ASCEND-ADSL-DMT-MIB

File: ASCEND-ADSL-DMT-MIB.mib (14736 bytes)

Imported modules

ASCEND-WAN-MIB RFC-1212

Imported symbols

wanTypeAdslDmt OBJECT-TYPE

Defined Types

AdslDmtLineStatusEntry  
SEQUENCE    
  adslDmtStatusIfEntryIndex INTEGER
  adslDmtStatusShelfIndex INTEGER
  adslDmtStatusSlotIndex INTEGER
  adslDmtStatusLineIndex INTEGER
  adslDmtStatusUnitType INTEGER
  adslDmtStatusUpRate INTEGER
  adslDmtStatusDownRate INTEGER
  adslDmtStatusVendorId INTEGER
  adslDmtStatusFirmWareVer INTEGER
  adslDmtStatusHardWareVer INTEGER
  adslDmtStatusTrellis INTEGER
  adslDmtStatusEoc INTEGER

AdslAtucDMTPhysEntry  
SEQUENCE    
  adslAtucDMTIfEntryIndex INTEGER
  adslAtucDMTShelfIndex INTEGER
  adslAtucDMTSlotIndex INTEGER
  adslAtucDMTLineIndex INTEGER
  adslAtucDMTIssue INTEGER
  adslAtucDMTState INTEGER
  adslAtucDMTInterleavePath INTEGER
  adslAtucDMTFastPath INTEGER

AdslAturDMTPhysEntry  
SEQUENCE    
  adslAturDMTIfEntryIndex INTEGER
  adslAturDMTShelfIndex INTEGER
  adslAturDMTSlotIndex INTEGER
  adslAturDMTLineIndex INTEGER
  adslAturDMTIssue INTEGER
  adslAturDMTState INTEGER
  adslAturDMTInterleavePath INTEGER
  adslAturDMTFastPath INTEGER

AdslDmtLineStatisticEntry  
SEQUENCE    
  adslDmtStatIfEntryIndex INTEGER
  adslDmtStatShelfIndex INTEGER
  adslDmtStatSlotIndex INTEGER
  adslDmtStatLineIndex INTEGER
  adslDmtStatConnUpDays INTEGER
  adslDmtStatConnUpHours INTEGER
  adslDmtStatConnUpMinutes INTEGER
  adslDmtStatRxSignalPresent INTEGER
  adslDmtStatUpDwnCntr INTEGER
  adslDmtStatLineSelfTest INTEGER

Defined Values

adslDmtLineStatusTable 1.3.6.1.4.1.529.4.10.1
ADSL DMT status parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdslDmtLineStatusEntry

adslDmtLineStatusEntry 1.3.6.1.4.1.529.4.10.1.1
An interface status entry containing objects to describe the interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdslDmtLineStatusEntry  

adslDmtStatusIfEntryIndex 1.3.6.1.4.1.529.4.10.1.1.1
Index into the Status Table via the interface group ifIndex value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

adslDmtStatusShelfIndex 1.3.6.1.4.1.529.4.10.1.1.2
ADSL DMT module Shelf ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatusSlotIndex 1.3.6.1.4.1.529.4.10.1.1.3
ADSL DMT module Slot ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatusLineIndex 1.3.6.1.4.1.529.4.10.1.1.4
ADSL DMT module line ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatusUnitType 1.3.6.1.4.1.529.4.10.1.1.5
Unit type defines if the unit is operating either as a Central Office Equipment (COE) or Customer Premiss equipment (CPE).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER coe(1), cpe(2), other(3)  

adslDmtStatusUpRate 1.3.6.1.4.1.529.4.10.1.1.6
Display the current upstream (cpe to coe) rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatusDownRate 1.3.6.1.4.1.529.4.10.1.1.7
Displays the current downstream (coe to cpe) rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatusVendorId 1.3.6.1.4.1.529.4.10.1.1.8
Vendor identification.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatusFirmWareVer 1.3.6.1.4.1.529.4.10.1.1.9
Major firmware version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatusHardWareVer 1.3.6.1.4.1.529.4.10.1.1.10
Hardware version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatusTrellis 1.3.6.1.4.1.529.4.10.1.1.11
Report whether trellis coding is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), unknown(3)  

adslDmtStatusEoc 1.3.6.1.4.1.529.4.10.1.1.12
Report whether the eoc can support autonomous data streaming mode or only transaction mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), transaction(2), streaming(3)  

adslAtucDMTPhysTable 1.3.6.1.4.1.529.4.10.2
ADSL DMT status parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdslAtucDMTPhysEntry

adslAtucDMTPhysEntry 1.3.6.1.4.1.529.4.10.2.1
An interface status entry containing objects to describe the interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdslAtucDMTPhysEntry  

adslAtucDMTIfEntryIndex 1.3.6.1.4.1.529.4.10.2.1.1
Index into the Status Table via the interface group ifIndex value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

adslAtucDMTShelfIndex 1.3.6.1.4.1.529.4.10.2.1.2
ADSL DMT module Shelf ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslAtucDMTSlotIndex 1.3.6.1.4.1.529.4.10.2.1.3
ADSL DMT module Slot ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslAtucDMTLineIndex 1.3.6.1.4.1.529.4.10.2.1.4
ADSL DMT module line ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslAtucDMTIssue 1.3.6.1.4.1.529.4.10.2.1.5
Reports the issue number of the relevant standard that the DMT ADSL transceiver at the ATU-C is currently operating to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER t1-413-iss1(1), t1-413-iss2(2), t1-413-iss3(3), gdmt-iss1(4), etsi-iss1(5), other(6)  

adslAtucDMTState 1.3.6.1.4.1.529.4.10.2.1.6
Report current state of ATU-C DMT transceiver.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), power-up(2), configure(3), idle(4), quiet(5), tone(6), activating(7), training(8), analyzing(9), exchange(10), steady-state(11), not-responding(12)  

adslAtucDMTInterleavePath 1.3.6.1.4.1.529.4.10.2.1.7
Report bearer channel of downstream interleaved path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), as0(2), as1(3)  

adslAtucDMTFastPath 1.3.6.1.4.1.529.4.10.2.1.8
Report bearer channel of downstream fast path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), as0(2), as1(3)  

adslAturDMTPhysTable 1.3.6.1.4.1.529.4.10.3
ADSL DMT status parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdslAturDMTPhysEntry

adslAturDMTPhysEntry 1.3.6.1.4.1.529.4.10.3.1
An interface status entry containing objects to describe the interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdslAturDMTPhysEntry  

adslAturDMTIfEntryIndex 1.3.6.1.4.1.529.4.10.3.1.1
Index into the Status Table via the interface group ifIndex value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

adslAturDMTShelfIndex 1.3.6.1.4.1.529.4.10.3.1.2
ADSL DMT module Shelf ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslAturDMTSlotIndex 1.3.6.1.4.1.529.4.10.3.1.3
ADSL DMT module Slot ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslAturDMTLineIndex 1.3.6.1.4.1.529.4.10.3.1.4
ADSL DMT module line ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslAturDMTIssue 1.3.6.1.4.1.529.4.10.3.1.5
Reports the issue number of the relevant standard that the DMT ADSL transceiver at the ATU-C is currently operating to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER t1-413-iss1(1), t1-413-iss2(2), t1-413-iss3(3), gdmt-iss1(4), etsi-iss1(5), other(6)  

adslAturDMTState 1.3.6.1.4.1.529.4.10.3.1.6
Report current state of ATU-C DMT transceiver.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), activating(2), training(3), analyzing(4), exchange(5), steady-state(6), not-responding(7)  

adslAturDMTInterleavePath 1.3.6.1.4.1.529.4.10.3.1.7
Report bearer channel of upstream interleaved path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), ls0(2), ls1(3)  

adslAturDMTFastPath 1.3.6.1.4.1.529.4.10.3.1.8
Report bearer channel of upstream fast path.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), ls0(2), ls1(3)  

adslDmtLineStatisticTable 1.3.6.1.4.1.529.4.10.4
ADSL DMT statistical parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdslDmtLineStatisticEntry

adslDmtLineStatisticEntry 1.3.6.1.4.1.529.4.10.4.1
An interface statistical entry containing objects to describe the interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdslDmtLineStatisticEntry  

adslDmtStatIfEntryIndex 1.3.6.1.4.1.529.4.10.4.1.1
Index into the Status Table via the interface group ifIndex value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

adslDmtStatShelfIndex 1.3.6.1.4.1.529.4.10.4.1.2
ADSL DMT module Shelf ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatSlotIndex 1.3.6.1.4.1.529.4.10.4.1.3
ADSL DMT module Slot ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatLineIndex 1.3.6.1.4.1.529.4.10.4.1.4
ADSL DMT module interface ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatConnUpDays 1.3.6.1.4.1.529.4.10.4.1.5
Connection up day count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatConnUpHours 1.3.6.1.4.1.529.4.10.4.1.6
Connection Up 24 hour count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatConnUpMinutes 1.3.6.1.4.1.529.4.10.4.1.7
Connection up minute count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatRxSignalPresent 1.3.6.1.4.1.529.4.10.4.1.8
Receive signal present detection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

adslDmtStatUpDwnCntr 1.3.6.1.4.1.529.4.10.4.1.9
Line Up Down counter value displays the number of times the interface transitions from a down to up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adslDmtStatLineSelfTest 1.3.6.1.4.1.529.4.10.4.1.10
Line hardware self test results (Passed or Failed).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), failed(2), passed(3)