BCAM-MIB

File: BCAM-MIB.mib (196914 bytes)

Imported modules

SNMPv2-TC RFC1155-SMI RFC-1212
RFC-1215

Imported symbols

DisplayString mgmt NetworkAddress
IpAddress Counter Gauge
TimeTicks enterprises OBJECT-TYPE
TRAP-TYPE

Defined Types

PhysAddress  
OCTET STRING    

TsapEntry  
SEQUENCE    
  bcamTsapTabNumbers Counter
  bcamTsapTabState INTEGER
  bcamTsapTabDuration Gauge
  bcamTsapTabDateApplEnable DisplayString Size(8)
  bcamTsapTabTimeApplEnable DisplayString Size(6)
  bcamTsapTabTypName INTEGER
  bcamTsapTabName DisplayString Size(0..78)
  bcamTsapTabPortnumber INTEGER 0..65535
  bcamTsapTabOsiTsel OCTET STRING Size(0..32)
  bcamTsapTabNeaTsel OCTET STRING Size(8)
  bcamTsapTabHost DisplayString Size(8)
  bcamTsapTabDiagnostic OCTET STRING Size(4)
  bcamTsapTabTsduSends Counter
  bcamTsapTabByteSends Counter
  bcamTsapTabTsduReceiveds Counter
  bcamTsapTabByteReceiveds Counter
  bcamTsapTabSendCallOverMaxs Counter
  bcamTsapTabLetterTimeouts Counter
  bcamTsapTabInWaitBuck1Hist INTEGER 0..65535
  bcamTsapTabInWaitBuck2Hist INTEGER 0..65535
  bcamTsapTabInWaitBuck3Hist INTEGER 0..65535
  bcamTsapTabInWaitBuck4Hist INTEGER 0..65535
  bcamTsapTabInWaitBuck5Hist INTEGER 0..65535
  bcamTsapTabReactBuck1Hist INTEGER 0..65535
  bcamTsapTabReactBuck2Hist INTEGER 0..65535
  bcamTsapTabReactBuck3Hist INTEGER 0..65535
  bcamTsapTabReactBuck4Hist INTEGER 0..65535
  bcamTsapTabReactBuck5Hist INTEGER 0..65535
  bcamTsapTabInWaitBuck1 INTEGER 0..65535
  bcamTsapTabInWaitBuck2 INTEGER 0..65535
  bcamTsapTabInWaitBuck3 INTEGER 0..65535
  bcamTsapTabInWaitBuck4 INTEGER 0..65535
  bcamTsapTabInWaitBuck5 INTEGER 0..65535
  bcamTsapTabReactBuck1 INTEGER 0..65535
  bcamTsapTabReactBuck2 INTEGER 0..65535
  bcamTsapTabReactBuck3 INTEGER 0..65535
  bcamTsapTabReactBuck4 INTEGER 0..65535
  bcamTsapTabReactBuck5 INTEGER 0..65535
  bcamTsapTabTsduSendHists Counter
  bcamTsapTabByteSendHists Counter
  bcamTsapTabTsduReceivedHists Counter
  bcamTsapTabByteReceivedHists Counter
  bcamTsapTabSendCallOverMaxHists Counter
  bcamTsapTabLetterTimeoutHists Counter
  bcamTsapTabFunction INTEGER
  bcamTsapTabCurrConn Gauge
  bcamTsapTabCloseConns Counter
  bcamTsapTabClessSendBytes Counter
  bcamTsapTabClessRecvBytes Counter
  bcamTsapTabClessSendCalls Counter
  bcamTsapTabClessRecvCalls Counter
  bcamTsapTabOutbufTsdu Gauge
  bcamTsapTabOutbufByte Gauge
  bcamTsapTabInbufTsdu Gauge
  bcamTsapTabInbufByte Gauge
  bcamTsapTabOutbufTsduCless Gauge
  bcamTsapTabOutbufByteCless Gauge
  bcamTsapTabInbufTsduCless Gauge
  bcamTsapTabInbufByteCless Gauge
  bcamTsapTabClessTimeout INTEGER

ConnEntry  
SEQUENCE    
  bcamCepTabProtocolClass INTEGER
  bcamCepTabConnectionNumbers Counter
  bcamCepTabDisconCommand OCTET STRING Size(4)
  bcamCepTabDisconInfoWord OCTET STRING Size(4)
  bcamCepTabTsduSends Counter
  bcamCepTabByteSends Counter
  bcamCepTabTsduReceiveds Counter
  bcamCepTabByteReceiveds Counter
  bcamCepTabSendCallOverMaxs Counter
  bcamCepTabLetterTimeouts Counter
  bcamCepTabOutbufTsduSend Gauge
  bcamCepTabOutbufByteSend Gauge
  bcamCepTabOutbufMaxTsduSend Gauge
  bcamCepTabOutbufMaxByteSend Gauge
  bcamCepTabInbufTsdu Gauge
  bcamCepTabInbufByte Gauge
  bcamCepTabInbufMaxTsduReceived Gauge
  bcamCepTabInbufMaxByteReceived Gauge
  bcamCepTabPacketsDataSends Counter
  bcamCepTabPacketsWindowSends Counter
  bcamCepTabPacketsDataReceiveds Counter
  bcamCepTabPacketsWindowReceiveds Counter
  bcamCepTabGlobalZeroWindowSends Counter
  bcamCepTabConnectionZeroWindowSends Counter
  bcamCepTabZeroWindowReceiveds Counter
  bcamCepTabRoundTripTime INTEGER 0..65535
  bcamCepTabRetransmitPacketsSends Counter
  bcamCepTabDetectedGapsReceiveds Counter
  bcamCepTabDuplicatePacketsReceiveds Counter
  bcamCepTabErrorPacketsReceiveds Counter
  bcamCepTabConnectionState INTEGER
  bcamCepTabApplicationNumber INTEGER
  bcamCepTabRouteNumber INTEGER
  bcamCepTabDuration Gauge
  bcamCepTabDateConnectionEstablishment DisplayString Size(8)
  bcamCepTabTimeConnectionEstablishment DisplayString Size(6)
  bcamCepTabTypPartnerName INTEGER
  bcamCepTabPartnerName DisplayString Size(0..78)
  bcamCepTabLocalName DisplayString Size(0..78)
  bcamCepTabTypeL4Addr INTEGER
  bcamCepTabL4AddrPartner OCTET STRING Size(0..32)
  bcamCepTabL4AddrLocal OCTET STRING Size(0..32)
  bcamCepTabPartnerEndsystem DisplayString Size(8)
  bcamCepTabInWaitBuck1 INTEGER 0..65535
  bcamCepTabInWaitBuck2 INTEGER 0..65535
  bcamCepTabInWaitBuck3 INTEGER 0..65535
  bcamCepTabInWaitBuck4 INTEGER 0..65535
  bcamCepTabInWaitBuck5 INTEGER 0..65535
  bcamCepTabReactBuck1 INTEGER 0..65535
  bcamCepTabReactBuck2 INTEGER 0..65535
  bcamCepTabReactBuck3 INTEGER 0..65535
  bcamCepTabReactBuck4 INTEGER 0..65535
  bcamCepTabReactBuck5 INTEGER 0..65535
  bcamCepTabOutProcBuck1 INTEGER 0..65535
  bcamCepTabOutProcBuck2 INTEGER 0..65535
  bcamCepTabOutProcBuck3 INTEGER 0..65535
  bcamCepTabOutProcBuck4 INTEGER 0..65535
  bcamCepTabOutProcBuck5 INTEGER 0..65535
  bcamCepTabInProcBuck1 INTEGER 0..65535
  bcamCepTabInProcBuck2 INTEGER 0..65535
  bcamCepTabInProcBuck3 INTEGER 0..65535
  bcamCepTabInProcBuck4 INTEGER 0..65535
  bcamCepTabInProcBuck5 INTEGER 0..65535
  bcamCepTabMaxSendLen INTEGER
  bcamCepTabMaxIndLen INTEGER
  bcamCepTabLocalEndsystem DisplayString Size(8)

RoutEntry  
SEQUENCE    
  bcamRouteTabNumbers Counter
  bcamRouteTabName DisplayString Size(8)
  bcamRouteTabNumNeaConn Gauge
  bcamRouteTabNumIsoConn Gauge
  bcamRouteTabMaxNeaConn Gauge
  bcamRouteTabMaxIsoConn Gauge
  bcamRouteTabBadNeaElems Counter
  bcamRouteTabBadIsoElems Counter
  bcamRouteTabMaxL4Conn Gauge
  bcamRouteTabMaxUnackTpdu Gauge
  bcamRouteTabRouteNetTyp INTEGER
  bcamRouteTabNumberIsoIpRouter INTEGER
  bcamRouteTabNumberNeaRouter INTEGER
  bcamRouteTabNumberGateway INTEGER
  bcamRouteTabFunction INTEGER
  bcamRouteTabProcNetTyp INTEGER
  bcamRouteTabMaxTsduLen Gauge
  bcamRouteTabNameEndsystem DisplayString Size(8)
  bcamRouteTabIso4WindowTimer Gauge
  bcamRouteTabIso4RetransTimer Gauge
  bcamRouteTabAckTimer Gauge
  bcamRouteTabErrorRecovTimer Gauge
  bcamRouteTabRejectTimer Gauge
  bcamRouteTabExpedRetransTimer Gauge
  bcamRouteTabNameGateway DisplayString Size(8)
  bcamRouteTabNameX25Station DisplayString Size(8)
  bcamRouteTabL3InputProfil INTEGER
  bcamRouteTabTransState INTEGER
  bcamRouteTabOption INTEGER
  bcamRouteTabTyp INTEGER
  bcamRouteTabUsage INTEGER
  bcamRouteTabL3Subprofile INTEGER
  bcamRouteTabCommandState INTEGER
  bcamRouteTabChangeState INTEGER
  bcamRouteTabIso9542 INTEGER
  bcamRouteTabMaxNetLength INTEGER
  bcamRouteTabState2 INTEGER
  bcamRouteTabDeactReason INTEGER
  bcamRouteTabSwitchType INTEGER
  bcamRouteTabReasonCreation INTEGER
  bcamRouteTabOrigLanAddress PhysAddress
  bcamRouteTabLanAddress PhysAddress
  bcamRouteTabTypAddress INTEGER
  bcamRouteTabLocalAddr OCTET STRING Size(0..20)
  bcamRouteTabRemoteAddr OCTET STRING Size(0..20)
  bcamRouteTabOutPacketsDatas Counter
  bcamRouteTabOutPacketsFlowControls Counter
  bcamRouteTabInPacketsDatas Counter
  bcamRouteTabInPacketsFlowControls Counter
  bcamRouteTabOutRetransPackets Counter
  bcamRouteTabInDetectedGaps Counter
  bcamRouteTabInDuplicatedPackets Counter
  bcamRouteTabInIncorrectPackets Counter
  bcamRouteTabRoundTripTimeClosed INTEGER 0..65535
  bcamRouteTabRoundTripTimeCurrent INTEGER 0..65535
  bcamRouteTabArpReqSend INTEGER
  bcamRouteTabArpRepSend INTEGER
  bcamRouteTabArpReqRec INTEGER
  bcamRouteTabArpRepRec INTEGER
  bcamRouteTabIcmpReq INTEGER
  bcamRouteTabIcmpReply INTEGER
  bcamRouteTabIcmpRedirect INTEGER
  bcamRouteTabSwitched INTEGER
  bcamRouteTabDown INTEGER
  bcamRouteTabOspfHello INTEGER
  bcamRouteTabPacketNoConn INTEGER 0..65535
  bcamRouteTabPacketInternDiscon INTEGER 0..65535
  bcamRouteTabPacketBadProtocol INTEGER 0..65535
  bcamRouteTabConnReqOut INTEGER 0..65535
  bcamRouteTabConnReqOutAck INTEGER 0..65535
  bcamRouteTabConnReqOutRej INTEGER 0..65535
  bcamRouteTabConnReqIn INTEGER 0..65535
  bcamRouteTabConnReqInAck INTEGER 0..65535
  bcamRouteTabConnReqInRej INTEGER 0..65535
  bcamRouteTabDisconnOut INTEGER 0..65535
  bcamRouteTabDisconnOutAck INTEGER 0..65535
  bcamRouteTabDisconnIn INTEGER 0..65535
  bcamRouteTabDisconnInAck INTEGER 0..65535
  bcamRouteTabNumberLink INTEGER
  bcamRouteTabArpFlag INTEGER
  bcamRouteTabNsduLen INTEGER
  bcamRouteTabMinNsduLen INTEGER
  bcamRouteTabMaxNsduLen INTEGER

