ARUBAWIRED-POE-MIB

File: ARUBAWIRED-POE-MIB.mib (37191 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF ARUBAWIRED-NETWORKING-OID
POWER-ETHERNET-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 MODULE-COMPLIANCE OBJECT-GROUP
wndFeatures pethPsePortEntry pethMainPseEntry

Defined Types

ArubaWiredPoePethPsePortEntry  
SEQUENCE    
  arubaWiredPoePethPsePortPowerAllocateBy INTEGER
  arubaWiredPoePethPsePortPreStdDetect INTEGER
  arubaWiredPoePethPsePortRpd INTEGER
  arubaWiredPoePethPsePortCurrent Integer32
  arubaWiredPoePethPsePortVoltage Integer32
  arubaWiredPoePethPsePortReservedPower Integer32
  arubaWiredPoePethPsePortPowerDrawn Integer32
  arubaWiredPoePethPsePortAveragePower Integer32
  arubaWiredPoePethPsePortPeakPower Integer32
  arubaWiredPoePethPsePortOperStatus INTEGER
  arubaWiredPoePethPsePortPdSignature INTEGER
  arubaWiredPoePethPsePortPowerClassification INTEGER
  arubaWiredPoePethPsePortPseAssignedClass INTEGER

ArubaWiredPoePethPseFourPairPortEntry  
SEQUENCE    
  arubaWiredPoePethPsePortDetectionStatusPairA INTEGER
  arubaWiredPoePethPsePortDetectionStatusPairB INTEGER
  arubaWiredPoePethPsePortPowerClassificationPairA INTEGER
  arubaWiredPoePethPsePortPowerClassificationPairB INTEGER
  arubaWiredPoePethPsePortPseAssignedClassA INTEGER
  arubaWiredPoePethPsePortPseAssignedClassB INTEGER
  arubaWiredPoePethPsePortInvalidSignatureCounterPairA Counter32
  arubaWiredPoePethPsePortInvalidSignatureCounterPairB Counter32
  arubaWiredPoePethPsePortPowerDeniedCounterPairA Counter32
  arubaWiredPoePethPsePortPowerDeniedCounterPairB Counter32
  arubaWiredPoePethPsePortOverLoadCounterPairA Counter32
  arubaWiredPoePethPsePortOverLoadCounterPairB Counter32
  arubaWiredPoePethPsePortMPSAbsentCounterPairA Counter32
  arubaWiredPoePethPsePortMPSAbsentCounterPairB Counter32

ArubaWiredPoePethMainPseEntry  
SEQUENCE    
  arubaWiredPoePethMainPseReservedPower Integer32
  arubaWiredPoePethMainPseFailoverPower Integer32
  arubaWiredPoePethMainPseRedundantPower Integer32

ArubaWiredPoePethPseModuleEntry  
SEQUENCE    
  arubaWiredPoePethPseModuleGroupIndex Integer32
  arubaWiredPoePethPseModuleSlotIndex Integer32
  arubaWiredPoePethPseModuleAlwaysOnPoe INTEGER

Defined Values

arubaWiredPoeMIB 1.3.6.1.4.1.47196.4.1.1.3.8
This MIB module describes management objects that manage Power Source Equipment (PSE). This is the MIB module related to HPE Aruba PoE
MODULE-IDENTITY    

arubaWiredPoePethPsePort 1.3.6.1.4.1.47196.4.1.1.3.8.1
OBJECT IDENTIFIER    

arubaWiredPoeConformance 1.3.6.1.4.1.47196.4.1.1.3.8.2
OBJECT IDENTIFIER    

arubaWiredPoePethMainPse 1.3.6.1.4.1.47196.4.1.1.3.8.3
OBJECT IDENTIFIER    

arubaWiredPoePethPseModule 1.3.6.1.4.1.47196.4.1.1.3.8.4
OBJECT IDENTIFIER    

arubaWiredPoePethPsePortTable 1.3.6.1.4.1.47196.4.1.1.3.8.1.1
A table of objects that display and control the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device. This group will be implemented in managed power Ethernet switches and mid-span devices. Values of all read-write objects in this table are persistent at restart/reboot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArubaWiredPoePethPsePortEntry

arubaWiredPoePethPsePortEntry 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1
The fields in these entries will be used to supplement fields in 'pethPsePortEntry in ieee802af.mib.
Status: current Access: not-accessible
OBJECT-TYPE    
  ArubaWiredPoePethPsePortEntry  

arubaWiredPoePethPsePortPowerAllocateBy 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.1
Allows control over the power allocation strategy used for this port. Two power allocation strategies are class(2) and usage(1). When allocating by usage(1) power is delivered as requested by a PD. When allocating by class(2) the PSE uses the power ramp-up signature of the PD to identify the PD's power class and use the power level for the specified class.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER usage(1), class(2)  

arubaWiredPoePethPsePortPreStdDetect 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.2
This field specifies the pre standard detect configuration for this port. A value of on - indicates that pre-802.3af-standard devices to power on. A value of off - indicates that only pre-802.3at/bt compliant devices are allowed. The default value is off.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

arubaWiredPoePethPsePortRpd 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.3
Rapid Power Down is executed by the hardware in the event of a power-supply failure. It quickly cuts power to a PD to prevent an over-current scenario in the PSE. This field indicates whether the interface will go down in the event of any PSU failure or not. A value of on(2) indicates that a power supply failure will cause the power delivery to be cut on supply failure. A value of off(1) indicates that the port is unaffected by the failure of any single PSU.The default value is off(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

arubaWiredPoePethPsePortCurrent 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.4
This field specifies the current supplied at this port. This value is specified in milliamperes(mA).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredPoePethPsePortVoltage 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.5
This field specifies the Voltage supplied at this port. This value is specified in 10's of Volts (dV).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredPoePethPsePortReservedPower 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.6
This field specifies quantum of power which has been reserved for the PD at this port. This value is specified in milliwatts (mW).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredPoePethPsePortPowerDrawn 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.7
This field specifies quantum of power which has indicating the actual power drawn by powered device(PD). This value is specified in milliwatts (mW).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredPoePethPsePortAveragePower 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.8
This field specifies the average power in milliwatts drawn by the powered device (PD) on this port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredPoePethPsePortPeakPower 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.9
This field specifies the peak power supplied in milliwatts to the powered device (PD) connected to this port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredPoePethPsePortOperStatus 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.10
This field specifies the operational status of the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER deny(1), off(2), on(3)  

arubaWiredPoePethPsePortPdSignature 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.11
This Signature value represents the PD signature. This variable is valid only while a PD is detected. In 802.3af and 802.3at standards the power controller on the PSE uses two of the four pairs of wires in the RJ45 connector to supply power to a power controller on the PD. With 802.3bt standard the controller on the PSE uses all four pairs. On the PD side there can either be single power controller, or two distinct power controllers connected to each of the two pairs and each of the two controllers would negotiate and draw power independently from the PSE. The Controller on the PSE is capable of detecting the PD signature, which will indicate whether the PD comprises a single controller or two independent controllers. Possible values: unknownSignature : 2-pair mode, singleSignature : 4-pair mode and one controller on the PD side, dualSignature : 4-pair mode and two controllers on the PD side.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknownSignature(0), singleSignature(1), dualSignature(2)  

arubaWiredPoePethPsePortPowerClassification 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.12
A read-only value that indicates the PD Class of a detected PD. Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute pethPsePortDetectionStatus is reporting the enumeration deliveringPower.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER class0(1), class1(2), class2(3), class3(4), class4(5), class5(6), class6(7), class7(8), class8(9)  

arubaWiredPoePethPsePortPseAssignedClass 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.13
This field indicates the actual class assigned by PSE to the PD. Class demotion allows the PSE to allocate less than the PD requested power based on the PD requested power and PSE available power. This information is published to the PD via the LLDP protocol. This read-only value indicates the PSE assigned class on this port. This variable is valid only while a PD is being powered, that is, while the attribute pethPsePortDetectionStatus is reporting the enumeration deliveringPower.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER class0(1), class1(2), class2(3), class3(4), class4(5), class5(6), class6(7)  

arubaWiredPoePethPseFourPairPortTable 1.3.6.1.4.1.47196.4.1.1.3.8.1.2
A table of objects that display and control the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device. This group will be implemented in managed power Ethernet switches and mid-span devices. Values of all read-write objects in this table are persistent at restart/reboot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArubaWiredPoePethPseFourPairPortEntry

arubaWiredPoePethPseFourPairPortEntry 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1
The fields in these entries will be used to supplement fields in 'pethPsePortEntry in ieee802af.mib.
Status: current Access: not-accessible
OBJECT-TYPE    
  ArubaWiredPoePethPseFourPairPortEntry  

arubaWiredPoePethPsePortDetectionStatusPairA 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.1
Describes the operational status of the port PD detection. A value of deliveringPowerAltA - indicates that the PSE State diagram is in the state POWER_ON_PRI if alt_pri='a', or the state POWER_ON_SEC if alt_pri='b'. A value of faultAltA - indicates that the PSE State diagram is in the state IDLE_PRI if alt_pri='a', or the state IDLE_SEC if alt_pri='b' due to the variable error_condition_pri = TRUE (if alt_pri='a') or error_condition_sec = TRUE (if alt_pri='b'). A value of searchingAltA - indicates the PSE State diagram is in a state other than those listed above.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER searchingAltA(1), deliveringPowerAltA(2), faultAltA(3)  

arubaWiredPoePethPsePortDetectionStatusPairB 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.2
Describes the operational status of the port PD detection. A value of deliveringPowerAltB - indicates that the PSE State diagram is in the state POWER_ON_SEC if alt_pri='a', or the state POWER_ON_PRI if alt_pri='b'. A value of faultAltB - indicates that the PSE State diagram is in the state IDLE_SEC if alt_pri='a', or the state IDLE_PRI if alt_pri='b' due to the variable error_condition_sec = TRUE (if alt_pri='a') or error_condition_pri = TRUE (if alt_pri='b'). A value of searchingAltB - indicates the PSE State diagram is in a state other than those listed above.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER searchingAltB(1), deliveringPowerAltB(2), faultAltB(3)  

arubaWiredPoePethPsePortPowerClassificationPairA 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.3
A read-only value that indicates the PD Class of a detected dual-signature PD on paira. Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered that is, while the attribute arubaWiredPoePethPsePortDetectionStatusPairA is reporting the enumeration deliveringPowerAltA.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER class1(1), class2(2), class3(3), class4(4), class5(5)  

arubaWiredPoePethPsePortPowerClassificationPairB 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.4
A read-only value that indicates the PD Class of a detected dual-signature PD on paira. Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute arubaWiredPoePethPsePortDetectionStatusPairB is reporting the enumeration deliveringPowerAltB.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER class1(1), class2(2), class3(3), class4(4), class5(5)  

arubaWiredPoePethPsePortPseAssignedClassA 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.5
This field indicates the actual class assigned by PSE to the PD. Class demotion allows the PSE to allocate less than the PD requested power based on the PD requested power and PSE available power. This information is published to the PD via the LLDP protocol. This read-only value indicates the PSE assigned class to PairA of this port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER class1(1), class2(2), class3(3), class4(4)  

arubaWiredPoePethPsePortPseAssignedClassB 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.6
This field indicates the actual class assigned by PSE to the PD. Class demotion allows the PSE to allocate less than the PD requested power based on the PD requested power and PSE available power. This information is published to the PD via the LLDP protocol. This read-only value indicates the PSE assigned class to PairA of this port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER class1(1), class2(2), class3(3), class4(4)  

arubaWiredPoePethPsePortInvalidSignatureCounterPairA 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.7
This counter is incremented when the PSE state diagram enters the state SIGNATURE_INVALID, if alt_pri='a'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arubaWiredPoePethPsePortInvalidSignatureCounterPairB 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.8
This counter is incremented when the PSE state diagram enters the state SIGNATURE_INVALID, if alt_pri='b'
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arubaWiredPoePethPsePortPowerDeniedCounterPairA 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.9
This counter is incremented when the PSE state diagram enters the state POWER_DENIED, if alt_pri='a'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arubaWiredPoePethPsePortPowerDeniedCounterPairB 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.10
This counter is incremented when the PSE state diagram enters the state POWER_DENIED, if alt_pri='b'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arubaWiredPoePethPsePortOverLoadCounterPairA 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.11
This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_OVER, if alt_pri='a'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arubaWiredPoePethPsePortOverLoadCounterPairB 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.12
This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_OVER, if alt_pri='b'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arubaWiredPoePethPsePortMPSAbsentCounterPairA 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.13
This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted, if alt_pri='a'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arubaWiredPoePethPsePortMPSAbsentCounterPairB 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.14
This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted, if alt_pri='b'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arubaWiredPoePethMainPseTable 1.3.6.1.4.1.47196.4.1.1.3.8.3.1
A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support these objects. Values of all read-write objects in this table are persistent at restart/reboot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArubaWiredPoePethMainPseEntry

arubaWiredPoePethMainPseEntry 1.3.6.1.4.1.47196.4.1.1.3.8.3.1.1
The fields in these entries will be used to supplement fields in 'pethMainPseEntry in ieee802af.mib.
Status: current Access: not-accessible
OBJECT-TYPE    
  ArubaWiredPoePethMainPseEntry  

arubaWiredPoePethMainPseReservedPower 1.3.6.1.4.1.47196.4.1.1.3.8.3.1.1.1
This field specifies the power in Watts, in the switch available for PoE power delivery. This power is available only for subsystems of type chassis, as power supplies are associated with chassis subsystem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredPoePethMainPseFailoverPower 1.3.6.1.4.1.47196.4.1.1.3.8.3.1.1.2
This field specifies the power in Watts, in the switch available for PoE power delivery when a single power supply failure happens. This power is available only for subsystems of type chassis, as power supplies are associated with chassis subsystem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredPoePethMainPseRedundantPower 1.3.6.1.4.1.47196.4.1.1.3.8.3.1.1.3
This field specifies power in Watts reserved by power supply based on power redundancy configurations. This power is available only for subsystems of type chassis, as power supplies are associated with chassis subsystem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredPoePethPseModuleTable 1.3.6.1.4.1.47196.4.1.1.3.8.4.1
A table of objects contains the AlwaysOnPoe status information on module.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArubaWiredPoePethPseModuleEntry

arubaWiredPoePethPseModuleEntry 1.3.6.1.4.1.47196.4.1.1.3.8.4.1.1
The fields in these entries will be used to display alwaysonpoe status information on specific module.
Status: current Access: not-accessible
OBJECT-TYPE    
  ArubaWiredPoePethPseModuleEntry  

arubaWiredPoePethPseModuleGroupIndex 1.3.6.1.4.1.47196.4.1.1.3.8.4.1.1.1
This variable uniquely identifies the group containing the module to which a power Ethernet PSE is connected. Group means box in the stack and the value 1 MUST be used for non-modular devices.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

arubaWiredPoePethPseModuleSlotIndex 1.3.6.1.4.1.47196.4.1.1.3.8.4.1.1.2
This variable uniquely identifies the module in a switch and value 1 must be used for non-modular devices.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

arubaWiredPoePethPseModuleAlwaysOnPoe 1.3.6.1.4.1.47196.4.1.1.3.8.4.1.1.3
Alwayson PoE is a feature that provides the ability for a switch to continue to provide power across a soft reboot. Value on(2) indicates Always-on PoE feature is enabled on the subsystem. Value off(1) indicates Alwayson PoE feature is disabled on the subsystem. This feature is applicable to subsystems of type chassis in non-modular switches, and to subsystems of type line-card in modular switches. This configuration is ignored on a non-PoE capable subsystems.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

arubaWiredPoeCompliances 1.3.6.1.4.1.47196.4.1.1.3.8.2.1
OBJECT IDENTIFIER    

arubaWiredPoeGroups 1.3.6.1.4.1.47196.4.1.1.3.8.2.2
OBJECT IDENTIFIER    

arubaWiredPoeCompliance 1.3.6.1.4.1.47196.4.1.1.3.8.2.1.1
A compliance statement for HP Routing switches with PoE capability.
Status: current Access: read-only
MODULE-COMPLIANCE    

arubaWiredPoePethPsePortTableGroup 1.3.6.1.4.1.47196.4.1.1.3.8.2.2.1
A collection of objects display configuration, status, PD information and mesurements of PoE PSE Port table.
Status: current Access: read-only
OBJECT-GROUP    

arubaWiredPoePethPseFourPairPortTableGroup 1.3.6.1.4.1.47196.4.1.1.3.8.2.2.2
A collection of objects display four pair paramentets of each pair PD information, status, and counters of PoE PSE Port table.
Status: current Access: read-only
OBJECT-GROUP    

arubaWiredPoePethMainPseTableGroup 1.3.6.1.4.1.47196.4.1.1.3.8.2.2.3
A Collection of Object(s) that provide information about each power source equipment instance.
Status: current Access: read-only
OBJECT-GROUP    

arubaWiredPoePethPseModuleTableGroup 1.3.6.1.4.1.47196.4.1.1.3.8.2.2.4
A Collection of Object(s) that provide AlwaysOnPoe information about each module on switch.
Status: current Access: read-only
OBJECT-GROUP