ARRIS-D5-QAM-MIB
File:
ARRIS-D5-QAM-MIB.mib (35428 bytes)
Imported modules
Imported symbols
Defined Types
D5QamRFChannelEntry |
|
SEQUENCE |
|
|
|
|
d5QamRFChannelAnnex |
INTEGER |
|
|
d5QamRFChannelFrequency |
Unsigned32 |
|
|
d5QamRFChannelModulation |
INTEGER |
|
|
d5QamRFChannelFECInterleaverLevel |
INTEGER |
|
|
d5QamRFChannelFECInterleaverMode |
INTEGER |
|
|
d5QamRFChannelPower |
TenthdBmV |
|
|
d5QamRFChannelSpectralInversion |
TruthValue |
|
|
d5QamRFChannelSymbolRate |
Unsigned32 |
|
|
d5QamRFChannelWidth |
Unsigned32 |
|
|
d5QamRFChannelRowStatus |
RowStatus |
|
D5QamStatProgramCounterEntry |
|
SEQUENCE |
|
|
|
|
d5QamStatProgramCounterQamIfIndex |
InterfaceIndex |
|
|
d5QamStatProgramCounterProgram |
D5Program |
|
|
d5QamStatProgramCounterPackets |
Counter32 |
|
D5QamSpareGroupEntry |
|
SEQUENCE |
|
|
|
|
d5QamSpareGroupPrimaryPhysicalIndex |
PhysicalIndex |
|
|
d5QamSpareGroupSparePhysicalIndex |
PhysicalIndex |
|
|
d5QamSpareGroupFailbackMode |
INTEGER |
|
|
d5QamSpareGroupFailoverStatus |
INTEGER |
|
|
d5QamSpareGroupRowStatus |
RowStatus |
|
D5QamDocsisChannelEntry |
|
SEQUENCE |
|
|
|
|
d5QamDocsisChannelDtiOffset |
INTEGER |
|
D5QamSnoopEntry |
|
SEQUENCE |
|
|
|
|
d5QamSnoopProbe |
INTEGER |
|
|
d5QamSnoopTSID |
Unsigned32 |
|
|
d5QamSnoopEncapsulation |
INTEGER |
|
|
d5QamSnoopIpSrc |
IpAddress |
|
|
d5QamSnoopPortSrc |
Unsigned32 |
|
|
d5QamSnoopIpDest |
IpAddress |
|
|
d5QamSnoopPortDest |
Unsigned32 |
|
|
d5QamSnoopRowStatus |
RowStatus |
|
D5QamRFSignalQualityEntry |
|
SEQUENCE |
|
|
|
|
d5QamRFSigQMeasureControl |
INTEGER |
|
|
d5QamRFSigQMeasureDelay |
Unsigned32 |
|
|
d5QamRFSigQMpegLock |
TruthValue |
|
|
d5QamRFSigQBitErrorRate |
Gauge32 |
|
|
d5QamRFSigQUnerroreds |
Counter32 |
|
|
d5QamRFSigQCorrecteds |
Counter32 |
|
|
d5QamRFSigQUncorrectables |
Counter32 |
|
|
d5QamRFSigQSignalNoise |
TenthdB |
|
Defined Values
d5QamMib |
1.3.6.1.4.1.4115.1.8.1.5 |
Arris D5 UEQ QAM Management MIB |
MODULE-IDENTITY |
|
|
|
d5QamRFChannelTable |
1.3.6.1.4.1.4115.1.8.1.5.1.1 |
This table extends docsIfDownstreamChannelTable with extra
RF properties. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
D5QamRFChannelEntry |
|
d5QamRFChannelEntry |
1.3.6.1.4.1.4115.1.8.1.5.1.1.1 |
An entry for a D5 QAM Channel RF Properties |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
D5QamRFChannelEntry |
|
|
d5QamRFChannelAnnex |
1.3.6.1.4.1.4115.1.8.1.5.1.1.1.1 |
The value of this object indicates the conformance of
the implementation to important regional cable standards.
annexA : Annex A from ITU-J83 is used.
annexB : Annex B from ITU-J83 is used.
annexC : Annex C from ITU-J83 is used. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(0), annexA(1), annexB(2), annexC(3) |
|
d5QamRFChannelFrequency |
1.3.6.1.4.1.4115.1.8.1.5.1.1.1.2 |
The center of the downstream frequency associated with
this channel. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
d5QamRFChannelModulation |
1.3.6.1.4.1.4115.1.8.1.5.1.1.1.3 |
The modulation type associated with this downstream
channel. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(0), qam64(6), qam128(7), qam256(8) |
|
d5QamRFChannelFECInterleaverLevel |
1.3.6.1.4.1.4115.1.8.1.5.1.1.1.4 |
This value contains the interleaving level in Annex B standard.
Level 1 (static) is specified for 64-QAM transmission only. This
mode accommodates the installed based of legacy 64-QAM only
digital set top. While in this level, a single interleaving depth
is supported, nameley I=128, J=1.
Level 2 (variable) encompasses both 64-QAM and 256-QAM transmissions
and is capable of supporting variable interleaving, whose depth is
specified in d5QamRFChannelFECInterleaverMode |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
fixed(1), variable(2) |
|
d5QamRFChannelFECInterleaverMode |
1.3.6.1.4.1.4115.1.8.1.5.1.1.1.5 |
This value contain the control word representing a
specific interleaving depth for Annex B level 2 (variable)
interleaving standard, which is one of the following:
0 - I=128 J=1
1 - I=128 J=1
2 - I=128 J=2
3 - I=64 J=2
4 - I=128 J=3
5 - I=32 J=4
6 - I=128 J=4
7 - I=16 J=8
8 - I=128 J=5
9 - I=8 J=16
10 - I=128 J=6
11 - reserved
13 - I=128 J=6
12 - I=128 J=7
14 - I=128 J=8
15 - reserved
16 - reserved |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..10 | 12..14 |
|
d5QamRFChannelPower |
1.3.6.1.4.1.4115.1.8.1.5.1.1.1.6 |
the transmit power associated with this channel. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TenthdBmV |
|
|
d5QamRFChannelSymbolRate |
1.3.6.1.4.1.4115.1.8.1.5.1.1.1.8 |
Symbol rate of current transmission, this value is fixed for
64-QAM and 256-QAM transmission in Annex B standard.
It is variable in Annex A standard and can only be changed
while in this mode. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
3450000..7040000 |
|
d5QamRFChannelWidth |
1.3.6.1.4.1.4115.1.8.1.5.1.1.1.9 |
The distance between the center frequencies of the downstream frequency associated with
this channel. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
6000000..8000000 |
|
d5QamRFChannelRowStatus |
1.3.6.1.4.1.4115.1.8.1.5.1.1.1.99 |
The RowStatus for controlling entries in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
d5QamStatProgramCounterTable |
1.3.6.1.4.1.4115.1.8.1.5.3.1 |
This table contains counters of all MPEG packets whose PIDs
are associated with a program currently being streamed through
a QAM interface |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
D5QamStatProgramCounterEntry |
|
d5QamStatProgramCounterEntry |
1.3.6.1.4.1.4115.1.8.1.5.3.1.1 |
An entry for a single program stream on a QAM interface |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
D5QamStatProgramCounterEntry |
|
|
d5QamSpareGroupTable |
1.3.6.1.4.1.4115.1.8.1.5.4.1 |
This table contains QAM physical entities that are part of
redundancy spare groups. Spare groups are identified by the
spare entity itself through its physical index. A group must
contain 1 to N primaries QAM entities allowing 1:1 or 1:N
redundancy ability. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
D5QamSpareGroupEntry |
|
d5QamSpareGroupEntry |
1.3.6.1.4.1.4115.1.8.1.5.4.1.1 |
Each entry describe a single QAM physical entity and its
relationship to and role within a spare group. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
D5QamSpareGroupEntry |
|
|
d5QamSpareGroupFailbackMode |
1.3.6.1.4.1.4115.1.8.1.5.4.1.1.3 |
Must be 'none' for primary entities. For spare entities, it
defines the failback mode when the fault has cleared. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(0), manual(1), auto(2) |
|
d5QamSpareGroupFailoverStatus |
1.3.6.1.4.1.4115.1.8.1.5.4.1.1.4 |
The status of this physical entity in spare group.
active: indicates that a primary entity is running normally.
indicates that a spare entity has been failed over.
standby: indicates that spare entity is standing by.
switched: indicates that a primary entity has failed over
to spare.
fail: indicates that either primary or spare are not
in service. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), standby(2), switched(3), fail(4) |
|
d5QamSpareGroupRowStatus |
1.3.6.1.4.1.4115.1.8.1.5.4.1.1.99 |
The RowStatus for controlling entries in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
d5QamSpareGroupFailOver |
1.3.6.1.4.1.4115.1.8.1.5.4.2.1 |
This event signifies that a primary QAM physical entity has
been switched over to its spare. |
Status: current |
Access: read-create |
NOTIFICATION-TYPE |
|
|
|
d5QamSpareGroupFailBack |
1.3.6.1.4.1.4115.1.8.1.5.4.2.2 |
This event signifies that a primary QAM physical entity is
no longer switched over to spare, which has been restored to
stand-by duty. |
Status: current |
Access: read-create |
NOTIFICATION-TYPE |
|
|
|
d5QamDocsisChannelEntry |
1.3.6.1.4.1.4115.1.8.1.5.5.1.1 |
An entry for a D5 QAM Channel DOCSIS Properties |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
D5QamDocsisChannelEntry |
|
|
d5QamDocsisChannelDtiOffset |
1.3.6.1.4.1.4115.1.8.1.5.5.1.1.1 |
DOCSIS Timing Interface: offset to be added to egress SYNC
timestamp messages. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
-30000..30000 |
|
d5QamSnoopTable |
1.3.6.1.4.1.4115.1.8.1.5.6.1.1 |
This table lists of QAM channels under snoop. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
D5QamSnoopEntry |
|
d5QamSnoopEntry |
1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1 |
An entry for a single D5 QAM channel snoop |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
D5QamSnoopEntry |
|
|
d5QamSnoopProbe |
1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.1 |
This value returns the probe type for snooping, which can
be one of:
post-mux: probe after muxing stage and before RF modulation
post-rf: probe after RF modulation using builtin demodulator |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
post-mux(1), post-rf(2) |
|
d5QamSnoopTSID |
1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.2 |
After row creation, this value is read only and returns the
current Transport Stream Identifier for this QAM channel.
On row creation, if this value is non-zero, it will be used as
an alternative identifier to ifIndex for the QAM channel;
in which case, ifIndex must be 0. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
d5QamSnoopEncapsulation |
1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.3 |
The value contains the encapsulation type for snooped data. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
udp(0) |
|
d5QamSnoopIpSrc |
1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.4 |
This value returns the source IP address of snooped packets |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
d5QamSnoopPortSrc |
1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.5 |
This value returns the source port of snooped packets |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
d5QamSnoopIpDest |
1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.6 |
This value contains the target IP address of snooped packets |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
d5QamSnoopPortDest |
1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.7 |
This value contains the target port of snooped packets |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
d5QamSnoopRowStatus |
1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.99 |
The RowStatus for controlling entries in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
d5QamSnoopTOS |
1.3.6.1.4.1.4115.1.8.1.5.6.1.2 |
The value is used to fill in the Type Of Service field for egress
IP packets containing snooped data. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..255 |
|
d5QamSnoopVlanPriority |
1.3.6.1.4.1.4115.1.8.1.5.6.1.3 |
The value is used to fill in the VLAN priority field for egress
Ethernet frames containing snooped IP packets. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..7 |
|
d5QamRFSignalQualityEntry |
1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1 |
An entry for a single D5 QAM channel |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
D5QamRFSignalQualityEntry |
|
|
d5QamRFSigQMeasureControl |
1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.1 |
This value indicates wether on-board demodulator scans this
channel for RF signal quality measurement. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(0), scan(1) |
|
d5QamRFSigQMeasureDelay |
1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.2 |
This value contains the amount of time in milliseconds the
demodulator stay on this channel once it has acquired a lock.
The longer the time, the more relevant the measurement, a
value of zero means that only lock status will be a meaningful
measurement. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
d5QamRFSigQMpegLock |
1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.3 |
This value returns whether the on-board demodulator has
acquired a full MPEG lock the last time if was scanning this
channel. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
d5QamRFSigQBitErrorRate |
1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.4 |
This value returns the bit error rate measured during the
last scan period. This value is in the order of 10E-08. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
d5QamRFSigQUnerroreds |
1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.5 |
The value returns the accumulated count of unerrored codewords
for all previous scan periods since this counter was cleared. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
d5QamRFSigQCorrecteds |
1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.6 |
The value returns the accumulated count of corrected codewords
for all previous scan periods since this counter was cleared. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
d5QamRFSigQUncorrectables |
1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.7 |
The value returns the accumulated count of uncorrected codewords
for all previous scan periods since this counter was cleared. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
d5QamRFSigQSignalNoise |
1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.8 |
This value returns the Signal To Noise ratio measured during
the last scan period. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TenthdB |
|
|
d5QamRFObjectGroup |
1.3.6.1.4.1.4115.1.8.1.5.99.1.1 |
The d5QamRF group of objects. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
d5QamStatObjectGroup |
1.3.6.1.4.1.4115.1.8.1.5.99.1.2 |
The d5QamStat group of objects. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
d5QamSpareObjectGroup |
1.3.6.1.4.1.4115.1.8.1.5.99.1.3 |
The d5QamSpare group of objects. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
d5QamDocsisObjectGroup |
1.3.6.1.4.1.4115.1.8.1.5.99.1.4 |
The d5Docsis group of objects. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
d5QamSnoopObjectGroup |
1.3.6.1.4.1.4115.1.8.1.5.99.1.5 |
The d5QamSnoop group of objects. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
d5QamRFSigQObjectGroup |
1.3.6.1.4.1.4115.1.8.1.5.99.1.6 |
The d5QamRFSignalQuality group of objects. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
d5QamCompliance |
1.3.6.1.4.1.4115.1.8.1.5.99.3.1 |
The compliance statement for ARRIS-D5-QAM-MIB. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|