ASKEY-ADSL-MIB

File: ASKEY-ADSL-MIB.mib (56275 bytes)

Imported modules

IF-MIB SNMPv2-SMI RFC1155-SMI
SNMP-FRAMEWORK-MIB PerfHist-TC-MIB ADSL-TC-MIB
ADSL-LINE-MIB ASKEY-DSLAM-MIB ASKEY-ENTITY-ALARM-MIB
Q-BRIDGE-MIB

Imported symbols

ifIndex MODULE-IDENTITY OBJECT-TYPE
Unsigned32 Counter32 Integer32
Gauge32 Gauge SnmpAdminString
PerfCurrentCount PerfIntervalCount AdslPerfCurrDayCount
AdslPerfPrevDayCount adslLineConfProfileEntry adslLineAlarmConfProfileEntry
adslAtucPerfDataEntry adslAturPerfDataEntry adslAtucIntervalEntry
adslAturIntervalEntry adslLineEntry ipDslam
aeAlarmPhysicalIndex PortList

Defined Types

AdslAlarmConfProfileExt2Entry  
SEQUENCE    
  adslAtucThreshold1DayEsL Integer32
  adslAtucThreshold1DaySesL Integer32
  adslAtucThreshold1DayUasL Integer32
  adslAturThreshold1DayEsL Integer32
  adslAturThreshold1DaySesL Integer32
  adslAturThreshold1DayUasL Integer32

AdslAtucBitAllocationEntry  
SEQUENCE    
  adslAtucBitAllocationNumber OCTET STRING

AdslAturBitAllocationEntry  
SEQUENCE    
  adslAturBitAllocationNumber OCTET STRING

AskeyADSLConfProfileExtEntry  
SEQUENCE    
  adslAtucConfMaxNominalPSD INTEGER
  adslAturConfMaxNominalPSD INTEGER
  adslConfSRAModeEnabled INTEGER
  adslConfPwrMgtL2Mode INTEGER
  adslConfPwrMgtL2MinRate Unsigned32
  adslConfPwrMgtL2MaxRate Unsigned32
  adslConfPwrMgtLowerL2ContinuousTime INTEGER
  adslConfPwrMgtL0Time INTEGER
  adslConfPwrMgtL3Accepted INTEGER
  adslConfAtucMinINP INTEGER
  adslConfAturMinINP INTEGER

AskeyAdslAtucPerfExtEntry  
SEQUENCE    
  aAdslAtucPerfCurr15MinReceivedCells PerfCurrentCount
  aAdslAtucPerfCurr15MinTransmittedCells PerfCurrentCount
  aAdslAtucPerfCurr15MinCodeViolation PerfCurrentCount
  aAdslAtucPerfCurr15MinFailInits PerfCurrentCount
  aAdslAtucPerfCurr1DayReceivedCells AdslPerfCurrDayCount
  aAdslAtucPerfCurr1DayTransmittedCells AdslPerfCurrDayCount
  aAdslAtucPerfCurr1DayCodeViolation AdslPerfCurrDayCount
  aAdslAtucPerfCurr1DayFailInits AdslPerfCurrDayCount
  aAdslAtucPerfPrev1DayReceivedCells AdslPerfPrevDayCount
  aAdslAtucPerfPrev1DayTransmittedCells AdslPerfPrevDayCount
  aAdslAtucPerfPerf1DayCodeViolation AdslPerfPrevDayCount
  aAdslAtucPerfPerf1DayFailInits AdslPerfPrevDayCount

AskeyAdslAturPerfExtEntry  
SEQUENCE    
  aAdslAturPerfCurr15MinCodeViolation PerfCurrentCount
  aAdslAturPerfCurr1DayCodeViolation AdslPerfCurrDayCount
  aAdslAturPerfPerf1DayCodeViolation AdslPerfPrevDayCount

AskeyAdslAtucIntervalExtEntry  
SEQUENCE    
  aAdslAtucIntervalReceivedCells PerfIntervalCount
  aAdslAtucIntervalTransmittedCells PerfIntervalCount
  aAdslAtucIntervalCodeViolation PerfIntervalCount
  aAdslAtucIntervalFailInits PerfIntervalCount

AskeyAdslAturIntervalExtEntry  
SEQUENCE    
  aAdslAturIntervalCodeViolation PerfIntervalCount

AskeyADSLLineStatusExtEntry  
SEQUENCE    
  askeyADSLLineStandard INTEGER
  askeyADSLLinePwrMgtMode INTEGER
  askeyADSLLinePwrMgtState INTEGER
  askeyADSLLinePwrMgtTransManual INTEGER
  askeyADSLLineAtucCurrINP INTEGER
  askeyADSLLineAturCurrINP INTEGER

AskeyCPEWirelessEntry  
SEQUENCE    
  askeyCPEWirelessAdminState INTEGER
  askeyCPEWirelessOperState INTEGER

AskeyADSLCardFilterEntry  
SEQUENCE    
  dsBroadcastFilterVLANID PortList

Defined Values

askeyADSLMib 1.3.6.1.4.1.3646.1300.2.2
ASKEY ADSL MIB OID defines and documentation.
MODULE-IDENTITY    

askeyADSLMibObjects 1.3.6.1.4.1.3646.1300.2.2.1
OBJECT IDENTIFIER    

adslAlarmConfProfileExt2Table 1.3.6.1.4.1.3646.1300.2.2.1.1
This table extends the adslLineAlarmConfProfileTable and provides threshold parameters for all the counters defined in this MIB module.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdslAlarmConfProfileExt2Entry

adslAlarmConfProfileExt2Entry 1.3.6.1.4.1.3646.1300.2.2.1.1.1
An entry extends the adslLineAlarmConfProfileTable defined in [RFC2662]. Each entry corresponds to an ADSL alarm profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  AdslAlarmConfProfileExt2Entry  

adslAtucThreshold1DayEsL 1.3.6.1.4.1.3646.1300.2.2.1.1.1.1
The first time the value of the corresponding instance of adslAtucPerf1DayEsL reaches or exceeds this value within a given 1-day performance data collection period, an adslAtucEsLThreshTrap notification will be generated. The value '0' will disable the notification. The default value of this object is '0'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..86400  

adslAtucThreshold1DaySesL 1.3.6.1.4.1.3646.1300.2.2.1.1.1.2
The first time the value of the corresponding instance of adslAtucPerf1DaySesL reaches or exceeds this value within a given 1-day performance data collection period, an adslAtucSesLThreshTrap notification will be generated. The value '0' will disable the notification. The default value of this object is '0'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..86400  

adslAtucThreshold1DayUasL 1.3.6.1.4.1.3646.1300.2.2.1.1.1.3
The first time the value of the corresponding instance of adslAtucPerf1DayUasL reaches or exceeds this value within a given 1-day performance data collection period, an adslAtucUasLThreshTrap notification will be generated. The value '0' will disable the notification. The default value of this object is '0'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..86400  

adslAturThreshold1DayEsL 1.3.6.1.4.1.3646.1300.2.2.1.1.1.4
The first time the value of the corresponding instance of adslAturPerf1DayEsL reaches or exceeds this value within a given 1-day performance data collection period, an adslAturEsLThreshTrap notification will be generated. The value '0' will disable the notification. The default value of this object is '0'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..86400  

adslAturThreshold1DaySesL 1.3.6.1.4.1.3646.1300.2.2.1.1.1.5
The first time the value of the corresponding instance of adslAturPerf1DaySesL reaches or exceeds this value within a given 1-day performance data collection period, an adslAturSesLThreshTrap notification will be generated. The value '0' will disable the notification. The default value of this object is '0'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..86400  

adslAturThreshold1DayUasL 1.3.6.1.4.1.3646.1300.2.2.1.1.1.6
The first time the value of the corresponding instance of adslAturPerf1DayUasL reaches or exceeds this value within a given 1-day performance data collection period, an adslAturUasLThreshTrap notification will be generated. The value '0' will disable the notification. The default value of this object is '0'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..86400  

adslAtucBitAllocationTable 1.3.6.1.4.1.3646.1300.2.2.1.2
This table specify bit allocation table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdslAtucBitAllocationEntry

adslAtucBitAllocationEntry 1.3.6.1.4.1.3646.1300.2.2.1.2.1
An entry in the adslBitAllocationTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  AdslAtucBitAllocationEntry  

adslAtucBitAllocationNumber 1.3.6.1.4.1.3646.1300.2.2.1.2.1.1
Bit number for 1..512 tone. That is, the length must be 256
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(512)  

adslAturBitAllocationTable 1.3.6.1.4.1.3646.1300.2.2.1.3
This table specify bit allocation table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdslAturBitAllocationEntry

adslAturBitAllocationEntry 1.3.6.1.4.1.3646.1300.2.2.1.3.1
An entry in the adslBitAllocationTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  AdslAturBitAllocationEntry  

adslAturBitAllocationNumber 1.3.6.1.4.1.3646.1300.2.2.1.3.1.1
Bit number for 1..64 tone. That is, the length must be 64
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(64)  

adslLoopDiagObjects 1.3.6.1.4.1.3646.1300.2.2.1.4
OBJECT IDENTIFIER    

adslLoopDiagIfIndex 1.3.6.1.4.1.3646.1300.2.2.1.4.1
The ifIndex of the target interface to do loop diagnostic
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

adslLoopDiagProfileName 1.3.6.1.4.1.3646.1300.2.2.1.4.2
The profile used to do loop diagnostic
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

adslLoopDiagAction 1.3.6.1.4.1.3646.1300.2.2.1.4.3
Set to start to trigger ADSL2/ADSL2+ loop diagnostics. Once loop diagnostic is started, the status will reflect in adslLoopDiagCurrStatus. Set to cancel can allow user to cancel an ongoing loop diagnostics process. Reading this variable is meaningless, the result will always be 0.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), start(1), cancel(2)  

adslLoopDiagLastStatus 1.3.6.1.4.1.3646.1300.2.2.1.4.4
This variable indicats status of last loop diagnostic on this line.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noStatus(0), onProcess(1), success(2), failed(3)  

adslLoopDiagFailReason 1.3.6.1.4.1.3646.1300.2.2.1.4.5
Fail reason if loop diagnostic is failed. no fail reason is reported (0) IfIndex is not invalid (1) used profile does not exist or is inactive (2) line card does not exist (3) HWAPI return error (4) cancelled by user (5) line initialization fail (6) no atu-r is detected (7) line doesn't enter show-time state (8) timeout, result is not available (9) port monitoring is performing, loop diag can not perform at the same time (10)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

adslLoopDiagResultAtucAttainableRate 1.3.6.1.4.1.3646.1300.2.2.1.4.6
Valid only while adslLoopDiagCurrStatus is success.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

adslLoopDiagResultAtucLoopAttenuation 1.3.6.1.4.1.3646.1300.2.2.1.4.7
Valid only while adslLoopDiagCurrStatus is success.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..630  

adslLoopDiagResultAtucSignalAttenuation 1.3.6.1.4.1.3646.1300.2.2.1.4.8
Valid only while adslLoopDiagCurrStatus is success.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..630  

adslLoopDiagResultAtucSnrMargin 1.3.6.1.4.1.3646.1300.2.2.1.4.9
Valid only while adslLoopDiagCurrStatus is success.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -640..640  

adslLoopDiagResultAtucTxPower 1.3.6.1.4.1.3646.1300.2.2.1.4.10
Valid only while adslLoopDiagCurrStatus is success.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -310..310  

adslLoopDiagResultAturAttainableRate 1.3.6.1.4.1.3646.1300.2.2.1.4.11
Valid only while adslLoopDiagCurrStatus is success.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

adslLoopDiagResultAturLoopAttenuation 1.3.6.1.4.1.3646.1300.2.2.1.4.12
Valid only while adslLoopDiagCurrStatus is success.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..630  

adslLoopDiagResultAturSignalAttenuation 1.3.6.1.4.1.3646.1300.2.2.1.4.13
Valid only while adslLoopDiagCurrStatus is success.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..630  

adslLoopDiagResultAturSnrMargin 1.3.6.1.4.1.3646.1300.2.2.1.4.14
Valid only while adslLoopDiagCurrStatus is success.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -640..640  

adslLoopDiagResultAturTxPower 1.3.6.1.4.1.3646.1300.2.2.1.4.15
Valid only while adslLoopDiagCurrStatus is success.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -310..310  

adslLoopDiagResultDsHlogM 1.3.6.1.4.1.3646.1300.2.2.1.4.16
This object provides an array of downstream Hlog(f) m. The m of subcarrier(i) is 256*Octect(2i)+Octect(2i+1), i=0~511. To get real value of Hlog(f), it is caculated as (6-m(i)/10). A special value 1023 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the attenuation is out of range to be represented.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1024)  

adslLoopDiagResultUsHlogM 1.3.6.1.4.1.3646.1300.2.2.1.4.17
This object provides an array of upstream Hlog(f) m. The m of subcarrier(i) is 256*Octect(2i)+Octect(2i+1), i=0~63. To get real value of Hlog(f), it is caculated as (6-m(i)/10). A special value 1023 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the attenuation is out of range to be represented.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(128)  

adslLoopDiagResultDsQuietLinePsdN 1.3.6.1.4.1.3646.1300.2.2.1.4.18
This object provides an array of downstream quiet line noise PSD n. The n of subcarrier(i) is Octect(i), i=0~511. To get real value of QLN(f), it is caculated as (-23-n(i)/2). A special value 255 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise PSD is out of range to be represented.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(512)  

adslLoopDiagResultUsQuietLinePsdN 1.3.6.1.4.1.3646.1300.2.2.1.4.19
This object provides an array of upstream quiet line noise PSD n. The n of subcarrier(i) is Octect(i), i=0~63. To get real value of QLN(f), it is caculated as (-23-n(i)/2). A special value 255 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise PSD is out of range to be represented.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(64)  

adslLoopDiagResultDsSnrN 1.3.6.1.4.1.3646.1300.2.2.1.4.20
This table used for ADSL2/ADSL2+ downstream loop diagnostics SNR.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(512)  

adslLoopDiagResultUsSnrN 1.3.6.1.4.1.3646.1300.2.2.1.4.21
This table used for ADSL2/ADSL2+ upstream loop diagnostics SNR. value of subcarrier(i) is Octect(i)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(64)  

askeyADSLConfProfileExtTable 1.3.6.1.4.1.3646.1300.2.2.1.5
This parameter represents the maximum nominal transmit PSD in the downstream direction during initialization and showtime (in dBm/Hz). It ranges from -60 to -40 dBm/Hz, with 0.1 dB steps.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AskeyADSLConfProfileExtEntry

askeyADSLConfProfileExtEntry 1.3.6.1.4.1.3646.1300.2.2.1.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AskeyADSLConfProfileExtEntry  

adslAtucConfMaxNominalPSD 1.3.6.1.4.1.3646.1300.2.2.1.5.1.1
atu-c max nominal power spectrum desity
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -400..40  

adslAturConfMaxNominalPSD 1.3.6.1.4.1.3646.1300.2.2.1.5.1.2
atu-r max nominal power spectrum desity
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -400..40  

adslConfSRAModeEnabled 1.3.6.1.4.1.3646.1300.2.2.1.5.1.3
The seamless rate adaptive mode can force dynamic rate mode changing rate at runtime without retraining. This object is only applies to dynamic rate mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

adslConfPwrMgtL2Mode 1.3.6.1.4.1.3646.1300.2.2.1.5.1.4
Line power management L2 mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER manual(0), automatic(1)  

adslConfPwrMgtL2MinRate 1.3.6.1.4.1.3646.1300.2.2.1.5.1.5
minimum rate and low-bound to data rate for power management L2 state.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 32000..29984000  

adslConfPwrMgtL2MaxRate 1.3.6.1.4.1.3646.1300.2.2.1.5.1.6
maximum rate to data rate for power management L2 state.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 32000..29984000  

adslConfPwrMgtLowerL2ContinuousTime 1.3.6.1.4.1.3646.1300.2.2.1.5.1.7
The continuous time of line rate lower than L2 low-bound. Line can start transferring into L2 after this time pass.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

adslConfPwrMgtL0Time 1.3.6.1.4.1.3646.1300.2.2.1.5.1.8
The minimum time in L0 state before line starts to check L2 criteria.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

adslConfPwrMgtL3Accepted 1.3.6.1.4.1.3646.1300.2.2.1.5.1.9
This object indicates whether the ADSL lines accept CPE power management L3 request. If it is, the ADSL lines applied this profile will accept request from CPE and transfer their power management state into L3 by the CPE request.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER denied(0), accepted(1)  

adslConfAtucMinINP 1.3.6.1.4.1.3646.1300.2.2.1.5.1.10
ATUC(i.e. downstream) minimum INP(Impulse Noise Protect) capability. The object value indicates the multiple of INP symbol. For example, 'time-4' means four times.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER times-0(0), times-half(1), times-1(2), times-2(3), times-4(4), times-8(5), times-16(6)  

adslConfAturMinINP 1.3.6.1.4.1.3646.1300.2.2.1.5.1.11
ATUR(i.e. upstream) minimum INP(Impulse Noise Protect) capability. The object value indicates the multiple of INP symbol. For example, 'time-4' means four times.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER times-0(0), times-half(1), times-1(2), times-2(3), times-4(4), times-8(5), times-16(6)  

askeyAdslAtucPerfExtTable 1.3.6.1.4.1.3646.1300.2.2.1.10
This table extends the adslAtucPerfDataTable to provide received and transmitted user cell counters, code violation and fail initialization counts.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AskeyAdslAtucPerfExtEntry

askeyAdslAtucPerfExtEntry 1.3.6.1.4.1.3646.1300.2.2.1.10.1
An entry extends the adslAtucPerfDataEntry defined in [RFC2662]. Each entry corresponds to an ADSL interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AskeyAdslAtucPerfExtEntry  

aAdslAtucPerfCurr15MinReceivedCells 1.3.6.1.4.1.3646.1300.2.2.1.10.1.1
Count of all user cells received on this interface within the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

aAdslAtucPerfCurr15MinTransmittedCells 1.3.6.1.4.1.3646.1300.2.2.1.10.1.2
Count of all user cells transmitted on this interface within the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

aAdslAtucPerfCurr15MinCodeViolation 1.3.6.1.4.1.3646.1300.2.2.1.10.1.3
Count of code violations on this interface within the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

aAdslAtucPerfCurr15MinFailInits 1.3.6.1.4.1.3646.1300.2.2.1.10.1.4
Count of failed initializations on this interface within the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

aAdslAtucPerfCurr1DayReceivedCells 1.3.6.1.4.1.3646.1300.2.2.1.10.1.5
Count of all user cells received on this interface during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.
Status: current Access: read-only
OBJECT-TYPE    
  AdslPerfCurrDayCount  

aAdslAtucPerfCurr1DayTransmittedCells 1.3.6.1.4.1.3646.1300.2.2.1.10.1.6
Count of all user cells transmitted on this interface during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.
Status: current Access: read-only
OBJECT-TYPE    
  AdslPerfCurrDayCount  

aAdslAtucPerfCurr1DayCodeViolation 1.3.6.1.4.1.3646.1300.2.2.1.10.1.7
Count of code violations on this interface during the current day.
Status: current Access: read-only
OBJECT-TYPE    
  AdslPerfCurrDayCount  

aAdslAtucPerfCurr1DayFailInits 1.3.6.1.4.1.3646.1300.2.2.1.10.1.8
Count of full initializations on this interface during the current day.
Status: current Access: read-only
OBJECT-TYPE    
  AdslPerfCurrDayCount  

aAdslAtucPerfPrev1DayReceivedCells 1.3.6.1.4.1.3646.1300.2.2.1.10.1.9
Count of all user cells received on this interface within the most recent previous 1-day period.
Status: current Access: read-only
OBJECT-TYPE    
  AdslPerfPrevDayCount  

aAdslAtucPerfPrev1DayTransmittedCells 1.3.6.1.4.1.3646.1300.2.2.1.10.1.10
Count of all user cells transmitted on this interface within the most recent previous 1-day period.
Status: current Access: read-only
OBJECT-TYPE    
  AdslPerfPrevDayCount  

aAdslAtucPerfPerf1DayCodeViolation 1.3.6.1.4.1.3646.1300.2.2.1.10.1.11
Count of code violations on this interface within the most recent previous 1-day period.
Status: current Access: read-only
OBJECT-TYPE    
  AdslPerfPrevDayCount  

aAdslAtucPerfPerf1DayFailInits 1.3.6.1.4.1.3646.1300.2.2.1.10.1.12
Count of full initializations on this interface within the most recent previous 1-day period.
Status: current Access: read-only
OBJECT-TYPE    
  AdslPerfPrevDayCount  

askeyAdslAturPerfExtTable 1.3.6.1.4.1.3646.1300.2.2.1.11
This table extends the adslAturPerfDataTable to provide more performance information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AskeyAdslAturPerfExtEntry

askeyAdslAturPerfExtEntry 1.3.6.1.4.1.3646.1300.2.2.1.11.1
An entry extends the adslAturPerfDataEntry defined in [RFC2662]. Each entry corresponds to an ADSL interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AskeyAdslAturPerfExtEntry  

aAdslAturPerfCurr15MinCodeViolation 1.3.6.1.4.1.3646.1300.2.2.1.11.1.1
Count of code violations on this interface within the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCurrentCount  

aAdslAturPerfCurr1DayCodeViolation 1.3.6.1.4.1.3646.1300.2.2.1.11.1.2
Count of code violations on this interface within the current 1 day interval.
Status: current Access: read-only
OBJECT-TYPE    
  AdslPerfCurrDayCount  

aAdslAturPerfPerf1DayCodeViolation 1.3.6.1.4.1.3646.1300.2.2.1.11.1.3
Count of code violations on this interface within the most recent previous 1-day period.
Status: current Access: read-only
OBJECT-TYPE    
  AdslPerfPrevDayCount  

askeyAdslAtucIntervalExtTable 1.3.6.1.4.1.3646.1300.2.2.1.12
This table extends the adslAtucIntervalTable to provide more performance informations
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AskeyAdslAtucIntervalExtEntry

askeyAdslAtucIntervalExtEntry 1.3.6.1.4.1.3646.1300.2.2.1.12.1
An entry extends the adslAtucIntervalEntry defined in [RFC2662].
Status: current Access: not-accessible
OBJECT-TYPE    
  AskeyAdslAtucIntervalExtEntry  

aAdslAtucIntervalReceivedCells 1.3.6.1.4.1.3646.1300.2.2.1.12.1.1
Count of all user cells received on this interface during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

aAdslAtucIntervalTransmittedCells 1.3.6.1.4.1.3646.1300.2.2.1.12.1.2
Count of all user cells transmitted on this interface during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

aAdslAtucIntervalCodeViolation 1.3.6.1.4.1.3646.1300.2.2.1.12.1.3
Count of code violations on this interface during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

aAdslAtucIntervalFailInits 1.3.6.1.4.1.3646.1300.2.2.1.12.1.4
Count of full initializations on this interface during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

askeyAdslAturIntervalExtTable 1.3.6.1.4.1.3646.1300.2.2.1.13
This table extends the adslAturIntervalTable to provide more perfomance information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AskeyAdslAturIntervalExtEntry

askeyAdslAturIntervalExtEntry 1.3.6.1.4.1.3646.1300.2.2.1.13.1
An entry extends the adslAturIntervalEntry defined in [RFC2662].
Status: current Access: not-accessible
OBJECT-TYPE    
  AskeyAdslAturIntervalExtEntry  

aAdslAturIntervalCodeViolation 1.3.6.1.4.1.3646.1300.2.2.1.13.1.1
Count of code violations on this interface during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

adslPortMonitorObjects 1.3.6.1.4.1.3646.1300.2.2.1.14
OBJECT IDENTIFIER    

adslPortMonitorIfIndex 1.3.6.1.4.1.3646.1300.2.2.1.14.1
The ifIndex of target adsl port to do port monitor.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

adslPortMonitorAction 1.3.6.1.4.1.3646.1300.2.2.1.14.2
Set to start to port monitor. Once loop diagnostic is started, the status will reflect in adslPortMonitorCurrStatus. Set to cancel can allow user to cancel an ongoing loop diagnostics process. Reading this variable is meaningless, the result will always be 0.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), start(1), cancel(2)  

adslPortMonitorLastStatus 1.3.6.1.4.1.3646.1300.2.2.1.14.3
This variable indicats status of last time port monitor is performed. If adslPortMonitorIfIndex is changed, this value wil reset to noStatus.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noStatus(0), onProcess(1), success(2), failed(3)  

adslPortMonitorFailReason 1.3.6.1.4.1.3646.1300.2.2.1.14.4
The fail reason of last time port monitor is failed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

adslPortMonitorResultDsHlogM 1.3.6.1.4.1.3646.1300.2.2.1.14.5
This object provides an array of downstream Hlog(f) m. The m of subcarrier(i) is 256*Octect(2i)+Octect(2i+1), i=0~511. To get real value of Hlog(f), it is caculated as (6-m(i)/10). A special value 1023 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the attenuation is out of range to be represented.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1024)  

adslPortMonitorResultUsHlogM 1.3.6.1.4.1.3646.1300.2.2.1.14.6
This object provides an array of upstream Hlog(f) m. The m of subcarrier(i) is 256*Octect(2i)+Octect(2i+1), i=0~63. To get real value of Hlog(f), it is caculated as (6-m(i)/10). A special value 1023 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the attenuation is out of range to be represented.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(128)  

adslPortMonitorResultDsQuietLinePsdN 1.3.6.1.4.1.3646.1300.2.2.1.14.7
This object provides an array of downstream quiet line noise PSD n. The n of subcarrier(i) is Octect(i), i=0~511. To get real value of QLN(f), it is caculated as (-23-n(i)/2). A special value 255 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise PSD is out of range to be represented.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(512)  

adslPortMonitorResultUsQuietLinePsdN 1.3.6.1.4.1.3646.1300.2.2.1.14.8
This object provides an array of upstream quiet line noise PSD n. The n of subcarrier(i) is Octect(i), i=0~63. To get real value of QLN(f), it is caculated as (-23-n(i)/2). A special value 255 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise PSD is out of range to be represented.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(64)  

adslSingleEndLoopTestObjects 1.3.6.1.4.1.3646.1300.2.2.1.15
OBJECT IDENTIFIER    

adslSingleEndLoopTestIfIndex 1.3.6.1.4.1.3646.1300.2.2.1.15.1
The ifIndex of target adsl port to do SELT.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

adslSingleEndLoopTestAction 1.3.6.1.4.1.3646.1300.2.2.1.15.2
Set to start to SELT. Once loop diagnostic is started, the status will reflect in adslPortMonitorCurrStatus. Reading this variable is meaningless, the result will always be 0.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), start(1)  

adslSingleEndLoopTestLastStatus 1.3.6.1.4.1.3646.1300.2.2.1.15.3
This variable indicats status of last time SELT is performed. If adslSingleEndLoopTestIfIndex is changed, this value wil reset to noStatus.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noStatus(0), onProcess(1), success(2), failed(3)  

adslSingleEndLoopTestFailReason 1.3.6.1.4.1.3646.1300.2.2.1.15.4
Fail reason if single end loop test is failed. no fail reason is reported (0) IfIndex is not invalid (1) line card does not exist (3) HWAPI return error (4) timeout, result is not available (9) port monitoring is performing, loop diag can not perform at the same time (10)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

adslSingleEndLoopTestResultCableType 1.3.6.1.4.1.3646.1300.2.2.1.15.5
This object provides an the line type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), cab24Awg(1), cab26Awg(2)  

adslSingleEndLoopTestResultLoopLength 1.3.6.1.4.1.3646.1300.2.2.1.15.6
This object provides line length.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

askeyADSLLineStatusExtTable 1.3.6.1.4.1.3646.1300.2.2.1.16
This table is a adslLineTable extended table for line status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AskeyADSLLineStatusExtEntry

askeyADSLLineStatusExtEntry 1.3.6.1.4.1.3646.1300.2.2.1.16.1
The entry into extended ADSL line status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AskeyADSLLineStatusExtEntry  

askeyADSLLineStandard 1.3.6.1.4.1.3646.1300.2.2.1.16.1.1
Current ADSL line standard.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER g9912-annex-A(0), g9912-annex-B(1), vdsl-committee-t1-mcm(2), vdsl-etsi-mcm(3), g9921-annex-A(4), g9921-annex-B(5), g9921-annex-C(6), g9921-annex-H(7), g9921-annex-I(8), g9922-annex-A(9), g9922-annex-C(10), g9923-annex-A(11), g9923-annex-B(12), g9923-annex-I(13), g9923-annex-J(14), g9923-annex-L-readsl(15), g9924-annex-A(16), g9924-annex-I(17), g9925-annex-A(18), g9925-annex-B(19), g9925-annex-I(20), sadsl(21), ansi-t1-413(22), etsi-ts-101-388(23), reserved(24)  

askeyADSLLinePwrMgtMode 1.3.6.1.4.1.3646.1300.2.2.1.16.1.2
Current power management mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER manual(0), automatic(1)  

askeyADSLLinePwrMgtState 1.3.6.1.4.1.3646.1300.2.2.1.16.1.3
Current power management state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pwrMgtStateL0(0), pwrMgtStateL2(1), pwrMgtStateL3ByCO(2), pwrMgtStateL3ByCPE(3)  

askeyADSLLinePwrMgtTransManual 1.3.6.1.4.1.3646.1300.2.2.1.16.1.4
Try to transit immediately into power management L0, L2, or L3 by manual.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER transToL0(0), transToL2(1), transToL3(2)  

askeyADSLLineAtucCurrINP 1.3.6.1.4.1.3646.1300.2.2.1.16.1.5
This line ATU-C(down stream) current INP(Impulse Noise Protected) value. This value is 0.01 symbol times.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

askeyADSLLineAturCurrINP 1.3.6.1.4.1.3646.1300.2.2.1.16.1.6
This line ATU-R(up stream) current INP(Impulse Noise Protected) value. This value is 0.01 symbol times.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

remoteAskeyCPE 1.3.6.1.4.1.3646.1300.2.2.1.17
OBJECT IDENTIFIER    

askeyCPEWirelessTable 1.3.6.1.4.1.3646.1300.2.2.1.17.2
A table indicates remote CPE wireless objects for each line.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AskeyCPEWirelessEntry

askeyCPEWirelessEntry 1.3.6.1.4.1.3646.1300.2.2.1.17.2.1
Remote CPE wireless objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  AskeyCPEWirelessEntry  

askeyCPEWirelessAdminState 1.3.6.1.4.1.3646.1300.2.2.1.17.2.1.1
Remote CPE wireless administrative state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

askeyCPEWirelessOperState 1.3.6.1.4.1.3646.1300.2.2.1.17.2.1.2
Remote CPE wireless operational state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

askeyADSLCardFilterTable 1.3.6.1.4.1.3646.1300.2.2.1.18
This table is a ADSL card(slot) filter status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AskeyADSLCardFilterEntry

askeyADSLCardFilterEntry 1.3.6.1.4.1.3646.1300.2.2.1.18.1
The entry indicates ADSL card filter status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AskeyADSLCardFilterEntry  

dsBroadcastFilterVLANID 1.3.6.1.4.1.3646.1300.2.2.1.18.1.1
The object indicates the VLAN ID configuration for down stream broadcast filters on the specifed ADSL card.
Status: current Access: read-only
OBJECT-TYPE    
  PortList