfaceDturbo	TruthValue
	wlanIfaceTxPower	INTEGER
	wlanIfaceFragmentThreshold	INTEGER
	wlanIfaceRTSThreshold	INTEGER
	wlanIfaceWlanPrivacySubscribe	TruthValue
	wlanIfaceBgScan	TruthValue
	wlanIfaceBgScanIdle	INTEGER
	wlanIfaceBgScanInterval	INTEGER
	wlanIfaceBeaconMissedThreshold	INTEGER
	wlanIfaceDesiredBssid	MacAddress
	wlanIfaceRoamingMode	INTEGER
	wlanIfaceDot11d	TruthValue
	wlanIfaceDot11h	TruthValue
	wlanIfaceDynamicWds	TruthValue
	wlanIfacePowerSave	TruthValue
	wlanIfaceApBridge	TruthValue
	wlanIfaceBeaconInterval	INTEGER
	wlanIfaceDtimPeriod	INTEGER
	wlanIfaceHideSsid	TruthValue
	wlanIfaceInactivityProccess	TruthValue
	wlanIfaceDot11gProtMode	INTEGER
	wlanIfaceDot11gPureMode	TruthValue
	wlanIfaceDot11nPureMode	TruthValue
	wlanIfaceDot11nAmpdu	INTEGER
	wlanIfaceDot11nAmpduDensity	INTEGER
	wlanIfaceDot11nAmpduLimit	INTEGER
	wlanIfaceDot11nAmsdu	INTEGER
	wlanIfaceDot11nAmsduLimit	INTEGER
	wlanIfaceDot11nHighThroughput	TruthValue
	wlanIfaceDot11nHTCompatible	TruthValue
	wlanIfaceDot11nHTProtMode	INTEGER
	wlanIfaceDot11nRIFS	TruthValue
	wlanIfaceDot11nShortGI	TruthValue
	wlanIfaceDot11nSMPSMode	INTEGER
	wlanIfaceTdmaSlot	INTEGER
	wlanIfaceTdmaSlotCount	INTEGER
	wlanIfaceTdmaSlotLength	INTEGER
	wlanIfaceTdmaBeaconInterval	INTEGER

WlanIfacePeerEntry
SEQUENCE
	wlanIfacePeerAddress	MacAddress
	wlanIfacePeerAssociationId	INTEGER
	wlanIfacePeerVlanTag	INTEGER
	wlanIfacePeerFrequency	INTEGER
	wlanIfacePeerCurrentTXRate	INTEGER
	wlanIfacePeerRxSignalStrength	INTEGER
	wlanIfacePeerIdleTimer	INTEGER
	wlanIfacePeerTxSequenceNo	INTEGER
	wlanIfacePeerRxSequenceNo	INTEGER
	wlanIfacePeerTxPower	INTEGER
	wlanIfacePeerCapabilities	BITS
	wlanIfacePeerFlags	BITS

WlanIfaceChannelEntry
SEQUENCE
	wlanIfaceChannelId	INTEGER
	wlanIfaceChannelIeeeId	INTEGER
	wlanIfaceChannelType	INTEGER
	wlanIfaceChannelFlags	BITS
	wlanIfaceChannelFrequency	INTEGER
	wlanIfaceChannelMaxRegPower	INTEGER
	wlanIfaceChannelMaxTxPower	INTEGER
	wlanIfaceChannelMinTxPower	INTEGER
	wlanIfaceChannelState	BITS
	wlanIfaceChannelHTExtension	INTEGER
	wlanIfaceChannelMaxAntennaGain	INTEGER

WlanScanConfigEntry
SEQUENCE
	wlanScanFlags	BITS
	wlanScanDuration	INTEGER
	wlanScanMinChannelDwellTime	INTEGER
	wlanScanMaxChannelDwellTime	INTEGER
	wlanScanConfigStatus	INTEGER

WlanScanResultsEntry
SEQUENCE
	wlanScanResultID	OCTET STRING
	wlanScanResultBssid	MacAddress
	wlanScanResultChannel	INTEGER
	wlanScanResultRate	INTEGER
	wlanScanResultNoise	INTEGER
	wlanScanResultBeaconInterval	INTEGER
	wlanScanResultCapabilities	BITS

WlanIfRoamParamsEntry
SEQUENCE
	wlanIfRoamPhyMode	INTEGER
	wlanIfRoamRxSignalStrength	INTEGER
	wlanIfRoamTxRateThreshold	INTEGER

WlanIfTxParamsEntry
SEQUENCE
	wlanIfTxPhyMode	INTEGER
	wlanIfTxUnicastRate	INTEGER
	wlanIfTxMcastRate	INTEGER
	wlanIfTxMgmtRate	INTEGER
	wlanIfTxMaxRetryCount	INTEGER

WlanIfaceStatisticsEntry
SEQUENCE
	wlanStatsRxBadVersion	Counter32
	wlanStatsRxTooShort	Counter32
	wlanStatsRxWrongBssid	Counter32
	wlanStatsRxDiscardedDups	Counter32
	wlanStatsRxWrongDir	Counter32
	wlanStatsRxDiscardMcastEcho	Counter32
	wlanStatsRxDiscardNoAssoc	Counter32
	wlanStatsRxWepNoPrivacy	Counter32
	wlanStatsRxWepUnencrypted	Counter32
	wlanStatsRxWepFailed	Counter32
	wlanStatsRxDecapsulationFailed	Counter32
	wlanStatsRxDiscardMgmt	Counter32
	wlanStatsRxControl	Counter32
	wlanStatsRxBeacon	Counter32
	wlanStatsRxRateSetTooBig	Counter32
	wlanStatsRxElemMissing	Counter32
	wlanStatsRxElemTooBig	Counter32
	wlanStatsRxElemTooSmall	Counter32
	wlanStatsRxElemUnknown	Counter32
	wlanStatsRxChannelMismatch	Counter32
	wlanStatsRxDropped	Counter32
	wlanStatsRxSsidMismatch	Counter32
	wlanStatsRxAuthNotSupported	Counter32
	wlanStatsRxAuthFailed	Counter32
	wlanStatsRxAuthCM	Counter32
	wlanStatsRxAssocWrongBssid	Counter32
	wlanStatsRxAssocNoAuth	Counter32
	wlanStatsRxAssocCapMismatch	Counter32
	wlanStatsRxAssocNoRateMatch	Counter32
	wlanStatsRxBadWpaIE	Counter32
	wlanStatsRxDeauthenticate	Counter32
	wlanStatsRxDisassociate	Counter32
	wlanStatsRxUnknownSubtype	Counter32
	wlanStatsRxFailedNoBuf	Counter32
	wlanStatsRxBadAuthRequest	Counter32
	wlanStatsRxUnAuthorized	Counter32
	wlanStatsRxBadKeyId	Counter32
	wlanStatsRxCCMPSeqViolation	Counter32
	wlanStatsRxCCMPBadFormat	Counter32
	wlanStatsRxCCMPFailedMIC	Counter32
	wlanStatsRxTKIPSeqViolation	Counter32
	wlanStatsRxTKIPBadFormat	Counter32
	wlanStatsRxTKIPFailedMIC	Counter32
	wlanStatsRxTKIPFailedICV	Counter32
	wlanStatsRxDiscardACL	Counter32
	wlanStatsTxFailedNoBuf	Counter32
	wlanStatsTxFailedNoNode	Counter32
	wlanStatsTxUnknownMgmt	Counter32
	wlanStatsTxBadCipher	Counter32
	wlanStatsTxNoDefKey	Counter32
	wlanStatsTxFragmented	Counter32
	wlanStatsTxFragmentsCreated	Counter32
	wlanStatsActiveScans	Counter32
	wlanStatsPassiveScans	Counter32
	wlanStatsTimeoutInactivity	Counter32
	wlanStatsCryptoNoMem	Counter32
	wlanStatsSwCryptoTKIP	Counter32
	wlanStatsSwCryptoTKIPEnMIC	Counter32
	wlanStatsSwCryptoTKIPDeMIC	Counter32
	wlanStatsCryptoTKIPCM	Counter32
	wlanStatsSwCryptoCCMP	Counter32
	wlanStatsSwCryptoWEP	Counter32
	wlanStatsCryptoCipherKeyRejected	Counter32
	wlanStatsCryptoNoKey	Counter32
	wlanStatsCryptoDeleteKeyFailed	Counter32
	wlanStatsCryptoUnknownCipher	Counter32
	wlanStatsCryptoAttachFailed	Counter32
	wlanStatsCryptoKeyFailed	Counter32
	wlanStatsCryptoEnMICFailed	Counter32
	wlanStatsIBSSCapMismatch	Counter32
	wlanStatsUnassocStaPSPoll	Counter32
	wlanStatsBadAidPSPoll	Counter32
	wlanStatsEmptyPSPoll	Counter32
	wlanStatsRxFFBadHdr	Counter32
	wlanStatsRxFFTooShort	Counter32
	wlanStatsRxFFSplitError	Counter32
	wlanStatsRxFFDecap	Counter32
	wlanStatsTxFFEncap	Counter32
	wlanStatsRxBadBintval	Counter32
	wlanStatsRxDemicFailed	Counter32
	wlanStatsRxDefragFailed	Counter32
	wlanStatsRxMgmt	Counter32
	wlanStatsRxActionMgmt	Counter32
	wlanStatsRxAMSDUTooShort	Counter32
	wlanStatsRxAMSDUSplitError	Counter32
	wlanStatsRxAMSDUDecap	Counter32
	wlanStatsTxAMSDUEncap	Counter32
	wlanStatsAMPDUBadBAR	Counter32
	wlanStatsAMPDUOowBar	Counter32
	wlanStatsAMPDUMovedBAR	Counter32
	wlanStatsAMPDURxBAR	Counter32
	wlanStatsAMPDURxOor	Counter32
	wlanStatsAMPDURxCopied	Counter32
	wlanStatsAMPDURxDropped	Counter32
	wlanStatsTxDiscardBadState	Counter32
	wlanStatsTxFailedNoAssoc	Counter32
	wlanStatsTxClassifyFailed	Counter32
	wlanStatsDwdsMcastDiscard	Counter32
	wlanStatsHTAssocRejectNoHT	Counter32
	wlanStatsHTAssocDowngrade	Counter32
	wlanStatsHTAssocRateMismatch	Counter32
	wlanStatsAMPDURxAge	Counter32
	wlanStatsAMPDUMoved	Counter32
	wlanStatsADDBADisabledReject	Counter32
	wlanStatsADDBANoRequest	Counter32
	wlanStatsADDBABadToken	Counter32
	wlanStatsADDBABadPolicy	Counter32
	wlanStatsAMPDUStopped	Counter32
	wlanStatsAMPDUStopFailed	Counter32
	wlanStatsAMPDURxReorder	Counter32
	wlanStatsScansBackground	Counter32
	wlanLastDeauthReason	INTEGER
	wlanLastDissasocReason	INTEGER
	wlanLastAuthFailReason	INTEGER
	wlanStatsBeaconMissedEvents	Counter32
	wlanStatsRxDiscardBadStates	Counter32
	wlanStatsFFFlushed	Counter32
	wlanStatsTxControlFrames	Counter32
	wlanStatsAMPDURexmt	Counter32
	wlanStatsAMPDURexmtFailed	Counter32
	wlanStatsReset	INTEGER

WlanWepInterfaceEntry
SEQUENCE
	wlanWepMode	INTEGER
	wlanWepDefTxKey	INTEGER

WlanWepKeyEntry
SEQUENCE
	wlanWepKeyID	INTEGER
	wlanWepKeyLength	INTEGER
	wlanWepKeySet	OCTET STRING
	wlanWepKeyHash	OCTET STRING
	wlanWepKeyStatus	RowStatus

WlanMACAccessControlEntry
SEQUENCE
	wlanMACAccessControlPolicy	INTEGER
	wlanMACAccessControlNacl	Counter32
	wlanMACAccessControlFlush	INTEGER

WlanMACAccessControlMACEntry
SEQUENCE
	wlanMACAccessControlMAC	MacAddress
	wlanMACAccessControlMACStatus	RowStatus

WlanMeshInterfaceEntry
SEQUENCE
	wlanMeshId	OCTET STRING
	wlanMeshTTL	INTEGER
	wlanMeshPeeringEnabled	TruthValue
	wlanMeshForwardingEnabled	TruthValue
	wlanMeshMetric	INTEGER
	wlanMeshPath	INTEGER
	wlanMeshRoutesFlush	INTEGER

WlanMeshNeighborEntry
SEQUENCE
	wlanMeshNeighborAddress	MacAddress
	wlanMeshNeighborFrequency	INTEGER
	wlanMeshNeighborLocalId	INTEGER
	wlanMeshNeighborPeerId	INTEGER
	wlanMeshNeighborPeerState	INTEGER
	wlanMeshNeighborCurrentTXRate	INTEGER
	wlanMeshNeighborRxSignalStrength	INTEGER
	wlanMeshNeighborIdleTimer	INTEGER
	wlanMeshNeighborTxSequenceNo	INTEGER
	wlanMeshNeighborRxSequenceNo	INTEGER

WlanMeshRouteEntry
SEQUENCE
	wlanMeshRouteDestination	MacAddress
	wlanMeshRouteNextHop	MacAddress
	wlanMeshRouteHops	INTEGER
	wlanMeshRouteMetric	Unsigned32
	wlanMeshRouteLifeTime	Unsigned32
	wlanMeshRouteLastMseq	Unsigned32
	wlanMeshRouteFlags	BITS
	wlanMeshRouteStatus	RowStatus

WlanMeshStatsEntry
SEQUENCE
	wlanMeshDroppedBadSta	Counter32
	wlanMeshDroppedNoLink	Counter32
	wlanMeshNoFwdTtl	Counter32
	wlanMeshNoFwdBuf	Counter32
	wlanMeshNoFwdTooShort	Counter32
	wlanMeshNoFwdDisabled	Counter32
	wlanMeshNoFwdPathUnknown	Counter32
	wlanMeshDroppedBadAE	Counter32
	wlanMeshRouteAddFailed	Counter32
	wlanMeshDroppedNoProxy	Counter32
	wlanMeshDroppedMisaligned	Counter32

WlanHWMPInterfaceEntry
SEQUENCE
	wlanHWMPRootMode	INTEGER
	wlanHWMPMaxHops	INTEGER

WlanMeshHWMPStatsEntry
SEQUENCE
	wlanMeshHWMPWrongSeqNo	Counter32
	wlanMeshHWMPTxRootPREQ	Counter32
	wlanMeshHWMPTxRootRANN	Counter32
	wlanMeshHWMPProxy	Counter32

Defined Values

begemotWlan		1.3.6.1.4.1.12325.1.210
The Begemot MIB for managing IEEE802.11 interfaces.
MODULE-IDENTITY

begemotWlanNotifications		1.3.6.1.4.1.12325.1.210.0
OBJECT IDENTIFIER

begemotWlanInterface		1.3.6.1.4.1.12325.1.210.1
OBJECT IDENTIFIER

begemotWlanScanning		1.3.6.1.4.1.12325.1.210.2
OBJECT IDENTIFIER

begemotWlanStatistics		1.3.6.1.4.1.12325.1.210.3
OBJECT IDENTIFIER

begemotWlanWep		1.3.6.1.4.1.12325.1.210.4
OBJECT IDENTIFIER

begemotWlanMACAccessControl		1.3.6.1.4.1.12325.1.210.5
OBJECT IDENTIFIER

begemotWlanMeshRouting		1.3.6.1.4.1.12325.1.210.6
OBJECT IDENTIFIER

wlanInterfaceTable		1.3.6.1.4.1.12325.1.210.1.1
A table that contains the list of cloned wireless interfaces created on the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanInterfaceEntry

wlanInterfaceEntry		1.3.6.1.4.1.12325.1.210.1.1.1
Information for a cloned wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanInterfaceEntry

wlanIfaceIndex		1.3.6.1.4.1.12325.1.210.1.1.1.1
The ifIndex of this cloned wireless interface.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

wlanIfaceName		1.3.6.1.4.1.12325.1.210.1.1.1.2
The name of this cloned wireless interface.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..32)

wlanParentIfName		1.3.6.1.4.1.12325.1.210.1.1.1.3
The name of this cloned wireless interface's parent hardware interface.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..32)

wlanIfaceOperatingMode		1.3.6.1.4.1.12325.1.210.1.1.1.4
The desired operating mode of the cloned wireless interface.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ibss(0), station(1), wds(2), adhocDemo(3), hostAp(4), monitor(5), meshPoint(6), tdma(7)

wlanIfaceFlags		1.3.6.1.4.1.12325.1.210.1.1.1.5
Flags per cloned wireless interface used during creation.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	uniqueBssid(1), noBeacons(2), wdsLegacy(3)

wlanIfaceBssid		1.3.6.1.4.1.12325.1.210.1.1.1.6
The BSSID assigned to a cloned wireless interface operating in WDS mode.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

wlanIfaceLocalAddress		1.3.6.1.4.1.12325.1.210.1.1.1.7
The unique local MAC address assigned to the cloned wireless interface during creation.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

wlanIfaceStatus		1.3.6.1.4.1.12325.1.210.1.1.1.8
This column allows creation or deletion of cloned wireless interfaces.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

wlanIfaceState		1.3.6.1.4.1.12325.1.210.1.1.1.9
The operating state of the interface.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	up(1), down(2)

wlanIfParentTable		1.3.6.1.4.1.12325.1.210.1.2
A table that contains information about the parent hardware interface of every cloned wireless interface in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanIfParentEntry

wlanIfParentEntry		1.3.6.1.4.1.12325.1.210.1.2.1
Information for the parent hardware interface of a cloned wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanIfParentEntry

wlanIfParentDriverCapabilities		1.3.6.1.4.1.12325.1.210.1.2.1.1
The driver capabilities of this cloned interface's parent.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	station(1), ieee8023encap(2), athFastFrames(3), athTurbo(4), ibss(5), pmgt(6), hostAp(7), ahDemo(8), swRetry(9), txPmgt(10), shortSlot(11), shortPreamble(12), monitor(13), dfs(14), mbss(15), wpa1(16), wpa2(17), burst(18), wme(19), wds(20), bgScan(21), txFrag(22), tdma(23)

wlanIfParentCryptoCapabilities		1.3.6.1.4.1.12325.1.210.1.2.1.2
The hardware cryptographic capabilities of this cloned interface's parent.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	wep(1), tkip(2), aes(3), aesCcm(4), tkipMic(5), ckip(6)

wlanIfParentHTCapabilities		1.3.6.1.4.1.12325.1.210.1.2.1.3
The hardware High Throughput capabilities of this cloned interface's parent.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	ldpc(1), chwidth40(2), greenField(3), shortGi20(4), shortGi40(5), txStbc(6), delba(7), amsdu7935(8), dssscck40(9), psmp(10), fortyMHzIntolerant(11), lsigTxOpProt(12), htcAmpdu(13), htcAmsdu(14), htcHt(15), htcSmps(16), htcRifs(17)

wlanIfaceConfigTable		1.3.6.1.4.1.12325.1.210.1.3
A table that contains a list of configuration parameters per cloned wireless interface. Some of the parameters may not be applicable depending on the underlying device's hardware capabilities and operating mode of the virtual interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanIfaceConfigEntry

wlanIfaceConfigEntry		1.3.6.1.4.1.12325.1.210.1.3.1
A list of configuration parameters for a cloned wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanIfaceConfigEntry

wlanIfacePacketBurst		1.3.6.1.4.1.12325.1.210.1.3.1.1
The value of this object controls whether packet bursting is enabled on the interface.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceCountryCode		1.3.6.1.4.1.12325.1.210.1.3.1.2
The value of this object controls the country regulatory constraints for operation of this wireless interface. The first two octets of this string is the two character country code as described in ISO/IEC 3166-1. The third octet shall contain one of the following: 1. an ASCII space character, if the regulations under which the interface is operating include all environments in the specified country. 2. an ASCII 'O' character, if the country's regulations are for Outdoor environment only. 3. an ASCII 'I' character, if the country's regulations are for Indoor environment only.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wlanIfaceRegDomain		1.3.6.1.4.1.12325.1.210.1.3.1.3
This object specifies the regulatory domain to use when calculating the regulatory constraints for operation of the interface.
Status: current	Access: read-write
OBJECT-TYPE
	WlanRegDomainCode

wlanIfaceDesiredSsid		1.3.6.1.4.1.12325.1.210.1.3.1.4
The desired SSID for the interface as an ASCII string. Specifying an empty string shall remove the current configured SSID.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

wlanIfaceDesiredChannel		1.3.6.1.4.1.12325.1.210.1.3.1.5
The desired operating channel for this interface. The value of this column is the channel index (wlanIfaceChannelId) of the corresponding entry from the wlanIfaceChannelTable. The interface status must be down so that the current operating channel may be set properly.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanIfaceDynamicFreqSelection		1.3.6.1.4.1.12325.1.210.1.3.1.6
The value of this object specifies whether Dynamic Frequency Selection (DFS) as specified in 802.11h is enabled on an interface that supports 802.11h and DFS.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceFastFrames		1.3.6.1.4.1.12325.1.210.1.3.1.7
The value of this object controls whether use of Atheros Fast Frames is enabled when when communicating with another Fast Frames-capable station. The value is only meaningful for interfaces that support Atheros Fast Frames.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceDturbo		1.3.6.1.4.1.12325.1.210.1.3.1.8
The value of this object controls whether use of Atheros Dynamic Turbo mode is enabled when when communicating with another Dynamic Turbo-capable station. The value is only meaningful for interfaces that support Atheros Dynamic Turbo mode.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceTxPower		1.3.6.1.4.1.12325.1.210.1.3.1.9
The value of this object controls the power used to transmit frames. Accepted values are in units of one tenths of a dBm in steps of .5 dBm, e.g setting the value of this object to 155 results in 15.5 dBm transmit power configured on the interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanIfaceFragmentThreshold		1.3.6.1.4.1.12325.1.210.1.3.1.10
The value of this object controls the threshold for which transmitted frames are broken into fragments. Setting the value of this object to 2346 will disable transmit fragmentation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	256..2346

wlanIfaceRTSThreshold		1.3.6.1.4.1.12325.1.210.1.3.1.11
The value of this object controls the threshold for which transmitted frames are preceded by transmission of an RTS control frame. Setting the value of this object to 2346 will disable transmission of RTS frames.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..2346

wlanIfaceWlanPrivacySubscribe		1.3.6.1.4.1.12325.1.210.1.3.1.12
The value of this object specifies whether Wireless Privacy Subscriber support is enabled on the interface.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceBgScan		1.3.6.1.4.1.12325.1.210.1.3.1.13
The value of this object specifies whether background scanning is enabled for an interface operating in station mode.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceBgScanIdle		1.3.6.1.4.1.12325.1.210.1.3.1.14
The value of this object specifies the minimum time a station must be idle before a background scan is initiated on an interface operating in station mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanIfaceBgScanInterval		1.3.6.1.4.1.12325.1.210.1.3.1.15
The value of this object specifies the interval at which background scanning is attempted when operating in station mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanIfaceBeaconMissedThreshold		1.3.6.1.4.1.12325.1.210.1.3.1.16
The value of this object specifies the number of consecutive missed beacons before an interface operating in station mode will attempt to search for a new access point.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

wlanIfaceDesiredBssid		1.3.6.1.4.1.12325.1.210.1.3.1.17
The value of this object specifies the MAC address of the desired access point to use when an interface is operating as a station.
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

wlanIfaceRoamingMode		1.3.6.1.4.1.12325.1.210.1.3.1.18
The value of this object specifies the desired system behavior when the interface is operating as a station and the communication with the current access point is broken.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	device(1), auto(2), manual(3)

wlanIfaceDot11d		1.3.6.1.4.1.12325.1.210.1.3.1.19
The value of this object specifies whether 802.11d specification support is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceDot11h		1.3.6.1.4.1.12325.1.210.1.3.1.20
The value of this object specifies whether 802.11h support including spectrum management is enabled. The value is only meaningfull for interfaces that support 802.11h specification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceDynamicWds		1.3.6.1.4.1.12325.1.210.1.3.1.21
The value of this object specifies whether Dynamic WDS (DWDS) support is enabled. The value is only meaningful for interfaces that support Dynamic WDS.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfacePowerSave		1.3.6.1.4.1.12325.1.210.1.3.1.22
The value of this object specifies whether powersave operation is enabled. The value is only meaningful for interfaces that support powersave operation.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceApBridge		1.3.6.1.4.1.12325.1.210.1.3.1.23
The value of this object specifies whether packets between wireless clients will be passed directly by an interface operating in host ap mode. Disabling it may be useful in situations when traffic between wireless clients needs to be processed with packet filtering.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceBeaconInterval		1.3.6.1.4.1.12325.1.210.1.3.1.24
The value of this object specifies the interval at with beacon frames are sent when an interface is operating in ad-hoc or ap mode. The beacon interval is specified in TU's (1024 usecs).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	25..1000

wlanIfaceDtimPeriod		1.3.6.1.4.1.12325.1.210.1.3.1.25
The value of this object specifies the DTIM period at which buffered multicast data frames are transmitted by an interface operating in host ap mode. Its value indicates the number of beacon intervals between DTIM.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..15

wlanIfaceHideSsid		1.3.6.1.4.1.12325.1.210.1.3.1.26
The value of this object specifies whether broadcasting of the SSID in beacon frames and responding to undirected probe request frames is enabled for an interface operating in ap mode.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceInactivityProccess		1.3.6.1.4.1.12325.1.210.1.3.1.27
The value of this object specifies whether inactivity processing for associated station on an interface operating in ap mode is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceDot11gProtMode		1.3.6.1.4.1.12325.1.210.1.3.1.28
The value of this object specifies the technique used for protecting OFDM frames in a mixed 11b/11g network.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), cts(2), rtscts(3)

wlanIfaceDot11gPureMode		1.3.6.1.4.1.12325.1.210.1.3.1.29
The value of this object specifies whether only 802.11g-capable stations will be allowed to associate to an interface operating as access point in 802.11g mode.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceDot11nPureMode		1.3.6.1.4.1.12325.1.210.1.3.1.30
The value of this object specifies whether only HT-capable stations will be allowed to associate to an interface operating as access point in 802.11n mode.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceDot11nAmpdu		1.3.6.1.4.1.12325.1.210.1.3.1.31
The value of this object specifies whether sending and receiving of AMPDU frames is enabled on an interface operating in 802.11n mode.
Status: current	Access: read-write
OBJECT-TYPE
	WlanIfaceDot11nPduType

wlanIfaceDot11nAmpduDensity		1.3.6.1.4.1.12325.1.210.1.3.1.32
The value of this object specifies the AMPDU density parameter for an interface operating in 802.11n mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0 | 25 | 50 | 100 | 200 | 400 | 800 | 1600

wlanIfaceDot11nAmpduLimit		1.3.6.1.4.1.12325.1.210.1.3.1.33
The value of this object specifies a limit on the AMPDU packet size for receiving AMPDU frames for an interface operating in 802.11n mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	8192 | 16384 | 32768 | 65536

wlanIfaceDot11nAmsdu		1.3.6.1.4.1.12325.1.210.1.3.1.34
The value of this object specifies whether sending and receiving of AMSDU frames is enabled on an interface operating in 802.11n mode.
Status: current	Access: read-write
OBJECT-TYPE
	WlanIfaceDot11nPduType

wlanIfaceDot11nAmsduLimit		1.3.6.1.4.1.12325.1.210.1.3.1.35
The value of this object specifies a limit on the AMSDU packet size when sending and receiving AMSDU frames for an interface operating in 802.11n mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	3839 | 7935

wlanIfaceDot11nHighThroughput		1.3.6.1.4.1.12325.1.210.1.3.1.36
The value of this object specifies whether use of High Throughput (HT) is enabled for an interface operating in 802.11n mode.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceDot11nHTCompatible		1.3.6.1.4.1.12325.1.210.1.3.1.37
The value of this object specifies whether use of compatibility support for pre-802.11n devices is enabled for an interface operating in 802.11n mode.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceDot11nHTProtMode		1.3.6.1.4.1.12325.1.210.1.3.1.38
The value of this object specifies the technique used for protecting HT frames in a mixed legacy/HT network for interfaces operating in 802.11n mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), rts(2)

wlanIfaceDot11nRIFS		1.3.6.1.4.1.12325.1.210.1.3.1.39
The value of this object specifies whether Reduced InterFrame Spacing (RIFS) is enabled for an interface operating in 802.11n mode on an HT channel.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceDot11nShortGI		1.3.6.1.4.1.12325.1.210.1.3.1.40
The value of this object specifies whether use of Short Guard Interval is enabled on an interface operating in 802.11n mode on an HT channel.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanIfaceDot11nSMPSMode		1.3.6.1.4.1.12325.1.210.1.3.1.41
The value of this object specifies whether use of Spatial Multiplexing Power Save (SMPS) is enabled on an interface operating in 802.11n mode and whether SMPS mode is set to Static or Dynamic. The value is only meaningfull for interfaces that support SMPS.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), static(2), dynamic(3)

wlanIfaceTdmaSlot		1.3.6.1.4.1.12325.1.210.1.3.1.42
The value of this object specifies the slot configuration to use when operating in TDMA mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..2

wlanIfaceTdmaSlotCount		1.3.6.1.4.1.12325.1.210.1.3.1.43
The value of this object specifies the number of slots to use to setup a BSS for an interface operating in TDMA mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..2

wlanIfaceTdmaSlotLength		1.3.6.1.4.1.12325.1.210.1.3.1.44
The value of this object specifies a slot length that each station has when a BSS is setup by an interface operating in TDMA mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	150..65000

wlanIfaceTdmaBeaconInterval		1.3.6.1.4.1.12325.1.210.1.3.1.45
The value of this object specifies the number of superframes at which a beacon frame is sent to synchronize the TDMA slot timing for interfaces operating in TDMA mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanIfacePeerTable		1.3.6.1.4.1.12325.1.210.1.4
A table that contains information about the associated stations for an interface operating as an access point, or the stations identified as neighbors in the IBSS for an interface operating in adhoc mode.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanIfacePeerEntry

wlanIfacePeerEntry		1.3.6.1.4.1.12325.1.210.1.4.1
An entry that contains information for the associated stations for an interface operating as an access point, or the neighboring stations of an interface in adhoc mode.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanIfacePeerEntry

wlanIfacePeerAddress		1.3.6.1.4.1.12325.1.210.1.4.1.1
The MAC address of this peer.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

wlanIfacePeerAssociationId		1.3.6.1.4.1.12325.1.210.1.4.1.2
The ID of the associacition with this peer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfacePeerVlanTag		1.3.6.1.4.1.12325.1.210.1.4.1.3
The Vlan Tag for traffic to/from this peer.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..4096

wlanIfacePeerFrequency		1.3.6.1.4.1.12325.1.210.1.4.1.4
The operating frequency for the link with this peer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfacePeerCurrentTXRate		1.3.6.1.4.1.12325.1.210.1.4.1.5
The current transmit rate for this peer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfacePeerRxSignalStrength		1.3.6.1.4.1.12325.1.210.1.4.1.6
The average receive signal strength for this peer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfacePeerIdleTimer		1.3.6.1.4.1.12325.1.210.1.4.1.7
The value of this peer's inactivity timer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfacePeerTxSequenceNo		1.3.6.1.4.1.12325.1.210.1.4.1.8
The last sequence number transmitted to this peer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfacePeerRxSequenceNo		1.3.6.1.4.1.12325.1.210.1.4.1.9
The last sequence number received from this peer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfacePeerTxPower		1.3.6.1.4.1.12325.1.210.1.4.1.10
The transmit power limit for this peer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfacePeerCapabilities		1.3.6.1.4.1.12325.1.210.1.4.1.11
The capabilities advertised by this peer.
Status: current	Access: read-only
OBJECT-TYPE
	WlanPeerCapabilityFlags

wlanIfacePeerFlags		1.3.6.1.4.1.12325.1.210.1.4.1.12
The peer state flags.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	authorizedForData(1), qosEnabled(2), erpEnabled(3), powerSaveMode(4), authRefHeld(5), htEnabled(6), htCompat(7), wpsAssoc(8), tsnAssoc(9), ampduRx(10), ampduTx(11), mimoPowerSave(12), sendRts(13), rifs(14), shortGiHT20(15), shortGiHT40(16), amsduRx(17), amsduTx(18)

wlanIfaceChannelTable		1.3.6.1.4.1.12325.1.210.1.5
A table that contains information about the active channels for the cloned wireless interfaces in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanIfaceChannelEntry

wlanIfaceChannelEntry		1.3.6.1.4.1.12325.1.210.1.5.1
An entry that contains active channel information for the wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanIfaceChannelEntry

wlanIfaceChannelId		1.3.6.1.4.1.12325.1.210.1.5.1.1
The index of this channel entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..1536

wlanIfaceChannelIeeeId		1.3.6.1.4.1.12325.1.210.1.5.1.2
The channel IEEE ID.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..256

wlanIfaceChannelType		1.3.6.1.4.1.12325.1.210.1.5.1.3
The operating channel type for this entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fhss(1), dot11a(2), dot11b(3), dot11g(4), tenMHz(5), fiveMHz(6), turbo(7), ht(8)

wlanIfaceChannelFlags		1.3.6.1.4.1.12325.1.210.1.5.1.4
The channel flags.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	turbo(1), cck(2), ofdm(3), spectrum2Ghz(4), spectrum5Ghz(5), passiveScan(6), dynamicCckOfdm(7), gfsk(8), spectrum900Mhz(9), dot11aStaticTurbo(10), halfRate(11), quarterRate(12), ht20(13), ht40u(14), ht40d(15), dfs(16), xmit4ms(17), noAdhoc(18), noHostAp(19), dot11d(20)

wlanIfaceChannelFrequency		1.3.6.1.4.1.12325.1.210.1.5.1.5
The channel frequency setting in MHz.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfaceChannelMaxRegPower		1.3.6.1.4.1.12325.1.210.1.5.1.6
The maximum regulatory tx power in dBm for this channel.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfaceChannelMaxTxPower		1.3.6.1.4.1.12325.1.210.1.5.1.7
The maximum tx power in units of .5 dBm for this channel.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfaceChannelMinTxPower		1.3.6.1.4.1.12325.1.210.1.5.1.8
The minimum tx power in units of .5 dBm for this channel.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfaceChannelState		1.3.6.1.4.1.12325.1.210.1.5.1.9
The channel dynamic state.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	radar(1), cacDone(2), interferenceDetected(3), radarClear(4)

wlanIfaceChannelHTExtension		1.3.6.1.4.1.12325.1.210.1.5.1.10
The HT40 extension channel number.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfaceChannelMaxAntennaGain		1.3.6.1.4.1.12325.1.210.1.5.1.11
The maximum antenna gain in units of .5 dBm.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanScanConfigTable		1.3.6.1.4.1.12325.1.210.2.1
A table that contains a configuration for channel scanning initiated via SNMP.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanScanConfigEntry

wlanScanConfigEntry		1.3.6.1.4.1.12325.1.210.2.1.1
Per cloned wireless interface channel scan configuration data. The entry will be empty if no scans were initiated via SNMP.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanScanConfigEntry

wlanScanFlags		1.3.6.1.4.1.12325.1.210.2.1.1.1
Desired flags for the channel scan.
Status: current	Access: read-write
OBJECT-TYPE
	BITS	noSelection(1), activeScan(2), pickFirst(3), backgroundScan(4), once(5), noBroadcast(6), noAutoSequencing(7), flushCashe(8), chechCashe(9)

wlanScanDuration		1.3.6.1.4.1.12325.1.210.2.1.1.2
The desired duration of the scan. Setting the value of this object to the highest allowed value will initiate an infinite scan.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..2147483647

wlanScanMinChannelDwellTime		1.3.6.1.4.1.12325.1.210.2.1.1.3
The minimum channel dwelltime for this scan.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanScanMaxChannelDwellTime		1.3.6.1.4.1.12325.1.210.2.1.1.4
The maximum channel dwelltime for this scan.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanScanConfigStatus		1.3.6.1.4.1.12325.1.210.2.1.1.5
This object is used to initiate or cancel channel scanning on the cloned interface via SNMP. Setting its value to running(2) will initiate channel scanning on the cloned interface, while setting the value to cancel will cancel the current ongoing scan. All other values should be returned in GET operations only.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(0), notStarted(1), running(2), finished(3), cancel(4)

wlanScanResultsTable		1.3.6.1.4.1.12325.1.210.2.2
A table that contains scan results for a virtual wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanScanResultsEntry

wlanScanResultsEntry		1.3.6.1.4.1.12325.1.210.2.2.1
Per virtual wireless interface channel scan results data.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanScanResultsEntry

wlanScanResultID		1.3.6.1.4.1.12325.1.210.2.2.1.1
The SSID/MESH ID for this scan result entry.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

wlanScanResultBssid		1.3.6.1.4.1.12325.1.210.2.2.1.2
The BSSID for this scan result entry.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

wlanScanResultChannel		1.3.6.1.4.1.12325.1.210.2.2.1.3
The operating channel for this scan result entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanScanResultRate		1.3.6.1.4.1.12325.1.210.2.2.1.4
The operating rate of this scan result entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanScanResultNoise		1.3.6.1.4.1.12325.1.210.2.2.1.5
The channel noise for this scan result entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanScanResultBeaconInterval		1.3.6.1.4.1.12325.1.210.2.2.1.6
The beacon interval reported for this scan result entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanScanResultCapabilities		1.3.6.1.4.1.12325.1.210.2.2.1.7
The capabilities advertised for this scan result entry.
Status: current	Access: read-only
OBJECT-TYPE
	WlanPeerCapabilityFlags

wlanIfRoamParamsTable		1.3.6.1.4.1.12325.1.210.1.6
A table that contains the parameters that govern the roaming operation on a wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanIfRoamParamsEntry

wlanIfRoamParamsEntry		1.3.6.1.4.1.12325.1.210.1.6.1
An entry that contains the roaming parameters of a wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanIfRoamParamsEntry

wlanIfRoamPhyMode		1.3.6.1.4.1.12325.1.210.1.6.1.1
The PHY mode for this roaming parameters entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanIfPhyMode

wlanIfRoamRxSignalStrength		1.3.6.1.4.1.12325.1.210.1.6.1.2
The Receive Signal Strength for this roaming parameters entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfRoamTxRateThreshold		1.3.6.1.4.1.12325.1.210.1.6.1.3
The transmit rate threshold value for this roaming parameters entry in Mb/s or MCS.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanIfTxParamsTable		1.3.6.1.4.1.12325.1.210.1.7
A table that contains the parameters that govern the transmit operation on a wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanIfTxParamsEntry

wlanIfTxParamsEntry		1.3.6.1.4.1.12325.1.210.1.7.1
An entry that contains the transmit parameters of a wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanIfTxParamsEntry

wlanIfTxPhyMode		1.3.6.1.4.1.12325.1.210.1.7.1.1
The PHY mode for this entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanIfPhyMode

wlanIfTxUnicastRate		1.3.6.1.4.1.12325.1.210.1.7.1.2
The value of this object specifies a fixed rate for transmitting unicast frames in this phy mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanIfTxMcastRate		1.3.6.1.4.1.12325.1.210.1.7.1.3
The value of this object specifies a fixed rate for transmitting broadcast and multicast frames in this phy mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanIfTxMgmtRate		1.3.6.1.4.1.12325.1.210.1.7.1.4
The value of this object specifies a fixed rate for transmitting management and/or control frames in this phy mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanIfTxMaxRetryCount		1.3.6.1.4.1.12325.1.210.1.7.1.5
The maximum number of tries to use when sending unicast frames in this phy mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanIfaceStatisticsTable		1.3.6.1.4.1.12325.1.210.3.1
A table that contains summary statistics for each virtual wireless interface on the managed device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanIfaceStatisticsEntry

wlanIfaceStatisticsEntry		1.3.6.1.4.1.12325.1.210.3.1.1
A list of statistics for each virtual wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanIfaceStatisticsEntry

wlanStatsRxBadVersion		1.3.6.1.4.1.12325.1.210.3.1.1.1
The number of frames received by this interface that had bad version.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxTooShort		1.3.6.1.4.1.12325.1.210.3.1.1.2
The number of frames received by this interface that were too short.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxWrongBssid		1.3.6.1.4.1.12325.1.210.3.1.1.3
The number of frames received by this interface with wrong BSSID.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxDiscardedDups		1.3.6.1.4.1.12325.1.210.3.1.1.4
The number of received discarded duplicate frames by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxWrongDir		1.3.6.1.4.1.12325.1.210.3.1.1.5
The number of received frames by this interface that were dropped due to wrong direction.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxDiscardMcastEcho		1.3.6.1.4.1.12325.1.210.3.1.1.6
The number of received multicast echo frames discarded by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxDiscardNoAssoc		1.3.6.1.4.1.12325.1.210.3.1.1.7
The number of frames received by this interface that were dropped since no association existed with the sending station.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxWepNoPrivacy		1.3.6.1.4.1.12325.1.210.3.1.1.8
The number of frames received by this interface that were dropped since they contained WEP information and WEP privacy was off.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxWepUnencrypted		1.3.6.1.4.1.12325.1.210.3.1.1.9
The number of frames received by this interface that were dropped since they contained no WEP information and WEP privacy was on.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxWepFailed		1.3.6.1.4.1.12325.1.210.3.1.1.10
The number of frames received by this interface that were dropped since processing of the WEP information contained in them failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxDecapsulationFailed		1.3.6.1.4.1.12325.1.210.3.1.1.11
The number of received frames that were discarded by this interface due to decapsulation failure.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxDiscardMgmt		1.3.6.1.4.1.12325.1.210.3.1.1.12
The number of received management frames discarded by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxControl		1.3.6.1.4.1.12325.1.210.3.1.1.13
The number of control frames received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxBeacon		1.3.6.1.4.1.12325.1.210.3.1.1.14
The number of beacon frames received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxRateSetTooBig		1.3.6.1.4.1.12325.1.210.3.1.1.15
The number of frames received by this interface with extended supported rate element.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxElemMissing		1.3.6.1.4.1.12325.1.210.3.1.1.16
The number of frames received by this interface that were missing a required element.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxElemTooBig		1.3.6.1.4.1.12325.1.210.3.1.1.17
The number of frames received by this interface that contained an information element whose size was too big.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxElemTooSmall		1.3.6.1.4.1.12325.1.210.3.1.1.18
The number of frames received by this interface that contained an information element whose size was too small.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxElemUnknown		1.3.6.1.4.1.12325.1.210.3.1.1.19
The number of frames received by this interface that contained an unknown information element.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxChannelMismatch		1.3.6.1.4.1.12325.1.210.3.1.1.20
The number of frames received by this interface, that were discarded since they were received on a channel different from the one indicated in the DS params element id.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxDropped		1.3.6.1.4.1.12325.1.210.3.1.1.21
The number of frames received by this interface that were dropped due to unknown reason.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxSsidMismatch		1.3.6.1.4.1.12325.1.210.3.1.1.22
The number of frames received by this interface that had a bad SSID.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxAuthNotSupported		1.3.6.1.4.1.12325.1.210.3.1.1.23
The number of frames received by this interface that contained an unknown authentication algorithm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxAuthFailed		1.3.6.1.4.1.12325.1.210.3.1.1.24
The number of frames received by this interface for which the authentication failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxAuthCM		1.3.6.1.4.1.12325.1.210.3.1.1.25
The number of frames received by this interface for which the authentication failed due to TKIP countermeasures enabled.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxAssocWrongBssid		1.3.6.1.4.1.12325.1.210.3.1.1.26
The number of frames received by this interface with association request that had a bad BSSID.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxAssocNoAuth		1.3.6.1.4.1.12325.1.210.3.1.1.27
The number of frames received by this interface with association request that came from unauthentication node.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxAssocCapMismatch		1.3.6.1.4.1.12325.1.210.3.1.1.28
The number of frames received by this interface with association request that had bad capabilities set.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxAssocNoRateMatch		1.3.6.1.4.1.12325.1.210.3.1.1.29
The number of frames received by this interface with association request that had unsupported rate set.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxBadWpaIE		1.3.6.1.4.1.12325.1.210.3.1.1.30
The number of frames received by this interface with association request that had no or invalid WPA information element.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxDeauthenticate		1.3.6.1.4.1.12325.1.210.3.1.1.31
The number of deauthentication requests received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxDisassociate		1.3.6.1.4.1.12325.1.210.3.1.1.32
The number of deassociation requests received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxUnknownSubtype		1.3.6.1.4.1.12325.1.210.3.1.1.33
The number of frames received by this interface that had unknown subtype.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxFailedNoBuf		1.3.6.1.4.1.12325.1.210.3.1.1.34
The number of frames received by this interface that were dropped due to lack of free buffers.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxBadAuthRequest		1.3.6.1.4.1.12325.1.210.3.1.1.35
The number of frames received by this interface for which authentication failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxUnAuthorized		1.3.6.1.4.1.12325.1.210.3.1.1.36
The number of non-PAE frames received by this interface prior to authorization.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxBadKeyId		1.3.6.1.4.1.12325.1.210.3.1.1.37
The number of frames received by this interface with bad key.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxCCMPSeqViolation		1.3.6.1.4.1.12325.1.210.3.1.1.38
The number of frames received by this interface that caused CCMP sequence violation.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxCCMPBadFormat		1.3.6.1.4.1.12325.1.210.3.1.1.39
The number of frames received by this interface that had bad CCMP format.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxCCMPFailedMIC		1.3.6.1.4.1.12325.1.210.3.1.1.40
The number of frames receivbed by this interface for which CCMP decryption failed due to MIC mismatch.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxTKIPSeqViolation		1.3.6.1.4.1.12325.1.210.3.1.1.41
The number of frames received by this interface that caused TKIP sequence violation..
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxTKIPBadFormat		1.3.6.1.4.1.12325.1.210.3.1.1.42
The number of frames received by this interface that were missing TKIP ExtIV.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxTKIPFailedMIC		1.3.6.1.4.1.12325.1.210.3.1.1.43
The number of frames received by this interface for which TKIP decryption failed due to MIC mismatch.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxTKIPFailedICV		1.3.6.1.4.1.12325.1.210.3.1.1.44
The number of frames received by this interface for which TKIP decryption failed due to ICV mismatch.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxDiscardACL		1.3.6.1.4.1.12325.1.210.3.1.1.45
The number of frames received by this interface that were disallowed by ACL.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTxFailedNoBuf		1.3.6.1.4.1.12325.1.210.3.1.1.46
The number of frames that were not transmitted by this interface due to lack of free buffers.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTxFailedNoNode		1.3.6.1.4.1.12325.1.210.3.1.1.47
The number of frames that were queued for transmit on this interface but were not sent since appropriate node for sending was not found.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTxUnknownMgmt		1.3.6.1.4.1.12325.1.210.3.1.1.48
The number of unknown management frames transmitted by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTxBadCipher		1.3.6.1.4.1.12325.1.210.3.1.1.49
The number of frames that were queued for transmit on this interface but were not send since the specified key was not setup.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTxNoDefKey		1.3.6.1.4.1.12325.1.210.3.1.1.50
The number of frames that were queued for transmit on this interface but were not send since an appropriate key was not found.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTxFragmented		1.3.6.1.4.1.12325.1.210.3.1.1.51
The number of fragmented frames transmitted by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTxFragmentsCreated		1.3.6.1.4.1.12325.1.210.3.1.1.52
The number of created fragments transmitted by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsActiveScans		1.3.6.1.4.1.12325.1.210.3.1.1.53
The number of active scans performed by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsPassiveScans		1.3.6.1.4.1.12325.1.210.3.1.1.54
The number of passive scans performed by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTimeoutInactivity		1.3.6.1.4.1.12325.1.210.3.1.1.55
The number of times a station/node was dropped by this interface due to inactivity timeout.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsCryptoNoMem		1.3.6.1.4.1.12325.1.210.3.1.1.56
The number times attaching a crypto protocol to this interface failed due to lack of memory.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsSwCryptoTKIP		1.3.6.1.4.1.12325.1.210.3.1.1.57
The number of times TKIP encryption/decryption was handled in software for frames received/transmitted by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsSwCryptoTKIPEnMIC		1.3.6.1.4.1.12325.1.210.3.1.1.58
The number of times TKIP MIC was added in software to frames transmitted by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsSwCryptoTKIPDeMIC		1.3.6.1.4.1.12325.1.210.3.1.1.59
The number of times TKIP MIC was stripped in software from frames received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsCryptoTKIPCM		1.3.6.1.4.1.12325.1.210.3.1.1.60
The number of frames discarded by this interface due to TKIP counter measures.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsSwCryptoCCMP		1.3.6.1.4.1.12325.1.210.3.1.1.61
The number of times CCMP encryption/decryption was handled in software for frames received/transmitted by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsSwCryptoWEP		1.3.6.1.4.1.12325.1.210.3.1.1.62
The number of times WEP encryption/decryption was handled in software for frames received/transmitted by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsCryptoCipherKeyRejected		1.3.6.1.4.1.12325.1.210.3.1.1.63
The number of times a key was rejected for this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsCryptoNoKey		1.3.6.1.4.1.12325.1.210.3.1.1.64
The number of times key setup for this interface failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsCryptoDeleteKeyFailed		1.3.6.1.4.1.12325.1.210.3.1.1.65
The number of times key deletion from driver for this interface failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsCryptoUnknownCipher		1.3.6.1.4.1.12325.1.210.3.1.1.66
The number of times key setup for this interface failed due to invalid cipher.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsCryptoAttachFailed		1.3.6.1.4.1.12325.1.210.3.1.1.67
The number of times attaching a cipher for this interface failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsCryptoKeyFailed		1.3.6.1.4.1.12325.1.210.3.1.1.68
The number of times setting a cipher in the driver for this interface failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsCryptoEnMICFailed		1.3.6.1.4.1.12325.1.210.3.1.1.69
The number of frames that were discarded by by this interface due to failed enmic.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsIBSSCapMismatch		1.3.6.1.4.1.12325.1.210.3.1.1.70
The number of times a BSSID change failed for an interface operating in ad hoc mode due to capabilities mismatch.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsUnassocStaPSPoll		1.3.6.1.4.1.12325.1.210.3.1.1.71
The number of ps-poll frames from unassociated station received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsBadAidPSPoll		1.3.6.1.4.1.12325.1.210.3.1.1.72
The number of ps-poll frames with incorrect aid received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsEmptyPSPoll		1.3.6.1.4.1.12325.1.210.3.1.1.73
The number of empty ps-poll frames received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxFFBadHdr		1.3.6.1.4.1.12325.1.210.3.1.1.74
The number of fast frames with bad header received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxFFTooShort		1.3.6.1.4.1.12325.1.210.3.1.1.75
The number of fast frames received by this interface, for which decapsulation failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxFFSplitError		1.3.6.1.4.1.12325.1.210.3.1.1.76
The number of fast frames received by this interface, for which decapsulation failed during split.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxFFDecap		1.3.6.1.4.1.12325.1.210.3.1.1.77
The number of fast frames received by this interface, that were successfully decapsulated.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTxFFEncap		1.3.6.1.4.1.12325.1.210.3.1.1.78
The number of encapsulated fast frames transmitted by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxBadBintval		1.3.6.1.4.1.12325.1.210.3.1.1.79
The number of frames with bogus beacon interval received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxDemicFailed		1.3.6.1.4.1.12325.1.210.3.1.1.80
The number of frames received by this interface for which stripping of the MIC failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxDefragFailed		1.3.6.1.4.1.12325.1.210.3.1.1.81
The number of frames received by this interface for which defragmentation failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxMgmt		1.3.6.1.4.1.12325.1.210.3.1.1.82
The number of management frames received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxActionMgmt		1.3.6.1.4.1.12325.1.210.3.1.1.83
The number of action management frames received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxAMSDUTooShort		1.3.6.1.4.1.12325.1.210.3.1.1.84
The number of A-MSDU frames received by this interface for which decapsulaiton failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxAMSDUSplitError		1.3.6.1.4.1.12325.1.210.3.1.1.85
The number of A-MSDU frames received by this interface for which split failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxAMSDUDecap		1.3.6.1.4.1.12325.1.210.3.1.1.86
The number of A-MSDU frames received by this interface which were successfully decapsulaited.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTxAMSDUEncap		1.3.6.1.4.1.12325.1.210.3.1.1.87
The number of encapsulated A-MSDU frames transmitted by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDUBadBAR		1.3.6.1.4.1.12325.1.210.3.1.1.88
The number of A-MPDU frames that were dropped by this interface source BAR frame processing was disabled.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDUOowBar		1.3.6.1.4.1.12325.1.210.3.1.1.89
The number of A-MPDU BAR before ADDBA frames received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDUMovedBAR		1.3.6.1.4.1.12325.1.210.3.1.1.90
The number of times a BAR moved window occurred.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDURxBAR		1.3.6.1.4.1.12325.1.210.3.1.1.91
The number of A-MPDU BAR frames received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDURxOor		1.3.6.1.4.1.12325.1.210.3.1.1.92
The number of out-of-order A-MPDU frames by received this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDURxCopied		1.3.6.1.4.1.12325.1.210.3.1.1.93
The number of A-MPDU frames by copied down this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDURxDropped		1.3.6.1.4.1.12325.1.210.3.1.1.94
The number of A-MPDU frames by dropped this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTxDiscardBadState		1.3.6.1.4.1.12325.1.210.3.1.1.95
The number of frames queued for transmit on this interface that were discarded due to interface state not ready for transmit.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTxFailedNoAssoc		1.3.6.1.4.1.12325.1.210.3.1.1.96
The number of frames queued for transmit on this interface that were discarded since the receiving station was not associated.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTxClassifyFailed		1.3.6.1.4.1.12325.1.210.3.1.1.97
The number of frames queued for transmit on this interface that were discarded since their priority was not determined.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsDwdsMcastDiscard		1.3.6.1.4.1.12325.1.210.3.1.1.98
The number of multicast over DWDS frames discarded by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsHTAssocRejectNoHT		1.3.6.1.4.1.12325.1.210.3.1.1.99
The number of management frames received from a non-HT stations that were rejected by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsHTAssocDowngrade		1.3.6.1.4.1.12325.1.210.3.1.1.100
The number of times HT was disallowed for an association on this interface due to WEP or TKIP requested.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsHTAssocRateMismatch		1.3.6.1.4.1.12325.1.210.3.1.1.101
The number of times rate mismatch occurred during HT rate set handling on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDURxAge		1.3.6.1.4.1.12325.1.210.3.1.1.102
The number of A-MPDU frames sent by this interface due to aging out.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDUMoved		1.3.6.1.4.1.12325.1.210.3.1.1.103
The number of time A-MPDU MSDU moved window occurred for this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsADDBADisabledReject		1.3.6.1.4.1.12325.1.210.3.1.1.104
The number of received ADDBA frames that were discarded by this interface since ADDBA was disabled.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsADDBANoRequest		1.3.6.1.4.1.12325.1.210.3.1.1.105
The number of received ADDBA responses frames that were discarded by this interface due to no pending ADDBA.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsADDBABadToken		1.3.6.1.4.1.12325.1.210.3.1.1.106
The number of received ADDBA response frames that were discarded by this interface since ADDBA response caused dialogtoken mismatch.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsADDBABadPolicy		1.3.6.1.4.1.12325.1.210.3.1.1.107
The number of received ADDBA response frames that were discarded by this interface since ADDBA response caused policy mismatch.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDUStopped		1.3.6.1.4.1.12325.1.210.3.1.1.108
The number of times a A-MPDU stream stopped on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDUStopFailed		1.3.6.1.4.1.12325.1.210.3.1.1.109
The number of times a A-MPDU stream stop failed on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDURxReorder		1.3.6.1.4.1.12325.1.210.3.1.1.110
The number of received reordered A-MPDU frames on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsScansBackground		1.3.6.1.4.1.12325.1.210.3.1.1.111
The number of background scans started on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanLastDeauthReason		1.3.6.1.4.1.12325.1.210.3.1.1.112
The last received deauthenticate reason on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	WlanMgmtReasonCode

wlanLastDissasocReason		1.3.6.1.4.1.12325.1.210.3.1.1.113
The last received disassociate reason on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	WlanMgmtReasonCode

wlanLastAuthFailReason		1.3.6.1.4.1.12325.1.210.3.1.1.114
The last received authentication failed reason on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	WlanMgmtReasonCode

wlanStatsBeaconMissedEvents		1.3.6.1.4.1.12325.1.210.3.1.1.115
The number of beacon miss notification events on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsRxDiscardBadStates		1.3.6.1.4.1.12325.1.210.3.1.1.116
The number of frames received on this interface that were discarded due to interface state not ready for receive.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsFFFlushed		1.3.6.1.4.1.12325.1.210.3.1.1.117
The number of fast frames flushed from the stage queue on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsTxControlFrames		1.3.6.1.4.1.12325.1.210.3.1.1.118
The number of control frames transmitted by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDURexmt		1.3.6.1.4.1.12325.1.210.3.1.1.119
The number of A-MPDU frames successfully retransmitted by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsAMPDURexmtFailed		1.3.6.1.4.1.12325.1.210.3.1.1.120
The number of A-MPDU frames for which retransmission failed on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanStatsReset		1.3.6.1.4.1.12325.1.210.3.1.1.121
The value of this object is used to reset the statistics on this interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	no-op(1), clear(2)

wlanWepInterfaceTable		1.3.6.1.4.1.12325.1.210.4.1
A table that contains WEP configuration for the wireless interfaces on the managed system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanWepInterfaceEntry

wlanWepInterfaceEntry		1.3.6.1.4.1.12325.1.210.4.1.1
WEP Configuration for wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanWepInterfaceEntry

wlanWepMode		1.3.6.1.4.1.12325.1.210.4.1.1.1
The WEP mode set on the interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	off(0), on(1), mixed(2)

wlanWepDefTxKey		1.3.6.1.4.1.12325.1.210.4.1.1.2
The index of the default WEP key for the interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanWepKeyTable		1.3.6.1.4.1.12325.1.210.4.2
A table that contains the configured WEP keys for a virtual wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanWepKeyEntry

wlanWepKeyEntry		1.3.6.1.4.1.12325.1.210.4.2.1
A configured WEP Key entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanWepKeyEntry

wlanWepKeyID		1.3.6.1.4.1.12325.1.210.4.2.1.1
The WEP Key ID.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..4

wlanWepKeyLength		1.3.6.1.4.1.12325.1.210.4.2.1.2
The WEP Key length.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanWepKeySet		1.3.6.1.4.1.12325.1.210.4.2.1.3
The WEP Key String to configure for this key. When GET is attempted for this column, an empty Octet String is returned.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

wlanWepKeyHash		1.3.6.1.4.1.12325.1.210.4.2.1.4
The SHA256 hash produced of the WEP Key String.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wlanWepKeyStatus		1.3.6.1.4.1.12325.1.210.4.2.1.5
This object is used for creating/deleting WEP keys.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

wlanMACAccessControlTable		1.3.6.1.4.1.12325.1.210.5.1
A table that contains Access Control configuration for wireless interfaces operating as an access point.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanMACAccessControlEntry

wlanMACAccessControlEntry		1.3.6.1.4.1.12325.1.210.5.1.1
The MAC Access Control configuration for a wireless interface operating as an access point.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanMACAccessControlEntry

wlanMACAccessControlPolicy		1.3.6.1.4.1.12325.1.210.5.1.1.1
The value of this object specifies the MAC Access Control policy for this Host AP interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	open(0), allow(1), deny(2), radius(7)

wlanMACAccessControlNacl		1.3.6.1.4.1.12325.1.210.5.1.1.2
The number of active MAC Access Control Entries in the Database for this Host AP interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMACAccessControlFlush		1.3.6.1.4.1.12325.1.210.5.1.1.3
This object is used to flush all entries from the MAC Access Control Database for the specified virtual wireless interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	no-op(0), flush(1)

wlanMACAccessControlMACTable		1.3.6.1.4.1.12325.1.210.5.2
A table that contains Access Control MAC for virtual wireless interfaces operating in Host AP mode.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanMACAccessControlMACEntry

wlanMACAccessControlMACEntry		1.3.6.1.4.1.12325.1.210.5.2.1
The MAC Access Control configuration database with MAC addresses for a virtual wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanMACAccessControlMACEntry

wlanMACAccessControlMAC		1.3.6.1.4.1.12325.1.210.5.2.1.1
The value of this object specifies the station's MAC to which the Access Control policy will be applied.
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

wlanMACAccessControlMACStatus		1.3.6.1.4.1.12325.1.210.5.2.1.2
The object is used to add or delete MAC entries from the Access Control Database for this interface operating in Host AP mode. To add an entry the value of this object should be set to createAndGo, a value of destroy will remove an existing entry. A GET on this object will always return value active.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

wlanMeshRoutingConfig		1.3.6.1.4.1.12325.1.210.6.1
OBJECT IDENTIFIER

wlanMeshInterface		1.3.6.1.4.1.12325.1.210.6.2
OBJECT IDENTIFIER

wlanMeshRoute		1.3.6.1.4.1.12325.1.210.6.3
OBJECT IDENTIFIER

wlanMeshStatistics		1.3.6.1.4.1.12325.1.210.6.4
OBJECT IDENTIFIER

wlanMeshRouteProtocols		1.3.6.1.4.1.12325.1.210.6.5
OBJECT IDENTIFIER

wlanMeshMaxRetries		1.3.6.1.4.1.12325.1.210.6.1.1
Maximum retries during peer link establishment for wireless mesh routing operation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanMeshConfirmTimeout		1.3.6.1.4.1.12325.1.210.6.1.2
Confirm state timeout for wireless mesh routing operation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanMeshHoldingTimeout		1.3.6.1.4.1.12325.1.210.6.1.3
Holding state timeout for wireless mesh routing operation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanMeshRetryTimeout		1.3.6.1.4.1.12325.1.210.6.1.4
Retry timeout for wireless mesh routing operation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanMeshInterfaceTable		1.3.6.1.4.1.12325.1.210.6.2.1
A table that contains information for wireless interfaces operating as wireless mesh points.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanMeshInterfaceEntry

wlanMeshInterfaceEntry		1.3.6.1.4.1.12325.1.210.6.2.1.1
Wireless Mesh Routing information for an interface operating as mesh point.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanMeshInterfaceEntry

wlanMeshId		1.3.6.1.4.1.12325.1.210.6.2.1.1.1
The desired Mesh Identifier for the interface.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..32)

wlanMeshTTL		1.3.6.1.4.1.12325.1.210.6.2.1.1.2
The number of hops a packet may be forwarded before it is discarded.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanMeshPeeringEnabled		1.3.6.1.4.1.12325.1.210.6.2.1.1.3
Enable or disable peering with neighbor mesh stations for this interface.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanMeshForwardingEnabled		1.3.6.1.4.1.12325.1.210.6.2.1.1.4
Enable or disable forwarding packets by this interface.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanMeshMetric		1.3.6.1.4.1.12325.1.210.6.2.1.1.5
The link metric protocol used by the interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(0), airtime(1)

wlanMeshPath		1.3.6.1.4.1.12325.1.210.6.2.1.1.6
The path selection protocol used by the interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(0), hwmp(1)

wlanMeshRoutesFlush		1.3.6.1.4.1.12325.1.210.6.2.1.1.7
This object is used to flush all mesh route entries from the mesh routing table for the specified interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	no-op(0), flush(1)

wlanMeshNeighborTable		1.3.6.1.4.1.12325.1.210.6.2.2
A table that contains information for the neighbors of wireless interfaces operating in mesh mode.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanMeshNeighborEntry

wlanMeshNeighborEntry		1.3.6.1.4.1.12325.1.210.6.2.2.1
Information for all neighbors of a wireless interface operating as a mesh point.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanMeshNeighborEntry

wlanMeshNeighborAddress		1.3.6.1.4.1.12325.1.210.6.2.2.1.1
The Ethernet address of this neighbor.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

wlanMeshNeighborFrequency		1.3.6.1.4.1.12325.1.210.6.2.2.1.2
The operating frequency for the link with this neighbor.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanMeshNeighborLocalId		1.3.6.1.4.1.12325.1.210.6.2.2.1.3
The local mesh id for this neighbor.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanMeshNeighborPeerId		1.3.6.1.4.1.12325.1.210.6.2.2.1.4
The mesh peer id of this neighbor.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanMeshNeighborPeerState		1.3.6.1.4.1.12325.1.210.6.2.2.1.5
The current link state for this neighbor.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	idle(0), openTx(1), openRx(2), confirmRx(3), established(4), closing(5)

wlanMeshNeighborCurrentTXRate		1.3.6.1.4.1.12325.1.210.6.2.2.1.6
The current transmit rate for this neighbor.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanMeshNeighborRxSignalStrength		1.3.6.1.4.1.12325.1.210.6.2.2.1.7
The average receive signal strength for this neighbor.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanMeshNeighborIdleTimer		1.3.6.1.4.1.12325.1.210.6.2.2.1.8
The value of this neighbor's inactivity timer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanMeshNeighborTxSequenceNo		1.3.6.1.4.1.12325.1.210.6.2.2.1.9
The last sequence number transmitted to this neighbor.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanMeshNeighborRxSequenceNo		1.3.6.1.4.1.12325.1.210.6.2.2.1.10
The last sequence number received from this neighbor.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanMeshRouteTable		1.3.6.1.4.1.12325.1.210.6.3.1
A table that contains the mesh routing table for interfaces operating as mesh points, used for forwarding packets on a mesh network.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanMeshRouteEntry

wlanMeshRouteEntry		1.3.6.1.4.1.12325.1.210.6.3.1.1
Wireless Mesh Routing Table entries for virtual wireless interfaces.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanMeshRouteEntry

wlanMeshRouteDestination		1.3.6.1.4.1.12325.1.210.6.3.1.1.1
The mesh route entry's destination address.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

wlanMeshRouteNextHop		1.3.6.1.4.1.12325.1.210.6.3.1.1.2
The mesh route entry's next hop address.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

wlanMeshRouteHops		1.3.6.1.4.1.12325.1.210.6.3.1.1.3
The number of hops for this mesh route entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

wlanMeshRouteMetric		1.3.6.1.4.1.12325.1.210.6.3.1.1.4
The metric of this mesh route entry.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wlanMeshRouteLifeTime		1.3.6.1.4.1.12325.1.210.6.3.1.1.5
The life time of this mesh route entry.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wlanMeshRouteLastMseq		1.3.6.1.4.1.12325.1.210.6.3.1.1.6
The last sequence number seen from this destination.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wlanMeshRouteFlags		1.3.6.1.4.1.12325.1.210.6.3.1.1.7
The Mesh Route entry's flags.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	valid(1), proxy(2)

wlanMeshRouteStatus		1.3.6.1.4.1.12325.1.210.6.3.1.1.8
The object is used to add or delete entries from the mesh routing table for the virtual wireless interface.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

wlanMeshStatsTable		1.3.6.1.4.1.12325.1.210.6.4.1
A table that contains summary statistics for each virtual wireless interface operating as mesh point.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanMeshStatsEntry

wlanMeshStatsEntry		1.3.6.1.4.1.12325.1.210.6.4.1.1
A list of statistics for each virtual wireless interface operating as mesh point.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanMeshStatsEntry

wlanMeshDroppedBadSta		1.3.6.1.4.1.12325.1.210.6.4.1.1.1
The number of frames dropped by this interface since they were received from a non-mesh station.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshDroppedNoLink		1.3.6.1.4.1.12325.1.210.6.4.1.1.2
The number of frames dropped by this interface since no link had been established.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshNoFwdTtl		1.3.6.1.4.1.12325.1.210.6.4.1.1.3
The number of frames that were not forwarded by this interface because of a zero TTL.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshNoFwdBuf		1.3.6.1.4.1.12325.1.210.6.4.1.1.4
The number of frames that were not forwarded by this interface due to lack of free buffers.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshNoFwdTooShort		1.3.6.1.4.1.12325.1.210.6.4.1.1.5
The number of frames that were not forwarded by this interface due to missing headers.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshNoFwdDisabled		1.3.6.1.4.1.12325.1.210.6.4.1.1.6
The number of frames that were not forwarded by this interface since forwarding was disabled.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshNoFwdPathUnknown		1.3.6.1.4.1.12325.1.210.6.4.1.1.7
The number of frames that were not forwarded by this interface since the path was unknown.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshDroppedBadAE		1.3.6.1.4.1.12325.1.210.6.4.1.1.8
The number of frames that were dropped by this interface since the AE was invalid.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshRouteAddFailed		1.3.6.1.4.1.12325.1.210.6.4.1.1.9
The number of times an addition of a route to the mesh routing table for this interface failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshDroppedNoProxy		1.3.6.1.4.1.12325.1.210.6.4.1.1.10
The number of frames that were dropped by this interface since proxying was not enabled on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshDroppedMisaligned		1.3.6.1.4.1.12325.1.210.6.4.1.1.11
The number of frames that were dropped by this interface due to bad alignment.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshProtoHWMP		1.3.6.1.4.1.12325.1.210.6.5.1
OBJECT IDENTIFIER

wlanMeshHWMPConfig		1.3.6.1.4.1.12325.1.210.6.5.1.1
OBJECT IDENTIFIER

wlanMeshHWMPInterface		1.3.6.1.4.1.12325.1.210.6.5.1.2
OBJECT IDENTIFIER

wlanMeshHWMPStatistics		1.3.6.1.4.1.12325.1.210.6.5.1.3
OBJECT IDENTIFIER

wlanHWMPRouteInactiveTimeout		1.3.6.1.4.1.12325.1.210.6.5.1.1.1
The HWMP Route inactivity timeout.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanHWMPRootAnnounceInterval		1.3.6.1.4.1.12325.1.210.6.5.1.1.2
The HWMP Root Announcement interval.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanHWMPRootInterval		1.3.6.1.4.1.12325.1.210.6.5.1.1.3
The HWMP Root interval.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanHWMPRootTimeout		1.3.6.1.4.1.12325.1.210.6.5.1.1.4
The root PREQ timeout.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanHWMPPathLifetime		1.3.6.1.4.1.12325.1.210.6.5.1.1.5
The HWMP path entry lifetime.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanHWMPReplyForwardBit		1.3.6.1.4.1.12325.1.210.6.5.1.1.6
A non-zero value for this object specifies that RF bit shall be set on generated PREQs.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanHWMPTargetOnlyBit		1.3.6.1.4.1.12325.1.210.6.5.1.1.7
A non-zero value for this object specifies that TO bit shall be set on generated PREQs.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanHWMPInterfaceTable		1.3.6.1.4.1.12325.1.210.6.5.1.2.1
A table that contains information for wireless interfaces operating in mesh mode.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanHWMPInterfaceEntry

wlanHWMPInterfaceEntry		1.3.6.1.4.1.12325.1.210.6.5.1.2.1.1
Wireless Mesh Routing HWMP information for a wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanHWMPInterfaceEntry

wlanHWMPRootMode		1.3.6.1.4.1.12325.1.210.6.5.1.2.1.1.1
This object is used to configure whether the interface will operate as root node and specify root node mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), normal(2), proactive(3), rann(4)

wlanHWMPMaxHops		1.3.6.1.4.1.12325.1.210.6.5.1.2.1.1.2
The maximum number of hops allowed on an HMWP path for this interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

wlanMeshHWMPStatsTable		1.3.6.1.4.1.12325.1.210.6.5.1.3.1
A table that contains summary statistics for HWMP operation on an interface operating as mesh point.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanMeshHWMPStatsEntry

wlanMeshHWMPStatsEntry		1.3.6.1.4.1.12325.1.210.6.5.1.3.1.1
A list of HWMP statistics for each wlan interface operating as HWMP mesh point.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanMeshHWMPStatsEntry

wlanMeshHWMPWrongSeqNo		1.3.6.1.4.1.12325.1.210.6.5.1.3.1.1.1
The number of HWMP frames with wrong sequence number received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshHWMPTxRootPREQ		1.3.6.1.4.1.12325.1.210.6.5.1.3.1.1.2
The number of HWMP Root PREQ frames sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshHWMPTxRootRANN		1.3.6.1.4.1.12325.1.210.6.5.1.3.1.1.3
The number of HWMP Root RANN frames sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wlanMeshHWMPProxy		1.3.6.1.4.1.12325.1.210.6.5.1.3.1.1.4
The number of HWMP PREP frames discarded by this interface due to the HWMP route being marked as proxy.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32