AcGateway

File: AcGateway.mib (486329 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1155-SMI
SNMP-FRAMEWORK-MIB AUDIOCODES-TYPES-MIB INET-ADDRESS-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY TAddress
DisplayString DateAndTime TEXTUAL-CONVENTION
RowPointer IpAddress Unsigned32
Integer32 enterprises RowStatus
SnmpAdminString audioCodes acRegistrations
acGeneric acProducts acBoardMibs
InetAddress InetAddressType

Defined Types

ChannelsEntry  
SEQUENCE    
  channelsIndex Unsigned32
  channelsRowStatus RowStatus
  channelsAction INTEGER
  channelsActionResult INTEGER
  channelsTrunkID Unsigned32
  channelsStartingCh Unsigned32
  channelsLastCh Unsigned32
  channelsStartingPhoneNum SnmpAdminString
  channelsTrunkGroupID Unsigned32
  channelsProfileID Unsigned32
  channelsLastTrunkID Unsigned32
  channelsModule Unsigned32

TrunkGroupSettingsEntry  
SEQUENCE    
  trunkGroupSettingsIndex Unsigned32
  trunkGroupSettingsRowStatus RowStatus
  trunkGroupSettingsAction INTEGER
  trunkGroupSettingsActionResult INTEGER
  trunkGroupSettingsTrunkGroupID Unsigned32
  trunkGroupSettingsChannelSelectMode INTEGER
  trunkGroupSettingsRegistrationMode INTEGER
  trunkGroupSettingsGatewayName SnmpAdminString
  trunkGroupSettingsContactUser SnmpAdminString
  trunkGroupSettingsServingIPGroup Integer32
  trunkGroupSettingsMwiInterrogationType INTEGER

Tel2IPRoutingEntry  
SEQUENCE    
  tel2IPRoutingIndex Unsigned32
  tel2IPRoutingRowStatus RowStatus
  tel2IPRoutingAction INTEGER
  tel2IPRoutingActionResult INTEGER
  tel2IPRoutingPrefix SnmpAdminString
  tel2IPRoutingAddress SnmpAdminString
  tel2IPRoutingSrcPrefix SnmpAdminString
  tel2IPRoutingProfileID Integer32
  tel2IPRoutingChargeCode Unsigned32
  tel2IPRoutingDestPort Unsigned32
  tel2IPRoutingSourceIPGroupID Integer32
  tel2IPRoutingDestHostPrefix SnmpAdminString
  tel2IPRoutingDestIPGroupID Integer32
  tel2IPRoutingSourceHostPrefix SnmpAdminString
  tel2IPRoutingTransportType INTEGER
  tel2IPRoutingSourceTrunkGroupID Integer32

IP2TelRoutingEntry  
SEQUENCE    
  iP2TelRoutingIndex Unsigned32
  iP2TelRoutingRowStatus RowStatus
  iP2TelRoutingAction INTEGER
  iP2TelRoutingActionResult INTEGER
  iP2TelRoutingPrefix SnmpAdminString
  iP2TelRoutingTrunkGroupID Unsigned32
  iP2TelRoutingSrcPrefix SnmpAdminString
  iP2TelRoutingAddress SnmpAdminString
  iP2TelRoutingProfileID Unsigned32
  iP2TelRoutingSourceIPGroupID Integer32
  iP2TelRoutingDestHostPrefix SnmpAdminString
  iP2TelRoutingSourceHostPrefix SnmpAdminString

DnsInfoEntry  
SEQUENCE    
  dnsInfoIndex Unsigned32
  dnsInfoRowStatus RowStatus
  dnsInfoAction INTEGER
  dnsInfoActionResult INTEGER
  dnsInfoDomainName SnmpAdminString
  dnsInfoFirstIPAddress SnmpAdminString
  dnsInfoSecondIPAddress SnmpAdminString
  dnsInfoThirdIPAddress SnmpAdminString
  dnsInfoFourthIPAddress SnmpAdminString

SrvInfoEntry  
SEQUENCE    
  srvInfoIndex Unsigned32
  srvInfoRecordNum Unsigned32
  srvInfoRowStatus RowStatus
  srvInfoAction INTEGER
  srvInfoActionResult INTEGER
  srvInfoInternalDomainName SnmpAdminString
  srvInfoTransportType INTEGER
  srvInfoDNSName SnmpAdminString
  srvInfoPriority Unsigned32
  srvInfoWeight Unsigned32
  srvInfoPort Unsigned32
  srvInfoDNSName2 SnmpAdminString
  srvInfoPriority2 Unsigned32
  srvInfoWeight2 Unsigned32
  srvInfoPort2 Unsigned32
  srvInfoDNSName3 SnmpAdminString
  srvInfoPriority3 Unsigned32
  srvInfoWeight3 Unsigned32
  srvInfoPort3 Unsigned32

ForwardOnBusyTrunkDestEntry  
SEQUENCE    
  forwardOnBusyTrunkDestIndex Unsigned32
  forwardOnBusyTrunkDestRowStatus RowStatus
  forwardOnBusyTrunkDestAction INTEGER
  forwardOnBusyTrunkDestActionResult INTEGER
  forwardOnBusyTrunkDestTrunkGroupId Unsigned32
  forwardOnBusyTrunkDestForwardDestination SnmpAdminString

AltRouteCauseIP2TELEntry  
SEQUENCE    
  altRouteCauseIP2TELIndex Unsigned32
  altRouteCauseIP2TELRowStatus RowStatus
  altRouteCauseIP2TELAction INTEGER
  altRouteCauseIP2TELActionResult INTEGER
  altRouteCauseIP2TELReleaseCause Unsigned32

AltRouteCauseTEL2IPEntry  
SEQUENCE    
  altRouteCauseTEL2IPIndex Unsigned32
  altRouteCauseTEL2IPRowStatus RowStatus
  altRouteCauseTEL2IPAction INTEGER
  altRouteCauseTEL2IPActionResult INTEGER
  altRouteCauseTEL2IPReleaseCause Unsigned32

DstIP2TELEntry  
SEQUENCE    
  dstIP2TELIndex Unsigned32
  dstIP2TELRowStatus RowStatus
  dstIP2TELAction INTEGER
  dstIP2TELActionResult INTEGER
  dstIP2TELPrefix SnmpAdminString
  dstIP2TELNumOfStrippedDigits Unsigned32
  dstIP2TELPrefixToAdd SnmpAdminString
  dstIP2TELNumOfDigitsToLeave Unsigned32
  dstIP2TELNumberPlan INTEGER
  dstIP2TELNumberType INTEGER
  dstIP2TELSourcePrefix SnmpAdminString
  dstIP2TELSourceIP SnmpAdminString
  dstIP2TELNumOfDigitsToRemFromRight Unsigned32
  dstIP2TELSuffix2Add SnmpAdminString
  dstIP2TELIsPresentationRestricted Unsigned32

DstTEL2IPEntry  
SEQUENCE    
  dstTEL2IPIndex Unsigned32
  dstTEL2IPRowStatus RowStatus
  dstTEL2IPAction INTEGER
  dstTEL2IPActionResult INTEGER
  dstTEL2IPPrefix SnmpAdminString
  dstTEL2IPNumOfStrippedDigits Unsigned32
  dstTEL2IPPrefixToAdd SnmpAdminString
  dstTEL2IPNumOfDigitsToLeave Unsigned32
  dstTEL2IPNumberPlan INTEGER
  dstTEL2IPNumberType INTEGER
  dstTEL2IPSourcePrefix SnmpAdminString
  dstTEL2IPNumOfDigitsToRemFromRight Unsigned32
  dstTEL2IPSuffix2Add SnmpAdminString
  dstTEL2IPIsPresentationRestricted Unsigned32
  dstTEL2IPSourceIPAddress SnmpAdminString
  dstTEL2IPSourceTrunkGroupID Integer32
  dstTEL2IPSourceIPGroupID Integer32

SrcIP2TELEntry  
SEQUENCE    
  srcIP2TELIndex Unsigned32
  srcIP2TELRowStatus RowStatus
  srcIP2TELAction INTEGER
  srcIP2TELActionResult INTEGER
  srcIP2TELPrefix SnmpAdminString
  srcIP2TELNumOfStrippedDigits Unsigned32
  srcIP2TELPrefixToAdd SnmpAdminString
  srcIP2TELNumOfDigitsToLeave Unsigned32
  srcIP2TELNumberPlan INTEGER
  srcIP2TELNumberType INTEGER
  srcIP2TELDestPrefix SnmpAdminString
  srcIP2TELPresentation INTEGER
  srcIP2TELNumOfDigitsToRemFromRight Unsigned32
  srcIP2TELSuffix2Add SnmpAdminString
  srcIP2TELSourceIPAddress SnmpAdminString

SrcTEL2IPEntry  
SEQUENCE    
  srcTEL2IPIndex Unsigned32
  srcTEL2IPRowStatus RowStatus
  srcTEL2IPAction INTEGER
  srcTEL2IPActionResult INTEGER
  srcTEL2IPPrefix SnmpAdminString
  srcTEL2IPNumOfStrippedDigits Unsigned32
  srcTEL2IPPrefixToAdd SnmpAdminString
  srcTEL2IPNumOfDigitsToLeave Unsigned32
  srcTEL2IPNumberPlan INTEGER
  srcTEL2IPNumberType INTEGER
  srcTEL2IPDestPrefix SnmpAdminString
  srcTEL2IPPresentation INTEGER
  srcTEL2IPNumOfDigitsToRemFromRight Unsigned32
  srcTEL2IPSuffix2Add SnmpAdminString
  srcTEL2IPSourceIPAddress SnmpAdminString
  srcTEL2IPSourceTrunkGroupID Integer32
  srcTEL2IPSourceIPGroupID Integer32

PhoneContextEntry  
SEQUENCE    
  phoneContextIndex Unsigned32
  phoneContextRowStatus RowStatus
  phoneContextAction INTEGER
  phoneContextActionResult INTEGER
  phoneContextNPI INTEGER
  phoneContextTON INTEGER
  phoneContextPhoneContext SnmpAdminString

RedirectNumberMapIp2TelEntry  
SEQUENCE    
  redirectNumberMapIp2TelIndex Unsigned32
  redirectNumberMapIp2TelRowStatus RowStatus
  redirectNumberMapIp2TelAction INTEGER
  redirectNumberMapIp2TelActionResult INTEGER
  redirectNumberMapIp2TelDestinationPrefix SnmpAdminString
  redirectNumberMapIp2TelRedirectPrefix SnmpAdminString
  redirectNumberMapIp2TelSourceAddress SnmpAdminString
  redirectNumberMapIp2TelNumberType INTEGER
  redirectNumberMapIp2TelNumberPlan INTEGER
  redirectNumberMapIp2TelRemoveFromLeft Unsigned32
  redirectNumberMapIp2TelRemoveFromRight Unsigned32
  redirectNumberMapIp2TelLeaveFromRight Unsigned32
  redirectNumberMapIp2TelPrefixToAdd SnmpAdminString
  redirectNumberMapIp2TelSuffixToAdd SnmpAdminString
  redirectNumberMapIp2TelIsPresentationRestricted INTEGER
  redirectNumberMapIp2TelSrcTrunkGroupID Integer32
  redirectNumberMapIp2TelSrcIPGroupID Integer32

RedirectNumberMapTel2IpEntry  
SEQUENCE    
  redirectNumberMapTel2IpIndex Unsigned32
  redirectNumberMapTel2IpRowStatus RowStatus
  redirectNumberMapTel2IpAction INTEGER
  redirectNumberMapTel2IpActionResult INTEGER
  redirectNumberMapTel2IpDestinationPrefix SnmpAdminString
  redirectNumberMapTel2IpRedirectPrefix SnmpAdminString
  redirectNumberMapTel2IpSourceAddress SnmpAdminString
  redirectNumberMapTel2IpNumberType Unsigned32
  redirectNumberMapTel2IpNumberPlan Unsigned32
  redirectNumberMapTel2IpRemoveFromLeft Unsigned32
  redirectNumberMapTel2IpRemoveFromRight Unsigned32
  redirectNumberMapTel2IpLeaveFromRight Unsigned32
  redirectNumberMapTel2IpPrefixToAdd SnmpAdminString
  redirectNumberMapTel2IpSuffixToAdd SnmpAdminString
  redirectNumberMapTel2IpIsPresentationRestricted INTEGER
  redirectNumberMapTel2IpSrcTrunkGroupID Integer32
  redirectNumberMapTel2IpSrcIPGroupID Integer32

ISDNRxOverlapEntry  
SEQUENCE    
  iSDNRxOverlapIndex Unsigned32
  iSDNRxOverlapEnable INTEGER

TrunkTransferEntry  
SEQUENCE    
  trunkTransferIndex Unsigned32
  trunkTransferMode INTEGER

ProgressIndicatorToISDNEntry  
SEQUENCE    
  progressIndicatorToISDNIndex Unsigned32
  progressIndicatorToISDNValue INTEGER

PlayRBToneToTrunkEntry  
SEQUENCE    
  playRBToneToTrunkIndex Unsigned32
  playRBToneToTrunkValue INTEGER

ISDNTransferCapabilityEntry  
SEQUENCE    
  iSDNTransferCapabilityIndex Unsigned32
  iSDNTransferCapabilityValue INTEGER

LocalISDNRBSourceEntry  
SEQUENCE    
  localISDNRBSourceIndex Unsigned32
  localISDNRBSourceValue INTEGER

PIForDisconnectMsgEntry  
SEQUENCE    
  pIForDisconnectMsgIndex Unsigned32
  pIForDisconnectMsgValue Integer32

PSTNAlertTimeoutEntry  
SEQUENCE    
  pSTNAlertTimeoutIndex Unsigned32
  pSTNAlertTimeoutValue Integer32

EnableCallWaitingPerPortEntry  
SEQUENCE    
  enableCallWaitingPerPortIndex Unsigned32
  enableCallWaitingPerPortIsUsed INTEGER
  enableCallWaitingPerPortModule Unsigned32
  enableCallWaitingPerPortPort Unsigned32
  enableCallWaitingPerPortAction INTEGER
  enableCallWaitingPerPortActionResult INTEGER
  enableCallWaitingPerPortEnable INTEGER

ChargeCodesEntry  
SEQUENCE    
  chargeCodesIndex Unsigned32
  chargeCodesRowStatus RowStatus
  chargeCodesAction INTEGER
  chargeCodesActionResult INTEGER
  chargeCodesPeriod1EndTime Unsigned32
  chargeCodesPeriod1PulseInterval Unsigned32
  chargeCodesPeriod1PulsesOnAnswer Unsigned32
  chargeCodesPeriod2EndTime Unsigned32
  chargeCodesPeriod2PulseInterval Unsigned32
  chargeCodesPeriod2PulsesOnAnswer Unsigned32
  chargeCodesPeriod3EndTime Unsigned32
  chargeCodesPeriod3PulseInterval Unsigned32
  chargeCodesPeriod3PulsesOnAnswer Unsigned32
  chargeCodesPeriod4EndTime Unsigned32
  chargeCodesPeriod4PulseInterval Unsigned32
  chargeCodesPeriod4PulsesOnAnswer Unsigned32

ToneIndexEntry  
SEQUENCE    
  toneIndexIndex Unsigned32
  toneIndexRowStatus RowStatus
  toneIndexAction INTEGER
  toneIndexActionResult INTEGER
  toneIndexFXSPortFirst Unsigned32
  toneIndexFXSPortLast Unsigned32
  toneIndexSourcePrefix SnmpAdminString
  toneIndexPriorityIndex Unsigned32

AutoDialEntry  
SEQUENCE    
  autoDialIndex Unsigned32
  autoDialIsUsed INTEGER
  autoDialAction INTEGER
  autoDialActionResult INTEGER
  autoDialDestPhoneNumber SnmpAdminString
  autoDialType INTEGER
  autoDialModule Unsigned32
  autoDialPort Unsigned32

CallerDisplayEntry  
SEQUENCE    
  callerDisplayIndex Unsigned32
  callerDisplayIsUsed INTEGER
  callerDisplayAction INTEGER
  callerDisplayActionResult INTEGER
  callerDisplayCallerDisplay SnmpAdminString
  callerDisplayRestriction INTEGER
  callerDisplayModule Unsigned32
  callerDisplayPort Unsigned32

CallerIDperPortEntry  
SEQUENCE    
  callerIDperPortIndex Unsigned32
  callerIDperPortIsUsed INTEGER
  callerIDperPortAction INTEGER
  callerIDperPortActionResult INTEGER
  callerIDperPortEnable INTEGER
  callerIDperPortModule Unsigned32
  callerIDperPortPort Unsigned32

NamesEntry  
SEQUENCE    
  namesIndex Unsigned32
  namesIsUsed INTEGER
  namesAction INTEGER
  namesActionResult INTEGER
  namesPortName SnmpAdminString
  namesModule Unsigned32
  namesPort Unsigned32

EnableDidPortEntry  
SEQUENCE    
  enableDidPortIndex Unsigned32
  enableDidPortIsUsed INTEGER
  enableDidPortAction INTEGER
  enableDidPortActionResult INTEGER
  enableDidPortEnable INTEGER
  enableDidPortModule Unsigned32
  enableDidPortPort Unsigned32

AcTWCnonAllocateablePortsEntry  
SEQUENCE    
  acTWCnonAllocateablePortsIndex Unsigned32
  acTWCnonAllocateablePortsNumber Unsigned32

CodersEntry  
SEQUENCE    
  codersIndex Unsigned32
  codersRowStatus RowStatus
  codersAction INTEGER
  codersActionResult INTEGER
  codersName INTEGER
  codersInterval Unsigned32
  codersRate Unsigned32
  codersPayloadType Unsigned32
  codersSilenceSuppression INTEGER

CodersGroup0Entry  
SEQUENCE    
  codersGroup0Index Unsigned32
  codersGroup0RowStatus RowStatus
  codersGroup0Action INTEGER
  codersGroup0ActionRes INTEGER
  codersGroup0Name INTEGER
  codersGroup0PacketizationTime Unsigned32
  codersGroup0Rate Unsigned32
  codersGroup0PayloadType Integer32
  codersGroup0SilenceSuppression INTEGER

CodersGroup1Entry  
SEQUENCE    
  codersGroup1Index Unsigned32
  codersGroup1RowStatus RowStatus
  codersGroup1Action INTEGER
  codersGroup1ActionRes INTEGER
  codersGroup1Name INTEGER
  codersGroup1PacketizationTime Unsigned32
  codersGroup1Rate Unsigned32
  codersGroup1PayloadType Unsigned32
  codersGroup1SilenceSuppression INTEGER

CodersGroup2Entry  
SEQUENCE    
  codersGroup2Index Unsigned32
  codersGroup2RowStatus RowStatus
  codersGroup2Action INTEGER
  codersGroup2ActionRes INTEGER
  codersGroup2Name INTEGER
  codersGroup2PacketizationTime Unsigned32
  codersGroup2Rate Unsigned32
  codersGroup2PayloadType Integer32
  codersGroup2SilenceSuppression INTEGER

CodersGroup3Entry  
SEQUENCE    
  codersGroup3Index Unsigned32
  codersGroup3RowStatus RowStatus
  codersGroup3Action INTEGER
  codersGroup3ActionRes INTEGER
  codersGroup3Name INTEGER
  codersGroup3PacketizationTime Unsigned32
  codersGroup3Rate Unsigned32
  codersGroup3PayloadType Integer32
  codersGroup3SilenceSuppression INTEGER

CodersGroup4Entry  
SEQUENCE    
  codersGroup4Index Unsigned32
  codersGroup4RowStatus RowStatus
  codersGroup4Action INTEGER
  codersGroup4ActionRes INTEGER
  codersGroup4Name INTEGER
  codersGroup4PacketizationTime Unsigned32
  codersGroup4Rate Unsigned32
  codersGroup4PayloadType Integer32
  codersGroup4SilenceSuppression INTEGER

ForwardEntry  
SEQUENCE    
  forwardIndex Unsigned32
  forwardIsUsed INTEGER
  forwardAction INTEGER
  forwardActionResult INTEGER
  forwardForwardType INTEGER
  forwardForwardedToNumber SnmpAdminString
  forwardTimeForNoReply Unsigned32
  forwardModule Unsigned32
  forwardPort Unsigned32

IPProfileEntry  
SEQUENCE    
  iPProfileIndex Unsigned32
  iPProfileRowStatus RowStatus
  iPProfileAction INTEGER
  iPProfileActionResult INTEGER
  iPProfilePreference Unsigned32
  iPProfileProfileName SnmpAdminString
  iPProfileCodersGroupID Unsigned32
  iPProfileFaxTransportMode Unsigned32
  iPProfileIsFaxUsed INTEGER
  iPProfileDJBufMinDelay Unsigned32
  iPProfileDJBufOptFactor Unsigned32
  iPProfileIPDiffServ Unsigned32
  iPProfileSigIPDiffServ Unsigned32
  iPProfileSCE INTEGER
  iPProfileRTPRedundancyDepth Unsigned32
  iPProfileRemoteBaseUDPPort Unsigned32
  iPProfileCngDetectorMode INTEGER
  iPProfileVxxModemTransportType INTEGER
  iPProfileNSEMode INTEGER
  iPProfilePlayRingbackToneToIP INTEGER
  iPProfileEnableEarlyMedia INTEGER
  iPProfileProgressIndicatorToIP INTEGER
  iPProfileECE INTEGER
  iPProfileMediaSecurityBehavior INTEGER
  iPProfileCallLimit Integer32
  iPProfileDisconnectOnBrokenConnection INTEGER
  iPProfileCopyDest2RedirectNumber INTEGER
  iPProfileAddIEInSetup SnmpAdminString
  iPProfileRxDTMFOption INTEGER
  iPProfileFirstTxDtmfOption INTEGER
  iPProfileSecondTxDtmfOption INTEGER
  iPProfileMediaIPVersionPreference INTEGER
  iPProfileSBCAllowedCodersGroupID INTEGER
  iPProfileSBCAllowedCodersMode INTEGER
  iPProfileSBCMediaSecurityBehaviour INTEGER

TelProfileEntry  
SEQUENCE    
  telProfileIndex Unsigned32
  telProfileRowStatus RowStatus
  telProfileAction INTEGER
  telProfileActionResult INTEGER
  telProfilePreference Unsigned32
  telProfileProfileName SnmpAdminString
  telProfileCodersGroupID Unsigned32
  telProfileFaxTransportMode Unsigned32
  telProfileIsFaxUsed INTEGER
  telProfileDJBufMinDelay Unsigned32
  telProfileDJBufOptFactor Unsigned32
  telProfileIPDiffServ Unsigned32
  telProfileSigIPDiffServ Unsigned32
  telProfileVoiceVolume Integer32
  telProfileDTMFVolume Integer32
  telProfileInputGain Integer32
  telProfileEnableReversalPolarity INTEGER
  telProfileEnableCurrentDisconnect INTEGER
  telProfileEnableDigitDelivery INTEGER
  telProfileECE INTEGER
  telProfileMWIanalogLamp INTEGER
  telProfileMWIDisplay INTEGER
  telProfileMaxFlashHookDetectionPeriod Unsigned32
  telProfileEnableEarlyMedia INTEGER
  telProfileProgressIndicatorToIP INTEGER
  telProfileTimeForReorderTone Unsigned32
  telProfileEnableDIDWink INTEGER
  telProfileIsTwoStageDial INTEGER
  telProfileDisconnectOnBusyTone INTEGER
  telProfileEnableVoiceMailDelay INTEGER
  telProfileDialPlanIndex Integer32
  telProfileEnable911PSAP INTEGER
  telProfileSwapTelToIpPhoneNumbers INTEGER
  telProfileEnableAGC INTEGER
  telProfileECNlpMode INTEGER

RtpOnlyModeForTrunkEntry  
SEQUENCE    
  rtpOnlyModeForTrunkIndex Unsigned32
  rtpOnlyModeForTrunkRtpOnlyModeForTrunk INTEGER

AcBChannelNegotiationForTrunkEntry  
SEQUENCE    
  acBChannelNegotiationForTrunkIndex Unsigned32
  acBChannelNegotiationForTrunkMode INTEGER

AcDigitalOOSBehaviorForTrunkEntry  
SEQUENCE    
  acDigitalOOSBehaviorForTrunkIndex Unsigned32
  acDigitalOOSBehaviorForTrunkValue INTEGER

AcRemoveCallingNameForTrunkEntry  
SEQUENCE    
  acRemoveCallingNameForTrunkIndex Unsigned32
  acRemoveCallingNameForTrunkMode INTEGER

AcEmergencyNumbersEntry  
SEQUENCE    
  acEmergencyNumbersIndex Unsigned32
  acEmergencyNumbersNumbers SnmpAdminString

AccountEntry  
SEQUENCE    
  accountIndex Unsigned32
  accountRowStatus RowStatus
  accountAction INTEGER
  accountActionResult INTEGER
  accountServedTrunkGroup Integer32
  accountServedIPGroup Integer32
  accountServingIPGroup Integer32
  accountUsername SnmpAdminString
  accountPassword SnmpAdminString
  accountHostName SnmpAdminString
  accountRegister INTEGER
  accountContactUser SnmpAdminString

IpGroupEntry  
SEQUENCE    
  ipGroupIndex Unsigned32
  ipGroupRowStatus RowStatus
  ipGroupAction INTEGER
  ipGroupActionResult INTEGER
  ipGroupType INTEGER
  ipGroupDescription SnmpAdminString
  ipGroupProxySetId Integer32
  ipGroupSIPGroupName SnmpAdminString
  ipGroupContactUser SnmpAdminString
  ipGroupEnableSurvivability INTEGER
  ipGroupServingIPGroup Integer32
  ipGroupSipReRoutingMode INTEGER
  ipGroupAlwaysUseRouteTable INTEGER
  ipGroupRoutingMode INTEGER
  ipGroupProfileId Unsigned32
  ipGroupMediaRealm SnmpAdminString
  ipGroupMaxNumOfRegUsers Integer32

SbcClassificationEntry  
SEQUENCE    
  sbcClassificationIndex Unsigned32
  sbcClassificationRowStatus RowStatus
  sbcClassificationAction INTEGER
  sbcClassificationActionResult INTEGER
  sbcClassificationSrcIPGroupId Integer32
  sbcClassificationSrcSRDId Integer32
  sbcClassificationSrcAddress SnmpAdminString
  sbcClassificationSrcUsernamePrefix SnmpAdminString
  sbcClassificationSrcHost SnmpAdminString
  sbcClassificationDestUsernamePrefix SnmpAdminString
  sbcClassificationDestHost SnmpAdminString

SbcRoutingEntry  
SEQUENCE    
  sbcRoutingIndex Unsigned32
  sbcRoutingRowStatus RowStatus
  sbcRoutingAction INTEGER
  sbcRoutingActionResult INTEGER
  sbcRoutingSrcIPGroupId Integer32
  sbcRoutingSrcUsernamePrefix SnmpAdminString
  sbcRoutingSrcHost SnmpAdminString
  sbcRoutingDestUsernamePrefix SnmpAdminString
  sbcRoutingDestHost SnmpAdminString
  sbcRoutingDestType INTEGER
  sbcRoutingDestIPGroupId Integer32
  sbcRoutingDestSRDId Integer32
  sbcRoutingDestAddress SnmpAdminString
  sbcRoutingDestPort Unsigned32
  sbcRoutingDestTransportType INTEGER
  sbcRoutingAltRouteOptions INTEGER
  sbcRoutingRequestType INTEGER

SbcIP2IPInboundManipulationEntry  
SEQUENCE    
  sbcIP2IPInboundManipulationIndex Unsigned32
  sbcIP2IPInboundManipulationRowStatus RowStatus
  sbcIP2IPInboundManipulationAction INTEGER
  sbcIP2IPInboundManipulationActionResult INTEGER
  sbcIP2IPInboundManipulationIsAdditionalManipulation INTEGER
  sbcIP2IPInboundManipulationManipulatedURI INTEGER
  sbcIP2IPInboundManipulationSrcIPGroupID Integer32
  sbcIP2IPInboundManipulationSrcUsernamePrefix SnmpAdminString
  sbcIP2IPInboundManipulationSrcHost SnmpAdminString
  sbcIP2IPInboundManipulationDestUsernamePrefix SnmpAdminString
  sbcIP2IPInboundManipulationDestHost SnmpAdminString
  sbcIP2IPInboundManipulationRemoveFromLeft Unsigned32
  sbcIP2IPInboundManipulationRemoveFromRight Unsigned32
  sbcIP2IPInboundManipulationLeaveFromRight Unsigned32
  sbcIP2IPInboundManipulationPrefix2Add SnmpAdminString
  sbcIP2IPInboundManipulationSuffix2Add SnmpAdminString
  sbcIP2IPInboundManipulationRequestType INTEGER

SbcIP2IPOutboundManipulationEntry  
SEQUENCE    
  sbcIP2IPOutboundManipulationIndex Unsigned32
  sbcIP2IPOutboundManipulationRowStatus RowStatus
  sbcIP2IPOutboundManipulationAction INTEGER
  sbcIP2IPOutboundManipulationActionResult INTEGER
  sbcIP2IPOutboundManipulationIsAdditionalManipulation INTEGER
  sbcIP2IPOutboundManipulationManipulatedURI INTEGER
  sbcIP2IPOutboundManipulationSrcIPGroupID Integer32
  sbcIP2IPOutboundManipulationDestIPGroupID Integer32
  sbcIP2IPOutboundManipulationSrcUsernamePrefix SnmpAdminString
  sbcIP2IPOutboundManipulationSrcHost SnmpAdminString
  sbcIP2IPOutboundManipulationDestUsernamePrefix SnmpAdminString
  sbcIP2IPOutboundManipulationDestHost SnmpAdminString
  sbcIP2IPOutboundManipulationRemoveFromLeft Unsigned32
  sbcIP2IPOutboundManipulationRemoveFromRight Unsigned32
  sbcIP2IPOutboundManipulationLeaveFromRight Unsigned32
  sbcIP2IPOutboundManipulationPrefix2Add SnmpAdminString
  sbcIP2IPOutboundManipulationSuffix2Add SnmpAdminString
  sbcIP2IPOutboundManipulationRequestType INTEGER

SbcAdmissionControlEntry  
SEQUENCE    
  sbcAdmissionControlIndex Unsigned32
  sbcAdmissionControlRowStatus RowStatus
  sbcAdmissionControlAction INTEGER
  sbcAdmissionControlActionResult INTEGER
  sbcAdmissionControlLimitType INTEGER
  sbcAdmissionControlIpGroupID Integer32
  sbcAdmissionControlSrdID Integer32
  sbcAdmissionControlRequestType INTEGER
  sbcAdmissionControlRequestDirection INTEGER
  sbcAdmissionControlLimit Integer32
  sbcAdmissionControlLimitPerUser Integer32

SbcMessageManipulationsEntry  
SEQUENCE    
  sbcMessageManipulationsIndex Unsigned32
  sbcMessageManipulationsRowStatus RowStatus
  sbcMessageManipulationsAction INTEGER
  sbcMessageManipulationsActionResult INTEGER
  sbcMessageManipulationsManipulationSetID Unsigned32
  sbcMessageManipulationsMessageType SnmpAdminString
  sbcMessageManipulationsCondition SnmpAdminString
  sbcMessageManipulationsActionSubject SnmpAdminString
  sbcMessageManipulationsActionType INTEGER
  sbcMessageManipulationsActionValue SnmpAdminString
  sbcMessageManipulationsRowRole INTEGER

SbcAlternativeRoutingReasonsEntry  
SEQUENCE    
  sbcAlternativeRoutingReasonsIndex Unsigned32
  sbcAlternativeRoutingReasonsRowStatus RowStatus
  sbcAlternativeRoutingReasonsAction INTEGER
  sbcAlternativeRoutingReasonsActionResult INTEGER
  sbcAlternativeRoutingReasonsReleaseCause Unsigned32

SrdEntry  
SEQUENCE    
  srdIndex Unsigned32
  srdRowStatus RowStatus
  srdAction INTEGER
  srdActionResult INTEGER
  srdName SnmpAdminString
  srdMediaRealm SnmpAdminString
  srdIntraSRDMediaAnchoring INTEGER
  srdBlockUnRegUsers INTEGER
  srdMaxNumOfRegUsers Integer32

SipInterfaceEntry  
SEQUENCE    
  sipInterfaceIndex Unsigned32
  sipInterfaceRowStatus RowStatus
  sipInterfaceAction INTEGER
  sipInterfaceActionResult INTEGER
  sipInterfaceNetworkInterface SnmpAdminString
  sipInterfaceApplicationType INTEGER
  sipInterfaceUDPPort Unsigned32
  sipInterfaceTCPPort Unsigned32
  sipInterfaceTLSPort Unsigned32
  sipInterfaceSRD Unsigned32

ProxyIPEntry  
SEQUENCE    
  proxyIPIndex Unsigned32
  proxyIPRowStatus RowStatus
  proxyIPAction INTEGER
  proxyIPActionResult INTEGER
  proxyIPProxyIP SnmpAdminString

SipProxySetEntry  
SEQUENCE    
  sipProxySetIndex Unsigned32
  sipProxySetRowStatus RowStatus
  sipProxySetAction INTEGER
  sipProxySetActionResult INTEGER
  sipProxySetEnableProxyKeepAlive INTEGER
  sipProxySetProxyKeepAliveTime Unsigned32
  sipProxySetProxyLoadBalancingMethod INTEGER
  sipProxySetIsProxyHotSwap INTEGER

SipTxDTMFOptionEntry  
SEQUENCE    
  sipTxDTMFOptionIndex Unsigned32
  sipTxDTMFOptionRowStatus RowStatus
  sipTxDTMFOptionAction INTEGER
  sipTxDTMFOptionActionResult INTEGER
  sipTxDTMFOptionValue INTEGER

AuthEntry  
SEQUENCE    
  authIndex Unsigned32
  authIsUsed INTEGER
  authAction INTEGER
  authActionResult INTEGER
  authUserID SnmpAdminString
  authUserPassword SnmpAdminString
  authModule Unsigned32
  authPort Unsigned32

CauseMapSIP2ISDNEntry  
SEQUENCE    
  causeMapSIP2ISDNIndex Unsigned32
  causeMapSIP2ISDNRowStatus RowStatus
  causeMapSIP2ISDNAction INTEGER
  causeMapSIP2ISDNActionResult INTEGER
  causeMapSIP2ISDNSIPResponse Integer32
  causeMapSIP2ISDNQ850Cause Integer32

CauseMapISDN2SIPEntry  
SEQUENCE    
  causeMapISDN2SIPIndex Unsigned32
  causeMapISDN2SIPRowStatus RowStatus
  causeMapISDN2SIPAction INTEGER
  causeMapISDN2SIPActionResult INTEGER
  causeMapISDN2SIPQ850Cause Integer32
  causeMapISDN2SIPSIPResponse Integer32

SasRegistrationManipulationEntry  
SEQUENCE    
  sasRegistrationManipulationIndex Unsigned32
  sasRegistrationManipulationRowStatus RowStatus
  sasRegistrationManipulationAction INTEGER
  sasRegistrationManipulationActionResult INTEGER
  sasRegistrationManipulationRemoveFromRight Unsigned32
  sasRegistrationManipulationLeaveFromRight Unsigned32

GkIPEntry  
SEQUENCE    
  gkIPIndex Unsigned32
  gkIPRowStatus RowStatus
  gkIPAction INTEGER
  gkIPActionResult INTEGER
  gkIPGatekeeperIP SnmpAdminString
  gkIPGateleeperID SnmpAdminString

RegisterPrefixEntry  
SEQUENCE    
  registerPrefixIndex Unsigned32
  registerPrefixRowStatus RowStatus
  registerPrefixAction INTEGER
  registerPrefixActionResult INTEGER
  registerPrefixPrefix SnmpAdminString
  registerPrefixNumberPlan INTEGER
  registerPrefixNumberType INTEGER

DTMFOptionsEntry  
SEQUENCE    
  dTMFOptionsIndex Unsigned32
  dTMFOptionsRowStatus RowStatus
  dTMFOptionsAction INTEGER
  dTMFOptionsActionResult INTEGER
  dTMFOptionsTxDTMFOption INTEGER

Defined Values

acGateway 9.1.5003.9.10.3
Tok_String
MODULE-IDENTITY    

gwConfiguration 9.1.5003.9.10.3.1
OBJECT IDENTIFIER    

common 9.1.5003.9.10.3.1.1
OBJECT IDENTIFIER    

channelsSetting 9.1.5003.9.10.3.1.1.1
OBJECT IDENTIFIER    

channelsSettingSelectMode 9.1.5003.9.10.3.1.1.1.1
Default method to use for trunk B-channel allocation (IP to Tel calls). Access: Instant. AC INI-Param: CHANNELSELECTMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER byDestPhoneNumber(0), cyclicAscending(1), ascendingAlways(2), cyclicDescending(3), descendingAlways(4), byDestinationPhoneNumberCyclicAscending(5), bySourcePhoneNumber(6), trunkCyclicAscending(7)  

channelsTable 9.1.5003.9.10.3.1.1.1.21
The table defines trunk/hunt groups and phone numbers for gateway endpoints. The endpoints that aren't defined will be disabled.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ChannelsEntry

channelsEntry 9.1.5003.9.10.3.1.1.1.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ChannelsEntry  

channelsIndex 9.1.5003.9.10.3.1.1.1.21.1.1
Channel numbers, starting at 0. AC INI-Param: TrunkGroup_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..100  

channelsRowStatus 9.1.5003.9.10.3.1.1.1.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

channelsAction 9.1.5003.9.10.3.1.1.1.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

channelsActionResult 9.1.5003.9.10.3.1.1.1.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

channelsTrunkID 9.1.5003.9.10.3.1.1.1.21.1.5
Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroup_FirstTrunkId
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

channelsStartingCh 9.1.5003.9.10.3.1.1.1.21.1.6
Starting Channel for this trunk/hunt group. Access: Instant. AC INI-Param: TrunkGroup_FirstBChannel
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..2016  

channelsLastCh 9.1.5003.9.10.3.1.1.1.21.1.7
Last Channel for the trunk/hunt group. Access: Instant. AC INI-Param: TrunkGroup_LastBChannel
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..2016  

channelsStartingPhoneNum 9.1.5003.9.10.3.1.1.1.21.1.8
Starting Phone Number. Access: Instant. AC INI-Param: TrunkGroup_FirstPhoneNumber
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..25)  

channelsTrunkGroupID 9.1.5003.9.10.3.1.1.1.21.1.9
Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroup_TrunkGroupNum
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

channelsProfileID 9.1.5003.9.10.3.1.1.1.21.1.10
Profile ID. Access: Instant. AC INI-Param: TrunkGroup_ProfileId
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..9  

channelsLastTrunkID 9.1.5003.9.10.3.1.1.1.21.1.11
Last Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroup_LastTrunkId
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

channelsModule 9.1.5003.9.10.3.1.1.1.21.1.12
Channels Module. Access: Instant. AC INI-Param: TrunkGroup_Module
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

trunkGroupSettingsTable 9.1.5003.9.10.3.1.1.1.22
The table defines trunk/hunt groups configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrunkGroupSettingsEntry

trunkGroupSettingsEntry 9.1.5003.9.10.3.1.1.1.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TrunkGroupSettingsEntry  

trunkGroupSettingsIndex 9.1.5003.9.10.3.1.1.1.22.1.1
Trunk numbers, starting at 0. AC INI-Param: TrunkGroupSettings_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..100  

trunkGroupSettingsRowStatus 9.1.5003.9.10.3.1.1.1.22.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

trunkGroupSettingsAction 9.1.5003.9.10.3.1.1.1.22.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

trunkGroupSettingsActionResult 9.1.5003.9.10.3.1.1.1.22.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

trunkGroupSettingsTrunkGroupID 9.1.5003.9.10.3.1.1.1.22.1.5
Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroupSettings_TrunkGroupId
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

trunkGroupSettingsChannelSelectMode 9.1.5003.9.10.3.1.1.1.22.1.6
Selects the next available (free) Gateway port, FXO/PSTN: affects outgoing calls chanel selection FXS:affects incoming call channel selection. Access: Instant. AC INI-Param: TrunkGroupSettings_ChannelSelectMode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER byPhoneNumber(0), cyclicAscending(1), ascendingAlways(2), cyclicDescending(3), descendingAlways(4), byPhoneNumberCyclicAscending(5), bySourcePhoneNumber(6), trunkCyclicAscending(7), trunkAndChannelCyclicAscending(8), valueNotSet(255)  

trunkGroupSettingsRegistrationMode 9.1.5003.9.10.3.1.1.1.22.1.7
Access: Instant. AC INI-Param: TrunkGroupSettings_RegistrationMode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER perEndpoint(0), perGateway(1), notApplicable(2), doNotRegister(4), perAccount(5), valueNotSet(255)  

trunkGroupSettingsGatewayName 9.1.5003.9.10.3.1.1.1.22.1.8
Access: Instant. AC INI-Param: TrunkGroupSettings_GatewayName
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

trunkGroupSettingsContactUser 9.1.5003.9.10.3.1.1.1.22.1.9
Access: Instant. AC INI-Param: TrunkGroupSettings_ContactUser
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

trunkGroupSettingsServingIPGroup 9.1.5003.9.10.3.1.1.1.22.1.10
Access: Instant. AC INI-Param: TrunkGroupSettings_ServingIPGroup
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

trunkGroupSettingsMwiInterrogationType 9.1.5003.9.10.3.1.1.1.22.1.11
Access: Instant. AC INI-Param: TrunkGroupSettings_MWIInterrogationType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), useActivateOnly(1), resultNotUsed(2), useResult(3), notConfigured(255)  

manipulationAndRouting 9.1.5003.9.10.3.1.1.2
OBJECT IDENTIFIER    

manipulationAndRoutingModeTel2Ip 9.1.5003.9.10.3.1.1.2.1
Defines order between routing incoming calls from Tel side and performing manipulations. Access: Instant. AC INI-Param: ROUTEMODETEL2IP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER routeBeforeMap(0), routeAfterMap(1)  

manipulationAndRoutingModeIp2Tel 9.1.5003.9.10.3.1.1.2.2
Defines order between routing incoming calls from IP side and performing manipulations. Access: Instant. AC INI-Param: ROUTEMODEIP2TEL
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER routeBeforeMap(0), routeAfterMap(1)  

manipulationAndRoutingFilterCalls2Ip 9.1.5003.9.10.3.1.1.2.3
When Gatekeeper/Proxy is enabled, do not start session if called number is not listed or restricted in Tel to IP routing table. Access: Instant. AC INI-Param: FILTERCALLS2IP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

manipulationAndRoutingAltRoutingTel2IpEnable 9.1.5003.9.10.3.1.1.2.4
Enable Tel to IP Alternative Routing. Can be enabled for status only without affecting routing. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPENABLE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1), statusOnly(2)  

manipulationAndRoutingAltRoutingTel2IpMode 9.1.5003.9.10.3.1.1.2.5
Methods used for Alternative Routing operation. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), conn(1), qos(2), both(3)  

manipulationAndRoutingAltRoutingTel2IpQosAllowTheNCall 9.1.5003.9.10.3.1.1.2.6
in case of QOS problem, a call has this probability (in percents) to continue, in order to reevaluate the QOS. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPQOSALLOWPROB
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

manipulationAndRoutingPreferRouteTable 9.1.5003.9.10.3.1.1.2.7
Prefer Routing Table. Access: Instant. AC INI-Param: PREFERROUTETABLE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

manipulationAndRoutingRedundantRoutingMode 9.1.5003.9.10.3.1.1.2.8
Mode of redundant routing. 0 - Disabled, 1 - Use routing table, 2 - Use proxies list. Access: Instant. AC INI-Param: REDUNDANTROUTINGMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), routingTable(1), proxy(2)  

manipulationAndRoutingAltRoutingTel2IpConnMethod 9.1.5003.9.10.3.1.1.2.9
Tel to IP Alternative Routing Connectivity Method. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPCONNMETHOD
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ping(0), options(1)  

manipulationAndRoutingSIPReRoutingMode 9.1.5003.9.10.3.1.1.2.10
Defines the routing mode after receiving 3xx response or transfer 0 - standard mode 1 - send invite to proxy 2 - use routing table. Access: Instant. AC INI-Param: SIPREROUTINGMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER standardMode(0), sendInviteToProxy(1), useRoutingTable(2)  

manipulationAndRoutingAltRoutingToneDuration 9.1.5003.9.10.3.1.1.2.11
Alternative Routing Tone Duration. 0 - disabled (milliseconds). Access: Instant. AC INI-Param: ALTROUTINGTONEDURATION
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..20000  

manipulationAndRoutingAltRoutingTel2IpKeepAliveTime 9.1.5003.9.10.3.1.1.2.12
Time interval between OPTIONS Keep-Alive messages for IP connectivity (seconds). Access: Instant. AC INI-Param: ALTROUTINGTEL2IPKEEPALIVETIME
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..2000000  

routing 9.1.5003.9.10.3.1.1.2.20
OBJECT IDENTIFIER    

tel2IPRoutingTable 9.1.5003.9.10.3.1.1.2.20.1
Phone prefix to IP address routing table. The table is used for routing incoming PSTN to IP calls, if Gatekeeper is not used.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Tel2IPRoutingEntry

tel2IPRoutingEntry 9.1.5003.9.10.3.1.1.2.20.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Tel2IPRoutingEntry  

tel2IPRoutingIndex 9.1.5003.9.10.3.1.1.2.20.1.1.1
Entry number, starting at 0. AC INI-Param: PREFIX_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..199  

tel2IPRoutingRowStatus 9.1.5003.9.10.3.1.1.2.20.1.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tel2IPRoutingAction 9.1.5003.9.10.3.1.1.2.20.1.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

tel2IPRoutingActionResult 9.1.5003.9.10.3.1.1.2.20.1.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

tel2IPRoutingPrefix 9.1.5003.9.10.3.1.1.2.20.1.1.5
Phone number prefix. up to 50 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PREFIX_DestinationPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

tel2IPRoutingAddress 9.1.5003.9.10.3.1.1.2.20.1.1.6
Address (IP or DNS name). Access: Instant. AC INI-Param: PREFIX_DestAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..69)  

tel2IPRoutingSrcPrefix 9.1.5003.9.10.3.1.1.2.20.1.1.7
Calling Phone number prefix. up to 50 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PREFIX_SourcePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

tel2IPRoutingProfileID 9.1.5003.9.10.3.1.1.2.20.1.1.8
Profile ID. Access: Instant. AC INI-Param: PREFIX_ProfileId
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

tel2IPRoutingChargeCode 9.1.5003.9.10.3.1.1.2.20.1.1.9
Charge code to use for generating metering tones. Access: Instant. AC INI-Param: PREFIX_MeteringCode
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

tel2IPRoutingDestPort 9.1.5003.9.10.3.1.1.2.20.1.1.10
Destination port. Access: Instant. AC INI-Param: PREFIX_DestPort
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65534  

tel2IPRoutingSourceIPGroupID 9.1.5003.9.10.3.1.1.2.20.1.1.11
Access: Instant. AC INI-Param: PREFIX_SrcIPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

tel2IPRoutingDestHostPrefix 9.1.5003.9.10.3.1.1.2.20.1.1.12
Access: Instant. AC INI-Param: PREFIX_DestHostPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

tel2IPRoutingDestIPGroupID 9.1.5003.9.10.3.1.1.2.20.1.1.13
Access: Instant. AC INI-Param: PREFIX_DestIPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

tel2IPRoutingSourceHostPrefix 9.1.5003.9.10.3.1.1.2.20.1.1.14
Access: Instant. AC INI-Param: PREFIX_SrcHostPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

tel2IPRoutingTransportType 9.1.5003.9.10.3.1.1.2.20.1.1.15
Access: Instant. AC INI-Param: PREFIX_TransportType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), udp(0), tcp(1), tls(2)  

tel2IPRoutingSourceTrunkGroupID 9.1.5003.9.10.3.1.1.2.20.1.1.16
Access: Instant. AC INI-Param: PREFIX_SrcTrunkGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..99  

iP2TelRoutingTable 9.1.5003.9.10.3.1.1.2.20.2
Phone prefix to Trunk group (or Hunt Group for MP-1xx)routing table. The table is used for routing outgoing IP Telco calls, according to received from IP destination phone number.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IP2TelRoutingEntry

iP2TelRoutingEntry 9.1.5003.9.10.3.1.1.2.20.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  IP2TelRoutingEntry  

iP2TelRoutingIndex 9.1.5003.9.10.3.1.1.2.20.2.1.1
Entry number, starting at 0. AC INI-Param: PstnPrefix_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..119  

iP2TelRoutingRowStatus 9.1.5003.9.10.3.1.1.2.20.2.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

iP2TelRoutingAction 9.1.5003.9.10.3.1.1.2.20.2.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

iP2TelRoutingActionResult 9.1.5003.9.10.3.1.1.2.20.2.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

iP2TelRoutingPrefix 9.1.5003.9.10.3.1.1.2.20.2.1.5
Phone number prefix. up to 80 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PstnPrefix_DestPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..80)  

iP2TelRoutingTrunkGroupID 9.1.5003.9.10.3.1.1.2.20.2.1.6
Trunk/Hunt group ID. Access: Instant. AC INI-Param: PstnPrefix_TrunkGroupId
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..99  

iP2TelRoutingSrcPrefix 9.1.5003.9.10.3.1.1.2.20.2.1.7
Calling Phone number prefix. up to 49 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PstnPrefix_SourcePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

iP2TelRoutingAddress 9.1.5003.9.10.3.1.1.2.20.2.1.8
Address (IP or DNS name). Access: Instant. AC INI-Param: PstnPrefix_SourceAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

iP2TelRoutingProfileID 9.1.5003.9.10.3.1.1.2.20.2.1.9
Profile ID. Access: Instant. AC INI-Param: PstnPrefix_ProfileId
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..9  

iP2TelRoutingSourceIPGroupID 9.1.5003.9.10.3.1.1.2.20.2.1.10
Access: Instant. AC INI-Param: PstnPrefix_SrcIPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

iP2TelRoutingDestHostPrefix 9.1.5003.9.10.3.1.1.2.20.2.1.11
Access: Instant. AC INI-Param: PstnPrefix_DestHostPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

iP2TelRoutingSourceHostPrefix 9.1.5003.9.10.3.1.1.2.20.2.1.12
Access: Instant. AC INI-Param: PstnPrefix_SrcHostPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

dnsInfoTable 9.1.5003.9.10.3.1.1.2.20.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DnsInfoEntry

dnsInfoEntry 9.1.5003.9.10.3.1.1.2.20.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  DnsInfoEntry  

dnsInfoIndex 9.1.5003.9.10.3.1.1.2.20.3.1.1
Entry number, starting at 0. AC INI-Param: Dns2Ip_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..19  

dnsInfoRowStatus 9.1.5003.9.10.3.1.1.2.20.3.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dnsInfoAction 9.1.5003.9.10.3.1.1.2.20.3.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

dnsInfoActionResult 9.1.5003.9.10.3.1.1.2.20.3.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

dnsInfoDomainName 9.1.5003.9.10.3.1.1.2.20.3.1.5
Domain Name. Access: Instant. AC INI-Param: Dns2Ip_DomainName
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..69)  

dnsInfoFirstIPAddress 9.1.5003.9.10.3.1.1.2.20.3.1.6
IP Address. Access: Instant. AC INI-Param: Dns2Ip_FirstIpAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

dnsInfoSecondIPAddress 9.1.5003.9.10.3.1.1.2.20.3.1.7
IP Address. Access: Instant. AC INI-Param: Dns2Ip_SecondIpAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

dnsInfoThirdIPAddress 9.1.5003.9.10.3.1.1.2.20.3.1.8
IP Address. Access: Instant. AC INI-Param: Dns2Ip_ThirdIpAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

dnsInfoFourthIPAddress 9.1.5003.9.10.3.1.1.2.20.3.1.9
IP Address. Access: Instant. AC INI-Param: Dns2Ip_FourthIpAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

srvInfoTable 9.1.5003.9.10.3.1.1.2.20.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SrvInfoEntry

srvInfoEntry 9.1.5003.9.10.3.1.1.2.20.4.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SrvInfoEntry  

srvInfoIndex 9.1.5003.9.10.3.1.1.2.20.4.1.1
Entry number, starting at 0. AC INI-Param: Srv2Ip_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..9  

srvInfoRecordNum 9.1.5003.9.10.3.1.1.2.20.4.1.2
Equals to the entry number. AC INI-Param: Srv2Ip_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..9  

srvInfoRowStatus 9.1.5003.9.10.3.1.1.2.20.4.1.3
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

srvInfoAction 9.1.5003.9.10.3.1.1.2.20.4.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

srvInfoActionResult 9.1.5003.9.10.3.1.1.2.20.4.1.5
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

srvInfoInternalDomainName 9.1.5003.9.10.3.1.1.2.20.4.1.6
the Domain name for the SRV query. Access: Instant. AC INI-Param: Srv2Ip_InternalDomain
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

srvInfoTransportType 9.1.5003.9.10.3.1.1.2.20.4.1.7
the transport type. Access: Instant. AC INI-Param: Srv2Ip_TransportType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER uDP(0), tCP(1), tLS(2)  

srvInfoDNSName 9.1.5003.9.10.3.1.1.2.20.4.1.8
the DNS in the SRV Query Result. Access: Instant. AC INI-Param: Srv2Ip_Dns1
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..99)  

srvInfoPriority 9.1.5003.9.10.3.1.1.2.20.4.1.9
the Priority of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Priority1
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65000  

srvInfoWeight 9.1.5003.9.10.3.1.1.2.20.4.1.10
the Weight of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Weight1
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65000  

srvInfoPort 9.1.5003.9.10.3.1.1.2.20.4.1.11
the port of the DNS. Access: Instant. AC INI-Param: Srv2Ip_Port1
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65534  

srvInfoDNSName2 9.1.5003.9.10.3.1.1.2.20.4.1.12
the DNS in the SRV Query Result. Access: Instant. AC INI-Param: Srv2Ip_Dns2
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..99)  

srvInfoPriority2 9.1.5003.9.10.3.1.1.2.20.4.1.13
the Priority of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Priority2
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65000  

srvInfoWeight2 9.1.5003.9.10.3.1.1.2.20.4.1.14
the Weight of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Weight2
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65000  

srvInfoPort2 9.1.5003.9.10.3.1.1.2.20.4.1.15
the port of the DNS. Access: Instant. AC INI-Param: Srv2Ip_Port2
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65534  

srvInfoDNSName3 9.1.5003.9.10.3.1.1.2.20.4.1.16
the DNS in the SRV Query Result. Access: Instant. AC INI-Param: Srv2Ip_Dns3
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..99)  

srvInfoPriority3 9.1.5003.9.10.3.1.1.2.20.4.1.17
the Priority of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Priority3
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65000  

srvInfoWeight3 9.1.5003.9.10.3.1.1.2.20.4.1.18
the Weight of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Weight3
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65000  

srvInfoPort3 9.1.5003.9.10.3.1.1.2.20.4.1.19
the port of the DNS. Access: Instant. AC INI-Param: Srv2Ip_Port3
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65534  

forwardOnBusyTrunkDestTable 9.1.5003.9.10.3.1.1.2.20.5
GwApp Forward On Busy Trunk Destination Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ForwardOnBusyTrunkDestEntry

forwardOnBusyTrunkDestEntry 9.1.5003.9.10.3.1.1.2.20.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ForwardOnBusyTrunkDestEntry  

forwardOnBusyTrunkDestIndex 9.1.5003.9.10.3.1.1.2.20.5.1.1
Entry number, starting at 0. AC INI-Param: ForwardOnBusyTrunkDest_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..99  

forwardOnBusyTrunkDestRowStatus 9.1.5003.9.10.3.1.1.2.20.5.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

forwardOnBusyTrunkDestAction 9.1.5003.9.10.3.1.1.2.20.5.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

forwardOnBusyTrunkDestActionResult 9.1.5003.9.10.3.1.1.2.20.5.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

forwardOnBusyTrunkDestTrunkGroupId 9.1.5003.9.10.3.1.1.2.20.5.1.5
GwApp Forward On Busy Trunk Destination Table. Access: Instant. AC INI-Param: ForwardOnBusyTrunkDest_TrunkGroupId
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..99  

forwardOnBusyTrunkDestForwardDestination 9.1.5003.9.10.3.1.1.2.20.5.1.6
GwApp Forward On Busy Trunk Destination Table. Access: Instant. AC INI-Param: ForwardOnBusyTrunkDest_ForwardDestination
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..99)  

routingEnableDigitDelivery2IP 9.1.5003.9.10.3.1.1.2.20.21
Enable automatic digit delivery to IP side after call is connected. Access: Offline. AC INI-Param: ENABLEDIGITDELIVERY2IP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

routingSourceIPAddressInput 9.1.5003.9.10.3.1.1.2.20.22
Decides the origin of the source ip address looked at when routing using the IP --> Tel table. 0 - Contact 1 - Recieved packet source IP address. Access: Instant. AC INI-Param: SOURCEIPADDRESSINPUT
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notConfigured(-1), sIPContactHeader(0), layer3SourceIP(1)  

altRouteCause 9.1.5003.9.10.3.1.1.2.20.10
OBJECT IDENTIFIER    

altRouteCauseIP2TELTable 9.1.5003.9.10.3.1.1.2.20.10.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AltRouteCauseIP2TELEntry

altRouteCauseIP2TELEntry 9.1.5003.9.10.3.1.1.2.20.10.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AltRouteCauseIP2TELEntry  

altRouteCauseIP2TELIndex 9.1.5003.9.10.3.1.1.2.20.10.21.1.1
Entry number, starting at 0. AC INI-Param: AltRouteCauseIp2Tel_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4  

altRouteCauseIP2TELRowStatus 9.1.5003.9.10.3.1.1.2.20.10.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

altRouteCauseIP2TELAction 9.1.5003.9.10.3.1.1.2.20.10.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

altRouteCauseIP2TELActionResult 9.1.5003.9.10.3.1.1.2.20.10.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

altRouteCauseIP2TELReleaseCause 9.1.5003.9.10.3.1.1.2.20.10.21.1.5
Release Cause. Access: Instant. AC INI-Param: AltRouteCauseIp2Tel_ReleaseCause
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..232  

altRouteCauseTEL2IPTable 9.1.5003.9.10.3.1.1.2.20.10.22
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AltRouteCauseTEL2IPEntry

altRouteCauseTEL2IPEntry 9.1.5003.9.10.3.1.1.2.20.10.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AltRouteCauseTEL2IPEntry  

altRouteCauseTEL2IPIndex 9.1.5003.9.10.3.1.1.2.20.10.22.1.1
Entry number, starting at 0. AC INI-Param: AltRouteCauseTel2Ip_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4  

altRouteCauseTEL2IPRowStatus 9.1.5003.9.10.3.1.1.2.20.10.22.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

altRouteCauseTEL2IPAction 9.1.5003.9.10.3.1.1.2.20.10.22.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

altRouteCauseTEL2IPActionResult 9.1.5003.9.10.3.1.1.2.20.10.22.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

altRouteCauseTEL2IPReleaseCause 9.1.5003.9.10.3.1.1.2.20.10.22.1.5
Release Cause. Access: Instant. AC INI-Param: AltRouteCauseTel2Ip_ReleaseCause
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..700  

manipulation 9.1.5003.9.10.3.1.1.2.21
OBJECT IDENTIFIER    

manipulationRemovePrefix 9.1.5003.9.10.3.1.1.2.21.1
Remove prefix defined in IP to Trunk Group table (IP to Tel calls). Access: Instant. AC INI-Param: REMOVEPREFIX
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

manipulationAddTrunkGroupAsPrefix 9.1.5003.9.10.3.1.1.2.21.2
Add Trunk Group ID on which the call was received as the called number prefix. Access: Instant. AC INI-Param: ADDTRUNKGROUPASPREFIX
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

manipulationAddPortAsPrefix 9.1.5003.9.10.3.1.1.2.21.3
Add port number (Analog gateway) / Trunk ID (Digital gateway) as called number prefix. Access: Instant. AC INI-Param: ADDPORTASPREFIX
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

manipulationReplaceEmptyDstWithPortNumber 9.1.5003.9.10.3.1.1.2.21.4
Replace empty destination number (received from Tel side) with port number. Access: Instant. AC INI-Param: REPLACEEMPTYDSTWITHPORTNUMBER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

manipulationCIDNotification 9.1.5003.9.10.3.1.1.2.21.5
If NO PRESENTATION arrived from PSTN and this parameter enabled,than the presentation will be allowed. If this parameter disabled, the, presentation will be restricted. Access: Instant. AC INI-Param: CIDNOTIFICATION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

manipulationUseSourceNumberAsDisplayName 9.1.5003.9.10.3.1.1.2.21.6
if set to 1 Use source number as display name if empty. if set to 2 always use source number as display name . Access: Instant. AC INI-Param: USESOURCENUMBERASDISPLAYNAME
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1), overwrite(2)  

manipulationAddNPIandTON2CalledNumber 9.1.5003.9.10.3.1.1.2.21.7
Add NPI and TON as prefix to called number. Access: Instant. AC INI-Param: ADDNPIANDTON2CALLEDNUMBER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

manipulationAddNPIandTON2CallingNumber 9.1.5003.9.10.3.1.1.2.21.8
Add NPI and TON as prefix to calling number. Access: Instant. AC INI-Param: ADDNPIANDTON2CALLINGNUMBER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

manipulationUseDisplayNameAsSourceNumber 9.1.5003.9.10.3.1.1.2.21.9
when set to 1 then If display name exists, use it as source number. If not, set presentation as restricted. Access: Instant. AC INI-Param: USEDISPLAYNAMEASSOURCENUMBER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

manipulationAddPrefixToRedirectNumber 9.1.5003.9.10.3.1.1.2.21.10
Prefix which added to redirect phone number. Access: Instant. AC INI-Param: PREFIX2REDIRECTNUMBER
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..7)  

manipulationAddPhoneContextAsPrefix 9.1.5003.9.10.3.1.1.2.21.11
add the phone context to src/dest phone number as prefix. Access: Instant. AC INI-Param: ADDPHONECONTEXTASPREFIX
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

manipulationBlindTransferAddPrefix 9.1.5003.9.10.3.1.1.2.21.12
Add keying sequence for performing blind transfer as transfer number prefix. Access: Instant. AC INI-Param: KEYBLINDTRANSFERADDPREFIX
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

manipulationSourceMode 9.1.5003.9.10.3.1.1.2.21.13
Describes the headers containing source number after manipulation: (0) both FROM and P-Asserted contain src number after manipulations (1) only FROM contains src number after manipulation. Access: Instant. AC INI-Param: SOURCEMANIPULATIONMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fromAndPai(0), fromOnly(1)  

manipulationAddTrunkGroupAsPrefixToSource 9.1.5003.9.10.3.1.1.2.21.14
Add Trunk Group ID on which the call was received as the calling number prefix. Access: Instant. AC INI-Param: ADDTRUNKGROUPASPREFIXTOSOURCE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

manipulationSetTel2IpRedirectReason 9.1.5003.9.10.3.1.1.2.21.15
If redirect (diversion) data is received from the PSTN interface, the redirect reason is set to the value of this parameter, before transferring it to the IP. default value is -1 --> not change the received value. . Access: Instant. AC INI-Param: SetTel2IpRedirectReason
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notConfigured(-1), unknown(0), bust(1), noReply(2), networkBusy(3), deflection(4), dTEOutOfOrder(9), forwardingDTE(10), transfer(13), pickUp(14), systematicOrUnconditional(15)  

manipulationSetIp2TelRedirectReason 9.1.5003.9.10.3.1.1.2.21.16
If redirect (diversion) data is received from the IP side, the redirect reason is set to the value of this parameter, before transferring it to the PSTN interface. default value is -1 --> not change the received value. . Access: Instant. AC INI-Param: SetIp2TelRedirectReason
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notConfigured(-1), unknown(0), bust(1), noReply(2), networkBusy(3), deflection(4), dTEOutOfOrder(9), forwardingDTE(10), transfer(13), pickUp(14), systematicOrUnconditional(15)  

manipulationSetIp2TelRedirectScreeningIndicator 9.1.5003.9.10.3.1.1.2.21.17
Override screening indicator value of the redirect number in Setup messages to PSTN interface. Access: Instant. AC INI-Param: SetIp2TelRedirectScreeningInd
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notConfigured(-1), userProvided(0), userPassed(1), userFailed(2), networkProvided(3)  

dstIP2TELTable 9.1.5003.9.10.3.1.1.2.21.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DstIP2TELEntry

dstIP2TELEntry 9.1.5003.9.10.3.1.1.2.21.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  DstIP2TELEntry  

dstIP2TELIndex 9.1.5003.9.10.3.1.1.2.21.21.1.1
Destination number, starting at 0. AC INI-Param: NumberMapIp2Tel_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..99  

dstIP2TELRowStatus 9.1.5003.9.10.3.1.1.2.21.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dstIP2TELAction 9.1.5003.9.10.3.1.1.2.21.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

dstIP2TELActionResult 9.1.5003.9.10.3.1.1.2.21.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

dstIP2TELPrefix 9.1.5003.9.10.3.1.1.2.21.21.1.5
Access: Instant. AC INI-Param: NumberMapIp2Tel_DestinationPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..100)  

dstIP2TELNumOfStrippedDigits 9.1.5003.9.10.3.1.1.2.21.21.1.6
Num of stripped digits, Remove from left. Access: Instant. AC INI-Param: NumberMapIp2Tel_RemoveFromLeft
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..211  

dstIP2TELPrefixToAdd 9.1.5003.9.10.3.1.1.2.21.21.1.7
Prefix to Add. Access: Instant. AC INI-Param: NumberMapIp2Tel_Prefix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

dstIP2TELNumOfDigitsToLeave 9.1.5003.9.10.3.1.1.2.21.21.1.8
Number of digits to leave. Access: Instant. AC INI-Param: NumberMapIp2Tel_LeaveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

dstIP2TELNumberPlan 9.1.5003.9.10.3.1.1.2.21.21.1.9
Number Plan. Access: Instant. AC INI-Param: NumberMapIp2Tel_NumberPlan
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), e164Public(1), private(9), notConfigured(255)  

dstIP2TELNumberType 9.1.5003.9.10.3.1.1.2.21.21.1.10
Number Type. Access: Instant. AC INI-Param: NumberMapIp2Tel_NumberType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), international-Level2Regional(1), national-Level1Regional(2), networkSpecific-NetworkPISN(3), subscriber-Level0Regional(4), abbreviated(6), notConfigured(255)  

dstIP2TELSourcePrefix 9.1.5003.9.10.3.1.1.2.21.21.1.11
Source Prefix. Access: Instant. AC INI-Param: NumberMapIp2Tel_SourcePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..100)  

dstIP2TELSourceIP 9.1.5003.9.10.3.1.1.2.21.21.1.12
Source IP. Access: Instant. AC INI-Param: NumberMapIp2Tel_SourceAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..16)  

dstIP2TELNumOfDigitsToRemFromRight 9.1.5003.9.10.3.1.1.2.21.21.1.13
Num Of digits To Remove from Right. Access: Instant. AC INI-Param: NumberMapIp2Tel_RemoveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..211  

dstIP2TELSuffix2Add 9.1.5003.9.10.3.1.1.2.21.21.1.14
Suffix To Add. Access: Instant. AC INI-Param: NumberMapIp2Tel_Suffix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

dstIP2TELIsPresentationRestricted 9.1.5003.9.10.3.1.1.2.21.21.1.15
Is Presentation Restricted. Access: Instant. AC INI-Param: NumberMapIp2Tel_IsPresentationRestricted
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

dstTEL2IPTable 9.1.5003.9.10.3.1.1.2.21.22
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DstTEL2IPEntry

dstTEL2IPEntry 9.1.5003.9.10.3.1.1.2.21.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  DstTEL2IPEntry  

dstTEL2IPIndex 9.1.5003.9.10.3.1.1.2.21.22.1.1
Destination number, starting at 0. AC INI-Param: NumberMapTel2Ip_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..119  

dstTEL2IPRowStatus 9.1.5003.9.10.3.1.1.2.21.22.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dstTEL2IPAction 9.1.5003.9.10.3.1.1.2.21.22.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

dstTEL2IPActionResult 9.1.5003.9.10.3.1.1.2.21.22.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

dstTEL2IPPrefix 9.1.5003.9.10.3.1.1.2.21.22.1.5
Access: Instant. AC INI-Param: NumberMapTel2Ip_DestinationPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..100)  

dstTEL2IPNumOfStrippedDigits 9.1.5003.9.10.3.1.1.2.21.22.1.6
Num of stripped digits. Access: Instant. AC INI-Param: NumberMapTel2Ip_RemoveFromLeft
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..211  

dstTEL2IPPrefixToAdd 9.1.5003.9.10.3.1.1.2.21.22.1.7
Prefix to Add. Access: Instant. AC INI-Param: NumberMapTel2Ip_Prefix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

dstTEL2IPNumOfDigitsToLeave 9.1.5003.9.10.3.1.1.2.21.22.1.8
Number of digits to leave. Access: Instant. AC INI-Param: NumberMapTel2Ip_LeaveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

dstTEL2IPNumberPlan 9.1.5003.9.10.3.1.1.2.21.22.1.9
Number Plan. Access: Instant. AC INI-Param: NumberMapTel2Ip_NumberPlan
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), e164Public(1), private(9), notConfigured(255)  

dstTEL2IPNumberType 9.1.5003.9.10.3.1.1.2.21.22.1.10
Number Type. Access: Instant. AC INI-Param: NumberMapTel2Ip_NumberType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), international-Level2Regional(1), national-Level1Regional(2), networkSpecific-NetworkPISN(3), subscriber-Level0Regional(4), abbreviated(6), notConfigured(255)  

dstTEL2IPSourcePrefix 9.1.5003.9.10.3.1.1.2.21.22.1.11
Access: Instant. AC INI-Param: NumberMapTel2Ip_SourcePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..100)  

dstTEL2IPNumOfDigitsToRemFromRight 9.1.5003.9.10.3.1.1.2.21.22.1.12
Num Of digits To Remove from Right. Access: Instant. AC INI-Param: NumberMapTel2Ip_RemoveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..211  

dstTEL2IPSuffix2Add 9.1.5003.9.10.3.1.1.2.21.22.1.13
Suffix To Add. Access: Instant. AC INI-Param: NumberMapTel2Ip_Suffix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

dstTEL2IPIsPresentationRestricted 9.1.5003.9.10.3.1.1.2.21.22.1.14
Is Presentation Restricted. Access: Instant. AC INI-Param: NumberMapTel2Ip_IsPresentationRestricted
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

dstTEL2IPSourceIPAddress 9.1.5003.9.10.3.1.1.2.21.22.1.15
Source Address. Access: Instant. AC INI-Param: NumberMapTel2Ip_SourceAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

dstTEL2IPSourceTrunkGroupID 9.1.5003.9.10.3.1.1.2.21.22.1.16
GwApp Tel-to-IP Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapTel2Ip_SrcTrunkGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..99  

dstTEL2IPSourceIPGroupID 9.1.5003.9.10.3.1.1.2.21.22.1.17
GwApp Tel-to-IP Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapTel2Ip_SrcIPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..8  

srcIP2TELTable 9.1.5003.9.10.3.1.1.2.21.23
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SrcIP2TELEntry

srcIP2TELEntry 9.1.5003.9.10.3.1.1.2.21.23.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SrcIP2TELEntry  

srcIP2TELIndex 9.1.5003.9.10.3.1.1.2.21.23.1.1
Source number, starting at 0. AC INI-Param: SourceNumberMapIp2Tel_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..19  

srcIP2TELRowStatus 9.1.5003.9.10.3.1.1.2.21.23.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

srcIP2TELAction 9.1.5003.9.10.3.1.1.2.21.23.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

srcIP2TELActionResult 9.1.5003.9.10.3.1.1.2.21.23.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

srcIP2TELPrefix 9.1.5003.9.10.3.1.1.2.21.23.1.5
Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_SourcePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..100)  

srcIP2TELNumOfStrippedDigits 9.1.5003.9.10.3.1.1.2.21.23.1.6
Num of stripped digits. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_RemoveFromLeft
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..211  

srcIP2TELPrefixToAdd 9.1.5003.9.10.3.1.1.2.21.23.1.7
Prefix to Add. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_Prefix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

srcIP2TELNumOfDigitsToLeave 9.1.5003.9.10.3.1.1.2.21.23.1.8
Number of digits to leave. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_LeaveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

srcIP2TELNumberPlan 9.1.5003.9.10.3.1.1.2.21.23.1.9
Number Plan. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_NumberPlan
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), e164Public(1), private(9), notConfigured(255)  

srcIP2TELNumberType 9.1.5003.9.10.3.1.1.2.21.23.1.10
Number Type. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_NumberType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), international-Level2Regional(1), national-Level1Regional(2), networkSpecific-NetworkPISN(3), subscriber-Level0Regional(4), abbreviated(6), notConfigured(255)  

srcIP2TELDestPrefix 9.1.5003.9.10.3.1.1.2.21.23.1.11
Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_DestinationPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..100)  

srcIP2TELPresentation 9.1.5003.9.10.3.1.1.2.21.23.1.12
Presentation. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_IsPresentationRestricted
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notBlocked(0), blocked(1), notConfigured(255)  

srcIP2TELNumOfDigitsToRemFromRight 9.1.5003.9.10.3.1.1.2.21.23.1.13
Num Of digits To Remove from Right. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_RemoveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..211  

srcIP2TELSuffix2Add 9.1.5003.9.10.3.1.1.2.21.23.1.14
Suffix To Add. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_Suffix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

srcIP2TELSourceIPAddress 9.1.5003.9.10.3.1.1.2.21.23.1.15
Source Address. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_SourceAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

srcTEL2IPTable 9.1.5003.9.10.3.1.1.2.21.24
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SrcTEL2IPEntry

srcTEL2IPEntry 9.1.5003.9.10.3.1.1.2.21.24.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SrcTEL2IPEntry  

srcTEL2IPIndex 9.1.5003.9.10.3.1.1.2.21.24.1.1
Source number, starting at 0. AC INI-Param: SourceNumberMapTel2Ip_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..119  

srcTEL2IPRowStatus 9.1.5003.9.10.3.1.1.2.21.24.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

srcTEL2IPAction 9.1.5003.9.10.3.1.1.2.21.24.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

srcTEL2IPActionResult 9.1.5003.9.10.3.1.1.2.21.24.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

srcTEL2IPPrefix 9.1.5003.9.10.3.1.1.2.21.24.1.5
Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_SourcePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..100)  

srcTEL2IPNumOfStrippedDigits 9.1.5003.9.10.3.1.1.2.21.24.1.6
Num of stripped digits, Remove from left. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_RemoveFromLeft
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..211  

srcTEL2IPPrefixToAdd 9.1.5003.9.10.3.1.1.2.21.24.1.7
Prefix to Add. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_Prefix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

srcTEL2IPNumOfDigitsToLeave 9.1.5003.9.10.3.1.1.2.21.24.1.8
Number of digits to leave. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_LeaveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

srcTEL2IPNumberPlan 9.1.5003.9.10.3.1.1.2.21.24.1.9
Number Plan. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_NumberPlan
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), e164Public(1), private(9), notConfigured(255)  

srcTEL2IPNumberType 9.1.5003.9.10.3.1.1.2.21.24.1.10
Number Type. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_NumberType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), international-Level2Regional(1), national-Level1Regional(2), networkSpecific-NetworkPISN(3), subscriber-Level0Regional(4), abbreviated(6), notConfigured(255)  

srcTEL2IPDestPrefix 9.1.5003.9.10.3.1.1.2.21.24.1.11
Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_DestinationPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..100)  

srcTEL2IPPresentation 9.1.5003.9.10.3.1.1.2.21.24.1.12
Presentation. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_IsPresentationRestricted
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notBlocked(0), blocked(1), notConfigured(255)  

srcTEL2IPNumOfDigitsToRemFromRight 9.1.5003.9.10.3.1.1.2.21.24.1.13
Num Of digits To Remove from Right. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_RemoveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..211  

srcTEL2IPSuffix2Add 9.1.5003.9.10.3.1.1.2.21.24.1.14
Suffix To Add. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_Suffix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

srcTEL2IPSourceIPAddress 9.1.5003.9.10.3.1.1.2.21.24.1.15
Source Address. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_SourceAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

srcTEL2IPSourceTrunkGroupID 9.1.5003.9.10.3.1.1.2.21.24.1.16
GwApp IP-toTel Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapIp2Tel_SrcTrunkGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..99  

srcTEL2IPSourceIPGroupID 9.1.5003.9.10.3.1.1.2.21.24.1.17
GwApp IP-toTel Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapIp2Tel_SrcIPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..8  

phoneContextTable 9.1.5003.9.10.3.1.1.2.21.25
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PhoneContextEntry

phoneContextEntry 9.1.5003.9.10.3.1.1.2.21.25.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  PhoneContextEntry  

phoneContextIndex 9.1.5003.9.10.3.1.1.2.21.25.1.1
Entry number, starting at 0. AC INI-Param: PhoneContext_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..19  

phoneContextRowStatus 9.1.5003.9.10.3.1.1.2.21.25.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

phoneContextAction 9.1.5003.9.10.3.1.1.2.21.25.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

phoneContextActionResult 9.1.5003.9.10.3.1.1.2.21.25.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

phoneContextNPI 9.1.5003.9.10.3.1.1.2.21.25.1.5
Number Plan. Access: Instant. AC INI-Param: PhoneContext_Npi
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), unknown(0), e164Public(1), private(9)  

phoneContextTON 9.1.5003.9.10.3.1.1.2.21.25.1.6
Number Type. Access: Instant. AC INI-Param: PhoneContext_Ton
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), unknown(0), international-Level2Regional(1), national-Level1Regional(2), networkSpecific-NetworkPISN(3), subscriber-Level0Regional(4), abbreviated(6)  

phoneContextPhoneContext 9.1.5003.9.10.3.1.1.2.21.25.1.7
Phone-Context. Access: Instant. AC INI-Param: PhoneContext_Context
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..99)  

redirectNumberMapIp2TelTable 9.1.5003.9.10.3.1.1.2.21.26
GwApp IP-to-Tel Redirect Phone Number Manipulation Rules Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RedirectNumberMapIp2TelEntry

redirectNumberMapIp2TelEntry 9.1.5003.9.10.3.1.1.2.21.26.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  RedirectNumberMapIp2TelEntry  

redirectNumberMapIp2TelIndex 9.1.5003.9.10.3.1.1.2.21.26.1.1
Entry number, starting at 0. AC INI-Param: RedirectNumberMapIp2Tel_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..19  

redirectNumberMapIp2TelRowStatus 9.1.5003.9.10.3.1.1.2.21.26.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

redirectNumberMapIp2TelAction 9.1.5003.9.10.3.1.1.2.21.26.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

redirectNumberMapIp2TelActionResult 9.1.5003.9.10.3.1.1.2.21.26.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

redirectNumberMapIp2TelDestinationPrefix 9.1.5003.9.10.3.1.1.2.21.26.1.5
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_DestinationPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..100)  

redirectNumberMapIp2TelRedirectPrefix 9.1.5003.9.10.3.1.1.2.21.26.1.6
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_RedirectPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..100)  

redirectNumberMapIp2TelSourceAddress 9.1.5003.9.10.3.1.1.2.21.26.1.7
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_SourceAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

redirectNumberMapIp2TelNumberType 9.1.5003.9.10.3.1.1.2.21.26.1.8
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_NumberType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(255), unknown(0), international(1), national(2), networkSpecific(3), subscriber(4), abbreviated(6)  

redirectNumberMapIp2TelNumberPlan 9.1.5003.9.10.3.1.1.2.21.26.1.9
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_NumberPlan
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(255), unknown(0), e164Public(1), private(9)  

redirectNumberMapIp2TelRemoveFromLeft 9.1.5003.9.10.3.1.1.2.21.26.1.10
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_RemoveFromLeft
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..211  

redirectNumberMapIp2TelRemoveFromRight 9.1.5003.9.10.3.1.1.2.21.26.1.11
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_RemoveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..211  

redirectNumberMapIp2TelLeaveFromRight 9.1.5003.9.10.3.1.1.2.21.26.1.12
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_LeaveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

redirectNumberMapIp2TelPrefixToAdd 9.1.5003.9.10.3.1.1.2.21.26.1.13
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_Prefix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

redirectNumberMapIp2TelSuffixToAdd 9.1.5003.9.10.3.1.1.2.21.26.1.14
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_Suffix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

redirectNumberMapIp2TelIsPresentationRestricted 9.1.5003.9.10.3.1.1.2.21.26.1.15
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_IsPresentationRestricted
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(255), allowed(0), restricted(1)  

redirectNumberMapIp2TelSrcTrunkGroupID 9.1.5003.9.10.3.1.1.2.21.26.1.16
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_SrcTrunkGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..99  

redirectNumberMapIp2TelSrcIPGroupID 9.1.5003.9.10.3.1.1.2.21.26.1.17
Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_SrcIPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

redirectNumberMapTel2IpTable 9.1.5003.9.10.3.1.1.2.21.27
GwApp Tel-to-IP Redirect Phone Number Manipulation Rules Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RedirectNumberMapTel2IpEntry

redirectNumberMapTel2IpEntry 9.1.5003.9.10.3.1.1.2.21.27.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  RedirectNumberMapTel2IpEntry  

redirectNumberMapTel2IpIndex 9.1.5003.9.10.3.1.1.2.21.27.1.1
Entry number, starting at 0. AC INI-Param: RedirectNumberMapTel2Ip_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..19  

redirectNumberMapTel2IpRowStatus 9.1.5003.9.10.3.1.1.2.21.27.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

redirectNumberMapTel2IpAction 9.1.5003.9.10.3.1.1.2.21.27.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

redirectNumberMapTel2IpActionResult 9.1.5003.9.10.3.1.1.2.21.27.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

redirectNumberMapTel2IpDestinationPrefix 9.1.5003.9.10.3.1.1.2.21.27.1.5
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_DestinationPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..100)  

redirectNumberMapTel2IpRedirectPrefix 9.1.5003.9.10.3.1.1.2.21.27.1.6
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_RedirectPrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..100)  

redirectNumberMapTel2IpSourceAddress 9.1.5003.9.10.3.1.1.2.21.27.1.7
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_SourceAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

redirectNumberMapTel2IpNumberType 9.1.5003.9.10.3.1.1.2.21.27.1.8
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_NumberType
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

redirectNumberMapTel2IpNumberPlan 9.1.5003.9.10.3.1.1.2.21.27.1.9
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_NumberPlan
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

redirectNumberMapTel2IpRemoveFromLeft 9.1.5003.9.10.3.1.1.2.21.27.1.10
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_RemoveFromLeft
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..211  

redirectNumberMapTel2IpRemoveFromRight 9.1.5003.9.10.3.1.1.2.21.27.1.11
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_RemoveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..211  

redirectNumberMapTel2IpLeaveFromRight 9.1.5003.9.10.3.1.1.2.21.27.1.12
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_LeaveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

redirectNumberMapTel2IpPrefixToAdd 9.1.5003.9.10.3.1.1.2.21.27.1.13
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_Prefix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

redirectNumberMapTel2IpSuffixToAdd 9.1.5003.9.10.3.1.1.2.21.27.1.14
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_Suffix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

redirectNumberMapTel2IpIsPresentationRestricted 9.1.5003.9.10.3.1.1.2.21.27.1.15
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_IsPresentationRestricted
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(255), allowed(0), restricted(1)  

redirectNumberMapTel2IpSrcTrunkGroupID 9.1.5003.9.10.3.1.1.2.21.27.1.16
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_SrcTrunkGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..99  

redirectNumberMapTel2IpSrcIPGroupID 9.1.5003.9.10.3.1.1.2.21.27.1.17
Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_SrcIPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

connectivityQos 9.1.5003.9.10.3.1.1.2.22
OBJECT IDENTIFIER    

connectivityQosMaxAllowedPL 9.1.5003.9.10.3.1.1.2.22.1
The maximum percentage of packet loss that will not prevent normal routing. Access: Instant. AC INI-Param: IPCONNQOSMAXALLOWEDPL
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

connectivityQosMaxAllowedDelay 9.1.5003.9.10.3.1.1.2.22.2
The maximum delay that will not prevent normal routing (msec). Access: Instant. AC INI-Param: IPCONNQOSMAXALLOWEDDELAY
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..10000  

connectivityQosEffectivePeriod 9.1.5003.9.10.3.1.1.2.22.3
if during this period [in seconds], no updated qos info received, theold qos info is discarded. if qos poor, and no calls alowed, after this period, calls will be allowed again. Access: Instant. AC INI-Param: IPCONNQOSEFFECTIVEPERIOD
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..10000  

connectivityQosSamplesToAvarage 9.1.5003.9.10.3.1.1.2.22.4
number of samples to avarage. in other words define the weiught of the new sample. Access: Instant. AC INI-Param: IPCONNQOSSAMPLESTOAVARAGE
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

digitalGW 9.1.5003.9.10.3.1.1.3
OBJECT IDENTIFIER    

digitalGWBChannelNegotiation 9.1.5003.9.10.3.1.1.3.1
ISDN B-Channel negotiation mode. Access: Instant. AC INI-Param: BCHANNELNEGOTIATION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1), any(2)  

digitalGWSwapRedirectNumber 9.1.5003.9.10.3.1.1.3.2
Swap Redirect and Called numbers. Access: Instant. AC INI-Param: SWAPREDIRECTNUMBER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

digitalGWEnableTransferCap 9.1.5003.9.10.3.1.1.3.3
Select Transfer Capabilities method between H.323/Q.931 and ISDN/Q.931. Access: Instant. AC INI-Param: ENABLETRANSFERCAP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

digitalGWR2Category 9.1.5003.9.10.3.1.1.3.4
MFC\R2 Calling Party's category. Access: Instant. AC INI-Param: R2CATEGORY
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

digitalGWISDNRxOverlap 9.1.5003.9.10.3.1.1.3.5
Enable reception of overlap dialing from ISDN side. Access: Instant. AC INI-Param: ISDNRXOVERLAP
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

digitalGWCASSendHookFlash 9.1.5003.9.10.3.1.1.3.6
0 (default): Hookflash not forwarded 1:HookFlash forwarded - Testing. Access: Instant. AC INI-Param: CASSENDHOOKFLASH
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

digitalGWISDNTransferCapability 9.1.5003.9.10.3.1.1.3.7
Send transfer capability to ISDN side on setup message -1:Do not Overwrite 0:Audio 3.1 1:Speech 2:Data 3:Audio. Access: Instant. AC INI-Param: ISDNTRANSFERCAPABILITY
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER doNotOverwrite(-1), modem(0), voice(1), data(2), audio(3)  

digitalGWEnableTDMOverIp 9.1.5003.9.10.3.1.1.3.8
Enable gateway to maintain a permanent RTP connection. Access: Offline. AC INI-Param: ENABLETDMOVERIP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

digitalGWTransparentCoderOnDataCall 9.1.5003.9.10.3.1.1.3.9
In case the transfer capability of a call from ISDN is data open with transparent coder. Access: Instant. AC INI-Param: TRANSPARENTCODERONDATACALL
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

digitalGWSupportRedirectInFacility 9.1.5003.9.10.3.1.1.3.10
Search for redirect number in facility IE. Access: Instant. AC INI-Param: SUPPORTREDIRECTINFACILITY
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

digitalGWPIForDisconnectMsg 9.1.5003.9.10.3.1.1.3.11
Configure PIForDisconnectMsg in order to overwrite PI value received in ISDN Disconnect message. Access: Instant. AC INI-Param: PIFORDISCONNECTMSG
Status: obsolete Access: read-write
OBJECT-TYPE    
  Integer32 -1..8  

digitalGWConnectOnProgressInd 9.1.5003.9.10.3.1.1.3.12
FXS:generate CallerId siganls during ringing FXO:collect CallerId and use it in Setup message. Access: Instant. AC INI-Param: CONNECTONPROGRESSIND
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

digitalGWLocalISDNRBSource 9.1.5003.9.10.3.1.1.3.13
If the ringback tone source is not IP, who should supply the Ringback tone. 0 - PBX/PSTN (default) ; 1- GW. Access: Instant. AC INI-Param: LOCALISDNRBSOURCE
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER pbx(0), gateway(1)  

digitalGWEnableUuiTel2Ip 9.1.5003.9.10.3.1.1.3.14
Enable User-User IE to pass in Setup from ISDN to IP. Access: Instant. AC INI-Param: ENABLEUUITEL2IP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

digitalGWEnableUuiIp2Tel 9.1.5003.9.10.3.1.1.3.15
Enable User-User IE to pass in Setup from IP to ISDN. Access: Instant. AC INI-Param: ENABLEUUIIP2TEL
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

digitalGWSendISDNTransferOnConnect 9.1.5003.9.10.3.1.1.3.16
Send TBCT/ECT/RLT request only when second leg call is connected. Access: Instant. AC INI-Param: SENDISDNTRANSFERONCONNECT
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

digitalGWEnableISDNTunnelingTel2Ip 9.1.5003.9.10.3.1.1.3.17
Enable ISDN tunneling to pass Setup and Facility messages from ISDN to IP. Access: Instant. AC INI-Param: ENABLEISDNTUNNELINGTEL2IP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), usingHeader(1), usingBody(2)  

digitalGWEnableISDNTunnelingIp2Tel 9.1.5003.9.10.3.1.1.3.18
Enable ISDN tunneling to pass Setup and Facility messages from IP to ISDN. Access: Instant. AC INI-Param: ENABLEISDNTUNNELINGIP2TEL
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), usingHeader(1), usingBody(2)  

digitalGWEnableCallingPartyCategory 9.1.5003.9.10.3.1.1.3.19
Enables NI2 calling party category translation to SIP. Access: Instant. AC INI-Param: ENABLECALLINGPARTYCATEGORY
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

digitalGWPlayRBTOnISDNTransfer 9.1.5003.9.10.3.1.1.3.40
Play local RBT on TBCT/ECT/RLT transfer. Access: Instant. AC INI-Param: PLAYRBTONISDNTRANSFER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

iSDNRxOverlapTable 9.1.5003.9.10.3.1.1.3.21
Choose either: Disabled or Enabled (default). Any number bigger than one = Number of digits to receive. Note 1: If enabled, the Mediant 2000 receives ISDN called number that is sent in the 'Overlap' mode. Note 2: The SETUP to IP is sent only after the number (including 'Sending Complete' Info Element) was fully received (via SETUP and/or subsequent INFO Q.931 messages).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ISDNRxOverlapEntry

iSDNRxOverlapEntry 9.1.5003.9.10.3.1.1.3.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ISDNRxOverlapEntry  

iSDNRxOverlapIndex 9.1.5003.9.10.3.1.1.3.21.1.1
Trunk number. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..84  

iSDNRxOverlapEnable 9.1.5003.9.10.3.1.1.3.21.1.2
Receive overlap from ISDN side. Access: Instant. AC INI-Param: ISDNRXOVERLAP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), localReceiving(1), throughSIP(2)  

trunkTransferTable 9.1.5003.9.10.3.1.1.3.22
Trunk Transfer Mode table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrunkTransferEntry

trunkTransferEntry 9.1.5003.9.10.3.1.1.3.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TrunkTransferEntry  

trunkTransferIndex 9.1.5003.9.10.3.1.1.3.22.1.1
Trunk number. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..84  

trunkTransferMode 9.1.5003.9.10.3.1.1.3.22.1.2
The type of transfer the PSTN/PBX supports. Access: Instant. AC INI-Param: TRUNKTRANSFERMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), casNFA(1), iSDN(2), casNormal(3), qSIGSingleStep(4), qSIGPathReplacement(5)  

progressIndicatorToISDNTable 9.1.5003.9.10.3.1.1.3.23
Progress Indicator To ISDN table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ProgressIndicatorToISDNEntry

progressIndicatorToISDNEntry 9.1.5003.9.10.3.1.1.3.23.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ProgressIndicatorToISDNEntry  

progressIndicatorToISDNIndex 9.1.5003.9.10.3.1.1.3.23.1.1
Trunk number. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..84  

progressIndicatorToISDNValue 9.1.5003.9.10.3.1.1.3.23.1.2
Override the value of progress indicator to ISDN side in ALERT PROGRESS and PROCEEDING messages. Access: Instant. AC INI-Param: PROGRESSINDICATOR2ISDN
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notSet(-1), localRB(0), remoteRB1(1), remoteRB8(8)  

playRBToneToTrunkTable 9.1.5003.9.10.3.1.1.3.24
Play RB Tone To Trunk table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PlayRBToneToTrunkEntry

playRBToneToTrunkEntry 9.1.5003.9.10.3.1.1.3.24.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  PlayRBToneToTrunkEntry  

playRBToneToTrunkIndex 9.1.5003.9.10.3.1.1.3.24.1.1
Trunk number. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..84  

playRBToneToTrunkValue 9.1.5003.9.10.3.1.1.3.24.1.2
Enable ringback tone playing towards trunk side. Refer to User's Manual for details. Access: Instant. AC INI-Param: PLAYRBTONE2TRUNK
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notConfigured(-1), doNotPlay(0), playOnLocal(1), preferIp(2), playLocalUntilRemoteMediaArrives(3)  

iSDNTransferCapabilityTable 9.1.5003.9.10.3.1.1.3.25
ISDN Transfer Capability Trunk table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ISDNTransferCapabilityEntry

iSDNTransferCapabilityEntry 9.1.5003.9.10.3.1.1.3.25.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ISDNTransferCapabilityEntry  

iSDNTransferCapabilityIndex 9.1.5003.9.10.3.1.1.3.25.1.1
Trunk number. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..84  

iSDNTransferCapabilityValue 9.1.5003.9.10.3.1.1.3.25.1.2
Send transfer capability to ISDN side on setup message -1:Do not Overwrite 0:Audio 3.1 1:Speech 2:Data 3:Audio. Access: Instant. AC INI-Param: ISDNTRANSFERCAPABILITY
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER doNotOverwrite(-1), modem(0), voice(1), data(2), audio(3)  

localISDNRBSourceTable 9.1.5003.9.10.3.1.1.3.26
Play RB Tone To Trunk table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LocalISDNRBSourceEntry

localISDNRBSourceEntry 9.1.5003.9.10.3.1.1.3.26.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  LocalISDNRBSourceEntry  

localISDNRBSourceIndex 9.1.5003.9.10.3.1.1.3.26.1.1
Trunk number. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..84  

localISDNRBSourceValue 9.1.5003.9.10.3.1.1.3.26.1.2
If the ringback tone source is not IP, who should supply the Ringback tone. 0 - PBX/PSTN (default) ; 1- GW. Access: Instant. AC INI-Param: LOCALISDNRBSOURCE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pbx(0), gateway(1)  

pIForDisconnectMsgTable 9.1.5003.9.10.3.1.1.3.27
PI For Disconnect Message Trunk table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PIForDisconnectMsgEntry

pIForDisconnectMsgEntry 9.1.5003.9.10.3.1.1.3.27.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  PIForDisconnectMsgEntry  

pIForDisconnectMsgIndex 9.1.5003.9.10.3.1.1.3.27.1.1
Trunk number. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..84  

pIForDisconnectMsgValue 9.1.5003.9.10.3.1.1.3.27.1.2
Configure PIForDisconnectMsg in order to overwrite PI value received in ISDN Disconnect message. Access: Instant. AC INI-Param: PIFORDISCONNECTMSG
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..8  

pSTNAlertTimeoutTable 9.1.5003.9.10.3.1.1.3.28
PSTN Alert Timeout
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PSTNAlertTimeoutEntry

pSTNAlertTimeoutEntry 9.1.5003.9.10.3.1.1.3.28.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  PSTNAlertTimeoutEntry  

pSTNAlertTimeoutIndex 9.1.5003.9.10.3.1.1.3.28.1.1
Trunk number. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..84  

pSTNAlertTimeoutValue 9.1.5003.9.10.3.1.1.3.28.1.2
Max time (in seconds) to wait for connect from PSTN. Access: Instant. AC INI-Param: TRUNKPSTNALERTTIMEOUT
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..600  

iE 9.1.5003.9.10.3.1.1.3.20
OBJECT IDENTIFIER    

iEAddIEInSetup 9.1.5003.9.10.3.1.1.3.20.1
Additional information element to send in ISDN Setup message. Access: Instant. AC INI-Param: ADDIEINSETUP
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

iESendIEOnTG 9.1.5003.9.10.3.1.1.3.20.2
Configure trunk groups on which to send additional IE. Access: Instant. AC INI-Param: SENDIEONTG
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

mlpp 9.1.5003.9.10.3.1.1.3.29
OBJECT IDENTIFIER    

mlppCallPriorityMode 9.1.5003.9.10.3.1.1.3.29.1
Priority mode: 0-disable 1-MLPP. Access: Instant. AC INI-Param: CALLPRIORITYMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), mLPP(1)  

mlppDefaultNamespace 9.1.5003.9.10.3.1.1.3.29.2
MLPP Default Namespace. Access: Instant. AC INI-Param: MLPPDEFAULTNAMESPACE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dSN(1), dOD(2), dRSN(3)  

mlppDefaultCallPriority 9.1.5003.9.10.3.1.1.3.29.3
SIP Default Call Priority. Access: Instant. AC INI-Param: SIPDEFAULTCALLPRIORITY
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..29)  

mlppDiffServ 9.1.5003.9.10.3.1.1.3.29.4
DiffServ value for MLPP calls. Access: Instant. AC INI-Param: MLPPDIFFSERV
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

mlppPreemptionToneDuration 9.1.5003.9.10.3.1.1.3.29.5
Preemption Tone Duration, 0-60 seconds. Access: Instant. AC INI-Param: PreemptionToneDuration
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..60  

mlppDefaultServiceDomain 9.1.5003.9.10.3.1.1.3.29.6
MLPP Default Service Domain String (6 Hex Digits). Access: Instant. AC INI-Param: MLPPDefaultServiceDomain
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..6)  

mlppNormalizedServiceDomain 9.1.5003.9.10.3.1.1.3.29.7
MLPP Normalized Service Domain String (6 Hex Digits). Access: Instant. AC INI-Param: MLPPNormalizedServiceDomain
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..6)  

mlppRoutineRTPDSCP 9.1.5003.9.10.3.1.1.3.29.8
Defines the RTP DSCP for MLPP Routine call. Access: Instant. AC INI-Param: MLPPROUTINERTPDSCP
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..63  

mlppPriorityRTPDSCP 9.1.5003.9.10.3.1.1.3.29.9
Defines the RTP DSCP for MLPP Priority call. Access: Instant. AC INI-Param: MLPPPRIORITYRTPDSCP
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..63  

mlppImmediateRTPDSCP 9.1.5003.9.10.3.1.1.3.29.10
Defines the RTP DSCP for MLPP Immediate call. Access: Instant. AC INI-Param: MLPPIMMEDIATERTPDSCP
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..63  

mlppFlashRTPDSCP 9.1.5003.9.10.3.1.1.3.29.11
Defines the RTP DSCP for MLPP Flash call. Access: Instant. AC INI-Param: MLPPFLASHRTPDSCP
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..63  

mlppFlashOverRTPDSCP 9.1.5003.9.10.3.1.1.3.29.12
Defines the RTP DSCP for MLPP Flash-Override call. Access: Instant. AC INI-Param: MLPPFLASHOVERRTPDSCP
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..63  

mlppFlashOverOverRTPDSCP 9.1.5003.9.10.3.1.1.3.29.13
Defines the RTP DSCP for MLPP Flash-Override-Override call. Access: Instant. AC INI-Param: MLPPFLASHOVEROVERRTPDSCP
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..63  

mlppE911Behavior 9.1.5003.9.10.3.1.1.3.29.14
Defines the MLPP E911 Preemption mode: (0)-Standard Mode (ets calls will have the highest priority and can preemt any mlpp call), (1)-Treat as routine mode (ets calls are treated as routine calls). Access: Instant. AC INI-Param: E911MLPPBEHAVIOR
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER standardMode(0), routineMode(1)  

analogGW 9.1.5003.9.10.3.1.1.4
OBJECT IDENTIFIER    

analogGWEnableReversalPolarity 9.1.5003.9.10.3.1.1.4.1
FXO: CONNECT/DISCONNECT calls upon detection of polarity signal. FXS: generate the signal. Access: Instant. AC INI-Param: ENABLEREVERSALPOLARITY
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

analogGWEnableCurrentDisconnect 9.1.5003.9.10.3.1.1.4.2
Disconnect call upon detection of current disconnect signal. Access: Instant. AC INI-Param: ENABLECURRENTDISCONNECT
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

analogGWRegretTime 9.1.5003.9.10.3.1.1.4.3
Time to wait between phone hang up and call termination. Access: Instant. AC INI-Param: REGRETTIME
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

analogGWHotLineToneDuration 9.1.5003.9.10.3.1.1.4.4
Duration of played hotline tone, after the gateway seizes the line in response to ringing. Access: Instant. AC INI-Param: HOTLINETONEDURATION
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..60  

enableCallWaitingPerPortTable 9.1.5003.9.10.3.1.1.4.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnableCallWaitingPerPortEntry

enableCallWaitingPerPortEntry 9.1.5003.9.10.3.1.1.4.21.1
table
Status: current Access: not-accessible
OBJECT-TYPE    
  EnableCallWaitingPerPortEntry  

enableCallWaitingPerPortIndex 9.1.5003.9.10.3.1.1.4.21.1.1
. AC INI-Param: CallWaitingPerPort_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..23  

enableCallWaitingPerPortIsUsed 9.1.5003.9.10.3.1.1.4.21.1.2
Is this index used. Access: Instant. AC INI-Param: CallWaitingPerPort_IsUsed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

enableCallWaitingPerPortModule 9.1.5003.9.10.3.1.1.4.21.1.3
module. AC INI-Param: CallWaitingPerPort_Module
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

enableCallWaitingPerPortPort 9.1.5003.9.10.3.1.1.4.21.1.4
port. AC INI-Param: CallWaitingPerPort_Port
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

enableCallWaitingPerPortAction 9.1.5003.9.10.3.1.1.4.21.1.5
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

enableCallWaitingPerPortActionResult 9.1.5003.9.10.3.1.1.4.21.1.6
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

enableCallWaitingPerPortEnable 9.1.5003.9.10.3.1.1.4.21.1.7
Enable. Access: Instant. AC INI-Param: CallWaitingPerPort_IsEnabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1), valueNotSet(255)  

fxs 9.1.5003.9.10.3.1.1.4.10
OBJECT IDENTIFIER    

fxsCutThrough 9.1.5003.9.10.3.1.1.4.10.1
Enable call connection without On-Hook/Off-Hook process 'Cut-Through'. Access: Instant. AC INI-Param: CUTTHROUGH
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

fxsMeteringMode 9.1.5003.9.10.3.1.1.4.10.2
Method of automatic generation of payphone metering pulses. Access: Instant. AC INI-Param: PAYPHONEMETERINGMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), routingTable(1)  

fxsFXSOOSBehavior 9.1.5003.9.10.3.1.1.4.10.3
FxsOosBehavior control how the fxs endpoints of a gateway, will behave in case of Out of Service. OutofService state may be result of two scenarios: a. EndPoint not configured in trunkgroup (Disabled) b. runtime busy out situation 0: NONE - no special activity. Disabled endpoint not responses, bsyout endpoint responses as usual 1: Play ReOrder tone 2: Reverse Polarity 3: Play ReOrder tone and Reverse Polarity. Access: Instant. AC INI-Param: FXSOOSBEHAVIOR
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), reorderTone(1), polarityReversal(2), currentDisconnect(4)  

fxsSetOOSOnRegistrationFail 9.1.5003.9.10.3.1.1.4.10.4
Should deactivate endpoint service on registration failure. Access: Instant. AC INI-Param: OOSONREGISTRATIONFAIL
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

chargeCodesTable 9.1.5003.9.10.3.1.1.4.10.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ChargeCodesEntry

chargeCodesEntry 9.1.5003.9.10.3.1.1.4.10.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ChargeCodesEntry  

chargeCodesIndex 9.1.5003.9.10.3.1.1.4.10.21.1.1
Charge code index. AC INI-Param: ChargeCode_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..24  

chargeCodesRowStatus 9.1.5003.9.10.3.1.1.4.10.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

chargeCodesAction 9.1.5003.9.10.3.1.1.4.10.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

chargeCodesActionResult 9.1.5003.9.10.3.1.1.4.10.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

chargeCodesPeriod1EndTime 9.1.5003.9.10.3.1.1.4.10.21.1.5
Access: Instant. AC INI-Param: ChargeCode_EndTime1
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

chargeCodesPeriod1PulseInterval 9.1.5003.9.10.3.1.1.4.10.21.1.6
Access: Instant. AC INI-Param: ChargeCode_PulseInterval1
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..5000  

chargeCodesPeriod1PulsesOnAnswer 9.1.5003.9.10.3.1.1.4.10.21.1.7
Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer1
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

chargeCodesPeriod2EndTime 9.1.5003.9.10.3.1.1.4.10.21.1.8
Access: Instant. AC INI-Param: ChargeCode_EndTime2
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

chargeCodesPeriod2PulseInterval 9.1.5003.9.10.3.1.1.4.10.21.1.9
Access: Instant. AC INI-Param: ChargeCode_PulseInterval2
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..5000  

chargeCodesPeriod2PulsesOnAnswer 9.1.5003.9.10.3.1.1.4.10.21.1.10
Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer2
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

chargeCodesPeriod3EndTime 9.1.5003.9.10.3.1.1.4.10.21.1.11
Access: Instant. AC INI-Param: ChargeCode_EndTime3
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

chargeCodesPeriod3PulseInterval 9.1.5003.9.10.3.1.1.4.10.21.1.12
Access: Instant. AC INI-Param: ChargeCode_PulseInterval3
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..5000  

chargeCodesPeriod3PulsesOnAnswer 9.1.5003.9.10.3.1.1.4.10.21.1.13
Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer3
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

chargeCodesPeriod4EndTime 9.1.5003.9.10.3.1.1.4.10.21.1.14
Access: Instant. AC INI-Param: ChargeCode_EndTime4
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

chargeCodesPeriod4PulseInterval 9.1.5003.9.10.3.1.1.4.10.21.1.15
Access: Instant. AC INI-Param: ChargeCode_PulseInterval4
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..5000  

chargeCodesPeriod4PulsesOnAnswer 9.1.5003.9.10.3.1.1.4.10.21.1.16
Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer4
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

toneIndexTable 9.1.5003.9.10.3.1.1.4.10.22
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ToneIndexEntry

toneIndexEntry 9.1.5003.9.10.3.1.1.4.10.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ToneIndexEntry  

toneIndexIndex 9.1.5003.9.10.3.1.1.4.10.22.1.1
Charge code index. AC INI-Param: ToneIndex_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..23  

toneIndexRowStatus 9.1.5003.9.10.3.1.1.4.10.22.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

toneIndexAction 9.1.5003.9.10.3.1.1.4.10.22.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

toneIndexActionResult 9.1.5003.9.10.3.1.1.4.10.22.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

toneIndexFXSPortFirst 9.1.5003.9.10.3.1.1.4.10.22.1.5
Staring Range of FXS Port. Access: Instant. AC INI-Param: ToneIndex_FXSPort_First
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..24  

toneIndexFXSPortLast 9.1.5003.9.10.3.1.1.4.10.22.1.6
End Range of FXS Port. Access: Instant. AC INI-Param: ToneIndex_FXSPort_Last
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..24  

toneIndexSourcePrefix 9.1.5003.9.10.3.1.1.4.10.22.1.7
Source Prefix. Access: Instant. AC INI-Param: ToneIndex_SourcePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..23)  

toneIndexPriorityIndex 9.1.5003.9.10.3.1.1.4.10.22.1.8
Index used for distinctive ringing and call waiting tones. Access: Instant. AC INI-Param: ToneIndex_PriorityIndex
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..16  

fxo 9.1.5003.9.10.3.1.1.4.11
OBJECT IDENTIFIER    

fxoIsTwoStageDial 9.1.5003.9.10.3.1.1.4.11.1
Dialing Mode - One-Stage (PBX Pass-thru) or Two-Stage. Access: Instant. AC INI-Param: ISTWOSTAGEDIAL
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER oneStage(0), twoStages(1)  

fxoWaitForDialTone 9.1.5003.9.10.3.1.1.4.11.2
Wait for dial tone before initiating an outgoing call to PBX/PSTN (FXO one-stage dialing mode). Access: Instant. AC INI-Param: ISWAITFORDIALTONE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

fxoWaitForDialTime 9.1.5003.9.10.3.1.1.4.11.3
Time delay between seizing the line and start dialing (if ISWAITFORDIALTONE disabled) or after hookflash before dialing. Access: Instant. AC INI-Param: WAITFORDIALTIME
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..20000000  

fxoBetweenRingTime 9.1.5003.9.10.3.1.1.4.11.4
Timeout for releasing FXO to IP call, if FXO port doesn't detect ringing signal for this timeout. Access: Instant. AC INI-Param: FXOBETWEENRINGTIME
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..20000000  

fxoEnableVoiceDetection 9.1.5003.9.10.3.1.1.4.11.5
On FXO GWs enables sending of connect/200 OK message on speech/fax/modem detection [default 0]. In order to activate feature DSPVersionTemplateNumber should be 2 or 3. Access: Instant. AC INI-Param: ENABLEVOICEDETECTION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

fxoRingsBeforeCallerID 9.1.5003.9.10.3.1.1.4.11.6
Number of rings after which the Caller ID is detected. Access: Instant. AC INI-Param: RINGSBEFORECALLERID
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2  

fxoGuardTimeBetweenCalls 9.1.5003.9.10.3.1.1.4.11.7
Only for FXO: the time between the time that the EP execute OnHook, to the time that this EP is capable to except new IP2TEL call (and execute OfHook). Access: Instant. AC INI-Param: GUARDTIMEBETWEENCALLS
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..10  

fxoAutoDialPlayBusyTone 9.1.5003.9.10.3.1.1.4.11.8
Only for FXO, Tel2IP calls: If enable (1) - On receiving release, if autodial is used, the FXO seize the line and play Busy/Reorder tone toward the PSTN for Reorder-time duration. . Access: Instant. AC INI-Param: FXOAutoDialPlayBusyTone
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

dialing 9.1.5003.9.10.3.1.1.4.12
OBJECT IDENTIFIER    

dialingMaxDigits 9.1.5003.9.10.3.1.1.4.12.1
Maximum number of digits before dialing starts. Access: Instant. AC INI-Param: MAXDIGITS
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..49  

dialingTimeBetweenDigits 9.1.5003.9.10.3.1.1.4.12.2
Timeout in seconds between dialed digits. Access: Instant. AC INI-Param: TIMEBETWEENDIGITS
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

dialingIsSpecialDigits 9.1.5003.9.10.3.1.1.4.12.3
When disabled, pressing special digits (* or #) will terminate digit collection. When enabled, special digits can be received as part of the dialed number or Endpoint phone number. Access: Instant. AC INI-Param: ISSPECIALDIGITS
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

dialingDigitMapping 9.1.5003.9.10.3.1.1.4.12.4
The digit map patterns separated by a vertical bar (|), as defined in the MEGACO RFC. Access: Instant. AC INI-Param: DIGITMAPPING
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..152)  

dialingEnableDigitDelivery 9.1.5003.9.10.3.1.1.4.12.5
Enable automatic digit delivery to Tel side after line is off-hooked or seized. Access: Offline. AC INI-Param: ENABLEDIGITDELIVERY
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

dialingDialPlanIndex 9.1.5003.9.10.3.1.1.4.12.6
Defines the plan index to be used from the external Dial Plan file. Access: Instant. AC INI-Param: DIALPLANINDEX
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..7  

autoDialTable 9.1.5003.9.10.3.1.1.4.12.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AutoDialEntry

autoDialEntry 9.1.5003.9.10.3.1.1.4.12.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AutoDialEntry  

autoDialIndex 9.1.5003.9.10.3.1.1.4.12.21.1.1
Entry number, starting at 0. AC INI-Param: TargetOfChannel_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..23  

autoDialIsUsed 9.1.5003.9.10.3.1.1.4.12.21.1.2
Is this index used. AC INI-Param: TargetOfChannel_IsUsed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

autoDialAction 9.1.5003.9.10.3.1.1.4.12.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

autoDialActionResult 9.1.5003.9.10.3.1.1.4.12.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

autoDialDestPhoneNumber 9.1.5003.9.10.3.1.1.4.12.21.1.5
Access: Instant. AC INI-Param: TargetOfChannel_Destination
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

autoDialType 9.1.5003.9.10.3.1.1.4.12.21.1.6
Choose auto dial type. Access: Instant. AC INI-Param: TargetOfChannel_Type
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), autoDial(1), delayHotLine(2)  

autoDialModule 9.1.5003.9.10.3.1.1.4.12.21.1.7
Channels Module. AC INI-Param: TargetOfChannel_Module
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

autoDialPort 9.1.5003.9.10.3.1.1.4.12.21.1.8
Channels Port. AC INI-Param: TargetOfChannel_Port
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

callerID 9.1.5003.9.10.3.1.1.4.13
OBJECT IDENTIFIER    

callerIDEnable 9.1.5003.9.10.3.1.1.4.13.1
FXS:generate CallerId siganls during ringing FXO:collect CallerId and use it in Setup message. Access: Instant. AC INI-Param: ENABLECALLERID
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

callerDisplayTable 9.1.5003.9.10.3.1.1.4.13.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CallerDisplayEntry

callerDisplayEntry 9.1.5003.9.10.3.1.1.4.13.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  CallerDisplayEntry  

callerDisplayIndex 9.1.5003.9.10.3.1.1.4.13.21.1.1
Entry number, starting at 0. AC INI-Param: CallerDisplayInfo_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..23  

callerDisplayIsUsed 9.1.5003.9.10.3.1.1.4.13.21.1.2
Is this index used. AC INI-Param: CallerDisplayInfo_IsUsed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

callerDisplayAction 9.1.5003.9.10.3.1.1.4.13.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

callerDisplayActionResult 9.1.5003.9.10.3.1.1.4.13.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

callerDisplayCallerDisplay 9.1.5003.9.10.3.1.1.4.13.21.1.5
Caller Name. Access: Instant. AC INI-Param: CallerDisplayInfo_DisplayString
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

callerDisplayRestriction 9.1.5003.9.10.3.1.1.4.13.21.1.6
Restriction. Access: Instant. AC INI-Param: CallerDisplayInfo_IsCidRestricted
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notBlocked(0), blocked(1)  

callerDisplayModule 9.1.5003.9.10.3.1.1.4.13.21.1.7
Channels Module. AC INI-Param: CallerDisplayInfo_Module
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

callerDisplayPort 9.1.5003.9.10.3.1.1.4.13.21.1.8
Channels Port. AC INI-Param: CallerDisplayInfo_Port
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

callerIDperPortTable 9.1.5003.9.10.3.1.1.4.13.22
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CallerIDperPortEntry

callerIDperPortEntry 9.1.5003.9.10.3.1.1.4.13.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  CallerIDperPortEntry  

callerIDperPortIndex 9.1.5003.9.10.3.1.1.4.13.22.1.1
. AC INI-Param: EnableCallerId_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..23  

callerIDperPortIsUsed 9.1.5003.9.10.3.1.1.4.13.22.1.2
Is this index used. Access: Offline. AC INI-Param: EnableCallerId_IsUsed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

callerIDperPortAction 9.1.5003.9.10.3.1.1.4.13.22.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

callerIDperPortActionResult 9.1.5003.9.10.3.1.1.4.13.22.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

callerIDperPortEnable 9.1.5003.9.10.3.1.1.4.13.22.1.5
Enable. Access: Instant. AC INI-Param: EnableCallerId_IsEnabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1), valueNotSet(255)  

callerIDperPortModule 9.1.5003.9.10.3.1.1.4.13.22.1.6
Channels Module. AC INI-Param: EnableCallerId_Module
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

callerIDperPortPort 9.1.5003.9.10.3.1.1.4.13.22.1.7
Channels Port. AC INI-Param: EnableCallerId_Port
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

keypadFeatures 9.1.5003.9.10.3.1.1.4.14
OBJECT IDENTIFIER    

keypadFeaturesCFUncond 9.1.5003.9.10.3.1.1.4.14.1
Keying sequence for activating immediate Call Forward. Access: Instant. AC INI-Param: KEYCFUNCOND
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesCFDeact 9.1.5003.9.10.3.1.1.4.14.2
Keying sequence for deactivating Call Forward. Access: Instant. AC INI-Param: KEYCFDEACT
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesCFNoAnswer 9.1.5003.9.10.3.1.1.4.14.3
Keying sequence for activating Call Forward on no answer. Access: Instant. AC INI-Param: KEYCFNOANSWER
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesCFBusy 9.1.5003.9.10.3.1.1.4.14.4
Keying sequence for activating Call Forward on busy. Access: Instant. AC INI-Param: KEYCFBUSY
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesCLIR 9.1.5003.9.10.3.1.1.4.14.5
Keying sequence for activating restricted Caller ID. Access: Instant. AC INI-Param: KEYCLIR
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesCLIRDeact 9.1.5003.9.10.3.1.1.4.14.6
Keying sequence for deactivating restricted Caller ID. Access: Instant. AC INI-Param: KEYCLIRDEACT
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesHotLine 9.1.5003.9.10.3.1.1.4.14.7
Keying sequence for activating delayed Hot-line. Access: Instant. AC INI-Param: KEYHOTLINE
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesHotLineDeact 9.1.5003.9.10.3.1.1.4.14.8
Keying sequence for deactivating delayed Hot-line. Access: Instant. AC INI-Param: KEYHOTLINEDEACT
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesCFBusyOrNoAnswer 9.1.5003.9.10.3.1.1.4.14.9
Keying sequence for activating Call Forward on busy or no answer. Access: Instant. AC INI-Param: KEYCFBUSYORNOANSWER
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesCFDoNotDisturb 9.1.5003.9.10.3.1.1.4.14.10
Keying sequence for activating Do Not Disturb. Access: Instant. AC INI-Param: KEYCFDONOTDISTURB
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesBlindTransfer 9.1.5003.9.10.3.1.1.4.14.11
Keying sequence for performing blind transfer. Access: Instant. AC INI-Param: KEYBLINDTRANSFER
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesKeypadFeaturesCW 9.1.5003.9.10.3.1.1.4.14.12
Keying sequence for activating call waiting. Access: Instant. AC INI-Param: KEYCALLWAITINGDEACT
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesKeypadFeaturesCWDeact 9.1.5003.9.10.3.1.1.4.14.13
Keying sequence for deactivating call waiting. Access: Instant. AC INI-Param: KEYCALLWAITINGDEACT
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesRejectAnonymousCall 9.1.5003.9.10.3.1.1.4.14.14
Key pad pattern for rejecting anonymous call. Access: Instant. AC INI-Param: KeyRejectAnonymousCall
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

keypadFeaturesRejectAnonymousCallDeact 9.1.5003.9.10.3.1.1.4.14.15
Key pad pattern for accepting anonymous call. Access: Instant. AC INI-Param: KeyRejectAnonymousCallDeact
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

portName 9.1.5003.9.10.3.1.1.4.15
OBJECT IDENTIFIER    

namesTable 9.1.5003.9.10.3.1.1.4.15.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NamesEntry

namesEntry 9.1.5003.9.10.3.1.1.4.15.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  NamesEntry  

namesIndex 9.1.5003.9.10.3.1.1.4.15.21.1.1
Entry number, starting at 0. AC INI-Param: PortName_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..23  

namesIsUsed 9.1.5003.9.10.3.1.1.4.15.21.1.2
Is this index used. AC INI-Param: PortName_IsUsed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

namesAction 9.1.5003.9.10.3.1.1.4.15.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

namesActionResult 9.1.5003.9.10.3.1.1.4.15.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

namesPortName 9.1.5003.9.10.3.1.1.4.15.21.1.5
Access: Instant. AC INI-Param: PortName_Name
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

namesModule 9.1.5003.9.10.3.1.1.4.15.21.1.6
Module. AC INI-Param: PortName_Module
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

namesPort 9.1.5003.9.10.3.1.1.4.15.21.1.7
Port. AC INI-Param: PortName_Port
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dID 9.1.5003.9.10.3.1.1.4.16
OBJECT IDENTIFIER    

dIDEnable 9.1.5003.9.10.3.1.1.4.16.1
Enable DID support. Access: Instant. AC INI-Param: ENABLEDID
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

dIDEnableWink 9.1.5003.9.10.3.1.1.4.16.2
Enable support for DID lines using Wink. Access: Instant. AC INI-Param: ENABLEDIDWINK
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

dIDDelayBeforeDidWink 9.1.5003.9.10.3.1.1.4.16.3
delay between Off-Hook detection and Wink generation (relevant only for FXS). unit - ms. Access: Instant. AC INI-Param: DELAYBEFOREDIDWINK
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1000  

enableDidPortTable 9.1.5003.9.10.3.1.1.4.16.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnableDidPortEntry

enableDidPortEntry 9.1.5003.9.10.3.1.1.4.16.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  EnableDidPortEntry  

enableDidPortIndex 9.1.5003.9.10.3.1.1.4.16.21.1.1
. AC INI-Param: EnableDid_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..23  

enableDidPortIsUsed 9.1.5003.9.10.3.1.1.4.16.21.1.2
Is this index used. Access: Offline. AC INI-Param: EnableDid_IsUsed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

enableDidPortAction 9.1.5003.9.10.3.1.1.4.16.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

enableDidPortActionResult 9.1.5003.9.10.3.1.1.4.16.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

enableDidPortEnable 9.1.5003.9.10.3.1.1.4.16.21.1.5
Enable. Access: Instant. AC INI-Param: EnableDid_IsEnable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

enableDidPortModule 9.1.5003.9.10.3.1.1.4.16.21.1.6
Channels Module. AC INI-Param: EnableDid_Module
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

enableDidPortPort 9.1.5003.9.10.3.1.1.4.16.21.1.7
Channels Port. AC INI-Param: EnableDid_Port
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mediaGW 9.1.5003.9.10.3.1.1.5
OBJECT IDENTIFIER    

mediaGWMediaChannels 9.1.5003.9.10.3.1.1.5.1
Number of channels associated with media services (announcements, conferencing). Access: Offline. AC INI-Param: MEDIACHANNELS
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2016  

conference 9.1.5003.9.10.3.1.1.5.10
OBJECT IDENTIFIER    

conferenceID 9.1.5003.9.10.3.1.1.5.10.1
Identification of conference call (To be used by SIP INVITE). Access: Instant. AC INI-Param: CONFERENCEID
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

conferenceBipOnConference 9.1.5003.9.10.3.1.1.5.10.2
Beep when a new participant joins a conference. Access: Instant. AC INI-Param: BIPONCONFERENCE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

conferenceEnableDTMFReporting 9.1.5003.9.10.3.1.1.5.10.3
EnableConferenceDTMFReporting- if enable report in out of band format about detected DTMF digits (values 1-Report,0 - Not Report). Access: Instant. AC INI-Param: EnableConferenceDTMFReporting
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

conferenceEnableDTMFClamping 9.1.5003.9.10.3.1.1.5.10.4
EnableConferenceDTMFClamp - if enable remove detected DTMF digits from the audio stream on simple conference participant. Access: Instant. AC INI-Param: EnableConferenceDTMFClamp
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

conference3WayMode 9.1.5003.9.10.3.1.1.5.10.5
If 3wayConferenceMode=0, the usual conference mode will be used, this mode wil be compatible with our IPmedia server. The INVITE messages that are used to form a conference call, all will contain the same conIfD in sip INVITE requests. If 3wayConferenceMode=1, only the first INVITE send to conference server will use the confID. In contact header of 200OK response, the conference server returns a conference URI. This conference URI will be included (by our MP gateway) in REFER-TO header in the REFER messages, send by the MP GW to other sip clients. The sip client will join to conference by sending INVITEs to the conference server using this conference URI . 3wayConferenceMode = 2: InBoard 3w Conference. Access: Instant. AC INI-Param: 3WAYCONFERENCEMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER audioCodesMediaServer(0), noneAudioCodesMediaServer(1), onBoard(2)  

conferenceMaxInBoardCalls 9.1.5003.9.10.3.1.1.5.10.6
Max InBoard Conference Calls. Access: Offline. AC INI-Param: MaxInBoardConferenceCalls
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2  

acTWCnonAllocateablePortsTable 9.1.5003.9.10.3.1.1.5.10.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcTWCnonAllocateablePortsEntry

acTWCnonAllocateablePortsEntry 9.1.5003.9.10.3.1.1.5.10.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcTWCnonAllocateablePortsEntry  

acTWCnonAllocateablePortsIndex 9.1.5003.9.10.3.1.1.5.10.21.1.1
Line index. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..7  

acTWCnonAllocateablePortsNumber 9.1.5003.9.10.3.1.1.5.10.21.1.2
Define the Ports that are not hit by 3w conference feature. Access: Instant. AC INI-Param: 3WayConfNoneAllocateablePorts
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..24  

announcement 9.1.5003.9.10.3.1.1.5.11
OBJECT IDENTIFIER    

announcementID 9.1.5003.9.10.3.1.1.5.11.1
Identification of a play voice prompt call (To be used by SIP INVITE). Access: Instant. AC INI-Param: ANNOUNCEMENTID
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

announcementNumOfEndPoints 9.1.5003.9.10.3.1.1.5.11.2
Number of Annuncment endpoints. Access: Offline. AC INI-Param: NUMOFANNOUNCENDPOINTS
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..240  

announcementToneID 9.1.5003.9.10.3.1.1.5.11.3
Identification of a play call progress tone call (To be used by SIP INVITE). Access: Instant. AC INI-Param: TONEID
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

streaming 9.1.5003.9.10.3.1.1.5.11.10
OBJECT IDENTIFIER    

streamingID 9.1.5003.9.10.3.1.1.5.11.10.1
Identification of HTTP played voice prompt (To be used by SIP INVITE). Access: Instant. AC INI-Param: STREAMINGID
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

streamingNumOfEndPoints 9.1.5003.9.10.3.1.1.5.11.10.2
Number of Streaming endpoints. Access: Offline. AC INI-Param: NUMOFSTREAMINGENDPOINTS
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..240  

streamingRecordScriptPath 9.1.5003.9.10.3.1.1.5.11.10.3
Identification of HTTP Record Script (To be used by FOR RECORD). Access: Offline. AC INI-Param: RecordScriptPath
Status: obsolete Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..128)  

streamingMediaID 9.1.5003.9.10.3.1.1.5.11.10.4
Identification of HTTP played voice prompt (To be used by SIP INVITE). Access: Instant. AC INI-Param: MediaStreamingID
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..16)  

streamingStopRecordingOnNoSpeachTimeout 9.1.5003.9.10.3.1.1.5.11.10.5
Timeout for no speech detection used to stop recording. Access: Instant. AC INI-Param: STOPRECORDINGONNOSPEACHTIMEOUT
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..10000000  

streamingPlayFromID 9.1.5003.9.10.3.1.1.5.11.10.6
Identification of voice stream play location (To be used by SIP INVITE). Access: Instant. AC INI-Param: PLAYFROMID
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

streamingRecordToID 9.1.5003.9.10.3.1.1.5.11.10.7
Identification of voice stream recording location (To be used by SIP INVITE). Access: Instant. AC INI-Param: RECORDTOID
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

streamingNetAnnAnncID 9.1.5003.9.10.3.1.1.5.11.10.8
NetAnn Announcement ID. Access: Instant. AC INI-Param: NETANNANNCID
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

streamingMscmlID 9.1.5003.9.10.3.1.1.5.11.10.9
Identification of HTTP played voice prompt using mscml(To be used by SIP INVITE). Access: Instant. AC INI-Param: MSCMLID
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

streamingMonitorID 9.1.5003.9.10.3.1.1.5.11.10.10
Identification of Calea call (To be used by SIP INVITE). Access: Instant. AC INI-Param: MONITORID
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

vxml 9.1.5003.9.10.3.1.1.5.12
OBJECT IDENTIFIER    

vxmlID 9.1.5003.9.10.3.1.1.5.12.1
Identification of VoiceXML call (To be used by SIP INVITE). Access: Instant. AC INI-Param: VXMLID
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

vxmlNumOfEndPoints 9.1.5003.9.10.3.1.1.5.12.2
Number of VXML endpoints. Access: Offline. AC INI-Param: NUMOFVXMLENDPOINTS
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..240  

calea 9.1.5003.9.10.3.1.1.5.13
OBJECT IDENTIFIER    

caleaInterceptionDirection 9.1.5003.9.10.3.1.1.5.13.1
Defines the direction of interception of a BCT listener. Access: Offline. AC INI-Param: INTERCEPTIONDIRECTION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER outgoing(0), incoming(1)  

transcoding 9.1.5003.9.10.3.1.1.5.14
OBJECT IDENTIFIER    

transcodingID 9.1.5003.9.10.3.1.1.5.14.1
SIP Transcoding ID. Access: Instant. AC INI-Param: TRANSCODINGID
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

coders 9.1.5003.9.10.3.1.1.6
OBJECT IDENTIFIER    

codersTable 9.1.5003.9.10.3.1.1.6.1
The names of the five possible coders.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CodersEntry

codersEntry 9.1.5003.9.10.3.1.1.6.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  CodersEntry  

codersIndex 9.1.5003.9.10.3.1.1.6.1.1.1
Entry number, starting at 0. AC INI-Param: CoderName_Index
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..24  

codersRowStatus 9.1.5003.9.10.3.1.1.6.1.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: deprecated Access: read-create
OBJECT-TYPE    
  RowStatus  

codersAction 9.1.5003.9.10.3.1.1.6.1.1.3
Development Impending. AC INI-Param: N/A
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

codersActionResult 9.1.5003.9.10.3.1.1.6.1.1.4
Development Impending. AC INI-Param: N/A
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

codersName 9.1.5003.9.10.3.1.1.6.1.1.5
Coder Name. Access: Offline. AC INI-Param: N/A
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER g7231(0), g711Alaw64k(1), g711Ulaw64k(2), g729(3), g726(5), g726r16(6), g726r24(7), g726r32(8), g726r40(9), netCoder8(10), netCoder6-4(11), netCoder7-2(12), netCoder8-8(13), gWTransparent(14), g729AnnexB(17), eVRC(22), amr(23), gsm-fr(24), gsm-ms(25), gsmEfr(26), iLBC(27), qCELP(28), t38(29), g711Alaw64k-VBD(30), g711Ulaw64k-VBD(31), eVRC-B(32), g722(33), aMR-WB(34), eg711Alaw(35), eg711Ulaw(36), g7291(37), v1501mr(38), ms-rta-nb(39), invalideCoder(99)  

codersInterval 9.1.5003.9.10.3.1.1.6.1.1.6
Coder Interval. Access: Offline. AC INI-Param: CoderName_PacketInterval
Status: deprecated Access: read-create
OBJECT-TYPE    
  Unsigned32 10..255  

codersRate 9.1.5003.9.10.3.1.1.6.1.1.7
Rate in bit per second. Access: Offline. AC INI-Param: CoderName_rate
Status: deprecated Access: read-create
OBJECT-TYPE    
  Unsigned32 0..64000  

codersPayloadType 9.1.5003.9.10.3.1.1.6.1.1.8
Payload type. Access: Offline. AC INI-Param: CoderName_PayloadType
Status: deprecated Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

codersSilenceSuppression 9.1.5003.9.10.3.1.1.6.1.1.9
Silence Suppression. Access: Offline. AC INI-Param: CoderName_Sce
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), enableAdaptations(2)  

codersGroup0Table 9.1.5003.9.10.3.1.1.6.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CodersGroup0Entry

codersGroup0Entry 9.1.5003.9.10.3.1.1.6.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  CodersGroup0Entry  

codersGroup0Index 9.1.5003.9.10.3.1.1.6.2.1.1
Index Field for line. AC INI-Param: CodersGroup0_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..9  

codersGroup0RowStatus 9.1.5003.9.10.3.1.1.6.2.1.2
ROWSTATUS field for line. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

codersGroup0Action 9.1.5003.9.10.3.1.1.6.2.1.3
Mangement Field for ACTIONS. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0)  

codersGroup0ActionRes 9.1.5003.9.10.3.1.1.6.2.1.4
Mangement Field for ACTIONS RESULT. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER succeeded(0)  

codersGroup0Name 9.1.5003.9.10.3.1.1.6.2.1.5
Coders Group name. Access: Instant. AC INI-Param: CodersGroup0_Name
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER g7231(0), g711Alaw64k(1), g711Ulaw64k(2), g729(3), g726(5), g726r16(6), g726r24(7), g726r32(8), g726r40(9), netCoder8(10), netCoder6-4(11), netCoder7-2(12), netCoder8-8(13), gWTransparent(14), g729AnnexB(17), eVRC(22), amr(23), gsm-fr(24), gsm-ms(25), gsmEfr(26), iLBC(27), qCELP(28), t38(29), g711Alaw64k-VBD(30), g711Ulaw64k-VBD(31), eVRC-B(32), g722(33), aMR-WB(34), eg711Alaw(35), eg711Ulaw(36), g7291(37), v1501mr(38), ms-rta-nb(39), invalideCoder(99)  

codersGroup0PacketizationTime 9.1.5003.9.10.3.1.1.6.2.1.6
Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup0_pTime
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

codersGroup0Rate 9.1.5003.9.10.3.1.1.6.2.1.7
Coders Group rate. Access: Instant. AC INI-Param: CodersGroup0_rate
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..64000  

codersGroup0PayloadType 9.1.5003.9.10.3.1.1.6.2.1.8
Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup0_PayloadType
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..127  

codersGroup0SilenceSuppression 9.1.5003.9.10.3.1.1.6.2.1.9
Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup0_Sce
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), enableAdaptations(2)  

codersGroup1Table 9.1.5003.9.10.3.1.1.6.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CodersGroup1Entry

codersGroup1Entry 9.1.5003.9.10.3.1.1.6.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  CodersGroup1Entry  

codersGroup1Index 9.1.5003.9.10.3.1.1.6.3.1.1
Index Field for line. AC INI-Param: CodersGroup1_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..9  

codersGroup1RowStatus 9.1.5003.9.10.3.1.1.6.3.1.2
ROWSTATUS field for line. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

codersGroup1Action 9.1.5003.9.10.3.1.1.6.3.1.3
Mangement Field for ACTIONS. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0)  

codersGroup1ActionRes 9.1.5003.9.10.3.1.1.6.3.1.4
Mangement Field for ACTIONS RESULT. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER succeeded(0)  

codersGroup1Name 9.1.5003.9.10.3.1.1.6.3.1.5
Coders Group name. Access: Instant. AC INI-Param: CodersGroup1_Name
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER g7231(0), g711Alaw64k(1), g711Ulaw64k(2), g729(3), g726(5), g726r16(6), g726r24(7), g726r32(8), g726r40(9), netCoder8(10), netCoder6-4(11), netCoder7-2(12), netCoder8-8(13), gWTransparent(14), g729AnnexB(17), eVRC(22), amr(23), gsm-fr(24), gsm-ms(25), gsmEfr(26), iLBC(27), qCELP(28), t38(29), g711Alaw64k-VBD(30), g711Ulaw64k-VBD(31), eVRC-B(32), g722(33), aMR-WB(34), eg711Alaw(35), eg711Ulaw(36), g7291(37), v1501mr(38), ms-rta-nb(39), invalideCoder(99)  

codersGroup1PacketizationTime 9.1.5003.9.10.3.1.1.6.3.1.6
Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup1_pTime
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

codersGroup1Rate 9.1.5003.9.10.3.1.1.6.3.1.7
Coders Group rate. Access: Instant. AC INI-Param: CodersGroup1_rate
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..64000  

codersGroup1PayloadType 9.1.5003.9.10.3.1.1.6.3.1.8
Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup1_PayloadType
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

codersGroup1SilenceSuppression 9.1.5003.9.10.3.1.1.6.3.1.9
Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup1_Sce
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), enableAdaptations(2)  

codersGroup2Table 9.1.5003.9.10.3.1.1.6.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CodersGroup2Entry

codersGroup2Entry 9.1.5003.9.10.3.1.1.6.4.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  CodersGroup2Entry  

codersGroup2Index 9.1.5003.9.10.3.1.1.6.4.1.1
Index Field for line. AC INI-Param: CodersGroup2_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..9  

codersGroup2RowStatus 9.1.5003.9.10.3.1.1.6.4.1.2
ROWSTATUS field for line. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

codersGroup2Action 9.1.5003.9.10.3.1.1.6.4.1.3
Mangement Field for ACTIONS. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0)  

codersGroup2ActionRes 9.1.5003.9.10.3.1.1.6.4.1.4
Mangement Field for ACTIONS RESULT. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER succeeded(0)  

codersGroup2Name 9.1.5003.9.10.3.1.1.6.4.1.5
Coders Group name. Access: Instant. AC INI-Param: CodersGroup2_Name
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER g7231(0), g711Alaw64k(1), g711Ulaw64k(2), g729(3), g726(5), g726r16(6), g726r24(7), g726r32(8), g726r40(9), netCoder8(10), netCoder6-4(11), netCoder7-2(12), netCoder8-8(13), gWTransparent(14), g729AnnexB(17), eVRC(22), amr(23), gsm-fr(24), gsm-ms(25), gsmEfr(26), iLBC(27), qCELP(28), t38(29), g711Alaw64k-VBD(30), g711Ulaw64k-VBD(31), eVRC-B(32), g722(33), aMR-WB(34), eg711Alaw(35), eg711Ulaw(36), g7291(37), v1501mr(38), ms-rta-nb(39), invalideCoder(99)  

codersGroup2PacketizationTime 9.1.5003.9.10.3.1.1.6.4.1.6
Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup2_pTime
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

codersGroup2Rate 9.1.5003.9.10.3.1.1.6.4.1.7
Coders Group rate. Access: Instant. AC INI-Param: CodersGroup2_rate
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..64000  

codersGroup2PayloadType 9.1.5003.9.10.3.1.1.6.4.1.8
Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup2_PayloadType
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..127  

codersGroup2SilenceSuppression 9.1.5003.9.10.3.1.1.6.4.1.9
Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup2_Sce
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), enableAdaptations(2)  

codersGroup3Table 9.1.5003.9.10.3.1.1.6.5
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CodersGroup3Entry

codersGroup3Entry 9.1.5003.9.10.3.1.1.6.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  CodersGroup3Entry  

codersGroup3Index 9.1.5003.9.10.3.1.1.6.5.1.1
Index Field for line. AC INI-Param: CodersGroup3_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..9  

codersGroup3RowStatus 9.1.5003.9.10.3.1.1.6.5.1.2
ROWSTATUS field for line. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

codersGroup3Action 9.1.5003.9.10.3.1.1.6.5.1.3
Mangement Field for ACTIONS. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0)  

codersGroup3ActionRes 9.1.5003.9.10.3.1.1.6.5.1.4
Mangement Field for ACTIONS RESULT. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER succeeded(0)  

codersGroup3Name 9.1.5003.9.10.3.1.1.6.5.1.5
Coders Group name. Access: Instant. AC INI-Param: CodersGroup3_Name
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER g7231(0), g711Alaw64k(1), g711Ulaw64k(2), g729(3), g726(5), g726r16(6), g726r24(7), g726r32(8), g726r40(9), netCoder8(10), netCoder6-4(11), netCoder7-2(12), netCoder8-8(13), gWTransparent(14), g729AnnexB(17), eVRC(22), amr(23), gsm-fr(24), gsm-ms(25), gsmEfr(26), iLBC(27), qCELP(28), t38(29), g711Alaw64k-VBD(30), g711Ulaw64k-VBD(31), eVRC-B(32), g722(33), aMR-WB(34), eg711Alaw(35), eg711Ulaw(36), g7291(37), v1501mr(38), ms-rta-nb(39), invalideCoder(99)  

codersGroup3PacketizationTime 9.1.5003.9.10.3.1.1.6.5.1.6
Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup3_pTime
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

codersGroup3Rate 9.1.5003.9.10.3.1.1.6.5.1.7
Coders Group rate. Access: Instant. AC INI-Param: CodersGroup3_rate
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..64000  

codersGroup3PayloadType 9.1.5003.9.10.3.1.1.6.5.1.8
Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup3_PayloadType
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..127  

codersGroup3SilenceSuppression 9.1.5003.9.10.3.1.1.6.5.1.9
Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup3_Sce
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), enableAdaptations(2)  

codersGroup4Table 9.1.5003.9.10.3.1.1.6.6
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CodersGroup4Entry

codersGroup4Entry 9.1.5003.9.10.3.1.1.6.6.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  CodersGroup4Entry  

codersGroup4Index 9.1.5003.9.10.3.1.1.6.6.1.1
Index Field for line. AC INI-Param: CodersGroup4_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..9  

codersGroup4RowStatus 9.1.5003.9.10.3.1.1.6.6.1.2
ROWSTATUS field for line. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

codersGroup4Action 9.1.5003.9.10.3.1.1.6.6.1.3
Mangement Field for ACTIONS. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0)  

codersGroup4ActionRes 9.1.5003.9.10.3.1.1.6.6.1.4
Mangement Field for ACTIONS RESULT. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER succeeded(0)  

codersGroup4Name 9.1.5003.9.10.3.1.1.6.6.1.5
Coders Group name. Access: Instant. AC INI-Param: CodersGroup4_Name
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER g7231(0), g711Alaw64k(1), g711Ulaw64k(2), g729(3), g726(5), g726r16(6), g726r24(7), g726r32(8), g726r40(9), netCoder8(10), netCoder6-4(11), netCoder7-2(12), netCoder8-8(13), gWTransparent(14), g729AnnexB(17), eVRC(22), amr(23), gsm-fr(24), gsm-ms(25), gsmEfr(26), iLBC(27), qCELP(28), t38(29), g711Alaw64k-VBD(30), g711Ulaw64k-VBD(31), eVRC-B(32), g722(33), aMR-WB(34), eg711Alaw(35), eg711Ulaw(36), g7291(37), v1501mr(38), ms-rta-nb(39), invalideCoder(99)  

codersGroup4PacketizationTime 9.1.5003.9.10.3.1.1.6.6.1.6
Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup4_pTime
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

codersGroup4Rate 9.1.5003.9.10.3.1.1.6.6.1.7
Coders Group rate. Access: Instant. AC INI-Param: CodersGroup4_rate
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..64000  

codersGroup4PayloadType 9.1.5003.9.10.3.1.1.6.6.1.8
Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup4_PayloadType
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..127  

codersGroup4SilenceSuppression 9.1.5003.9.10.3.1.1.6.6.1.9
Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup4_Sce
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), enableAdaptations(2)  

supServices 9.1.5003.9.10.3.1.1.7
OBJECT IDENTIFIER    

supServicesEnableHold 9.1.5003.9.10.3.1.1.7.1
Enable Call Hold service. Access: Instant. AC INI-Param: ENABLEHOLD
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

supServicesNameID 9.1.5003.9.10.3.1.1.7.2
Enable Name Identification service. Access: Instant. AC INI-Param: ENABLENAMEIDENTIFICATION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

supServicesHoldFormat 9.1.5003.9.10.3.1.1.7.3
Call Hold format - Zero IP or 'sendonly' SDP attribute. Access: Instant. AC INI-Param: HOLDFORMAT
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER connectionIP(0), sDPattributesSendonly(1)  

supServicesSendMeteringMessageToIP 9.1.5003.9.10.3.1.1.7.4
Send metering messages to IP on detection of analog metering pulses. Access: Instant. AC INI-Param: SENDMETERING2IP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

supServicesHeldTimeout 9.1.5003.9.10.3.1.1.7.5
Maximum time allowed for call to be retreived from IP (seconds). Access: Instant. AC INI-Param: HELDTIMEOUT
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..2400  

supServicesHookFlashCode 9.1.5003.9.10.3.1.1.7.6
If this code received during session, act as if hook flash received from the TEL side. This parameter can use DIGIT MAP syntax. Access: Instant. AC INI-Param: HookFlashCode
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..25)  

supServicesCHRRTimeout 9.1.5003.9.10.3.1.1.7.7
Call hold reminder ring maximum ringing time (in seconds). Access: Instant. AC INI-Param: CHRRTIMEOUT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

supServicesEnableHold2ISDN 9.1.5003.9.10.3.1.1.7.8
Enable Hold/retrieve from and to ISDN. Access: Instant. AC INI-Param: ENABLEHOLD2ISDN
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

supServicesEnableMOH 9.1.5003.9.10.3.1.1.7.9
FXS: enable playing Music On Hold (instead of Held tone to the PSTN side). Access: Instant. AC INI-Param: EnableMOH
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

supServicesBlindTransferDisconnectTimeout 9.1.5003.9.10.3.1.1.7.30
Maximum time (milliseconds) to wait for disconnect from tel before performing blind transfer. Access: Instant. AC INI-Param: BLINDTRANSFERDISCONNECTTIMEOUT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1000000  

transfer 9.1.5003.9.10.3.1.1.7.10
OBJECT IDENTIFIER    

transferEnable 13.1
Enable Call Transfer service. Access: Instant. AC INI-Param: ENABLETRANSFER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

transferXferPrefix 13.2
Prefix added to the called number of a transferred call. Access: Instant. AC INI-Param: XFERPREFIX
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..9)  

callWaiting 9.1.5003.9.10.3.1.1.7.11
OBJECT IDENTIFIER    

callWaitingEnable 9.1.5003.9.10.3.1.1.7.11.1
Enable Call Waiting service. Access: Instant. AC INI-Param: ENABLECALLWAITING
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

callWaitingNumberOfIndications 9.1.5003.9.10.3.1.1.7.11.2
Number of Call Waiting indications to be played to the user. Access: Instant. AC INI-Param: NUMBEROFWAITINGINDICATIONS
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

callWaitingTimeBetweenIndications 9.1.5003.9.10.3.1.1.7.11.3
Time between one call waiting indication to the next (seconds). Access: Instant. AC INI-Param: TIMEBETWEENWAITINGINDICATIONS
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

callWaitingWaitingBeepDuration 9.1.5003.9.10.3.1.1.7.11.4
Call Waiting tone beep length (msec). Access: Instant. AC INI-Param: WAITINGBEEPDURATION
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 100..65535  

callWaitingTimeBeforeWaitingIndications 9.1.5003.9.10.3.1.1.7.11.5
Time before call waiting indication is sent to a busy line (seconds). Access: Instant. AC INI-Param: TIMEBEFOREWAITINGINDICATIONS
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

forwardSettings 9.1.5003.9.10.3.1.1.7.12
OBJECT IDENTIFIER    

forwardSettingsEnable 9.1.5003.9.10.3.1.1.7.12.1
Enable Call Forward service. Access: Instant. AC INI-Param: ENABLEFORWARD
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

forwardTable 9.1.5003.9.10.3.1.1.7.12.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ForwardEntry

forwardEntry 9.1.5003.9.10.3.1.1.7.12.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ForwardEntry  

forwardIndex 9.1.5003.9.10.3.1.1.7.12.21.1.1
Entry number, starting at 0. AC INI-Param: FwdInfo_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..23  

forwardIsUsed 9.1.5003.9.10.3.1.1.7.12.21.1.2
Is this index used. AC INI-Param: FwdInfo_IsUsed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

forwardAction 9.1.5003.9.10.3.1.1.7.12.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

forwardActionResult 9.1.5003.9.10.3.1.1.7.12.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

forwardForwardType 9.1.5003.9.10.3.1.1.7.12.21.1.5
Access: Instant. AC INI-Param: FwdInfo_Type
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(0), busy(1), immediate(2), noAnswer(3), busyOrNoAnswer(4), dontDisturb(5)  

forwardForwardedToNumber 9.1.5003.9.10.3.1.1.7.12.21.1.6
Access: Instant. AC INI-Param: FwdInfo_Destination
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

forwardTimeForNoReply 9.1.5003.9.10.3.1.1.7.12.21.1.7
Access: Instant. AC INI-Param: FwdInfo_NoReplyTime
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..180  

forwardModule 9.1.5003.9.10.3.1.1.7.12.21.1.8
Module. AC INI-Param: FwdInfo_Module
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

forwardPort 9.1.5003.9.10.3.1.1.7.12.21.1.9
Port. AC INI-Param: FwdInfo_Port
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

mWI 9.1.5003.9.10.3.1.1.7.13
OBJECT IDENTIFIER    

mWIEnable 9.1.5003.9.10.3.1.1.7.13.1
Enable MWI support (Message Waiting Indicator). Access: Instant. AC INI-Param: ENABLEMWI
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

mWIAnalogLamp 9.1.5003.9.10.3.1.1.7.13.2
Enable MWI support using an analog lamp (110 Volt). Access: Instant. AC INI-Param: MWIANALOGLAMP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

mWIDisplay 9.1.5003.9.10.3.1.1.7.13.3
Enable MWI support using Caller ID interface. Access: Instant. AC INI-Param: MWIDISPLAY
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

mWIServerIP 9.1.5003.9.10.3.1.1.7.13.4
MWI server IP address. Access: Instant. AC INI-Param: MWISERVERIP
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

mWIExpirationTime 9.1.5003.9.10.3.1.1.7.13.5
MWI service subscription expiration time (seconds). Access: Instant. AC INI-Param: MWIEXPIRATIONTIME
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..2000000  

mWIServerTransportType 9.1.5003.9.10.3.1.1.7.13.6
MWI server transport type. Access: Instant. AC INI-Param: MWISERVERTRANSPORTTYPE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notConfigured(-1), uDP(0), tCP(1), tLS(2)  

supServicesConference 9.1.5003.9.10.3.1.1.7.14
OBJECT IDENTIFIER    

supServicesConferenceEnable3Way 9.1.5003.9.10.3.1.1.7.14.1
Enable 3 way conference feature. Access: Offline. AC INI-Param: ENABLE3WAYCONFERENCE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

supServicesConferenceEstablishCode 9.1.5003.9.10.3.1.1.7.14.2
Control Key activation of the 3 way conference. Access: Instant. AC INI-Param: CONFERENCECODE
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..25)  

tones 9.1.5003.9.10.3.1.1.8
OBJECT IDENTIFIER    

tonesTimeForReorderTone 9.1.5003.9.10.3.1.1.8.1
Duration of reorder tone playing before FXO releases line. Access: Instant. AC INI-Param: TIMEFORREORDERTONE
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

tonesTimeForDialTone 9.1.5003.9.10.3.1.1.8.2
Duration of played dial tone after the gateway seizes the line in response to ringing. Access: Instant. AC INI-Param: TIMEFORDIALTONE
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..60  

tonesPlayRBTone2Ip 9.1.5003.9.10.3.1.1.8.3
Enable ringback tone playing towards IP. Refer to User's Manual for details. Access: Instant. AC INI-Param: PLAYRBTONE2IP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

tonesPlayRBTone2Tel 9.1.5003.9.10.3.1.1.8.4
Enable ringback tone playing towards Tel side. Refer to User's Manual for details. Access: Instant. AC INI-Param: PLAYRBTONE2TEL
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER doNotPlay(0), playOnLocal(1), preferIp(2), playLocalUntilRemoteMediaArrives(3)  

tonesStutterToneDuration 9.1.5003.9.10.3.1.1.8.5
Time for playing confirmation tone before normal dial tone is played (msec). Access: Instant. AC INI-Param: STUTTERTONEDURATION
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..60000  

tonesPlayRBToneXferSuccess 9.1.5003.9.10.3.1.1.8.6
Play RB tone on transfer success. Access: Instant. AC INI-Param: PLAYRBTONEONXFER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

tonesFirstCallRBTId 9.1.5003.9.10.3.1.1.8.7
the index of the first Call RB tone in the call-progress tones file. Access: Instant. AC INI-Param: FIRSTCALLRBTID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..1000  

tonesPrecedenceRingingType 9.1.5003.9.10.3.1.1.8.8
the index of the first Call RB tone in the call-progress tones file. Access: Instant. AC INI-Param: PRECEDENCERINGINGTYPE
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..16  

tonesFirstCallWaitingToneID 9.1.5003.9.10.3.1.1.8.9
The index of the first Call Waiting tone in the call-progress tones file. Access: Instant. AC INI-Param: FIRSTCALLWAITINGTONEID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..1000  

tonesEnableComfortTone 9.1.5003.9.10.3.1.1.8.10
Enable Comfort Tone for playing a patience comfort tone between Invite and 18x response. [0] - Disabled [1] - Enabled. Comfort Tone will be played. Access: Instant. AC INI-Param: ENABLECOMFORTTONE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

logger 9.1.5003.9.10.3.1.1.9
OBJECT IDENTIFIER    

loggerGwAppCdrReportLevel 9.1.5003.9.10.3.1.1.9.1
CDR reports timing. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), endCall(1), startAndEndCall(2), connectAndEndCall(3), startConnectAndEndCall(4)  

loggerGwDebugLevel 9.1.5003.9.10.3.1.1.9.2
Configure different debug level. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER logLevel0(0), logLevel1(1), logLevel2(2), logLevel3(3), logLevel4(4), logLevel5(5), logLevel100(100), logLevel200(200)  

loggerCDRSyslogServerIP 9.1.5003.9.10.3.1.1.9.3
Syslog server IP address for sending CDRs. Access: Instant. AC INI-Param: CDRSYSLOGSERVERIP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

progressIndicators 9.1.5003.9.10.3.1.1.10
OBJECT IDENTIFIER    

progressIndicators2ISDN 9.1.5003.9.10.3.1.1.10.1
Override the value of progress indicator to ISDN side in ALERT PROGRESS and PROCEEDING messages. Access: Instant. AC INI-Param: PROGRESSINDICATOR2ISDN
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER notSet(-1), localRB(0), remoteRB1(1), remoteRB8(8)  

progressIndicators2IP 9.1.5003.9.10.3.1.1.10.2
Determine whether to send the Progress Indicator to IP. Access: Instant. AC INI-Param: PROGRESSINDICATOR2IP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notSet(-1), localRB(0), remoteRB1(1), remoteRB8(8)  

screeningIndicators 9.1.5003.9.10.3.1.1.10.20
OBJECT IDENTIFIER    

screeningIndicators2Ip 9.1.5003.9.10.3.1.1.10.20.1
Override screening indicator value in Setup messages to IP. Access: Instant. AC INI-Param: SCREENINGIND2IP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notOverwrited(-1), userProvided(0), userPassed(1), userFailed(2), networkProvided(3)  

screeningIndicators2ISDN 9.1.5003.9.10.3.1.1.10.20.2
Override screening indicator value in Setup messages to ISDN. Access: Instant. AC INI-Param: SCREENINGIND2ISDN
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notOverwrited(-1), userProvided(0), userPassed(1), userFailed(2), networkProvided(3)  

misc 9.1.5003.9.10.3.1.1.11
OBJECT IDENTIFIER    

miscDisconnectOnBusyTone 9.1.5003.9.10.3.1.1.11.1
Release call if gateway receives busy or fast busy tone before the call is answered. Access: Instant. AC INI-Param: DISCONNECTONBUSYTONE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

miscDisconnectOnSilence 9.1.5003.9.10.3.1.1.11.2
Disconnect calls on a configured silence timeout. Access: Offline. AC INI-Param: ENABLESILENCEDISCONNECT
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

miscEnableBusyOut 9.1.5003.9.10.3.1.1.11.3
Take trunks out of service in case of LAN down. Access: Instant. AC INI-Param: ENABLEBUSYOUT
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

miscSecureCallsFromIp 9.1.5003.9.10.3.1.1.11.4
Gateway will only accept calls from IP addresses that are defined in the Tel to IP Routing table. Access: Instant. AC INI-Param: SECURECALLSFROMIP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

miscStaticNATIP 9.1.5003.9.10.3.1.1.11.5
static NAT IP, to be supported by the gateway. Access: Instant. AC INI-Param: STATICNATIP
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

miscSilenceDisconnectTimeout 9.1.5003.9.10.3.1.1.11.6
Defines the Silence period to be detected. Access: Offline. AC INI-Param: FarEndDisconnectSilencePeriod
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..28800  

miscIsFaxUsed 9.1.5003.9.10.3.1.1.11.7
Enable T.38 Fax signaling. Access: Instant. AC INI-Param: IsFaxUsed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noFax(0), t38(1), g711(2), fallBack(3)  

miscDelayTime 9.1.5003.9.10.3.1.1.11.8
Gateway delay time after reset (seconds). Access: Instant. AC INI-Param: GWAPPDelayTime
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..45  

miscDetFaxOnAnswerTone 9.1.5003.9.10.3.1.1.11.9
Start T.38 fax procedure after fax answer tone detection or after HDLC preamble signal detection. Access: Instant. AC INI-Param: DETFAXONANSWERTONE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscDefaultReleaseCause 9.1.5003.9.10.3.1.1.11.10
The release cause that will be sent to IP or to Tel when gateway initiates release by itself. Access: Instant. AC INI-Param: DEFAULTRELEASECAUSE
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..128  

miscT38UseRTPPort 9.1.5003.9.10.3.1.1.11.11
T.38 packets will be received on RTP port. Access: Instant. AC INI-Param: T38USERTPPORT
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscRFC2833PayloadType 9.1.5003.9.10.3.1.1.11.12
control the RFC 2833 Relay RTP Payload type. Access: Instant. AC INI-Param: RFC2833PayloadType
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 96..127  

miscIsCiscoSceMode 9.1.5003.9.10.3.1.1.11.13
In use with G.729 - if enabled and SCE=2 then AnnexB=no. Access: Instant. AC INI-Param: ISCISCOSCEMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscDisconnectOnDialTone 9.1.5003.9.10.3.1.1.11.14
Release call if gateway receives dial tone before the call is answered or during voice session. Access: Instant. AC INI-Param: DISCONNECTONDIALTONE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscEnableSemiAttendedTransfer 9.1.5003.9.10.3.1.1.11.15
Access: Instant. AC INI-Param: ENABLESEMIATTENDEDTRANSFER
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscHookFlashCodeIP 9.1.5003.9.10.3.1.1.11.16
The string represent HookFlash, when reported to or from IP. Currently used in H.323 only (H245UserOutput, H245Signal or Q931UserInfo). Access: Instant. AC INI-Param: HookFlashCodeIP
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..25)  

miscEnableFaxRerouting 9.1.5003.9.10.3.1.1.11.17
Enable rerouting of FAX calls to FAX destination. Access: Instant. AC INI-Param: ENABLEFAXREROUTING
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscT38MaxDatagramSize 9.1.5003.9.10.3.1.1.11.18
T.38 coder - Max Datagram Size. Access: Instant. AC INI-Param: T38MAXDATAGRAMSIZE
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 122..1024  

miscIsdnDisconnectOnBusyTone 9.1.5003.9.10.3.1.1.11.19
1 - Release call if gateway receives busy or fast busy tone. 0 - don't release. Access: Instant. AC INI-Param: ISDNDISCONNECTONBUSYTONE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscFaxCNGMode 9.1.5003.9.10.3.1.1.11.20
Enables sending of ReInvite on detection of FAX CNG tone when CNGDetectorMode=1. Access: Instant. AC INI-Param: FAXCNGMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscGracefulBusyOutTimeout 9.1.5003.9.10.3.1.1.11.21
Graceful Busy Out Timeout in seconds. Sets the time before a busy out signal will be sent to a trunk even if there are still active calls on the trunk. Access: Instant. AC INI-Param: GRACEFULBUSYOUTTIMEOUT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3600  

miscT38FaxMaxBufferSize 9.1.5003.9.10.3.1.1.11.22
Defines the fax max buffer size in T38 SDP negotiation. Access: Instant. AC INI-Param: T38FAXMAXBUFFERSIZE
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 100..1024  

miscReliableConnectionPersistentMode 9.1.5003.9.10.3.1.1.11.23
if set to 1 - All TCP/TLS connections will be set as persistent and will not be released. Access: Instant. AC INI-Param: RELIABLECONNECTIONPERSISTENTMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscWANIPAddress 9.1.5003.9.10.3.1.1.11.24
Sets the WAN address to be used by VOIP signalling applications. Range = IPv4 address in dotted decimal notation xxx.xxx.xxx.xxx Default = 0.0.0.0. Access: Instant. AC INI-Param: WANIPAddress
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

miscEnableDelayedOffer 9.1.5003.9.10.3.1.1.11.25
Send INVITE message with/without sdp offer. [0] - (default) means SDP will be offered in the INVITE message. [1] - means SDP will be offered by the other side in the first reliable response(1xx or 200 OK INVITE). Access: Instant. AC INI-Param: ENABLEDELAYEDOFFER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscEnableNRTSubscription 9.1.5003.9.10.3.1.1.11.26
Enable subscription for Call forward ringtone Indicator service. Access: Instant. AC INI-Param: ENABLENRTSUBSCRIPTION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscASSubscribeIPGroupID 9.1.5003.9.10.3.1.1.11.27
IPGroup ID for AS server subscribe purposes. Access: Instant. AC INI-Param: ASSUBSCRIBEIPGROUPID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..65525  

miscNRTSubscriptionRetryTime 9.1.5003.9.10.3.1.1.11.28
NRT service subscription retry time after last subscription failure (in seconds). Access: Instant. AC INI-Param: NRTSUBSCRIBERETRYTIME
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2000000  

miscCallForwardRingToneID 9.1.5003.9.10.3.1.1.11.29
Ringtone type for Call forward notification. Access: Instant. AC INI-Param: CALLFORWARDRINGTONEID
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65525  

miscKeyCallPickup 9.1.5003.9.10.3.1.1.11.30
Keying sequence for performing call pickup. Access: Instant. AC INI-Param: KEYCALLPICKUP
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

miscEnableRFC4117Transcoding 9.1.5003.9.10.3.1.1.11.31
Enable transcoding call RFC4117. Access: Offline. AC INI-Param: ENABLERFC4117TRANSCODING
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscEnableSingleDSPTranscoding 9.1.5003.9.10.3.1.1.11.32
Enable/Disable using single DSP for g711 <--> LBR coder. Access: Instant. AC INI-Param: ENABLESINGLEDSPTRANSCODING
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscEnableNetworkISDNTransfer 9.1.5003.9.10.3.1.1.11.33
if set to 0 reject ISDN transfer request. Access: Instant. AC INI-Param: ENABLENETWORKISDNTRANSFER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

miscLDAPocsNumberAttributeName 9.1.5003.9.10.3.1.1.11.34
The name of the attribute which represents the user OCS number in the Microsoft AD data base. Access: Instant. AC INI-Param: MSLDAPOCSNUMATTRIBUTENAME
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..48)  

miscLDAPpbxNumberAttributeName 9.1.5003.9.10.3.1.1.11.35
The name of the attribute which represents the user PBX number in the Microsoft AD data base. Access: Instant. AC INI-Param: MSLDAPPBXNUMATTRIBUTENAME
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..48)  

miscLDAPMobileNumberAttributeName 9.1.5003.9.10.3.1.1.11.36
The name of the attribute which represents the user Mobile number in the Microsoft AD data base. Access: Instant. AC INI-Param: MSLDAPMOBILENUMATTRIBUTENAME
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..48)  

resourceManagement 9.1.5003.9.10.3.1.1.12
OBJECT IDENTIFIER    

resourceManagementMaxActiveCalls 9.1.5003.9.10.3.1.1.12.1
Limit the number of calls that the gateway can handle at the same time. Access: Instant. AC INI-Param: MAXACTIVECALLS
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..2016  

resourceManagementIsSelfCheckAuditUsed 9.1.5003.9.10.3.1.1.12.2
defines whether the resources self check audit is used. Access: Instant. AC INI-Param: ISSELFCHECKAUDITUSED
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

resourceManagementRejectCallsOnOverload 9.1.5003.9.10.3.1.1.12.3
Defines whether new calls will be rejected during overload period. Access: Instant. AC INI-Param: REJECTCALLSONOVERLOAD
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

resourceManagementDisconnectOnBrokenConnection 9.1.5003.9.10.3.1.1.12.4
Disconnect calls on receiving RTP broken notification. Access: Instant. AC INI-Param: DISCONNECTONBROKENCONNECTION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

resourceManagementMaxCallDuration 9.1.5003.9.10.3.1.1.12.5
Limit the call time duration (minutes) 0 = no limit. Access: Instant. AC INI-Param: MAXCALLDURATION
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..35791  

resourceManagementOverloadSensitivityLevel 9.1.5003.9.10.3.1.1.12.6
Defines when to enter overload state: 0:never 1:on very high utilization 2:on medium utilization. Access: Instant. AC INI-Param: OverloadSensitivityLevel
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER never(0), highUtil(1), medUtil(2)  

aMD 9.1.5003.9.10.3.1.1.13
OBJECT IDENTIFIER    

aMDTimeOut 9.1.5003.9.10.3.1.1.13.1
Amd Detection Timeout . Access: Instant. AC INI-Param: AMDTIMEOUT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..30000  

aaa 9.1.5003.9.10.3.1.1.14
OBJECT IDENTIFIER    

aaaIndications 9.1.5003.9.10.3.1.1.14.1
Which Authentication, Authorization and Accounting indications to use. Access: Instant. AC INI-Param: AAAINDICATIONS
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), authorizeAndAuthenticate(1), fullReport(2), accountingOnly(3)  

aaaRadiusAccountingType 9.1.5003.9.10.3.1.1.14.2
When will Radius Acounting messages be sent. Access: Instant. AC INI-Param: RADIUSACCOUNTINGTYPE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER release(0), connectAndRelease(1), setupAndRelease(2)  

profile 9.1.5003.9.10.3.1.1.15
OBJECT IDENTIFIER    

iPProfileTable 9.1.5003.9.10.3.1.1.15.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IPProfileEntry

iPProfileEntry 9.1.5003.9.10.3.1.1.15.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  IPProfileEntry  

iPProfileIndex 9.1.5003.9.10.3.1.1.15.21.1.1
Entry number, starting at 1. AC INI-Param: IpProfile_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..9  

iPProfileRowStatus 9.1.5003.9.10.3.1.1.15.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

iPProfileAction 9.1.5003.9.10.3.1.1.15.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

iPProfileActionResult 9.1.5003.9.10.3.1.1.15.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

iPProfilePreference 9.1.5003.9.10.3.1.1.15.21.1.5
Preference. Access: Instant. AC INI-Param: IpProfile_IpPreference
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..20  

iPProfileProfileName 9.1.5003.9.10.3.1.1.15.21.1.6
Profile Name. Access: Instant. AC INI-Param: IpProfile_ProfileName
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..19)  

iPProfileCodersGroupID 9.1.5003.9.10.3.1.1.15.21.1.7
Coders Group ID. Access: Instant. AC INI-Param: IpProfile_CodersGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4  

iPProfileFaxTransportMode 9.1.5003.9.10.3.1.1.15.21.1.8
Fax Transport Mode. Access: Instant. AC INI-Param: N/A
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3  

iPProfileIsFaxUsed 9.1.5003.9.10.3.1.1.15.21.1.9
Use H.323/Annex D procedure for real time FAX relay. To use this feature, disable inband DTMF by setting the FaxTransportMode to 1. Access: Instant. AC INI-Param: IpProfile_IsFaxUsed
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER noFax(0), t38(1), g711(2), fallBack(3), notConfigured(255)  

iPProfileDJBufMinDelay 9.1.5003.9.10.3.1.1.15.21.1.10
Dynamic Jitter Buffer Minimum Delay (msec). Access: Instant. AC INI-Param: IpProfile_JitterBufMinDelay
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

iPProfileDJBufOptFactor 9.1.5003.9.10.3.1.1.15.21.1.11
Dynamic jitter buffer frame error/delay optimization. Access: Instant. AC INI-Param: IpProfile_JitterBufOptFactor
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

iPProfileIPDiffServ 9.1.5003.9.10.3.1.1.15.21.1.12
IP DiffServ byte value. Access: Instant. AC INI-Param: IpProfile_IPDiffServ
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

iPProfileSigIPDiffServ 9.1.5003.9.10.3.1.1.15.21.1.13
Type Of Service bits in IP header of signalling messages. Access: Instant. AC INI-Param: IpProfile_SigIPDiffServ
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

iPProfileSCE 9.1.5003.9.10.3.1.1.15.21.1.14
Silence Suppression mode. Access: Instant. AC INI-Param: IpProfile_SCE
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), enableWithoutAdaptation(2), notConfigured(255)  

iPProfileRTPRedundancyDepth 9.1.5003.9.10.3.1.1.15.21.1.15
Enables or disables generation of RFC 2198 redundancy packets. Access: Instant. AC INI-Param: IpProfile_RTPRedundancyDepth
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

iPProfileRemoteBaseUDPPort 9.1.5003.9.10.3.1.1.15.21.1.16
Remote Base UDP Port For Aggregation. Access: Instant. AC INI-Param: IpProfile_RemoteBaseUDPPort
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

iPProfileCngDetectorMode 9.1.5003.9.10.3.1.1.15.21.1.17
Access: Instant. AC INI-Param: IpProfile_CNGmode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), relay(1), eventsOnly(2), notConfigured(255)  

iPProfileVxxModemTransportType 9.1.5003.9.10.3.1.1.15.21.1.18
Access: Instant. AC INI-Param: IpProfile_VxxTransportType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enableRelay(1), enableBypass(2), eventsOnly(3), notConfigured(255)  

iPProfileNSEMode 9.1.5003.9.10.3.1.1.15.21.1.19
Access: Instant. AC INI-Param: IpProfile_NSEMode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), notConfigured(255)  

iPProfilePlayRingbackToneToIP 9.1.5003.9.10.3.1.1.15.21.1.20
Access: Instant. AC INI-Param: IpProfile_PlayRBTone2IP
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notPlay(0), play(1), notConfigured(255)  

iPProfileEnableEarlyMedia 9.1.5003.9.10.3.1.1.15.21.1.21
Access: Instant. AC INI-Param: IpProfile_EnableEarlyMedia
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), notConfigured(255)  

iPProfileProgressIndicatorToIP 9.1.5003.9.10.3.1.1.15.21.1.22
Access: Instant. AC INI-Param: IpProfile_ProgressIndicator2IP
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER noPI(0), pI1(1), pI8(8), notConfigured(255)  

iPProfileECE 9.1.5003.9.10.3.1.1.15.21.1.23
Enables or disables the echo canceler. Access: Instant. AC INI-Param: IpProfile_EnableEchoCanceller
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), disable(0), enable(1)  

iPProfileMediaSecurityBehavior 9.1.5003.9.10.3.1.1.15.21.1.24
Access: Instant. AC INI-Param: IpProfile_MediaSecurityBehaviour
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), preferable(0), mandatory(1)  

iPProfileCallLimit 9.1.5003.9.10.3.1.1.15.21.1.25
Access: Instant. AC INI-Param: IpProfile_CallLimit
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..200000  

iPProfileDisconnectOnBrokenConnection 9.1.5003.9.10.3.1.1.15.21.1.26
Access: Instant. AC INI-Param: IpProfile_DisconnectOnBrokenConnection
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), no(0), yes(1)  

iPProfileCopyDest2RedirectNumber 9.1.5003.9.10.3.1.1.15.21.1.27
Access: Instant. AC INI-Param: IpProfile_CopyDest2RedirectNumber
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), disable(0), afterManipulation(1), beforeManipulation(2)  

iPProfileAddIEInSetup 9.1.5003.9.10.3.1.1.15.21.1.28
Access: Instant. AC INI-Param: IpProfile_AddIEInSetup
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..98)  

iPProfileRxDTMFOption 9.1.5003.9.10.3.1.1.15.21.1.29
Access: Instant. AC INI-Param: IpProfile_RxDTMFOption
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), notDeclared(0), declareRFC2833InSDP(1)  

iPProfileFirstTxDtmfOption 9.1.5003.9.10.3.1.1.15.21.1.30
Access: Instant. AC INI-Param: IpProfile_FirstTxDtmfOption
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), notSupported(0), infoNortel(1), notify(2), infoCisco(3), rFC2833(4), infoKorea(5)  

iPProfileSecondTxDtmfOption 9.1.5003.9.10.3.1.1.15.21.1.31
Access: Instant. AC INI-Param: IpProfile_SecondTxDtmfOption
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), notSupported(0), infoNortel(1), notify(2), infoCisco(3), rFC2833(4), infoKorea(5)  

iPProfileMediaIPVersionPreference 9.1.5003.9.10.3.1.1.15.21.1.32
Access: Instant. AC INI-Param: IpProfile_MediaIPVersionPreference
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), onlyIPv4(0), onlyIPv6(1), preferIPv4(2), preferIPv6(3)  

iPProfileSBCAllowedCodersGroupID 9.1.5003.9.10.3.1.1.15.21.1.33
Access: Instant. AC INI-Param: IpProfile_SBCAllowedCodersGroupID
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), codersGroup0(0), codersGroup1(1), codersGroup2(2), codersGroup3(3), codersGroup4(4)  

iPProfileSBCAllowedCodersMode 9.1.5003.9.10.3.1.1.15.21.1.34
Access: Instant. AC INI-Param: IpProfile_SBCAllowedCodersMode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER restriction(0), preference(1), restictionAndPreference(2)  

iPProfileSBCMediaSecurityBehaviour 9.1.5003.9.10.3.1.1.15.21.1.35
Access: Instant. AC INI-Param: IpProfile_SBCMediaSecurityBehaviour
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER asIs(0), srtp(1), rtp(2), both(3)  

telProfileTable 9.1.5003.9.10.3.1.1.15.22
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProfileEntry

telProfileEntry 9.1.5003.9.10.3.1.1.15.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TelProfileEntry  

telProfileIndex 9.1.5003.9.10.3.1.1.15.22.1.1
Entry number, starting at 1. AC INI-Param: TelProfile_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..9  

telProfileRowStatus 9.1.5003.9.10.3.1.1.15.22.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

telProfileAction 9.1.5003.9.10.3.1.1.15.22.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

telProfileActionResult 9.1.5003.9.10.3.1.1.15.22.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

telProfilePreference 9.1.5003.9.10.3.1.1.15.22.1.5
Preference. Access: Instant. AC INI-Param: TelProfile_TelPreference
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..20  

telProfileProfileName 9.1.5003.9.10.3.1.1.15.22.1.6
Profile Name. Access: Instant. AC INI-Param: TelProfile_ProfileName
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..19)  

telProfileCodersGroupID 9.1.5003.9.10.3.1.1.15.22.1.7
Coders Group ID. Access: Instant. AC INI-Param: TelProfile_CodersGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4  

telProfileFaxTransportMode 9.1.5003.9.10.3.1.1.15.22.1.8
Fax Transport Mode. Access: Instant. AC INI-Param: N/A
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3  

telProfileIsFaxUsed 9.1.5003.9.10.3.1.1.15.22.1.9
Use H.323/Annex D procedure for real time FAX relay. To use this feature, disable inband DTMF by setting the FaxTransportMode to 1.0 - No fax , 1- T.38 , 2- Fax Fallback (G.711 with optimization). Access: Instant. AC INI-Param: TelProfile_IsFaxUsed
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER noFax(0), t38(1), g711(2), fallBack(3), notConfigured(255)  

telProfileDJBufMinDelay 9.1.5003.9.10.3.1.1.15.22.1.10
Dynamic Jitter Buffer Minimum Delay (msec). Access: Instant. AC INI-Param: TelProfile_JitterBufMinDelay
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

telProfileDJBufOptFactor 9.1.5003.9.10.3.1.1.15.22.1.11
Dynamic jitter buffer frame error/delay optimization. Access: Instant. AC INI-Param: TelProfile_JitterBufOptFactor
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

telProfileIPDiffServ 9.1.5003.9.10.3.1.1.15.22.1.12
IP DiffServ byte value. Access: Instant. AC INI-Param: TelProfile_IPDiffServ
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

telProfileSigIPDiffServ 9.1.5003.9.10.3.1.1.15.22.1.13
Type Of Service bits in IP header of signalling messages. Access: Instant. AC INI-Param: TelProfile_SigIPDiffServ
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

telProfileVoiceVolume 9.1.5003.9.10.3.1.1.15.22.1.14
Voice Volume. Access: Instant. AC INI-Param: TelProfile_VoiceVolume
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -32..255  

telProfileDTMFVolume 9.1.5003.9.10.3.1.1.15.22.1.15
DTMF Volume. Access: Instant. AC INI-Param: TelProfile_DtmfVolume
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -31..255  

telProfileInputGain 9.1.5003.9.10.3.1.1.15.22.1.16
Input Gain. Access: Instant. AC INI-Param: TelProfile_InputGain
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -32..255  

telProfileEnableReversalPolarity 9.1.5003.9.10.3.1.1.15.22.1.17
FXO: Connect/Disconnect calls upon detection of polarity reversal signal. FXS: generate the signal. Access: Instant. AC INI-Param: TelProfile_EnableReversePolarity
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER no(0), yes(1), notConfigured(255)  

telProfileEnableCurrentDisconnect 9.1.5003.9.10.3.1.1.15.22.1.18
Disconnect call upon detection of current disconnect signal. Access: Instant. AC INI-Param: TelProfile_EnableCurrentDisconnect
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER no(0), yes(1), notConfigured(255)  

telProfileEnableDigitDelivery 9.1.5003.9.10.3.1.1.15.22.1.19
Enables Digit delivery to TEL side. Access: Instant. AC INI-Param: TelProfile_EnableDigitDelivery
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), notConfigured(255)  

telProfileECE 9.1.5003.9.10.3.1.1.15.22.1.20
Enables or disables the echo canceler. Access: Instant. AC INI-Param: TelProfile_EnableEC
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), notConfigured(255)  

telProfileMWIanalogLamp 9.1.5003.9.10.3.1.1.15.22.1.21
Enable MWI support using an analog lamp (110 Volt). Access: Instant. AC INI-Param: TelProfile_MWIAnalog
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), notConfigured(255)  

telProfileMWIDisplay 9.1.5003.9.10.3.1.1.15.22.1.22
Enable MWI support using Caller ID interface. Access: Instant. AC INI-Param: TelProfile_MWIDisplay
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), notConfigured(255)  

telProfileMaxFlashHookDetectionPeriod 9.1.5003.9.10.3.1.1.15.22.1.23
Access: Instant. AC INI-Param: TelProfile_FlashHookPeriod
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2000  

telProfileEnableEarlyMedia 9.1.5003.9.10.3.1.1.15.22.1.24
Enable Early Media. Access: Instant. AC INI-Param: TelProfile_EnableEarlyMedia
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), notConfigured(255)  

telProfileProgressIndicatorToIP 9.1.5003.9.10.3.1.1.15.22.1.25
Determine whether to send the Progress Indicator to IP. Access: Instant. AC INI-Param: TelProfile_ProgressIndicator2IP
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER noPI(0), pI1(1), pI8(8), notConfigured(255)  

telProfileTimeForReorderTone 9.1.5003.9.10.3.1.1.15.22.1.26
Duration of reorder tone playing before FXO releases line. Access: Instant. AC INI-Param: TelProfile_TimeForReorderTone
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

telProfileEnableDIDWink 9.1.5003.9.10.3.1.1.15.22.1.27
Access: Instant. AC INI-Param: TelProfile_EnableDIDWink
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), disable(0), enable(1)  

telProfileIsTwoStageDial 9.1.5003.9.10.3.1.1.15.22.1.28
Access: Instant. AC INI-Param: TelProfile_IsTwoStageDial
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), disable(0), enable(1)  

telProfileDisconnectOnBusyTone 9.1.5003.9.10.3.1.1.15.22.1.29
Access: Instant. AC INI-Param: TelProfile_DisconnectOnBusyTone
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), no(0), yes(1)  

telProfileEnableVoiceMailDelay 9.1.5003.9.10.3.1.1.15.22.1.30
Access: Instant. AC INI-Param: TelProfile_EnableVoiceMailDelay
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), disable(0), enable(1)  

telProfileDialPlanIndex 9.1.5003.9.10.3.1.1.15.22.1.31
Defines the plan index to be used from the external Dial Plan file. Access: Instant. AC INI-Param: TelProfile_DialPlanIndex
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..7  

telProfileEnable911PSAP 9.1.5003.9.10.3.1.1.15.22.1.32
GwApp Tel Profile Table. Access: Instant. AC INI-Param: TelProfile_Enable911PSAP
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), disable(0), enable(1)  

telProfileSwapTelToIpPhoneNumbers 9.1.5003.9.10.3.1.1.15.22.1.33
GwApp Tel Profile Table. Access: Instant. AC INI-Param: TelProfile_SwapTelToIpPhoneNumbers
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), disable(0), enable(1)  

telProfileEnableAGC 9.1.5003.9.10.3.1.1.15.22.1.34
Access: Instant. AC INI-Param: TelProfile_EnableAGC
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), disable(0), enable(1)  

telProfileECNlpMode 9.1.5003.9.10.3.1.1.15.22.1.35
Access: Instant. AC INI-Param: TelProfile_ECNlpMode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), adaptiveNLP(0), disabledNLP(1), silenceOutputNLP(2)  

voiceMail 9.1.5003.9.10.3.1.1.16
OBJECT IDENTIFIER    

voiceMailLineTransferMode 9.1.5003.9.10.3.1.1.16.1
LineTransferMode: 0-ip 1-pbx blind transfer 2-pbx semi supv transfer 3-supervised transfer (also known as warm transfer). (in TP, feature key and parameter EnableIPMDetectors needed). Access: Instant. AC INI-Param: LineTransferMode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ip(0), pbxblindtransfer(1), pbxsemisupervised(2), pbxsupervisedtransfer(3)  

voiceMailInterface 9.1.5003.9.10.3.1.1.16.2
Selects the method of communication between PBX and the Gateway, that is used instead of legacy voicemail. Access: Instant. AC INI-Param: VoiceMailInterface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), dtmf(1), smdi(2), qsig(3), isdnsetup(4)  

digitalGWext 9.1.5003.9.10.3.1.1.17
OBJECT IDENTIFIER    

digitalGWextEnableQSIGTunneling 9.1.5003.9.10.3.1.1.17.1
Enables QSIG Tunneling over SIP. Access: Instant. AC INI-Param: ENABLEQSIGTUNNELING
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

digitalGWextRemoveCLIWhenRestricted 9.1.5003.9.10.3.1.1.17.2
Removes CLI from IP->TEL calls if received CLI is restricted. Access: Instant. AC INI-Param: REMOVECLIWHENRESTRICTED
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

digitalGWextDefaultCauseMapISDN2IP 9.1.5003.9.10.3.1.1.17.3
All ISDN release causes except normal, busy, no user responding, and no answer will be mapped to this cause, if set. Access: Instant. AC INI-Param: DEFAULTCAUSEMAPISDN2IP
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..127  

digitalGWextISDNSubaddressFormat 9.1.5003.9.10.3.1.1.17.4
ISDN SubAdress format. Access: Instant. AC INI-Param: ISDNSUBADDRESSFORMAT
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ascii(0), bcd(1), userSpecified(2)  

digitalGWextEnableAoC 9.1.5003.9.10.3.1.1.17.5
Enable AoC-D and AoC-E from ISDN to SIP. Access: Instant. AC INI-Param: ENABLEAOC
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

digitalGWextRemoveCallingName 9.1.5003.9.10.3.1.1.17.6
If set to 1 - Removes Calling Name from IP->TEL calls. Access: Instant. AC INI-Param: REMOVECALLINGNAME
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

digitalGWextCopyDest2RedirectNumber 9.1.5003.9.10.3.1.1.17.7
0 - Redirect N not affected,1- Called N after manipulation from TEL2IP call will also be used as Redirect N,2 - the Called N before manipulation - as Redirect N. Access: Instant. AC INI-Param: COPYDEST2REDIRECTNUMBER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), afterManipulation(1), beforeManipulation(2)  

digitalGWextTDMOverIPMinCallsForTrunkActivation 9.1.5003.9.10.3.1.1.17.8
Minimum connected calls for trunk activation while in TDMOverIPMode if 0 - trunk is always active. Access: Instant. AC INI-Param: TDMOVERIPMINCALLSFORTRUNKACTIVATION
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..31  

rtpOnlyModeForTrunkTable 9.1.5003.9.10.3.1.1.17.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtpOnlyModeForTrunkEntry

rtpOnlyModeForTrunkEntry 9.1.5003.9.10.3.1.1.17.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  RtpOnlyModeForTrunkEntry  

rtpOnlyModeForTrunkIndex 9.1.5003.9.10.3.1.1.17.21.1.1
Trunk number. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..84  

rtpOnlyModeForTrunkRtpOnlyModeForTrunk 9.1.5003.9.10.3.1.1.17.21.1.2
immediately. -1 - takes the RTPONLYMODE global value per gatewa 0 - regular call establishment. 1 - The RTP channel open for Rx & Tx. 2-The RTP channel open only for Tx 3 -The RTP channel open only fo Rx. Access: Instant. AC INI-Param: RTPONLYMODEFORTRUNK
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notConfigured(-1), disable(0), transmitReceive(1), transmitOnly(2), receiveOnly(3)  

acBChannelNegotiationForTrunkTable 9.1.5003.9.10.3.1.1.17.22
B-Channel Negotiation for Trunk table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcBChannelNegotiationForTrunkEntry

acBChannelNegotiationForTrunkEntry 9.1.5003.9.10.3.1.1.17.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcBChannelNegotiationForTrunkEntry  

acBChannelNegotiationForTrunkIndex 9.1.5003.9.10.3.1.1.17.22.1.1
Trunk number starting at 0. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..83  

acBChannelNegotiationForTrunkMode 9.1.5003.9.10.3.1.1.17.22.1.2
ISDN B-Channel negotiation mode for trunk put MODE_NOT_SET (-1) to use BCHANNELNEGOTIATION per Gateway. Access: Instant. AC INI-Param: BCHANNELNEGOTIATIONFORTRUNK
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notConfigured(-1), preferred(0), exclusive(1), any(2)  

acDigitalOOSBehaviorForTrunkTable 9.1.5003.9.10.3.1.1.17.23
Digital OOS Behavior for Trunk table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcDigitalOOSBehaviorForTrunkEntry

acDigitalOOSBehaviorForTrunkEntry 9.1.5003.9.10.3.1.1.17.23.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcDigitalOOSBehaviorForTrunkEntry  

acDigitalOOSBehaviorForTrunkIndex 9.1.5003.9.10.3.1.1.17.23.1.1
Trunk number starting at 0. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..83  

acDigitalOOSBehaviorForTrunkValue 9.1.5003.9.10.3.1.1.17.23.1.2
Digital OOS Behavior for trunk put OOS_NOT_SET (-1) to use DIGITALOOSBEHAVIOR per Gateway. Access: Instant. AC INI-Param: DIGITALOOSBEHAVIORFORTRUNK
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notConfigured(-1), default(0), service(1), dChannel(2), alarm(3), block(4)  

acRemoveCallingNameForTrunkTable 9.1.5003.9.10.3.1.1.17.24
Remove Calling Name For Trunk table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcRemoveCallingNameForTrunkEntry

acRemoveCallingNameForTrunkEntry 9.1.5003.9.10.3.1.1.17.24.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcRemoveCallingNameForTrunkEntry  

acRemoveCallingNameForTrunkIndex 9.1.5003.9.10.3.1.1.17.24.1.1
Trunk number starting at 0. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..83  

acRemoveCallingNameForTrunkMode 9.1.5003.9.10.3.1.1.17.24.1.2
Remove Calling Name For Trunk table .Set (-1) to use the global parameter digitalGWextRemoveCallingName. Access: Instant. AC INI-Param: RemoveCallingNameForTrunk
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notConfigured(-1), disable(0), enable(1)  

gwSecurity 9.1.5003.9.10.3.1.1.18
OBJECT IDENTIFIER    

gwSecurityMediaSecurityBehavior 9.1.5003.9.10.3.1.1.18.1
Gateway behavior when recieving offer/response for media encryption. Access: Instant. AC INI-Param: MEDIASECURITYBEHAVIOUR
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mandatory(1), preferable(0)  

gwSecuritySIPSRequireClientCertificate 9.1.5003.9.10.3.1.1.18.2
Should require client certificate upon TLS connection request arrival. Access: Offline. AC INI-Param: SIPSREQUIRECLIENTCERTIFICATE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

gwSecurityTLSReHandshakeInterval 9.1.5003.9.10.3.1.1.18.3
The interval between consequent TLS re-handshakes (Minutes). 0 - Disables re-handshakes. Access: Instant. AC INI-Param: TLSREHANDSHAKEINTERVAL
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1500  

gwSecurityPeerHostNameVerificationMode 9.1.5003.9.10.3.1.1.18.4
While using TLS, defines the verification behavior of the host name sent in the certificate. Access: Instant. AC INI-Param: PEERHOSTNAMEVERIFICATIONMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), serverOnly(1), serverAndClient(2)  

gwSecurityVerifyServerCertificate 9.1.5003.9.10.3.1.1.18.5
Certificate validation behavior 0 - No certificate validation. 1 - Server certificate validation. Access: Instant. AC INI-Param: VERIFYSERVERCERTIFICATE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

gwSecurityTLSRemoteSubjectName 9.1.5003.9.10.3.1.1.18.6
used to verify the remote peer Common Name (at certificate) when using TLS. Access: Instant. AC INI-Param: TLSREMOTESUBJECTNAME
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

gwSecuritySRTPofferedSuites 9.1.5003.9.10.3.1.1.18.7
Offered SRTP Cipher Suites. Access: Instant. AC INI-Param: SRTPOFFEREDSUITES
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(0), aesCm128HmacShaOne80(1), aesCm128HmacShaOne32(2)  

acGWRtcpXr 9.1.5003.9.10.3.1.1.19
OBJECT IDENTIFIER    

acGWRtcpXrEscIP 9.1.5003.9.10.3.1.1.19.1
RTCP-XR server IP address. Access: Instant. AC INI-Param: RtcpXrEscIP
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..48)  

acGWRtcpXrReportMode 9.1.5003.9.10.3.1.1.19.2
0:rtcpxr is not sent over SIP at all 1:rtcpxr is sent over sip when call ended 2:rtcpxr is sent over sip when on periodic interval and when call ended . Access: Instant. AC INI-Param: RtcpXrReportMode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), endCall(1), endCallPeriodic(2)  

acGWRtcpXrEscTransportType 9.1.5003.9.10.3.1.1.19.3
RtcpXrEsc transport type. Access: Instant. AC INI-Param: RTCPXRESCTRANSPORTTYPE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notConfigured(-1), uDP(0), tCP(1), tLS(2)  

acTimers 9.1.5003.9.10.3.1.1.20
OBJECT IDENTIFIER    

acTimersIPAlertTimeout 9.1.5003.9.10.3.1.1.20.1
Maximal time to wait for connect from IP (seconds). Access: Instant. AC INI-Param: IPALERTTIMEOUT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3600  

acTimersPSTNAlertTimeout 9.1.5003.9.10.3.1.1.20.2
Max time (in seconds) to wait for connect from PSTN. Access: Instant. AC INI-Param: PSTNALERTTIMEOUT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..600  

acEmergency 9.1.5003.9.10.3.1.1.21
OBJECT IDENTIFIER    

acEmergencyRegretTimeout 9.1.5003.9.10.3.1.1.21.1
[min] Regret time for call that is marked as Emergency. Access: Instant. AC INI-Param: EmergencyRegretTimeout
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..30  

acEmergencyNumbersTable 9.1.5003.9.10.3.1.1.21.21
Emergency numbers table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcEmergencyNumbersEntry

acEmergencyNumbersEntry 9.1.5003.9.10.3.1.1.21.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcEmergencyNumbersEntry  

acEmergencyNumbersIndex 9.1.5003.9.10.3.1.1.21.21.1.1
Emergency numbers, starting at 0. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..3  

acEmergencyNumbersNumbers 9.1.5003.9.10.3.1.1.21.21.1.2
Emergency numbers. Access: Instant. AC INI-Param: EmergencyNumbers
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..4)  

vmDigitPattern 9.1.5003.9.10.3.1.1.16.20
OBJECT IDENTIFIER    

vmDigitPatternNoReason 9.1.5003.9.10.3.1.1.16.20.1
Digit pattern used to indicate Call Forward with no reason (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardNoReason
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..119)  

vmDigitPatternOnBusy 9.1.5003.9.10.3.1.1.16.20.2
Digit pattern used to indicate Call Forward on busy (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnBusy
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..119)  

vmDigitPatternOnNoAnswer 9.1.5003.9.10.3.1.1.16.20.3
Digit pattern used to indicate Call Forward on no answer (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnNoAnswer
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..119)  

vmDigitPatternOnDND 9.1.5003.9.10.3.1.1.16.20.4
Digit pattern used to indicate Call Forward on Do Not Disturb (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnDND
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..119)  

vmDigitPatternInternalCall 9.1.5003.9.10.3.1.1.16.20.5
Digit pattern used to indicate internal call (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternInternalCall
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..119)  

vmDigitPatternExternalCall 9.1.5003.9.10.3.1.1.16.20.6
Digit pattern used to indicate external call (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternExternalCall
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..119)  

vmDigitPatternDisconnectCode 9.1.5003.9.10.3.1.1.16.20.7
Disconnect call if digit string is received from the TEL side during session. Access: Instant. AC INI-Param: TelDisconnectCode
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..24)  

vmDigitPatternConnectCode 9.1.5003.9.10.3.1.1.16.20.8
Play Code string to Tel side when connect message recieved from IP side. Access: Instant. AC INI-Param: TELCONNECTCODE
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..8)  

vmDigitPatternVmDigitPatternOnBusyExternal 9.1.5003.9.10.3.1.1.16.20.9
Digit pattern used to indicate Call Forward on busy (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnBusyExt
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..119)  

vmDigitPatternVmDigitPatternOnNoAnswerExternal 9.1.5003.9.10.3.1.1.16.20.10
Digit pattern used to indicate Call Forward on no answer (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnNoAnswerExt
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..119)  

vmDigitPatternVmDigitPatternOnDNDExternal 9.1.5003.9.10.3.1.1.16.20.11
Digit pattern used to indicate Call Forward on Do Not Disturb (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnDNDExt
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..119)  

vmDigitPatternVmDigitPatternNoReasonExternal 9.1.5003.9.10.3.1.1.16.20.12
Digit pattern used to indicate Call Forward with no reason (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardNoReasonExt
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..119)  

vmDigitPatternDigitToIgnore 9.1.5003.9.10.3.1.1.16.20.13
A digit (0-9,A-D,* or #) that if received as Src (S) or Redirect (R), the digit is ignored and not added to that number. Used in DTMF VoiceMail. Access: Instant. AC INI-Param: DigitPatternDigitToIgnore
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..119)  

vmMWI 9.1.5003.9.10.3.1.1.16.21
OBJECT IDENTIFIER    

vmMWIOnCode 9.1.5003.9.10.3.1.1.16.21.1
Digit pattern used to notify PBX about messages waiting for extension (added as prefix). Access: Instant. AC INI-Param: MWIOnCode
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..25)  

vmMWIOffCode 9.1.5003.9.10.3.1.1.16.21.2
Digit pattern used to notify PBX about no messages waiting for extension (added as prefix). Access: Instant. AC INI-Param: MWIOffCode
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..25)  

vmMWISuffixCode 9.1.5003.9.10.3.1.1.16.21.3
MWI suffix code used to notify PBX about messages waiting for extension (added as suffix to the extention number). Access: Instant. AC INI-Param: MWISuffixCode
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..25)  

vmMWISourceNumber 9.1.5003.9.10.3.1.1.16.21.4
The phone number sent as source number toward PSTN for MWI setup. Access: Instant. AC INI-Param: MWISOURCENUMBER
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..119)  

vmSMDI 9.1.5003.9.10.3.1.1.16.22
OBJECT IDENTIFIER    

vmSMDIEnable 9.1.5003.9.10.3.1.1.16.22.1
Enables the Simplified Message Desk Interface (SMDI). SMDI defines a method whereby telephony systems can provide voice-messaging systems with data required by those telephony systems to process incoming calls intelligently. Whenever the phone system routes a call, it sends an SMDI message through an EIA/TIA-232 connection to the voice-messaging system that tells it the line that it is using, the type of call that it is forwarding, and information about the source and destination of the call. 0 = Normal Serial 1 = Serial SMDI. Access: Offline. AC INI-Param: SMDI
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

vmSMDITimeOut 9.1.5003.9.10.3.1.1.16.22.2
Time out for: 1. From SMDI Info until SETUP 2. From SETUP until SMDI event. Access: Instant. AC INI-Param: SMDITimeOut
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..120000  

accounts 9.1.5003.9.10.3.1.1.22
OBJECT IDENTIFIER    

accountTable 9.1.5003.9.10.3.1.1.22.21
GwApp Accounts table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccountEntry

accountEntry 9.1.5003.9.10.3.1.1.22.21.1
table
Status: current Access: not-accessible
OBJECT-TYPE    
  AccountEntry  

accountIndex 9.1.5003.9.10.3.1.1.22.21.1.1
. AC INI-Param: Account_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..20  

accountRowStatus 9.1.5003.9.10.3.1.1.22.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

accountAction 9.1.5003.9.10.3.1.1.22.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

accountActionResult 9.1.5003.9.10.3.1.1.22.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

accountServedTrunkGroup 9.1.5003.9.10.3.1.1.22.21.1.5
GwApp Accounts table. Access: Instant. AC INI-Param: Account_ServedTrunkGroup
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..100  

accountServedIPGroup 9.1.5003.9.10.3.1.1.22.21.1.6
GwApp Accounts table. Access: Instant. AC INI-Param: Account_ServedIPGroup
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

accountServingIPGroup 9.1.5003.9.10.3.1.1.22.21.1.7
GwApp Accounts table. Access: Instant. AC INI-Param: Account_ServingIPGroup
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

accountUsername 9.1.5003.9.10.3.1.1.22.21.1.8
GwApp Accounts table. Access: Instant. AC INI-Param: Account_Username
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

accountPassword 9.1.5003.9.10.3.1.1.22.21.1.9
GwApp Accounts table. Access: Instant. AC INI-Param: Account_Password
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

accountHostName 9.1.5003.9.10.3.1.1.22.21.1.10
GwApp Accounts table. Access: Instant. AC INI-Param: Account_HostName
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

accountRegister 9.1.5003.9.10.3.1.1.22.21.1.11
GwApp Accounts table. Access: Instant. AC INI-Param: Account_Register
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

accountContactUser 9.1.5003.9.10.3.1.1.22.21.1.12
GwApp Accounts table. Access: Instant. AC INI-Param: Account_ContactUser
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

ipGroups 9.1.5003.9.10.3.1.1.23
OBJECT IDENTIFIER    

ipGroupTable 9.1.5003.9.10.3.1.1.23.21
GwApp IP Group Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpGroupEntry

ipGroupEntry 9.1.5003.9.10.3.1.1.23.21.1
table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpGroupEntry  

ipGroupIndex 9.1.5003.9.10.3.1.1.23.21.1.1
. AC INI-Param: IPGroup_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..9  

ipGroupRowStatus 9.1.5003.9.10.3.1.1.23.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipGroupAction 9.1.5003.9.10.3.1.1.23.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

ipGroupActionResult 9.1.5003.9.10.3.1.1.23.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

ipGroupType 9.1.5003.9.10.3.1.1.23.21.1.5
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_Type
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER server(0), user(1)  

ipGroupDescription 9.1.5003.9.10.3.1.1.23.21.1.6
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_Description
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..29)  

ipGroupProxySetId 9.1.5003.9.10.3.1.1.23.21.1.7
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_ProxySetId
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..5  

ipGroupSIPGroupName 9.1.5003.9.10.3.1.1.23.21.1.8
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_SIPGroupName
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

ipGroupContactUser 9.1.5003.9.10.3.1.1.23.21.1.9
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_ContactUser
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

ipGroupEnableSurvivability 9.1.5003.9.10.3.1.1.23.21.1.10
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_EnableSurvivability
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enableIfNecessary(1), alwaysEnable(2)  

ipGroupServingIPGroup 9.1.5003.9.10.3.1.1.23.21.1.11
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_ServingIPGroup
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

ipGroupSipReRoutingMode 9.1.5003.9.10.3.1.1.23.21.1.12
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_SipReRoutingMode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), standard(0), proxy(1), routingTable(2)  

ipGroupAlwaysUseRouteTable 9.1.5003.9.10.3.1.1.23.21.1.13
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_AlwaysUseRouteTable
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

ipGroupRoutingMode 9.1.5003.9.10.3.1.1.23.21.1.14
GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_RoutingMode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), useRoutingTable(0), sendToServingIPGroup(1), routeToRequestURI(2)  

ipGroupProfileId 9.1.5003.9.10.3.1.1.23.21.1.15
Access: Instant. AC INI-Param: IPGroup_ProfileId
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..9  

ipGroupMediaRealm 9.1.5003.9.10.3.1.1.23.21.1.16
Access: Instant. AC INI-Param: IPGroup_MediaRealm
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..39)  

ipGroupMaxNumOfRegUsers 9.1.5003.9.10.3.1.1.23.21.1.17
Max Number Of Registered Users. MP1xx - 25 M1K - 200 M2K- 250 M3K - 3000. Access: Offline. AC INI-Param: IPGroup_MaxNumOfRegUsers
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..3000  

sbc 9.1.5003.9.10.3.1.1.24
OBJECT IDENTIFIER    

sbcEnable 9.1.5003.9.10.3.1.1.24.1
Enables SBC functionality. Access: Instant. AC INI-Param: ENABLESBC
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sbcRegistrationTime 9.1.5003.9.10.3.1.1.24.2
Expires value SBC responds to user with. Used when server is offline or when the user is behind NAT. Otherwise expires is defined by the server. Access: Instant. AC INI-Param: SBCREGISTRATIONTIME
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..2000000  

sbcEnableISBCApplication 9.1.5003.9.10.3.1.1.24.3
Enables SBC functionality. Access: Offline. AC INI-Param: ENABLESBCAPPLICATION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sbcEnableIIP2IPApplication 9.1.5003.9.10.3.1.1.24.4
Enables IP2IP functionality. Access: Offline. AC INI-Param: ENABLEIP2IPAPPLICATION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sbcClassificationTable 9.1.5003.9.10.3.1.1.24.21
GwApp Classification Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SbcClassificationEntry

sbcClassificationEntry 9.1.5003.9.10.3.1.1.24.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SbcClassificationEntry  

sbcClassificationIndex 9.1.5003.9.10.3.1.1.24.21.1.1
. AC INI-Param: Classification_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..20  

sbcClassificationRowStatus 9.1.5003.9.10.3.1.1.24.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sbcClassificationAction 9.1.5003.9.10.3.1.1.24.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcClassificationActionResult 9.1.5003.9.10.3.1.1.24.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcClassificationSrcIPGroupId 9.1.5003.9.10.3.1.1.24.21.1.5
Source IP group ID. Access: Instant. AC INI-Param: Classification_SrcIPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

sbcClassificationSrcSRDId 9.1.5003.9.10.3.1.1.24.21.1.6
Source SRD ID. Access: Instant. AC INI-Param: Classification_SrcSRDID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..4  

sbcClassificationSrcAddress 9.1.5003.9.10.3.1.1.24.21.1.7
Source address. Access: Instant. AC INI-Param: Classification_SrcAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

sbcClassificationSrcUsernamePrefix 9.1.5003.9.10.3.1.1.24.21.1.8
Source username prefix. Access: Instant. AC INI-Param: Classification_SrcUsernamePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

sbcClassificationSrcHost 9.1.5003.9.10.3.1.1.24.21.1.9
Source host. Access: Instant. AC INI-Param: Classification_SrcHost
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sbcClassificationDestUsernamePrefix 9.1.5003.9.10.3.1.1.24.21.1.10
Destination username prefix. Access: Instant. AC INI-Param: Classification_DestUsernamePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

sbcClassificationDestHost 9.1.5003.9.10.3.1.1.24.21.1.11
Destination host. Access: Instant. AC INI-Param: Classification_DestHost
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sbcRoutingTable 9.1.5003.9.10.3.1.1.24.22
GwApp SBC Routing Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SbcRoutingEntry

sbcRoutingEntry 9.1.5003.9.10.3.1.1.24.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SbcRoutingEntry  

sbcRoutingIndex 9.1.5003.9.10.3.1.1.24.22.1.1
. AC INI-Param: IP2IPRouting_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..119  

sbcRoutingRowStatus 9.1.5003.9.10.3.1.1.24.22.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sbcRoutingAction 9.1.5003.9.10.3.1.1.24.22.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcRoutingActionResult 9.1.5003.9.10.3.1.1.24.22.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcRoutingSrcIPGroupId 9.1.5003.9.10.3.1.1.24.22.1.5
Source IP group ID. Access: Instant. AC INI-Param: IP2IPRouting_SrcIPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

sbcRoutingSrcUsernamePrefix 9.1.5003.9.10.3.1.1.24.22.1.6
Source username prefix. Access: Instant. AC INI-Param: IP2IPRouting_SrcUsernamePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

sbcRoutingSrcHost 9.1.5003.9.10.3.1.1.24.22.1.7
Source host. Access: Instant. AC INI-Param: IP2IPRouting_SrcHost
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sbcRoutingDestUsernamePrefix 9.1.5003.9.10.3.1.1.24.22.1.8
Destination username prefix. Access: Instant. AC INI-Param: IP2IPRouting_DestUsernamePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

sbcRoutingDestHost 9.1.5003.9.10.3.1.1.24.22.1.9
Destination host. Access: Instant. AC INI-Param: IP2IPRouting_DestHost
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sbcRoutingDestType 9.1.5003.9.10.3.1.1.24.22.1.10
Destination type. Access: Instant. AC INI-Param: IP2IPRouting_DestType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ipGroup(0), dest(1), requestURI(2), enumTranslate(3)  

sbcRoutingDestIPGroupId 9.1.5003.9.10.3.1.1.24.22.1.11
Destination IP group ID. Access: Instant. AC INI-Param: IP2IPRouting_DestIPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

sbcRoutingDestSRDId 9.1.5003.9.10.3.1.1.24.22.1.12
Destination SRD ID. Access: Instant. AC INI-Param: IP2IPRouting_DestSRDID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..4  

sbcRoutingDestAddress 9.1.5003.9.10.3.1.1.24.22.1.13
Destination Address. Access: Instant. AC INI-Param: IP2IPRouting_DestAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

sbcRoutingDestPort 9.1.5003.9.10.3.1.1.24.22.1.14
Destination Port number. Access: Instant. AC INI-Param: IP2IPRouting_DestPort
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65534  

sbcRoutingDestTransportType 9.1.5003.9.10.3.1.1.24.22.1.15
Destination transport type. Access: Instant. AC INI-Param: IP2IPRouting_DestTransportType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notConfigured(-1), udp(0), tcp(1), tls(2)  

sbcRoutingAltRouteOptions 9.1.5003.9.10.3.1.1.24.22.1.16
Alternative Route Options. Access: Instant. AC INI-Param: IP2IPRouting_AltRouteOptions
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER routeRow(0), ignoreInputs(1), considerInputs(2)  

sbcRoutingRequestType 9.1.5003.9.10.3.1.1.24.22.1.17
Request Type. Access: Instant. AC INI-Param: IP2IPRouting_RequestType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER all(0), invite(1), register(2), subscribe(3), inviteAndRegister(4), inviteAndSubscribe(5)  

sbcIP2IPInboundManipulationTable 9.1.5003.9.10.3.1.1.24.23
GwApp IP Inbound Manipulation Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SbcIP2IPInboundManipulationEntry

sbcIP2IPInboundManipulationEntry 9.1.5003.9.10.3.1.1.24.23.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SbcIP2IPInboundManipulationEntry  

sbcIP2IPInboundManipulationIndex 9.1.5003.9.10.3.1.1.24.23.1.1
. AC INI-Param: IPInboundManipulation_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..99  

sbcIP2IPInboundManipulationRowStatus 9.1.5003.9.10.3.1.1.24.23.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sbcIP2IPInboundManipulationAction 9.1.5003.9.10.3.1.1.24.23.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcIP2IPInboundManipulationActionResult 9.1.5003.9.10.3.1.1.24.23.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcIP2IPInboundManipulationIsAdditionalManipulation 9.1.5003.9.10.3.1.1.24.23.1.5
Access: Instant. AC INI-Param: IPInboundManipulation_IsAdditionalManipulation
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sbcIP2IPInboundManipulationManipulatedURI 9.1.5003.9.10.3.1.1.24.23.1.6
Access: Instant. AC INI-Param: IPInboundManipulation_ManipulatedURI
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sbcIP2IPInboundManipulationSrcIPGroupID 9.1.5003.9.10.3.1.1.24.23.1.7
Access: Instant. AC INI-Param: IPInboundManipulation_SrcIPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

sbcIP2IPInboundManipulationSrcUsernamePrefix 9.1.5003.9.10.3.1.1.24.23.1.8
Access: Instant. AC INI-Param: IPInboundManipulation_SrcUsernamePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

sbcIP2IPInboundManipulationSrcHost 9.1.5003.9.10.3.1.1.24.23.1.9
Access: Instant. AC INI-Param: IPInboundManipulation_SrcHost
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sbcIP2IPInboundManipulationDestUsernamePrefix 9.1.5003.9.10.3.1.1.24.23.1.10
Access: Instant. AC INI-Param: IPInboundManipulation_DestUsernamePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

sbcIP2IPInboundManipulationDestHost 9.1.5003.9.10.3.1.1.24.23.1.11
Access: Instant. AC INI-Param: IPInboundManipulation_DestHost
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sbcIP2IPInboundManipulationRemoveFromLeft 9.1.5003.9.10.3.1.1.24.23.1.12
Access: Instant. AC INI-Param: IPInboundManipulation_RemoveFromLeft
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..50  

sbcIP2IPInboundManipulationRemoveFromRight 9.1.5003.9.10.3.1.1.24.23.1.13
Access: Instant. AC INI-Param: IPInboundManipulation_RemoveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..50  

sbcIP2IPInboundManipulationLeaveFromRight 9.1.5003.9.10.3.1.1.24.23.1.14
Access: Instant. AC INI-Param: IPInboundManipulation_LeaveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

sbcIP2IPInboundManipulationPrefix2Add 9.1.5003.9.10.3.1.1.24.23.1.15
Access: Instant. AC INI-Param: IPInboundManipulation_Prefix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sbcIP2IPInboundManipulationSuffix2Add 9.1.5003.9.10.3.1.1.24.23.1.16
Access: Instant. AC INI-Param: IPInboundManipulation_Suffix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sbcIP2IPInboundManipulationRequestType 9.1.5003.9.10.3.1.1.24.23.1.17
Access: Instant. AC INI-Param: IPInboundManipulation_RequestType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER all(0), invite(1), register(2), subscribe(3), inviteAndRegister(4), inviteAndSubscribe(5)  

sbcIP2IPOutboundManipulationTable 9.1.5003.9.10.3.1.1.24.24
GwApp IP Outbound Manipulation Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SbcIP2IPOutboundManipulationEntry

sbcIP2IPOutboundManipulationEntry 9.1.5003.9.10.3.1.1.24.24.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SbcIP2IPOutboundManipulationEntry  

sbcIP2IPOutboundManipulationIndex 9.1.5003.9.10.3.1.1.24.24.1.1
. AC INI-Param: IPOutboundManipulation_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..99  

sbcIP2IPOutboundManipulationRowStatus 9.1.5003.9.10.3.1.1.24.24.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sbcIP2IPOutboundManipulationAction 9.1.5003.9.10.3.1.1.24.24.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcIP2IPOutboundManipulationActionResult 9.1.5003.9.10.3.1.1.24.24.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcIP2IPOutboundManipulationIsAdditionalManipulation 9.1.5003.9.10.3.1.1.24.24.1.5
Access: Instant. AC INI-Param: IPOutboundManipulation_IsAdditionalManipulation
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sbcIP2IPOutboundManipulationManipulatedURI 9.1.5003.9.10.3.1.1.24.24.1.6
Access: Instant. AC INI-Param: IPOutboundManipulation_ManipulatedURI
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sbcIP2IPOutboundManipulationSrcIPGroupID 9.1.5003.9.10.3.1.1.24.24.1.7
Access: Instant. AC INI-Param: IPOutboundManipulation_SrcIPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

sbcIP2IPOutboundManipulationDestIPGroupID 9.1.5003.9.10.3.1.1.24.24.1.8
Access: Instant. AC INI-Param: IPOutboundManipulation_DestIPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

sbcIP2IPOutboundManipulationSrcUsernamePrefix 9.1.5003.9.10.3.1.1.24.24.1.9
Access: Instant. AC INI-Param: IPOutboundManipulation_SrcUsernamePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

sbcIP2IPOutboundManipulationSrcHost 9.1.5003.9.10.3.1.1.24.24.1.10
Access: Instant. AC INI-Param: IPOutboundManipulation_SrcHost
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sbcIP2IPOutboundManipulationDestUsernamePrefix 9.1.5003.9.10.3.1.1.24.24.1.11
Access: Instant. AC INI-Param: IPOutboundManipulation_DestUsernamePrefix
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

sbcIP2IPOutboundManipulationDestHost 9.1.5003.9.10.3.1.1.24.24.1.12
Access: Instant. AC INI-Param: IPOutboundManipulation_DestHost
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sbcIP2IPOutboundManipulationRemoveFromLeft 9.1.5003.9.10.3.1.1.24.24.1.13
Access: Instant. AC INI-Param: IPOutboundManipulation_RemoveFromLeft
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..50  

sbcIP2IPOutboundManipulationRemoveFromRight 9.1.5003.9.10.3.1.1.24.24.1.14
Access: Instant. AC INI-Param: IPOutboundManipulation_RemoveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..50  

sbcIP2IPOutboundManipulationLeaveFromRight 9.1.5003.9.10.3.1.1.24.24.1.15
Access: Instant. AC INI-Param: IPOutboundManipulation_LeaveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

sbcIP2IPOutboundManipulationPrefix2Add 9.1.5003.9.10.3.1.1.24.24.1.16
Access: Instant. AC INI-Param: IPOutboundManipulation_Prefix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sbcIP2IPOutboundManipulationSuffix2Add 9.1.5003.9.10.3.1.1.24.24.1.17
Access: Instant. AC INI-Param: IPOutboundManipulation_Suffix2Add
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sbcIP2IPOutboundManipulationRequestType 9.1.5003.9.10.3.1.1.24.24.1.18
Access: Instant. AC INI-Param: IPOutboundManipulation_RequestType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER all(0), invite(1), register(2), subscribe(3), inviteAndRegister(4), inviteAndSubscribe(5)  

sbcAdmissionControlTable 9.1.5003.9.10.3.1.1.24.25
GwApp SBC SIP Admission Control Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SbcAdmissionControlEntry

sbcAdmissionControlEntry 9.1.5003.9.10.3.1.1.24.25.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SbcAdmissionControlEntry  

sbcAdmissionControlIndex 9.1.5003.9.10.3.1.1.24.25.1.1
. AC INI-Param: SBCAdmissionControl_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..99  

sbcAdmissionControlRowStatus 9.1.5003.9.10.3.1.1.24.25.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sbcAdmissionControlAction 9.1.5003.9.10.3.1.1.24.25.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcAdmissionControlActionResult 9.1.5003.9.10.3.1.1.24.25.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcAdmissionControlLimitType 9.1.5003.9.10.3.1.1.24.25.1.5
Access: Instant. AC INI-Param: SBCAdmissionControl_LimitType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ipGroup(0), sRD(1)  

sbcAdmissionControlIpGroupID 9.1.5003.9.10.3.1.1.24.25.1.6
Access: Instant. AC INI-Param: SBCAdmissionControl_IPGroupID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..9  

sbcAdmissionControlSrdID 9.1.5003.9.10.3.1.1.24.25.1.7
Access: Instant. AC INI-Param: SBCAdmissionControl_SRDID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..4  

sbcAdmissionControlRequestType 9.1.5003.9.10.3.1.1.24.25.1.8
Access: Instant. AC INI-Param: SBCAdmissionControl_RequestType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER all(0), invite(1), subscribe(2), other(3)  

sbcAdmissionControlRequestDirection 9.1.5003.9.10.3.1.1.24.25.1.9
Access: Instant. AC INI-Param: SBCAdmissionControl_RequestDirection
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER both(0), in(1), out(2)  

sbcAdmissionControlLimit 9.1.5003.9.10.3.1.1.24.25.1.10
Access: Instant. AC INI-Param: SBCAdmissionControl_Limit
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..2147483647  

sbcAdmissionControlLimitPerUser 9.1.5003.9.10.3.1.1.24.25.1.11
Access: Instant. AC INI-Param: SBCAdmissionControl_LimitPerUser
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..2147483647  

sbcMessageManipulationsTable 9.1.5003.9.10.3.1.1.24.26
SBC Message Manipulations Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SbcMessageManipulationsEntry

sbcMessageManipulationsEntry 9.1.5003.9.10.3.1.1.24.26.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SbcMessageManipulationsEntry  

sbcMessageManipulationsIndex 9.1.5003.9.10.3.1.1.24.26.1.1
. AC INI-Param: MessageManipulations_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..19  

sbcMessageManipulationsRowStatus 9.1.5003.9.10.3.1.1.24.26.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sbcMessageManipulationsAction 9.1.5003.9.10.3.1.1.24.26.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcMessageManipulationsActionResult 9.1.5003.9.10.3.1.1.24.26.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcMessageManipulationsManipulationSetID 9.1.5003.9.10.3.1.1.24.26.1.5
Manipulation Set ID. Access: Instant. AC INI-Param: MessageManipulations_ManSetID
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..20  

sbcMessageManipulationsMessageType 9.1.5003.9.10.3.1.1.24.26.1.6
Message type. Access: Instant. AC INI-Param: MessageManipulations_MessageType
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sbcMessageManipulationsCondition 9.1.5003.9.10.3.1.1.24.26.1.7
Message manipulation Condition. Access: Instant. AC INI-Param: MessageManipulations_Condition
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..199)  

sbcMessageManipulationsActionSubject 9.1.5003.9.10.3.1.1.24.26.1.8
Message manipulation Action Subject. Access: Instant. AC INI-Param: MessageManipulations_ActionSubject
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..99)  

sbcMessageManipulationsActionType 9.1.5003.9.10.3.1.1.24.26.1.9
Message manipulation Action type. Access: Instant. AC INI-Param: MessageManipulations_ActionType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER add(0), remove(1), modify(2), addPrefix(3), addSuffix(4), removeSuffix(5), removePrefix(6)  

sbcMessageManipulationsActionValue 9.1.5003.9.10.3.1.1.24.26.1.10
Message manipulation Action value. Access: Instant. AC INI-Param: MessageManipulations_ActionValue
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..199)  

sbcMessageManipulationsRowRole 9.1.5003.9.10.3.1.1.24.26.1.11
Message manipulation row rule. Access: Instant. AC INI-Param: MessageManipulations_RowRole
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER matchAndAction(0), actionOnly(1)  

sbcAlternativeRoutingReasonsTable 9.1.5003.9.10.3.1.1.24.27
GwApp Reasons For Alternative Routing For SBC Application(IP to IP) Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SbcAlternativeRoutingReasonsEntry

sbcAlternativeRoutingReasonsEntry 9.1.5003.9.10.3.1.1.24.27.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SbcAlternativeRoutingReasonsEntry  

sbcAlternativeRoutingReasonsIndex 9.1.5003.9.10.3.1.1.24.27.1.1
. AC INI-Param: SBCAlternativeRoutingReasons_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4  

sbcAlternativeRoutingReasonsRowStatus 9.1.5003.9.10.3.1.1.24.27.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sbcAlternativeRoutingReasonsAction 9.1.5003.9.10.3.1.1.24.27.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcAlternativeRoutingReasonsActionResult 9.1.5003.9.10.3.1.1.24.27.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sbcAlternativeRoutingReasonsReleaseCause 9.1.5003.9.10.3.1.1.24.27.1.5
Release Cause. Access: Instant. AC INI-Param: SBCAlternativeRoutingReasons_ReleaseCause
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..700  

gwIPv6 9.1.5003.9.10.3.1.1.25
OBJECT IDENTIFIER    

gwIPv6GwAppDualIPStackSDPMethod 9.1.5003.9.10.3.1.1.25.1
0. Always offer a single (preferrable) media IP address. 1. ANAT - Construct offer using ANAT semantics (RFC 4091 & RFC 4092) . Access: Instant. AC INI-Param: DUALIPSTACKSDPMETHOD
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nONE(0), aNAT(1)  

gwIPv6GwAppPrimaryMediaInterface 9.1.5003.9.10.3.1.1.25.2
Primary media interface to be used within SDP. Access: Instant. AC INI-Param: PRIMARYMEDIAINTERFACE
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..32  

gwIPv6GwAppSecondaryMediaInterface 9.1.5003.9.10.3.1.1.25.3
Secondary media interface to be used within SDP. Access: Instant. AC INI-Param: SECONDARYMEDIAINTERFACE
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..32  

gwIPv6MediaIPVersionPreference 9.1.5003.9.10.3.1.1.25.4
Select the preferred Media IP version. Access: Instant. AC INI-Param: MEDIAIPVERSIONPREFERENCE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER onlyIPv4(0), onlyIPv6(1), preferIPv4(2), preferIPv6(3)  

srdSettings 9.1.5003.9.10.3.1.1.26
OBJECT IDENTIFIER    

srdTable 9.1.5003.9.10.3.1.1.26.21
GwApp Signaling Routing Domain (SRD) Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SrdEntry

srdEntry 9.1.5003.9.10.3.1.1.26.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SrdEntry  

srdIndex 9.1.5003.9.10.3.1.1.26.21.1.1
. AC INI-Param: SRD_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4  

srdRowStatus 9.1.5003.9.10.3.1.1.26.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

srdAction 9.1.5003.9.10.3.1.1.26.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

srdActionResult 9.1.5003.9.10.3.1.1.26.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

srdName 9.1.5003.9.10.3.1.1.26.21.1.5
GwApp Signaling Routing Domain name. Access: Instant. AC INI-Param: SRD_Name
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

srdMediaRealm 9.1.5003.9.10.3.1.1.26.21.1.6
GwApp Signaling Routing Domain media realm. Access: Instant. AC INI-Param: SRD_MediaRealm
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..39)  

srdIntraSRDMediaAnchoring 9.1.5003.9.10.3.1.1.26.21.1.7
Internal SRD Media Anchoring. Access: Offline. AC INI-Param: SRD_IntraSRDMediaAnchoring
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER anchorMedia(0), dontAnchorMedia(1)  

srdBlockUnRegUsers 9.1.5003.9.10.3.1.1.26.21.1.8
Block Calls From Unregistered User. Access: Offline. AC INI-Param: SRD_BlockUnRegUsers
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

srdMaxNumOfRegUsers 9.1.5003.9.10.3.1.1.26.21.1.9
Max Number Of Registered Users. MP1xx - 25 M1K - 200 M2K- 250 M3K - 3000. Access: Offline. AC INI-Param: SRD_MaxNumOfRegUsers
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..3000  

sipInterfaceSettings 9.1.5003.9.10.3.1.1.27
OBJECT IDENTIFIER    

sipInterfaceTable 9.1.5003.9.10.3.1.1.27.21
GwApp SIP Interface Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SipInterfaceEntry

sipInterfaceEntry 9.1.5003.9.10.3.1.1.27.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SipInterfaceEntry  

sipInterfaceIndex 9.1.5003.9.10.3.1.1.27.21.1.1
. AC INI-Param: SIPInterface_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..5  

sipInterfaceRowStatus 9.1.5003.9.10.3.1.1.27.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sipInterfaceAction 9.1.5003.9.10.3.1.1.27.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sipInterfaceActionResult 9.1.5003.9.10.3.1.1.27.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sipInterfaceNetworkInterface 9.1.5003.9.10.3.1.1.27.21.1.5
Network Interface. Access: Instant. AC INI-Param: SIPInterface_NetworkInterface
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

sipInterfaceApplicationType 9.1.5003.9.10.3.1.1.27.21.1.6
Application Type. Access: Instant. AC INI-Param: SIPInterface_ApplicationType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER gwIP2IP(0), sas(1), sbc(2)  

sipInterfaceUDPPort 9.1.5003.9.10.3.1.1.27.21.1.7
UDP Port number. Access: Instant. AC INI-Param: SIPInterface_UDPPort
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..65534  

sipInterfaceTCPPort 9.1.5003.9.10.3.1.1.27.21.1.8
TCP Port number. Access: Instant. AC INI-Param: SIPInterface_TCPPort
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..65534  

sipInterfaceTLSPort 9.1.5003.9.10.3.1.1.27.21.1.9
TLS Port number. Access: Instant. AC INI-Param: SIPInterface_TLSPort
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..65534  

sipInterfaceSRD 9.1.5003.9.10.3.1.1.27.21.1.10
Access: Instant. AC INI-Param: SIPInterface_SRD
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4  

sip 9.1.5003.9.10.3.1.2
OBJECT IDENTIFIER    

sipProxy 9.1.5003.9.10.3.1.2.1
OBJECT IDENTIFIER    

sipProxyUsed 9.1.5003.9.10.3.1.2.1.1
Is SIP Proxy used. Access: Instant. AC INI-Param: ISPROXYUSED
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipProxyEnableKeepAlive 9.1.5003.9.10.3.1.2.1.2
Enable Proxy Keep-Alive over OPTIONS method or REGISTER method. Access: Instant. AC INI-Param: ENABLEPROXYKEEPALIVE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), usingOptions(1), usingRegister(2)  

sipProxyName 9.1.5003.9.10.3.1.2.1.3
SIP Proxy name. Access: Instant. AC INI-Param: PROXYNAME
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sipProxyIsHotSwap 9.1.5003.9.10.3.1.2.1.4
Enable Proxy Hot-Swap mode. Access: Instant. AC INI-Param: ISPROXYHOTSWAP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipProxyHotSwapRtx 9.1.5003.9.10.3.1.2.1.5
Number of Rtx before Hotswap is performed. Access: Instant. AC INI-Param: PROXYHOTSWAPRTX
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..30  

sipProxyRedundancyMode 9.1.5003.9.10.3.1.2.1.6
Redundancy Mode - Parking on active proxy or switching to main Proxy whenever online. Access: Instant. AC INI-Param: PROXYREDUNDANCYMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER parking(0), homing(1)  

sipProxyAlwaysUseRouteTable 9.1.5003.9.10.3.1.2.1.7
Always use routing table even though proxy is available. Access: Instant. AC INI-Param: ALWAYSUSEROUTETABLE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipProxyAlwaysSendToProxy 9.1.5003.9.10.3.1.2.1.8
Send all messages to Proxy server. Access: Instant. AC INI-Param: ALWAYSSENDTOPROXY
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipProxyKeepAliveTime 9.1.5003.9.10.3.1.2.1.9
Time interval between Proxy Keep-Alive messages (seconds). Access: Instant. AC INI-Param: ProxyKeepAliveTime
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..2000000  

sipProxyIsFallbackUsed 9.1.5003.9.10.3.1.2.1.10
Allow fallback to internal Tel to IP routing table if Proxy is not responding. Access: Instant. AC INI-Param: IsFallbackUsed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipProxySendInviteToProxy 9.1.5003.9.10.3.1.2.1.11
Always send INVITE messages to Proxy server. Access: Instant. AC INI-Param: SENDINVITETOPROXY
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipProxyIsTrustedProxy 9.1.5003.9.10.3.1.2.1.12
Determine whether the proxy is a trusted node. Access: Instant. AC INI-Param: ISTRUSTEDPROXY
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipProxyUseGatewayNameForOptions 9.1.5003.9.10.3.1.2.1.13
Use Gateway name (instead of IP address) in Keep-Alive OPTIONS messages. Access: Instant. AC INI-Param: USEGATEWAYNAMEFOROPTIONS
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipProxyEnableSRVQuery 9.1.5003.9.10.3.1.2.1.14
Enable DNS SRV queries for Proxy domain name. Access: Instant. AC INI-Param: ENABLEPROXYSRVQUERY
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipProxyDNSQueryType 9.1.5003.9.10.3.1.2.1.15
DNS Query Type: 0-ARecord, 1-SRV, 2-NAPTR . Has effect on every DNS query in the system. Access: Instant. AC INI-Param: DNSQUERYTYPE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER aRecord(0), sRV(1), nAPTR(2)  

sipProxyLoadBalancingMethod 9.1.5003.9.10.3.1.2.1.16
Method of the proxies load balancing: 0 - Disabled (default) 1 - RoundRobin 2 - Random SRV Weights. Access: Instant. AC INI-Param: PROXYLOADBALANCINGMETHOD
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), roundRobin(1), randomWeights(2)  

sipProxyIPListRefreshTime 9.1.5003.9.10.3.1.2.1.17
Time interval between refresh of proxies list (seconds). For example SRV query will be done every ProxyIPListRefreshTime seconds. Access: Instant. AC INI-Param: PROXYIPLISTREFRESHTIME
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..2000000  

proxyIPTable 9.1.5003.9.10.3.1.2.1.21
The table defines phone numbers for gateway endpoints. The endpoints that aren't defined will be disabled.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ProxyIPEntry

proxyIPEntry 9.1.5003.9.10.3.1.2.1.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ProxyIPEntry  

proxyIPIndex 9.1.5003.9.10.3.1.2.1.21.1.1
Entry number, starting at 0. AC INI-Param: ProxyIp_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4  

proxyIPRowStatus 9.1.5003.9.10.3.1.2.1.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

proxyIPAction 9.1.5003.9.10.3.1.2.1.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

proxyIPActionResult 9.1.5003.9.10.3.1.2.1.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

proxyIPProxyIP 9.1.5003.9.10.3.1.2.1.21.1.5
Access: Instant. AC INI-Param: ProxyIp_IpAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sipProxySetTable 9.1.5003.9.10.3.1.2.1.22
GwApp Proxy Set Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SipProxySetEntry

sipProxySetEntry 9.1.5003.9.10.3.1.2.1.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SipProxySetEntry  

sipProxySetIndex 9.1.5003.9.10.3.1.2.1.22.1.1
AC INI-Param: ProxySet_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..10  

sipProxySetRowStatus 9.1.5003.9.10.3.1.2.1.22.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sipProxySetAction 9.1.5003.9.10.3.1.2.1.22.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sipProxySetActionResult 9.1.5003.9.10.3.1.2.1.22.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sipProxySetEnableProxyKeepAlive 9.1.5003.9.10.3.1.2.1.22.1.5
GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_EnableProxyKeepAlive
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), usingOptions(1), usingRegister(2)  

sipProxySetProxyKeepAliveTime 9.1.5003.9.10.3.1.2.1.22.1.6
GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_ProxyKeepAliveTime
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 5..2000000  

sipProxySetProxyLoadBalancingMethod 9.1.5003.9.10.3.1.2.1.22.1.7
GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_ProxyLoadBalancingMethod
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), roundRobin(1), randomWeights(2)  

sipProxySetIsProxyHotSwap 9.1.5003.9.10.3.1.2.1.22.1.8
GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_IsProxyHotSwap
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipDTMF 9.1.5003.9.10.3.1.2.2
OBJECT IDENTIFIER    

sipDTMFIsHookFlashUsed 9.1.5003.9.10.3.1.2.2.1
Detect and send Hook-Flash as Out-of-Band message. Access: Instant. AC INI-Param: ISHOOKFLASHUSED
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipDTMFIsDTMFUsed 9.1.5003.9.10.3.1.2.2.2
Send DTMFs on the Signaling path (not on the Media path). Access: Instant. AC INI-Param: ISDTMFUSED
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipDTMFOutOfBandDtmfFormat 9.1.5003.9.10.3.1.2.2.3
DTMF Out-of-Band transport method. Access: Instant. AC INI-Param: OUTOFBANDDTMFFORMAT
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER info-Nortel(1), info-Cisco(2), notify(3)  

sipDTMFDisableAutoMute 9.1.5003.9.10.3.1.2.2.4
Disables inband auto mute of DTMFs when signalling is used for sending DTMFs. Access: Instant. AC INI-Param: DISABLEAUTODTMFMUTE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipDTMFRxDTMFOption 9.1.5003.9.10.3.1.2.2.5
Declare support for RFC 2833 in SDP. Access: Instant. AC INI-Param: RXDTMFOPTION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noSupportRFC2833inSDP(0), supportRFC2833inSDP(3)  

sipDTMFHookFlashOption 9.1.5003.9.10.3.1.2.2.6
Detect and send Hook-Flash using the selected method. Access: Instant. AC INI-Param: HOOKFLASHOPTION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notSupported(0), iNFO(1), rFC2833(4), infoLucent(5)  

sipDTMFUseDigitForSpecialDTMF 9.1.5003.9.10.3.1.2.2.7
Indicates whether a special DTMF, sent with INFO(Cisco), is sent using its digit representation or not. Access: Instant. AC INI-Param: USEDIGITFORSPECIALDTMF
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER special(0), numeric(1)  

sipDTMFMinRoutingOverlapDigits 9.1.5003.9.10.3.1.2.2.8
Minimum number of overlap digits before routing. Access: Instant. AC INI-Param: MINOVERLAPDIGITSFORROUTING
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..49  

sipDTMFISDNOverlapIPtoTelDialing 9.1.5003.9.10.3.1.2.2.9
Enable ISDN Overlap IP to Tel Dialing. Access: Instant. AC INI-Param: ISDNTXOVERLAP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipTxDTMFOptionTable 9.1.5003.9.10.3.1.2.2.21
The names of the five possible coders.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SipTxDTMFOptionEntry

sipTxDTMFOptionEntry 9.1.5003.9.10.3.1.2.2.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SipTxDTMFOptionEntry  

sipTxDTMFOptionIndex 9.1.5003.9.10.3.1.2.2.21.1.1
Entry number, starting at 0. AC INI-Param: TxDtmfOption_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4  

sipTxDTMFOptionRowStatus 9.1.5003.9.10.3.1.2.2.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sipTxDTMFOptionAction 9.1.5003.9.10.3.1.2.2.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sipTxDTMFOptionActionResult 9.1.5003.9.10.3.1.2.2.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sipTxDTMFOptionValue 9.1.5003.9.10.3.1.2.2.21.1.5
Transmit DTMF option. Access: Instant. AC INI-Param: TxDtmfOption_Type
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notSupported(0), nortelINFO(1), nOTIFY(2), ciscoINFO(3), rFC2833(4), koreaTelecomINFO(5)  

sipPorts 9.1.5003.9.10.3.1.2.3
OBJECT IDENTIFIER    

sipPortsDestinationPort 9.1.5003.9.10.3.1.2.3.1
Default SIP destination port (usually 5060). Access: Instant. AC INI-Param: SIPDESTINATIONPORT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65534  

sipPortsLocalSipPort 9.1.5003.9.10.3.1.2.3.2
Local SIP port used for signaling. Access: Instant. AC INI-Param: LOCALSIPPORT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65534  

sipPortsTCPLocalSipPort 9.1.5003.9.10.3.1.2.3.3
Local SIP port used for signaling. Access: Instant. AC INI-Param: TCPLOCALSIPPORT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

sipPortsTLSLocalSipPort 9.1.5003.9.10.3.1.2.3.4
Local TLS SIP port used for signaling. Access: Instant. AC INI-Param: TLSLOCALSIPPORT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

sipAuth 9.1.5003.9.10.3.1.2.4
OBJECT IDENTIFIER    

sipAuthMode 9.1.5003.9.10.3.1.2.4.1
Authentication mode. Access: Instant. AC INI-Param: AUTHENTICATIONMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER perEP(0), perGW(1), perFXSOnly(3)  

sipAuthUserName 9.1.5003.9.10.3.1.2.4.2
User Name used for authentication. Access: Instant. AC INI-Param: USERNAME
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

sipAuthPassword 9.1.5003.9.10.3.1.2.4.3
Password used for authentication. Access: Instant. AC INI-Param: PASSWORD
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

sipAuthCnonce 9.1.5003.9.10.3.1.2.4.4
Cnonce parameter used for authentication. Access: Instant. AC INI-Param: CNONCE
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

sipAuthMutualAuthenticationMode 9.1.5003.9.10.3.1.2.4.5
Mutual Authentication Mode: 0 - Optional, 1 - Mandatory. Access: Instant. AC INI-Param: MUTUALAUTHENTICATIONMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER optional(0), mandatory(1)  

sipAuthChallengeCachingMode 9.1.5003.9.10.3.1.2.4.6
0. No caching mode - don't cache any challenges. Every new request will be sent without preliminary authorization. If the request is challenged - new request with authorization data will be sent. 1. Cache for INVITE mode - challenges issued for INVITE request and within the session will be cached. This will prevent the mixture of REGISTER and INVITE authorizations. 2. Full cache mode - cache any challenges from the proxies. . Access: Instant. AC INI-Param: SIPCHALLENGECACHINGMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noCaching(0), inviteOnly(1), fullCaching(2)  

authTable 9.1.5003.9.10.3.1.2.4.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AuthEntry

authEntry 9.1.5003.9.10.3.1.2.4.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AuthEntry  

authIndex 9.1.5003.9.10.3.1.2.4.21.1.1
Entry number, starting at 0. AC INI-Param: Authentication_Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..23  

authIsUsed 9.1.5003.9.10.3.1.2.4.21.1.2
Is this index used. Access: Offline. AC INI-Param: Authentication_IsUsed
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

authAction 9.1.5003.9.10.3.1.2.4.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

authActionResult 9.1.5003.9.10.3.1.2.4.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

authUserID 9.1.5003.9.10.3.1.2.4.21.1.5
Access: Instant. AC INI-Param: Authentication_UserId
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

authUserPassword 9.1.5003.9.10.3.1.2.4.21.1.6
Access: Instant. AC INI-Param: Authentication_UserPassword
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

authModule 9.1.5003.9.10.3.1.2.4.21.1.7
Module. AC INI-Param: Authentication_Module
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

authPort 9.1.5003.9.10.3.1.2.4.21.1.8
Port. AC INI-Param: Authentication_Port
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

sipRetransmission 9.1.5003.9.10.3.1.2.5
OBJECT IDENTIFIER    

sipRetransmissionT1Rtx 9.1.5003.9.10.3.1.2.5.1
SIP T1 timeout for retransmission. Access: Instant. AC INI-Param: SIPT1RTX
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 100..4000  

sipRetransmissionT2Rtx 9.1.5003.9.10.3.1.2.5.2
SIP T2 timeout for retransmission. Access: Instant. AC INI-Param: SIPT2RTX
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 100..10000  

sipRetransmissionSipMaxRtx 9.1.5003.9.10.3.1.2.5.3
Maximum number of retransmissions. Access: Instant. AC INI-Param: SipMaxRtx
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..30  

sipRetransmissionIsRtxEnable 9.1.5003.9.10.3.1.2.5.4
is Rtx timer enabled. Access: Instant. AC INI-Param: ISRTXENABLE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipRetransmissionEnablePTime 9.1.5003.9.10.3.1.2.5.5
is ptime parameter needed in sdp. Access: Instant. AC INI-Param: ENABLEPTIME
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipRetransmissionTCPTimeout 9.1.5003.9.10.3.1.2.5.6
SIP TCP time out (influence timerB and Timer F). Access: Instant. AC INI-Param: SIPTCPTIMEOUT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..60  

sipRetransmissionRetryAfterTime 9.1.5003.9.10.3.1.2.5.7
Retry After time for the proxy to be in state Unavailable. Access: Instant. AC INI-Param: RETRYAFTERTIME
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3600  

sipRegistration 9.1.5003.9.10.3.1.2.6
OBJECT IDENTIFIER    

sipRegistrationIsNeeded 9.1.5003.9.10.3.1.2.6.1
Is Proxy registration necessary. Access: Instant. AC INI-Param: ISREGISTERNEEDED
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipRegistrationIP 9.1.5003.9.10.3.1.2.6.2
SIP Registrar IP address. Access: Instant. AC INI-Param: REGISTRARIP
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sipRegistrationTime 9.1.5003.9.10.3.1.2.6.3
Time for which registration to Gatekeeper/Proxy is valid. Causes periodic registration (seconds). Access: Instant. AC INI-Param: RegistrationTime
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..2000000  

sipRegistrationRegistrationRetryTime 9.1.5003.9.10.3.1.2.6.4
Time in which the gateway will try to register after last registration failure (seconds). Access: Instant. AC INI-Param: REGISTRATIONRETRYTIME
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..2000000  

sipRegistrationRegistrarName 9.1.5003.9.10.3.1.2.6.5
SIP Registrar name. Access: Instant. AC INI-Param: REGISTRARNAME
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sipRegistrationTimeDivider 9.1.5003.9.10.3.1.2.6.6
Percentage of RegistrationTime when the actual new REGISTER request will be sent out. Access: Instant. AC INI-Param: REGISTRATIONTIMEDIVIDER
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 30..100  

sipRegistrationName 9.1.5003.9.10.3.1.2.6.7
Gateway registration name. Access: Instant. AC INI-Param: GWREGISTRATIONNAME
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

sipRegistrationRegisterOnInviteFailure 9.1.5003.9.10.3.1.2.6.8
Enable ReRegister upon INVITE transaction failure. Access: Instant. AC INI-Param: REGISTERONINVITEFAILURE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipRegistrationTimeThreshold 9.1.5003.9.10.3.1.2.6.9
If (REGISTRATIONTIMETHRESHOLD > 0) and (REGISTRATIONTIMETHRESHOLD < computed registration time using existing logic) then new registration time will be (Registration time from expires header - REGISTRATIONTIMETHRESHOLD). Access: Instant. AC INI-Param: REGISTRATIONTIMETHRESHOLD
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2000000  

sipRegistrationRegistrarTransportType 9.1.5003.9.10.3.1.2.6.10
Registrar transport type. Access: Instant. AC INI-Param: REGISTRARTRANSPORTTYPE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notConfigured(-1), uDP(0), tCP(1), tLS(2)  

sipRegistrationReRegisterOnConnectionFailure 9.1.5003.9.10.3.1.2.6.11
Enables GW to perform Re-Registeration on TCP/TLS connection failure. Access: Instant. AC INI-Param: REREGISTERONCONNECTIONFAILURE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMisc 9.1.5003.9.10.3.1.2.7
OBJECT IDENTIFIER    

sipMiscEnableEarlyMedia 9.1.5003.9.10.3.1.2.7.1
Enable Early Media. Access: Instant. AC INI-Param: ENABLEEARLYMEDIA
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipMiscSipSessionExpires 9.1.5003.9.10.3.1.2.7.2
The SIP session will be refreshed (using INVITE) each time this timer expires (seconds). Access: Instant. AC INI-Param: SIPSESSIONEXPIRES
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1999999  

sipMiscIsUserPhone 9.1.5003.9.10.3.1.2.7.3
Add User=Phone parameter to SIP URL. Access: Instant. AC INI-Param: ISUSERPHONE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipMiscGatewayName 9.1.5003.9.10.3.1.2.7.4
Gateway name. Access: Instant. AC INI-Param: SIPGATEWAYNAME
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sipMiscPrackMode 9.1.5003.9.10.3.1.2.7.5
PRACK mechanism mode for 1XX reliable responses: 0- Disabled , 1- Supported , 2- Required. Access: Instant. AC INI-Param: PrackMode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), supported(1), required(2)  

sipMiscEnableRpiHeader 9.1.5003.9.10.3.1.2.7.6
Enable Remote-Party-ID header. Access: Instant. AC INI-Param: ENABLERPIHEADER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipMiscXChannelHeader 9.1.5003.9.10.3.1.2.7.7
0 (default): No special header 1:Add special header for trunk and B-Channel. Access: Instant. AC INI-Param: XCHANNELHEADER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscAssertedIDMode 9.1.5003.9.10.3.1.2.7.8
Select Asserted Identity header method. Access: Instant. AC INI-Param: ASSERTEDIDMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noHeaderAdded(0), pAssertedIdRFC3325(1), pPreferreddIdRFC3325(2)  

sipMiscIsUserPhoneInFrom 9.1.5003.9.10.3.1.2.7.9
Add 'User=Phone' to From header. Access: Instant. AC INI-Param: ISUSERPHONEINFROM
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscAddTon2Rpi 9.1.5003.9.10.3.1.2.7.10
Add Number Type and Plan to Remote-Party-ID header. Access: Instant. AC INI-Param: ADDTON2RPI
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscEnableCIC 9.1.5003.9.10.3.1.2.7.11
Enables CIC -> ISDN TNS IE interworking. Access: Instant. AC INI-Param: ENABLECIC
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sipMiscTransportType 9.1.5003.9.10.3.1.2.7.12
SIP transport type. Access: Instant. AC INI-Param: SIPTRANSPORTTYPE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER udp(0), tcp(1), tls(2)  

sipMiscISubNumberOfDigits 9.1.5003.9.10.3.1.2.7.13
Number of digits that will be taken from end of phone number as Subaddress. Access: Instant. AC INI-Param: ISUBNUMBEROFDIGITS
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..36  

sipMiscSIP183Behaviour 9.1.5003.9.10.3.1.2.7.14
If this parameter set to 1, ALERT to ISDN will be sent upon 183 receive. Access: Instant. AC INI-Param: SIP183BEHAVIOUR
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscUseToHeaderAsCalledNum 9.1.5003.9.10.3.1.2.7.15
Use the user part of To header URL as called number (IP->TEL). Access: Instant. AC INI-Param: ISUSETOHEADERASCALLEDNUMBER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscEnableSIPS 9.1.5003.9.10.3.1.2.7.16
Enable SIP secured URI usage. Access: Instant. AC INI-Param: ENABLESIPS
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscEnableSRVQuery 9.1.5003.9.10.3.1.2.7.17
Enable DNS SRV queries. Access: Instant. AC INI-Param: ENABLESRVQUERY
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscSubject 9.1.5003.9.10.3.1.2.7.18
User-defined sip subject. Access: Instant. AC INI-Param: SIPSUBJECT
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sipMiscUseSIPTgrp 9.1.5003.9.10.3.1.2.7.19
Use TGRP parameter 0 - disable [Default] , 1 - send only , 2 - send and use if in the RequestURI when receiving INVITE, 3 - Nortel Hotline. Access: Instant. AC INI-Param: USESIPTGRP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), sendOnly(1), sendAndReceive(2), nortelHotline(3)  

sipMiscSend180ForCallWaiting 9.1.5003.9.10.3.1.2.7.20
Send 180 for call waiting. Used for parties that do not support 182. Access: Instant. AC INI-Param: SEND180FORCALLWAITING
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscUserAgentDisplayInfo 9.1.5003.9.10.3.1.2.7.21
String that will be displayed in the SIP Header 'User-Agent' or 'Server'. Access: Instant. AC INI-Param: USERAGENTDISPLAYINFO
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

sipMiscSessionExpiresMethod 9.1.5003.9.10.3.1.2.7.22
Determines the Method which the SIP session will be using to referesh the session. Access: Instant. AC INI-Param: SESSIONEXPIRESMETHOD
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER invite(0), update(1)  

sipMiscEnableGRUU 9.1.5003.9.10.3.1.2.7.23
Obtain and use GRUU (Global Routable UserAgentURIs). Access: Instant. AC INI-Param: ENABLEGRUU
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscDNSQueryType 9.1.5003.9.10.3.1.2.7.24
DNS Query Type: 0-ARecord, 1-SRV, 2-NAPTR . Has effect on every DNS query in the system. Access: Instant. AC INI-Param: DNSQUERYTYPE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER aRecord(0), sRV(1), nAPTR(2)  

sipMiscEnableHistoryInfo 9.1.5003.9.10.3.1.2.7.25
Enable History-Info header support. Access: Instant. AC INI-Param: ENABLEHISTORYINFO
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscEnableTCPConnectionReuse 9.1.5003.9.10.3.1.2.7.26
Enable reuse of TCP connection. Access: Instant. AC INI-Param: ENABLETCPCONNECTIONREUSE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscComfortNoiseNegotiation 9.1.5003.9.10.3.1.2.7.27
is CN payload type is used and being negotiate. Access: Instant. AC INI-Param: COMFORTNOISENEGOTIATION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscMultiPtimeFormat 9.1.5003.9.10.3.1.2.7.28
Format of multiple ptime (ptime per coder) in outgoing SDP. Access: Instant. AC INI-Param: MULTIPTIMEFORMAT
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), packetCable(1)  

sipMiscRTPOnlyMode 9.1.5003.9.10.3.1.2.7.29
On RTP only mode their is no signalling protocol (for media parameters negotiation with the remote side). The channel is open immediately. The IP for the media is taken from the routing table. The RTP ports are corresponding to the local side ports. RTP-Only mode Values: 0 - regular call establishment 1 - No Signalling. The RTP channel open for Rx & Tx 2- No Signalling. The RTP channel open only for Tx 3 - No Signalling. The RTP channel open only for Rx. Access: Instant. AC INI-Param: RTPONLYMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), transmitNReceive(1), transmitOnly(2), receiveOnly(3)  

sipMiscEnableReasonHeader 9.1.5003.9.10.3.1.2.7.30
Enable Reason header in the outgoing messages. Access: Instant. AC INI-Param: ENABLEREASONHEADER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMisc3xxBehavior 9.1.5003.9.10.3.1.2.7.31
3xx response behavior: Forwarding behavior - use different call identifiers Redirect behavior - use the same call identifiers: From, To & CallID. Access: Instant. AC INI-Param: 3XXBEHAVIOR
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forward(0), redirect(1)  

sipMiscEnableSemiAttendedTransfer 9.1.5003.9.10.3.1.2.7.32
Semi-Attended Transfer when the session to the Target is not established. false - Use REFER with Replaces. true - Use CANCEL and REFER without Replaces if session is not established. Access: Instant. AC INI-Param: ENABLESEMIATTENDEDTRANSFER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscUseSIPURIForDiversionHeader 9.1.5003.9.10.3.1.2.7.33
Use Tel uri or Sip uri for Diversion header. Access: Instant. AC INI-Param: UseSIPURIForDiversionHeader
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tel(0), sip(1)  

sipMiscEnableVMURI 9.1.5003.9.10.3.1.2.7.34
Enable History-Info header support. Access: Instant. AC INI-Param: ENABLEVMURI
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscEnablePChargingVector 9.1.5003.9.10.3.1.2.7.35
Generate P-Charging-Vector header [0] - disabled [1] - enabled. Access: Instant. AC INI-Param: ENABLEPCHARGINGVECTOR
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscPAssertedUserName 9.1.5003.9.10.3.1.2.7.36
Digit pattern used to indicate Call Forward on Do Not Disturb (PBX to VoiceMail). Access: Instant. AC INI-Param: PASSERTEDUSERNAME
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

sipMiscSDPSessionOwner 9.1.5003.9.10.3.1.2.7.37
The SDP owner string. Access: Instant. AC INI-Param: SIPSDPSESSIONOWNER
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..39)  

sipMiscResetOnINIFileDownload 9.1.5003.9.10.3.1.2.7.38
Determine if Reset after INI File Download is execute. Access: Instant. AC INI-Param: ResetOnINIFileDownload
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscSetDefaultOnIniFileProcess 9.1.5003.9.10.3.1.2.7.39
Determine if all parameters are set to their defaults before processing updated INI File. Access: Instant. AC INI-Param: SetDefaultOnIniFileProcess
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1  

sipMiscEnableContactRestriction 9.1.5003.9.10.3.1.2.7.40
Hides the user part of the URI in the Contact Header 0 - Disable 1 - Enable. Access: Instant. AC INI-Param: ENABLECONTACTRESTRICTION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscEnablePAssociatedURIHeader 9.1.5003.9.10.3.1.2.7.41
Handles the P-Associated-URI header in a 200OK response for a REGISTER request. Access: Instant. AC INI-Param: ENABLEPASSOCIATEDURIHEADER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscMinSE 9.1.5003.9.10.3.1.2.7.42
Minimal value for session refresh. Access: Instant. AC INI-Param: MINSE
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..100000  

sipMiscApplicationProfile 9.1.5003.9.10.3.1.2.7.43
ApplicationProfile, read it later for validating that the board is theirs. Access: Offline. AC INI-Param: APPLICATIONPROFILE
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2000000  

sipMiscOPTIONSUserPart 9.1.5003.9.10.3.1.2.7.44
Allow to configure the OPTIONS userpart string for all gateways. The default value should be empty string which means that we don't use this parameter. Another special value is 'empty' which means that the we don't populate the user part of the OPTIONS request URI. Any other value will be taken as is and used as the user part of the OPTIONS request URI. Access: Instant. AC INI-Param: OPTIONSUSERPART
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..30)  

sipMiscUseAORInReferToHeader 9.1.5003.9.10.3.1.2.7.45
If enabled, we will use URI from To/From headers in Refer-To header. If disabled, we will take the URI from Contact. Access: Instant. AC INI-Param: USEAORINREFERTOHEADER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscForkingHandlingMode 9.1.5003.9.10.3.1.2.7.46
Decides the handling method to 18X response to forking 0 - Parallel handling - only the first 18X response is handled 1 - Sequential handling - all the 18X responses are handled. Access: Instant. AC INI-Param: FORKINGHANDLINGMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sequential(0), parallel(1)  

sipMiscOfferUnencryptedSRTCP 9.1.5003.9.10.3.1.2.7.47
If set to 1, the 'crypto' attribute includes the UNENCRYPTED_SRTCP parameter. If set to 1, the UNENCRYPTED_SRTCP parameter is not included. Access: Instant. AC INI-Param: OFFERUNENCRYPTEDSRTCP
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipMiscSourceNumberPreference 9.1.5003.9.10.3.1.2.7.48
Determines from where the source number shall be taken from (in an incoming INVITE request). Parameter values: - NULL: no changes in current logic - FROM: source number is taken from 'FROM' field. Access: Instant. AC INI-Param: SOURCENUMBERPREFERENCE
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..10)  

sipSubscribe 9.1.5003.9.10.3.1.2.8
OBJECT IDENTIFIER    

sipSubscribeEnable 9.1.5003.9.10.3.1.2.8.1
This parameter related to Subscribe/UnSubscribe buttons. Access: Instant. AC INI-Param: SHOULDSUBSCRIBE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipSubscribeRetryTime 9.1.5003.9.10.3.1.2.8.2
MWI service subscription retry time after last subscription failure (seconds). Access: Instant. AC INI-Param: SUBSCRIBERETRYTIME
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..2000000  

sipSubscribeEnableMWISubscription 9.1.5003.9.10.3.1.2.8.3
Enable subscription for Message Waiting Indicator service. Access: Instant. AC INI-Param: ENABLEMWISUBSCRIPTION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipSubscribeSubscriptionMode 9.1.5003.9.10.3.1.2.8.4
Subscription Mode: 0 - Per Endpoint, 1 - Per Gateway. Access: Instant. AC INI-Param: SUBSCRIPTIONMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER perEndpoint(0), perGateway(1)  

sipDigitalGW 9.1.5003.9.10.3.1.2.9
OBJECT IDENTIFIER    

causeMapSIP2ISDNTable 9.1.5003.9.10.3.1.2.9.21
Cause Map SIP to ISDN Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CauseMapSIP2ISDNEntry

causeMapSIP2ISDNEntry 9.1.5003.9.10.3.1.2.9.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  CauseMapSIP2ISDNEntry  

causeMapSIP2ISDNIndex 9.1.5003.9.10.3.1.2.9.21.1.1
AC INI-Param: CauseMapSip2Isdn_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..12  

causeMapSIP2ISDNRowStatus 9.1.5003.9.10.3.1.2.9.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

causeMapSIP2ISDNAction 9.1.5003.9.10.3.1.2.9.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

causeMapSIP2ISDNActionResult 9.1.5003.9.10.3.1.2.9.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

causeMapSIP2ISDNSIPResponse 9.1.5003.9.10.3.1.2.9.21.1.5
Access: Instant. AC INI-Param: CauseMapSip2Isdn_SipResponse
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..700  

causeMapSIP2ISDNQ850Cause 9.1.5003.9.10.3.1.2.9.21.1.6
Access: Instant. AC INI-Param: CauseMapSip2Isdn_IsdnReleaseCause
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..127  

causeMapISDN2SIPTable 9.1.5003.9.10.3.1.2.9.22
Cause Map SIP to ISDN Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CauseMapISDN2SIPEntry

causeMapISDN2SIPEntry 9.1.5003.9.10.3.1.2.9.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  CauseMapISDN2SIPEntry  

causeMapISDN2SIPIndex 9.1.5003.9.10.3.1.2.9.22.1.1
AC INI-Param: CauseMapIsdn2Sip_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..12  

causeMapISDN2SIPRowStatus 9.1.5003.9.10.3.1.2.9.22.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

causeMapISDN2SIPAction 9.1.5003.9.10.3.1.2.9.22.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

causeMapISDN2SIPActionResult 9.1.5003.9.10.3.1.2.9.22.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

causeMapISDN2SIPQ850Cause 9.1.5003.9.10.3.1.2.9.22.1.5
Access: Instant. AC INI-Param: CauseMapIsdn2Sip_IsdnReleaseCause
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..127  

causeMapISDN2SIPSIPResponse 9.1.5003.9.10.3.1.2.9.22.1.6
Access: Instant. AC INI-Param: CauseMapIsdn2Sip_SipResponse
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..700  

sipSAS 9.1.5003.9.10.3.1.2.10
OBJECT IDENTIFIER    

sipSASEnable 9.1.5003.9.10.3.1.2.10.1
Enables SAS functionality. Access: Offline. AC INI-Param: ENABLESAS
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipSASLocalSIPUdpPort 9.1.5003.9.10.3.1.2.10.2
Local SAS SIP port used for signaling over UDP. Access: Instant. AC INI-Param: SASLOCALSIPUDPPORT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65534  

sipSASDefaultGatewayIP 9.1.5003.9.10.3.1.2.10.3
SIP SAS default IP address for incoming requests in emergency mode. Access: Instant. AC INI-Param: SASDEFAULTGATEWAYIP
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..49)  

sipSASLocalSIPTlsPort 9.1.5003.9.10.3.1.2.10.4
Local SAS SIP port used for signaling over TLS. Access: Instant. AC INI-Param: SASLOCALSIPTLSPORT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65534  

sipSASRegistrationTime 9.1.5003.9.10.3.1.2.10.5
SAS will send this value in expires header while working in emergency mode. Access: Instant. AC INI-Param: SASREGISTRATIONTIME
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2000000  

sipSASShortNumberLength 9.1.5003.9.10.3.1.2.10.6
Upon incoming request the user info in the request is compared to the registered one. SAS performs comparison of the arrived user info with the suffix of the registered one. The length of the suffix is determined by this parameter. Access: Instant. AC INI-Param: SASSHORTNUMBERLENGTH
Status: deprecated Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

sipSASLocalSIPTcpPort 9.1.5003.9.10.3.1.2.10.7
Local SAS SIP port used for signaling over TCP. Access: Instant. AC INI-Param: SASLOCALSIPTCPPORT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65534  

sipSASProxySet 9.1.5003.9.10.3.1.2.10.8
Proxy Set Id for SAS. Access: Instant. AC INI-Param: SASPROXYSET
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..5  

sipSASRedundantProxySet 9.1.5003.9.10.3.1.2.10.9
Proxy Set Id for Redundant SAS. Access: Instant. AC INI-Param: REDUNDANTSASPROXYSET
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..5  

sipSASBindingMode 9.1.5003.9.10.3.1.2.10.10
Defines the SAS database binding mode: 0 - URI dependant 1 - according to user part. Access: Instant. AC INI-Param: SASBINDINGMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER uRI(0), userPartOnly(1)  

sipSASSurvivabilityMode 9.1.5003.9.10.3.1.2.10.11
Defines the SAS working mode: 0 - Standard Mode (working with configured proxy set) 1 - Always emergency mode (working without proxy) 2 - Ignore REGISTER in normal mode. Access: Instant. AC INI-Param: SASSURVIVABILITYMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER standard(0), alwaysEmergency(1), ignoreRegister(2)  

sipSASEnableENUM 9.1.5003.9.10.3.1.2.10.12
Enables SAS to perform ENUM query when receiving INVITE messages in emergency mode. Access: Instant. AC INI-Param: SASENABLEENUM
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sipSASEnableRecordRoute 9.1.5003.9.10.3.1.2.10.13
Enables SAS to add record-Route header to requests. Access: Instant. AC INI-Param: SASENABLERECORDROUTE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sasRegistrationManipulationTable 9.1.5003.9.10.3.1.2.10.21
GWAPP SAS Registration Manipulation Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SasRegistrationManipulationEntry

sasRegistrationManipulationEntry 9.1.5003.9.10.3.1.2.10.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SasRegistrationManipulationEntry  

sasRegistrationManipulationIndex 9.1.5003.9.10.3.1.2.10.21.1.1
AC INI-Param: SASRegistrationManipulation_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..0  

sasRegistrationManipulationRowStatus 9.1.5003.9.10.3.1.2.10.21.1.2
Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sasRegistrationManipulationAction 9.1.5003.9.10.3.1.2.10.21.1.3
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sasRegistrationManipulationActionResult 9.1.5003.9.10.3.1.2.10.21.1.4
Development Impending. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

sasRegistrationManipulationRemoveFromRight 9.1.5003.9.10.3.1.2.10.21.1.5
Access: Instant. AC INI-Param: SASRegistrationManipulation_RemoveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..30  

sasRegistrationManipulationLeaveFromRight 9.1.5003.9.10.3.1.2.10.21.1.6
Access: Instant. AC INI-Param: SASRegistrationManipulation_LeaveFromRight
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..30  

h323 9.1.5003.9.10.3.1.3
OBJECT IDENTIFIER    

h323SourceEncodType 9.1.5003.9.10.3.1.3.1
Calling number coding type in Setup message. Access: Instant. AC INI-Param: SOURCEENCODTYPE
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER e164(0), h323-Id(1), h323-IdAndE164(2), nPIAndTON(3), nPIAndTONAndH323-Id(4)  

h323DestEncodType 9.1.5003.9.10.3.1.3.2
Called number coding type in Setup message. Access: Instant. AC INI-Param: DESTENCODTYPE
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER e164(0), h323-Id(1), h323-IdAndE164(2), nPIAndTON(3), nPIAndTONAndH323-Id(4)  

h323H323IDString 9.1.5003.9.10.3.1.3.3
Definition of Gateway H.323-ID source field. Access: Instant. AC INI-Param: H323IDSTRING
Status: obsolete Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..25)  

h323ConnectionModes 9.1.5003.9.10.3.1.3.10
OBJECT IDENTIFIER    

h323ConnectionModesIsTunnelingUsed 9.1.5003.9.10.3.1.3.10.1
Use H.323 Tunneling call setup procedure. Access: Instant. AC INI-Param: ISTUNNELINGUSED
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

fastStart 9.1.5003.9.10.3.1.3.10.5
OBJECT IDENTIFIER    

fastStartIsFastConnectUsed 9.1.5003.9.10.3.1.3.10.5.1
Use H.323 Fast Start call setup procedure. Access: Instant. AC INI-Param: ISFASTCONNECTUSED
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

fastStartOpenH245OnFS 9.1.5003.9.10.3.1.3.10.5.2
Open H.245 when using Fast Start call setup procedure. Access: Instant. AC INI-Param: OPENH245ONFS
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2  

fastStartIsFSMediaInfoSendOnConnect 9.1.5003.9.10.3.1.3.10.5.3
Is Fast start Media sent in in Connect or in Alert. Access: Instant. AC INI-Param: ISFSMEDIAINFOSENDONCONNECT
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

fastStartIsFSOpenMediaOnConnect 9.1.5003.9.10.3.1.3.10.5.4
Open voice channel afer sending Connect or after sending Alert. Access: Instant. AC INI-Param: ISFSOPENMEDIAONCONNECT
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

h323GK 9.1.5003.9.10.3.1.3.11
OBJECT IDENTIFIER    

h323GKIsGateKeeperUsed 9.1.5003.9.10.3.1.3.11.1
Is gateway using a H.323 Gatekeeper. Access: Offline. AC INI-Param: ISGATEKEEPERUSED
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

h323GKGwRegistrType 9.1.5003.9.10.3.1.3.11.2
Type of Gatekeeper registration. Access: Instant. AC INI-Param: GWREGISTRTYPE
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER e164(0), h323-Id(1), h323-IdAndE164(2), nPIAndTON(3), nPIAndTONAndH323-Id(4)  

h323GKIsGkFallbackUsed 9.1.5003.9.10.3.1.3.11.3
Allow fallback to internal Tel to IP routing table if Gatekeeper/Proxy is not responding. Access: Offline. AC INI-Param: ISFALLBACKUSED
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

h323GKCanMapAliases 9.1.5003.9.10.3.1.3.11.4
If enabled, Gatekeeper can change gateway destination number using the Alias parameter in ACF message. Access: Instant. AC INI-Param: CANMAPALIASES
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

h323GKResponseTimeout 9.1.5003.9.10.3.1.3.11.5
Time in which the gateway waits for a RAS response from the Gatekeeper before retransmission (seconds). Access: Instant. AC INI-Param: RESPONSETIMEOUT
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..20  

h323GKMaxRetries 9.1.5003.9.10.3.1.3.11.6
Maximum number of retransmissions of RAS messages to Gatekeeper. Access: Instant. AC INI-Param: MAXRETRIES
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..20  

h323GKRegistrationTime 9.1.5003.9.10.3.1.3.11.7
Time in seconds for which registration to Gatekeeper/Proxy is valid. cause periodic registration. Access: Offline. AC INI-Param: REGISTRATIONTIME
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2000000  

h323GKIsTerminal 9.1.5003.9.10.3.1.3.11.8
The gateway registers as a H.323 terminal with multiple aliases. Otherwise, the gateway behaves as an H.323 gateway. Access: Instant. AC INI-Param: ISTERMINAL
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

h323GKGatekeeperID 9.1.5003.9.10.3.1.3.11.9
Gatekeeper Identification name, to be used in Registration Request (RRQ) messages. Access: Instant. AC INI-Param: GATEKEEPERID
Status: obsolete Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

h323GKEnablePregrantARQ 9.1.5003.9.10.3.1.3.11.10
ARQ message won't be sent if the Gatekeeper has pre-granted admission. Access: Instant. AC INI-Param: ENABLEPREGRANTARQ
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

h323GKRegister 9.1.5003.9.10.3.1.3.11.11
This parameter related to Register/UnRegister buttons. Access: Instant. AC INI-Param: SHOULDREGISTER
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

h323GKAlternativeGKUsed 9.1.5003.9.10.3.1.3.11.12
Allows working with Alternative GK that should be provided by GK. Access: Offline. AC INI-Param: ALTERNATIVEGKUSED
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

h323GKUseRedundantGKOnRRJ 9.1.5003.9.10.3.1.3.11.13
Useredundant Gatekeeper on receiving RRJ message. Access: Offline. AC INI-Param: USEREDUNDANTGKONRRJ
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

h323GKEnableGKAutoDiscovery 9.1.5003.9.10.3.1.3.11.14
Enables GK automatic discovery mechanism. Access: Offline. AC INI-Param: ENABLEGKAUTODISCOVERY
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

h323GKGKAutoDiscoveryIP 9.1.5003.9.10.3.1.3.11.15
Multicast IP Address for GK automatic discovery. Access: Offline. AC INI-Param: GKAUTODISCOVERYIP
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

gkIPTable 9.1.5003.9.10.3.1.3.11.21
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GkIPEntry

gkIPEntry 9.1.5003.9.10.3.1.3.11.21.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  GkIPEntry  

gkIPIndex 9.1.5003.9.10.3.1.3.11.21.1.1
Entry number, starting at 0. AC INI-Param: GateKeeperIp_Index
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4  

gkIPRowStatus 9.1.5003.9.10.3.1.3.11.21.1.2
This object allows entries to be created and deleted from the table. For Reference: RFC 1903, Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2). Access: Instant. AC INI-Param: N/A
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

gkIPAction 9.1.5003.9.10.3.1.3.11.21.1.3
Development Impending. AC INI-Param: N/A
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

gkIPActionResult 9.1.5003.9.10.3.1.3.11.21.1.4
Development Impending. AC INI-Param: N/A
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

gkIPGatekeeperIP 9.1.5003.9.10.3.1.3.11.21.1.5
IP of GK. Access: Offline. AC INI-Param: GateKeeperIp_IpAddress
Status: obsolete Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

gkIPGateleeperID 9.1.5003.9.10.3.1.3.11.21.1.6
ID of GK. Access: Offline. AC INI-Param: GateKeeperIp_Id
Status: obsolete Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

registerPrefixTable 9.1.5003.9.10.3.1.3.11.22
The registration prefixes are applicable for Digital E1/T1 and FXO gateways for registration to Gatekeeper. If not used the gateway will register with its endpoint phone numbers.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RegisterPrefixEntry

registerPrefixEntry 9.1.5003.9.10.3.1.3.11.22.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  RegisterPrefixEntry  

registerPrefixIndex 9.1.5003.9.10.3.1.3.11.22.1.1
Entry number, starting at 0. AC INI-Param: RegistrationPrefix_Index
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..9  

registerPrefixRowStatus 9.1.5003.9.10.3.1.3.11.22.1.2
This object allows entries to be created and deleted from the table. For Reference: RFC 1903, Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2). Access: Instant. AC INI-Param: N/A
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

registerPrefixAction 9.1.5003.9.10.3.1.3.11.22.1.3
Development Impending. AC INI-Param: N/A
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

registerPrefixActionResult 9.1.5003.9.10.3.1.3.11.22.1.4
Development Impending. AC INI-Param: N/A
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

registerPrefixPrefix 9.1.5003.9.10.3.1.3.11.22.1.5
Usually the prefixes will define range of PSTN/PBX phone numbers that the gateway can handle. Access: Offline. AC INI-Param: RegistrationPrefix_Prefix
Status: obsolete Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..11)  

registerPrefixNumberPlan 9.1.5003.9.10.3.1.3.11.22.1.6
Number Plan that will be used when Registration Type is PartyNumber. Access: Instant. AC INI-Param: RegistrationPrefix_NumberPlan
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), e164Public(1), private(9)  

registerPrefixNumberType 9.1.5003.9.10.3.1.3.11.22.1.7
Number Type that will be used when Registration Type is PartyNumber. Access: Instant. AC INI-Param: RegistrationPrefix_NumberType
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), international-Level2Regional(1), national-Level1Regional(2), networkSpecific-NetworkPISN(3), subscriber-Level0Regional(4), abbreviated(6)  

gkRedundancy 9.1.5003.9.10.3.1.3.11.30
OBJECT IDENTIFIER    

gkRedundancyUsed 9.1.5003.9.10.3.1.3.11.30.1
Allow Gatekeeper redundancy. At least one redundant Gatekeeper should be defined. Access: Instant. AC INI-Param: ISREDUNDANTGKUSED
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

gkRedundancyTimeBetweenGKsLoops 9.1.5003.9.10.3.1.3.11.30.2
Time between the gateway retries to connect to Gatekeeper if connection was lost (seconds). Access: Instant. AC INI-Param: TIMEBETWEENGKSLOOPS
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..120  

gkRAI 9.1.5003.9.10.3.1.3.11.31
OBJECT IDENTIFIER    

gkRAIEnable 9.1.5003.9.10.3.1.3.11.31.1
Enable sending of H.323 Resource Avaialable Indication message to Gatekeeper due to overload. Access: Instant. AC INI-Param: ENABLERAI
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

gkRAIHighThreshold 9.1.5003.9.10.3.1.3.11.31.2
Percentage of active calls in order to send 'Almost out of resources' RAI. Access: Instant. AC INI-Param: RAIHIGHTHRESHOLD
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

gkRAILowThreshold 9.1.5003.9.10.3.1.3.11.31.3
percentage of active calls to send 'Resources OK' RAI. Access: Instant. AC INI-Param: RAILOWTHRESHOLD
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

gkRAILoopTime 9.1.5003.9.10.3.1.3.11.31.4
Time period to check call resources (seconds). Access: Instant. AC INI-Param: RAILOOPTIME
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 1..200  

h323DTMF 9.1.5003.9.10.3.1.3.12
OBJECT IDENTIFIER    

h323DTMFHookFlashOption 9.1.5003.9.10.3.1.3.12.1
Detect and send Hook-Flash using the selected method. Access: Instant. AC INI-Param: HOOKFLASHOPTION
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER none(0), h245UserInput(1), h245Signal(2), q931UserInfo(3)  

h323DTMFRxDtmfOption 9.1.5003.9.10.3.1.3.12.2
Declare support for RFC 2833 in SDP. Access: Instant. AC INI-Param: ISFALLBACKUSED
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER none(0), h245UserInput(1), h245Signal(2), rFC2833(3), all(4)  

dTMFOptionsTable 9.1.5003.9.10.3.1.3.12.21
The names of the five possible coders.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DTMFOptionsEntry

dTMFOptionsEntry 9.1.5003.9.10.3.1.3.12.21.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  DTMFOptionsEntry  

dTMFOptionsIndex 9.1.5003.9.10.3.1.3.12.21.1.1
Entry number, starting at 0. AC INI-Param: N/A
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4  

dTMFOptionsRowStatus 9.1.5003.9.10.3.1.3.12.21.1.2
This object allows entries to be created and deleted from the table. For Reference: RFC 1903, Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2). Access: Instant. AC INI-Param: N/A
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

dTMFOptionsAction 9.1.5003.9.10.3.1.3.12.21.1.3
Development Impending. AC INI-Param: N/A
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

dTMFOptionsActionResult 9.1.5003.9.10.3.1.3.12.21.1.4
Development Impending. AC INI-Param: N/A
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER developmentImpending(0)  

dTMFOptionsTxDTMFOption 9.1.5003.9.10.3.1.3.12.21.1.5
Transmit DTMF option. Access: Instant. AC INI-Param: N/A
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER none(0), h245UserInput(1), h245Signal(2), q931UserInfo(3), rFC2833(4)  

h323Ports 9.1.5003.9.10.3.1.3.13
OBJECT IDENTIFIER    

h323PortsH225ListenPort 9.1.5003.9.10.3.1.3.13.1
Port on which the gateway expects to receive H.225 Setup messages. (Usually 1720). Access: Offline. AC INI-Param: H225LISTENPORT
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65534  

h323PortsH225DialPort 9.1.5003.9.10.3.1.3.13.2
Port on which the gateway sends H.225 Setup messages. (Usually 1720). Access: Offline. AC INI-Param: H225DIALPORT
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65534  

h323PortsH323BasePort 9.1.5003.9.10.3.1.3.13.3
Defines range for gateway H.225/H.245 local port messages. Access: Offline. AC INI-Param: H323BASEPORT
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65534  

h323PortsRasSourcePort 9.1.5003.9.10.3.1.3.13.4
RAS requests source port. Access: Instant. AC INI-Param: RASSOURCEPORT
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

h323PortsRasDestPort 9.1.5003.9.10.3.1.3.13.5
RAS requests destination port. Access: Instant. AC INI-Param: RASDESTPORT
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

h323Auth 9.1.5003.9.10.3.1.3.14
OBJECT IDENTIFIER    

h323AuthEnableH235Security 9.1.5003.9.10.3.1.3.14.1
Enable H.235 security. Access: Offline. AC INI-Param: ENABLEH235SECURITY
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

h323AuthUserName 9.1.5003.9.10.3.1.3.14.2
User Name used for authentication. Access: Instant. AC INI-Param: USERNAME
Status: obsolete Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

h323AuthPassword 9.1.5003.9.10.3.1.3.14.3
Password used for authentication. Access: Instant. AC INI-Param: PASSWORD
Status: obsolete Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..15)  

h323Misc 9.1.5003.9.10.3.1.3.15
OBJECT IDENTIFIER    

h323MiscIsSetupIncludeNum 9.1.5003.9.10.3.1.3.15.1
Setup message contains called party number. Access: Instant. AC INI-Param: ISSETUPINCLUDENUM
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

h323MiscIsSetupAckUsed 9.1.5003.9.10.3.1.3.15.2
Enable SetupAck messages for overlap mode. Access: Instant. AC INI-Param: ISSETUPACKUSED
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

h323MiscH245InitTimeOut 9.1.5003.9.10.3.1.3.15.3
h245.channelsTimeout value. Access: Offline. AC INI-Param: H245INITTIMEOUT
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..20000000  

h323MiscEnableQ931Cause 9.1.5003.9.10.3.1.3.15.4
H.225 Reason / Q.931 Cause is sent in H.323 Release Complete message. Access: Instant. AC INI-Param: ENABLEQ931CAUSE
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

h323MiscEnableQ931Multiplexing 9.1.5003.9.10.3.1.3.15.5
Use same socket for all H.225 messages. Access: Instant. AC INI-Param: ENABLEQ931MULTIPLEXING
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

h323MiscSendChannelNonStandard 9.1.5003.9.10.3.1.3.15.6
Send trunk and bchannel numbers on setup and call proceeding messages as nonStandard data. Access: Instant. AC INI-Param: SENDCHANNELNONSTANDARD
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

h323MiscH245RoundTripTime 9.1.5003.9.10.3.1.3.15.7
Time between H.245 Round Trip Delay messages (seconds). Access: Instant. AC INI-Param: H245ROUNDTRIPTIME
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2000000  

h323MiscProgressBehavior 9.1.5003.9.10.3.1.3.15.8
Interworking behavior of Progress message (0-Alert, 1-Progress). Access: Instant. AC INI-Param: H323PROGRESSBEHAVIOR
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER alert(0), progress(1)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor