AXIS-MIB

File: AXIS-MIB.mib (64601 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1215

Imported symbols

enterprises OBJECT-TYPE IpAddress
Counter Gauge TimeTicks
mgmt DisplayString PhysAddress
TRAP-TYPE

Defined Types

PortEntry  
SEQUENCE    
  portIndex INTEGER
  portDescr DisplayString
  portOnLine INTEGER
  portBusy INTEGER
  portEndOfForms INTEGER
  portFault INTEGER
  portOutputBytes Gauge
  portInputBytes Gauge
  portPrintouts Counter
  portAvailable INTEGER
  portIsInput INTEGER

PortStats  
SEQUENCE    
  portIndex INTEGER
  portOutputBytes Counter
  portInputBytes Counter

AdminMenu  
SEQUENCE    
  adminUnitStatus INTEGER
  adminConfigStatus INTEGER
  adminOldIntAddr IpAddress

ConfigMenu  
SEQUENCE    
  ethAddr PhysAddress
  rootPwd DisplayString
  users DisplayString
  hpJetadmin INTEGER
  axisPrintSystem INTEGER
  defOut INTEGER
  baseUrl DisplayString

TCPIPMenu  
SEQUENCE    
  intAddr IpAddress
  defRout IpAddress
  netMask IpAddress
  tcpEnb INTEGER
  tcpKey OCTET STRING
  prosPwd DisplayString
  prosPrt INTEGER
  lpdBanner INTEGER
  rtnOpt INTEGER
  rTelPr1 INTEGER
  rTelPr2 INTEGER
  rTelPr3 INTEGER
  rTelPr4 INTEGER
  rTelPr5 INTEGER
  rTelPr6 INTEGER
  rTelPr7 INTEGER
  rTelPr8 INTEGER
  dnsEnb INTEGER
  dnsPrimaryAddr IpAddress
  dnsSecondaryAddr IpAddress
  ipDomain DisplayString
  slpScopeList DisplayString
  winsEnb INTEGER
  winsPrimaryAddr IpAddress
  winsSecondaryAddr IpAddress
  nbtScopeId DisplayString
  dhcpEnb INTEGER
  bootpEnb INTEGER
  rarpEnb INTEGER

SnmpMenu  
SEQUENCE    
  readCommunity DisplayString
  writeCommunity DisplayString
  trapAddress IpAddress
  trapCommunity DisplayString
  enableAuthenTraps INTEGER
  enablePrinterTraps INTEGER

NetwareMenu  
SEQUENCE    
  netwEnb INTEGER
  psName DisplayString
  confServ DisplayString
  psPoll INTEGER
  autoScan INTEGER
  fr-802-3 INTEGER
  fr-eth-2 INTEGER
  fr-802-2 INTEGER
  fr-snap INTEGER
  login1 DisplayString
  login2 DisplayString
  login3 DisplayString
  login4 DisplayString
  login5 DisplayString
  login6 DisplayString
  login7 DisplayString
  login8 DisplayString
  login9 DisplayString
  login10 DisplayString
  login11 DisplayString
  login12 DisplayString
  login13 DisplayString
  login14 DisplayString
  login15 DisplayString
  login16 DisplayString
  rprinter1 DisplayString
  rprinter2 DisplayString
  rprinter3 DisplayString
  rprinter4 DisplayString
  rprinter5 DisplayString
  rprinter6 DisplayString
  rprinter7 DisplayString
  rprinter8 DisplayString

LServLMgrMenu  
SEQUENCE    
  lslmEnb INTEGER
  lslmFrameType INTEGER
  lPrint1 DisplayString
  lLogic1 INTEGER
  lPrint2 DisplayString
  lLogic2 INTEGER
  lPrint3 DisplayString
  lLogic3 INTEGER
  lPrint4 DisplayString
  lLogic4 INTEGER
  lPrint5 DisplayString
  lLogic5 INTEGER
  lPrint6 DisplayString
  lLogic6 INTEGER
  lPrint7 DisplayString
  lLogic7 INTEGER
  lPrint8 DisplayString
  lLogic8 INTEGER

AppletalkMenu  
SEQUENCE    
  atlkEnb INTEGER
  atlkKey OCTET STRING
  atlkZone DisplayString
  atlkHPZoner INTEGER
  atlkFont INTEGER
  atlkBinary INTEGER
  atlkBinaryType INTEGER
  aPrint1 DisplayString
  aType1 DisplayString
  aLogic1 INTEGER
  aBinaryType1 INTEGER
  aPrint2 DisplayString
  aType2 DisplayString
  aLogic2 INTEGER
  aBinaryType2 INTEGER
  aPrint3 DisplayString
  aType3 DisplayString
  aLogic3 INTEGER
  aBinaryType3 INTEGER

LogPrEntry  
SEQUENCE    
  logPrIndex INTEGER
  logPrOut INTEGER
  logPrScnd INTEGER
  logPrWait INTEGER
  logPrIn INTEGER
  logPrBef OCTET STRING
  logPrStr OCTET STRING
  logPrCset INTEGER
  logPrFilt INTEGER
  logPrAft OCTET STRING
  logPrDump INTEGER
  logPrSize INTEGER
  logPrOrnt INTEGER
  logPrForm DisplayString
  logPrFont DisplayString

OutputMenu  
SEQUENCE    
  centrLPT1 INTEGER
  bsyTimLPT1 INTEGER
  mgmInfoLPT1 INTEGER
  comLPT1 DisplayString
  bidirLPT1 INTEGER
  readTimCOM1 INTEGER
  handshCOM1 INTEGER
  baudrCOM1 INTEGER
  stopBitsCOM1 INTEGER
  parityCOM1 INTEGER
  noBitsCOM1 INTEGER
  bsyTimCOM1 INTEGER
  mgmInfoCOM1 INTEGER
  comCOM1 DisplayString
  centrLPT2 INTEGER
  bsyTimLPT2 INTEGER
  mgmInfoLPT2 INTEGER
  comLPT2 DisplayString
  bidirLPT2 INTEGER

PanelMenu  
SEQUENCE    
  defOut INTEGER

NDS-NetwareMenu  
SEQUENCE    
  nds-netwEnb INTEGER
  nds-psName DisplayString
  jobCheckDelay INTEGER
  confCheckDelay INTEGER
  nds-fr-802-3 INTEGER
  nds-fr-eth-2 INTEGER
  nds-fr-802-2 INTEGER
  nds-fr-snap INTEGER
  pserverNDS DisplayString
  pserverBindery1 DisplayString
  pserverBindery2 DisplayString
  pserverBindery3 DisplayString
  pserverBindery4 DisplayString
  pserverBindery5 DisplayString
  pserverBindery6 DisplayString
  pserverBindery7 DisplayString
  pserverBindery8 DisplayString
  pserverBindery9 DisplayString
  pserverBindery10 DisplayString
  pserverBindery11 DisplayString
  pserverBindery12 DisplayString
  pserverBindery13 DisplayString
  pserverBindery14 DisplayString
  pserverBindery15 DisplayString
  pserverBindery16 DisplayString
  nprinter1 DisplayString
  nprinter2 DisplayString
  nprinter3 DisplayString
  nprinter4 DisplayString
  nprinter5 DisplayString
  nprinter6 DisplayString
  nprinter7 DisplayString
  nprinter8 DisplayString

Defined Values

mib-2 1.3.6.1.2.1
OBJECT IDENTIFIER    

snmp 1.3.6.1.2.1.11
OBJECT IDENTIFIER    

axis 1.3.6.1.4.1.368
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.368.1
OBJECT IDENTIFIER    


status 1.3.6.1.4.1.368.2.1
OBJECT IDENTIFIER    

admin 1.3.6.1.4.1.368.2.2
OBJECT IDENTIFIER    

setup 1.3.6.1.4.1.368.2.3
OBJECT IDENTIFIER    

nps 1.3.6.1.4.1.368.1.1
OBJECT IDENTIFIER    

config 1.3.6.1.4.1.368.2.3.1
OBJECT IDENTIFIER    

tcpip 1.3.6.1.4.1.368.2.3.2
OBJECT IDENTIFIER    

snmpcontrol 1.3.6.1.4.1.368.2.3.3
OBJECT IDENTIFIER    

netware 1.3.6.1.4.1.368.2.3.4
OBJECT IDENTIFIER    

lservlmgr 1.3.6.1.4.1.368.2.3.5
OBJECT IDENTIFIER    

apple 1.3.6.1.4.1.368.2.3.6
OBJECT IDENTIFIER    

logicals 1.3.6.1.4.1.368.2.3.7
OBJECT IDENTIFIER    

output 1.3.6.1.4.1.368.2.3.8
OBJECT IDENTIFIER    

panel 1.3.6.1.4.1.368.2.3.9
OBJECT IDENTIFIER    

nds-netware 1.3.6.1.4.1.368.2.3.10
OBJECT IDENTIFIER    

ports 1.3.6.1.4.1.368.2.1.1
OBJECT IDENTIFIER    

portNumber 1.3.6.1.4.1.368.2.1.1.1
The number of ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portTable 1.3.6.1.4.1.368.2.1.1.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.368.2.1.1.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortEntry  

portIndex 1.3.6.1.4.1.368.2.1.1.2.1.1
The port's number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portDescr 1.3.6.1.4.1.368.2.1.1.2.1.2
The port descriptor, name and type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

portOnLine 1.3.6.1.4.1.368.2.1.1.2.1.3
The port's On-Line status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on-line(1), off-line(2), no-value(3)  

portBusy 1.3.6.1.4.1.368.2.1.1.2.1.4
The port's Busy status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), busy(2)  

portEndOfForms 1.3.6.1.4.1.368.2.1.1.2.1.5
The port's End-of-Forms status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-error(1), end-of-forms(2), no-value(3)  

portFault 1.3.6.1.4.1.368.2.1.1.2.1.6
The port's Fault status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-error(1), fault(2), no-value(3)  

portOutputBytes 1.3.6.1.4.1.368.2.1.1.2.1.7
The number of bytes sent out on the port during a printout in progress or the last printout.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portInputBytes 1.3.6.1.4.1.368.2.1.1.2.1.8
The number of bytes received on the port during a printout in progress or the last printout.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portPrintouts 1.3.6.1.4.1.368.2.1.1.2.1.9
The number of printouts started on the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portAvailable 1.3.6.1.4.1.368.2.1.1.2.1.10
If the port is assigned for a printout.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER available(1), printing(2)  

portIsInput 1.3.6.1.4.1.368.2.1.1.2.1.11
If the port is assigned as an input port (bidirectional).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

adminUnitStatus 1.3.6.1.4.1.368.2.2.1
The units's operational status. A other than (1) will reset the unit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER running(1), softReset(2), hardReset(3)  

adminConfigStatus 1.3.6.1.4.1.368.2.2.2
The units's configuration status. read-only values: (1) reserved for future use. (2) reserved for future use. write-only values : (3) will load permanent values . (4) will save current configuration permanently. (5) load default configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER configUnknown(1), configUnknown(2), configLoadRequest(3), configSaveRequest(4), configDefaultRequest(5)  

adminOldIntAddr 1.3.6.1.4.1.368.2.2.3
The Internet Address at power-on or before change by RARP or 'arp -s'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ethAddr 1.3.6.1.4.1.368.2.3.1.2
The Ethernet Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

rootPwd 1.3.6.1.4.1.368.2.3.1.7
The Root Password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

users 1.3.6.1.4.1.368.2.3.1.8
The User Defintions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

hpJetadmin 1.3.6.1.4.1.368.2.3.1.13
HP JetAdmin Support.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

axisPrintSystem 1.3.6.1.4.1.368.2.3.1.15
The AXIS Print System enable switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

defOut 1.3.6.1.4.1.368.2.3.1.60
Internal Printout Destination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

baseUrl 1.3.6.1.4.1.368.2.3.1.17
The base URL.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

intAddr 1.3.6.1.4.1.368.2.3.2.1
The Internet Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

defRout 1.3.6.1.4.1.368.2.3.2.3
The Default Router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

netMask 1.3.6.1.4.1.368.2.3.2.4
The Net Mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

tcpEnb 1.3.6.1.4.1.368.2.3.2.5
The TCP protocol stack enable switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

tcpKey 1.3.6.1.4.1.368.2.3.2.6
The TCP protocol stack enable software key.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

prosPwd 1.3.6.1.4.1.368.2.3.2.9
The PROS password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

prosPrt 1.3.6.1.4.1.368.2.3.2.11
The PROS TCP Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lpdBanner 1.3.6.1.4.1.368.2.3.2.12
The LPD banner page switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), auto(1), last(2)  

rtnOpt 1.3.6.1.4.1.368.2.3.2.18
The Reverse Telnet option handling switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

rTelPr1 1.3.6.1.4.1.368.2.3.2.601
The TCP port for reverse Telnet to logical printer 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rTelPr2 1.3.6.1.4.1.368.2.3.2.602
The TCP port for reverse Telnet to logical printer 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rTelPr3 1.3.6.1.4.1.368.2.3.2.603
The TCP port for reverse Telnet to logical printer 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rTelPr4 1.3.6.1.4.1.368.2.3.2.604
The TCP port for reverse Telnet to logical printer 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rTelPr5 1.3.6.1.4.1.368.2.3.2.605
The TCP port for reverse Telnet to logical printer 5.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rTelPr6 1.3.6.1.4.1.368.2.3.2.606
The TCP port for reverse Telnet to logical printer 6.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rTelPr7 1.3.6.1.4.1.368.2.3.2.607
The TCP port for reverse Telnet to logical printer 7.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rTelPr8 1.3.6.1.4.1.368.2.3.2.608
The TCP port for reverse Telnet to logical printer 8.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dnsEnb 1.3.6.1.4.1.368.2.3.2.670
The DNS on/off switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

dnsPrimaryAddr 1.3.6.1.4.1.368.2.3.2.671
The Primary DNS Server Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dnsSecondaryAddr 1.3.6.1.4.1.368.2.3.2.672
The Secondary DNS Server Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipDomain 1.3.6.1.4.1.368.2.3.2.673
The Domain Name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

slpScopeList 1.3.6.1.4.1.368.2.3.2.680
The SLP Scope List.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winsEnb 1.3.6.1.4.1.368.2.3.2.692
The WINS on/off switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

winsPrimaryAddr 1.3.6.1.4.1.368.2.3.2.693
The Primary WINS Server Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

winsSecondaryAddr 1.3.6.1.4.1.368.2.3.2.694
The Secondary WINS Server Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

nbtScopeId 1.3.6.1.4.1.368.2.3.2.695
The NBT Scope ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

dhcpEnb 1.3.6.1.4.1.368.2.3.2.696
The dhcp on/off switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

bootpEnb 1.3.6.1.4.1.368.2.3.2.698
The bootp on/off switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

rarpEnb 1.3.6.1.4.1.368.2.3.2.699
The rarp on/off switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

readCommunity 1.3.6.1.4.1.368.2.3.3.701
The community having read-only access to all objects except WriteCommunity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

writeCommunity 1.3.6.1.4.1.368.2.3.3.702
The community having full access to all objects.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

trapAddress 1.3.6.1.4.1.368.2.3.3.705
The IP address to send traps to. No traps if set to 0.0.0.0 .
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

trapCommunity 1.3.6.1.4.1.368.2.3.3.706
The community used when sending traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

enableAuthenTraps 1.3.6.1.4.1.368.2.3.3.715
Same as snmpEnableAuthenTraps in MIB-II.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enablePrinterTraps 1.3.6.1.4.1.368.2.3.3.716
Enables the enterprise specific 'trapPrinter' traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

netwEnb 1.3.6.1.4.1.368.2.3.4.400
The NetWare protocol stack enable switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

psName 1.3.6.1.4.1.368.2.3.4.401
The NetWare print server name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

confServ 1.3.6.1.4.1.368.2.3.4.402
The NetWare configuration file server name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

psPoll 1.3.6.1.4.1.368.2.3.4.405
The NetWare print server poll time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

autoScan 1.3.6.1.4.1.368.2.3.4.406
Determines scanning mode of print server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), pserver(2), rprinter(3), both(4)  

fr-802-3 1.3.6.1.4.1.368.2.3.4.420
The 802.3 frame support switch for NetWare.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

fr-eth-2 1.3.6.1.4.1.368.2.3.4.421
The Ethernet-2 frame support switch for NetWare.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

fr-802-2 1.3.6.1.4.1.368.2.3.4.422
The 802.2 frame support switch for NetWare.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

fr-snap 1.3.6.1.4.1.368.2.3.4.423
The SNAP frame support switch for NetWare.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

login1 1.3.6.1.4.1.368.2.3.4.432
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login2 1.3.6.1.4.1.368.2.3.4.433
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login3 1.3.6.1.4.1.368.2.3.4.434
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login4 1.3.6.1.4.1.368.2.3.4.435
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login5 1.3.6.1.4.1.368.2.3.4.436
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login6 1.3.6.1.4.1.368.2.3.4.437
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login7 1.3.6.1.4.1.368.2.3.4.438
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login8 1.3.6.1.4.1.368.2.3.4.439
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login9 1.3.6.1.4.1.368.2.3.4.440
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login10 1.3.6.1.4.1.368.2.3.4.441
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login11 1.3.6.1.4.1.368.2.3.4.442
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login12 1.3.6.1.4.1.368.2.3.4.443
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login13 1.3.6.1.4.1.368.2.3.4.444
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login14 1.3.6.1.4.1.368.2.3.4.445
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login15 1.3.6.1.4.1.368.2.3.4.446
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

login16 1.3.6.1.4.1.368.2.3.4.447
File server, print queue and logical printer def. .
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rprinter1 1.3.6.1.4.1.368.2.3.4.470
Pserver name and printer number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rprinter2 1.3.6.1.4.1.368.2.3.4.471
Pserver name and printer number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rprinter3 1.3.6.1.4.1.368.2.3.4.472
Pserver name and printer number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rprinter4 1.3.6.1.4.1.368.2.3.4.473
Pserver name and printer number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rprinter5 1.3.6.1.4.1.368.2.3.4.474
Pserver name and printer number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rprinter6 1.3.6.1.4.1.368.2.3.4.475
Pserver name and printer number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rprinter7 1.3.6.1.4.1.368.2.3.4.476
Pserver name and printer number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rprinter8 1.3.6.1.4.1.368.2.3.4.477
Pserver name and printer number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

lslmEnb 1.3.6.1.4.1.368.2.3.5.800
The Lan Serv/Lan Mgr protocol stack enable switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

lslmFrameType 1.3.6.1.4.1.368.2.3.5.801
Determines which frame type to use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), fr-802-2(2), dix(3)  

lPrint1 1.3.6.1.4.1.368.2.3.5.810
The Lan Serv/Lan Mgr printer 1 name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

lLogic1 1.3.6.1.4.1.368.2.3.5.811
The Lan Serv/Lan Mgr printer 1's logical printer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

lPrint2 1.3.6.1.4.1.368.2.3.5.820
The Lan Serv/Lan Mgr printer 1 name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

lLogic2 1.3.6.1.4.1.368.2.3.5.821
The Lan Serv/Lan Mgr printer 1's logical printer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

lPrint3 1.3.6.1.4.1.368.2.3.5.830
The Lan Serv/Lan Mgr printer 3 name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

lLogic3 1.3.6.1.4.1.368.2.3.5.831
The Lan Serv/Lan Mgr printer 3's logical printer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

lPrint4 1.3.6.1.4.1.368.2.3.5.840
The Lan Serv/Lan Mgr printer 4 name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

lLogic4 1.3.6.1.4.1.368.2.3.5.841
The Lan Serv/Lan Mgr printer 4's logical printer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

lPrint5 1.3.6.1.4.1.368.2.3.5.850
The Lan Serv/Lan Mgr printer 5 name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

lLogic5 1.3.6.1.4.1.368.2.3.5.851
The Lan Serv/Lan Mgr printer 5's logical printer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

lPrint6 1.3.6.1.4.1.368.2.3.5.860
The Lan Serv/Lan Mgr printer 6 name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

lLogic6 1.3.6.1.4.1.368.2.3.5.861
The Lan Serv/Lan Mgr printer 6's logical printer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

lPrint7 1.3.6.1.4.1.368.2.3.5.870
The Lan Serv/Lan Mgr printer 7 name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

lLogic7 1.3.6.1.4.1.368.2.3.5.871
The Lan Serv/Lan Mgr printer 7's logical printer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

lPrint8 1.3.6.1.4.1.368.2.3.5.880
The Lan Serv/Lan Mgr printer 8 name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

lLogic8 1.3.6.1.4.1.368.2.3.5.881
The Lan Serv/Lan Mgr printer 8's logical printer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

atlkEnb 1.3.6.1.4.1.368.2.3.6.500
The AppleTalk protocol stack enable switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

atlkKey 1.3.6.1.4.1.368.2.3.6.501
The AppleTalk protocol stack software key.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

atlkZone 1.3.6.1.4.1.368.2.3.6.502
The AppleTalk zone name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atlkHPZoner 1.3.6.1.4.1.368.2.3.6.503
Enable/Disable support for HP Zoner.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

atlkFont 1.3.6.1.4.1.368.2.3.6.504
How to respond to a FontListQuery.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default(1), f35n(2), all(3)  

atlkBinary 1.3.6.1.4.1.368.2.3.6.505
Support binary files or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

atlkBinaryType 1.3.6.1.4.1.368.2.3.6.506
Specifies which Binary Communications Protocol to use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tbcp(1), bcp(2)  

aPrint1 1.3.6.1.4.1.368.2.3.6.510
The AppleTalk printer 1 name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

aType1 1.3.6.1.4.1.368.2.3.6.511
The AppleTalk printer 1 type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

aLogic1 1.3.6.1.4.1.368.2.3.6.512
The AppleTalk printer 1's logical printer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

aBinaryType1 1.3.6.1.4.1.368.2.3.6.513
Specifies which Binary Communications Protocol to use for AppleTalk printer 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tbcp(1), bcp(2), none(3)  

aPrint2 1.3.6.1.4.1.368.2.3.6.520
The AppleTalk printer 2 name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

aType2 1.3.6.1.4.1.368.2.3.6.521
The AppleTalk printer 2 type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

aLogic2 1.3.6.1.4.1.368.2.3.6.522
The AppleTalk printer 2's logical printer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

aBinaryType2 1.3.6.1.4.1.368.2.3.6.523
Specifies which Binary Communications Protocol to use for AppleTalk printer 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tbcp(1), bcp(2), none(3)  

aPrint3 1.3.6.1.4.1.368.2.3.6.530
The AppleTalk printer 3 name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

aType3 1.3.6.1.4.1.368.2.3.6.531
The AppleTalk printer 3 type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

aLogic3 1.3.6.1.4.1.368.2.3.6.532
The AppleTalk printer 3's logical printer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

aBinaryType3 1.3.6.1.4.1.368.2.3.6.533
Specifies which Binary Communications Protocol to use for AppleTalk printer 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tbcp(1), bcp(2), none(3)  

logPrNumber 1.3.6.1.4.1.368.2.3.7.1
The number of logical printers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

logPrTable 1.3.6.1.4.1.368.2.3.7.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LogPrEntry

logPrEntry 1.3.6.1.4.1.368.2.3.7.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LogPrEntry  

logPrIndex 1.3.6.1.4.1.368.2.3.7.2.1.1
The logical printer's number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

logPrOut 1.3.6.1.4.1.368.2.3.7.2.1.2
The logical printer's output port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER lpt1(1), com1(2), lpt2(3)  

logPrScnd 1.3.6.1.4.1.368.2.3.7.2.1.3
The logical printer's secondary output port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

logPrWait 1.3.6.1.4.1.368.2.3.7.2.1.4
The logical printer's wait for printer available switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

logPrIn 1.3.6.1.4.1.368.2.3.7.2.1.5
The logical printer's input port. If set to auto, the Print Server will try to use the port specified as output port for both output and input.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER com1(2), none(4), auto(5)  

logPrBef 1.3.6.1.4.1.368.2.3.7.2.1.7
The logical printer's string-before-job.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

logPrStr 1.3.6.1.4.1.368.2.3.7.2.1.8
The logical printer's string-to-string substitution defs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

logPrCset 1.3.6.1.4.1.368.2.3.7.2.1.10
The logical printer's character set conversion table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), iso-to-ibm(2), uk-to-ibm7(3), sw-to-ibm7(4), ge-to-ibm7(5), fr-to-ibm7(6), nd-to-ibm7(7), dec-to-ibm(8)  

logPrFilt 1.3.6.1.4.1.368.2.3.7.2.1.11
The logical printer's data stream filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), postscr(2), autops(3)  

logPrAft 1.3.6.1.4.1.368.2.3.7.2.1.12
The logical printer's string-after-job.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

logPrDump 1.3.6.1.4.1.368.2.3.7.2.1.14
The logical printer's hexdump filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

logPrSize 1.3.6.1.4.1.368.2.3.7.2.1.17
The logical printer's ASCII-to-PostScript conversion page size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a4(1), letter(2), legal(3), execut(4)  

logPrOrnt 1.3.6.1.4.1.368.2.3.7.2.1.18
The logical printer's ASCII-to-PostScript conversion page orientation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER portr(1), lands(2), rportr(3), rlands(4)  

logPrForm 1.3.6.1.4.1.368.2.3.7.2.1.19
The logical printer's ASCII-to-PostScript conversion page format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

logPrFont 1.3.6.1.4.1.368.2.3.7.2.1.20
The logical printer's PostScript font.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

centrLPT1 1.3.6.1.4.1.368.2.3.8.20
The LPT1 port speed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ibmpc(1), stndrd(2), fast(3), hispeed(4)  

bsyTimLPT1 1.3.6.1.4.1.368.2.3.8.21
The LPT1 busy time-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mgmInfoLPT1 1.3.6.1.4.1.368.2.3.8.22
Get management information on LPT1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), disable(2)  

comLPT1 1.3.6.1.4.1.368.2.3.8.23
Printer comment for printer on LPT1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

bidirLPT1 1.3.6.1.4.1.368.2.3.8.24
LPT1 bidirectional control.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), auto(2)  

readTimCOM1 1.3.6.1.4.1.368.2.3.8.27
The COM1 input time-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

handshCOM1 1.3.6.1.4.1.368.2.3.8.29
The COM1 handshake mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), xonxoff(2), robust(3), rdybsy(4), both(5), robustBoth(6)  

baudrCOM1 1.3.6.1.4.1.368.2.3.8.30
The COM1 baudrate. The settings b57600 and b115200 are not valid for all products, please refer to the corresponding User Manual.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b300(1), b600(2), b1200(3), b2400(4), b4800(5), b9600(6), b19200(7), b38400(8), b57600(9), b115200(10)  

stopBitsCOM1 1.3.6.1.4.1.368.2.3.8.31
The COM1 no of stopbits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2)  

parityCOM1 1.3.6.1.4.1.368.2.3.8.32
The COM1 no of parity bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3)  

noBitsCOM1 1.3.6.1.4.1.368.2.3.8.33
The COM1 no of bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER seven(1), eight(2)  

bsyTimCOM1 1.3.6.1.4.1.368.2.3.8.34
The COM1 busy time-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mgmInfoCOM1 1.3.6.1.4.1.368.2.3.8.35
Get management information on COM1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), disable(2)  

comCOM1 1.3.6.1.4.1.368.2.3.8.36
Printer comment for printer on COM1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

centrLPT2 1.3.6.1.4.1.368.2.3.8.40
The LPT2 port speed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ibmpc(1), stndrd(2), fast(3), hispeed(4)  

bsyTimLPT2 1.3.6.1.4.1.368.2.3.8.41
The LPT2 busy time-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mgmInfoLPT2 1.3.6.1.4.1.368.2.3.8.42
Get management information on LPT2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), disable(2)  

comLPT2 1.3.6.1.4.1.368.2.3.8.43
Printer comment for printer on LPT2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

bidirLPT2 1.3.6.1.4.1.368.2.3.8.44
LPT2 bidirectional control.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), auto(2)  

defOut 1.3.6.1.4.1.368.2.3.9.60
The default logical printer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pr1(1), pr2(2), pr3(3), pr4(4), pr5(5), pr6(6), pr7(7), pr8(8), lpt1(9), com1(10), lpt2(11)  

nds-netwEnb 1.3.6.1.4.1.368.2.3.10.900
The NetWare protocol stack enable switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nds-psName 1.3.6.1.4.1.368.2.3.10.901
The print server name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nds-netwProt 1.3.6.1.4.1.368.2.3.10.902
The NetWare protocol switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ipx(1), ip(2), dual(3)  

jobCheckDelay 1.3.6.1.4.1.368.2.3.10.920
Print queue polling interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

confCheckDelay 1.3.6.1.4.1.368.2.3.10.921
Configuration scanning interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nds-fr-802-3 1.3.6.1.4.1.368.2.3.10.910
The 802.3 frame support switch for NetWare.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nds-fr-eth-2 1.3.6.1.4.1.368.2.3.10.911
The Ethernet-2 frame support switch for NetWare.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nds-fr-802-2 1.3.6.1.4.1.368.2.3.10.912
The 802.2 frame support switch for NetWare.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nds-fr-snap 1.3.6.1.4.1.368.2.3.10.913
The SNAP frame support switch for NetWare.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pserverNDS 1.3.6.1.4.1.368.2.3.10.926
Initial file server and NDS print server name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery1 1.3.6.1.4.1.368.2.3.10.930
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery2 1.3.6.1.4.1.368.2.3.10.931
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery3 1.3.6.1.4.1.368.2.3.10.932
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery4 1.3.6.1.4.1.368.2.3.10.933
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery5 1.3.6.1.4.1.368.2.3.10.934
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery6 1.3.6.1.4.1.368.2.3.10.935
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery7 1.3.6.1.4.1.368.2.3.10.936
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery8 1.3.6.1.4.1.368.2.3.10.937
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery9 1.3.6.1.4.1.368.2.3.10.938
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery10 1.3.6.1.4.1.368.2.3.10.939
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery11 1.3.6.1.4.1.368.2.3.10.940
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery12 1.3.6.1.4.1.368.2.3.10.941
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery13 1.3.6.1.4.1.368.2.3.10.942
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery14 1.3.6.1.4.1.368.2.3.10.943
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery15 1.3.6.1.4.1.368.2.3.10.944
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pserverBindery16 1.3.6.1.4.1.368.2.3.10.945
Bindery file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nprinter1 1.3.6.1.4.1.368.2.3.10.970
Pserver name and slot number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nprinter2 1.3.6.1.4.1.368.2.3.10.971
Pserver name and slot number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nprinter3 1.3.6.1.4.1.368.2.3.10.972
Pserver name and slot number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nprinter4 1.3.6.1.4.1.368.2.3.10.973
Pserver name and slot number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nprinter5 1.3.6.1.4.1.368.2.3.10.974
Pserver name and slot number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nprinter6 1.3.6.1.4.1.368.2.3.10.975
Pserver name and slot number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nprinter7 1.3.6.1.4.1.368.2.3.10.976
Pserver name and slot number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nprinter8 1.3.6.1.4.1.368.2.3.10.977
Pserver name and slot number on pserver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

coldStart 0
A coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation may be altered.
TRAP-TYPE    

authenticationFailure 4
An authenticationFailure trap signifies that the sending protocol entity is the addressee of a protocol message that is not properly authenticated. While implementations of the SNMP must be capable of generating this trap, they must also be capable of suppressing the emission of such traps via an implementation- specific mechanism.
TRAP-TYPE    

trapPrinter 1
A printer error has occurred.
TRAP-TYPE    

trapNewIPaddr 2
The IP address has been changed by RARP or an 'arp -s'.
TRAP-TYPE