BAS-CMTS-CONFIG-MIB

File: BAS-CMTS-CONFIG-MIB.mib (81402 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
DOCS-IF-MIB BAS-ALIAS-DOCS-IF-MIB BAS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
Counter32 Unsigned32 Integer32
TimeTicks TEXTUAL-CONVENTION MacAddress
TruthValue ifIndex docsIfCmtsModulationEntry
docsIfDownstreamChannelEntry docsIfCmtsServiceEntry docsIfUpstreamChannelEntry
docsIfCmtsCmStatusEntry basDocsIfCmtsCmStatusEntry basExtCmts

Defined Types

BasCmtsInt8  
Range of INTEGER(-127..128).
TEXTUAL-CONVENTION    
  Integer32 -127..128  

BasCmtsUInt8  
Range of INTEGER(0..255).
TEXTUAL-CONVENTION    
  Integer32 0..255  

BasCmtsByte  
Range of INTEGER(0..255).
TEXTUAL-CONVENTION    
  BasCmtsUInt8  

BasCmtsInt16  
Range of INTEGER(-32768..32767).
TEXTUAL-CONVENTION    
  Integer32 -32768..32767  

BasCmtsUInt16  
Range of INTEGER(0..0x7fff).
TEXTUAL-CONVENTION    
  Integer32 0..ffff  

BasCmtsInt32  
Range of Integer32
TEXTUAL-CONVENTION    
  Integer32  

BasCmtsUInt32  
Range of INTEGER(0..0x7fffffff).
TEXTUAL-CONVENTION    
  Integer32 0..7fffffff  

BasCmtsRowAction  
Defines Bas Cmts row action.
TEXTUAL-CONVENTION    
  INTEGER basCmtsRowActionNone(1), basCmtsRowActionApply(2)  

TenthdBmV  
This data type represents power levels that are normally expressed in dBmV. Units are in tenths of a dBmV; for example, 5.1 dBmV will be represented as 51.
TEXTUAL-CONVENTION    
  Integer32  

BasCmtsHeadEndMapMode  
HeadEndMgr map mode. 0 = Normal, free running maps. 99 = Scripted maps for test and debug.
TEXTUAL-CONVENTION    
  Integer32 0 | 99  

BasCmtsHeadEndMacAddr  
HeadEndMgr MacAddress.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..5)  

BasCmtsHeadEndAuthString  
HeadEndMgr Authorization String.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..255)  

BasCmtsHeadEndEntry  
SEQUENCE    
  basCmtsHeDsChanId BasCmtsByte
  basCmtsHeHwMapTimerPeriodMicrosec BasCmtsUInt16
  basCmtsHeImMapTimerPeriodMillisec BasCmtsUInt16
  basCmtsHePerRngTimerPeriodSec BasCmtsUInt16
  basCmtsHeUcdTimerPerMillisec BasCmtsUInt16
  basCmtsHeMapMode BasCmtsHeadEndMapMode
  basCmtsHeMacAddr BasCmtsHeadEndMacAddr
  basCmtsHeLenAuthString BasCmtsByte
  basCmtsHeAuthString BasCmtsHeadEndAuthString
  basCmtsHeRowAction BasCmtsRowAction
  basCmtsHePlantPropDelay BasCmtsUInt32
  basCmtsHeSupplMapLeadDelay BasCmtsInt32

BasCmtsMacEntry  
SEQUENCE    
  basCmtsMacNumUsBds BasCmtsUInt16 1..64
  basCmtsMacNumDsMsgBds BasCmtsUInt16 1..64
  basCmtsMacNumDsDataBds BasCmtsUInt16 1..64
  basCmtsMacNumIpBuffers BasCmtsUInt16 1..128
  basCmtsMacPciDmaSize BasCmtsByte
  basCmtsMacUpdateFirstParticleLast TruthValue
  basCmtsMacDirectModeDma TruthValue
  basCmtsMacPackedPart TruthValue
  basCmtsMacPackedPartOffset BasCmtsUInt16
  basCmtsMacSpiClkDivider BasCmtsByte
  basCmtsMacSyncRate BasCmtsUInt32
  basCmtsMacRowAction BasCmtsRowAction

BasCmtsMacDsHwEntry  
SEQUENCE    
  basCmtsMacDsHwInterleaverDepth INTEGER
  basCmtsMacDsHwQamctl INTEGER
  basCmtsMacDsHwSymbolRate BasCmtsUInt32
  basCmtsMacDsHwIfFreq BasCmtsUInt32
  basCmtsMacDsHwRefFreq BasCmtsUInt32
  basCmtsMacDsHwOscMultFactor BasCmtsByte

BasCmtsUpChannelPreamblePattern  
Bas Upstream Channel Preamble Pattern.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..127)  

BasCmtsUpstreamChannelEntry  
SEQUENCE    
  basCmtsUpChannelMslotPerTick BasCmtsByte
  basCmtsUpChannelSymbolRate160KSymPerSec BasCmtsByte
  basCmtsUpChannelLenPreamblePattern BasCmtsByte
  basCmtsUpChannelPreamblePattern BasCmtsUpChannelPreamblePattern
  basCmtsUpChannelRowAction BasCmtsRowAction
  basCmtsUpChannelReceivePower TenthdBmV

BasCmtsModulationWsPattern  
Bas upstream channel burst descriptor unique word pattern.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..127)  

BasCmtsModulationEntry  
SEQUENCE    
  basCmtsModUwLenBytes BasCmtsByte
  basCmtsModUwPattern BasCmtsModulationWsPattern
  basCmtsModUwDetectionWindow BasCmtsByte
  basCmtsModUwMismatchThresholdBits BasCmtsByte
  basCmtsModPreambleValueOffset BasCmtsUInt16

BasCmtsUsHwEntry  
SEQUENCE    
  basCmtsUsHwTestProbe BasCmtsByte
  basCmtsUsHwGenCfg1 BasCmtsByte
  basCmtsUsHwGenCfg2 BasCmtsByte
  basCmtsUsHwPreambleCtl BasCmtsByte
  basCmtsUsHwCarrAcf BasCmtsByte
  basCmtsUsHwCarrTcf BasCmtsByte
  basCmtsUsHwBaudAtcf BasCmtsByte
  basCmtsUsHwBaudIntcf BasCmtsByte
  basCmtsUsHwMaxPwrThr BasCmtsByte
  basCmtsUsHwMinPwrThr BasCmtsUInt16
  basCmtsUsHwTimeErrThr BasCmtsUInt16
  basCmtsUsHwAdcClipCtl BasCmtsByte
  basCmtsUsHwLoopCheck BasCmtsByte
  basCmtsUsHwSlcrErrThr BasCmtsByte
  basCmtsUsHwAfltSelThr BasCmtsByte
  basCmtsUsHwBurstGain BasCmtsUInt16
  basCmtsUsHwLoopCtl BasCmtsByte
  basCmtsUsHwEqRsCtl BasCmtsByte
  basCmtsUsHwEqSteps BasCmtsByte

BasCmtsUsMapEntry  
SEQUENCE    
  basCmtsUsMapMaxMapLenHwMapPeriods BasCmtsUInt16
  basCmtsUsMapInitMainRegionSizeMicrosec BasCmtsUInt16
  basCmtsUsMapNewUcdGrantSizeMicrosec BasCmtsUInt16
  basCmtsUsMapMaxDeferredRngIE BasCmtsUInt16
  basCmtsUsMapMapLeadTimeMillisec BasCmtsUInt16
  basCmtsUsMapRequestLimitMslot BasCmtsUInt16
  basCmtsUsMapMapLeadTime BasCmtsUInt16

BasCmtsUsRngEntry  
SEQUENCE    
  basCmtsUsRngTimingOffsetThr BasCmtsUInt32
  basCmtsUsRngFreqOffsetThr BasCmtsUInt16
  basCmtsUsRngPowerOffsetThr BasCmtsByte
  basCmtsUsRngPowerDesired BasCmtsUInt16
  basCmtsUsRngMaxIgnoredInvitations BasCmtsUInt16
  basCmtsUsRngCmRngInviteTimeout BasCmtsUInt16
  basCmtsUsRngMaxPowerAdjQtrdb BasCmtsByte
  basCmtsUsRngZeroPowerAdj TruthValue
  basCmtsUsRngZeroTimingAdj TruthValue
  basCmtsUsRngZeroFreqAdj TruthValue
  basCmtsUsRngRefPowerLevel Unsigned32
  basCmtsUsRngCmPeriodicRngInviteTimeout BasCmtsUInt16

BasCmtsUsStatsEntry  
SEQUENCE    
  basCmtsUsStatsClearFlag BasCmtsUInt32
  basCmtsUsStatsUSSlots BasCmtsUInt32
  basCmtsUsStatsNoUW BasCmtsUInt32
  basCmtsUsStatsDataFECorHCSErr BasCmtsUInt32
  basCmtsUsStatsRequests BasCmtsUInt32
  basCmtsUsStatsRequestColl BasCmtsUInt32
  basCmtsUsStatsReqFECorHCSErr BasCmtsUInt32
  basCmtsUsStatsReqNoEnergy BasCmtsUInt32
  basCmtsUsStatsReqData BasCmtsUInt32
  basCmtsUsStatsReqDataColl BasCmtsUInt32
  basCmtsUsStatsReqDataFECorHCSErr BasCmtsUInt32
  basCmtsUsStatsReqDataNoEnergy BasCmtsUInt32
  basCmtsUsStatsRanging BasCmtsUInt32
  basCmtsUsStatsRangeFECorHCSErr BasCmtsUInt32
  basCmtsUsStatsMapsTooLate BasCmtsUInt32

BasCmtsServiceEntry  
SEQUENCE    
  basCmtsServiceMacAddress MacAddress
  basCmtsServiceIpAddress IpAddress
  basCmtsServiceAuthState INTEGER
  basCmtsServiceFilter BasCmtsUInt16
  basCmtsServiceCurrentNumHost BasCmtsUInt32
  basCmtsServiceMaxNumHost BasCmtsUInt32
  basCmtsServiceOutOctets BasCmtsUInt32
  basCmtsServiceOutPackets BasCmtsUInt32
  basCmtsServiceInDiscards BasCmtsUInt32
  basCmtsServiceOutDiscards BasCmtsUInt32
  basCmtsServiceBwReqCount BasCmtsUInt32
  basCmtsServiceDataGrantCount BasCmtsUInt32

BasFlapControlEntry  
SEQUENCE    
  basFlapCtlClearFlag Integer32
  basFlapCtlMaxTableSize Integer32
  basFlapCtlAgingThresh Integer32
  basFlapCtlInsTimeThresh Integer32
  basFlapCtlPowerAdjThresh Integer32

BasFlapEntry  
SEQUENCE    
  basFlapEntryMacAddress MacAddress
  basFlapEntryUsChan Counter32
  basFlapEntryInsertCount Counter32
  basFlapEntryHitCount Counter32
  basFlapEntryMissCount Counter32
  basFlapEntryCRCErrCount Counter32
  basFlapEntryPAdjCount Counter32
  basFlapEntryFlapCount Counter32
  basFlapEntryLastModemState INTEGER
  basFlapEntryInsertTime TimeTicks
  basFlapEntryRemoveTime TimeTicks
  basFlapEntryLastBasModemState INTEGER

BasCmtsCmStatusEntry  
SEQUENCE    
  basCmtsCmStatusAbortFlag Integer32
  basCmtsCmStatusPrimarySid Integer32
  basCmtsCmStatusValue INTEGER

BasCmtsPktDecodeControlEntry  
SEQUENCE    
  basCmtsPktDecodeControlShowRx TruthValue
  basCmtsPktDecodeControlShowTx TruthValue
  basCmtsPktDecodeControlAnalyzeLevel INTEGER
  basCmtsPktDecodeControlFilterUcd TruthValue
  basCmtsPktDecodeControlFilterMap TruthValue
  basCmtsPktDecodeControlFilterRngReq TruthValue
  basCmtsPktDecodeControlFilterRngRsp TruthValue
  basCmtsPktDecodeControlFilterRegReq TruthValue
  basCmtsPktDecodeControlFilterRegRsp TruthValue
  basCmtsPktDecodeControlFilterUccReq TruthValue
  basCmtsPktDecodeControlFilterUccRsp TruthValue
  basCmtsPktDecodeControlFilterBpkmReq TruthValue
  basCmtsPktDecodeControlFilterBpkmRsp TruthValue
  basCmtsPktDecodeControlFilterPdu TruthValue
  basCmtsPktDecodeControlFilterBwReq TruthValue

BasCmtsMapDecodeControlEntry  
SEQUENCE    
  basCmtsMapDecodeControlTriggerMapPktCount INTEGER
  basCmtsMapDecodeControlTriggerDataGrant INTEGER
  basCmtsMapDecodeControlTriggerUcdChange INTEGER
  basCmtsMapDecodeControlTriggerShortGrant INTEGER
  basCmtsMapDecodeControlTriggerLongGrant INTEGER
  basCmtsMapDecodeControlTriggerInitMaint INTEGER
  basCmtsMapDecodeControlTriggerStationMaint INTEGER
  basCmtsMapDecodeControlTriggerRequestIe INTEGER

BasCmtsMacToSidEntry  
SEQUENCE    
  basCmtsMacToSidMacAddr MacAddress
  basCmtsMacToSidServiceId Integer32
  basCmtsMacToSidType INTEGER

Defined Values

basCmtsConfigMib 1.3.6.1.4.1.3493.2.4.1
This MIB module defines the configuration MIB objects for a Broadband Access System CMTS.
MODULE-IDENTITY    

basCmtsConfigObjects 1.3.6.1.4.1.3493.2.4.1.1
OBJECT IDENTIFIER    

basCmtsDecodeObjects 1.3.6.1.4.1.3493.2.4.1.2
OBJECT IDENTIFIER    

basCmtsMacToSidObjects 1.3.6.1.4.1.3493.2.4.1.3
OBJECT IDENTIFIER    

basCmtsHeadEndTable 1.3.6.1.4.1.3493.2.4.1.1.1
A list of HeadEndMgr settings. The number of entries is given by the value of ifNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsHeadEndEntry

basCmtsHeadEndEntry 1.3.6.1.4.1.3493.2.4.1.1.1.1
An entry containing HeadEndMgr configuration settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127).
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsHeadEndEntry  

basCmtsHeDsChanId 1.3.6.1.4.1.3493.2.4.1.1.1.1.1
CMTS downstream channel ID.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsHeHwMapTimerPeriodMicrosec 1.3.6.1.4.1.3493.2.4.1.1.1.1.2
CMTS hardware Map timer period interval, in microseconds.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsHeImMapTimerPeriodMillisec 1.3.6.1.4.1.3493.2.4.1.1.1.1.3
CMTS initial maintenance timer period interval, in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsHePerRngTimerPeriodSec 1.3.6.1.4.1.3493.2.4.1.1.1.1.4
CMTS periodic ranging timer period interval, in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsHeUcdTimerPerMillisec 1.3.6.1.4.1.3493.2.4.1.1.1.1.5
CMTS UCD periodic timer period interval, in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsHeMapMode 1.3.6.1.4.1.3493.2.4.1.1.1.1.6
CMTS mape mode, either Normal or Scripted maps for test mode. Defaults to normal, free-running mode.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsHeadEndMapMode  

basCmtsHeMacAddr 1.3.6.1.4.1.3493.2.4.1.1.1.1.7
CMTS HeadEndMgr Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsHeadEndMacAddr  

basCmtsHeLenAuthString 1.3.6.1.4.1.3493.2.4.1.1.1.1.8
CMTS HeadEndMgr authorization string length.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsHeAuthString 1.3.6.1.4.1.3493.2.4.1.1.1.1.9
CMTS HeadEndMgr authorization string.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsHeadEndAuthString  

basCmtsHeRowAction 1.3.6.1.4.1.3493.2.4.1.1.1.1.10
An action object used to effect an action.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsRowAction  

basCmtsHePlantPropDelay 1.3.6.1.4.1.3493.2.4.1.1.1.1.11
Plant propagation delay in microseconds.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsHeSupplMapLeadDelay 1.3.6.1.4.1.3493.2.4.1.1.1.1.12
Supplemental map lead delay.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsInt32  

basCmtsMacTable 1.3.6.1.4.1.3493.2.4.1.1.2
A list of BAS Mac settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsMacEntry

basCmtsMacEntry 1.3.6.1.4.1.3493.2.4.1.1.2.1
An entry containing BAS Mac configuration settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127).
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsMacEntry  

basCmtsMacNumUsBds 1.3.6.1.4.1.3493.2.4.1.1.2.1.1
Number of buffers allocated to handle upstream cable modem traffic, both control message and data message traffic.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16 1..64  

basCmtsMacNumDsMsgBds 1.3.6.1.4.1.3493.2.4.1.1.2.1.2
Number of buffers allocated to handle downstream cable modem control message traffic.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16 1..64  

basCmtsMacNumDsDataBds 1.3.6.1.4.1.3493.2.4.1.1.2.1.3
Number of buffers allocated to handle downstream cable modem data message traffic.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16 1..64  

basCmtsMacNumIpBuffers 1.3.6.1.4.1.3493.2.4.1.1.2.1.4
Number of buffers allocated to handle downstream cable modem data message traffic. If an IP packet is addressed to the CMTS Mac address, an IP Buffer is allocated to send the data to the local host IP stack (bcmnet_fd). TBD - We probably don't need this.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16 1..128  

basCmtsMacPciDmaSize 1.3.6.1.4.1.3493.2.4.1.1.2.1.5
Maximum size of PCI bus DMA transaction, required by BCM3210.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsMacUpdateFirstParticleLast 1.3.6.1.4.1.3493.2.4.1.1.2.1.6
MAC control register option flag: if true, then update first particle last.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsMacDirectModeDma 1.3.6.1.4.1.3493.2.4.1.1.2.1.7
MAC control register option flag: if true, then enable direct mode DMA.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsMacPackedPart 1.3.6.1.4.1.3493.2.4.1.1.2.1.8
Packed particle boolean, FALSE indicates 1 particle per packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsMacPackedPartOffset 1.3.6.1.4.1.3493.2.4.1.1.2.1.9
Packed particle offset, offset for header length in packed particle.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsMacSpiClkDivider 1.3.6.1.4.1.3493.2.4.1.1.2.1.10
Specifies the SPI Clock Divider.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsMacSyncRate 1.3.6.1.4.1.3493.2.4.1.1.2.1.11
Specifies the downstream Sync control message interval. Units are millisec. Default rate is 10 millisec.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsMacRowAction 1.3.6.1.4.1.3493.2.4.1.1.2.1.12
Row status.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsRowAction  

basCmtsMacDsHwTable 1.3.6.1.4.1.3493.2.4.1.1.3
A list of Bas Downstream settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsMacDsHwEntry

basCmtsMacDsHwEntry 1.3.6.1.4.1.3493.2.4.1.1.3.1
An entry containing Bas Mac DsHw configuration settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127).
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsMacDsHwEntry  

basCmtsMacDsHwInterleaverDepth 1.3.6.1.4.1.3493.2.4.1.1.3.1.1
Specifies Mac DsHw interleaver depth.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER basCmtsMacDsHwIntDepth8(8), basCmtsMacDsHwIntDepth16(16), basCmtsMacDsHwIntDepth32(32), basCmtsMacDsHwIntDepth64(64), basCmtsMacDsHwIntDepth128(128)  

basCmtsMacDsHwQamctl 1.3.6.1.4.1.3493.2.4.1.1.3.1.2
Specifies Mac DsHw QAM control. 0x03 = 64 QAM 0x05 = 256 QAM.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER basCmtsMacDsHwQamctl64QAM(3), basCmtsMacDsHwQamctl256QAM(5)  

basCmtsMacDsHwSymbolRate 1.3.6.1.4.1.3493.2.4.1.1.3.1.3
Specifies Mac DsHw symbol rate, in Units Baud. Typical values: 64 QAM - 5056941 baud (default) 256 QAM - 5360537 baud
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsMacDsHwIfFreq 1.3.6.1.4.1.3493.2.4.1.1.3.1.4
Specifies Mac DsHw downstream channel frequency, in Hz.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsMacDsHwRefFreq 1.3.6.1.4.1.3493.2.4.1.1.3.1.5
Specifies Mac DsHw reference frequency, in Hz.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsMacDsHwOscMultFactor 1.3.6.1.4.1.3493.2.4.1.1.3.1.6
Specifies Mac DsHw Osc Mult Factor. For Bcm3210, use: refFreq (MHz) MultFactor ------------- ---------- 114.0 1 28.5 4 28.322 4 20.48 6
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUpstreamChannelTable 1.3.6.1.4.1.3493.2.4.1.1.4
A list of HeadEndMgr settings. The number of entries is given by the value of ifNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsUpstreamChannelEntry

basCmtsUpstreamChannelEntry 1.3.6.1.4.1.3493.2.4.1.1.4.1
An entry containing HeadEndMgr configuration settings. An entry in this table exists for each ifEntry with an ifType of docsCableUpstream(129).
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsUpstreamChannelEntry  

basCmtsUpChannelMslotPerTick 1.3.6.1.4.1.3493.2.4.1.1.4.1.1
Minislot period, in ticks.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUpChannelSymbolRate160KSymPerSec 1.3.6.1.4.1.3493.2.4.1.1.4.1.2
Upstream channel symbol rate, in 1609KSym/second.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUpChannelLenPreamblePattern 1.3.6.1.4.1.3493.2.4.1.1.4.1.3
Upstream channel preamble pattern length.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUpChannelPreamblePattern 1.3.6.1.4.1.3493.2.4.1.1.4.1.4
Upstream channel preamble pattern.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUpChannelPreamblePattern  

basCmtsUpChannelRowAction 1.3.6.1.4.1.3493.2.4.1.1.4.1.5
Row status.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsRowAction  

basCmtsUpChannelReceivePower 1.3.6.1.4.1.3493.2.4.1.1.4.1.6
Receive Power level that is desired at the CMTS in TenthdbMV
Status: current Access: read-write
OBJECT-TYPE    
  TenthdBmV  

basCmtsModulationTable 1.3.6.1.4.1.3493.2.4.1.1.5
A list of HeadEndMgr settings. The number of entries is given by the value of ifNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsModulationEntry

basCmtsModulationEntry 1.3.6.1.4.1.3493.2.4.1.1.5.1
An entry containing HeadEndMgr configuration settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsModulationEntry  

basCmtsModUwLenBytes 1.3.6.1.4.1.3493.2.4.1.1.5.1.1
Length of unique word pattern, in bytes. [Note = Supported values are 1-3 for BCM3137. Default value is 1, equal to 4 symbols.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsModUwPattern 1.3.6.1.4.1.3493.2.4.1.1.5.1.2
Content of unique word pattern. The number of bytes in the unique word pattern which are relevant is determined by basCmtsModUwLenBytes.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsModulationWsPattern  

basCmtsModUwDetectionWindow 1.3.6.1.4.1.3493.2.4.1.1.5.1.3
Time window around a nominal detection time in which the UW detector is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsModUwMismatchThresholdBits 1.3.6.1.4.1.3493.2.4.1.1.5.1.4
Specifies precision of match between unique word pattern and incoming burst by specifying the number of bits which are allowed to NOT match.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsModPreambleValueOffset 1.3.6.1.4.1.3493.2.4.1.1.5.1.5
Offset into preamble where value bits, or pattern, begins.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsHwTable 1.3.6.1.4.1.3493.2.4.1.1.6
A list of HeadEndMgr settings. The number of entries is given by the value of ifNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsUsHwEntry

basCmtsUsHwEntry 1.3.6.1.4.1.3493.2.4.1.1.6.1
An entry containing HeadEndMgr configuration settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsUsHwEntry  

basCmtsUsHwTestProbe 1.3.6.1.4.1.3493.2.4.1.1.6.1.1
Bas Bcm3137 test/probe mode register.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwGenCfg1 1.3.6.1.4.1.3493.2.4.1.1.6.1.2
Bas Bcm3137 general configuration register 1.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwGenCfg2 1.3.6.1.4.1.3493.2.4.1.1.6.1.3
Bas Bcm3137 general configuration register 2.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwPreambleCtl 1.3.6.1.4.1.3493.2.4.1.1.6.1.4
Bas Bcm3137 preamble process control register.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwCarrAcf 1.3.6.1.4.1.3493.2.4.1.1.6.1.5
Bas Bcm3137 carrier acquisition loop coefficients.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwCarrTcf 1.3.6.1.4.1.3493.2.4.1.1.6.1.6
Bas Bcm3137 carrier tracking loop coefficients.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwBaudAtcf 1.3.6.1.4.1.3493.2.4.1.1.6.1.7
Bas Bcm3137 baud loop acquisition/tracking coefficients.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwBaudIntcf 1.3.6.1.4.1.3493.2.4.1.1.6.1.8
Bas Bcm3137 baud loop integrator coefficients.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwMaxPwrThr 1.3.6.1.4.1.3493.2.4.1.1.6.1.9
Bas Bcm3137 maximum power level threshold.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwMinPwrThr 1.3.6.1.4.1.3493.2.4.1.1.6.1.10
Bas Bcm3137 minimum power level threshold.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsHwTimeErrThr 1.3.6.1.4.1.3493.2.4.1.1.6.1.11
Bas Bcm3137 burst timing error threshold.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsHwAdcClipCtl 1.3.6.1.4.1.3493.2.4.1.1.6.1.12
Bas Bcm3137 ADC clipping detection control register.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwLoopCheck 1.3.6.1.4.1.3493.2.4.1.1.6.1.13
Bas Bcm3137 loop checking detection control register.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwSlcrErrThr 1.3.6.1.4.1.3493.2.4.1.1.6.1.14
Bas Bcm3137 slicer error threshold.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwAfltSelThr 1.3.6.1.4.1.3493.2.4.1.1.6.1.15
Bas Bcm3137 amplitude filter selection threshold.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwBurstGain 1.3.6.1.4.1.3493.2.4.1.1.6.1.16
Bas Bcm3137 burst gain adjusting factor register.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsHwLoopCtl 1.3.6.1.4.1.3493.2.4.1.1.6.1.17
Bas Bcm3137 loop control register.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwEqRsCtl 1.3.6.1.4.1.3493.2.4.1.1.6.1.18
Bas Bcm3137 equalizer/RS decoder control register.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsHwEqSteps 1.3.6.1.4.1.3493.2.4.1.1.6.1.19
Bas Bcm3137 equalizer adaptation step size register.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsMapTable 1.3.6.1.4.1.3493.2.4.1.1.7
A Upstream Channel Map Maker Settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsUsMapEntry

basCmtsUsMapEntry 1.3.6.1.4.1.3493.2.4.1.1.7.1
An entry containing Upstream Channel Map Maker configuration settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsUsMapEntry  

basCmtsUsMapMaxMapLenHwMapPeriods 1.3.6.1.4.1.3493.2.4.1.1.7.1.1
Bas Upstream Channel MapMaker maximum map length, in units of hardware map timer periods. [Note: Set this value large enough to handle large packets, but small enough to not let latency get too large when channel is busy.]
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsMapInitMainRegionSizeMicrosec 1.3.6.1.4.1.3493.2.4.1.1.7.1.2
Bas Upstream Channel MapMaker size of Initial Maint contention region, in microseconds. [Note: Maps with Initial Maint regions are sent periodically. Most maps do not have an Initial Maint region.]
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsMapNewUcdGrantSizeMicrosec 1.3.6.1.4.1.3493.2.4.1.1.7.1.3
Bas Upstream Channel MapMaker new UCD grant size. After a UCD change, this specifies the size of grant to null sid (which functions as a delay for CM's to digest the new UCD), in microseconds.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsMapMaxDeferredRngIE 1.3.6.1.4.1.3493.2.4.1.1.7.1.4
Bas Upstream Channel MapMaker maximum number of deferred ranging invitations per map.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsMapMapLeadTimeMillisec 1.3.6.1.4.1.3493.2.4.1.1.7.1.5
Bas Upstream Channel MapMaker map lead time, in milliseconds.
Status: deprecated Access: read-only
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsMapRequestLimitMslot 1.3.6.1.4.1.3493.2.4.1.1.7.1.6
Bas Upstream Channel MapMaker maximum size for request contention region, in mini-slots.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsMapMapLeadTime 1.3.6.1.4.1.3493.2.4.1.1.7.1.7
Bas Upstream Channel MapMaker map lead time, in microseconds.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsRngTable 1.3.6.1.4.1.3493.2.4.1.1.8
A Upstream Channel Range Finder Settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsUsRngEntry

basCmtsUsRngEntry 1.3.6.1.4.1.3493.2.4.1.1.8.1
An entry containing Upstream Channel Range Finder configuration settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsUsRngEntry  

basCmtsUsRngTimingOffsetThr 1.3.6.1.4.1.3493.2.4.1.1.8.1.1
Bas Upstream Channel RangeFinder timing offset threshold. If timing offset reported by MAC chip is <= this threshold value, then timing adjustment may be stopped. Units are 10.24 MHz clock cycles.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsRngFreqOffsetThr 1.3.6.1.4.1.3493.2.4.1.1.8.1.2
Bas Upstream Channel RangeFinder frequency offset threshold. If frequency offset reported by MAC chip is <= this threshold value, then frequency adjustment may be stopped. (Hz units).
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsRngPowerOffsetThr 1.3.6.1.4.1.3493.2.4.1.1.8.1.3
Bas Upstream Channel RangeFinder power offset threshold. If power level offset reported by MAC chip is <= this threshold value, then power level adjustment may be stopped. (1/4 dB units).
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsRngPowerDesired 1.3.6.1.4.1.3493.2.4.1.1.8.1.4
Bas Upstream Channel RangeFinder power desired. Desired linear power level. Used as reference when computing power adjustment. Units are a Broadcom defined (16) bit linear scale.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsRngMaxIgnoredInvitations 1.3.6.1.4.1.3493.2.4.1.1.8.1.5
Bas Upstream Channel RangeFinder maximum ignored invitations. Maximum ranging invitations that a CM may ignore before being considered quiet.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsRngCmRngInviteTimeout 1.3.6.1.4.1.3493.2.4.1.1.8.1.6
Bas Upstream Channel RangeFinder cable modem range invite timeout. Minimum time allowed for a CM following receipt of a RNG-RSP before it is expected to reply to an invitation to range request, in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsRngMaxPowerAdjQtrdb 1.3.6.1.4.1.3493.2.4.1.1.8.1.7
Bas Upstream Channel RangeFinder maximum power adjustment for a particular RNG-RSP message, in 1/4dB units.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsByte  

basCmtsUsRngZeroPowerAdj 1.3.6.1.4.1.3493.2.4.1.1.8.1.8
Bas Upstream Channel RangeFinder zero power adjustment. If true, power adjustment item in range response message will be unconditionally set to 0. Useful for debugging.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsUsRngZeroTimingAdj 1.3.6.1.4.1.3493.2.4.1.1.8.1.9
Bas Upstream Channel RangeFinder zero timing adjustment. If true, timing adjustment item in range response message will be unconditionally set to 0. Useful for debugging.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsUsRngZeroFreqAdj 1.3.6.1.4.1.3493.2.4.1.1.8.1.10
Bas Upstream Channel RangeFinder zero frequency adjustment. If true, frequency adjustment item in range response message will be unconditionally set to 0. Useful for debugging.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsUsRngRefPowerLevel 1.3.6.1.4.1.3493.2.4.1.1.8.1.11
Reference power level for this upstream channel.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

basCmtsUsRngCmPeriodicRngInviteTimeout 1.3.6.1.4.1.3493.2.4.1.1.8.1.12
Used to space the ranging invitations, if the modem has completed ranging.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsUsStatsTable 1.3.6.1.4.1.3493.2.4.1.1.13
Contains statistics for each upstream channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsUsStatsEntry

basCmtsUsStatsEntry 1.3.6.1.4.1.3493.2.4.1.1.13.1
An entry containing statistics for each upstream channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsUsStatsEntry  

basCmtsUsStatsClearFlag 1.3.6.1.4.1.3493.2.4.1.1.13.1.1
Writing any value to this mib clears all stats in this table.
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsUSSlots 1.3.6.1.4.1.3493.2.4.1.1.13.1.2
Number upstream data information elements in Maps.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsNoUW 1.3.6.1.4.1.3493.2.4.1.1.13.1.3
Number upstream data packets with FEC No Unique Word.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsDataFECorHCSErr 1.3.6.1.4.1.3493.2.4.1.1.13.1.4
Number upstream data packets with FEC or HCS Error.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsRequests 1.3.6.1.4.1.3493.2.4.1.1.13.1.5
Number request slots allocated.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsRequestColl 1.3.6.1.4.1.3493.2.4.1.1.13.1.6
Number request slots with collisions.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsReqFECorHCSErr 1.3.6.1.4.1.3493.2.4.1.1.13.1.7
Number request slots corrupted by bad FEC or HCS.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsReqNoEnergy 1.3.6.1.4.1.3493.2.4.1.1.13.1.8
Number request slots with no energy.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsReqData 1.3.6.1.4.1.3493.2.4.1.1.13.1.9
Number request/data slots allocated.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsReqDataColl 1.3.6.1.4.1.3493.2.4.1.1.13.1.10
Number request/data slots with collisions.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsReqDataFECorHCSErr 1.3.6.1.4.1.3493.2.4.1.1.13.1.11
Number request/data slots with FEC or HCS errors.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsReqDataNoEnergy 1.3.6.1.4.1.3493.2.4.1.1.13.1.12
Number request/data slots with no energy.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsRanging 1.3.6.1.4.1.3493.2.4.1.1.13.1.13
Number upstream ranging packets received.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsRangeFECorHCSErr 1.3.6.1.4.1.3493.2.4.1.1.13.1.14
Number ranging slots with FEC or HCS errors.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsUsStatsMapsTooLate 1.3.6.1.4.1.3493.2.4.1.1.13.1.15
Number of Maps too late detected.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsServiceTable 1.3.6.1.4.1.3493.2.4.1.1.9
The Service Table per MAC IF
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsServiceEntry

basCmtsServiceEntry 1.3.6.1.4.1.3493.2.4.1.1.9.1
An entry containing information for a particular SID
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsServiceEntry  

basCmtsServiceMacAddress 1.3.6.1.4.1.3493.2.4.1.1.9.1.1
MAC address of this Cable Modem. If the Cable Modem has multiple MAC addresses, this is the MAC address associated with the Cable interface.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

basCmtsServiceIpAddress 1.3.6.1.4.1.3493.2.4.1.1.9.1.2
IP address of The CMTS.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

basCmtsServiceAuthState 1.3.6.1.4.1.3493.2.4.1.1.9.1.3
Auth State Object.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER initial(1), temporary(2), permanent(3), auth(4), max(5)  

basCmtsServiceFilter 1.3.6.1.4.1.3493.2.4.1.1.9.1.4
The Service Filter Object
Status: current Access: read-write
OBJECT-TYPE    
  BasCmtsUInt16  

basCmtsServiceCurrentNumHost 1.3.6.1.4.1.3493.2.4.1.1.9.1.5
The Current number of host.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsServiceMaxNumHost 1.3.6.1.4.1.3493.2.4.1.1.9.1.6
The max number of host
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsServiceOutOctets 1.3.6.1.4.1.3493.2.4.1.1.9.1.7
The number of service out octets.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsServiceOutPackets 1.3.6.1.4.1.3493.2.4.1.1.9.1.8
The number of service out packets.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsServiceInDiscards 1.3.6.1.4.1.3493.2.4.1.1.9.1.9
The number of input packets discarded.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsServiceOutDiscards 1.3.6.1.4.1.3493.2.4.1.1.9.1.10
The number of output packets discarded.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsServiceBwReqCount 1.3.6.1.4.1.3493.2.4.1.1.9.1.11
The bandwidth request count for this service.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basCmtsServiceDataGrantCount 1.3.6.1.4.1.3493.2.4.1.1.9.1.12
The data grant count for this service.
Status: current Access: read-only
OBJECT-TYPE    
  BasCmtsUInt32  

basFlapControlTable 1.3.6.1.4.1.3493.2.4.1.1.10
Defines the flap table control settings per MAC IF. A flap-list is a table maintained for every modem (active or not) that is having communication difficulties. Flapping refers to the rapid disconneting and reconneting of a cable modem that is having problems holding a connection. The flap list contains modem MAC addresses and logs the time of the most recent activity. The size and entry thresholds for the flap list can be configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasFlapControlEntry

basFlapControlEntry 1.3.6.1.4.1.3493.2.4.1.1.10.1
Defines the flap table control settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127).
Status: current Access: not-accessible
OBJECT-TYPE    
  BasFlapControlEntry  

basFlapCtlClearFlag 1.3.6.1.4.1.3493.2.4.1.1.10.1.1
Flap list clear control flag. Setting this flag to 1 empties the flap-list table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

basFlapCtlMaxTableSize 1.3.6.1.4.1.3493.2.4.1.1.10.1.2
Specifies the max size of the flap-list table. Setting table size to 0 disables flap-list table maintenance.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..8191  

basFlapCtlAgingThresh 1.3.6.1.4.1.3493.2.4.1.1.10.1.3
Specifies the number of days to age the cable modem from the flap list table. Setting the aging threshold to 0 results in modems never being aged from the table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..60  

basFlapCtlInsTimeThresh 1.3.6.1.4.1.3493.2.4.1.1.10.1.4
Specifies the insertion time threshold, in seconds. This threshold controls the operation of a flapping modem detector. When the link establishment rate of a modem is shorter than the period defined by this parameter, the modem is placed in the flap list. Setting this parameter to 0 results in modems never being inserted in the flap list table due to short link establishment times.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..604800  

basFlapCtlPowerAdjThresh 1.3.6.1.4.1.3493.2.4.1.1.10.1.5
Specifies the power-adjust threshold for recording a flap list event. When the power adjustment of a modem exceeds the threshold, the modem is placed in the flap list. Setting this parameter to 0 results in modems never being inserted in the flap list table due to power adjustments.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..10  

basFlapTable 1.3.6.1.4.1.3493.2.4.1.1.11
Defines the flap table per MAC IF and MacAddr. A flap-list is a table maintained for every modem (active or not) that is having communication difficulties. Flapping refers to the rapid disconnetin and reconneting of a cable modem that is having problems holding a connection. The flap list contains modem MAC addresses and logs the time of the most recent activity. The size and entry thresholds for the flap list can be configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasFlapEntry

basFlapEntry 1.3.6.1.4.1.3493.2.4.1.1.11.1
Defines the flap table entries. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127) and for every MacAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasFlapEntry  

basFlapEntryMacAddress 1.3.6.1.4.1.3493.2.4.1.1.11.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

basFlapEntryUsChan 1.3.6.1.4.1.3493.2.4.1.1.11.1.2
Specifies the upstream channel the specified modem is currently using.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

basFlapEntryInsertCount 1.3.6.1.4.1.3493.2.4.1.1.11.1.3
Specifies the number of time the modem comes up and inserts itself into the network. It can indicate intermittent downstream sync loss or DHCP or modem registration problems.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

basFlapEntryHitCount 1.3.6.1.4.1.3493.2.4.1.1.11.1.4
Specifies the number of time the modem responds to MAC layer keep alive messages. It can indicate intermittent upstream, laser clipping, or common-path distortion.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

basFlapEntryMissCount 1.3.6.1.4.1.3493.2.4.1.1.11.1.5
Specifies the number of time the modem misses the MAC layer keep alive messages. It can indicate intermittent upstream, laser clipping, or common-path distortion.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

basFlapEntryCRCErrCount 1.3.6.1.4.1.3493.2.4.1.1.11.1.6
Specifies the number of Cyclic Redundancy Check errors from this modem. It can indicate intermittent upstream, laser clipping, or common-path distortion.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

basFlapEntryPAdjCount 1.3.6.1.4.1.3493.2.4.1.1.11.1.7
Specifies the number of times the headend instructed the modem to adjust transmit power more than the threshold-specified number of dB. It can indicate amplifier degradation, poor connections, or thermal sensitivity.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

basFlapEntryFlapCount 1.3.6.1.4.1.3493.2.4.1.1.11.1.8
Specifies the sum of basFlapEntryPAdjCount and basFlapEntryInsertCount.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

basFlapEntryLastModemState 1.3.6.1.4.1.3493.2.4.1.1.11.1.9
Specifies the modem state when this modem last flapped. State is as specified in the RF Interface Specification, and indicates the following events: other(1) Any state other than below. ranging(2) The CMTS has received an Initial Ranging Request message from the CM, and the ranging process is not yet complete. rangingAborted(3) The CMTS has sent a Ranging Abort message to the CM. rangingComplete(4) The CMTS has sent a Ranging Complete message to the CM. ipComplete(5) The CMTS has received a DHCP reply message and forwarded it to the CM. registrationComplete(6) The CMTS has sent a Registration Response mesage to the CM. accessDenied(7) The CMTS has sent a Registration Aborted message to the CM.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ranging(2), rangingAborted(3), rangingComplete(4), ipComplete(5), registrationComplete(6), accessDenied(7)  

basFlapEntryInsertTime 1.3.6.1.4.1.3493.2.4.1.1.11.1.10
Specifies the most recent time that the modem was inserted in the network.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

basFlapEntryRemoveTime 1.3.6.1.4.1.3493.2.4.1.1.11.1.11
Specifies the most recent time that the modem dropped the connection.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

basFlapEntryLastBasModemState 1.3.6.1.4.1.3493.2.4.1.1.11.1.12
Specifies the modem state when this modem last flapped. State is as specified in the basCmtsCmStatusValue mib.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER basModemOffline(1), basInitRngRcvd(2), basRanging(3), basRangingComplete(4), basDhcpDiscoverRcvd(5), basDhcpRequestRcvd(6), basTimeReqRcvd(7), basTftpReqRcvd(8), basRegisteredNetAccessEnabled(9), basRegisteredNetAccessDisabled(10), basRegisteredBPIKekAssigned(11), basRegisteredBPITekAssigned(12), basRegFailBadCMTSMic(13), basRegFailBadCOS(14), basRegFailAuthFailure(15), basKekReject(16), basTekReject(17)  

basCmtsCmStatusTable 1.3.6.1.4.1.3493.2.4.1.1.12
A list of CMTS CM status settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsCmStatusEntry

basCmtsCmStatusEntry 1.3.6.1.4.1.3493.2.4.1.1.12.1
An entry in this table exists for each entry in the docsIfCmtsCmStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsCmStatusEntry  

basCmtsCmStatusAbortFlag 1.3.6.1.4.1.3493.2.4.1.1.12.1.1
CMTS CM status clear control flag. Setting this flag to 1 causes a Range-Abort message to be sent to the cable modem.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

basCmtsCmStatusPrimarySid 1.3.6.1.4.1.3493.2.4.1.1.12.1.2
Primary SID of this modem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

basCmtsCmStatusValue 1.3.6.1.4.1.3493.2.4.1.1.12.1.3
Specifies the modem state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER basModemOffline(1), basInitRngRcvd(2), basRanging(3), basRangingComplete(4), basDhcpDiscoverRcvd(5), basDhcpRequestRcvd(6), basTimeReqRcvd(7), basTftpReqRcvd(8), basRegisteredNetAccessEnabled(9), basRegisteredNetAccessDisabled(10), basRegisteredBPIKekAssigned(11), basRegisteredBPITekAssigned(12), basRegFailBadCMTSMic(13), basRegFailBadCOS(14), basRegFailAuthFailure(15), basKekReject(16), basTekReject(17)  

basCmtsPktDecodeControlTable 1.3.6.1.4.1.3493.2.4.1.2.1
A list of BAS cmts packet decode control objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsPktDecodeControlEntry

basCmtsPktDecodeControlEntry 1.3.6.1.4.1.3493.2.4.1.2.1.1
An entry containing BAS Packet decode control settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127).
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsPktDecodeControlEntry  

basCmtsPktDecodeControlShowRx 1.3.6.1.4.1.3493.2.4.1.2.1.1.1
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsPktDecodeControlShowTx 1.3.6.1.4.1.3493.2.4.1.2.1.1.2
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsPktDecodeControlAnalyzeLevel 1.3.6.1.4.1.3493.2.4.1.2.1.1.3
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER lowLevel(1), mediumLevel(2), highLevel(3), levelFour(4)  

basCmtsPktDecodeControlFilterUcd 1.3.6.1.4.1.3493.2.4.1.2.1.1.4
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsPktDecodeControlFilterMap 1.3.6.1.4.1.3493.2.4.1.2.1.1.5
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsPktDecodeControlFilterRngReq 1.3.6.1.4.1.3493.2.4.1.2.1.1.6
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsPktDecodeControlFilterRngRsp 1.3.6.1.4.1.3493.2.4.1.2.1.1.7
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsPktDecodeControlFilterRegReq 1.3.6.1.4.1.3493.2.4.1.2.1.1.8
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsPktDecodeControlFilterRegRsp 1.3.6.1.4.1.3493.2.4.1.2.1.1.9
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsPktDecodeControlFilterUccReq 1.3.6.1.4.1.3493.2.4.1.2.1.1.10
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsPktDecodeControlFilterUccRsp 1.3.6.1.4.1.3493.2.4.1.2.1.1.11
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsPktDecodeControlFilterBpkmReq 1.3.6.1.4.1.3493.2.4.1.2.1.1.12
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsPktDecodeControlFilterBpkmRsp 1.3.6.1.4.1.3493.2.4.1.2.1.1.13
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsPktDecodeControlFilterPdu 1.3.6.1.4.1.3493.2.4.1.2.1.1.14
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsPktDecodeControlFilterBwReq 1.3.6.1.4.1.3493.2.4.1.2.1.1.15
Decode control on/off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

basCmtsMapDecodeControlTable 1.3.6.1.4.1.3493.2.4.1.2.2
A list of BAS cmts map decode control objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsMapDecodeControlEntry

basCmtsMapDecodeControlEntry 1.3.6.1.4.1.3493.2.4.1.2.2.1
An entry containing BAS MAP decode control settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127).
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsMapDecodeControlEntry  

basCmtsMapDecodeControlTriggerMapPktCount 1.3.6.1.4.1.3493.2.4.1.2.2.1.1
Data trigger.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

basCmtsMapDecodeControlTriggerDataGrant 1.3.6.1.4.1.3493.2.4.1.2.2.1.2
Data trigger.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER triggerOn(1), triggerOff(2)  

basCmtsMapDecodeControlTriggerUcdChange 1.3.6.1.4.1.3493.2.4.1.2.2.1.3
Data trigger.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER triggerOn(1), triggerOff(2)  

basCmtsMapDecodeControlTriggerShortGrant 1.3.6.1.4.1.3493.2.4.1.2.2.1.4
Data trigger.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER triggerOn(1), triggerOff(2)  

basCmtsMapDecodeControlTriggerLongGrant 1.3.6.1.4.1.3493.2.4.1.2.2.1.5
Data trigger.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER triggerOn(1), triggerOff(2)  

basCmtsMapDecodeControlTriggerInitMaint 1.3.6.1.4.1.3493.2.4.1.2.2.1.6
Data trigger.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER triggerOn(1), triggerOff(2)  

basCmtsMapDecodeControlTriggerStationMaint 1.3.6.1.4.1.3493.2.4.1.2.2.1.7
Data trigger.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER triggerOn(1), triggerOff(2)  

basCmtsMapDecodeControlTriggerRequestIe 1.3.6.1.4.1.3493.2.4.1.2.2.1.8
Data trigger.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER triggerOn(1), triggerOff(2)  

basCmtsMacToSidTable 1.3.6.1.4.1.3493.2.4.1.3.1
A list of BAS cmts mac to sid objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCmtsMacToSidEntry

basCmtsMacToSidEntry 1.3.6.1.4.1.3493.2.4.1.3.1.1
An entry containing BAS CMTS MAC to SID settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCmtsMacToSidEntry  

basCmtsMacToSidMacAddr 1.3.6.1.4.1.3493.2.4.1.3.1.1.1
The MAC address of the host or the cable modem
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

basCmtsMacToSidServiceId 1.3.6.1.4.1.3493.2.4.1.3.1.1.2
The SID of the host or the cable modem derived from the MAC
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

basCmtsMacToSidType 1.3.6.1.4.1.3493.2.4.1.3.1.1.3
Type of device attached to this SID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), cableModem(2), host(3)