AVAYA-FABRIC-ATTACH-MIB

File: AVAYA-FABRIC-ATTACH-MIB.mib (62465 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMP-FRAMEWORK-MIB
SYNOPTICS-ROOT-MIB SNMPv2-TC

Imported symbols

MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
Unsigned32 Integer32 Counter32
MODULE-COMPLIANCE OBJECT-GROUP SnmpAdminString
bayStackMibs RowStatus TruthValue

Defined Types

AvFabricAttachIsidVlanAsgnsEntry  
SEQUENCE    
  avFabricAttachIsidVlanAsgnsIfIndex Integer32
  avFabricAttachIsidVlanAsgnsIsid Integer32
  avFabricAttachIsidVlanAsgnsVlan Integer32
  avFabricAttachIsidVlanAsgnsState INTEGER
  avFabricAttachIsidVlanAsgnsRowStatus RowStatus
  avFabricAttachIsidVlanAsgnsOrigin INTEGER

AvFabricAttachPortEntry  
SEQUENCE    
  avFabricAttachPortIfIndex Integer32
  avFabricAttachPortState INTEGER
  avFabricAttachPortRowStatus RowStatus
  avFabricAttachPortMsgAuthStatus INTEGER
  avFabricAttachPortMsgAuthKey OCTET STRING
  avFabricAttachPortMgmtIsid Integer32
  avFabricAttachPortMgmtCvid Integer32
  avFabricAttachPortMsgAuthKeymode INTEGER

AvFabricAttachDiscElemsEntry  
SEQUENCE    
  avFabricAttachDiscElemsIfIndex Integer32
  avFabricAttachDiscElemsElementType INTEGER
  avFabricAttachDiscElemsElementVlan Integer32
  avFabricAttachDiscElemsElementId OCTET STRING
  avFabricAttachDiscElemsElementState BITS
  avFabricAttachDiscElemsElementAuth INTEGER
  avFabricAttachDiscElemsElementTrunkId Integer32
  avFabricAttachDiscElemsElementOperAuthStatus INTEGER
  avFabricAttachDiscElemsElementAsgnsOperAuthStatus INTEGER
  avFabricAttachDiscElemsAsgnsAuth INTEGER

AvFabricAttachZeroTouchNsvEntry  
SEQUENCE    
  avFabricAttachZeroTouchNsvType Integer32
  avFabricAttachZeroTouchNsvVlan Integer32
  avFabricAttachZeroTouchNsvPortPriority Integer32
  avFabricAttachZeroTouchNsvStateFlags BITS
  avFabricAttachZeroTouchNsvRowStatus RowStatus
  avFabricAttachZeroTouchNsvIsid Integer32

AvFabricAttachStatsEntry  
SEQUENCE    
  avFabricAttachStatsPortIndex Integer32
  avFabricAttachStatsDiscElemReceived Counter32
  avFabricAttachStatsAsgnReceived Counter32
  avFabricAttachStatsAsgnAccepted Counter32
  avFabricAttachStatsAsgnRejected Counter32
  avFabricAttachStatsAsgnExpired Counter32
  avFabricAttachStatsDiscAuthFailed Counter32
  avFabricAttachStatsDiscElemExpired Counter32
  avFabricAttachStatsDiscElemDeleted Counter32
  avFabricAttachStatsAsgnDeleted Counter32
  avFabricAttachStatsAsgnAuthFailed Counter32

AvFabricAttachZeroTouchClientEntry  
SEQUENCE    
  avFabricAttachZeroTouchClientType Integer32
  avFabricAttachZeroTouchClientDescr SnmpAdminString
  avFabricAttachZeroTouchClientOptionFlags BITS
  avFabricAttachZeroTouchClientRowStatus RowStatus
  avFabricAttachZeroTouchClientName SnmpAdminString
  avFabricAttachZeroTouchClientOrigin INTEGER

AvFabricAttachZeroTouchClientAttachEntry  
SEQUENCE    
  avFabricAttachZeroTouchClientAttachType Integer32
  avFabricAttachZeroTouchClientAttachVlan Integer32
  avFabricAttachZeroTouchClientAttachPortPriority Integer32
  avFabricAttachZeroTouchClientAttachIsid Integer32
  avFabricAttachZeroTouchClientAttachRowStatus RowStatus
  avFabricAttachZeroTouchClientAttachExcludeStatic INTEGER

AvFabricAttachZeroTouchClientDetectEntry  
SEQUENCE    
  avFabricAttachZeroTouchClientDetectType Integer32
  avFabricAttachZeroTouchClientDetectMethod INTEGER
  avFabricAttachZeroTouchClientDetectData OCTET STRING
  avFabricAttachZeroTouchClientDetectElementType Integer32
  avFabricAttachZeroTouchClientDetectLogicOper INTEGER
  avFabricAttachZeroTouchClientDetectRowStatus RowStatus

Defined Values

avayaFabricAttachMib 1.3.6.1.4.1.45.5.46
This MIB module contains objects related to the Fabric Attach support.
MODULE-IDENTITY    

avFabricAttachNotifications 1.3.6.1.4.1.45.5.46.0
OBJECT IDENTIFIER    

avFabricAttachObjects 1.3.6.1.4.1.45.5.46.1
OBJECT IDENTIFIER    

avFabricAttachNotifyObjects 1.3.6.1.4.1.45.5.46.2
OBJECT IDENTIFIER    

avFabricAttachService 1.3.6.1.4.1.45.5.46.1.1
Exports the status of the Fabric Attach service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

avFabricAttachElementType 1.3.6.1.4.1.45.5.46.1.2
Exports the Fabric Attach element type indicating the services supported by the system. May be read-only on platforms that only support a single element type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), faServer(2), faProxy(3), faServerNoAuth(4), faProxyNoAuth(5), faClientWapType1(6), faClientWapType2(7), faClientSwitch(8), faClientRouter(9), faClientIpPhone(10), faClientIpCamera(11), faClientIpVideo(12), faClientSecurityDev(13), faClientVirtSwitch(14), faClientSrvrEndpt(15), faClientOnaSdn(16), faClientOnaSpbOIp(17)  

avFabricAttachPrimaryServerId 1.3.6.1.4.1.45.5.46.1.3
Exports primary server ID data on a FA Proxy if a primary server has been selected. A zero length string indicates that a primary server does not currently exist.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

avFabricAttachPrimaryServerDescr 1.3.6.1.4.1.45.5.46.1.4
Exports a primary server description on a FA Proxy if a primary server has been selected.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..128)  

avFabricAttachIsidVlanAsgnsTable 1.3.6.1.4.1.45.5.46.1.5
This table contains the I-SID <--> VLAN assignments for the Fabric Attach application.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AvFabricAttachIsidVlanAsgnsEntry

avFabricAttachIsidVlanAsgnsEntry 1.3.6.1.4.1.45.5.46.1.5.1
Information about the I-SID <--> VLAN assignments for the Fabric Attach application.
Status: current Access: not-accessible
OBJECT-TYPE    
  AvFabricAttachIsidVlanAsgnsEntry  

avFabricAttachIsidVlanAsgnsIfIndex 1.3.6.1.4.1.45.5.46.1.5.1.1
Interface identifier component of the I-SID <-> VLAN assignment.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

avFabricAttachIsidVlanAsgnsIsid 1.3.6.1.4.1.45.5.46.1.5.1.2
I-SID component of the I-SID <-> VLAN assignment.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

avFabricAttachIsidVlanAsgnsVlan 1.3.6.1.4.1.45.5.46.1.5.1.3
VLAN ID component of the I-SID <-> VLAN assignment.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..4094  

avFabricAttachIsidVlanAsgnsState 1.3.6.1.4.1.45.5.46.1.5.1.4
The current state of the Fabric Attach I-SID <-> VLAN assignment.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), pending(2), active(3), rejected(4)  

avFabricAttachIsidVlanAsgnsRowStatus 1.3.6.1.4.1.45.5.46.1.5.1.5
This object allows entries to be created and deleted in the avFabricAttachIsidVlanAsgnsTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

avFabricAttachIsidVlanAsgnsOrigin 1.3.6.1.4.1.45.5.46.1.5.1.6
Origin information for the Fabric Attach I-SID <-> VLAN assignment.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), faProxy(2), faClient(3), faRadiusClient(4), faZeroTouchClient(5)  

avFabricAttachPortTable 1.3.6.1.4.1.45.5.46.1.6
This table contains port-specific data for the Fabric Attach application.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AvFabricAttachPortEntry

avFabricAttachPortEntry 1.3.6.1.4.1.45.5.46.1.6.1
Port-specific data related to the Fabric Attach application.
Status: current Access: not-accessible
OBJECT-TYPE    
  AvFabricAttachPortEntry  

avFabricAttachPortIfIndex 1.3.6.1.4.1.45.5.46.1.6.1.1
Port (ifIndex) identifier attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

avFabricAttachPortState 1.3.6.1.4.1.45.5.46.1.6.1.2
The current port state from a Fabric Attach perspective. Indicates whether FA TLVs will be included in LLDPDUs generated on the port (enabled) or not (disabled).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

avFabricAttachPortRowStatus 1.3.6.1.4.1.45.5.46.1.6.1.3
This object allows entries to be created, deleted and modified in the avFabricAttachPortTable, if the operation is supported by the agent.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

avFabricAttachPortMsgAuthStatus 1.3.6.1.4.1.45.5.46.1.6.1.4
Controls the current Fabric Attach message authentication status for the associated interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

avFabricAttachPortMsgAuthKey 1.3.6.1.4.1.45.5.46.1.6.1.5
Provides access to the Fabric Attach message authentication key for the associated interface. Can be used to establish a new key of length 1..32 octets. Always returns a zero-length string when queried.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

avFabricAttachPortMgmtIsid 1.3.6.1.4.1.45.5.46.1.6.1.6
Fabric Attach management i-sid for the associated interface. Zero means the management i-sid feature is not enabled
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..16777215  

avFabricAttachPortMgmtCvid 1.3.6.1.4.1.45.5.46.1.6.1.7
Fabric Attach management customer vid for the associated interface. Zero means the management i-sid feature is not enabled. 4096 means it is untagged
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4096  

avFabricAttachPortMsgAuthKeymode 1.3.6.1.4.1.45.5.46.1.6.1.8
Controls the current Fabric Attach message authentication key-mode for the associated interface. A value of 'strict(1)' indicates that authentication using only the user-defined authentication key should be performed. A value of 'standard(2)' indicates that authentication using the user-defined authentication key as well as the default authentication key should be performed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER strict(1), standard(2)  

avFabricAttachZeroTouchService 1.3.6.1.4.1.45.5.46.1.7
Controls the status of the Fabric Attach Zero Touch service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

avFabricAttachMsgAuthStatus 1.3.6.1.4.1.45.5.46.1.8
Controls the current Fabric Attach message authentication status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

avFabricAttachMsgAuthKey 1.3.6.1.4.1.45.5.46.1.9
Provides access to the Fabric Attach message authentication key. Can be used to establish a new key of length 1..32 octets. Always returns a zero-length string when queried.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

avFabricAttachClientProxyStatus 1.3.6.1.4.1.45.5.46.1.10
Controls the current Fabric Attach client proxy status. A FA Proxy provides proxy services to FA Clients only when client proxy support is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

avFabricAttachDiscElemsTable 1.3.6.1.4.1.45.5.46.1.11
This table contains details about locally connected Fabric Attach elements that have been discovered.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AvFabricAttachDiscElemsEntry

avFabricAttachDiscElemsEntry 1.3.6.1.4.1.45.5.46.1.11.1
Contains details about a locally connected Fabric Attach element.
Status: current Access: not-accessible
OBJECT-TYPE    
  AvFabricAttachDiscElemsEntry  

avFabricAttachDiscElemsIfIndex 1.3.6.1.4.1.45.5.46.1.11.1.1
Identifies the interface through which the Fabric Attach element represented by this entry was discovered.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

avFabricAttachDiscElemsElementType 1.3.6.1.4.1.45.5.46.1.11.1.2
Identifies the Fabric Attach element type as advertised through LLDP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), faServer(2), faProxy(3), faServerNoAuth(4), faProxyNoAuth(5), faClientWapType1(6), faClientWapType2(7), faClientSwitch(8), faClientRouter(9), faClientIpPhone(10), faClientIpCamera(11), faClientIpVideo(12), faClientSecurityDev(13), faClientVirtSwitch(14), faClientSrvrEndpt(15), faClientOnaSdn(16), faClientOnaSpbOIp(17)  

avFabricAttachDiscElemsElementVlan 1.3.6.1.4.1.45.5.46.1.11.1.3
Identifies the Fabric Attach element VLAN as advertised through LLDP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4095  

avFabricAttachDiscElemsElementId 1.3.6.1.4.1.45.5.46.1.11.1.4
Exports the Chassis ID associated with the discovered Fabric Attach element as advertised through LLDP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

avFabricAttachDiscElemsElementState 1.3.6.1.4.1.45.5.46.1.11.1.5
Exports the state flag data associated with the discovered Fabric Attach element as advertised through LLDP.
Status: current Access: read-only
OBJECT-TYPE    
  BITS trafficTagged(0), trafficTaggedAndUntagged(1), provisionModeDisabled(2), provisionModeSpbm(3), provisionModeVlan(4)  

avFabricAttachDiscElemsElementAuth 1.3.6.1.4.1.45.5.46.1.11.1.6
Discovered element authentication status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER authenticationPass(1), authenticationFail(2), notAuthenticated(3), none(4)  

avFabricAttachDiscElemsElementTrunkId 1.3.6.1.4.1.45.5.46.1.11.1.7
Identifies the trunk ID through which the Fabric Attach element represented by this entry was discovered.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

avFabricAttachDiscElemsElementOperAuthStatus 1.3.6.1.4.1.45.5.46.1.11.1.8
the current operational Fabric Attach elements authentication status for the associated interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), successNoAuth(2), successAuth(3), failMismatchedKeys(4), failLocalAuthRemoteNoAuth(5), failLocalNoAuthRemoteAuth(6)  

avFabricAttachDiscElemsElementAsgnsOperAuthStatus 1.3.6.1.4.1.45.5.46.1.11.1.9
the current operational Fabric Attach assignment authentication status for the associated interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), successNoAuth(2), successAuth(3), failMismatchedKeys(4), failLocalAuthRemoteNoAuth(5), failLocalNoAuthRemoteAuth(6)  

avFabricAttachDiscElemsAsgnsAuth 1.3.6.1.4.1.45.5.46.1.11.1.10
The assignment authentication status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER authenticationPass(1), authenticationFail(2), notAuthenticated(3), none(4)  

avFabricAttachAutoProvision 1.3.6.1.4.1.45.5.46.1.12
Exports the Fabric Attach Auto Provision setting indicating the services supported by the system. May be read-only on platforms that don't support this functionality.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), faServer(2), faProxy(3)  

avFabricAttachProvisionMode 1.3.6.1.4.1.45.5.46.1.13
Exports the Fabric Attach provision mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), spbm(2), vlan(3)  

avFabricAttachZeroTouchOptionFlags 1.3.6.1.4.1.45.5.46.1.14
Exports the Zero Touch option data.
Status: current Access: read-write
OBJECT-TYPE    
  BITS ipAddrDhcp(0), autoPortModeFaClient(1), autoPortModeMhmv(2), radiusServer(3), nsv(4), autoTrustedModeFaClient(5), autoPvidModeFaClient(6), autoClientAttach(7)  

avFabricAttachZeroTouchNsvTable 1.3.6.1.4.1.45.5.46.1.15
This table contains the Zero Touch NSV specifications for the Fabric Attach application.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AvFabricAttachZeroTouchNsvEntry

avFabricAttachZeroTouchNsvEntry 1.3.6.1.4.1.45.5.46.1.15.1
Information about the Zero Touch NSV specifications for the Fabric Attach application.
Status: current Access: not-accessible
OBJECT-TYPE    
  AvFabricAttachZeroTouchNsvEntry  

avFabricAttachZeroTouchNsvType 1.3.6.1.4.1.45.5.46.1.15.1.1
Element type identifier component of the NSV specification.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..63  

avFabricAttachZeroTouchNsvVlan 1.3.6.1.4.1.45.5.46.1.15.1.2
VLAN ID component of the NSV specification.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

avFabricAttachZeroTouchNsvPortPriority 1.3.6.1.4.1.45.5.46.1.15.1.3
Port priority component of the NSV specification.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7  

avFabricAttachZeroTouchNsvStateFlags 1.3.6.1.4.1.45.5.46.1.15.1.4
State flags associated with the NSV specification.
Status: current Access: read-create
OBJECT-TYPE    
  BITS updatePvid(0), updatePortPriority(1)  

avFabricAttachZeroTouchNsvRowStatus 1.3.6.1.4.1.45.5.46.1.15.1.5
This object allows entries to be created and deleted in the avFabricAttachZeroTouchNsvTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

avFabricAttachZeroTouchNsvIsid 1.3.6.1.4.1.45.5.46.1.15.1.6
I-SID component of the NSV specification. A value of 0 indicates that an I-SID has not been specified.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..16777214  

avFabricAttachZeroTouchRadiusPriSrvrIpv4Addr 1.3.6.1.4.1.45.5.46.1.16
This object represents the Zero Touch RADIUS primary server IPv4 address information currently maintained by the FA agent.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

avFabricAttachZeroTouchRadiusSecSrvrIpv4Addr 1.3.6.1.4.1.45.5.46.1.17
This object represents the Zero Touch RADIUS secondary server IPv4 address information currently maintained by the FA agent.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

avFabricAttachZeroTouchRadiusTimeout 1.3.6.1.4.1.45.5.46.1.18
This object represents the Zero Touch RADIUS timeout information currently maintained by the FA agent.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..60  

avFabricAttachStandaloneProxy 1.3.6.1.4.1.45.5.46.1.19
Controls the standalone FA Proxy mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

avFabricAttachStaticUplinkIfIndex 1.3.6.1.4.1.45.5.46.1.20
Static uplink (ifIndex) identifier attribute.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

avFabricAttachStaticUplinkTrunk 1.3.6.1.4.1.45.5.46.1.21
Static uplink (trunk ID) identifier attribute.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1023  

avFabricAttachAsgnTimeout 1.3.6.1.4.1.45.5.46.1.22
Exports the Fabric Attach assignment timeout.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..480  

avFabricAttachStatsTable 1.3.6.1.4.1.45.5.46.1.23
This table contains Fabric Attach port statistics data.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AvFabricAttachStatsEntry

avFabricAttachStatsEntry 1.3.6.1.4.1.45.5.46.1.23.1
Each entry contains Fabric Attach operational statistics for a specific device port. Ports are identified by their MIB II ifIndex value.
Status: current Access: not-accessible
OBJECT-TYPE    
  AvFabricAttachStatsEntry  

avFabricAttachStatsPortIndex 1.3.6.1.4.1.45.5.46.1.23.1.1
An index value that uniquely identifies a port. This value corresponds to a MIB II ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

avFabricAttachStatsDiscElemReceived 1.3.6.1.4.1.45.5.46.1.23.1.2
Indicates the number of FA Element TLVs received on the identified port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachStatsAsgnReceived 1.3.6.1.4.1.45.5.46.1.23.1.3
Indicates the number of I-SID/VLAN bindings received in FA I-SID/VLAN Assignment TLVs on the identified port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachStatsAsgnAccepted 1.3.6.1.4.1.45.5.46.1.23.1.4
Indicates the number of I-SID/VLAN bindings from received FA I-SID/VLAN Assignment TLVs that are accepted (activated) on the identified port. Counter is incremented when the binding transitions from a non-accepted state (e.g., 'pending', 'rejected') to the accepted state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachStatsAsgnRejected 1.3.6.1.4.1.45.5.46.1.23.1.5
Indicates the number of I-SID/VLAN bindings from received FA I-SID/VLAN Assignment TLVs that are rejected on the identified port. Counter is incremented when the binding transitions from a non-rejected state (e.g., 'pending', 'accepted') to the rejected state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachStatsAsgnExpired 1.3.6.1.4.1.45.5.46.1.23.1.6
Indicates the number of I-SID/VLAN bindings from received FA I-SID/VLAN Assignment TLVs that have expired on the identified port. Counter is not incremented when bindings are deleted for reasons other than expiration.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachStatsDiscAuthFailed 1.3.6.1.4.1.45.5.46.1.23.1.7
Indicates the number of received FA Element TLVs for which authentication was attempted and failed on the identified port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachStatsDiscElemExpired 1.3.6.1.4.1.45.5.46.1.23.1.8
Indicates the number of discovered FA elements from received FA Element TLVs that have expired on the identified port. Counter is not incremented when elements are deleted for reasons other than expiration.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachStatsDiscElemDeleted 1.3.6.1.4.1.45.5.46.1.23.1.9
Indicates the number of discovered FA elements from received FA Element TLVs that have been deleted on the identified port. Counter is only incremented when elements are deleted for reasons other than expiration.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachStatsAsgnDeleted 1.3.6.1.4.1.45.5.46.1.23.1.10
Indicates the number of I-SID/VLAN bindings from received FA I-SID/VLAN Assignment TLVs that have been deleted on the identified port. Counter is only incremented when bindings are deleted for reasons other than expiration.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachStatsAsgnAuthFailed 1.3.6.1.4.1.45.5.46.1.23.1.11
Indicates the number of received FA I-SID/VLAN Assignment TLVs for which authentication was attempted and failed on the identified port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachGlobalStats 1.3.6.1.4.1.45.5.46.1.24
OBJECT IDENTIFIER    

avFabricAttachGlobalStatsDiscElemReceived 1.3.6.1.4.1.45.5.46.1.24.1
Indicates the number of FA Element TLVs received on all device ports since the most recent epoch (e.g., device reset, global statistics reset).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachGlobalStatsAsgnReceived 1.3.6.1.4.1.45.5.46.1.24.2
Indicates the number of I-SID/VLAN bindings received in FA I-SID/VLAN Assignment TLVs on all device ports since the most recent epoch (e.g., device reset, global statistics reset).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachGlobalStatsAsgnAccepted 1.3.6.1.4.1.45.5.46.1.24.3
Indicates the number of I-SID/VLAN bindings from received FA I-SID/VLAN Assignment TLVs that are accepted (activated) on all device ports since the most recent epoch (e.g., device reset, global statistics reset). Counter is incremented when the binding transitions from a non-accepted state (e.g., 'pending', 'rejected') to the accepted state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachGlobalStatsAsgnRejected 1.3.6.1.4.1.45.5.46.1.24.4
Indicates the number of I-SID/VLAN bindings from received FA I-SID/VLAN Assignment TLVs that are rejected on all device ports since the most recent epoch (e.g., device reset, global statistics reset). Counter is incremented when the binding transitions from a non-rejected state (e.g., 'pending', 'accepted') to the rejected state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachGlobalStatsAsgnExpired 1.3.6.1.4.1.45.5.46.1.24.5
Indicates the number of I-SID/VLAN bindings from received FA I-SID/VLAN Assignment TLVs that have expired on all device ports since the most recent epoch (e.g., device reset, global statistics reset). Counter is not incremented when bindings are deleted for reasons other than expiration.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachGlobalStatsDiscAuthFailed 1.3.6.1.4.1.45.5.46.1.24.6
Indicates the number of received FA Element TLVs for which authentication was attempted and failed on all device ports since the most recent epoch (e.g., device reset, global statistics reset).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachGlobalStatsDiscElemExpired 1.3.6.1.4.1.45.5.46.1.24.7
Indicates the number of discovered FA elements from received FA Element TLVs that have been deleted on all device ports since the most recent epoch (e.g., device reset, global statistics reset). Counter is only incremented when elements are deleted for reasons other than expiration.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachGlobalStatsDiscElemDeleted 1.3.6.1.4.1.45.5.46.1.24.8
Indicates the number of discovered FA elements from received FA Element TLVs that have been deleted on all device ports since the most recent epoch (e.g., device reset, global statistics reset). Counter is only incremented when elements are deleted for reasons other than expiration.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachGlobalStatsAsgnDeleted 1.3.6.1.4.1.45.5.46.1.24.9
Indicates the number of I-SID/VLAN bindings from received FA I-SID/VLAN Assignment TLVs that have been deleted on all device ports since the most recent epoch (e.g., device reset, global statistics reset). Counter is only incremented when bindings are deleted for reasons other than expiration.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachGlobalStatsAsgnAuthFailed 1.3.6.1.4.1.45.5.46.1.24.10
Indicates the number of received FA I-SID/VLAN Assignment TLVs for which authentication was attempted and failed on all device ports since the most recent epoch (e.g., device reset, global statistics reset).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachGlobalStatsCurReceivedBindings 1.3.6.1.4.1.45.5.46.1.24.11
Indicates the number of received FA I-SID/VLAN bindings currently maintained in the database.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachGlobalStatsCurAdvertisedBindings 1.3.6.1.4.1.45.5.46.1.24.12
Indicates the number of FA I-SID/VLAN bindings that are currently being advertised (service requests).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

avFabricAttachExtendedLogging 1.3.6.1.4.1.45.5.46.1.25
Controls the Fabric Attach extended logging capabilities.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

avFabricAttachDiscTimeout 1.3.6.1.4.1.45.5.46.1.26
Exports the Fabric Attach discovery timeout.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..480  

avFabricAttachZeroTouchClientTable 1.3.6.1.4.1.45.5.46.1.27
This table contains the Zero Touch Client specifications for the Fabric Attach application.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AvFabricAttachZeroTouchClientEntry

avFabricAttachZeroTouchClientEntry 1.3.6.1.4.1.45.5.46.1.27.1
Information about the Zero Touch Client specifications for the Fabric Attach application.
Status: current Access: not-accessible
OBJECT-TYPE    
  AvFabricAttachZeroTouchClientEntry  

avFabricAttachZeroTouchClientType 1.3.6.1.4.1.45.5.46.1.27.1.1
FA Element type identifier component of the Client specification.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

avFabricAttachZeroTouchClientDescr 1.3.6.1.4.1.45.5.46.1.27.1.2
Client description for the Client specification.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..80)  

avFabricAttachZeroTouchClientOptionFlags 1.3.6.1.4.1.45.5.46.1.27.1.3
Zero Touch options associated with the Client specification. Supported values are synchronized with the Zero Touch options available through the avFabricAttachZeroTouchOptionFlags attribute.
Status: current Access: read-create
OBJECT-TYPE    
  BITS ipAddrDhcp(0), autoPortModeFaClient(1), autoPortModeMhmv(2), radiusServer(3), nsv(4), autoTrustedModeFaClient(5), autoPvidModeFaClient(6), autoClientAttach(7)  

avFabricAttachZeroTouchClientRowStatus 1.3.6.1.4.1.45.5.46.1.27.1.4
This object allows entries to be created, deleted and modified in the avFabricAttachZeroTouchClientTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

avFabricAttachZeroTouchClientName 1.3.6.1.4.1.45.5.46.1.27.1.5
Client name for the Client specification.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

avFabricAttachZeroTouchClientOrigin 1.3.6.1.4.1.45.5.46.1.27.1.6
Client origin information. Clients may be well-known ('standard(1)') devices that utilize FA signaling. If supported, clients may also be user-defined ('custom(2)') devices that are typically identified by means other than FA signaling. Standard clients are pre-populated in the table and support limited modifications.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER standard(1), custom(2)  

avFabricAttachStats 1.3.6.1.4.1.45.5.46.1.28
OBJECT IDENTIFIER    

avFabricAttachStatsClearErrorCounters 1.3.6.1.4.1.45.5.46.1.28.1
Clears Fabric Attach statistic and error counters on all device interfaces. Setting this attribute to 'true(1)' clears all counters. The value 'false(2)' is returned when the attribute is queried.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

avFabricAttachStatsClearGlobalErrorCounters 1.3.6.1.4.1.45.5.46.1.28.2
Clears Fabric Attach statistic and error global (summary) counters. Setting this attribute to 'true(1)' clears all summary counters. The value 'false(2)' is returned when the attribute is queried.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

avFabricAttachStatsClearPortErrorCounters 1.3.6.1.4.1.45.5.46.1.28.3
Clears Fabric Attach statistic and error counters for a specific interface. Setting this attribute to an ifIndex value identifying a device interface clears the counters associated with the interface. The value 0 is returned when the attribute is queried.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

avFabricAttachZeroTouchClientAttachTable 1.3.6.1.4.1.45.5.46.1.29
This table contains the Zero Touch Client auto-attach specifications for the Fabric Attach application.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AvFabricAttachZeroTouchClientAttachEntry

avFabricAttachZeroTouchClientAttachEntry 1.3.6.1.4.1.45.5.46.1.29.1
Information about the Zero Touch Client auto-attach specifications for the Fabric Attach application.
Status: current Access: not-accessible
OBJECT-TYPE    
  AvFabricAttachZeroTouchClientAttachEntry  

avFabricAttachZeroTouchClientAttachType 1.3.6.1.4.1.45.5.46.1.29.1.1
Element type identifier component of the Zero Touch Client auto-attach specification.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

avFabricAttachZeroTouchClientAttachVlan 1.3.6.1.4.1.45.5.46.1.29.1.2
VLAN ID component of the Zero Touch Client auto-attach specification. A value of 4096 indicates that a VLAN has not been specified (e.g., an untagged traffic environment).
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4096  

avFabricAttachZeroTouchClientAttachPortPriority 1.3.6.1.4.1.45.5.46.1.29.1.3
Port priority component of the Zero Touch Client auto-attach specification. A value of 8 indicates that a port priority has not been specified.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..8  

avFabricAttachZeroTouchClientAttachIsid 1.3.6.1.4.1.45.5.46.1.29.1.4
I-SID component of the Zero Touch Client auto-attach specification. A value of 0 indicates that an I-SID has not been specified.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..16777214  

avFabricAttachZeroTouchClientAttachRowStatus 1.3.6.1.4.1.45.5.46.1.29.1.5
This object allows entries to be created and deleted in the avFabricAttachZeroTouchClientAttachTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

avFabricAttachZeroTouchClientAttachExcludeStatic 1.3.6.1.4.1.45.5.46.1.29.1.6
Indicates if static VLANs associated with the client interface should be removed while the client is connected to the device.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER keepStaticVlans(1), removeStaticVlans(2)  

avFabricAttachZeroTouchClientDetectTable 1.3.6.1.4.1.45.5.46.1.30
This table contains the Zero Touch Client detection specifications for the Fabric Attach application.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AvFabricAttachZeroTouchClientDetectEntry

avFabricAttachZeroTouchClientDetectEntry 1.3.6.1.4.1.45.5.46.1.30.1
Information about the Zero Touch Client detection specifications for the Fabric Attach application.
Status: current Access: not-accessible
OBJECT-TYPE    
  AvFabricAttachZeroTouchClientDetectEntry  

avFabricAttachZeroTouchClientDetectType 1.3.6.1.4.1.45.5.46.1.30.1.1
Element type identifier component of the Zero Touch Client detection specification.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

avFabricAttachZeroTouchClientDetectMethod 1.3.6.1.4.1.45.5.46.1.30.1.2
Specifies the detection method used to identify custom Zero Touch Clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER lldpChassisIdMac(1), lldpChassisIdString(2), lldpSystemDescrString(3), lldpMgmtAddrIPv4(4)  

avFabricAttachZeroTouchClientDetectData 1.3.6.1.4.1.45.5.46.1.30.1.3
Specifies the data that is used to identify custom Zero Touch Clients. Data application depends on the associated detection method.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

avFabricAttachZeroTouchClientDetectElementType 1.3.6.1.4.1.45.5.46.1.30.1.4
Identifies a standard FA element type that can be used together with the associated detection method/data to identify custom clients. A value equal to 0 indicates that the element type check is not required.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..63  

avFabricAttachZeroTouchClientDetectLogicOper 1.3.6.1.4.1.45.5.46.1.30.1.5
Specifies the logic operation used to identify custom Zero Touch Clients when multiple detection methods and data sets are defined for the same custom client type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER and(1), or(2)  

avFabricAttachZeroTouchClientDetectRowStatus 1.3.6.1.4.1.45.5.46.1.30.1.6
This object allows entries to be created and deleted in the avFabricAttachZeroTouchClientDetectTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

avFabricAttachDiscElemsSysDescr 1.3.6.1.4.1.45.5.46.2.1
The string value used to identify the system description of the remote system distributed through LLDP.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

avFabricAttachDiscElemsMgmtOid 1.3.6.1.4.1.45.5.46.2.2
The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent distributed through LLDP.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OBJECT IDENTIFIER  

avFabricAttachDiscoveredElement 1.3.6.1.4.1.45.5.46.0.1
This notification is generated when a FA element is discovered.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

avFabricAttachExpiredElement 1.3.6.1.4.1.45.5.46.0.2
This notification is generated when a FA element expires.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE