BAY-STACK-ARP-INSPECTION-MIB

File: BAY-STACK-ARP-INSPECTION-MIB.mib (5027 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
Q-BRIDGE-MIB SYNOPTICS-ROOT-MIB

Imported symbols

NOTIFICATION-TYPE OBJECT-TYPE MODULE-IDENTITY
TruthValue MacAddress InterfaceIndex
VlanIndex bayStackMibs

Defined Types

BsArpInspectionVlanEntry  
SEQUENCE    
  bsArpInspectionVlanId VlanIndex
  bsArpInspectionVlanEnabled TruthValue

BsArpInspectionIfEntry  
SEQUENCE    
  bsArpInspectionIfIndex InterfaceIndex
  bsArpInspectionIfTrusted TruthValue

Defined Values

bayStackArpInspectionMib 1.3.6.1.4.1.45.5.18
This MIB module is used for ARP inspection configuration settings in Nortel's software and products.
MODULE-IDENTITY    

bsArpInspectionNotifications 1.3.6.1.4.1.45.5.18.0
OBJECT IDENTIFIER    

bsArpInspectionObjects 1.3.6.1.4.1.45.5.18.1
OBJECT IDENTIFIER    

bsArpInspectionVlanTable 1.3.6.1.4.1.45.5.18.1.1
This table is used to control ARP inspection settings per-VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BsArpInspectionVlanEntry

bsArpInspectionVlanEntry 1.3.6.1.4.1.45.5.18.1.1.1
An entry containing objects for controlling ARP inspection settings for a VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  BsArpInspectionVlanEntry  

bsArpInspectionVlanId 1.3.6.1.4.1.45.5.18.1.1.1.1
The VLAN ID value of the VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanIndex  

bsArpInspectionVlanEnabled 1.3.6.1.4.1.45.5.18.1.1.1.2
This object is used to control whether ARP inspection is enabled for this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

bsArpInspectionIfTable 1.3.6.1.4.1.45.5.18.1.2
This table is used to control ARP inspection settings per-interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BsArpInspectionIfEntry

bsArpInspectionIfEntry 1.3.6.1.4.1.45.5.18.1.2.1
An entry containing objects for controlling ARP inspection settings for an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  BsArpInspectionIfEntry  

bsArpInspectionIfIndex 1.3.6.1.4.1.45.5.18.1.2.1.1
The ifIndex value of the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

bsArpInspectionIfTrusted 1.3.6.1.4.1.45.5.18.1.2.1.2
This object is used to control whether this interface is trusted for ARP inspection purposes.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

bsArpInspectionNotificationObjects 1.3.6.1.4.1.45.5.18.1.3
OBJECT IDENTIFIER    

bsArpInspectionNotificationSourceMACAddr 1.3.6.1.4.1.45.5.18.1.3.1
This value indicates the source MAC Address of an ARP packet.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

bsaiArpPacketDroppedOnUntrustedPort 1.3.6.1.4.1.45.5.18.0.1
This notification is generated when an ARP packet is dropped on an untrusted port dur to an invalid IP/MAC binding. The port is identified by the instance of bsArpInspectionIfTrusted included in the notification.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE