ARUBAWIRED-MCLAG-MIB

File: ARUBAWIRED-MCLAG-MIB.mib (18881 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB INET-ADDRESS-MIB ARUBAWIRED-NETWORKING-OID

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
TimeTicks DisplayString TruthValue
TEXTUAL-CONVENTION MODULE-COMPLIANCE OBJECT-GROUP
InterfaceIndex InetAddressType InetAddress
wndFeatures

Defined Types

VidList  
Each octet within this value specifies a set of eight VlanIIndex (VID), with the first octet specifying VIDs 1 through 8, the second octet specifying VIDs 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VID, and the least significant bit represents the highest numbered VID. Thus, each VID is represented by a single bit within the value of this object. If that bit has a value of 1 then that VID is included in the set of VIDs; the VID is not included if its bit has a value of 0. This list represents the entire range of VlanIndex values defined in the scope of IEEE 802.1Q.
TEXTUAL-CONVENTION    
  OCTET STRING Size(512)  

ArubaWiredMclagAggregatorEntry  
SEQUENCE    
  arubaWiredMclagAggregatorIndex InterfaceIndex
  arubaWiredMclagAggregatorType INTEGER
  arubaWiredMclagVlanList VidList
  arubaWiredMclagLoopProtectEnabled TruthValue
  arubaWiredMclagLoadBalanceScheme INTEGER
  arubaWiredMclagCosOverride INTEGER
  arubaWiredMclagDscpOverride INTEGER
  arubaWiredMclagQoSTrust INTEGER

Defined Values

arubaWiredMclagMIB 1.3.6.1.4.1.47196.4.1.1.3.2
This is the MIB module related to HPE Aruba MCLAG feature
MODULE-IDENTITY    

arubaWiredMclagConfig 1.3.6.1.4.1.47196.4.1.1.3.2.1
OBJECT IDENTIFIER    

arubaWiredMclagStatus 1.3.6.1.4.1.47196.4.1.1.3.2.2
OBJECT IDENTIFIER    

arubaWiredMclagIslConfig 1.3.6.1.4.1.47196.4.1.1.3.2.1.1
OBJECT IDENTIFIER    

arubaWiredMclagIslPort 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.1
IfIndex corresponding to the Mclag InterSwitchLink port. A value of 0 means there is no ISL port configuration.
Status: obsolete Access: read-write
OBJECT-TYPE    
  InterfaceIndex  

arubaWiredMclagIslHelloInterval 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.2
ISLP hello interval in seconds. The default value is 1.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Integer32 1..5  

arubaWiredMclagIslHoldTime 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.3
ISL port-flap hold time in seconds. The default value is 0.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

arubaWiredMclagIslHelloTimeout 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.4
ISL hello timeout in seconds. The default value is 3.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Integer32 3..20  

arubaWiredMclagIslDevicePriority 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.5
Mclags on device with lower value of priority will stay UP in the case of split. The default value is 8.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Integer32 1..16  

arubaWiredMclagIslSystemID 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.6
Device identifier. This is advertised over ISL.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

arubaWiredMclagIslPlatformName 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.7
Device type. This is advertised over ISL.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

arubaWiredMclagIslSwVersion 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.8
S/W version running on the device type. This is advertised over ISL.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

arubaWiredMclagIslVIDList 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.9
VLAN IDs that the ISL port is a member of.
Status: obsolete Access: read-only
OBJECT-TYPE    
  VidList  

arubaWiredMclagKeepAliveConfig 1.3.6.1.4.1.47196.4.1.1.3.2.1.2
OBJECT IDENTIFIER    

arubaWiredMclagKeepAliveSrcIPAddrType 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.1
The KeepAlive source address type. It can be IPv4 or IPv6.
Status: obsolete Access: read-write
OBJECT-TYPE    
  InetAddressType  

arubaWiredMclagKeepAliveSrcIPAddr 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.2
The KeepAlive source address. It can be IPv4 or IPv6.
Status: obsolete Access: read-write
OBJECT-TYPE    
  InetAddress  

arubaWiredMclagKeepAliveVrf 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.3
The KeepAlive VRF domain.
Status: obsolete Access: read-write
OBJECT-TYPE    
  DisplayString  

arubaWiredMclagKeepAliveUdpPort 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.4
The KeepAlive UDP port. Same port is used as source and destination UDP ports.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Integer32 1024..65535  

arubaWiredMclagKeepAlivePeerIPAddrType 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.5
The KeepAlive peer address type. It can be IPv4 or IPv6.
Status: obsolete Access: read-write
OBJECT-TYPE    
  InetAddressType  

arubaWiredMclagKeepAlivePeerIPAddr 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.6
The KeepAlive peer address. It can be IPv4 or IPv6.
Status: obsolete Access: read-write
OBJECT-TYPE    
  InetAddress  

arubaWiredMclagKeepAliveHelloInterval 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.7
KeepAlive hello interval in seconds. The default value is 1.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Integer32 1..5  

arubaWiredMclagKeepAliveHelloTimeout 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.8
KeepAlive hello timeout in seconds. The default value is 3.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Integer32 3..20  

arubaWiredMclagKeepAliveDevicePriority 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.9
Device priority that will be advertised via KeepAlive protocol.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

arubaWiredMclagKeepAliveSystemID 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.10
Device identifier that will be advertised via KeepAlive protocol.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

arubaWiredMclagKeepAlivePlatformName 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.11
Device type that will be advertised via KeepAlive protocol.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

arubaWiredMclagKeepAliveSwVersion 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.12
S/W version that will be advertised via KeepAlive protocol.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

arubaWiredMclagAggregatorConfig 1.3.6.1.4.1.47196.4.1.1.3.2.1.3
OBJECT IDENTIFIER    

arubaWiredMclagAggregatorTable 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1
This table supplements the table 'dot3adAggTable' in ieee802.3ad mib.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArubaWiredMclagAggregatorEntry

arubaWiredMclagAggregatorEntry 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1
The fields in this entry will be used to supplement fields of dot3adAggEntry in ieee802.3ad mib.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  ArubaWiredMclagAggregatorEntry  

arubaWiredMclagAggregatorIndex 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.1
The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

arubaWiredMclagAggregatorType 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.2
This field specifies the aggregator/lag type.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER point2Point(1), multiChassis(2)  

arubaWiredMclagVlanList 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.3
VLANs that this aggregator is a member of. This is used for configuration consistency validation.
Status: obsolete Access: read-only
OBJECT-TYPE    
  VidList  

arubaWiredMclagLoopProtectEnabled 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.4
Loop Protect protocol admin state for this MCLAG. This is used for configuration consistency validation.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TruthValue  

arubaWiredMclagLoadBalanceScheme 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.5
Load balance scheme configured for this MCLAG. This is used for configuration consistency validation.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER l2-Src-Dst(1), l3-Src-Dst(2), l4-Src-Dst(3)  

arubaWiredMclagCosOverride 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.6
CoS override configuration for this MCLAG. This is used for configuration consistency validation.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

arubaWiredMclagDscpOverride 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.7
DSCP override configuration for this MCLAG. This is used for configuration consistency validation.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

arubaWiredMclagQoSTrust 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.8
Port QoS trust mode configured for this MCLAG. This is used for configuration consistency validation.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER cos(1), dscp(2)  

arubaWiredMclagIslStatus 1.3.6.1.4.1.47196.4.1.1.3.2.2.1
OBJECT IDENTIFIER    

arubaWiredMclagIslOperState 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.1
ISL operational state.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER init(1), outSync(2), inSync(3)  

arubaWiredMclagIslPduTx 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.2
Number of ISL PDUs transmitted by this device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredMclagIslPduRx 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.3
Number of ISL PDUs received by this device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredMclagIslHelloTx 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.4
Number of ISL Hello packets transmitted by this device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredMclagIslHelloRx 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.5
Number of ISL Hello packets received by this device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredMclagDeviceOperRole 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.6
Operational role of this device derived based on device priority of the 2 devices.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER primary(1), secondary(2)  

arubaWiredMclagDeviceOperSystemID 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.7
System identifier used by this device - derived from system identifier values of the 2 devices.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

arubaWiredMclagKeepAliveStatus 1.3.6.1.4.1.47196.4.1.1.3.2.2.2
OBJECT IDENTIFIER    

arubaWiredMclagKeepAliveOperState 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.1
KeepAlive protocol operational state.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER initialized(1), configured(2), established(3), failed(4), stopped(5)  

arubaWiredMclagKeepAlivePacketsTx 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.2
Number of KeepAlive protocol packets transmitted by this device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredMclagKeepAlivePacketsRx 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.3
Number of KeepAlive protocol packets received by this device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredMclagKeepAlivePacketsDrop 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.4
Number of KeepAlive protocol packets dropped.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredMclagKeepAliveTimeoutCount 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.5
Number of times KeepAlive protocol went to failed state because of KeepAlive timer expiry.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

arubaWiredMclagKeepAliveLastEstablishedTime 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.6
Stores the most recent time KeepAlive handshake was successful and a value of 0 indicates KeepAlive handshake was never established.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TimeTicks  

arubaWiredMclagKeepAliveLastFailedTime 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.7
Stores the most recent time KeepAlive handshake failed and a value of 0 indicates KeepAlive handshake never failed.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TimeTicks  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor