ASCEND-MIBATMIF-MIB

File: ASCEND-MIBATMIF-MIB.mib (22626 bytes)

Imported modules

ASCEND-MIB

RFC1155-SMI

RFC-1212

Imported symbols

configuration

IpAddress

OBJECT-TYPE

Defined Types

DisplayString
OCTET STRING

MibatmInterfaceProfileEntry
SEQUENCE
	atmInterfaceProfile-Shelf-o	INTEGER
	atmInterfaceProfile-Slot-o	INTEGER
	atmInterfaceProfile-Item-o	INTEGER
	atmInterfaceProfile-LogicalItem-o	INTEGER
	atmInterfaceProfile-InterfaceAddress-PhysicalAddress-Shelf	INTEGER
	atmInterfaceProfile-InterfaceAddress-PhysicalAddress-Slot	INTEGER
	atmInterfaceProfile-InterfaceAddress-PhysicalAddress-ItemNumber	INTEGER
	atmInterfaceProfile-InterfaceAddress-LogicalItem	INTEGER
	atmInterfaceProfile-Name	DisplayString
	atmInterfaceProfile-SvcOptions-Enabled	INTEGER
	atmInterfaceProfile-SvcOptions-AtmProtocol	INTEGER
	atmInterfaceProfile-SvcOptions-AtmAddress-NumberingPlan	INTEGER
	atmInterfaceProfile-SvcOptions-AtmAddress-E164NativeAddress	DisplayString
	atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-Format	INTEGER
	atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-IdpPortion-Afi	DisplayString
	atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-IdpPortion-Idi	DisplayString
	atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-DspPortion-HoDsp	DisplayString
	atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-DspPortion-Esi	DisplayString
	atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-DspPortion-Sel	DisplayString
	atmInterfaceProfile-SvcOptions-InsertCallingPartyAddr	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-MaxRestart	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-MaxStatenq	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T301Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T303Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T306Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T308Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T309Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T310Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T313Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T316Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T317Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T322Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T331Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T333Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T397Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T398Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T399Ms	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-SaalRetryMs	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T303NumReties	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T308NumRetries	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T316NumRetries	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T322NumRetries	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-T331NumRetries	INTEGER
	atmInterfaceProfile-SvcOptions-Q93bOptions-AssignVpiVci	INTEGER
	atmInterfaceProfile-SvcOptions-QsaalOptions-WindowSize	INTEGER
	atmInterfaceProfile-SvcOptions-QsaalOptions-MaxCc	INTEGER
	atmInterfaceProfile-SvcOptions-QsaalOptions-MaxPd	INTEGER
	atmInterfaceProfile-SvcOptions-QsaalOptions-MaxStat	INTEGER
	atmInterfaceProfile-SvcOptions-QsaalOptions-TccMs	INTEGER
	atmInterfaceProfile-SvcOptions-QsaalOptions-TpollMs	INTEGER
	atmInterfaceProfile-SvcOptions-QsaalOptions-TkeepaliveMs	INTEGER
	atmInterfaceProfile-SvcOptions-QsaalOptions-TnoresponseMs	INTEGER
	atmInterfaceProfile-SvcOptions-QsaalOptions-TidleMs	INTEGER
	atmInterfaceProfile-SvcOptions-QsaalOptions-PollAfterRetransmission	INTEGER
	atmInterfaceProfile-SvcOptions-QsaalOptions-RepeatUstat	INTEGER
	atmInterfaceProfile-SvcOptions-QsaalOptions-UstatRspToPoll	INTEGER
	atmInterfaceProfile-Action-o	INTEGER

Defined Values

mibatmInterfaceProfile		1.3.6.1.4.1.529.23.40
OBJECT IDENTIFIER

mibatmInterfaceProfileTable		1.3.6.1.4.1.529.23.40.1
A list of mibatmInterfaceProfile profile entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MibatmInterfaceProfileEntry

mibatmInterfaceProfileEntry		1.3.6.1.4.1.529.23.40.1.1
A mibatmInterfaceProfile entry containing objects that maps to the parameters of mibatmInterfaceProfile profile.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MibatmInterfaceProfileEntry

atmInterfaceProfile-Shelf-o		1.3.6.1.4.1.529.23.40.1.1.1
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-Slot-o		1.3.6.1.4.1.529.23.40.1.1.2
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-Item-o		1.3.6.1.4.1.529.23.40.1.1.3
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-LogicalItem-o		1.3.6.1.4.1.529.23.40.1.1.4
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-InterfaceAddress-PhysicalAddress-Shelf		1.3.6.1.4.1.529.23.40.1.1.5
The number of the shelf that the addressed physical device resides on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)

atmInterfaceProfile-InterfaceAddress-PhysicalAddress-Slot		1.3.6.1.4.1.529.23.40.1.1.6
The number of the slot that the addressed physical device resides on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)

atmInterfaceProfile-InterfaceAddress-PhysicalAddress-ItemNumber		1.3.6.1.4.1.529.23.40.1.1.7
A number that specifies an addressable entity within the context of shelf and slot.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-InterfaceAddress-LogicalItem		1.3.6.1.4.1.529.23.40.1.1.8
A number that specifies an addressable logical entity within the context of a physical address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-Name		1.3.6.1.4.1.529.23.40.1.1.9
Name of ATM Interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atmInterfaceProfile-SvcOptions-Enabled		1.3.6.1.4.1.529.23.40.1.1.10
SVC signalling (Q.93b) is enabled on this link.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

atmInterfaceProfile-SvcOptions-AtmProtocol		1.3.6.1.4.1.529.23.40.1.1.11
ATM protocol on this link.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	uni30(2), uni31(3)

atmInterfaceProfile-SvcOptions-AtmAddress-NumberingPlan		1.3.6.1.4.1.529.23.40.1.1.12
Numbering plan for an SVC address
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	undefined(1), isdn(2), aesa(3), unknown(5), x121(9)

atmInterfaceProfile-SvcOptions-AtmAddress-E164NativeAddress		1.3.6.1.4.1.529.23.40.1.1.13
An SVC address in a native E.164 format.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-Format		1.3.6.1.4.1.529.23.40.1.1.14
An AESA address format used to define this SVC address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	undefined(1), dccAesa(2), icdAesa(6), e164Aesa(4), customAesa(5)

atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-IdpPortion-Afi		1.3.6.1.4.1.529.23.40.1.1.15
An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-IdpPortion-Idi		1.3.6.1.4.1.529.23.40.1.1.16
An Initial Domain Identifier (IDI) portion of the AESA address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-DspPortion-HoDsp		1.3.6.1.4.1.529.23.40.1.1.17
A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-DspPortion-Esi		1.3.6.1.4.1.529.23.40.1.1.18
An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atmInterfaceProfile-SvcOptions-AtmAddress-AesaAddress-DspPortion-Sel		1.3.6.1.4.1.529.23.40.1.1.19
A selector (SEL) field that may be used by the end system.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atmInterfaceProfile-SvcOptions-InsertCallingPartyAddr		1.3.6.1.4.1.529.23.40.1.1.20
Insert ATM address of this interface in calling party address IE during call setup.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

atmInterfaceProfile-SvcOptions-Q93bOptions-MaxRestart		1.3.6.1.4.1.529.23.40.1.1.21
Maximum number of unacknowledged tx RESTART.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-MaxStatenq		1.3.6.1.4.1.529.23.40.1.1.22
Maximum number of unacknowledged tx STATUS ENQ.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T301Ms		1.3.6.1.4.1.529.23.40.1.1.23
Timer (in msec) for alerting supervision function. This timer is started on receipt of ALERT in Call received/delivered state and stopped when CONNECT is received.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T303Ms		1.3.6.1.4.1.529.23.40.1.1.24
Timer (in msec) for a response after SETUP is sent. This timer is stopped when the CONNECT, CALL PROCEEDING, or RELEASE COMPLETE is received.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T306Ms		1.3.6.1.4.1.529.23.40.1.1.25
Timer (in msec) for a RELEASE_COMPLETE to be received after a release has been sent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T308Ms		1.3.6.1.4.1.529.23.40.1.1.26
Timer (in msec) for a response after RELEASE is sent. This is a release indication timer. This timer is started when the RELEASE message is sent and normally is stopped when the RELEASE or RELEASE COMPLETE is received.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T309Ms		1.3.6.1.4.1.529.23.40.1.1.27
Timer (in msec) for Q.SAAL to reconnect. After this time, calls are dropped. When set to 0, a default value based on an ATM signaling protocol will be used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T310Ms		1.3.6.1.4.1.529.23.40.1.1.28
Timer (in msec) for a response after SETUP is received. Also called the CALL PROCEEDING timer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T313Ms		1.3.6.1.4.1.529.23.40.1.1.29
Timer (in msec) for a response after CONNECT is sent. Also called the connect request timer. It is started when the CONNECT is sent and stopped when the CONNECT ACKNOWLEDGE is recieved.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T316Ms		1.3.6.1.4.1.529.23.40.1.1.30
Timer (in msec) for a response after RESTART is sent. Also called the restart request timer. It is started when the RESTART is sent and stopped when the RESTART ACKNOWLEDGE is recieved.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T317Ms		1.3.6.1.4.1.529.23.40.1.1.31
Timer (in msec) for internal clearing of call references. This timer is started as a result of a restart and cleared when all the internal call references are cleared. Should be less than the the likely value of T316 of the peer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T322Ms		1.3.6.1.4.1.529.23.40.1.1.32
Timer (in msec) for a response after STATUS ENQ is sent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T331Ms		1.3.6.1.4.1.529.23.40.1.1.33
Timer (in msec) for internal clearing of call references.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T333Ms		1.3.6.1.4.1.529.23.40.1.1.34
Timer (in msec) for internal clearing of call references.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T397Ms		1.3.6.1.4.1.529.23.40.1.1.35
Timer (in msec) for internal clearing of call references.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T398Ms		1.3.6.1.4.1.529.23.40.1.1.36
Timer (in msec) for receipt of a response to a DROP PARTY that was sent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T399Ms		1.3.6.1.4.1.529.23.40.1.1.37
Timer (in msec) for receipt of a response to an ADD PARTY that was sent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-SaalRetryMs		1.3.6.1.4.1.529.23.40.1.1.38
Timer value for retrying AAL_ESTABLISH messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T303NumReties		1.3.6.1.4.1.529.23.40.1.1.39
Number of times SETUP could be resent in case of T303 timer expiry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T308NumRetries		1.3.6.1.4.1.529.23.40.1.1.40
Number of times RELEASE could be sent in case of T308 timer expiry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T316NumRetries		1.3.6.1.4.1.529.23.40.1.1.41
Number of times RESTART could be sent in case RESTART ACK is not received withinn T316 timer expiry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T322NumRetries		1.3.6.1.4.1.529.23.40.1.1.42
Number of times STAT ENQ could be sent before a response is received within the T322 timer expiry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-T331NumRetries		1.3.6.1.4.1.529.23.40.1.1.43
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-Q93bOptions-AssignVpiVci		1.3.6.1.4.1.529.23.40.1.1.44
In the case of UNI4.0 and PNNI this parameter specifies who assigns the VPI/VCI. TRUE will allow the local stack and FALSE will let the partner stack to assign.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

atmInterfaceProfile-SvcOptions-QsaalOptions-WindowSize		1.3.6.1.4.1.529.23.40.1.1.45
Q.SAAL window size
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-QsaalOptions-MaxCc		1.3.6.1.4.1.529.23.40.1.1.46
Maximum number of control PDU (BGN, END, RESYNC) retransmissions.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-QsaalOptions-MaxPd		1.3.6.1.4.1.529.23.40.1.1.47
Maximum number of Sequenced data PDU's between poll.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-QsaalOptions-MaxStat		1.3.6.1.4.1.529.23.40.1.1.48
Maximum length of STAT PDU.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-QsaalOptions-TccMs		1.3.6.1.4.1.529.23.40.1.1.49
Retry time (in msec) for control PDU's(BGN, END, RESYNC).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-QsaalOptions-TpollMs		1.3.6.1.4.1.529.23.40.1.1.50
Poll sent (in msec) when active. When set to 0, a default value based on an ATM signaling protocol will be used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-QsaalOptions-TkeepaliveMs		1.3.6.1.4.1.529.23.40.1.1.51
Poll sent (in msec) when in transient state. When set to 0, a default value based on an ATM signaling protocol will be used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-QsaalOptions-TnoresponseMs		1.3.6.1.4.1.529.23.40.1.1.52
STAT received at least this period(in msec). When set to 0, a default value based on an ATM signaling protocol will be used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-QsaalOptions-TidleMs		1.3.6.1.4.1.529.23.40.1.1.53
Poll sent (in msec) when idle -- UNI 3.1, only.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmInterfaceProfile-SvcOptions-QsaalOptions-PollAfterRetransmission		1.3.6.1.4.1.529.23.40.1.1.54
Specifies after retransmitting PDUs whether a POLL must be sent before sending any further PDUs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

atmInterfaceProfile-SvcOptions-QsaalOptions-RepeatUstat		1.3.6.1.4.1.529.23.40.1.1.55
Specifies whether two USTAT messages should be sent each time it is required to be sent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

atmInterfaceProfile-SvcOptions-QsaalOptions-UstatRspToPoll		1.3.6.1.4.1.529.23.40.1.1.56
Specifies whether a USTAT should be sent in response to a POLL indicating an out of sequence PDU.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

atmInterfaceProfile-Action-o		1.3.6.1.4.1.529.23.40.1.1.57
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	noAction(1), createProfile(2), deleteProfile(3)