ATM-ADAPTER-MIB

File: ATM-ADAPTER-MIB.mib (15591 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises Counter DisplayString
OBJECT-TYPE

Defined Types

AtmfAdapterEntry  
SEQUENCE    
  atmfAdapterIndex INTEGER
  atmfAdapterSerialNumber INTEGER
  atmfAdapterDiagVersion INTEGER
  atmfAdapterSoftwareVersion INTEGER
  atmfAdapterTransmitBufSize INTEGER
  atmfAdapterReceiveBufSize INTEGER
  atmfAdapterTransmissionType OBJECT IDENTIFIER
  atmfAdapterMediaType OBJECT IDENTIFIER
  atmfAdapterOperStatus OBJECT IDENTIFIER
  atmfAdapterType OBJECT IDENTIFIER

AtmfAtmLayerEntry  
SEQUENCE    
  atmfAtmLayerIndex INTEGER
  atmfAtmLayerMaxVPCs INTEGER
  atmfAtmLayerMaxVCCs INTEGER
  atmfAtmLayerConfiguredVPCs INTEGER
  atmfAtmLayerConfiguredVCCs INTEGER
  atmfAtmLayerMaxVpiBits INTEGER
  atmfAtmLayerMaxVciBits INTEGER
  atmfAtmLayerUniType INTEGER

AtmfAtmStatsEntry  
SEQUENCE    
  atmfAtmStatsIndex INTEGER
  atmfAtmStatsReceivedCells Counter
  atmfAtmStatsDroppedPackets Counter
  atmfAtmStatsTransmittedCells Counter

Defined Values

ibm 2.1.2
OBJECT IDENTIFIER    

ibmProd 2.1.2.6
OBJECT IDENTIFIER    

atmAdapter 2.1.2.6.29
OBJECT IDENTIFIER    

atmAdapterAdmin 2.1.2.6.29.1
OBJECT IDENTIFIER    

atmAdapterMib 2.1.2.6.29.2
OBJECT IDENTIFIER    

atmfTrap 2.1.2.6.29.1.1
OBJECT IDENTIFIER    

atmfTransmissionTypes 2.1.2.6.29.1.2
OBJECT IDENTIFIER    

atmfMediaTypes 2.1.2.6.29.1.3
OBJECT IDENTIFIER    

atmfTypes 2.1.2.6.29.1.4
OBJECT IDENTIFIER    

atmfUnknownType 2.1.2.6.29.1.2.1
OBJECT IDENTIFIER    

atmfSonetSTS3c 2.1.2.6.29.1.2.2
OBJECT IDENTIFIER    

atmfDs3 2.1.2.6.29.1.2.3
OBJECT IDENTIFIER    

atmf4B5B 2.1.2.6.29.1.2.4
OBJECT IDENTIFIER    

atmf8B10B 2.1.2.6.29.1.2.5
OBJECT IDENTIFIER    

atmfMediaUnknownType 2.1.2.6.29.1.3.1
OBJECT IDENTIFIER    

atmfMediaCoaxCable 2.1.2.6.29.1.3.2
OBJECT IDENTIFIER    

atmfMediaSingleMode 2.1.2.6.29.1.3.3
OBJECT IDENTIFIER    

atmfMediaMultiMode 2.1.2.6.29.1.3.4
OBJECT IDENTIFIER    

atmfMediaStp 2.1.2.6.29.1.3.5
OBJECT IDENTIFIER    

atmfMediaUtp 2.1.2.6.29.1.3.6
OBJECT IDENTIFIER    

atmfUnknownAdapterType 2.1.2.6.29.1.4.1
OBJECT IDENTIFIER    

atmfTurbowaysATM-100 2.1.2.6.29.1.4.2
OBJECT IDENTIFIER    

muxatmTrap 2.1.2.6.29.1.1.1
An enterprise-specific trap is generated when this MIB variable is read. If the trap is generated, the value of the MIB variable is 1. If the trap fails, the value of the MIB variable is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

muxatmString 2.1.2.6.29.1.1.2
A simple string. It is the title of the ATM MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmfAdapterGroup 2.1.2.6.29.2.1
OBJECT IDENTIFIER    

atmfAtmLayerGroup 2.1.2.6.29.2.2
OBJECT IDENTIFIER    

atmfAtmStatsGroup 2.1.2.6.29.2.3
OBJECT IDENTIFIER    

atmfAdapterTable 2.1.2.6.29.2.1.1
A table containing all information about the adapter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmfAdapterEntry

atmfAdapterEntry 2.1.2.6.29.2.1.1.1
An entry in the table containing information about the adapter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmfAdapterEntry  

atmfAdapterIndex 2.1.2.6.29.2.1.1.1.1
A unique value which identifies this ATM adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atmfAdapterSerialNumber 2.1.2.6.29.2.1.1.1.2
The serial number from the VPD of the ATM adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atmfAdapterDiagVersion 2.1.2.6.29.2.1.1.1.3
The diagnostic version number from the VPD of the ATM adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atmfAdapterSoftwareVersion 2.1.2.6.29.2.1.1.1.4
The software version number from the VPD of the ATM adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atmfAdapterTransmitBufSize 2.1.2.6.29.2.1.1.1.5
The maximum transmit buffer size in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..9180  

atmfAdapterReceiveBufSize 2.1.2.6.29.2.1.1.1.6
The maximum receive buffer size in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..9180  

atmfAdapterTransmissionType 2.1.2.6.29.2.1.1.1.7
The Transmission type of this adapter. For example, for a adapter using the Sonet STS-3c physical layer at 155.52 Mbs, this object would have the Object Identifier Value:atmfSonetSTS3c. For the Turboways ATM 100 adapter this value shall be: atmf4B5B.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atmfAdapterMediaType 2.1.2.6.29.2.1.1.1.8
The type of media used on this port. For example, for a adapter using coaxial cable, this object would have the Object Identifier value: atmfMediaCoaxCable. For the Turboways ATM 100 adapter the media type shall be: atmfMediaMultiMode
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atmfAdapterOperStatus 2.1.2.6.29.2.1.1.1.9
The operational (i.e., actual) state of this adapter. An alarm should not be generated on physical interface when the value of this object is outOfService(3). This capability is useful if equipment is to be disconnected, or for trouble shooting purposes. A value of loopBack(4) indicates that a local loopback is in place.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), inService(2), outOfService(3), loopBack(4)  

atmfAdapterType 2.1.2.6.29.2.1.1.1.10
The hardware type of this adapter. For example if the adapter is 100 Mbits MultiMode fiber adapter, then this object would have the Object Identifier value: atmfTurbowaysATM-100
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atmfAtmLayerTable 2.1.2.6.29.2.2.1
A table containing ATM layer configuration information
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmfAtmLayerEntry

atmfAtmLayerEntry 2.1.2.6.29.2.2.1.1
An entry in the table containing configuration information about the adapter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmfAtmLayerEntry  

atmfAtmLayerIndex 2.1.2.6.29.2.2.1.1.1
A unique value which identifies this ATM adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atmfAtmLayerMaxVPCs 2.1.2.6.29.2.2.1.1.2
The maximum number of VPCs supported on this User to Network Interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

atmfAtmLayerMaxVCCs 2.1.2.6.29.2.2.1.1.3
The maximum number of VCCs supported on this User to Network Interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

atmfAtmLayerConfiguredVPCs 2.1.2.6.29.2.2.1.1.4
The number of VPCs configured for use on this User to Network Interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

atmfAtmLayerConfiguredVCCs 2.1.2.6.29.2.2.1.1.5
The number of VCCs configured for use on this User to Network Interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

atmfAtmLayerMaxVpiBits 2.1.2.6.29.2.2.1.1.6
The number of active VPI bits on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..8  

atmfAtmLayerMaxVciBits 2.1.2.6.29.2.2.1.1.7
The number of active VCI bits on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16  

atmfAtmLayerUniType 2.1.2.6.29.2.2.1.1.8
The type of the ATM User to Network Interface, either public or private.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER public(1), private(2)  

atmfAtmStatsTable 2.1.2.6.29.2.3.1
A table containing ATM layer statistics information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmfAtmStatsEntry

atmfAtmStatsEntry 2.1.2.6.29.2.3.1.1
An entry in the table containing information about statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmfAtmStatsEntry  

atmfAtmStatsIndex 2.1.2.6.29.2.3.1.1.1
A unique value which identifies this ATM adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atmfAtmStatsReceivedCells 2.1.2.6.29.2.3.1.1.2
The accumulated number of ATM cells received on this interface which were assigned and not dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmfAtmStatsDroppedPackets 2.1.2.6.29.2.3.1.1.3
The accumulated number of ATM packets which were dropped due to errors in the cell formatting.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atmfAtmStatsTransmittedCells 2.1.2.6.29.2.3.1.1.4
The accumulated number of assigned ATM cells which were transmitted across this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor