ATM-OPT-MIB

File: ATM-OPT-MIB.mib (38640 bytes)

Imported modules

RFC1155-SMI

RFC-1212

Imported symbols

Counter

enterprises

OBJECT-TYPE

Defined Types

DisplayString
OCTET STRING

Cdx6500PPCTATMPortEntry
SEQUENCE
	atmPCfgPortNumber	INTEGER
	atmPCfgPortType	INTEGER
	atmPCfgMaxVPIRange	INTEGER
	atmPCfgMaxVCIRange	INTEGER
	atmPCfgLinkAssuranceTimer	INTEGER
	atmPCfgLinkAssuranceCount	INTEGER
	atmPCfgCCActDeactTimer	INTEGER
	atmPCfgCCActDeactCount	INTEGER
	atmPCfgVCCTrafficPrioritization	INTEGER

Cdx6500SPCTATMStationEntry
SEQUENCE
	atmSCfgPortNumber	INTEGER
	atmSCfgStnNumber	INTEGER
	atmSCfgVPI	INTEGER
	atmSCfgVCI	INTEGER
	atmSCfgLinkAssuranceMethod	INTEGER
	atmSCfgTrafficServiceCategory	INTEGER
	atmSCfgPeakCellRate	INTEGER
	atmSCfgVBRTrafficShaping	INTEGER
	atmSCfgVCCPriorityLevel	INTEGER
	atmSCfgSustainableCellRate	INTEGER
	atmSCfgMaximumBustSize	INTEGER

Cdx6500PPSTATMPortEntry
SEQUENCE
	atmPStatsPortNumber	INTEGER
	atmPStatsPortType	INTEGER
	atmPStatsPortStatus	DisplayString

Cdx6500PPSTATMDataSummaryEntry
SEQUENCE
	atmDataSummPortNumber	INTEGER
	atmPStatsOctetsInTotal	Counter
	atmPStatsOctetsOutTotal	Counter
	atmPStatsOctetsInPerSec	INTEGER
	atmPStatsOctetsOutPerSec	INTEGER
	atmPStatsFramesInTotal	Counter
	atmPStatsFramesOutTotal	Counter
	atmPStatsFramesInPerSec	INTEGER
	atmPStatsFramesOutPerSec	INTEGER
	atmPStatsOAMCellInTotal	Counter
	atmPStatsOAMCellOutTotal	Counter
	atmPStatsATMCellInTotal	Counter
	atmPStatsATMCellOutTotal	Counter
	atmPStatsErrorCellCor	INTEGER
	atmPStatsErrorCellDis	INTEGER
	atmPStatsCellDelineateState	DisplayString
	atmPStatsCellStateChangeTime	DisplayString
	atmPStatsDiscardedFrames	Counter

Cdx6500atmSGenStatsEntry
SEQUENCE
	atmSGenStatsPortNumber	INTEGER
	atmSGenStatsStnNumber	INTEGER
	atmSStatsStnStatus	DisplayString
	atmSStatsVPI	INTEGER
	atmSStatsVCI	INTEGER
	atmSStatsAdmState	INTEGER
	atmSStatsPeer	INTEGER
	atmSStatsAdjacent	INTEGER

Cdx6500atmSDataSummaryStatsEntry
SEQUENCE
	atmSDataSummStatsPortNumber	INTEGER
	atmSDataSummStatsStnNumber	INTEGER
	atmSStatsOctetsInTotal	Counter
	atmSStatsOctetsOutTotal	Counter
	atmSStatsFrameInTotal	Counter
	atmSStatsFrameOutTotal	Counter
	atmSStatsF5CellInTotal	Counter
	atmSStatsF5CellOutTotal	Counter
	atmSStatsAISCellInTotal	Counter
	atmSStatsRDICellInTotal	Counter
	atmSStatsRDICellOutTotal	Counter
	atmSStatsCCCellInTotal	Counter
	atmSStatsCCCellOutTotal	Counter
	atmSStatsVCFailure	INTEGER
	atmSStatsVCAssuranceState	DisplayString
	atmSStatsOctetsInPerSec	Counter
	atmSStatsOctetsOutPerSec	Counter
	atmSStatsFramesInPerSec	Counter
	atmSStatsFramesOutPerSec	Counter
	atmSStatsDiscardedFrames	Counter
	atmSStatsCIBitInForIWF	Counter
	atmSStatsCIBitOutForIWF	Counter
	atmSStatsCLPBitInForIWF	Counter
	atmSStatsCLPBitOutForIWF	Counter
	atmSStatsUUBitInForIWF	Counter
	atmSStatsUUBitOutForIWF	Counter

Cdx6500ATMPContEntry
SEQUENCE
	atmPContPortNumber	INTEGER
	atmPContPortControl	INTEGER

Cdx6500ATMSContEntry
SEQUENCE
	atmSContPortNumber	INTEGER
	atmSContStnNumber	INTEGER
	atmSContStnControl	INTEGER

Defined Values

codex		1.3.6.1.4.1.449
OBJECT IDENTIFIER

cdxProductSpecific		1.3.6.1.4.1.449.2
OBJECT IDENTIFIER

cdx6500		1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER

cdx6500Configuration		1.3.6.1.4.1.449.2.1.2
OBJECT IDENTIFIER

cdx6500CfgProtocolGroup		1.3.6.1.4.1.449.2.1.2.1
OBJECT IDENTIFIER

cdx6500PCTPortProtocolGroup		1.3.6.1.4.1.449.2.1.2.1.1
OBJECT IDENTIFIER

cdx6500PCTStationProtocolGroup		1.3.6.1.4.1.449.2.1.2.1.3
OBJECT IDENTIFIER

cdx6500Statistics		1.3.6.1.4.1.449.2.1.3
OBJECT IDENTIFIER

cdx6500StatProtocolGroup		1.3.6.1.4.1.449.2.1.3.1
OBJECT IDENTIFIER

cdx6500PSTPortProtocolGroup		1.3.6.1.4.1.449.2.1.3.1.1
OBJECT IDENTIFIER

cdx6500PSTStationProtocolGroup		1.3.6.1.4.1.449.2.1.3.1.3
OBJECT IDENTIFIER

cdx6500Controls		1.3.6.1.4.1.449.2.1.4
OBJECT IDENTIFIER

cdx6500PPCTATMPortTable		1.3.6.1.4.1.449.2.1.2.1.1.35
This table contains ATM Port configuration parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500PPCTATMPortEntry

cdx6500PPCTATMPortEntry		1.3.6.1.4.1.449.2.1.2.1.1.35.1
Entries in the ATM Port Configuration Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500PPCTATMPortEntry

atmPCfgPortNumber		1.3.6.1.4.1.449.2.1.2.1.1.35.1.1
Port number of this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmPCfgPortType		1.3.6.1.4.1.449.2.1.2.1.1.35.1.2
Port type of the Port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	atm(57)

atmPCfgMaxVPIRange		1.3.6.1.4.1.449.2.1.2.1.1.35.1.3
This parameter specifies the maximum VPI value that any station on this port can operate with. Increasing this value has the effect of decreasing the maximum VPI that can be specified .
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

atmPCfgMaxVCIRange		1.3.6.1.4.1.449.2.1.2.1.1.35.1.4
This parameter specifies the maximum VCI value that any station on this port can operate with. Increasing this value has the effect of decreasing the maximum VCI that can be specified .
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

atmPCfgLinkAssuranceTimer		1.3.6.1.4.1.449.2.1.2.1.1.35.1.5
If PVC Link Assurance Method is set to LOOPBACK, this is the amount of time in seconds between sending F5 loopback cells .
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

atmPCfgLinkAssuranceCount		1.3.6.1.4.1.449.2.1.2.1.1.35.1.6
If PVC Link Assurance Method is set to LOOPBACK, this is the number of retries sent before declaring that the link is down .
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

atmPCfgCCActDeactTimer		1.3.6.1.4.1.449.2.1.2.1.1.35.1.7
If PVC Link Assurance Method is set to NEGOTIATE CC cells this is the amount of time in seconds between retransmissions of Activate or Deactivate cells.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

atmPCfgCCActDeactCount		1.3.6.1.4.1.449.2.1.2.1.1.35.1.8
If PVC Link Assurance Method is set to NEGOTIATE CC cells this is the number of times to send an Activate or Deactivate cell before declaring that the negotiation procedure has failed .
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

atmPCfgVCCTrafficPrioritization		1.3.6.1.4.1.449.2.1.2.1.1.35.1.9
All station VCCs that operate on the port must run with the same traffic prioritization dicipline. This port parameter specifies the priorization as follows: DISABLE - There is no prioritization of traffic within a VCC. SEQUENCE - High priority and normal priority traffic are placed in separate queues which are serviced in sequential round robin order. PRIORITY - High priority and normal priority traffic are placed in separate queues. The high priority queue is serviced completely before the low priority queue.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disable(1), sequence(2), priority(3)

cdx6500SPCTATMStationTable		1.3.6.1.4.1.449.2.1.2.1.3.10
This table contains ATM Station configuration parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500SPCTATMStationEntry

cdx6500SPCTATMStationEntry		1.3.6.1.4.1.449.2.1.2.1.3.10.1
Entries in the ATM Station Configuration Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500SPCTATMStationEntry

atmSCfgPortNumber		1.3.6.1.4.1.449.2.1.2.1.3.10.1.1
The ATM port number corresponding to this station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSCfgStnNumber		1.3.6.1.4.1.449.2.1.2.1.3.10.1.2
The number of the configured ATM Station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSCfgVPI		1.3.6.1.4.1.449.2.1.2.1.3.10.1.3
The Virtual Path Identifier (VPI) is the provisioned virtual path number for the station of circuit type PVC on the ATM port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSCfgVCI		1.3.6.1.4.1.449.2.1.2.1.3.10.1.4
The Virtual Circuit Identifier (VCI) is the provisioned virtual circuit number for the station of circuit type PVC on the ATM port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSCfgLinkAssuranceMethod		1.3.6.1.4.1.449.2.1.2.1.3.10.1.5
PVC link assurance method to use: DISABLED - No checking is performed LOOPBACK - Periodically send a loopback cell NEGOTIATE - Negotiate use of CC cells ENABLED - Always use CC cells .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), loopback(2), enabled(3), nogotiate(4)

atmSCfgTrafficServiceCategory		1.3.6.1.4.1.449.2.1.2.1.3.10.1.6
The service category is the traffic type for the operation of the station. The traffic types are: UBR - Unspecified Bit Rate CBR - Constant Bit Rate VBR - Variable Bit Rate.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ubr(1), cbr(2), vbr(3)

atmSCfgPeakCellRate		1.3.6.1.4.1.449.2.1.2.1.3.10.1.7
This parameter (PCR) specifies the rate (cells per second) the network agrees to receive cells from the station PCR is configuredin multiples of 20 cells per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSCfgVBRTrafficShaping		1.3.6.1.4.1.449.2.1.2.1.3.10.1.8
Specifies whether a station configured for VBR traffic category conforms to single or dual leaky bucket traffic shaping. Single leaky bucket means the traffic is shaped to only a PCR. Dual bucket shaping means traffic is shaped to PCR as well as SCR and MBS. SINGLE - Single Bucket VBR DUAL - Dual Bucket VBR.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	single(2), dual(1)

atmSCfgVCCPriorityLevel		1.3.6.1.4.1.449.2.1.2.1.3.10.1.9
This parameter controls the priority of the station VCC in comparison to other stations within the same service category (either UBR or VBR). For VBR traffic category, setting this parameter to HIGH classifies a VCC as VBRrt (VBR real time). For VBRnrt (non-real time) select NORMAL. NORMAL - Normal priority HIGH - High priority.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), high(2)

atmSCfgSustainableCellRate		1.3.6.1.4.1.449.2.1.2.1.3.10.1.10
This parameter (SCR) specifies the rate (cells per second) the network agrees to receive cells from the station. This parameter characterizes the amount of sustainable bandwidth for VBR traffic class. The SCR cannot be greater than the link speed: 3620 for T1, 4800 for E1, 105500 for T3 (96000 for PLCP), 81040 for E3.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	128..30000

atmSCfgMaximumBustSize		1.3.6.1.4.1.449.2.1.2.1.3.10.1.11
Maximum burst size for VBR traffic in cells
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

cdx6500PPSTATMPStatsTable		1.3.6.1.4.1.449.2.1.3.1.1.36
OBJECT IDENTIFIER

cdx6500PPSTATMPortTable		1.3.6.1.4.1.449.2.1.3.1.1.36.1
This table contains ATM Port Statistics parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500PPSTATMPortEntry

cdx6500PPSTATMPortEntry		1.3.6.1.4.1.449.2.1.3.1.1.36.1.1
Entries in the ATM Port Statistics Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500PPSTATMPortEntry

atmPStatsPortNumber		1.3.6.1.4.1.449.2.1.3.1.1.36.1.1.1
The port number of the ATM port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmPStatsPortType		1.3.6.1.4.1.449.2.1.3.1.1.36.1.1.2
Port type of this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	atm(57)

atmPStatsPortStatus		1.3.6.1.4.1.449.2.1.3.1.1.36.1.1.3
Specifies the current port status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

cdx6500PPSTATMDataSummaryTable		1.3.6.1.4.1.449.2.1.3.1.1.36.2
This table contains ATM Port Data Summary Statistics parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500PPSTATMDataSummaryEntry

cdx6500PPSTATMDataSummaryEntry		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1
Entries in the ATM Port Data Summary Statistics Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500PPSTATMDataSummaryEntry

atmDataSummPortNumber		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.1
The port number of the ATM port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmPStatsOctetsInTotal		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.2
Number of characters received since last boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmPStatsOctetsOutTotal		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.3
Number of characters transmitted since last boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmPStatsOctetsInPerSec		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.4
Average number of characters received per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmPStatsOctetsOutPerSec		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.5
Average number of characters transmitted per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmPStatsFramesInTotal		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.6
Number of frames received since last boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmPStatsFramesOutTotal		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.7
Number of frames transmitted since last boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmPStatsFramesInPerSec		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.8
Average number of frames received per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmPStatsFramesOutPerSec		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.9
Average number of frames transmitted per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmPStatsOAMCellInTotal		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.10
Number of OAM Cells received since last boot or statistics.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmPStatsOAMCellOutTotal		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.11
Number of OAM Cells transmitted since last boot or statistics.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmPStatsATMCellInTotal		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.12
Number of ATM Cells received since last boot or statistics.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmPStatsATMCellOutTotal		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.13
Number of ATM Cells transmitted since last boot or statistics.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmPStatsErrorCellCor		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.14
HEC(Cor) errors in Physical Layer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmPStatsErrorCellDis		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.15
HEC(Dis) errors in Physical Layer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmPStatsCellDelineateState		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.16
ATM Physical Layer state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

atmPStatsCellStateChangeTime		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.17
The state change time in ATM Physical Layer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

atmPStatsDiscardedFrames		1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.18
The total number of dicarded frames.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500SPSTATMSStatsTable		1.3.6.1.4.1.449.2.1.3.1.3.11
OBJECT IDENTIFIER

atmSGenStatsTable		1.3.6.1.4.1.449.2.1.3.1.3.11.1
This table contains ATM Station Statistics parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500atmSGenStatsEntry

cdx6500atmSGenStatsEntry		1.3.6.1.4.1.449.2.1.3.1.3.11.1.1
Entries in the ATM Station Statistics Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500atmSGenStatsEntry

atmSGenStatsPortNumber		1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.1
The ATM port number corresponding to this station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSGenStatsStnNumber		1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.2
The number of the ATM Station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSStatsStnStatus		1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.3
Status of the station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

atmSStatsVPI		1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.4
The VPI of ATM Station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSStatsVCI		1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.5
The VCI of the ATM Station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSStatsAdmState		1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.6
The VCI of the ATM Station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

atmSStatsPeer		1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.7
The Peer state of the ATM Station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSStatsAdjacent		1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.8
The Adjacent state of the ATM Station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSDataSummaryStatsTable		1.3.6.1.4.1.449.2.1.3.1.3.11.2
This table contains ATM Station Data Summary Statistics parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500atmSDataSummaryStatsEntry

cdx6500atmSDataSummaryStatsEntry		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1
Entries in the ATM Station Data Summary Statistics Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500atmSDataSummaryStatsEntry

atmSDataSummStatsPortNumber		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.1
The ATM port number corresponding to this station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSDataSummStatsStnNumber		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.2
The number of the ATM station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSStatsOctetsInTotal		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.3
Number of characters received since last node boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsOctetsOutTotal		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.4
Number of characters transmitted since last node boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsFrameInTotal		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.5
Number of frames transmitted since last node boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsFrameOutTotal		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.6
Number of frames transmitted since last node boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsF5CellInTotal		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.7
Number of F5 Cells received since last node boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsF5CellOutTotal		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.8
Number of F5 Cells transmitted since last node boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsAISCellInTotal		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.9
Number of AIS Cells received since last node boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsRDICellInTotal		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.10
Number of RDI Cells received since last node boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsRDICellOutTotal		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.11
Number of RDI Cells transmitted since last node boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsCCCellInTotal		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.12
Number of CC Cells received since last node boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsCCCellOutTotal		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.13
Number of CC Cells transmitted since last node boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsVCFailure		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.14
The state of VC Failures.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmSStatsVCAssuranceState		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.15
The state of VC AssuranceState.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

atmSStatsOctetsInPerSec		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.16
The number of Octests in per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsOctetsOutPerSec		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.17
The number of Octests out per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsFramesInPerSec		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.18
The number of frames in per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsFramesOutPerSec		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.19
The number of frames out per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsDiscardedFrames		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.20
The total number of frames discarded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsCIBitInForIWF		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.21
The total number of CI Bit in.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsCIBitOutForIWF		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.22
The total number of CI Bit out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsCLPBitInForIWF		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.23
The total number of CLP Bit in.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsCLPBitOutForIWF		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.24
The total number of CLP Bit out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsUUBitInForIWF		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.25
The total number of UU Bit in.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmSStatsUUBitOutForIWF		1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.26
The total number of UU Bit out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500ContATMTable		1.3.6.1.4.1.449.2.1.4.24
OBJECT IDENTIFIER

cdx6500ATMPContTable		1.3.6.1.4.1.449.2.1.4.24.1
Control parameters for ATM ports.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500ATMPContEntry

cdx6500ATMPContEntry		1.3.6.1.4.1.449.2.1.4.24.1.1
Each control applies to a single ATM port.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500ATMPContEntry

atmPContPortNumber		1.3.6.1.4.1.449.2.1.4.24.1.1.1
Port number of the ATM port.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

atmPContPortControl		1.3.6.1.4.1.449.2.1.4.24.1.1.2
Control operations for the specified ATM port. boot - Boots the ATM port resetstats - Resets the ATM port statistics.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	boot(1), resetstats(2)

cdx6500ATMSContTable		1.3.6.1.4.1.449.2.1.4.24.2
Control parameters for ATM stations.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500ATMSContEntry

cdx6500ATMSContEntry		1.3.6.1.4.1.449.2.1.4.24.2.1
Each control applies to a single ATM station.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500ATMSContEntry

atmSContPortNumber		1.3.6.1.4.1.449.2.1.4.24.2.1.1
The ATM port number corresponding to this station.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..255

atmSContStnNumber		1.3.6.1.4.1.449.2.1.4.24.2.1.2
ATM station number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..254

atmSContStnControl		1.3.6.1.4.1.449.2.1.4.24.2.1.3
Control operations for the specified ATM station. boot - Boots the ATM station resetstats - Resets the ATM station statistics.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	boot(1), resetstats(2)