AVAYA-ENTITY-MIB

File: AVAYA-ENTITY-MIB.mib (30018 bytes)

Imported modules

SNMPv2-SMI RFC1213-MIB SNMPv2-CONF
SNMPv2-TC ENTITY-MIB ENTITY-SENSOR-MIB
AVAYAGEN-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Unsigned32 mib-2
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
TEXTUAL-CONVENTION TimeStamp entPhysicalIndex
PhysicalIndex DisplayString entPhysicalDescr
entPhysicalParentRelPos EntitySensorValue entPhySensorValue
lsg

Defined Types

AvEntPhyItuPerceivedSeverity  
ITU perceived severity values
TEXTUAL-CONVENTION    
  INTEGER cleared(1), indeterminate(2), critical(3), major(4), minor(5), warning(6)  

AvEntPhySensorEntry  
SEQUENCE    
  avEntPhySensorHiShutdown EntitySensorValue
  avEntPhySensorHiWarning EntitySensorValue
  avEntPhySensorHiWarningClear EntitySensorValue
  avEntPhySensorLoWarningClear EntitySensorValue
  avEntPhySensorLoWarning EntitySensorValue
  avEntPhySensorLoShutdown EntitySensorValue
  avEntPhySensorEventSupportMask OCTET STRING

AvEntPhyUSBDevicesEntry  
SEQUENCE    
  avEntPhyUSBDeviceUSBSupportVersion DisplayString
  avEntPhyUSBDeviceClassCode Integer32
  avEntPhyUSBDeviceSubClassCode Integer32
  avEntPhyUSBDeviceProtocol Integer32
  avEntPhyUSBDeviceVendorId OCTET STRING
  avEntPhyUSBDeviceSpeed DisplayString
  avEntPhyUSBDevicePower DisplayString
  avEntPhyUSBDeviceCurrent Integer32

AvEntPhyUSBMassStorageDevicesEntry  
SEQUENCE    
  avEntPhyUSBMassStorageDeviceFileSystemName DisplayString
  avEntPhyUSBMassStorageDeviceCapacity Integer32
  avEntPhyUSBMassStorageDeviceFreeMemory Integer32
  avEntPhyUSBMassStorageDeviceFs DisplayString

AvEntPhyChFruEntry  
SEQUENCE    
  avEntPhyChFruOperStat INTEGER
  avEntPhyChFruFault INTEGER

Defined Values

avayaEntity 1.3.6.1.4.1.6889.2.1.99
This module defines private extensions for Entity MIB
MODULE-IDENTITY    

avEntPhySensorTable 1.3.6.1.4.1.6889.2.1.99.1
This table extends entPhySensorTable with thresholds on the sensors.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AvEntPhySensorEntry

avEntPhySensorEntry 1.3.6.1.4.1.6889.2.1.99.1.1
Thresholds for sensors described in entPhySensorTable. The Threshold values correspond to entPhySensorValue. Entries are created in this table by the agent. An entry for each physical sensor SHOULD be created at the same time as the associated entPhysicalEntry. An entry SHOULD be destroyed if the associated entPhysicalEntry is destroyed. No entry means that no thresholds are defined for the corresponding sensor
Status: current Access: not-accessible
OBJECT-TYPE    
  AvEntPhySensorEntry  

avEntPhySensorHiShutdown 1.3.6.1.4.1.6889.2.1.99.1.1.1
The system shuts down when the sensor reading reaches this value
Status: current Access: read-only
OBJECT-TYPE    
  EntitySensorValue  

avEntPhySensorHiWarning 1.3.6.1.4.1.6889.2.1.99.1.1.2
The system generates a warning event when the sensor reading rises and crosses this value
Status: current Access: read-only
OBJECT-TYPE    
  EntitySensorValue  

avEntPhySensorHiWarningClear 1.3.6.1.4.1.6889.2.1.99.1.1.3
The system generates a warning-clear event when the sensor reading falls and crosses below this value
Status: current Access: read-only
OBJECT-TYPE    
  EntitySensorValue  

avEntPhySensorLoWarningClear 1.3.6.1.4.1.6889.2.1.99.1.1.4
The system generates a warning-clear event when the sensor reading rises and crosses this value
Status: current Access: read-only
OBJECT-TYPE    
  EntitySensorValue  

avEntPhySensorLoWarning 1.3.6.1.4.1.6889.2.1.99.1.1.5
The system generates a warning event when the sensor reading falls and crosses this value
Status: current Access: read-only
OBJECT-TYPE    
  EntitySensorValue  

avEntPhySensorLoShutdown 1.3.6.1.4.1.6889.2.1.99.1.1.6
The system shuts down if the sensor reaches this value
Status: current Access: read-only
OBJECT-TYPE    
  EntitySensorValue  

avEntPhySensorEventSupportMask 1.3.6.1.4.1.6889.2.1.99.1.1.7
A trap and an event is generated upon threshold crossing if the correspond bit is set. Note that there may be other trap filtering mechanisms. 0/0: hiShutdown(0) 0/1: hiWarning(1) 0/2: hiWarningClear(2) 0/3: loWarningClear(3) 0/4: loWarning(4) 0/5: loShowdown(5)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

avEntTraps 1.3.6.1.4.1.6889.2.1.99.2
OBJECT IDENTIFIER    

avEntTrapsV3separator 1.3.6.1.4.1.6889.2.1.99.2.0
OBJECT IDENTIFIER    

avEntFanFlt 1.3.6.1.4.1.6889.2.1.99.2.0.1
Fan Fault
Status: current Access: read-only
NOTIFICATION-TYPE    

avEntFanOk 1.3.6.1.4.1.6889.2.1.99.2.0.2
Fan Fault
Status: current Access: read-only
NOTIFICATION-TYPE    

avEnt48vPwrFlt 1.3.6.1.4.1.6889.2.1.99.2.0.4
48V power supply fault
Status: current Access: read-only
NOTIFICATION-TYPE    

avEnt48vPwrFltOk 1.3.6.1.4.1.6889.2.1.99.2.0.5
48V power supply fault clear
Status: current Access: read-only
NOTIFICATION-TYPE    

avEnt5vPwrFlt 1.3.6.1.4.1.6889.2.1.99.2.0.7
5V power supply fault
Status: current Access: read-only
NOTIFICATION-TYPE    

avEnt5vPwrFltOk 1.3.6.1.4.1.6889.2.1.99.2.0.8
5V power supply fault clear
Status: current Access: read-only
NOTIFICATION-TYPE    

avEnt3300mvPwrFlt 1.3.6.1.4.1.6889.2.1.99.2.0.10
3.3V (3300mv) power supply fault
Status: current Access: read-only
NOTIFICATION-TYPE    

avEnt3300mvPwrFltOk 1.3.6.1.4.1.6889.2.1.99.2.0.11
3.3V (3300mv) power supply fault clear
Status: current Access: read-only
NOTIFICATION-TYPE    

avEnt2500mvPwrFlt 1.3.6.1.4.1.6889.2.1.99.2.0.13
2.5V (2500mv) power supply fault
Status: current Access: read-only
NOTIFICATION-TYPE    

avEnt2500mvPwrFltOk 1.3.6.1.4.1.6889.2.1.99.2.0.14
2.5V (2500mv) power supply fault clear
Status: current Access: read-only
NOTIFICATION-TYPE    

avEnt1800mvPwrFlt 1.3.6.1.4.1.6889.2.1.99.2.0.16
1.8V (1800mv) power supply fault
Status: current Access: read-only
NOTIFICATION-TYPE    

avEnt1800mvPwrFltOk 1.3.6.1.4.1.6889.2.1.99.2.0.17
1.8V (1800mv) power supply fault clear
Status: current Access: read-only
NOTIFICATION-TYPE    

avEnt1600mvPwrFlt 1.3.6.1.4.1.6889.2.1.99.2.0.19
1.6V (1600mv) power supply fault
Status: current Access: read-only
NOTIFICATION-TYPE    

avEnt1600mvPwrFltOk 1.3.6.1.4.1.6889.2.1.99.2.0.20
1.6V (1600mv) power supply fault clear
Status: current Access: read-only
NOTIFICATION-TYPE    

avEntAmbientHiTempFlt 1.3.6.1.4.1.6889.2.1.99.2.0.22
Ambient High Temprature fault
Status: current Access: read-only
NOTIFICATION-TYPE    

avEntAmbientHiTempFltOk 1.3.6.1.4.1.6889.2.1.99.2.0.23
Ambient High Temprature clear
Status: current Access: read-only
NOTIFICATION-TYPE    

avEntAmbientLoTempFlt 1.3.6.1.4.1.6889.2.1.99.2.0.24
Ambient Low Temprature fault
Status: current Access: read-only
NOTIFICATION-TYPE    

avEntAmbientLoTempFltOk 1.3.6.1.4.1.6889.2.1.99.2.0.25
Ambient High Temprature clear
Status: current Access: read-only
NOTIFICATION-TYPE    

avEntPhyUSBDevices 1.3.6.1.4.1.6889.2.1.99.3
OBJECT IDENTIFIER    

avEntPhyUSBDevicesTraps 1.3.6.1.4.1.6889.2.1.99.3.0
OBJECT IDENTIFIER    

avEntPhyUSBDeviceRemovalOnBackupRestoreOperation 1.3.6.1.4.1.6889.2.1.99.3.0.1
The notification is based on usb mass storage device removal during backup/restore operation to it. If other usb devices are removed during this operation then no harm/syslog.
Status: current Access: read-only
NOTIFICATION-TYPE    

avEntPhyUSBDeviceInsecureRemoval 1.3.6.1.4.1.6889.2.1.99.3.0.2
The notification is based on usb device insecurely removal.
Status: current Access: read-only
NOTIFICATION-TYPE    

avEntPhyUSBDevicePowerFailure 1.3.6.1.4.1.6889.2.1.99.3.0.3
The notification is based on usb device lack of power. For cases as: a. Connecting device which requires more power then gateway can supply. b. Connecting USB device to non power hub which has not enough power. C. Disconnecting power from the USB HUB and there is not enough power to drive the usb devices. D. Disconnecting power from a usb device which requires external power. E. Disconnecting power from USB device and the gateway/USB Hub can not supply power to it.
Status: current Access: read-only
NOTIFICATION-TYPE    

avEntPhyUSBDeviceNotSupported 1.3.6.1.4.1.6889.2.1.99.3.0.4
The notification is based on attaching non supported usb device to the gateway. The Gateways supports usb mass storage devices based on flash drives that their sub class is SCSI and their protocol is Bulk Only Transport. The Gateways supports usb modems that complies to sub class SFF-8020i, MMC-2 (ATAPI) and protocol Control/Bulk/Interrupt protocol (with no command completion Interrupt).
Status: current Access: read-only
NOTIFICATION-TYPE    

avEntPhyUSBDeviceExceedMaxNumber 1.3.6.1.4.1.6889.2.1.99.3.0.5
The notification is based on reaching the max number of usb devices connected to the gateway. G250/G350 allows only USB Modem with only one usb mass storage device at the same time.
Status: current Access: read-only
NOTIFICATION-TYPE    

avEntPhyUSBFileSystemNotSupported 1.3.6.1.4.1.6889.2.1.99.3.0.6
The notification is based on reaching connecting USB mass storage device with file system that is not supported.
Status: current Access: read-only
NOTIFICATION-TYPE    

avEntPhyUSBDevicesTable 1.3.6.1.4.1.6889.2.1.99.3.1
This table extends entPhysicalTable with USB devices parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AvEntPhyUSBDevicesEntry

avEntPhyUSBDevicesEntry 1.3.6.1.4.1.6889.2.1.99.3.1.1
This table includes extension to entPhysicalTable with usb devices parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  AvEntPhyUSBDevicesEntry  

avEntPhyUSBDeviceUSBSupportVersion 1.3.6.1.4.1.6889.2.1.99.3.1.1.1
The USB standard version. Possible values are: 1.1 and 2.0.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

avEntPhyUSBDeviceClassCode 1.3.6.1.4.1.6889.2.1.99.3.1.1.2
The usb device class code. Value Hex Value Descriptor 1 1 Audio 2 2 CDC-Control 3 3 HID 5 5 Physical 6 6 Image (subclass & protocol must be 1) 7 7 Printer 8 8 Mass-Storage 9 9 HUB 10 A CDC-Data 11 B Chip/Smart Card 13 D Content-Security 14 E Video 220 DC Diagnostic Device (see below for details) 224 E0 Wireless Controller (see below for details) 254 FE Application-Specific (see below for details) 255 FF Vendor-Specific The G250/G350 supports usb mass storage devices of class code of 0x8 and usb modem with class 0x2.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

avEntPhyUSBDeviceSubClassCode 1.3.6.1.4.1.6889.2.1.99.3.1.1.3
The usb device subclass code. USB standard describe the following class codes: 0x01 - RBC (Reduced Block Commands) 0x02 - SFF-8020i, MMC-2 (ATAPI) 0x03 - QIC-157 0x04 - UFI 0x05 - SFF-8070i 0x06 - SCSI The G250/G350 supports 0x06 - SCSI for USB mass storage devices and 0x2 - SFF-8020i, MMC-2 (ATAPI) for USB modem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

avEntPhyUSBDeviceProtocol 1.3.6.1.4.1.6889.2.1.99.3.1.1.4
The usb device protocol code. 0x0 - Control/Bulk/Interrupt protocol (with command completion Interrupt). 0x1 - Control/Bulk/Interrupt protocol (with no command completion Interrupt). 0x50 - Bulk Only Transport. The G250/G350 supports 0x50 protocol for usb mass storage devices and 0x1 for USB modem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

avEntPhyUSBDeviceVendorId 1.3.6.1.4.1.6889.2.1.99.3.1.1.5
The USB device vendor HEX-formatted string as it is provided to the USB host by the USB device
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

avEntPhyUSBDeviceSpeed 1.3.6.1.4.1.6889.2.1.99.3.1.1.6
The USB device speed. Possible values: 'Low', 'Full' and 'High'. G250/G350 supports 'Full' and 'High'
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

avEntPhyUSBDevicePower 1.3.6.1.4.1.6889.2.1.99.3.1.1.7
The USB device power. Possible values: 'Unknown', 'Self Powered' and 'Bus Powered'.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

avEntPhyUSBDeviceCurrent 1.3.6.1.4.1.6889.2.1.99.3.1.1.8
The USB current consumption in mA.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

avEntPhyUSBMassStorageDevicesTable 1.3.6.1.4.1.6889.2.1.99.3.2
This table extends entPhysicalTable with USB mass storage devices parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AvEntPhyUSBMassStorageDevicesEntry

avEntPhyUSBMassStorageDevicesEntry 1.3.6.1.4.1.6889.2.1.99.3.2.1
This table includes extension to entPhysicalTable with usb mass storage devices parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  AvEntPhyUSBMassStorageDevicesEntry  

avEntPhyUSBMassStorageDeviceFileSystemName 1.3.6.1.4.1.6889.2.1.99.3.2.1.1
The usb mass storage device File system name. An exmaple for one usb mass storage device on the gateway is mapped to /usbdevice0/.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

avEntPhyUSBMassStorageDeviceCapacity 1.3.6.1.4.1.6889.2.1.99.3.2.1.2
Capacity of USB Mass storage device in KBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

avEntPhyUSBMassStorageDeviceFreeMemory 1.3.6.1.4.1.6889.2.1.99.3.2.1.3
Free memory of USB Mass storage device in KB. For R/O USB mass storage devices (as CDROM) this value returns 0. Note that this MIB item shall be updated according backup operations that may consume memory space.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

avEntPhyUSBMassStorageDeviceFs 1.3.6.1.4.1.6889.2.1.99.3.2.1.4
The file system supported by the USB device. Possible values: 'FAT16' and 'FAT32'.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

avEntPhyNotificationDefinitions 1.3.6.1.4.1.6889.2.1.99.4
OBJECT IDENTIFIER    

avEntPhySeverity 1.3.6.1.4.1.6889.2.1.99.4.1
The severity of the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AvEntPhyItuPerceivedSeverity  

avEntPhyProductId 1.3.6.1.4.1.6889.2.1.99.4.2
The Product Id of Avaya Device - 10 characters.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString Size(0..10)  

avEntPhysicalIndex 1.3.6.1.4.1.6889.2.1.99.4.3
The index for this entry.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  PhysicalIndex  

avEntPhyChFru 1.3.6.1.4.1.6889.2.1.99.5
OBJECT IDENTIFIER    

avEntPhyChFruNotifications 1.3.6.1.4.1.6889.2.1.99.5.0
OBJECT IDENTIFIER    

avEntPhyChFruRemoval 1.3.6.1.4.1.6889.2.1.99.5.0.1
FRU unit was removed from chassis
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

avEntPhyChFruInsertion 1.3.6.1.4.1.6889.2.1.99.5.0.2
FRU unit was inserted into chassis
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

avEntPhyChFruPsuFlt 1.3.6.1.4.1.6889.2.1.99.5.0.3
Power Supply unit failed
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

avEntPhyChFruPsuFltOk 1.3.6.1.4.1.6889.2.1.99.5.0.4
Power Supply unit resumed operation
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

avEntPhyChFruExpansionTestFailure 1.3.6.1.4.1.6889.2.1.99.5.0.5
Cable Test Failure on Expansion module
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

avEntPhyChFruExpansionTestClear 1.3.6.1.4.1.6889.2.1.99.5.0.6
Cable Test Passed OK on Expansion module
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

avEntPhyChFruTable 1.3.6.1.4.1.6889.2.1.99.5.1
Table depicting the status of chassis FRU units such as Power-Supplies and Fan-Tray
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AvEntPhyChFruEntry

avEntPhyChFruEntry 1.3.6.1.4.1.6889.2.1.99.5.1.1
Table entry depicting the status of chassis FRU units such as Power-Supplies and Fan-Tray
Status: current Access: not-accessible
OBJECT-TYPE    
  AvEntPhyChFruEntry  

avEntPhyChFruOperStat 1.3.6.1.4.1.6889.2.1.99.5.1.1.1
Operational status of the chassis FRU unit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), fault(2), notPresent(3), unknown(255)  

avEntPhyChFruFault 1.3.6.1.4.1.6889.2.1.99.5.1.1.2
Description of fault, in case an FRU has failed
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), mulfunction(2), acFault(3), malfunctionAndAcFault(4), singleFanFault(5), multipleFanFault(6), badExpansionCable(7), unknown(255)  

avEntPhyChFruGroup 1.3.6.1.4.1.6889.2.1.99.5.2
avEntPhyChFruGroup
Status: current Access: read-only
OBJECT-GROUP    

avEntPhyChFruNotificationGroup 1.3.6.1.4.1.6889.2.1.99.5.3
avEntPhyChFruNotificationGroup
Status: current Access: read-only
NOTIFICATION-GROUP