LinkEntry  
SEQUENCE    
  bcamIfTabNumbers Counter
  bcamIfTabName DisplayString Size(8)
  bcamIfTabProfile INTEGER
  bcamIfTabMnemonicWrite DisplayString Size(4)
  bcamIfTabMnemonicRead DisplayString Size(4)
  bcamIfTabLanAddress PhysAddress
  bcamIfTabConfigUpdate INTEGER
  bcamIfTabMaxLpdu INTEGER
  bcamIfTabL2Monitoring INTEGER
  bcamIfTabDevice INTEGER
  bcamIfTabAdminState INTEGER
  bcamIfTabCurrentState INTEGER
  bcamIfTabMode INTEGER
  bcamIfTabPortName DisplayString Size(8)
  bcamIfTabLenTraceOut INTEGER 0..4096
  bcamIfTabLenTraceIn INTEGER 0..4096
  bcamIfTabNumRouteSwitchings INTEGER
  bcamIfTabTimeLastChange INTEGER
  bcamIfTabMnemonicDiag DisplayString Size(4)
  bcamIfTabNumMulticastAddr INTEGER
  bcamIfTabMulticastAddr1 PhysAddress
  bcamIfTabMulticastAddr2 PhysAddress
  bcamIfTabMulticastAddr3 PhysAddress
  bcamIfTabMulticastAddr4 PhysAddress
  bcamIfTabMulticastAddr5 PhysAddress
  bcamIfTabMulticastAddr6 PhysAddress
  bcamIfTabMulticastAddr7 PhysAddress
  bcamIfTabMulticastAddr8 PhysAddress
  bcamIfTabMulticastAddr9 PhysAddress
  bcamIfTabMulticastAddr10 PhysAddress
  bcamIfTabNumNeaAddress INTEGER
  bcamIfTabNeaAddress1 OCTET STRING Size(2)
  bcamIfTabNeaAddress2 OCTET STRING Size(2)
  bcamIfTabNeaAddress3 OCTET STRING Size(2)
  bcamIfTabNeaAddress4 OCTET STRING Size(2)
  bcamIfTabNeaAddress5 OCTET STRING Size(2)
  bcamIfTabNeaAddress6 OCTET STRING Size(2)
  bcamIfTabNumIpAddress INTEGER
  bcamIfTabIpAddress1 IpAddress
  bcamIfTabIpAddress2 IpAddress
  bcamIfTabIpAddress3 IpAddress
  bcamIfTabIpAddress4 IpAddress
  bcamIfTabIpAddress5 IpAddress
  bcamIfTabIpAddress6 IpAddress
  bcamIfTabNumInt0Address INTEGER
  bcamIfTabInt0Address1 PhysAddress
  bcamIfTabInt0Address2 PhysAddress
  bcamIfTabInt0Address3 PhysAddress
  bcamIfTabInt0Address4 PhysAddress
  bcamIfTabInt0Address5 PhysAddress
  bcamIfTabInt0Address6 PhysAddress
  bcamIfTabNumIntfAddress INTEGER
  bcamIfTabIntfAddress1 OCTET STRING Size(0..20)
  bcamIfTabIntfAddress2 OCTET STRING Size(0..20)
  bcamIfTabIntfAddress3 OCTET STRING Size(0..20)
  bcamIfTabIntfAddress4 OCTET STRING Size(0..20)
  bcamIfTabIntfAddress5 OCTET STRING Size(0..20)
  bcamIfTabIntfAddress6 OCTET STRING Size(0..20)
  bcamIfTabBytesOutHighs Counter
  bcamIfTabBytesOutLows Counter
  bcamIfTabBytesInHighs Counter
  bcamIfTabBytesInLows Counter
  bcamIfTabIOsOutHighs Counter
  bcamIfTabIOsOutLows Counter
  bcamIfTabIOsInHighs Counter
  bcamIfTabIOsInLows Counter
  bcamIfTabOutputStops Counter
  bcamIfTabInputStops Counter
  bcamIfTabIOErrorOuts Counter
  bcamIfTabIOErrorIns Counter
  bcamIfTabPacketsNotReceiveds Counter
  bcamIfTabInPacketsLanHighs Counter
  bcamIfTabInPacketsLanLows Counter
  bcamIfTabOutPacketsLanHighs Counter
  bcamIfTabOutPacketsLanLows Counter
  bcamIfTabUnicastInHighs Counter
  bcamIfTabUnicastInLows Counter
  bcamIfTabUnicastOutHighs Counter
  bcamIfTabUnicastOutLows Counter
  bcamIfTabMulticastInHighs Counter
  bcamIfTabMulticastInLows Counter
  bcamIfTabMulticastOutHighs Counter
  bcamIfTabMulticastOutLows Counter
  bcamIfTabErrorPacketIns Counter
  bcamIfTabErrorPacketOuts Counter
  bcamIfTabDiscardIns Counter
  bcamIfTabDiscardOuts Counter
  bcamIfTabUnknownProtoIns Counter
  bcamIfTabTraceState INTEGER
  bcamIfTabTraceNumberBuffer INTEGER
  bcamIfTabTraceBufferLen INTEGER

RouterEntry  
SEQUENCE    
  bcamRouterTabIpLow IpAddress
  bcamRouterTabIpHigh IpAddress
  bcamRouterTabIpLocal IpAddress
  bcamRouterTabIpRouter IpAddress
  bcamRouterTabNumRouter INTEGER

HostEntry  
SEQUENCE    
  bcamHostTabNumber INTEGER
  bcamHostTabName DisplayString Size(8)
  bcamHostTabSocketName DisplayString Size(0..32)
  bcamHostTabTyp INTEGER
  bcamHostTabState INTEGER

Defined Values

sni 1.3.6.1.4.1.231
OBJECT IDENTIFIER    

sniProductMibs 1.3.6.1.4.1.231.2
OBJECT IDENTIFIER    

sniBcam 1.3.6.1.4.1.231.2.17
OBJECT IDENTIFIER    

bcamTrap 1.3.6.1.4.1.231.2.17.1
OBJECT IDENTIFIER    

bcamGlobal 1.3.6.1.4.1.231.2.17.2
OBJECT IDENTIFIER    

bcamMemory 1.3.6.1.4.1.231.2.17.3
OBJECT IDENTIFIER    

bcamTrace 1.3.6.1.4.1.231.2.17.4
OBJECT IDENTIFIER    

bcamTsap 1.3.6.1.4.1.231.2.17.5
OBJECT IDENTIFIER    

bcamCep 1.3.6.1.4.1.231.2.17.6
OBJECT IDENTIFIER    

bcamRoute 1.3.6.1.4.1.231.2.17.7
OBJECT IDENTIFIER    

bcamIf 1.3.6.1.4.1.231.2.17.8
OBJECT IDENTIFIER    

bcamRouter 1.3.6.1.4.1.231.2.17.9
OBJECT IDENTIFIER    

bcamHost 1.3.6.1.4.1.231.2.17.10
OBJECT IDENTIFIER    

bcamTrapString 1.3.6.1.4.1.231.2.17.1.1
Textual description of the trap. The trap string contains the values sent with the trap in printable form separated by the keywords given at the description of the individual traps.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

bcamTrapOutPoolOverCurrent 1.3.6.1.4.1.231.2.17.1.2
The number of bytes of resident memory used for output cells when the trap condition (output pool over maximum) has been recognized.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

bcamTrapOutPoolUnderCurrent 1.3.6.1.4.1.231.2.17.1.3
The number of bytes of resident memory used for output cells when the trap condition (output pool under maximum) has been recognized.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

bcamTrapInPoolOverCurrent 1.3.6.1.4.1.231.2.17.1.4
The number of bytes of resident memory used for input cells when the trap condition (input pool over maximum) has been recognized.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

bcamTrapInPoolUnderCurrent 1.3.6.1.4.1.231.2.17.1.5
The number of bytes of resident memory used for input cells when the trap condition (input pool under maximum) has been recognized.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

bcamTrapOutPoolOver 301
This trap will be sent if the resident memory used for output cells exceeds the limit (bcamMemoryPoolOutputLimitTrap) for more than 5 seconds. bcamTrapString has the fields: $: $: $: $: The following values will be sent together with the trap: bcamGlobalHostName bcamGlobalUpTime bcamMemoryPoolOutputLimitTrap bcamMemoryPoolOverCurrent bcamTrapString
TRAP-TYPE    

bcamTrapOutPoolUnder 302
This trap will be sent if the resident memory used for output cells has exceeded the limit (bcamMemoryPoolOutputLimitTrap) and falls under the limit for more than 5 seconds. bcamTrapString has the fields: $: $: $: $: The following values will be sent together with the trap: bcamGlobalHostName bcamGlobalUpTime bcamMemoryPoolOutputLimitTrap bcamMemoryPoolUnderCurrent bcamTrapString
TRAP-TYPE    

bcamTrapInPoolOver 303
This trap will be sent if the resident memory used for input cells exceeds the limit (bcamMemoryPoolInputLimitTrap) for more than 5 seconds. bcamTrapString has the fields: $: $: $: $: The following values will be sent together with the trap: bcamGlobalHostName bcamGlobalUpTime bcamMemoryPoolInputLimitTrap bcamTrapInPoolOverCurrent bcamTrapString
TRAP-TYPE    

bcamTrapInPoolUnder 304
This trap will be sent if the resident memory used for input cells has exceeded the limit (bcamMemoryPoolInputLimitTrap) and falls under the limit for more than 5 seconds. bcamTrapString has the fields: $: $: $: $: The following values will be sent together with the trap: bcamGlobalHostName bcamGlobalUpTime bcamMemoryPoolInputLimitTrap bcamTrapInPoolUnderCurrent bcamTrapString
TRAP-TYPE    

bcamTrapLinkUp 305
This trap will be sent if an interface enters the state active (bcamIfAdminState). bcamTrapString has the fields: $: $: $: $: The following values will be sent together with the trap: bcamGlobalHostName bcamGlobalUpTime bcamIfTabNumbers bcamIfTabName bcamTrapString
TRAP-TYPE    

bcamTrapLinkDown 306
This trap will be sent if an interface leaves the state active (bcamIfAdminState). bcamTrapString has the fields: $: $: $: $: The following values will be sent together with the trap: bcamGlobalHostName bcamGlobalUpTime bcamIfTabNumbers bcamIfTabName bcamTrapString
TRAP-TYPE    

bcamTrapSystemUp 307
This trap will be sent after a successful start of BCAM. bcamTrapString has the fields: $: $: The following values will be sent together with the trap: bcamGlobalHostName bcamGlobalUpTime bcamTrapString
TRAP-TYPE    

bcamGlobalBcamVersion 1.3.6.1.4.1.231.2.17.2.1
The version of BCAM in the form xx.yy xx: mainversion yy: subversion
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(6)  

bcamGlobalMibVersion 1.3.6.1.4.1.231.2.17.2.2
Version of BCAM specific MIB (beginning with 1). Will be increased with every enhancement of this MIB
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamGlobalUpTime 1.3.6.1.4.1.231.2.17.2.3
Time in seconds since start of BCAM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamGlobalPortNonpriv 1.3.6.1.4.1.231.2.17.2.4
The lowest port number that may be used by non privileged applications
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamGlobalPortFree 1.3.6.1.4.1.231.2.17.2.5
The lowest port number that will be assigned dynamical by BCAM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamGlobalNumBitmap 1.3.6.1.4.1.231.2.17.2.6
The number of bitmaps to administer slots in the data slot pool. Every bitmap can administer 2048 slots. So the maximum number of slots in a pool is bcamGlobalNumBitmap*2048
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamGlobalMaxRemoteIp 1.3.6.1.4.1.231.2.17.2.7
The maximum length in bytes BCAM uses for an NSDU for an endsystem that is reached over at least one router
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamGlobalEsCreationIp 1.3.6.1.4.1.231.2.17.2.8
The types of IP protocols that will lead to automatic endsystem creation: ipOff (1) : no automatic endsystem creation due to IP protocols. ipInData (2) : automatic endsystem creation due to IP data received. ipOutData (4) : automatic endsystem creation due to IP data sent. ipRoutingProt (8) : automatic endsystem creation due to IP routing protocols. ipRoutingData (16) : automatic endsystem creation due to routed IP protocols.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ipOff(1), ipInData(2), ipOutData(4), ipRoutingProt(8), ipRoutingData(16)  

bcamGlobalEsCreationIso 1.3.6.1.4.1.231.2.17.2.9
The types of ISO 8473 and ISO 9542 protocols that will lead to automatic endsystem creation: isoOff (1) : no automatic endsystem creation due to ISO protocols. isoInData (2) : automatic endsystem creation due to ISO data received. isoOutData (4) : automatic endsystem creation due to ISO data sent. isoRoutingProt (8) : automatic endsystem creation due to ISO routing protocols. isoRoutingData (16) : automatic endsystem creation due to routed ISO protocols.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isoOff(1), isoInData(2), isoOutData(4), isoRoutingProt(8), isoRoutingData(16)  

bcamGlobalBroadcast 1.3.6.1.4.1.231.2.17.2.10
Describes how incoming broadcasts will be treated. on (2) : broadcasts will be evaluated and answered if necessary. off (1) : broadcasts will be ignored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

bcamGlobalArp 1.3.6.1.4.1.231.2.17.2.11
Describes if the address resolution protocol is used. off (1) : no ARP will be used. quiet (2) : ARP will be used the first time a route is used and periodically if there exists a transport connection to the system described by this route and there was no data transfer in the last supervision interval. on (4) : ARP will be used the first time a route is used and periodically after the supervision interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), quiet(2), on(4)  

bcamGlobalRarp 1.3.6.1.4.1.231.2.17.2.12
Describes if the reverse address resolution protocol will be supported. off (1) : RARP not supported. on (2) : RARP supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

bcamGlobalInWaitLimit1 1.3.6.1.4.1.231.2.17.2.13
The lowest bucket limit for the recording of the input wait times in milliseconds. The input wait time is the time interval between the announcement of a message to an application and corresponding receive call. Every change will reset all counters for the input wait time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalInWaitLimit2 1.3.6.1.4.1.231.2.17.2.14
The second bucket limit for the recording of the input wait times in milliseconds. The input wait time is the time interval between the announcement of a message to an application and corresponding receive call. Every change will reset all counters for the input wait time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalInWaitLimit3 1.3.6.1.4.1.231.2.17.2.15
The third bucket limit for the recording of the input wait times in milliseconds. The input wait time is the time interval between the announcement of a message to an application and corresponding receive call. Every change will reset all counters for the input wait time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalInWaitLimit4 1.3.6.1.4.1.231.2.17.2.16
The highest bucket limit for the recording of the input wait times in milliseconds. The input wait time is the time interval between the announcement of a message to an application and corresponding receive call. Every change will reset all counters for the input wait time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalInWaitChange 1.3.6.1.4.1.231.2.17.2.17
The number of times the limits of the input wait time buckets have been changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

bcamGlobalInWaitSet 1.3.6.1.4.1.231.2.17.2.18
The state of counting into the input wait time buckets. off (2) : the counting is stopped. on (1) : the counting is running.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

bcamGlobalReactLimit1 1.3.6.1.4.1.231.2.17.2.19
The lowest bucket limit for the recording of the application reaction times in milliseconds. The application reaction time is the time interval between a receive call and a directly following send call. Every change will reset all counters for the application reaction time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalReactLimit2 1.3.6.1.4.1.231.2.17.2.20
The second bucket limit for the recording of the application reaction times in milliseconds. The application reaction time is the time interval between a receive call and a directly following send call. Every change will reset all counters for the application reaction time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalReactLimit3 1.3.6.1.4.1.231.2.17.2.21
The third bucket limit for the recording of the application reaction times in milliseconds. The application reaction time is the time interval between a receive call and a directly following send call. Every change will reset all counters for the application reaction time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalReactLimit4 1.3.6.1.4.1.231.2.17.2.22
The highest bucket limit for the recording of the application reaction times in milliseconds. The application reaction time is the time interval between a receive call and a directly following send call. Every change will reset all counters for the application reaction time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalReactChange 1.3.6.1.4.1.231.2.17.2.23
The number of times the limits of the application reaction time buckets have been changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

bcamGlobalReactSet 1.3.6.1.4.1.231.2.17.2.24
The state of counting into the application reaction time buckets. off (2) : the counting is stopped. on (1) : the counting is running.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

bcamGlobalInProcLimit1 1.3.6.1.4.1.231.2.17.2.25
The lowest bucket limit for the recording of the inbound processing times in milliseconds. The inbound processing time is the time interval between the arrival of the first byte of a message at layer 2 and the receive of the last byte this message by the application. Every change will reset all counters for the inbound processing time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalInProcLimit2 1.3.6.1.4.1.231.2.17.2.26
The second bucket limit for the recording of the inbound processing times in milliseconds. The inbound processing time is the time interval between the arrival of the first byte of a message at layer 2 and the receive of the last byte this message by the application. Every change will reset all counters for the inbound processing time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalInProcLimit3 1.3.6.1.4.1.231.2.17.2.27
The third bucket limit for the recording of the inbound processing times in milliseconds. The inbound processing time is the time interval between the arrival of the first byte of a message at layer 2 and the receive of the last byte this message by the application. Every change will reset all counters for the inbound processing time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalInProcLimit4 1.3.6.1.4.1.231.2.17.2.28
The highest bucket limit for the recording of the inbound processing times in milliseconds. The inbound processing time is the time interval between the arrival of the first byte of a message at layer 2 and the receive of the last byte this message by the application. Every change will reset all counters for the inbound processing time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalInProcChange 1.3.6.1.4.1.231.2.17.2.29
The number of times the limits of the inbound processing time buckets have been changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

bcamGlobalInProcSet 1.3.6.1.4.1.231.2.17.2.30
The state of counting into the inbound processing time buckets. off (2) : the counting is stopped. on (1) : the counting is running.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

bcamGlobalOutProcLimit1 1.3.6.1.4.1.231.2.17.2.31
The lowest bucket limit for the recording of the outbound processing times in milliseconds. The outbound processing time is the time interval between the send call of an application and the confirmation for the processing of the last byte of the message by layer 1. Every change will reset all counters for the outbound processing time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalOutProcLimit2 1.3.6.1.4.1.231.2.17.2.32
The second bucket limit for the recording of the outbound processing times in milliseconds. The outbound processing time is the time interval between the send call of an application and the confirmation for the processing of the last byte of the message by layer 1. Every change will reset all counters for the outbound processing time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalOutProcLimit3 1.3.6.1.4.1.231.2.17.2.33
The third bucket limit for the recording of the outbound processing times in milliseconds. The outbound processing time is the time interval between the send call of an application and the confirmation for the processing of the last byte of the message by layer 1. Every change will reset all counters for the outbound processing time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalOutProcLimit4 1.3.6.1.4.1.231.2.17.2.34
The highest bucket limit for the recording of the outbound processing times in milliseconds. The outbound processing time is the time interval between the send call of an application and the confirmation for the processing of the last byte of the message by layer 1. Every change will reset all counters for the outbound processing time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamGlobalOutProcChange 1.3.6.1.4.1.231.2.17.2.35
The number of times the limits of the outbound processing time buckets have been changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

bcamGlobalOutProcSet 1.3.6.1.4.1.231.2.17.2.36
The state of counting into the outbound processing time buckets. off (2) : the counting is stopped. on (1) : the counting is running.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

bcamGlobalSnmpRelease 1.3.6.1.4.1.231.2.17.2.37
The time interval in minutes for which the values for already closed connections and applications are still available.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

bcamGlobalTrapPollInterval 1.3.6.1.4.1.231.2.17.2.38
The time interval in seconds after which the SNMP agent will poll for traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

bcamGlobalFileApplTable 1.3.6.1.4.1.231.2.17.2.39
The name of the file that contains the assignments of NEA or ISO applications to the virtual host on which they shall run.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(54)  

bcamGlobalFileSocketHostTable 1.3.6.1.4.1.231.2.17.2.40
The name of the file that contains the assignments of IP adresses to socket host names for automatic created endsystems.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(54)  

bcamGlobalFileProcTable 1.3.6.1.4.1.231.2.17.2.41
The name of the file that contains the assignments of host names to net addresses for automatic created endsystems.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(54)  

bcamGlobalAccessProcTable 1.3.6.1.4.1.231.2.17.2.42
The access of the file named in bcamGlobalFileProcTable: read (1) : only endsystems contained in the file will be created by automatic endsystem creation. update (2) : the file will be extended if a new endsystem is created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER read(1), update(2)  

bcamGlobalHostName 1.3.6.1.4.1.231.2.17.2.43
NEA name of the local endsystem
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

bcamMemoryClass3 1.3.6.1.4.1.231.2.17.3.1
The number of bytes of class 3 memory requested by BCAM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryClass4 1.3.6.1.4.1.231.2.17.3.2
The number of bytes of class 4 memory requested by BCAM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryLenLongEventSlot 1.3.6.1.4.1.231.2.17.3.3
The length of one long event slot in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryOccLongEventSlot 1.3.6.1.4.1.231.2.17.3.4
The number of long event slots currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryLenShortEventSlot 1.3.6.1.4.1.231.2.17.3.5
The length of one short event slot in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryOccShortEventSlot 1.3.6.1.4.1.231.2.17.3.6
The number of short event slots currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryLenTransParamSlot 1.3.6.1.4.1.231.2.17.3.7
The length of one transport parameter block in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryOccTransParamSlot 1.3.6.1.4.1.231.2.17.3.8
The number of transport parameter blocks currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryLenSnmpParamSlot 1.3.6.1.4.1.231.2.17.3.9
The length of one SNMP parameter block in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryOccSnmpParamSlot 1.3.6.1.4.1.231.2.17.3.10
The number of SNMP parameter blocks currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryLenApplCb 1.3.6.1.4.1.231.2.17.3.11
The length of one application control block in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryOccApplCb 1.3.6.1.4.1.231.2.17.3.12
The number of application control blocks currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryLenEnaCb 1.3.6.1.4.1.231.2.17.3.13
The length of one control block in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryOccEnaCb 1.3.6.1.4.1.231.2.17.3.14
The number of control blocks currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryLenExtApplCb 1.3.6.1.4.1.231.2.17.3.15
The length of one extended application control block in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryOccExtApplCb 1.3.6.1.4.1.231.2.17.3.16
The number of extended application control blocks currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryLenShortResConn2 1.3.6.1.4.1.231.2.17.3.17
The length of one short resident connection control block 2 in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryOccShortResConn2 1.3.6.1.4.1.231.2.17.3.18
The number of short resident connection control blocks 2 currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryLenLongResConn2 1.3.6.1.4.1.231.2.17.3.19
The length of one long resident connection control block 2 in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryOccLongResConn2 1.3.6.1.4.1.231.2.17.3.20
The number of long resident connection control blocks 2 currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryLenShortPagConn1 1.3.6.1.4.1.231.2.17.3.21
The length of one short pageable connection control block 1 in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryOccShortPagConn1 1.3.6.1.4.1.231.2.17.3.22
The number of short pageable connection control blocks 1 currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryLenSnmpConn 1.3.6.1.4.1.231.2.17.3.23
The length of one SNMP connection control block in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryOccSnmpConn 1.3.6.1.4.1.231.2.17.3.24
The number of SNMP connection control blocks currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryLenLongPagConn1 1.3.6.1.4.1.231.2.17.3.25
The length of one long pageable connection control block 1 in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryOccLongPagConn1 1.3.6.1.4.1.231.2.17.3.26
The number of long pageable connection control blocks 1 currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryLenShortPagConn2 1.3.6.1.4.1.231.2.17.3.27
The length of one short pageable connection control block 2 in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryOccShortPagConn2 1.3.6.1.4.1.231.2.17.3.28
The number of short pageable connection control blocks 2 currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolInputCurrent 1.3.6.1.4.1.231.2.17.3.29
The number of bytes of resident memory currently used for input cells
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolInputResume 1.3.6.1.4.1.231.2.17.3.30
Describes whether an interface waits for memory for input . If zero, some interfaces will not have enough input buffer( A cell request was rejected because bcamMemoryPoolInputCurrent exceeded bcamMemoryPoolInputLimitTrap).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolInputMonMax 1.3.6.1.4.1.231.2.17.3.31
The maximum number of bytes of resident memory used for input cells for the last 5 seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolInputMonMin 1.3.6.1.4.1.231.2.17.3.32
The minimum number of bytes of resident memory used for input cells for the last 5 seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolInputLimit 1.3.6.1.4.1.231.2.17.3.33
The maximum number of bytes of resident memory to be used for input cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolInputLimitTrap 1.3.6.1.4.1.231.2.17.3.34
The trap limit for the number of bytes of resident memory for input cells (if bcamMemoryPoolInputMonMin is greater than bcamMemoryPoolInputLimitTrap, a trap will be sent).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolMaxResident 1.3.6.1.4.1.231.2.17.3.35
The maximum number of bytes of resident memory to be used for input and output cells.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolMaxPageable 1.3.6.1.4.1.231.2.17.3.36
The maximum number of bytes of pageable memory to be used for input and output cells.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolInputMaxPageable 1.3.6.1.4.1.231.2.17.3.37
The maximum number of bytes of pageable memory to be used for input cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolOutputCurrent 1.3.6.1.4.1.231.2.17.3.38
The number of bytes of resident memory currently used for output cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolOutputResume 1.3.6.1.4.1.231.2.17.3.39
Describes whether an interface waits for memory for output . If zero, some interfaces will not have enough output buffer( A cell request was rejected because bcamMemoryPoolOutputCurrent exceeded bcamMemoryPoolOutputLimitTrap).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolOutputMonMax 1.3.6.1.4.1.231.2.17.3.40
The maximum number of bytes of resident memory used for output cells for the last 5 seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolOutputMonMin 1.3.6.1.4.1.231.2.17.3.41
The minimum number of bytes of resident memory used for output cells for the last 5 seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolOutputLimit 1.3.6.1.4.1.231.2.17.3.42
The maximum number of bytes of resident memory to be used for output cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolOutputLimitTrap 1.3.6.1.4.1.231.2.17.3.43
The trap limit for the number of bytes of resident memory for output cells (if bcamMemoryPoolOutputMonMin is greater than bcamMemoryPoolOutputLimitTrap, a trap will be sent).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolMaxCells 1.3.6.1.4.1.231.2.17.3.44
The maximum number of cells contained in every pool type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolOutputMaxPageable 1.3.6.1.4.1.231.2.17.3.45
The maximum number of bytes of pageable memory to be used for output cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolRoutingCurrent 1.3.6.1.4.1.231.2.17.3.46
The number of bytes of resident memory currently used for routing cells
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolRoutingLimit 1.3.6.1.4.1.231.2.17.3.47
The maximum number of bytes of resident memory to be used for routing cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolPageableCurrent 1.3.6.1.4.1.231.2.17.3.48
The number of bytes of pageable memory currently used for pools
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryPoolPageableFixed 1.3.6.1.4.1.231.2.17.3.49
The number of bytes of pageable fixed memory currently used for output cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryCellReqSucc 1.3.6.1.4.1.231.2.17.3.50
The number of successful cell requests.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryCellReqResOutExceed 1.3.6.1.4.1.231.2.17.3.51
The number of requests for resident output cells that failed because the limit has been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryCellReqResInExceed 1.3.6.1.4.1.231.2.17.3.52
The number of requests for resident input cells that failed because limit has been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryCellReqTempExceed 1.3.6.1.4.1.231.2.17.3.53
The number of cell requests failed because of temporary shortage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryCellReqBitmapFull 1.3.6.1.4.1.231.2.17.3.54
The number of cell requests failed because bitmap was full.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryCellReqNoMemory 1.3.6.1.4.1.231.2.17.3.55
The number of cell requests failed because memory request failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryCellReqPagInExceed 1.3.6.1.4.1.231.2.17.3.56
The number of requests for pageable input cells that failed because limit has been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamMemoryCellReqPagOutExceed 1.3.6.1.4.1.231.2.17.3.57
The number of requests for pageable output cells that failed because limit has been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTraceSavingState 1.3.6.1.4.1.231.2.17.4.1
Describes if any of the running BCAM traces are saved to a file. noSaving (32) : no trace will be written initiated (1) : the trace saving task has been created active (2) : the trace saving task is active shutting (4) : the trace saving task is terminating passive (8) : the trace file has been closed waiting (16) : the trace saving task is waiting for trace data to write Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initiated(1), active(2), shutting(4), passive(8), waiting(16), noSaving(32)  

bcamTraceFilename 1.3.6.1.4.1.231.2.17.4.2
The name of the file currently used for saving BCAM traces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(54)  

bcamTraceMaxFilesize 1.3.6.1.4.1.231.2.17.4.3
The maximum size of one file used for saving BCAM traces in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTraceNumberFiles 1.3.6.1.4.1.231.2.17.4.4
The number of files used for saving BCAM traces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTraceAdmState 1.3.6.1.4.1.231.2.17.4.5
The current state of the trace. stopped (8) : the trace is not running. running (1) : the trace is running. save (2) : the trace is running and saved to a file. hold (4) : the trace data will be kept in case of an error. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), save(2), hold(4), stopped(8)  

bcamTraceAdmNumberBuffer 1.3.6.1.4.1.231.2.17.4.6
The number of buffers used for the trace
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

bcamTraceAdmBufferLen 1.3.6.1.4.1.231.2.17.4.7
The length of one trace buffer in bytes (rounded up to multiples of 256).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 512..16384  

bcamTraceBasicState 1.3.6.1.4.1.231.2.17.4.8
The current state of the trace. stopped (8) : the trace is not running. running (1) : the trace is running. save (2) : the trace is running and saved to a file. hold (4) : the trace data will be kept in case of an error. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), save(2), hold(4), stopped(8)  

bcamTraceBasicNumberBuffer 1.3.6.1.4.1.231.2.17.4.9
The number of buffers used for the trace
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

bcamTraceBasicBufferLen 1.3.6.1.4.1.231.2.17.4.10
The length of one trace buffer in bytes (rounded up to multiples of 256).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 512..16384  

bcamTraceConnState 1.3.6.1.4.1.231.2.17.4.11
The current state of the trace. stopped (8) : the trace is not running. running (1) : the trace is running. save (2) : the trace is running and saved to a file. hold (4) : the trace data will be kept in case of an error. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), save(2), hold(4), stopped(8)  

bcamTraceConnNumberBuffer 1.3.6.1.4.1.231.2.17.4.12
The number of buffers used for the trace
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

bcamTraceConnBufferLen 1.3.6.1.4.1.231.2.17.4.13
The length of one trace buffer in bytes (rounded up to multiples of 256).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 512..16384  

bcamTraceLocalState 1.3.6.1.4.1.231.2.17.4.14
The current state of the trace. stopped (8) : the trace is not running. running (1) : the trace is running. save (2) : the trace is running and saved to a file. hold (4) : the trace data will be kept in case of an error. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), save(2), hold(4), stopped(8)  

bcamTraceLocalNumberBuffer 1.3.6.1.4.1.231.2.17.4.15
The number of buffers used for the trace
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

bcamTraceLocalBufferLen 1.3.6.1.4.1.231.2.17.4.16
The length of one trace buffer in bytes (rounded up to multiples of 256).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 512..16384  

bcamTraceMappingState 1.3.6.1.4.1.231.2.17.4.17
The current state of the trace. stopped (8) : the trace is not running. running (1) : the trace is running. save (2) : the trace is running and saved to a file. hold (4) : the trace data will be kept in case of an error. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), save(2), hold(4), stopped(8)  

bcamTraceMappingNumberBuffer 1.3.6.1.4.1.231.2.17.4.18
The number of buffers used for the trace
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

bcamTraceMappingBufferLen 1.3.6.1.4.1.231.2.17.4.19
The length of one trace buffer in bytes (rounded up to multiples of 256).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 512..16384  

bcamTraceMgmtState 1.3.6.1.4.1.231.2.17.4.20
The current state of the trace. stopped (8) : the trace is not running. running (1) : the trace is running. save (2) : the trace is running and saved to a file. hold (4) : the trace data will be kept in case of an error. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), save(2), hold(4), stopped(8)  

bcamTraceMgmtNumberBuffer 1.3.6.1.4.1.231.2.17.4.21
The number of buffers used for the trace
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

bcamTraceMgmtBufferLen 1.3.6.1.4.1.231.2.17.4.22
The length of one trace buffer in bytes (rounded up to multiples of 256).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 512..16384  

bcamTraceNetState 1.3.6.1.4.1.231.2.17.4.23
The current state of the trace. stopped (8) : the trace is not running. running (1) : the trace is running. save (2) : the trace is running and saved to a file. hold (4) : the trace data will be kept in case of an error. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), save(2), hold(4), stopped(8)  

bcamTraceNetNumberBuffer 1.3.6.1.4.1.231.2.17.4.24
The number of buffers used for the trace
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

bcamTraceNetBufferLen 1.3.6.1.4.1.231.2.17.4.25
The length of one trace buffer in bytes (rounded up to multiples of 256).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 512..16384  

bcamTraceSnmpState 1.3.6.1.4.1.231.2.17.4.26
The current state of the trace. stopped (8) : the trace is not running. running (1) : the trace is running. save (2) : the trace is running and saved to a file. hold (4) : the trace data will be kept in case of an error. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), save(2), hold(4), stopped(8)  

bcamTraceSnmpNumberBuffer 1.3.6.1.4.1.231.2.17.4.27
The number of buffers used for the trace
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

bcamTraceSnmpBufferLen 1.3.6.1.4.1.231.2.17.4.28
The length of one trace buffer in bytes (rounded up to multiples of 256).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 512..16384  

bcamTraceTransState 1.3.6.1.4.1.231.2.17.4.29
The current state of the trace. stopped (8) : the trace is not running. running (1) : the trace is running. save (2) : the trace is running and saved to a file. hold (4) : the trace data will be kept in case of an error. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), save(2), hold(4), stopped(8)  

bcamTraceTransNumberBuffer 1.3.6.1.4.1.231.2.17.4.30
The number of buffers used for the trace
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

bcamTraceTransBufferLen 1.3.6.1.4.1.231.2.17.4.31
The length of one trace buffer in bytes (rounded up to multiples of 256).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 512..16384  

bcamTraceInfoState 1.3.6.1.4.1.231.2.17.4.32
The current state of the trace. stopped (8) : the trace is not running. running (1) : the trace is running. save (2) : the trace is running and saved to a file. hold (4) : the trace data will be kept in case of an error. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), save(2), hold(4), stopped(8)  

bcamTraceInfoNumberBuffer 1.3.6.1.4.1.231.2.17.4.33
The number of buffers used for the trace
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

bcamTraceInfoBufferLen 1.3.6.1.4.1.231.2.17.4.34
The length of one trace buffer in bytes (rounded up to multiples of 256).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 512..16384  

bcamTsapCurrOpen 1.3.6.1.4.1.231.2.17.5.1
The number of currently active TSAPs (including BCAM internal applications).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapTotOpen 1.3.6.1.4.1.231.2.17.5.2
The number of TSAPs opened since start of BCAM (excluding the active TSAPs).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapSendCall 1.3.6.1.4.1.231.2.17.5.3
Number of successful send calls of all TSAPs since start of BCAM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapSendByteHigh 1.3.6.1.4.1.231.2.17.5.4
Number of bytes given to BCAM-interface to send from all TSAPs since start of BCAM (high word, multiply by 4294967296).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapSendByteLow 1.3.6.1.4.1.231.2.17.5.5
Number of bytes given to BCAM-interface to send from all TSAPs since start of BCAM (low word, add to high word).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapRecvCall 1.3.6.1.4.1.231.2.17.5.6
Number of successful receive calls of all TSAPs since start of BCAM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapRecvByteHigh 1.3.6.1.4.1.231.2.17.5.7
Number of bytes given from BCAM to all TSAPs since start of BCAM (high word, multiply by 4294967296).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapRecvByteLow 1.3.6.1.4.1.231.2.17.5.8
Number of bytes given from BCAM to all TSAPs since start of BCAM (low word, add to high word).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapSendCallCless 1.3.6.1.4.1.231.2.17.5.9
The number of successful send calls for connectionless data of all TSAPs since start of BCAM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapSendByteClessHigh 1.3.6.1.4.1.231.2.17.5.10
The number of bytes given to BCAM-interface to send connectionless from all TSAPs since start of BCAM (high word, multiply by 4294967296).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapSendByteClessLow 1.3.6.1.4.1.231.2.17.5.11
The number of bytes given to BCAM-interface to send connectionless from all TSAPs since start of BCAM (low word, add to high word).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapRecvCallCless 1.3.6.1.4.1.231.2.17.5.12
The number of successful send calls for connectionless data of all TSAPs since start of BCAM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapRecvByteClessHigh 1.3.6.1.4.1.231.2.17.5.13
The number of bytes received connectionless given from BCAM to all TSAPs since start of BCAM (high word, multiply by 4294967296).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapRecvByteClessLow 1.3.6.1.4.1.231.2.17.5.14
The number of bytes received connectionless given from BCAM to all TSAPs since start of BCAM (low word, add to high word).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapNumTable 1.3.6.1.4.1.231.2.17.5.15
The number of table entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapMaxTsap 1.3.6.1.4.1.231.2.17.5.16
The maximum number of not predefined applications that may be opened simultaneously.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapMaxTsapTask 1.3.6.1.4.1.231.2.17.5.17
The maximum number of not predefined applications that may be opened simultaneously by one task.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapMaxCepTsap 1.3.6.1.4.1.231.2.17.5.18
The maximum number of connections a non system application may have opened concurrently.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapRejTsap 1.3.6.1.4.1.231.2.17.5.19
The number of rejected tsap openings because of reached maximum (see bcamTsapMaxTsap).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapRejTsapTask 1.3.6.1.4.1.231.2.17.5.20
The number of rejected tsap openings because of reached maximum for one task (see bcamTsapMaxTsapTask).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapRejCepTsap 1.3.6.1.4.1.231.2.17.5.21
The number of connection requests rejected because the maximum number of connections for this tsap has been reached (see bcamTsapMaxCepTsap).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamTsapTab 1.3.6.1.4.1.231.2.17.5.22
Table of all active TSAPs
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TsapEntry

bcamTsapTabEntry 1.3.6.1.4.1.231.2.17.5.22.1
Information about a current active TSAP
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TsapEntry  

bcamTsapTabNumbers 1.3.6.1.4.1.231.2.17.5.22.1.1
The definite identifier for this application. Even if the same application is disabled and then reenabled, the identfier will get a new value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabState 1.3.6.1.4.1.231.2.17.5.22.1.2
The current state of this application. opening (1) : the application enableing is in progress. open (2): the application is ready for requesting or accepting connections. closing (3): the termination of the application is in progress. closed (4): the application has been closed. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER opening(1), open(2), closing(3), closed(4), stopped(8)  

bcamTsapTabDuration 1.3.6.1.4.1.231.2.17.5.22.1.3
The time in seconds the application was enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamTsapTabDateApplEnable 1.3.6.1.4.1.231.2.17.5.22.1.4
The date of the application enableing. Format: YYYYMMDD
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

bcamTsapTabTimeApplEnable 1.3.6.1.4.1.231.2.17.5.22.1.5
The time of the application enableing. Format: HHMMSS
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(6)  

bcamTsapTabTypName 1.3.6.1.4.1.231.2.17.5.22.1.6
The type of name of this application. NeaName (1) : the name consists of 8 byte application name and 8 byte name of endsystem. SocketName (2) : the name consists of up to 32 byte socket name. IsoName (3) : the name consists of up to 78 byte iso name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER neaName(1), socketName(2), isoName(3)  

bcamTsapTabName 1.3.6.1.4.1.231.2.17.5.22.1.7
The name of this application according the type of the name (bcamTsapTabTypName).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..78)  

bcamTsapTabPortnumber 1.3.6.1.4.1.231.2.17.5.22.1.8
The port number used by this application (if known).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabOsiTsel 1.3.6.1.4.1.231.2.17.5.22.1.9
The OSI transport selector of this application (if known).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

bcamTsapTabNeaTsel 1.3.6.1.4.1.231.2.17.5.22.1.10
The NEA transport selector of this application (if known).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

bcamTsapTabHost 1.3.6.1.4.1.231.2.17.5.22.1.11
The name of the host in which the application resides.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

bcamTsapTabDiagnostic 1.3.6.1.4.1.231.2.17.5.22.1.12
The reason why the application was disabled (for diagnostic purposes only).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

bcamTsapTabTsduSends 1.3.6.1.4.1.231.2.17.5.22.1.13
The number of packets to send given to BCAM at the TSAP by this application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabByteSends 1.3.6.1.4.1.231.2.17.5.22.1.14
The number of bytes to send given to BCAM at the TSAP by this application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabTsduReceiveds 1.3.6.1.4.1.231.2.17.5.22.1.15
The number of packets received at the TSAP by this application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabByteReceiveds 1.3.6.1.4.1.231.2.17.5.22.1.16
The number of bytes received at the TSAP by this application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabSendCallOverMaxs 1.3.6.1.4.1.231.2.17.5.22.1.17
The number of send calls of this application while BCAM limits have been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabLetterTimeouts 1.3.6.1.4.1.231.2.17.5.22.1.18
The number of packets that were deleted without being delivered to the application due to timeout of the letter timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabInWaitBuck1Hist 1.3.6.1.4.1.231.2.17.5.22.1.19
The number of times the input wait time was in the time interval between zero and bcamGlobalInWaitLimit1 for meanwhile closed applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabInWaitBuck2Hist 1.3.6.1.4.1.231.2.17.5.22.1.20
The number of times the input wait time was in the time interval between bcamGlobalInWaitLimit1 and bcamGlobalInWaitLimit2 for meanwhile closed applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabInWaitBuck3Hist 1.3.6.1.4.1.231.2.17.5.22.1.21
The number of times the input wait time was in the time interval between bcamGlobalInWaitLimit2 and bcamGlobalInWaitLimit3 for meanwhile closed applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabInWaitBuck4Hist 1.3.6.1.4.1.231.2.17.5.22.1.22
The number of times the input wait time was in the time interval between bcamGlobalInWaitLimit3 and bcamGlobalInWaitLimit4 for meanwhile closed applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabInWaitBuck5Hist 1.3.6.1.4.1.231.2.17.5.22.1.23
The number of times the input wait time was longer than bcamGlobalInWaitLimit4 for meanwhile closed applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabReactBuck1Hist 1.3.6.1.4.1.231.2.17.5.22.1.24
The number of times the application reaction time was in the time interval between zero and bcamGlobalReactLimit1 for meanwhile closed applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabReactBuck2Hist 1.3.6.1.4.1.231.2.17.5.22.1.25
The number of times the application reaction time was in the time interval between bcamGlobalReactLimit1 and bcamGlobalReactLimit2 for meanwhile closed applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabReactBuck3Hist 1.3.6.1.4.1.231.2.17.5.22.1.26
The number of times the application reaction time was in the time interval between bcamGlobalReactLimit2 and bcamGlobalReactLimit3 for meanwhile closed applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabReactBuck4Hist 1.3.6.1.4.1.231.2.17.5.22.1.27
The number of times the application reaction time was in the time interval between bcamGlobalReactLimit3 and bcamGlobalReactLimit4 for meanwhile closed applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabReactBuck5Hist 1.3.6.1.4.1.231.2.17.5.22.1.28
The number of times the application reaction time was longer than bcamGlobalReactLimit4 for meanwhile closed applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabInWaitBuck1 1.3.6.1.4.1.231.2.17.5.22.1.29
The number of times the input wait time was in the time interval between zero and bcamGlobalInWaitLimit1 for opened applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabInWaitBuck2 1.3.6.1.4.1.231.2.17.5.22.1.30
The number of times the input wait time was in the time interval between bcamGlobalInWaitLimit1 and bcamGlobalInWaitLimit2 for opened applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabInWaitBuck3 1.3.6.1.4.1.231.2.17.5.22.1.31
The number of times the input wait time was in the time interval between bcamGlobalInWaitLimit2 and bcamGlobalInWaitLimit3 for opened applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabInWaitBuck4 1.3.6.1.4.1.231.2.17.5.22.1.32
The number of times the input wait time was in the time interval between bcamGlobalInWaitLimit3 and bcamGlobalInWaitLimit4 for opened applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabInWaitBuck5 1.3.6.1.4.1.231.2.17.5.22.1.33
The number of times the input wait time was longer than bcamGlobalInWaitLimit4 for opened applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabReactBuck1 1.3.6.1.4.1.231.2.17.5.22.1.34
The number of times the application reaction time was in the time interval between zero and bcamGlobalReactLimit1 for opened applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabReactBuck2 1.3.6.1.4.1.231.2.17.5.22.1.35
The number of times the application reaction time was in the time interval between bcamGlobalReactLimit1 and bcamGlobalReactLimit2 for opened applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabReactBuck3 1.3.6.1.4.1.231.2.17.5.22.1.36
The number of times the application reaction time was in the time interval between bcamGlobalReactLimit2 and bcamGlobalReactLimit3 for opened applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabReactBuck4 1.3.6.1.4.1.231.2.17.5.22.1.37
The number of times the application reaction time was in the time interval between bcamGlobalReactLimit3 and bcamGlobalReactLimit4 for opened applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabReactBuck5 1.3.6.1.4.1.231.2.17.5.22.1.38
The number of times the application reaction time was longer than bcamGlobalReactLimit4 for opened applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamTsapTabTsduSendHists 1.3.6.1.4.1.231.2.17.5.22.1.39
The number of packets to send given to BCAM at the TSAP by this application for meanwhile closed connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabByteSendHists 1.3.6.1.4.1.231.2.17.5.22.1.40
The number of bytes to send given to BCAM at the TSAP by this application for meanwhile closed connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabTsduReceivedHists 1.3.6.1.4.1.231.2.17.5.22.1.41
The number of packets received at the TSAP by this application for meanwhile closed connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabByteReceivedHists 1.3.6.1.4.1.231.2.17.5.22.1.42
The number of bytes received at the TSAP by this application for meanwhile closed connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabSendCallOverMaxHists 1.3.6.1.4.1.231.2.17.5.22.1.43
The number of send calls of this application while BCAM limits have been reached for meanwhile closed connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabLetterTimeoutHists 1.3.6.1.4.1.231.2.17.5.22.1.44
The number of packets that were deleted without being delivered to the application due to timeout of the letter timer for meanwhile closed connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabFunction 1.3.6.1.4.1.231.2.17.5.22.1.45
Interfacefunctionality of TSAP. nea (1) : functionality according proprietary NEA . iso (2) : functionality according ISO IS 8072. streams (3) : functionality according the one defined in the INTERNET.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nea(1), iso(2), streams(3)  

bcamTsapTabCurrConn 1.3.6.1.4.1.231.2.17.5.22.1.46
Number of connections of this TSAP not in the connection state closed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamTsapTabCloseConns 1.3.6.1.4.1.231.2.17.5.22.1.47
Number of connections of this TSAP that have been opened and are now in the connection state closing or closed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabClessSendBytes 1.3.6.1.4.1.231.2.17.5.22.1.48
Number of bytes sent connectionless by this application
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabClessRecvBytes 1.3.6.1.4.1.231.2.17.5.22.1.49
Number of bytes received connectionless by this application
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabClessSendCalls 1.3.6.1.4.1.231.2.17.5.22.1.50
Number of successful send calls for connectionless data
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabClessRecvCalls 1.3.6.1.4.1.231.2.17.5.22.1.51
Number of successful receive calls for connectionless data
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamTsapTabOutbufTsdu 1.3.6.1.4.1.231.2.17.5.22.1.52
The number of packets to send connectionoriented that are currently buffered by BCAM for this application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamTsapTabOutbufByte 1.3.6.1.4.1.231.2.17.5.22.1.53
The number of bytes to send connectionoriented that are currently buffered by BCAM for this application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamTsapTabInbufTsdu 1.3.6.1.4.1.231.2.17.5.22.1.54
The number of packets to receive connectionoriented that are currently buffered by BCAM for this application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamTsapTabInbufByte 1.3.6.1.4.1.231.2.17.5.22.1.55
The number of bytes to receive connectionoriented that are currently buffered by BCAM for this application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamTsapTabOutbufTsduCless 1.3.6.1.4.1.231.2.17.5.22.1.56
The number of packets to send connectionless that are currently buffered by BCAM for this application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamTsapTabOutbufByteCless 1.3.6.1.4.1.231.2.17.5.22.1.57
The number of bytes to send connectionless that are currently buffered by BCAM for this application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamTsapTabInbufTsduCless 1.3.6.1.4.1.231.2.17.5.22.1.58
The number of packets to receive connectionless that are currently buffered by BCAM for this application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamTsapTabInbufByteCless 1.3.6.1.4.1.231.2.17.5.22.1.59
The number of bytes to receive connectionless that are currently buffered by BCAM for this application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamTsapTabClessTimeout 1.3.6.1.4.1.231.2.17.5.22.1.60
The number of packets discarded because the datagram timer elapsed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamCepCurrent 1.3.6.1.4.1.231.2.17.6.1
The number of connections in the state open.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamCepClosed 1.3.6.1.4.1.231.2.17.6.2
The number of connections that had reached the state open and are now in the state closing or closed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamCepNotClosed 1.3.6.1.4.1.231.2.17.6.3
The number of connections in the states opening, open, or closing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamCepRerouting 1.3.6.1.4.1.231.2.17.6.4
The number of times an alternative route has been tried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamCepActiveTrials 1.3.6.1.4.1.231.2.17.6.5
The number of active trials of connection establishment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepActiveTrialFailures 1.3.6.1.4.1.231.2.17.6.6
The number of active trials of connection establishment that failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepPassiveTrials 1.3.6.1.4.1.231.2.17.6.7
The number of passive trials of connection establishment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepPassiveTrialFailures 1.3.6.1.4.1.231.2.17.6.8
The number of passive trials of connection establishment that failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepNumTable 1.3.6.1.4.1.231.2.17.6.9
The number of table entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamCepTab 1.3.6.1.4.1.231.2.17.6.10
Table of all active connections
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ConnEntry

bcamCepTabEntry 1.3.6.1.4.1.231.2.17.6.10.1
Information about a connection
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ConnEntry  

bcamCepTabProtocolClass 1.3.6.1.4.1.231.2.17.6.10.1.1
The protocol class used for this connection. local (1) : the partner application resides in the same host. nea (2) : the proprietary NEA protocol is used as transport protocol. iso (3) : the ISO protocol is used as transport protocol. tcp (4) : the TCP protocol is used as transport protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), nea(2), iso(3), tcp(4)  

bcamCepTabConnectionNumbers 1.3.6.1.4.1.231.2.17.6.10.1.2
The definite identifier for this connection. Even if a connection is closed and then reopened between the same applications, the identfier will get a new value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabDisconCommand 1.3.6.1.4.1.231.2.17.6.10.1.3
First word that contains the reason for the closing of the connection (for diagnostic purposes only).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

bcamCepTabDisconInfoWord 1.3.6.1.4.1.231.2.17.6.10.1.4
Second word that contains the reason for the closing of the connection (for diagnostic purposes only).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

bcamCepTabTsduSends 1.3.6.1.4.1.231.2.17.6.10.1.5
The number of packets to send given to BCAM at the TSAP for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabByteSends 1.3.6.1.4.1.231.2.17.6.10.1.6
The number of bytes to send given to BCAM at the TSAP for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabTsduReceiveds 1.3.6.1.4.1.231.2.17.6.10.1.7
The number of packets received by BCAM for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabByteReceiveds 1.3.6.1.4.1.231.2.17.6.10.1.8
The number of bytes received by BCAM for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabSendCallOverMaxs 1.3.6.1.4.1.231.2.17.6.10.1.9
The number of send calls at the TSAP for this connection when connection specific limits have been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabLetterTimeouts 1.3.6.1.4.1.231.2.17.6.10.1.10
The number of packets that have been deleted without delivering to the application due to the timeout of the letter timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabOutbufTsduSend 1.3.6.1.4.1.231.2.17.6.10.1.11
The number of packets to send that are currently buffered by BCAM for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamCepTabOutbufByteSend 1.3.6.1.4.1.231.2.17.6.10.1.12
The number of bytes to send that are currently buffered by BCAM for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamCepTabOutbufMaxTsduSend 1.3.6.1.4.1.231.2.17.6.10.1.13
The maximum number of packets to send that will be buffered by BCAM for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamCepTabOutbufMaxByteSend 1.3.6.1.4.1.231.2.17.6.10.1.14
The maximum number of bytes to send that will be buffered by BCAM for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamCepTabInbufTsdu 1.3.6.1.4.1.231.2.17.6.10.1.15
The number of packets to receive that are currently buffered by BCAM for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamCepTabInbufByte 1.3.6.1.4.1.231.2.17.6.10.1.16
The number of bytes to receive that are currently buffered by BCAM for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamCepTabInbufMaxTsduReceived 1.3.6.1.4.1.231.2.17.6.10.1.17
The maximum number of packets to receive that will be buffered by BCAM for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamCepTabInbufMaxByteReceived 1.3.6.1.4.1.231.2.17.6.10.1.18
The maximum number of bytes to receive that will be buffered by BCAM for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamCepTabPacketsDataSends 1.3.6.1.4.1.231.2.17.6.10.1.19
The number of packets sent by BCAM that contained at least one byte of user data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabPacketsWindowSends 1.3.6.1.4.1.231.2.17.6.10.1.20
The number of packets sent by BCAM that contained only window information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabPacketsDataReceiveds 1.3.6.1.4.1.231.2.17.6.10.1.21
The number of packets received by BCAM that contained at least one byte of user data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabPacketsWindowReceiveds 1.3.6.1.4.1.231.2.17.6.10.1.22
The number of packets received by BCAM that contained only window information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabGlobalZeroWindowSends 1.3.6.1.4.1.231.2.17.6.10.1.23
The number of packets sent by BCAM that contained zero window due to global shortage of ressources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabConnectionZeroWindowSends 1.3.6.1.4.1.231.2.17.6.10.1.24
The number of packets sent by BCAM that contained zero window due to shortage of connection specific ressources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabZeroWindowReceiveds 1.3.6.1.4.1.231.2.17.6.10.1.25
The number of packets received that contained zero window.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabRoundTripTime 1.3.6.1.4.1.231.2.17.6.10.1.26
The round trip time for this connection in milliseconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabRetransmitPacketsSends 1.3.6.1.4.1.231.2.17.6.10.1.27
The number of packets sent that contain at least one byte of data that have been already sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabDetectedGapsReceiveds 1.3.6.1.4.1.231.2.17.6.10.1.28
The number of packets received where there is a gap between the highest already received byte and the lowest byte in the packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabDuplicatePacketsReceiveds 1.3.6.1.4.1.231.2.17.6.10.1.29
The number of packets received that contain at least one byte of user data which has already been received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabErrorPacketsReceiveds 1.3.6.1.4.1.231.2.17.6.10.1.30
The number of packets received that were discarded because of weak protocol violations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamCepTabConnectionState 1.3.6.1.4.1.231.2.17.6.10.1.31
The current state of the connection. opening (1) : the connection establishment is in progress. open (2) : the connection is ready for data transfer. closing (3) : the connection is terminating. closed (4) : the connection has been closed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER opening(1), open(2), closing(3), closed(4)  

bcamCepTabApplicationNumber 1.3.6.1.4.1.231.2.17.6.10.1.32
The definite identifier of the local application the connection belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamCepTabRouteNumber 1.3.6.1.4.1.231.2.17.6.10.1.33
The definite identifier of the route that is used for the connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamCepTabDuration 1.3.6.1.4.1.231.2.17.6.10.1.34
The time the connection was in the state open.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamCepTabDateConnectionEstablishment 1.3.6.1.4.1.231.2.17.6.10.1.35
The date of the connection establishment. Format: YYYYMMDD
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

bcamCepTabTimeConnectionEstablishment 1.3.6.1.4.1.231.2.17.6.10.1.36
The time of the connection establishment. Format: HHMMSS
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(6)  

bcamCepTabTypPartnerName 1.3.6.1.4.1.231.2.17.6.10.1.37
The type of name used for the partner application. neaName (1) : the name consists of 8 byte application name and 8 byte name of endsystem. socketName (2) : the name consists of up to 32 byte socket name. isoName (3) : the name consists of up to 78 byte iso name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER neaName(1), socketName(2), isoName(3)  

bcamCepTabPartnerName 1.3.6.1.4.1.231.2.17.6.10.1.38
The name of the partner application according the type of the name (bcamCepTabTypPartnerName).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..78)  

bcamCepTabLocalName 1.3.6.1.4.1.231.2.17.6.10.1.39
The name of the local application according the type of the name (bcamCepTabTypPartnerName).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..78)  

bcamCepTabTypeL4Addr 1.3.6.1.4.1.231.2.17.6.10.1.40
The type of layer 4 addresses used for this connection. portNumber (1) : the address consists of 2 byte port number. neaTsel (2) : the address consists of 8 byte NEA transport selector. osiTsel (3) : the address consists of up to 33 byte OSI transport selector.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER portNumber(1), neaTsel(2), osiTsel(3)  

bcamCepTabL4AddrPartner 1.3.6.1.4.1.231.2.17.6.10.1.41
The layer 4 address of the partner application according the type of the address (bcamCepTabTypeL4Addr).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

bcamCepTabL4AddrLocal 1.3.6.1.4.1.231.2.17.6.10.1.42
The layer 4 address of the partner application according the type of the address (bcamCepTabTypeL4Addr).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

bcamCepTabPartnerEndsystem 1.3.6.1.4.1.231.2.17.6.10.1.43
The name of the host where the partner application resides.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

bcamCepTabInWaitBuck1 1.3.6.1.4.1.231.2.17.6.10.1.44
The number of times the input wait time was in the time interval between zero and bcamGlobalInWaitLimit1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabInWaitBuck2 1.3.6.1.4.1.231.2.17.6.10.1.45
The number of times the input wait time was in the time interval between bcamGlobalInWaitLimit1 and bcamGlobalInWaitLimit2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabInWaitBuck3 1.3.6.1.4.1.231.2.17.6.10.1.46
The number of times the input wait time was in the time interval between bcamGlobalInWaitLimit2 and bcamGlobalInWaitLimit3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabInWaitBuck4 1.3.6.1.4.1.231.2.17.6.10.1.47
The number of times the input wait time was in the time interval between bcamGlobalInWaitLimit3 and bcamGlobalInWaitLimit4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabInWaitBuck5 1.3.6.1.4.1.231.2.17.6.10.1.48
The number of times the input wait time was longer than bcamGlobalInWaitLimit4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabReactBuck1 1.3.6.1.4.1.231.2.17.6.10.1.49
The number of times the application reaction time was in the time interval between zero and bcamGlobalReactLimit1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabReactBuck2 1.3.6.1.4.1.231.2.17.6.10.1.50
The number of times the application reaction time was in the time interval between bcamGlobalReactLimit1 and bcamGlobalReactLimit2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabReactBuck3 1.3.6.1.4.1.231.2.17.6.10.1.51
The number of times the application reaction time was in the time interval between bcamGlobalReactLimit2 and bcamGlobalReactLimit3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabReactBuck4 1.3.6.1.4.1.231.2.17.6.10.1.52
The number of times the application reaction time was in the time interval between bcamGlobalReactLimit3 and bcamGlobalReactLimit4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabReactBuck5 1.3.6.1.4.1.231.2.17.6.10.1.53
The number of times the application reaction time was longer than bcamGlobalReactLimit4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabOutProcBuck1 1.3.6.1.4.1.231.2.17.6.10.1.54
The number of times the outbound processing time was in the time interval between zero and bcamGlobalOutProcLimit1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabOutProcBuck2 1.3.6.1.4.1.231.2.17.6.10.1.55
The number of times the outbound processing time was in the time interval between bcamGlobalOutProcLimit1 and bcamGlobalOutProcLimit2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabOutProcBuck3 1.3.6.1.4.1.231.2.17.6.10.1.56
The number of times the outbound processing time was in the time interval between bcamGlobalOutProcLimit2 and bcamGlobalOutProcLimit3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabOutProcBuck4 1.3.6.1.4.1.231.2.17.6.10.1.57
The number of times the outbound processing time was in the time interval between bcamGlobalOutProcLimit3 and bcamGlobalOutProcLimit4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabOutProcBuck5 1.3.6.1.4.1.231.2.17.6.10.1.58
The number of times the outbound processing time was longer than bcamGlobalOutProcLimit4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabInProcBuck1 1.3.6.1.4.1.231.2.17.6.10.1.59
The number of times the inbound processing time was in the time interval between zero and bcamGlobalInProcLimit1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabInProcBuck2 1.3.6.1.4.1.231.2.17.6.10.1.60
The number of times the inbound processing time was in the time interval between bcamGlobalInProcLimit1 and bcamGlobalInProcLimit2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabInProcBuck3 1.3.6.1.4.1.231.2.17.6.10.1.61
The number of times the inbound processing time was in the time interval between bcamGlobalInProcLimit2 and bcamGlobalInProcLimit3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabInProcBuck4 1.3.6.1.4.1.231.2.17.6.10.1.62
The number of times the inbound processing time was in the time interval between bcamGlobalInProcLimit3 and bcamGlobalInProcLimit4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabInProcBuck5 1.3.6.1.4.1.231.2.17.6.10.1.63
The number of times the inbound processing time was longer than bcamGlobalInProcLimit4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamCepTabMaxSendLen 1.3.6.1.4.1.231.2.17.6.10.1.64
The maximum number of bytes per send call that can be given to BCAM at the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamCepTabMaxIndLen 1.3.6.1.4.1.231.2.17.6.10.1.65
The maximum number of bytes BCAM will announce per data indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamCepTabLocalEndsystem 1.3.6.1.4.1.231.2.17.6.10.1.66
The name of the host where the local application resides.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

bcamRouteNumTable 1.3.6.1.4.1.231.2.17.7.1
The number of all routes known by BCAM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteActive 1.3.6.1.4.1.231.2.17.7.2
The number of active routes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteArpDefault 1.3.6.1.4.1.231.2.17.7.3
The ARP state to use as default when a route of type node (bcamRouteTabTyp) is activated. Several bits may be set simultaneous. off (1) : No usage of ARP. on (2) : periodic usage of ARP. quiet (4) : ARP will only be used if no connection oriented data were transferred during the last ARP period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2), quiet(4)  

bcamRouteRoutingReqIp 1.3.6.1.4.1.231.2.17.7.4
The number of forwarding requests for IP
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteRoutingReqIso 1.3.6.1.4.1.231.2.17.7.5
The number of forwarding requests for ISO
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteRoutingReqNea 1.3.6.1.4.1.231.2.17.7.6
The number of forwarding requests for NEA
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteSuccRoutingReqIp 1.3.6.1.4.1.231.2.17.7.7
The number of successful forwarding requests for IP
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteSuccRoutingReqIso 1.3.6.1.4.1.231.2.17.7.8
The number of successful forwarding requests for ISO
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteSuccRoutingReqNea 1.3.6.1.4.1.231.2.17.7.9
The number of successful forwarding requests for NEA
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTab 1.3.6.1.4.1.231.2.17.7.10
Table of all Routes
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RoutEntry

bcamRouteTabEntry 1.3.6.1.4.1.231.2.17.7.10.1
Information about a route
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RoutEntry  

bcamRouteTabNumbers 1.3.6.1.4.1.231.2.17.7.10.1.1
The definite identifier for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamRouteTabName 1.3.6.1.4.1.231.2.17.7.10.1.2
The name of this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

bcamRouteTabNumNeaConn 1.3.6.1.4.1.231.2.17.7.10.1.3
The current number of NEA connections using this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamRouteTabNumIsoConn 1.3.6.1.4.1.231.2.17.7.10.1.4
The current number of ISO and TCP connections using this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamRouteTabMaxNeaConn 1.3.6.1.4.1.231.2.17.7.10.1.5
The maximum number of NEA connections allowed for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamRouteTabMaxIsoConn 1.3.6.1.4.1.231.2.17.7.10.1.6
The maximum number of ISO and TCP connections allowed for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamRouteTabBadNeaElems 1.3.6.1.4.1.231.2.17.7.10.1.7
The number of erroneous NEA fragments received on this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamRouteTabBadIsoElems 1.3.6.1.4.1.231.2.17.7.10.1.8
The number of erroneous ISO and TCP fragments received on this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamRouteTabMaxL4Conn 1.3.6.1.4.1.231.2.17.7.10.1.9
The maximum number of layer 4 connections per layer 3 connection for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamRouteTabMaxUnackTpdu 1.3.6.1.4.1.231.2.17.7.10.1.10
The maximum number of unacknowledged TPDUs per layer 3 connection that may be sent over this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamRouteTabRouteNetTyp 1.3.6.1.4.1.231.2.17.7.10.1.11
Describes whether there are other intermediate routes necessary to be known by BCAM to reach the system described by this route. gatewayRouter (1) : the system is reached via a gateway route. neaRouter (2) : the system is reached via a NEA router route. intfIpRouter (4) : the system is reached via an INTF or IP router route. int0Router (8) : the system is reached via an INT0 router route. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER gatewayRouter(1), neaRouter(2), intfIpRouter(4), int0Router(8)  

bcamRouteTabNumberIsoIpRouter 1.3.6.1.4.1.231.2.17.7.10.1.12
The number of the route which describes the INT0, INTF or IP router used to reach the system described by this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabNumberNeaRouter 1.3.6.1.4.1.231.2.17.7.10.1.13
The number of the route which describes the NEA router used to reach the system described by this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabNumberGateway 1.3.6.1.4.1.231.2.17.7.10.1.14
The number of the route which describes the gateway used to reach the system described by this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabFunction 1.3.6.1.4.1.231.2.17.7.10.1.15
Describes the function of the route: onlyServerAccess (1) : the route is used for access to a specified server port only. transportRoute (2) : the route leads to an endsystem Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER onlyServerAccess(1), transportRoute(2)  

bcamRouteTabProcNetTyp 1.3.6.1.4.1.231.2.17.7.10.1.16
Describes whether there are other intermediate systems necessary to be known by BCAM to reach the system described by this route. gatewayProc (1) : an intermediate gateway system is used. neaProc (2) : an intermediate NEA system is used. isoIpProc (4) : an intermediate ISO or IP system is used. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER gatewayProc(1), neaProc(2), isoIpProc(4)  

bcamRouteTabMaxTsduLen 1.3.6.1.4.1.231.2.17.7.10.1.17
The maximum length of packets that can be sent over this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamRouteTabNameEndsystem 1.3.6.1.4.1.231.2.17.7.10.1.18
The name of the remote system described by this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

bcamRouteTabIso4WindowTimer 1.3.6.1.4.1.231.2.17.7.10.1.19
The current value of the window timer for this route in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamRouteTabIso4RetransTimer 1.3.6.1.4.1.231.2.17.7.10.1.20
The current value of the retransmit timer for this route in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamRouteTabAckTimer 1.3.6.1.4.1.231.2.17.7.10.1.21
The current value of the acknowledgement timer for this route in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamRouteTabErrorRecovTimer 1.3.6.1.4.1.231.2.17.7.10.1.22
The current value of the error recovery timer for this route in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamRouteTabRejectTimer 1.3.6.1.4.1.231.2.17.7.10.1.23
The current value of the reject timer for this route in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamRouteTabExpedRetransTimer 1.3.6.1.4.1.231.2.17.7.10.1.24
The current value of the expedited retransmit timer for this route in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bcamRouteTabNameGateway 1.3.6.1.4.1.231.2.17.7.10.1.25
The name of the intermediate system where protocol transitions, if necessary for this route, are done.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

bcamRouteTabNameX25Station 1.3.6.1.4.1.231.2.17.7.10.1.26
The name of the station which performs the X25 net access.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

bcamRouteTabL3InputProfil 1.3.6.1.4.1.231.2.17.7.10.1.27
The input profile used on the network layer. nea (1) : proprietary NEAN protocol. int0 (2) : protocol according ISO 8473 (inactive network layer). intf (3) : protocol according ISO 8473. gateway (4) : no network layer protocol used. ip (5) : proctocol according RFC 791.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nea(1), int0(2), intf(3), gateway(4), ip(5)  

bcamRouteTabTransState 1.3.6.1.4.1.231.2.17.7.10.1.28
The current transfer state of this route as viewed by transport layer. notReady (4) : no packets can be sent. waitForTransferInit (1) : route may be initialised. waitForReadyToTransfer (2) : address resolution running ready (3) : packets may be sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER waitForTransferInit(1), waitForReadyToTransfer(2), ready(3), notReady(4)  

bcamRouteTabOption 1.3.6.1.4.1.231.2.17.7.10.1.29
The currently valid options for this route (only valid for TCP). delayedAckAllowed (1) : do not try do minimize the number of outgoing acknowledgements optimalSegmentSizeOn (2) : do not try do minimize the number of incoming acknowledgements Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER delayedAckAllowed(1), optimalSegmentSizeOn(2)  

bcamRouteTabTyp 1.3.6.1.4.1.231.2.17.7.10.1.30
Describes how the remote system described by this route is reached. direct (1) : the remote system is connected directly to the local system (e.g via DAST). remote (2) : the remote system is reached via at least one router. node (3) : the remote system is connected directly to ethernet or fddi node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER direct(1), remote(2), node(3)  

bcamRouteTabUsage 1.3.6.1.4.1.231.2.17.7.10.1.31
Describes whether this route describes an intermediate system. noIntermediate (16) : no intermediate route gatewayRouter (1) : route describes an intermediate system used as gateway intfIpRouter (2) : route describes an INTF or an IP router neaRouter (4) : route describes a NEA router int0Router (8) : route describes an INT0 router Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER gatewayRoute(1), intfIpRouter(2), neaRouter(4), int0Router(8), noIntermediate(16)  

bcamRouteTabL3Subprofile 1.3.6.1.4.1.231.2.17.7.10.1.32
rfc1042 (1) : a layer 3 subprotocol according RFC1042 is used on this route. netConnLess (2) : a connectionless layer 3 protocol is used on this route. neaNetConn (4) : a NEA net connection is used on this route. neattNetConn (8) : a NEATT net connection is used on this route. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rfc1042(1), netConnLess(2), neaNetConn(4), neattNetConn(8)  

bcamRouteTabCommandState 1.3.6.1.4.1.231.2.17.7.10.1.33
The current state of this route caused by route specific commands. included (1) : a BCIN command was given successfully for this route. active (2) : a BCACT command was given successfully for this route. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER included(1), active(2)  

bcamRouteTabChangeState 1.3.6.1.4.1.231.2.17.7.10.1.34
Describes how the route was defined or modified. generated (16) : the route has been defined by KOGS and not been modified. dynamic (1) : the route was created dynamically by a BCIN command. defByProtocol (2) : the route was defined by routing protocol. switchByProtocol (4) : the route has been switched by routing protocol. changed (8) : the route has been modified. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), defByProtocol(2), switchByProtocol(4), changed(8), generated(16)  

bcamRouteTabIso9542 1.3.6.1.4.1.231.2.17.7.10.1.35
Describes the ISO9542 processing, if this route is an INTF route eshReceived (1) : endsystem hello received ishReceived (2) : intermediate system hello received. iso8473QueryReceived (4) : ISO 8473 query configuration request received. refreshRequired (8) : refreshing of routing information is required. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER eshReceived(1), ishReceived(2), iso8473QueryReceived(4), refreshRequired(8)  

bcamRouteTabMaxNetLength 1.3.6.1.4.1.231.2.17.7.10.1.36
The maximum length of a packet used on layer 3 (only valid for FDDI routes). ethernet (1) : the length will be limited to the maximum length for ethernet. fddi (2) : the length will be limited to the maximum length for FDDI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ethernet(1), fddi(2)  

bcamRouteTabState2 1.3.6.1.4.1.231.2.17.7.10.1.37
Describes the state of the route viewed by routing protocols. silent (16) : route not yet or no more used. testing (1) : delivery problems on route detected. working (2) : route working. waitAddressResolution (4) : waiting for address resolution. lifetimeSupervsionFailed (8) : lifetime supervision failed. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER testing(1), working(2), waitAddrResolution(4), lifeSupervisionFailed(8), silent(16)  

bcamRouteTabDeactReason 1.3.6.1.4.1.231.2.17.7.10.1.38
The reason for the deactivation of the route. flush (1) : an ISO9542 protocol element that requests the invalidation of the routing information has been received. supposedDown (2) : the route is supposed to be down (derived from state of TCP protocol machine or ICMP message received). noArpReply (4) : no arp reply has been received. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER flush(1), supposedDown(2), noArpReply(4)  

bcamRouteTabSwitchType 1.3.6.1.4.1.231.2.17.7.10.1.39
The type of the last performed route switching. localRemote (1) : the route has been changed from local to remote route. remoteLocal (2) : the route has been changed from remote to local route. remoteRemote (4) : the route has been changed from remote to remote route. lsapChanged (8) : the route has been switched to another LSAPCB. lanAddrChanged (16) : the lan address of the route has been changed. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER localRemote(1), remoteLocal(2), remoteRemote(4), lsapChanged(8), lanAddrChanged(16)  

bcamRouteTabReasonCreation 1.3.6.1.4.1.231.2.17.7.10.1.40
Describes the reason for the automatic creation of the route. incomingData (1) : the route has been created because of incoming data. outgoingData (2) : the route has been created because of outgoing data. routingProtocol (4) : the route has been created because of incoming routing protocol. routingData (8) : the route has been created because of data to be routed. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER incomingData(1), outgoingData(2), routingProtocol(4), routingData(8)  

bcamRouteTabOrigLanAddress 1.3.6.1.4.1.231.2.17.7.10.1.41
The MAC address (if known) of the remote endsystem or the first intermediate system of this route as used when the route has been created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamRouteTabLanAddress 1.3.6.1.4.1.231.2.17.7.10.1.42
The current MAC address (if known) of the remote endsystem or the first intermediate system of this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamRouteTabTypAddress 1.3.6.1.4.1.231.2.17.7.10.1.43
The type of address used for this route. nea (1) : 2 byte (processor number and region number) intf (2) : up to 20 byte full internet address streams (3) : 4 byte IP address int0 (4) : 6 byte MAC address
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nea(1), intf(2), streams(3), int0(4)  

bcamRouteTabLocalAddr 1.3.6.1.4.1.231.2.17.7.10.1.44
The layer 3 address of the local system described by this route according to bcamRouteTabTypAddress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

bcamRouteTabRemoteAddr 1.3.6.1.4.1.231.2.17.7.10.1.45
The layer 3 address of the remote system described by this route according to bcamRouteTabTypAddress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

bcamRouteTabOutPacketsDatas 1.3.6.1.4.1.231.2.17.7.10.1.46
The number of packets sent over this route that contained at least one byte of user data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamRouteTabOutPacketsFlowControls 1.3.6.1.4.1.231.2.17.7.10.1.47
The number of packets sent over this route that contained only flow control information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamRouteTabInPacketsDatas 1.3.6.1.4.1.231.2.17.7.10.1.48
The number of packets received on this route that contained at least one byte of user data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamRouteTabInPacketsFlowControls 1.3.6.1.4.1.231.2.17.7.10.1.49
The number of packets received on this route that contained only flow control information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamRouteTabOutRetransPackets 1.3.6.1.4.1.231.2.17.7.10.1.50
The number of packets sent over this route that contained at least one byte of user data that were already sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamRouteTabInDetectedGaps 1.3.6.1.4.1.231.2.17.7.10.1.51
The number of packets received where there was a gap between the highest already received byte and the lowest byte in the packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamRouteTabInDuplicatedPackets 1.3.6.1.4.1.231.2.17.7.10.1.52
The number of packets received that contained at least one byte of user data that has already been received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamRouteTabInIncorrectPackets 1.3.6.1.4.1.231.2.17.7.10.1.53
The number of erroneous packets received on this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamRouteTabRoundTripTimeClosed 1.3.6.1.4.1.231.2.17.7.10.1.54
The average round trip time on this route for meanwhile closed connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabRoundTripTimeCurrent 1.3.6.1.4.1.231.2.17.7.10.1.55
The average round trip time on this route for currently open connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabArpReqSend 1.3.6.1.4.1.231.2.17.7.10.1.56
The number of ARP requests sent for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabArpRepSend 1.3.6.1.4.1.231.2.17.7.10.1.57
The number of ARP replies sent for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabArpReqRec 1.3.6.1.4.1.231.2.17.7.10.1.58
The number of ARP requests received for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabArpRepRec 1.3.6.1.4.1.231.2.17.7.10.1.59
The number of ARP replies received for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabIcmpReq 1.3.6.1.4.1.231.2.17.7.10.1.60
The number of ICMP ECHO requests sent for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabIcmpReply 1.3.6.1.4.1.231.2.17.7.10.1.61
The number of ICMP ECHO replies received for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabIcmpRedirect 1.3.6.1.4.1.231.2.17.7.10.1.62
The number of ICMP redirects received for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabSwitched 1.3.6.1.4.1.231.2.17.7.10.1.63
The number of route switchings performed for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabDown 1.3.6.1.4.1.231.2.17.7.10.1.64
The number of times the state of the route has changed to not working.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabOspfHello 1.3.6.1.4.1.231.2.17.7.10.1.65
The number of OSPF HELLOs received for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabPacketNoConn 1.3.6.1.4.1.231.2.17.7.10.1.66
The number of packets received on this route that could not be assigned to a connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabPacketInternDiscon 1.3.6.1.4.1.231.2.17.7.10.1.67
The number of packets received on this route that resulted in an abortion of a connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabPacketBadProtocol 1.3.6.1.4.1.231.2.17.7.10.1.68
The number of packets received on this route that were invalid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabConnReqOut 1.3.6.1.4.1.231.2.17.7.10.1.69
The number of connection requests sent on this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabConnReqOutAck 1.3.6.1.4.1.231.2.17.7.10.1.70
The number of connection requests sent on this route that have been acknowledeged by the remote transport system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabConnReqOutRej 1.3.6.1.4.1.231.2.17.7.10.1.71
The number of connection requests sent on this route that have been rejected by the remote transport system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabConnReqIn 1.3.6.1.4.1.231.2.17.7.10.1.72
The number of connection requests received on this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabConnReqInAck 1.3.6.1.4.1.231.2.17.7.10.1.73
The number of connection requests received on this route that have been acknowledged by the local transport system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabConnReqInRej 1.3.6.1.4.1.231.2.17.7.10.1.74
The number of connection requests received on this route that have been rejected by the local transport system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabDisconnOut 1.3.6.1.4.1.231.2.17.7.10.1.75
The number of disconnect requests sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabDisconnOutAck 1.3.6.1.4.1.231.2.17.7.10.1.76
The number of disconnect requests sent that have been acknowledged by the remote transport system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabDisconnIn 1.3.6.1.4.1.231.2.17.7.10.1.77
The number of disconnect requests received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

bcamRouteTabDisconnInAck 1.3.6.1.4.1.231.2.17.7.10.1.78
The number of disconnect requests received that have been acknowledged by the local transport system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  


bcamRouteTabArpFlag 1.3.6.1.4.1.231.2.17.7.10.1.80
The ARP state of the route. off (1) : no usage of ARP. on (2) : periodic usage of ARP. quiet (4) : ARP will only be used if no connection oriented data were transferred during the last ARP period. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2), quiet(4)  

bcamRouteTabNsduLen 1.3.6.1.4.1.231.2.17.7.10.1.81
The length of a network service data unit used on this route
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabMinNsduLen 1.3.6.1.4.1.231.2.17.7.10.1.82
The minimum maximal length of a network service data unit used on this route
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouteTabMaxNsduLen 1.3.6.1.4.1.231.2.17.7.10.1.83
The maximum maximal length of a network service data unit used on this route
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamIfNumTable 1.3.6.1.4.1.231.2.17.8.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamIfTab 1.3.6.1.4.1.231.2.17.8.2
Table of all interfaces
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LinkEntry

bcamIfTabEntry 1.3.6.1.4.1.231.2.17.8.2.1
Information about an interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LinkEntry  

bcamIfTabNumbers 1.3.6.1.4.1.231.2.17.8.2.1.1
A definite identifier for the interface. Serves for references from other tables
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamIfTabName 1.3.6.1.4.1.231.2.17.8.2.1.2
The name of this interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

bcamIfTabProfile 1.3.6.1.4.1.231.2.17.8.2.1.3
The layer 2 profile of this interface nealkp (1) : proprietary link protocol with permanent dialog. nealke (2) : proprietary event driven link protocol to BS2000 system. nealkeS (3) : proprietary event driven link protocol to System 6000. nealkh (4) : a HDLC balanced link protocol (duplex mode). llc1 (5) : CSMA/CD link protocol. sinix (6) : proprietary link protocol to SINIX port. fddi (7) : FDDI link protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nealkp(1), nealke(2), nealkeS(3), nealkh(4), llc1(5), sinix(6), fddi(7)  

bcamIfTabMnemonicWrite 1.3.6.1.4.1.231.2.17.8.2.1.4
The device mnemonic for write operations
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(4)  

bcamIfTabMnemonicRead 1.3.6.1.4.1.231.2.17.8.2.1.5
The device mnemonic for read operations
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(4)  

bcamIfTabLanAddress 1.3.6.1.4.1.231.2.17.8.2.1.6
The MAC address (if supported)
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabConfigUpdate 1.3.6.1.4.1.231.2.17.8.2.1.7
Describes whether assigned routes are allowed to be switched from this to an alternative interface. updateAllowed (4) : switching allowed updateForbidden (1) : switching forbidden primaryRequested (2) : switch back of all routes original assigned to this interface requested Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER updateForbidden(1), primaryRequested(2), updateAllowed(4)  

bcamIfTabMaxLpdu 1.3.6.1.4.1.231.2.17.8.2.1.8
The maximum length of a link protocol data unit depending on bcamIfTabProfile. ethernet (1514) : 1514 bytes fddi (4494) : 4494 bytes atm (65535) : 65535 bytes nealkh (65549) : 65549 bytes nealkp (4113) : 4113 bytes maxReass (16392) : 16392 bytes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ethernet(1514), fddi(4494), atm(65535), nealkh(65549), nealkp(4113), maxReass(16392)  

bcamIfTabL2Monitoring 1.3.6.1.4.1.231.2.17.8.2.1.9
The state of the layer 2 monitoring. on (1) : layer 2 monitoring is running. off (2) : layer 2 monitoring is not running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

bcamIfTabDevice 1.3.6.1.4.1.231.2.17.8.2.1.10
Describes whether the interface is an ESCON channel to channel adapter. esconCtc (1) : the interface is an ESCON channel to channel adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER esconCtc(1)  

bcamIfTabAdminState 1.3.6.1.4.1.231.2.17.8.2.1.11
The administrative state of this interface requested by commands. excluded (4) : no BCIN command given included (1) : BCIN command given active (2) : BCACT command given
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER included(1), active(2), excluded(4)  

bcamIfTabCurrentState 1.3.6.1.4.1.231.2.17.8.2.1.12
The actual working state of this interface none (8) : interface not working waitForAct (1) : activation in progress working (2) : interface working waitForDeact (4) : deactivation in progress Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER waitForAct(1), working(2), waitForDeact(4), none(8)  

bcamIfTabMode 1.3.6.1.4.1.231.2.17.8.2.1.13
Describes the operational parameters of this interface stopModeOn (16) : stop PDN in case of abnormal deactivation slowPollOn (8) : automatic reactivation shall be tried shortWaitOn (4) : stop activation after timeout multicastOn (2) : evaluate multicasts broadcastOn (1) : evaluate broadcasts Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER stopModeOn(16), slowPollOn(8), shortWaitOn(4), multicastOn(2), broadcastOn(1)  

bcamIfTabPortName 1.3.6.1.4.1.231.2.17.8.2.1.14
The port name of this interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

bcamIfTabLenTraceOut 1.3.6.1.4.1.231.2.17.8.2.1.15
The maximum length of layer 2 data to be traced in a trace entry for output.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4096  

bcamIfTabLenTraceIn 1.3.6.1.4.1.231.2.17.8.2.1.16
The maximum length of layer 2 data to be traced in a trace entry for input.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4096  

bcamIfTabNumRouteSwitchings 1.3.6.1.4.1.231.2.17.8.2.1.17
The number of route switchings performed for this interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamIfTabTimeLastChange 1.3.6.1.4.1.231.2.17.8.2.1.18
The time interval (in seconds) since the last change of the working state of this interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamIfTabMnemonicDiag 1.3.6.1.4.1.231.2.17.8.2.1.19
The device mnemonic for diagnosis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(4)  

bcamIfTabNumMulticastAddr 1.3.6.1.4.1.231.2.17.8.2.1.20
The number of multicast addresses enabled for this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamIfTabMulticastAddr1 1.3.6.1.4.1.231.2.17.8.2.1.21
multicast address 1 or zero
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabMulticastAddr2 1.3.6.1.4.1.231.2.17.8.2.1.22
multicast address 2
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabMulticastAddr3 1.3.6.1.4.1.231.2.17.8.2.1.23
multicast address 3
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabMulticastAddr4 1.3.6.1.4.1.231.2.17.8.2.1.24
multicast address 4
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabMulticastAddr5 1.3.6.1.4.1.231.2.17.8.2.1.25
multicast address 5
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabMulticastAddr6 1.3.6.1.4.1.231.2.17.8.2.1.26
multicast address 6
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabMulticastAddr7 1.3.6.1.4.1.231.2.17.8.2.1.27
multicast address 7
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabMulticastAddr8 1.3.6.1.4.1.231.2.17.8.2.1.28
multicast address 8
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabMulticastAddr9 1.3.6.1.4.1.231.2.17.8.2.1.29
multicast address 9
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabMulticastAddr10 1.3.6.1.4.1.231.2.17.8.2.1.30
multicast address 10
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabNumNeaAddress 1.3.6.1.4.1.231.2.17.8.2.1.31
The number of NEA addresses enabled for this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamIfTabNeaAddress1 1.3.6.1.4.1.231.2.17.8.2.1.32
NEA address 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

bcamIfTabNeaAddress2 1.3.6.1.4.1.231.2.17.8.2.1.33
NEA address 2
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

bcamIfTabNeaAddress3 1.3.6.1.4.1.231.2.17.8.2.1.34
NEA address 3
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

bcamIfTabNeaAddress4 1.3.6.1.4.1.231.2.17.8.2.1.35
NEA address 4
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

bcamIfTabNeaAddress5 1.3.6.1.4.1.231.2.17.8.2.1.36
NEA address 5
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

bcamIfTabNeaAddress6 1.3.6.1.4.1.231.2.17.8.2.1.37
NEA address 6
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

bcamIfTabNumIpAddress 1.3.6.1.4.1.231.2.17.8.2.1.38
The number of IP addresses enabled for this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamIfTabIpAddress1 1.3.6.1.4.1.231.2.17.8.2.1.39
IP address 1 or zero
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bcamIfTabIpAddress2 1.3.6.1.4.1.231.2.17.8.2.1.40
IP address 2
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bcamIfTabIpAddress3 1.3.6.1.4.1.231.2.17.8.2.1.41
IP address 3
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bcamIfTabIpAddress4 1.3.6.1.4.1.231.2.17.8.2.1.42
IP address 4
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bcamIfTabIpAddress5 1.3.6.1.4.1.231.2.17.8.2.1.43
IP address 5
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bcamIfTabIpAddress6 1.3.6.1.4.1.231.2.17.8.2.1.44
IP address 6
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bcamIfTabNumInt0Address 1.3.6.1.4.1.231.2.17.8.2.1.45
The number of INT0 addresses enabled for this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamIfTabInt0Address1 1.3.6.1.4.1.231.2.17.8.2.1.46
INT0 address 1 or zero
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabInt0Address2 1.3.6.1.4.1.231.2.17.8.2.1.47
INT0 address 2
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabInt0Address3 1.3.6.1.4.1.231.2.17.8.2.1.48
INT0 address 3
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabInt0Address4 1.3.6.1.4.1.231.2.17.8.2.1.49
INT0 address 4
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabInt0Address5 1.3.6.1.4.1.231.2.17.8.2.1.50
INT0 address 5
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabInt0Address6 1.3.6.1.4.1.231.2.17.8.2.1.51
INT0 address 6
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

bcamIfTabNumIntfAddress 1.3.6.1.4.1.231.2.17.8.2.1.52
The number of INTF addresses enabled for this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamIfTabIntfAddress1 1.3.6.1.4.1.231.2.17.8.2.1.53
INTF address 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

bcamIfTabIntfAddress2 1.3.6.1.4.1.231.2.17.8.2.1.54
INTF address 2
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

bcamIfTabIntfAddress3 1.3.6.1.4.1.231.2.17.8.2.1.55
INTF address 3
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

bcamIfTabIntfAddress4 1.3.6.1.4.1.231.2.17.8.2.1.56
INTF address 4
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

bcamIfTabIntfAddress5 1.3.6.1.4.1.231.2.17.8.2.1.57
INTF address 5
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

bcamIfTabIntfAddress6 1.3.6.1.4.1.231.2.17.8.2.1.58
INTF address 6
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

bcamIfTabBytesOutHighs 1.3.6.1.4.1.231.2.17.8.2.1.59
The number of bytes sent (high word, multiply by 4294967296)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabBytesOutLows 1.3.6.1.4.1.231.2.17.8.2.1.60
The number of bytes sent (low word, add to high word)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabBytesInHighs 1.3.6.1.4.1.231.2.17.8.2.1.61
The number of bytes received (high word, multiply by 4294967296)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabBytesInLows 1.3.6.1.4.1.231.2.17.8.2.1.62
The number of bytes received (low word, add to high word)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabIOsOutHighs 1.3.6.1.4.1.231.2.17.8.2.1.63
The number of IO operations for output (high word, multiply by 4294967296)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabIOsOutLows 1.3.6.1.4.1.231.2.17.8.2.1.64
The number of IO operations for output (low word, add to high word)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabIOsInHighs 1.3.6.1.4.1.231.2.17.8.2.1.65
The number of IO operations for input (high word, multiply by 4294967296)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabIOsInLows 1.3.6.1.4.1.231.2.17.8.2.1.66
The number of IO operations for input (low word, add to high word)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabOutputStops 1.3.6.1.4.1.231.2.17.8.2.1.67
The number of times BCAM sent a RNR (Receive Not Ready) HDLC frame.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabInputStops 1.3.6.1.4.1.231.2.17.8.2.1.68
The number of times BCAM received a RNR (Receive Not Ready) HDLC frame.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabIOErrorOuts 1.3.6.1.4.1.231.2.17.8.2.1.69
The number of IO errors for output operations
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabIOErrorIns 1.3.6.1.4.1.231.2.17.8.2.1.70
The number of IO errors for input operations
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabPacketsNotReceiveds 1.3.6.1.4.1.231.2.17.8.2.1.71
The number of packets not received due to receive not ready
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabInPacketsLanHighs 1.3.6.1.4.1.231.2.17.8.2.1.72
The number of input packets (only valid for ethernet or FDDI) (high word, multiply by 4294967296)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabInPacketsLanLows 1.3.6.1.4.1.231.2.17.8.2.1.73
The number of input packets (only valid for ethernet or FDDI) (low word, add to high word)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabOutPacketsLanHighs 1.3.6.1.4.1.231.2.17.8.2.1.74
The number of output packets (only valid for ethernet or FDDI) (high word, multiply by 4294967296)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabOutPacketsLanLows 1.3.6.1.4.1.231.2.17.8.2.1.75
The number of output packets (only valid for ethernet or FDDI) (low word, add to high word)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabUnicastInHighs 1.3.6.1.4.1.231.2.17.8.2.1.76
The number of unicasts received (high word, multiply by 4294967296)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabUnicastInLows 1.3.6.1.4.1.231.2.17.8.2.1.77
The number of unicasts received (low word, add to high word)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabUnicastOutHighs 1.3.6.1.4.1.231.2.17.8.2.1.78
The number of unicasts sent (high word, multiply by 4294967296)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabUnicastOutLows 1.3.6.1.4.1.231.2.17.8.2.1.79
The number of unicasts sent (low word, add to high word)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabMulticastInHighs 1.3.6.1.4.1.231.2.17.8.2.1.80
The number of multicasts received (high word, multiply by 4294967296)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabMulticastInLows 1.3.6.1.4.1.231.2.17.8.2.1.81
The number of multicasts received (low word, add to high word)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabMulticastOutHighs 1.3.6.1.4.1.231.2.17.8.2.1.82
The number of multicasts sent (high word, multiply by 4294967296)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabMulticastOutLows 1.3.6.1.4.1.231.2.17.8.2.1.83
The number of multicasts sent (low word, add to high word)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabErrorPacketIns 1.3.6.1.4.1.231.2.17.8.2.1.84
The number of erroneous packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabErrorPacketOuts 1.3.6.1.4.1.231.2.17.8.2.1.85
The number of erroneous packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabDiscardIns 1.3.6.1.4.1.231.2.17.8.2.1.86
The number of packets received that were discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabDiscardOuts 1.3.6.1.4.1.231.2.17.8.2.1.87
The number of packets that were discarded before sending.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabUnknownProtoIns 1.3.6.1.4.1.231.2.17.8.2.1.88
The number of packets received that were discarded because of unknown protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bcamIfTabTraceState 1.3.6.1.4.1.231.2.17.8.2.1.89
The current state of the trace. stopped (8) : the trace is not running. running (1) : the trace is running. save (2) : the trace is running and saved to a file. hold (4) : the trace data will be kept in case of an error. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), save(2), hold(4), stopped(8)  

bcamIfTabTraceNumberBuffer 1.3.6.1.4.1.231.2.17.8.2.1.90
The number of buffers used for the trace
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

bcamIfTabTraceBufferLen 1.3.6.1.4.1.231.2.17.8.2.1.91
The length of one trace buffer in bytes (rounded up to multiples of 256).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 512..16384  

bcamRouterNumTable 1.3.6.1.4.1.231.2.17.9.1
The number of table entries in the router table
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamRouterTab 1.3.6.1.4.1.231.2.17.9.2
Table of all routers
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RouterEntry

bcamRouterTabEntry 1.3.6.1.4.1.231.2.17.9.2.1
Information about a router
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RouterEntry  

bcamRouterTabIpLow 1.3.6.1.4.1.231.2.17.9.2.1.1
The lower IP address limit of the IP address range reachable via this router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bcamRouterTabIpHigh 1.3.6.1.4.1.231.2.17.9.2.1.2
The upper IP address limit of the IP address range reachable via this router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bcamRouterTabIpLocal 1.3.6.1.4.1.231.2.17.9.2.1.3
The local IP address used for this endsystem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bcamRouterTabIpRouter 1.3.6.1.4.1.231.2.17.9.2.1.4
The IP address of the router
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bcamRouterTabNumRouter 1.3.6.1.4.1.231.2.17.9.2.1.5
The route number of the router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamHostNumTable 1.3.6.1.4.1.231.2.17.10.1
The number of table entries in the host table
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamHostTab 1.3.6.1.4.1.231.2.17.10.2
Table of all Hosts
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HostEntry

bcamHostTabEntry 1.3.6.1.4.1.231.2.17.10.2.1
Information about a Host
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HostEntry  

bcamHostTabNumber 1.3.6.1.4.1.231.2.17.10.2.1.1
The definite identifier for this host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bcamHostTabName 1.3.6.1.4.1.231.2.17.10.2.1.2
The NEA name of the host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

bcamHostTabSocketName 1.3.6.1.4.1.231.2.17.10.2.1.3
The socket name of the host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

bcamHostTabTyp 1.3.6.1.4.1.231.2.17.10.2.1.4
The type of the host. normal (1) : the host is the BCAM standard host. virtual (2) : the host is a virtual host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), virtual(2)  

bcamHostTabState 1.3.6.1.4.1.231.2.17.10.2.1.5
The current state of the host: active (1) : the host is working. included (2) : the host is known by BCAM. Several bits may be set simultaneous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), included(2)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor