ARUBAWIRED-POWERSUPPLY-MIB

File: ARUBAWIRED-POWERSUPPLY-MIB.mib (9802 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
ARUBAWIRED-CHASSIS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
NOTIFICATION-TYPE MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP DisplayString arubaWiredChassisMIB

Defined Types

ArubaWiredPowerSupplyEntry  
SEQUENCE    
  arubaWiredPSUGroupIndex Integer32
  arubaWiredPSUSlotIndex Integer32
  arubaWiredPSUName DisplayString Size(0..20)
  arubaWiredPSUState DisplayString Size(0..20)
  arubaWiredPSUProductName DisplayString Size(0..20)
  arubaWiredPSUSerialNumber DisplayString Size(0..20)
  arubaWiredPSUInstantaneousPower Integer32
  arubaWiredPSUMaximumPower Integer32
  arubaWiredPSUNumberFailures Integer32
  arubaWiredPSUAirflowDirection DisplayString Size(0..20)

Defined Values

arubaWiredPowerSupply 1.3.6.1.4.1.47196.4.1.1.3.11.2
This MIB module describes management objects that manage Power Supply Units.
MODULE-IDENTITY    

arubaWiredPSUNotifications 1.3.6.1.4.1.47196.4.1.1.3.11.2.0
OBJECT IDENTIFIER    

arubaWiredPSUStateNotification 1.3.6.1.4.1.47196.4.1.1.3.11.2.0.1
A notification generated when a PSU state change occurs. This can happen if a PSU is powerd on, powerd off, inserted, removed, or exeriences a fault.
Status: current Access: read-only
NOTIFICATION-TYPE    

arubaWiredPowerSupplyTable 1.3.6.1.4.1.47196.4.1.1.3.11.2.1
This table contains one row per switch power supply entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArubaWiredPowerSupplyEntry

arubaWiredPowerSupplyEntry 1.3.6.1.4.1.47196.4.1.1.3.11.2.1.1
Information about the power supply physical entity table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ArubaWiredPowerSupplyEntry  

arubaWiredPSUGroupIndex 1.3.6.1.4.1.47196.4.1.1.3.11.2.1.1.1
This variable uniquely identifies the group containing the power supply. Group means chassis in the stack and the value 1 MUST be used for non-modular devices.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

arubaWiredPSUSlotIndex 1.3.6.1.4.1.47196.4.1.1.3.11.2.1.1.2
This variable uniquely identifies the power supply in a chassis and value 1 must be used for non-modular devices.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

arubaWiredPSUName 1.3.6.1.4.1.47196.4.1.1.3.11.2.1.1.3
Identification of the power supply for the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

arubaWiredPSUState 1.3.6.1.4.1.47196.4.1.1.3.11.2.1.1.4
Current status for the power supply.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

arubaWiredPSUProductName 1.3.6.1.4.1.47196.4.1.1.3.11.2.1.1.5
Power supply product name identification. This field is used to determine if the power supply is supported.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

arubaWiredPSUSerialNumber 1.3.6.1.4.1.47196.4.1.1.3.11.2.1.1.6
Power supply serial number to uniquely identify the power supply.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

arubaWiredPSUInstantaneousPower 1.3.6.1.4.1.47196.4.1.1.3.11.2.1.1.7
Total instantaneous power supplied by the power supply in Watts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredPSUMaximumPower 1.3.6.1.4.1.47196.4.1.1.3.11.2.1.1.8
Total maximum power capacity that can be supplied by the power supply in Watts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredPSUNumberFailures 1.3.6.1.4.1.47196.4.1.1.3.11.2.1.1.9
Number of failures the power supply has experienced since the most recent insertion of the power supply and boot of the system. The number of failures for a power supply will be cleared if the power supply is removed from the system or if the system is rebooted. For non removable power supplies, the number of failures will not clear until the system reboots. Failures are any events where power delivery from the power supply did not occur when expected. This includes unsupported power supply types since their power delivery is not considered valid even though the power supply itself may not have an internal failure. Some examples of failures are over current, invalid input power, and unsupported power supply type.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredPSUAirflowDirection 1.3.6.1.4.1.47196.4.1.1.3.11.2.1.1.10
Power Supply airflow direction.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

arubaWiredPowerSupplyConformance 1.3.6.1.4.1.47196.4.1.1.3.11.2.99
OBJECT IDENTIFIER    

arubaWiredPowerSupplyCompliances 1.3.6.1.4.1.47196.4.1.1.3.11.2.99.1
OBJECT IDENTIFIER    

arubaWiredPowerSupplyGroups 1.3.6.1.4.1.47196.4.1.1.3.11.2.99.2
OBJECT IDENTIFIER    

arubaWiredPowerSupplyCompliance 1.3.6.1.4.1.47196.4.1.1.3.11.2.99.1.1
A compliance statement for Aruba switch chassis.
Status: current Access: read-only
MODULE-COMPLIANCE    

arubaWiredPowerSupplyTableGroup 1.3.6.1.4.1.47196.4.1.1.3.11.2.99.2.1
A collection of objects display configuration, status, and measurements of Power Supply table.
Status: current Access: read-only
OBJECT-GROUP    

arubaWiredPSUNotificationsGroup 1.3.6.1.4.1.47196.4.1.1.3.11.2.99.2.2
Notifications sent by power management.
Status: current Access: read-only
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor