ASCEND-MIBSHDSLNET-MIB

File: ASCEND-MIBSHDSLNET-MIB.mib (20090 bytes)

Imported modules

ASCEND-MIB

RFC1155-SMI

RFC-1212

Imported symbols

configuration

IpAddress

OBJECT-TYPE

Defined Types

DisplayString
OCTET STRING

MibshdslNetworkProfileEntry
SEQUENCE
	shdslNetworkProfile-Shelf-o	INTEGER
	shdslNetworkProfile-Slot-o	INTEGER
	shdslNetworkProfile-Item-o	INTEGER
	shdslNetworkProfile-Name	DisplayString
	shdslNetworkProfile-PhysicalAddress-Shelf	INTEGER
	shdslNetworkProfile-PhysicalAddress-Slot	INTEGER
	shdslNetworkProfile-PhysicalAddress-ItemNumber	INTEGER
	shdslNetworkProfile-Enabled	INTEGER
	shdslNetworkProfile-SparingMode	INTEGER
	shdslNetworkProfile-IgnoreLineup	INTEGER
	shdslNetworkProfile-ProfileNumber	INTEGER
	shdslNetworkProfile-LineConfig-TrunkGroup	INTEGER
	shdslNetworkProfile-LineConfig-NailedGroup	INTEGER
	shdslNetworkProfile-LineConfig-VpSwitchingVpi	INTEGER
	shdslNetworkProfile-LineConfig-RoutePort-SlotNumber-SlotNumber	INTEGER
	shdslNetworkProfile-LineConfig-RoutePort-SlotNumber-ShelfNumber	INTEGER
	shdslNetworkProfile-LineConfig-RoutePort-RelativePortNumber-RelativePortNumber	INTEGER
	shdslNetworkProfile-LineConfig-Activation	INTEGER
	shdslNetworkProfile-LineConfig-CallRouteInfo-Shelf	INTEGER
	shdslNetworkProfile-LineConfig-CallRouteInfo-Slot	INTEGER
	shdslNetworkProfile-LineConfig-CallRouteInfo-ItemNumber	INTEGER
	shdslNetworkProfile-LineConfig-UnitType	INTEGER
	shdslNetworkProfile-LineConfig-NtrEnabled	INTEGER
	shdslNetworkProfile-LineConfig-ClockSource	INTEGER
	shdslNetworkProfile-LineConfig-ClockPriority	INTEGER
	shdslNetworkProfile-LineConfig-LoopBack	INTEGER
	shdslNetworkProfile-LineConfig-Margin	INTEGER
	shdslNetworkProfile-LineConfig-SnextMargin	INTEGER
	shdslNetworkProfile-LineConfig-RateMode	INTEGER
	shdslNetworkProfile-LineConfig-MinRate	INTEGER
	shdslNetworkProfile-LineConfig-MaxRate	INTEGER
	shdslNetworkProfile-LineConfig-GshdslStandardNetworkType	INTEGER
	shdslNetworkProfile-LineConfig-AnnexbAnfpEnabled	INTEGER
	shdslNetworkProfile-LineConfig-GshdslPsdType	INTEGER
	shdslNetworkProfile-LineConfig-MasterBindingPort	INTEGER
	shdslNetworkProfile-Action-o	INTEGER

Defined Values

mibshdslNetworkProfile		1.3.6.1.4.1.529.23.147
OBJECT IDENTIFIER

mibshdslNetworkProfileTable		1.3.6.1.4.1.529.23.147.1
A list of mibshdslNetworkProfile profile entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MibshdslNetworkProfileEntry

mibshdslNetworkProfileEntry		1.3.6.1.4.1.529.23.147.1.1
A mibshdslNetworkProfile entry containing objects that maps to the parameters of mibshdslNetworkProfile profile.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MibshdslNetworkProfileEntry

shdslNetworkProfile-Shelf-o		1.3.6.1.4.1.529.23.147.1.1.1
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

shdslNetworkProfile-Slot-o		1.3.6.1.4.1.529.23.147.1.1.2
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

shdslNetworkProfile-Item-o		1.3.6.1.4.1.529.23.147.1.1.3
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

shdslNetworkProfile-Name		1.3.6.1.4.1.529.23.147.1.1.4
For future use. The current design does not use the name field but instead references Shdsl lines by the physical address; we may in the future support referencing Shdsl lines by name as well as by address. The name consists of a null terminated ascii string supplied by the user; it defaults to the ascii form of the Shdsl line physical address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

shdslNetworkProfile-PhysicalAddress-Shelf		1.3.6.1.4.1.529.23.147.1.1.5
The number of the shelf that the addressed physical device resides on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)

shdslNetworkProfile-PhysicalAddress-Slot		1.3.6.1.4.1.529.23.147.1.1.6
The number of the slot that the addressed physical device resides on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)

shdslNetworkProfile-PhysicalAddress-ItemNumber		1.3.6.1.4.1.529.23.147.1.1.7
A number that specifies an addressable entity within the context of shelf and slot.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

shdslNetworkProfile-Enabled		1.3.6.1.4.1.529.23.147.1.1.8
TRUE if the line is enabled, otherwise FALSE.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

shdslNetworkProfile-SparingMode		1.3.6.1.4.1.529.23.147.1.1.9
Port sparing operational mode for this port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	inactive(1), manual(2), automatic(3)

shdslNetworkProfile-IgnoreLineup		1.3.6.1.4.1.529.23.147.1.1.10
Ignore line up value for this port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	systemDefined(1), no(2), yes(3)

shdslNetworkProfile-ProfileNumber		1.3.6.1.4.1.529.23.147.1.1.11
For potential backwards compatibility. The current design consists of one line profile numbered 0.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

shdslNetworkProfile-LineConfig-TrunkGroup		1.3.6.1.4.1.529.23.147.1.1.12
The trunk group to which this line is assigned. 0 means this line is not part of a trunk group.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

shdslNetworkProfile-LineConfig-NailedGroup		1.3.6.1.4.1.529.23.147.1.1.13
A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

shdslNetworkProfile-LineConfig-VpSwitchingVpi		1.3.6.1.4.1.529.23.147.1.1.14
The Vpi to be used for the VP switching. Rest of the valid VPIs in valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

shdslNetworkProfile-LineConfig-RoutePort-SlotNumber-SlotNumber		1.3.6.1.4.1.529.23.147.1.1.15
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

shdslNetworkProfile-LineConfig-RoutePort-SlotNumber-ShelfNumber		1.3.6.1.4.1.529.23.147.1.1.16
TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed when a slot number is needed.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

shdslNetworkProfile-LineConfig-RoutePort-RelativePortNumber-RelativePortNumber		1.3.6.1.4.1.529.23.147.1.1.17
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

shdslNetworkProfile-LineConfig-Activation		1.3.6.1.4.1.529.23.147.1.1.18
Line activation mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	static(1), dsrActive(2), dcdDsrActive(3)

shdslNetworkProfile-LineConfig-CallRouteInfo-Shelf		1.3.6.1.4.1.529.23.147.1.1.19
The number of the shelf that the addressed physical device resides on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)

shdslNetworkProfile-LineConfig-CallRouteInfo-Slot		1.3.6.1.4.1.529.23.147.1.1.20
The number of the slot that the addressed physical device resides on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)

shdslNetworkProfile-LineConfig-CallRouteInfo-ItemNumber		1.3.6.1.4.1.529.23.147.1.1.21
A number that specifies an addressable entity within the context of shelf and slot.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

shdslNetworkProfile-LineConfig-UnitType		1.3.6.1.4.1.529.23.147.1.1.22
The Unit Type defines if a line is acting as either a Central Office (COE) or Customer Premise Equipment (CPE). Note that the remote unit needs to be configured opposite to this configureation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	coe(1), cpe(2)

shdslNetworkProfile-LineConfig-NtrEnabled		1.3.6.1.4.1.529.23.147.1.1.23
TRUE if NTR functionality is enabled, otherwise FALSE. If the unit-type is COE, it will take the system clock as the input when NTR is enabled and allow the remote CPE port to recover the clock. If the unit-type is CPE, it will allow the port to possibly output the recovered clock as the system clock (if elected, see clock-source and clock-priority fields) when NTR is enabled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

shdslNetworkProfile-LineConfig-ClockSource		1.3.6.1.4.1.529.23.147.1.1.24
Determine whether the 8KHz clock from the SHDSL line (unit-type has to be CPE and ntr-enabled has to be yes) is eligible to be used as the 8KHz system clock source.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	eligible(1), notEligible(2)

shdslNetworkProfile-LineConfig-ClockPriority		1.3.6.1.4.1.529.23.147.1.1.25
Clock priority assigned to the SHDSL line. Used to select a particular SHDSL line as the 8KHz system clock source.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	highPriority(2), middlePriority(3), lowPriority(4)

shdslNetworkProfile-LineConfig-LoopBack		1.3.6.1.4.1.529.23.147.1.1.26
Configuration of different modem loopbacks.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), analog(2), digital(3)

shdslNetworkProfile-LineConfig-Margin		1.3.6.1.4.1.529.23.147.1.1.27
Selects a margin range between the signal to noise floor.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	n-0db(1), n-1db(2), n-2db(3), n-3db(4), n-4db(5), n-5db(6), n-6db(7), n-7db(8), n-8db(9), n-9db(10), n-10db(11), disable(17)

shdslNetworkProfile-LineConfig-SnextMargin		1.3.6.1.4.1.529.23.147.1.1.34
Selects a Snext margin range with a worst-case self next noise model given current loop insertion loss.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	n-0db(1), n-1db(2), n-2db(3), n-3db(4), n-4db(5), n-5db(6), n-6db(7), n-7db(8), n-8db(9), n-9db(10), n-10db(11), n-plus-10db(12), n-plus-9db(13), n-plus-8db(14), n-plus-7db(15), n-plus-6db(16), n-plus-5db(17), n-plus-4db(18), n-plus-3db(19), n-plus-2db(20), n-plus-1db(21), disable(22)

shdslNetworkProfile-LineConfig-RateMode		1.3.6.1.4.1.529.23.147.1.1.28
Used for G.SHDSL technology. Selects if the modem operates in Fixed or Auto rate mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	fixed(1), auto(2)

shdslNetworkProfile-LineConfig-MinRate		1.3.6.1.4.1.529.23.147.1.1.29
Used for G.SHDSL technology. When the rate-mode is set to Auto, this is the minimum rate the modem will train to.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	n-72000(72001), n-136000(136001), n-200000(200001), n-264000(264001), n-328000(328001), n-392000(392001), n-520000(520001), n-776000(776001), n-1032000(1032001), n-1160000(1160001), n-1288000(1288001), n-1544000(1544001), n-2056000(2056001), n-2312000(2312001)

shdslNetworkProfile-LineConfig-MaxRate		1.3.6.1.4.1.529.23.147.1.1.30
Used for G.SHDSL technology. When the rate-mode is set to Auto, this is the maximum rate the modem will train to. When the rate-mode is set to Fixed, this is the only rate the mode trains to.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	n-72000(72001), n-136000(136001), n-200000(200001), n-264000(264001), n-328000(328001), n-392000(392001), n-520000(520001), n-776000(776001), n-1032000(1032001), n-1160000(1160001), n-1288000(1288001), n-1544000(1544001), n-2056000(2056001), n-2312000(2312001)

shdslNetworkProfile-LineConfig-GshdslStandardNetworkType		1.3.6.1.4.1.529.23.147.1.1.31
Per the G.SHDSL Standard G.991.2. This parameter allows selection for the modem to operate either the North American Annex 'A' or European Annex 'B' standard network types. The setting of auto-detect is only valid for CPE to train off of COE Standard Network settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	northAmericanAnnexA(1), europeanAnnexB(2), autoDetect(3)

shdslNetworkProfile-LineConfig-AnnexbAnfpEnabled		1.3.6.1.4.1.529.23.147.1.1.35
TRUE if Annex B ANFP functionality is enabled, otherwise FALSE. The gshdsl-standard-network-type must be set to European Annex B, and the port cannot be CPE. This field makes the modem perform in Annex B mode, but slightly differently. This is to comply with the UK ANFP requirements and pass the BTexact Technologies PSD measurement technique to meet BT approval. Only enable this field for that test specifically.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

shdslNetworkProfile-LineConfig-GshdslPsdType		1.3.6.1.4.1.529.23.147.1.1.32
Per the G.SHDSL Standard G.911.2. This parameter allows selection for the modem to output a symmetric PSD at all rates or asymmetric PSD's at fixed rates of 776kbps or 1544kbps, for Annex A networks. Annex B networks support fixed rates of 2056kbps or 2304kbps. The setting of auto-detect is only valid for CPE to train off of COE PSD settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	symmetric(1), asymmetric776kPsdAnnexA(4), asymmetric1544kPsdAnnexA(5), asymmetric2056kPsdAnnexB(6), asymmetric2312kPsdAnnexB(7), autoDetect(8)

shdslNetworkProfile-LineConfig-MasterBindingPort		1.3.6.1.4.1.529.23.147.1.1.36
This parameter defines if a port is used as a master or slave for port binding purposes. Only odd ports are configured masters for the binding feature. When the master is enabled, the master port will be bound with the next even port number. Binding two SHDSL ports together will aggregate their bandwidths together. This does not apply to HDSL2 modem technology. Other line configuration rules: 1) Port rate mode needs to be Fixed. 2) The master ports max-rate and rate-mode are used for both ports. 3) Both ports need to be enabled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

shdslNetworkProfile-Action-o		1.3.6.1.4.1.529.23.147.1.1.33
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	noAction(1), createProfile(2), deleteProfile(3)