AVENTAIL-FIPS-MIBS

File: AVENTAIL-FIPS-MIBS.mib (4120 bytes)

Imported modules

AVENTAIL-MIB HOST-RESOURCES-MIB SNMPv2-SMI

Imported symbols

aventail InternationalDisplayString OBJECT-TYPE
Integer32 NOTIFICATION-TYPE MODULE-IDENTITY

Defined Values

aventailFIPS 1.3.6.1.4.1.4331.6
This Aventail MIB provides FIPS Statistics
MODULE-IDENTITY    

fipsCardState 1.3.6.1.4.1.4331.6.1
This oid conveys the state of the FIPS Card. \ A string 'NO-FIPS-HWACCEL-SUPPORT' is displayed \ in case of no hardware support. \ If the hardware server is running, either of the two \ strings will be displayed based on the appliance \ configuration: FIPS - SERVER - UP: LEVEL 2 or \ FIPS - SERVER - UP: LEVEL 3. \ If the hardware server is not running, \ FIPS-SERVER-NOT-RUNNING string will be displayed \ and if licensing itself is generating error, \ then NOT-APPLICABLE string will be displayed.
Status: current Access: read-only
OBJECT-TYPE    
  InternationalDisplayString  

smartCardState 1.3.6.1.4.1.4331.6.2
This oid conveys the state of the Smart Card. \ A string 'NO-FIPS-HWACCEL-SUPPORT' is displayed \ in case of no hardware support. If the hardware \ server is not running, FIPS-SERVER-NOT-RUNNING \ string will be displayed and if licensing itself is \ generating error, then NOT-APPLICABLE string \ will be displayed. if Operator smart card is inserted in the slot then, \ OPERATOR-CARD-IN-SLOT' message is displayed. \ If Admin smart card is inserted in the slot then, \ ADMIN-CARD-IN-SLOT' message is displayed. If the smart card is faulty then, \ FAULTY-CARD-IN-SLOT' message is displayed. \ if the smart card is unformatted then, \ 'UNFORMATTED-CARD-IN-SLOT' message is displayed. \ If smart card slot is empty then, \ 'NO-CARD-IN-SLOT' message is displayed.
Status: current Access: read-only
OBJECT-TYPE    
  InternationalDisplayString  

hsUptime 1.3.6.1.4.1.4331.6.3
A textual string describing FIPS card up time in seconds\ This field will display string as NO-FIPS-HWACCEL-SUPPORT \ if hardware support is not provided. \ If the hardware server is not running, \ FIPS-SERVER-NOT-RUNNING \ string will be displayed and if licensing itself is \ generating error, then NOT-APPLICABLE string \ will be displayed.
Status: current Access: read-only
OBJECT-TYPE    
  InternationalDisplayString  

fipsCardStateChange 1.3.6.1.4.1.4331.6.100
Notification of state of change for FIPS hardware \ card. This trap will provide information about the \ current FIPS card state.
Status: current Access: read-only
NOTIFICATION-TYPE