ASCEND-MIBINTEGRITY-MIB

File: ASCEND-MIBINTEGRITY-MIB.mib (7703 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

MibsystemIntegrityProfileEntry  
SEQUENCE    
  systemIntegrityProfile-Index-o INTEGER
  systemIntegrityProfile-EnableCentralizedDetection INTEGER
  systemIntegrityProfile-RatioCentralizedDetection INTEGER
  systemIntegrityProfile-Action-o INTEGER

MibsystemIntegrityProfile-IntegrityConfigEntry  
SEQUENCE    
  systemIntegrityProfile-IntegrityConfig-Index-o INTEGER
  systemIntegrityProfile-IntegrityConfig-Index1-o INTEGER
  systemIntegrityProfile-IntegrityConfig-EnableContinuousDetection INTEGER
  systemIntegrityProfile-IntegrityConfig-DetectionInterval INTEGER
  systemIntegrityProfile-IntegrityConfig-OnlyOneCorrection INTEGER
  systemIntegrityProfile-IntegrityConfig-CorrectionFactor INTEGER
  systemIntegrityProfile-IntegrityConfig-AutoCorrectionEnable INTEGER
  systemIntegrityProfile-IntegrityConfig-IntervalAutoCorrection INTEGER

Defined Values

mibsystemIntegrityProfile 1.3.6.1.4.1.529.23.81
OBJECT IDENTIFIER    

mibsystemIntegrityProfileTable 1.3.6.1.4.1.529.23.81.1
A list of mibsystemIntegrityProfile profile entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MibsystemIntegrityProfileEntry

mibsystemIntegrityProfileEntry 1.3.6.1.4.1.529.23.81.1.1
A mibsystemIntegrityProfile entry containing objects that maps to the parameters of mibsystemIntegrityProfile profile.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MibsystemIntegrityProfileEntry  

systemIntegrityProfile-Index-o 1.3.6.1.4.1.529.23.81.1.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemIntegrityProfile-EnableCentralizedDetection 1.3.6.1.4.1.529.23.81.1.1.2
Master can also do cetralized integrity for the whole system on the top of all cards doing their own distributed integrity testing. The recommended value is no. By default all LIMs do correction every few hours and that should be enough for LIMs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

systemIntegrityProfile-RatioCentralizedDetection 1.3.6.1.4.1.529.23.81.1.1.3
If centralized detection is enabled then the ratio of problem detection between the Master and all other cards. For example if ratio is 5 then master CM would do 5 self tests before triggering centralized LIM test.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

systemIntegrityProfile-Action-o 1.3.6.1.4.1.529.23.81.1.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

mibsystemIntegrityProfile-IntegrityConfigTable 1.3.6.1.4.1.529.23.81.2
A list of mibsystemIntegrityProfile__integrity_config profile entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MibsystemIntegrityProfile-IntegrityConfigEntry

mibsystemIntegrityProfile-IntegrityConfigEntry 1.3.6.1.4.1.529.23.81.2.1
A mibsystemIntegrityProfile__integrity_config entry containing objects that maps to the parameters of mibsystemIntegrityProfile__integrity_config profile.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MibsystemIntegrityProfile-IntegrityConfigEntry  

systemIntegrityProfile-IntegrityConfig-Index-o 1.3.6.1.4.1.529.23.81.2.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemIntegrityProfile-IntegrityConfig-Index1-o 1.3.6.1.4.1.529.23.81.2.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemIntegrityProfile-IntegrityConfig-EnableContinuousDetection 1.3.6.1.4.1.529.23.81.2.1.3
MAGIC testing, detection and correction enabled in continous mode? It is recommended yes for the CMs and no for all LIMs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

systemIntegrityProfile-IntegrityConfig-DetectionInterval 1.3.6.1.4.1.529.23.81.2.1.4
Detection interval in miliseconds for continuous detection. The system tries to detect any abnormality at defined miliseconds interval. The recommended value is 100 ms for CMs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

systemIntegrityProfile-IntegrityConfig-OnlyOneCorrection 1.3.6.1.4.1.529.23.81.2.1.5
If yes then apply MAGIC correction only once. If no then apply MAGIC correction multiple times in a row. Only one correction is recommended.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

systemIntegrityProfile-IntegrityConfig-CorrectionFactor 1.3.6.1.4.1.529.23.81.2.1.6
MAGIC correction factor. How many detection of problems result in to a correction. The system keeps history of past 20 tests. If correction-factor is 1 then only one failure out of past 20 tests would result in a correction. If correction-factor is 5 then 5 failure out of 20 would result in a correction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

systemIntegrityProfile-IntegrityConfig-AutoCorrectionEnable 1.3.6.1.4.1.529.23.81.2.1.7
If auto correction is enabled for this card or not. Applicable only for LIM cards. LIM tries to correct problem every few hours automatically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

systemIntegrityProfile-IntegrityConfig-IntervalAutoCorrection 1.3.6.1.4.1.529.23.81.2.1.8
All slot cards (LIM) automatically tries to correct themselves at specified interval in mili seconds. Some LIMs are capable of doing detection before correction. Those LIMs would try to detect the problem and then correct it.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER