AtiEdgeSwitch-MIB

File: AtiEdgeSwitch-MIB.mib (462137 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1155-SMI

Imported symbols

IpAddress MODULE-IDENTITY OBJECT-TYPE
NOTIFICATION-TYPE Integer32 Counter64
Counter32 TimeTicks Gauge32
TEXTUAL-CONVENTION DisplayString RowStatus
TruthValue MacAddress enterprises

Defined Types

AtiStkSwLldpMedDeviceClass  
Device Class to which the device is a member. A value of notDefined(0) indicates that the device has capabilities not covered by any of the LLDP-MED classes. A value of endpointClass1(1) indicates that the device has endpoint class 1 capabilities. A value of endpointClass2(2) indicates that the device has endpoint class 2 capabilities. A value of endpointClass3(3) indicates that the device has endpoint class 3 capabilities. A value of networkConnectivity(4) indicates that the device has network connectivity device capabilities.
TEXTUAL-CONVENTION    
  INTEGER notDefined(0), endpointClass1(1), endpointClass2(2), endpointClass3(3), networkConnectivity(4)  

AtiStkSwLldpMedCapabilities  
Bitmap that includes the MED organizationally defined set of LLDP TLVs the device is capable of and whose transmission is allowed on the local LLDP agent by network management. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED TLV. Having the bit 'capabilities(0)' set indicates that the LLDP agent refers to the Capabilities TLVs. Having the bit 'networkPolicy(1)' set indicates that the LLDP agent refers to the Network Policy TLVs. Having the bit 'location(2)' set indicates that the LLDP agent refers to the Emergency Communications System Location TLVs. Having the bit 'extendedPSE(3)' set indicates that the LLDP agent refers to the Extended PoE TLVs with PSE capabilities. Having the bit 'extendedPD(4)' set indicates that the LLDP agent refers to the Extended PoE TLVs with PD capabilities. Having the bit 'inventory(5)' set indicates that the LLDP agent refers to the Hardware Revision, Firmware Revision, Software Revision, Serial Number, Manufacturer Name, Model Name, and Asset ID TLVs.
TEXTUAL-CONVENTION    
  BITS capabilities(0), networkPolicy(1), location(2), extendedPSE(3), extendedPD(4), inventory(5)  

LocationSubtype  
The location subtype advertised by the remote endpoint. A value coordinateBased(2) indicates that the location subtype advertised by the endpoint is defined to use the relevant sub- fields of the DHCP option for Coordinate LCI as specified in ANSI/TIA-1057, Section 10.2.4.3.1. A value civicAddress(3) indicates that the location subtype advertised by the endpoint is defined to use the relevant sub- fields of the DHCP option for Civic Address as specified in ANSI/TIA-1057, Section 10.2.4.3.2. A value elin(4) indicates that the location subtype advertised by the endpoint is defined to use the Emergency Location Information Number (ELIN) as specified in ANSI/TIA-1057, Section 10.2.4.3.3.
TEXTUAL-CONVENTION    
  INTEGER unknown(1), coordinateBased(2), civicAddress(3), elin(4)  

PolicyAppType  
The media type that defines the primary function of the application for the policy advertised by an endpoint. Having the bit voice(1) set indicates that the media type defining a primary function of the application for the policy advertised on the local port is voice. Having the bit voiceSignaling(3) set indicates that the media type defining a primary function of the application for the policy advertised on the local port is voice signaling. Having the bit guestVoice(4) set indicates that the media type Defining a primary function of the application for the policy advertised on the local port is guest voice. Having the bit guestVoiceSignaling(5) set indicates that the media type defining a primary function of the application for the policy advertised on the local port is guest voice signaling. Having the bit softPhoneVoice(6) set indicates that the media type Defining a primary function of the application for the policy advertised on the local port is softphone voice. Having the bit videoConferencing(7) set indicates that the media type defining a primary function of the application for the policy advertised on the local port is voice. Having the bit streamingVideo(8) set indicates that the media type defining a primary function of the application for the policy advertised on the local port is streaming video. Having the bit videoSignaling(2) set indicates that the media type defining a primary function of the application for the policy advertised on the local port is video signaling.
TEXTUAL-CONVENTION    
  BITS unknown(0), voice(1), voiceSignaling(2), guestVoice(3), guestVoiceSignaling(4), softPhoneVoice(5), videoconferencing(6), streamingVideo(7), videoSignaling(8)  

AtiStkSwTemperatureInfoEntry  
SEQUENCE    
  atiStkSwTemperatureInfoModuleId Integer32
  atiStkSwTemperatureInfoTemperature Integer32
  atiStkSwTemperatureInfoState DisplayString

AtiStkSwFanInfoEntry  
SEQUENCE    
  atiStkSwFanInfoModuleId Integer32
  atiStkSwFanInfoFan1Id Integer32
  atiStkSwFan1InfoState DisplayString
  atiStkSwFan1InfoSpeed Integer32
  atiStkSwFanInfoFan2Id Integer32
  atiStkSwFan2InfoState DisplayString
  atiStkSwFan2InfoSpeed Integer32

AtiStkSwPSUInfoEntry  
SEQUENCE    
  atiStkSwPSUInfoModuleId Integer32
  atiStkSwPSUInfoPSU1Id Integer32
  atiStkSwPSU1InfoState DisplayString
  atiStkSwPSU1InfoStatus DisplayString
  atiStkSwPSUInfoPSU2Id Integer32
  atiStkSwPSU2InfoState DisplayString
  atiStkSwPSU2InfoStatus DisplayString

AtiStkSwSysMgmtACLConfigEntry  
SEQUENCE    
  atiStkSwSysMgmtACLConfigModuleId Integer32
  atiStkSwSysMgmtACLConfigId Integer32
  atiStkSwSysMgmtACLConfigIpAddr IpAddress
  atiStkSwSysMgmtACLConfigMask IpAddress
  atiStkSwSysMgmtACLConfigApplication BITS
  atiStkSwSysMgmtACLConfigRowStatus RowStatus

AtiStkSwPortConfigEntry  
SEQUENCE    
  atiStkSwModuleId Integer32
  atiStkSwPortId Integer32
  atiStkSwPortName DisplayString
  atiStkSwPortState INTEGER
  atiStkSwPortLinkState INTEGER
  atiStkSwPortNegotiation INTEGER
  atiStkSwPortSpeed INTEGER
  atiStkSwPortDuplexStatus INTEGER
  atiStkSwPortFlowControl INTEGER
  atiStkSwPortBackPressure INTEGER
  atiStkSwPortPriority INTEGER
  atiStkSwPortBroadcastProcessing INTEGER
  atiStkSwPortMDIO INTEGER
  atiStkSwPortHOLLimit Integer32
  atiStkSwPortBackPressureLimit Integer32
  atiStkSwPortSTPState INTEGER

AtiStkPortSecurityConfigEntry  
SEQUENCE    
  atiStkPortSecurityThreshold Integer32
  atiStkPortIntrusionAction INTEGER
  atiStkPortSecurityAging INTEGER
  atiStkPortIntrusionActionStatus INTEGER

AtiStkPortDhcpIpConfigEntry  
SEQUENCE    
  atiStkPortDhcpIpOffer DisplayString
  atiStkPortDhcpIpAdd IpAddress
  atiStkPortDhcpIpDelete IpAddress

AtiStkSwIntrusionAttackEntry  
SEQUENCE    
  atiStkSwIntruderAttackVlanId Integer32
  atiStkSwIntruderAttackMacAddr MacAddress

AtiStkSwPortLoopProtectConfigEntry  
SEQUENCE    
  atiStkSwPortLoopProtectConfigStatus INTEGER
  atiStkSwPortLoopProtectConfigAction INTEGER
  atiStkSwPortLoopProtectConfigExpiry Integer32
  atiStkSwRxLDFModuleId Integer32
  atiStkSwRxLDFPortId Integer32
  atiStkSwRxLDFVlanId Integer32

AtiStkSwVlanConfigEntry  
SEQUENCE    
  atiStkSwVlanId Integer32
  atiStkSwVlanName DisplayString
  ipAddress DisplayString
  atiStkSwVlanVlanType INTEGER
  atiStkSwVlanTaggedPortList DisplayString
  atiStkSwVlanUntaggedPortList DisplayString
  atiStkSwVlanConfigEntryStatus INTEGER

AtiStkSwPort2VlanEntry  
SEQUENCE    
  atiStkSwPortIndex Integer32
  atiStkSwPortPortId DisplayString
  atiStkSwPortVlanId Integer32
  atiStkSwPortVlanName DisplayString

AtiStkSwMacAddr2VlanEntry  
SEQUENCE    
  atiStkSwMacEntry Integer32
  atiStkSwMacAddress MacAddress
  atiStkSwMacAddrVlanId Integer32
  atiStkSwMacAddrVlanName DisplayString
  atiStkSwMacAddrPortList DisplayString

AtiStkSwGVRPPortConfigEntry  
SEQUENCE    
  atiStkSwGVRPPortConfigModuleId Integer32
  atiStkSwGVRPPortConfigPortId Integer32
  atiStkSwGVRPPortConfigStatus INTEGER

AtiStkSwGVRPCountersEntry  
SEQUENCE    
  atiStkSwGVRPCountersModuleId Integer32
  atiStkSwGVRPCountersGARPRxPkt Counter32
  atiStkSwGVRPCountersInvalidGARPRxPkt Counter32
  atiStkSwGVRPCountersGARPTxPkt Counter32
  atiStkSwGVRPCountersGARPTxDisabled Counter32
  atiStkSwGVRPCountersPortNotSending Counter32
  atiStkSwGVRPCountersGARPDisabled Counter32
  atiStkSwGVRPCountersPortNotListening Counter32
  atiStkSwGVRPCountersInvalidPort Counter32
  atiStkSwGVRPCountersInvalidProtocol Counter32
  atiStkSwGVRPCountersInvalidFormat Counter32
  atiStkSwGVRPCountersDatabaseFull Counter32
  atiStkSwGVRPCountersRxMsgLeaveAll Counter32
  atiStkSwGVRPCountersRxMsgJoinEmpty Counter32
  atiStkSwGVRPCountersRxMsgJoinIn Counter32
  atiStkSwGVRPCountersRxMsgLeaveEmpty Counter32
  atiStkSwGVRPCountersRxMsgLeaveIn Counter32
  atiStkSwGVRPCountersRxMsgEmpty Counter32
  atiStkSwGVRPCountersRxMsgBadMsg Counter32
  atiStkSwGVRPCountersRxMsgBadAttribute Counter32
  atiStkSwGVRPCountersTxMsgLeaveAll Counter32
  atiStkSwGVRPCountersTxMsgJoinEmpty Counter32
  atiStkSwGVRPCountersTxMsgJoinIn Counter32
  atiStkSwGVRPCountersTxMsgLeaveEmpty Counter32
  atiStkSwGVRPCountersTxMsgLeaveIn Counter32
  atiStkSwGVRPCountersTxMsgEmpty Counter32

AtiStkSwStaticMacAddrEntry  
SEQUENCE    
  atiStkSwStaticEntry Integer32
  atiStkSwStaticMacAddress MacAddress
  atiStkSwStaticMacAddrVlanId Integer32
  atiStkSwStaticMacAddrModuleId Integer32
  atiStkSwStaticMacAddrPortId DisplayString
  atiStkSwStaticMacAddrDstMacState INTEGER
  atiStkSwStaticMacAddrEntryStatus INTEGER

AtiStkSwEthModuleMonEntry  
SEQUENCE    
  atiStkSwEthModuleMonId Integer32
  atiStkSwEthModuleMonTxGoodFrames Counter64
  atiStkSwEthModuleMonRxGoodFrames Counter64
  atiStkSwEthModuleMonTxTotalBytes Counter64
  atiStkSwEthModuleMonTxBroadcastFrames Counter64
  atiStkSwEthModuleMonTxMulticastFrames Counter64
  atiStkSwEthModuleMonRxOverrunFrames Counter64

AtiStkSwEthModuleErrEntry  
SEQUENCE    
  atiStkSwEthModuleErrId Integer32
  atiStkSwEthModuleErrRxCRC Counter64
  atiStkSwEthModuleErrRxBadFrames Counter64
  atiStkSwEthModuleErrCollisions Counter64

AtiStkSwEthPortMonEntry  
SEQUENCE    
  atiStkSwEthPortMonId Integer32
  atiStkSwEthPortMonTxGoodFrames Counter64
  atiStkSwEthPortMonRxGoodFrames Counter64
  atiStkSwEthPortMonTxTotalBytes Counter64
  atiStkSwEthPortMonTxBroadcastFrames Counter64
  atiStkSwEthPortMonTxMulticastFrames Counter64
  atiStkSwEthPortMonRxOverrunFrames Counter64

AtiStkSwEthPortErrEntry  
SEQUENCE    
  atiStkSwEthPortErrId Integer32
  atiStkSwEthPortErrRxBadFrames Counter64
  atiStkSwEthPortErrCollisions Counter64

AtiStkSwQosStatusEntry  
SEQUENCE    
  atiStkSwQosStatusPortId Integer32
  atiStkSwQosStatusStatus INTEGER

AtiStkSwQosInterfaceDetailsEntry  
SEQUENCE    
  atiStkSwQosInterfaceDetailsPortId Integer32
  atiStkSwQosInterfaceDetailsDefaultQueue Integer32
  atiStkSwQosInterfaceDetailsTrust INTEGER
  atiStkSwQosInterfaceDetailsSetCOS DisplayString
  atiStkSwQosInterfaceDetailsSetDSCP DisplayString
  atiStkSwQosInterfaceDetailsSchedularAndQueueWeightList DisplayString

AtiStkSwQosCosQueueMapEntry  
SEQUENCE    
  atiStkSwQosCosQueueMapPortId Integer32
  atiStkSwQosCosQueueMapCos0Queue Integer32
  atiStkSwQosCosQueueMapCos1Queue Integer32
  atiStkSwQosCosQueueMapCos2Queue Integer32
  atiStkSwQosCosQueueMapCos3Queue Integer32
  atiStkSwQosCosQueueMapCos4Queue Integer32
  atiStkSwQosCosQueueMapCos5Queue Integer32
  atiStkSwQosCosQueueMapCos6Queue Integer32
  atiStkSwQosCosQueueMapCos7Queue Integer32
  atiStkSwQosCosQueueMapDefaultMap INTEGER

AtiStkSwQosDscpQueueMapEntry  
SEQUENCE    
  atiStkSwQosDscpQueueMapPortId Integer32
  atiStkSwQosDscpQueueMapQueue0 DisplayString
  atiStkSwQosDscpQueueMapQueue1 DisplayString
  atiStkSwQosDscpQueueMapQueue2 DisplayString
  atiStkSwQosDscpQueueMapQueue3 DisplayString
  atiStkSwQosDscpQueueMapQueue4 DisplayString
  atiStkSwQosDscpQueueMapQueue5 DisplayString
  atiStkSwQosDscpQueueMapQueue6 DisplayString
  atiStkSwQosDscpQueueMapQueue7 DisplayString
  atiStkSwQosDscpQueueMapDefaultMap INTEGER

AtiStkSwStaticTrunkEntry  
SEQUENCE    
  atiStkSwStaticTrunkId Integer32
  atiStkSwStaticTrunkName DisplayString
  atiStkSwStaticTrunkMethod INTEGER
  atiStkSwStaticTrunkPortList DisplayString
  atiStkSwStaticTrunkStatus INTEGER

AtiStkSwACLConfigEntry  
SEQUENCE    
  atiStkSwACLId Integer32
  atiStkSwACLShowId Integer32
  atiStkSwACLStatus INTEGER
  atiStkSwACLAction INTEGER
  atiStkSwACLTrafficType INTEGER
  atiStkSwACLSrcType INTEGER
  atiStkSwACLSrcAddr IpAddress
  atiStkSwACLSrcMask IpAddress
  atiStkSwACLDestType INTEGER
  atiStkSwACLDestAddr IpAddress
  atiStkSwACLDestMask IpAddress
  atiStkSwACLVlanId Integer32
  atiStkSwACLProtocol Integer32
  atiStkSwACLICMPType Integer32
  atiStkSwACLUDPTCPSrcPort INTEGER
  atiStkSwACLSrcPort1 Integer32
  atiStkSwACLSrcPort2 Integer32
  atiStkSwACLUDPTCPDestPort INTEGER
  atiStkSwACLDestPort1 Integer32
  atiStkSwACLDestPort2 Integer32

AtiStkSwACLMACConfigEntry  
SEQUENCE    
  atiStkSwACLMACId Integer32
  atiStkSwACLMACShowId Integer32
  atiStkSwACLMACStatus INTEGER
  atiStkSwACLMACAction INTEGER
  atiStkSwACLMACSrc INTEGER
  atiStkSwACLMACDest INTEGER
  atiStkSwACLMACSrcMac DisplayString
  atiStkSwACLMACSrcMacMask DisplayString
  atiStkSwACLMACDestMac DisplayString
  atiStkSwACLMACDestMacMask DisplayString

AtiStkSwACLInterfaceConfigEntry  
SEQUENCE    
  atiStkSwACLInterfaceModuleId Integer32
  atiStkSwACLInterfacePortId Integer32
  atiStkSwACLInterfacaeACLId DisplayString
  atiStkSwACLInterfacaeAddACLId Integer32
  atiStkSwACLInterfacaeRemoveACLId Integer32

AtiStkSwAACLIpv4ConfigEntry  
SEQUENCE    
  atiStkSwAACLId Integer32
  atiStkSwAACLStatus INTEGER
  atiStkSwAACLName DisplayString
  atiStkSwAACLAction INTEGER
  atiStkSwAACLTrafficType INTEGER
  atiStkSwAACLSrcType INTEGER
  atiStkSwAACLSrcAddr IpAddress
  atiStkSwAACLSrcMask IpAddress
  atiStkSwAACLDestType INTEGER
  atiStkSwAACLDestAddr IpAddress
  atiStkSwAACLDestMask IpAddress
  atiStkSwAACLVlanId Integer32
  atiStkSwAACLProtocol Integer32
  atiStkSwAACLICMPType Integer32
  atiStkSwAACLUDPTCPSrcPort INTEGER
  atiStkSwAACLSrcPort1 Integer32
  atiStkSwAACLSrcPort2 Integer32
  atiStkSwAACLUDPTCPDestPort INTEGER
  atiStkSwAACLDestPort1 Integer32
  atiStkSwAACLDestPort2 Integer32
  atiStkSwAACLTimeRange DisplayString

AtiStkSwAACLIpv6ConfigEntry  
SEQUENCE    
  atiStkSwAACLv6Id Integer32
  atiStkSwAACLv6Status INTEGER
  atiStkSwAACLv6Name DisplayString
  atiStkSwAACLv6Action INTEGER
  atiStkSwAACLv6TrafficType INTEGER
  atiStkSwAACLv6SrcType INTEGER
  atiStkSwAACLv6SrcAddr DisplayString
  atiStkSwAACLv6SrcMask DisplayString
  atiStkSwAACLv6DestType INTEGER
  atiStkSwAACLv6DestAddr DisplayString
  atiStkSwAACLv6DestMask DisplayString
  atiStkSwAACLv6VlanId Integer32
  atiStkSwAACLv6Protocol Integer32
  atiStkSwAACLv6ICMPType Integer32
  atiStkSwAACLv6UDPTCPSrcPort INTEGER
  atiStkSwAACLv6SrcPort1 Integer32
  atiStkSwAACLv6SrcPort2 Integer32
  atiStkSwAACLv6UDPTCPDestPort INTEGER
  atiStkSwAACLv6DestPort1 Integer32
  atiStkSwAACLv6DestPort2 Integer32
  atiStkSwAACLv6TimeRange DisplayString

AtiStkSwAACLInterfaceConfigEntry  
SEQUENCE    
  atiStkSwAACLInterfaceModuleId Integer32
  atiStkSwAACLInterfacePortId Integer32
  atiStkSwAACLInterfacaeACLName DisplayString
  atiStkSwAACLInterfacaeAddACLName DisplayString
  atiStkSwAACLInterfacaeRemoveACLName DisplayString

AtiStkSwAACLTimeRangeConfigEntry  
SEQUENCE    
  atiStkSwAACLTimeRangeEntry Integer32
  atiStkSwAACLTimeRangeName DisplayString
  atiStkSwAACLTimeRangeType INTEGER
  atiStkSwAACLTimeRangeAbsoluteStartTime DisplayString
  atiStkSwAACLTimeRangeAbsoluteEndTime DisplayString
  atiStkSwAACLTimeRangePeriodicFrequency INTEGER
  atiStkSwAACLTimeRangePeriodicStartDay INTEGER
  atiStkSwAACLTimeRangePeriodicEndDay INTEGER
  atiStkSwAACLTimeRangePeriodicStartTime DisplayString
  atiStkSwAACLTimeRangePeriodicEndTime DisplayString
  atiStkSwAACLTimeRangeStatus INTEGER

AtiStkSwAACLIPV4MACConfigEntry  
SEQUENCE    
  atiStkSwAACLIPV4MACId Integer32
  atiStkSwAACLIPV4MACName DisplayString
  atiStkSwAACLIPV4MACStatus INTEGER
  atiStkSwAACLIPV4MACAction INTEGER
  atiStkSwAACLIPV4MACSrc INTEGER
  atiStkSwAACLIPV4MACDest INTEGER
  atiStkSwAACLIPV4MACSrcMac DisplayString
  atiStkSwAACLIPV4MACSrcMacMask DisplayString
  atiStkSwAACLIPV4MACDestMac DisplayString
  atiStkSwAACLIPV4MACDestMacMask DisplayString
  atiStkSwAACLIPV4MACVlanId Integer32
  atiStkSwAACLIPV4MACTimeRange DisplayString

AtiStkSwMSTPMstInstanceConfigEntry  
SEQUENCE    
  atiStkSwMSTPMstInstanceId Integer32
  atiStkSwMSTPMstInstanceVlan Integer32
  atiStkSwMSTPMstInstancePriority Integer32

AtiStkSwMSTPMstInterfaceConfigEntry  
SEQUENCE    
  atiStkSwMSTPMstInterfaceModuleId Integer32
  atiStkSwMSTPMstInterfacePortId Integer32
  atiStkSwMSTPMstInterfaceInstanceId Integer32
  atiStkSwMSTPMstInterfacePathCost Integer32
  atiStkSwMSTPMstInterfacePriority Integer32

AtiStkSwMVRInterfaceConfigEntry  
SEQUENCE    
  atiStkSwMVRInterfaceIndex Integer32
  atiStkSwMVRInterfacePortId DisplayString
  atiStkSwMVRInterfaceType INTEGER

AtiStkSwMVRConfigGroupIpEntry  
SEQUENCE    
  atiStkSwMVRGroupIpIndex Integer32
  atiStkSwMVRGroupIp DisplayString

AtiStkSwPSTACKInterfaceConfigEntry  
SEQUENCE    
  atiStkSwPSTACKInterfaceDeviceId Integer32
  atiStkSwPSTACKInterfaceMacAddress MacAddress
  atiStkSwPSTACKInterfaceSwVersion DisplayString
  atiStkSwPSTACKInterfaceModel DisplayString

AtiStkSwLldpConfigPortEntry  
SEQUENCE    
  atiStkSwLldpConfigModuleId Integer32
  atiStkSwLldpConfigPortId Integer32
  atiStkSwLldpConfigDirection INTEGER
  atiStkSwLldpConfigNotif INTEGER
  atiStkSwLldpConfigMgmtAddr IpAddress
  atiStkSwLldpConfigTlvSelect BITS
  atiStkSwLldpConfigTlvDeselect BITS
  atiStkSwLldpConfigMedNotif INTEGER
  atiStkSwLldpConfigMedTlvSelect BITS
  atiStkSwLldpConfigMedTlvDeselect BITS
  atiStkSwLldpConfigLocCoord Integer32
  atiStkSwLldpConfigLocCivic Integer32
  atiStkSwLldpConfigLocElin Integer32

AtiStkSwLldpStatsPortEntry  
SEQUENCE    
  atiStkSwLldpStatsModuleId Integer32
  atiStkSwLldpStatsPortId Integer32
  atiStkSwLldpStatsFramesOut Counter32
  atiStkSwLldpStatsFramesIn Counter32
  atiStkSwLldpStatsFramesInError Counter32
  atiStkSwLldpStatsFramesInDropped Counter32
  atiStkSwLldpStatsTLVsUnrecognized Counter32
  atiStkSwLldpStatsTLVsDiscarded Counter32
  atiStkSwLldpStatsNewNeighbors Counter32
  atiStkSwLldpStatsNeighborsDeleted Counter32
  atiStkSwLldpStatsNeighborsDropped Counter32
  atiStkSwLldpStatsNeighborsAgedOut Counter32
  atiStkSwLldpStatsReset INTEGER

AtiStkSwLldpLocalInfoEntry  
SEQUENCE    
  atiStkSwLldpLocModuleId Integer32
  atiStkSwLldpLocPortNum Integer32
  atiStkSwLldpLocChassisIdSubtype INTEGER
  atiStkSwLldpLocChassisId DisplayString
  atiStkSwLldpLocPortIdSubtype INTEGER
  atiStkSwLldpLocPortId DisplayString
  atiStkSwLldpLocTtl Integer32
  atiStkSwLldpLocPortDesc DisplayString
  atiStkSwLldpLocSysName DisplayString
  atiStkSwLldpLocSysDesc DisplayString
  atiStkSwLldpLocSysCapSupported BITS
  atiStkSwLldpLocSysCapEnabled BITS
  atiStkSwLldpLocManAddrSubtype INTEGER
  atiStkSwLldpLocManAddr IpAddress
  atiStkSwLldpLocManAddrLen Integer32
  atiStkSwLldpLocManAddrIfSubtype INTEGER
  atiStkSwLldpLocManAddrIfId Integer32
  atiStkSwLldpLocManAddrOID OBJECT IDENTIFIER

AtiStkSwLldpDot1LocEntry  
SEQUENCE    
  atiStkSwLldpDot1LocModuleId Integer32
  atiStkSwLldpDot1LocPortNum Integer32
  atiStkSwLldpDot1LocPortVlanId Integer32
  atiStkSwLldpDot1LocProtoVlanId Integer32
  atiStkSwLldpDot1LocProtoVlanSupported INTEGER
  atiStkSwLldpDot1LocProtoVlanEnabled INTEGER
  atiStkSwLldpDot1LocVlanId DisplayString
  atiStkSwLldpDot1LocVlanName DisplayString
  atiStkSwLldpDot1LocProtocolId DisplayString

AtiStkSwLldpDot3LocEntry  
SEQUENCE    
  atiStkSwLldpDot3LocModuleId Integer32
  atiStkSwLldpDot3LocPortNum Integer32
  atiStkSwLldpDot3LocPortAutoNegSupported INTEGER
  atiStkSwLldpDot3LocPortAutoNegEnabled INTEGER
  atiStkSwLldpDot3LocPortAutoNegAdvertisedCap BITS
  atiStkSwLldpDot3LocPortOperMauType INTEGER
  atiStkSwLldpDot3LocPowerPortClass INTEGER
  atiStkSwLldpDot3LocPowerMDISupported INTEGER
  atiStkSwLldpDot3LocPowerMDIEnabled INTEGER
  atiStkSwLldpDot3LocPowerPairControlable INTEGER
  atiStkSwLldpDot3LocPowerPairs Integer32
  atiStkSwLldpDot3LocPowerClass Integer32
  atiStkSwLldpDot3LocLinkAggStatus BITS
  atiStkSwLldpDot3LocLinkAggPortId Integer32
  atiStkSwLldpDot3LocMaxFrameSize Integer32

AtiStkSwLldpMedLocEntry  
SEQUENCE    
  atiStkSwLldpMedLocModuleId Integer32
  atiStkSwLldpMedLocPortNum Integer32
  atiStkSwLldpMedLocDeviceClass AtiStkSwLldpMedDeviceClass
  atiStkSwLldpMedLocCapabilities AtiStkSwLldpMedCapabilities
  atiStkSwLldpMedLocMediaPolicyAppType PolicyAppType
  atiStkSwLldpMedLocMediaPolicyPriority Integer32
  atiStkSwLldpMedLocMediaPolicyDscp Integer32
  atiStkSwLldpMedLocMediaPolicyUnknown TruthValue
  atiStkSwLldpMedLocMediaPolicyTagged TruthValue
  atiStkSwLldpMedLocHardwareRev DisplayString
  atiStkSwLldpMedLocFirmwareRev DisplayString
  atiStkSwLldpMedLocSoftwareRev DisplayString
  atiStkSwLldpMedLocSerialNum DisplayString
  atiStkSwLldpMedLocMfgName DisplayString
  atiStkSwLldpMedLocModelName DisplayString
  atiStkSwLldpMedLocAssetID DisplayString
  atiStkSwLldpMedLocCoordLocation DisplayString
  atiStkSwLldpMedLocCivicLocation DisplayString
  atiStkSwLldpMedLocElinLocation DisplayString

AtiStkSwLldpRemBaseEntry  
SEQUENCE    
  atiStkSwLldpRemModuleNum Integer32
  atiStkSwLldpRemPortNum Integer32
  atiStkSwLldpRemIndex Integer32
  atiStkSwLldpRemChassisIdSubtype INTEGER
  atiStkSwLldpRemChassisId DisplayString
  atiStkSwLldpRemPortIdSubtype INTEGER
  atiStkSwLldpRemPortId DisplayString
  atiStkSwLldpRemTtl Integer32
  atiStkSwLldpRemPortDesc DisplayString
  atiStkSwLldpRemSysName DisplayString
  atiStkSwLldpRemSysDesc DisplayString
  atiStkSwLldpRemSysCapSupported BITS
  atiStkSwLldpRemSysCapEnabled BITS
  atiStkSwLldpRemManAddrSubtype INTEGER
  atiStkSwLldpRemManAddr IpAddress
  atiStkSwLldpRemManAddrIfSubtype INTEGER
  atiStkSwLldpRemManAddrIfId Integer32
  atiStkSwLldpRemManAddrOID OBJECT IDENTIFIER

AtiStkSwLldpDot1RemEntry  
SEQUENCE    
  atiStkSwLldpDot1RemModuleId Integer32
  atiStkSwLldpDot1RemPortNum Integer32
  atiStkSwLldpDot1RemIndex Integer32
  atiStkSwLldpDot1RemPortVlanId Integer32
  atiStkSwLldpDot1RemProtoVlanId Integer32
  atiStkSwLldpDot1RemProtoVlanSupported INTEGER
  atiStkSwLldpDot1RemProtoVlanEnabled INTEGER
  atiStkSwLldpDot1RemVlanId DisplayString
  atiStkSwLldpDot1RemVlanName DisplayString
  atiStkSwLldpDot1RemProtocolId DisplayString

AtiStkSwLldpDot3RemEntry  
SEQUENCE    
  atiStkSwLldpDot3RemModuleNum Integer32
  atiStkSwLldpDot3RemPortNum Integer32
  atiStkSwLldpDot3RemIndex Integer32
  atiStkSwLldpDot3RemPortAutoNegSupported INTEGER
  atiStkSwLldpDot3RemPortAutoNegEnabled INTEGER
  atiStkSwLldpDot3RemPortAutoNegAdvertisedCap BITS
  atiStkSwLldpDot3RemPortOperMauType INTEGER
  atiStkSwLldpDot3RemPowerPortClass INTEGER
  atiStkSwLldpDot3RemPowerMDISupported INTEGER
  atiStkSwLldpDot3RemPowerMDIEnabled INTEGER
  atiStkSwLldpDot3RemPowerPairControlable INTEGER
  atiStkSwLldpDot3RemPowerPairs Integer32
  atiStkSwLldpDot3RemPowerClass Integer32
  atiStkSwLldpDot3RemLinkAggStatus BITS
  atiStkSwLldpDot3RemLinkAggPortId Integer32
  atiStkSwLldpDot3RemMaxFrameSize Integer32

AtiStkSwLldpMedRemEntry  
SEQUENCE    
  atiStkSwLldpMedRemModuleId Integer32
  atiStkSwLldpMedRemPortNum Integer32
  atiStkSwLldpMedRemIndex Integer32
  atiStkSwLldpMedRemDeviceClass AtiStkSwLldpMedDeviceClass
  atiStkSwLldpMedRemCapabilities AtiStkSwLldpMedCapabilities
  atiStkSwLldpMedRemMediaPolicyAppType PolicyAppType
  atiStkSwLldpMedRemMediaPolicyVlanID Integer32
  atiStkSwLldpMedRemMediaPolicyPriority Integer32
  atiStkSwLldpMedRemMediaPolicyDscp Integer32
  atiStkSwLldpMedRemMediaPolicyUnknown TruthValue
  atiStkSwLldpMedRemMediaPolicyTagged TruthValue
  atiStkSwLldpMedRemHardwareRev DisplayString
  atiStkSwLldpMedRemFirmwareRev DisplayString
  atiStkSwLldpMedRemSoftwareRev DisplayString
  atiStkSwLldpMedRemSerialNum DisplayString
  atiStkSwLldpMedRemMfgName DisplayString
  atiStkSwLldpMedRemModelName DisplayString
  atiStkSwLldpMedRemAssetID DisplayString
  atiStkSwLldpMedRemXPoEDeviceType INTEGER
  atiStkSwLldpMedRemXPoEPSEPowerAv Gauge32
  atiStkSwLldpMedRemXPoEPSEPowerSource INTEGER
  atiStkSwLldpMedRemXPoEPSEPowerPriority INTEGER
  atiStkSwLldpMedRemXPoEPDPowerReq Gauge32
  atiStkSwLldpMedRemXPoEPDPowerSource INTEGER
  atiStkSwLldpMedRemXPoEPDPowerPriority INTEGER
  atiStkSwLldpMedRemCoordLocation DisplayString
  atiStkSwLldpMedRemCivicLocation DisplayString
  atiStkSwLldpMedRemElinLocation DisplayString

AtiStkSwLldpRemResetEntry  
SEQUENCE    
  atiStkSwLldpRemResetModuleNum Integer32
  atiStkSwLldpRemResetPortNum Integer32
  atiStkSwLldpRemReset INTEGER

AtiStkSwLldpCivicLocationEntry  
SEQUENCE    
  atiStkSwLldpCivicLocationIdentifier Integer32
  atiStkSwLldpCivicLocationValid INTEGER

AtiStkSwLldpCoordLocationEntry  
SEQUENCE    
  atiStkSwLldpCoordLocationIdentifier Integer32
  atiStkSwLldpCoordLocationValid INTEGER

AtiStkSwLldpElinLocationEntry  
SEQUENCE    
  atiStkSwLldpElinLocationIdentifier Integer32
  atiStkSwLldpElinLocationElinId DisplayString

AtiStkSwLldpSetCivicLocationEntry  
SEQUENCE    
  atiStkSwLldpSetCivicLocationIdentifier Integer32
  atiStkSwLldpSetCivicLocationCountry DisplayString
  atiStkSwLldpSetCivicLocationState DisplayString
  atiStkSwLldpSetCivicLocationCounty DisplayString
  atiStkSwLldpSetCivicLocationCity DisplayString
  atiStkSwLldpSetCivicLocationDivision DisplayString
  atiStkSwLldpSetCivicLocationNeighborhood DisplayString
  atiStkSwLldpSetCivicLocationStreetGroup DisplayString
  atiStkSwLldpSetCivicLocationLeadingStreetDirection DisplayString
  atiStkSwLldpSetCivicLocationTrailingStreetDirection DisplayString
  atiStkSwLldpSetCivicLocationStreetSuffix DisplayString
  atiStkSwLldpSetCivicLocationHouseNumber DisplayString
  atiStkSwLldpSetCivicLocationHouseNumberSuffix DisplayString
  atiStkSwLldpSetCivicLocationLandmark DisplayString
  atiStkSwLldpSetCivicLocationAdditionalInformation DisplayString
  atiStkSwLldpSetCivicLocationName DisplayString
  atiStkSwLldpSetCivicLocationPostalCode DisplayString
  atiStkSwLldpSetCivicLocationBuilding DisplayString
  atiStkSwLldpSetCivicLocationUnit DisplayString
  atiStkSwLldpSetCivicLocationFloor DisplayString
  atiStkSwLldpSetCivicLocationRoom DisplayString
  atiStkSwLldpSetCivicLocationPlaceType DisplayString
  atiStkSwLldpSetCivicLocationPostalCommunityName DisplayString
  atiStkSwLldpSetCivicLocationPostOfficeBox DisplayString
  atiStkSwLldpSetCivicLocationAdditionalCode DisplayString
  atiStkSwLldpSetCivicLocationSeat DisplayString
  atiStkSwLldpSetCivicLocationPrimaryRoadName DisplayString
  atiStkSwLldpSetCivicLocationRoadSection DisplayString
  atiStkSwLldpSetCivicLocationBranchRoadName DisplayString
  atiStkSwLldpSetCivicLocationSubBranchRoadName DisplayString
  atiStkSwLldpSetCivicLocationStreetNamePreModifier DisplayString
  atiStkSwLldpSetCivicLocationStreetNamePostModifier DisplayString
  atiStkSwLldpSetCivicLocationCreateDeleteIdentifier INTEGER

AtiStkSwLldpSetCoordLocationEntry  
SEQUENCE    
  atiStkSwLldpSetCoordLocationIdentifier Integer32
  atiStkSwLldpSetCoordLocationLatitude DisplayString
  atiStkSwLldpSetCoordLocationLatResolution Integer32
  atiStkSwLldpSetCoordLocationLongitude DisplayString
  atiStkSwLldpSetCoordLocationLongiResolution Integer32
  atiStkSwLldpSetCoordLocationAltitude DisplayString
  atiStkSwLldpSetCoordLocationAltType INTEGER
  atiStkSwLldpSetCoordLocationAltResolution Integer32
  atiStkSwLldpSetCoordLocationDatum INTEGER

AtiSflowRcvrEntry  
SEQUENCE    
  atiSflowRcvrIndex Integer32
  atiSflowRcvrAddress IpAddress
  atiSflowRcvrPort Integer32

AtiSflowFsEntry  
SEQUENCE    
  atiSflowFsPort Integer32
  atiSflowFsPacketSamplingRate Integer32

AtiSflowCpEntry  
SEQUENCE    
  atiSflowCpPort Integer32
  atiSflowCpInterval Integer32

AtiSflowSetEntry  
SEQUENCE    
  atiSflowSetIndex Integer32
  atiSflowSetAddress IpAddress
  atiSflowSetPort Integer32
  atiSflowSetStatus INTEGER

AtiSflowEnableEntry  
SEQUENCE    
  atiSflowEnablePort Integer32
  atiSflowEnableStatus INTEGER

AtiAQosPortConfigurationEntry  
SEQUENCE    
  atiAQosPortConfigurationPortId Integer32
  atiAQosPortConfigurationStatus INTEGER
  atiAQosPortConfigurationDefaultQueue Integer32
  atiAQosPortConfigurationSchedularAndQueueWeightList DisplayString
  atiAQosPortConfigurationWRREgressRateQ0 Integer32
  atiAQosPortConfigurationWRREgressRateQ1 Integer32
  atiAQosPortConfigurationWRREgressRateQ2 Integer32
  atiAQosPortConfigurationWRREgressRateQ3 Integer32
  atiAQosPortConfigurationWRREgressRateQ4 Integer32
  atiAQosPortConfigurationWRREgressRateQ5 Integer32
  atiAQosPortConfigurationWRREgressRateQ6 Integer32
  atiAQosPortConfigurationWRREgressRateQ7 Integer32

AtiAQosCosQueueMapEntry  
SEQUENCE    
  atiAQosCosQueueMapPortId Integer32
  atiAQosCosQueueMapCos0Queue Integer32
  atiAQosCosQueueMapCos1Queue Integer32
  atiAQosCosQueueMapCos2Queue Integer32
  atiAQosCosQueueMapCos3Queue Integer32
  atiAQosCosQueueMapCos4Queue Integer32
  atiAQosCosQueueMapCos5Queue Integer32
  atiAQosCosQueueMapCos6Queue Integer32
  atiAQosCosQueueMapCos7Queue Integer32
  atiAQosCosQueueMapDefaultMap INTEGER

AtiAQosDscpQueueMapEntry  
SEQUENCE    
  atiAQosDscpQueueMapPortId Integer32
  atiAQosDscpQueueMapQueue0 DisplayString
  atiAQosDscpQueueMapQueue1 DisplayString
  atiAQosDscpQueueMapQueue2 DisplayString
  atiAQosDscpQueueMapQueue3 DisplayString
  atiAQosDscpQueueMapQueue4 DisplayString
  atiAQosDscpQueueMapQueue5 DisplayString
  atiAQosDscpQueueMapQueue6 DisplayString
  atiAQosDscpQueueMapQueue7 DisplayString
  atiAQosDscpQueueMapDefaultMap INTEGER

AtiAQosAggregatePolicerEntry  
SEQUENCE    
  atiAQosAggregatePolicerIndex Integer32
  atiAQosAggregatePolicerName DisplayString
  atiAQosAggregatePolicerRate INTEGER
  atiAQosAggregatePolicerCIRkbps Integer32
  atiAQosAggregatePolicerCBSb Integer32
  atiAQosAggregatePolicerPIRkbps Integer32
  atiAQosAggregatePolicerPBSb Integer32
  atiAQosAggregatePolicerAction INTEGER

AtiAQosInterfacePolicyEntry  
SEQUENCE    
  atiAQosInterfacePolicyPortId Integer32
  atiAQosInterfacePolicyMapName DisplayString

AtiAQosPolicyMapEntry  
SEQUENCE    
  atiAQosPolicyMapIndex Integer32
  atiAQosPolicyMapPolicyName DisplayString
  atiAQosPolicyMapClassName DisplayString
  atiAQosPolicyMapDefaultAction INTEGER
  atiAQosPolicyMapCosAction INTEGER
  atiAQosPolicyMapDscpAction DisplayString
  atiAQosPolicyMapIpNextHopAction IpAddress
  atiAQosPolicyMapQueueAction Integer32
  atiAQosPolicyMapTrustAction INTEGER
  atiAQosPolicyMapPoliceAggregateAction DisplayString
  atiAQosPolicyMapStormAction INTEGER
  atiAQosPolicyMapStormDowntimeAction Integer32
  atiAQosPolicyMapStormRateAction Integer32
  atiAQosPolicyMapStormWindowAction Integer32

AtiAQosClassMapEntry  
SEQUENCE    
  atiAQosClassMapIndex Integer32
  atiAQosClassMapClassName DisplayString
  atiAQosClassMapAccessGroupMatch DisplayString
  atiAQosClassMapCosMatch DisplayString
  atiAQosClassMapDscpMatch DisplayString
  atiAQosClassMapInnerCosMatch DisplayString
  atiAQosClassMapInnerVlanMatch DisplayString
  atiAQosClassMapIpPrecedenceMatch DisplayString
  atiAQosClassMapMacTypeMatch INTEGER
  atiAQosClassVlanMatch DisplayString
  atiAQosClassTcpFlagsMatch INTEGER
  atiAQosClassL2FormatMatch DisplayString
  atiAQosClassL3ProtocolMatch DisplayString

AtiStkSwDhcpPoolEntry  
SEQUENCE    
  atiDhcpPoolId Integer32
  atiDhcpPoolName DisplayString
  atiDhcpPoolNetwork IpAddress
  atiDhcpPoolNetmask IpAddress
  atiDhcpPoolSubnetmask IpAddress
  atiDhcpPoolRangeList DisplayString
  atiDhcpPoolExpireTime Integer32
  atiDhcpPoolRouterList DisplayString
  atiDhcpPoolDNSSvrList DisplayString
  atiDhcpPoolDomainName DisplayString
  atiDhcpPoolIpAdd IpAddress
  atiDhcpPoolIpDelete IpAddress
  atiDhcpPoolRouterAdd IpAddress
  atiDhcpPoolRouterDelete IpAddress
  atiDhcpPoolDNSAdd IpAddress
  atiDhcpPoolDNSDelete IpAddress

AtiStkSwDhcpBindingEntry  
SEQUENCE    
  atiDhcpBindingId Integer32
  atiDhcpClientMacAddress MacAddress
  atiDhcpPortNumber DisplayString
  atiDhcpIpAddress IpAddress
  atiDhcpExpireTime DisplayString

Defined Values

alliedTelesis 1.3.6.1.4.1.207
Private MIB for ATI layer 2 stackable switches. This MIB can be used in Windows and UNIX environments.
MODULE-IDENTITY    

mibObject 1.3.6.1.4.1.207.8
OBJECT IDENTIFIER    

atiStkSwMib 1.3.6.1.4.1.207.8.17
OBJECT IDENTIFIER    

atiProduct 1.3.6.1.4.1.207.1
OBJECT IDENTIFIER    

swhub 1.3.6.1.4.1.207.1.4
OBJECT IDENTIFIER    

at-9000-28 1.3.6.1.4.1.207.1.4.148
OBJECT IDENTIFIER    

at-9000-28SP 1.3.6.1.4.1.207.1.4.149
OBJECT IDENTIFIER    

at-9000-28POE 1.3.6.1.4.1.207.1.4.150
OBJECT IDENTIFIER    

at-9000-52 1.3.6.1.4.1.207.1.4.151
OBJECT IDENTIFIER    

at-9000-12POE 1.3.6.1.4.1.207.1.4.207
OBJECT IDENTIFIER    

at-8100S-24 1.3.6.1.4.1.207.1.4.169
OBJECT IDENTIFIER    

at-8100S-24C 1.3.6.1.4.1.207.1.4.170
OBJECT IDENTIFIER    

at-8100S-24POE 1.3.6.1.4.1.207.1.4.171
OBJECT IDENTIFIER    

at-8100S-48 1.3.6.1.4.1.207.1.4.172
OBJECT IDENTIFIER    

at-8100S-48POE 1.3.6.1.4.1.207.1.4.173
OBJECT IDENTIFIER    

at-8100S-16F8-SC 1.3.6.1.4.1.207.1.4.174
OBJECT IDENTIFIER    

at-8100S-24F-LC 1.3.6.1.4.1.207.1.4.175
OBJECT IDENTIFIER    

at-8100S-16F8-LC 1.3.6.1.4.1.207.1.4.176
OBJECT IDENTIFIER    

at-8100-8 1.3.6.1.4.1.207.1.4.177
OBJECT IDENTIFIER    

at-8100-8POE 1.3.6.1.4.1.207.1.4.178
OBJECT IDENTIFIER    

at-8100S-24F-SC 1.3.6.1.4.1.207.1.4.206
OBJECT IDENTIFIER    

at-8100S-24DC 1.3.6.1.4.1.207.1.4.208
OBJECT IDENTIFIER    

at-FS970M-24C 1.3.6.1.4.1.207.1.4.233
OBJECT IDENTIFIER    

at-FS970M-8 1.3.6.1.4.1.207.1.4.234
OBJECT IDENTIFIER    

at-FS970M-8PS 1.3.6.1.4.1.207.1.4.235
OBJECT IDENTIFIER    

at-FS970M-24PS 1.3.6.1.4.1.207.1.4.236
OBJECT IDENTIFIER    

at-FS970M-48 1.3.6.1.4.1.207.1.4.237
OBJECT IDENTIFIER    

at-FS970M-48PS 1.3.6.1.4.1.207.1.4.238
OBJECT IDENTIFIER    

at-FS970M-16F8-LC 1.3.6.1.4.1.207.1.4.239
OBJECT IDENTIFIER    

at-FS970M-24LPS 1.3.6.1.4.1.207.1.4.240
OBJECT IDENTIFIER    

at-FS970M-24F 1.3.6.1.4.1.207.1.4.241
OBJECT IDENTIFIER    

at-FS970M-16F8-SC 1.3.6.1.4.1.207.1.4.242
OBJECT IDENTIFIER    

routerSwitch 1.3.6.1.4.1.207.1.14
OBJECT IDENTIFIER    

at-9924T-EMC 1.3.6.1.4.1.207.1.14.53
OBJECT IDENTIFIER    

atiStkSwSysGroup 1.3.6.1.4.1.207.8.17.1
OBJECT IDENTIFIER    

atiStkSwPortGroup 1.3.6.1.4.1.207.8.17.2
OBJECT IDENTIFIER    

atiStkSwVlanGroup 1.3.6.1.4.1.207.8.17.3
OBJECT IDENTIFIER    

atiStkSwMacAddrGroup 1.3.6.1.4.1.207.8.17.4
OBJECT IDENTIFIER    

atiStkSwEthStatsGroup 1.3.6.1.4.1.207.8.17.5
OBJECT IDENTIFIER    

atiStkSwTrapsGroup 1.3.6.1.4.1.207.8.17.6
OBJECT IDENTIFIER    

atiStkSwQoSGroup 1.3.6.1.4.1.207.8.17.7
OBJECT IDENTIFIER    

atiStkSwTrunkGroup 1.3.6.1.4.1.207.8.17.8
OBJECT IDENTIFIER    

atiStkSwACLGroup 1.3.6.1.4.1.207.8.17.9
OBJECT IDENTIFIER    

atiStkSwLldpGroup 1.3.6.1.4.1.207.8.17.10
OBJECT IDENTIFIER    

atiSflowRcvrGroup 1.3.6.1.4.1.207.8.17.11
OBJECT IDENTIFIER    

atiSflowFsGroup 1.3.6.1.4.1.207.8.17.12
OBJECT IDENTIFIER    

atiSflowCpGroup 1.3.6.1.4.1.207.8.17.13
OBJECT IDENTIFIER    

atiSflowSetGroup 1.3.6.1.4.1.207.8.17.14
OBJECT IDENTIFIER    

atiSflowEnableGroup 1.3.6.1.4.1.207.8.17.15
OBJECT IDENTIFIER    

atiStkSwAQoSGroup 1.3.6.1.4.1.207.8.17.17
OBJECT IDENTIFIER    

atiStkSwAACLGroup 1.3.6.1.4.1.207.8.17.18
OBJECT IDENTIFIER    

atiStkSwMSTPGroup 1.3.6.1.4.1.207.8.17.19
OBJECT IDENTIFIER    

atiStkSwMVRGroup 1.3.6.1.4.1.207.8.17.20
OBJECT IDENTIFIER    

atiStkSwPSTACKGroup 1.3.6.1.4.1.207.8.17.21
OBJECT IDENTIFIER    

atiStkSwDhcpSvrGroup 1.3.6.1.4.1.207.8.17.22
OBJECT IDENTIFIER    

atiStkSwSysConfig 1.3.6.1.4.1.207.8.17.1.1
OBJECT IDENTIFIER    

atiStkSwSysNwMgmt 1.3.6.1.4.1.207.8.17.1.2
OBJECT IDENTIFIER    

atiStkSwSysSystemTimeConfig 1.3.6.1.4.1.207.8.17.1.5
OBJECT IDENTIFIER    

atiStkSwSysInfoGroup 1.3.6.1.4.1.207.8.17.1.6
OBJECT IDENTIFIER    

atiStkSwSysMgmtACLGroup 1.3.6.1.4.1.207.8.17.1.7
OBJECT IDENTIFIER    

atiStkSwSysReset 1.3.6.1.4.1.207.8.17.1.1.1
Setting this object to 'reset' will cause the switch to perform a soft reboot. Setting this object to 'no-reset' will have no effect.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no-reset(1), reset(2)  

atiStkSwSysIpAddress 1.3.6.1.4.1.207.8.17.1.1.2
The IP address of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

atiStkSwSysSubnetMask 1.3.6.1.4.1.207.8.17.1.1.3
The subnet mask of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

atiStkSwSysGateway 1.3.6.1.4.1.207.8.17.1.1.4
The IP address of the gateway for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwSysIpAddressStatus 1.3.6.1.4.1.207.8.17.1.1.5
This object specifies how the IP address, subnet mask and the gateway address currently in use on the switch was obtained/configured.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fromDhcp(1), fromBootp(2), static(3)  

atiStkSwSysDnsServer 1.3.6.1.4.1.207.8.17.1.1.6
This object specifies the IP address of the DNS server for the switch. This MIB is not applicable to the 85xx and 94xx family of ATI switches.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

atiStkSwSysDefaultDomainName 1.3.6.1.4.1.207.8.17.1.1.7
This object specifies the default domain name for the switch. This MIB is not applicable to the 85xx and 94xx family of ATI switches.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwSysNumberOfModules 1.3.6.1.4.1.207.8.17.1.1.8
This object gives a count of the number of modules present in the stackable switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwSysSpanningTreeStatus 1.3.6.1.4.1.207.8.17.1.1.9
Setting this object to 'enable' will enable spanning tree protocol on the switch. Setting this object to 'disable' will disable spanning tree protocol on the switch. Select the spanning tree protocol version using the object 'atiStkSwSysSpanningTreeVersion'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

atiStkSwSysSpanningTreeVersion 1.3.6.1.4.1.207.8.17.1.1.10
The object can be used to select the version of spanning tree protocol running on the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rstp(1), stp(2), mstp(3)  

atiStkSwSysAction 1.3.6.1.4.1.207.8.17.1.1.11
This object specifies the following actions that apply to the switch: saveConfig - Save the current switch configuration. reset - Reboot the switch. defaultConfig - Restore default switch configuration. The switch is automatically rebooted after this operation. Note that this object returns a zero value when doing a Get operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER saveConfig(1), reset(2), defaultConfig(3)  

atiStkSwSysNumOfModuleInStack 1.3.6.1.4.1.207.8.17.1.1.12
This object specifies the number of stacking modules in the stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwSysTrapRecv1 1.3.6.1.4.1.207.8.17.1.2.1
This object specifies the IP address of the management station #1 to which traps are sent by the switch. This MIB is not applicable to the 85xx and 94xx family of ATI switches.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwSysTrapRecv2 1.3.6.1.4.1.207.8.17.1.2.2
This object specifies the IP address of the management station #2 to which traps are sent by the switch. This MIB is not applicable to the 85xx and 94xx family of ATI switches.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwSysTrapRecv3 1.3.6.1.4.1.207.8.17.1.2.3
This object specifies the IP address of the management station #3 to which traps are sent by the switch. This MIB is not applicable to the 85xx and 94xx family of ATI switches.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwSysTrapRecv4 1.3.6.1.4.1.207.8.17.1.2.4
This object specifies the IP address of the management station #4 to which traps are sent by the switch. This MIB is not applicable to the 85xx and 94xx family of ATI switches.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwSysCurrentTime 1.3.6.1.4.1.207.8.17.1.5.1
This object specify the current time of the system. The user can change the time by providing the string format as an input, e.g. HH:MM:SS.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwSysCurrentDate 1.3.6.1.4.1.207.8.17.1.5.2
This object specify the current time of the system. The user can change the date by providing the string format as an input, e.g. DD-MM-YYYY.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwSysSNTPStatus 1.3.6.1.4.1.207.8.17.1.5.3
Enable/disable the SNTP status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

atiStkSwSysSNTPServerIPAddress 1.3.6.1.4.1.207.8.17.1.5.4
The ipaddress of the SNTP Server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwSysSNTPUTCOffset 1.3.6.1.4.1.207.8.17.1.5.5
Set the UTC Offset value within the range from -12 to 12 in hours.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -12..12  

atiStkSwSysSNTPDSTStatus 1.3.6.1.4.1.207.8.17.1.5.6
Enable/disble the Daylight Saving Time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

atiStkSwSysSNTPPollingInterval 1.3.6.1.4.1.207.8.17.1.5.7
Setting the interval for polling the SNTP Server. The polling time range is between 60 and 1200 in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 60..1200  

atiStkSwSysSNTPLastDelta 1.3.6.1.4.1.207.8.17.1.5.8
Display the last adjustment to system done in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwTemperatureInfoTable 1.3.6.1.4.1.207.8.17.1.6.1
This table contains a list of system temperature information present in the switch stack including voltage and temperature.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwTemperatureInfoEntry

atiStkSwTemperatureInfoEntry 1.3.6.1.4.1.207.8.17.1.6.1.1
This object specifies an entry in 'atiStkSwTemperatureInfoTable' that describes the hardware informaton for a module present in the switch stack.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwTemperatureInfoEntry  

atiStkSwTemperatureInfoModuleId 1.3.6.1.4.1.207.8.17.1.6.1.1.1
The module Id of a switch, it also used as an index of the table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwTemperatureInfoTemperature 1.3.6.1.4.1.207.8.17.1.6.1.1.2
The temperature of the device in Celcius.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

atiStkSwTemperatureInfoState 1.3.6.1.4.1.207.8.17.1.6.1.1.3
The state of the temperature state, either normal or off.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..12)  

atiStkSwFanInfoTable 1.3.6.1.4.1.207.8.17.1.6.2
This table contains information for all the fans present in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwFanInfoEntry

atiStkSwFanInfoEntry 1.3.6.1.4.1.207.8.17.1.6.2.1
This object specifies an entry in 'atiStkSwFanInfoTable' that describes the informaton for a specific fan in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwFanInfoEntry  

atiStkSwFanInfoModuleId 1.3.6.1.4.1.207.8.17.1.6.2.1.1
The module Id of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwFanInfoFan1Id 1.3.6.1.4.1.207.8.17.1.6.2.1.2
The fan Id1 of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwFan1InfoState 1.3.6.1.4.1.207.8.17.1.6.2.1.3
The state of the fan1 running, either normal or off.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..12)  

atiStkSwFan1InfoSpeed 1.3.6.1.4.1.207.8.17.1.6.2.1.4
The current speed of fan1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..10000  

atiStkSwFanInfoFan2Id 1.3.6.1.4.1.207.8.17.1.6.2.1.5
The fan2 Id of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwFan2InfoState 1.3.6.1.4.1.207.8.17.1.6.2.1.6
The state of the fan2 running, either normal or off.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..12)  

atiStkSwFan2InfoSpeed 1.3.6.1.4.1.207.8.17.1.6.2.1.7
The current speed of fan2.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..10000  

atiStkSwPSUInfoTable 1.3.6.1.4.1.207.8.17.1.6.4
This table contains information for all the power supply units present in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwPSUInfoEntry

atiStkSwPSUInfoEntry 1.3.6.1.4.1.207.8.17.1.6.4.1
This object specifies an entry in 'atiStkSwPSUInfoTable' that describes the informaton for a specific PSU in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwPSUInfoEntry  

atiStkSwPSUInfoModuleId 1.3.6.1.4.1.207.8.17.1.6.4.1.1
The module Id of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwPSUInfoPSU1Id 1.3.6.1.4.1.207.8.17.1.6.4.1.2
The PSU1 Id of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwPSU1InfoState 1.3.6.1.4.1.207.8.17.1.6.4.1.3
The state of the PSU1, either normal or off.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..12)  

atiStkSwPSU1InfoStatus 1.3.6.1.4.1.207.8.17.1.6.4.1.4
The status of the PSU1, either on or off.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..12)  

atiStkSwPSUInfoPSU2Id 1.3.6.1.4.1.207.8.17.1.6.4.1.5
The PSU2 Id of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwPSU2InfoState 1.3.6.1.4.1.207.8.17.1.6.4.1.6
The state of the PSU2, either normal or off.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..12)  

atiStkSwPSU2InfoStatus 1.3.6.1.4.1.207.8.17.1.6.4.1.7
The status of the PSU2, either on or off.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..12)  

atiStkSwSysMgmtACLStatus 1.3.6.1.4.1.207.8.17.1.7.1
Enable/Disable management ACL feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwSysMgmtACLConfigTable 1.3.6.1.4.1.207.8.17.1.7.2
This table contains a list of MgmtACLs present in the switch stack and their associated hardware information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwSysMgmtACLConfigEntry

atiStkSwSysMgmtACLConfigEntry 1.3.6.1.4.1.207.8.17.1.7.2.1
This object specifies an entry in 'atiStkSwSysMgmtACLConfigTable' that allow the user controls which management stations can remotely manage the device using the Telnet application protocol or a web browser.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwSysMgmtACLConfigEntry  

atiStkSwSysMgmtACLConfigModuleId 1.3.6.1.4.1.207.8.17.1.7.2.1.1
The ID of this module.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwSysMgmtACLConfigId 1.3.6.1.4.1.207.8.17.1.7.2.1.2
The ID of the Management ACL Table for this module.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..256  

atiStkSwSysMgmtACLConfigIpAddr 1.3.6.1.4.1.207.8.17.1.7.2.1.3
The IP Address of the specific management station.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwSysMgmtACLConfigMask 1.3.6.1.4.1.207.8.17.1.7.2.1.4
The subnet mask of the IP Address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwSysMgmtACLConfigApplication 1.3.6.1.4.1.207.8.17.1.7.2.1.5
This object specify which interface the user want the management station to be able to use when managing the switch. The options are : telnet, web, ping, all. Note that the enum value correspond to the bit position of the mask.
Status: current Access: read-write
OBJECT-TYPE    
  BITS telnet(0), web(1), ping(2)  

atiStkSwSysMgmtACLConfigRowStatus 1.3.6.1.4.1.207.8.17.1.7.2.1.6
The Row Status of the Mgmt ACL table.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

atiStkSwPortMirroringConfig 1.3.6.1.4.1.207.8.17.2.2
OBJECT IDENTIFIER    

atiStkSwPortConfigTable 1.3.6.1.4.1.207.8.17.2.1
This table contains a list of physical ports present in the switch and their associated attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwPortConfigEntry

atiStkSwPortConfigEntry 1.3.6.1.4.1.207.8.17.2.1.1
This object specifies an entry in 'atiStkSwPortConfigTable' that describes the attributes associated with a physical port present in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwPortConfigEntry  

atiStkSwModuleId 1.3.6.1.4.1.207.8.17.2.1.1.1
This object specifies the ID of a module present in the switch stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwPortId 1.3.6.1.4.1.207.8.17.2.1.1.2
This object specifies the ID of a port present on a given module.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

atiStkSwPortName 1.3.6.1.4.1.207.8.17.2.1.1.3
The user-defined ASCII name of the port.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

atiStkSwPortState 1.3.6.1.4.1.207.8.17.2.1.1.4
This object allows the user to either enabled or disabled. This object can be read to obtain the current state of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwPortLinkState 1.3.6.1.4.1.207.8.17.2.1.1.5
This object specifies the link state on this port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

atiStkSwPortNegotiation 1.3.6.1.4.1.207.8.17.2.1.1.6
This object allows an admin request to configure the port to either autosense or one of the different speed-duplex combinations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autosense(1), forceHalfDuplex-10M(2), forceHalfDuplex-100M(3), forceHalfDuplex-1G(4), forceFullDuplex-10M(5), forceFullDuplex-100M(6), forceFullDuplex-1G(7)  

atiStkSwPortSpeed 1.3.6.1.4.1.207.8.17.2.1.1.7
This object specifies the current speed of the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), speed-10M(2), speed-100M(3), speed-1G(4)  

atiStkSwPortDuplexStatus 1.3.6.1.4.1.207.8.17.2.1.1.8
This object specifies the current duplex type used by the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), halfDuplex(2), fullDuplex(3)  

atiStkSwPortFlowControl 1.3.6.1.4.1.207.8.17.2.1.1.9
This object is used to enable/disable flow control on the port. When enabled, flow control will be full duplex. Flow control is disabled by default.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

atiStkSwPortBackPressure 1.3.6.1.4.1.207.8.17.2.1.1.10
This object is used to enable/disable Back Pressure on the port. Back Pressure is disabled by default.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

atiStkSwPortPriority 1.3.6.1.4.1.207.8.17.2.1.1.11
This object specifies whether packets flowing through this port use the associated VLAN priority or override the associated VLAN priority with either a high or a low priority. This MIB is not applicable to the 85xx and 94xx family of ATI switches. Note: These switch families support CoS/QoS.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER use-vlan-priority(1), override-and-use-low-priority(2), override-and-use-high-priority(3)  

atiStkSwPortBroadcastProcessing 1.3.6.1.4.1.207.8.17.2.1.1.12
This object specifies whether the received broadcast packets should be processed or discarded. Broadcast packets are processed by default.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER discard-broadcasts(1), do-not-discard-broadcasts(2)  

atiStkSwPortMDIO 1.3.6.1.4.1.207.8.17.2.1.1.13
This object is used to set the MDIO of this port for required cable connection type. For straight-through cable set to mdi and for cross-over cable set to mdix.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mdi(1), mdix(2), auto-mdix(3)  

atiStkSwPortHOLLimit 1.3.6.1.4.1.207.8.17.2.1.1.14
This object allows user to set the head of line blocking limit. Note (94xx): Range upto 8191 is supported for Gigabit Ports.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8191  

atiStkSwPortBackPressureLimit 1.3.6.1.4.1.207.8.17.2.1.1.15
This object is used to set the MDIO of this port for required cable connection type. For straight-through cable set to mdi and for cross-over cable set to mdix. This limit can be used for both BackPressure and FlowControl Limits. Note: The range of 1 to 7935 is supported on the 94xx family.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..7935  

atiStkSwPortSTPState 1.3.6.1.4.1.207.8.17.2.1.1.16
This object specifies the spanning tree state on this port. This object is not applicable to 8300 series products. This object is not valid on the 9400 series of boxes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), disabled(2), blocking(3), listening(4), learning(5), forwarding(6)  

atiStkSwPortMirroringState 1.3.6.1.4.1.207.8.17.2.2.1
This object specifies whether port mirroring is l2-enabled, or disabled on the switch. Note that, when enabled, both transmit and receive packets will be mirrored.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

atiStkSwPortMirroringDestinationModuleId 1.3.6.1.4.1.207.8.17.2.2.4
This object specifies the module ID of the destination port that mirrors the source port (specified by 'atiStkSwPortMirroringSourceModuleId' and 'atiStkSwPortMirroringSourcePortId'). All packets transmitted and received on the source port will be mirrored onto the destination port. This object will have a value of 0 when port mirroring is disabled. This object will have a default value of 1 (the master module ID) when mirroring is enabled. This is not available on the 85xx and 94xx series of switches
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwPortMirroringDestinationPortId 1.3.6.1.4.1.207.8.17.2.2.5
This object specifies the port ID (on the module specified by 'atiStkSwPortMirroringDestinationModuleId') of the destination port that mirrors the source port (specified by 'atiStkSwPortMirroringSourceModuleId' and 'atiStkSwPortMirroringSourcePortId'). All packets transmitted and received on the source port will be mirrored onto the destination port. This object will have a value of 0 when port mirroring is disabled. When mirroring is enabled, set this object to a non-zero value to activate mirroring.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiStkSwPortMirroringSourceRxList 1.3.6.1.4.1.207.8.17.2.2.6
This object specifies a list of ports that are mirrored for ingress traffic. All packets received on these ports will be mirrored onto the mirror port (atiStkSwPortMirroringDestinationPortId). It is in the format of a list of separated by comma. For example, '1, 4-7' represents the port number 1 ports from number 4 to 7. This object is not applicable to 8300 series products.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwPortMirroringSourceTxList 1.3.6.1.4.1.207.8.17.2.2.7
This object specifies a list of ports that are mirrored for egress traffic. All packets transmitted from these ports will be mirrored onto the mirror port (atiStkSwPortMirroringDestinationPortId). It is in the format of a list of separated by comma. For example, '1, 4-7' represents the port number 1 ports from number 4 to 7. This object is not applicable to 8300 series products.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkPortSecurityConfigTable 1.3.6.1.4.1.207.8.17.2.5
This table contains the port security attributes of a list of physical ports present in the switch. This table object is not applicable to 8300 series products.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkPortSecurityConfigEntry

atiStkPortSecurityConfigEntry 1.3.6.1.4.1.207.8.17.2.5.1
This object specifies an entry in 'atiStkPortSecurityConfigTable' that describes the port security attributes associated with a physical port present in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkPortSecurityConfigEntry  

atiStkPortSecurityThreshold 1.3.6.1.4.1.207.8.17.2.5.1.2
This object specifies the security threshold on this port. It is applicable only if the port security mode (specified by 'portSecurityMode') is set to 'limited(2)' mode.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..256  

atiStkPortIntrusionAction 1.3.6.1.4.1.207.8.17.2.5.1.3
This object specifies the security action that should be taken when an intrusion is detected. By default, port intrusion action is set to 'discard' mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER protect(1), restrict(2), shutdown(3)  

atiStkPortSecurityAging 1.3.6.1.4.1.207.8.17.2.5.1.4
This object enables or disables the security aging by the 'portSecurityAging'. By default, port intrusion action is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

atiStkPortIntrusionActionStatus 1.3.6.1.4.1.207.8.17.2.5.1.5
This object enables or disables the security action specified by the 'portIntrusionAction'. By default, port intrusion action is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkPortDhcpIpConfigTable 1.3.6.1.4.1.207.8.17.2.6
This table contains the port DHCP IP assignments list of physical ports present in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkPortDhcpIpConfigEntry

atiStkPortDhcpIpConfigEntry 1.3.6.1.4.1.207.8.17.2.6.1
This object specifies an entry in 'atiStkPortDhcpIpConfigTable' that describes the port DHCP IP assignments associated with a physical port present in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkPortDhcpIpConfigEntry  

atiStkPortDhcpIpOffer 1.3.6.1.4.1.207.8.17.2.6.1.1
This object specifies the DHCP IP Offer on this port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkPortDhcpIpAdd 1.3.6.1.4.1.207.8.17.2.6.1.2
This object specifies the DHCP IP added on this port.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkPortDhcpIpDelete 1.3.6.1.4.1.207.8.17.2.6.1.3
This object specifies the DHCP IP deleted on this port.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwIntrusionAttackTable 1.3.6.1.4.1.207.8.17.2.7
This object specifies an entry in 'atiStkSwIntrusionAttackTable' that describes the intruder attack associated with a physical port present in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwIntrusionAttackEntry

atiStkSwIntrusionAttackEntry 1.3.6.1.4.1.207.8.17.2.7.1
This object specifies an entry in 'atiStkSwIntrusionAttackTable' that describes the intruder attack associated with a physical port present in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwIntrusionAttackEntry  

atiStkSwIntruderAttackVlanId 1.3.6.1.4.1.207.8.17.2.7.1.1
This object identifies the intruding VlanId on the port for this module.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwIntruderAttackMacAddr 1.3.6.1.4.1.207.8.17.2.7.1.2
This object identifies the intruding MAC address on the port for this module.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiStkSwPortLoopProtectConfigTable 1.3.6.1.4.1.207.8.17.2.8
This table contains the current loop detection information of a list of physical ports present in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwPortLoopProtectConfigEntry

atiStkSwPortLoopProtectConfigEntry 1.3.6.1.4.1.207.8.17.2.8.1
This object specifies an entry in 'atiStkSwPortLoopProtectConfigTable' that describe the current Loop Detection information with a physical port present in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwPortLoopProtectConfigEntry  

atiStkSwPortLoopProtectConfigStatus 1.3.6.1.4.1.207.8.17.2.8.1.1
This object specifies the current loop status of Loop Protection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), normal(2), detected(3), blocking(4)  

atiStkSwPortLoopProtectConfigAction 1.3.6.1.4.1.207.8.17.2.8.1.2
This object specifies the current loop action by Loop Detected.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), learn-disable(2), link-down(3), log-only(4), port-disabled(5), vlan-disable(6), none(7)  

atiStkSwPortLoopProtectConfigExpiry 1.3.6.1.4.1.207.8.17.2.8.1.3
This object specifies the remaining time(sec) to back to normal status from blocking status. A value of -1 indicates that Blocktimeout has been set 'None' or Loop Protection is 'Normal' status.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwRxLDFModuleId 1.3.6.1.4.1.207.8.17.2.8.1.4
The Module ID where the loop detection frame is received on.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwRxLDFPortId 1.3.6.1.4.1.207.8.17.2.8.1.5
The Port ID where the loop detection frame is received on.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwRxLDFVlanId 1.3.6.1.4.1.207.8.17.2.8.1.6
The Vlan ID where the loop detection frame is received on.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwVlanConfigTable 1.3.6.1.4.1.207.8.17.3.1
This table contains a list of VLANs configured on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwVlanConfigEntry

atiStkSwVlanConfigEntry 1.3.6.1.4.1.207.8.17.3.1.1
This object specifies an entry in 'atiStkSwVlanConfigTable' that describes a VLAN configured on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwVlanConfigEntry  

atiStkSwVlanId 1.3.6.1.4.1.207.8.17.3.1.1.1
The VLAN ID of this VLAN as stored in the tag information header in accordance with the 802.1q specifications.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiStkSwVlanName 1.3.6.1.4.1.207.8.17.3.1.1.2
The name of the VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

ipAddress 1.3.6.1.4.1.207.8.17.3.1.1.3
The ip address of the VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwVlanVlanType 1.3.6.1.4.1.207.8.17.3.1.1.4
This object specifies the type of the Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(0), port-based(1), mac-based(2), dynamic(3), protected(4)  

atiStkSwVlanTaggedPortList 1.3.6.1.4.1.207.8.17.3.1.1.5
This object specifies a list of tagged ports (on module #1) that participate in this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwVlanUntaggedPortList 1.3.6.1.4.1.207.8.17.3.1.1.6
This object specifies a list of untagged ports (on module #1) that participate in this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwVlanConfigEntryStatus 1.3.6.1.4.1.207.8.17.3.1.1.7
The current status of this VLAN entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nonexistent(0), active(1), inactive(2), destroy(3), createAndGo(4), createAndWait(5)  

atiStkSwPort2VlanTable 1.3.6.1.4.1.207.8.17.3.2
This tables contains a list of ports in the switch and their associated VLAN configuration information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwPort2VlanEntry

atiStkSwPort2VlanEntry 1.3.6.1.4.1.207.8.17.3.2.1
This object specifies an entry in 'atiStkSwPort2VlanTable' that describes the VLAN information associated with a given module/port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwPort2VlanEntry  

atiStkSwPortIndex 1.3.6.1.4.1.207.8.17.3.2.1.1
The Index of the VLAN to which this port belongs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwPortPortId 1.3.6.1.4.1.207.8.17.3.2.1.2
The ID of the VLAN to which this port belongs.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwPortVlanId 1.3.6.1.4.1.207.8.17.3.2.1.3
The ID of the VLAN to which this port belongs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwPortVlanName 1.3.6.1.4.1.207.8.17.3.2.1.4
The name of the VLAN to which this port belongs.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..19)  

atiStkSwMacAddr2VlanTable 1.3.6.1.4.1.207.8.17.3.3
This table contains a list of MAC addresses (in the forwarding table of the switch) and the associated VLAN to which each MAC address belongs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwMacAddr2VlanEntry

atiStkSwMacAddr2VlanEntry 1.3.6.1.4.1.207.8.17.3.3.1
This object specifies an entry in 'atiStkSwMacAddr2VlanTable' that associates a MAC address (in the forwarding table of the switch) with the VLAN to which the address belongs.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwMacAddr2VlanEntry  

atiStkSwMacEntry 1.3.6.1.4.1.207.8.17.3.3.1.1
All entries present in the table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwMacAddress 1.3.6.1.4.1.207.8.17.3.3.1.2
A MAC address from the forwarding table of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiStkSwMacAddrVlanId 1.3.6.1.4.1.207.8.17.3.3.1.3
The ID of the VLAN to which this MAC address belongs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiStkSwMacAddrVlanName 1.3.6.1.4.1.207.8.17.3.3.1.4
The name of the VLAN to which this MAC address belongs.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..19)  

atiStkSwMacAddrPortList 1.3.6.1.4.1.207.8.17.3.3.1.7
The port List (on the module specified by 'atiStkSwMacAddrModuleId') on which this MAC address entry exists. This is shown as U: Untagged Ports T: Tagged Ports.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiStkSwGVRPConfig 1.3.6.1.4.1.207.8.17.3.6
OBJECT IDENTIFIER    

atiStkSwGVRPStatus 1.3.6.1.4.1.207.8.17.3.6.1
Enabled/Disabled GVRP on a switch basis.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(0)  

atiStkSwGVRPGIPStatus 1.3.6.1.4.1.207.8.17.3.6.2
Enabled/Disabled GARP Information Propagation (GIP) on a switch basis.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(0)  

atiStkSwGVRPJoinTimer 1.3.6.1.4.1.207.8.17.3.6.3
Specifies the Join Timer in centi seconds, (1/100th of seconds), The default is 20 centi seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..60  

atiStkSwGVRPLeaveTimer 1.3.6.1.4.1.207.8.17.3.6.4
Specifies the Leave Timer in centi seconds, (1/100th of seconds), The default is 60 centi seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..180  

atiStkSwGVRPLeaveAllTimer 1.3.6.1.4.1.207.8.17.3.6.5
Specifies the Leave All Timer in centi seconds, (1/100th of seconds), The default is 1000 centi seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 500..3000  

atiStkSwGVRPPortConfigTable 1.3.6.1.4.1.207.8.17.3.7
This table is configuring the GVRP Vlan base on each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwGVRPPortConfigEntry

atiStkSwGVRPPortConfigEntry 1.3.6.1.4.1.207.8.17.3.7.1
This object specifies an entry in 'atiStkSwGVRPPortConfigTable'.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwGVRPPortConfigEntry  

atiStkSwGVRPPortConfigModuleId 1.3.6.1.4.1.207.8.17.3.7.1.1
An ID that indicate which module it refer to for stacking.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwGVRPPortConfigPortId 1.3.6.1.4.1.207.8.17.3.7.1.2
Port Index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

atiStkSwGVRPPortConfigStatus 1.3.6.1.4.1.207.8.17.3.7.1.3
Port Status for GVRP Vlan either Normal or Mode can be set.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), normal(0)  

atiStkSwGVRPCountersTable 1.3.6.1.4.1.207.8.17.3.8
This table is configuring the GVRP Vlan base on each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwGVRPCountersEntry

atiStkSwGVRPCountersEntry 1.3.6.1.4.1.207.8.17.3.8.1
This object specifies an entry in 'atiStkSwGVRPCountersTable'.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwGVRPCountersEntry  

atiStkSwGVRPCountersModuleId 1.3.6.1.4.1.207.8.17.3.8.1.1
An ID that indicate which module it refer to for stacking.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwGVRPCountersGARPRxPkt 1.3.6.1.4.1.207.8.17.3.8.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersInvalidGARPRxPkt 1.3.6.1.4.1.207.8.17.3.8.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersGARPTxPkt 1.3.6.1.4.1.207.8.17.3.8.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersGARPTxDisabled 1.3.6.1.4.1.207.8.17.3.8.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersPortNotSending 1.3.6.1.4.1.207.8.17.3.8.1.6
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersGARPDisabled 1.3.6.1.4.1.207.8.17.3.8.1.7
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersPortNotListening 1.3.6.1.4.1.207.8.17.3.8.1.8
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersInvalidPort 1.3.6.1.4.1.207.8.17.3.8.1.9
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersInvalidProtocol 1.3.6.1.4.1.207.8.17.3.8.1.10
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersInvalidFormat 1.3.6.1.4.1.207.8.17.3.8.1.11
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersDatabaseFull 1.3.6.1.4.1.207.8.17.3.8.1.12
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersRxMsgLeaveAll 1.3.6.1.4.1.207.8.17.3.8.1.13
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersRxMsgJoinEmpty 1.3.6.1.4.1.207.8.17.3.8.1.14
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersRxMsgJoinIn 1.3.6.1.4.1.207.8.17.3.8.1.15
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersRxMsgLeaveEmpty 1.3.6.1.4.1.207.8.17.3.8.1.16
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersRxMsgLeaveIn 1.3.6.1.4.1.207.8.17.3.8.1.17
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersRxMsgEmpty 1.3.6.1.4.1.207.8.17.3.8.1.18
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersRxMsgBadMsg 1.3.6.1.4.1.207.8.17.3.8.1.19
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersRxMsgBadAttribute 1.3.6.1.4.1.207.8.17.3.8.1.20
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersTxMsgLeaveAll 1.3.6.1.4.1.207.8.17.3.8.1.21
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersTxMsgJoinEmpty 1.3.6.1.4.1.207.8.17.3.8.1.22
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersTxMsgJoinIn 1.3.6.1.4.1.207.8.17.3.8.1.23
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersTxMsgLeaveEmpty 1.3.6.1.4.1.207.8.17.3.8.1.24
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersTxMsgLeaveIn 1.3.6.1.4.1.207.8.17.3.8.1.25
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwGVRPCountersTxMsgEmpty 1.3.6.1.4.1.207.8.17.3.8.1.26
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwStaticMacAddrTable 1.3.6.1.4.1.207.8.17.4.1
This table contains a list of static MAC address configured on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwStaticMacAddrEntry

atiStkSwStaticMacAddrEntry 1.3.6.1.4.1.207.8.17.4.1.1
This object is an entry in 'atiStkSwStaticMacAddrTable' that describes a static MAC address configured on a given module and port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwStaticMacAddrEntry  

atiStkSwStaticEntry 1.3.6.1.4.1.207.8.17.4.1.1.1
The Table Entry number in static MAC address entry table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwStaticMacAddress 1.3.6.1.4.1.207.8.17.4.1.1.2
This object identifies the static MAC address of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiStkSwStaticMacAddrVlanId 1.3.6.1.4.1.207.8.17.4.1.1.3
The ID of the VLAN on which this static MAC address entry is configured.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiStkSwStaticMacAddrModuleId 1.3.6.1.4.1.207.8.17.4.1.1.4
The module ID on which this static MAC address entry is configured.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwStaticMacAddrPortId 1.3.6.1.4.1.207.8.17.4.1.1.5
The port ID (on the module specified by 'atiStkSwStaticMacAddrModuleId') on which this static MAC address entry is configured. Note: a) When defining a list this value must be 0. b) This is on track to be deprecated approx. Dec'2004.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiStkSwStaticMacAddrDstMacState 1.3.6.1.4.1.207.8.17.4.1.1.6
The current status of this static MAC address entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER discard(0), forward(1)  

atiStkSwStaticMacAddrEntryStatus 1.3.6.1.4.1.207.8.17.4.1.1.7
The current status of this static MAC address entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(0), dynamic(1)  

atiStkSwEthModuleMonTable 1.3.6.1.4.1.207.8.17.5.1
This table contains a list of modules and their associated ethernet statistics (measured on the module as a whole).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwEthModuleMonEntry

atiStkSwEthModuleMonEntry 1.3.6.1.4.1.207.8.17.5.1.1
This object specifies an entry in 'atiStkSwEthModuleMonTable' that describes the ethernet statistics measured on a given module as a whole.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwEthModuleMonEntry  

atiStkSwEthModuleMonId 1.3.6.1.4.1.207.8.17.5.1.1.1
Index into atiStkSwEthModuleMonTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwEthModuleMonTxGoodFrames 1.3.6.1.4.1.207.8.17.5.1.1.2
The total number of good frames transmitted by this module.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthModuleMonRxGoodFrames 1.3.6.1.4.1.207.8.17.5.1.1.3
The total number of good frames received by this module.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthModuleMonTxTotalBytes 1.3.6.1.4.1.207.8.17.5.1.1.4
The total number of bytes transmitted by this module.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthModuleMonTxBroadcastFrames 1.3.6.1.4.1.207.8.17.5.1.1.5
The total number of broadcast frames transmitted from this module.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthModuleMonTxMulticastFrames 1.3.6.1.4.1.207.8.17.5.1.1.6
The total number of multicast frames transmitted from this module.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthModuleMonRxOverrunFrames 1.3.6.1.4.1.207.8.17.5.1.1.7
The total number of oversized frames received on this module.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthModuleErrTable 1.3.6.1.4.1.207.8.17.5.2
This table contains a list of modules and their associated ethernet error statistics (measured on the module as a whole).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwEthModuleErrEntry

atiStkSwEthModuleErrEntry 1.3.6.1.4.1.207.8.17.5.2.1
This object specifies an entry in 'atiStkSwEthModuleErrTable' that describes the ethernet error statistics measured on a given module as a whole.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwEthModuleErrEntry  

atiStkSwEthModuleErrId 1.3.6.1.4.1.207.8.17.5.2.1.1
Index into atiStkSwEthModuleErrTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwEthModuleErrRxCRC 1.3.6.1.4.1.207.8.17.5.2.1.2
The total number of CRC errors on packets received on this module.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthModuleErrRxBadFrames 1.3.6.1.4.1.207.8.17.5.2.1.3
The total number of bad frames received on this module.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthModuleErrCollisions 1.3.6.1.4.1.207.8.17.5.2.1.4
The number of times a collision was detected on this module.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthPortMonTable 1.3.6.1.4.1.207.8.17.5.3
This table contains a list of ports and their associated ethernet statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwEthPortMonEntry

atiStkSwEthPortMonEntry 1.3.6.1.4.1.207.8.17.5.3.1
This object specifies an entry in 'atiStkSwEthPortMonTable' that describes the ethernet statistics measured on a given module/port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwEthPortMonEntry  

atiStkSwEthPortMonId 1.3.6.1.4.1.207.8.17.5.3.1.1
Index into atiStkSwEthPortMonTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwEthPortMonTxGoodFrames 1.3.6.1.4.1.207.8.17.5.3.1.2
The total number of good frames transmitted by this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthPortMonRxGoodFrames 1.3.6.1.4.1.207.8.17.5.3.1.3
The total number of good frames received by this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthPortMonTxTotalBytes 1.3.6.1.4.1.207.8.17.5.3.1.4
The total number of bytes transmitted by this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthPortMonTxBroadcastFrames 1.3.6.1.4.1.207.8.17.5.3.1.5
The total number of broadcast frames transmitted from this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthPortMonTxMulticastFrames 1.3.6.1.4.1.207.8.17.5.3.1.6
The total number of broadcast frames transmitted from this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthPortMonRxOverrunFrames 1.3.6.1.4.1.207.8.17.5.3.1.7
The total number of oversized frames received on this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthPortErrTable 1.3.6.1.4.1.207.8.17.5.4
This table contains a list of ports and their associated ethernet error statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwEthPortErrEntry

atiStkSwEthPortErrEntry 1.3.6.1.4.1.207.8.17.5.4.1
This object specifies an entry in atiStkSwEthPortErrTable that describes the ethernet error statistics measured on a given module/port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwEthPortErrEntry  

atiStkSwEthPortErrId 1.3.6.1.4.1.207.8.17.5.4.1.1
Index into atiStkSwEthPortMonTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwEthPortErrRxBadFrames 1.3.6.1.4.1.207.8.17.5.4.1.2
The total number of bad frames received on this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwEthPortErrCollisions 1.3.6.1.4.1.207.8.17.5.4.1.3
The number of times a collision was detected on this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

atiStkSwTrapsInfo 1.3.6.1.4.1.207.8.17.6.0
OBJECT IDENTIFIER    

atiStkSwIntrusionDetectionTrap 1.3.6.1.4.1.207.8.17.6.0.1
This trap is sent out when an intrusion is detected on a port in the switch and the port security has been configured to send traps. It includes the mac address and vlan.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwSTPPortStateChangeTrap 1.3.6.1.4.1.207.8.17.6.0.2
This trap is sent out when STP port state changes due to RSTP/MSTP topology changes in the switch. This trap is not applicable to 8300 series products.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwBPDUGuardIsTriggeredTrap 1.3.6.1.4.1.207.8.17.6.0.3
This trap is sent out when a BPDU guard detects a spoofed BPDU entering the STP system thru the edge port. The BPDU guard will disable the port and notify the system administrator.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwPOEPowerExceedThresholdTrap 1.3.6.1.4.1.207.8.17.6.0.4
This trap is sent out when there is a port power exceeding the threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwPOEPowerNormalTrap 1.3.6.1.4.1.207.8.17.6.0.5
This trap is sent out when there is a port power under threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwFanStopSpinTrap 1.3.6.1.4.1.207.8.17.6.0.6
This trap is sent out when an error in the fan operation is detected in a module.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwFanStopSpinRecoveryTrap 1.3.6.1.4.1.207.8.17.6.0.7
This trap is sent out when a fan become running Ok.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwTemperatureHighTrap 1.3.6.1.4.1.207.8.17.6.0.8
This trap is sent out when the temperature of a module becomes too high.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

atiStkSwTemperatureLowTrap 1.3.6.1.4.1.207.8.17.6.0.9
This trap is sent out when the temperature of a module becomes too low.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

atiStkSwTemperatureLimitClearTrap 1.3.6.1.4.1.207.8.17.6.0.10
This trap is sent out when it is generated when system temperature become normal.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwVolt5VLimitTrap 1.3.6.1.4.1.207.8.17.6.0.11
This trap is sent out when there is a port 5v power exceeds limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwVolt5VLimitClearTrap 1.3.6.1.4.1.207.8.17.6.0.12
This trap is sent out when there is a port 5v power returns normal.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwVoltVCCLimitTrap 1.3.6.1.4.1.207.8.17.6.0.13
This trap is sent out when there is a port VCC power exceeds limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwVoltVCCLimitClearTrap 1.3.6.1.4.1.207.8.17.6.0.14
This trap is sent out when there is a port VCC power returns normal.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwVoltVCCPLimitTrap 1.3.6.1.4.1.207.8.17.6.0.15
This trap is sent out when there is a port VCCP power exceeds limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwVoltVCCPLimitClearTrap 1.3.6.1.4.1.207.8.17.6.0.16
This trap is sent out when there is a port VCCP power returns normal.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwVolt2HalfVLimitTrap 1.3.6.1.4.1.207.8.17.6.0.17
This trap is sent out when there is a port 2.5v power exceeds limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwVolt2HalfVLimitClearTrap 1.3.6.1.4.1.207.8.17.6.0.18
This trap is sent out when there is a port 2.5v power returns normal.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwVolt12VLimitTrap 1.3.6.1.4.1.207.8.17.6.0.19
This trap is sent out when there is a port 12v power exceeds limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwVolt12VLimitClearTrap 1.3.6.1.4.1.207.8.17.6.0.20
This trap is sent out when there is a port 12v power returns normal.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwPOEErrorStateTrap 1.3.6.1.4.1.207.8.17.6.0.21
This trap is sent out when there is a POE port abnormal.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwPOEPortResetTrap 1.3.6.1.4.1.207.8.17.6.0.22
This trap is sent out when there is a POE port reset.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwSysRPSStateChangedTrap 1.3.6.1.4.1.207.8.17.6.0.23
This trap is sent out when the RPS(redundant Power Supply) changes state in the switch. This trap is not applicable to 8300 series products.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwBPDUGuardFilterTriggeredTrap 1.3.6.1.4.1.207.8.17.6.0.24
This trap is sent out when a BPDU filter detects a spoofed BPDU entering the STP system thru the edge port. The BPDU filter will block the port and notify the system administrator.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwLoopProtectDetectedLoopBlockedTrap 1.3.6.1.4.1.207.8.17.6.0.25
Generated when Loop Protection feature blocks a interface with a loop.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwLoopProtectRecoverLoopBlockedTrap 1.3.6.1.4.1.207.8.17.6.0.26
Generated when Loop Protection feature restores a blocked interface back to normal operation.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwLoopProtectDetectedByLDFTrap 1.3.6.1.4.1.207.8.17.6.0.27
Generated when Loop Protection feature detects a loop by Loop Detection method.
Status: current Access: read-only
NOTIFICATION-TYPE    

atiStkSwQosStatusTable 1.3.6.1.4.1.207.8.17.7.1
atiStkSwQosStatusTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwQosStatusEntry

atiStkSwQosStatusEntry 1.3.6.1.4.1.207.8.17.7.1.1
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwQosStatusEntry  

atiStkSwQosStatusPortId 1.3.6.1.4.1.207.8.17.7.1.1.1
Index into atiStkSwQosStatusTable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwQosStatusStatus 1.3.6.1.4.1.207.8.17.7.1.1.2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

atiStkSwQosInterfaceDetailsTable 1.3.6.1.4.1.207.8.17.7.2
atiStkSwQosInterfaceDetailsTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwQosInterfaceDetailsEntry

atiStkSwQosInterfaceDetailsEntry 1.3.6.1.4.1.207.8.17.7.2.1
atiStkSwQosInterfaceDetailsEntry
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwQosInterfaceDetailsEntry  

atiStkSwQosInterfaceDetailsPortId 1.3.6.1.4.1.207.8.17.7.2.1.1
Index into atiStkSwQosInterfaceDetailsPortId
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwQosInterfaceDetailsDefaultQueue 1.3.6.1.4.1.207.8.17.7.2.1.2
atiStkSwQosInterfaceDetailsDefaultQueue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiStkSwQosInterfaceDetailsTrust 1.3.6.1.4.1.207.8.17.7.2.1.3
atiStkSwQosInterfaceDetailsDefaultQueue
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), cos(1), dscp(2)  

atiStkSwQosInterfaceDetailsSetCOS 1.3.6.1.4.1.207.8.17.7.2.1.4
atiStkSwQosInterfaceDetailsMarkOrRemark
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..255)  

atiStkSwQosInterfaceDetailsSetDSCP 1.3.6.1.4.1.207.8.17.7.2.1.5
atiStkSwQosInterfaceDetailsMarkOrRemark
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..255)  

atiStkSwQosInterfaceDetailsSchedularAndQueueWeightList 1.3.6.1.4.1.207.8.17.7.2.1.6
atiStkSwQosInterfaceDetailsSchedularAndQueueWeightList
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..255)  

atiStkSwQosCosQueueMapTable 1.3.6.1.4.1.207.8.17.7.3
atiStkSwQosCosQueueMapTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwQosCosQueueMapEntry

atiStkSwQosCosQueueMapEntry 1.3.6.1.4.1.207.8.17.7.3.1
atiStkSwQosCosQueueMapEntry
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwQosCosQueueMapEntry  

atiStkSwQosCosQueueMapPortId 1.3.6.1.4.1.207.8.17.7.3.1.1
Index into atiStkSwQosCosQueueMapTable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwQosCosQueueMapCos0Queue 1.3.6.1.4.1.207.8.17.7.3.1.2
atiStkSwQosCosQueueMapCos0Queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiStkSwQosCosQueueMapCos1Queue 1.3.6.1.4.1.207.8.17.7.3.1.3
atiStkSwQosCosQueueMapCos1Queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiStkSwQosCosQueueMapCos2Queue 1.3.6.1.4.1.207.8.17.7.3.1.4
atiStkSwQosCosQueueMapCos2Queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiStkSwQosCosQueueMapCos3Queue 1.3.6.1.4.1.207.8.17.7.3.1.5
atiStkSwQosCosQueueMapCos3Queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiStkSwQosCosQueueMapCos4Queue 1.3.6.1.4.1.207.8.17.7.3.1.6
atiStkSwQosCosQueueMapCos4Queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiStkSwQosCosQueueMapCos5Queue 1.3.6.1.4.1.207.8.17.7.3.1.7
atiStkSwQosCosQueueMapCos5Queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiStkSwQosCosQueueMapCos6Queue 1.3.6.1.4.1.207.8.17.7.3.1.8
atiStkSwQosCosQueueMapCos6Queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiStkSwQosCosQueueMapCos7Queue 1.3.6.1.4.1.207.8.17.7.3.1.9
atiStkSwQosCosQueueMapCos7Queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiStkSwQosCosQueueMapDefaultMap 1.3.6.1.4.1.207.8.17.7.3.1.10
atiStkSwQosCosQueueMapDefaultQueue
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

atiStkSwQosDscpQueueMapTable 1.3.6.1.4.1.207.8.17.7.4
atiStkSwQosDscpQueueMapTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwQosDscpQueueMapEntry

atiStkSwQosDscpQueueMapEntry 1.3.6.1.4.1.207.8.17.7.4.1
atiStkSwQosDscpQueueMapEntry
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwQosDscpQueueMapEntry  

atiStkSwQosDscpQueueMapPortId 1.3.6.1.4.1.207.8.17.7.4.1.1
Index into atiStkSwQosDscpQueueMapTable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwQosDscpQueueMapQueue0 1.3.6.1.4.1.207.8.17.7.4.1.2
atiStkSwQosDscpQueueMapQueue0
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..255)  

atiStkSwQosDscpQueueMapQueue1 1.3.6.1.4.1.207.8.17.7.4.1.3
atiStkSwQosDscpQueueMapQueue1
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..255)  

atiStkSwQosDscpQueueMapQueue2 1.3.6.1.4.1.207.8.17.7.4.1.4
atiStkSwQosDscpQueueMapQueue2
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..255)  

atiStkSwQosDscpQueueMapQueue3 1.3.6.1.4.1.207.8.17.7.4.1.5
atiStkSwQosDscpQueueMapQueue3
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..255)  

atiStkSwQosDscpQueueMapQueue4 1.3.6.1.4.1.207.8.17.7.4.1.6
atiStkSwQosDscpQueueMapQueue4
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..255)  

atiStkSwQosDscpQueueMapQueue5 1.3.6.1.4.1.207.8.17.7.4.1.7
atiStkSwQosDscpQueueMapQueue5
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..255)  

atiStkSwQosDscpQueueMapQueue6 1.3.6.1.4.1.207.8.17.7.4.1.8
atiStkSwQosDscpQueueMapQueue6
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..255)  

atiStkSwQosDscpQueueMapQueue7 1.3.6.1.4.1.207.8.17.7.4.1.9
atiStkSwQosDscpQueueMapQueue7
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..255)  

atiStkSwQosDscpQueueMapDefaultMap 1.3.6.1.4.1.207.8.17.7.4.1.10
atiStkSwQosDscpQueueMapDefaultQueue
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

atiStkSwStaticTrunkTable 1.3.6.1.4.1.207.8.17.8.1
This table contains a list of static trunk configuration present in the switch stack.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwStaticTrunkEntry

atiStkSwStaticTrunkEntry 1.3.6.1.4.1.207.8.17.8.1.1
This object specifies an entry in 'atiStkSwStaticTrunkTable' that describes the static trunk informaton for a module present in the switch stack.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwStaticTrunkEntry  

atiStkSwStaticTrunkId 1.3.6.1.4.1.207.8.17.8.1.1.1
An identifier for a trunk.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwStaticTrunkName 1.3.6.1.4.1.207.8.17.8.1.1.2
Name of a trunk, once the entry has created, it cannot be changed.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..16)  

atiStkSwStaticTrunkMethod 1.3.6.1.4.1.207.8.17.8.1.1.3
Trunk distribution mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER srcMac(1), dstMac(2), src-dstMac(3), srcIp(4), dstIp(5), src-dstIp(6)  

atiStkSwStaticTrunkPortList 1.3.6.1.4.1.207.8.17.8.1.1.4
A list of ports that used as a trunk port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwStaticTrunkStatus 1.3.6.1.4.1.207.8.17.8.1.1.5
The status of the trunk, either up or down.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

atiStkSwACLConfigTable 1.3.6.1.4.1.207.8.17.9.1
This table contains a Access Control List (ACL) in the switch and their associated attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwACLConfigEntry

atiStkSwACLConfigEntry 1.3.6.1.4.1.207.8.17.9.1.1
This object specifies an entry in 'atiStkSwACLConfigTable' that describes the ACL in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwACLConfigEntry  

atiStkSwACLId 1.3.6.1.4.1.207.8.17.9.1.1.1
This object specifies the ID of the ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..700  

atiStkSwACLShowId 1.3.6.1.4.1.207.8.17.9.1.1.2
This object specifies the ID of the ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 3000..3699  

atiStkSwACLStatus 1.3.6.1.4.1.207.8.17.9.1.1.3
This object specifies the status of the ACL ID.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER create(1), delete(2)  

atiStkSwACLAction 1.3.6.1.4.1.207.8.17.9.1.1.4
The action of the ACL entry either deny or permit or copy to mirror.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deny(1), permit(2), copytomirror(3)  

atiStkSwACLTrafficType 1.3.6.1.4.1.207.8.17.9.1.1.5
The Object specifies the traffic type of the ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER icmp(1), ip(2), proto(3), tcp(4), udp(5)  

atiStkSwACLSrcType 1.3.6.1.4.1.207.8.17.9.1.1.6
The Object specifies the source type of the ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(1), host(2), ip(3)  

atiStkSwACLSrcAddr 1.3.6.1.4.1.207.8.17.9.1.1.7
This object displays the IPv4 address of the source of an ACL.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwACLSrcMask 1.3.6.1.4.1.207.8.17.9.1.1.8
This object displays the IPv4 mask of the source of an ACL.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwACLDestType 1.3.6.1.4.1.207.8.17.9.1.1.9
The Object specifies the destination type of the ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(1), host(2), ip(3)  

atiStkSwACLDestAddr 1.3.6.1.4.1.207.8.17.9.1.1.10
This object displays the IPv4 address of the destination of an ACL.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwACLDestMask 1.3.6.1.4.1.207.8.17.9.1.1.11
This object displays the IPv4 mask of the destination of an ACL.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwACLVlanId 1.3.6.1.4.1.207.8.17.9.1.1.12
This object specifies the Vlan ID of the ACL table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

atiStkSwACLProtocol 1.3.6.1.4.1.207.8.17.9.1.1.13
This object specifies the Protocol ID of the ACL table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

atiStkSwACLICMPType 1.3.6.1.4.1.207.8.17.9.1.1.14
This object specifies the ICMP Type of the ACL table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiStkSwACLUDPTCPSrcPort 1.3.6.1.4.1.207.8.17.9.1.1.15
The Object specifies the comparision of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eq(1), lt(2), gt(3), ne(4), range(5), noCompare(6)  

atiStkSwACLSrcPort1 1.3.6.1.4.1.207.8.17.9.1.1.16
This object specifies the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwACLSrcPort2 1.3.6.1.4.1.207.8.17.9.1.1.17
This object specifies the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwACLUDPTCPDestPort 1.3.6.1.4.1.207.8.17.9.1.1.18
The Object specifies the comparision of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eq(1), lt(2), gt(3), ne(4), range(5), noCompare(6)  

atiStkSwACLDestPort1 1.3.6.1.4.1.207.8.17.9.1.1.19
This object specifies the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwACLDestPort2 1.3.6.1.4.1.207.8.17.9.1.1.20
This object specifies the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwACLMACConfigTable 1.3.6.1.4.1.207.8.17.9.2
This table contains a Access Control List (ACL) in the switch and their associated attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwACLMACConfigEntry

atiStkSwACLMACConfigEntry 1.3.6.1.4.1.207.8.17.9.2.1
This object specifies an entry in 'atiStkSwACLMACConfigTable' that describes the ACL in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwACLMACConfigEntry  

atiStkSwACLMACId 1.3.6.1.4.1.207.8.17.9.2.1.1
This object specifies the ID of the ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..700  

atiStkSwACLMACShowId 1.3.6.1.4.1.207.8.17.9.2.1.2
This object specifies the ID of the ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 4000..4699  

atiStkSwACLMACStatus 1.3.6.1.4.1.207.8.17.9.2.1.3
This object specifies the status of the ACL ID.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER create(1), delete(2)  

atiStkSwACLMACAction 1.3.6.1.4.1.207.8.17.9.2.1.4
The action of the ACL entry either deny or permit or copy to mirror.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deny(1), permit(2), copytomirror(3)  

atiStkSwACLMACSrc 1.3.6.1.4.1.207.8.17.9.2.1.5
This object specifies the source type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(1), mac(2)  

atiStkSwACLMACDest 1.3.6.1.4.1.207.8.17.9.2.1.6
This object specifies destination type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(1), mac(2)  

atiStkSwACLMACSrcMac 1.3.6.1.4.1.207.8.17.9.2.1.7
The MAC address Mask used by this source.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..18)  

atiStkSwACLMACSrcMacMask 1.3.6.1.4.1.207.8.17.9.2.1.8
The MAC address Mask used by this source .
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..18)  

atiStkSwACLMACDestMac 1.3.6.1.4.1.207.8.17.9.2.1.9
The MAC address used by this destination.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..18)  

atiStkSwACLMACDestMacMask 1.3.6.1.4.1.207.8.17.9.2.1.10
The MAC address Mask used by this destination.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..18)  

atiStkSwACLInterfaceConfigTable 1.3.6.1.4.1.207.8.17.9.3
This table contains a Access Control List (ACL) in the switch and their associated attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwACLInterfaceConfigEntry

atiStkSwACLInterfaceConfigEntry 1.3.6.1.4.1.207.8.17.9.3.1
This object specifies an entry in 'atiStkSwACLMACConfigTable' that describes the ACL in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwACLInterfaceConfigEntry  

atiStkSwACLInterfaceModuleId 1.3.6.1.4.1.207.8.17.9.3.1.1
This object specifies the Module ID of the system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwACLInterfacePortId 1.3.6.1.4.1.207.8.17.9.3.1.2
This object specifies the Port ID of the system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..28  

atiStkSwACLInterfacaeACLId 1.3.6.1.4.1.207.8.17.9.3.1.3
This object specifies the created ACL ID.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwACLInterfacaeAddACLId 1.3.6.1.4.1.207.8.17.9.3.1.4
This object specifies the ACL ID to Add.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiStkSwACLInterfacaeRemoveACLId 1.3.6.1.4.1.207.8.17.9.3.1.5
This object specifies the ACL ID to Remove.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiStkSwAACLIpv4ConfigTable 1.3.6.1.4.1.207.8.17.18.1
This table contains a Access Control List (ACL) for Ipv4 addresses in the switch and their associated attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwAACLIpv4ConfigEntry

atiStkSwAACLIpv4ConfigEntry 1.3.6.1.4.1.207.8.17.18.1.1
This object specifies an entry in 'atiStkSwACLConfigTable' that describes the ACL in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwAACLIpv4ConfigEntry  

atiStkSwAACLId 1.3.6.1.4.1.207.8.17.18.1.1.1
This object specifies the ID of the ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

atiStkSwAACLStatus 1.3.6.1.4.1.207.8.17.18.1.1.2
This object specifies the status of the ACL ID.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER create(1), delete(2)  

atiStkSwAACLName 1.3.6.1.4.1.207.8.17.18.1.1.3
This object specifies the name of the ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLAction 1.3.6.1.4.1.207.8.17.18.1.1.4
The action of the ACL entry either deny or permit or copy to mirror.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deny(1), permit(2), copytomirror(3)  

atiStkSwAACLTrafficType 1.3.6.1.4.1.207.8.17.18.1.1.5
The Object specifies the traffic type of the ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER icmp(1), ip(2), proto(3), tcp(4), udp(5)  

atiStkSwAACLSrcType 1.3.6.1.4.1.207.8.17.18.1.1.6
The Object specifies the source type of the ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(1), host(2), ip(3)  

atiStkSwAACLSrcAddr 1.3.6.1.4.1.207.8.17.18.1.1.7
This object displays the IPv4 address of the source of an ACL.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwAACLSrcMask 1.3.6.1.4.1.207.8.17.18.1.1.8
This object displays the IPv4 mask of the source of an ACL.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwAACLDestType 1.3.6.1.4.1.207.8.17.18.1.1.9
The Object specifies the destination type of the ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(1), host(2), ip(3)  

atiStkSwAACLDestAddr 1.3.6.1.4.1.207.8.17.18.1.1.10
This object displays the IPv4 address of the destination of an ACL.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwAACLDestMask 1.3.6.1.4.1.207.8.17.18.1.1.11
This object displays the IPv4 mask of the destination of an ACL.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwAACLVlanId 1.3.6.1.4.1.207.8.17.18.1.1.12
This object specifies the Vlan ID of the ACL table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

atiStkSwAACLProtocol 1.3.6.1.4.1.207.8.17.18.1.1.13
This object specifies the Protocol ID of the ACL table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

atiStkSwAACLICMPType 1.3.6.1.4.1.207.8.17.18.1.1.14
This object specifies the ICMP Type of the ACL table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiStkSwAACLUDPTCPSrcPort 1.3.6.1.4.1.207.8.17.18.1.1.15
The Object specifies the comparision of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eq(1), lt(2), gt(3), ne(4), range(5), noCompare(6)  

atiStkSwAACLSrcPort1 1.3.6.1.4.1.207.8.17.18.1.1.16
This object specifies the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwAACLSrcPort2 1.3.6.1.4.1.207.8.17.18.1.1.17
This object specifies the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwAACLUDPTCPDestPort 1.3.6.1.4.1.207.8.17.18.1.1.18
The Object specifies the comparision of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eq(1), lt(2), gt(3), ne(4), range(5), noCompare(6)  

atiStkSwAACLDestPort1 1.3.6.1.4.1.207.8.17.18.1.1.19
This object specifies the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwAACLDestPort2 1.3.6.1.4.1.207.8.17.18.1.1.20
This object specifies the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwAACLTimeRange 1.3.6.1.4.1.207.8.17.18.1.1.21
This object specifies the time range ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLIpv6ConfigTable 1.3.6.1.4.1.207.8.17.18.2
This table contains a Access Control List (ACL) for Ipv4 addresses in the switch and their associated attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwAACLIpv6ConfigEntry

atiStkSwAACLIpv6ConfigEntry 1.3.6.1.4.1.207.8.17.18.2.1
This object specifies an entry in 'atiStkSwACLConfigTable' that describes the ACL in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwAACLIpv6ConfigEntry  

atiStkSwAACLv6Id 1.3.6.1.4.1.207.8.17.18.2.1.1
This object specifies the ID of the ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwAACLv6Status 1.3.6.1.4.1.207.8.17.18.2.1.2
This object specifies the status of the ACL ID.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER create(1), delete(2)  

atiStkSwAACLv6Name 1.3.6.1.4.1.207.8.17.18.2.1.3
This object specifies the name of the ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLv6Action 1.3.6.1.4.1.207.8.17.18.2.1.4
The action of the ACL entry either deny or permit or copy to mirror.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deny(1), permit(2), copytomirror(3)  

atiStkSwAACLv6TrafficType 1.3.6.1.4.1.207.8.17.18.2.1.5
The Object specifies the traffic type of the ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER icmp(1), ip(2), proto(3), tcp(4), udp(5)  

atiStkSwAACLv6SrcType 1.3.6.1.4.1.207.8.17.18.2.1.6
The Object specifies the source type of the ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(1), host(2), ip(3)  

atiStkSwAACLv6SrcAddr 1.3.6.1.4.1.207.8.17.18.2.1.7
This object displays the IPv6 address of the source of an ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLv6SrcMask 1.3.6.1.4.1.207.8.17.18.2.1.8
This object displays the IPv6 mask of the source of an ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLv6DestType 1.3.6.1.4.1.207.8.17.18.2.1.9
The Object specifies the destination type of the ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(1), host(2), ip(3)  

atiStkSwAACLv6DestAddr 1.3.6.1.4.1.207.8.17.18.2.1.10
This object displays the IPv6 address of the destination of an ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLv6DestMask 1.3.6.1.4.1.207.8.17.18.2.1.11
This object displays the IPv6 mask of the destination of an ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLv6VlanId 1.3.6.1.4.1.207.8.17.18.2.1.12
This object specifies the Vlan ID of the ACL table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

atiStkSwAACLv6Protocol 1.3.6.1.4.1.207.8.17.18.2.1.13
This object specifies the Protocol ID of the ACL table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

atiStkSwAACLv6ICMPType 1.3.6.1.4.1.207.8.17.18.2.1.14
This object specifies the ICMP Type of the ACL table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiStkSwAACLv6UDPTCPSrcPort 1.3.6.1.4.1.207.8.17.18.2.1.15
The Object specifies the comparision of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eq(1), lt(2), gt(3), ne(4), range(5), noCompare(6)  

atiStkSwAACLv6SrcPort1 1.3.6.1.4.1.207.8.17.18.2.1.16
This object specifies the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwAACLv6SrcPort2 1.3.6.1.4.1.207.8.17.18.2.1.17
This object specifies the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwAACLv6UDPTCPDestPort 1.3.6.1.4.1.207.8.17.18.2.1.18
The Object specifies the comparision of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eq(1), lt(2), gt(3), ne(4), range(5), noCompare(6)  

atiStkSwAACLv6DestPort1 1.3.6.1.4.1.207.8.17.18.2.1.19
This object specifies the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwAACLv6DestPort2 1.3.6.1.4.1.207.8.17.18.2.1.20
This object specifies the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwAACLv6TimeRange 1.3.6.1.4.1.207.8.17.18.2.1.21
This object specifies the time range ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLInterfaceConfigTable 1.3.6.1.4.1.207.8.17.18.3
This table contains a Access Control List (ACL) in the switch and their associated attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwAACLInterfaceConfigEntry

atiStkSwAACLInterfaceConfigEntry 1.3.6.1.4.1.207.8.17.18.3.1
This object specifies an entry in 'atiStkSwACLMACConfigTable' that describes the ACL in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwAACLInterfaceConfigEntry  

atiStkSwAACLInterfaceModuleId 1.3.6.1.4.1.207.8.17.18.3.1.1
This object specifies the Module ID of the system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwAACLInterfacePortId 1.3.6.1.4.1.207.8.17.18.3.1.2
This object specifies the Port ID of the system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..28  

atiStkSwAACLInterfacaeACLName 1.3.6.1.4.1.207.8.17.18.3.1.3
This object specifies the created ACL ID.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLInterfacaeAddACLName 1.3.6.1.4.1.207.8.17.18.3.1.4
This object specifies the ACL ID to Add.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLInterfacaeRemoveACLName 1.3.6.1.4.1.207.8.17.18.3.1.5
This object specifies the ACL ID to Remove.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLTimeRangeConfigTable 1.3.6.1.4.1.207.8.17.18.4
This table contains a time range Access Control List (ACL) in the switch and their associated attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwAACLTimeRangeConfigEntry

atiStkSwAACLTimeRangeConfigEntry 1.3.6.1.4.1.207.8.17.18.4.1
This object specifies an entry in 'atiStkSwAACLTimeRangeAbsoluteConfigTable' that describes the ACL in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwAACLTimeRangeConfigEntry  

atiStkSwAACLTimeRangeEntry 1.3.6.1.4.1.207.8.17.18.4.1.1
This object specifies the entry of the time range ACL.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

atiStkSwAACLTimeRangeName 1.3.6.1.4.1.207.8.17.18.4.1.2
This object specifies the Name of the time range ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLTimeRangeType 1.3.6.1.4.1.207.8.17.18.4.1.3
This object specifies the type of the time range ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER absolute(1), periodic(2), none(3)  

atiStkSwAACLTimeRangeAbsoluteStartTime 1.3.6.1.4.1.207.8.17.18.4.1.4
This object specifies the start time of the time range ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLTimeRangeAbsoluteEndTime 1.3.6.1.4.1.207.8.17.18.4.1.5
This object specifies the end time of the time range ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLTimeRangePeriodicFrequency 1.3.6.1.4.1.207.8.17.18.4.1.6
This object specifies the Frequency of days for periodic time range ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER day(1), daily(2), weekdays(3), weekends(4), notvalid(5), select(6)  

atiStkSwAACLTimeRangePeriodicStartDay 1.3.6.1.4.1.207.8.17.18.4.1.7
This object specifies the start day for periodic time range ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6), sunday(7)  

atiStkSwAACLTimeRangePeriodicEndDay 1.3.6.1.4.1.207.8.17.18.4.1.8
This object specifies the end day for periodic time range ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6), sunday(7)  

atiStkSwAACLTimeRangePeriodicStartTime 1.3.6.1.4.1.207.8.17.18.4.1.9
This object specifies the start time of the periodic time range ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLTimeRangePeriodicEndTime 1.3.6.1.4.1.207.8.17.18.4.1.10
This object specifies the end time of the periodic time range ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLTimeRangeStatus 1.3.6.1.4.1.207.8.17.18.4.1.11
This object specifies the status of the time range ACL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER create(1), delete(2)  

atiStkSwAACLIPV4MACConfigTable 1.3.6.1.4.1.207.8.17.18.5
This table contains a Access Control List (ACL) in the switch and their associated attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwAACLIPV4MACConfigEntry

atiStkSwAACLIPV4MACConfigEntry 1.3.6.1.4.1.207.8.17.18.5.1
This object specifies an entry in 'atiStkSwACLMACConfigTable' that describes the ACL in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwAACLIPV4MACConfigEntry  

atiStkSwAACLIPV4MACId 1.3.6.1.4.1.207.8.17.18.5.1.1
This object specifies the ID of the ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..700  

atiStkSwAACLIPV4MACName 1.3.6.1.4.1.207.8.17.18.5.1.2
This object specifies the name of the ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwAACLIPV4MACStatus 1.3.6.1.4.1.207.8.17.18.5.1.3
This object specifies the status of the ACL ID.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER create(1), delete(2)  

atiStkSwAACLIPV4MACAction 1.3.6.1.4.1.207.8.17.18.5.1.4
The action of the ACL entry either deny or permit or copy to mirror.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deny(1), permit(2), copytomirror(3)  

atiStkSwAACLIPV4MACSrc 1.3.6.1.4.1.207.8.17.18.5.1.5
This object specifies the source type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(1), mac(2)  

atiStkSwAACLIPV4MACDest 1.3.6.1.4.1.207.8.17.18.5.1.6
This object specifies destination type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(1), mac(2)  

atiStkSwAACLIPV4MACSrcMac 1.3.6.1.4.1.207.8.17.18.5.1.7
The MAC address Mask used by this source.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..18)  

atiStkSwAACLIPV4MACSrcMacMask 1.3.6.1.4.1.207.8.17.18.5.1.8
The MAC address Mask used by this source .
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..18)  

atiStkSwAACLIPV4MACDestMac 1.3.6.1.4.1.207.8.17.18.5.1.9
The MAC address used by this destination.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..18)  

atiStkSwAACLIPV4MACDestMacMask 1.3.6.1.4.1.207.8.17.18.5.1.10
The MAC address Mask used by this destination.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..18)  

atiStkSwAACLIPV4MACVlanId 1.3.6.1.4.1.207.8.17.18.5.1.11
This object specifies the Vlan ID of the ACL table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

atiStkSwAACLIPV4MACTimeRange 1.3.6.1.4.1.207.8.17.18.5.1.12
This object specifies the time range ACL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwMSTPMstConfigTable 1.3.6.1.4.1.207.8.17.19.1
OBJECT IDENTIFIER    

atiStkSwMSTPMstRegion 1.3.6.1.4.1.207.8.17.19.1.1
Set the Region name for MSTP.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwMSTPMstRevision 1.3.6.1.4.1.207.8.17.19.1.2
Set the revision number for MSTP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwMSTPMstInstanceConfigTable 1.3.6.1.4.1.207.8.17.19.2
This table contains a mst-config Instance associated attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwMSTPMstInstanceConfigEntry

atiStkSwMSTPMstInstanceConfigEntry 1.3.6.1.4.1.207.8.17.19.2.1
This object specifies an entry in 'atiStkSwMSTPMstInstanceConfigTable' that describes the mst config in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwMSTPMstInstanceConfigEntry  

atiStkSwMSTPMstInstanceId 1.3.6.1.4.1.207.8.17.19.2.1.1
This object specifies the Instance ID for MSTP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..15  

atiStkSwMSTPMstInstanceVlan 1.3.6.1.4.1.207.8.17.19.2.1.2
This object associates the Instance ID with vlanId for MSTP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

atiStkSwMSTPMstInstancePriority 1.3.6.1.4.1.207.8.17.19.2.1.3
This object associates the Instance ID with priority for MSTP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..61440  

atiStkSwMSTPMstInterfaceConfigTable 1.3.6.1.4.1.207.8.17.19.3
This table contains a mstp interface level config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwMSTPMstInterfaceConfigEntry

atiStkSwMSTPMstInterfaceConfigEntry 1.3.6.1.4.1.207.8.17.19.3.1
This object specifies an entry in 'atiStkSwMSTPMstInterfaceConfigTable' that describes the mstp interface levl config in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwMSTPMstInterfaceConfigEntry  

atiStkSwMSTPMstInterfaceModuleId 1.3.6.1.4.1.207.8.17.19.3.1.1
This object specifies the module ID for MSTP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwMSTPMstInterfacePortId 1.3.6.1.4.1.207.8.17.19.3.1.2
This object specifies the port ID for MSTP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwMSTPMstInterfaceInstanceId 1.3.6.1.4.1.207.8.17.19.3.1.3
This object associates the port ID with instance id for MSTP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..15  

atiStkSwMSTPMstInterfacePathCost 1.3.6.1.4.1.207.8.17.19.3.1.4
This object associates the path cost with instance id for MSTP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..200000000  

atiStkSwMSTPMstInterfacePriority 1.3.6.1.4.1.207.8.17.19.3.1.5
This object associates the priority with instance id for MSTP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..61440  

atiStkSwMVRConfigTable 1.3.6.1.4.1.207.8.17.20.1
OBJECT IDENTIFIER    

atiStkSwMVRStatus 1.3.6.1.4.1.207.8.17.20.1.1
Set the status for MVR.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

atiStkSwMVRGroupIp 1.3.6.1.4.1.207.8.17.20.1.2
Set the group IP address for MVR.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwMVRVlan 1.3.6.1.4.1.207.8.17.20.1.3
Set the group IP address for MVR.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

atiStkSwMVRInterfaceConfigTable 1.3.6.1.4.1.207.8.17.20.2
This table contains a MVR interface level attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwMVRInterfaceConfigEntry

atiStkSwMVRInterfaceConfigEntry 1.3.6.1.4.1.207.8.17.20.2.1
This object specifies an entry in 'atiStkSwMVRInterfaceConfigTable' that describes the MVR config in switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwMVRInterfaceConfigEntry  

atiStkSwMVRInterfaceIndex 1.3.6.1.4.1.207.8.17.20.2.1.1
This object specifies the index for MVR.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwMVRInterfacePortId 1.3.6.1.4.1.207.8.17.20.2.1.2
This object specifies the port ID for MVR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwMVRInterfaceType 1.3.6.1.4.1.207.8.17.20.2.1.3
This object associates the type with port Id for MSTP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER source(1), receiver(2), none(3)  

atiStkSwMVRConfigGroupIpTable 1.3.6.1.4.1.207.8.17.20.3
This table contains a MVR Group ip attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwMVRConfigGroupIpEntry

atiStkSwMVRConfigGroupIpEntry 1.3.6.1.4.1.207.8.17.20.3.1
This object specifies an entry in 'atiStkSwMVRConfigGroupIpTable' that describes the MVR config Group ip in switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwMVRConfigGroupIpEntry  

atiStkSwMVRGroupIpIndex 1.3.6.1.4.1.207.8.17.20.3.1.1
This object specifies the index for MVR Group ip.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwMVRGroupIp 1.3.6.1.4.1.207.8.17.20.3.1.2
This object specifies the group ip for MVR.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwPSTACKConfigTable 1.3.6.1.4.1.207.8.17.21.1
OBJECT IDENTIFIER    

atiStkSwPSTACKNoofModules 1.3.6.1.4.1.207.8.17.21.1.1
Set the Number of modules for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwPSTACKTopology 1.3.6.1.4.1.207.8.17.21.1.2
Set the Topology for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), chain(1), ring(2), standalone(3)  

atiStkSwPSTACKLclModID 1.3.6.1.4.1.207.8.17.21.1.3
Set the Local Module ID for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiStkSwPSTACKLclMacAdd 1.3.6.1.4.1.207.8.17.21.1.4
Set the Mac Address for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiStkSwPSTACKMasterModId 1.3.6.1.4.1.207.8.17.21.1.5
Set the Master Module ID for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiStkSwPSTACKMasterMacAdd 1.3.6.1.4.1.207.8.17.21.1.6
Set the Master Mac Address for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiStkSwPSTACKSlaveMacAdd1 1.3.6.1.4.1.207.8.17.21.1.7
Set the Slave Mac Address 1 for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiStkSwPSTACKSlaveMacAdd2 1.3.6.1.4.1.207.8.17.21.1.8
Set the Slave Mac Address 2 for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiStkSwPSTACKSlaveMacAdd3 1.3.6.1.4.1.207.8.17.21.1.9
Set the Slave Mac Address 3 for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiStkSwPSTACKSlaveMacAdd4 1.3.6.1.4.1.207.8.17.21.1.10
Set the Slave Mac Address 4 for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiStkSwPSTACKSlaveMacAdd5 1.3.6.1.4.1.207.8.17.21.1.11
Set the Slave Mac Address 5 for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiStkSwPSTACKSlaveMacAdd6 1.3.6.1.4.1.207.8.17.21.1.12
Set the Slave Mac Address 6 for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiStkSwPSTACKSlaveMacAdd7 1.3.6.1.4.1.207.8.17.21.1.13
Set the Slave Mac Address 7 for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiStkSwPSTACKInterfaceConfigTable 1.3.6.1.4.1.207.8.17.21.2
This table contains a PStack interface level attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwPSTACKInterfaceConfigEntry

atiStkSwPSTACKInterfaceConfigEntry 1.3.6.1.4.1.207.8.17.21.2.1
This object specifies an entry in 'atiStkSwPStackInterfaceConfigTable' that describes the PStack config in switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwPSTACKInterfaceConfigEntry  

atiStkSwPSTACKInterfaceDeviceId 1.3.6.1.4.1.207.8.17.21.2.1.1
This object specifies the Device ID for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwPSTACKInterfaceMacAddress 1.3.6.1.4.1.207.8.17.21.2.1.2
This object associates the Mac Address with Device Id for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiStkSwPSTACKInterfaceSwVersion 1.3.6.1.4.1.207.8.17.21.2.1.3
This object associates the Software Version with Device Id for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwPSTACKInterfaceModel 1.3.6.1.4.1.207.8.17.21.2.1.4
This object associates the Model type with Device Id for PStack.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwPSTACKDeviceIDConfigTable 1.3.6.1.4.1.207.8.17.21.3
OBJECT IDENTIFIER    

atiStkSwPSTACKDeviceID 1.3.6.1.4.1.207.8.17.21.3.1
Set the Device ID for PSTACK.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiStkSwPSTACKRebootConfigTable 1.3.6.1.4.1.207.8.17.21.4
OBJECT IDENTIFIER    

atiStkSwPSTACKRebootDeviceID 1.3.6.1.4.1.207.8.17.21.4.1
Set Reboot for PSTACK.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER device1(1), device2(2), device3(3), device4(4), device5(5), device6(6), device7(7), device8(8), all(9)  

atiStkSwLldpConfig 1.3.6.1.4.1.207.8.17.10.1
OBJECT IDENTIFIER    

atiStkSwLldpRun 1.3.6.1.4.1.207.8.17.10.1.1
The operational mode, whether enabled or disabled, of LLDP on the device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpTimer 1.3.6.1.4.1.207.8.17.10.1.2
The interval at which LLDP frames are transmitted on behalf of this LLDP agent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..32768  

atiStkSwLldpHoldMultiplier 1.3.6.1.4.1.207.8.17.10.1.3
The time-to-live value expressed as a multiple of the atiStkSwLldpTimer object.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..10  

atiStkSwLldpReinit 1.3.6.1.4.1.207.8.17.10.1.4
The atiStkSwLldpReinit indicates the delay (in units of seconds) from when lldp feature of a particular port becomes 'disabled' until re-initialization will be attempted.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

atiStkSwLldpTxDelay 1.3.6.1.4.1.207.8.17.10.1.5
The atiStkSwLldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8192  

atiStkSwLldpNotificationInterval 1.3.6.1.4.1.207.8.17.10.1.6
This object controls the transmission of LLDP notifications. The agent must not generate more than one lldpRemTablesChange notification-event in the indicated period.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..3600  

atiStkSwLldpFaststartCount 1.3.6.1.4.1.207.8.17.10.1.7
The atiStkSwLldpFaststartCoun
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

atiStkSwLldpNonStrictMedTlvOrderCheck 1.3.6.1.4.1.207.8.17.10.1.8
The atiStkSwLldpNonStrictMedTlvOrderCheck
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpConfigPortTable 1.3.6.1.4.1.207.8.17.10.1.9
The table that controls LLDP frame transmission on individual ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpConfigPortEntry

atiStkSwLldpConfigPortEntry 1.3.6.1.4.1.207.8.17.10.1.9.1
LLDP configuration information for a particular port. This configuration parameter controls the transmission and the reception of LLDP frames on those ports whose rows are created in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpConfigPortEntry  

atiStkSwLldpConfigModuleId 1.3.6.1.4.1.207.8.17.10.1.9.1.1
This object specifies the ID of a module present in the switch stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

atiStkSwLldpConfigPortId 1.3.6.1.4.1.207.8.17.10.1.9.1.2
The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the atiStkSwLldpConfigPortTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

atiStkSwLldpConfigDirection 1.3.6.1.4.1.207.8.17.10.1.9.1.3
This object specifies the operation mode of the LLDP for the indicated port - whether to transmit and/or receive LLDP package, or do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER transmit(1), receive(2), both(3), none(4)  

atiStkSwLldpConfigNotif 1.3.6.1.4.1.207.8.17.10.1.9.1.4
The atiStkSwLldpConfigNotif controls, on a per port basis, whether or not notifications from the agent are enabled. The value enabled(1) means that notifications are enabled; the value disabled(2) means that they are not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpConfigMgmtAddr 1.3.6.1.4.1.207.8.17.10.1.9.1.5
This object displays the IPv4 address to be advertised to neighbors (via the Management Address TLV) via specified ports.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

atiStkSwLldpConfigTlvSelect 1.3.6.1.4.1.207.8.17.10.1.9.1.6
This enables specified optional TLVs for transmission in LLDP advertisement via the specified ports.
Status: current Access: read-write
OBJECT-TYPE    
  BITS portDesc(31), sysName(30), sysDesc(29), sysCap(28), mgmtAddr(27), portVlan(26), portAndProtocolVlans(25), vlanNames(24), protocolIds(23), macPhyConfig(22), powerMgmt(21), linkAggregation(20), maxFrameSize(19)  

atiStkSwLldpConfigTlvDeselect 1.3.6.1.4.1.207.8.17.10.1.9.1.7
This disables specified optional TLVs for transmission in LLDP advertisement via the specified ports.
Status: current Access: read-write
OBJECT-TYPE    
  BITS portDesc(31), sysName(30), sysDesc(29), sysCap(28), mgmtAddr(27), portVlan(26), portAndProtocolVlans(25), vlanNames(24), protocolIds(23), macPhyConfig(22), powerMgmt(21), linkAggregation(20), maxFrameSize(19)  

atiStkSwLldpConfigMedNotif 1.3.6.1.4.1.207.8.17.10.1.9.1.8
The atiStkSwLldpConfigMedNotif controls, on a per port basis, whether or not MED notifications from the agent are enabled. The value enabled(1) means that notifications are enabled; the value disabled(2) means that they are not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpConfigMedTlvSelect 1.3.6.1.4.1.207.8.17.10.1.9.1.9
This enables specified MED TLVs for transmission in LLDP advertisement via the specified ports.
Status: current Access: read-write
OBJECT-TYPE    
  BITS capabilities(31), networkPolicy(30), location(29), powerMgmtExt(28), inventoryMgmt(27)  

atiStkSwLldpConfigMedTlvDeselect 1.3.6.1.4.1.207.8.17.10.1.9.1.10
This disables specified MED TLVs for transmission in LLDP advertisement via the specified ports.
Status: current Access: read-write
OBJECT-TYPE    
  BITS capabilities(31), networkPolicy(30), location(29), powerMgmtExt(28), inventoryMgmt(27)  

atiStkSwLldpConfigLocCoord 1.3.6.1.4.1.207.8.17.10.1.9.1.11
This assigns an LLDP Coordinate location information to the specified ports. Set 0 to reset.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiStkSwLldpConfigLocCivic 1.3.6.1.4.1.207.8.17.10.1.9.1.12
This assigns an LLDP Civic location information to the specified ports. Set 0 to reset.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiStkSwLldpConfigLocElin 1.3.6.1.4.1.207.8.17.10.1.9.1.13
This assigns an LLDP Elin location information to the specified ports. Set 0 to reset.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiStkSwLldpStats 1.3.6.1.4.1.207.8.17.10.2
OBJECT IDENTIFIER    

atiStkSwLldpStatsGlobalReset 1.3.6.1.4.1.207.8.17.10.2.1
This clears all the LLDP statistics (packet and event counters).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

atiStkSwLldpStatsTotalFramesOut 1.3.6.1.4.1.207.8.17.10.2.2
The number of LLDP frames transmitted by this LLDP agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsTotalFramesIn 1.3.6.1.4.1.207.8.17.10.2.3
The number of valid LLDP frames received by this LLDP agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsTotalFramesInError 1.3.6.1.4.1.207.8.17.10.2.4
The number of invalid LLDP frames received by this LLDP agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsTotalFramesInDropped 1.3.6.1.4.1.207.8.17.10.2.5
The number of LLDP frames received by this LLDP agent, and then discarded for any reason.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsTotalTLVsUnrecognized 1.3.6.1.4.1.207.8.17.10.2.6
The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsTotalTLVsDiscarded 1.3.6.1.4.1.207.8.17.10.2.7
The number of LLDP TLVs discarded for any reason by this LLDP agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsTotalNewNeighbors 1.3.6.1.4.1.207.8.17.10.2.8
The number of times the complete set of information advertised by a particular MSAP has been inserted into the Neighbor/Remote table.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsTotalNeighborsDeleted 1.3.6.1.4.1.207.8.17.10.2.9
The number of times the complete set of information advertised by a particular MSAP has been deleted from the Neighbor/Remote table.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsTotalNeighborsDropped 1.3.6.1.4.1.207.8.17.10.2.10
The number of times the complete set of information advertised by a particular MSAP could not be entered into the Neighbor/Remote table.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsTotalNeighborsAgedOut 1.3.6.1.4.1.207.8.17.10.2.11
The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in the Neighbor/Remote table.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsPortTable 1.3.6.1.4.1.207.8.17.10.2.12
A table containing LLDP transmission and reception statistics for individual ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpStatsPortEntry

atiStkSwLldpStatsPortEntry 1.3.6.1.4.1.207.8.17.10.2.12.1
LLDP frame transmission and reception statistics for a particular port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpStatsPortEntry  

atiStkSwLldpStatsModuleId 1.3.6.1.4.1.207.8.17.10.2.12.1.1
This object specifies the ID of a module present in the switch stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpStatsPortId 1.3.6.1.4.1.207.8.17.10.2.12.1.2
The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpStatsTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

atiStkSwLldpStatsFramesOut 1.3.6.1.4.1.207.8.17.10.2.12.1.3
The number of LLDP frames transmitted by this LLDP agent on the indicated port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsFramesIn 1.3.6.1.4.1.207.8.17.10.2.12.1.4
The number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsFramesInError 1.3.6.1.4.1.207.8.17.10.2.12.1.5
The number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsFramesInDropped 1.3.6.1.4.1.207.8.17.10.2.12.1.6
The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLDP header formating problems may exist with the local LLDP agent in the sending system or that LLDPDU validation problems may exist with the local LLDP agent in the receiving system.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsTLVsUnrecognized 1.3.6.1.4.1.207.8.17.10.2.12.1.7
The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port. An unrecognized TLV is referred to as the TLV whose type value is in the range of reserved TLV types (000 1001 - 111 1110) in Table 9.1 of IEEE Std 802.1AB-2005. An unrecognized TLV may be a basic management TLV from a later LLDP version.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsTLVsDiscarded 1.3.6.1.4.1.207.8.17.10.2.12.1.8
The number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsNewNeighbors 1.3.6.1.4.1.207.8.17.10.2.12.1.9
The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in the Neighbor/Remote table associated with the indicated port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsNeighborsDeleted 1.3.6.1.4.1.207.8.17.10.2.12.1.10
The number of times the complete set of information advertised by a particular MSAP has been deleted from the Neighbor/Remote table associated with the indicated port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsNeighborsDropped 1.3.6.1.4.1.207.8.17.10.2.12.1.11
The number of times the complete set of information advertised by a particular MSAP could not be entered into the Neighbor/Remote table associated with the indicated port because of insufficient resources.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsNeighborsAgedOut 1.3.6.1.4.1.207.8.17.10.2.12.1.12
The counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in the Neighbor/Remote table because the information timeliness interval has expired.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atiStkSwLldpStatsReset 1.3.6.1.4.1.207.8.17.10.2.12.1.13
This clears all the LLDP statistics (packet and event counters) associated with the indicated port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

atiStkSwLldpLocalData 1.3.6.1.4.1.207.8.17.10.3
OBJECT IDENTIFIER    

atiStkSwLldpLocalInfoTable 1.3.6.1.4.1.207.8.17.10.3.1
This table contains one or more rows per port information associated with the local system known to this agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpLocalInfoEntry

atiStkSwLldpLocalInfoEntry 1.3.6.1.4.1.207.8.17.10.3.1.1
Information about a particular port component.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpLocalInfoEntry  

atiStkSwLldpLocModuleId 1.3.6.1.4.1.207.8.17.10.3.1.1.1
This object specifies the ID of a module present in the switch stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpLocPortNum 1.3.6.1.4.1.207.8.17.10.3.1.1.2
The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the atiStkSwLldpLocalInfoTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

atiStkSwLldpLocChassisIdSubtype 1.3.6.1.4.1.207.8.17.10.3.1.1.3
The type of encoding used to identify the chassis associated with the local system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER chassisComponent(1), interfaceAlias(2), portComponent(3), macAddress(4), networkAddress(5), interfaceName(6), local(7)  

atiStkSwLldpLocChassisId 1.3.6.1.4.1.207.8.17.10.3.1.1.4
The string value used to identify the chassis component associated with the local system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpLocPortIdSubtype 1.3.6.1.4.1.207.8.17.10.3.1.1.5
The type of port identifier encoding used in the associated atiStkSwLldpLocPortId object.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7)  

atiStkSwLldpLocPortId 1.3.6.1.4.1.207.8.17.10.3.1.1.6
The string value used to identify the port component associated with a given port in the local system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpLocTtl 1.3.6.1.4.1.207.8.17.10.3.1.1.7
Time-to-live advertised by the given port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpLocPortDesc 1.3.6.1.4.1.207.8.17.10.3.1.1.8
The string value used to identify the 802 LAN station's port description associated with the local system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpLocSysName 1.3.6.1.4.1.207.8.17.10.3.1.1.9
The string value used to identify the system name of the local system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpLocSysDesc 1.3.6.1.4.1.207.8.17.10.3.1.1.10
The string value used to identify the system description of the local system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpLocSysCapSupported 1.3.6.1.4.1.207.8.17.10.3.1.1.11
The bitmap value used to identify which system capabilities are supported on the local system.
Status: current Access: read-only
OBJECT-TYPE    
  BITS other(0), repeater(1), bridge(2), wlanAccessPoint(3), router(4), telephone(5), docsisCableDevice(6), stationOnly(7)  

atiStkSwLldpLocSysCapEnabled 1.3.6.1.4.1.207.8.17.10.3.1.1.12
The bitmap value used to identify which system capabilities are enabled on the local system.
Status: current Access: read-only
OBJECT-TYPE    
  BITS other(0), repeater(1), bridge(2), wlanAccessPoint(3), router(4), telephone(5), docsisCableDevice(6), stationOnly(7)  

atiStkSwLldpLocManAddrSubtype 1.3.6.1.4.1.207.8.17.10.3.1.1.13
The type of management address identifier encoding used in the associated atiStkSwLldpLocManagmentAddr object.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(0), ipV4(1), ipV6(2), nsap(3), hdlc(4), bbn1822(5), all802(6), e163(7), e164(8), f69(9), x121(10), ipx(11), appleTalk(12), decnetIV(13), banyanVines(14), e164withNsap(15), dns(16), distinguishedName(17), asNumber(18), xtpOverIpv4(19), xtpOverIpv6(20), xtpNativeModeXTP(21), fibreChannelWWPN(22), fibreChannelWWNN(23), gwid(24), afi(25), reserved(65535)  

atiStkSwLldpLocManAddr 1.3.6.1.4.1.207.8.17.10.3.1.1.14
The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management entity.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

atiStkSwLldpLocManAddrLen 1.3.6.1.4.1.207.8.17.10.3.1.1.15
The total lenght of the management address subtype and the management address fields in LLDPDUs transmitted by the local LLDP agent.The management address length field is needed so that the receiving systems that do not implement SNMP will not be required to implement an iana family numbers/address length equivalency table in order to decode the management address
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpLocManAddrIfSubtype 1.3.6.1.4.1.207.8.17.10.3.1.1.16
The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the local system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ifIndex(2), systemPortNumber(3)  

atiStkSwLldpLocManAddrIfId 1.3.6.1.4.1.207.8.17.10.3.1.1.17
The integer value used to identify the interface number regarding the management address component associated with the local system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpLocManAddrOID 1.3.6.1.4.1.207.8.17.10.3.1.1.18
The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the local system agent.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atiStkSwLldpDot1LocTable 1.3.6.1.4.1.207.8.17.10.3.2
This table contains one row per port for IEEE 802.1 organizationally defined LLDP extension on the local system known to this agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpDot1LocEntry

atiStkSwLldpDot1LocEntry 1.3.6.1.4.1.207.8.17.10.3.2.1
Information about IEEE 802.1 organizationally defined LLDP extension.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpDot1LocEntry  

atiStkSwLldpDot1LocModuleId 1.3.6.1.4.1.207.8.17.10.3.2.1.1
This object specifies the ID of a module present in the switch stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpDot1LocPortNum 1.3.6.1.4.1.207.8.17.10.3.2.1.2
The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

atiStkSwLldpDot1LocPortVlanId 1.3.6.1.4.1.207.8.17.10.3.2.1.3
The integer value used to identify the port's VLAN identifier associated with the local system. A value of zero shall be used if the system either does not know the PVID or does not support port-based VLAN operation.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4094  

atiStkSwLldpDot1LocProtoVlanId 1.3.6.1.4.1.207.8.17.10.3.2.1.4
The integer value used to identify the port and protocol VLANs associated with the given port associated with the local system. A value of zero shall be used if the system either does not know the protocol VLAN ID (PPVID) or does not support port and protocol VLAN operation.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4094  

atiStkSwLldpDot1LocProtoVlanSupported 1.3.6.1.4.1.207.8.17.10.3.2.1.5
The truth value used to indicate whether the given port (associated with the local system) supports port and protocol VLANs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot1LocProtoVlanEnabled 1.3.6.1.4.1.207.8.17.10.3.2.1.6
The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the local system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot1LocVlanId 1.3.6.1.4.1.207.8.17.10.3.2.1.7
The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port is compatible.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpDot1LocVlanName 1.3.6.1.4.1.207.8.17.10.3.2.1.8
The string value used to identify VLAN name identified by the Vlan Id associated with the given port on the local system. This object should contain the value of the dot1QVLANStaticName object (defined in IETF RFC 2674) identified with the given atiStkSwLldpDot1LocVlanId.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpDot1LocProtocolId 1.3.6.1.4.1.207.8.17.10.3.2.1.9
The octet string value used to identify the protocols associated with the given port of the local system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpLocalDot3Data 1.3.6.1.4.1.207.8.17.10.3.3
OBJECT IDENTIFIER    

atiStkSwLldpDot3LocTable 1.3.6.1.4.1.207.8.17.10.3.3.1
This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpDot3LocEntry

atiStkSwLldpDot3LocEntry 1.3.6.1.4.1.207.8.17.10.3.3.1.1
Information about a particular port component.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpDot3LocEntry  

atiStkSwLldpDot3LocModuleId 1.3.6.1.4.1.207.8.17.10.3.3.1.1.1
This object specifies the ID of a module present in the switch stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpDot3LocPortNum 1.3.6.1.4.1.207.8.17.10.3.3.1.1.2
The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

atiStkSwLldpDot3LocPortAutoNegSupported 1.3.6.1.4.1.207.8.17.10.3.3.1.1.3
The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot3LocPortAutoNegEnabled 1.3.6.1.4.1.207.8.17.10.3.3.1.1.4
The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot3LocPortAutoNegAdvertisedCap 1.3.6.1.4.1.207.8.17.10.3.3.1.1.5
This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the local system.
Status: current Access: read-only
OBJECT-TYPE    
  BITS bOther(0), b10baseT(1), b10baseTFD(2), b100baseT4(3), b100baseTX(4), b100baseTXFD(5), b100baseT2(6), b100baseT2FD(7), bFdxPause(8), bFdxAPause(9), bFdxSPause(10), bFdxBPause(11), b1000baseX(12), b1000baseXFD(13), b1000baseT(14), b1000baseTFD(15)  

atiStkSwLldpDot3LocPortOperMauType 1.3.6.1.4.1.207.8.17.10.3.3.1.1.6
An integer value that indicates the operational MAU type of the given port on the local system. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in IETF RFC 3636 (or subsequent revisions) and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field will be 29. For MAU types not listed in RFC 3636 (or subsequent revisions), the value of this field shall be set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dot3MauTypeAUI(1), dot3MauType10Base5(2), dot3MauTypeFoirl(3), dot3MauType10Base2(4), dot3MauType10BaseT(5), dot3MauType10BaseFP(6), dot3MauType10BaseFB(7), dot3MauType10BaseFL(8), dot3MauType10Broad36(9), dot3MauType10BaseTHD(10), dot3MauType10BaseTFD(11), dot3MauType10BaseFLHD(12), dot3MauType10BaseFLFD(13), dot3MauType100BaseT4(14), dot3MauType100BaseTXHD(15), dot3MauType100BaseTXFD(16), dot3MauType100BaseFXHD(17), dot3MauType100BaseFXFD(18), dot3MauType100BaseT2HD(19), dot3MauType100BaseT2FD(20), dot3MauType1000BaseXHD(21), dot3MauType1000BaseXFD(22), dot3MauType1000BaseLXHD(23), dot3MauType1000BaseLXFD(24), dot3MauType1000BaseSXHD(25), dot3MauType1000BaseSXFD(26), dot3MauType1000BaseCXHD(27), dot3MauType1000BaseCXFD(28), dot3MauType1000BaseTHD(29), dot3MauType1000BaseTFD(30), dot3MauType10GigBaseX(31), dot3MauType10GigBaseLX4(32), dot3MauType10GigBaseR(33), dot3MauType10GigBaseER(34), dot3MauType10GigBaseLR(35), dot3MauType10GigBaseSR(36), dot3MauType10GigBaseW(37), dot3MauType10GigBaseEW(38), dot3MauType10GigBaseLW(39), dot3MauType10GigBaseSW(40)  

atiStkSwLldpDot3LocPowerPortClass 1.3.6.1.4.1.207.8.17.10.3.3.1.1.7
The value that identifies the port Class of the given port associated with the local system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pClassPSE(1), pClassPD(2)  

atiStkSwLldpDot3LocPowerMDISupported 1.3.6.1.4.1.207.8.17.10.3.3.1.1.8
The truth value used to indicate whether the MDI power is supported on the given port associated with the local system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot3LocPowerMDIEnabled 1.3.6.1.4.1.207.8.17.10.3.3.1.1.9
The truth value used to identify whether MDI power is enabled on the given port associated with the local system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot3LocPowerPairControlable 1.3.6.1.4.1.207.8.17.10.3.3.1.1.10
The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the local system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot3LocPowerPairs 1.3.6.1.4.1.207.8.17.10.3.3.1.1.11
This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the local system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1 | 2  

atiStkSwLldpDot3LocPowerClass 1.3.6.1.4.1.207.8.17.10.3.3.1.1.12
This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the local system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1 | 2 | 3 | 4 | 5  

atiStkSwLldpDot3LocLinkAggStatus 1.3.6.1.4.1.207.8.17.10.3.3.1.1.13
The bitmap value contains the link aggregation capabilities and the current aggregation status of the link.
Status: current Access: read-only
OBJECT-TYPE    
  BITS aggCapable(0), aggEnabled(1)  

atiStkSwLldpDot3LocLinkAggPortId 1.3.6.1.4.1.207.8.17.10.3.3.1.1.14
This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component in link aggregation. If the port is not in link aggregation state and/or it does not support link aggregation, this value should be set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..2147483647  

atiStkSwLldpDot3LocMaxFrameSize 1.3.6.1.4.1.207.8.17.10.3.3.1.1.15
An integer value indicating the maximum supported frame size in octets on the given port of the local system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwLldpLocalMedData 1.3.6.1.4.1.207.8.17.10.3.4
OBJECT IDENTIFIER    

atiStkSwLldpMedLocTable 1.3.6.1.4.1.207.8.17.10.3.4.1
This table contains one row per port of LLDP-MED information on the local system known to this agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpMedLocEntry

atiStkSwLldpMedLocEntry 1.3.6.1.4.1.207.8.17.10.3.4.1.1
Information about a particular port component.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpMedLocEntry  

atiStkSwLldpMedLocModuleId 1.3.6.1.4.1.207.8.17.10.3.4.1.1.1
This object specifies the ID of a module present in the switch stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpMedLocPortNum 1.3.6.1.4.1.207.8.17.10.3.4.1.1.2
The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

atiStkSwLldpMedLocDeviceClass 1.3.6.1.4.1.207.8.17.10.3.4.1.1.3
Local Device Class.
Status: current Access: read-only
OBJECT-TYPE    
  AtiStkSwLldpMedDeviceClass  

atiStkSwLldpMedLocCapabilities 1.3.6.1.4.1.207.8.17.10.3.4.1.1.4
The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible for the respective port on the LLDP agent of the device. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent supports the corresponding TLV.
Status: current Access: read-only
OBJECT-TYPE    
  AtiStkSwLldpMedCapabilities  

atiStkSwLldpMedLocMediaPolicyAppType 1.3.6.1.4.1.207.8.17.10.3.4.1.1.5
The media type that defines the primary function of the application for the policy advertised by an endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  PolicyAppType  

atiStkSwLldpMedLocMediaPolicyPriority 1.3.6.1.4.1.207.8.17.10.3.4.1.1.7
This object contains the value of the 802.1p priority which is associated with the given port on the local system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

atiStkSwLldpMedLocMediaPolicyDscp 1.3.6.1.4.1.207.8.17.10.3.4.1.1.8
This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63  

atiStkSwLldpMedLocMediaPolicyUnknown 1.3.6.1.4.1.207.8.17.10.3.4.1.1.9
A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' indicates that this network policy is defined
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

atiStkSwLldpMedLocMediaPolicyTagged 1.3.6.1.4.1.207.8.17.10.3.4.1.1.10
A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

atiStkSwLldpMedLocHardwareRev 1.3.6.1.4.1.207.8.17.10.3.4.1.1.11
The vendor-specific hardware revision string as advertised by the endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedLocFirmwareRev 1.3.6.1.4.1.207.8.17.10.3.4.1.1.12
The vendor-specific firmware revision string as advertised by the endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedLocSoftwareRev 1.3.6.1.4.1.207.8.17.10.3.4.1.1.13
The vendor-specific software revision string as advertised by the endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedLocSerialNum 1.3.6.1.4.1.207.8.17.10.3.4.1.1.14
The vendor-specific serial number as advertised by the endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedLocMfgName 1.3.6.1.4.1.207.8.17.10.3.4.1.1.15
The vendor-specific manufacturer name as advertised by the endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedLocModelName 1.3.6.1.4.1.207.8.17.10.3.4.1.1.16
The vendor-specific model name as advertised by the endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedLocAssetID 1.3.6.1.4.1.207.8.17.10.3.4.1.1.17
The vendor-specific asset tracking identifier as advertised by the endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedLocCoordLocation 1.3.6.1.4.1.207.8.17.10.3.4.1.1.18
Coordinate based location information
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpMedLocCivicLocation 1.3.6.1.4.1.207.8.17.10.3.4.1.1.19
Civic location information
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpMedLocElinLocation 1.3.6.1.4.1.207.8.17.10.3.4.1.1.20
Elin location information
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpRemoteData 1.3.6.1.4.1.207.8.17.10.4
OBJECT IDENTIFIER    

atiStkSwLldpRemBaseTable 1.3.6.1.4.1.207.8.17.10.4.1
This table contains one or more rows per physical network connection known to this agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpRemBaseEntry

atiStkSwLldpRemBaseEntry 1.3.6.1.4.1.207.8.17.10.4.1.1
Information about a particular physical network connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpRemBaseEntry  

atiStkSwLldpRemModuleNum 1.3.6.1.4.1.207.8.17.10.4.1.1.1
This object specifies the ID of a module present in the switch stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpRemPortNum 1.3.6.1.4.1.207.8.17.10.4.1.1.2
The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The atiStkSwLldpRemPortNum identifies the port on which the remote system information is received.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpRemIndex 1.3.6.1.4.1.207.8.17.10.4.1.1.3
This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwLldpRemChassisIdSubtype 1.3.6.1.4.1.207.8.17.10.4.1.1.4
The type of encoding used to identify the chassis associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER chassisComponent(1), interfaceAlias(2), portComponent(3), macAddress(4), networkAddress(5), interfaceName(6), local(7)  

atiStkSwLldpRemChassisId 1.3.6.1.4.1.207.8.17.10.4.1.1.5
The string value used to identify the chassis component associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpRemPortIdSubtype 1.3.6.1.4.1.207.8.17.10.4.1.1.6
The type of port identifier encoding used in the associated atiStkSwLldpRemPortId object.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7)  

atiStkSwLldpRemPortId 1.3.6.1.4.1.207.8.17.10.4.1.1.7
The string value used to identify the port component associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpRemTtl 1.3.6.1.4.1.207.8.17.10.4.1.1.8
Time-to-live advertised by the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpRemPortDesc 1.3.6.1.4.1.207.8.17.10.4.1.1.9
The string value used to identify the description of the given port associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpRemSysName 1.3.6.1.4.1.207.8.17.10.4.1.1.10
The string value used to identify the system name of the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpRemSysDesc 1.3.6.1.4.1.207.8.17.10.4.1.1.11
The string value used to identify the system description of the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpRemSysCapSupported 1.3.6.1.4.1.207.8.17.10.4.1.1.12
The bitmap value used to identify which system capabilities are supported on the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  BITS other(0), repeater(1), bridge(2), wlanAccessPoint(3), router(4), telephone(5), docsisCableDevice(6), stationOnly(7)  

atiStkSwLldpRemSysCapEnabled 1.3.6.1.4.1.207.8.17.10.4.1.1.13
The bitmap value used to identify which system capabilities are enabled on the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  BITS other(0), repeater(1), bridge(2), wlanAccessPoint(3), router(4), telephone(5), docsisCableDevice(6), stationOnly(7)  

atiStkSwLldpRemManAddrSubtype 1.3.6.1.4.1.207.8.17.10.4.1.1.14
The type of management address identifier encoding used in the associated atiStkSwLldpRemManAddr object.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(0), ipV4(1), ipV6(2), nsap(3), hdlc(4), bbn1822(5), all802(6), e163(7), e164(8), f69(9), x121(10), ipx(11), appleTalk(12), decnetIV(13), banyanVines(14), e164withNsap(15), dns(16), distinguishedName(17), asNumber(18), xtpOverIpv4(19), xtpOverIpv6(20), xtpNativeModeXTP(21), fibreChannelWWPN(22), fibreChannelWWNN(23), gwid(24), afi(25), reserved(65535)  

atiStkSwLldpRemManAddr 1.3.6.1.4.1.207.8.17.10.4.1.1.15
The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

atiStkSwLldpRemManAddrIfSubtype 1.3.6.1.4.1.207.8.17.10.4.1.1.16
The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ifIndex(2), systemPortNumber(3)  

atiStkSwLldpRemManAddrIfId 1.3.6.1.4.1.207.8.17.10.4.1.1.17
The integer value used to identify the interface number regarding the management address component associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpRemManAddrOID 1.3.6.1.4.1.207.8.17.10.4.1.1.18
The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atiStkSwLldpDot1RemTable 1.3.6.1.4.1.207.8.17.10.4.2
This table contains one or more rows per physical network connection known to this agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpDot1RemEntry

atiStkSwLldpDot1RemEntry 1.3.6.1.4.1.207.8.17.10.4.2.1
Information about a particular port component.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpDot1RemEntry  

atiStkSwLldpDot1RemModuleId 1.3.6.1.4.1.207.8.17.10.4.2.1.1
This object specifies the ID of a module present in the switch stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpDot1RemPortNum 1.3.6.1.4.1.207.8.17.10.4.2.1.2
The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The atiStkSwLldpRemPortNum identifies the port on which the remote system information is received.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpDot1RemIndex 1.3.6.1.4.1.207.8.17.10.4.2.1.3
This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwLldpDot1RemPortVlanId 1.3.6.1.4.1.207.8.17.10.4.2.1.4
The integer value used to identify the port's VLAN identifier associated with the remote system. if the remote system either does not know the PVID or does not support port-based VLAN operation, the value of atiStkSwLldpDot1RemPortVlanId should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4094  

atiStkSwLldpDot1RemProtoVlanId 1.3.6.1.4.1.207.8.17.10.4.2.1.5
The integer value used to identify the port and protocol VLANs associated with the given port associated with the remote system. If port and protocol VLANs are not supported on the given port associated with the remote system, or if the port is not enabled with any port and protocol VLAN, the value of atiStkSwLldpDot1RemProtoVlanId should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4094  

atiStkSwLldpDot1RemProtoVlanSupported 1.3.6.1.4.1.207.8.17.10.4.2.1.6
The truth value used to indicate whether the given port (associated with the remote system) is capable of supporting port and protocol VLANs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot1RemProtoVlanEnabled 1.3.6.1.4.1.207.8.17.10.4.2.1.7
The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot1RemVlanId 1.3.6.1.4.1.207.8.17.10.4.2.1.8
The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port of the remote system is compatible.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpDot1RemVlanName 1.3.6.1.4.1.207.8.17.10.4.2.1.9
The string value used to identify VLAN name identified by the VLAN Id associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpDot1RemProtocolId 1.3.6.1.4.1.207.8.17.10.4.2.1.10
The octet string value used to identify the protocols associated with the given port of remote system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpRemDot3Data 1.3.6.1.4.1.207.8.17.10.4.3
OBJECT IDENTIFIER    

atiStkSwLldpDot3RemTable 1.3.6.1.4.1.207.8.17.10.4.3.1
This table contains Ethernet port information (as a part of the LLDP 802.3 organizational extension) of the remote system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpDot3RemEntry

atiStkSwLldpDot3RemEntry 1.3.6.1.4.1.207.8.17.10.4.3.1.1
Information about a particular physical network connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpDot3RemEntry  

atiStkSwLldpDot3RemModuleNum 1.3.6.1.4.1.207.8.17.10.4.3.1.1.1
This object specifies the ID of a module present in the switch stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpDot3RemPortNum 1.3.6.1.4.1.207.8.17.10.4.3.1.1.2
The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The atiStkSwLldpDot3RemPortNum identifies the port on which the remote system information is received.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpDot3RemIndex 1.3.6.1.4.1.207.8.17.10.4.3.1.1.3
This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpDot3RemPortAutoNegSupported 1.3.6.1.4.1.207.8.17.10.4.3.1.1.4
The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot3RemPortAutoNegEnabled 1.3.6.1.4.1.207.8.17.10.4.3.1.1.5
The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot3RemPortAutoNegAdvertisedCap 1.3.6.1.4.1.207.8.17.10.4.3.1.1.6
This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  BITS bOther(0), b10baseT(1), b10baseTFD(2), b100baseT4(3), b100baseTX(4), b100baseTXFD(5), b100baseT2(6), b100baseT2FD(7), bFdxPause(8), bFdxAPause(9), bFdxSPause(10), bFdxBPause(11), b1000baseX(12), b1000baseXFD(13), b1000baseT(14), b1000baseTFD(15)  

atiStkSwLldpDot3RemPortOperMauType 1.3.6.1.4.1.207.8.17.10.4.3.1.1.7
An integer value that indicates the operational MAU type of the sending device. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in in IETF RFC 3636 (or subsequent revisions) and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field will be 29. For MAU types not listed in RFC 3636 (or subsequent revisions), the value of this field shall be set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dot3MauTypeAUI(1), dot3MauType10Base5(2), dot3MauTypeFoirl(3), dot3MauType10Base2(4), dot3MauType10BaseT(5), dot3MauType10BaseFP(6), dot3MauType10BaseFB(7), dot3MauType10BaseFL(8), dot3MauType10Broad36(9), dot3MauType10BaseTHD(10), dot3MauType10BaseTFD(11), dot3MauType10BaseFLHD(12), dot3MauType10BaseFLFD(13), dot3MauType100BaseT4(14), dot3MauType100BaseTXHD(15), dot3MauType100BaseTXFD(16), dot3MauType100BaseFXHD(17), dot3MauType100BaseFXFD(18), dot3MauType100BaseT2HD(19), dot3MauType100BaseT2FD(20), dot3MauType1000BaseXHD(21), dot3MauType1000BaseXFD(22), dot3MauType1000BaseLXHD(23), dot3MauType1000BaseLXFD(24), dot3MauType1000BaseSXHD(25), dot3MauType1000BaseSXFD(26), dot3MauType1000BaseCXHD(27), dot3MauType1000BaseCXFD(28), dot3MauType1000BaseTHD(29), dot3MauType1000BaseTFD(30), dot3MauType10GigBaseX(31), dot3MauType10GigBaseLX4(32), dot3MauType10GigBaseR(33), dot3MauType10GigBaseER(34), dot3MauType10GigBaseLR(35), dot3MauType10GigBaseSR(36), dot3MauType10GigBaseW(37), dot3MauType10GigBaseEW(38), dot3MauType10GigBaseLW(39), dot3MauType10GigBaseSW(40)  

atiStkSwLldpDot3RemPowerPortClass 1.3.6.1.4.1.207.8.17.10.4.3.1.1.8
The value that identifies the port Class of the given port associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pClassPSE(1), pClassPD(2)  

atiStkSwLldpDot3RemPowerMDISupported 1.3.6.1.4.1.207.8.17.10.4.3.1.1.9
The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot3RemPowerMDIEnabled 1.3.6.1.4.1.207.8.17.10.4.3.1.1.10
The truth value used to identify whether MDI power is enabled on the given port associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot3RemPowerPairControlable 1.3.6.1.4.1.207.8.17.10.4.3.1.1.11
The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiStkSwLldpDot3RemPowerPairs 1.3.6.1.4.1.207.8.17.10.4.3.1.1.12
This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1 | 2  

atiStkSwLldpDot3RemPowerClass 1.3.6.1.4.1.207.8.17.10.4.3.1.1.13
This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1 | 2 | 3 | 4 | 5  

atiStkSwLldpDot3RemLinkAggStatus 1.3.6.1.4.1.207.8.17.10.4.3.1.1.14
The bitmap value contains the link aggregation capabilities and the current aggregation status of the link.
Status: current Access: read-only
OBJECT-TYPE    
  BITS aggCapable(7), aggEnabled(8)  

atiStkSwLldpDot3RemLinkAggPortId 1.3.6.1.4.1.207.8.17.10.4.3.1.1.15
This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component associated with the remote system. If the remote port is not in link aggregation state and/or it does not support link aggregation, this value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..2147483647  

atiStkSwLldpDot3RemMaxFrameSize 1.3.6.1.4.1.207.8.17.10.4.3.1.1.16
An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

atiStkSwLldpRemMedData 1.3.6.1.4.1.207.8.17.10.4.4
OBJECT IDENTIFIER    

atiStkSwLldpMedRemTable 1.3.6.1.4.1.207.8.17.10.4.4.1
This table contains LLDP-MED information of the remote system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpMedRemEntry

atiStkSwLldpMedRemEntry 1.3.6.1.4.1.207.8.17.10.4.4.1.1
Information about a particular physical network connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpMedRemEntry  

atiStkSwLldpMedRemModuleId 1.3.6.1.4.1.207.8.17.10.4.4.1.1.1
This object specifies the ID of a module present in the switch stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpMedRemPortNum 1.3.6.1.4.1.207.8.17.10.4.4.1.1.2
The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpMedRemIndex 1.3.6.1.4.1.207.8.17.10.4.4.1.1.3
This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpMedRemDeviceClass 1.3.6.1.4.1.207.8.17.10.4.4.1.1.4
Device Class as advertised by the device remotely connected to the port.
Status: current Access: read-only
OBJECT-TYPE    
  AtiStkSwLldpMedDeviceClass  

atiStkSwLldpMedRemCapabilities 1.3.6.1.4.1.207.8.17.10.4.4.1.1.5
The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent has the capability to support the corresponding TLV.
Status: current Access: read-only
OBJECT-TYPE    
  AtiStkSwLldpMedCapabilities  

atiStkSwLldpMedRemMediaPolicyAppType 1.3.6.1.4.1.207.8.17.10.4.4.1.1.6
The media type that defines the primary function of the application for the policy advertised by the endpoint connected remotely to this port.
Status: current Access: not-accessible
OBJECT-TYPE    
  PolicyAppType  

atiStkSwLldpMedRemMediaPolicyVlanID 1.3.6.1.4.1.207.8.17.10.4.4.1.1.7
An extension of the VLAN Identifier for the remote system connected to this port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the device is using priority tagged frames, meaning that only the 802.1p priority level is significant and the default VID of the ingress port is being used instead. A value of 4095 is reserved for implementation use.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4094 | 4095  

atiStkSwLldpMedRemMediaPolicyPriority 1.3.6.1.4.1.207.8.17.10.4.4.1.1.8
This object contains the value of the 802.1p priority which is associated with the remote system connected at given port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

atiStkSwLldpMedRemMediaPolicyDscp 1.3.6.1.4.1.207.8.17.10.4.4.1.1.9
This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with remote system connected at the port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63  

atiStkSwLldpMedRemMediaPolicyUnknown 1.3.6.1.4.1.207.8.17.10.4.4.1.1.10
A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' indicates that this network policy is defined.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

atiStkSwLldpMedRemMediaPolicyTagged 1.3.6.1.4.1.207.8.17.10.4.4.1.1.11
A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

atiStkSwLldpMedRemHardwareRev 1.3.6.1.4.1.207.8.17.10.4.4.1.1.12
The vendor-specific hardware revision string as advertised by the remote endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedRemFirmwareRev 1.3.6.1.4.1.207.8.17.10.4.4.1.1.13
The vendor-specific firmware revision string as advertised by the remote endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedRemSoftwareRev 1.3.6.1.4.1.207.8.17.10.4.4.1.1.14
The vendor-specific software revision string as advertised by the remote endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedRemSerialNum 1.3.6.1.4.1.207.8.17.10.4.4.1.1.15
The vendor-specific serial number as advertised by the remote endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedRemMfgName 1.3.6.1.4.1.207.8.17.10.4.4.1.1.16
The vendor-specific manufacturer name as advertised by the remote endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedRemModelName 1.3.6.1.4.1.207.8.17.10.4.4.1.1.17
The vendor-specific model name as advertised by the remote endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedRemAssetID 1.3.6.1.4.1.207.8.17.10.4.4.1.1.18
The vendor-specific asset tracking identifier as advertised by the remote endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

atiStkSwLldpMedRemXPoEDeviceType 1.3.6.1.4.1.207.8.17.10.4.4.1.1.19
Defines the type of Power-via-MDI (Power over Ethernet) advertised by the remote device. A value pseDevice(2) indicates that the device is advertised as a Power Sourcing Entity (PSE). A value pdDevice(3) indicates that the device is advertised as a Powered Device (PD). A value none(4) indicates that the device does not support PoE.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), pseDevice(2), pdDevice(3), none(4)  

atiStkSwLldpMedRemXPoEPSEPowerAv 1.3.6.1.4.1.207.8.17.10.4.4.1.1.20
This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts on the remote device.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..1023  

atiStkSwLldpMedRemXPoEPSEPowerSource 1.3.6.1.4.1.207.8.17.10.4.4.1.1.21
Defines the type of PSE Power Source advertised by the remote device. A value primary(2) indicates that the device advertises its power source as primary. A value backup(3) indicates that the device advertises its power Source as backup.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), primary(2), backup(3)  

atiStkSwLldpMedRemXPoEPSEPowerPriority 1.3.6.1.4.1.207.8.17.10.4.4.1.1.22
This object contains the value of the PSE power priority advertised by the remote device. A value critical(2) indicates that the device advertises its power priority as critical, as per RFC 3621. A value high(3) indicates that the device advertises its power priority as high, as per RFC 3621. A value low(4) indicates that the device advertises its power priority as low, as per RFC 3621.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), critical(2), high(3), low(4)  

atiStkSwLldpMedRemXPoEPDPowerReq 1.3.6.1.4.1.207.8.17.10.4.4.1.1.23
This object contains the value of the power required by a PD connected remotely to the port expressed in units of 0.1 watts.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..1023  

atiStkSwLldpMedRemXPoEPDPowerSource 1.3.6.1.4.1.207.8.17.10.4.4.1.1.24
Defines the type of Power Source advertised as being used by the device connected remotely to the port. A value fromPSE(2) indicates that the device advertises its power source as received from a PSE. A value local(3) indicates that the device advertises its power source as local. A value localAndPSE(4) indicates that the device advertises its power source as using both local and PSE power.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), fromPSE(2), local(3), localAndPSE(4)  

atiStkSwLldpMedRemXPoEPDPowerPriority 1.3.6.1.4.1.207.8.17.10.4.4.1.1.25
Defines the priority advertised as being required by the PD connected remotely to the port. A value critical(2) indicates that the device advertises its power Priority as critical, as per RFC 3621. A value high(3) indicates that the device advertises its power Priority as high, as per RFC 3621. A value low(4) indicates that the device advertises its power Priority as low, as per RFC 3621.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), critical(2), high(3), low(4)  

atiStkSwLldpMedRemCoordLocation 1.3.6.1.4.1.207.8.17.10.4.4.1.1.26
Coordinate based location information
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpMedRemCivicLocation 1.3.6.1.4.1.207.8.17.10.4.4.1.1.27
Civic location information
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpMedRemElinLocation 1.3.6.1.4.1.207.8.17.10.4.4.1.1.28
Elin location information
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpRemResetTable 1.3.6.1.4.1.207.8.17.10.4.5
This table resets the Neighbor Table of the specified port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpRemResetEntry

atiStkSwLldpRemResetEntry 1.3.6.1.4.1.207.8.17.10.4.5.1
Selection of module and port number for Neighbor Table to be reset.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpRemResetEntry  

atiStkSwLldpRemResetModuleNum 1.3.6.1.4.1.207.8.17.10.4.5.1.1
This object specifies the ID of a module present in the switch stack.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiStkSwLldpRemResetPortNum 1.3.6.1.4.1.207.8.17.10.4.5.1.2
The index value used to identify the port component for Neighbor Table to be reset.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

atiStkSwLldpRemReset 1.3.6.1.4.1.207.8.17.10.4.5.1.3
Select 'yes' for Neighbor Table to be reset.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

atiStkSwLldpCivicLocationTable 1.3.6.1.4.1.207.8.17.10.5
A table of the LLDP civic-location.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpCivicLocationEntry

atiStkSwLldpCivicLocationEntry 1.3.6.1.4.1.207.8.17.10.5.1
Attributes of an LLDP civiv-location.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpCivicLocationEntry  

atiStkSwLldpCivicLocationIdentifier 1.3.6.1.4.1.207.8.17.10.5.1.1
Index into atiStkSwLldpCivicLocationTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwLldpCivicLocationValid 1.3.6.1.4.1.207.8.17.10.5.1.2
The civiv-location status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

atiStkSwLldpCoordLocationTable 1.3.6.1.4.1.207.8.17.10.6
A table of the LLDP coord-location.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpCoordLocationEntry

atiStkSwLldpCoordLocationEntry 1.3.6.1.4.1.207.8.17.10.6.1
Attributes of an LLDP coord-location.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpCoordLocationEntry  

atiStkSwLldpCoordLocationIdentifier 1.3.6.1.4.1.207.8.17.10.6.1.1
Index into atiStkSwLldpCoordLocationTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwLldpCoordLocationValid 1.3.6.1.4.1.207.8.17.10.6.1.2
The coord-location status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

atiStkSwLldpElinLocationTable 1.3.6.1.4.1.207.8.17.10.7
A table of the LLDP elin-location.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpElinLocationEntry

atiStkSwLldpElinLocationEntry 1.3.6.1.4.1.207.8.17.10.7.1
Attributes of an LLDP elin-location.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpElinLocationEntry  

atiStkSwLldpElinLocationIdentifier 1.3.6.1.4.1.207.8.17.10.7.1.1
Index into atiStkSwLldpElinLocationTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwLldpElinLocationElinId 1.3.6.1.4.1.207.8.17.10.7.1.2
The name of the elin-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpSetCivicLocationTable 1.3.6.1.4.1.207.8.17.10.8
A table of the LLDP set civic-location.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpSetCivicLocationEntry

atiStkSwLldpSetCivicLocationEntry 1.3.6.1.4.1.207.8.17.10.8.1
Attributes of an LLDP set civic-location.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpSetCivicLocationEntry  

atiStkSwLldpSetCivicLocationIdentifier 1.3.6.1.4.1.207.8.17.10.8.1.1
Index into atiStkSwLldpSetCivicLocationTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwLldpSetCivicLocationCountry 1.3.6.1.4.1.207.8.17.10.8.1.2
The country of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationState 1.3.6.1.4.1.207.8.17.10.8.1.3
The state of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationCounty 1.3.6.1.4.1.207.8.17.10.8.1.4
The county of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationCity 1.3.6.1.4.1.207.8.17.10.8.1.5
The city of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationDivision 1.3.6.1.4.1.207.8.17.10.8.1.6
The division of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationNeighborhood 1.3.6.1.4.1.207.8.17.10.8.1.7
The neighborhood of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationStreetGroup 1.3.6.1.4.1.207.8.17.10.8.1.8
The street group of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationLeadingStreetDirection 1.3.6.1.4.1.207.8.17.10.8.1.9
The leading street direction of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationTrailingStreetDirection 1.3.6.1.4.1.207.8.17.10.8.1.10
The trailing street direction of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationStreetSuffix 1.3.6.1.4.1.207.8.17.10.8.1.11
The street suffix of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationHouseNumber 1.3.6.1.4.1.207.8.17.10.8.1.12
The house number of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationHouseNumberSuffix 1.3.6.1.4.1.207.8.17.10.8.1.13
The house number suffix of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationLandmark 1.3.6.1.4.1.207.8.17.10.8.1.14
The landmark of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationAdditionalInformation 1.3.6.1.4.1.207.8.17.10.8.1.15
The additional information of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationName 1.3.6.1.4.1.207.8.17.10.8.1.16
The name of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationPostalCode 1.3.6.1.4.1.207.8.17.10.8.1.17
The postal code of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationBuilding 1.3.6.1.4.1.207.8.17.10.8.1.18
The building of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationUnit 1.3.6.1.4.1.207.8.17.10.8.1.19
The unit of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationFloor 1.3.6.1.4.1.207.8.17.10.8.1.20
The floor of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationRoom 1.3.6.1.4.1.207.8.17.10.8.1.21
The room of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationPlaceType 1.3.6.1.4.1.207.8.17.10.8.1.22
The place type of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationPostalCommunityName 1.3.6.1.4.1.207.8.17.10.8.1.23
The postal community name of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationPostOfficeBox 1.3.6.1.4.1.207.8.17.10.8.1.24
The post office box of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationAdditionalCode 1.3.6.1.4.1.207.8.17.10.8.1.25
The additional code of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationSeat 1.3.6.1.4.1.207.8.17.10.8.1.26
The seat of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationPrimaryRoadName 1.3.6.1.4.1.207.8.17.10.8.1.27
The primary road name of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationRoadSection 1.3.6.1.4.1.207.8.17.10.8.1.28
The road section of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationBranchRoadName 1.3.6.1.4.1.207.8.17.10.8.1.29
The branch road name of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationSubBranchRoadName 1.3.6.1.4.1.207.8.17.10.8.1.30
The sub branch road name of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationStreetNamePreModifier 1.3.6.1.4.1.207.8.17.10.8.1.31
The street name pre modifier of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationStreetNamePostModifier 1.3.6.1.4.1.207.8.17.10.8.1.32
The street name post modifier of the civic-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..250)  

atiStkSwLldpSetCivicLocationCreateDeleteIdentifier 1.3.6.1.4.1.207.8.17.10.8.1.33
Create and delete an identifier
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER create(1), delete(2)  

atiStkSwLldpSetCoordLocationTable 1.3.6.1.4.1.207.8.17.10.9
A table of the LLDP set Coord-location.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwLldpSetCoordLocationEntry

atiStkSwLldpSetCoordLocationEntry 1.3.6.1.4.1.207.8.17.10.9.1
Attributes of an LLDP set Coord-location.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwLldpSetCoordLocationEntry  

atiStkSwLldpSetCoordLocationIdentifier 1.3.6.1.4.1.207.8.17.10.9.1.1
Index into atiStkSwLldpSetCoordLocationTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiStkSwLldpSetCoordLocationLatitude 1.3.6.1.4.1.207.8.17.10.9.1.2
Latitude for set Coord-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpSetCoordLocationLatResolution 1.3.6.1.4.1.207.8.17.10.9.1.3
Latitude Resolution for set Coord-location.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..34  

atiStkSwLldpSetCoordLocationLongitude 1.3.6.1.4.1.207.8.17.10.9.1.4
Longitude for set Coord-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpSetCoordLocationLongiResolution 1.3.6.1.4.1.207.8.17.10.9.1.5
Longitude Resolution for set Coord-location.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..34  

atiStkSwLldpSetCoordLocationAltitude 1.3.6.1.4.1.207.8.17.10.9.1.6
Altitude for set Coord-location.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwLldpSetCoordLocationAltType 1.3.6.1.4.1.207.8.17.10.9.1.7
Alt Type for set Coord-location.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER meters(1), floors(2)  

atiStkSwLldpSetCoordLocationAltResolution 1.3.6.1.4.1.207.8.17.10.9.1.8
Alt Resolution for set Coord-location.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..30  

atiStkSwLldpSetCoordLocationDatum 1.3.6.1.4.1.207.8.17.10.9.1.9
Datum for set Coord-location.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wgs84(0), nad83-navd(1), nad83-mllw(2)  

atiSflowRcvrTable 1.3.6.1.4.1.207.8.17.11.1
A table of the receivers of sFlow information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiSflowRcvrEntry

atiSflowRcvrEntry 1.3.6.1.4.1.207.8.17.11.1.1
Attributes of an sFlow Receiver.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiSflowRcvrEntry  

atiSflowRcvrIndex 1.3.6.1.4.1.207.8.17.11.1.1.1
Index into sFlowReceiverTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiSflowRcvrAddress 1.3.6.1.4.1.207.8.17.11.1.1.2
The IP address of the sFlow collector. If set to 0.0.0.0 not sFlow datagrams will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiSflowRcvrPort 1.3.6.1.4.1.207.8.17.11.1.1.3
The destination port for sFlow datagrams.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiSflowFsTable 1.3.6.1.4.1.207.8.17.12.1
A table of the flow samplers within a device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiSflowFsEntry

atiSflowFsEntry 1.3.6.1.4.1.207.8.17.12.1.1
Attributes of a flow sampler.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiSflowFsEntry  

atiSflowFsPort 1.3.6.1.4.1.207.8.17.12.1.1.1
The sFlow instance for this flow sampler.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiSflowFsPacketSamplingRate 1.3.6.1.4.1.207.8.17.12.1.1.2
The statistical sampling rate for packet sampling from this source. Set to N to sample 1/Nth of the packets in the monitored flows. An agent should choose its own algorithm to introduce variance into the sampling so that exactly every Nth packet is not counted. A sampling rate of 1 counts all packets. A sampling rate of 0 disables sampling. The agent is permitted to have minimum and maximum allowable values for the sampling rate. A minimum rate lets the agent designer set an upper bound on the overhead associated with sampling, and a maximum rate may be the result of hardware restrictions (such as counter size). In addition not all values between the maximum and minimum may be realizable as the sampling rate (again because of implementation considerations). When the sampling rate is set the agent is free to adjust the value so that it lies between the maximum and minimum values and has the closest achievable value. When read, the agent must return the actual sampling rate it will be using (after the adjustments previously described). The sampling algorithm must converge so that over time the number of packets sampled approaches 1/Nth of the total number of packets in the monitored flows.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiSflowCpTable 1.3.6.1.4.1.207.8.17.13.1
A table of the counter pollers within a device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiSflowCpEntry

atiSflowCpEntry 1.3.6.1.4.1.207.8.17.13.1.1
Attributes of a counter poller.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiSflowCpEntry  

atiSflowCpPort 1.3.6.1.4.1.207.8.17.13.1.1.1
The sFlowInstance for this counter poller.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiSflowCpInterval 1.3.6.1.4.1.207.8.17.13.1.1.2
The maximum number of seconds between successive samples of the counters associated with this data source. A sampling interval of 0 disables counter sampling. The agent is permitted to have minimum and maximum allowable values for the counter polling interval. A minimum interval lets the agent designer set an upper bound on the overhead associated with polling, and a maximum interval may be the result of implementation restrictions (such as counter size). In addition not all values between the maximum and minimum may be realizable as the sampling interval (again because of implementation considerations). When the sampling rate is set the agent is free to adjust the value so that it lies between the maximum and minimum values and has the closest achievable value. When read, the agent must return the actual sampling interval it will be using (after the adjustments previously described). The sampling algorithm must converge so that over time the number of packets sampled approaches 1/Nth of the total number of packets in the monitored flows.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiSflowSetTable 1.3.6.1.4.1.207.8.17.14.1
A table of the sFlow set function.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiSflowSetEntry

atiSflowSetEntry 1.3.6.1.4.1.207.8.17.14.1.1
Attributes of an sFlow Set.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiSflowSetEntry  

atiSflowSetIndex 1.3.6.1.4.1.207.8.17.14.1.1.1
Index into sFlowSetTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiSflowSetAddress 1.3.6.1.4.1.207.8.17.14.1.1.2
The IP address of the sFlow collector. If set to 0.0.0.0 not sFlow datagrams will be sent.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

atiSflowSetPort 1.3.6.1.4.1.207.8.17.14.1.1.3
The port for sFlow Sampler or Poller.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiSflowSetStatus 1.3.6.1.4.1.207.8.17.14.1.1.4
The set status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

atiSflowEnableTable 1.3.6.1.4.1.207.8.17.15.1
A table of the sFlow enable function.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiSflowEnableEntry

atiSflowEnableEntry 1.3.6.1.4.1.207.8.17.15.1.1
Attributes of an sFlow Enable.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiSflowEnableEntry  

atiSflowEnablePort 1.3.6.1.4.1.207.8.17.15.1.1.1
Index into sFlowEnableTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiSflowEnableStatus 1.3.6.1.4.1.207.8.17.15.1.1.2
The enable status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

atiAQosPortConfigurationTable 1.3.6.1.4.1.207.8.17.17.1
atiAQosPortConfigurationTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiAQosPortConfigurationEntry

atiAQosPortConfigurationEntry 1.3.6.1.4.1.207.8.17.17.1.1
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiAQosPortConfigurationEntry  

atiAQosPortConfigurationPortId 1.3.6.1.4.1.207.8.17.17.1.1.1
Index into atiAQosPortConfigurationTable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiAQosPortConfigurationStatus 1.3.6.1.4.1.207.8.17.17.1.1.2
Status
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

atiAQosPortConfigurationDefaultQueue 1.3.6.1.4.1.207.8.17.17.1.1.3
Default queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiAQosPortConfigurationSchedularAndQueueWeightList 1.3.6.1.4.1.207.8.17.17.1.1.4
Schedular and queue weight list
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiAQosPortConfigurationWRREgressRateQ0 1.3.6.1.4.1.207.8.17.17.1.1.5
WRR egress rate Queue 0
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiAQosPortConfigurationWRREgressRateQ1 1.3.6.1.4.1.207.8.17.17.1.1.6
WRR egress rate Queue 1
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiAQosPortConfigurationWRREgressRateQ2 1.3.6.1.4.1.207.8.17.17.1.1.7
WRR egress rate Queue 2
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiAQosPortConfigurationWRREgressRateQ3 1.3.6.1.4.1.207.8.17.17.1.1.8
WRR egress rate Queue 3
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiAQosPortConfigurationWRREgressRateQ4 1.3.6.1.4.1.207.8.17.17.1.1.9
WRR egress rate Queue 4
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiAQosPortConfigurationWRREgressRateQ5 1.3.6.1.4.1.207.8.17.17.1.1.10
WRR egress rate Queue 5
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiAQosPortConfigurationWRREgressRateQ6 1.3.6.1.4.1.207.8.17.17.1.1.11
WRR egress rate Queue 6
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiAQosPortConfigurationWRREgressRateQ7 1.3.6.1.4.1.207.8.17.17.1.1.12
WRR egress rate Queue 7
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiAQosCosQueueMapTable 1.3.6.1.4.1.207.8.17.17.2
atiAQosCosQueueMapTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiAQosCosQueueMapEntry

atiAQosCosQueueMapEntry 1.3.6.1.4.1.207.8.17.17.2.1
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiAQosCosQueueMapEntry  

atiAQosCosQueueMapPortId 1.3.6.1.4.1.207.8.17.17.2.1.1
Index into atiAQosCosQueueMapTable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiAQosCosQueueMapCos0Queue 1.3.6.1.4.1.207.8.17.17.2.1.2
Cos 0 queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiAQosCosQueueMapCos1Queue 1.3.6.1.4.1.207.8.17.17.2.1.3
Cos 1 queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiAQosCosQueueMapCos2Queue 1.3.6.1.4.1.207.8.17.17.2.1.4
Cos 2 queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiAQosCosQueueMapCos3Queue 1.3.6.1.4.1.207.8.17.17.2.1.5
Cos 3 queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiAQosCosQueueMapCos4Queue 1.3.6.1.4.1.207.8.17.17.2.1.6
Cos 4 queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiAQosCosQueueMapCos5Queue 1.3.6.1.4.1.207.8.17.17.2.1.7
Cos 5 queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiAQosCosQueueMapCos6Queue 1.3.6.1.4.1.207.8.17.17.2.1.8
Cos 6 queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiAQosCosQueueMapCos7Queue 1.3.6.1.4.1.207.8.17.17.2.1.9
Cos 7 queue
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

atiAQosCosQueueMapDefaultMap 1.3.6.1.4.1.207.8.17.17.2.1.10
Default map
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

atiAQosDscpQueueMapTable 1.3.6.1.4.1.207.8.17.17.3
atiAQosDscpQueueMapTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiAQosDscpQueueMapEntry

atiAQosDscpQueueMapEntry 1.3.6.1.4.1.207.8.17.17.3.1
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiAQosDscpQueueMapEntry  

atiAQosDscpQueueMapPortId 1.3.6.1.4.1.207.8.17.17.3.1.1
Index into atiAQosDscpQueueMapTable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiAQosDscpQueueMapQueue0 1.3.6.1.4.1.207.8.17.17.3.1.2
Queue 0
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..150)  

atiAQosDscpQueueMapQueue1 1.3.6.1.4.1.207.8.17.17.3.1.3
Queue 1
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..150)  

atiAQosDscpQueueMapQueue2 1.3.6.1.4.1.207.8.17.17.3.1.4
Queue 2
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..150)  

atiAQosDscpQueueMapQueue3 1.3.6.1.4.1.207.8.17.17.3.1.5
Queue 3
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..150)  

atiAQosDscpQueueMapQueue4 1.3.6.1.4.1.207.8.17.17.3.1.6
Queue 4
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..150)  

atiAQosDscpQueueMapQueue5 1.3.6.1.4.1.207.8.17.17.3.1.7
Queue 5
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..150)  

atiAQosDscpQueueMapQueue6 1.3.6.1.4.1.207.8.17.17.3.1.8
Queue 6
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..150)  

atiAQosDscpQueueMapQueue7 1.3.6.1.4.1.207.8.17.17.3.1.9
Queue 7
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..150)  

atiAQosDscpQueueMapDefaultMap 1.3.6.1.4.1.207.8.17.17.3.1.10
Default map
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

atiAQosAggregatePolicerTable 1.3.6.1.4.1.207.8.17.17.4
atiAQosAggregatePolicerTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiAQosAggregatePolicerEntry

atiAQosAggregatePolicerEntry 1.3.6.1.4.1.207.8.17.17.4.1
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiAQosAggregatePolicerEntry  

atiAQosAggregatePolicerIndex 1.3.6.1.4.1.207.8.17.17.4.1.1
Index into atiAQosAggregatePolicerTable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiAQosAggregatePolicerName 1.3.6.1.4.1.207.8.17.17.4.1.2
Aggregate police name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiAQosAggregatePolicerRate 1.3.6.1.4.1.207.8.17.17.4.1.3
Rate
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER single-rate(0), twin-rate(1)  

atiAQosAggregatePolicerCIRkbps 1.3.6.1.4.1.207.8.17.17.4.1.4
CIR kbps
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16000000  

atiAQosAggregatePolicerCBSb 1.3.6.1.4.1.207.8.17.17.4.1.5
CBS b
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1677216  

atiAQosAggregatePolicerPIRkbps 1.3.6.1.4.1.207.8.17.17.4.1.6
PIR kbps
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16000000  

atiAQosAggregatePolicerPBSb 1.3.6.1.4.1.207.8.17.17.4.1.7
PBS b
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1677216  

atiAQosAggregatePolicerAction 1.3.6.1.4.1.207.8.17.17.4.1.8
Action
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER drop-red(14), policed-dscp(1)  

atiAQosInterfacePolicyTable 1.3.6.1.4.1.207.8.17.17.5
atiAQosInterfacePolicyTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiAQosInterfacePolicyEntry

atiAQosInterfacePolicyEntry 1.3.6.1.4.1.207.8.17.17.5.1
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiAQosInterfacePolicyEntry  

atiAQosInterfacePolicyPortId 1.3.6.1.4.1.207.8.17.17.5.1.1
Index into atiAQosInterfacePolicyTable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiAQosInterfacePolicyMapName 1.3.6.1.4.1.207.8.17.17.5.1.2
Policy map name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiAQosPolicyMapTable 1.3.6.1.4.1.207.8.17.17.6
atiAQosPolicyMapTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiAQosPolicyMapEntry

atiAQosPolicyMapEntry 1.3.6.1.4.1.207.8.17.17.6.1
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiAQosPolicyMapEntry  

atiAQosPolicyMapIndex 1.3.6.1.4.1.207.8.17.17.6.1.1
Index into atiAQosPolicyMapTable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiAQosPolicyMapPolicyName 1.3.6.1.4.1.207.8.17.17.6.1.2
Policy name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiAQosPolicyMapClassName 1.3.6.1.4.1.207.8.17.17.6.1.3
Class name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiAQosPolicyMapDefaultAction 1.3.6.1.4.1.207.8.17.17.6.1.4
Action of default class-map
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), permit(1), deny(2)  

atiAQosPolicyMapCosAction 1.3.6.1.4.1.207.8.17.17.6.1.5
Cos action
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), cos0(1), cos1(2), cos2(3), cos3(4), cos4(5), cos5(6), cos6(7), cos7(8)  

atiAQosPolicyMapDscpAction 1.3.6.1.4.1.207.8.17.17.6.1.6
Dscp action
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiAQosPolicyMapIpNextHopAction 1.3.6.1.4.1.207.8.17.17.6.1.7
Ip next hop action
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiAQosPolicyMapQueueAction 1.3.6.1.4.1.207.8.17.17.6.1.8
Queue action
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiAQosPolicyMapTrustAction 1.3.6.1.4.1.207.8.17.17.6.1.9
Trust action
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cos(0), dscp(1)  

atiAQosPolicyMapPoliceAggregateAction 1.3.6.1.4.1.207.8.17.17.6.1.10
Police aggregate action
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiAQosPolicyMapStormAction 1.3.6.1.4.1.207.8.17.17.6.1.11
Storm action
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

atiAQosPolicyMapStormDowntimeAction 1.3.6.1.4.1.207.8.17.17.6.1.12
Storm downtime action
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiAQosPolicyMapStormRateAction 1.3.6.1.4.1.207.8.17.17.6.1.13
Storm rate action
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiAQosPolicyMapStormWindowAction 1.3.6.1.4.1.207.8.17.17.6.1.14
Storm window action
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

atiAQosClassMapTable 1.3.6.1.4.1.207.8.17.17.7
atiAQosClassMapTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiAQosClassMapEntry

atiAQosClassMapEntry 1.3.6.1.4.1.207.8.17.17.7.1
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiAQosClassMapEntry  

atiAQosClassMapIndex 1.3.6.1.4.1.207.8.17.17.7.1.1
Index into atiAQosClassMapTable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

atiAQosClassMapClassName 1.3.6.1.4.1.207.8.17.17.7.1.2
Class name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

atiAQosClassMapAccessGroupMatch 1.3.6.1.4.1.207.8.17.17.7.1.3
Access group match
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiAQosClassMapCosMatch 1.3.6.1.4.1.207.8.17.17.7.1.4
Cos match
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiAQosClassMapDscpMatch 1.3.6.1.4.1.207.8.17.17.7.1.5
Dscp match
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiAQosClassMapInnerCosMatch 1.3.6.1.4.1.207.8.17.17.7.1.6
Inner cos match
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiAQosClassMapInnerVlanMatch 1.3.6.1.4.1.207.8.17.17.7.1.7
Inner vlan match
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiAQosClassMapIpPrecedenceMatch 1.3.6.1.4.1.207.8.17.17.7.1.8
Ip precedence vlan match
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiAQosClassMapMacTypeMatch 1.3.6.1.4.1.207.8.17.17.7.1.9
Mac type match
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), l2bcast(1), l2mcast(2), l2ucast(3)  

atiAQosClassVlanMatch 1.3.6.1.4.1.207.8.17.17.7.1.10
Vlan match
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiAQosClassTcpFlagsMatch 1.3.6.1.4.1.207.8.17.17.7.1.11
Tcp flags match
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), fin(1), syn(2), rst(3), ack(4), urg(5)  

atiAQosClassL2FormatMatch 1.3.6.1.4.1.207.8.17.17.7.1.12
L2 format match
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiAQosClassL3ProtocolMatch 1.3.6.1.4.1.207.8.17.17.7.1.13
L3 protocol match
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiStkSwDhcpPoolTable 1.3.6.1.4.1.207.8.17.22.1
This table contains a list of Dhcp Pool.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwDhcpPoolEntry

atiStkSwDhcpPoolEntry 1.3.6.1.4.1.207.8.17.22.1.1
This object specifies an entry in 'atiStkSwDhcpPoolTable' that describes a DHCP Pool configured on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwDhcpPoolEntry  

atiDhcpPoolId 1.3.6.1.4.1.207.8.17.22.1.1.1
The Pool ID.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiDhcpPoolName 1.3.6.1.4.1.207.8.17.22.1.1.2
The atiDhcpPoolName indicates Pool Name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiDhcpPoolNetwork 1.3.6.1.4.1.207.8.17.22.1.1.3
Pool Network
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiDhcpPoolNetmask 1.3.6.1.4.1.207.8.17.22.1.1.4
atiDhcpPoolNetmask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiDhcpPoolSubnetmask 1.3.6.1.4.1.207.8.17.22.1.1.5
atiDhcpPoolSubnetmask.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiDhcpPoolRangeList 1.3.6.1.4.1.207.8.17.22.1.1.6
Range list of this pool.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiDhcpPoolExpireTime 1.3.6.1.4.1.207.8.17.22.1.1.7
The total expire time
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

atiDhcpPoolRouterList 1.3.6.1.4.1.207.8.17.22.1.1.8
atiDhcpPoolRouterList
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiDhcpPoolDNSSvrList 1.3.6.1.4.1.207.8.17.22.1.1.9
atiDhcpPoolDNSSvrList
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiDhcpPoolDomainName 1.3.6.1.4.1.207.8.17.22.1.1.10
atiDhcpPoolDomainName
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

atiDhcpPoolIpAdd 1.3.6.1.4.1.207.8.17.22.1.1.11
Ip address to be added to range
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiDhcpPoolIpDelete 1.3.6.1.4.1.207.8.17.22.1.1.12
Ip address to be deleted from range
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiDhcpPoolRouterAdd 1.3.6.1.4.1.207.8.17.22.1.1.13
The router to be added to router list
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiDhcpPoolRouterDelete 1.3.6.1.4.1.207.8.17.22.1.1.14
The router to be deleted from router list
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiDhcpPoolDNSAdd 1.3.6.1.4.1.207.8.17.22.1.1.15
The DNS to be added to DNS list
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiDhcpPoolDNSDelete 1.3.6.1.4.1.207.8.17.22.1.1.16
The DNS to be deleted from DNS list
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

atiStkSwDhcpBindingTable 1.3.6.1.4.1.207.8.17.22.2
This table contains a list of Dhcp Binding configured on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiStkSwDhcpBindingEntry

atiStkSwDhcpBindingEntry 1.3.6.1.4.1.207.8.17.22.2.1
This object specifies an entry in 'atiStkSwDhcpBindingTable' that describes a DHCP Binding configured on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtiStkSwDhcpBindingEntry  

atiDhcpBindingId 1.3.6.1.4.1.207.8.17.22.2.1.1
The atiDhcpBindingId is the Binding Id
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

atiDhcpClientMacAddress 1.3.6.1.4.1.207.8.17.22.2.1.2
The Client Mac Address is the Client Id
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atiDhcpPortNumber 1.3.6.1.4.1.207.8.17.22.2.1.3
The Port Number indicates which port is offering this ip address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiDhcpIpAddress 1.3.6.1.4.1.207.8.17.22.2.1.4
switch offers ip address to client
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

atiDhcpExpireTime 1.3.6.1.4.1.207.8.17.22.2.1.5
The ip is valid within this Expire time.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

atiStkSwDhcpStatisticTable 1.3.6.1.4.1.207.8.17.22.3
OBJECT IDENTIFIER    

atiInDiscover 1.3.6.1.4.1.207.8.17.22.3.1
The atiInDiscover reflects the counter of Dhcp Discover input frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiInDhcpRequest 1.3.6.1.4.1.207.8.17.22.3.2
The atiInDhcpDiscover reflects the counter of Dhcp Request input frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiInDecline 1.3.6.1.4.1.207.8.17.22.3.3
The atiInDecline reflects the counter of Dhcp Decline input frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiInRelease 1.3.6.1.4.1.207.8.17.22.3.4
The atiInRelease reflects the counter of Dhcp Release input frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiInInform 1.3.6.1.4.1.207.8.17.22.3.5
The atiInInform reflects the counter of Dhcp Inform input frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiInBootRequest 1.3.6.1.4.1.207.8.17.22.3.6
The atiInBootRequest reflects the counter of Dhcp Boot Request input frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiInLeaseQuery 1.3.6.1.4.1.207.8.17.22.3.7
The atiInLeaseQuery reflects the counter of Dhcp Lease Query input frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiOutDhcpOffer 1.3.6.1.4.1.207.8.17.22.3.8
The atiOutDhcpOffer reflects the counter of Dhcp Offer Output frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiOutDhcpAck 1.3.6.1.4.1.207.8.17.22.3.9
The atiOutDhcpAck reflects the counter of Dhcp Ack output frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiOutDhcpNak 1.3.6.1.4.1.207.8.17.22.3.10
The atiOutDhcpNak reflects the counter of Dhcp Nak output frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiOutLeaseUnknown 1.3.6.1.4.1.207.8.17.22.3.11
The atiOutLeaseUnknow reflects the counter of Dhcp Lease Unknown output frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiOutLeaseActive 1.3.6.1.4.1.207.8.17.22.3.12
The atiOutLeaseActive reflects the counter of Dhcp Lease Active output frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiOutLeaseUnassigned 1.3.6.1.4.1.207.8.17.22.3.13
The atiOutLeaseUnassigned reflects the counter of Dhcp Lease Unassigned output frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

atiOutBootReply 1.3.6.1.4.1.207.8.17.22.3.14
The atiOutBootReply reflects the counter of Dhcp Boot Reply output frames.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor