BAY-STACK-LACP-EXT-MIB
File:
BAY-STACK-LACP-EXT-MIB.mib (3896 bytes)
Imported modules
Imported symbols
Defined Types
BsleDot3adAggPortExtEntry |
|
SEQUENCE |
|
|
|
|
bsleDot3adAggPortExtIndex |
InterfaceIndex |
|
|
bsleDot3adAggPortExtAdminEnabled |
TruthValue |
|
|
bsleDot3adAggPortExtOperEnabled |
TruthValue |
|
Defined Values
bayStackLacpExtMib |
1.3.6.1.4.1.45.5.7 |
BayStack LACP Extension MIB
Copyright 2004 Nortel Networks, Inc.
All rights reserved.
This Nortel Networks SNMP Management Information Base
Specification embodies Nortel Networks' confidential and
proprietary intellectual property. Nortel Networks retains
all title and ownership in the Specification, including any
revisions.
This Specification is supplied 'AS IS,' and Nortel Networks
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. |
MODULE-IDENTITY |
|
|
|
bsleDot3adCompatibilityMode |
1.3.6.1.4.1.45.5.7.1.1.1 |
The compatibility mode. This determines behaviour when
an LACP-enabled port is connected to a non-LACP partner,
or when an LACP active trunk port is removed from the
trunk configuration. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
default(1), advanced(2) |
|
bsleDot3adAggPortExtTable |
1.3.6.1.4.1.45.5.7.2 |
This table extends the dot3adAggPortTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
BsleDot3adAggPortExtEntry |
|
bsleDot3adAggPortExtEntry |
1.3.6.1.4.1.45.5.7.2.1 |
An entry that extends dot3adAggPortEntry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
BsleDot3adAggPortExtEntry |
|
|
bsleDot3adAggPortExtIndex |
1.3.6.1.4.1.45.5.7.2.1.1 |
This object is equal to the value of dot3adAggPortIndex of the
entry in the dot3adAggPortTable extended by this entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
|
|
bsleDot3adAggPortExtAdminEnabled |
1.3.6.1.4.1.45.5.7.2.1.2 |
The current administrative setting for the port. A value of
true(1) means the port is set to participate in LACP. A value
of false(2) means the port is set to not participate in LACP. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
bsleDot3adAggPortExtOperEnabled |
1.3.6.1.4.1.45.5.7.2.1.3 |
The current operational state for the port. A value of true(1)
means the port is participating in LACP. A value of false(2)
means the port is not participating in LACP. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|